Full Download of Steel Structures Design and Behavior 5th Edition Salmon Solutions Manual in PDF DOCX Format
Full Download of Steel Structures Design and Behavior 5th Edition Salmon Solutions Manual in PDF DOCX Format
https://testbankfan.com/product/steel-design-5th-edition-segui-
solutions-manual/
https://testbankfan.com/product/structural-steel-design-5th-edition-
mccormac-solutions-manual/
https://testbankfan.com/product/steel-design-6th-edition-segui-
solutions-manual/
https://testbankfan.com/product/structural-steel-design-a-practice-
oriented-approach-2nd-edition-aghayere-solutions-manual/
Design of Concrete Structures 15th Edition Darwin
Solutions Manual
https://testbankfan.com/product/design-of-concrete-structures-15th-
edition-darwin-solutions-manual/
https://testbankfan.com/product/design-of-wood-structures-asd-
lrfd-7th-edition-breyer-solutions-manual/
https://testbankfan.com/product/dynamics-of-structures-5th-edition-
chopra-solutions-manual/
https://testbankfan.com/product/data-structures-and-abstractions-with-
java-5th-edition-carrano-solutions-manual/
https://testbankfan.com/product/c-programming-program-design-
including-data-structures-7th-edition-malik-solutions-manual/
8.21. Assume a single W section is to serve as a crane runway girder which carries a
vertical loading, as shown. In addition, design must include an axial compressive force of
14 kips and a horizontal force of 4 kips on each wheel applied 4 14 in. above the top of the
compression flange. Assume torsional simple support at the ends of the beam. Select the
lightest W14 section of A992 steel using the β modified flexure analogy approach. Note:
All loads except weight of the crane runway girder are live loads.
(b) Use the β modified flexure analogy to find the equivalent lateral moment. Use β ≈ 0.5.
Tu 72.00
Vf = ≈ = 5.143 kips – flange force using h ≈ d
h 14
2Vf x2 (5.143)(19)2
Mf = β = 0.5 = 46.41 kips – flange moment
L 40
My = 2Mf = 2(46.41) = 92.83 kips – equivalent lateral moment
© 2010 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This publication is protected by Copyright and written permission should be obtained from
the publisher prior to any prohibited reproduction, storage in a retrieval system, or transmission in any form or by any means, electronic, mechanical, photocopying,
recording, or likewise. For information regarding permission(s), write to: Rights and Permissions Department, Pearson Education, Inc., Upper Saddle River, NJ 07458.
(c) Select a beam using AISC H1:
Mux Muy + My Sx 1531(12) (115.5 + 92.83)(12) Sx
Sx ≥ + = +
φb Fy φb Fy Sy 0.9(50) 0.9(50) Sy
Sx
≥ 408.2 + 55.56
Sy
For Sx on the order of 3 to 5: Sx ≈ 574.9 to 686.0 in.3
Assuming Zx ≈ 1.12Sx : Zx ≈ 643.8 to 768.3 in.3
Using AISC Table 3-2 Selection by Zx , for W14 beams, find W14×342 with
Zx = 672 in.3
(d) Check the beam more accurately using the properties from AISC Table 1-1.
r s
GJ (11154)(178)
λ= = = 0.02578
ECw (29000)(103000)
λL = (0.02578)(40)(12) = 12.38
β = 0.16 for a point load at x and simply supported ends
Tu = Wuy (d/2 + rail height) = 6.4(17.5/2 + 4.25) = 83.20 in-kips
Tu 83.20
Vf = = = 5.536 kips
h 15.03
2Vf x2 (5.536)(19)2
Mf = β = 0.16 = 16.19 ft-kips
L 40
My = 2Mf = 2(16.19) = 32.38 ft-kips
© 2010 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This publication is protected by Copyright and written permission should be obtained from
the publisher prior to any prohibited reproduction, storage in a retrieval system, or transmission in any form or by any means, electronic, mechanical, photocopying,
recording, or likewise. For information regarding permission(s), write to: Rights and Permissions Department, Pearson Education, Inc., Upper Saddle River, NJ 07458.
Exploring the Variety of Random
Documents with Different Content
PLEASE READ THIS BEFORE YOU DISTRIBUTE OR USE THIS WORK
1.D. The copyright laws of the place where you are located also
govern what you can do with this work. Copyright laws in most
countries are in a constant state of change. If you are outside
the United States, check the laws of your country in addition to
the terms of this agreement before downloading, copying,
displaying, performing, distributing or creating derivative works
based on this work or any other Project Gutenberg™ work. The
Foundation makes no representations concerning the copyright
status of any work in any country other than the United States.
1.E.6. You may convert to and distribute this work in any binary,
compressed, marked up, nonproprietary or proprietary form,
including any word processing or hypertext form. However, if
you provide access to or distribute copies of a Project
Gutenberg™ work in a format other than “Plain Vanilla ASCII” or
other format used in the official version posted on the official
Project Gutenberg™ website (www.gutenberg.org), you must,
at no additional cost, fee or expense to the user, provide a copy,
a means of exporting a copy, or a means of obtaining a copy
upon request, of the work in its original “Plain Vanilla ASCII” or
other form. Any alternate format must include the full Project
Gutenberg™ License as specified in paragraph 1.E.1.
• You pay a royalty fee of 20% of the gross profits you derive
from the use of Project Gutenberg™ works calculated using the
method you already use to calculate your applicable taxes. The
fee is owed to the owner of the Project Gutenberg™ trademark,
but he has agreed to donate royalties under this paragraph to
the Project Gutenberg Literary Archive Foundation. Royalty
payments must be paid within 60 days following each date on
which you prepare (or are legally required to prepare) your
periodic tax returns. Royalty payments should be clearly marked
as such and sent to the Project Gutenberg Literary Archive
Foundation at the address specified in Section 4, “Information
about donations to the Project Gutenberg Literary Archive
Foundation.”
• You comply with all other terms of this agreement for free
distribution of Project Gutenberg™ works.
1.F.
Most people start at our website which has the main PG search
facility: www.gutenberg.org.