Scribd
Upload
26 views

LHS-100 TDS

LHS-100 is a polyether polyol modified with SAN polymer, featuring a solid content of approximately 45% and low viscosity, suitable for producing high-loadbearing slabstock foams. Key properties include a hydroxyl number of 28.0-32.0 mg KOH/g and a moisture content of less than 0.08%. It should be stored in moisture-tight containers at 10-35℃ and has a shelf life of 12 months.

Uploaded by

judy.pangs01
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
26 views

LHS-100 TDS

LHS-100 is a polyether polyol modified with SAN polymer, featuring a solid content of approximately 45% and low viscosity, suitable for producing high-loadbearing slabstock foams. Key properties include a hydroxyl number of 28.0-32.0 mg KOH/g and a moisture content of less than 0.08%. It should be stored in moisture-tight containers at 10-35℃ and has a shelf life of 12 months.

Uploaded by

judy.pangs01
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

NINGBO PANGS CHEM CO., LTD.

FLOOR 21, BUILDING NO.11, XINTIANDI, NO.689 SHIJI ROAD, NINGBO, CHINA

COPOLYMER POLYOL LHS-100


General Properties and Applications
LHS-100 is an inactive polyether polyol modified with a styrene-acrylonitrile (SAN) polymer with a
solid content of approx 45% by weight. It effectively combines a high solid content with low viscosity.
LHS-100 can also be used for the production of conventional slabstock foams with very high
loadbearing properties.

Sampling Moisture access must be prevented when taking product samples.

Data
Property Value Unit of measurement Method
Hydroxyl number 28.0-32.0 mg KOH/g GB/T12008.3-2009
Moisture ≦0.08 % by wt. GB/T22313-2008
Viscosity 25℃ 3000-4000 mPa.s GB/T12008.7-2010
Solid conten 43-47 % by wt. Q/0322SLH003-2017
Appearance White to off-white ---------------------------- Visual

Handling Precautions
Flash point is above 200℃(open cup method),flammable but non-explosive. In case of fire, put out with
foams, dry powder, steam or water.
When handling polyols, avoid exposure to eyes or prolong contact with the skin. If eye contact occurs,
flush with plenty of water. If skin contact occurs, wash exposed areas thoroughly with soap and water.

STORAGE
Recommended storage temperature (℃):10-35
Shelf life (ex works)
12 months if stored in sealed, moisture-tight containers.
Partially used containers should be tightly resealed due to the hygroscopic nature of the product.
Recommended temperature for processing (℃):20-25.

You might also like