UNIVERSAL ELECTRIC

VEHICLE CHARGER

Up to 7.2kW Universal Charging Socket

SIMPLE • COMPACT • AFFORDABLE

Model No.
EVON0010
EVON0040

INSTALLATION & USER GUIDE

Thank you for choosing to charge with QUBEV. Inside you
will find some useful hints and tips as we want your experience
with the QUBEV to be as smooth as possible!
REF: QUBEV-UG-01
Contents Of Your Package

• 1 x QUBEV • 4 x fixing screws

• 4 x wall plugs • 1 x fixing template
• 4 x washers • 1 x Installation & User Guide

Safety

The device has been manufactured in accordance with state-of-the-art

recognised safety standards. However, incorrect operation or misuse
may result in:
• Injury or death to the operator or third parties
• Damage to the device and other property of the operator
• Inefficient operation of the device

All persons involved in commissioning, maintaining and

servicing the device must:
• Be suitably qualified
• Have knowledge of and experience in dealing with electrical installations
• Read and follow these operating instructions carefully
• Always disconnect the device from the supply before removing the cover

The device is not to be used by persons with reduced physical, sensory or

mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the device by a person
responsible for their safety.
Failure to install and operate the QUBEV in accordance with these instructions
may damage the unit and invalidate the manufacturer’s warranty.

Disposal

In accordance with European Directive 2002/96/EC on waste

electrical and electronic equipment and its implementation in
national law, used electrical devices must be collected
separately and recycled in an environmentally responsible
manner. Ensure that you return your used device to your dealer
or obtain information regarding a local, authorised collection
and disposal system. Failure to comply with this EU Directive
may result in a negative impact on the environment.
INSTALLATION
We would advise that the QUBEV be installed by a qualified
electrician in accordance with local regulations.

Step-By-Step Guide

1. Remove the QUBEV from the packaging.

2. Cut the fixing template from the packaging.
3. Offer the QUBEV fixing template up onto a flat and smooth surface,
ensuring it is level, and mark the 4 fixing holes onto the surface.
4. Drill 4 x marked fixing holes and insert wall plugs.
5. Undo the 4 x front cover fixing screws at each corner of the QUBEV.
6. Cut/drill out the correct sized hole in the bottom or back of the QUBEV
for your chosen cable gland.
7. Fit your chosen cable gland in place.
Tip: Please ensure at this point there is no debris inside the QUBEV.
8. Place the QUBEV in-line with the 4 x drilled fixing holes on the surface.
9. Place the washer over the screw. Screw through the back of the
QUBEV and into the 4 x wall plugs.

Tip: Ensure this is tightened and level.

10. Ensure the cable is glanded to the QUBEV by the appropriate water
resistant method, and connect to the incoming supply terminals (live,
neutral and earth).
Tip: Ensure all terminals are tightened, as it is possible the connection
may have come loose during transit and/or installation.
11. Ensure you have done all appropriate testing to current regulations.
12. Please now fix the lid of the QUBEV back to the front of the unit and
tighten all 4 corner screws to ensure it is watertight.
PLEASE NOTE: The installer should select the appropriate fault and
overload protection/RCD/RCBO and earthing configuration in
accordance with the IET Code of Practice and local regulations.
13. RCBOs for these units are available at
www.evonestop.co.uk/switchgear
14. Once installation is complete,
don’t forget to TWEET! @evonestop
USER GUIDE

LED Status Indicator Guide

• Blue – Ready to charge

• Green – Charging in progress
• Red – Fault indicated. Switch off power at source for
30 seconds and switch back on to clear fault

If any of the above faults persist then contact our technical support
team at [email protected] or contact your supplier.

Ready Charging Fault

Variable Current Rating

• 6amp
• 13amp
• 16amp
• 32amp

TIP: The rotary switch to alternate

between amperages can be found on the
side of the QUBEV, clearly labelled with
current ratings – simply switch to the
position of choice.

IMPORTANT NOTE: The amperage selector CANNOT be changed when charging is

in progress. To select a different amperage you MUST release the cable from the
vehicle for 30 seconds to allow the QUBEV to register it is NOT in charge mode and
return back to BLUE on the status indicator – NOW you can alter the amperage.
Note: Please ensure the current rating does not exceed the supply rating.
Vehicle Charging

• Ensure the LED is illuminated blue

• Insert the cable into the vehicle first and
then the QUBEV socket (if a tethered
cable, insert the tethered cable into
the vehicle)
• LED will go green when charging
• To STOP charging unplug the cable from
the vehicle, and then from the QUBEV
Tip: When using any charging point ALWAYS release the cable from
the vehicle before the charging point.
To prevent water damage always plug the tethered cable into the
remote socket when not charging (only applies to tethered models).

QUBEV Maintenance

• Clean surface regularly with a damp cloth

• Visually inspect the QUBEV for any damage
• Annually electrically inspect and test the QUBEV

Happy charging!
DATA SHEET
QUBEV Charging Unit

Model No. EVON0010 EVON0040

Description QUBEV Universal Socket EV QUBEV Universal Socket EV
Charging Unit Charging Unit (DC)
MECHANICAL DATA
Dimensions 150mm x 200mm x 100mm (W x H x D)
Unit Weight 1.5kg
Unit Material ABS (UL94 HB Fire Rated), IK08
Unit Colour Matt Black
Operating Temperature -20°C to +50°C
Protection IP65 - Enclosure, IP54 - Socket
ELECTRICAL DATA
Rated Output Up to 7.2kW (32A)
Rated Current Up to 32A max
Charging Current Variable - 6A, 13A, 16A & 32A
Input Voltage 230V AC/50Hz (Single Phase)
Incoming Cable Terminals 3 x 16mm terminals
Overcurrent Protection Recommended 40A
AC Earth Leakage Protection Not included in unit
(Type A or Type B RCBO available as an option)
DC Earth Leakage Protection Not included in unit Includes built-in 6mA DC
(Type A or Type B RCBO sensitive protective device
available as an option) – no Type B RCBO required
Charging Socket IEC 62196 (Type 2)
Charge Protocol Mode 3
EV Charging Compliance EN 61851-1:2001, EN 61851-21:2002, EN 61851-22:2002
Certifications Wiring Regulations - BS 7671 –
& Compliances IET EV Regulations, Glow Wire Testing - IEC 60695-2-13
EMC Compliance - EN 61000-6-3:2007, EN 61000-6-2:2005
Safety Compliance - EN 60950-1:2006, EN 60950-22:2006,
Low Voltage Directive (LVD) 2014/35/EU CE Certified
OPTIONS & ACCESSORIES
• Key switch control charging
• External 30mA Type A RCBO
• EV charging cables (Type 1 to Type 2 or Type 2 to Type 2)
• Charge point signage
WARRANTY
Subject to the provisions described below, this product is protected for one (1) year from
the date of purchase against defects in material and workmanship.

Prior to returning any defective product to EV Onestop, the end customer must report
the faulty product to EV Onestop by either emailing EV Onestop at support@evonestop.
co.uk or calling EV Onestop on +44 (0)1205 725 867. If EV Onestop agrees that the
product should be returned, it will issue a Return Authorisation number. This number
must be clearly marked on the packaging of the product to be returned. EV Onestop
may provide a prepaid label at its discretion, otherwise the customer should return the
product at their own cost.

Should the product fail to perform as described within the relevant warranted period as
set out above, it will be repaired or replaced with the same or functionally equivalent
product by EV Onestop, at its discretion, free of charge provided the end customer: (1)
returns the failed product to EV Onestop with shipping charge prepaid, and (2) provides
EV Onestop with proof of the original date of purchase. Returned or replacement
products will be returned to the end customer with shipping charges prepaid.

Replacement products may be refurbished or contain refurbished materials. If EV

Onestop, by its sole determination, is unable to repair or replace the defective product, it
will replace or refund the depreciated purchase price of the product.

The warranty does not apply if, in the judgement of EV Onestop, the product fails due to
damage from shipment, handling, storage, incorrect installation, accident, inappropriate
use or cleaning of the product, relocation of the product after its first installation, abuse,
misuse, or if it has been used or maintained in a manner not conforming to product
manual instructions, has been modified in any way, or has had any serial number or
other identification markings removed or defaced.

Repair by anyone other than a qualified electrician will void this warranty.

All defective products should be returned to EV Onestop with shipping charges prepaid,
unless EV Onestop have provided a prepaid label. EV Onestop will not supply prepaid
returns labels outside of the UK.

Should an issue be found with your unit EV Onestop will return your repaired/replaced
unit free-of-charge to any UK address. Should the return address be outside of the UK
return postage will be at EV Onestop’s discretion. If the unit is found not to be defective
return postage will need to be paid for by the customer.

Nothing in this agreement will affect the end customer’s statutory rights, or limit or
exclude EV Onestop’s liability for (1) death or personal injury caused by its negligence, or
the negligence of its employees, agents or subcontractors (as applicable); (2) fraud or
fraudulent misrepresentation; (3) defective products under the Consumer Protection Act
1987;or (4) any matter in respect of which it would be unlawful for EV Onestop to
exclude or restrict liability.

The maximum liability of EV Onestop under this warranty is limited to the purchase
price of the product covered by the warranty.

EV Onestop only supply products for resale for domestic, light commercial and private
use. EV Onestop accept no liability to the end customer for any loss of profit, loss of
business, business interruption, loss of business opportunity or travel time incurred.
 SIMPLE • COMPACT • AFFORDABLE

Europe’s largest dedicated supplier of electric

vehicle cables, charging points and accessories

t: +44 (0) 1205 725867

e: [email protected]

@evonestop
British by Design
& Manufacture evonestop.co.uk

Images are for marketing purposes only and are not contractual.  © 2019 EV Onestop Europe Limited. All rights reserved.