Scribd
Upload
7 views4 pages

E14F15P11

The document details the specifications of a Single Quadplexer designed for 700-800//900//1800//2100-2600 MHz frequencies, featuring DC Smart Bypass and 4.3-10 connectors for enhanced PIM performance. It is suitable for network modernization and includes various electrical and mechanical specifications, such as insertion loss, return loss, and environmental conditions. The product is classified as a quadplexer and is built to withstand harsh conditions with an IP67 ingress protection rating.

Uploaded by

Zero
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
7 views4 pages

E14F15P11

The document details the specifications of a Single Quadplexer designed for 700-800//900//1800//2100-2600 MHz frequencies, featuring DC Smart Bypass and 4.3-10 connectors for enhanced PIM performance. It is suitable for network modernization and includes various electrical and mechanical specifications, such as insertion loss, return loss, and environmental conditions. The product is classified as a quadplexer and is built to withstand harsh conditions with an IP67 ingress protection rating.

Uploaded by

Zero
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

E14F15P11

Single Quadplexer 700-800//900//1800//2100-2600 MHz, (DC Smart


Bypass), with 4.3-10 connectors
l Industry leading PIM performance

l Designed for network modernization application, introduction of LTE700 and LTE800 on existing site

l New 4.3
4.3--10 connectors for improved PIM performance and size reduction

l Suitable for feeders cables reduction

l DC/AISG SMART bypass functionality

General Specifications
Product Family CBC791826
Modularity 1-Single
Includes Mounting hardware

Electrical Specifications
Sub-module 1|2 1|2 1|2 1|2
Branch 1 2 3 4
Port Designation DD2
DD2--800 900 1800 21
21--23
23--26
APT 700 IMT 2100
License Band CEL 900 DCS 1800
EDD 800 IMT 2600

Electrical Specifications, Band Pass


1920
1920––2170 MHz
Frequency Range 694
694––862 MHz 880
880––960 MHz 1710
1710––1880 MHz
2300
2300––2690 MHz
Insertion Loss, typical 0.30 dB 0.30 dB 0.25 dB 0.25 dB
Return Loss, typical 22 dB 22 dB 22 dB 22 dB
Isolation, minimum 50 dB 50 dB 50 dB 50 dB
Input Power, RMS, maximum 300 W 300 W 300 W 300 W
Input Power, PEP, maximum 3000 W 3000 W 3000 W 3000 W
3rd Order PIM, typical -160 dBc -160 dBc -160 dBc -160 dBc
3rd Order PIM Test Method Two +43 dBm carriers Two +43 dBm carriers Two +43 dBm carriers Two +43 dBm carriers

Product Classification
Product Type Quadplexer

AISG Electrical Specifications


AISG Carrier 2176 KHz ± 100 ppm
Insertion Loss, maximum 0.50 dB
Return Loss, minimum 10 dB

dc Power/Alarm Electrical Specifications


page 1 of 4
January 30, 2019

©2019 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope.All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: December 11, 2018
E14F15P11

dc/AISG Pass-through Method Auto sensing


dc/AISG Pass-through Path See logic table
dc/AISG Pass-through, combiner dc Sensing
Lightning Surge Current 5 kA
Lightning Surge Current Waveform 8/20 waveform

Electrical Specifications
Impedance 50 ohm

Block Diagram

page 2 of 4
January 30, 2019

©2019 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope.All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: December 11, 2018
E14F15P11

Logic Table

Mechanical Specifications
RF Connector Interface 4.3-10 Female
RF Connector Interface Body Style Medium neck
Color Gray
Mount Type Pole | Wall
Mounting Pipe Diameter 42.6–122 mm
Mounting Pipe Hardware Band clamps (2)
Wind Speed, maximum 60 m/s

Dimensions
Height 263.0 mm | 10.4 in

page 3 of 4
January 30, 2019

©2019 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope.All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: December 11, 2018
E14F15P11

Width 328.0 mm | 12.9 in


Depth 64.0 mm | 2.5 in
Volume 5.5 L
Weight 6.6 kg | 14.6 lb
Weight, without mounting hardware 5.2 kg | 11.5 lb

Environmental Specifications
Operating Temperature -40 °C to +65 °C (-40 °F to +149 °F)
Relative Humidity 15%–100%
Ingress Protection Test Method IEC 60529:2001, IP67
Vibration Test Method IEC 60068-2-6

page 4 of 4
January 30, 2019

©2019 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope.All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: December 11, 2018

You might also like