Item Description Unit Qty Rate Amount

(Ushs) (Ushs)
BILL NO.3

SUMMARY

1 SUBSTRUCTURES 61,884,500

2 R.C. SUPERSTRUCTURES 102,501,000

3 STAIRCASES & BALUSTRADING 12,563,000

4 WALLING 28,788,450

5 ROOF AND RAINWATER DISPOSAL 11,579,500

6 DOORS 12,504,700

7 WINDOWS 4,355,800

8 EXTERNAL FINISHES 23,443,400

9 INTERNAL FINISHES 89,671,800

10 JOINERY FITTINGS 5,555,000

TOTAL BILL NO.3 352,847,150

Page 1
 Rate
(Ushs) Amount
Item Description Unit Qty
labour (Ushs)
only
BILL No. 3
BLOCK TYPE A - 16 UNITS
ELEMENT NO. 1
SUBSTRUCTURES
ALL PROVISIONAL
The work in this element includes all works up
to and including the ground floor slab
A Allow for maintaining and upholding sides of ITEM 1 500,000 500,000
excavation: clear off all fallen material, rubbish
B Allow for keeping the whole of the excavation free ITEM 1 500,000 500,000
C from general
Excavate wateraverage 200mm deep to remove SM
oversite 950 3,500 3,325,000
vegetable top soil; remove from site
D Mass excavation to reduce levels commencing from CM 285 6,500 1,852,500
E stripped
Excavatelevel
for column bases not exceeding 1.5 meters CM 215 6,500 1,397,500
deep from reduced level.
F Ditto but 1.5 - 3m : ditto CM 60 7,000 420,000
G Excavate for foundation trench not exceeding 1.5 CM 185 6,500 1,202,500
meters deep from reduced level.
H Ditto but 1.5 - 3m : ditto CM 32 7,000 224,000
I Extra over excavations for excavating in rock. CM 30 60,000 1,800,000
J Return fill and ram selected excavated material CM 294 6,500 1,911,000
K around
Load andfoundations.
cart away surplus excavated material from CM 483 7,500 3,622,500
L site.
Approved marrum fill to make up levels; well rolled CM 179 7,000 1,253,000
and compacted in layers not exceeding 150mm thick
to 95% MDD to Engineer's approval
M 200mm Thick bed of hand packed stone base, well SM 598 2,500 1,495,000
rolled and compacted.
N 50mm thick stone dust blinding over surfaces of SM 598 1,500 897,000
O hardcore
Insecticide treatment to surfaces of hardcore, top of SM 3,430 500 1,715,000
foundation walling, bottom and sides of excavation.
CONCRETE WORK
PLAIN CONCRETE CLASS 10; 20mm
P AGGREGATE : in
50mm Thick blinding layer under column bases SM 302 2,500 755,000
VIBRATED MASS CONCRETE CLASS 20; 20mm
AGGREGATE : in
Q Strip foundation CM 27 50,000 1,350,000
VIBRATED REINFORCED CONCRETE CLASS
25; 20mm AGGREGATE : in
R Column bases CM 77 50,000 3,850,000
S Columns CM 6 50,000 300,000
T Steps CM 1 50,000 50,000
U Ground beam CM 37 50,000 1,850,000
TOTAL CARRIED TO COLLECTION ###
3/1/1
A 150mm thick ground floor slab SM 598 7,500 4,485,000
STEEL REINFORCEMENT as described
including cutting to length, bending, hoisting
and fixing and including all necessary tying
wire and spacing blocks
MILD STEEL ROUND BARS TO BS 4449
B 8mm Diameter bars KG 15 500 7,500
HIGH TENSILE RIBBED BARS TO BS 4449
C 12mm Diameter bars KG 3,270 500 1,635,000
D 16mm Diameter bars KG ### 500 6,888,500
E 20mm Diameter bars KG 3,117 500 1,558,500
STEEL FABRIC REINFORCEMENT TO BS 4483
as described
F No. A142 Fabric Mesh reinforcement weighing 2.22 SM 598 800 478,400
kg. per square meter fixed in slab
FORMWORK TO
G Vertical sides of column bases SM 65 27,000 1,755,000
H Vertical sides of columns SM 68 27,000 1,836,000
H Vertical sides of ground beams SM 368 27,000 9,936,000
J Risers of steps 75 to 150mm high LM 60 12,000 720,000
K Edges of slabs 75 to 150mm high LM 159 12,000 1,908,000
DAMP PROOF MEMBRANE
L 1000 Gauge polythene sheeting laid on blinded SM 598 200 119,600
hardcore
WALLING
Solid concrete blockwork jointed and pointed
in cement sand (1:3) mortar : with and
including hoop iron wall ties every alternative
course : in
M 200mm Thick walls SM 636 6,000 3,816,000
SUNDRIES
N 20 SWG Hoop Iron wall tie 25mm wide x 450mm NO 392 500 196,000
long cast 75mm into concrete and built into joint of
block
TWO walling
COATS EXTERNAL CEMENT RENDER
(1:4) finished with wood float
O 12mm thick to walls SM 95 4,000 380,000
TWO COATS BLACK BITUMASTIC paint : on
P Rendered walls SM 95 4,000 380,000
TOTAL CARRIED TO COLLECTION ###
COLLECTION
Total brought forward from Page 3/1/1 ###
Total brought forward from Page 3/1/2 ###

TOTAL CARRIED TO SUMMARY ###

3/1/2
 BILL No. 3
BLOCK TYPE A - 16 UNITS
ELEMENT NO.2
R.C. FRAME
CONCRETE WORK
VIBRATED REINFORCED CONCRETE CLASS
25; 20mm AGGREGATE : in
A Columns CM 34 50,000 1,700,000
B Beams, lintels slab and ring beam CM 327 50,000 ###
HOLLOW BLOCK CONSTRUCTION
C 200mm Thick composite suspended slab consisting SM 692 5,450 3,771,400
of reinforced concrete Class 25 in 75mm topping:
125mm wide ribs at 425mm centers: MAXPAN size
300mm long x 300mm wide x 150mm high including
filling 195mm wide ends of composite slabs with
Concrete Class 25
STEEL FABRIC REINFORCEMENT TO BS 4483
as described
D No. A142 Fabric Mesh reinforcement weighing 2.22 SM 1,778 800 1,422,400
kg. per square meter fixed in slab
STEEL REINFORCEMENT as described
including cutting to length, bending, hoisting
and fixing and including all necessary tying
wire and spacing blocks
MILD STEEL ROUND BARS TO BS 4449
E 8mm Diameter bars KG 1,894 500 947,000
HIGH TENSILE RIBBED BARS TO BS 4449
F 10mm Diameter bars KG 3,248 500 1,624,000
G 12mm Diameter bars KG ### 500 6,633,000
H 16mm Diameter bars KG 3,353 500 1,676,500
I 20mm Diameter bars KG 2,217 500 1,108,500
FORMWORK TO:
J Sides and soffittes of beams/lintels and ring beams SM 297 27,000 8,019,000
K Soffittes of suspended slab SM 1,422 27,000 ###
L Vertical sides of columns SM 546 27,000 ###
M Edges of slab 150 - 225mm high LM 477 12,000 5,724,000
 TOTAL CARRIED TO COLLECTION ###
3/2/1
SUNDRIES
N 20 SWG Hoop Iron wall tie 25mm wide x 450mm NO 3,892 100 389,200
long cast 75mm into concrete and built into joint of
block walling
TOTAL CARRIED TO COLLECTION 389,200
COLLECTION
Total brought forward from Page 3/2/1 ###
Total brought forward from Page 3/2/2 389,200
 TOTAL CARRIED TO SUMMARY ###
3/2/2
BILL No. 3
BLOCK TYPE A - 16 UNITS
ELEMENT NO.3
STAIRCASES AND BALUSTRADING
CONCRETE WORK
VIBRATED REINFORCED CONCRETE CLASS 25
(20MM AGGREGATE) IN:
A Staircases CM 10 50,000 500,000
B Beams CM 1 50,000 50,000
C 200mm Thick suspended landings SM 20 10,000 200,000
STEEL REINFORCEMENT as described
including cutting to length, bending, hoisting
and fixing and including all necessary tying
wire and spacing blocks
MILD STEEL ROUND BARS TO BS 4449
D 8mm Diameter bars KG 254 500 127,000
HIGH YIELD RIBBED BARS, TYPE 2 TO BS
E 4449:2005
12mm Diameter bars KG 2,250 500 1,125,000
FORMWORK to:-
F Soffittes of suspended landing SM 20 27,000 540,000
G Sloping soffittes of staircase SM 45 27,000 1,215,000
H Sides of beams SM 11 27,000 297,000
I Risers of steps 150 to 225mm high LM 144 12,000 1,728,000
J Edges of landing 150 - 225mm high LM 29 12,000 348,000
K Open string edge of staircase 350mm (extreme) LM 75 12,000 900,000
including cutting to profile of treads and risers
FINISHES
CEMENT AND SAND (1:4) SCREEDS : finished
to receive floor tiles
L 50mm Thick screed to landing SM 20 4,000 80,000
M Ditto but to treads 275mm wide LM 144 3,000 432,000
N Ditto but to risers 150mm high LM 130 3,000 390,000
SUPPLY AND FIX; 300 x 600 x 10mm THICK
NON SLIP PORCELAIN FLOOR TILES AS " RAK
CERAMICS SUPLIED BY KENGROW
INDUSTRIES" or equal approved: bedded and
jointed in approved adhesive : pointed with
approved coloured cement : as per Architect's
detailed finishes schedule; to
O Landing SM 62 8,500 527,000
P Treads 275mm wide ribbed with anti-slip grooves LM 130 5,000 650,000

TOTAL CARRIED TO COLLECTION 9,109,000

 3/3/1
SUPPLY AND FIX; 300 x 300 x 10mm THICK
NON SLIP CERAMIC FLOOR TILES AS " RAK
CERAMICS SUPLIED BY KENGROW
INDUSTRIES" or equal and approved: bedded
and jointed in approved adhesive : pointed
with approved coloured cement : as per
A Risers 150mm high LM 144 5,000 720,000
B 150 x 20mm Skirting; cut to slope LM 75 5,000 375,000
C 150 x 20mm skirting LM 14 5,000 70,000
INTERNAL LIME PLASTER
First coat of cement lime and sand (1:2:9) :
second coat of cement, lime putty and sand
D (1:1:6) steeltwo
12mm Thick trowelled
coat work to sloping soffittes SM 45 4,000 180,000
E Ditto but soffittes of landing SM 20 4,000 80,000
F Ditto but edges of landing and staircase strings SM 19 4,000 76,000
G Ditto but beams SM 11 4,000 44,000
PREPARE AND APPLY ONE MIST COAT AND
THREE COATS silk vinyl emulsion paint
H internally on: plastered sloping soffittes
Steel trowelled SM 45 2,200 99,000
I Ditto but soffittes of landings SM 20 2,200 44,000
J Ditto but edges of landings and staircase strings SM 19 2,200 41,800
K Ditto but beams SM 11 2,200 24,200
BALUSTRADING
L Supply and fix balustrading 1000mm high LM 30 25,000 750,000
comprising of: 63mm diameter x 1.5mm thick mild
steel hollow section railing; welded to 50mm
diameter x 1.5mm thick mild steel baluster cast into
concrete at 1250mm centers; 25 x 25 x 1.5mm thick
mild steel SHS intermediate rails; 12mm mild steel
square bars and 25 x 2mm thick MS plate cut to
shape and welded onto intermediate rails; all
M painting
Ditto butand decorations: to Architect's detailed
sloping LM 38 25,000 950,000
TOTAL CARRIED TO COLLECTION 3,454,000

COLLECTION
Total carried forward from Page 3/3/1 9,109,000
Total carried forward from Page 3/3/2 3,454,000

TOTAL CARRIED TO SUMMARY ###

3/3/2
 BILL No. 3
BLOCK TYPE A - 16 UNITS
ELEMENT NO.4
WALLING
PRECAST CONCRETE CLASS 20; 20mm
AGGREGATE : finished fair on all exposed
surfaces including bedding and jointing in
cement sand (1:3) mortar
A 275 x 75mm Weathered and throated window cill LM 152 15,000 2,280,000
BLOCK WORK
Solid Concrete blockwork jointed and pointed
in cement sand (1:3) mortar with and including
hoop iron wall ties every alternative course : in
B 200mm Thick walls SM 2,999 6,000 ###
C 150mm Thick walls SM 527 6,000 3,162,000
D 100mm Thick walls SM 173 6,000 1,038,000
DAMP PROOF COURSE OF BITUMEN FELT TO
B.S 743 Type A with 150mm laps including
cement and sand (1:3) levelling bed
E 200mm Wide LM 325 50 16,250
F 150mm Wide LM 58 50 2,900
G 100mm Wide LM 6 50 300
STEEL POSTS
H Allow for fabricating and fixing of corner steel poles LM 16 20,000 320,000
100mm dia,3mm thick 2500mm high at Front
verandah as per approved Architect's detailed
drawing with and including painting applying one
coat of undercoat and two coats of first grade gloss
oil paint to Architect's detailed drawing
BALUSTRADING
I Supply and fix balustrading 1000mm high LM 159 25,000 3,975,000
comprising of: 63mm diameter x 1.5mm thick mild
steel hollow section railing; welded to 50mm
diameter x 1.5mm thick mild steel baluster cast into
concrete at 1250mm centers; 25 x 25 x 1.5mm thick
mild steel SHS intermediate rails; 12mm mild steel
square bars and 25 x 2mm thick MS plate cut to
shape and welded onto intermediate rails; all
painting and decorations: to Architect's detailed

TOTAL CARRIED TO SUMMARY ###

3/4/1
BILL No. 3
 BLOCK TYPE A - 16 UNITS
ELEMENT NO.5
ROOF AND RAINWATER DISPOSAL
Roof Structure
SAWN PRESSURE IMPREGNATED CYPRESS
A GRADE S50 Wall Plate secured to concrete beam at
100 x 75mm LM 168 1,500 252,000
1200mm centres with and including 6mm diameter
mild steel round bar one side cast in beam (m.s)
other fixed to wall plate with tack nails.
B 100 x 50mm purlins LM 516 1,000 516,000
B 100 x 50mm common rafters LM 845 1,000 845,000
The following in trusses with and including
bolted connections and slicing plates.
C 100 x 50mm Rafters LM 434 1,000 434,000
D 150 x 50mm Tie Beam LM 700 1,000 700,000
E 100 x 50mm ties and struts LM 604 1,000 604,000
ROOF COVERING
26 Gauge pre-painted Tile profiled roofing
sheets : fixed to timber purlins with roofing
F nails : laid
Sheet in sloping not exceeding 45 degrees from SM 755 3,500 2,642,500
G horizontal.
300mm Wide ridge LM 60 10,000 600,000
BAT PROOFING
SUPPLY AND INSTALL APPROVED filler blocks
in accordance with manufacturer's
H instructions;
Filler blocks - LM 120 1,000 120,000
RAIN WATER DISPOSAL
PVC Key terrain fixed in accordance with
manufacturer's instructions
I 9 x 225mm high uPVC fascia/barge board fixed to LM 195 3,000 585,000
timber with and including screws.
J UPVC half round rain water gutters, 112mm dia, LM 119 3,000 357,000
slope to 3-5mm per metre secured to plastic fascia
board with and including screwed plastic brackets
at 1000mm centres.
K Extra over gutter for outlet to suit 100mm diameter NO 16 5,000 80,000
L pipe
Extra over gutter for stopped ends NO 14 5,000 70,000
M 100mm diameter PVC down pipe fixed along the LM 120 5,000 600,000
wall with and including brackets.
N Extra over down pipe for bends. NO 32 2,000 64,000
O Extra over down pipe for shoe. NO 16 2,000 32,000

TOTAL CARRIED TO COLLECTION 8,501,500

3/5/1
EAVES TREATMENT
 METAL LATH PLASTER CEILING comprising :
75 x 50mm sawn soft wood framing at 600mm
centres both ways with 100 x 50mm joists at
1800mm centres both ways : metal wire lathing
nailed onto framework : 10mm thick cement
sand mortar on top of lathing including
necessary formwork : 12mm thick internal lime
A Eaves SM 90 32,000 2,880,000
PREPARE AND APPLY ONE MIST COAT AND
THREE FINISHING COATS first grade matt
B emulsion paintlathe
Plastered metal : on ceiling SM 90 2,200 198,000
TOTAL CARRIED TO COLLECTION 3,078,000
COLLECTION
Total brought forward from Page 3/5/1 8,501,500
Total brought forward from Page 3/5/2 3,078,000

TOTAL CARRIED TO SUMMARY ###

3/5/2
 BILL No. 3
BLOCK TYPE A - 16 UNITS
ELEMENT NO. 6
DOORS
METAL WORK
STEEL CASEMENT DOORS
PURPOSE MADE DOOR STANDARD Steel
Section for glazing with putty, permanent
ventilation comprising T-bar hood, standard
transomes and mullions, 300mm high vents at
the top comprising 1.5mm thick mild steel
sheet cranked louvers, 75mm wide bent to
shape and welded to door frame including one
coat red oxide etching primer : ALL iron
A Double Door D1s overall size 2000 x 2400mm high NO 16 20,000 320,000
comprising of 2No. Equal opennable doors size 610
x 2100mm high and 2No. Fixed side panes size 310
x 2100 mm high as per Drawing No.
216-NAALYA/ARC/2.02
STEEL PANELLED DOORS -
PURPOSE MADE DOOR : 40mm Thick Standard -
Steel door and framing complete with and
INCLUDING ALL IRON-MONGERY AND
ACCESSORIES; one coat red oxide primer; ; all
to Architect's detailed drawing
B Door D2s overall size 1500 x 2400mm high NO 2 20,000 40,000
comprising of: 2mm thick mild steel plate; 300mm
high mild steel cranked louvred vents with openable
mosquito wire gauze on coffee tray fixed internally;;
965mm high 5mm thick clear sheet glass and
glazing with putty; with and including Burglar
proofing as per Architect's detailed drawing No.
C Door D3s overall size 900 x 2400mm high ditto NO 16 20,000 320,000
5mm CLEAR SHEET GLASS and glazing as
D described: to in panes 0.1 to 0.5 square meters
Metal casement SM 77 8,000 616,000
TIMBER DOORS
45mm THICK PANELLED MAHOGANY DOOR;
with 2No. Panels to Architect's approval; all to
Architect's detailed drawing No.
216-NAALYA/ARC/2.01
E Door D2t, size 900 x 2100mm high overall NO 16 15,000 240,000
45mm THICK SOLID CORED FLUSH DOORS
faced both sides with mahogany veneer: to
Architect's approval with hardwood lipping all
round; all to Architect's detailed drawing No.
216-NAALYA/ARC/2.01
F Door D4t, size 900 x 2100mm high overall NO 64 15,000 960,000
G Door D3t, size 850 x 2100mm high overall NO 48 15,000 720,000
R
TOTAL CARRIED TO COLLECTION 3,216,000

3/6/1
WROT MAHOGANY FRAMES AND LININGS
selected, treated and kept clean; to Architect's
A detailed drawing
250 x 45mm frame, two labours, plugged LM 517 1,500 775,500
B Ditto transome LM 44 1,500 66,000
C 200 x 45mm frame, two labours, plugged LM 172 1,500 258,000
D Ditto transome LM 14 1,500 21,000
E 80 x 20mm Architrave: moulded LM 1,378 1,500 2,067,000
F 10 x 15mm timber beading LM 154 1,500 231,000
Iron Mongery
Supply and fix the following iron mongery :
locks and furniture where applicable are to be
equal to those manufactured by "UNION" and
approved by the Architect
100mm long pressed brass butt hinges. Prs 192 -
Two lever 'Union' mortice sash lock code No. 2277 NO 112 10,000 1,120,000
complete with matching handles.
Three lever 'Union' mortice sash lock code No. 2277 NO 16 10,000 160,000
complete with matching handles.
25mm diameter rubber door stop plugged and NO 128 -
screwed to concrete floor.
Painting and Decorations
PREPARE AND APPLY THREE Coats
polyurethane clear varnish in accordance with
manufacturer's instructions : on wood : to
G General surfaces SM 474 2,200 1,042,800
H Surfaces 200 - 300mm LM 805 1,000 805,000
I Surfaces not exceeding 100mm girth LM 1,532 1,000 1,532,000
J Prime back of wood before fixing 100-200mm girth LM 689 1,000 689,000
PREPARE SURFACE AND APPLY ETCHING
PRIMER; apply one coat primer, one undercoat
and two Gloss finishing coats; on metal work :
to
K Steel door surfaces SM 237 2,200 521,400

TOTAL CARRIED TO COLLECTION 9,288,700

COLLECTION
Total brought forward from Page 3/6/1 3,216,000
Total brought forward from Page 3/6/2 9,288,700

TOTAL CARRIED TO SUMMARY ###

BILL No. 3
BLOCK TYPE A - 16 UNITS
ELEMENT NO.7
WINDOWS
Curtain goods
 32mm albronze rods with two(2 No.) lines one for
curtains and other for netting complete with wall
brackets (2 No),curtain tie backs(2 No.) matching
A brackets and all necessary connectors and LM 272 1,500 408,000
accessories including decorative end theods
complete with two coats of gloss oil paint ready for
fixing as per architects detailed drawing
METAL WORK
STEEL CASEMENT WINDOW
PURPOSE MADE WINDOW STANDARD Steel
Section for glazing with putty, permanent
ventilation comprising of openable mosquito
wire gauze on coffee tray fixed onto mild steel
SHS framing, standard transomes and
mullions, stays and fasteners, one coat red
oxide etching primer : including 300mm high
vents at the top comprising 1.5mm thick mild
steel sheet cranked louvers, 75mm wide bent to
shape all welded to window frame; ALL
NECCESSARY IRONMONGERY AND
Window W2s Size 1800 x 1500mm high (overall) as
B per Architect's detailed drawing No. NO 64 10,000 640,000
216-NAALYA/ARC/2.03 & 216-NAALYA/ARC/2.05
C Window W4s Size 1200 x 1300mm high (overall) NO 16 10,000 160,000
D ditto
Window W5s Size 800 x 1000mm high (overall) as NO 32 10,000 320,000
per Architect's detailed drawing No.
216-NAALYA/ARC/2.04 & 216-NAALYA/ARC/2.05
STEEL LOUVRED VENT
MILD STEEL LOVERED GABLE VENTS
comprising of 40 x 40 x 2mm mild steel angle
framing; 1.5mm thick mild steel sheet cranked
louvers, 75mm wide bent to shape all welded to
vent frame; with and including one coat red
oxide primer; to Architect's detailed drawing
E Gable Vent size 450 x 600mm high (overall) NO 4 10,000 40,000
PREPARE SURFACE AND APPLY ETCHING
PRIMER; apply one coat primer, one undercoat
and two Gloss finishing coats; on metal work :
to
F General surfaces SM 449 2,200 987,800

TOTAL CARRIED TO COLLECTION 2,555,800

3/7/1
5mm CLEAR SHEET GLASS and glazing as
A described: to in panes 0.1 to 0.5 square meters
Metal casement SM 199 8,000 1,592,000
5mm FROSTED SHEET GLASS and glazing as
B described: to in panes 0.1 to 0.5 square meters
Metal casement SM 26 8,000 208,000
TOTAL CARRIED TO COLLECTION 1,800,000
COLLECTION
Total brought forward from Page 3/7/1 2,555,800
Total brought forward from Page 3/7/2 1,800,000

TOTAL CARRIED TO SUMMARY 4,355,800

3/7/2
BILL No. 3
BLOCK TYPE A - 16 UNITS
ELEMENT NO.8
EXTERNAL FINISHES
WALL FINISHES
CEMENT AND WASHED SAND (1:3) RENDER
trowelled smooth
A 12mm Thick two coat work to walls. SM 1,102 4,000 4,408,000
B Ditto to concrete surfaces SM 705 4,000 2,820,000
PAINTING AND DECORATING
PREPARE AND APPLY THREE COATS first
grade weatherguard emulsion paint :
C externally; on
Rendered surfaces SM 1,807 4,000 7,228,000
D Fairfaced surfaces 200 - 300mm wide LM 152 3,000 456,000
FLOOR FINISHES
CEMENT AND SAND (1:4) SCREED
E 40mm Thick screed; finished to receive tiles SM 152 4,000 608,000
SUPPLY AND FIX; 300 x 300 x 10mm THICK
NON SLIP CERAMIC FLOOR TILES AS " RAK
CERAMICS SUPLIED BY KENGROW
INDUSTRIES" or equal and approved: bedded
and jointed in approved adhesive : pointed
with approved coloured cement : as per
F Floors SM 152 4,000 608,000
G 100 x 10mm skirting LM 173 3,000 519,000
SPLASH APRON
75mm thick concrete class 25/20mm aggregate
splash reinforced with and including fabric mesh
reinforcement ref A98 as before described; finished
H with 25mm thick cement sand screed (1:3) steel SM 98 30,000 2,940,000
trowelled smooth; including all necessary formwork
to Architect's detail drawing No.
216-NAALYA/ARC/2.25
100mm thick walling to sides of splash Apron with
and including foundation concrete; plastering to
I exposed surfaces; necessary excavation and disposal LM 169 6,000 1,014,000
of surplus soil to Architect's detail drawing No. 216-
NAALYA/ARC/2.25
STORMWATER DRAINAGE
200 x 150mm deep (Internally) drainage channel in
concrete Class 25/20mm aggregates finished with
25mm thick cememtn sand screed (1:3 steel
J LM 171 10,000 1,710,000
trowelled smooth with and including excavations;
disposal of surplus soils to Architect's detail drawing
No. 216-NAALYA/ARC/2.25

R
TOTAL CARRIED TO COLLECTION ###

3/8/1
CEILING
INTERNAL LIME PLASTER, FIRST COAT of
cement lime and sand (1:2:9) second coat of
cement, lime putty and sand (1:1:6) steel
trowelled as described
A 12mm Two coat work to soffittes of suspended slabs SM 114 5,000 570,000
 METAL LATH PLASTER CEILING comprising :
75 x 50mm sawn soft wood framing at 600mm
centres both ways with 100 x 50mm joists at
1800mm centres both ways : metal wire lathing
nailed onto framework : 10mm thick cement
sand mortar on top of lathing including
necessary formwork : 12mm thick internal lime
B Ceiling SM 38 6,000 228,000
PREPARE AND APPLY ONE MIST COAT AND
THREE FINISHING COATS first grade matt
C emulsion paintplastered
Steel trowelled : on soffittes. SM 114 2,200 250,800
D Plastered metal lathe ceiling SM 38 2,200 83,600
TOTAL CARRIED TO COLLECTION 1,132,400
COLLECTION
Total brought forward from Page 3/8/1 ###
Total brought forward from Page 3/8/2 1,132,400

TOTAL CARRIED TO SUMMARY ###

3/8/2
BILL No. 3
BLOCK TYPE A - 16 UNITS
ELEMENT NO.9
INTERNAL FINISHES
 WALL FINISHES
CEMENT AND SAND (1:4) SCREEDS FINISHED
to receive wall tiles
A 12mm Thick wall screed to receive tiles SM 593 4,000 2,372,000
INTERNAL LIME PLASTER First coat of cement
lime and sand (1:2:9) second coat of cement,
lime putty and sand (1:1.6) Steel trowelled
smooth
B 12mm Thick two coat work to walls SM 4,442 4,000 ###
C Ditto but to concrete surfaces SM 2,020 4,000 8,080,000
SUPPLY AND FIX; 200 x 300 x 8mm THICK
APPROVED GLAZED CERAMIC WALL TILES:
bedded and jointed in approved adhesive :
pointed with approved coloured cement : as per
Architect's detailed finishes schedule; to
D Wall surfaces SM 593 8,500 5,040,500
E Extra over for rounded top edge. LM 568 1,000 568,000
F Extra over for corner strip LM 456 1,000 456,000
Painting and Decorating
PREPARE AND APPLY ONE MIST COAT AND
THREE COATS silk vinyl emulsion paint
G internally on:
Plastered surfaces SM 6,462 2,200 ###
FLOOR FINISHES
CEMENT SAND (1:4) SCREED
H 40mm Thick screed to receive floor tiles SM 1,569 4,000 6,276,000
SUPPLY AND FIX; 300 x 300 x 10mm THICK
NON SLIP CERAMIC FLOOR TILES AS " RAK
CERAMICS SUPLIED BY KENGROW
INDUSTRIES" or equal approved: bedded and
jointed in approved adhesive : pointed with
approved coloured cement : as per Architect's
I Floors SM 350 8,500 2,975,000
J 100 x 10mm Skirting; with aluminium top edge LM 555 4,000 2,220,000

R
TOTAL CARRIED TO COLLECTION ###

3/9/1
 SUPPLY AND FIX; 400 x 400 x 10mm THICK
CERAMIC FLOOR TILES AS " RAK CERAMICS
SUPLIED BY KENGROW INDUSTRIES" or equal
approved: bedded and jointed in approved
adhesive : pointed with approved coloured
cement : as per Architect's detailed finishes
A Floors SM 1,128 8,500 9,588,000
B 100 x 10mm Skirting; with aluminium top edge LM 1,250 4,000 5,000,000
SUPPLY AND FIX; 300 x 600 x 10mm THICK
NON SLIP PORCELAIN FLOOR TILES AS " RAK
CERAMICS SUPLIED BY KENGROW
INDUSTRIES" or equal approved: bedded and
jointed in approved adhesive : pointed with
approved coloured cement : as per Architect's
detailed finishes schedule; to
C Floors SM 91 8,500 773,500
D 100 x 10mm Skirting; with aluminium top edge LM 49 4,000 196,000
SUNDRIES
E 25 x 3mm Aluminum dividing strip between finishes LM 43 1,000 43,000
CEILING
INTERNAL LIME PLASTER, FIRST COAT of
cement lime and sand (1:2:9) second coat of
cement, lime putty and sand (1:1:6) steel
trowelled as described
F 12mm Two coat work to soffittes of suspended slabs SM 1,424 5,000 7,120,000
METAL LATH PLASTER CEILING comprising :
75 x 50mm sawn soft wood framing at 600mm
centres both ways with 100 x 50mm joists at
1800mm centres both ways : metal wire lathing
nailed onto framework : 10mm thick cement
sand mortar on top of lathing including
necessary formwork : 12mm thick internal lime
G Ceiling SM 475 6,000 2,850,000
PREPARE AND APPLY ONE MIST COAT AND
THREE FINISHING COATS first grade matt
H emulsion paintplastered
Steel trowelled : on soffittes. SM 1,424 2,200 3,132,800
I Plastered metal lathe ceiling SM 453 2,200 996,600

TOTAL CARRIED TO COLLECTION ###

COLLECTION
Total brought forward from Page 3/9/1 ###
Total brought forward from Page 3/9/2 ###

TOTAL CARRIED TO SUMMARY ###

3/9/2
 BILL No. 3
BLOCK TYPE A - 16 UNITS
ELEMENT NO.10
JOINERY FITTINGS
RATES FOR ALL JOINERY WORKS MUST
INCLUDE ALL ACCESSORIES AND FITTINGS;
PAINTING AND DECORATIONS;
IRONMONGERY; AS PER ARCHITECT'S
DETAILED DRAWINGS; THE CONTRACTOR
MUST STUDY THE DRAWINGS AND ENSURE
THAT HIS PRICE INCLUDES ALL ITEMS
REQUIRED ON THE FITTINGS
Wardrobes
Wardrobes Comprising of: 25mm thick MDF
boards shutters, partitions, shelves and
drawers; chrome plated shoe racks, rails and
handles; iron mongery and accessories,
painting and decorations; in accordance with
A 100mm thick Plain in-situ vibrated concrete grade SM 5 23,000 115,000
B 20 in benching
Wardrobe overall size 1800mm long x 600mm wide NO 16 50,000 800,000
C x 2800mm overall
Wardrobe high size 1200mm long x 600mm wide NO 32 30,000 960,000
x 2800mm high
LOW LEVEL KITCHEN UNIT
3000mm long x 600mm wide x 900mm high
comprising of: 100mm thick concrete class 20
benching ; 100mm thick reinforced concrete
worktop lined with 20mm thick black granite ontop
and fascia, 12mm thick painted plaster to soffittes;
D NO 16 100,000 1,600,000
25mm thick hardwood lipped blockboard shelves
with 25 x 25mm hardwood bearers; 25mm thick
hardwood shutters complete with iron mongery and
accessories; all painting and decorations; to
architect's detailed drawing No.
E Ditto but 1800mm NO 16 80,000 1,280,000
HIGH LEVEL KITCHEN UNIT
High level shelves and cabinet size 4290mm long x
300mm wide x 600mm high comprising of: 25mm
thick wrot hardwood shelves 25mm thick x 600mm
G high cabinet shutters; wrot hardwood bearers and NO 16 50,000 800,000
fixing brackets; all iron mongery and accessories;
painting and decorations; to architect's detailed
drawing No. 216-NAALYA/ARC/2.08 - 2.12

TOTAL CARRIED TO SUMMARY 5,555,000

3/10/1