MATERIAL DATA SHEET / MATERIAL-DATENBLATT

old / alt
Material code
Material-Code J9515 ( J9515 )

Additional codes 4J1,4J1X,J0P02

Weitere Codes

Material reference
Material-Referenz Isolast® 9515
Basic polymer ISO 1629 FFKM
Basis-Polymer

Color black / schwarz

Farbe

Hardness DIN ISO 7619-1 75 +/- 3 Shore A

Härte

IRHD
Density DIN EN ISO 1183-1 2.07 +/-0.03 g/cm³
Dichte

ASTM code D2000 / SAE J200

ASTM-Code *1) Material is approved according to ASTM testing
*2) Material was tested independent of ASTM methods. Results are only to be
considered as similar
*1) Werkstoff wurde gemäß den Anforderungen, wie in ASTM D 2000 beschrieben,
geprüft *2) Werkstoff wurde nur in Anlehnung an die ASTM D 2000 geprüft. Die
erhaltenen Ergebnisse sind zwar nicht identisch jedoch als Referenz geeignet.

Temperature range -5 °C to / bis 225 °C

Temperatureinsatzbereich
Maximum and minimum working temperature have to be agreed according to
specific application criteria. / Maximale und minimale Betriebstemperatur
müssen je nach spezifischen Einsatzkriterien abgestimmt werden.

Market segments
Marktbereiche

Applications
Einsatzgebiete

The indicated material properties at measured values are mean values determined with standard test bars. They may not be used as
specification values and they are not directly comparable to material properties of finished parts. This is to emphasise that the
customer himself is obliged to test the material with regard to its suitability in the application. This data sheet has not a change of
service.
Die unter Istwert angegebenen Kennwerte sind Mittelwerte und wurden an Normprobekörpern bestimmt. Sie dürfen nicht als
Spezifikationswerte verwendet werden. Auch sind sie nicht mit am Fertigteil bestimmten Kennwerten vergleichbar. Der Abnehmer ist
insbesondere nicht davon befreit, selbst die Eignung unserer Ware für den beabsichtigten Verwendungszweck zu prüfen. Das
Datenblatt unterliegt nicht dem Änderungsdienst.

Trelleborg Sealing Solutions Page 1 / 2

21.03.2018 / GMDB
www.tss.trelleborg.com
Path: _QMS / Global Material Database /
Revision No.: 6 Approval: 2014-03-03
 MATERIAL DATA SHEET / MATERIAL-DATENBLATT
old / alt
Material code
Material-Code J9515 ( J9515 )

Properties Norm Required Measured Unit

Eigenschaften Norm Soll Ist Einheit

Hardness DIN ISO 7619-1 75 +/- 3 Shore A

Härte
IRHD
Density DIN EN ISO 1183-1 2.07 +/-0.03 g/cm³
Dichte

Modulus 100 % ISO 37

Spannungswert 100 %

Tensile strength min. 10.0 MPa

Zugfestigkeit

Elongation at break min. 125 %

Bruchdehnung

Compression set
Druckverformungsrest
72 h / 200 °C DIN ISO 815 (B) %
h/ °C %

Low temperature behaviour

Kälteflexibilität

TR point DIN 53 545 4 °C

TR Punkt

TR 10 point TBS 00036 -1 °C

TR 10 Punkt

TG point ISO 11357-1/-2 -4 °C

TG Punkt

Additional compound information about approvals, resistance tests etc. are available on request.
Weitere Werkstoffinformationen über Freigaben, Beständigkeitsuntersuchungen usw. erhalten Sie auf Anfrage .

Trelleborg Sealing Solutions Page 2 / 2

21.03.2018 / GMDB
www.tss.trelleborg.com
Path: _QMS / Global Material Database /
Revision No.: 6 Approval: 2014-03-03
 DATA SHEET
MATERIAL REFERENCE 9515 (J9515)

Application Projected Service Temperatures

Trelleborg Sealing Solutions material 9515 is a Minimum -5°C

black perfluoroelastomer compound. It exhibits Maximum +250°C
excellent resistance to strong bases, acids, polar
solvents and steam. 9515 is suited to a wide
range of sanitary applications and meets many
related standard & institute requirements.

Properties

Test Specification Typical

Test Criteria
Method Limits Results

Hardness ASTM D2240 72 to 78 Shore A 73 Shore A

Tensile Strength ISO 37 10 MPa min 20.6 MPa

Elongation at Break ISO 37 125% min 155%

Specific Gravity ISO 2781 2.07±0.03 2.07

Long Term Compression Set Resistance

The information contained herein is accurate to the extent of our current technical knowledge. Trelleborg Sealing Solutions makes
no warranty that the material is suitable for all applications. Customers should undertake their own tests to ensure suitability for
particular conditions of operation.

© Trelleborg Sealing Solutions 2018

All Rights Reserved
Issue No: 2 Page 1 of 3
 DATA SHEET
MATERIAL REFERENCE 9515 (J9515)

Declarations of Compliance

Institute/Compliance

Complies with Regulation 21 CFR 177.2600 of the US-American Food and

Drug Administration (FDA) and meets the extraction requirements according
FDA
to Regulation 21 CFR 177.2400 (d): ”Perfluorocarbon cured elastomers” and
21 CFR 177.2600 (e,f): ”Rubber articles intended for repeated use”
Complies with the test requirements of: ”3-A® Sanitary Standards for Multiple-
Use Rubber and Rubber-Like Materials Used as Product Contact Surfaces in
Dairy Equipment, Number 18-03”.
3-A® Sanitary
C3.1, C2.1.1, C2.2.1, C2.2.2, C2.2.3, D4.6, D4.8, D4.9

Class I
(Sterilization Temperature up to 149oC/300oF)
Passed the migration and sensory requirements of the German Food and Feed
Code (LFGB), The Federal Institute for Risk Assessment (BfR) XXI, Category
1, and Article 3 of the Regulation (EC) 1935/2004 for aqueous, alcoholic and
Regulation (EC) 1935/2004
fatty food.
The testing was done according to 82/711/EEC and 85/572/EEC and latest
amendments at date of testing (Date: 2010-10-15).
Is free of animal derived ingredients (ADI) and does not contain any raw
ADI-free
materials dervied from bovine or animal sources.
BIOLOGICAL REACTIVITY TESTS; IN VITRO
Chapter 87 has no cytotoxic effects in all extracts acc. to:
DIN EN ISO 10993-5 / USP 25, 2002, Chapter 87.
BIOLOGICAL REACTIVITY TESTS; IN VIVO
USP Chapter 88 complies with the requirements of:
“Class VI” (121oC), USP 25, 2002, Chapter 88.
PHYSICO CHEMICAL TESTS
Chapter 381 complies with the requirements of:
USP 36, 2013, Chapter 381.

The information contained herein is accurate to the extent of our current technical knowledge. Trelleborg Sealing Solutions makes
no warranty that the material is suitable for all applications. Customers should undertake their own tests to ensure suitability for
particular conditions of operation.

© Trelleborg Sealing Solutions 2018

All Rights Reserved
Issue No: 2 Page 2 of 3
 DATA SHEET
MATERIAL REFERENCE 9515 (J9515)

Resistance to CIP Solutions

Hardness Volume
Manufacturer CIP Product Type Conditions
Change Change

Cosa DES, 1% Acid, Oxidiser 168 hrs at 40oC +1 Shore A 0%

Cosa CIP 72, 2% Acid 168 hrs at 70oC 0 Shore A +2%

Cosa CIP 77, 2% Acid, Detergent 168 hrs at 60oC 0 Shore A 0%

Cosa CIP 90, 3% Alkali 168 hrs at 60oC -1 Shore A +1%

Cosa CIP 92, 3% Alkali 168 hrs at 60oC -1 Shore A -1%

Cosa CIP 95, 3% Alkali 168 hrs at 60oC 0 Shore A 0%

Ecolab
Cosa PUR 80, 1.5% Additive 168 hrs at 60oC 0 Shore A +1%

Cosa PUR 83, 2%

Additive / Alkali 168 hrs at 60oC -1 Shore A +1%
(in 3% Cosa CIP 92)

Cosa PUR 84, 2% Additive 168 hrs at 70oC -1 Shore A +1%

Cosa PUR 85,1% Additive 168 hrs at 70oC -1 Shore A 0%

Cosa PUR 88, 2%

Additive / Alkali 168 hrs at 60oC -1 Shore A +1%
(in 2% Cosa CIP 92)

Clearklens Activ VH8, 1% Acid / Oxidiser 168 hrs at 40oC 0 Shore A +1%

Clearklens Brite VH3, 3% Acid 168 hrs at 60oC 0 Shore A 0%

Clearklens Dilac VH14, 2.5% Acid 168 hrs at 60oC -1 Shore A +1%

Clearklens Flow VH20, 5% Alkali 168 hrs at 60oC 0 Shore A +1%

Clearklens Kristalle VH06, 2% Detergent 168 hrs at 60oC 0 Shore A +1%

Diversey
Clearklens NTC VH18, 4% Alkali 168 hrs at 60oC 0 Shore A +1%

Clearklens Power VH22, 5% Alkali 168 hrs at 40oC 0 Shore A 0%

Alkali /
Clearklens Pro VH17, 1.5% 168 hrs at 60oC 0 Shore A +1%
Detergent

Clearklens Scale VH02, 6% Acid 168 hrs at 60oC 0 Shore A +1%

Clearklens Solve VH21, 5% Alkali 168 hrs at 40oC 0 Shore A +1%

The information contained herein is accurate to the extent of our current technical knowledge. Trelleborg Sealing Solutions makes
no warranty that the material is suitable for all applications. Customers should undertake their own tests to ensure suitability for
particular conditions of operation.

© Trelleborg Sealing Solutions 2018

All Rights Reserved
Issue No: 2 Page 3 of 3