References

References:
1- F. Javier Cañavate Avila and Xavier Colom Fajula, " Study of
compatibilization methods for High Density Polyethylene and Ground
Tyre Rubber ", Polytechnical University of Catalonia Chemical
Engineering Department, 2009.
2- S. Ramarad , M. Khalid , C.T. Ratnam , A. Luqman Chuah and W.
Rashmi,"Waste tire rubber in polymer blends: A review on the evolution,
properties and future", Elsevier Ltd, Progress in Materials Science,Vol.72,
pp.100-140, 2015.
3- Xavier Colom, Xavier Cañavate, Pilar Casas and Fernando Carrillo,
"New Routes to Recycle Scrap Tires", Nanocomposites with Unique
Properties and Applications in Medicine and Industry, ISBN: 978-953-307-
351-4, 2011.
4- Jinlong Zhang ,Hongxiang Chen, Yu Zhou, Changmei Ke and Huizhen
Lu, " Compatibility of waste rubber powder/polystyrene blends by the
addition of styrene grafted styrene butadiene rubber copolymer: effect on
morphology and properties", Springer, Polym Bull, Vol. 70, pp.2829-
2841, 2013.
5- E. Lievana and J. Karger-Kocsis, " Use of Ground Tyre
Rubber (GTR) in Thermoplastic Polyolefin Elastomer
Compositions ", Progress in Rubber, Plastics and Recycling
Technology, Vol. 20, No. 1, 2004.
6- Jian Zhu, Xinxing Zhang, Mei Liang, and Canhui Lu, "Enhancement of
processability and foamability of ground tire rubber powder and LDPE
blends through solid state shear milling", Springer Science+Business
Media, Journal Polymer Research, Vol. 18, pp. 533–539, 2011.

7- C. Radhesh Kumar, I. Fuhrmann and J. Karger-Kocsis," LDPE-based

thermoplastic elastomers containing ground tire rubber with and without

108
 References

dynamic curing",Elsevier Science Ltd, Polymer Degradation and

Stability,Vol.76, pp.137-144, 2002.

8- E. Manchon-Vizuete, A. Macıas-Garcıa, A. Nadal Gisbert,

C. Fern andez-Gonz alez and V. Gomez-Serrano, "Preparation of
mesoporous and macroporous materials from rubber of tyres
wastes", Elsevier, Microporous and Mesoporous Materials,Vol. 67, pp.35-
41, 2004.
9- J. Cañavate, P. Casas, F. Nogués, F. Carrillo and X. Colom,
"Composites from ground tyre rubber : effect of surface modified by
wetting additives", Department of Chemical Engineering, Technical
University of Catalonia, Barcelona, Spain, 2005.
10- X. Colom, J. Cañavate , F. Carrillo, J.I. Velasco, P. Pagès ,R. Mujal

and F. Nogués," Structural and mechanical studies on modified reused

tyres composites", Elsevier Ltd, European Polymer Journal ,Vol.
42 ,pp.2369–2378,2006.
11- Charoen Nakason, Krungjit Nuansomsri, AzizonKaesaman,and Suda
Kiatkamjornwong,"Dynamic vulcanization of natural rubber/high-
density polyethylene blends: Effect of compatibilization, blend ratio and
curing system", Elsevier ,polymer Testing,Vol.25,pp.782-796,2006.
12- JinK uk Kim, Sung HyoLee and Maridass Balasubramanian,
"Acomparative Study of Effect of Compatibilization Agent on Untreated
and Ultrasonically Treated Waste Ground Rubber Tire and polyolefin
Blends", Research Institute of Industrial Technology, Gyeongsang
National University,Vol. 16, pp. 263-268, 2006.
13- R. Sonnier, E. Leroy, L. Clerc, A. Bergeret and J.M. Lopez-Cuesta,
"Compatibilisation of polyethylene/ground tyre rubber blends by
irradiation", Elsevier Ltd, Polymer Degradation and Stability, Vol. 91,pp.
2375-2379, 2006.

109
 References

14- X. Colom, F. Carrillo and J. Can˜avate," Composites reinforced with

reused tyres: Surface oxidant treatment to improve the interfacial
compatibility", Elsevier Ltd, Composites: Part A 38 ,pp.44-50,2007.
15- R. Sonnier, E. Leroy, L. Clerc, A. Bergeret and J.M. Lopez-Cuesta,"
Polyethylene/ground tyre rubber blends: Influence of particle
morphology and oxidation on mechanical properties", Elsevier Ltd,
Polymer Testing 26, pp.274–281,2007.
16- R. Sonnier, E. Leroy, L. Clerc, A. Bergeret, J.-M. Lopez-Cuesta, A.-S.
Bretelle and P. Ienny, "Compatibilizing thermoplastic/ground tyre rubber
powder blends: Efficiency and limits", Elsevier, Polymer Testing, Vol.
27,pp. 901–907, 2008.
17- Jun Qin, Hua Ding, Xing Wang, Meiju Xie and Zili Yu "Blending
LLDPE and Ground Rubber Tires", Polymer-Plastics Technology and
Engineering, Vol.47, pp. 199–202, 2008.
18- S.M. Egodage, J.F. Harper and S. Walpalage," The development of
rubber-thermoplastic blends from ground tyre rubber and waste
polypropylene", J.Natn. Sci. Foundation Sri Lanka ,Vol.37(2),pp.117-123,
2009.
19- Zdenek Hrdlicka, Antonin Kuta and Jiri Hajek, " Thermoplastic
elastomer blends based on waste rubber and low-density polyethylene",
Institute of Chemical Technology, Prague, polimery, Vol. 55, pp.11-
12,2010.
20- Alexander Fainleib, Olga Grigoryeva, Boulos Youssef and Jean-Marc
Saiter, " Utilization of tire rubber and recycled polyolefins into
thermoplastic elastomers ", Transworld Research Network, Recent
Developments in Polymer Recycling, pp.1-46, 2011.

21- Laszlo Meszarosn, Tamas Barany and Tibor Czvikovszky," EB-

promoted recycling of waste tire rubber with polyolefins ", Elsevier Ltd,
Radiation Physics and Chemistry, Vol. 81, pp. 1357–1360, 2012.

110
 References

22- Olga Grigoryeva, Olga Starostenko, Alexander Fainleib, Gonzalo

Martínez-Barrera,Jean-Marc Saiter and Boulos Youssef , "Joint Reuse Of
Post-Consumer Polyolefins and Ground Tire Rubber For
Thermoplastic Elastomers Production. Mechanical Perfomaance,
Thermal and Radiation Stability", Chemistry & Chemical Technology,
Vol. 6, No.1, 2012.

23- Ziyad T. Al-Malki, Einas A. Al-Nasir, Moayad N. Khalaf and Raed

K. Zidan," Study the Effect of Recycled Tire Rubber on the Mechanical
and Rheological Properties of TPV (HDPE/Recycled Tire Rubber)",
Scientific Research, Journal of Polymer Chemistry, Vol.3, pp.99-103, 2013.
24- Adel Ramezani Kakroodi and Denis Rodrigue, "Degradation behavior
of maleated polyethylene/ground tire rubber thermoplastic elastomers
with and without stabilizer", Elsevier, Polymer Degradation and
Stability ,Vol.98,pp.2184-2192 ,2013.
25- X Colom, J Can˜avate, F Carrillo and MJ Lis, " Acoustic and
mechanical properties of recycled polyvinyl chloride/ground tyre rubber
composites", Journal of Composite Materials, Vol. 48(9) ,pp.1061–
1069 ,2014.
26- Chong-Qing Wang, Hui Wang and You-Nian Liu, "Separation of
polyethylene terephthalate from municipal waste plastics by froth
flotation for recycling industry", Elsevier Ltd, Waste Management,
Vol.35, pp. 42–47, 2015.

27-Adil Koç, "Studying the Utilization of Plastic Waste by Chemical

Recycling Method", scientific research, Open Journal of Applied Sciences,
Vol. 3, pp. 413-420, 2013.

28- Shailendra mudgal, Lorcan Lyons and Mary Ann Kong, "Study on an
Increased Mechanical Recycling Target for Plastics", BIO intelligence
service, plastic recyclers Europe, 2013.

111
 References

29- Anna Frane, Asa Stenmarck, Stefán Gíslason, Kari-Anne Lyng, Soren
Lokke, Malin zu Castell-Rudenhausen and Margareta Wahlstrom,
"Collection & recycling of plastic waste", Nordic Council of Ministers,
2014.

30-Richard Waite, "Household Waste Recycling", Tylor and Francis,

USA, New York, 1995.

31- S.M. Al-Salem , P. Lettieri and J. Baeyens, " Recycling and recovery
routes of plastic solid waste (PSW): A review ", Elsevier Ltd, Waste
Management, Vol. 29, pp. 2625–2643, 2009.

32- Jefferson Hopewell, Robert Dvorak and Edward Kosior, " Plastics
recycling: challenges and opportunities ", Philosophical Transactions,
The Royal Society B, Vol. 364, pp. 2115–2126, 2009.

33- Dimitris S. Achilias, Lefteris Andriotis, Ioannis A. Koutsidis, Dimitra

A. Louka, Nikolaos P. Nianias, Panoraia Siafaka, Ioannis Tsagkalias and
Georgia Tsintzou, " Recent Advances in the Chemical Recycling of
Polymers (PP, PS, LDPE, HDPE, PVC, PC, Nylon, PMMA) " Laboratory
of Organic Chemical Technology, Department of Chemistry, Aristotle
University of Thessaloniki, Thessaloniki Greece, 2012.

34- Andrew ciesielski, " An Introduction to Rubber Technology ", Rapra

Technology LTD, shawbury, shrewsbury, shropshire, UK, 1999.

35- Drobny J. G., “Handbook of Thermoplastic Elastomers”, Czech

Republic May, 2007.

36- J. Karger-Kocsis, L. Me´sza´ros and T. Ba´ra´ny, " Ground tyre

rubber (GTR) in thermoplastics, thermosets, and
rubbers ", Springer Science+Business Media, J Mater Sci, Vol. 48, pp.
1–38, 2013.

112
 References

37-Wail Maged Aljaaidi, Hamad Mohammad Almohanna and

Abdulrahman Zaid Bin Jumah, "Used Tires Recycling and Utilization in
Saudi Arabia", King Saud University, College of Engineering, Chemical
Engineering Dept, 2013.

38- Marvin Myhre, Sitisaiyidah Saiwari, Wilma Dierkes and Jacques

Noordermeer, "Rubber Recycling: Chemistry, Processing, And
Applications", Rubber chemistry and technology, Vol.85, No. 3, pp. 408 –
449, 2012.

39- Sadhan K. De, Avraam Isayev and Klementina Khait, "Rubber

Recycling", Taylor and Francis Group, pp. 528, 2005.

40- Junan Shen and Serji Amirkhanian, " The influence of crumb rubber
modifier (CRM) microstructures on the high temperature properties of
CRM binders ", Taylor & Francis, The International Journal of Pavement
Engineering, Vol.6, No.4, pp.265–271, 2005.

41- Paola Bandini, "Rubberized Asphalt Concrete Pavements in New

Mexico", Department of Civil Engineering, New Mexico State University,

2011.

42- Yves Grohens, Kishor Kumar Sadasivuni, and Abderrahim Boudenne,

"Recycling and Reuse of Materials and Their Products", Taylor and
Francis Group, Advances in Materials Science, pp. 262, 2013.

43- George B. way P.E, Kamil E. Kaloush and Krishna prapoorna Biligiri,
" Asphalt-Rubber Standard Practice Guide", the rubber pavements
association, 2011.

44- Autar K. Kaw, " Mechanics of composite materials" , second edition,

Taylor & Francis Group, 2006.

113
 References

45- Donald, R., Askelane, W., Phule and P.P, " The Science Engineering
of Materials" , 4th ed, John Wiley, New York, 2003.

46- Koloor S. S. R. " Damage mechanics of composite laminates

subjected to cyclic flexural load ", University Tech. of Malaysia, pp. 24-
32, 2009.
47- Bryan Harris, " Engineering Composite Materials ", The Institute of
Materials, London, 1999.

48- Amit K Naskar, Dipak Khastgir, Anil K. Bhowmick, and Sadhan

Kumar De, " Effect of chlorination of ground rubber tire on its
compatibility with poly(vinyl chloride): Dielectric studies", Journal of
Applied Polymer Science, Vol. 84, No. 5, pp. 993–1000, 2002.

49- NIIR Board of Consultants and Engineers, " The Complete Book on
Rubber Processing and Compounding Technology", National Institute Of
Industrial Research, 2010.

50- Yassin A. Aggour, Ayied S. Al-Shihri and Mohamed R. Bazzet,

"Chemical Modification of Scraped Tires through Grafting with 2
Acrylamido-2-methylpropansulfonic Acid", Scientific Research, Open
Journal of Polymer Chemistry, Vol.3, pp.48-53, 2013.

51- I. Fuhrmann and J. Karger-Kocsis, " Photoinitiated Grafting of

Glycidyl Methacrylate and Methacrylic Acid on Ground Tire Rubber ",
Wiley Periodicals, Journal of Applied Polymer Science, Vol. 89, pp.1622–
1630 , 2003.

52- J.J. Yu and S. H. Ryu, " Ultraviolet-initiated photografting of glycidyl

methacrylate onto styrene–butadiene rubber ", Journal of Applied
Polymer Science, Vol.73, No.9, pp. 1733–1739, 1999.

114
 References

53- Sung Hyo Lee, A. M. Shanmugharaj, V. Sridhar, Zhen Xiu Zhang and
Jin Kuk Kim, " Preparation and characterization of polypropylene and
waste tire powder modified by allylamine blends ", Polymers for
Advanced Technologies, Vol. 20, No. 7, pp. 620–625, 2009.
54- Alexander Tolstov, Olga Grigoryeva, Alexander Fainleib, Inna
Danilenko, Anna Spanoudaki, Policarpos Pissis and Jean Grenet, "
Reactive Compatibilization of Polyethylene/Ground Tire Rubber
Inhomogeneous Blends via Interactions of Pre-Functionalized
Polymers in Interface ", Macromolecular Symposia, Reactive
Polymers in Inhomogeneous Systems, in Melts, and at Interfaces Vol.
254, No. 1, pp. 226–232, 2007.
55- William D. Callister and Jr, " Fundamentals of Materials Science
and Engineering ", Department of Metallurgical Engineering, The

University of Utah, John Wiley & Sons, 2001.

56- William F. Hosford, " Mechanical Behavior of Materials",
Cambridge University Press, pp. 425, 2005.
57- William D. Callister and Jr.,"Materials Science and Engineering
an introduction ", John Wiley and sons, 2003.
58- Brian C. Smith, " Fundamentals of Fourier Transform Infrared
Spectroscopy ", Second Edition, Taylor and Francis Group, CRC
Press, 2011.
59- Braun, H. Cherdron, M. Rehahn, H. Ritter, B. Voit, " Polymer
Synthesis Theory and Practice", Springer-Verlag Berlin Heidelberg
(2005).

60-Pooria Gill, Tahereh Tohidi Moghadam, and Bijan Ranjbar,

"Differential Scanning Calorimetry Techniques: Applications in Biology
and Nanoscience", Journal of Biomolecular Techniques, Vol. 21, pp.67–
193, 2010.

115
 References

61- Buthaina A. Ibrahim and Karrer M.Kadum, " Influence of

Polymer Blending on Mechanical and Thermal
Properties ", University of Technology, Baghdad, Iraq, Modern
Applied Science, Vol. 4, No. 9, 2010.

62-Namita Roy Choudhury, Prajna and Naba K Dutta, "Thermal Analysis

of Rubbers and Rubbery Materials", Smithers Rapra Technology Ltd,
2010.

63-Weilie Zhou, and Zhong Lin Wang , "Scanning Microscopy for

Nanotechnology: Techniques and Applications ", Springer Science &
Business Media, 2007.

64-Joseph Goldstein, Dale E. Newbury, David C. Joy, Charles E.

Lyman, Patrick Echlin, Eric Lifshin, Linda Sawyer and J.R. Michael, "
Scanning Electron Microscopy and X-ray Microanalysis ", Third Edition,
Springer Science & Business Media, 2012.

65-Barbara Stuart, "Infrared Spectroscopy: Fundamentals and

Applications", John Wiley and Sons, Analytical Techniques In The
Sciences, 2004.

66- J.V. Gulmine, P.R. Janissek, H.M. Heise and L. Akcelrud,

"Polyethylene characterization by FTIR", Elsevier Science Ltd, Polymer
Testing, Vol.21, pp.557–563, 2002.

67- D. R. Askeland and P. P. Fulay ,"Essential of materials science and

Engineering", Second Edition, cengage Learning, 2010.

68- Donald V. Rosato, Marlene G. Rosato and Nick R. Schott, "Plastics

Technology Hand Book", Momentum Press, LLC Taiwan, Vol.1, 2010.

116
 References

69- Donald, R., Askelane, W., Phule and P.P., "The Science Engineering
of Materials", 4th ed., John Wiley, New York, 2003.

70- James E. Mark, "Polymer Data Handbook", University of Cincinnati

October, 1998.

71-Sachin Kumar, Achyut K. Panda a, R.K. Singh, " A review on tertiary

recycling of high-density polyethylene to fuel", Resources, Conservation
and Recycling,Vol.55, pp.893-910, 2011.

72-Manas Chanda and Salil K. Roy," Plastics Technology Handbook,

Fourth Edition", Plastics engineering, Taylor & Francis Group, 2006.

73- Radivoj Popović, Dragan Milenković, Ružica Popović and

Milenko Plavšić, "Properties of natural rubber/carboxilated styrene-
butadiene latices blends" , Scientific Technical Review, Vol.LV,
No.3-4, 2005.

74- A.J. Marzocca , A.L. Rodrı´guez Garraza and M.A. Mansilla,

"Evaluation of the polymer–solvent interaction parameter c for the
system cured polybutadiene rubber and toluene", Polymer Testing
Vol.29, pp.119–126, 2010.

75- Roff and Scott,"Fibers, Films, Plastics and Rubbers", First edition,
London Butter Worths, 1971.

76- M.O.W Richardson, "Polymer Engineering Composite", Applied

science publishers LTD, London, 1977.

77- William. D. Callister, "Materials science & Engineering an

Introduction", Jown Wiley& Sons , Inc, 6th Ed, 2003.

117
References

118