Single Compression Gland featuring a Freely Rotating

PRODUCT TYPE A*RCC Flexible Metallic Conduit Connector

Ex d : Ex e : Ex nR : Ex ta : IP66 : IP68

PART NUMBERS:

A 1 R CC B F

2 S

3 A

PRODUCT DESCRIPTION
“A*RCC” type glands are certified Flameproof Ex d, Increased Safety Ex e, Restricted Breathing Ex nR and
Dust Protected Ex ta. They are suitable for use in Zone 1 and 2 for Gas Groups IIA, IIB and IIC and additionally
for use in Zones 20, 21 and 22 for Dust Groups IIIA, IIIB and IIIC. Commonly referred to as “stuffing glands”,
they provide a controlled pull resistant environmental displacement seal on the cable outer sheath, minimising
damage to cables that exhibit “cold flow” characteristics. The gland maintains IP66 & IP68 to 50 metres. It is
REFERENCE NUMBER: 2.3.0
supplied with an IP O-ring seal as standard on metric entry threads. The gland features a freely rotating
flexible conduit connection.
EXAMPLE PART NUMBERING:
A2RCCBF/NP/20-1/M20

A Gland featuring controlled displacement sealing COMPLIANCE STANDARDS:

EN 60079-0, EN 60079-1, EN 60079-7, EN 60079-15, EN 60079-31
2 Neoprene Seal (2) - Silicone Seal (3) - Neoprene/Lead (1) - Silicone/Lead (4) IEC 60079-0, IEC 60079-1, IEC 60079-7, IEC 60079-31 & IEC 60529
R Rotating Conduit Design

CC Metallic Flexible Conduit Connector

II 1D 2G Ex d IIC Gb / Ex e IIC Gb / Ex ta IIIC Da

CERTIFICATION:
ATEX
B Aluminium (A) / Brass (B) / Stainless Steel (S) II 3 G Ex nR IIC Gc
IECEx Ex d IIC Gb / Ex e IIC Gb / Ex ta IIIC Da
F Multiple Certification EAC Exd IICU / Exe IIU / ExnR IIU
INMETRO - Brazil Ex d IIC Gb / Ex e IIC Gb / Ex ta IIIC Da / Ex nR IIC Gc
NP Nickel Plated SAC - China Ex d IIC / Ex e IIC
UKRAINE Ex d IIC X / Ex e II X
20-1 Gland & Connector Size
CCoE - India Petroleum Rules 2002 (PESO)
M20 M20 x 1.5mm Male Entry Thread ABS Specified ABS Rules
LLOYD’S Enclosure Systems (Part 1B)
RMRS Part XI of RS Rules for the classification & construction of sea-going ships (ed. 2014)
OPTIONAL
ACCESSORIES:

LOCKNUT Brass (ACBLN) / Stainless Steel (ACSLN) / Aluminium (ACALN)

SIRA 01ATEX1272X & SIRA 09ATEX1221X
CERTIFICATION No:

EARTH TAG Brass (ACBET) / Stainless Steel (ACSET) / Aluminium (ACAET) ATEX
IECEx IECEx SIR 07.0096X
IP WASHERS Nylon (ACNSW) / Fibre (ACFSW) / PTFE (ACPSW)
EAC RU C-GB.ГБ06.В.00098
SERRATED WASHERS Stainless Steel (ACSSW) INMETRO - Brazil NCC 13.2012 X
SAC - China NEPSI GYJ16.1399X
IP RATING: IP66 & IP68 (50 metres - 7 Days) UKRAINE UA.TR.047.C.0408-13 & 2937
CCoE - India PESO P365300/2 & P365300/5
OPERATING TEMP: Neoprene Seals -35°C to +90°C / Silicone Seals -60°C to +180°C
ABS 14-LD463991-1-PDA
MATERIALS: Aluminium, Brass or Stainless Steel LLOYD’S 10/00056(E1)
PLATING: Electroless Nickel RMRS 14.02755.315
CABLE GLAND SELECTION TABLE
(ALL DIMENSIONS IN mm)

2.3.0
Metric Cable Acceptance Details
Entry Thread Size Typical Conduit Diameter Nominal Dimensions/Weight (Metric Versions)
Gland & Thread Outer Sheath [D]
Connector Protrusion
Size Length
Length [L] Across Weight
Metric NPT [B] Min Max I/D Max O/D Across Corners
Flats [A] Kgs
12-1 M12 x 1.5 3/8” 16 0.9 5.4 6.8 10.3 35 19.0 20.9 0.051
12-1 M16 x 1.5 3/8” or 1/2” 16 0.9 5.4 6.8 10.3 34 25.4 28.0 0.059
12-2 M12 x 1.5 3/8” 16 0.9 6.0 9.1 14.3 35 19.0 20.9 0.083
12-2 M16 x 1.5 3/8” or 1/2” 16 0.9 6.0 9.1 14.3 34 25.4 28.0 0.092
12-3 M16 x 1.5 3/8” or 1/2” 16 0.9 6.0 7.7 13.0 34 25.4 28.0 0.107
16-1 M16 x 1.5 3/8” or 1/2” 16 4.0 8.4 10.2 14.1 39 25.4 28.0 0.130
16-1 M20 x 1.5 3/8” or 1/2” 16 4.0 8.4 10.2 14.1 45 25.4 28.0 0.130
16-2 M16 x 1.5 3/8” or 1/2” 16 4.0 8.4 10.9 15.8 39 25.4 28.0 0.130
16-2 M20 x 1.5 3/8” or 1/2” 16 4.0 8.4 10.9 15.8 45 25.4 28.0 0.130
16-3 M16 x 1.5 3/8” or 1/2” 16 4.0 8.4 13.0 17.1 39 25.4 28.0 0.130
16-3 M20 x 1.5 3/8” or 1/2” 16 4.0 8.4 13.0 17.1 45 25.4 28.0 0.130
20S-1 M20 x 1.5 3/8” or 1/2” 16 7.2 11.0 13.0 17.1 45 25.4 28.0 0.133
20S-2 M20 x 1.5 3/8” or 1/2” 16 7.2 11.7 15.0 19.3 45 25.4 28.0 0.133
20S-3 M20 x 1.5 3/8” or 1/2” 16 7.2 11.7 13.6 20.7 45 25.4 28.0 0.133
20-1 M20 x 1.5 1/2” or 3/4” 16 9.4 14.0 16.9 22.3 45 30.0 33.0 0.162
20-2 M20 x 1.5 1/2” or 3/4” 16 9.4 14.0 18.0 23.8 45 30.0 33.0 0.162
20-3 M20 x 1.5 1/2” or 3/4” 16 9.4 14.0 18.7 24.8 45 30.0 33.0 0.174
20-4 M20 x 1.5 1/2” or 3/4” 16 9.4 14.0 20.7 28.3 45 30.0 33.0 0.195
20-5 M20 x 1.5 1/2” or 3/4” 16 9.4 13.0 13.9 19.3 45 30.0 33.0 0.210
25-1 M25 x 1.5 3/4” or 1” 16 13.5 20.0 23.7 31.3 46 37.6 41.4 0.256
25-2 M25 x 1.5 3/4” or 1” 16 13.5 19.0 21.1 26.8 46 37.6 41.4 0.231
25-3 M25 x 1.5 3/4” or 1” 16 13.5 19.0 24.3 31.3 46 37.6 41.4 0.234
25-4 M25 x 1.5 3/4” or 1” 16 13.5 20.0 22.3 28.3 46 37.6 41.4 0.234
32-1 M32 x 1.5 1” or 1 ¼” 16 19.5 26.0 28.1 33.3 47 46.0 50.6 0.322
32-2 M32 x 1.5 1” or 1 ¼” 16 19.5 26.3 30.4 38.2 47 46.0 50.6 0.347
32-3 M32 x 1.5 1” or 1 ¼” 16 19.5 26.3 30.4 40.2 47 46.0 50.6 0.369
40-1 M40 x 1.5 1 ¼” or 1 ½” 16 23.0 32.2 36.4 46.2 50 55.0 60.5 0.518
40-2 M40 x 1.5 1 ¼” or 1 ½” 16 23.0 32.2 36.4 44.2 50 55.0 60.5 0.497
40-3 M40 x 1.5 1 ¼” or 1 ½” 16 23.0 32.2 37.7 44.7 50 55.0 60.5 0.484
50S-1 M50 x 1.5 1 ½” or 2” 16 28.1 38.2 48.4 55.8 50 65.0 71.5 0.630
50-1 M50 x 1.5 2” 16 33.1 44.1 48.4 55.8 50 65.0 71.5 0.575
63S-1 M63 x 1.5 2” or 2 ½” 19 39.2 50.1 57.5 64.8 50 80.0 88.0 0.990
63-1 M63 x 1.5 2 ½” 19 46.7 53.6 57.5 64.8 50 80.0 88.0 0.900

• Gland size does not necessarily equate to the entry thread size. Peppers Cable Glands Limited will not be held responsible for clients’ installations
NOTES

• The IP O-ring seal is only available on metric entry threads. IP washers can be where this has not been taken into account.
supplied for tapered entry threads. • When selecting IP Washer material for gland kits, please be aware of the
• Dimensions (A) & (B) may differ for glands with non metric entry threads. accessories temperature range to ensure they are suitable for the
Please refer to our “Thread Reference Tables” for specific dimensions. intended installation.
• Assembly instructions must be read prior to installation and adhered to in full. • Where approval in addition to ATEX and IECEx is required, this must be clearly
• Peppers supplies cable glands with parallel entry threads that conform to the requested at time of enquiry / order.
flameproof threaded joint requirements of IEC/EN 60079-1 and other equivalent • It is the installer’s responsibility to ensure that the flexible conduit is
standards. They usually incorporate a thread run out according to the available secured correctly.
machining techniques and will not have a full form thread for the entire length. • If fit testing is required for specific conduit please contact Peppers.

Peppers Cable Glands Ltd: www.cableglands.com | Email: [email protected] | Tel: +44 (0) 1276 64232 6