User Manual

Shenzhen Huidu Technology Company www.huidu.cn

 CONTENT
Chapter 1 Interface connection ............................................................................................................... 3
Chapter 2 HDPlayer installation............................................................................................................. 11
Chapter 3 HD-C16L Parameter settings ................................................................................................. 13
3.1 Connection .............................................................................................................................................. 13
3.2 Basic Setting ............................................................................................................................................ 13
3.3 More setting ........................................................................................................................................... 17
3.3.1 Device information ....................................................................................................................... 17
3.3.2 WiFi setting .................................................................................................................................. 19
3.3.3 Volume setting ............................................................................................................................. 20
3.3.4 Brightness setting ......................................................................................................................... 21
3.3.5 Time correction ............................................................................................................................ 25

Shenzhen Huidu Technology Company www.huidu.cn

 3.3.6 Switch machines setting ............................................................................................................... 27
3.3.7 Relay setting ................................................................................................................................. 28
3.3.8 Network setting ............................................................................................................................ 29
3.3.9 Device lock setting........................................................................................................................ 30
Chaper 4 Async Program Editing and Publishing ................................................................................... 31

Shenzhen Huidu Technology Company www.huidu.cn

Chapter 1 Interface connection

1.1 HD-C16L Appearance and interface

Shenzhen Huidu Technology Company www.huidu.cn 3

 Serial
Name Description
number
Power input
1 DC 5V（4.6V~5.5V） 3A
terminal
Gigabit output network port, cascaded with HD-R series
2 Output network port
receiving cards
100M input network port communication, connect to computer to
3 Input network port
debug and publish programs, used to access LAN or Internet
4 Audio output TRS 3.5mm standard two-channel audio output port
5 USB Used to update programs or expand capacity
6 Wi-Fi antenna Connect Wi-Fi antenna to enhance wireless signal
7 Temperature sensor Connect a temperature sensor to monitor the surrounding

Shenzhen Huidu Technology Company www.huidu.cn 4

 dedicated interface environment temperature in real time
External temperature, humidity, brightness, wind speed, wind
8 Sensor interface
direction, noise, PM2.5, PM10, CO₂and other sensors
9 GPS interface Connect to GPS module for positioning and time adjustment
Relay on/off, supports maximum load: AC 250V~3A or DC
10 Relay 30V-3A
The connection method is as follows:

Shenzhen Huidu Technology Company www.huidu.cn 5

 11 HUB75E interface Connect HUB75 (B/D/E) interface module
PWR: Power indicator light, green light is always on, power input
is normal
System indicator
12 RUN: System running light. If the green light flashes, the system
light
is running normally; if the green light is always on or off, the
system is running abnormally.

Shenzhen Huidu Technology Company www.huidu.cn 6

 ① When detecting that no sensor is connected, the light does
Sensor indicator not light up;
13-1
light ②When detecting that a sensor is connected, the green light is
always on.
① When detecting that there is no GPS signal, the light does
not light up;
②When the GPS star search number < 4, the green light
13-2 GPS indicator light
flashes;
③When the GPS star search number >= 4, the green light is
always on.
Display indicator If the green light flashes, the FPGA system is running normally;
14
light if the green light is on or off, the system is running abnormally.

Shenzhen Huidu Technology Company www.huidu.cn 7

 AP mode:
①The AP mode is normal and the green light flashes;
②The module cannot be detected and the light does not light
up;
③Cannot connect to the hotspot and the red light flashes;
15 Wi-Fi indicator light
STA mode:
①STA mode is normal and the green light is always on;
②The bridge cannot connect to the Wi-Fi hotspot and the red
light is always on;
③Unable to connect to the server, the yellow light is always on.
4G module socket (optional function, installed with 4G antenna
16 PCIE-4G socket
by default)

Shenzhen Huidu Technology Company www.huidu.cn 8

 ①The green light is always on, and the connection to the cloud
server is successful;
②The yellow light is always on and cannot connect to the cloud
service;
4G communication
17 ③The red light is always on, there is no signal or the SIM is in
indicator light
arrears or cannot dial;
④The red light flashes and the SIM cannot be detected;
⑤The light does not light up and the module cannot be
detected.
Used to install 4G data card and provide networking function
18 SIM card holder
(optional, supports optional eSIM card)

Shenzhen Huidu Technology Company www.huidu.cn 9

1.2 Hardware connection

Shenzhen Huidu Technology Company www.huidu.cn 10

Chapter 2 HDPlayer installation

Please download the installation package of HDPlayer software from Huidu’s official website www.huidu.cn,
and complete the installation according to the diagrams below:
1.Run the software package,then select language for installer. Click [OK] to go on.

Shenzhen Huidu Technology Company www.huidu.cn 11

2.After selecting a language, an installation wizard like below will appear.Click [Next].
Choose components,default installation.
Choose the installation location, click [Browse] to change the default target location,then click [Install] after
completing;
After the installation is complete,you are ready to use HDPlayer.

Shenzhen Huidu Technology Company www.huidu.cn 12

Chapter 3 HD-C16L Parameter settings

3.1 Connection
Connect the C16L to the computer by CAT5/6 cable or WiFi(Default password:88888888).

3.2 Basic Setting

3.2.1 Create new screen for C16L
1.Run the HDPlayer software then it shows the C16L connected.
Shenzhen Huidu Technology Company www.huidu.cn 13
2.You need to create a new screen,then set the screen parameters.Click [OK] after you finish the setting.

Shenzhen Huidu Technology Company www.huidu.cn 14

Shenzhen Huidu Technology Company www.huidu.cn 15
3.After the previous steps,you can begin to edit the program.

Shenzhen Huidu Technology Company www.huidu.cn 16

3.3 More setting
3.3.1 Device information
You can view the running status of the device in the device information.

Shenzhen Huidu Technology Company www.huidu.cn 17

Play mode: Support single program loop and order of play.
Multi-screen Sync: Default setting is disable.If you want multiple screens to play synchronously, please
enable.

Shenzhen Huidu Technology Company www.huidu.cn 18

View the 3/4G network and sensor status.
3.3.2 WiFi setting
Edit WiFi switch, mode, name and password, etc.
Station mode enable C16L connect to the wireless network.

Shenzhen Huidu Technology Company www.huidu.cn 19

3.3.3 Volume setting
Fixed mode: set fixed volume

Shenzhen Huidu Technology Company www.huidu.cn 20

According to the time period:Set the time frame.

3.3.4 Brightness setting

Shenzhen Huidu Technology Company www.huidu.cn 21

Default mode: Set fixed brightness
Custom mode: Set the time frame for brightness
Automatic mode: C16L automatically change Brightness according to the sensor.
Sensitivity Indicates the frequency of detection.[High] means every 5 seconds;[in] mean 10;[low] mean 15.
You’d better set Brightness monitoring interval to 3400-7000.

Shenzhen Huidu Technology Company www.huidu.cn 22

Shenzhen Huidu Technology Company www.huidu.cn 23
Shenzhen Huidu Technology Company www.huidu.cn 24
3.3.5 Time correction
Set the system time zone. C16L support summer time.
Automatic synchronization:NTP mean time correct by network.Set GPS if installed the GPS module.Set RF if
installed the RF device.

Shenzhen Huidu Technology Company www.huidu.cn 25

Shenzhen Huidu Technology Company www.huidu.cn 26
3.3.6 Switch machines setting
Set on/off time for C16L.

Shenzhen Huidu Technology Company www.huidu.cn 27

3.3.7 Relay setting
C16L supports relay installation.

Shenzhen Huidu Technology Company www.huidu.cn 28

3.3.8 Network setting
Default is automatic acquisition. You can set fixed IP for A3L.

Shenzhen Huidu Technology Company www.huidu.cn 29

3.3.9 Device lock setting
Set password to lock the device. After that People without passwords will not be able to make operational
changes to the device.

Shenzhen Huidu Technology Company www.huidu.cn 30

Chaper 4 Async Program Editing and Publishing

4.1 Publish programs by HDPlayer

1. Create new program

Shenzhen Huidu Technology Company www.huidu.cn 31

2.Add content into Program

Shenzhen Huidu Technology Company www.huidu.cn 32

3. Sending interface

Shenzhen Huidu Technology Company www.huidu.cn 33

4.2 Publish programs by U-disk(FAT or FAT 32)

1. Export the program to the U-disk in HDPlayer

Shenzhen Huidu Technology Company www.huidu.cn 34

2. Publish the video and picture in the U-disk
Put the video and picture in the root catalog of U-disk

Shenzhen Huidu Technology Company www.huidu.cn 35

Shenzhen Huidu Technology Company www.huidu.cn 36