0% found this document useful (0 votes)
8 views15 pages

878286 (1)

The document provides detailed specifications for LITE-ON's optoisolators (LTV-817, LTV-827, LTV-847) including features, outline dimensions, electrical characteristics, and compliance approvals. It highlights key parameters such as current transfer ratio, isolation voltage, response time, and maximum ratings. Additionally, it includes rank tables for current transfer ratios and various characteristic curves for performance analysis.

Uploaded by

bahman karamati
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
8 views15 pages

878286 (1)

The document provides detailed specifications for LITE-ON's optoisolators (LTV-817, LTV-827, LTV-847) including features, outline dimensions, electrical characteristics, and compliance approvals. It highlights key parameters such as current transfer ratio, isolation voltage, response time, and maximum ratings. Additionally, it includes rank tables for current transfer ratios and various characteristic curves for performance analysis.

Uploaded by

bahman karamati
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 15

Distributed by:

www.Jameco.com ✦ 1-800-831-4242
The content and copyrights of the attached
material are the property of its owner.

Jameco Part Number 878286


LITE-ON TECHNOLOGY CORPORATION
Property of LITE-ON Only

FEATURES
* Current transfer ratio
( CTR : MIN. 50% at IF = 5mA, VCE = 5V )
* High input-output isolation voltage
( Viso = 5,000Vrms )
* Response time
( tr : TYP. 4µs at VCE = 2V, IC = 2mA, RL = 100Ω )
* Dual-in-line package :
LTV-817 : 1-channel type
LTV-827 : 2-channel type
LTV-847 : 4-channel type
* Wide lead spacing package :
LTV-817M : 1-channel type
LTV-827M : 2-channel type
LTV-847M : 4-channel type
* Surface mounting package :
LTV-817S : 1-channel type
LTV-827S : 2-channel type
LTV-847S : 4-channel type
* Tape and reel packaging :
LTV-817S-TA1, LTV-827S-TA1
* UL approved ( No. E113898 )
* TUV approved ( No. R9653630 )
* CSA approved ( No. CA91533-1 )
* FIMKO approved ( No. 202634 )
* NEMKO approved ( No. P98101945 )
* DEMKO approved ( No. 307857 )
* SEMKO approved ( No. 0109172 / 01-03 )
* VDE approved (No. 40015248 )
* BSI approved ( No. 8701 ) \
* RoHS compliance
* ◇ Critical characteristic
* ○ Safety or compliance characteristic.

Part No. : LTV-817 / 827 / 847 ( M, S, S-TA1 ) Page : 1 of 14


BNS-OD-C131/A4
LITE-ON TECHNOLOGY CORPORATION
Property of LITE-ON Only

OUTLINE DIMENSIONS
LTV-817 :

TYPE I (INK MARK) TYPE II (LASER MARK)

◇ ◇
◇ ◇

LTV-827 :

◇ ◇

*1. Year date code.


*2. 2-digit work week.
*3. Factory identification mark shall be marked (Z : Taiwan, Y : Thailand, X : China).
*4. Rank shall be or shall not be marked.

Part No. : LTV-817 / 827 / 847 ( M, S, S-TA1 ) Page : 2 of 14


BNS-OD-C131/A4
LITE-ON TECHNOLOGY CORPORATION
Property of LITE-ON Only

OUTLINE DIMENSIONS
LTV-847 :


LTV-817M :

TYPE I (INK MARK) TYPE II (LASER MARK)

◇ ◇
◇ ◇

*1. Year date code.


*2. 2-digit work week.
*3. Factory identification mark shall be marked (Z : Taiwan, Y : Thailand, X : China).
*4. Rank shall be or shall not be marked.

Part No. : LTV-817 / 827 / 847 ( M, S, S-TA1 ) Page : 3 of 14


BNS-OD-C131/A4
LITE-ON TECHNOLOGY CORPORATION
Property of LITE-ON Only

OUTLINE DIMENSIONS
LTV-827M :


LTV-847M :

◇ ◇

*1. Year date code.


*2. 2-digit work week.
*3. Factory identification mark shall be marked (Z : Taiwan, Y : Thailand, X : China).
*4. Rank shall be or shall not be marked.

Part No. : LTV-817 / 827 / 847 ( M, S, S-TA1 ) Page : 4 of 14


BNS-OD-C131/A4
LITE-ON TECHNOLOGY CORPORATION
Property of LITE-ON Only

OUTLINE DIMENSIONS

LTV-817S :

TYPE I (INK MARK) TYPE II (LASER MARK)

◇ ◇ ◇

LTV-827S :


*1. Year date code.


*2. 2-digit work week.
*3. Factory identification mark shall be marked (Z : Taiwan, Y : Thailand, X : China).
*4. Rank shall be or shall not be marked.

Part No. : LTV-817 / 827 / 847 ( M, S, S-TA1 ) Page : 5 of 14


BNS-OD-C131/A4
LITE-ON TECHNOLOGY CORPORATION
Property of LITE-ON Only

OUTLINE DIMENSIONS

LTV-847S :


*1. Year date code.


*2. 2-digit work week.
*3. Factory identification mark shall be marked (Z : Taiwan, Y : Thailand, X : China).
*4. Rank shall be or shall not be marked.

Part No. : LTV-817 / 827 / 847 ( M, S, S-TA1 ) Page : 6 of 14


BNS-OD-C131/A4
LITE-ON TECHNOLOGY CORPORATION
Property of LITE-ON Only

TAPING DIMENSIONS
LTV-817S-TA1 :

LTV-827S-TA1 :

Description Symbol Dimensions in mm ( inches )


Tape wide W 16 ± 0.3 ( .63 )
Pitch of sprocket holes P0 4 ± 0.1 ( .15 )
F 7.5 ± 0.1 ( .295 )
Distance of compartment
P2 2 ± 0.1 ( .079 )
Distance of compartment to compartment P1 12 ± 0.1 ( .472 )

Part No. : LTV-817 / 827 / 847 ( M, S, S-TA1 ) Page : 7 of 14


BNS-OD-C131/A4
LITE-ON TECHNOLOGY CORPORATION
Property of LITE-ON Only

ABSOLUTE MAXIMUM RATING


( Ta = 25°C )
PARAMETER SYMBOL RATING UNIT

Forward Current IF 50 mA

INPUT Reverse Voltage VR 6 V

Power Dissipation P 70 mW

Collector - Emitter Voltage VCEO 35 V

Emitter - Collector Voltage VECO 6 V


OUTPUT
Collector Current IC 50 mA

Collector Power Dissipation PC 150 mW

Total Power Dissipation Ptot 200 mW

*1 Isolation Voltage ○ Viso 5,000 Vrms

Operating Temperature(LTV- 827 / 847) Topr -30 ~ +100 °C

Operating Temperature (LTV-817) Topr -30 ~ +110 °C

Storage Temperature Tstg -55 ~ +125 °C

*2 Soldering Temperature Tsol 260 °C

*1. AC For 1 Minute, R.H. = 40 ~ 60%


Isolation voltage shall be measured using the following method.
(1) Short between anode and cathode on the primary side and between collector and
emitter on the secondary side.
(2) The isolation voltage tester with zero-cross circuit shall be used.
(3) The waveform of applied voltage shall be a sine wave.

*2. For 10 Seconds

Part No. : LTV-817 / 827 / 847 ( M, S, S-TA1 ) Page : 8 of 14


BNS-OD-C131/A4
LITE-ON TECHNOLOGY CORPORATION
Property of LITE-ON Only

ELECTRICAL - OPTICAL CHARACTERISTICS


( Ta = 25°C )
PARAMETER SYMBOL MIN. TYP. MAX. UNIT CONDITIONS

Forward Voltage VF — 1.2 1.4 V IF=20mA

INPUT Reverse Current IR — — 10 µA VR=4V

Terminal Capacitance Ct — 30 250 pF V=0, f=1KHz

Collector Dark Current ICEO — — 100 nA VCE=20V, IF=0

Collector-Emitter IC=0.1mA
BVCEO 35 — — V
OUTPUT Breakdown Voltage IF=0

Emitter-Collector IE=10µA
BVECO 6 — — V
Breakdown Voltage IF=0

Collector Current IC 2.5 — 30 mA


IF=5mA
VCE=5V
*1 Current Transfer Ratio ◇ CTR 50 — 600 %

Collector-Emitter IF=20mA
VCE(sat) — 0.1 0.2 V
Saturation Voltage IC=1mA

DC500V
Isolation Resistance Riso 5×1010 1×1011 — Ω
TRANSFER 40 ~ 60% R.H.
CHARACTERISTICS
Floating Capacitance Cf — 0.6 1 pF V=0, f=1MHz

VCE=5V, IC=2mA
Cut-Off Frequency fc — 80 — kHz
RL=100Ω, -3dB

Response Time (Rise) tr — 4 18 µs


VCE=2V, IC=2mA
RL=100Ω
Response Time (Fall) tf — 3 18 µs

IC
*1 CTR = × 100%
IF

Part No. : LTV-817 / 827 / 847 ( M, S, S-TA1 ) Page : 9 of 14


BNS-OD-C131/A4
LITE-ON TECHNOLOGY CORPORATION
Property of LITE-ON Only

RANK TABLE OF CURRENT TRANSFER RATIO CTR

MODEL NO. RANK MARK CTR ( % )

L 50 ~ 100

A 80 ~ 160

B 130 ~ 260
LTV-817
C 200 ~ 400

D 300 ~ 600

L or A or B or C or D 50 ~ 600

B 130 ~ 260

B or C or BC 130 ~ 400
LTV-827
C 200 ~ 400
LTV-847
C or D or CD 200 ~ 600
B、BC、C、CD or No mark 50 ~ 600

IF = 5 mA

CONDITIONS VCE = 5 V
Ta = 25 °C

Part No. : LTV-817 / 827 / 847 ( M, S, S-TA1 ) Page : 10 of 14


BNS-OD-C131/A4
LITE-ON TECHNOLOGY CORPORATION
Property of LITE-ON Only

CHARACTERISTICS CURVES

Fig.1 Forword Current Fig.2 Collector Power Dissiption


vs. Ambient Temperatute vs. Ambient Temperature
60 200

Collector Power dissipation Pc (mW)


50
Forward current IF (mA)

150
40

30 100

20
50
10

0 0
-30 0 25 50 75 100 125 -30 0 25 50 75 100 125
o o
Ambient temperature Ta ( C) Ambient temperature Ta ( C)

Fig.3 Collector-emitter Saturation Fig.4 Forward Current vs. Forward


Voltage vs. Forward Current Voltage
6
500
1mA
3mA
5mA
7mA
Collecotr-emitter saturation voltage

Ic=0.5mA

O
Ta=25 C o
Ta=75 C
5 200 50 C
o
25 C
o
Forward current I F (mA)

o
0C
100 o

4 -25 C
50
3
20

2 10
VCE (sat) (V)

5
1
2
0 1
0 5 10 15 0 0.5 1.0 1.5 2.0 2.5 3.0
Forward current IF (mA) Forward voltage VF (V)

Fig.5 Current Transfer Ratio vs. Fig.6 Collector Current vs.


Forward Current Collector-emitter Voltage
200 30
V CE=5V I F =30mA Ta=25 C
o

180 o
Ta=25 C
Current transfer ratio CTR (%)

25 20mA
160
Collector current Ic (mA)

Pc(MAX.)
140
20
120
100 15
10mA
80
10
60
5mA
40
5
20
0 0
1 2 5 10 20 50 0 1 2 3 4 5 6 7 8 9
Forward current IF (mA) Collector-emitter voltage VCE (V)

Part No. : LTV-817 / 827 / 847 ( M, S, S-TA1 ) Page : 11 of 14


BNS-OD-C131/A4
LITE-ON TECHNOLOGY CORPORATION
Property of LITE-ON Only

CHARACTERISTICS CURVES

Fig.7 Relative Current Transfer Ratio Fig.8 Collector-emitter Saturation Voltage


vs. Ambient Temperature vs. Ambient Temperature
150 0.16
I F =5mA

Collector-emitter saturation voltage


I F=20mA
Relative current transfer ratio (%)

VCE =5V 0.14


Ic=1mA
0.12
100
0.10

0.08

0.06
50

VCE (sat) (V)


0.04

0.02

0 0
-30 0 25 50 75 100 125 -25 0 25 50 75 100 125
o o
Ambient temperature Ta ( C) Ambient temperature Ta ( C)

Fig.9 Collector Dark Current vs. Fig.10 Response Time vs. Load
Ambient Temperature Resistance
-5
10 500
VCE =20V VCE =2V
-6 200 Ic=2mA
Collector dark current I CEO (A)

10 Ta=25 C
o

100
Response time ( s)

-7
50 tr
10
20 tf
-8
10 10 td
-9
5
10 ts
2
-10 1
10
0.5
-11
10 0.2
-25 0 25 50 75 100 125 0.05 0.1 0.2 0.5 1 2 5 10
o
Ambient temperature Ta ( C) Load resistance R L(k )

Fig.11 Frequency Response Test Circuit for Response Time

VCE =2V
Ic=2mA
0 Ta=25 C
o
Voltage gain Av (dB)

10 R L=10k 1k 100

20 Test Circuit for Frequency Response

0.5 1 2 5 10 20 50 100 500


Frequency f (kHz)

Part No. : LTV-817 / 827 / 847 ( M, S, S-TA1 ) Page : 12 of 14


BNS-OD-C131/A4
LITE-ON TECHNOLOGY CORPORATION
Property of LITE-ON Only

RECOMMENDED FOOT PRINT PATTERNS (MOUNT PAD)

Unit : mm

4 PIN 8 PIN

16 PIN

Part No. : LTV-817 / 827 / 847 ( M, S, S-TA1 ) Page : 13 of 14


BNS-OD-C131/A4
LITE-ON TECHNOLOGY CORPORATION
Property of LITE-ON Only

Notes:

- Lite-On is continually improving the quality, reliability, function or design and

Lite-On reserves the right to make changes without further notices.

- The products shown in this publication are designed for the general use in electronic

applications such as office automation equipment, communications devices,

audio/visual equipment, electrical application and instrumentation.

- For equipment/devices where high reliability or safety is required, such as space

applications, nuclear power control equipment, medical equipment, etc, please

contact our sales representatives.

- When requiring a device for any ”specific” application, please contact our sales in

advice.

- If there are any questions about the contents of this publication, please contact us at

your convenience.

- The contents described herein are subject to change without prior notice.

Part No. : LTV-817 / 827 / 847 ( M, S, S-TA1 ) Page : 14 of 14


BNS-OD-C131/A4

You might also like