Installation / User Manual

Photovoltaic Grid-connected
Microinverter(Built-in WIFI-G3)
 Table of Contents
Important Safety Instructions 01-03

Microinverter System Introduction 03-05

Microinverter Introduction 05
Microinverter System Installation 06-10

Microinverter System Operating Instructions 10-11

Troubleshooting 11-13

Replacement 14
Technical Data 14-15

Wiring Diagram 16-17

Monitoring Platform 18

How to Configure the Microinverter to the Router Via Web 19-22

How to connect in APP 23-27

Important Safety Instructions

WARNING

NOTE

Safety Instructions
Radio Interference Statement

The Meaning of Symbols

Microinverter System Introduction

600 / 800 / 1000G3

NOTE

Microinverters Maximize PV Energy Production

More Reliable than Centralized or String Inverters

Simple to Install

Microinverter Introduction

Model Max. #
AC grid
Number Per branch
Microinverter System Installation

WARNING:
WARNING:

WARNING:

WARNING:

NOTE

Additional Installation components

Required Parts and Tools from you

Parts list
Please check the following table, to see whether all the parts are included in the package

User
manual

Microinverter x1 User manual x1 AC power connectors

(op�onal) x1

*Antenna for WIFI

module x1

* This antenna is for microinverter that has built-in wifi module.

Installation Procedures
    
WARNING

     
 


²
WARNING

WARNING

 
  

WARNING
   

      

NOTE

Microinverter System Operating Instructions

To operate the microinverter PV system:

NOTE

Troubleshooting

Status Indications and Error Reporting

WARNING

Troubleshooting a non-operating Microinverter

To troubleshoot a non-operating Microinverter, Follow the steps
below in order:

WARNING
Replacement

Follow the procedure to replace a failed Microinverter

Technical Data

WARNING

WARNING

WARNING
600G3/800G3/1000G3 Microinverter Datasheet

Input Data (DC)

Output Data (AC)

Efficiency

Mechanical Data

Features
 Wiring Diagram

   
­
600/800/1000G3 (2MPPT)
 
   
 
600/800/1000G3 (2MPPT)
Monitoring Platform

https://pro.solarmanpv.com
https://home.solarmanpv.com

SOLARMAN Smart SOLARMAN Business

for end user for distributor/installer
How to Configure the Microinverter to the Router Via Web

Safe

Microinverter SN

Safe

Safe

Safe

Microinverter SN: 2208314002 Built-in datalogger :1704013242

10.10.100.254

http://10.10.100.254 Please input username and password.“USER LOGIN”

Username: admin
Status
Wizard Password: Help
Quick Set Sure Cancel The setup wizard will assist
you to complete the device
Advanced setting within one minute.

Upgrade
Restart
Reset

“ ”
Status
Inverter information Help
Wizard
Inverter serial number
Quick Set Firmware version(main)
The device can be used as
Advanced Firmware version(slave) a wireless access point(AP
mode) to facilitata users to
Upgrade Inverter model configure the device, or it
Rated power can also be used as a
Restart W
wireless information terminal
Current power W (STA mode) to connect the
Reset remote server via wireless
Yield today kWh router.
Current power kWh
Status of remote server
Alerts Not connected: Connection
to server failed last time.
Last updated
If under such status, please
check the issues as follows:
Device information (1)check the device
information to see whether
Device serial number 1704013242 IP address is obtained or
Firmware version LSW3_14_FFFF_1.0.23 not;
(2)check if the router is
Wireless AP mode Enable connected to internet or not;
(3)check if a firewall is set
SSID AP_1704013242 on the router or not;
IP address 10.10.100.254
Connected: connection to
MAC address 8C:D8:B3:71:8D:B0 server successful last time;
Wireless STA mode Disable
Unknown: No connection
Router SSID to server.Please check
again in 5 minutes.
Signal Quality

IP address
MAC address

Remote server information

Remote server A Not connected

Remote server B Not connected

Status Please select your current wireless network:

Help
Wizard
IE-2.4G-TEST 54:A7:3:70:99:13 82 1
Quick Set 0:BE:D5:20:B8:2C 80 1
AP_1753738492 30:EA:E7:36:B:36 78 2 The setup wizard will assist
Advanced IGEN_office_2.4G 0:BE:D5:20:B8:2C 76 1 you to complete the device
74 6 setting within one minute.
Upgrade IGENTEST E8:65:D4:F2:15:B8
90:5D:7C:97:95:29 74 1
Restart IGEN_office_2.4G 90:5D:7C:97:95:27 72 1
90:5D:7C:97:C9:E5 72 1
Reset AP_1719065936 30:EA:E7:36:CF:B2 70 1
IGEN_office_2.4G 90:5D:7C:97:C9:E3 70 1
TESR+“”= 4A:E:EC:9E:C3:3E 70 11
IGEN_office_2.4G 0:BE:D5:20:B7:EE 66 11
AP_517075065 98:D8:63:76:BA:24 66 1
Note: When RSSI of the selected WiFi network is lower than 15%, the
connection may be unstable, please select other available network or
shorten the distance between the device and router.

Refresh

Add wireless network manually:

Network name (SSID) IE-2.4G-TEST
(Note:case sensitive)
Encryption method WPA2PSK
Encryption algorithm AES

Next

1 2 3 4
Status
Help
Wizard

Quick Set
Please fill in the following information:
Most systems support the
Advanced
function of DHCP to obtain
Upgrade IP address automatically.
Please select disable and
Password(8-64 bytes) add it manually if your router
Restart (Note: case sensitive)
Show Password does not support such
Reset function.

Obtain an IP address Enable

automatically
IP address

Subnet mask

Gateway address

DNS server address

Back Next

1 2 3 4

Status
Help
Wizard

Quick Set Enhance Security

Change the encryption
mode for AP
Advanced
If you set password for the
You can enhance your system security by choosing the AP network, you will need to
Upgrade
following methods enter the password to
Restart connect to AP.
Hide AP
Reset Change the user name
Change the encryption mode for AP and password for Web
server
If you change the username
Change the user name and password for Web server and password for the web
server, you will need to enter
the new username and
password to get access to
the setting page.

Back Next

1 2 3 4
Status
Help
Wizard

Quick Set Setting complete!

After clicking OK,the
Advanced system will restart
Click OK, the settings will take effect and the system will immediately.
Upgrade
restart immediately.
Restart

Reset If you leave this interface without clicking OK, the settings will
be ineffective.

Back OK

1 2 3 4

Status
Inverter information Help
Wizard
Inverter serial number
Quick Set Firmware version(main)
The device can be used as
Advanced Firmware version(slave) a wireless access point(AP
mode) to facilitata users to
Upgrade Inverter model configure the device, or it
Rated power can also be used as a
Restart W wireless information terminal
Current power W (STA mode) to connect the
Reset remote server via wireless
Yield today ---kWh router.
Current power
---kWh
Status of remote server
Alerts Not connected: Connection
to server failed last time.
Last updated
If under such status, please
check the issues as follows:
Device information (1)check the device
information to see whether
Device serial number 1704013242 IP address is obtained or
Firmware version LSW3_14_FFFF_1.0.23 not;
(2)check if the router is
Wireless AP mode Disable connected to internet or not;
(3)check if a firewall is set
SSID on the router or not;
IP address
Connected: connection to
MAC address server successful last time;
Wireless STA mode Enable
Unknown: No connection
Router SSID IE-2.4G-TEST to server. Please check
again in 5 minutes.
Signal Quality 100%
IP address 172.16.30.247
MAC address 98:D8:63:71:8D:B0

Remote server information

Remote server A connected

Remote server B Not connected

How to connect in APP
1. Registration

English Register

SOLARMAN Smart
Phone Number E-mail

E-mail Phone Number Username

E-mail E-mail
Please enter E-mail
E-mail

Password Verification Code

Please enter verification code Retrieve Xs
password

Password

Password
Log In
Password length must be greater than 6bits

Register Forgot Password?

2. Create a Plant

MY Plants Plant Details

Basic Info

Plant Name Demo plant -Commercial

Plant Loc Zhwjiang yuyao

Time Zone ((UTC+08:00)Beijing,Chongqing,

HongKong,Urumqi)

Creation Date 2019-05-04

Founder Clavin
YOU have no plants for now.

System Info
System Info
Add Now
Plant Type Residential Rooftop

System Type All on Grid

Installed Capacity(kWp) 18350

Finish
plant Me
3. Add a Logger

MY Plants Logger hinzufugen

Create a Plant Bitte geben Sie die Logger-SN ein und fugen Sie sie der
Anlage hinzu.
Add a device
SN Bitte Gerate-SN eingeben

Kann der SN/Barcode nicht gefunden werden?

Demo plant-Micro inverter shared

88.00W 45.38MWh
Current Production
Production-Today
Power

45.38K CNY 773.30K CNY

Anticipated Yield- Anticipated Yield-This
Today Month

hinzufugen

More

4. Network Configuration

Device Details

Inverter NO. of Connections: 2

Logger Normal
Logger
SN:123341245

Meter Select associated device Device Networking

Module
Logger Offine

SN:136689995

Device Networking
Step 1：Confirm Wi-Fi Info

Notice:

SN:2312423

Password

App_only Change network

5G frequency band is not supprted.

Please connect to 2.4G frequency band.

Start to configure

Step 2：Connect to AP network

 settings WLAN
1 Go to WLAN Setting and connect the
following network manually
WLAN
Android

MY NETWORKS ChinaNet

Android
AP_622602179
AP_622602179

HYH123

IGWN-5G
ChinaNet
IGWN-HILINK

AP_622602179

HYH123

IGWN-5G AP_622602179

Password
OTHER NETWORKS

Show advanced options

act-blue

ChinaNet-igen

Step 3：Auto Configuration

 Device Configuration

Configurtion succeeded

Device data will be displayed in 10 mins. After that,

Please shorten the distance between the device, you can check device status in device list.
router and phone.

Connect to device

Configuring

Restart

Verified

Done