USB Flash Memory

TransMemory

U2H-512MT U2H-001GT U2H-002GT U2H-004GT

U3 Launchpad Updater Installation Manual for U2H model USB Flash Memory
Semiconductor Company, Toshiba Corporation

U3 Launchpad Updater Installation Manual for U2H model USB Flash Memory

Table of Contents
Chapter 1 Getting started ................................................................................. 2 Chapter 2 System requirements....................................................................... 3 Chapter 3 Installing the Updater....................................................................... 4 1. Installing the Updater....................................................................... 4 1.1. Installing the Updater with Security disabled .......................... 4 1.2. Installing the Updater with Security enabled......................... 11 Chapter 4 Launchpad Tour instructions after installing Updater..................... 20 1. Launchpad Tour instructions.......................................................... 20 1.1. Launchpad Tour instructions on Windows Vista ............... 20 1.2. Launchpad Tour instructions on Windows 2000/XP .......... 22

U3 Launchpad Updater Installation Manual for U2H model USB Flash Memory

Chapter 1 Getting started

Thank you for purchasing USB Flash Memory (TransMemory). This product has the following features. This USB Flash Memory uses Toshiba NAND Flash Memory technology. It can be used in a PC as a removable disk. It is powered by a USB port bus, so no AC adapter is required.

* With the exception of use for ones personal enjoyment and the like, according to the Copyright Law of Japan, content that you record cannot be used without permission from the holder of the appropriate rights. * While writing data to or reading data from TransMemory do not shake or subject to impact, turn off power or remove TransMemory from the device. Doing so may cause failure of TransMemory or the device that is connected to, or the destruction or loss of data stored in TransMemory. This manual provides a brief description of how to install and use the Updater. To ensure proper usage, please read it carefully before using this product.

Trademarks
Windows is a registered trademark of Microsoft Corporation in the United States and other countries. Macintosh and MacOS are trademarks of Apple Computer, Inc. The USB logo is a trademark. Other company and product names may be trademarks or registered trademarks of their respective companies.

U3 Launchpad Updater Installation Manual for U2H model USB Flash Memory

Chapter 2 System requirements

This product requires the following hardware and software in order to function properly. Hardware compatibility PC with a USB port that conforms to USB specifications (Operation not guaranteed with homemade or remodeled PCs) Operating system compatibility Microsoft Windows 2000 Professional Service Pack 4 or higher Microsoft Windows XP Professional Microsoft Windows XP Home Edition Microsoft Windows Vista Ultimate Microsoft Windows Vista Enterprise Microsoft Windows Vista Business Microsoft Windows Vista Home Premium Microsoft Windows Vista Home Basic

U3 Launchpad Updater Installation Manual for U2H model USB Flash Memory

Chapter 3 Installing the Updater

This chapter describes how to install the Updater in order to use this product on Windows Vista. Install the Updater correctly by following the instructions below.

1. Installing the Updater

Make sure to connect this product to your PC before installing the Updater. Exit all other applications.

1.1. Installing the Updater with Security disabled

1) 2) 3) 4) Start up Windows. Access the webpage for downloading the Updater. Double-click the appropriate file Click "Save" in the dialog box.

U3 Launchpad Updater Installation Manual for U2H model USB Flash Memory

5) When the Save As dialog box appears, select "Desktop".

6) The following dialog box will appear when the download is completed. Click "Close".

U3 Launchpad Updater Installation Manual for U2H model USB Flash Memory

7) You will find the new executable file that you downloaded, named "U3updater_toshiba_U2H_Ver1.055.exe", saved to your Desktop. Double-click this file's icon.

8) The driver installation program will start. The following dialog box will appear, and then disappear automatically.

U3 Launchpad Updater Installation Manual for U2H model USB Flash Memory

When the next dialog box appears, select "Accept" and click "Next".

When the next dialog box appears, click "Next".

U3 Launchpad Updater Installation Manual for U2H model USB Flash Memory

When the next dialog box appears, enter a password in the "Password" and "Retype password" fields.

Click "Next".

U3 Launchpad Updater Installation Manual for U2H model USB Flash Memory

The following dialog box will appear, and then disappear automatically.

A backup file will be created in a predefined folder.

U3 Launchpad Updater Installation Manual for U2H model USB Flash Memory

9) When the following dialog box appears, click "Done". This completes the installation of the TransMemory Updater.

* Re-insert your TransMemory into your PC's USB port. This completes the installation of the TransMemory Updater. Once the Updater is installed, it can be used simply by connecting your TransMemory to your PC's USB port. Once installation is completed, you may delete the TransMemory executable file downloaded in Step 7, named "U3updater_toshiba_U2H_Ver1.055.exe".

10

U3 Launchpad Updater Installation Manual for U2H model USB Flash Memory

Once installation is completed, you may also delete the backup file created in Step 8.

1.2. Installing the Updater with Security enabled

1) 2) 3) 4) Start up Windows. Access the webpage for downloading the Updater. Double-click the appropriate file. Click "Save" in the dialog box.

11

U3 Launchpad Updater Installation Manual for U2H model USB Flash Memory

5) When the Save As dialog box appears, select "Desktop".

6) The following dialog box will appear when the download is completed. Click "Close".

12

U3 Launchpad Updater Installation Manual for U2H model USB Flash Memory

7) You will find the new executable file that you downloaded, named "U3updater_toshiba_U2H_Ver1.055.exe", saved to your Desktop. Double-click this file's icon.

8) The driver installation program will start. The following dialog box will appear, and then disappear automatically.

13

U3 Launchpad Updater Installation Manual for U2H model USB Flash Memory

When the next dialog box appears, select "Accept" and click "Next".

When the next dialog box appears, click "Next".

14

U3 Launchpad Updater Installation Manual for U2H model USB Flash Memory

When the next dialog box appears, enter your password in the "Password" field.

Click "Next".

15

U3 Launchpad Updater Installation Manual for U2H model USB Flash Memory

When the next dialog box appears, enter a password in the "Password" and "Retype password" fields.

Click "Next".

16

U3 Launchpad Updater Installation Manual for U2H model USB Flash Memory

The following dialog box will appear, and then disappear automatically.

A backup file will be created in a predefined folder.

17

U3 Launchpad Updater Installation Manual for U2H model USB Flash Memory

9) When the following dialog box appears, click "Done". This completes the installation of the TransMemory Updater.

* Re-insert your TransMemory into your PC's USB port. This completes the installation of the TransMemory Updater. Once the Updater is installed, it can be used simply by connecting your TransMemory to your PC's USB port. Once installation is completed, you may delete the TransMemory executable file downloaded in Step 7, named "U3updater_toshiba_U2H_Ver1.055.exe".

18

U3 Launchpad Updater Installation Manual for U2H model USB Flash Memory

Once installation is completed, you may also delete the backup file created in Step 8.

19

U3 Launchpad Updater Installation Manual for U2H model USB Flash Memory

Chapter 4

Launchpad Tour instructions after installing Updater

This chapter describes instructions regarding the Launchpad Tour program after installing the U3 Launchpad Updater. Perform the procedure correctly by following the instructions below.

1. Launchpad Tour instructions

1.1. Launchpad Tour instructions on Windows Vista
The current Launchpad Tour does not support Windows Vista. We recommend that you delete "AutoRun" in Launchpad Tour after performing an update. A version of Launchpad Tour that supports Windows Vista is scheduled for release in the summer of 2007. 1) Start Launchpad.

20

U3 Launchpad Updater Installation Manual for U2H model USB Flash Memory

2) Right-click on "Launchpad Tour" and select "Properties".

3) When the next dialog box appears, click "Remove Program".

21

U3 Launchpad Updater Installation Manual for U2H model USB Flash Memory

4) Then click "Yes" in the following dialog box.

Launchpad Tour has now been removed.

1.2. Launchpad Tour instructions on Windows 2000/XP

Launchpad Tour supports Windows 2000/XP. We recommend that you disable the "AutoRun" in Launchpad Tour after performing an update. 1) Start Launchpad.

22

U3 Launchpad Updater Installation Manual for U2H model USB Flash Memory

2) Right-click on "Launchpad Tour" and select "Properties".

3) When the next dialog box appears, uncheck "Start on Insertion".

23

U3 Launchpad Updater Installation Manual for U2H model USB Flash Memory

4) Click "Close". Launchpad Tour's "Start on Insertion" option is now disabled.

End of document

24