Scribd
Upload
8 views

Homework- Problems-Chap-02

The document contains answers to homework problems from Chapter 2 of CIVL6785, focusing on municipal distribution and collection systems. Key calculations include pressure requirements, flow rates, head losses, and pump specifications. Various flow values and pressures at different nodes are also provided.

Uploaded by

roseadam93.ma
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
8 views

Homework- Problems-Chap-02

The document contains answers to homework problems from Chapter 2 of CIVL6785, focusing on municipal distribution and collection systems. Key calculations include pressure requirements, flow rates, head losses, and pump specifications. Various flow values and pressures at different nodes are also provided.

Uploaded by

roseadam93.ma
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

CIVL6785 Municipal Distribution and Collection Systems

Homework Problems Chapter 2

1
2
Answers to Homework Problems Chapter 2

2.9 Pressure = 390 kPa, Sufficient to serve the top floor.

2.10 Q = 2.65 L/s

2.11 D = 166 mm

2.12 D = 171 mm

2.18 Hp = 11.9 m > 0 , so booster pump will be required. Power = 2.3 kW

2.19 (a) Hp=44.5 m (b) Power = 436 kW (c) Pressure at B = 355 kPa

2.29 (a) Head loss = 8.41 m (b) Head loss = 10.7 m (c) Head loss = 6.63 m

CH = 126, n = 0.01

2.30 QAJ = 2.81 m3/s QBJ = 0.33 m3/s QJC = 3.14 m3/s

2.33 Final flow values (in m3/s)

B 0.1
A C
0.05
0.04 0.045

0.01 0.005 0.055

P 0.07
E F
0.04 0.008

0.03 0.043 0.047

0.06 0.03 0.013


G H I 0.06

3
Pressure at all the nodes is given in the table below.

Pipe L Q ∆p Node Pressure


(m) (m3/s) (kPa) (kPa) (kPa)
PB 100 0.005 0.02 B 500
PF 150 0.008 0.08 F 499.9
PH 100 0.043 1.28 H 501.3
PE 150 0.04 1.67 E 501.7
AB 150 0.04 1.67 A 501.6
BC 150 0.045 2.1 C 497.9
FI 100 0.047 1.52 I 502.8
GH 150 0.03 0.96 G 502.2

2.38 Q = 1.56 m3/s Ns = 12.185 Axial flow pump

2.46 Max. daily Q = 1.21 m3/s Max. hourly Q = 2.18 m3/s

2.47 NFF = 19000 L/min Volume = 5700 m3

2.49 Q design = 2.5 m3/s Duration = 7 hours Volume = 11800 m3

You might also like