Schedule Overview

* dates may vary or be canceled due to COVID 19

Scan this code to visit our

Media Center: in-depth,
captivating, entertaining.

ARBURG, Inc.
644 West Street
Rocky Hill, CT 06067
CUSTOMER

680044_EN_US_102021 · Subject to lterations

Printed in Germany
Tel.: +1 (860) 667 6500
Fax: +1 (860) 667 6522
[email protected]
TRAINING
ARBURG, Inc.
ARBURG Technology Center - Midwest
ARBURG, Inc.
ARBURG Technology Center - California USA
2585 Millennium Drive, Elgin, IL 60124 51 Doppler, Irvine, CA 92618
Tel.: +1 (847) 488 1313 Tel.: +1 (949) 453 1313
Fax: +1 (847) 488 9011 Fax: +1 (949) 753 5066
[email protected] [email protected] 2022

© 2021 ARBURG GmbH + Co KG | All data and technical information have been compiled with great
care. However we accept no responsibility for correctness. Individual illustrations and information may
deviate from the actual delivery condition of the machine. The relevant valid operating instructions
are applicable for the installation and operation of the machine.
 Introducción

Dear valued Customer,

The trademark of the ARBURG injection molding machines is

their versatility and flexibility. It is important therefore that you,
our customer, should be able to obtain a full understanding and
appreciation of its full capability.

For this particular reason ARBURG has put together this booklet to offer you
and your technicians the possibility of participating in training courses which will
enable you to acquire all the skills required to work with the ARBURG range of
injection molding machines.

Contained within this booklet is our training schedule for 2022 which includes the
current ARBURG training program subdivided into different courses according to
your specific requirements. Training classes are
offered at the ARBURG US-Headquarters in Rocky Hill, CT as well as at the two
ARBURG Technology Centers in Irvine, CA and Elgin, IL at the Southern Union State
Community College in Opelika, AL and at CEGEP in Thetford Mines, Quebec.

Once you have selected the course that is most suitable for you please contact our
training coordinator Alyssa Dugee at (860) 667-6500. She will assist you with the
respective arrangements.

Yours faithfully

ARBURG, Inc.
Juergen Giesow

3
 General information

Course times
8:30 AM - 4:30 PM

Costs
2 days $600.00
PT (Plastics Technology Course) Alyssa Dugee
P (Machine Intensive Course)

2 days free Registration / confirmation

with ARBURGXworld registration Registration should take place no later
M Virtual (Virtual Selogica Introduction) than 2 weeks before the course com-
mencement date.
3 days $600.00
R (MULTILIFT Robot System Course) We reserve the right to cancel the
courses in case the min. number of
3 days $600.00 participants is not reached.
M-S (Machine Setting Course)
For further information please call
4 days $1000.00 Alyssa Dugee at (860) 667-6500.
SC (Service Course)
LSR (Processing Course) If your machine is not listed, there
are training courses avai­lable that
Included: can be held at your facility. Please
Extensive course documents contact ARBURG, Inc. for additional
and lunches. information.

Room reservations
If you require any assistance
making h­­otel arrangements,
we would be glad to help.
Course enquiries are also
possible via our website.

4
 Our Trainers

Simon Blum Stefan Scheibner

Tobias Pyka Marc Maulbetsch

Brian Murray Timo Koenig

Marcus Hardt Daniel Mueller

Daniel Heinzelmann

5
 Training facilities

ARBURG, Inc., Rocky Hill, CT

ARBURG Technology Center – California, Irvine, CA

ARBURG Technology Center – Midwest, Elgin, IL

6
 Training facilities / Addresses

US-Headquarters
ARBURG, Inc.
644 West Street
Rocky Hill, CT 06067
Tel.: (860) 667-6500
Fax: (860) 667-6522
www.arburg.us
E-Mail: [email protected]

ATC – California
ARBURG, Inc.
51 Doppler
Irvine, CA 92618
Tel.: (949) 453-1313
Fax: (949) 753-5066

ATC – Midwest
ARBURG, Inc.
2585 Millennium Drive
Elgin, IL 60124
Tel.: (847) 488-1313
Fax: (847) 488-9011

Southern Union State

Community College
1701 Lafayette Pkwy
Opelika, AL 36801

CEGEP DE THETFORD
671, Boulevard Frontenac Ouest
Thetford Mines, QC G6G 1N1

7
8
 Overview

Machine
M Machine Setting Course
Basic course for machine operation and
programming theory and practice

Virtual M Virtual SELOGICA Introduction course

Virtual SELOGICA Introduction, programming
in theory and practice without machine
Service
SC-H Service Course
Hydraulic machines maintenance

SC-E Service Course

Electric machines maintenance

P Intensive hands on Machine Setting Course

Automation
R MULTILIFT SELECT Robot System Course
ARBURG Robot System MULTILIFT H
ARBURG Robot System MULTILIFT V
ARBURG Robot System MULTILIFT SELECT
Technology
PT Plastics Technology Course
Course on injection molding materials, processing,
part and mold design, troubleshooting and process
optimization

LSR LSR Processing Course

Digitalization
aXw aXw Info Seminar - virtual

9
M Machine setting course

Course description

Course objective: Operation and processing with

ARBURG injection molding machines
Target group: Machine operators, set-up personnel and process engineers
Precondition: Basic knowledge of injection molding
Course duration: 3 days
Cost of course: $600.00
Documents: Course manual with accompanying texts

Course content

• Discussion of typical machine features

• Introduction and exercises involving on-screen controls
• Mold installation and setting of clamping unit
• Setting of injection unit, regarding different plastic materials and
injection molded parts
• Optimization of machine setting
• Data collection and quality control
• Preventive maintenance

Topics Machine
M-S SELOGICA direct Setting ALLROUNDER A/E
Course Setting Course ALLROUNDER H
ALLROUNDER S
ALLROUNDER T
ALLROUNDER V
ALLROUNDER GOLDEN EDITION

10
 Machine Setting Course M - Virtual

Course description

Course Objective: Functions and utilization of Selogica Controller on Arburg

Injection Molding Machines
Target group: Machine operators, set-up personnel and process engineers
Precondition: Basic knowledge of injection molding
Registered user of arburgXworld and signed up for Premium or Premium Plus
Course Duration: 2 days
Cost of course: free
Documents: Course manual with accompanying texts

Course content

• Discussion of typical machine features

• Introduction and exercises involving on-screen controls
• Setting of clamping unit
• Setting of injection unit, regarding different plastic materials and
injection molded parts
• Optimization of machine setting
• Data collection and quality control
• Preventive maintenance

Topics Machine
M-S SELOGICA direct Setting ALLROUNDER A/E
Course Setting Course ALLROUNDER H
ALLROUNDER S
ALLROUNDER T
ALLROUNDER V
ALLROUNDER GOLDEN EDITION

11
SC-H Service course hydraulic machines

Course description

Course objective: Working with hydraulic and electric circuit diagrams,

Knowledge of the hydraulic and electric machine sequence.
Preventive maintenance. Effective trouble shooting. Machine calibration.
Target group: Service personnel, maintenance engineers, electricians,
electronic engineers.
Precondition: Basic knowledge of hydraulics, mechanics and electrics.
Course duration: 4 days
Course fee: $1000.00
Documents: Course manual with accompanying schematics.

Course content

• Introduction (overview and machine preparation)

• Machine’s functional sequence with process diagram
• Important electrical, mechanical and hydraulic components
• Electrical and hydraulic circuit diagrams and machine components
• Possible malfunctions and correction
• Calibration
• Taking measurements from the machine (electrical and hydraulic)

Topics Machine
SC-H SELOGICA Service Course ALLROUNDER S
ALLROUNDER T
ALLROUNDER U
ALLROUNDER V
ALLROUNDER GOLDEN EDITION

12
 Service course electric machines SC-E

Course description

Course objective: Working with hydraulic and electric circuit diagrams,

Knowledge of the hydraulic and electric machine sequence. Preventive
maintenance. Effective trouble shooting. Machine calibration.
Target group: Service personnel, maintenance engineers, electricians,
electronic engineers.
Precondition: Basic knowledge of hydraulics, mechanics and electrics.
Course duration: 4 days
Course fee: $1000.00
Documents: Course manual with accompanying schematics.

Course content

• Introduction (overview and machine preparation)

• Machine’s functional sequence with process diagram
• Important electrical, mechanical and hydraulic components
• Electrical and hydraulic circuit diagrams and machine components
• Possible malfunctions and correction
• Calibration
• Taking measurements from the machine (electrical and hydraulic)

Topics Machine
SC-E SELOGICA Service Course ALLROUNDER A/E
ALLROUNDER H

13
 Intensive Hands on Machine
P Setting Course

Course description

Course objective: Gaining in depth knowledge on setting up a SELOGICA

controlled molding Machine
Target group: Senior Process Technicians, Process Engineers, Molding manager
and Plant Manager
Precondition: Participation of an ARBURG M class or several years of experience
in setting up SELOGICA controlled molding machines.
Course duration: 2 days
Course fee: $600.00
Documents: Course manual with accompanying text

Course content

• Finding Students will work to find the best process parameters for
the product
• Instructor will only guide and supervise
• Focus on the use of the graphic and monitoring functions as well
as SPC functions
• Use of different Plastic Materials

Topics Control Machine

P SELOGICA direct ALLROUNDER S
Intensive Course ALLROUNDER T
ALLROUNDER U
ALLROUNDER V
ALLROUNDER GOLDEN EDITION

14
 MULTILIFT Robot System Course R

Course description

Course objective: Independent working with the MULTILIFT Robot System

Target Group: Set-up personnel, machine operators, production managers,
mold manufacturers and mold designers
Preqiusites: Participation in a SELOGICA machine setting course (M class)
Course duration: 3 days
Course fee: $600.00
Documents: Course manual with accompanying texts

Course content

• Introduction, operation and programming of the MULTILIFT Robot System

• Various applications of programming with gripper or vacuum
take out sequence
• Good shot, bad shot, sample shot separation using the MULTILIFT
• Use of subroutines
• Preventative maintenance

Topics Robot System

R MULTILIFT H with SELOGICA control
MULTILIFT V with SELOGICA control
MULTILIFT SELECT with SELOGICA control

15
PT Plastics Technology Course

Course description

Course objective: Introduction to injection molding materials and processing

Target group: Machine operators, process engineers, production managers,
controllers, sales, designers, planners
Precondition: Basic knowledge of injection molding and
injection molding materials
Course duration: 2 days
Course fee: $600.00
Documents: Course manual with accompanying texts

Course content

• Injection molding materials

• Structure and typical properties of injection molding materials
• Overview of common materials
• Amorphous and semi-crystalline injection molded materials
• Injection molding process
• Sequence of injection molding machine
• Influencing variables in injection molding
• Process parameters and their influence on injection molded parts
• Process optimization

Topics
PT Injection molding materials
Injection molding process

16
 Course on special processes
LSR processing SV LSR

Course description

Course objective: Developing knowledge of material properties and the injection

molding of liquid silicones (LSR)
Target group: Insatallation technicians, machine operators, mold designers,
process engineers
Requirements: Basic knowledge of injection molding and participation in a
machine adjustment course (M)
Course duration: 4 days
Course fee: $1000.00
Documents: Course folder and CD
"course will be instructed by a Toolmaker, Pump, Material and Machine
specialist"

Course content

• Introduction to the structure/properties of plastics and LSR materials

• LSR-specific equipment of ALLROUNDERs
• LSR-specific programming, setting and monitoring of an injection
molding machine
• Basics of LSR injection mould configuration
• Process optimisation
• Review of Material Chemistry (done by material manufacturer)
• Review of Silicone Pumping System (done by a pump supplier)
• Review of different Silicone Molds (done by a Silicone Mold Maker)

Topics
PT Injection molding materials
Injection molding process

17
aXw aXw info Seminar - virtual

Course description

Course Objective: Working with arburgXworld to review the content and

available features of the system. Learning how to work with the system and
understanding what all is possible with arburgXworld.
Target group: Companies that are set up as an arburgXworld user and
personnel that will have benefits working with the program.
Precondition: Being set up as an arburgXworld user
Course Duration: 1 day
Cost of course: free

Course content

• Access information from your machine fleet

• Find and order spare parts online
• Analyze machine faults yourself
• Use of Virtual Twin of your machine
• Sizing an injection molding machine

18
19
 How to find us

Hartford

91

91

41.651085,
-72.664086
Exit 23 Exit 23
At the ramp At the ramp
turn left turn right
reet
West St
411

N
W E
S
500 m
2000 ft
New Haven

ARBURG,
Rocky Hill,Inc.
CT
644 West Street | Rocky Hill, CT 06067

Santa Ana Los Angeles

Orange County Airport
John Wayne Airport /

N
Santa Ana

W E
S
405
200 m
Rese 500 ft
arc
hD
r
Irvin

5
eC
ent
er D
r

Bake Pkwy
y
Pkw
ke
Ba
ller
Mu
Res

33.636343,
ea

San Diego
Do

rch
pp

-117.737814
Dr
le
r

ARBURG,
Irvine, CA Inc. | ATC California
51 Doppler | Irvine, CA 92618

N
d

90
Hollow R

W E
S
500 m
epy

2000 ft
Rd
ky
Sle

cos
Bon

Co 34 90
42.063532,
Chicago

Hw
y2
-88.349225 1
N McLean Blvd

Big
Tim
be
rR
ll Rd

d
nda
N Ra

Hig
hl a nd Ave Co Hwy
47 Royal Blvd

ARBURG, Inc. | ATC Midwest

Elgin, IL
2585 Millennium Drive | Elgin, IL 60124

20
 Registration form Fax

To: ARBURG, Inc. – Attn. Alyssa Dugee

Fax: (860) 667-6522 - [email protected]
From:

Company:

Mr. /Mrs.

Address:

E-Mail:

Phone: Fax:

Registration for a Training Class at:

ARBURG, Inc. - Rocky Hill, CT
ARBURG, Inc. - Irvine, CA
ARBURG, Inc. - Elgin, IL
Southern Union State Community College, Opelika, AL
CEGEP DE THETFORD, Thedford Mines, QC

Type (M, SC, P, PT, R, LSR) Date of Course Participant

We have taken into account that liability claims against ARBURG are excluded
in the event that a course participant should suffer injury on ARBURG's training
premises.

Date, Signature P.O. Number

 Rocky Hill, CT overview Course

M-S
January 17 - 19
February 21 - 23
March 28 - 30
May 04 - 06
June 13 - 15
September 14 - 16
October 05 - 07
November 07 - 09
December 19 - 21

M - virtual
January 19 - 20
February 23 - 24
March 23 - 24
April 20 - 21
May 18 - 19
June 22 - 23
July 20 - 21
August 17 - 18
September 21 - 22
October 19 - 20
November 16 - 17
December 21 - 22

SC-H
February 08 - 11
April 26 - 29
September 20 - 23
November 15 - 18

SC-E
March 15 - 18
May 24 - 27
October 25 - 28
December 13 - 16

P
January 31 - February 01
March 31 - April 01
June 16 - 17
October 10 - 11
November 10 - 11

PT
May 02 - 03
September 12 - 13
 Course Rocky Hill, CT overview

LSR
May 10 - 13

R
February 02 - 04
April 20 - 22
June 01 - 03
October 12 - 14
December 05 - 07

aXw
February 15
May 17
September 20
November 15

24
 Course Elgin, IL overview Irvine, CA overview Course

M-S M-S
January 24 - 26 February 16 - 18
March 02 - 04 March 21 - 23
April 11 - 13 April 20 - 22
May 16 - 18 May 25 - 27
June 08 - 10 June 13 - 15
September 21 - 23 September 21 - 23
October 19 - 21 October 17 - 19
November 07 - 09 November 14 - 16
December 14 - 16 December 07 - 09

SC-H SC-H
April 05 - 08 March 08 - 11
December 06 - 09 November 01 - 04

SC-E SC-E
February 15 - 18 May 17 - 20
October 11 - 14 September 27 - 30

P P
January 27 - 28 February 21 - 22
March 07 - 08 April 25 - 26
May 19 - 20 June 16 - 17
September 26 - 27 October 20 - 21
November 10 - 11 December 12 - 13

PT PT
February 28 - March 01 February 14 - 15
October 17 - 18 May 23 - 24
September 19 - 20
LSR
March 22 - 25 LSR
October 11 - 14
R
March 09 - 11 R
May 23 - 25 February 23 - 25
September 28 - 30 April 27 - 29
December 19 - 21 October 24 - 26
December 14 - 16
 Course Elgin, IL overview Irvine, CA overview Course

M-S M-S
January 24 - 26 February 16 - 18
March 02 - 04 March 21 - 23
April 11 - 13 April 20 - 22
May 16 - 18 May 25 - 27
June 08 - 10 June 13 - 15
September 21 - 23 September 21 - 23
October 19 - 21 October 17 - 19
November 07 - 09 November 14 - 16
December 14 - 16 December 07 - 09

SC-H SC-H
April 05 - 08 March 08 - 11
December 06 - 09 November 01 - 04

SC-E SC-E
February 15 - 18 May 17 - 20
October 11 - 14 September 27 - 30

P P
January 27 - 28 February 21 - 22
March 07 - 08 April 25 - 26
May 19 - 20 June 16 - 17
September 26 - 27 October 20 - 21
November 10 - 11 December 12 - 13

PT PT
February 28 - March 01 February 14 - 15
October 17 - 18 May 23 - 24
September 19 - 20
LSR
March 22 - 25 LSR
October 11 - 14
R
March 09 - 11 R
May 23 - 25 February 23 - 25
September 28 - 30 April 27 - 29
December 19 - 21 October 24 - 26
December 14 - 16
25
Schedule Overview
* dates may vary or be canceled due to COVID 19

Scan this code to visit our

Media Center: in-depth,
captivating, entertaining.

ARBURG, Inc.
644 West Street
Rocky Hill, CT 06067
CUSTOMER

680044_EN_US_102021 · Subject to lterations

Printed in Germany
Tel.: +1 (860) 667 6500
Fax: +1 (860) 667 6522
[email protected]
TRAINING
ARBURG, Inc.
ARBURG Technology Center - Midwest
ARBURG, Inc.
ARBURG Technology Center - California USA
2585 Millennium Drive, Elgin, IL 60124 51 Doppler, Irvine, CA 92618
Tel.: +1 (847) 488 1313 Tel.: +1 (949) 453 1313
Fax: +1 (847) 488 9011 Fax: +1 (949) 753 5066
[email protected] [email protected] 2022

© 2021 ARBURG GmbH + Co KG | All data and technical information have been compiled with great
care. However we accept no responsibility for correctness. Individual illustrations and information may
deviate from the actual delivery condition of the machine. The relevant valid operating instructions
are applicable for the installation and operation of the machine.