Project data

Project name
Project number
Author
Description
Date 11/20/2024
Code AISC/ACI

Material
Steel A992, A572 Gr.50, A1085. Gr.A, A500. Gr. B
Project item CON1

Design
Name CON1
Description
Analysis Stress, strain/ loads in equilibrium
Design code AISC - ASD (2022)

Members

Geometry
β – Direction γ - Pitch α - Rotation Offset ex Offset ey Offset ez
Name Cross-section
[°] [°] [°] [in] [in] [in]
CH 1 - W16x31(W16X31) 0.0 0.0 0.0 0.00 0.00 0.00
D2 3 - HSS5X5X.250 180.0 -45.0 0.0 -10.00 5.50 0.00

Supports and forces

X
Name Support Forces in
[in]
CH / begin N-Vy-Vz-Mx-My-Mz Node 0.00
CH / end Node 0.00
D2 / end Node 0.00
Cross-sections
Name Material
1 - W16x31(W16X31) A992
3 - HSS5X5X.250 A500. Gr. B

Load effects (forces in equilibrium)

N Vy Vz Mx My Mz
Name Member
[kip] [kip] [kip] [kip.ft] [kip.ft] [kip.ft]
LE1 CH / End 6.50 0.00 9.00 0.00 0.00 0.00
D2 / End 10.75 0.00 0.00 0.00 0.00 0.00
CH / Begin 6.50 0.00 -9.00 0.00 0.00 0.00

Unbalanced forces
X Y Z Mx My Mz
Name
[kip] [kip] [kip] [kip.ft] [kip.ft] [kip.ft]
LE1 5.40 0.00 -7.60 3.48 0.00 -3.48

Check

Summary
Name Value Check status
Analysis 100.0% OK
Plates 0.5 < 5.0% OK
Loc. deformation 0.3 < 3% OK
Welds 84.0 < 100% OK
Buckling Not calculated

Plates
tp σEd εPl σc,Ed
Name Material Loads Status
[in] [ksi] [%] [ksi]
CH-bfl 1 A992 7/16 LE1 30.0 0.2 0.0 OK
CH-tfl 1 A992 7/16 LE1 28.7 0.0 0.0 OK
CH-w 1 A992 1/4 LE1 28.6 0.0 0.0 OK
D2 A500. Gr. B 1/4 LE1 27.7 0.5 0.0 OK
SP2 A572 Gr.50 1/2 LE1 30.0 0.1 0.0 OK

Design data
Fy εlim
Material
[ksi] [%]
A992 50.0 5.0
A500. Gr. B 46.0 5.0
A572 Gr.50 50.0 5.0
Symbol explanation
tp Plate thickness
σEd Equivalent stress
εPl Plastic strain
σc,Ed Contact stress
Fy Yield strength
εlim Limit of plastic strain

Loc. deformation
d0 δ δlim δ/d0
Name Loads Check status
[in] [in] [in] [%]
D2 5.00 LE1 0.02 0.15 0.3 OK

Symbol explanation
d0 Cross-section size
δ Local cross-section deformation
δlim Allowed deformation

Overall check, LE1

Strain check, LE1

Equivalent stress, LE1

Welds
tw w L Lc Fn Rn/Ω Ut Utc
Item Edge Xu Loads Detailing Status
[in] [in] [in] [in] [kip] [kip] [%] [%]
CH-bfl 1 SP2 E70xx ◢ 3/16 ◣ ◢ 1/4 ◣ 2.76 0.92 LE1 3.42 4.49 76.1 57.7 OK OK
E70xx ◢ 3/16 ◣ ◢ 1/4 ◣ 2.76 0.92 LE1 3.91 5.12 76.3 60.0 OK OK
CH-tfl 1 SP2 E70xx ◢ 1/4 ◢ 3/8 2.76 0.92 LE1 5.40 7.60 71.1 46.7 OK OK
CH-w 1 SP2 E70xx ◢ 3/16 ◣ ◢ 1/4 ◣ 21.46 0.98 LE1 4.08 5.43 75.1 50.4 OK OK
E70xx ◢ 3/16 ◣ ◢ 1/4 ◣ 21.46 0.98 LE1 4.07 5.43 75.0 41.1 OK OK
D2-w 4 SP2 E70xx ◢ 1/8 ◣ ◢ 3/16 ◣ 20.62 0.31 LE1 0.96 1.15 84.0 79.8 OK OK
E70xx ◢ 1/8 ◣ ◢ 3/16 ◣ 20.49 0.31 LE1 0.76 0.99 76.4 59.7 OK OK

Design data
Fexx
Material
[ksi]
E70xx 70.0

Symbol explanation
tw Throat thickness of weld
w Leg size of weld
L Length of weld
Lc Length of weld critical element
Fn Force in weld critical element
Rn/Ω Weld resistance - AISC 360-22 – J2-4
Ut Utilization
Utc Weld capacity estimation
◢ Fillet weld
Fexx Ultimate strength as rated by electrode classification number

Buckling
Buckling analysis was not calculated.
Code settings
Item Value Unit Reference
Friction coefficient - concrete 0.40 - ACI 349-01 – B.6.1.4
Friction coefficient in slip-resistance 0.30 - AISC 360-22 – J3.9
Limit plastic strain 0.05 -
Detailing Yes
Distance between bolts [d] 2.66 - AISC 360-22 – J3.4
Concrete breakout resistance check Both
Base metal capacity check at weld fusion face No AISC 360-22 – J2-2
Deformation at bolt hole at service load is design
Yes AISC 360-22 – J3.11
consideration
Cracked concrete Yes ACI 318-14 – 17
Local deformation check Yes
Local deformation limit 0.03 - CIDECT DG 1, 3 - 1.1
Analysis with large deformations for hollow section
Geometrical nonlinearity (GMNA) Yes
joints