Dear customer, thank you for your order.

If you have any problem with our product,

arpuride
please feel free to contact us via our seller
support email, and we will try our best to
solve it for you!
For a multi-language manual, please
contact Carpuride support! BMW Wonder Wheel
Email: [email protected]
Control Manual

Power button:
After booting:
Short press once to display the volume bar
(do not press for a long time to avoid
shutting down)
Long press and hold to power ON/OFF
Screen off status
Press briefly to turn on the screen

SD Card:
Designed to be waterproof,
requires the use of a tool to
Connect For Original BMW open and insert the TF card.
motorcycle navigation base
 1: Left Turn Signal.
BMW Installation: 2: Right Turn Signal
3: When this icon is lights on, it means the original BMW motorbike
wonder wheel and the machine can be connected for normal use.
When this icon is lights out , it means that the original BMW motorbike
wonder wheel is not controlling the machine.
4: Time.
5: Surrounding temperature.
6: Hand brake Prompt.
7: Foot brake Prompt.
8: Motorbike Engine Water Temperature.
9: Motorbike Engine Water Temperature Warning.
10: Motorbike fuel tank oil level.
1 2 3 11: Motorbike fuel tank oil level warning.
You must have an original Follow step 1 and install The installation is 12: Motorbike battery voltage.
BMW navigation base. it on the original BMW complete 13: Motorbike Front Tire Pressure Value.
Install the BMW bracket navigation base together. and can be used. 14: Motorbike Rear Tire Pressure Value.
to the motorcycle carplay
15: Motorbike Gear Level.
screen.
16: Motorbike total mileage display.
17: Motorbike subtotal mileage display.
18: Motorbike speed display.
Main Interface: 19: Motorbike information details prompt.
20: Main interface icon switch.
1 3 2 21: Motorcycle Engine RPM Display.
4 5
8
6 7
7 9
1 6
8
21
18 2
ODO 8000 km 5
10 11 3 4
17 12
16
13 14
15
20 19

1 2
1: Display Motorbike Engine Water Temperature.
2: Display Motorbike Total Mileage . Operation of the BMW Wonder Wheel Controller
3: Display Motorbike Front Tire Pressure Value.
4: Display Motorbike Rear Tire Pressure Value. Connected to the Machine:
5: Display Motorbike Voltage.
6: Display Motorbike Range Values. Fig 1: Fig 2:
7: Switch Between Day and Night Mode. 1
8: Autosensor icon. 1
BMW Motorbike Wonder Wheel Control
Functional Operation Introduction:

K6 Instructions for entering and exiting the connection:

K3

1: When the machine is mounted on the base of a BMW motorcycle,

K7
K1 1 and 2 will appear on the left side of the motorcycle's instrument display,
K2 as shown in the picture on the left.
K5
2: After pressing K6 button for 5 seconds, the “TFT-NAV”indicator on the
K4
upper left corner of the motorcycle's instrument display will be changed
from a lit TFT to lit NAV. Release the K6 button and press the K6 button
briefly again.
Return button; short press to the left, long press for 3
K1 3: After completing steps 1 and 2, when the “BMW-NAV” icon appears in
seconds for long press function.
the upper left corner of the machine's screen display, it means that the
Confirmation button; short press to the right, long press
K2
for 3 seconds for long press function. machine and the motorcycle Wonder Wheel Controller are successfully
connected. as Fig. 2.
K3 Left press button; turn outward. 4: After completing steps 3, press K7 button briefly, the machine will
automatically exit the connection to the motorcycle Wonder Wheel
K4 Right Press button; turn inward. Controller. The 'BMW-NAV' indicator icon in the upper left corner of the
Up and down press button; Short press down, confirm up, machine's screen display will disappear.
K5
Long press down, confirm down.
K6 Menu navigation confirmation button, press down to operate

K7 Menu navigation selector button, press down to operate.

3 4
Functional operation of machine buttons:
Meter Interface Turn K4 and move the cursor to the right to select the desired APP.
Buttons Mode Function Main Interface Turn K4 and move the cursor to the right to select the desired APP.

Meter Interface Press K1 briefly to return to the previous interface of the meter. CAR PLAY Turn K4 and move the cursor to the right to select the desired APP.
Main Interface Short press K1 to return to the meter interface.
Short press K1 to return to the previous application interface,
K4 A-AUTO Turn K4 and move the cursor to the right to select the desired APP.
CAR PLAY
long press to return to the main interface. Incoming call is hang-up Turn K4 and select next song when music. Call log pop-up window
Short press K1, return to previous application interface, long press BT to select call log downwards.
A-AUTO to return to main interface. Incoming call is hang-up Turn K4 to select the previous song when music is on. sd playlist
K1 Short press K1, return to main interface when music, hang up
SD
for list down selection.
BT when call, cancel call record pop-up window.
When there is no cursor prompt, short press K5 to start the UI
Short press K1, return to main interface. Cancel SD playlist pop-up Meter Interface cursor prompt function.(Cursor start time is 5 seconds, after 5
SD
window. seconds, the cursor prompt function will be exited automatically.)
Compass Press K1 briefly to return to main interface. When there is no cursor prompt, short press K5 to start the UI c
Setting Press K1 briefly to return to the main interface. Main Interface ursor prompt function.(Cursor start time is 5 seconds, after 5
Audio Output Press K1 briefly to return to the main interface. seconds, the cursor prompt function will be exited automatically.)
Meter Interface Short press K2 to confirm and enter the APP selected by the cursor. K5 CAR PLAY
Short press K5, move the cursor up and down to select the desired
APP. Short press is up, long press is down.
Short press K2 to confirm and enter the APP selected by the
Main Interface Short press K5, BT communication mode, 10 recent call records
cursor.select it when calling and confirm to answer. A-AUTO
will pop up.
Short press K2 to confirm and enter the APP selected by the
CAR PLAY Short press K5, BT communication mode, 10 recent call records
K2 cursor.select it when calling and confirm to answer. BT will pop up.
A-AUTO Short press K2 to confirm and enter the APP selected by the cursor. Short press K5, in SD play mode, it will pop up SD card playlist
SD
Short press K2, play/pause for music, answer for call, confirm for content.
BT call log popup.
SD Short press K2, play/pause for music, confirm play in SD playlist. In all modes: When the motorcycle turns on the left turn signal or right
Meter Interface Turn K3 and move the cursor to the left to select the desired APP. turn signal, short press K5 will cancel the left turn signal or right turn
Main Interface Turn K3 and move the cursor to the left to select the desired APP. signal function.(Please note that short press K5 again will turn on the
CAR PLAY Turn K3 and move the cursor to the left to select the desired APP. left or right turn signal function)

K3 A-AUTO Turn K3 and move the cursor to the left to select the desired APP.
Turn K3 and select the previous song when music. Call log pop-up
BT window when up to select call log.
Turn K3 and select the last song when music. sd playlist for list up
SD
to select

5 6
 Volume adjustment operation:
1

4
5
6

The picture shows is SD card playlist. When playing the contents of the 2 3
SD card, short press K5 will appeare list, and short press K1 again to
1: When you want to control the functions of the machine through the
exit the list.
original motorcycle Wonder Wheel Controller , the “BMW-NAV” icon on
the left side of the machine must be lit, otherwise it cannot be realized.
2: As shown in Figure, the volume and brightness can be adjusted when
no cursor indication appears in the area of 2 .3. Volume and brightness
cannot be adjusted when a cursor indication appears. When there is a
cursor indication, you need to wait about 5 seconds will automatically
exit the cursor indication.
3: When the above 1 .2 conditions are met.turn the K3 and K4 buttons of
the original motorcycle Wonder Wheel controller,the volume bar will
appear on the machine, as shown in the volume bar in Figure. Turning
the K3 button outward will increase the volume, and turning it by one
frame will increase the volume by one level.Turning the K4 button inward
will decrease the volume, and turning it by one frame will decrease the
volume by one level.
The picture shows is BT call list. In BT call mode, the list can be popped 4: Long press or short press K5 button to realize the selection of Media,
up by short press K5,and short press K1 again to exit the list. Voice, mic volume.
5: The function of volume adjustment can only be realized in two
interfaces, the meter interface and the main interface. It cannot be
realized in other interfaces.

7 8
 5: Automatic and Manual Brightness Adjustment: When the brightness
Brightness adjustment operation: adjustment display bar appears on the machine, press the K2 button
briefly to adjust the brightness manually. Short press the K2 button
1 again to turn off the manual brightness adjustment. That is to turn on
the function of automatic brightness adjustment.
4 6: The function of brightness adjustment can only be realized in two
5 interfaces, the meter interface and the main interface. It cannot be
realized in other interfaces.

Warm reminder: due to the operation is complexity , if you have any

problems in the operation and use of the process, please feel free to
contact us via our Carpuride support!
Email: [email protected]
2 3
1: When you want to control the functions of the machine through the
original motorcycle Wonder Wheel Controller , the “BMW-NAV” icon on
the left side of the machine must be lit, otherwise it cannot be realized.
2: As shown in Figure, the volume and brightness can be adjusted when
no cursor indication appears in the area of 2 .3. Volume and brightness
cannot be adjusted when a cursor indication appears. When there is a
cursor indication, you need to wait about 5 seconds will automatically
exit the cursor indication.
3: When the above 1 .2 conditions are met.Short press the K2 button
of the original motorcycle Wonder Wheel controller, the brightness
adjustment bar will appear on the machine, as shown in Figure
indication 4. Turn the K3 button, the brightness will increase, turn one
frame, the brightness will increase by one level; turn the K4 button, the
brightness will decrease, turn one frame, the brightness will decrease
by one level.
4: Exiting and Entering Brightness Adjustment: When the machine
meets the 1. 2 conditions, pressing the K2 button briefly will enter the
brightness adjustment. Pressing the K1 button briefly will exit the
brightness adjustment.

9 10