0% found this document useful (0 votes)
14 views

Airport Engineering MCQ

The document contains over 300 multiple-choice questions (MCQs) related to Airport Engineering, covering various topics such as ICAO recommendations, runway specifications, and airport capacity. Each question is accompanied by its correct answer, providing a comprehensive resource for students and professionals preparing for exams or interviews in the field. Additionally, it includes links to related topics and resources for further study.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
14 views

Airport Engineering MCQ

The document contains over 300 multiple-choice questions (MCQs) related to Airport Engineering, covering various topics such as ICAO recommendations, runway specifications, and airport capacity. Each question is accompanied by its correct answer, providing a comprehensive resource for students and professionals preparing for exams or interviews in the field. Additionally, it includes links to related topics and resources for further study.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 13

HOME Interview Questions MCQs Class Notes *LAB VIVA SEMINAR TOPICS

ONLINE TEST GATE CAT Internship ABOUT US

Any Skill Sea


Home » AIRPORT ENGINEERING Questions » 300+ TOP
AIRPORT ENGINEERING Objective Type Questions and
Answers

300+ TOP AIRPORT


ENGINEERING Objective Type
Questions and Answers
Airport Engineering MCQs :-
1. As per ICAO recommendation, minimum width of
safety area for instrumental runway should be
a) 78 m
b) 150 m
c) 300 m
d) 450 m
Ans: c

2. As per ICAO, for A, B, and C type of airports, maximum


effective, transverse and longitudinal grades in
percentage respectively are
a) 1.0, 1.5 and 1.5
b) 1.0, 1.5 and 2.0
c) 1.5, 1.5 and 2.0
d) 2.0, 2.0 and 2.0
Ans: a

3. As per ICAO recommendation, the rate of change of


longitudinal gradient per 30 m length of vertical curve for
A and B type of airports is limited to a maximum of
a) 0.1 %
b) 0.2% 
c) 0.3 %
d) 0.4%
Ans: a

Airport Engineering mcqs

4. Assertion A : The ratio of arriving and departing


aircrafts influences the airport
capacity: Reason R :Landing operation is generally given
priority over the taking off operation.
Select your answer based on the coding system given
below:
a) Both A and R are true and R is the correct explanation of A
b) Both A and R are true and R is not the correct explanation of A
c) A is true but R is false.
d) A is false but R is true.
Ans: a

5. An airport has 4 gates. If the weighted average gate


occupancy time is 30 minutes and gate utilisation factor
is 0.5, then the capacity of the gate will be
a) 1 aircraft per hour
b) 2 aircrafts per hour
c) 4 aircrafts per hour
d) 16 aircrafts per hour
Ans: c

6. The capacity of parallel runway pattern depends upon


a) weather conditions and navigational aids available
b) lateral spacing between two runways and weather conditions
c) lateral spacing between two runways and navigational aids
available
d) lateral spacing between two runways, weather conditions and

navigational aids available.
Ans: d

7. The engine failure case for determining the basic


runway length may require
a) only clearway
b) only stop way ,
c) either a clearway or a stopway
d) either a clearway or a stopway or both
Ans: d

8. The minimum width of clearway is


a) 50 m
b) 100 m
c) 150 m
d) 250 m
Ans: c

10. If the monthly mean of average daily temperature for


the hottest month of the year is 25° C and the monthly
mean of the maximum daily temperature of the same
month of the year is 46° C, the airport reference
temperature is
a) 32°C
b) 35.5°C
c) 48°C
d) 25°C
Ans: c

11. Consider the following statements regarding iCAO


recommendation for correction to basic runway length
1. The basic runway length should be increased at the rate of 7
percent per 300 m rise in elevation above the mean sea level.
2. The basic runway length after having been corrected for elevation
should be further increased at the rate of 1 percent for every 1°C rise
in airport reference temperature above the standard atmospheric
temperature at that elevation.
3. The runway length after having been corrected for elevation and
temperature should be further increased at the rate of 20% for every
1 percent of effective gradient.
Of these statements 
a) 1 and 2 are correct
b) 2 and 3 are correct
c) 1 and 3 are correct
d) 1,2 and 3 are correct
Ans: a

12. The total length of a runway is 1000 m. The elevation


at distance 0,200 m, 400 m, 600 m, 800 m and 1000 m
are 100.0 m, 99.2 m, 101.0 m, 101.8 m, 101.4 m and 101.0
m respectively. The effective gradient of runway will be.
a) 0.10%
b) 0.26%
c) 0.43 %
d) 0.65%
Ans: b

13. The length of runway under standard conditions is


2000 m. The elevation of airport site is 300 m. Its
reference temperature is 33.05°C. If the runway is to be
constructed with an effective gradient of 0.25 percent, the
corrected runway length will be
a) 2500 m
b) 2600 m
c) 2700 m
d) 2800 m
Ans: c

14. As per ICAO, the minimum basic runway length for A


and E type of airport will be
a) 1500 m and 600 m
b) 2100 m and 750 m
c) 1500 m and 750 m
d) 2100 m and 600 m
Ans: d

15. Zero fuel weight of an aircraft is:


a) equal to empty operating weight
b) equal to maximum landing weight
c) less than empty operating weight
d) equal to sum of empty operating weight and the maximum pay

load.
Ans: d

17. The cruising speed of the aircraft is 500 kmph. If there


is a head wind of 50 kmph, then the air speed and ground
speed of the aircraft respectively will be
a) 450 kmph and 500 kmph
b) 500 kmph and 450 kmph
c) 450 kmph and 450 kmph
d) 500 kmph and 500 kmph
Ans: a

19. As per ICAO, for airports serving big aircrafts, the


crosswind component should not exceed
a) 15 kmph
b) 25 kmph
c) 35 kmph
d) 45 kmph
Ans: c

20. Calm period is the percentage of time during which


wind intensity is less than
a) 4.8 kmph
b) 6.4 kmph
c) 8.0 kmph
d) 9.6 kmph
Ans: b

21. For determining the basic runway.length, the landing


case requires that aircraft should come to a stop within p
% of the landing distance. The value of p is
a) 40 %
b) 50%
c) 60%
d) 75%
Ans: c

22. According to ICAO, all markings on the runways are


a) Yellow
b) White
c) Black 
d) Red
Ans: b

23. Runway threshold is indicated by a series of parallel


lines starting from a distance of
a) 3 m from runway end
b) 6 m from runway end
c) 10 m from runway end
d) 15m from runway end
Ans: b

24. The width and interval of transverse centre line bars


along the extended centre line of runway, in approach
lighting system are
a) 3 m and 30 m
b) 4.2 m and 30 m
c) 4.2 m and 50 m
d) 3 m and 45 m
Ans: b

25. In Intrumental landing system, the middle markers


are located
a) along the extended centre line of runway end
b) about 1 km. ahead of the runway threshold
c) at the runway threshold
d) about 7 km. ahead of the runway threshold
Ans: b

Airport Engineering Interview Questions


26. The size of landing area for multiengined helicopters
operating under 1FR conditions is
a) 22.5 m x 22.5 m
b) 30 m x 30 m
c) 22.5 m x 30 m
d) 60 mx 120 m
Ans: d

27. The centre to centre spacing of heliport lighting along


the periphery of landing and take off area should be
a) 2.5 m
b) 5.0 m 
c) 7.5 m
d) 10.0 m
Ans: c

28. The slope of the obstruction clearance line from the


boundary of the heliport should be
a) 1:2
b) 1:5
c) 1:8
d) 1:40
Ans: c

29. Assertion A : Airport capacity during IFR conditions


is usually less than that during VFR conditions.
Reason R: During clear weather condition (VFR), the
aircrafts on final approach to runway can be spaced
closer during poor visibility conditions.
Select your answer based on the coding system given
below:
a) Both A and R are true and R is the correct explanation of A
b) Both A and R are true but R is not the correct explanation of A
c) A is true but R is false
d) A is false but R is true
Ans: a

30. Assertion A: The width of a taxiway is smaller than


the runway width. Reason R:The speed of the aircraft on
a taxiway is greater than that on runway. Select your
answer based on coding system given below
a) Both A and R are true and R is the correct explanation of A
b) Both A and R are true but R is not the correct explanation of A
c) A is true but R is false
d) A is false but R is true
Ans: c

31. For supersonic transport aircraft, the minimum


turning radius of taxiway is
a) 60 m
b) 120 m
c) 180 m

d) 240 m
Ans: c

33. As per UK design criteria, if LCN of aircraft is between


1.25 to 1.5 times the LCN of pavement, then the number
of movements allowed are
a) Zero
b) 300
c) 3000
d) Unrestricted
Ans: b

34. Which of the following is an example of failure in


flexible pavements ?
a) Alligator cracking
b) Mud pumping
c) Warping cracks
d) Shrinkage cracks
Ans: a

35. The main disadvantage of angle nose out parking


configuration of aircraft is that the
a) aircraft rear loading door is far away from terminal building.
b) hot blast is directed towards the terminal building
c) overall apron area required is more
d) all the above
Ans: b

36. Which of the following is used for servicing and


repairs of the aircraft ?
a) Apron
b) Hanger
c) Terminal building
d) holding apron
Ans: b

37. The slope of the transitional surface for A, B and C


type of runway shall be
a) 1:5
b) 1:7
c) 1:10 
d) 1:12
Ans: b

38. The length of clear zone for none instrument runway


of a small aircraft is
a) 150 m
b) 300 m
c) 600 m
d) 750 m
Ans: b

39. In approach areas of runways equipped with


instrumental landing facilities any object within 4.5 km
distance from runway end shall be considered as an
obstruction if its height is more than
a) 20 m
b) 30 m
c) 45 m
d) 51 m
Ans: b

40. Maximum gross take-off weight of an aircraft is


a) equal to the maximum structural landing weight
b) less than the maximum structural landing weight
c) more than the maximum structural landing weight
d) equal to the empty operating weight plus the payload
Ans: c

41. Consider the following statements: Wind rose


diagram is used for the purposes of
1. runway orientation
2. estimating the runway capacity
3. geometric design of holding apron Of these statements
a) 1 and 2 are correct
b) 2 and 3 are correct
c) 1 and 3 are correct
d) 1 alone is correct
Ans: d

42. Which of the following factors are taken into account


for estimating the runway length required for aircraft 
landing?
1. Normal maximum temperature
2. Airport elevation
3. Maximum landing weight
4. Effective runway gradient
Select the correct answer using the codes given below Codes:
a) 1,2,3 and 4
b) 1,3, and 4
c) 2 and 3
d) 1,2 and 4
Ans: d

43. In an airport, if 4 groups of 5 gates each located well-


separated are considered for traffic and the future to
present traffic ratio is 3, then the total requirement of
future gates will be
a) 32
b) 36
c) 44
d) 68
Ans: b

44. Castor angle is defined as the angle


a) formed by the longitudinal axis of the aircraft and the direction of
movement of the nose gear
b) between the direction of wind and the longitudinal axis of the
runway
c) between the true speed of the aircraft and the crosswind
component
d) between the horizontal and the fuselage axis
Ans: a

45. The runway length after correcting for elevation and


temperature is 2845 m. If the effective gradient on
runway is 0.5 percent then the revised runway length will
be
a) 2845 m
b) 2910 m
c) 3030 m
d) 3130 m
Ans: c 
AIRPORT ENGINEERING Questions and Answers pdf free
download ::

---- >> Below Are The Related Posts Of Above


Questions :::

------>>[MOST IMPORTANT]<<------

1. 250+ TOP MCQs on Airport Engineering and


Answers
2. 400+ TOP Docks & Harbour Engineering Objective
Questions and Answers
3. 250+ TOP MCQs on Instrument Landing Systems –
1 and Answers
4. 250+ TOP MCQs on Airport Survey and Answers
Online Quiz
5. 250+ TOP MCQs on Climb Gradient and Answers
6. 300+ TOP HIGHWAY Engineering MCQs and
Answers Quiz
7. 400+ TOP AIRPORT Engineering Interview
Questions and Answers
8. 250+ TOP MCQs on Types of Take-off and Landing
and Answers
9. 300+ TOP Railway Engineering Objective Type
Questions and Answers
10. 250+ TOP MCQs on Phases of Flight and Answers
11. 250+ TOP MCQs on ILS/MLS Coupled Landing
System and Automatic Landing – 1 and Answers
12. 300+ TOP Electrical Engineering Materials
Objective Type Questions and Answers
13. 100 TOP POWER PLANT Engineering Objective
Type Questions and Answers
14. 250+ TOP MCQs on Effect on the Take-off Distances
of Flight Variables and Answers
15. 250+ TOP MCQs on Aviation Communication
Systems – ILS-1 and Answers
16. 300+ TOP Automobile Engineering Objective
Questions for GATE Exams

17. 300+ TOP ECONOMICS of POWER GENERATION –
Electrical Engineering Objective Type Questions
and Answers
18. 250+ TOP MCQs on Landing Gear – Tire Sizing and
Answers
19. 250+ TOP MCQs on Geometrics of Hill Roads and
Answers
20. 250+ TOP MCQs on Fixed-Wing Aircraft – Mission
Profile and Answers

LEAVE A REPLY

Your email address will not be published. Required fields are marked *

Comment *

Name *

Email *

Website

Post Comment


Engineering 2022 , FAQs Interview Questions , Theme by Engineering|| Privacy Policy|| Terms and
Conditions|| ABOUT US|| Contact US||
Engineering interview questions,Mcqs,Objective Questions,Class Lecture Notes,Seminor topics,Lab
Viva Pdf PPT Doc Book free download. Most Asked Technical Basic CIVIL | Mechanical | CSE | EEE |
ECE | IT | Chemical | Medical MBBS Jobs Online Quiz Tests for Freshers Experienced .

You might also like