TECHNICAL PRODUCT

DATA SHEET
NSF-Approved 800 Series Flowmeter

The 800 series flowmeters are designed to give high

performance and competitive pricing with 6 flow ranges
from 0.05 to 15 L/min. NSF-approved for use in food
and beverage production, its totally non-metallic wetted
components also makes the 800 series flowmeter an ideal
choice for use within the medical and pharmaceutical
industries. It is also suitable for metering aggressive
chemicals including ultra-pure water. The standard inlet
tubes are barbed to accept two hose sizes, 8mm and
12mm, although alternative sizes and cable lengths are
available for OEM use. The bearings are made of sapphire
for long life and reliability, the body is moulded PVDF as
standard, and the ‘O’ ring seal is typically Viton™.

IDEAL FOR
• Liquid batching / dosing
• Food and beverage
• Laboratory tests
• Cooling equipment
• Active flow alarms
• Semiconductor plant
FEATURES
• Low cost
• Engine test
• NSF-Approved for use in food and beverage production
• PVDF (PP body available on request)
• 1- 2% FSD
• Sapphire bearings
• Hall Effect sensor
• 6 Flow ranges
• Pulse output (NPN Standard with PNP Option)
• 10 bar rating
• Viton™ seal as standard
• 8mm and 12mm hose; ⅜ John Guest connection
• 0.1% Repeatability
• 4.5 to 24Vdc
• -25°C Min to 125°C Max
• IP65
• Standard cable length of 2m

TITAN ENTERPRISES LTD.

www.flowmeters.co.uk
800 Series Flowmeter

At the heart of the meter is a precision turbine that rotates

freely on robust sapphire bearings and contains over-moulded
magnets that are detected through the chamber wall by a Hall
effect detector. The output is a stream of NPN/PNP pulses that
are readily interfaced with most electronic display or recording
devices, such as Titan’s Pulsite® Solo. The combination
of materials and technology ensures a long life product with
Ordering Codes
reliable operation throughout. There are two temperature
Model
options of 125°C or 60°C. The 60°C unit is fitted with two LEDs
803
to monitor the power and pulse output.
815
845
865
810
824 TECHNICAL SPECIFICATIONS
Seal Materials
V = Viton™ Model Flow range Linearity Typical Approx
N = Nitrile L/Min % FSD Freq. Hz. ‘K’ Factor
E = EPDM
803 0.05 - 0.5 2.0 142 17000
S = Silicon
Output Options 815 0.12 - 1.5 2.0 175 7000
O = Standard NPN (<125°C)
845 0.20 - 4.5 1.5 260 3500
2 = NPN – PNP (< 60°C)
Body Material 865 0.25 - 6.5 1.5 230 2100
P = PVDF
810 0.30 - 10.0 1.0 235 1420
Calibration
O = Standard 824 0.50 - 15.0 1.0 245 980
U = Uncalibrated
Weight 0.050kg
Options
- Poly Pulsite Solo
- JG 800 Series Flowmeter

e.g. 865-VOP-O is a flow range of 0.25 to

6.5 L/min, Viton™ seal, standard NPN, PVDF
bodied flowmeter with a 6 point traceable water
calibration and no additional options. Hall sensor
Coil Pulse Reed

Standard Materials of Construction + -

_
- - V+ I 0V
0V External PSU
Amplifier and
Body and cap - PVDF Pull Up Resistor +V Connections
trigger circuit

‘O’ Ring seal - Viton™ (10K Typ.)

0V - Screen

Magnets - Over-moulded Sensor Supply - Red Voltage

Pulse - Blue regulator
Bearings - Sapphire

10KΩ

TITAN ENTERPRISES LTD. 0V O/P +V

Coldharbour Business Park, Sherborne, Dorset DT9 4JW Sensor block
diagram
Tel: +44 (0)1935 812790
Email: [email protected]
Web: www.flowmeters.co.uk For reference only; for latest information contact your local distributor.
09/23