Scribd
Upload
6 views

removal of external q400

This document outlines the procedure for removing external DC electrical power from an aircraft's DC bus, including safety precautions and job setup information. It details the steps to disconnect the external power unit and manage circuit breakers accordingly. The document emphasizes the importance of grounding and following electrical safety measures during maintenance.

Uploaded by

Rakesh Tiwari
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
6 views

removal of external q400

This document outlines the procedure for removing external DC electrical power from an aircraft's DC bus, including safety precautions and job setup information. It details the steps to disconnect the external power unit and manage circuit breakers accordingly. The document emphasizes the importance of grounding and following electrical safety measures during maintenance.

Uploaded by

Rakesh Tiwari
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

D AIRCRAFT MAINTENANCE MANUAL

**ON A/C ALL


TASK 12−00−06−861−802
Removal of the External DC Electrical Power
Refer to Figure 302.
1. General
A. The maintenance procedure that follows is for the removal of the external DC electrical power
from the DC bus of the aircraft.
B. The external DC receptacle for the removal of external DC ground power is on the forward left
side of the aircraft nose section.

2. Job Set−Up Information


Subtask 12−00−06−946−002

A. Reference Information

REFERENCE DESIGNATION
TASK 10−11−00−869−801 Static Grounding of the Aircraft
TASK 24−00−00−910−801 Electrical/Electronic Safety Precautions

3. Job Set−Up
Subtask 12−00−06−869−001

A. Make sure that the aircraft is grounded (Refer to TASK 10−11−00−869−801 ).

Subtask 12−00−06−910−002

B. Obey all the electrical and electronic safety precautions (Refer to TASK 24−00−00−910−801 ).

4. Procedure
Subtask 12−00−06−861−002

WARNING: OBEY ALL THE SAFETY PRECAUTIONS WHEN YOU DO MAINTENANCE ON OR NEAR
ELECTRICAL/ELECTRONIC EQUIPMENT. IF YOU DO NOT DO THIS, YOU CAN CAUSE
INJURIES TO PERSONS AND DAMAGE TO THE EQUIPMENT.
A. Remove the external DC electrical power from the aircraft as follows:
(1) Set EXT PWR switch on the DC CONTROL panel (1) to the OFF position.
(2) Set the BATTERY MASTER , MAIN, AUX and STBY switches to the OFF position.

PSM 1−84−2
EFFECTIVITY:
Page 305
See first effectivity on page 305 of 12−00−06 12−00−06 Sep 05/2021

Print Date: 2025-02-12


D AIRCRAFT MAINTENANCE MANUAL

(3) Stop the DC external−power unit.


CAUTION: STOP THE GROUND POWER UNIT (GPU) BEFORE YOU DISCONNECT THE
GPU CABLE FROM THE EXTERNAL POWER RECEPTACLE. IF YOU DO NOT
DO THIS, THERE CAN BE ELECTRICAL DAMAGE TO THE EXTERNAL
POWER RECEPTACLE AND THE CABLE ASSEMBLY.
(4) Disconnect the cable of the DC external−power unit from the 28 V DC external ground
power receptacle (3) on the aircraft.

5. Close Out
Subtask 12−00−06−865−006

A. If the AC Contactor Box are in the removed condition, do the procedure that follows:
(1) Remove the tags and close the circuit breakers that follow:

CB PANEL AND CB NO NAME


LEFT DC MAIN, D7 AC GEN CONT 1
RIGHT DC (ESSENTIAL), F8 EXT PWR LOGIC
RIGHT DC MAIN, P6 AC GEN CONT 2
RIGHT DC MAIN, Q4 STBY HYD PMP1

(2) Open and tag the circuit breakers that follow:

CB PANEL AND CB NO NAME


RIGHT DC (ESSENTIAL− BATTERY PWR), H3 BATTERY MASTER SW
RIGHT DC (ESSENTIAL− BATTERY PWR), J3 BATTERY MASTER SW
RIGHT DC (ESSENTIAL− BATTERY PWR), K3 BATTERY MASTER SW
RIGHT DC (ESSENTIAL− BATTERY PWR), L3 BATTERY MASTER SW

Subtask 12−00−06−410−002

B. Close the access door that follows:

REFERENCE DESIGNATION
113BL Ground Power Receptacle Door

PSM 1−84−2
EFFECTIVITY:
Page 306
See first effectivity on page 305 of 12−00−06 12−00−06 Sep 05/2021

Print Date: 2025-02-12


D AIRCRAFT MAINTENANCE MANUAL

Subtask 12−00−06−941−002

C. Remove all tools, equipment, and unwanted materials from the work area.

PSM 1−84−2
EFFECTIVITY:
Page 307
See first effectivity on page 305 of 12−00−06 12−00−06 Sep 05/2021

Print Date: 2025-02-12


D AIRCRAFT MAINTENANCE MANUAL

A
LEGEND
1. DC Control panel.
2. DC Bus voltage readout (typical).
B 3. DC Ground power receptacle.

DC CONTROL

OFF OFF OFF OFF

STBY AUX MAIN BATTERY


BATT BATT BATT MASTER

OFF OFF OFF OFF OFF

GEN 1 GEN 2 MAIN BUS BUS FAULT EXT PWR


TIE RESET

DC EXT ELECTRICAL AC EXT


POWER POWER
BATT o APU AC GEN 1
2 LOAD C VOLT LOAD VOLT LOAD
MAIN − X.XX − XX XXX − X.XX A XXX .XX
−
−

− −−

AUX − .XX − XX B XXX .XX


STBY − .XX −XX DC GEN C XXX .XX
1 LOAD 2
DC BUS − X.XX .XX AC GEN 2
−

L VOLT R VOLT LOAD


ESS 28.1 28.1 TRU A XXX .XX
MAIN 28.1 28.1 1 LOAD 2 B XXX .XX
SEC 0.0 0.0 −X.XX −X.XX C XXX .XX C 3
−

PFCS
SPOILERS

LO RUD RI RO
br474a01.dg, sw/gw, may13/2010

LI

L ELEV R ELEV

FWD

B C VIEW ON DOOR OPEN

External DC Electrical Power


Figure 302

PSM 1−84−2
EFFECTIVITY:
Page 308
See first effectivity on page 305 of 12−00−06
12−00−06 Sep 05/2021

Print Date: 2025-02-12

You might also like