DisableBitlockerEncryption
DisableBitlockerEncryption
| Step-by-
step Instructions
ManageEngine, [email protected]
5–6 minutes
If Bitlocker encryption is enabled, the storage location of the content present in the encrypted drive of the
imaging computer cannot be identified. Hence, decrypting the contents of the bitlocker encrypted drive is
essential for efficient imaging.
You can use the following methods to remove bitlocker encryption in Windows 10, Windows 11, and all
other Windows operating systems:
1. Through Windows Command Prompt
2. Through Windows GUI mode
3. Through Windows Power shell mode
4. If the result is "Percentage Encrypted : 100.0%", decrypt the BitLocker for the required drives
using the commands given below.
manage-bde -off <drive letter>:
E.g.: manage-bde -off C:
5. Check the BitLocker status after disabling using the command (manage-bde -status) and ensure
that the "Percentage Encrypted : 0.0%"
6. Restart your computer, before proceeding with the image creation process.
3. A message will be displayed, stating that the drive will be decrypted and that decryption may take
some time. Click Turn off Bitlocker / Decrypt the drive to continue and turn off BitLocker on the
drive.
4. Restart your computer, before proceeding with the image creation process. Thus, you can disable
bitlocker using command prompt.
This might take some time to decrypt the drive and remove BitLocker protection.