Traverse Engineering Consultancy Pvt. Ltd., Parsyang-5, Kaski.

DESIGN OF FLOOR SLAB

Design Data
Dimensions of the slab (c/c distance b/w supports), fck = 20 N/mm2 Depth of slab, D = 127.00 mm
Length of short span, Lx = 3.76 m fy = 500 N/mm2 Eff. Depth, d = 97.00 mm
Length of long span, Ly = 4.15 m Calculations (ly / lx) = 1.11 < 2
Width of the supporting beam, = 350 mm lx = 3.76 m (or) 3.507 m whichever is less 3.507 m
Clear cover to main reinforcement = 20 mm ly = 4.15 m (or) 3.897 m whichever is less 3.897 m
Assume dia. of reinforcement steel = 10 mm Here, (ly / lx) is < 2. So, design slab as two way slab.
Load Calculations
Dead Load of slab = 0.127 x 25 = 3.18 kN/m2 Dust Load on slab = 0 kN/m2
Finishes load on slab = 1.3 kN/m2 Other load on slab = 2 kN/m2
Live Load on slab = 3.0 kN/m 2

Total DL acting on the structure = 4.47 kN/m2

Total LL acting on the structure = 3.00 kN/m2
Factored design load w = 14.21 kN/m2
Support Condition (Type of panel according to support condition)
Two Adjacent Edges Discontinuous For this support condition,
Short span coefficient for (ly / lx) = 1.11, Long span coefficient,
For negative moment, ax = 0.0537 For negative moment, ay = 0.047
For positive moment, ax = 0.0405 For positive moment, ay = 0.035
Moment Calculation
Max. BM per unit width, Mx = ax w lx2 & My = ay w lx2
Mu Mu / bd2 Pt Ast, req Ast , min = (0.12/100) bD = 152 mm2
kNm N/mm 2
% mm 2
Reinforcement details
For Short Span, a) For Short Span
At mid span, 7.08 0.75 0.2177 211 Provide 10 0 mm dia @ 125.00 mm c/c at
At supports, 9.39 1.00 0.2952 286 mid span. (Ast provided = 628.319 mm2) > Ast,req OK
For Long span, Provide 10 0 mm dia @ 100.00 mm c/c at
At mid span, 6.12 0.65 0.1874 182 support. (Ast provided = 785.398 mm2) > Ast,req OK
At supports, 8.21 0.87 0.2546 247 b) For Long Span
Check for Deflection Provide 8 0 mm dia @ 125.00 mm c/c at
Percentage of tension reinforcement = 0.650 % mid span. (Ast provided = 402.124 mm2) > Ast,req OK
fs = 0.58 fy (Ast req / Ast pro) = 97.3869 N/mm2 Provide 8 0 mm dia @ 100.00 mm c/c at
Refer Fig. 4 of IS 456, support. (Ast provided = 502.655 mm2) > Ast,req OK
Modification factor = 2.00 Check for Shear
Basic span to effective depth Nominal shear force, Vu = 24.917 kN
= 26
ratio Nominal shear stress, τv = 0.257 N/mm2
Allowable (span / deff ) ratio = 52 Design shear strength of concrete for M20 & 0.65% of steel
Effective depth required = 67 mm Design shear strength, τc = 0.608 N/mm2
< d prov. k value for 127mm thick slab = 1.3
Hence OK Permissible shear stress, τc' = τck = 0.790 N/mm2
Check for Development Length Max. shear stress for M20 τc,max = 3.1 N/mm2
Design bond stress for M20, τbd = 1.2 N/mm 2 SAFE IN SHEAR
Development length Ld = 77.679 Φ ==> Dia. of bar M1 = 26.432 kNm V = 24.917 kN
Lo = 120.00 mm Check for flexural bond Φreq < 19.2976 mm OK
Summary
Depth of Slab, D = 127.00 mm = 5 in Short Span, lx = 3.507 m
For Short Span, Long Span, ly = 3.897 m
Provide 10 0 mm dia @ 5.0 in. c/c at mid span. Modification factor = 2.00
Provide 10 0 mm dia @ 4.0 in. c/c at support. L/d basic = 26
For Long Span, L/d permissible = 52.00
Provide 8 0 mm dia @ 5.0 in. c/c at mid span. L/d provided = 36.15

1 Structural Design Report

 Traverse Engineering Consultancy Pvt. Ltd., Parsyang-5, Kaski.

Provide 8 0 mm dia @ 6.0 in. c/c at support. Required modification factor = 1.39 OK

2 Structural Design Report

 CODE IS 456
TABLE Table 26
TITLE BM Coefficients for Rectangular Panels supported on four sides with Provision for Torsion at corners
CLAUSE D - 1.1 and 24.4.1

1 2 3 4 5 6 7 8 9 10 11
Short Span Coefficients (ax)

One Short Edge One Long Edge Two Adjacent Edges Two Short Edges
Interior Panels
Discontinuous Discontinuous Discontinuous Discontinuous

S.No. Values of ( ly / lx ) Negative Negative Negative Negative Negative

Positive Positive Positive Positive Positive
moment at moment at moment at moment at moment at
moment at moment at moment at moment at moment at
continuous continuous continuous continuous continuous
midspan midspan midspan midspan midspan
edge edge edge edge edge

1 1.00 0.0320 0.0240 0.0370 0.0280 0.0370 0.0280 0.0470 0.0350 0.0450 0.0350
2 1.01 0.0325 0.0244 0.0376 0.0284 0.0377 0.0285 0.0476 0.0355 0.0454 0.0352
3 1.02 0.0330 0.0248 0.0382 0.0288 0.0384 0.0290 0.0482 0.0360 0.0458 0.0354
4 1.03 0.0335 0.0252 0.0388 0.0292 0.0391 0.0295 0.0488 0.0365 0.0462 0.0356
5 1.04 0.0340 0.0256 0.0394 0.0296 0.0398 0.0300 0.0494 0.0370 0.0466 0.0358
6 1.05 0.0345 0.0260 0.0400 0.0300 0.0405 0.0305 0.0500 0.0375 0.0470 0.0360
7 1.06 0.0350 0.0264 0.0406 0.0304 0.0412 0.0310 0.0506 0.0380 0.0474 0.0362
8 1.07 0.0355 0.0268 0.0412 0.0308 0.0419 0.0315 0.0512 0.0385 0.0478 0.0364
9 1.08 0.0360 0.0272 0.0418 0.0312 0.0426 0.0320 0.0518 0.0390 0.0482 0.0366
10 1.09 0.0365 0.0276 0.0424 0.0316 0.0433 0.0325 0.0524 0.0395 0.0486 0.0368
11 1.10 0.0370 0.0280 0.0430 0.0320 0.0440 0.0330 0.0530 0.0400 0.0490 0.0370
12 1.11 0.0376 0.0284 0.0435 0.0324 0.0448 0.0336 0.0537 0.0405 0.0493 0.0373
13 1.12 0.0382 0.0288 0.0440 0.0328 0.0456 0.0342 0.0544 0.0410 0.0496 0.0376
 CODE IS 456
TABLE Table 26
TITLE BM Coefficients for Rectangular Panels supported on four sides with Provision for Torsion at corners
CLAUSE D - 1.1 and 24.4.1

1 2 3 4 5 6 7 8 9 10 11
Short Span Coefficients (ax)

One Short Edge One Long Edge Two Adjacent Edges Two Short Edges
Interior Panels
Discontinuous Discontinuous Discontinuous Discontinuous

S.No. Values of ( ly / lx ) Negative Negative Negative Negative Negative

Positive Positive Positive Positive Positive
moment at moment at moment at moment at moment at
moment at moment at moment at moment at moment at
continuous continuous continuous continuous continuous
midspan midspan midspan midspan midspan
edge edge edge edge edge

14 1.13 0.0388 0.0292 0.0445 0.0332 0.0464 0.0348 0.0551 0.0415 0.0499 0.0379
15 1.14 0.0394 0.0296 0.0450 0.0336 0.0472 0.0354 0.0558 0.0420 0.0502 0.0382
16 1.15 0.0400 0.0300 0.0455 0.0340 0.0480 0.0360 0.0565 0.0425 0.0505 0.0385
17 1.16 0.0406 0.0304 0.0460 0.0344 0.0488 0.0366 0.0572 0.0430 0.0508 0.0388
18 1.17 0.0412 0.0308 0.0465 0.0348 0.0496 0.0372 0.0579 0.0435 0.0511 0.0391
19 1.18 0.0418 0.0312 0.0470 0.0352 0.0504 0.0378 0.0586 0.0440 0.0514 0.0394
20 1.19 0.0424 0.0316 0.0475 0.0356 0.0512 0.0384 0.0593 0.0445 0.0517 0.0397
21 1.20 0.0430 0.0320 0.0480 0.0360 0.0520 0.0390 0.0600 0.0450 0.0520 0.0400
22 1.21 0.0434 0.0324 0.0483 0.0363 0.0525 0.0395 0.0605 0.0454 0.0524 0.0403
23 1.22 0.0438 0.0328 0.0486 0.0366 0.0530 0.0400 0.0610 0.0458 0.0528 0.0406
24 1.23 0.0442 0.0332 0.0489 0.0369 0.0535 0.0405 0.0615 0.0462 0.0532 0.0409
25 1.24 0.0446 0.0336 0.0492 0.0372 0.0540 0.0410 0.0620 0.0466 0.0536 0.0412
26 1.25 0.0450 0.0340 0.0495 0.0375 0.0545 0.0415 0.0625 0.0470 0.0540 0.0415
 CODE IS 456
TABLE Table 26
TITLE BM Coefficients for Rectangular Panels supported on four sides with Provision for Torsion at corners
CLAUSE D - 1.1 and 24.4.1

1 2 3 4 5 6 7 8 9 10 11
Short Span Coefficients (ax)

One Short Edge One Long Edge Two Adjacent Edges Two Short Edges
Interior Panels
Discontinuous Discontinuous Discontinuous Discontinuous

S.No. Values of ( ly / lx ) Negative Negative Negative Negative Negative

Positive Positive Positive Positive Positive
moment at moment at moment at moment at moment at
moment at moment at moment at moment at moment at
continuous continuous continuous continuous continuous
midspan midspan midspan midspan midspan
edge edge edge edge edge

27 1.26 0.0454 0.0344 0.0498 0.0378 0.0550 0.0420 0.0630 0.0474 0.0544 0.0418
28 1.27 0.0458 0.0348 0.0501 0.0381 0.0555 0.0425 0.0635 0.0478 0.0548 0.0421
29 1.28 0.0462 0.0352 0.0504 0.0384 0.0560 0.0430 0.0640 0.0482 0.0552 0.0424
30 1.29 0.0466 0.0356 0.0507 0.0387 0.0565 0.0435 0.0645 0.0486 0.0556 0.0427
31 1.30 0.0470 0.0360 0.0510 0.0390 0.0570 0.0440 0.0650 0.0490 0.0560 0.0430
32 1.31 0.0474 0.0363 0.0514 0.0392 0.0576 0.0443 0.0656 0.0494 0.0563 0.0431
33 1.32 0.0478 0.0366 0.0518 0.0394 0.0582 0.0446 0.0662 0.0498 0.0566 0.0432
34 1.33 0.0482 0.0369 0.0522 0.0396 0.0588 0.0449 0.0668 0.0502 0.0569 0.0433
35 1.34 0.0486 0.0372 0.0526 0.0398 0.0594 0.0452 0.0674 0.0506 0.0572 0.0434
36 1.35 0.0490 0.0375 0.0530 0.0400 0.0600 0.0455 0.0680 0.0510 0.0575 0.0435
37 1.36 0.0494 0.0378 0.0534 0.0402 0.0606 0.0458 0.0686 0.0514 0.0578 0.0436
38 1.37 0.0498 0.0381 0.0538 0.0404 0.0612 0.0461 0.0692 0.0518 0.0581 0.0437
39 1.38 0.0502 0.0384 0.0542 0.0406 0.0618 0.0464 0.0698 0.0522 0.0584 0.0438
 CODE IS 456
TABLE Table 26
TITLE BM Coefficients for Rectangular Panels supported on four sides with Provision for Torsion at corners
CLAUSE D - 1.1 and 24.4.1

1 2 3 4 5 6 7 8 9 10 11
Short Span Coefficients (ax)

One Short Edge One Long Edge Two Adjacent Edges Two Short Edges
Interior Panels
Discontinuous Discontinuous Discontinuous Discontinuous

S.No. Values of ( ly / lx ) Negative Negative Negative Negative Negative

Positive Positive Positive Positive Positive
moment at moment at moment at moment at moment at
moment at moment at moment at moment at moment at
continuous continuous continuous continuous continuous
midspan midspan midspan midspan midspan
edge edge edge edge edge

40 1.39 0.0506 0.0387 0.0546 0.0408 0.0624 0.0467 0.0704 0.0526 0.0587 0.0439
41 1.40 0.0510 0.0390 0.0550 0.0410 0.0630 0.0470 0.0710 0.0530 0.0590 0.0440
42 1.41 0.0512 0.0392 0.0552 0.0413 0.0634 0.0474 0.0714 0.0533 0.0591 0.0441
43 1.42 0.0514 0.0394 0.0554 0.0416 0.0638 0.0478 0.0718 0.0536 0.0592 0.0442
44 1.43 0.0516 0.0396 0.0556 0.0419 0.0642 0.0482 0.0722 0.0539 0.0593 0.0443
45 1.44 0.0518 0.0398 0.0558 0.0422 0.0646 0.0486 0.0726 0.0542 0.0594 0.0444
46 1.45 0.0520 0.0400 0.0560 0.0425 0.0650 0.0490 0.0730 0.0545 0.0595 0.0445
47 1.46 0.0522 0.0402 0.0562 0.0428 0.0654 0.0494 0.0734 0.0548 0.0596 0.0446
48 1.47 0.0524 0.0404 0.0564 0.0431 0.0658 0.0498 0.0738 0.0551 0.0597 0.0447
49 1.48 0.0526 0.0406 0.0566 0.0434 0.0662 0.0502 0.0742 0.0554 0.0598 0.0448
50 1.49 0.0528 0.0408 0.0568 0.0437 0.0666 0.0506 0.0746 0.0557 0.0599 0.0449
51 1.50 0.0530 0.0410 0.0570 0.0440 0.0670 0.0510 0.0750 0.0560 0.0600 0.0450
52 1.51 0.0533 0.0412 0.0573 0.0442 0.0674 0.0513 0.0754 0.0563 0.0602 0.0452
 CODE IS 456
TABLE Table 26
TITLE BM Coefficients for Rectangular Panels supported on four sides with Provision for Torsion at corners
CLAUSE D - 1.1 and 24.4.1

1 2 3 4 5 6 7 8 9 10 11
Short Span Coefficients (ax)

One Short Edge One Long Edge Two Adjacent Edges Two Short Edges
Interior Panels
Discontinuous Discontinuous Discontinuous Discontinuous

S.No. Values of ( ly / lx ) Negative Negative Negative Negative Negative

Positive Positive Positive Positive Positive
moment at moment at moment at moment at moment at
moment at moment at moment at moment at moment at
continuous continuous continuous continuous continuous
midspan midspan midspan midspan midspan
edge edge edge edge edge

53 1.52 0.0536 0.0413 0.0576 0.0443 0.0678 0.0516 0.0757 0.0566 0.0604 0.0453
54 1.53 0.0538 0.0415 0.0578 0.0445 0.0682 0.0520 0.0761 0.0568 0.0606 0.0455
55 1.54 0.0541 0.0416 0.0581 0.0446 0.0686 0.0523 0.0764 0.0571 0.0608 0.0456
56 1.55 0.0544 0.0418 0.0584 0.0448 0.0690 0.0526 0.0768 0.0574 0.0610 0.0458
57 1.56 0.0547 0.0420 0.0587 0.0450 0.0694 0.0529 0.0772 0.0577 0.0612 0.0460
58 1.57 0.0550 0.0421 0.0590 0.0451 0.0698 0.0532 0.0775 0.0580 0.0614 0.0461
59 1.58 0.0552 0.0423 0.0592 0.0453 0.0702 0.0536 0.0779 0.0582 0.0616 0.0463
60 1.59 0.0555 0.0424 0.0595 0.0454 0.0706 0.0539 0.0782 0.0585 0.0618 0.0464
61 1.60 0.0558 0.0426 0.0598 0.0456 0.0710 0.0542 0.0786 0.0588 0.0620 0.0466
62 1.61 0.0561 0.0428 0.0601 0.0458 0.0714 0.0545 0.0790 0.0591 0.0622 0.0468
63 1.62 0.0564 0.0429 0.0604 0.0459 0.0718 0.0548 0.0793 0.0594 0.0624 0.0469
64 1.63 0.0566 0.0431 0.0606 0.0461 0.0722 0.0552 0.0797 0.0596 0.0626 0.0471
65 1.64 0.0569 0.0432 0.0609 0.0462 0.0726 0.0555 0.0800 0.0599 0.0628 0.0472
 CODE IS 456
TABLE Table 26
TITLE BM Coefficients for Rectangular Panels supported on four sides with Provision for Torsion at corners
CLAUSE D - 1.1 and 24.4.1

1 2 3 4 5 6 7 8 9 10 11
Short Span Coefficients (ax)

One Short Edge One Long Edge Two Adjacent Edges Two Short Edges
Interior Panels
Discontinuous Discontinuous Discontinuous Discontinuous

S.No. Values of ( ly / lx ) Negative Negative Negative Negative Negative

Positive Positive Positive Positive Positive
moment at moment at moment at moment at moment at
moment at moment at moment at moment at moment at
continuous continuous continuous continuous continuous
midspan midspan midspan midspan midspan
edge edge edge edge edge

66 1.65 0.0572 0.0434 0.0612 0.0464 0.0730 0.0558 0.0804 0.0602 0.0630 0.0474
67 1.66 0.0575 0.0436 0.0615 0.0466 0.0734 0.0561 0.0808 0.0605 0.0632 0.0476
68 1.67 0.0578 0.0437 0.0618 0.0467 0.0738 0.0564 0.0811 0.0608 0.0634 0.0477
69 1.68 0.0580 0.0439 0.0620 0.0469 0.0742 0.0568 0.0815 0.0610 0.0636 0.0479
70 1.69 0.0583 0.0440 0.0623 0.0470 0.0746 0.0571 0.0818 0.0613 0.0638 0.0480
71 1.70 0.0586 0.0442 0.0626 0.0472 0.0750 0.0574 0.0822 0.0616 0.0640 0.0482
72 1.71 0.0589 0.0444 0.0629 0.0474 0.0754 0.0577 0.0826 0.0619 0.0642 0.0484
73 1.72 0.0592 0.0445 0.0632 0.0475 0.0758 0.0580 0.0829 0.0622 0.0644 0.0485
74 1.73 0.0594 0.0447 0.0634 0.0477 0.0762 0.0584 0.0833 0.0624 0.0646 0.0487
75 1.74 0.0597 0.0448 0.0637 0.0478 0.0766 0.0587 0.0836 0.0627 0.0648 0.0488
76 1.75 0.0600 0.0450 0.0640 0.0480 0.0770 0.0590 0.0840 0.0630 0.0650 0.0490
77 1.76 0.0602 0.0452 0.0642 0.0482 0.0773 0.0592 0.0843 0.0632 0.0652 0.0491
78 1.77 0.0604 0.0453 0.0643 0.0483 0.0776 0.0595 0.0846 0.0635 0.0653 0.0492
 CODE IS 456
TABLE Table 26
TITLE BM Coefficients for Rectangular Panels supported on four sides with Provision for Torsion at corners
CLAUSE D - 1.1 and 24.4.1

1 2 3 4 5 6 7 8 9 10 11
Short Span Coefficients (ax)

One Short Edge One Long Edge Two Adjacent Edges Two Short Edges
Interior Panels
Discontinuous Discontinuous Discontinuous Discontinuous

S.No. Values of ( ly / lx ) Negative Negative Negative Negative Negative

Positive Positive Positive Positive Positive
moment at moment at moment at moment at moment at
moment at moment at moment at moment at moment at
continuous continuous continuous continuous continuous
midspan midspan midspan midspan midspan
edge edge edge edge edge

79 1.78 0.0606 0.0455 0.0645 0.0485 0.0780 0.0597 0.0848 0.0637 0.0655 0.0494
80 1.79 0.0608 0.0456 0.0646 0.0486 0.0783 0.0600 0.0851 0.0640 0.0656 0.0495
81 1.80 0.0610 0.0458 0.0648 0.0488 0.0786 0.0602 0.0854 0.0642 0.0658 0.0496
82 1.81 0.0612 0.0460 0.0650 0.0490 0.0789 0.0604 0.0857 0.0644 0.0660 0.0497
83 1.82 0.0614 0.0461 0.0651 0.0491 0.0792 0.0607 0.0860 0.0647 0.0661 0.0498
84 1.83 0.0616 0.0463 0.0653 0.0493 0.0796 0.0609 0.0862 0.0649 0.0663 0.0500
85 1.84 0.0618 0.0464 0.0654 0.0494 0.0799 0.0612 0.0865 0.0652 0.0664 0.0501
86 1.85 0.0620 0.0466 0.0656 0.0496 0.0802 0.0614 0.0868 0.0654 0.0666 0.0502
87 1.86 0.0622 0.0468 0.0658 0.0498 0.0805 0.0616 0.0871 0.0656 0.0668 0.0503
88 1.87 0.0624 0.0469 0.0659 0.0499 0.0808 0.0619 0.0874 0.0659 0.0669 0.0504
89 1.88 0.0626 0.0471 0.0661 0.0501 0.0812 0.0621 0.0876 0.0661 0.0671 0.0506
90 1.89 0.0628 0.0472 0.0662 0.0502 0.0815 0.0624 0.0879 0.0664 0.0672 0.0507
91 1.90 0.0630 0.0474 0.0664 0.0504 0.0818 0.0626 0.0882 0.0666 0.0674 0.0508
 CODE IS 456
TABLE Table 26
TITLE BM Coefficients for Rectangular Panels supported on four sides with Provision for Torsion at corners
CLAUSE D - 1.1 and 24.4.1

1 2 3 4 5 6 7 8 9 10 11
Short Span Coefficients (ax)

One Short Edge One Long Edge Two Adjacent Edges Two Short Edges
Interior Panels
Discontinuous Discontinuous Discontinuous Discontinuous

S.No. Values of ( ly / lx ) Negative Negative Negative Negative Negative

Positive Positive Positive Positive Positive
moment at moment at moment at moment at moment at
moment at moment at moment at moment at moment at
continuous continuous continuous continuous continuous
midspan midspan midspan midspan midspan
edge edge edge edge edge

92 1.91 0.0632 0.0476 0.0666 0.0506 0.0821 0.0628 0.0885 0.0668 0.0676 0.0509
93 1.92 0.0634 0.0477 0.0667 0.0507 0.0824 0.0631 0.0888 0.0671 0.0677 0.0510
94 1.93 0.0636 0.0479 0.0669 0.0509 0.0828 0.0633 0.0890 0.0673 0.0679 0.0512
95 1.94 0.0638 0.0480 0.0670 0.0510 0.0831 0.0636 0.0893 0.0676 0.0680 0.0513
96 1.95 0.0640 0.0482 0.0672 0.0512 0.0834 0.0638 0.0896 0.0678 0.0682 0.0514
97 1.96 0.0642 0.0484 0.0674 0.0514 0.0837 0.0640 0.0899 0.0680 0.0684 0.0515
98 1.97 0.0644 0.0485 0.0675 0.0515 0.0840 0.0643 0.0902 0.0683 0.0685 0.0516
99 1.98 0.0646 0.0487 0.0677 0.0517 0.0844 0.0645 0.0904 0.0685 0.0687 0.0518
100 1.99 0.0648 0.0488 0.0678 0.0518 0.0847 0.0648 0.0907 0.0688 0.0688 0.0519
101 2.00 0.0650 0.0490 0.0680 0.0520 0.0850 0.0650 0.0910 0.0690 0.0690 0.0520
 CODE IS 456
TABLE Table 26
TITLE BM Coefficients for Rectangular Panels supported on four sides with Provision for Torsion at corners
CLAUSE D - 1.1 and 24.4.1

1 12 13 14 15 16 17 18
Short Span Coefficients (ax)
Three Edges Three Edges
Two Long Edges
Discontinuous (One Long Discontinuous (One Short Four Edges Discontinuous
Discontinuous
Edge Continuous) Edge Continuous)
S.No. Values of ( ly / lx ) Negative Negative Negative Negative
Positive Positive Positive Positive
moment at moment at moment at moment at
moment at moment at moment at moment at
continuous continuous continuous continuous
midspan midspan midspan midspan
edge edge edge edge

1 1.00 0.0000 0.0350 0.0570 0.0430 0.0000 0.0430 0.0000 0.0560

2 1.01 0.0000 0.0358 0.0577 0.0435 0.0000 0.0438 0.0000 0.0568
3 1.02 0.0000 0.0366 0.0584 0.0440 0.0000 0.0446 0.0000 0.0576
4 1.03 0.0000 0.0374 0.0591 0.0445 0.0000 0.0454 0.0000 0.0584
5 1.04 0.0000 0.0382 0.0598 0.0450 0.0000 0.0462 0.0000 0.0592
6 1.05 0.0000 0.0390 0.0605 0.0455 0.0000 0.0470 0.0000 0.0600
7 1.06 0.0000 0.0398 0.0612 0.0460 0.0000 0.0478 0.0000 0.0608
8 1.07 0.0000 0.0406 0.0619 0.0465 0.0000 0.0486 0.0000 0.0616
9 1.08 0.0000 0.0414 0.0626 0.0470 0.0000 0.0494 0.0000 0.0624
10 1.09 0.0000 0.0422 0.0633 0.0475 0.0000 0.0502 0.0000 0.0632
11 1.10 0.0000 0.0430 0.0640 0.0480 0.0000 0.0510 0.0000 0.0640
12 1.11 0.0000 0.0438 0.0647 0.0485 0.0000 0.0518 0.0000 0.0648
13 1.12 0.0000 0.0446 0.0654 0.0490 0.0000 0.0526 0.0000 0.0656
 CODE IS 456
TABLE Table 26
TITLE BM Coefficients for Rectangular Panels supported on four sides with Provision for Torsion at corners
CLAUSE D - 1.1 and 24.4.1

1 12 13 14 15 16 17 18
Short Span Coefficients (ax)
Three Edges Three Edges
Two Long Edges
Discontinuous (One Long Discontinuous (One Short Four Edges Discontinuous
Discontinuous
Edge Continuous) Edge Continuous)
S.No. Values of ( ly / lx ) Negative Negative Negative Negative
Positive Positive Positive Positive
moment at moment at moment at moment at
moment at moment at moment at moment at
continuous continuous continuous continuous
midspan midspan midspan midspan
edge edge edge edge

14 1.13 0.0000 0.0454 0.0661 0.0495 0.0000 0.0534 0.0000 0.0664

15 1.14 0.0000 0.0462 0.0668 0.0500 0.0000 0.0542 0.0000 0.0672
16 1.15 0.0000 0.0470 0.0675 0.0505 0.0000 0.0550 0.0000 0.0680
17 1.16 0.0000 0.0478 0.0682 0.0510 0.0000 0.0558 0.0000 0.0688
18 1.17 0.0000 0.0486 0.0689 0.0515 0.0000 0.0566 0.0000 0.0696
19 1.18 0.0000 0.0494 0.0696 0.0520 0.0000 0.0574 0.0000 0.0704
20 1.19 0.0000 0.0502 0.0703 0.0525 0.0000 0.0582 0.0000 0.0712
21 1.20 0.0000 0.0510 0.0710 0.0530 0.0000 0.0590 0.0000 0.0720
22 1.21 0.0000 0.0516 0.0715 0.0534 0.0000 0.0596 0.0000 0.0727
23 1.22 0.0000 0.0522 0.0720 0.0538 0.0000 0.0602 0.0000 0.0734
24 1.23 0.0000 0.0528 0.0725 0.0542 0.0000 0.0608 0.0000 0.0741
25 1.24 0.0000 0.0534 0.0730 0.0546 0.0000 0.0614 0.0000 0.0748
26 1.25 0.0000 0.0540 0.0735 0.0550 0.0000 0.0620 0.0000 0.0755
 CODE IS 456
TABLE Table 26
TITLE BM Coefficients for Rectangular Panels supported on four sides with Provision for Torsion at corners
CLAUSE D - 1.1 and 24.4.1

1 12 13 14 15 16 17 18
Short Span Coefficients (ax)
Three Edges Three Edges
Two Long Edges
Discontinuous (One Long Discontinuous (One Short Four Edges Discontinuous
Discontinuous
Edge Continuous) Edge Continuous)
S.No. Values of ( ly / lx ) Negative Negative Negative Negative
Positive Positive Positive Positive
moment at moment at moment at moment at
moment at moment at moment at moment at
continuous continuous continuous continuous
midspan midspan midspan midspan
edge edge edge edge

27 1.26 0.0000 0.0546 0.0740 0.0554 0.0000 0.0626 0.0000 0.0762

28 1.27 0.0000 0.0552 0.0745 0.0558 0.0000 0.0632 0.0000 0.0769
29 1.28 0.0000 0.0558 0.0750 0.0562 0.0000 0.0638 0.0000 0.0776
30 1.29 0.0000 0.0564 0.0755 0.0566 0.0000 0.0644 0.0000 0.0783
31 1.30 0.0000 0.0570 0.0760 0.0570 0.0000 0.0650 0.0000 0.0790
32 1.31 0.0000 0.0576 0.0764 0.0573 0.0000 0.0656 0.0000 0.0796
33 1.32 0.0000 0.0582 0.0768 0.0576 0.0000 0.0662 0.0000 0.0802
34 1.33 0.0000 0.0588 0.0772 0.0579 0.0000 0.0668 0.0000 0.0808
35 1.34 0.0000 0.0594 0.0776 0.0582 0.0000 0.0674 0.0000 0.0814
36 1.35 0.0000 0.0600 0.0780 0.0585 0.0000 0.0680 0.0000 0.0820
37 1.36 0.0000 0.0606 0.0784 0.0588 0.0000 0.0686 0.0000 0.0826
38 1.37 0.0000 0.0612 0.0788 0.0591 0.0000 0.0692 0.0000 0.0832
39 1.38 0.0000 0.0618 0.0792 0.0594 0.0000 0.0698 0.0000 0.0838
 CODE IS 456
TABLE Table 26
TITLE BM Coefficients for Rectangular Panels supported on four sides with Provision for Torsion at corners
CLAUSE D - 1.1 and 24.4.1

1 12 13 14 15 16 17 18
Short Span Coefficients (ax)
Three Edges Three Edges
Two Long Edges
Discontinuous (One Long Discontinuous (One Short Four Edges Discontinuous
Discontinuous
Edge Continuous) Edge Continuous)
S.No. Values of ( ly / lx ) Negative Negative Negative Negative
Positive Positive Positive Positive
moment at moment at moment at moment at
moment at moment at moment at moment at
continuous continuous continuous continuous
midspan midspan midspan midspan
edge edge edge edge

40 1.39 0.0000 0.0624 0.0796 0.0597 0.0000 0.0704 0.0000 0.0844

41 1.40 0.0000 0.0630 0.0800 0.0600 0.0000 0.0710 0.0000 0.0850
42 1.41 0.0000 0.0635 0.0804 0.0604 0.0000 0.0715 0.0000 0.0854
43 1.42 0.0000 0.0640 0.0808 0.0608 0.0000 0.0720 0.0000 0.0858
44 1.43 0.0000 0.0645 0.0812 0.0612 0.0000 0.0725 0.0000 0.0862
45 1.44 0.0000 0.0650 0.0816 0.0616 0.0000 0.0730 0.0000 0.0866
46 1.45 0.0000 0.0655 0.0820 0.0620 0.0000 0.0735 0.0000 0.0870
47 1.46 0.0000 0.0660 0.0824 0.0624 0.0000 0.0740 0.0000 0.0874
48 1.47 0.0000 0.0665 0.0828 0.0628 0.0000 0.0745 0.0000 0.0878
49 1.48 0.0000 0.0670 0.0832 0.0632 0.0000 0.0750 0.0000 0.0882
50 1.49 0.0000 0.0675 0.0836 0.0636 0.0000 0.0755 0.0000 0.0886
51 1.50 0.0000 0.0680 0.0840 0.0640 0.0000 0.0760 0.0000 0.0890
52 1.51 0.0000 0.0685 0.0843 0.0642 0.0000 0.0764 0.0000 0.0894
 CODE IS 456
TABLE Table 26
TITLE BM Coefficients for Rectangular Panels supported on four sides with Provision for Torsion at corners
CLAUSE D - 1.1 and 24.4.1

1 12 13 14 15 16 17 18
Short Span Coefficients (ax)
Three Edges Three Edges
Two Long Edges
Discontinuous (One Long Discontinuous (One Short Four Edges Discontinuous
Discontinuous
Edge Continuous) Edge Continuous)
S.No. Values of ( ly / lx ) Negative Negative Negative Negative
Positive Positive Positive Positive
moment at moment at moment at moment at
moment at moment at moment at moment at
continuous continuous continuous continuous
midspan midspan midspan midspan
edge edge edge edge

53 1.52 0.0000 0.0690 0.0846 0.0644 0.0000 0.0769 0.0000 0.0899

54 1.53 0.0000 0.0694 0.0848 0.0646 0.0000 0.0773 0.0000 0.0903
55 1.54 0.0000 0.0699 0.0851 0.0648 0.0000 0.0778 0.0000 0.0908
56 1.55 0.0000 0.0704 0.0854 0.0650 0.0000 0.0782 0.0000 0.0912
57 1.56 0.0000 0.0709 0.0857 0.0652 0.0000 0.0786 0.0000 0.0916
58 1.57 0.0000 0.0714 0.0860 0.0654 0.0000 0.0791 0.0000 0.0921
59 1.58 0.0000 0.0718 0.0862 0.0656 0.0000 0.0795 0.0000 0.0925
60 1.59 0.0000 0.0723 0.0865 0.0658 0.0000 0.0800 0.0000 0.0930
61 1.60 0.0000 0.0728 0.0868 0.0660 0.0000 0.0804 0.0000 0.0934
62 1.61 0.0000 0.0733 0.0871 0.0662 0.0000 0.0808 0.0000 0.0938
63 1.62 0.0000 0.0738 0.0874 0.0664 0.0000 0.0813 0.0000 0.0943
64 1.63 0.0000 0.0742 0.0876 0.0666 0.0000 0.0817 0.0000 0.0947
65 1.64 0.0000 0.0747 0.0879 0.0668 0.0000 0.0822 0.0000 0.0952
 CODE IS 456
TABLE Table 26
TITLE BM Coefficients for Rectangular Panels supported on four sides with Provision for Torsion at corners
CLAUSE D - 1.1 and 24.4.1

1 12 13 14 15 16 17 18
Short Span Coefficients (ax)
Three Edges Three Edges
Two Long Edges
Discontinuous (One Long Discontinuous (One Short Four Edges Discontinuous
Discontinuous
Edge Continuous) Edge Continuous)
S.No. Values of ( ly / lx ) Negative Negative Negative Negative
Positive Positive Positive Positive
moment at moment at moment at moment at
moment at moment at moment at moment at
continuous continuous continuous continuous
midspan midspan midspan midspan
edge edge edge edge

66 1.65 0.0000 0.0752 0.0882 0.0670 0.0000 0.0826 0.0000 0.0956

67 1.66 0.0000 0.0757 0.0885 0.0672 0.0000 0.0830 0.0000 0.0960
68 1.67 0.0000 0.0762 0.0888 0.0674 0.0000 0.0835 0.0000 0.0965
69 1.68 0.0000 0.0766 0.0890 0.0676 0.0000 0.0839 0.0000 0.0969
70 1.69 0.0000 0.0771 0.0893 0.0678 0.0000 0.0844 0.0000 0.0974
71 1.70 0.0000 0.0776 0.0896 0.0680 0.0000 0.0848 0.0000 0.0978
72 1.71 0.0000 0.0781 0.0899 0.0682 0.0000 0.0852 0.0000 0.0982
73 1.72 0.0000 0.0786 0.0902 0.0684 0.0000 0.0857 0.0000 0.0987
74 1.73 0.0000 0.0790 0.0904 0.0686 0.0000 0.0861 0.0000 0.0991
75 1.74 0.0000 0.0795 0.0907 0.0688 0.0000 0.0866 0.0000 0.0996
76 1.75 0.0000 0.0800 0.0910 0.0690 0.0000 0.0870 0.0000 0.1000
77 1.76 0.0000 0.0803 0.0912 0.0692 0.0000 0.0874 0.0000 0.1003
78 1.77 0.0000 0.0806 0.0915 0.0693 0.0000 0.0877 0.0000 0.1006
 CODE IS 456
TABLE Table 26
TITLE BM Coefficients for Rectangular Panels supported on four sides with Provision for Torsion at corners
CLAUSE D - 1.1 and 24.4.1

1 12 13 14 15 16 17 18
Short Span Coefficients (ax)
Three Edges Three Edges
Two Long Edges
Discontinuous (One Long Discontinuous (One Short Four Edges Discontinuous
Discontinuous
Edge Continuous) Edge Continuous)
S.No. Values of ( ly / lx ) Negative Negative Negative Negative
Positive Positive Positive Positive
moment at moment at moment at moment at
moment at moment at moment at moment at
continuous continuous continuous continuous
midspan midspan midspan midspan
edge edge edge edge

79 1.78 0.0000 0.0810 0.0917 0.0695 0.0000 0.0881 0.0000 0.1008

80 1.79 0.0000 0.0813 0.0920 0.0696 0.0000 0.0884 0.0000 0.1011
81 1.80 0.0000 0.0816 0.0922 0.0698 0.0000 0.0888 0.0000 0.1014
82 1.81 0.0000 0.0819 0.0924 0.0700 0.0000 0.0892 0.0000 0.1017
83 1.82 0.0000 0.0822 0.0927 0.0701 0.0000 0.0895 0.0000 0.1020
84 1.83 0.0000 0.0826 0.0929 0.0703 0.0000 0.0899 0.0000 0.1022
85 1.84 0.0000 0.0829 0.0932 0.0704 0.0000 0.0902 0.0000 0.1025
86 1.85 0.0000 0.0832 0.0934 0.0706 0.0000 0.0906 0.0000 0.1028
87 1.86 0.0000 0.0835 0.0936 0.0708 0.0000 0.0910 0.0000 0.1031
88 1.87 0.0000 0.0838 0.0939 0.0709 0.0000 0.0913 0.0000 0.1034
89 1.88 0.0000 0.0842 0.0941 0.0711 0.0000 0.0917 0.0000 0.1036
90 1.89 0.0000 0.0845 0.0944 0.0712 0.0000 0.0920 0.0000 0.1039
91 1.90 0.0000 0.0848 0.0946 0.0714 0.0000 0.0924 0.0000 0.1042
 CODE IS 456
TABLE Table 26
TITLE BM Coefficients for Rectangular Panels supported on four sides with Provision for Torsion at corners
CLAUSE D - 1.1 and 24.4.1

1 12 13 14 15 16 17 18
Short Span Coefficients (ax)
Three Edges Three Edges
Two Long Edges
Discontinuous (One Long Discontinuous (One Short Four Edges Discontinuous
Discontinuous
Edge Continuous) Edge Continuous)
S.No. Values of ( ly / lx ) Negative Negative Negative Negative
Positive Positive Positive Positive
moment at moment at moment at moment at
moment at moment at moment at moment at
continuous continuous continuous continuous
midspan midspan midspan midspan
edge edge edge edge

92 1.91 0.0000 0.0851 0.0948 0.0716 0.0000 0.0928 0.0000 0.1045

93 1.92 0.0000 0.0854 0.0951 0.0717 0.0000 0.0931 0.0000 0.1048
94 1.93 0.0000 0.0858 0.0953 0.0719 0.0000 0.0935 0.0000 0.1050
95 1.94 0.0000 0.0861 0.0956 0.0720 0.0000 0.0938 0.0000 0.1053
96 1.95 0.0000 0.0864 0.0958 0.0722 0.0000 0.0942 0.0000 0.1056
97 1.96 0.0000 0.0867 0.0960 0.0724 0.0000 0.0946 0.0000 0.1059
98 1.97 0.0000 0.0870 0.0963 0.0725 0.0000 0.0949 0.0000 0.1062
99 1.98 0.0000 0.0874 0.0965 0.0727 0.0000 0.0953 0.0000 0.1064
100 1.99 0.0000 0.0877 0.0968 0.0728 0.0000 0.0956 0.0000 0.1067
101 2.00 0.0000 0.0880 0.0970 0.0730 0.0000 0.0960 0.0000 0.1070
 CODE IS 456
TABLE Table 26
TITLE BM Coefficients for Rectangular Panels
CLAUSE D - 1.1 and 24.4.1

1 2

Case.
Type of Panel Moments considered
No.

Negative moment at continuous edge 1

1 Interior Panels
Positive moment at midspan 2

Negative moment at continuous edge 3

One Short Edge
2
Discontinuous
Positive moment at midspan 4

Negative moment at continuous edge 5

One Long Edge
3
Discontinuous
Positive moment at midspan 6

Two Adjacent Negative moment at continuous edge 7

4 Edges
Discontinuous Positive moment at midspan 8

Negative moment at continuous edge 9

Two Short Edges
5
Discontinuous
Positive moment at midspan 10

Negative moment at continuous edge 11

Two Long Edges
6
Discontinuous
Positive moment at midspan 12

Three Edges Negative moment at continuous edge 13

Discontinuous
7
(One Long Edge
Continuous) Positive moment at midspan 14

Three Edges Negative moment at continuous edge 15

Discontinuous
8
(One Short Edge
Continuous) Positive moment at midspan 16

Negative moment at continuous edge 17

Four Edges
9
Discontinuous
Positive moment at midspan 18
for Rectangular Panels

Long Span Coefficients (ay)

0.032

0.024

0.037

0.028

0.037

0.028

0.047

0.035

0.000

0.035

0.045

0.035

0.000

0.043

0.057

0.043

0.000

0.056
STANDARD TITLE: REINFORCEMENT PERCENTAGE, pt FOR FLEXURE MEMBERS
FOR SINGLY REINFORCED SECTIONS
STANDARD NO.:

Tensile Reinforcement percentage equation can be written as,

0.87464 (fy2/fck) (pt/100)2 - 0.87 fy (pt/100) + (Mu/bd2) = 0

Grade of Concrete, fck = 20 N/mm2

Mu / bd2, Grade of Steel, fy in N/mm2

S.No.
N/mm2
250 415 500
1 0.00 0.000 0.000 0.000
2 0.01 0.005 0.003 0.002
3 0.02 0.009 0.006 0.005
4 0.03 0.014 0.008 0.007
5 0.04 0.018 0.011 0.009
6 0.05 0.023 0.014 0.012
7 0.06 0.028 0.017 0.014
8 0.07 0.032 0.019 0.016
9 0.08 0.037 0.022 0.018
10 0.09 0.042 0.025 0.021
11 0.10 0.046 0.028 0.023
12 0.11 0.051 0.031 0.025
13 0.12 0.056 0.033 0.028
14 0.13 0.060 0.036 0.030
15 0.14 0.065 0.039 0.032
16 0.15 0.070 0.042 0.035
17 0.16 0.074 0.045 0.037
18 0.17 0.079 0.048 0.039
19 0.18 0.084 0.050 0.042
20 0.19 0.088 0.053 0.044
21 0.2 0.093 0.056 0.047
22 0.21 0.098 0.059 0.049
23 0.22 0.103 0.062 0.051
24 0.23 0.107 0.065 0.054
25 0.24 0.112 0.067 0.056
26 0.25 0.117 0.070 0.058

calc pt
856451500.xlsx
21 of 46 | DESIGNED BY |
STANDARD TITLE: REINFORCEMENT PERCENTAGE, pt FOR FLEXURE MEMBERS
FOR SINGLY REINFORCED SECTIONS
STANDARD NO.:

27 0.26 0.121 0.073 0.061

28 0.27 0.126 0.076 0.063
29 0.28 0.131 0.079 0.065
30 0.29 0.136 0.082 0.068
31 0.30 0.140 0.085 0.070
32 0.31 0.145 0.087 0.073
33 0.32 0.150 0.090 0.075
34 0.33 0.155 0.093 0.077
35 0.34 0.160 0.096 0.080
36 0.35 0.164 0.099 0.082
37 0.36 0.169 0.102 0.085
38 0.37 0.174 0.105 0.087
39 0.38 0.179 0.108 0.089
40 0.39 0.184 0.111 0.092
41 0.40 0.188 0.114 0.094
42 0.41 0.193 0.116 0.097
43 0.42 0.198 0.119 0.099
44 0.43 0.203 0.122 0.101
45 0.44 0.208 0.125 0.104
46 0.45 0.213 0.128 0.106
47 0.46 0.218 0.131 0.109
48 0.47 0.222 0.134 0.111
49 0.48 0.227 0.137 0.114
50 0.49 0.232 0.140 0.116
51 0.50 0.237 0.143 0.119
52 0.51 0.242 0.146 0.121
53 0.52 0.247 0.149 0.123
54 0.53 0.252 0.152 0.126
55 0.54 0.257 0.155 0.128
56 0.55 0.262 0.158 0.131
57 0.56 0.266 0.161 0.133
58 0.57 0.271 0.163 0.136
59 0.58 0.276 0.166 0.138
60 0.59 0.281 0.169 0.141

calc pt
856451500.xlsx
22 of 46 | DESIGNED BY |
STANDARD TITLE: REINFORCEMENT PERCENTAGE, pt FOR FLEXURE MEMBERS
FOR SINGLY REINFORCED SECTIONS
STANDARD NO.:

61 0.60 0.286 0.172 0.143

62 0.61 0.291 0.175 0.146
63 0.62 0.296 0.178 0.148
64 0.63 0.301 0.181 0.151
65 0.64 0.306 0.184 0.153
66 0.65 0.311 0.187 0.156
67 0.66 0.316 0.190 0.158
68 0.67 0.321 0.193 0.161
69 0.68 0.326 0.196 0.163
70 0.69 0.331 0.199 0.166
71 0.70 0.336 0.202 0.168
72 0.71 0.341 0.206 0.171
73 0.72 0.346 0.209 0.173
74 0.73 0.351 0.212 0.176
75 0.74 0.356 0.215 0.178
76 0.75 0.361 0.218 0.181
77 0.76 0.366 0.221 0.183
78 0.77 0.371 0.224 0.186
79 0.78 0.377 0.227 0.188
80 0.79 0.382 0.230 0.191
81 0.80 0.387 0.233 0.193
82 0.81 0.392 0.236 0.196
83 0.82 0.397 0.239 0.198
84 0.83 0.402 0.242 0.201
85 0.84 0.407 0.245 0.204
86 0.85 0.412 0.248 0.206
87 0.86 0.417 0.251 0.209
88 0.87 0.423 0.255 0.211
89 0.88 0.428 0.258 0.214
90 0.89 0.433 0.261 0.216
91 0.90 0.438 0.264 0.219
92 0.91 0.443 0.267 0.222
93 0.92 0.448 0.270 0.224
94 0.93 0.454 0.273 0.227

calc pt
856451500.xlsx
23 of 46 | DESIGNED BY |
STANDARD TITLE: REINFORCEMENT PERCENTAGE, pt FOR FLEXURE MEMBERS
FOR SINGLY REINFORCED SECTIONS
STANDARD NO.:

95 0.94 0.459 0.276 0.229

96 0.95 0.464 0.279 0.232
97 0.96 0.469 0.283 0.235
98 0.97 0.474 0.286 0.237
99 0.98 0.480 0.289 0.240
100 0.99 0.485 0.292 0.242
101 1.00 0.490 0.295 0.245
102 1.01 0.495 0.298 0.248
103 1.02 0.501 0.302 0.250
104 1.03 0.506 0.305 0.253
105 1.04 0.511 0.308 0.256
106 1.05 0.516 0.311 0.258
107 1.06 0.522 0.314 0.261
108 1.07 0.527 0.317 0.264
109 1.08 0.532 0.321 0.266
110 1.09 0.538 0.324 0.269
111 1.10 0.543 0.327 0.271
112 1.11 0.548 0.330 0.274
113 1.12 0.554 0.334 0.277
114 1.13 0.559 0.337 0.279
115 1.14 0.564 0.340 0.282
116 1.15 0.570 0.343 0.285
117 1.16 0.575 0.346 0.288
118 1.17 0.580 0.350 0.290
119 1.18 0.586 0.353 0.293
120 1.19 0.591 0.356 0.296
121 1.20 0.597 0.359 0.298
122 1.21 0.602 0.363 0.301
123 1.22 0.607 0.366 0.304
124 1.23 0.613 0.369 0.306
125 1.24 0.618 0.372 0.309
126 1.25 0.624 0.376 0.312
127 1.26 0.629 0.379 0.315
128 1.27 0.635 0.382 0.317

calc pt
856451500.xlsx
24 of 46 | DESIGNED BY |
STANDARD TITLE: REINFORCEMENT PERCENTAGE, pt FOR FLEXURE MEMBERS
FOR SINGLY REINFORCED SECTIONS
STANDARD NO.:

129 1.28 0.640 0.386 0.320

130 1.29 0.646 0.389 0.323
131 1.30 0.651 0.392 0.326
132 1.31 0.657 0.396 0.328
133 1.32 0.662 0.399 0.331
134 1.33 0.668 0.402 0.334
135 1.34 0.673 0.406 0.337
136 1.35 0.679 0.409 0.339
137 1.36 0.684 0.412 0.342
138 1.37 0.690 0.416 0.345
139 1.38 0.695 0.419 0.348
140 1.39 0.701 0.422 0.351
141 1.40 0.707 0.426 0.353
142 1.41 0.712 0.429 0.356
143 1.42 0.718 0.432 0.359
144 1.43 0.723 0.436 0.362
145 1.44 0.729 0.439 0.365
146 1.45 0.735 0.443 0.367
147 1.46 0.740 0.446 0.370
148 1.47 0.746 0.449 0.373
149 1.48 0.752 0.453 0.376
150 1.49 0.757 0.456 0.379
151 1.50 0.763 0.460 0.382
152 1.51 0.769 0.463 0.384
153 1.52 0.774 0.467 0.387
154 1.53 0.780 0.470 0.390
155 1.54 0.786 0.473 0.393
156 1.55 0.792 0.477 0.396
157 1.56 0.797 0.480 0.399
158 1.57 0.803 0.484 0.402
159 1.58 0.809 0.487 0.404
160 1.59 0.815 0.491 0.407
161 1.60 0.820 0.494 0.410
162 1.61 0.826 0.498 0.413

calc pt
856451500.xlsx
25 of 46 | DESIGNED BY |
STANDARD TITLE: REINFORCEMENT PERCENTAGE, pt FOR FLEXURE MEMBERS
FOR SINGLY REINFORCED SECTIONS
STANDARD NO.:

163 1.62 0.832 0.501 0.416

164 1.63 0.838 0.505 0.419
165 1.64 0.844 0.508 0.422
166 1.65 0.850 0.512 0.425
167 1.66 0.855 0.515 0.428
168 1.67 0.861 0.519 0.431
169 1.68 0.867 0.522 0.434
170 1.69 0.873 0.526 0.437
171 1.70 0.879 0.529 0.439
172 1.71 0.885 0.533 0.442
173 1.72 0.891 0.537 0.445
174 1.73 0.897 0.540 0.448
175 1.74 0.903 0.544 0.451
176 1.75 0.909 0.547 0.454
177 1.76 0.915 0.551 0.457
178 1.77 0.921 0.555 0.460
179 1.78 0.926 0.558 0.463
180 1.79 0.932 0.562 0.466
181 1.80 0.939 0.565 0.469
182 1.81 0.945 0.569 0.472
183 1.82 0.951 0.573 0.475
184 1.83 0.957 0.576 0.478
185 1.84 0.963 0.580 0.481
186 1.85 0.969 0.584 0.484
187 1.86 0.975 0.587 0.487
188 1.87 0.981 0.591 0.490
189 1.88 0.987 0.595 0.494
190 1.89 0.993 0.598 0.497
191 1.90 0.999 0.602 0.500
192 1.91 1.005 0.606 0.503
193 1.92 1.012 0.609 0.506
194 1.93 1.018 0.613 0.509
195 1.94 1.024 0.617 0.512
196 1.95 1.030 0.621 0.515

calc pt
856451500.xlsx
26 of 46 | DESIGNED BY |
STANDARD TITLE: REINFORCEMENT PERCENTAGE, pt FOR FLEXURE MEMBERS
FOR SINGLY REINFORCED SECTIONS
STANDARD NO.:

197 1.96 1.036 0.624 0.518

198 1.97 1.043 0.628 0.521
199 1.98 1.049 0.632 0.524
200 1.99 1.055 0.636 0.528
201 2.00 1.061 0.639 0.531
202 2.01 1.068 0.643 0.534
203 2.02 1.074 0.647 0.537
204 2.03 1.080 0.651 0.540
205 2.04 1.087 0.655 0.543
206 2.05 1.093 0.658 0.546
207 2.06 1.099 0.662 0.550
208 2.07 1.106 0.666 0.553
209 2.08 1.112 0.670 0.556
210 2.09 1.118 0.674 0.559
211 2.10 1.125 0.678 0.562
212 2.11 1.131 0.681 0.566
213 2.12 1.138 0.685 0.569
214 2.13 1.144 0.689 0.572
215 2.14 1.151 0.693 0.575
216 2.15 1.157 0.697 0.579
217 2.16 1.163 0.701 0.582
218 2.17 1.170 0.705 0.585
219 2.18 1.177 0.709 0.588
220 2.19 1.183 0.713 0.592
221 2.20 1.190 0.717 0.595
222 2.21 1.196 0.721 0.598
223 2.22 1.203 0.725 0.601
224 2.23 1.209 0.729 0.605
225 2.24 1.216 0.733 0.608
226 2.25 1.223 0.737 0.611
227 2.26 1.229 0.741 0.615
228 2.27 1.236 0.745 0.618
229 2.28 1.243 0.749 0.621
230 2.29 1.249 0.753 0.625

calc pt
856451500.xlsx
27 of 46 | DESIGNED BY |
STANDARD TITLE: REINFORCEMENT PERCENTAGE, pt FOR FLEXURE MEMBERS
FOR SINGLY REINFORCED SECTIONS
STANDARD NO.:

231 2.30 1.256 0.757 0.628

232 2.31 1.263 0.761 0.631
233 2.32 1.269 0.765 0.635
234 2.33 1.276 0.769 0.638
235 2.34 1.283 0.773 0.642
236 2.35 1.290 0.777 0.645
237 2.36 1.297 0.781 0.648
238 2.37 1.303 0.785 0.652
239 2.38 1.310 0.789 0.655
240 2.39 1.317 0.793 0.659
241 2.40 1.324 0.798 0.662
242 2.41 1.331 0.802 0.665
243 2.42 1.338 0.806 0.669
244 2.43 1.345 0.810 0.672
245 2.44 1.352 0.814 0.676
246 2.45 1.359 0.819 0.679
247 2.46 1.366 0.823 0.683
248 2.47 1.373 0.827 0.686
249 2.48 1.380 0.831 0.690
250 2.49 1.387 0.835 0.693
251 2.50 1.394 0.840 0.697
252 2.51 1.401 0.844 0.700
253 2.52 1.408 0.848 0.704
254 2.53 1.415 0.853 0.708
255 2.54 1.422 0.857 0.711
256 2.55 1.430 0.861 0.715
257 2.56 1.437 0.865 0.718
258 2.57 1.444 0.870 0.722
259 2.58 1.451 0.874 0.726
260 2.59 1.458 0.879 0.729
261 2.60 1.466 0.883 0.733
262 2.61 1.473 0.887 0.736
263 2.62 1.480 0.892 0.740
264 2.63 1.488 0.896 0.744

calc pt
856451500.xlsx
28 of 46 | DESIGNED BY |
STANDARD TITLE: REINFORCEMENT PERCENTAGE, pt FOR FLEXURE MEMBERS
FOR SINGLY REINFORCED SECTIONS
STANDARD NO.:

265 2.64 1.495 0.901 0.747

266 2.65 1.502 0.905 0.751
267 2.66 1.510 0.909 0.755
268 2.67 1.517 0.914 0.759
269 2.68 1.525 0.918 0.762
270 2.69 1.532 0.923 0.766
271 2.70 1.540 0.927 0.770
272 2.71 1.547 0.932 0.774
273 2.72 1.555 0.937 0.777
274 2.73 1.562 0.941 0.781
275 2.74 1.570 0.946 0.785
276 2.75 1.577 0.950 0.789
277 2.76 1.585 0.955 0.792
278 2.77 1.593 0.959 0.796
279 2.78 1.600 0.964 0.800
280 2.79 1.608 0.969 0.804
281 2.80 1.616 0.973 0.808
282 2.81 1.623 0.978 0.812
283 2.82 1.631 0.983 0.816
284 2.83 1.639 0.987 0.820
285 2.84 1.647 0.992 0.823
286 2.85 1.655 0.997 0.827
287 2.86 1.663 1.002 0.831
288 2.87 1.671 1.006 0.835
289 2.88 1.679 1.011 0.839
290 2.89 1.686 1.016 0.843
291 2.90 1.694 1.021 0.847
292 2.91 1.702 1.026 0.851
293 2.92 1.711 1.030 0.855
294 2.93 1.719 1.035 0.859
295 2.94 1.727 1.040 0.863
296 2.95 1.735 1.045 0.867
297 2.96 1.743 1.050 0.872
298 2.97 1.751 1.055 0.876

calc pt
856451500.xlsx
29 of 46 | DESIGNED BY |
STANDARD TITLE: REINFORCEMENT PERCENTAGE, pt FOR FLEXURE MEMBERS
FOR SINGLY REINFORCED SECTIONS
STANDARD NO.:

299 2.98 1.759 1.060 0.880

300 2.99 1.768 1.065 0.884
301 3.00 1.776 1.070 0.888
302 3.01 1.784 1.075 0.892
303 3.02 1.793 1.080 0.896
304 3.03 1.801 1.085 0.901
305 3.04 1.809 1.090 0.905
306 3.05 1.818 1.095 0.909
307 3.06 1.826 1.100 0.913
308 3.07 1.835 1.105 0.917
309 3.08 1.843 1.111 0.922
310 3.09 1.852 1.116 0.926
311 3.10 1.861 1.121 0.930
312 3.11 1.869 1.126 0.935
313 3.12 1.878 1.131 0.939
314 3.13 1.887 1.137 0.943
315 3.14 1.896 1.142 0.948
316 3.15 1.904 1.147 0.952
317 3.16 1.913 1.153 0.957
318 3.17 1.922 1.158 0.961
319 3.18 1.931 1.163 0.965
320 3.19 1.940 1.169 0.970
321 3.20 1.949 1.174 0.974
322 3.21 1.958 1.179 0.979
323 3.22 1.967 1.185 0.984
324 3.23 1.976 1.190 0.988
325 3.24 1.985 1.196 0.993
326 3.25 1.994 1.201 0.997
327 3.26 2.004 1.207 1.002
328 3.27 2.013 1.213 1.007
329 3.28 2.022 1.218 1.011
330 3.29 2.032 1.224 1.016
331 3.30 2.041 1.230 1.021
332 3.31 2.051 1.235 1.025

calc pt
856451500.xlsx
30 of 46 | DESIGNED BY |
STANDARD TITLE: REINFORCEMENT PERCENTAGE, pt FOR FLEXURE MEMBERS
FOR SINGLY REINFORCED SECTIONS
STANDARD NO.:

333 3.32 2.060 1.241 1.030

334 3.33 2.070 1.247 1.035
335 3.34 2.079 1.253 1.040
336 3.35 2.089 1.258 1.044
337 3.36 2.099 1.264 1.049
338 3.37 2.108 1.270 1.054
339 3.38 2.118 1.276 1.059
340 3.39 2.128 1.282 1.064
341 3.40 2.138 1.288 1.069
342 3.41 2.148 1.294 1.074
343 3.42 2.158 1.300 1.079
344 3.43 2.168 1.306 1.084
345 3.44 2.178 1.312 1.089
346 3.45 2.188 1.318 1.094
347 3.46 2.199 1.324 1.099
348 3.47 2.209 1.331 1.104
349 3.48 2.219 1.337 1.110
350 3.49 2.230 1.343 1.115
351 3.50 2.240 1.349 1.120
352 3.51 2.251 1.356 1.125
353 3.52 2.261 1.362 1.131
354 3.53 2.272 1.369 1.136
355 3.54 2.283 1.375 1.141
356 3.55 2.294 1.382 1.147
357 3.56 2.304 1.388 1.152
358 3.57 2.315 1.395 1.158
359 3.58 2.326 1.401 1.163
360 3.59 2.338 1.408 1.169
361 3.60 2.349 1.415 1.174
362 3.61 2.360 1.422 1.180
363 3.62 2.371 1.429 1.186
364 3.63 2.383 1.435 1.191
365 3.64 2.394 1.442 1.197
366 3.65 2.406 1.449 1.203

calc pt
856451500.xlsx
31 of 46 | DESIGNED BY |
STANDARD TITLE: REINFORCEMENT PERCENTAGE, pt FOR FLEXURE MEMBERS
FOR SINGLY REINFORCED SECTIONS
STANDARD NO.:

367 3.66 2.418 1.456 1.209

368 3.67 2.429 1.463 1.215
369 3.68 2.441 1.471 1.221
370 3.69 2.453 1.478 1.227
371 3.70 2.465 1.485 1.233
372 3.71 2.477 1.492 1.239
373 3.72 2.489 1.500 1.245
374 3.73 2.502 1.507 1.251
375 3.74 2.514 1.515 1.257
376 3.75 2.527 1.522 1.263
377 3.76 2.539 1.530 1.270
378 3.77 2.552 1.537 1.276
379 3.78 2.565 1.545 1.283
380 3.79 2.578 1.553 1.289
381 3.80 2.591 1.561 1.296
382 3.81 2.604 1.569 1.302
383 3.82 2.618 1.577 1.309
384 3.83 2.631 1.585 1.316
385 3.84 2.645 1.593 1.322
386 3.85 2.659 1.602 1.329
387 3.86 2.673 1.610 1.336
388 3.87 2.687 1.619 1.343
389 3.88 2.701 1.627 1.350
390 3.89 2.715 1.636 1.358
391 3.90 2.730 1.645 1.365
392 3.91 2.745 1.653 1.372
393 3.92 2.760 1.662 1.380
394 3.93 2.775 1.671 1.387
395 3.94 2.790 1.681 1.395
396 3.95 2.805 1.690 1.403
397 3.96 2.821 1.699 1.411
398 3.97 2.837 1.709 1.418
399 3.98 2.853 1.719 1.427
400 3.99 2.869 1.729 1.435

calc pt
856451500.xlsx
32 of 46 | DESIGNED BY |
STANDARD TITLE: REINFORCEMENT PERCENTAGE, pt FOR FLEXURE MEMBERS
FOR SINGLY REINFORCED SECTIONS
STANDARD NO.:

401 4.00 2.886 1.739 1.443

402 4.01 2.903 1.749 1.451
403 4.02 2.920 1.759 1.460
404 4.03 2.937 1.770 1.469
405 4.04 2.955 1.780 1.478
406 4.05 2.973 1.791 1.487
407 4.06 2.992 1.802 1.496
408 4.07 3.010 1.813 1.505
409 4.08 3.029 1.825 1.515
410 4.09 3.049 1.837 1.524
411 4.10 3.069 1.849 1.534
412 4.11 3.089 1.861 1.544
413 4.12 3.110 1.873 1.555
414 4.13 3.131 1.886 1.566
415 4.14 3.153 1.899 1.576
416 4.15 3.175 1.913 1.588
417 4.16 3.198 1.927 1.599
418 4.17 3.222 1.941 1.611
419 4.18 3.247 1.956 1.623
420 4.19 3.272 1.971 1.636
421 4.20 3.298 1.987 1.649
422 4.21 3.326 2.004 1.663
423 4.22 3.354 2.021 1.677
424 4.23 3.384 2.039 1.692
425 4.24 3.416 2.058 1.708
426 4.25 3.449 2.078 1.725
427 4.26 3.485 2.099 1.743
428 4.27 3.524 2.123 1.762
429 4.28 3.566 2.148 1.783
430 4.29 3.612 2.176 1.806
431 4.30 3.666 2.209 1.833
432 4.31 3.731 2.248 1.866
433 4.32 3.821 2.302 1.910
434 4.33 Err:502 Err:502 Err:502

calc pt
856451500.xlsx
33 of 46 | DESIGNED BY |
STANDARD TITLE: REINFORCEMENT PERCENTAGE, pt FOR FLEXURE MEMBERS
FOR SINGLY REINFORCED SECTIONS
STANDARD NO.:

435 4.34 Err:502 Err:502 Err:502

436 4.35 Err:502 Err:502 Err:502
437 4.36 Err:502 Err:502 Err:502
438 4.37 Err:502 Err:502 Err:502
439 4.38 Err:502 Err:502 Err:502
440 4.39 Err:502 Err:502 Err:502
441 4.40 Err:502 Err:502 Err:502
442 4.41 Err:502 Err:502 Err:502
443 4.42 Err:502 Err:502 Err:502
444 4.43 Err:502 Err:502 Err:502
445 4.44 Err:502 Err:502 Err:502
446 4.45 Err:502 Err:502 Err:502
447 4.46 Err:502 Err:502 Err:502
448 4.47 Err:502 Err:502 Err:502
449 4.48 Err:502 Err:502 Err:502
450 4.49 Err:502 Err:502 Err:502
451 4.50 Err:502 Err:502 Err:502
452 4.51 Err:502 Err:502 Err:502
453 4.52 Err:502 Err:502 Err:502
454 4.53 Err:502 Err:502 Err:502
455 4.54 Err:502 Err:502 Err:502
456 4.55 Err:502 Err:502 Err:502
457 4.56 Err:502 Err:502 Err:502
458 4.57 Err:502 Err:502 Err:502
459 4.58 Err:502 Err:502 Err:502
460 4.59 Err:502 Err:502 Err:502
461 4.60 Err:502 Err:502 Err:502
462 4.61 Err:502 Err:502 Err:502
463 4.62 Err:502 Err:502 Err:502
464 4.63 Err:502 Err:502 Err:502
465 4.64 Err:502 Err:502 Err:502
466 4.65 Err:502 Err:502 Err:502
467 4.66 Err:502 Err:502 Err:502
468 4.67 Err:502 Err:502 Err:502

calc pt
856451500.xlsx
34 of 46 | DESIGNED BY |
STANDARD TITLE: REINFORCEMENT PERCENTAGE, pt FOR FLEXURE MEMBERS
FOR SINGLY REINFORCED SECTIONS
STANDARD NO.:

469 4.68 Err:502 Err:502 Err:502

470 4.69 Err:502 Err:502 Err:502
471 4.70 Err:502 Err:502 Err:502
472 4.71 Err:502 Err:502 Err:502
473 4.72 Err:502 Err:502 Err:502
474 4.73 Err:502 Err:502 Err:502
475 4.74 Err:502 Err:502 Err:502
476 4.75 Err:502 Err:502 Err:502
477 4.76 Err:502 Err:502 Err:502
478 4.77 Err:502 Err:502 Err:502
479 4.78 Err:502 Err:502 Err:502
480 4.79 Err:502 Err:502 Err:502
481 4.80 Err:502 Err:502 Err:502
482 4.81 Err:502 Err:502 Err:502
483 4.82 Err:502 Err:502 Err:502
484 4.83 Err:502 Err:502 Err:502
485 4.84 Err:502 Err:502 Err:502
486 4.85 Err:502 Err:502 Err:502
487 4.86 Err:502 Err:502 Err:502
488 4.87 Err:502 Err:502 Err:502
489 4.88 Err:502 Err:502 Err:502
490 4.89 Err:502 Err:502 Err:502
491 4.90 Err:502 Err:502 Err:502
492 4.91 Err:502 Err:502 Err:502
493 4.92 Err:502 Err:502 Err:502
494 4.93 Err:502 Err:502 Err:502
495 4.94 Err:502 Err:502 Err:502
496 4.95 Err:502 Err:502 Err:502
497 4.96 Err:502 Err:502 Err:502
498 4.97 Err:502 Err:502 Err:502
499 4.98 Err:502 Err:502 Err:502
500 4.99 Err:502 Err:502 Err:502
501 5.00 Err:502 Err:502 Err:502
502 5.01 Err:502 Err:502 Err:502

calc pt
856451500.xlsx
35 of 46 | DESIGNED BY |
STANDARD TITLE: REINFORCEMENT PERCENTAGE, pt FOR FLEXURE MEMBERS
FOR SINGLY REINFORCED SECTIONS
STANDARD NO.:

503 5.02 Err:502 Err:502 Err:502

504 5.03 Err:502 Err:502 Err:502
505 5.04 Err:502 Err:502 Err:502
506 5.05 Err:502 Err:502 Err:502
507 5.06 Err:502 Err:502 Err:502
508 5.07 Err:502 Err:502 Err:502
509 5.08 Err:502 Err:502 Err:502
510 5.09 Err:502 Err:502 Err:502
511 5.10 Err:502 Err:502 Err:502
512 5.11 Err:502 Err:502 Err:502
513 5.12 Err:502 Err:502 Err:502
514 5.13 Err:502 Err:502 Err:502
515 5.14 Err:502 Err:502 Err:502
516 5.15 Err:502 Err:502 Err:502
517 5.16 Err:502 Err:502 Err:502
518 5.17 Err:502 Err:502 Err:502
519 5.18 Err:502 Err:502 Err:502
520 5.19 Err:502 Err:502 Err:502
521 5.20 Err:502 Err:502 Err:502
522 5.21 Err:502 Err:502 Err:502
523 5.22 Err:502 Err:502 Err:502
524 5.23 Err:502 Err:502 Err:502
525 5.24 Err:502 Err:502 Err:502
526 5.25 Err:502 Err:502 Err:502
527 5.26 Err:502 Err:502 Err:502
528 5.27 Err:502 Err:502 Err:502
529 5.28 Err:502 Err:502 Err:502
530 5.29 Err:502 Err:502 Err:502
531 5.30 Err:502 Err:502 Err:502
532 5.31 Err:502 Err:502 Err:502
533 5.32 Err:502 Err:502 Err:502
534 5.33 Err:502 Err:502 Err:502
535 5.34 Err:502 Err:502 Err:502
536 5.35 Err:502 Err:502 Err:502

calc pt
856451500.xlsx
36 of 46 | DESIGNED BY |
STANDARD TITLE: REINFORCEMENT PERCENTAGE, pt FOR FLEXURE MEMBERS
FOR SINGLY REINFORCED SECTIONS
STANDARD NO.:

537 5.36 Err:502 Err:502 Err:502

538 5.37 Err:502 Err:502 Err:502
539 5.38 Err:502 Err:502 Err:502
540 5.39 Err:502 Err:502 Err:502
541 5.40 Err:502 Err:502 Err:502
542 5.41 Err:502 Err:502 Err:502
543 5.42 Err:502 Err:502 Err:502
544 5.43 Err:502 Err:502 Err:502
545 5.44 Err:502 Err:502 Err:502
546 5.45 Err:502 Err:502 Err:502
547 5.46 Err:502 Err:502 Err:502
548 5.47 Err:502 Err:502 Err:502
549 5.48 Err:502 Err:502 Err:502
550 5.49 Err:502 Err:502 Err:502
551 5.50 Err:502 Err:502 Err:502
552 5.51 Err:502 Err:502 Err:502
553 5.52 Err:502 Err:502 Err:502
554 5.53 Err:502 Err:502 Err:502
555 5.54 Err:502 Err:502 Err:502
556 5.55 Err:502 Err:502 Err:502
557 5.56 Err:502 Err:502 Err:502
558 5.57 Err:502 Err:502 Err:502
559 5.58 Err:502 Err:502 Err:502
560 5.59 Err:502 Err:502 Err:502
561 5.60 Err:502 Err:502 Err:502
562 5.61 Err:502 Err:502 Err:502
563 5.62 Err:502 Err:502 Err:502
564 5.63 Err:502 Err:502 Err:502
565 5.64 Err:502 Err:502 Err:502
566 5.65 Err:502 Err:502 Err:502
567 5.66 Err:502 Err:502 Err:502
568 5.67 Err:502 Err:502 Err:502
569 5.68 Err:502 Err:502 Err:502
570 5.69 Err:502 Err:502 Err:502

calc pt
856451500.xlsx
37 of 46 | DESIGNED BY |
STANDARD TITLE: REINFORCEMENT PERCENTAGE, pt FOR FLEXURE MEMBERS
FOR SINGLY REINFORCED SECTIONS
STANDARD NO.:

571 5.70 Err:502 Err:502 Err:502

572 5.71 Err:502 Err:502 Err:502
573 5.72 Err:502 Err:502 Err:502
574 5.73 Err:502 Err:502 Err:502
575 5.74 Err:502 Err:502 Err:502
576 5.75 Err:502 Err:502 Err:502
577 5.76 Err:502 Err:502 Err:502
578 5.77 Err:502 Err:502 Err:502
579 5.78 Err:502 Err:502 Err:502
580 5.79 Err:502 Err:502 Err:502
581 5.80 Err:502 Err:502 Err:502
582 5.81 Err:502 Err:502 Err:502
583 5.82 Err:502 Err:502 Err:502
584 5.83 Err:502 Err:502 Err:502
585 5.84 Err:502 Err:502 Err:502
586 5.85 Err:502 Err:502 Err:502
587 5.86 Err:502 Err:502 Err:502
588 5.87 Err:502 Err:502 Err:502
589 5.88 Err:502 Err:502 Err:502
590 5.89 Err:502 Err:502 Err:502
591 5.90 Err:502 Err:502 Err:502
592 5.91 Err:502 Err:502 Err:502
593 5.92 Err:502 Err:502 Err:502
594 5.93 Err:502 Err:502 Err:502
595 5.94 Err:502 Err:502 Err:502
596 5.95 Err:502 Err:502 Err:502
597 5.96 Err:502 Err:502 Err:502
598 5.97 Err:502 Err:502 Err:502
599 5.98 Err:502 Err:502 Err:502
600 5.99 Err:502 Err:502 Err:502
601 6.00 Err:502 Err:502 Err:502
602 6.01 Err:502 Err:502 Err:502
603 6.02 Err:502 Err:502 Err:502
604 6.03 Err:502 Err:502 Err:502

calc pt
856451500.xlsx
38 of 46 | DESIGNED BY |
STANDARD TITLE: REINFORCEMENT PERCENTAGE, pt FOR FLEXURE MEMBERS
FOR SINGLY REINFORCED SECTIONS
STANDARD NO.:

605 6.04 Err:502 Err:502 Err:502

606 6.05 Err:502 Err:502 Err:502
607 6.06 Err:502 Err:502 Err:502
608 6.07 Err:502 Err:502 Err:502
609 6.08 Err:502 Err:502 Err:502
610 6.09 Err:502 Err:502 Err:502
611 6.10 Err:502 Err:502 Err:502
612 6.11 Err:502 Err:502 Err:502
613 6.12 Err:502 Err:502 Err:502
614 6.13 Err:502 Err:502 Err:502
615 6.14 Err:502 Err:502 Err:502
616 6.15 Err:502 Err:502 Err:502
617 6.16 Err:502 Err:502 Err:502
618 6.17 Err:502 Err:502 Err:502
619 6.18 Err:502 Err:502 Err:502
620 6.19 Err:502 Err:502 Err:502
621 6.20 Err:502 Err:502 Err:502
622 6.21 Err:502 Err:502 Err:502
623 6.22 Err:502 Err:502 Err:502
624 6.23 Err:502 Err:502 Err:502
625 6.24 Err:502 Err:502 Err:502
626 6.25 Err:502 Err:502 Err:502
627 6.26 Err:502 Err:502 Err:502
628 6.27 Err:502 Err:502 Err:502
629 6.28 Err:502 Err:502 Err:502
630 6.29 Err:502 Err:502 Err:502
631 6.30 Err:502 Err:502 Err:502
632 6.31 Err:502 Err:502 Err:502
633 6.32 Err:502 Err:502 Err:502
634 6.33 Err:502 Err:502 Err:502
635 6.34 Err:502 Err:502 Err:502
636 6.35 Err:502 Err:502 Err:502
637 6.36 Err:502 Err:502 Err:502
638 6.37 Err:502 Err:502 Err:502

calc pt
856451500.xlsx
39 of 46 | DESIGNED BY |
STANDARD TITLE: REINFORCEMENT PERCENTAGE, pt FOR FLEXURE MEMBERS
FOR SINGLY REINFORCED SECTIONS
STANDARD NO.:

639 6.38 Err:502 Err:502 Err:502

640 6.39 Err:502 Err:502 Err:502
641 6.40 Err:502 Err:502 Err:502
642 6.41 Err:502 Err:502 Err:502
643 6.42 Err:502 Err:502 Err:502
644 6.43 Err:502 Err:502 Err:502
645 6.44 Err:502 Err:502 Err:502
646 6.45 Err:502 Err:502 Err:502
647 6.46 Err:502 Err:502 Err:502
648 6.47 Err:502 Err:502 Err:502
649 6.48 Err:502 Err:502 Err:502
650 6.49 Err:502 Err:502 Err:502
651 6.50 Err:502 Err:502 Err:502
652 6.51 Err:502 Err:502 Err:502
653 6.52 Err:502 Err:502 Err:502
654 6.53 Err:502 Err:502 Err:502
655 6.54 Err:502 Err:502 Err:502
656 6.55 Err:502 Err:502 Err:502
657 6.56 Err:502 Err:502 Err:502
658 6.57 Err:502 Err:502 Err:502
659 6.58 Err:502 Err:502 Err:502
660 6.59 Err:502 Err:502 Err:502
661 6.60 Err:502 Err:502 Err:502
662 6.61 Err:502 Err:502 Err:502
663 6.62 Err:502 Err:502 Err:502
664 6.63 Err:502 Err:502 Err:502
665 6.64 Err:502 Err:502 Err:502
666 6.65 Err:502 Err:502 Err:502
667 6.66 Err:502 Err:502 Err:502
668 6.67 Err:502 Err:502 Err:502
669 6.68 Err:502 Err:502 Err:502
670 6.69 Err:502 Err:502 Err:502
671 6.70 Err:502 Err:502 Err:502
672 6.71 Err:502 Err:502 Err:502

calc pt
856451500.xlsx
40 of 46 | DESIGNED BY |
STANDARD TITLE: REINFORCEMENT PERCENTAGE, pt FOR FLEXURE MEMBERS
FOR SINGLY REINFORCED SECTIONS
STANDARD NO.:

673 6.72 Err:502 Err:502 Err:502

674 6.73 Err:502 Err:502 Err:502
675 6.74 Err:502 Err:502 Err:502
676 6.75 Err:502 Err:502 Err:502
677 6.76 Err:502 Err:502 Err:502
678 6.77 Err:502 Err:502 Err:502
679 6.78 Err:502 Err:502 Err:502
680 6.79 Err:502 Err:502 Err:502
681 6.80 Err:502 Err:502 Err:502
682 6.81 Err:502 Err:502 Err:502
683 6.82 Err:502 Err:502 Err:502
684 6.83 Err:502 Err:502 Err:502
685 6.84 Err:502 Err:502 Err:502
686 6.85 Err:502 Err:502 Err:502
687 6.86 Err:502 Err:502 Err:502
688 6.87 Err:502 Err:502 Err:502
689 6.88 Err:502 Err:502 Err:502
690 6.89 Err:502 Err:502 Err:502
691 6.90 Err:502 Err:502 Err:502
692 6.91 Err:502 Err:502 Err:502
693 6.92 Err:502 Err:502 Err:502
694 6.93 Err:502 Err:502 Err:502
695 6.94 Err:502 Err:502 Err:502
696 6.95 Err:502 Err:502 Err:502
697 6.96 Err:502 Err:502 Err:502
698 6.97 Err:502 Err:502 Err:502
699 6.98 Err:502 Err:502 Err:502
700 6.99 Err:502 Err:502 Err:502
701 7.00 Err:502 Err:502 Err:502
702 7.01 Err:502 Err:502 Err:502
703 7.02 Err:502 Err:502 Err:502
704 7.03 Err:502 Err:502 Err:502
705 7.04 Err:502 Err:502 Err:502
706 7.05 Err:502 Err:502 Err:502

calc pt
856451500.xlsx
41 of 46 | DESIGNED BY |
STANDARD TITLE: REINFORCEMENT PERCENTAGE, pt FOR FLEXURE MEMBERS
FOR SINGLY REINFORCED SECTIONS
STANDARD NO.:

707 7.06 Err:502 Err:502 Err:502

708 7.07 Err:502 Err:502 Err:502
709 7.08 Err:502 Err:502 Err:502
710 7.09 Err:502 Err:502 Err:502
711 7.10 Err:502 Err:502 Err:502
712 7.11 Err:502 Err:502 Err:502
713 7.12 Err:502 Err:502 Err:502
714 7.13 Err:502 Err:502 Err:502
715 7.14 Err:502 Err:502 Err:502
716 7.15 Err:502 Err:502 Err:502
717 7.16 Err:502 Err:502 Err:502
718 7.17 Err:502 Err:502 Err:502
719 7.18 Err:502 Err:502 Err:502
720 7.19 Err:502 Err:502 Err:502
721 7.20 Err:502 Err:502 Err:502
722 7.21 Err:502 Err:502 Err:502
723 7.22 Err:502 Err:502 Err:502
724 7.23 Err:502 Err:502 Err:502
725 7.24 Err:502 Err:502 Err:502
726 7.25 Err:502 Err:502 Err:502
727 7.26 Err:502 Err:502 Err:502
728 7.27 Err:502 Err:502 Err:502
729 7.28 Err:502 Err:502 Err:502
730 7.29 Err:502 Err:502 Err:502
731 7.30 Err:502 Err:502 Err:502
732 7.31 Err:502 Err:502 Err:502
733 7.32 Err:502 Err:502 Err:502
734 7.33 Err:502 Err:502 Err:502
735 7.34 Err:502 Err:502 Err:502
736 7.35 Err:502 Err:502 Err:502
737 7.36 Err:502 Err:502 Err:502
738 7.37 Err:502 Err:502 Err:502
739 7.38 Err:502 Err:502 Err:502
740 7.39 Err:502 Err:502 Err:502

calc pt
856451500.xlsx
42 of 46 | DESIGNED BY |
STANDARD TITLE: REINFORCEMENT PERCENTAGE, pt FOR FLEXURE MEMBERS
FOR SINGLY REINFORCED SECTIONS
STANDARD NO.:

741 7.40 Err:502 Err:502 Err:502

742 7.41 Err:502 Err:502 Err:502
743 7.42 Err:502 Err:502 Err:502
744 7.43 Err:502 Err:502 Err:502
745 7.44 Err:502 Err:502 Err:502
746 7.45 Err:502 Err:502 Err:502
747 7.46 Err:502 Err:502 Err:502
748 7.47 Err:502 Err:502 Err:502
749 7.48 Err:502 Err:502 Err:502
750 7.49 Err:502 Err:502 Err:502
751 7.50 Err:502 Err:502 Err:502
752 7.51 Err:502 Err:502 Err:502
753 7.52 Err:502 Err:502 Err:502
754 7.53 Err:502 Err:502 Err:502
755 7.54 Err:502 Err:502 Err:502
756 7.55 Err:502 Err:502 Err:502
757 7.56 Err:502 Err:502 Err:502
758 7.57 Err:502 Err:502 Err:502
759 7.58 Err:502 Err:502 Err:502
760 7.59 Err:502 Err:502 Err:502
761 7.60 Err:502 Err:502 Err:502
762 7.61 Err:502 Err:502 Err:502
763 7.62 Err:502 Err:502 Err:502
764 7.63 Err:502 Err:502 Err:502
765 7.64 Err:502 Err:502 Err:502
766 7.65 Err:502 Err:502 Err:502
767 7.66 Err:502 Err:502 Err:502
768 7.67 Err:502 Err:502 Err:502
769 7.68 Err:502 Err:502 Err:502
770 7.69 Err:502 Err:502 Err:502
771 7.70 Err:502 Err:502 Err:502
772 7.71 Err:502 Err:502 Err:502
773 7.72 Err:502 Err:502 Err:502
774 7.73 Err:502 Err:502 Err:502

calc pt
856451500.xlsx
43 of 46 | DESIGNED BY |
STANDARD TITLE: REINFORCEMENT PERCENTAGE, pt FOR FLEXURE MEMBERS
FOR SINGLY REINFORCED SECTIONS
STANDARD NO.:

775 7.74 Err:502 Err:502 Err:502

776 7.75 Err:502 Err:502 Err:502
777 7.76 Err:502 Err:502 Err:502
778 7.77 Err:502 Err:502 Err:502
779 7.78 Err:502 Err:502 Err:502
780 7.79 Err:502 Err:502 Err:502
781 7.80 Err:502 Err:502 Err:502
782 7.81 Err:502 Err:502 Err:502
783 7.82 Err:502 Err:502 Err:502
784 7.83 Err:502 Err:502 Err:502
785 7.84 Err:502 Err:502 Err:502
786 7.85 Err:502 Err:502 Err:502
787 7.86 Err:502 Err:502 Err:502
788 7.87 Err:502 Err:502 Err:502
789 7.88 Err:502 Err:502 Err:502
790 7.89 Err:502 Err:502 Err:502
791 7.90 Err:502 Err:502 Err:502
792 7.91 Err:502 Err:502 Err:502
793 7.92 Err:502 Err:502 Err:502
794 7.93 Err:502 Err:502 Err:502
795 7.94 Err:502 Err:502 Err:502
796 7.95 Err:502 Err:502 Err:502
797 7.96 Err:502 Err:502 Err:502
798 7.97 Err:502 Err:502 Err:502
799 7.98 Err:502 Err:502 Err:502
800 7.99 Err:502 Err:502 Err:502
801 8.00 Err:502 Err:502 Err:502
802 8.01 Err:502 Err:502 Err:502
803 8.02 Err:502 Err:502 Err:502
804 8.03 Err:502 Err:502 Err:502
805 8.04 Err:502 Err:502 Err:502
806 8.05 Err:502 Err:502 Err:502
807 8.06 Err:502 Err:502 Err:502
808 8.07 Err:502 Err:502 Err:502

calc pt
856451500.xlsx
44 of 46 | DESIGNED BY |
STANDARD TITLE: REINFORCEMENT PERCENTAGE, pt FOR FLEXURE MEMBERS
FOR SINGLY REINFORCED SECTIONS
STANDARD NO.:

809 8.08 Err:502 Err:502 Err:502

810 8.09 Err:502 Err:502 Err:502
811 8.10 Err:502 Err:502 Err:502
812 8.11 Err:502 Err:502 Err:502
813 8.12 Err:502 Err:502 Err:502
814 8.13 Err:502 Err:502 Err:502
815 8.14 Err:502 Err:502 Err:502
816 8.15 Err:502 Err:502 Err:502
817 8.16 Err:502 Err:502 Err:502
818 8.17 Err:502 Err:502 Err:502
819 8.18 Err:502 Err:502 Err:502

calc pt
856451500.xlsx
45 of 46 | DESIGNED BY |
calc pt
856451500.xlsx
46 of 46 | DESIGNED BY |