LEARNING PLAN

UNIT CODE:
Unit of competence: FIRE CONTROL SYSTEMS

Name of the Trainer:

Teaching Practice Institution:

Date of Preparation: 11/01/2025

Skill or Job task

This unit specifies the competencies required to install fire control systems. It involves preparing working drawings, selecting tools and equipment
for installation, quantify and cost materials and supplies, install sprinkler systems, install hose reel systems, install wet and dry risers and maintain
and service fire suppression systems. It applies in the construction industry.

Benchmark
1. Prepare working drawing
2. Select tools and equipment
3. Quantify materials and supplies
4. Install sprinkler systems
5. Install hose reel systems
6. Install wet and dry risers
7. Maintain and service fire suppression systems

Week 1 to 6 Learning Plan: Fire Control Systems

Week Session Session Title Learning Outcomes Trainer Trainee Resources & Learning Reflections
No. Activities Activities References Checks / & Date
Assessments

Week 1 Terms and By the end of the - Lecture on - Participate in - Fire safety - Written
1 Concepts in Fire session, trainees fire control discussions - manuals - quiz - Oral
Control Systems should be able to: terminology - Identify fire Online questioning
Provide real- control terms resources
i. Define key
world case
terms in fire
studies
control
systems
ii. Explain fire
control
concepts
Week 2 Symbols, By the end of the - Explain fire - Analyze fire - Fire control - Group
1 Measurements, session, trainees control control symbols diagrams - discussion -
and Types of should be able to: symbols - - Perform Measuring Practical test
Scales Demonstrate practical tools
i. Identify
measurement measurements
symbols used
techniques
in fire control
systems
ii. Explain
measurement
techniques
and types of
scales
Week 1 Types of By the end of the - Demonstrate - Interpret fire - Technical - Practical
2 Drawings in Fire session, trainees different control plans - manuals - exercise -
Control Systems should be able to: drawing types Compare Fire safety Trainer
- Guide drawing types guides feedback
i. Differentiate
trainees in
types of fire
reading plans
 control system
drawings
ii. Interpret fire
protection
plans
Week 2 PPEs and Their By the end of the - Explain PPE - Wear and - OSHA - Practical
2 Use in Fire session, trainees categories - inspect PPE - guidelines - assessment -
Control should be able to: Demonstrate Discuss PPE PPE samples Trainer
Installations correct usage effectiveness evaluation
i. Identify
different types
of PPEs
ii. Demonstrate
proper use of
PPEs in fire
control
installation
Week 1 Use of Fire By the end of the - Demonstrate - Identify fire - Installation - Practical
3 Control session, trainees tool handling control tools - manuals - test - Trainer
Installation should be able to: techniques - Apply tools in Tool catalogs feedback
Tools and Provide hands- practice
i. Identify fire
Equipment on training
control
installation
tools
ii. Demonstrate
the use of
tools for
installation
Week 2 Safety, Care, By the end of the - Explain - Inspect and - - Written test
3 and session, trainees maintenance maintain tools - Maintenance - Group
Maintenance of should be able to: protocols - Document guides - discussion
Fire Control Assign maintenance Safety
i. Explain
Tools records manuals
maintenance
 procedures for maintenance
fire control exercises
tools
ii. Demonstrate
safety
practices in
tool handling
Week 1 Storage of Fire By the end of the - Demonstrate - Arrange tools - Warehouse - Practical
4 Control session, trainees tool storage in a storage management exercise -
Installation should be able to: best practices - facility - books - Fire Trainer
Tools and Guide trainees Compare safety evaluation
i. Explain proper
Equipment in organizing storage guidelines
storage
storage areas methods
techniques for
fire control
tools
ii. Demonstrate
correct storage
procedures
Week 2 Practical: Fire By the end of the - Supervise - Install fire - Fire safety - Practical
4 Control System session, trainees installation control codes - test - Peer
Installation should be able to: exercises - components - Installation review
Provide Verify guides
i. Install a basic
feedback on installation
fire control
proper safety
system
ii. Demonstrate techniques
compliance
with safety
guidelines
Week 1 Continuous By the end of the - Conduct CAT - Attempt CAT - - Past test - Written CAT
5 Assessment Test session, trainees - Provide Review papers - Fire -
(CAT) should be able to: structured test answers with safety Performance
questions trainer textbooks evaluation
 i. Demonstrate
knowledge of
fire control
systems
ii. Apply
theoretical
knowledge in a
test scenario
Week 2 Analysis of CAT By the end of the - Discuss - Review - Exam - Self-
5 Results and session, trainees common mistakes - answer reflection
Feedback should be able to: errors - Participate in guides - report -
Provide discussion Trainer Trainer
i. Analyze test
individualized forums feedback assessment
performance
feedback
ii. Implement
feedback to
improve
understanding
Week 1 Final Practical: By the end of the - Supervise - Perform fire - Fire safety - Final
6 Fire Control session, trainees installation of control tasks - regulations - assessment -
Systems should be able to: fire systems - Validate system Building site Peer review
Provide real- effectiveness
i. Install and test
world
fire control
simulation
components
ii. Validate
compliance
with fire safety
regulations
Week 2 Final Review By the end of the - Facilitate an - Reflect on - Course - Written
6 and Closing session, trainees open learning materials - reflection -
Session should be able to: discussion - process - Trainer Group
Provide closing Identify areas feedback discussion
i. Review the remarks and for
learning evaluations improvement
outcomes
ii. Discuss key
takeaways
from the
training
Week Session Session Title Learning Outcomes Trainer Trainee Resources & Learning Reflections
No. Activities Activities References Checks / & Date
Assessments

Week 1 Terms and By the end of the - Lecture on fire - Participate in - Fire safety - Written quiz
7 Concepts in session, trainees control discussions - manuals - - Oral
Fire Control should be able to: terminology - Identify fire Online questioning
Systems Provide real- control terms resources
i. Define key
world case
terms in fire
studies
control systems
ii. Explain fire
control
concepts
Week 2 Fire Control By the end of the - Discuss fire - Analyze - Fire safety - Group
7 Installation session, trainees control material manuals - discussion -
Materials and should be able to: materials - properties - Construction Practical
Supplies Provide Compare guides assessment
i. Identify
material different
materials used
samples supplies
in fire control
systems
ii. Explain fire
control
material
specifications
Week 1 Fire Control By the end of the - Demonstrate - Identify fire - Technical - Practical test
2 Fittings and session, trainees fire fittings - fittings - Create manuals - - Trainer
Material should be able to: Guide material material Safety guides feedback
Schedule scheduling schedules
i. Identify
different fire
control fittings
 ii. Develop a
material
schedule for
fire control
installation
Week 2 Estimation By the end of the - Explain cost - Calculate - Costing - Written
2 and Cost of session, trainees estimation material costs - guides - Fire assessment -
Quantities should be able to: techniques - Compare cost control Trainer
Provide estimation pricing evaluation
i. Estimate fire
calculation methods manuals
control
exercises
installation
costs
ii. Perform
quantity take-
off calculations
Week 1 Classification By the end of the - Discuss fire - Identify fire - Fire safety - Practical
3 of Fire and session, trainees classifications - classes - codes - assessment -
Sprinkler should be able to: Explain types of Compare Sprinkler Written quiz
Systems sprinklers sprinkler guides
i. Explain
systems
different fire
classifications
ii. Identify
sprinkler
systems and
their
applications
Week 2 Automatic By the end of the - Demonstrate - Compare fire - Technical - Practical test
3 Fire Detectors session, trainees fire detectors - detectors - manuals - - Trainer
and Pipe should be able to: Provide pipe Identify Industry feedback
Types classification different pipes guides
i. Identify
charts
different
 automatic fire
detectors
ii. Differentiate
types of pipes
used in fire
control
installations
Week 1 Types of By the end of the - Demonstrate - Perform joint - Fire system - Practical
4 Joints, session, trainees joint and fitting - Apply manuals - assessment -
Connections, should be able to: connection setting out Installation Trainer
and Setting techniques - methods tools evaluation
i. Identify
Out Supervise
different joints
setting out
and
connections
ii. Demonstrate
setting out
techniques for
fire control
installations
Week 2 Bending, By the end of the - Supervise - Perform pipe - Fire system - Practical test
4 Fitting, and session, trainees bending and bending - codes - Safety - Peer review
Fire Control should be able to: fitting - Explain Conduct manuals
System air, smoke, and system testing
i. Perform pipe
Testing pressure
bending and
testing
fitting
ii. Demonstrate
different fire
system testing
methods
Week 1 Fault By the end of the - Discuss fault - Analyze faults - - Written quiz
5 Identification session, trainees identification - Demonstrate Maintenance - Group
and Valves should be able to: methods - discussion
 i. Identify Demonstrate valve manuals - Fire
common fire valve functionality safety guides
control system operations
faults
ii. Explain the role
of valves in fire
systems
Week 2 Adhesives, By the end of the - Demonstrate - Apply - Technical - Practical test
5 Fittings, and session, trainees adhesive adhesives and manuals - Fire - Trainer
Safety should be able to: applications - fittings - safety laws feedback
Regulations Discuss fire Research
i. Identify
control safety safety
adhesives and
laws regulations
fittings used in
fire control
ii. Explain
occupational
safety and legal
frameworks
Week 1 Final Practical: By the end of the - Supervise - Perform fire - Fire safety - Final
6 Fire Control session, trainees installation of control tasks - regulations - assessment -
Systems should be able to: fire systems - Validate Building site Peer review
Provide real- system
i. Install and test
world effectiveness
fire control
simulation
components
ii. Validate
compliance
with fire safety
regulations
Week 2 Final Review By the end of the - Facilitate an - Reflect on - Course - Written
6 and Closing session, trainees open learning materials - reflection -
Session should be able to: discussion - process - Trainer Group
Provide closing Identify areas feedback discussion
i. Review the remarks and for
learning evaluations improvement
outcomes
ii. Discuss key
takeaways
from the
training