Scribd
Upload
16 views

SCBA Cylinder Hydrostatic Test

The document contains hydrostatic test inspection certificates for Self-Contained Breathing Apparatus (SCBA) cylinders issued to Bohai Drilling Engineering Company on 06-06-2024. Each certificate confirms that the cylinders, manufactured by Drager, passed inspection and are safe to operate, with the next examination scheduled for 05-06-2027. No defects were found during the inspections, and all components were deemed functional.

Uploaded by

cataflam80
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
16 views

SCBA Cylinder Hydrostatic Test

The document contains hydrostatic test inspection certificates for Self-Contained Breathing Apparatus (SCBA) cylinders issued to Bohai Drilling Engineering Company on 06-06-2024. Each certificate confirms that the cylinders, manufactured by Drager, passed inspection and are safe to operate, with the next examination scheduled for 05-06-2027. No defects were found during the inspections, and all components were deemed functional.

Uploaded by

cataflam80
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

scan QR anD

check

GPS-IMS-CAL-F-15
REV-02
check
SCBA Cylinder Hydrostatic Test Inspection
Customer: Bohai Drilling Engineering Company {BHDC- 98 }
Date of receiving : 06-06-2024 Date of issuing : 06-06-2024

Certificate No GPS-BHDC-24-26-SCBA01 Type of Certificate Hydrostatic Inspection

Tested as per manufacturer recommendation and ASME code section V article 10 & 27.

Work Test Date of


Description
Pressure Pressure Examination
Self-Contained Breathing Apparatus (SCBA)
06-06-2024
Cylinder SN : C22150074
Manufactory : Drager
Model : CRP III-144-6.8-30-T Date of Next
300 BAR 450 BAR
Weight : 3.9 KG Examination
Volume : 6.8 L
Contents : Air
Thread : M18 x 1.5
05-06-2027

Warning : If fibre has been damaged filling is forbidden

Inspection Remarks
Cylinder YES √ NO --- pass
Remote Pressure Indicator YES --- NO --- ---
Harness YES --- NO --- ---
Alarm YES --- NO --- ---
Quick Charge Adapter YES --- NO --- ---
Mask YES --- NO --- ---
Regulator YES --- NO --- ---
Face piece YES --- NO --- ---

Identification of any part found to have a defect which is or could become a danger to persons and a description of the defect: NONE
Particulars of any repair, renewal or alteration required to remedy the defect identified above: NONE
Particulars of any tests carried out as part of the examination: NONE
SAFE TO OPERATE AT TIME OF INSPECTION

Name of person making this report Name of person authenticating this report
Tariq Ramadan Amr Brekaa

c
scan QR anD
check

GPS-IMS-CAL-F-15
REV-02
check
SCBA Cylinder Hydrostatic Test Inspection
Customer: Bohai Drilling Engineering Company {BHDC- 98 }
Date of receiving : 06-06-2024 Date of issuing : 06-06-2024

Certificate No GPS-BHDC-24-26-SCBA02 Type of Certificate Hydrostatic Inspection

Tested as per manufacturer recommendation and ASME code section V article 10 & 27.

Work Test Date of


Description
Pressure Pressure Examination
Self-Contained Breathing Apparatus (SCBA)
06-06-2024
Cylinder SN : C22173099
Manufactory : Drager
Model : CRP III-144-6.8-30-T Date of Next
300 BAR 450 BAR
Weight : 3.9 KG Examination
Volume : 6.8 L
Contents : Air
Thread : M18 x 1.5
05-06-2027

Warning : If fibre has been damaged filling is forbidden

Inspection Remarks
Cylinder YES √ NO --- pass
Remote Pressure Indicator YES --- NO --- ---
Harness YES --- NO --- ---
Alarm YES --- NO --- ---
Quick Charge Adapter YES --- NO --- ---
Mask YES --- NO --- ---
Regulator YES --- NO --- ---
Face piece YES --- NO --- ---

Identification of any part found to have a defect which is or could become a danger to persons and a description of the defect: NONE
Particulars of any repair, renewal or alteration required to remedy the defect identified above: NONE
Particulars of any tests carried out as part of the examination: NONE
SAFE TO OPERATE AT TIME OF INSPECTION

Name of person making this report Name of person authenticating this report
Tariq Ramadan Amr Brekaa

c
scan QR anD
check

GPS-IMS-CAL-F-15
REV-02
check
SCBA Cylinder Hydrostatic Test Inspection
Customer: Bohai Drilling Engineering Company {BHDC- 98 }
Date of receiving : 06-06-2024 Date of issuing : 06-06-2024

Certificate No GPS-BHDC-24-26-SCBA03 Type of Certificate Hydrostatic Inspection

Tested as per manufacturer recommendation and ASME code section V article 10 & 27.

Work Test Date of


Description
Pressure Pressure Examination
Self-Contained Breathing Apparatus (SCBA)
06-06-2024
Cylinder SN : C22222084
Manufactory : Drager
Model : CRP III-144-6.8-30-T Date of Next
300 BAR 450 BAR
Weight : 3.9 KG Examination
Volume : 6.8 L
Contents : Air
Thread : M18 x 1.5
05-06-2027

Warning : If fibre has been damaged filling is forbidden

Inspection Remarks
Cylinder YES √ NO --- pass
Remote Pressure Indicator YES --- NO --- ---
Harness YES --- NO --- ---
Alarm YES --- NO --- ---
Quick Charge Adapter YES --- NO --- ---
Mask YES --- NO --- ---
Regulator YES --- NO --- ---
Face piece YES --- NO --- ---

Identification of any part found to have a defect which is or could become a danger to persons and a description of the defect: NONE
Particulars of any repair, renewal or alteration required to remedy the defect identified above: NONE
Particulars of any tests carried out as part of the examination: NONE
SAFE TO OPERATE AT TIME OF INSPECTION

Name of person making this report Name of person authenticating this report
Tariq Ramadan Amr Brekaa

c
scan QR anD
check

GPS-IMS-CAL-F-15
REV-02
check
SCBA Cylinder Hydrostatic Test Inspection
Customer: Bohai Drilling Engineering Company {BHDC- 98 }
Date of receiving : 06-06-2024 Date of issuing : 06-06-2024

Certificate No GPS-BHDC-24-26-SCBA04 Type of Certificate Hydrostatic Inspection

Tested as per manufacturer recommendation and ASME code section V article 10 & 27.

Work Test Date of


Description
Pressure Pressure Examination
Self-Contained Breathing Apparatus (SCBA)
06-06-2024
Cylinder SN : C22150134
Manufactory : Drager
Model : CRP III-144-6.8-30-T Date of Next
300 BAR 450 BAR
Weight : 3.9 KG Examination
Volume : 6.8 L
Contents : Air
Thread : M18 x 1.5
05-06-2027

Warning : If fibre has been damaged filling is forbidden

Inspection Remarks
Cylinder YES √ NO --- pass
Remote Pressure Indicator YES --- NO --- ---
Harness YES --- NO --- ---
Alarm YES --- NO --- ---
Quick Charge Adapter YES --- NO --- ---
Mask YES --- NO --- ---
Regulator YES --- NO --- ---
Face piece YES --- NO --- ---

Identification of any part found to have a defect which is or could become a danger to persons and a description of the defect: NONE
Particulars of any repair, renewal or alteration required to remedy the defect identified above: NONE
Particulars of any tests carried out as part of the examination: NONE
SAFE TO OPERATE AT TIME OF INSPECTION

Name of person making this report Name of person authenticating this report
Tariq Ramadan Amr Brekaa

c
scan QR anD
check

GPS-IMS-CAL-F-15
REV-02
check
SCBA Cylinder Hydrostatic Test Inspection
Customer: Bohai Drilling Engineering Company {BHDC- 98 }
Date of receiving : 06-06-2024 Date of issuing : 06-06-2024

Certificate No GPS-BHDC-24-26-SCBA05 Type of Certificate Hydrostatic Inspection

Tested as per manufacturer recommendation and ASME code section V article 10 & 27.

Work Test Date of


Description
Pressure Pressure Examination
Self-Contained Breathing Apparatus (SCBA)
06-06-2024
Cylinder SN : C22222135
Manufactory : Drager
Model : CRP III-144-6.8-30-T Date of Next
300 BAR 450 BAR
Weight : 3.9 KG Examination
Volume : 6.8 L
Contents : Air
Thread : M18 x 1.5
05-06-2027

Warning : If fibre has been damaged filling is forbidden

Inspection Remarks
Cylinder YES √ NO --- pass
Remote Pressure Indicator YES --- NO --- ---
Harness YES --- NO --- ---
Alarm YES --- NO --- ---
Quick Charge Adapter YES --- NO --- ---
Mask YES --- NO --- ---
Regulator YES --- NO --- ---
Face piece YES --- NO --- ---

Identification of any part found to have a defect which is or could become a danger to persons and a description of the defect: NONE
Particulars of any repair, renewal or alteration required to remedy the defect identified above: NONE
Particulars of any tests carried out as part of the examination: NONE
SAFE TO OPERATE AT TIME OF INSPECTION

Name of person making this report Name of person authenticating this report
Tariq Ramadan Amr Brekaa

You might also like