Itfreedumps provides the latest online questions for all IT certifications,

such as IBM, Microsoft, CompTIA, Huawei, and so on.

Hot exams are available below.

AZ-204 Developing Solutions for Microsoft Azure

820-605 Cisco Customer Success Manager

MS-203 Microsoft 365 Messaging

HPE2-T37 Using HPE OneView

300-415 Implementing Cisco SD-WAN Solutions (ENSDWI)

DP-203 Data Engineering on Microsoft Azure

500-220 Engineering Cisco Meraki Solutions v1.0

NACE-CIP1-001 Coating Inspector Level 1

NACE-CIP2-001 Coating Inspector Level 2

200-301 Implementing and Administering Cisco Solutions

Share some 3V0-21.23 exam online questions below.

1.What is a use case for a VMware Cloud Foundation consolidated architecture model?
A. Run customer workloads in separate virtual infrastructure workload domains for scalability and
autonomous licensing.
B. Deploy an SDDC for a small-scale environment that can be extended later.
C. Implement a dedicated management domain for high availability of management workloads.
D. Deploy a large-scale environment with multiple vCenter instances for workload isolation.
Answer: B
Explanation:
The VMware Cloud Foundation consolidated architecture model is designed to support small-scale
environments with the ability to scale as needed. In this model, management and workload domains
are deployed on the same hardware, which is suitable for environments that start small but may need
to expand later. It provides a simplified, cost-effective setup for organizations that want to implement
a software-defined data center (SDDC) with flexibility to grow in the future.

2.An architect is reviewing the security and compliance requirements for a new application that will be
hosted on a vSphere 8 environment.
The following information has been noted about the new application:
The application stores and processes confidential data
The supporting virtual infrastructure is shared with other departments
No other application stores or processes confidential data
The application virtual machines must be able to run on any ESXi host in the cluster
The storage layer is a iSCSI attached SAN
Data at Rest Encryption is in place for each presented LUN validated to FIPS 140-2
No budget is available for additional infrastructure components or software
Application data must not be accessible outside of the application's virtual machines
The architect has been tasked with providing a secure virtual machine design to host the application.
Which three design elements must the architect include to meet the requirements? (Choose three.)
A. Virtual Machine Encryption
B. The vSphere Native Key Provider
C. A new encrypted iSCSI LUN
D. External Key Management Service (KMS) provider
E. A new local VMFS volume
F. VMware vSAN
Answer: A, B, D
Explanation:
Virtual Machine Encryption
To ensure that the application’s confidential data is protected, Virtual Machine Encryption should be
applied. This will ensure that even if someone gains access to the storage layer or the underlying
infrastructure, the data in the virtual machine is encrypted and cannot be accessed outside of the VM,
as required by the security and compliance requirements.
The vSphere Native Key Provider
The vSphere Native Key Provider can be used to manage encryption keys within the vSphere
environment. Since no budget is available for additional infrastructure components or software,
leveraging vSphere's native capabilities for key management ensures that encryption is securely
handled without introducing external dependencies. This also aligns with the requirement to not
introduce additional infrastructure.
External Key Management Service (KMS) provider
While the vSphere Native Key Provider can manage keys within the environment, if there is a
requirement for a more secure or compliant key management solution, an External Key Management
Service (KMS) may be used. The KMS provider allows for centralized management of encryption
keys, ensuring that the keys are securely stored and controlled according to compliance standards
(e.g., FIPS 140-2). Although the Native Key Provider may suffice, this option ensures that key
management adheres to stricter compliance needs, especially for confidential data.

3.An architect is reviewing the information provided by a customer for a new vSphere solution design.
The customer requests that the solution use multiple network connections for the ESXi management
network to increase resilience.
A. Availability
B. Manageability
C. Performance
D. Recoverability
Answer: A
Explanation:
The customer's request to use multiple network connections for the ESXi management network is
aimed at improving the resilience of the network, which directly supports the availability of the
management network. By using multiple network connections (such as NIC teaming), the solution
ensures that if one network connection fails, the other connections can maintain connectivity, thus
improving the availability of the ESXi management network.

4.An architect is discussing the design of a vSphere solution with a customer.

The following requirements have been defined for the solution:
The solution must provide data encryption at rest
The solution must provide the ability to reduce the amount of storage consumed from duplicate data
The solution must minimize the amount of resources consumed by the encryption process.
The architect has made a design decision that VM Encryption will be used to meet these
requirements.
Which two implications should the architect include in the design in relation to this design decision?
(Choose two.)
A. Encryption is a CPU-intensive feature. Resource Pools should be used to assign shares to the
encrypted VMs.
B. When data is encrypted by the storage device, the effectiveness of de-duplication on the storage
will be unaffected.
C. Encryption is a CPU-intensive feature. The ESXi hosts should use the AES-NI BIOS setting to
improve the performance of encryption and reduce CPU utilization.
D. Encryption is a memory-intensive feature. The ESXi hosts should use the AES-NI BIOS setting to
improve the performance of encryption and reduce memory utilization.
E. When data is encrypted by the ESXi host, the effectiveness of de-duplication on the storage may
be reduced.
Answer: C, E
Explanation:
AES-NI BIOS setting:
Encryption, especially VM Encryption in vSphere, is CPU-intensive because it requires the processing
power to encrypt and decrypt data. By enabling AES-NI (Advanced Encryption Standard New
Instructions) in the BIOS, ESXi hosts can take advantage of hardware-based acceleration for
encryption tasks. This reduces the load on the CPU, thus improving the performance of encryption
operations and lowering CPU utilization.
De-duplication effectiveness:
When data is encrypted at the ESXi host level (via VM Encryption), the deduplication process on the
storage system becomes less effective. This is because encrypted data is presented as random data,
meaning that even identical data blocks will appear different due to encryption. Therefore,
deduplication technologies that rely on identifying duplicate data blocks will not be able to achieve the
same level of efficiency when the data is encrypted at rest.

5.What is a benefit of using workload domains in VMware Cloud Foundation?

A. Workload domains require separate instances of vCenter, decreasinq complexity and manaqement
overhead.
B. Workload domains allow for manual provisioninq of vSphere clusters usinq the SDDC Manaqer.
C. Workload domains are pre-configured and automatically deployed according to industry best
practices for SDDC implementation.
D. Each workload domain can only support a maximum of three ESXi hosts, makinq it easy to
manaqe small workloads.
Answer: C
Explanation:
Workload domains in VMware Cloud Foundation provide a way to logically organize and manage
resources within the software-defined data center (SDDC). They are pre-configured and automatically
deployed by SDDC Manager, which follows VMware's industry best practices for architecture and
configuration. This reduces manual effort and complexity, ensuring that the implementation is aligned
with VMware’s recommended configurations.

6.What is an example of a performance design quality?

A. The solution must scale to meet spikes in CPU demand.
B. The solution must provide 40 physical CPU cores and 20 TB of physical memory.
C. The solution must support applications with a maximum tolerable downtime (MTD) of four hours.
D. The solution must support applications with 1,000 transactions per second (TPS).
Answer: A
Explanation:
Performance design quality refers to ensuring that the system can handle the expected load and
operate efficiently under varying conditions. This includes the ability to handle spikes in demand, such
as CPU usage, without degradation in service. The statement "The solution must scale to meet spikes
in CPU demand" addresses how the system will handle sudden increases in workload, ensuring that
the solution meets performance expectations even under peak conditions.

7.An architect is updating an existing design to include a new vSphere cluster to meet the following
customer requirements:
The solution must provide automatic load redistribution of workloads across all resources in the
cluster
The solution must consider the usage patterns of workloads when performing load redistribution
The solution must provide capacity to reserve resources equal to two ESXi hosts for failover in the
event of a host failure
The architect has also collected the following assumptions and constraints during the design
workshops:
A001 - Budget is available for additional hardware and software if required to meet the solution
requirements
A002 - Capacity is available to allow the deployment of additional tooling to manage the solution
C001 - All management workloads must be deployed to the existing vSphere management cluster
Which three design decisions should the architect include to meet the documented requirements?
(Choose three.)
A. The solution will enable the Predictive DRS option to avoid host over-commitment.
B. The solution will enable the Memory Metric for Load Balancing option to avoid host over-
commitment.
C. The solution will deploy VMware Aria Operations to monitor the vSphere environment.
D. The solution will enable the VM Distribution option to avoid host over-commitment.
E. The solution will deploy a Distributed Resource Scheduler (DRS) enabled cluster with sufficient
capacity to meet the workload demands.
F. The solution will deploy a vSphere Distributed Power Management (DPM) enabled cluster with
sufficient capacity to meet the workload demands.
Answer: A, E, F
Explanation:
The solution will enable the Predictive DRS option to avoid host over-commitment.
Enabling Predictive DRS will allow the system to proactively adjust resource distribution based on
anticipated workload patterns. This helps ensure that workloads are redistributed dynamically to avoid
over-commitment and ensures better performance, particularly when considering workload usage
patterns.
The solution will deploy a Distributed Resource Scheduler (DRS) enabled cluster with sufficient
capacity to meet the workload demands.
DRS (Distributed Resource Scheduler) will be used to automatically redistribute workloads across the
cluster resources, ensuring balanced load distribution. It meets the requirement for automatic load
redistribution while also considering workload usage patterns. Additionally, DRS will take into account
the capacity needed to reserve resources equal to two ESXi hosts for failover in the event of a host
failure.
The solution will deploy a vSphere Distributed Power Management (DPM) enabled cluster with
sufficient capacity to meet the workload demands.
vSphere DPM enables the cluster to automatically adjust the number of active hosts based on the
workload demands, ensuring efficient resource usage. It helps meet the requirement for ensuring
capacity for failover by turning off unneeded hosts and allowing the remaining hosts to handle the
workload.

8.An architect is designing a new vSphere-based solution for a customer.

During a requirements gathering workshop, the following information is provided:
The solution must have a primary and secondary (isolated) environment
The solution must support orchestration to address application dependencies
The isolated environment must be able to scale on demand in case of a DR scenario
The solution is managed through a single interface
Which solution should the architect include in this design?
A. Site Recovery Manager with dedicated hardware
B. Disaster Recovery with VMware Cloud on AWS
C. vSAN stretched cluster
D. A dedicated fault domain
Answer: B
Explanation:
This solution aligns with the requirements of having a primary and secondary isolated environment,
orchestration of application dependencies, the ability to scale on demand in a disaster recovery (DR)
scenario, and a single interface for management. VMware Cloud on AWS integrates with VMware's
vSphere environment and offers orchestration for DR, as well as the flexibility to scale resources on
demand in the event of a DR scenario. It also provides a unified management interface through
vCenter.

9. Hosts Configuration:
- Each host has 24 physical cores and 768 GB of RAM.
- Since the maximum vCPU-to-core ratio for production is 10:1, each host can support 240 vCPUs (24
cores x 10).
- For development, with a ratio of 20:1, each host can support 480 vCPUs (24 cores x 20).

10.An architect is tasked with an application migration to a new VMware Cloud platform. The
application service owner assistance from the architect to identify the technical requirements of the
application.
The following has been made available following initial discussions:
A VMware Aria Operations report containing current resource usage
The output from a planning session including a roadmap for planned service growth
A service dependency map from the company’s IT operations management tool
The desired consolidation ratio for the target platform is 10:1
The applications hosting budget is reducing by 10%
Which two contain the technical requirements of the application? (Choose two.)
A. The output from a planning session including a roadmap for planned service growth
B. The desired consolidation ratio for the target platform is 10:1
C. A VMware Aria Operations report containing current resource usage
D. The applications hosting budget is reducing by 10%
E. A service dependency map from the company's IT operations management tool
Answer: B, C
Explanation:
The desired consolidation ratio for the target platform is 10:1:
The consolidation ratio is a key technical requirement as it directly influences the planning for the
deployment and resource allocation in the new VMware Cloud platform. It defines how many virtual
machines can be consolidated per physical host in the target environment, which is critical for the
sizing and resource planning.
A VMware Aria Operations report containing current resource usage:
The VMware Aria Operations report provides actual data on the current resource consumption of the
application. This report is essential for understanding how much resource the application currently
uses and helps in determining the necessary capacity in the target platform. This is a technical
requirement since it informs resource allocation, scaling, and performance expectations.

11.An architect is working on the design documentation for a new vSphere solution. The architect has
completed a conceptual model based on the following requirement:
REQ001 C The solution must use shared storage
What could the architect include in the logical design to meet this requirement?
A. The use of an NFS mount point, including the IP address of the NFS server it is hosted on
B. The use of an all flash vSAN datastore
C. The use of an HCI solution for a datastore
D. The use of File Based Storage, including the list of permissions applied to the share
Answer: A
Explanation:
The requirement specifies that the solution must use shared storage, which refers to a storage
solution that can be accessed by multiple ESXi hosts simultaneously. NFS (Network File System) is a
widely used method for providing shared storage in a vSphere environment. By including the NFS
mount point and the IP address of the NFS server, the architect can specify how the shared storage
will be configured and accessed by the ESXi hosts, meeting the requirement for shared storage.

12.An architect is designing a new workload domain in an existing VMware Cloud Foundation
environment. The customer requirement is to physically separate the vSAN network traffic from other
management network flows.
Which design decision should the architect make to meet this requirement?
A. Deploy the new workload domain using a vSAN stretched cluster.
B. Deploy the new workload domain using multiple physical adapters.
C. Deploy the new workload domain using SDDC Manager.
D. Deploy the new workload domain using API.
Answer: B
Explanation:
To physically separate the vSAN network traffic from other management network flows, the architect
should configure the workload domain with multiple physical adapters. This will ensure that the vSAN
traffic (which uses specific network ports and protocols) is isolated from other management traffic. By
using separate physical adapters, the network traffic for each type can be kept distinct, reducing the
risk of congestion and ensuring that each traffic type has dedicated bandwidth.

13.An architect is tasked with designing a solution to monitor the operational state of a VMware Cloud
Foundation environment through ad-hoc reporting and custom dashboards, alerts, and notifications.
Using VMware Validated Solutions, which validated solution can the architect leverage to meet this
requirement?
A. Private Cloud Automation for VMware Cloud Foundation
B. Intelligent Operations Management for VMware Cloud Foundation
C. VMware Validated Design for VMware Cloud Foundation Heath Reporting and Monitoring for
VMware Cloud Foundation
Answer: B
Explanation:
Intelligent Operations Management for VMware Cloud Foundation is designed to help monitor the
operational state of a VMware Cloud Foundation environment. It provides capabilities for ad-hoc
reporting, custom dashboards, alerts, and notifications. This validated solution ensures
comprehensive monitoring and management of the environment, addressing the requirements for
reporting and monitoring the operational state of the infrastructure.

14.An architect is tasked with updating the design of an existing vSphere-based solution for a
pharmaceuticals customer. The update will include upgrade to VMware vCenter 8 and VMware
vSphere 8 and the creation of a new cluster that will be used for ongoing research projects. The
research project that is driving the need for an update includes a number of applications that are
latency-sensitive.
The customer has confirmed the following information during the initial workshop:
The customer recently completed a right sizing exercise using VMware Aria Operations that resulted
in a number of ESXi hosts becoming available for use.
Each of the VMware ESXi host servers is configured with:
-- 2 x 20-core Intel Xeon CPU sockets
-- 1024 GB RAM divided evenly between sockets There is no additional budget for purchasing
hardware.
After confirming the existing hardware is still listed on the VMware Hardware Compatibility List (HCL),
the architect makes the following design decisions with regard to the workload design:
The solution will support a maximum of 20 combined cores and sockets per virtual machine.
The solution will support a maximum of 512 GB RAM per virtual machine.
What should the architect document as justification for these design decisions?
A. The maximum supported configuration will ensure efficient use of RAM by sharing memory pages
between virtual machines.
B. The maximum supported configuration will ensure the virtual machines will adhere to a single Non-
Uniform Memory Access (NUMA) node boundary.
C. The maximum supported configuration will ensure each virtual machine will exclusively consume a
whole CPU socket.
D. The maximum supported configuration will allow the creation of virtual machines that cross NUMA
node boundaries resulting in improved overall performance.
Answer: B
Explanation:
NUMA (Non-Uniform Memory Access) is a system architecture in which a multiprocessor system is
divided into multiple memory nodes. Each NUMA node typically has its own local memory that is
faster to access than remote memory from other nodes.
In this case, each ESXi host has two CPU sockets (each with 20 cores) and 1024 GB of RAM divided
evenly between the two sockets, meaning there are two NUMA nodes in each host.
By limiting the virtual machine to a maximum of 20 cores and sockets per virtual machine, and 512
GB of RAM, this ensures that each virtual machine will fit within a single NUMA node, preventing the
virtual machine from crossing NUMA node boundaries. This design helps maintain better memory
access performance and avoids potential performance degradation that can occur when a VM
accesses memory across NUMA nodes.

15.An architect is holding a design workshop with a customer for a new solution.
The customer states that the new solution needs to provide the following capabilities:
Automated deployment and lifecycle management of the vSphere platform Self-Service deployment
of virtual machines and other objects from a central catalog
Monitoring, logging and analytic tooling to provide visibility and troubleshooting of the whole solution
Support deployment via infrastructure-as-code methods for the additional management components
The customer also requests that the solution be as cost-effective as possible while still delivering a
fast time to value for the organization.
Which design approach should the architect recommend to meet these requirements?
A. Use VMware Validated Designs for the vSphere solution and VMware Validated Solutions for the
additional components
B. Use VMware Cloud Foundation for the vSphere solution and VMware Validated Solutions for the
additional components
C. Use VMware Cloud Foundation for the vSphere solution and a custom design for the additional
components
D. Use a custom design for the vSphere solution and VMware Validated Solutions for the additional
components
Answer: B
Explanation:
The customer has outlined the following requirements:
Automated deployment and lifecycle management of the vSphere platform: This requires a solution
that provides automated provisioning, management, and updates. VMware Cloud Foundation (VCF)
is an integrated platform that provides automation for the lifecycle of the vSphere platform, including
updates and patch management.
Self-Service deployment of virtual machines and other objects from a central catalog: VMware Cloud
Foundation includes tools like vRealize Automation (part of VCF) that enable self-service provisioning
of virtual machines and other resources. Additionally, VCF provides centralized management for
provisioning and orchestration.
Monitoring, logging, and analytic tooling for visibility and troubleshooting: VMware Cloud Foundation
integrates with vRealize Operations and vRealize Log Insight, which provides visibility, monitoring,
and logging capabilities for the entire solution. These tools help in analytics and troubleshooting
across the entire infrastructure.
Support deployment via infrastructure-as-code methods for additional management components:
VMware Validated Solutions (such as vRealize Automation or vRealize Orchestrator) provide
infrastructure-as-code capabilities, ensuring that the solution can be deployed in a consistent,
repeatable manner, automating deployments of not just vSphere but also additional management
components.
Cost-effectiveness with a fast time to value: VMware Cloud Foundation offers an integrated solution
that is pre-configured and validated, which speeds up deployment and reduces operational
 complexity. By using VMware Validated Solutions for additional management components, the
customer can leverage existing, tested solutions that are optimized for use with VCF, ensuring cost-
effectiveness while meeting requirements.

Get 3V0-21.23 exam dumps full version.

Powered by TCPDF (www.tcpdf.org)