Two-Way Charging Hub

User Guide
使用说明
使用說明
ユーザーガイド
사용자 가이드
Bedienungsanleitung
Guía del usuario
Guide de l'utilisateur
Guida dell'utente
Gebruiksaanwijzing
Manual do utilizador
Guia do usuário
Руководство пользователя

v1.0 2020.11
Contents

EN User Guide 3

CHS 使用说明 6

CHT 使用說明 8

JP ユーザーガイド 10

KR 사용자 가이드 14

DE Bedienungsanleitung 16

ES Guía del usuario 20

FR Guide de l'utilisateur 24

IT Guida dell'utente 27

NL Gebruiksaanwijzing 31

PT Manual do utilizador 34

PT-BR Guia do usuário 38

RU Руководство пользователя 41

Compliance Information 46

1
 Click
咔 Clic
A. 咔 Clic
カチッ Klik
딸깍 Clique
Klick Clique
Clic Щелчок

B.

Click
咔 Clic
C. 咔 Clic
カチッ Klik
딸깍 Clique
Klick Clique
Clic Щелчок

2
 EN

Disclaimer
Please read this entire document and all safe and lawful practices DJITM provided
carefully before use. Failure to read and follow instructions and warnings may result
in serious injury to yourself or others, damage to your DJI product, or damage to
other objects in the vicinity. By using this product, you hereby signify that you have
read this disclaimer and warning carefully and that you understand and agree to
abide by the terms and conditions herein. You agree that you are solely responsible
for your own conduct while using this product, and for any consequences thereof.
DJI accepts no liability for damage, injury or any legal responsibility incurred directly
or indirectly from the use of this product. This document and all other collateral
documents are subject to change at the sole discretion of DJI.

Warning
1. When using the DJI Mini 2 Two-Way Charging Hub (hereinafter referred to
as “charging hub”) to charge the DJI Mini 2 Intelligent Flight Batteries, it is
recommended to use a DJI 18W USB Charger or an FCC/CE-certified USB
charger that supports Quick Charge or USB Power Delivery protocol.
2. Place the charging hub on a flat and stable surface when in use. Ensure the
device is properly insulated to prevent fire hazards.
3. DO NOT attempt to touch the metal terminals on the charging hub.
4. Clean the metal terminals with a clean, dry cloth if there is any noticeable buildup.

Overview

1. Battery Ports
1 2. Status LEDs
2 3. Function Button
3
4 4. Power Port (USB-C)
5 5. USB Port

Introduction
The DJI Mini 2 Two-Way Charging Hub is designed both to charge Intelligent
Flight Batteries connected to the battery ports and external devices such as a DJI
Mini 2 Remote Controller, smartphones, or tablets connected to the USB port. The
following scenarios explain more about how the charging hub works.
1. When a charger is connected to the charging hub with the Intelligent Flight
Batteries inserted and external devices disconnected from the USB port, the
charging hub will only charge the Intelligent Flight Batteries.
2. When connecting a charger to the charging hub, with the Intelligent Flight Batteries
inserted and external devices connected to the USB port, the Intelligent Flight
Batteries will be prioritized by default. The external devices will be charged when
all the inserted batteries are fully charged. Press and hold the function button on
the charging hub to switch to charging the external devices first.

3
3. When the Intelligent Flight Batteries are inserted into the charging hub, with
external devices connected to the USB port and the charger disconnected
from the charging hub, the batteries can be used as a power bank to charge
the connected external devices.

Usage
Charging Intelligent Flight Batteries
1. As shown in Figure A, insert the battery into the battery port until there is a
click. Connect the charging hub to a power outlet (100-240 V, 50/60 Hz) using
a USB-C cable and a DJI 18W USB Charger.
2. The Intelligent Flight Battery with the highest power level will be charged first
and the rest will be charged in sequence according to their power levels.
The status LEDs will glow solid white after the corresponding battery is fully
charged. Remove the battery from the charging hub as shown in Figure B.

Using Intelligent Flight Batteries as Power Banks

As shown in Figure C, insert the Intelligent Flight Battery into the charging hub
without connecting it to a charger, then connect any external device to the USB
port in the charging hub. The Intelligent Flight Battery with the lowest power level
will be discharged first and the rest in sequence according to their power levels.
The status LEDs will display the power level of the battery that supplies power
when the external devices are being charged.

Press the function button on the charging hub once to activate charging
if charging does not begin automatically.

Switching Devices to Charge

When inserting the Intelligent Flight Batteries into the charging hub, if both a
charger and external devices are connected to the charging hub, it will prioritize
the Intelligent Flight Batteries and charge them first. After all the Intelligent Flight
Batteries have been fully charged, the external devices will be charged.
Press and hold the function button on the charging hub for two seconds to
prioritize charging external devices. Charge for Intelligent Flight Batteries will be
continued after the external devices are fully charged or they have been charged
for 4 hours. When charging external devices, press and hold the function button
for two seconds to switch back to charging Intelligent Flight Batteries.

• When the input of the charging hub is lower than 5V/2A, there is a chance
that the USB port will be unable to charge the external devices.
• When charging an external device such as a smartphone or tablet, if it
has high standby power consumption, the charging hub may not detect
whether the device is fully charged. In this case, charging will not
switch to Intelligent Flight Batteries automatically until after charging the
external devices for 4 hours. Users can manually switch the charging
priority by pressing and holding the function button.

4
Checking Battery Levels
The status LEDs will display battery levels for three seconds after the batteries are
inserted into the charging hub. Users can also check the battery levels by pressing
the function button once. Refer to the section below for the battery level description.

Status LEDs Descriptions

Charging Status
Each battery port has its corresponding status LED array.

The battery in the corresponding battery

Status LEDs in an array blink
port is being charged using a Quick
successively (quickly)
Charge charger.
Status LEDs in an array blink The battery in the corresponding battery port
successively (slowly) is being charged using a normal charger.
The battery in the corresponding battery
Status LEDs in an array blink port is being charged. In this case,
successively (slowly for approx. 30 s, charging will be extremely slow. It is
then blink very slowly with a gap of 2 s) recommended to use another USB-C
cable for charging.
The battery in the corresponding battery
Status LEDs in an array are solid
port is fully charged.
All status LEDs blink in sequence No battery is inserted.

Battery Level
Each battery port has its corresponding status LED array, from LED1 to LED4 (from
left to right). The battery level description is the same as the one for the battery level
LEDs on the aircraft. Refer to the DJI Mini 2 User Manual for more information.

Abnormal Status
The abnormal status display of each battery status LED array is the same as the
one for the battery level LEDs on the aircraft when inserting the battery into the
aircraft. Refer to the DJI Mini 2 User Manual for more information.

Specifications
Model CHX161
Compatible DJI Charger DJI 18W USB Charger
Compatible DJI Battery BWX161-2250-7.7 Intelligent Flight Battery
Operating Temperature 5° to 40° C (41° to 104° F)
Input 5V 3A/9V 3 A / 12 V 3A
USB Port Output Max: 5 V 2A
Weight Approx. 72 g
For three BWX161-2250-7.7 batteries:
Charging Time*
Approx. 4 hours

* Charging time was tested using a DJI 18W USB Charger in a lab environment and
should be used as reference only.
5
Compliance Information
FCC Compliance Statement: Supplier's Declaration of Conformity
Product Name: DJI Mini 2 Two-Way Charging Hub
Model Number: CHX161
Responsible Party: DJI Technology, Inc.
Responsible Party Address: 201 S. Victory Blvd., Burbank, CA 91502
Website: www.dji.com

We, DJI Technology, Inc., being the responsible party, declares that the above
mentioned model was tested to demonstrate complying with all applicable FCC
rules and regulations.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.

ISED Compliance
CAN ICES-3 (B)/NMB-3(B)

EU Compliance Statement: SZ DJI TECHNOLOGY CO., LTD. hereby declares

that this device is in compliance with the essential requirements and other relevant
provisions of th014e Directive 2014/30/EU.
A copy of the EU Declaration of Conformity is available online at www.dji.com/euro-
compliance
EU contact address: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany

Declaración de cumplimiento UE: SZ DJI TECHNOLOGY CO., LTD. por la

presente declara que este dispositivo cumple los requisitos básicos y el resto de
provisiones relevantes de la Directive 2014/30/EU.
Hay disponible online una copia de la Declaración de conformidad UE en www.dji.
com/euro-compliance
Dirección de contacto de la UE: DJI GmbH, Industriestrasse 12, 97618, Niederlauer,
Germany

EU-verklaring van overeenstemming: SZ DJI TECHNOLOGY CO., LTD. verklaart

hierbij dat dit apparaat voldoet aan de essentiële vereisten en andere relevante
bepalingen van Richtlijn 2014/30/EU.
De EU-verklaring van overeenstemming is online beschikbaar op www.dji.com/euro-
compliance
Contactadres EU: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany

Declaração de conformidade da UE: A SZ DJI TECHNOLOGY CO., LTD. declara,

através deste documento, que este dispositivo está em conformidade com os
requisitos essenciais e outras disposições relevantes da Diretiva 2014/30/EU.
Existe uma cópia da Declaração de conformidade da UE disponível online em www.
dji.com/euro-compliance
46
Çevre dostu bertaraf
Eski elektrikli cihazlar, diğer atıklarla birlikte bertaraf edilmemeli, ayrıca atılmalıdır.
Özel kişiler aracılığıyla genel toplama noktasına bertaraf işlemi ücretsiz olarak
yapılmaktadır. Eski cihazların sahibi, cihazları bu toplama noktalarına veya benzer
toplama noktalarına getirmekten sorumludur. Bu az miktardaki kişisel çabayla, değerli
ham maddelerin geri dönüştürülmesine ve toksik maddelerin işleme alınmasına
katkıda bulunmuş olursunuz.

有害物质
部件名称 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚
(Pb) (Hg) (Cd) (Cr+6) (PBB) (PBDE)
线路板 × ○ ○ ○ ○ ○
外壳 × ○ ○ ○ ○ ○
金属部件
× ○ ○ ○ ○ ○
（铜合金）
内部线材 × ○ ○ ○ ○ ○
其他配件 × ○ ○ ○ ○ ○
本表格依据 SJ/T 11364 的规定编制。
○：表示该有害物质在该部件所有均质材料中的含量均在 GB/T 26572 规定的限量
要求以下。
×：表示该有害物质至少在该部件的某一均质材料中的含量超出 GB/T 26572 规定
的限量要求。（产品符合欧盟 ROHS 指令环保要求）

This content is subject to change.

Download the latest version from
http://www.dji.com/mini-2

DJI is a trademark of DJI.

Copyright © 2020 All Rights Reserved.

3Q4DM2CB02DY