TYPE- D STRUCTURE SHEET

FACTORY MADE HOT DIPPED 1000

1000 2000
900
FACTORY MADE HOT DIPPED FACTORY MADE HOT DIPPED 1250
S+5 FLOORS 01
GALVANIZED PRESSED STEEL FACTORY MADE HOT DIPPED
GALVANIZED PRESSED STEEL GALVANIZED PRESSED STEEL
750
GALVANIZED PRESSED STEEL
750
90X45 MM THIK FRP DOOR
750
RES.TEN=20 01
DOOR FRAMES OF
DOOR FRAMES OF DOOR FRAMES OF DOOR FRAMES OF FRAME
140X60X1.60MM
GP STEEL FRAME 90X50X1.60MM 90X50X1.60MM 90X50X1.60MM
4 HINGES
50 MM THK PRESSED
S S FRAME AND FASTENER FASTENER STEEL GALVANIZED DOOR
FASTENER SHUTTER
FASTENER
SHUTTER FASTENER
VIEWING LENS
SHUTTER FACTORY MADE HOT DIPPED
S S GRILL 12MM 35 MM THIK PRESSED 35 MM THIK FLUSH DOOR 35 MM THIK FLUSH DOOR GALVANIZED PRESSED
35 MM THIK PRESSED SQUARE BAR STEEL DOOR SHUTTER SHUTTER SHUTTER 30 MM THIK FRP DOOR STEEL DOOR FRAMES OF
STEEL DOOR SHUTTER SHUTTER 130X60X1.60MM
HANDLE CYLINDRICAL BALL BALL LOCK-KNOB
S.S. HINGES LOCK HANDLE
HANDLE
2100

HEAVY DUTY HANDLE

250MM
2100

2100

2100

2100

2100

1900
125 mm ORNAMENTAL ALDROP S.S. HINGES S.S. HINGES S.S. HINGES S.S HINGES
BRASS HANDLE 250MM MS HEAVY DUTY HEAVY DUTY HEAVY DUTY MEDIUM DUTY
ALDROP ALDROP

2100

1200
100MM BRIGHT
FINISHED CP BRASS CYLINDRICAL BALL DOOR SLIDING BOLT
MORTICE LATCH AND LOCK (150 MM)

900
1150

LOCK
1090

1050

1050

1050
900

900
DOOR STOPPER DOOR STOPPER
F.F.L. F.F.L. F.F.L. F.F.L. DOOR STOPPER F.F.L. DOOR STOPPER F.F.L. F.F.L. F.F.L.

200
30

30

30

30

20
CURB WALL
DISTANCE BAR( PRESSED ANGLE ) DISTANCE BAR( PRESSED ANGLE ) DISTANCE BAR/( PRESSED ANGLE ) DISTANCE BAR/( PRESSED ANGLE ) DISTANCE BAR/( PRESSED ANGLE ) DISTANCE BAR( PRESSED ANGLE )
ED-1000X2100 (ENTRANCE DOOR) GD-1000X2100 ( OUTSIDE ) D-2000X2100 ( OUTSIDE ) D1-900X2100 ( BEDROOMS & STUDY) D2-750X2100 (UTILITY) D2-750X2100 (SERVANT ROOM) D2-750X2100 (TOILET ) FRD - 1250X1900( STAIRCASE CABIN DOOR)
OUTSIDE ELEVATION (ENTRANCE SAFETY GRILL DOOR) (METER ROOM DOOR) OUTSIDE ELEVATION KITCHEN SIDE ELEVATION UTILITY SIDE ELEVATION OUTSIDE ELEVATION INSIDE ELEVATION
BLOCK WALL
BLOCK WALL
INSIDE 50 MM THK PRESSED
OUTSIDE 35 MM THIK. FLUSH DOOR 35 MM THIK. FLUSH DOOR STEEL GALVANIZED DOOR
35 MM THIK PRESSED STEEL
35 MM THIK PRESSED SHUTTER SHUTTER 30 MM THIK FRP DOOR SHUTTER
DOOR SHUTTER OUTSIDE STEEL DOOR SHUTTER SHUTTER
FACTORY MADE HOT DIPPED INSIDE FACTORY MADE HOT DIPPED FACTORY MADE HOT DIPPED
S.S.HINGES S S GRILL AS PER 2000 FACTORY MADE HOT DIPPED FACTORY MADE HOT DIPPED
GALVANIZED PRESSED STEEL GALVANIZED PRESSED STEEL 90X45 MM THIK FRP DOOR GALVANIZED PRESSED
DETAIL GALVANIZED PRESSED STEEL S.S.HINGE GALVANIZED PRESSED STEEL S.S.HINGE
DOOR FRAMES OF A DOOR FRAMES OF
S.S.HINGE
DOOR FRAMES OF DOOR FRAMES OF FRAME S.S.HINGES STEEL DOOR FRAMES OF
140X60X1.60MM 90X50X1.60MM D 90X50X1.60MM 90X50X1.60MM
B 130X60X1.60MM
C
INSIDE UTILITY SER.ROOM INSIDE OUTSIDE
INSIDE
60 OUTSIDE 60 50 OUTSIDE 50 50 KITCHEN 50 50 UTILITY 50 40 OUTSIDE 40 60 INSIDE 60
BLOCK WALL 1000 BLOCK WALL 900 BLOCK WALL 750 BLOCK WALL 750 BLOCK WALL BLOCK WALL
750 1250
PLAN PLAN PLAN PLAN PLAN PLAN PLAN
D2-750X2100 (SERVANT ROOM)
ED-1000X2100 (ENTRANCE DOOR) GD-1000X2100 (ENTRANCE SAFETY GRILL DOOR) D-2000X2100 (METER ROOM DOOR) D1-900X2100 ( BEDROOMS & STUDY ) D2-750X2100(UTILITY) D2-750X2100 (TOILET) FRD-1250X1900 (STAIRCASE CABIN DOOR)
OPENING SIZE ED 1000X2100 OPENING SIZE GD 1000X2100 OPENING SIZE D 2000X2100 OPENING SIZE D1 900X2100 OPENING SIZE D2 750X2100 OPENING SIZE D2 750X2100 OPENING SIZE D2 750X2100 OPENING SIZE FRD 1250X1900
FACTORY MADE HOT SIZE 1000X2130 FACTORY MADE HOT SIZE 1000X2130 SIZE 2000X2130 FACTORY MADE HOT SIZE FACTORY MADE HOT FACTORY MADE HOT SIZE 750X2120 FACTORY MADE HOT DIPPED
GP STEEL DOOR 900X2130 SIZE 750X2130 SIZE 750X2130 90X45 MM THIK FRP SIZE 1250X1930
DIPPED GALVANIZED DIPPED GALVANIZED DIPPED GALVANIZED DIPPED GALVANIZED DIPPED GALVANIZED GALVANIZED PRESSED STEEL
FRAMES DOOR FRAME
PRESSED STEEL DOOR SECTION 140X60x1.60 PRESSED STEEL DOOR SECTION SECTION 50X90X1.25 PRESSED STEEL DOOR PRESSED STEEL DOOR PRESSED STEEL DOOR SECTION 90X45MM DOOR FRAMES OF
SECTION 90X50x1.60 SECTION 130X60x1.60
FRAMES FRAMES FRAMES FRAMES SECTION 90X50x1.60 FRAMES SECTION 90X50x1.60 130X60X1.60MM
DOOR FITTINGS S S 316 GRADE &CP BRASS DOOR FITTINGS DOOR FITTINGS DOOR FITTINGS S S 316 GRADE
DOOR FITTINGS S S 316 GRADE DOOR FITTINGS S S 316 GRADE DOOR FITTINGS S S 316 GRADE DOOR FITTINGS S S 304 GRADE
REBATE 35MM REBATE REBATE REBATE 33MM
REBATE 38MM REBATE 38MM REBATE 38MM REBATE 55MM
S S HINGES ANY DISCREPANCY FOUND WITH RESPECT TO THIS DRAWING IS
SIZE 100X58X1.9 4 NO. S S HINGES SIZE 100X58X1.9 3 NO. HINGES SIZE 100X58X1.9 4 NO. S S HINGES HINGES SIZE 100X58X1.9 3 NO. S S HINGES
I.S.I MARKED SIZE 100X58X1.9 3 NO. S S HINGES S S HINGES 100X58X1.9 TO BE INTIMATED TO CONCERNED ARCHITECT BEFORE EXECUTING
I.S.I MARKED SIZE 100X58X1.9 3 NO. SIZE 100X58X1.9 3 NO. SIZE 4 NO.
I.S.I MARKED I.S.I MARKED I.S.I MARKED
OUTSIDE OUTSIDE OUTSIDE OUTSIDE THE WORK.
OUTSIDE OUTSIDE UTILITY SIDE INSIDE
MORTICE LATCH & LOCK SIZE 100MM CP BRASS 1 NO. ALDROP SIZE 16 mmØ,250 mm LONG 1 NO. MS ALDROP SIZE 16 mmØ,250 mm LONG 1 NO. SLIDING BOLT SIZE 150 MM 1 NO.
CYLINDRICAL BALL LOCK 1 NO.
FOR COL.POSITIONS,ORIENTATION ETC.STRUCTURAL DESIGN/DRAWING
VIEWING LENSE 1 NO. HANDLE SIZE 125 MM 1 NO. MS HANDLE KNOB SIZE 1 NO. KNOB SIZE 1 NO. ALDROP SIZE 16 MM DIA 250 MM LONG 1 NO.
SIZE 125 MM 2 NO. HANDLE SIZE 125 MM 1 NO. SHALL PREVAIL.
DOOR STOPPER Single Legged 1 NO. INSIDE DOOR STOPPER Single Legged 1 NO. HANDLE SIZE 200MM 1 NO.
DOOR STOPPER Single Legged 1 NO. INSIDE INSIDE
SLIDING BOLT SIZE 250 MM 1 NO. DOOR STOPPER Single Legged 1 NO. SERVANT ROOM SIDE OUTSIDE ONLY FIGURED DIMENSIONS SHALL BE FOLLOWED.
ORNAMENTAL BRASS HANDLE SIZE 125 MM 1 NO. INSIDE SLIDING BOLT SIZE 150 MM 1 NO.
INSIDE TOWER BOLT SIZE 250 MM 1 NO. TOWER BOLT SIZE 250 MM 1 NO. HANDLE SIZE 200 MM 1 NO.
HANDLE SIZE 125 MM 1 NO. MS HANDLE SIZE 125 MM 2 NO. HANDLE SIZE 125 MM 1 NO.
INSIDE
TOWER BOLT SIZE 250 MM 1 NO.
CYLINDRICAL BALL LOCK SIZE 125 MM 1 NO. CYLINDRICAL BALL LOCK SIZE 125 MM 1 NO. DOOR CLOSER 1 NO. ALL DIMENSIONS ARE IN MM UNLESS NOTED OTHERWISE.
SLIDING BOLT 910MM X 2040 MM
SIZE 250 MM 1 NO. SS DOOR SHUTTER SIZE 1160 MM X 1845 MM
(SINGLE LEAF) 920MM X 2045 MM BALL LOCK -KNOB 1 NO. 30 MM THIK FRP 50 MM THK PRESSED STEEL
MAGNETIC CATCHER 1 NO. 675 MM X 2040 MM SIZE
TOWER BOLT SIZE 250 MM 1 NO. MS DOOR SHUTTER SIZE 35 MM THIK PRESSED DOOR SHUTTER SIZE GALVANIZED DOOR SHUTTER (SINGLE LEAF)
(DOUBLE LEAF) MAGNETIC CATCHER 1 NO. (SINGLE LEAF)
STEEL DOOR SHUTTER 670 MM X 2045 MM 35 MM THIK PRESSED
S.S SAFETY CHAIN 1 NO. AS PER MANUFACTURE - FINISH 670 MM X 2045 MM
SIZE (SINGLE LEAF) STEEL DOOR SHUTTER
SS STEEL DOOR FRAME & SHUTTER 35 MM THIK PRESSED BOTH SIDES SIZE (SINGLE LEAF) AS PER MANUFACTURE FINISH-POWDER COATED-DOOR FRAME
ORNAMENTAL BRASS HANDLE SIZE 125 MM 1 NO. AS PER MANUFACTURE - FINISH 820MM X 2045 MM BOTH SIDES AS PER MANUFACTURE FRP DOOR FRAME & FRP SHUTTER
MS STEEL DOOR FRAME & SHUTTER STEEL DOOR SHUTTER SIZE & PRESSED STEEL DOOR SHUTTER NO DATE REVISION PROP DEALT CHKD APPD
MAGNETIC CATCHER 1 NO. GD-DESCRIPTION OF FRAME & SHUTTER BOTH SIDES
(SINGLE LEAF) AS PER MANUFACTURE FINISH-POWDER COATED-DOOR FRAME AS PER MANUFACTURE FINISH-POWDER COATED-DOOR FRAME
D-DESCRIPTION OF FRAME & SHUTTER & PRESSED STEEL DOOR SHUTTER & PRESSED STEEL DOOR SHUTTER D2-DESCRIPTION OF FRAME & SHUTTER OWNER : SIGN OF OWNER :
FRD-DESCRIPTION OF FRAME & SHUTTER PROJECT MANAGER
35 MM THIK PRESSED AS PER MANUFACTURE FINISH-POWDER COATED-DOOR FRAME
STEEL DOOR SHUTTER SIZE 900MM X 2040 MM & PRESSED STEEL DOOR SHUTTER D2-DESCRIPTION OF FRAME & SHUTTER D2-DESCRIPTION OF FRAME & SHUTTER AAI,CHENNAI.
BOTH SIDES (SINGLE LEAF)
D1-DESCRIPTION OF FRAME & SHUTTER
AS PER MANUFACTURE - FINISH
PRESSED STEEL DOOR FRAME & PRESSED STEEL DOOR SHUTTER
ED-DESCRIPTION OF FRAME & SHUTTER
35 MM THIK PRESSED SIGNATURE OF AUTHORIZED ARCHITECT:
STEEL DOOR SHUTTER 50 MM THK PRESSED
BLOCK WALL STEEL GALVANIZED DOOR
INSIDE SHUTTER
INSIDE 30 MM THIK FRP 35 MM THIK PRESSED
INSIDE DOOR SHUTTER INSIDE STEEL DOOR SHUTTER
Ar.RAJKUMAR .T. D
CDO, BGSCTPL
38
35

55
50

38
WORKING DRAWING-DOOR DETAILS

35
33
30

130
140

TYPE-D

90
90
SIGNATURE DATE R
CLIENT :
60 AIRPORTS AUTHORITY OF INDIA
DRAWN BY
28.01.2022
VK
60 45 50
OUTSIDE
S S GRILL AS PER DESIGNED &
DETAIL BLOCK WALL CHECKED BY 28.01.2022
OUTSIDE OUTSIDE BLOCK WALL
OUTSIDE BLOCK WALL FRP DOOR FRAME FACTORY MADE HOT TM
FACTORY MADE HOT DIPPED DIPPED GALVANIZED
FACTORY MADE HOT DIPPED 90X45X1.60MM GALVANIZED PRESSED STEEL RECHECKED
15MM THK INTERNAL 15MM THK INTERNAL PRESSED STEEL DOOR 28.01.2022
GALVANIZED PRESSED DOOR FRAMES OF 130X60X1.60MM PLASTERING FRAMES OF 90X50X1.60MM
BY
STEEL DOOR FRAMES OF PLASTERING TDR
140X60X1.60MM APPROVED
BY 28.01.2022
(DETAIL AT-A) (DETAIL AT-B) (DETAIL AT-C) (DETAIL AT-D) TDR
SCALE-1:5 SCALE-1:5 SCALE-1:5 SCALE-1:5
B. G. SHIRKE CONST. TECH. PVT. LTD.
72-76, MUNDHWA, PUNE - 411 036
TEL: 020-26708100 | FAX: 020-26871612 | E-MAIL: [email protected]
SCALE: PROJECT PROPOSED CONSTRUCTION OF AAI RESIDENTIAL QUARTER AT
CHENNAI AIRPORT, CHENNAI
1:30
JOB NO.:
DRG. TITLE: DOOR DETAILS - TYPE-D
04-2019
REV. NO.
DRG_NO. 04-2019/AAI/TYPE-D/S+5/WD/ARCH-06 R0