Register your product and get support at 6504 series

www.philips.com/TVsupport

User Manual
43PUS6504
50PUS6504
58PUS6504
65PUS6504
70PUS6504
Contents

13.2 Connect to Network 45

1 Get Support 3 13.3 Wireless and Network Settings 46
1.1 Identify and Register your TV 3
1.2 TV Help and User Manual 3 14 Smart TV 48
1.3 On-line Help and User Manual 3 14.1 Setup Smart TV 48
1.4 Consumer Care / Repair 3 14.2 Smart TV Start Page 48
14.3 App Gallery 48
2 Software 5
2.1 Update Software 5 15 TV on Demand / Video on Demand
2.2 Software Version 5
49
3 Quick Guide 6 16 Netflix 50
3.1 Remote Control 6
3.2 IR sensor 8
17 Rakuten TV 51
3.3 Joystick - Local Control 8
18 Amazon Prime Video 52
4 Setting Up 9
4.1 Read Safety 9
19 YouTube 53
4.2 TV Placement 9
4.3 Turn on TV 9
20 Environmental 54
20.1 European Energy Label 54
5 Connections 11 20.2 Product Fiche 54
5.1 Connectivity guide 11 20.3 End of Use 54
5.2 Antenna 11
5.3 Satellite 11
21 Specifications 56
5.4 Video Device 11 21.1 Power 56
5.5 Audio Device 12 21.2 Reception 56
5.6 Mobile Device 13 21.3 Display Resolution 56
5.7 Other Device 14 21.4 Supported Input Resolution - Video 56
21.5 Supported Input Resolution - Computer 56
6 Switch Source 17 21.6 Sound 57
6.1 Source List 17 21.7 Multimedia 57
6.2 Rename Device 17 21.8 Connectivity 57

7 Channels 18 22 Troubleshooting 58
7.1 About Channels and Switch Channels 18 22.1 Tips 58
7.2 Install Channel 18 22.2 Switch On 58
7.3 Channel List 23 22.3 Remote Control 58
7.4 Favourite Channels 24 22.4 Channels 58
7.5 Text / Teletext 25 22.5 Satellite 59
22.6 Picture 59
8 TV Guide 27 22.7 Sound 60
8.1 What You Need 27 22.8 HDMI - UHD 60
8.2 Using the TV Guide 27 22.9 USB 61
22.10 Wi-Fi and Internet 61
9 Freeview Play 29 22.11 Wrong Menu Language 61
9.1 About Freeview Play 29
9.2 Using Freeview Play 29
23 Safety and Care 62
23.1 Safety 62
10 Recording and Pause TV 30 23.2 Screen Care 63
10.1 Recording 30
10.2 Pause TV 31
24 Terms of Use 64
11 Videos, Photos and Music 32 25 Copyrights 65
11.1 From a USB Connection 32 25.1 HDMI 65
11.2 Photos 32 25.2 Dolby Audio 65
11.3 360 Photo 32 25.3 Dolby Vision and Dolby Atmos 65
11.4 Videos 33 25.4 DTS-HD (italics) 65
11.5 Music 33 25.5 Wi-Fi Alliance 65
25.6 Other Trademarks 65
12 Open TV Setting Menus 34
12.1 Home Menu Overview 34
26 Open Source 66
12.2 Frequent settings and All settings 34 26.1 Open Source Software 66
12.3 All Settings 34 26.2 Open Source License 66

13 Wireless and Networks 45 27 Disclaimer regarding services and/or

software offered by third parties 70
13.1 Home Network 45
Index 71

2
1 Ambilight function.

Get Support 1.3

1.1 On-line Help and User
Identify and Register your TV Manual
Identify your TV - TV model number and serial To solve any Philips TV related problem, you can
number consult our online support. You can select your
You might be asked to provide the TV product model language and enter your product model number.
number and serial number. Find these numbers on Go to www.philips.com/TVsupport.
the packaging label or on the type label on the back
On the support site you can find your country's
or bottom of the TV.
telephone number to contact us as well as answers to
Register your TV frequently asked questions (FAQs). In some countries,
you can chat with one of our collaborators and ask
Register your TV and enjoy a range of benefits
your question directly or send a question by email.
including full support (including downloads),
You can download new TV software or the manual to
privileged access to information about new products,
read on your computer.
exclusive offers and discounts, the chance to win
prizes and even participate in special surveys about For more TV troubleshooting and frequently asked
new releases. questions (FAQs)...
Go to www.philips.com/TVsupport Go
to http://philips-tvconsumercare.kxondemand.com/
portal/en/ModelSelect
1.2

TV Help and User Manual TV Help on your tablet, smartphone or computer

 (Home) > Settings > Help To carry out extended sequences of instructions more
easily, you can download the TV Help in PDF format
You can use Help function to diagnose and get more
to read on your smartphone, tablet or
information about your TV.
computer. Alternatively, you can print the relevant
• How to - You can see instructions on how to Help page from your computer.
install channels, sort channels, update TV software, To download the Help (user manual) go
connect external devices and use Smart functions on to www.philips.com/TVsupport
your TV.

• Check the TV - You can check if the picture, sound, 1.4

Ambilight* are working fine during playing a short
video clip. Consumer Care / Repair
• Check the network - Check the network
For support and repair, call the Consumer Care
connection.
hotline in your country. Our service engineers will take
• View weak signal history - Display the list of
care of a repair, if necessary.
channel numbers that were automatically saved
when signal strength was weak. Find the telephone number in the printed
• Update software - Check available software documentation that came with the TV.
updates. Or consult our
• User manual - Read the user manual for TV website www.philips.com/TVsupport and select
information. your country if needed.
• Troubleshooting - Find a solution for frequent ask
questions. TV model number and serial number
• Factory settings - Reset all settings to factory You might be asked to provide the TV product model
settings. number and serial number. Find these numbers on
• Reinstall TV - Reinstall and redo the complete TV the packaging label or on the type label on the back
installation. or bottom of the TV.
• Contact info - Show the telephone number or web
address for your country or region.  Warning

* Ambilight setting is only for models which support Do not attemp to repair the TV yourself. This may

3
cause severe injury, irrepairable damage to your TV or
void your warranty.

4
2 back on again. Please wait.

Software Do not . . .
• use the remote control
• remove the USB memory device from the TV
2.1
• press  twice
Update Software • press the power switch on the TV
The TV switches itself off (for 10 seconds) and then
back on again. Please wait.
Search for Updates
The TV software has been updated. You can use the
Update from Internet TV again.
To prevent an accidental update of the TV software,
 (Home) > Settings > Update software > Search delete the autorun.upg file from the USB memory
for updates > Internet (Recommended) device.
Look for a software update yourself.
• If the TV is connected to the Internet, you may
receive a message to update the TV software. You Local Updates
need a high-speed (broadband) Internet
 (Home) > Settings > Update
connection. If you receive this message, we
software > Search for updates > USB > Local
recommend you to carry out the update.
updates.
• During the software update, there is no picture and
the TV will switch off and on again. This might happen For dealers and expert users.
several times. The update can take a few minutes.
• Wait until the TV picture comes back up. Do not
press the power switch  on the TV or on the
remote control during the software update. Look for OAD updates (Over-the-air
Download)
 (Home) > Settings > Update
Update from USB
software > Search for updates > Look for OAD
 (Home) > Settings > Update updates.
software > Search for updates > USB Scan to search for an Over-the-air software update.
• You need a computer with an high-speed Internet
connection and a USB memory device to upload the
software on the TV. 2.2
• Use a USB memory device with 512MB free space.
Make sure that write protection is switched off.
Software Version
1 - Start the update on TV  (Home) > Settings > Update
Select Update software > Search for updates > software > Current software info
USB, then press OK.
2 - Identify the TV To view the current TV software version.
Insert the USB memory into one of the USB
connections of the TV.
Select Start and press OK. An identification file is
written on the USB memory device.
3 - Download the TV software
- Insert the USB memory into your computer.
- On the USB memory device, locate the
file update.html and double click it.
- Click on Send ID.
- If new software is available, download the .zip file.
- After the download, unzip the file and copy the
file autorun.upg onto the USB memory device.
- Do not place this file in a folder.
4 - Update the TV software
Insert the USB memory into the TV again. The update
starts automatically.
The TV switches itself off for 10 seconds and then

5
3

Quick Guide
3.1

Remote Control
Batteries and Cleaning
Replace batteries
If the TV does not react on a key press on the remote 1 -  Standby / On
control, the batteries might be empty. To switch the TV on or back to Standby.

To replace the batteries, open the battery 2 -  INFO

compartment on the back of the remote control. To open or close programme info.

1 - Slide the battery door in the direction shown by 3 -  SOURCES

the arrow. To open the Sources menu.
2 - Replace the old batteries with 2 4 -  Search
type AAA-R03-1.5V batteries. Make sure the + and To open the Smart TV searches page.
the - ends of the batteries line up correctly.

Top (for UK models)

3 - Reposition the battery door and slide it back until

it clicks.
• Remove the batteries if you are not using the remote
control for a long time.
• Safely dispose of your old batteries according to the 1 -  Standby / On
end of use directions. To switch the TV on or back to Standby.
Cleaning 2 -  INFO
To open or close programme info.
Your remote control is treated with a scratch-resistant
coating. 3 -  SOURCES
To open the Sources menu.
To clean the remote control, use a soft damp cloth.
Never use substances such as alcohol, chemicals or 4 -  SMART TV
household cleaners on the remote control. To open the Smart TV start page.

Key Overview Middle

Top

6
 • If you have a Netflix membership subscription, you
can enjoy Netflix on this TV. Your TV must be
connected to the Internet.
• To open Netflix, press  to open the Netflix
App. You can open Netflix immediately from a TV in
standby.
www.netflix.com
2 -  Mute / Volume
Press in middle to mute the sound or to restore it.
Prese + or - to adjust the volume level.
3 - Number keys
To select a channel directly.
4 - TEXT
1 - OK key To open or close Text/Teletext.
To confirm a selection or setting. To open the channel
list while watching TV if Interactive Service is not 5 -  - EXIT
available. Press in middle to switch back to watch TV. To stop
an interactive TV application. Prese + or - to switch to
2 -  BACK the next or previous channel in the channel list. To
To close a menu without changing a setting. open the next or previous page in Text/Teletext.
3 - Playback and Record 6 -  SMART TV
• Play , to playback. To open the Smart TV start page.
• Pause , to pause playback
• Stop , to stop playback 7- 
• Rewind , to rewind To open the Rakuten TV App directly.
• Fast forward , to go fast forward 8 -  TV Guide / Channel list
• Record , to start recording To open or close the TV Guide. Long press to open
4 -     Colour keys the channel list.
Direct selection of options. Blue key , opens Help.
5 - Arrow / navigation keys
Bottom (for UK models)
To navigate up, down, left or right.
6 -  Home
To open the Home menu.
7 -  OPTIONS
To open or close the Options menu.

Bottom

1- 
To open the Netflix App directly. With the TV switched
on or from standby.
• If you have a Netflix membership subscription, you
can enjoy Netflix on this TV. Your TV must be
connected to the Internet.
• To open Netflix, press  to open the Netflix
App. You can open Netflix immediately from a TV in
1-  standby.
To open the Netflix App directly. With the TV switched www.netflix.com
on or from standby. 2 -  Mute / Volume
Press in middle to mute the sound or to restore it.

7
Prese + or - to adjust the volume level.
3 - Number keys
To select a channel directly.
4 -  Search
Search key for Smart TV and Freeview Play.
5 -  - EXIT
Press in middle to switch back to watch TV. To stop
an interactive TV application. Prese + or - to switch to 1 - With the TV switched on, press the joystick key on
the next or previous channel in the channel list. To the back of the TV to bring up the basic menu.
open the next or previous page in Text/Teletext. 2 - Press left or right to
6 - Freeview Play select  Volume,  Channel or  Sources.
To open the Explore Freeview Play page. Select  Demo, to start a demo movie.

7- 
To open the Rakuten TV App directly.
8 -  TV Guide / Channel list
To open or close the TV Guide. Long press to open
the channel list.

3 - Press up or down to adjust the volume or tune to

3.2 the next or previous channel. Press up or down to go
through the list of sources, including the tuner
IR sensor selection.

The TV can receive commands from a remote control The menu will disappear automatically.
that uses IR (infrared) to send commands. If you use
such a remote control, always make sure you point
the remote control at the infrared sensor on the front
of the TV.

 Warning
Do not put any objects in front of IR sensor of the TV,
it may block the IR signal.

3.3

Joystick - Local Control

Keys on TV
If you lost the remote control or its batteries are
empty, you can still do some basic TV operations.
To open the basic menu…

8
4
Wall Mounting
Setting Up Your TV is also prepared for a VESA-compliant wall
mount bracket (sold separately).
4.1 Use the following VESA code when purchasing the
wall mount . . .
Read Safety
Read the safety instructions first before you use the
TV.
To read the instructions, in Help > User manual,
press the colour key  Keywords and look
up Safety and Care.

4.2

TV Placement • 43PUS6504
VESA MIS-F 200x200, M6 (Minimum 12 mm,
Tips on Placement Maximum 18 mm)
• 50PUS6504
• Position the TV where light does not shine directly VESA MIS-F 200x200, M6 (Minimum 12 mm,
on the screen. Maximum 18 mm)
• Position the TV up to 15 cm away from the wall. • 58PUS6504
• The ideal distance to watch Ultra HD TV is 2 to 5 VESA MIS-F 300x200, M6 (Minimum 16 mm,
times of its screen height. When seated, your eyes Maximum 20 mm)
should be level with the centre of the screen. • 65PUS6504
VESA MIS-F 400x300, M6 (Minimum 12 mm,
Maximum 18 mm)
• 70PUS6504
VESA MIS-F 400x200, M8 (Minimum 18 mm,
Maximum 23 mm)
Preparation
Make sure that the metal screws, to mount the TV to
the VESA-compliant bracket, go about 10mm deep
inside the threaded bushes of the TV.

Caution
Note:
Wall mounting the TV requires special skills and
Please keep the TV away from dust-producing should only be performed by qualified personnel. The
sources such as stoves. It is suggested to clean the TV wall mounting should meet safety standards
dust regularly to avoid getting dust into the TV. according to the TVs weight. Also read the safety
precautions before positioning the TV.
TP Vision Europe B.V. bears no responsibility for
improper mounting or any mounting that results in
TV Stand accident or injury.
You can find the instructions for mounting the TV
stand in the Quick Start Guide that came with the TV.
4.3
In case you lost this guide, you can download it
from www.philips.com/TVsupport. Turn on TV
Use the model number of the TV to look for
the Quick Start Guide to download.

9
Connect Power Cable
• Insert the power cable into the POWER connector
on the back of the TV.
• Make sure the power cable is securely inserted in
the connector.
• Make sure that the power plug, in the wall socket, is
accessible at all times.
• When you unplug the power cable, always pull the
plug, never pull the cable.

Although this TV has a very low standby power

consumption, unplug the power cable to save energy
if you do not use the TV for a long period of time.

On or Standby
Before you switch on the TV, make sure you plugged
in the mains power in the POWER connector on the
back of the TV.

Switch On
• Press the small joystick key on the back of the TV.

Switch to standby
To switch the TV to standby, press  on the remote
control. You can also press the small joystick key on
the back of the TV.
In standby mode, the TV is still connected to the
mains power but consumes very little energy.
To switch off the TV completely, disconnect the
power plug.
When disconnecting the power plug, always pull the
power plug, never the cord. Ensure that you have full
access to the power plug, power cord and outlet
socket at all times.

10
5

Connections
5.1

Connectivity guide
Always connect a device to the TV with the highest
quality connection available. Also, use good quality
cables to ensure a good transfer of picture and
sound.
When you connect a device, the TV recognizes its
type and gives each device a correct type name. You
can change the type name if you wish. If a correct
type name for a device is set, the TV automatically 5.4
switches to the ideal TV settings when you switch to
this device in the Sources menu. Video Device
HDMI
5.2
An HDMI connection has the best picture and sound
Antenna quality.
Insert the antenna plug firmly into For best signal quality transfer, use a High speed
the Antenna socket at the back of the TV. HDMI cable and do not use an HDMI cable longer
than 5 m, and also connect devices supporting HDR
You can connect your own antenna or an antenna
on any one of HDMI connections.
signal from an antenna distribution system. Use an
IEC Coax 75 Ohm RF antenna connector.
Use this antenna connection for DVB-T and DVB-C
input signals.

Copy protection
HDMI ports support HDCP (High-bandwidth Digital
Content Protection). HDCP is a copy protection signal
that prevents copying content from a DVD disc or Blu-
ray Disc. Also referred to as DRM (Digital Rights
5.3
Management).
Satellite
Attach the satellite F-type connector to the satellite
connection SAT at the back of the TV.
Component
Y Pb Pr - Component Video is a high quality
connection.
The YPbPr connection can be used for High Definition
(HD) TV signals. Next to the Y, Pb and Pr signals add
the Audio Left and Right signals for sound.

11
Match the YPbPr (green, blue, red) connector colours
with the cable plugs when you connect.
Use an Audio L/R cinch cable if your device also has
sound.

Digital Audio Out - Optical

Audio Out - Optical is a high quality sound
connection.
Composite
This optical connection can carry 5.1 audio channels.
CVBS - Composite Video is a standard quality If your device, typically a Home Theatre System
connection. Next to the CVBS signal adds the Audio (HTS), has no HDMI ARC connection, you can use this
Left and Right signals for sound. connection with the Audio In - Optical connection on
the HTS. The Audio Out - Optical connection sends
• Y shares the same jack with CVBS. the sound from the TV to the HTS.
• Component and Composite share audio jacks.

Headphones
5.5
You can connect a set of headphones to
Audio Device the  connection on the side of the TV. The
connection is a mini-jack 3.5mm. You can adjust the
volume of the headphones separately.
HDMI ARC
Only HDMI 1 on the TV have HDMI ARC (Audio
Return Channel).
If the device, typically a Home Theatre System (HTS),
also has the HDMI ARC connection, connect it
to HDMI 1 connection on this TV. With the HDMI
ARC connection, you do not need to connect the
extra audio cable that sends the sound of the TV
picture to the HTS. The HDMI ARC connection
combines both signals.

12
 mobile device.
2 - On your mobile device, select the TV. (This TV will
be displayed as TV model name)
3 - Select the TV name on your mobile device, after
connection, you can enjoy using Miracast.

Stop Sharing

You can stop sharing a screen from the TV or from the

mobile device.

From the device

5.6 With the application you use to start Miracast, you
Mobile Device can disconnect and stop watching the screen of the
device on TV. The TV will switch back to the last
selected programme.
Wi-Fi Direct / Miracast
From the TV
About Wi-Fi Miracast To stop watching the screen of the device on TV, you
You can view your photos or play your music and can . . .
videos from a mobile device on your TV with Wi-Fi • press  EXIT to watch a TV broadcast
Miracast™. The mobile device and the TV should be • press  (Home) to start another activity on TV
within range, which usually means being in the same • press  SOURCES to open the Sources menu
room. and select a connected device.
Check if your mobile device is ready for Miracast.
Your TV is a Wi-Fi CERTIFIED Miracast™ device.
Block a Device
With Miracast™, you can watch and share the screen
of your smartphone, tablet or computer on your TV The first time you receive a request to connect from a
screen wirelessly. You can stream videos (audio and device, you can block the device. The request from
video), share photos or anything else that's on screen this device and all its requests in the future, will be
of the device. No need to connect the device to your ignored.
home network. Both the TV and the device must be
Wi-Fi CERTIFIED Miracast™ devices and have Note: Some devices do not support this function.
Miracast switched on. To block a device…
Miracast on this TV is subject to the HDCP protocol Select Block… and press OK.
and cannot display copy-protected premium content
sent by a device. The maximum video resolution Unblock all devices
supported is 720p for 2.4GHz Wi-Fi or 1080p for 5GHz All previously connected and also blocked devices
Wi-Fi. are stored in the Wi-Fi Miracast list of connections. If
For more information on Wi-Fi CERTIFIED Miracast™ you clear this list, all blocked devices will be
go to www.wi-fi.org unblocked.

Wi-Fi®, the Wi-Fi CERTIFIED logo, the Wi-Fi logo are To unblock all blocked devices…
registered trademarks of the Wi-Fi Alliance. Wi-Fi  (Home) > Settings > All settings > Network >
CERTIFIED Miracast™, Miracast™ are trademarks of Reset Wi-Fi Miracast connections.
the Wi-Fi Alliance.
Blocking a previously connected device
If you want to block a device that you previously
Using Miracast connected, you need to clear the Wi-Fi Miracast
connections list first. If you clear this list, you will have
Switch on Miracast to confirm or block the connection for every device
Press  SOURCES > Miracast again.

Share a Screen on TV
1 - Activate Miracast (Screen mirroring) on your

13
Reset Wi-Fi Miracast connections

All previously connected devices are stored in the Wi-

Fi Miracast list of connections.
To clear all connected Miracast devices…
 (Home) > Settings > All
settings > Network > Reset Wi-Fi Miracast
connections.

Smart Card
Screen Delay
Digital TV operators provide a CI+ module
The normal delay when sharing a screen with
(Conditional Access Module - CAM) and an
Miracast is about 1 second. The delay might be longer
accompanying smart card, when you subscribe to
if you are using older devices with less processing
their premium programmes.
power.
Insert the smart card into the CAM module. See the
instruction you received from the operator.

Apps - Philips TV Remote App To insert the CAM in the TV…

1. Look on the CAM for the correct method of
With the TV Remote App, you master your media
insertion. Incorrect insertion can damage the CAM
around you. Send photos, music or videos to your big
and TV.
TV screen or watch any of your TV channels live on
2. While looking at the back of the TV, with the front
your tablet or phone. Look up what you want to
of the CAM facing towards you, gently insert the CAM
watch on the TV Guide and watch it on your phone or
into the slot COMMON INTERFACE.
TV. With the TV Remote App you can use your phone
3. Push the CAM in as far as it will go. Leave it in the
as a remote control*.
slot permanently.
Download the Philips TV Remote App from your
When you switch on the TV, it may take a few minutes
favourite app store today.
before the CAM is activated. If a CAM is inserted and
The Philips TV Remote App is available for iOS and subscription fees are paid (subscription methods can
Android and is free of charge. differ), you can watch the scrambled channels
supported by the CAM smart card.
* When use your phone as a remote control, TV
cannot be switched on or off via your phone. The CAM and smart card are exclusively for your TV. If
you remove the CAM, you will no longer be able to
watch the scrambled channels supported by the
5.7 CAM.

Other Device
CAM with Smart Card - CI+
About CI+

This TV is ready for the CI+ Conditional Access.

With CI+ you can watch premium HD programmes,
like movies and sports, offered by digital TV operators
in your region. These programmes are scrambled by
the TV operator and descrambled with a prepaid CI+
module.
Digital TV operators provide a CI+ module
(Conditional Access Module - CAM) and an
accompanying smart card, when you subscribe to Set Passwords and PIN Codes
their premium programmes. These programmes have
For some CAMs, you must enter a PIN code to watch
a high level of copy protection.
its channels. When you set the PIN code for the CAM,
Contact a digital TV operator for more information on we recommend you to use the same code you are
terms & conditions. using to unlock the TV.

14
To set the PIN code for the CAM… a broadcast with TV guide data from the Internet, you
need to have the Internet connection installed on
1. Press  SOURCES .
your TV before you install the USB Hard Drive.
2. Select the channel type you are using the CAM for.
3. Press  OPTIONS and select Common 1 - Connect the USB Hard Drive to one of
Interface. the USB connections on the TV. Do not connect
4. Select the TV operator of the CAM. The following another USB device to the other USB ports when
screens come from the TV operator. Follow the on- formatting.
screen instruction to look up the PIN code setting. 2 - Switch on the USB Hard Drive and the TV.
3 - When the TV is tuned to a digital TV channel,
press  (Pause). Trying to pause will start the
formatting.
USB Flash Drive
Follow the instructions on screen.
You can view photos or play your music and videos
When the USB Hard Drive is formatted, leave it
from a connected USB flash drive. Insert a USB flash
connected permanently.
drive in one of the USB connections on the TV while
the TV is switched on.
The TV detects the flash drive and opens a list
showing its content.
If the contents list does not appear automatically,
press  SOURCES and select USB.

Warning
The USB Hard Drive is formatted exclusively for this
TV, you cannot use the stored recordings on another
TV or PC. Do not copy or change recording files on
the USB Hard Drive with any PC application. This will
For more information on watching or playing content corrupt your recordings. When you format another
from a USB flash drive, in Help, press the colour USB Hard Drive, the content on the former will be lost.
key  Keywords and look up Photos, Videos and A USB Hard Drive installed on your TV will need
Music. reformatting for use with a computer.
To read the instructions, in Help, press the colour
key  Keywords and look up USB Hard Drive.
USB Hard Drive
Installation Formatting
If you connect a USB Hard Drive, you can pause or Before you can pause or record a broadcast, you
record a TV broadcast. The TV broadcast must be a must connect and format a USB Hard Drive.
digital broadcast (DVB broadcast or similar). Formatting removes all files from the USB Hard
Before you can pause or record a broadcast, you Drive. If you want to record broadcasts with TV Guide
must connect and format a USB Hard Drive. data from the Internet, you must setup the Internet
Formatting removes all files from the USB Hard Drive. connection first before you install the USB Hard Drive.

To Pause Warning

To pause a broadcast, you need a USB compatible The USB Hard Drive is formatted exclusively for this
Hard Drive with a minimum of 4GB disk space. TV, you cannot use the stored recordings on another
TV or PC. Do not copy or change recording files on
To Record the USB Hard Drive with any PC application. This will
To pause and record a broadcast, you need a corrupt your recordings. When you format another
minimum of 250GB disk space. If you want to record USB Hard Drive, the content on the former will be lost.

15
A USB Hard Drive installed on your TV will need
reformatting for use with a computer.
To format a USB Hard Drive…
1 - Connect the USB Hard Drive to one of
the USB connections on the TV. Do not connect
another USB device to the other USB ports when
formatting.
2 - Switch on the USB Hard Drive and the TV.
3 - When the TV is tuned to a digital TV channel,
press  (Pause). Trying to pause will start the
formatting. Follow the instructions on screen.
4 - The TV will ask if you want to use the USB Hard
Drive to store apps, agree to the question if you do.
5 - When the USB Hard Drive is formatted, leave it
connected permanently.

16
6

Switch Source
6.1

Source List
• To open the sources menu, press  SOURCES .
• To switch to a connected device, select the device
with the arrows  (Right) or  (Left) and press OK.
• To view the technical information of the connected
device you are watching, press  OPTIONS and
select Device info.
• To close the source menu without switching to a
device, press  SOURCES again.

6.2

Rename Device
• Only CVBS, YPbPr, HDMI sources can be renamed or
replace device icon.
 (Home) > Settings > All settings > General
settings > Input sources > Source > Edit

1 - Select one of the device icons and press OK, the

preset name appears in the typing field.
2 - Press  (up) to move to the typing field, press
OK, then enter new name using on-screen keyboard.
- Press  (red) key to enter with lower-case
- Press  (green) key to enter with upper-case
- Press  (yellow) key to enter number and
symbol
- Press  (blue) key to delete a character
3 - Select Enter when complete the editing.

17
7 for channels

Channels 1 - Select Start now and press OK.

2 - Select Update channels to only add new digital
7.1 channels.
3 - Select Start and press OK to update channels.
About Channels and Switch This can take a few minutes.
Channels Quick reinstall
 (Home) > Settings > Install
To watch TV channels Channels > Antenna/cable installlation > Search
• Press . The TV tunes to the TV channel you last for channels
watched.
1 - Select Start now and press OK.
• Press  (Home) > TV > Channels and
2 - Select Quick reinstall to install all channels again
press OK.
with default settings.
• Press + or  - to switch channels.
3 - Select Start and press OK to update channels.
• If you know the channel number, type in the number
This can take a few minutes.
with the number keys. Press OK after you entered
the number to switch channels. Advanced reinstall
• To switch back to the previously tuned channel,  (Home) > Settings > Install
press  BACK . Channels > Antenna/cable installlation > Search
To switch to a channel from a channel list for channels
• While watching a TV channel, press OK to open the
1 - Select Start now and press OK.
channel lists.
2 - Select Advanced reinstall to do a full re-
• The channel list can have several pages with
installation which takes you through each step.
channels. To view the next or previous page, press
3 - Select Start and press OK to update channels.
+ or  -.
This can take a few minutes.
• To close the channel lists without switching
channels, press  BACK or  EXIT .
Channel icons
Channel Settings
After an Automatic channel update of the channel list,
newly found channels are marked with a  (star).  (Home) > Settings > Install
If you lock a channel, it will be marked with Channels > Antenna/cable installlation > Search
a  (lock). for channels > Advanced reinstall
1 - Select Start now and press OK.
Radio channels
2 - Select Advanced reinstall to do a full re-
If digital broadcasting is available, digital radio installation which takes you through each step.
stations are installed during installation. Switch to a 3 - Select Start and press OK.
radio channel just like you switch to a TV channel. 4 - Select the country where you are now and
This TV can receive digital television standard DVB. TV press OK.
may not work properly with some operators of digital 5 - Select Antenna (DVB-T) or Cable (DVB-C) ,
television , non-compliance with requirements of the and select one item you need to re-install.
standard in full. 6 - Select Digital and analogue channels, Only
digital channels, or Only analogue channels.
7 - Select Settings and press OK.
7.2 8 - Press  Reset to reset, or press  Done when
complete the settings.
Install Channel Frequency scan
Select the method of searching for channels.
Antenna and Cable • Quick: select the faster method and use the
predefined settings used by most cable providers in
Manually Search for Channels and Channel Settings
your country.
• Full: If this results in having no channels installed or
Search for Channels
if some channels are missing, you can select the
Update channels extended Full method. This method will take more
time to search for and install channels.
 (Home) > Settings > Install
Channels > Antenna/cable installlation > Search • Advanced: If you received a specific network

18
frequency value to search for channels, the All channels list but also in the New channels list.
select Advanced. Empty channels are removed.
If new channels are found or if channels are updated
Frequency step size
or removed, a message is shown at TV start up. The
The TV searches for channels in steps of 8MHz.
TV must be in standby to automatically update
If this results in having no channels installed or if
channels.
some channels are missing, you can search in smaller
steps of 1MHz. Using the 1MHz steps will take more
time to search for and install channels.
Channel Update Message
Network frequency mode
If you intend to use the fast Quick method  (Home) > Settings > Install
in Frequency scan to search for channels, Channels > Antenna/cable installlation > Channel
select Automatic. The TV will use 1 of the predefined update message
network frequencies (or HC - homing channel) as
When new channels are found or if channels are
used by most cable providers in your country.
updated or removed, a message is shown at TV start
If you received a specific network frequency value to
up. To avoid this message to appear after every
search for channels, select Manual.
channel update, you can switch it off.
Network frequency
With the Network frequency mode set to Manual,
you can enter the network frequency value received Digital: Reception Test
from your cable provider here. To enter the value,
use the number keys.  (Home) > Settings > Install
Channels > Antenna/cable installlation > Digital:
Network ID
reception test
Enter the network ID supplied by your cable
provider. The digital frequency is shown for this channel. If the
reception is poor, you can reposition your antenna.
Symbol rate mode
To check the signal quality of this frequency again,
If your cable provider did not give you a
select Search and press OK.
specific symbol rate value to install the TV channels,
To enter a specific digital frequency yourself, use the
leave the Symbol rate mode setting on Automatic.
remote control digit keys. Alternatively, select the
If you received a specific symbol rate value,
frequency, position the arrows on a number
select Manual.
with  and  and change the number
Symbol rate with  and . To check the frequency,
With the Symbol rate mode set to Manual, you can select Search and press OK.
enter the symbol rate value by using the number
keys.
Free / Scrambled Analogue: Manual Installation
If you have a subscription and a CAM - Conditional
 (Home) > Settings > Install
Access Module for pay TV services, select Free +
Channels > Antenna/cable
scrambled. If you did not subscribe to pay TV
installlation > Analogue: manual installation
channels or services, you can select Free
channels only . Analogue TV channels can be manually installed,
channel by channel.
• System
To set up the TV system, select System.
Automatically Search for Channels Select your country or the part of the world where
you are now and press OK.
 (Home) > Settings > Install
Channels > Antenna/cable installlation >
Automatic channel update • Search Channel
If you receive digital channels, you can set the TV to To find a channel, select Search Channel and
automatically update the list with new channels. press OK. You can enter a frequency yourself to find
a channel or let the TV search for a channel.
Alternatively, you can start a channel update yourself. Press OK, select Search and press OK to search
for a channel automatically. The found channel is
Automatic channel update
shown on screen and if the reception is poor,
Once a day, at 6 AM, the TV updates the channels press Search again. If you want to store the channel,
and stores new channels. New channels are stored in select Done and press OK.

19
• Fine tune automatically.
To fine tune a channel, select Fine tune and
• Up to 4 Satellites - You can install up to 4 satellites
press OK. You can fine tune the channel
(4 LNBs) on this TV. Select the exact number of
with  or .
satellites you wish to install at the start of the
If you want to store the channel found,
installation. This will speed up the installation.
select Done and press OK.
• Unicable - You can use a Unicable system to
connect the antenna dish to the TV. You can select
Unicable for 1 or for 2 satellites at the start of the
• Store
installation.
You can store the channel on the current channel
number or as a new channel number. LNB settings
Select Store and press OK. The new channel In some countries, you can adjust the expert settings
number is shown briefly. for homing transponder and each LNB. Only use or
You can redo these steps until you have found all change these settings when a normal installation fails.
available analogue TV channels. If you have non-standard satellite equipment, you
can use these settings to overrule the standard
settings. Some providers might give you some
transponder or LNB valeus which you can enter here.
Satellite
• Universal or Circular - The general type of LNB,
Search for Satellite and Satellite Settings usually you can select this type for your LNB.
• Low LO Frequency / High LO Frequency - The local
Search for Satellite Channel oscillator frequencies are set to standard values.
Adjust the values only in case of exceptional
 (Home) > Settings > Install equipment that needs different values.
Channels > Satellite installlation > Search for • 22 kHz Tone - By default, the Tone is set to
satellite Automatic.
• LNB Power - By default, LNB Power is set to
Update existing channel list
Automatic.
 (Home) > Settings > Install
Channels > Satellite installlation > Search for
satellite > Update channels Add Satellite or Remove Satellite

 (Home) > Settings > Install

Re-install all channels Channels > Satellite installlation > Search for
satellite > Add satellite, Remove satellite
 (Home) > Settings > Install
Channels > Satellite installlation > Search for
satellite > Reinstall channels  (Home) > Settings > Install
• Select the group of channels you want to install. Channels > Satellite installlation > Search for
• Satellite operators can offer channel packages that satellite > Add satellite
bundle free channels (free-to-air) and offer a sorting • You can add an additional satellite to your current
that suits a country. Some satellites offer subscription satellite installation. The installed satellites and their
packages - a collection of channels you pay for. channels remain untouched. Some satellite operators
do not allow adding a satellite.
• The additional satellite should be seen as an extra, it
Satellite Settings is not your main satellite subscription or not the main
satellite of which you use its channel package.
 (Home) > Settings > Install
Typically, you would add a 4th satellite when you
Channels > Satellite installlation > Search for
have 3 satellites already installed. If you have 4
satellite > Reinstall channels
satellites installed, you might consider removing one
1 - Select From a sorted package or All channels first to be able to add a new satellite.
unsorted. • If you currently have only 1 or 2 satellites installed,
2 - Select Settings and press OK. the current installation settings might not allow
3 - Press  Reset to reset, or adding an extra satellite. If you need to change the
press  Done when complete the settings. installation settings, you must redo the complete
satellite installation. You cannot use Add satellite if
Connection type
a change of settings is needed.
Select the number of satellites you want to install.
The TV sets the appropriate connection type

20
 (Home) > Settings > Install
Manual Installation
Channels > Satellite installlation > Search for
satellite > Remove satellite  (Home) > Settings > Install
You can remove one or more satellites from your Channels > Satellite installlation > Manual
current satellite installation. You remove the satellite installtion
and its channels. Some satellite operators do not Manually install satellite.
allow removing a satellite.
• LNB - Select the LNB for which you want to add
new channels.
• Polarisation - Select the polarisation you need.
• Symbol rate mode - Select Manual to enter symbol
Automatically Search for Channels rate.
• Frequency - Enter the frequency for the
 (Home) > Settings > Install transponer.
Channels > Satellite installlation > Automatic • Search - Search for transponder.
channel update
If you receive digital channels, you can set the TV to
automatically update the list with new channels. Channel Packages
Alternatively, you can start a channel update yourself.  (Home) > Settings > Install
Channels > Satellite installlation > Satellite
Automatic channel update
channel list
Once a day, at 6 AM, the TV updates the channels
Satellites can offer channel packages that bundle free
and stores new channels. New channels are stored in
channels (free-to-air) and offer a sorting that suits a
the All channels list but also in the New channels list.
country. Some satellites offer subscription packages -
Empty channels are removed.
a collection of channels you pay for.
If new channels are found or if channels are updated
or removed, a message is shown at TV start up. The Select From a sorted channel package to install the
TV must be in standby to automatically update channels of the package only or select All channel
channels. unsorted to install the package and all other
available channels too. We recommend a Quick
* Only available when Satellite channel list is set to
installation for subscription packages. If you have
From a sorted package
additional satellites that are not part of your
subscription package, we recommend a full
installation. All installed channels are put in the
Channel Update Message channels list.
 (Home) > Settings > Install
Channels > Satellite installlation > Channel update
message
When new channels are found or if channels are Satellite CAMs
updated or removed, a message is shown at TV start
If you use a CAM – a Conditional Access Module with
up. To avoid this message to appear after every
a smart card – to watch satellite channels, we
channel update, you can switch it off.
recommend to do the satellite installation with the
CAM inserted in the TV.

Automatic Update Option Most CAMs are used to descramble channels.

CAMs (CI+ 1.3 with Operator Profile) can install all the
 (Home) > Settings > Install
satellite channels by themselves on your TV. The
Channels > Satellite installlation > Automatic
CAM will invite you to install its satellite(s) and
update option
channels. These CAMs not only install and
Unselect a satellite if you do not want to update descramble the channels but also handle regular
automatically. channel updates.
* Only available when Satellite channel list is set to
From a sorted package

21
Channel List copy To Installed TVs

Depending on whether your TV is already installed or

Introduction not, you must use a different method to upload a
Channel list copy is intended for dealers and expert channel list.
users. To an already installed TV
With Channel list copy, you can copy the channels 1 - Verify the country setting of the TV. (To verify this
installed on one TV onto another Philips TV of the setting, see chapter Re-install channels. Start this
same range. With Channel list copy, you avoid the procedure until you reach the country setting.
time-consuming channel search by uploading a Press  BACK to cancel the installation.)
predefined channel list on a TV. Use a USB flash drive If the country is correct continue with step 2.
of minimum 1 GB. If the country is not correct, you need to start a
reinstallation. See chapter Re-install channels and
Conditions start the installation. Select the correct country and
• Both TVs are from the same year range. skip the channels search. Finish the installation. When
• Both TVs have the same hardware type. Check the done, continue with step 2.
hardware type on the TV type plate on the back of 2 - Plug in the USB flash drive that holds the channel
the TV. list of the other TV.
• Both TVs have compatible software versions. 3 - To start the channel list upload,
press  (Home) > Settings > All
settings > Channels > Expert mode
Copy a Channel List, Check Channel List Version settings > Channel List Copy > Copy to TV and
press OK. Enter your PIN code if necessary.
Copy a channel list to USB flash drive 4 - The TV notifies you if the channel list is copied to
 (Home) > Settings > All settings > Channels the TV successfully. Unplug the USB flash drive.
> Expert mode settings > Channel list
copy > Copy to USB
Channel Options
Check channel list version
Open Options
 (Home) > Settings > All settings > Channels
> Expert mode settings > Channel list While watching a channel, you can set some options.
copy > Current version Depending on the type of channel you are watching
or depending on the TV settings you made, some
options are available.
Upload a Channel List To open the options menu…
To not Installed TVs 1 - While watching a channel, press  OPTIONS.
2 - Press  OPTIONS again to close.
Depending on whether your TV is already installed or
not, you must use a different method to upload a
channel list.
Programme info
To a TV that is not yet installed
Select Programme info to view the information of the
1 - Plug in the power plug to start the installation and
programme you are watching.
select language and country. You can skip the
channel search. Finish the installation.
2 - Plug in the USB flash drive that holds the channel
list of the other TV. Subtitles
3 - To start the channel list upload,
To switch on Subtitles, press  OPTIONS and select
press  (Home) > Settings > All
Subtitles.
settings > Channels > Expert mode
settings > Channel List Copy > Copy to TV and You can switch
press OK. Enter your PIN code if necessary. subtitles Subtitle on or Subtitle off . Alternatively
4 - The TV notifies you if the channel list is copied to you can select Automatic.
the TV successfully. Unplug the USB flash drive.
Automatic
If language information is part of the digital broadcast
and the broadcasted programme is not in your

22
language (the language set on TV), the TV can show
Channel info
subtitles automatically in one of your preferred
subtitle languages. One of these subtitle languages Select Channel info to view the technical information
must also be part of the broadcast. of the channel.
You can select your preferred subtitle languages
in Subtitle language.
HbbTV on This Channel

If you want to avoid access to HbbTV pages on a

Subtitles Language specific channel, you can block the HbbTV pages for
If none of the preferred subtitle languages are this channel only.
available, you can select another subtitle language if 1 - Tune to the channel of which you want to block
available. If no subtitle languages are available, you the HbbTV pages.
cannot select this option. 2 - Press  OPTIONS and select HbbTV on this
To read more information, in Help, press the colour channel and press  (right).
key  Keywords and look up Subtitle Language. 3 - Select Off and press OK.
4 - Press  (left) to go back one step or
press  BACK to close the menu.
Audio Language To block HbbTV on TV completely…

If none of the preferred audio languages are  (Home) > Settings > All settings > Channels
available, you can select another audio language if > HbbTV > Off
available. If no audio languages are available, you
cannot select this option.
Universal Access
To read more information, in Help, press the colour
key  Keywords and look up Audio Language. Only available when Universal access set to On.
 (Home) > Settings > All settings > Universal
access > Universal access > On.
Dual I-II
To read more information, in Help, press the colour
If an audio signal contains two audio languages but key  Keywords and look up Universal Access.
one language or both has no language indication, this
option is available.
Video Selection

Common Interface Digital TV channels can offer multi video signals (multi-
feed broadcast), different camera viewpoints or
If prepaid premium content is available from a CAM, angles of the same event or different programmes on
you can set the provider settings with this option. one TV channel. The TV shows a message if any such
TV channels are available.

Mono / Stereo
7.3
You can switch the sound of an analogue channel to
Mono or Stereo. Channel List
To switch to Mono or Stereo…
Open Channel List
Tune to an analoge channel.
1 - Press  OPTIONS, select Mono/Stereo and To open the current channel list…
press  (right). 1 - Press , to switch to TV.
2 - Select Mono or Stereo and press OK. 2 - Press OK to open the channel list if Interactive
3 - Press  (left) repeatedly if necessary, to close Service is not available, or long press  TV Guide to
the menu. open the channel list.
3 - Press  OPTIONS > Select channel list.
4 - Select one channel list you want to watch.
5 - Press  BACK to close the channel list.

23
Channel List Options Select Channel Range

 > OK >  OPTIONS > Select channel range

Open Option Menu
Select a range of channels in a favourites channel
To open the channel list option menu... list, once completed, press OK.
• Press , to switch to TV.
• Press OK to open the current channel list.
• Press  OPTIONS , and select one of options. Select Channel List
• Press  BACK to close the channel list.
 > OK >  OPTIONS > Select channel list
Select a range of channels in a favourites channel
Rename Channel list, once completed, press OK.

1 - Press , to switch to TV.

2 - Long press  TV Guide / Channel list to open
Search Channels
current channel list.
3 - Select one channel you want to rename.  > OK >  OPTIONS > Search channel
4 - Press  OPTIONS > Rename channel, and
You can search for a channel to find it in a long list of
press OK.
channels.
5 - In the typing field, press OK to open on-screen
keyboard, or press  BACK to hide the on-screen 1 - Press , to switch to TV.
keyboard. 2 - Press OK to open the current channel list.
6 - Use navigation keys to select a character, then 3 - Press  OPTIONS > Search channel, and
press OK. press OK.
- Press  (red) key to enter with lower-case 4 - In the typing field, press OK to open on-screen
- Press  (green) key to enter with upper-case keyboard, or press  BACK to hide the on-screen
- Press  (yellow) key to enter number and keyboard.
symbol 5 - Use navigation keys to select a character, then
- Press  (blue) key to delete a character press OK.
7 - Select Done when complete the editing. - Press  (red) key to enter with lower-case
8 - Press  BACK to close the channel list. - Press  (green) key to enter with upper-case
- Press  (yellow) key to enter number and
symbol
Select Channel Filter - Press  (blue) key to delete a character
- Select Enter to start the searching
1 - Press , to switch to TV. 6 - Select  Done when the searching is
2 - Press OK to open the current channel list. completed.
3 - Press  OPTIONS > Digital/analogue, 7 - Press  BACK to close the channel list.
Free/scrambled
4 - Select one of channel combinations showing in
the channel list. Lock or Unlock Channel

 > OK >  OPTIONS > Lock channel, Unlock

Create or Edit Favourites Channel List channel
To prevent children from watching a channel, you can
 > OK >  OPTIONS > Create favourites list
lock a channel. To watch a locked channel, you must
Select a channel then press OK to add in a enter the 4 digit Child Lock PIN code first. You
favourites channel list, once completed, cannot lock programmes from connected devices.
press  Done.
The locked channel will have  next to the channel
 > OK >  OPTIONS > Edit favourites logo.
Select a channel then press OK to add in or remove
from a favourites channel list, once completed, press
 Done. Remove Favourite List

 > OK >  OPTIONS > Remove favourite list

To remove existing favourite list, select Yes.

24
7.4 With the TV Guide you can view a list of the current
and scheduled TV programmes of your favourite
Favourite Channels channels. Along with your favourite channels, the first
3 most used channels from the broadcasters’ default
About Favourite Channels list will be appended after your favourite channels for
your preview. You need to add these channels into
You can create a favourite channel list that only holds your favourite list to enable its operation (refer to "TV
the channels you want to watch. With the Favourite Guide" chapter).
channel list selected, you will only see your favourite
channels when you switch through channels. On each page of TV Guide, there is a "Did you know"
grid inserted on your favourite channel list. The "Did
you know"-channel provides useful tips to improve
the way you use your TV.
Create a Favourites List
* Satellite channel only can be searched
1 - While watching a TV channel, press OK to open on xxPxSxxxx TV models.
the channel list.
2 - Select the channel, and press  Mark as
favourites to mark as favourite. 7.5
3 - The selected channel is marked with a .
4 - To finish, press  BACK . The channels are Text / Teletext
added to the Favourites list.
Subtitles from Text
If you tune to an analogue channel, you need to
Remove Channel from the Favourites make the subtitles available for each channel
List manually.

To remove a channel from the favourites list, select 1 - Switch to a channel and press TEXT to open
the channel with , then press  Unmark as Text.
favourite again to unmark as favourite. 2 - Enter the page number for subtitles, usually 888.
3 - Press TEXT again, to close Text.
If you select On in the Subtitle menu when watching
this analogue channel, subtitles will be shown if
Reorder Channels available.
You can reorder — reposition — channels in the To know if a channel is analogue or digital, switch to
Favourite channel list. the channel and press  INFO .
1 - While watching a TV channel, press OK > 
OPTIONS > Select channel list.
2 - Select Antenna favourite, Cable Favourite or Text Pages
Satellite favourite*, and press  OPTIONS .
3 - Select Reorder channels, select the channel you To open Text/Teletext press TEXT, while you are
want to reorder, and press OK. watching TV channels.
4 - Press the Navigation buttons to move the To close Text, press TEXT again.
highlighted channel to another location and
press OK. Select a Text page
5 - Once completed, press  Done. To select a page . . .
* Satellite channel only can be searched 1 - Enter the page number with the number keys.
on xxPxSxxxx TV models. 2 - Use the arrow keys to navigate.
3 - Press a colour key to select a colour-coded
subject at the bottom of the screen.
Favourites List on TV Guide Text sub-pages
A Text page number can hold several subpages. The
You can link the TV Guide for your Favourite List.
subpage numbers are shown on a bar next to the
1 - While watching a TV channel, main page number.
press OK >  OPTIONS > Select channel list. To select a subpage, press  or .
2 - Select Antenna favourite, Cable Favourite or
Satellite favourite*, and press OK. T.O.P. Text pages
3 - Press  TV GUIDE to open it.

25
Some broadcasters offer T.O.P. Text.
To open T.O.P. Text pages within Text,
press  OPTIONS and select T.O.P. overview.
* The teletext can only be reached when the channels
are installed directly on the TV’s internal tuner and
the set is on TV mode. If a set-top box is being used,
the teletext will be unavailable via TV. In that case,
the set-top box’s teletext can be used instead.

Text Options
In Text/Teletext, press  OPTIONS to select the
following…
• Freeze page
To stop the automatic rotation of subpages.
• Dual screen / Full screen
To show the TV channel and Text alongside each
other.
• T.O.P. overview
To open T.O.P. Text.
• Enlarge
To enlarge the Text page for comfortable reading.
• Reveal
To unhide hidden information on a page.
• Language
To switch the group of characters that Text uses to
display correctly.
• Text 2.5
To activate the Text 2.5 for more colours and better
graphics.

Text Setup
Text language
Some digital TV broadcasters have several Text
languages available.

Set teletex preference language

 (Home) > Settings > All settings > Region and
language > Language > Primary text, Secondary
text

Text 2.5
If available, Text 2.5 offers more colours and better
graphics. Text 2.5 is activated as a standard factory
setting.
To switch off Text 2.5…
1 - Press TEXT.
2 - With Text/Teletext open on screen,
press  OPTIONS.
3 - Select Text 2.5 > Off.
4 - Press  (left) repeatedly if necessary, to close
the menu.

26
8
Change Day
TV Guide If the TV guide information comes from the
broadcaster, you can press  + to view the
8.1 schedule of one of the next days. Press  - to go
back to the previous day.
What You Need
Alternatively, you can press  OPTIONS and
With the TV guide you can view a list of the current select Change day.
and scheduled TV programmes of your channels.
Depending on where the TV guide information (data)
is coming from, analogue and digital channels or only
digital channels are shown. Not all channels offer TV
Set a Reminder
guide information. You can set a reminder for a programme. A message
The TV can collect TV guide information for the will alert you at the start of the programme. You can
channels that are installed on the TV (e.g the tune to this channel immediately.
channels you watch with Watch TV). The TV cannot In the TV Guide a programme with a reminder is
collect the TV guide information for channels viewed marked with a  (clock).
from a digital receiver.
To set a reminder…
1 - Press  TV GUIDE and select an upcoming
8.2 programme.
Using the TV Guide 2 - Press  Set reminder and press OK.
To clear a reminder…
Open the TV Guide 1 - Press  TV GUIDE and select a programme
with the reminder, which is marked with a  (clock).
To open the TV guide, press  TV GUIDE. 2 - Press  Clear reminder, and select Yes, then
Press  TV GUIDE again to close. press OK.
The first time you open the TV Guide, the TV scans all
TV channels for programme information. This may
take several minutes. TV guide data is stored on TV. Search by Genre
If the information is available, you can look up
scheduled programmes by genre like movies, sports,
Tune to a Programme etc.

Switch to a programme To search for programmes by genre,

• From the TV guide, you can switch to a current press  OPTIONS and select Search by genre.
programme. Select a genre and press OK. A list with the found
• To select a programme, use the arrow keys to programmes appears.
highlight the programme name.
• Navigate to the right to view programmes scheduled
later that day. List of Reminders
• To switch to the programme (channel), select the
programme and press OK. You can view a list of the reminders you have set.
View programme details
List of Reminders
To call up the details of the selected programme,
To open the list of reminders…
press  INFO .
1 - Press  TV GUIDE.
2 - Press  OPTIONS and select All reminders.
3 - In the list of reminders, select the reminder you
want to remove, the selected reminder is marked
as .
4 - Select Clear selected and press OK.
5 - Select Close to close the list of reminders.

27
Set a Recording
You can set a recording in the TV Guide.
To record a programme…
1 - Press  TV GUIDE and select a future or
ongoing programme.
2 - Press the colour key  Record .
To cancel a recording…
1 - Press  TV GUIDE and select the programme
set for recording.
2 - Press the colour key  Clear recording .
To see the recording list, press  Recordings , a
programme set to be recorded is marked with
a  (red dot) on the front of the programme name.

28
9

Freeview Play
9.1

About Freeview Play

To enjoy Freeview Play*, you need to connect your
TV to Internet first.
Freeview Play offers:
• Watch TV programmes you missed from the last
seven days.
• Watch live TV and on demand, all in one place
without entering an app, you can search Freeview
Play programmes in TV Guide.
• Watch over 70 standard channels and upto 15 HD
channels.
• Enjoy on demand services like BBC iPlayer, the ITV
Hub, All 4, Demand 5, BBC NEWS and BBC SPORT.
• There are no contracts and no monthly costs, you’re
in control.
For detail, please visit: https://www.freeview.co.uk
* Freeview Play is only for UK models.

9.2

Using Freeview Play

To open Freeview Play*…
1 - Press  (Home) to open the home menu.
2 - Press  (right) to overview available Freeview
players (apps) or select Explore Freeview Play to
enter Freeview Play page.
3 - You can press  Search or enter a keyword in
search bar at the right-top to search channels.
4 - You can press  Recommendation on TV Guide
to sort different types of programmes on selecting a
specific genre.
5 - Select a programme and press OK to start
watching.
6 - Press  BACK to close.
* Freeview Play is only for UK models.

29
10 To record a programme…

Recording and 1 - Press  TV GUIDE.

2 - On the TV guide, select the channel and
programme you wish to record. Press  (Right)
Pause TV or  (Left) to scroll through the programmes of a
channel.
3 - With the programme highlighted, press the colour
10.1
key  Record . The programme is scheduled for
Recording recording. A warning will show automatically when
overlapping recordings are scheduled. If you plan to
record a programme in your absence, remember to
What You Need leave the TV switched to Standby and the USB Hard
Drive switched on.
You can record a digital TV broadcast and watch it
later.
To record a TV programme you need… List of Recordings
• a connected USB Hard Drive formatted on this TV
You can view and manage your recordings in the list
• digital TV channels installed on this TV
of recordings. Next to the list of recordings, there is a
• to receive channel information for the on screen TV
separate list for scheduled recordings and reminders.
Guide
• a reliable TV clock setting. If you reset the TV clock To open the list or recordings…
manually, recordings may fail.
Press  TV GUIDE.
You cannot record when you are using Pause TV.
1 - Press the colour key  Recordings .
In terms enforcement of copyright legislation, some 2 - In the list of recordings, select the
DVB providers can apply different restriction by tabs New, Watched or Expired and press OK to
means of DRM (Digital Right Management) filter your view.
technology. In case of broadcasting protected 3 - With a recording selected in the list, you can
channels, recording, record validity or number of remove the recording with the colour
views may be restricted. Recording may be key  Remove . You can rename a recording
completely prohibited. In case of trying to record a with the colour key  Rename.
protected broadcasting or play back an expired
Broadcasters can limit the number of days a recording
recording, an error message can appear.
can be viewed. When this period expires, the
recording will be marked as expired. A recording in
the list can show the number of days before it expires.
Record a Programme When a scheduled recording was prevented by the
broadcaster or when the broadcast was interrupted, a
Record Now recording is marked as Failed.
To record the programme you are watching right now,
press  (Record) on the remote control. The
recording will start immediately. Manual recording
To stop the recording, press  (Stop). You can schedule a recording that is not linked to a
When TV Guide data is available, the programme you TV programme. You set the tuner type, channel and
are watching will be recorded from the moment you the start and end time yourself.
pressed the recording key until the programme ends. To schedule a recording manually…
• If you receive TV guide information from the 1 - Press  TV GUIDE.
broadcaster, the recording starts immediately. You 2 - Press the colour key  Recordings .
can adjust the end time of the recording in the list of 3 - Press the colour key  Schedule and
recordings. press OK.
4 - Select the tuner from where you want to record
and press OK.
Schedule a Recording 5 - Select the channel to record from and press OK.
6 - Select the day of the recording and press OK.
You can schedule a recording of an upcoming 7 - Set the start and end time of the recording. Select
programme for today or a few days from today a button and use the  (up) or  (down) keys to
(maximum of 8 days away). The TV will use the data set the hours and minutes.
from the TV Guide to start and end the recording.

30
8 - Select Schedule and press OK to schedule the
manual recording. Replay
The recording will appear in the list of scheduled Since the TV stores the broadcast you are watching,
recordings and reminders. you can mostly replay the broadcast for a few
seconds.
To replay a current broadcast…
Watch a Recording 1 - Press  (Pause)
To watch a recording… 2 - Press  (Rewind). You can
press  repeatedly to select from where you want
1 - Press  TV GUIDE. to start viewing the paused broadcast. Press these
2 - Press the colour key  Recordings . keys repeatedly to change speed. At one point you
3 - In the list of recordings, select the recording you will reach the start of the broadcast storage or the
need and press OK to start watching. maximum time span.
4 - You can use the 3 - Press  (Play) to watch the broadcast again.
keys  (pause),  (play),  (rewind),  (fast 4 - Press  (Stop) to watch the broadcast live.
forward) or  (stop).
5 - To switch back to watch TV, press  EXIT.

10.2

Pause TV
What You Need
To pause a TV programme you need…
• a connected USB Hard Drive formatted on this TV
• digital TV channels installed on this TV
• to receive channel information for the on screen TV
guide
With the USB Hard Drive connected and formatted,
the TV continuously stores the TV broadcast you are
watching. When you switch to another channel, the
broadcast of the former channel is cleared. Also
when you switch the TV to standby the broadcast is
cleared.
You cannot use Pause TV when you are recording.

Pause a Programme
To pause and resume a broadcast…
• To pause a broadcast, press  (Pause). A progress
bar at the bottom of the screen appears briefly.
• To call up the progress bar, press  (Pause) again.
• To resume watching, press  (Play).
With the progress bar on screen, press  (Rewind)
or press  (Forward) to select from where you want
to start viewing the paused broadcast. Press these
keys repeatedly to change speed.
To switch back to the actual TV broadcast,
press  (Stop).

31
11
Photo Options
Videos, Photos and With a photo on screen, press  OPTIONS to…

Music List/Thumbnails
View photos with list view or thumbnails view.
Shuffle off, Shuffle on
11.1
View the pictures in sequential order, or at random.
From a USB Connection Repeat, Play once
View the pictures repeatedly or once only.
You can view your photos or play your music and
videos from a connected USB flash drive or USB Hard Stop music
Drive. Stop the music if the music playback is in progress.

With the TV switched on, plug in a USB flash drive or a Slideshow speed
USB Hard Drive to one of the USB connections. Set the speed of the slideshow.

Press  SOURCES, then select  USB, you can Slideshow transitions

browse your files in folder structure you have Set the transition from one picture to the next.
organised on the USB Hard Drive.

Warning 11.3
If you try to pause or record a programme with a USB 360 Photo
Hard Drive connected, the TV will ask you to format
the USB Hard Drive. This formatting will delete all
current files on the USB Hard Drive. View 360 Photos
1 - Press  SOURCES, select  USB and
press OK.
11.2
2 - Select  USB Flash Drive and press  (right)
Photos to select the USB device you need.
3 - Select 360 Photos, you can press  Sort to
browse your 360 photos by date, month, year or
View Photos alphabetically by name.
1 - Press  SOURCES, select  USB and 4 - Select one of 360 photos, and press OK to view
press OK. the selected 360 photo.
2 - Select  USB Flash Drive and press  (right) • To view photos, select 360 Photos in the menu bar,
to select the USB device you need. select a photo thumbnail and press OK.
3 - Select Photo, you can press  Sort to • If there are several 360 photos in the same folder,
browse your photos by date, month, year or select a 360 photo and press  Slide show to start
alphabetically by name. a slide show of all 360 photos in this folder.
4 - Select one of photos, and press OK to view the • Watch a photo and press  INFO to show below:
selected photo. Progress bar, Playback control bar,  (Jump to the
• To view photos, select Photos in the menu bar, previous photo in a folder),  (Jump to the next photo
select a photo thumbnail and press OK. in a folder),  (Start slideshow playback),  (Pause
• If there are several photos in the same folder, select the playback),  (Play all/Play one),  (Little
a photo and press  Slide show to start a slide Planet),  (Auto Mode/Manual mode).
show of all photos in this folder. - Little Planet: Little Planet is an alternate and fun
• Watch a photo and press  INFO to show below: view of 360 photo. When Little Planet view is started,
Progress bar, Playback control bar,  (Jump to the the 360 photo will be rendered in a wrapped around
previous photo in a folder),  (Jump to the next photo view like a planet.
in a folder),  (Start slideshow playback),  (Pause - Auto Mode/Manual mode: when the 360 player is
the playback),  (Start slideshow),  (Rotate started, it will auto pan the selected 360 photo from
photo) left to right (0 to 360 degrees) in 360 view. When
manual mode is entered, the 360 player will stop
auto panning/rotating to allow
manually panning/rotating with the remote control
keys.

32
360 Photo Options Video Options
With a 360 photo on screen, press  OPTIONS to… During the video playback, press  OPTIONS to…
List/Thumbnails List/Thumbnails
View 360 photos with list view or thumbnails view. View video files with list view or thumbnails view.
Shuffle off, Shuffle on Subtitles
View the pictures in sequential order, or at random. Display the subtitles if available, select On, Off,
or On during mute.
Repeat, Play once
View the pictures repeatedly or once only. Shuffle off, Shuffle on
Play videos in sequential order, or at random.
Stop music
Stop the music if the music playback is in progress. Repeat, Play once
Play videos repeatedly or once.

11.4
11.5
Videos
Music
Play Videos
Play Music
To play a video on TV…
Open music folder
Select  Videos , and select the file name and
press OK. 1 - Press  SOURCES, select  USB and
press OK.
• To pause the video, press OK. Press OK again to
2 - Select  USB Flash Drive and press  (right)
continue.
to select the USB device you need.
• To rewind or go fast forward, press  or . Press
3 - Select Music and select one of music, you
the keys several times to speed up - 2x, 4x, 8x, 16x,
can press OK to play the selected music.
32x.
• Select a music and press  INFO to show file
• To jump to the next video in a folder, press OK to
information.
pause and select  on screen and press OK.
• Playback a music and press  INFO to show
• To stop the video playback, press  (Stop).
below:
• To go back to the folder, press .
Progress bar, Playback control bar,  (Jump to the
Open video folder previous music in a folder),  (Jump to the next
1 - Press  SOURCES, select  USB and music in a
press OK. folder),  (Playback),  (Rewind),  (Fast
2 - Select  USB Flash Drive and press  (right) forward),  (Pause the playback),  (Play all/Play
to select the USB device you need. one)
3 - Select Videos and select one of video, you
can press OK to play the selected video.
• Select a video and press  INFO to show file
information. Music Options
• Playback a video and press  INFO to show
below: During the music playback, press  OPTIONS to…
Progress bar, Playback control bar,  (Jump to the Shuffle off, Shuffle on
previous video in a folder),  (Jump to the next Play songs in sequential order, or at random.
video in a
Repeat, Play once
folder),  (Playback),  (Rewind),  (Fast
Play songs repeatedly or once.
forward),  (Pause the playback),  (Play all/Play
one),  (Shuffle on/Shuffle off)

33
12 ideal sound settings.
• Audio out - Set the TV to play the sound on TV or
Open TV Setting on the connected audio system.
• Ambilight style* - Select one of preset Ambilight

Menus styles.
• Ambilight+hue* - Switch Ambilight+hue on or off.
• Sleep timer - Set the TV to switch to standby
12.1 automatically after a preset time.
• Screen off - If you only listen to music on TV, you
Home Menu Overview can switch off the TV screen.
Press  (Home) to select one of below menus, then
• Wireless and networks - Connect to your home
press OK.
network or adjust the network settings.
Sources • Picture settings - Adjust all picture settings.
• All settings - View all settings menu.
This row contains available sources in this TV. • Help - Diagnose and get more information about
Watch TV your TV. For more information, in Help, press the
colour key  Keywords and look up Help
This row contains TV functions which are available for Menu for more information.
user.

Apps
All settings menu:
This row contains number of apps pre-installed.
Press  (home) key on the remote control,
Search select Settings > All settings, and press OK.
This row contains an interface to perform the search
within this TV.
* Ambilight setting is only for models which support
Settings Ambilight function.

This row contains settings which are available for

user. 12.3
You can reorder the icons on Home menus. To
reposition icons, press OK. Alternatively, you can
All Settings
select the icon you want to reorder, and hold the OK
key for 3 seconds until the arrows appear around the Picture Settings
icon. Use navigation keys to move the highlighted
icon to another location, then press OK. Press the Picture Style
BACK key to exit.
Select a style
For easy picture adjustment, you can select a preset
12.2 picture style.
Frequent settings and All  (Home) > Settings > Picture style, press OK to
change to next available option.
settings
The available Picture styles are ...
Settings menu: • Personal - The picture preferences you set during
Press  (Home) > Settings key on the remote the first start up
control to find frequent settings. • Vivid - Ideal for daylight viewing
• Natural - Natural picture settings
• How to - Instructions on how to install channels, • Standard - Most energy conscious setting
sort channels, update TV software, connect external • Movie - Ideal for watching movies with original
devices and use Smart functions on your TV. studio effect
• Install channels - Update channels or start a • Game - Ideal for gaming*
complete new channel installation. • Monitor - Ideal for computer monitor**
• Picture style - Select one of preset picture styles
for ideal picture viewing. * Picture style - Game is not available for some video
• Picture format - Select one of preset picture sources.
format which fits the screen. ** Picture style - Monitor is only available when HDMI
• Sound style - Select one of preset sound styles for source video is applicable for PC application. HDR is

34
not supported in Monitor mode. The TV is able to play  (Home) > Settings > All
HDR video in Monitor mode but no HDR processing settings > Picture > Contrast
will be applied.
Press the arrows  (up) or  (down) to adjust the
Custom a style contrast value of the picture.

You can adjust and stored picture settings in in the You can decrease contrast value to reduce power
currently selected picture style, consumption.
like Colour, Contrast or Sharpness.

Restore a style Adjust the picture sharpness

To restore the style to its original setting, go  (Home) > Settings > All
to  (Home) > Settings > All settings > Picture > Sharpness
settings > Picture > Picture style, then
press  Restore style.
Press the arrows  (up) or  (down) to adjust the
sharpness value of the picture.
• The TV can play HDR programmes from any one of
HDMI connections, broadcasting, from an Internet
source (e.g. Netflix) or from a connected USB memory Adjust the picture brightness
device.  (Home) > Settings > All
• The TV will automatically switched to HDR mode settings > Picture > Brightness
with indication. TV supports following HDR formats:
Hybrid Log Gamma, HDR10, HDR10+, and Dolby
Vision but it is subject to the availability of such HDR Press the arrows  (up) or  (down) to set the
format in content providers. level of brightness of the picture signal.

For HDR content (Hybrid Log Gamma, HDR10 and Note: Setting of brightness much away from
HDR10+) reference value (50) may result lower contrast.

The styles for HDR (Hybrid Log Gamma, HDR10 and

HDR10+) content are... Expert mode picture settings

• HDR Personal Colour Settings

• HDR Vivid
• HDR Natural  (Home) > Settings > All
• HDR Movie settings > Picture > Expert mode settings
• HDR Game

Adjust the colour enhancement

For Dolby Vision HDR content
 (Home) > Settings > All
The styles for Dolby Vision HDR content are...
settings > Picture > Expert mode
• HDR Personal settings > Colour enhancement
• HDR Vivid
Select Maximum, Medium, or Minimum to set the
• Dolby Vision Bright
level of the colour intensity and the details in bright
• Dolby Vision Dark
colours.
• HDR Game

Select the preset colour temperature

Colour, Contrast, Sharpness, Brightness
 (Home) > Settings > All
Adjust the picture colour settings > Picture > Expert mode
settings > Colour temperature
 (Home) > Settings > All
settings > Picture > Colour Select Normal, Warm, or Cool to set the colour
temperature for your preference.
Press the arrows  (up) or  (down) to adjust the
colour saturation value of the picture.
Customise colour temperature

Adjust the picture contrast  (Home) > Settings > All

settings > Picture > Expert mode settings >

35
Custom colour temperature
Dynamic Contrast
Select Custom in Colour temperature menu
to customise a colour temperature yourself. Press  (Home) > Settings > All
the arrows  (up) or  (down) to adjust the value. settings > Picture > Expert mode
settings > Dynamic contrast
Select Maximum, Medium, or Minimum to set the
Whitepoint alignment level at which the TV automatically enhances the
details in the dark, middle and light areas of the
 (Home) > Settings > All
picture.
settings > Picture > Expert mode settings >
Whitepoint alignment
Customise the whitepoint alignment based on the Video Contrast, Gamma
selected colour temperature of the picture. Press the
arrows  (up) or  (down) to adjust the value, Video contrast
press  Reset to reset the value.
 (Home) > Settings > All
settings > Picture > Expert mode settings > Video
contrast
Contrast Settings
Press the arrows  (up) or  (down) to adjust the
Contrast Modes video contrast level.

 (Home) > Settings > All

settings > Picture > Expert mode
Gamma
settings > Contrast mode
 (Home) > Settings > All
settings > Picture > Expert mode
Select Normal, Optimized for picture, Optimized for
settings > Gamma
energy saving to set the TV automatically reduces
the contrast, for best power consumption or for best Press the arrows  (up) or  (down) to set a non-
picture experience, or select Off to switch off the linear setting for picture luminance and contrast.
adjustment.

Ultra Resolution
HDR Settings
 (Home) > Settings > All
 (Home) > Settings > All settings > Picture > Expert mode settings > Ultra
settings > Picture > Expert mode settings > HDR resolution
Plus Select On to have a superior sharpness in line
edges and details.
Set HDR Plus to Off, Minimum, Medium,
Maximum or Automatic to set the level at which the
TV automatically shows superior contrast and Picture Clean
brightness effect for HDR content.
Noise reduction
Note: Available when High Dynamic Range (HDR)
video is present in selected source except Dolby  (Home) > Settings > All
Vision case. settings > Picture > Expert mode settings > Noise
reduction
• The TV can play HDR programmes from any one of
HDMI connections, broadcasting, from an Internet Select Maximum, Medium, Minimum to set the
source (e.g. Netflix) or from a connected USB memory level for removing the noise in video content.
device. Noise is mostly visible as small moving dots in on-
• The TV will automatically switched to HDR mode screen picture.
with indication. TV supports following HDR formats:
Hybrid Log Gamma, HDR10, HDR10+, and Dolby
Vision but it is subject to the availability of such HDR MPEG Artefact Reduction
format in content providers.
 (Home) > Settings > All
settings > Picture > Expert mode
settings > MPEG Artefact Reduction
Select Maximum, Medium, Minimum to have

36
different degress of smoothing the artefects in digital extreme picture formats can still show black bars.
video content. Picture content aspect ratio may change.
MPEG artefacts are mostly visible as small blocks or • Fit to screen – automatically zooms in the picture
jagged edges in on-screen images. to fill the screen without distortion. Black bars may be
visible. Not supported for PC input.

Motion Settings • Original – automatically zooms in the picture to fit

the screen with original aspect ratio. No content lost
Motion Styles visible.
 (Home) > Settings > All  (Home) > Settings > All
settings > Picture > Expert mode settings > Picture > Picture format > Advanced
settings > Motion Styles
To format the picture manually…
Motion styles provides optimised motion setting
• Shift – select on the arrows to shift the picture. You
modes for different video content.
can only shift the picture when it is zoomed in.
Select Off to switch off or select one of the motion • Zoom – select on the arrows to zoom in.
styles to have different viewing experience on motion • Stretch – select on the arrows to stretch the
video. picture vertically or horizontally.
(Movie, Sports, Standard, Smooth or Personal) • Undo – select to return to the picture format you
started with.
Not available for below cases:
•  (Home) > Settings > All settings > Picture
style > Game.
Dolby Vision Notification
•  (Home) > Settings > All settings > Picture
style > Monitor.  (Home) > Settings > All settings > Picture >
Dolby Vision Notification
Natural Motion Switch On or Off the Dolby Vision notification when
 (Home) > Settings > All Dolby Vision content begins to play on your TV.
settings > Picture > Expert mode
settings > Natural Motion
Quick Picture Settings
Natural Motion makes any movement smooth and
fluent.  (Home) > Settings > All
• Select Maximum, Medium, Minimum to have settings > Picture > Quick picture settings
different degress for reducing the motion judder, • During the first installation, you did some picture
visible in movies on TV. settings in a few easy steps. You can redo these steps
• Select Minimum or Off when noise appears in with Quick picture settings menu.
playing moving picture on-screen. • Select the picture setting you prefer and go to the
Note: Only available when Motion styles set next setting.
to Personal. • To do these steps, make sure the TV can tune to a
TV channel or can show a programme from a
connected device.
Picture Format

 (Home) > Settings > All Sound Settings

settings > Picture > Picture format
If the picture is not filling the whole screen, if black Sound Style
bars are showing on the top or bottom or at both
sides, you can adjust the picture to fill the screen Select a style
completely. For easy sound adjustment, you can select a preset
To select one of the basic settings to fill the screen… sound style.

• Wide screen – automatically zooms in the picture  (Home) > Settings > All
to 16:9 full screen. Picture content aspect ratio may settings > Sound > Sound style
change. The available sound styles are ...
• Fill screen – automatically enlarges the picture to
fill the screen. Picture distortion is minimal, subtitles • AI mode - Select AI mode for intelligent switching of
remain visible. Not suitable for PC input. Some sound style based on audio content.

37
• Original - Most neutral sound setting Select On a TV stand or On the wall to have best
• Movie - Ideal for watching movies sound reproduction according to the setting.
• Music - Ideal for listening to music
• Game - Ideal for gaming
• News - Ideal for speech Advanced sound settings
• Personal mode - Select to check more advanced
sound settings Volume Control

Restore Personal mode Auto volume

1 - Set the sound style to Personal mode.  (Home) > Settings > All
2 - Press the colour key  Restore Style, and settings > Sound > Advanced > Auto volume
press OK. The style is restored.
Select On to automatically level out sudden volume
Customise Personal style differences. Typically when you are switching
1 - Set the sound style to Personal mode. channels. Select Night mode for a more
2 - Press the colour key  Customise, and press OK comfortable quiet listening experience.
to change advanced sound settings.

Delta volume
Personal Mode Sound Settings
 (Home) > Settings > All
Speaker virtualizer settings > Sound > Advanced > Delta volume

 (Home) > Settings > All The Delta volume setting can be used to adjust to
settings > Sound > Personal mode settings > balance the sound level difference between the TV
Speaker virtualizer channel and the HDMI source input. Press the
arrows  (up) or  (down) to adjust the delta
Select On or Auto (Dolby Atmos) to enable Dolby value for TV speaker volume.
Atmos which can add height dimension in sound.
With height dimension, sound can be precisely placed * Note: Delta volume is available when the input
and moved in three-dimensional space. source is set to HDMI or Analogue sources and the
Audio out is set to TV speakers or HDMI sound
system.
Clear dialogue
 (Home) > Settings > All
Audio Out Settings
settings > Sound > Personal mode
settings > Clear dialogue  (Home) > Settings > All
Select On to improve the sound for speech. Ideal for settings > Sound > Advanced > Audio out
news programmes. Set the TV to play the sound on TV or on the
connected audio system.
You can select where you want to hear the TV sound
Equalizer
and how you want to control it.
 (Home) > Settings > All • If you select TV Speakers off, you permanently
settings > Sound > Personal mode switch off the TV speakers.
settings > Equalizer • If you select TV Speakers, the TV speakers are
always on. All the sound related settings are
Press the arrows  (up) or  (down) to adjust the
applicable to this mode.
equalizer settings.
• If you select Headphones, the sound will be played
through headphones.
* Note: To restore the Personal mode to its original • If you select TV Speakers + Headphones, the sound
setting, select back to Sound style, then will be played through TV speakers and
press  Restore style. headphones.
To adjust the volume of TV speakers or headphones,
press Volume and press the arrows  (right) or 
TV Placement (left) to select the output source you want to adjust.
Press the arrows  (up) or  (down) to adjust the
 (Home) > Settings > All settings > Sound > TV volume.
placement
With an audio device connected with HDMI CEC,
select HDMI sound system. The TV will switch off

38
the TV speakers when the device is playing the • If you cannot set a delay on the Home Theatre
sound. System, you can set the TV to sync the sound.
• You can set an offset that compensates for the time
necessary for the Home Theatre System to process
the sound of the TV picture.
• You can set the value in steps of 5ms. Maximum
Digital Output Settings setting is 60ms.
Digital output settings are available for SPDIF output
(optical) and HDMI ARC sound signals.

Digital out fomat

Channels
 (Home) > Settings > All HbbTV Settings - Hybrid Broadcast Broadband TV
settings > Sound > Advanced > Digital out format
 (Home) > Settings > All Settings > Channels
Set the audio out signal of the TV to fit the sound > HbbTV settimgs > HbbTV
capabilities of the connected Home Theatre System.
• Stereo (uncompressed): If your audio playback If a TV Channel offers HbbTV services, you must first
devices have no multichannel sound processing, switch on HbbTV in the TV settings to access to these
select to only output stereo content to your audio advanced services, e.g. video on-demand and catch-
playback devices. up TV services.
• Multichannel: Select to output multichannel audio
content (compressed multichannel sound signal) or
stereo audio content to your audio playback devices.  (Home) > Settings > All
• Multichannel (bypass): Select to send original Settings > Channels > HbbTV settimgs > HbbTV
bitstream from HDMI ARC to the connected HDMI tracking
Sound System.
- Make sure your audio playback devices support Switch the tracking of HbbTV browsing behaviour on
Dolby Atmos feature. or off. Switching off will inform the HbbTV services not
- SPDIF output (DIGITAL AUDIO OUT) will be to track your browsing behaviour.
disabled when streaming Dolby Digital Plus content.

 (Home) > Settings > All

Settings > Channels > HbbTV settimgs > HbbTV
Digital out levelling
cookies
 (Home) > Settings > All
settings > Sound > Advanced > Digital out
Switch the storage of third-party cookies, site data
levelling
and cache from HbbTV services on or off.
Adjust the loudness level from device which is
connected to digital audio output (SPDIF) or HDMI.
 (Home) > Settings > All
• Select More to have louder volume.
Settings > Channels > HbbTV settimgs > Clear
• Select Less to have softer volume.
approved app listing

Digital out delay Allow you to clear the list of HbbTV applications that
you have allowed to be launched on the TV.
 (Home) > Settings > All
settings > Sound > Advanced > Digital out delay
For some Home Theatre Systems you might need to CAM Operator Profile
adjust the audio sync delay to synchronise the audio
to the video. Select Off if a sound delay is set on  (Home) > Settings > All Settings > Channels
your Home Theatre System. > CAM Operator Profile
To switch on operator profile for CI+/CAM for easy
channel installation and updates.
Digital out offset (Only available when Digital out
delay set to On)
 (Home) > Settings > All
settings > Sound > Advanced > Digital out offset

39
 control > On
General Settings
Connection Related Settings Note:

Format USB Hard Drive - EasyLink might not work with devices from other
brands.
 (Home) > Settings > All settings > General
- The HDMI CEC functionality has different names on
settings > Format USB Hard Drive
different brands. Some examples are: Anynet, Aquos
You need to set up and format a USB Hard Drive Link, Bravia Theatre Sync, Kuro Link, Simplink and
before you record a channel. Viera Link. Not all brands are fully compatible with
EasyLink. Example HDMI CEC branding names are
property of their respective owners.
USB Keyboard Settings

 (Home) > Settings > All settings > General HDMI Ultra HD
settings > USB keyboard settings
 (Home) > Settings > All settings > General
To install the USB keyboard, switch on the TV and
settings > Input sources > HDMI (port) > HDMI Ultra
connect the USB keyboard to one of
HD
the USB connections on the TV. When the TV
detects the keyboard for the first time, you can select This TV can display Ultra HD signals. Some devices -
your keyboard lay-out and test your selection. connected with HDMI - do not recognise a TV with
Ultra HD and might not work correctly or show
distorted picture or sound.
Mouse Settings To avoid the malfunctioning of such a device, you can
adjust HDMI Ultra HD setting when TV is in the HDMI
 (Home) > Settings > All settings > General
source. Recommended setting for legacy device is
settings > Mouse settings
Standard.
Adjust the motion speed of the USB mouse.
• The setting Optimal allows maximum up to Ultra HD
(50Hz or 60Hz) RGB 4:4:4 or YCbCr 4:4:4/4:2:2/4:2:0
signals.
HDMI-CEC Connection - EasyLink • The setting Standard allows maximum up to Ultra
HD (50Hz or 60Hz) YCbCr 4:2:0 signals.
Connect HDMI CEC-compatible devices to your TV,
you can operate them with the TV remote
control. EasyLink HDMI CEC must be switched on on
Maximum supported video timing format for HDMI
the TV and the connected device.
Ultra HD options:
• Resolution: 3840 x 2160
• Frame rate (Hz): 50Hz, 59.94Hz, 60Hz
• Video data sub-sampling (bit-depth)
- 8 bit: YCbCr 4:2:0, YCbCr 4:2:2*, YCbCr 4:4:4*, RGB
4:4:4*
- 10 bit: YCbCr 4:2:0*, YCbCr 4:2:2*
- 12 bit: YCbCr 4:2:0*, YCbCr 4:2:2*
* Supported only when HDMI Ultra HD is set
to Optimal.
Note: To watch HDR10+ or Dolby Vision content from
HDMI source, you may need to power off your player
Switch on EasyLink and power on again when the player connected to TV
 (Home) > Settings > All settings > General playing such content for the first time. HDR10+ or
settings > EasyLink > EasyLink > On Dolby Vision content is supported only when HDMI
Ultra HD is set to Optimal .

Operate HDMI CEC-compatible devices with TV

remote control
 (Home) > Settings > All settings > General
settings > EasyLink > EasyLink remote

40
Eco Settings Adjust Picture and audio
 (Home) > Settings > All settings > General
Set energy saving level settings > Shop setup > Picture and audio
 (Home) > Settings > All settings > General Select Optimized to shop or Custom settings for
settings > Eco settings > Energy saving picture and audio settings.
Select Minimium, Medium, or Maximium to have
different degress for energy saving, or select Off to
switch off energy saving mode. Logos and banner
 (Home) > Settings > All settings > General
settings > Shop setup > Logos and banner
Set screen off to save energy consumption
 (Home) > Settings > All settings > General Set to display Feature logos and Promotional banner.
settings > Eco settings > Screen off
Select Screen off, the TV screen is switched off, to
switch the TV screen back on, press any key on the Demo Me autostart
remote control.
 (Home) > Settings > All settings > General
settings > Shop setup > Demo Me autostart

Set TV switch off timer Turn On/Off the Demo Me autostart.

 (Home) > Settings > All settings > General

settings > Eco settings > Switch off timer
Manage demos
Press the arrows  (up) or  (down) to adjust the
value. The value 0 (Off) deactivates the automatic  (Home) > Apps > Demo me > Manage demos
switch off. If the TV is set to Shop, you can manage the demo
Select Switch off timer, the TV switches off videos in Demo me app.
automatically to save energy.
• TV switches off if receiving a TV signal but you don't
Play demo video
press a key on the remote control during a 4 hour
period.  (Home) > Apps > Demo me > Manage demos >
• TV switches off if not receiving a TV signal nor a Play
remote control command for 10 minutes. Select a demo video file and play.
• If you use the TV as a monitor or use a digital
Copy demo file
receiver to watch TV (a Set-Top Box - STB) and you
do not use the remote control of the TV, you should  (Home) > Apps > Demo me > Manage demos >
deactivate this automatic switch off, to set the value Copy to USB
to 0. Copy demo file to USB drive.

Delete demo file

Location - Home or Shop  (Home) > Apps > Demo me > Manage demos >
Delete
 (Home) > Settings > All settings > General Delete demo file from your TV.
settings > Location
• Select the location of your TV Configuration of demo
• Select Shop, the picture style is switched back  (Home) > Apps > Demo me > Manage demos >
to Vivid, and can adjust shop settings. Configuration
• Shop mode is for in-store promotion. Set the TV to Main TV or Sub TV.

Download new demo file

Shop Setup  (Home) > Apps > Demo me > Manage demos >
Download new
 (Home) > Settings > All settings > General If the Configuration is set to Main TV, you can
settings > Shop setup download new demo file.
If the TV is set to Shop, you can view feature logos or
Auto delay setting
set the availablility of a specific demo for in store use.
 (Home) > Apps > Demo me > Manage demos >

41
Auto delay setting Digital TV channels can broadcast audio with several
Set the Auto delay time from 15 seconds to 5 minutes. spoken languages for a programme. You can set a
preferred primary and secondary audio language. If
Auto loop selection audio in one of these languages is available, the TV
 (Home) > Apps > Demo me > Manage demos > will switch to this audio.
Auto loop selection
Select a demo file for auto loop playing.
Set subtitle preference language
 (Home) > Settings > All settings > Region and
HDMI Auto game mode language > Language > Primary
subtitle, Secondary subtitle
 (Home) > Settings > All settings > General
settings > Input sources > HDMI (port) > HDMI Auto Digital channels can offer several subtitle languages
game mode for a programme. You can set a preferred primary and
secondary subtitle language. If subtitles in one of
Set HDMI Auto game mode to On, if you want TV to
these languages are available, the TV will show the
automatically set Picture style to Game whenever it is
subtitles you selected.
informed by the HDMI device connected to TV. This
feature is only selectable when HDMI Ultra HD set to
Optimal.
Set teletex preference language
 (Home) > Settings > All settings > Region and
Reset TV Settings and Reinstall TV language > Language > Primary text, Secondary
text
Reset all settings value to original TV settings Some digital TV broadcasters have several Text
 (Home) > Settings > All settings > General languages available.
settings > Factory settings

Clock
Redo full TV installation , and set TV status back to
the first time you switch on  (Home) > Settings > All settings > Region and
language > Clock
 (Home) > Settings > All settings > General
settings > Reinstall TV
Enter PIN code and select Yes, the TV will reinstall Correct clock automatically
completely. All settings will be reset and installed
 (Home) > Settings > All settings > Region and
channels will be replaced. The installation can take a
language > Clock > Auto clock mode
few minute
• The standard setting for the TV clock is Automatic.
The time information comes from the broadcasted
UTC - Coordinated Universal Time information.
Region and Language Settings • If the clock is not correct, you can set the TV clock
to Country dependent.
Language • When select Country dependent, you can set the
 (Home) > Settings > All settings > Region and time for Automatic, Standard time, or Daylight saving
language > Language time.

Change the language of the TV menu and Correct clock manually

messages  (Home) > Settings > All settings > Region and
 (Home) > Settings > All settings > Region and language > Clock > Auto clock mode > Manual
language > Language > Menu language  (Home) > Settings > All settings > Region and
language > Clock > Date, Time
Go to previous menu, and select Date and Time to
Set audio preference language
adjust the value.
 (Home) > Settings > All settings > Region and
Note:
language > Language > Primary audio, Secondary
audio • If none of the automatic settings display the time

42
correctly, you can set the time manually. commentary describing what is happening on screen.
• If you schedule recordings from the TV Guide, we
recommend not to change the time and date
manually.  (Home) > Settings > All settings > Universal
access > Audio description > Audio
description > Mixed volume, Audio effects, Speech
Set time zone or set a time offset for your region • Select Mixed volume, you can mix the volume of
 (Home) > Settings > All settings > Region and the normal audio with the audio commentary. Press
language > Clock > Time zone the arrows  (up) or  (down) to adjust the value.
• Set Audio effect to On for extra audio effects in
Select one of the time zones. the commentary audio, like stereo or fading sound.
• Select Speech to set speech
preference, Descriptive or Subtitles.
Set the TV to switch to Standby automatically after a
preset time
 (Home) > Settings > All settings > Region and Dialogue enhancement
language > Clock > Sleep timer.  (Home) > Settings > All settings > Universal
Set the TV to switch to Standby automatically after a access > Dialogue enhancement
preset time. With the slider bar you can set the time Increase the intelligibility of dialogue and
to up to 180 minutes in increments of 5 minutes. If set commentary.
to 0 minutes, the sleep timer is switched off. You can
always switch off your TV earlier or reset the time
during the countdown
Lock Settings
Set Code and Change Code
Universal Access Settings
 (Home) > Settings > All settings > Child
 (Home) > Settings > All settings > Universal
lock > Set code, Change code
access
Set new code or reset change code. The child lock
With Universal Access switched on, the TV is
code is used to lock or unlock channels or
prepared for use for the deaf, hard of hearing, blind or
programmes.
partially sighted people.
Note: If you forgot your PIN code, you can override
the current code use 8888 and enter a new code.
Switch on universal access settings
 (Home) > Settings > All settings > Universal
access > Universal access > On. Lock for Programme

 (Home) > Settings > All settings > Child

lock > Parental rating
Universal access for hearing impaired people
Set a minumum age to watch rated programmes.
 (Home) > Settings > All settings > Universal
access > Hearing impaired > On
• Some digital TV channels broadcast special audio App lock
and subtitles adapted for the hard of hearing or deaf
people.  (Home) > Settings > All settings > Child
• Switched on, the TV automatically switches to the lock > App lock
adapted audio and subtitles, if available.
You can lock apps unsuited for children. The App lock
will ask for a PIN code when you try to start an 18+
Universal access for blind or partially sighted rated app. This lock is only valid for 18+ rated apps
from the Philips apps.
people
 (Home) > Settings > All settings > Universal
access > Audio description > Audio description >
On
Digital TV channels can broadcast special audio

43
Set code

 (Home) > Settings > All settings > Child

lock > Set code
Set the PIN code to lock or unlock the TV.

44
13 select OK to make the connection immediately.
3 - A message will be shown when the connection is
Wireless and successful.

Networks Make the Connection - WPS

 (Home) > Settings > All settings > Wireless and
13.1
networks > Connect to network > WPS
Home Network If your router has WPS, you can directly connect to
the router without scanning for networks. If you have
To enjoy the full capabilities of your Philips Smart TV,
devices in your wireless network that use the WEP
your TV must be connected to the Internet.
security encryption system, you cannot use WPS.
Connect the TV to a home network with a high-speed
1 - Go to the router, press the WPS button and return
Internet connection. You can connect your TV
to the TV within 2 minutes.
wirelessly or wired to your network router.
2 - Select Connect to make the connection.
3 - A message will be shown when the connection is
successful.
13.2

Connect to Network
Make the Connection - WPS with PIN Code
Wireless Connection  (Home) > Settings > All settings > Wireless
and networks > Connect to network > WPS with
What You Need PIN Code

To connect the TV to the Internet wirelessly, you need If your router has WPS with a PIN code, you can
a Wi-Fi router with a connection to the Internet. Use directly connect to the router without scanning for
a high-speed (broadband) connection to the Internet. networks. If you have devices in your wireless
network that use the WEP security encryption system,
you cannot use WPS.
1 - Write down the 8-digit PIN code shown on screen
and enter it in the router software on your PC. Consult
the router manual on where to enter the PIN code in
the router software.
2 - Select Connect to make the connection.
3 - A message will be shown when the connection is
successful.

Turn Wi-Fi On or Off

Wired Connection
 (Home) > Settings > All settings > Wireless and
networks > Wi-Fi On/Off What You Need
To connect the TV to the Internet, you need a
network router with a connection to the
Make the Connection Internet. Use a high-speed (broadband) connection
to the Internet.
Make the Connection - Wireless
 (Home) > Settings > All settings > Wireless
and networks > Connect to network > Wireless
1 - In the list of found networks, select on your
wireless network. If your network is not in the list
because the network name is hidden (you switched
off the SSID broadcast of the router), select Add New
Network to enter the network name yourself.
2 - Depending on the type of router, enter your
encryption key - WEP, WPA or WPA2. If you entered
the encryption key for this network before, you can

45
 connection.
2 - You can set the number for IP
Address, Netmask, Gateway, DNS 1, or DNS 2.

Switch On with Wi-Fi (WoWLAN)

 (Home) > Settings > All settings > Wireless
and networks > Switch On with Wi-Fi (WoWLAN)
You can switch this TV on from your smartphone or
tablet if the TV is in Standby. The setting Switch On
with Wi-Fi (WoWLAN) must be switched on.

Make the Connection Digital Media Renderer - DMR

 (Home) > Settings > All settings > Wireless  (Home) > Settings > All settings > Wireless
and networks > Connect to network > Wired and networks > Digital Media Renderer - DMR
1 - Connect the router to the TV with a network cable If your media files do not play on your TV, make sure
(Ethernet cable**). that the Digitial Media Renderer is switched on. As a
2 - Make sure that the router is switched on. factory setting, DMR is switched on.
3 - The TV constantly searches for the network
connection.
4 - A message will be shown when the connection is Switch on Wi-Fi connection
successful.
 (Home) > Settings > All settings > Wireless
If the connection fails, you can check the DHCP and networks > Wi-Fi On/Off
setting of the router. DHCP should be switched on.
You can switch on or off Wi-Fi connection on your
**To fulfill EMC regulations, use a shielded FTP Cat. TV.
5E Ethernet cable.

Reset Wi-Fi Miracast connection

13.3
 (Home) > Settings > All settings > Wireless
Wireless and Network and networks > Reset Wi-Fi Miracast connection
Settings Clear the list of connected and blocked devices that
are used with Miracast.
View Network Settings
 (Home) > Settings > All settings > Wireless TV network name
and networks > View network settings
 (Home) > Settings > All settings > Wireless
You can view all current network settings here. The IP and networks > TV network name
and MAC address, signal strength, speed, encryption
method, etc. If you have more than one TV in your home network,
you can give the TV a unique name.

Network Configuration - Static IP

Netflix settings
 (Home) > Settings > All settings > Wireless
and networks > Network Configuration > Static IP  (Home) > Settings > All settings > Wireless
and networks > Netflix settings
If you are an advanced user and want to install your
network with Static IP addressing, set the TV to Static With Netflix settings, you can view ESN number or
IP. deactive Netflix device.

Network Configuration - Static IP Configuration Clear Internet Memory

 (Home) > Settings > All settings > Wireless  (Home) > Settings > All settings > Wireless
and networks > Static IP configuration and networks > Clear Internet Memory

1 - Select Static IP configuration and configure the With Clear Internet Memory you clear your Philips

46
server registration and parental rating settings, your
video store app logins, all Philips App Gallery
favourites, Internet bookmarks and history. Interactive
MHEG applications can also save so-called 'cookies',
on your TV. These files will also be cleared.

47
14 Search

Smart TV With Search, you can search the App Gallery for
relevant Apps.
Enter a keyword in the text field, select  and
14.1 press OK to start searching. You can enter names,
Setup Smart TV titles, genres and description keywords to search.
Alternatively, you can leave the text field empty and
The first time you open Smart TV, you need to search for the most popular searches/keywords for a
configure your connection. Read and agree to the range of categories. In the list of found keywords,
terms and conditions to continue. select a keyword and press OK to search for items
with that keyword.
The Smart TV start page is one of your links to the
Internet.

Open Smart TV
To open the Smart TV start page, press  Smart TV .
Alternatively, you can press  (Home) > Apps,
select  Smart TV and press OK.
The TV connects to the Internet and opens the Smart
TV start page. This may take a few seconds.

Close Smart TV
To close the Smart TV start page, press EXIT.
TP Vision Europe B.V. bears no responsibility
regarding the content and the quality of the content
provided by the content service providers.

14.2

Smart TV Start Page

Your Apps
You start Apps from the Smart TV start page.

Internet
The Internet App opens the World Wide Web on your
TV.
On your TV, you can view any Internet website but
most of them are not tailored for a TV screen.
- Some plug-ins (e.g. to view pages or videos) are not
available on your TV.
- Internet pages are shown one page at a time and
full screen.

14.3

App Gallery
Open the App Gallery in home screen to browse
the Apps, the collection of tailored websites for TV.
Find the App for YouTube videos, a national
newspaper, an online photo album, etc. There are
Apps to rent a video from an online video store and
Apps for watching programmes you missed. If the
App gallery does not hold what you are looking for,
try the World Wide Web and surf the Internet on TV.

48
15

TV on Demand /
Video on Demand
TV on Demand
 (Home) > Apps > TV on Demand
You can watch TV programmes you missed or watch
your favourite programmes whenever it suits you
best.

Video on Demand
 (Home) > Apps > Video on Demand
You can rent movies from an online rental video store.
The app is only available in Russian Federation and
India.

49
16

Netflix
If you have a Netflix menbership subscription, you
can enjoy Netflix on this TV. Your TV must be
connected to the Internet.
To open Netflix, press  to open the Netflix
App. You can open Netflix immediately from a TV in
standby.
www.netflix.com

50
17

Rakuten TV
Watch the latest new releases on your Smart TV. The
biggest blockbusters, award winning classics and TV
series available instantly.
Press the  key on your remote control or the
app icon to open the Rakuten TV app. Your TV must
be connected to the Internet to use the app. For more
information about Rakuten TV, please visit
www.rakuten.tv.

51
18

Amazon Prime
Video
With an Amazon prime membership, you gain access
to thousands of popular movies and TV show,
including exclusive Prime Originals.
Press the app icon to open the Amazon Prime Video
app. Your TV must be connected to the Internet to
use the app. For more information about Amazon
Prime Video, please visit www.primevideo.com.

52
19

YouTube
YouTube provides a platform to connect to the world.
Watch and discover popular videos that uploaded by
YouTube users around the world. Use the YouTube
app to explore the latest topics on music, news, and
more.

Press the app icon to open the YouTube app. Your TV

must be connected to the Internet to use the app.
For more information about YouTube, please visit
www.youtube.com.

53
20 * Energy consumption kWh per year, based on the
power consumption of the television operating 4
Environmental hours per day for 365 days. The actual energy
consumption depends on how the television is used.
20.1 ** When the TV is turned off with the remote control
and no function is active.
European Energy Label
The European Energy Label informs you on the 20.3
energy efficiency class of this product. The greener
the energy efficiency class of this product is, the End of Use
lower the energy it consumes.
On the label, you can find the energy efficiency class, Disposal of your old product and batteries
the average power consumption of this product in use
and the average energy consumption for 1 year. You Your product is designed and manufactured with high
can also find the power consumption values for this quality materials and components, which can be
product on the Philips website for your country recycled and reused.
at www.philips.com/TVsupport

20.2

Product Fiche
43PUS6504
• Energy Efficiency Class : A When this crossed-out wheeled bin symbol is
• Visible Screen Size : 108 cm / 43 inch attached to a product it means that the product is
• On Mode Power Consumption (W) : 71 W covered by the European Directive 2012/19/EU.
• Annual Energy Consumption (kWh) * : 104 kWh
• Standby Power Consumption (W) ** : 0.3 W
• Display Resolution (Pixels) : 3840 x 2160
50PUS6504
• Energy Efficiency Class : A+
• Visible Screen Size : 126 cm / 50 inch
• On Mode Power Consumption (W) : 72 W
• Annual Energy Consumption (kWh) * : 106 kWh
• Standby Power Consumption (W) ** : 0.3 W
• Display Resolution (Pixels) : 3840 x 2160
58PUS6504
Please inform yourself about the local separate
• Energy Efficiency Class : A+
collection system for electrical and electronic
• Visible Screen Size : 146 cm / 58 inch
products.
• On Mode Power Consumption (W) : 72 W
• Annual Energy Consumption (kWh) * : 106 kWh Please act according to your local rules and do not
• Standby Power Consumption (W) ** : 0.3 W dispose of your old products with your normal
• Display Resolution (Pixels) : 3840 x 2160 household waste. Correct disposal of your old
65PUS6504 product helps to prevent potential negative
• Energy Efficiency Class : A+ consequences for the environment and human
• Visible Screen Size : 164 cm / 65 inch health.
• On Mode Power Consumption (W) : 98 W Your product contains batteries covered by the
• Annual Energy Consumption (kWh) * : 144 kWh European Directive 2006/66/EC, which cannot be
• Standby Power Consumption (W) ** : 0.3 W disposed with normal household waste.
• Display Resolution (Pixels) : 3840 x 2160
70PUS6504
• Energy Efficiency Class : A+
• Visible Screen Size : 178 cm / 70 inch
• On Mode Power Consumption (W) : 111 W
• Annual Energy Consumption (kWh) * : 163 kWh
• Standby Power Consumption (W) ** : 0.3 W
• Display Resolution (Pixels) : 3840 x 2160

54
Please find out for yourself about the local rules on
separate collection of batteries because correct
disposal will help to prevent negative consequences
for the environment and human health.

55
21 21.4

Specifications Supported Input Resolution -

Video
21.1

Power Support Timing

Product specifications are subject to change without Video support timing also includes field/frame rate
notice. For more specification details of this product, 23.976Hz, 29.97Hz and 59.94Hz.
see www.philips.com/TVsupport

Power
• Mains power : AC 220-240V +/-10% HDMI
• Ambient temperature : 5°C to 35°C
• 480i
For power consumption information, see • 480p
chapter Product Fiche. • 576i
• 576p
• 720p
21.2 • 1080i
• 1080p
Reception • 3840 x 2160p - 24Hz, 25Hz, 30Hz, 50Hz, 60Hz
• Aerial input : 75 ohm coaxial (IEC75)
• Tuner bands : Hyperband, S-Channel, UHF, VHF
• DVB : DVB-T2, DVB-C (cable) QAM HDMI - UHD
• Analogue video playback : SECAM, PAL
• Digital video playback : MPEG2 SD/HD (ISO/IEC  (Home) > Settings > General settings > Input
13818-2), MPEG4 SD/HD (ISO/IEC 14496-10), HEVC* sources > HDMI (port) > HDMI Ultra HD
• Digital audio playback (ISO/IEC 13818-3) This TV can display Ultra HD signals. Some devices -
• Satellite aerial input : 75 ohm F-type connected with HDMI - do not recognise a TV with
• Input frequency range : 950 to 2150MHz Ultra HD and might not work correctly or show
• Input level range : 25 to 65 dBm distorted picture or sound.
• DVB-S/S2 QPSK, symbol rate 2 to 45M symbols,
SCPC and MCPC To avoid the malfunctioning of such a device, you can
• LNB : DiSEqC 1.0, 1 to 4 LNBs supported, Polarity set the signal quality to a level the device can handle.
selection 14/18V, Band selection 22kHz, Tone burst If the device is not using Ultra HD signals, you can
mode, LNB current 300mA max switch off Ultra HD for this HDMI connection.

* Only for DVB-T2, DVB-S2 • The setting Optimal allows maximum up to Ultra HD
(50Hz or 60Hz) RGB 4:4:4 or YCbCr 4:4:4/4:2:2/4:2:0
signals.
21.3 • The setting Standard allows maximum up to Ultra
HD (50Hz or 60Hz) YCbCr 4:2:0 signals.
Display Resolution
Diagonal screen size
• 43PUS6504 : 108 cm / 43 inch Component, Composite
• 50PUS6504 : 126 cm / 50 inch
Composite
• 58PUS6504 : 146 cm / 58 inch
• 65PUS6504 : 164 cm / 65 inch • PAL, NTSC, SECAM
• 70PUS6504 : 178 cm / 70 inch Component
Display resolution
• 480i - 60Hz
• 3840 x 2160
• 480p - 60Hz
• 576i - 50Hz
• 576p - 50Hz
• 720p - 50Hz, 60Hz
• 1080i - 50Hz, 60Hz
• 1080p - 50Hz, 60Hz

56
21.5 • Image Codec : JPEG, GIF, PNG, BMP, HEIF, 360
photo
Supported Input Resolution - Wi-Fi Certified
Computer This TV supports Miracast certified devices.

• 640 x 480 - 60Hz Performance may vary, depending on the capabilities

• 800 x 600 - 60Hz of the mobile device and the software used.
• 1024 x 768 - 60Hz
• 1280 x 800 - 60Hz
21.8
• 1280 x 960 - 60Hz
• 1280 x 1024 - 60Hz Connectivity
• 1366 x 768 - 60Hz
• 1440 x 900 - 60Hz TV Side
• 1920 x 1080 - 60Hz • Common Interface slot: CI+/CAM
• 3840 x 2160 - 60Hz • USB 2 - USB 3.0
Note: For HDMI Input only • HDMI 3 in - UHD - HDR
• Headphones - Stereo mini-jack 3.5mm
TV Rear
21.6 • YPbPr : Y Pb Pr, Audio L/R
• CVBS : CVBS, Audio L/R (Shared with YPbPr)
Sound TV Bottom
• Dolby Atmos® Virtualizer • Audio out - Optical Toslink
• Clear Dialogue • USB 1 - USB 2.0
• A.I Sound • Network LAN - RJ45
• 5 Band Equalizer • Satellite tuner
• Output power (RMS) : 20W • Antenna (75 ohm)
• Dolby® Audio • HDMI 1 in - ARC - UHD - HDR
• DTS® • HDMI 2 in - UHD - HDR

21.7

Multimedia
Connections
• USB 2.0 / USB 3.0
• Ethernet LAN RJ-45
• Wi-Fi 802.11n (built-in)
Supported USB file systems
• FAT, NTFS
Playback formats
• Video Codec : AVI, MKV, H.264/MPEG-4 AVC,
MPEG1, MPEG2, MPEG4, WMV9/VC1, VP9, HEVC
(H.265)
• Audio Codec : MP3, WAV, AAC, WMA (v2 up to
v9.2), WMA-PRO (v9 and v10)
• Subtitles :
- Format: SRT, SMI, SSA, SUB, ASS, TXT
- Character encodings : UTF-8, Central Europe and
Eastern Europe (Windows-1250), Cyrillic
(Windows-1251), Greek (Windows-1253), Turkish
(Windows-1254), Western Europe (Windows-1252)
• Maximum Supported Data Rate :
– MPEG-4 AVC (H.264) is supported up to High
Profile @ L5.1. 30Mbps
– H.265 (HEVC) is supported up to Main / Main 10
Profile up to Level 5.1 40Mbps
– VC-1 is supported up to Advanced Profile @ L3

57
22 respond to the remote control.
Creaking sound at startup or switch off
Troubleshooting When you are turning the TV on or standby, you hear
a creaking sound from the TV chassis. The creaking
22.1 sound is due to the normal expansion and
Tips contraction of the TV as it cools and warms up. This
does not affect performance.
If you can't find a solution for your TV problem in The TV goes back to standby after showing the
Troubleshooting, you can use  Keywords in Help Philips startup screen
> User manual to find the information you are looking
for. Select a keyword to go the most relevant page in When the TV is in standby, a Philips startup screen is
the User manual. displayed, then the TV returns to standby mode. This
is normal behaviour. When the TV is disconnected
If the User manual doen't answer your question, you and reconnected to the power supply, the startup
can go to the support website of Philips. screen is displayed at the next startup. To switch on
To solve any Philips TV related problem, you can the TV from standby, press  (Standby / On) the
consult our online support. You can select your remote control or the TV.
language and enter your product model number.
The standby light keeps on blinking
Go to www.philips.com/TVsupport.
Disconnect the power cable from the power outlet.
On the support site you can find your country's Wait 5 minutes before you reconnect the power
telephone number to contact us as well as answers to cable. If the blinking reoccurs, contact Philips TV
frequently asked questions (FAQs). In some countries, Consumer Care.
you can chat with one of our collaborators and ask In Help > User manual, press the colour
your question directly or send a question by email. key  Keywords and look up Contact Info.
You can download new TV software or the manual to
read on your computer. TV switches off by itself

For more TV troubleshooting and frequently asked If the TV switches off suddenly, the setting Switch off
questions (FAQs)... timer might be switched on. With Switch off
timer the TV switches off after 4 hours if no remote
Go control signals were received. To avoid this automatic
to http://philips-tvconsumercare.kxondemand.com/ switch off, you can deactivate this switch off.
portal/en/ModelSelect In Help > User manual, press the colour
key  Keywords and look up Switch Off Timer.
Also, if the TV does not receive a TV signal nor a
TV Help on your tablet, smartphone or computer remote control command for 10 minutes, the TV
To carry out extended sequences of instructions more switches off automatically.
easily, you can download the TV Help in PDF format
to read on your smartphone, tablet or
computer. Alternatively, you can print the relevant 22.3
Help page from your computer.
To download the Help (user manual) go
Remote Control
to www.philips.com/TVsupport
TV does not respond to the remote control
• The TV requires some time to start up. During this
time, the TV does not respond to the remote control
22.2
or TV controls. This is normal behaviour.
Switch On • The batteries of the remote control might be empty.
Replace the batteries with new ones.
The TV does not switch on
• Disconnect the power cable from the power outlet.
Wait for one minute then reconnect it. Make sure that 22.4
the power cable is securely connected. Try switching
on again.
Channels
• Connect the TV to another wall mains socket and try
No digital channels found during the installation
switching on.
• Check if the TV was connected with an antenna or is
• Disconnect all connected devices from the TV and
using a provider signal. Check the cable connections.
try switching on.
• Check if the country where you install the TV, has
• If the standby light on TV is on, the TV might not

58
digital channels available. • If the TV finds one satellite but cannot find a second
• Check if you selected the correct DVB (Digital Video one, turn the dish a few degrees. Align the dish to get
Broadcast) system. Select DVB-T (terrestrial) when the strongest signal on the first satellite. Check the
you use an antenna or common antenna, select DVB- signal strength indicator of the first satellite on-
C (cable) if you use a TV cable service. screen.
• Redo the installation and check if you select the • Check if the settings are set to two satellites.
correct country and system. Changing the installation settings did not solve my
No analogue channels found during the installation problem
• Check if the TV was connected with an antenna.
All settings, satellites and channels are only stored at
Check the cable connections.
the end of the installation when you finish.
• Check if you selected the correct DVB (Digital Video
Broadcast) system. Select DVB-T (terrestrial) when All satellite channels are gone
you use an antenna or common antenna.
If you use a Unicable system, make sure you assigned
• Redo the installation and select Digital and
two unique user band numbers for both built-in
analogue channels during the installation.
tuners in the Unicable settings. It might be that
Some channels disappeared, cannot find all or some
another satellite receiver in your Unicable system is
previously installed channels using the same user band number.
• Check if you selected the correct Channel
list or Favourites list you normally use. Some satellite channels seem to have disappeared
• Some channels might be moved or even deleted by from the channel list
the broadcaster. In the normal channels list, try to
If some channels seem to be gone or displaced, the
search for the channel you're missing. If the channel is
broadcaster might have changed the transponder
still available, you can put it back in the favourites
location of these channels. To restore the channel
list.
positions in the channel list, you can try an update of
• A channel can be deleted from the channel
the channel package.
list during Automatic channel update. These
automatic updates are done overnight if the TV is on I cannot remove a satellite
standby.
Subscription packages do not allow removing a
Channels that do not exist anymore are deleted and
satellite. To remove the satellite, you have to do a
new channels will be added to the channel list.
complete installation again and select another
Exceptionally, a channel can be deleted because the
package.
TV could not find it while checking for its presence. It
might not broadcast at night. Sometimes the reception is poor
To avoid channels being deleted during • Check if the satellite dish is solidly mounted. Strong
the Automatic channel update because the TV winds can move the dish.
could not find them although these channels are still • Snow and rain can degrade the reception.
there, you can switch off Automatic channel update.
 (Home) > Settings > All Settings > Channels >
Antenna/cable installlation, Satellite 22.6
installtion* > Automatic channel update
* Satellite installtion is only for models which support
Picture
satellite functions.
No picture / distorted picture
DVB-T2 HEVC channel • Check if the TV is connected with an antenna or is
• See the technical specifications to make sure that using a provider signal. Check the cable connections.
your TV supports DVB-T2 HEVC in your country and • Check if the correct source/input is selected in the
reinstall DVB-T channel. sources menu. Press  Sources and select the
source/input you need.
• Check if the external device or source is properly
22.5 connected.
• Check if the reception is poor.
Satellite • Check if the picture is set to a minimal value.
Select Picture style and select a style and press OK.
The TV cannot find the satellites I want or the TV  (Home) > Settings > All
installs the same satellite twice settings > Picture > Picture style
Check if the correct number of satellites is set in • To check if the TV is broken, try to play a video clip.
settings at the start of the installation. You can set the Press  (Home) > Settings > Help > Check the TV.
TV to search for One, Two or 3/4 satellites. If the video clip stays black, call Philips. Wait until the
clip ends and select Contact info in the Help menu.
A dual head LNB cannot find a second satellite

59
Call the telephone number for your country.  (Home) > Settings > All settings > General
Sound but no picture settings > Location
• Change to other video sources and then change Picture does not fit the screen / Wrong or unstable
back to current source.
picture size / Picture position is incorrect
• Select Picture style and select a style and
• If the picture size - its aspect ratio - does not fit the
press OK.
screen, with black bars on the top and bottom or left
 (Home) > Settings > All
and right side of the screen, press  (Home) >
settings > Picture > Picture style
Settings > All settings > Picture > Picture Format >
• Restore picture style, select back to Picture style,
Fill screen.
then press  Restore style.
• If the picture size changes all the
• Reset all TV settings, go
time, press  (Home) > Settings > All settings >
to  (Home) > Settings > All settings > General
Picture > Picture Format > Fit to screen.
settings > Reinstall TV.
• If the position of the picture is incorrect on the
• Check the connections of the source/input devices.
screen, try to check the signal resolution and output
Poor reception type of the connected device,
If the TV picture is distorted or variable in quality, the press  (Home) > Settings > All settings >
input signal might be poor. A weak digital signal is Picture > Picture Format > Original.
seen as a picture that is breaking up in square blocks Computer picture is not stable
and freezes occasionally. Much sooner than a bad
Make sure that your PC uses the supported resolution
analogue signal, a bad digital signal will fall away.
and refresh rate.
• Check if the antenna cable is properly connected.
 (Home) > Settings > All settings > Picture >
• Large loudspeakers, unearthed audio devices, neon
lights, high buildings and other large objects can
influence reception quality when you are using an
antenna. Try to improve the reception by changing 22.7
the antenna direction or moving devices away from
the TV. Bad weather might deteriorate the reception. Sound
• Check if all connections, to and from your devices,
are properly connected. No sound or poor sound quality
• If reception on only one channel is poor, fine-tune • Check if the sound settings of the TV are OK, press
this channel with Analogue: manual installation. (Only the  volume or  mute key.
for analogue channels) • If you use a digital receiver (set-top box), check if
 (Home) > Settings > Install the volume on this receiver is not set to zero or mute.
Channels > Antenna/cable • Check if the TV - the audio signal - is properly
installlation > Analogue: manual installation connected with the Home Theatre System, if you use
• Check if the incoming digital signal is sufficiently such a system for the TV sound. Check if you
strong. While watching a digital channel, connected the HDMI cable to an HDMI1
press  OPTIONS and select Status and ARC connection on the Home Theatre System.
press OK. Check the Signal strenght and Signal • Make sure that the TV audio output is connected to
quality. the audio input on the Home Theatre System.
Poor picture from a device Sound should be heard from the HTS (Home Theatre
• Make sure that the device is connected properly. System) speakers.
Make sure that the device's output video setting is the Sound with loud noise
highest possible resolution if applicable.
• Restore picture style or change to another picture If you watch a video from a plugged in USB flash drive
style. or connected computer, the sound from your Home
Theatre System might be distorted. This noise is heard
Picture settings change after a while
when the audio or video file has DTS sound but the
Make sure that Location is set to Home . You can Home Theatre System has no DTS sound processing.
change and save settings in this mode. You can fix this by setting the Digital out format of
 (Home) > Settings > All settings > General the TV to Stereo.
settings > Location Press  (Home) > Settings > All
settings > Sound > Advanced > Digital out format
A banner appears
If an on screen promotion banner appears
occasionally or the Picture style automatically
switches back to Vivid at startup, the TV is in Shop
location. Set the TV to Home location for use at
home.

60
22.8 22.10

HDMI - UHD Wi-Fi and Internet

HDMI Wi-Fi network not found or distorted
• Note that HDCP (High-bandwidth Digital Content • Check if the firewalls in your network allow access
Protection) support can delay the time taken for a TV to the TV's wireless connection.
to display content from an HDMI device. • If the wireless network does not work properly in
• If the TV does not recognise the HDMI device and your home, try the wired network installation.
no picture is displayed, switch the source from one Internet does not work
device to another and back again. • If the connection to the router is OK, check the
• This is an Ultra HD TV. Some older devices - router connection to the Internet.
connected with HDMI - do not recognise an Ultra HD
The PC and Internet connection are slow
TV electronically and might not work correctly or
• Look in your wireless router's user manual for
show distorted picture or sound. To avoid the
information on indoor range, transfer rate and other
malfunctioning of such a device, you can set the
factors of signal quality.
signal quality to a level the device can handle. If the
• Use a high-speed (broadband) Internet connection
device is not using Ultra HD signals, you can switch
for your router.
off Ultra HD for this HDMI connection.
If the picture and sound of a device connected with DHCP
HDMI is distorted, check if a different HDMI Ultra • If the connection fails, you can check the DHCP
HD setting can solve this problem. In Help > User (Dynamic Host Configuration Protocol) setting of the
manual, press the colour key  Keywords and router. DHCP should be switched on.
look up HDMI Ultra HD.
• If there are intermittent sound disruptions, make
22.11
sure that output settings from the HDMI device are
correct. Wrong Menu Language
HDMI EasyLink does not work
• Check if your HDMI devices are HDMI-CEC Change the language back to your language.
compatible. EasyLink features only work with devices 1 - Press  Home , and press  (up) for once.
that are HDMI-CEC compatible. 2 - Press  (right) for twice, and press  (down) for
No volume icon shown once.
• When an HDMI-CEC audio device is connected and 3 - Press 8 times  (right), make sure the icon is ,
you use the TV Remote Control to adjust the volume and press OK.
level from the device, this behaviour is normal. 4 - Press 7 times  (down), and press  (right) 3
times, select your language and press OK.

22.9

USB
Photos, videos and music from a USB device do not
show
• Check if the USB storage device is set to Mass
Storage Class compliant, as described in the storage
device's documentation.
• Check if the USB storage device is compatible with
the TV.
• Check if the audio and picture file formats are
supported by the TV. For more information, in Help,
press the colour key  Keywords and look
up Multimedia.
Choppy playback of USB files
• The transfer performance of the USB storage device
may limit the data transfer rate to the TV which
causes poor playback.

61
23 ensure that the power voltage matches the value
printed on the back of the TV. Never connect the TV
Safety and Care to the power outlet if the voltage is different.

23.1

Safety Stability Hazards

A television set may fall, causing serious personal
Important injury or death. Many injuries, particularly to children,
can be avoided by taking simple precautions such as:
Read and understand all safety instructions before
• ALWAYS use cabinets or stands or mounting
you use the TV. If damage is caused by failure to
methods recommended by the manufacturer of the
follow instructions, the warranty does not apply.
television set.
• ALWAYS use furniture that can safely support the
television set.
Risk of Electric Shock or Fire • ALWAYS educate children about the dangers of
climbing on furniture to reach the television set or its
• Never expose the TV to rain or water. Never place controls.
liquid containers, such as vases, near the TV. • ALWAYS route cords and cables connected to your
If liquids are spilt on or into the TV, disconnect the TV television so they cannot be tripped over, pulled or
from the power outlet immediately. grabbed.
Contact Philips TV Consumer Care to have the TV • NEVER place a television set in an unstable location.
checked before use. • NEVER place the television set on tall furniture (for
• Never expose the TV, remote control or batteries to example, cupboards or bookcases) without anchoring
excessive heat. Never place them near burning both the furniture and the television set to a suitable
candles, naked flames or other heat sources, support.
including direct sunlight. • NEVER place the television set on cloth or other
• Never insert objects into the ventilation slots or other materials that may be located between the television
openings on the TV. set and supporting furniture.
• Never place heavy objects on the power cord. • NEVER place items that might tempt children to
• Avoid force coming onto power plugs. Loose power climb, such as toys and remote controls, on the top of
plugs can cause arcing or fire. Ensure that no strain is the television or furniture on which the television is
exerted on the power cord when you swivel the TV placed.
screen.
• To disconnect the TV from the mains power, the If the existing television set is going to be retained
power plug of the TV must be disconnected. When and relocated, the same considerations as above
disconnecting the power, always pull the power plug, should be applied.
never the cord. Ensure that you have full access to
the power plug, power cord and outlet socket at all
times. Risk of Swallowing Batteries
The remote control may contain coin-type batteries
which can easily be swallowed by small children.
Risk of Injury or Damage to the TV Keep these batteries out of reach of children at all
• Two people are required to lift and carry a TV that times.
weighs more than 25 kg or 55 lbs.
• If you mount the TV on a stand, only use the
supplied stand. Secure the stand to the TV tightly. Risk of Overheating
Place the TV on a flat, level surface that can support
the weight of the TV and the stand. Never install the TV in a confined space. Always leave
• When wall mounted, ensure that the wall mount can a space of at least 10 cm or 4 inches around the TV
safely bear the weight of the TV set. TP Vision bears for ventilation. Ensure curtains or other objects never
no responsibility for improper wall mounting that cover the ventilation slots on the TV.
results in accident, injury or damage.
• Parts of this product are made of glass. Handle with
care to avoid injury or damage.
Risk of damage to the TV !
Before you connect the TV to the power outlet,

62
Lightning Storms Clean
Disconnect the TV from the power outlet and antenna • Never touch, push, rub or strike the screen with any
before lightning storms. object.
During lightning storms, never touch any part of the • Unplug the TV before cleaning.
TV, power cord or antenna cable. • Clean the TV and frame with a soft damp cloth and
wipe gently. Never use substances such as alcohol,
chemicals or household cleaners on the TV.
• To avoid deformations and colour fading, wipe off
Risk of Hearing Damage water drops as quickly as possible.
Avoid using earphones or headphones at high • Avoid stationary images as much as possible.
volumes or for prolonged periods of time. Stationary images are images that remain onscreen
for extended periods of time. Stationary images
include onscreen menus, black bars, time displays,
etc. If you must use stationary images, reduce screen
Low Temperatures contrast and brightness to avoid screen damage.

If the TV is transported in temperatures below 5°C or

41°F, unpack the TV and wait until the TV temperature
reaches room temperature before connecting the TV
to the power outlet.

Humidity
In rare occasions, depending on temperature and
humidity, minor condensation can occur on the inside
of the TV glass front (on some models). To prevent
this, do not expose the TV to direct sunlight, heat or
extreme humidity. If condensation occurs, it will
disappear spontaneously while the TV is playing for a
few hours.
The condensation moisture will not harm the TV or
cause malfunction.

Radiation Exposure Statement

This equipment complies with CE radiation exposure
limits set forth for an uncontrolled environment. This
equipment should be installed and operated with
minimum distance 20cm between the radiator and
body.

The frequency, mode and the maximum transmitted

power in EU are listed below:
- 2400-2483.5MHz: < 20 dBm (EIRP)

23.2

Screen Care

63
24 CE compliance
Hereby, TP Vision Europe B.V. declares that this
Terms of Use television is in compliance with the essential
requirements and other relevant provisions of
Directives 2014/53/EU (RED), 2009/125/EC (Eco
2019 © TP Vision Europe B.V. All rights reserved.
Design) and 2011/65/EC (RoHS).
This product was brought to the market by TP Vision
Compliance with EMF
Europe B.V. or one of its affiliates, hereinafter referred
TP Vision manufactures and sells many products
to as TP Vision, which is the manufacturer of the
targeted at consumers which, like any electronic
product. TP Vision is the warrantor in relation to the
apparatus, in general have the ability to emit and
TV with which this booklet was packaged. Philips and
receive electromagnetic signals. One of TP Vision’s
the Philips Shield Emblem are registered trademarks
leading business principles is to take all necessary
of Koninklijke Philips N.V.
health and safety measures for our products, to
Specifications are subject to change without notice. comply with all applicable legal requirements and to
Trademarks are the property of Koninklijke Philips N.V stay well within the Electro Magnetic Field (EMF)
or their respective owners. TP Vision reserves the right standards applicable at the time of producing the
to change products at any time without being obliged products.
to adjust earlier supplies accordingly.
TP Vision is committed to developing, producing and
The written material packaged with the TV and the marketing products that cause no adverse health
manual stored in the memory of the TV or effects. TP Vision confirms that, as long as its products
downloaded from the Philips are handled properly for their intended use, they are
website www.philips.com/TVsupport are believed to safe to use according to scientific evidence available
be adequate for the intended use of the system. today. TP Vision plays an active role in the
development of international EMF and safety
The material in this manual is believed adequate for
standards, enabling TP Vision to anticipate further
the intended use of the system. If the product, or its
developments in standardisation for early integration
individual modules or procedures, are used for
in its products.
purposes other than those specified herein,
confirmation of their validity and suitability must be
obtained. TP Vision warrants that the material itself
does not infringe any United States patents. No
further warranty is expressed or implied. TP Vision
cannot be held responsible neither for any errors in
the content of this document nor for any problems as
a result of the content in this document. Errors
reported to Philips will be adapted and published on
the Philips support website as soon as possible.
Terms of warranty - Risk of injury, damage to TV or
void of warranty!
Never attempt to repair the TV yourself. Use the TV
and accessories only as intended by the
manufacturer. The caution sign printed on the back of
the TV indicates risk of electric shock. Never remove
the TV cover. Always contact Philips TV Customer
Care for service or repairs. Find the telephone number
in the printed documentation that came with the
TV. Or consult our
website www.philips.com/TVsupport and select
your country if needed. Any operation expressly
prohibited in this manual, or any adjustments and
assembly procedures not recommended or
authorised in this manual, shall void the warranty.
Pixel characteristics
This TV product has a high number of colour pixels.
Although it has effective pixels of 99.999% or more,
black dots or bright points of light (red, green or blue)
may appear constantly on the screen. This is a
structural property of the display (within common
industry standards) and is not a malfunction.

64
25 25.4

Copyrights DTS-HD (italics)

DTS
25.1
For DTS patents, see http://patents.dts.com.
HDMI Manufactured under license from DTS Licensing
Limited. DTS, the Symbol, DTS and the Symbol
The terms HDMI and HDMI High-Definition together, DTS-HD, and the DTS-HD logo are
Multimedia Interface, and the HDMI Logo are registered trademarks and/or trademarks of DTS, Inc.
trademarks or registered trademarks of HDMI in the United States and/or other countries. © DTS,
Licensing Administrator, Inc. in the United States and Inc. All Rights Reserved.
other countries.

25.5

Wi-Fi Alliance
25.2
Wi-Fi®, the Wi-Fi CERTIFIED logo, the Wi-Fi logo are
Dolby Audio registered trademarks of the Wi-Fi Alliance.

Dolby Audio
Dolby, Dolby Audio, and the double-D symbol are
trademarks of Dolby Laboratories. Manufactured
under license from Dolby Laboratories. Confidential
unpublished works. Copyright © 1992-2015 Dolby
Laboratories. All rights reserved.

25.6

Other Trademarks
All other registered and unregistered trademarks are
25.3
the property of their respective owners.
Dolby Vision and Dolby
Atmos
Dolby Vision and Dolby Atmos
Dolby, Dolby Atmos, Dolby Audio, Dolby Vision, and
the double-D symbol are trademarks of Dolby
Laboratories. Manufactured under license from Dolby
Laboratories. Confidential unpublished works.
Copyright © 1992-2018 Dolby Laboratories. All rights
reserved.

65
26 P1003.2/ISO 9945.2 Shell and Tools standard.
It offers functional improvements over sh for both
Open Source programming and interactive use.
In addition, most sh scripts can be run by Bash
26.1 without modification.
Source: http://www.gnu.org/software/bash/
Open Source Software
c-ares (1.10.0)
This television contains open source software. TP c-ares is a C library that performs DNS requests and
Vision Europe B.V. hereby offers to deliver, upon name resolves asynchronously.
request, a copy of the complete corresponding Source: http://c-ares.haxx.se/
source code for the copyrighted open source
software packages used in this product for which such coreutils (6.9)
offer is requested by the respective licences. The GNU Core Utilities are the basic file, shell and text
manipulation utilities of the GNU operating system.
This offer is valid up to three years after product
These are the core utilities which are expected to
purchase to anyone in receipt of this information.
exist on every operating system.
To obtain the source code, please write in English to .
Source: http://www.gnu.org/software/coreutils/
..
[email protected] e2fsprogs (2.12.2)
e2fsprogs provides the filesystem utilities for use with
the ext2 filesystem, it also supports the ext3 and ext4
26.2 filesystems.
This piece of software is made available under the
Open Source License terms and conditions of the e2fsprogs license, which
can be found below.
About Open Source License Source: http://e2fsprogs.sourceforge.net/

README for the source code of the parts of TP Vision Expat (2.01)
Netherlands B.V. TV software that fall under open xml paser; Expat is an XML parser library written in C.
source licenses. It is a stream-oriented parser in which an application
This is a document describing the distribution of the registers handlers for things the parser might find in
source code used on the TP Vision Netherlands B.V. the XML document (like start tags). An introductory
TV, which fall either under the GNU General Public article on using.
License (the GPL), or the GNU Lesser General Public This piece of software is made available under the
License (the LGPL), or any other open source license. terms and conditions of the Expat license, which can
Instructions to obtain copies of this software can be be found below.
found in the Directions For Use. Source: http://expat.sourceforge.net/

TP Vision Netherlands B.V. MAKES NO WARRANTIES DFB (4.2.31)

WHATSOEVER, EITHER EXPRESS OR IMPLIED, It is a software library for GNU/Linux/UNIX based
INCLUDING ANY WARRANTIES OF operating system with a small memory footprint that
MERCHANTABILITY OR FITNESS FOR A PARTICULAR provides graphics acceleration, input device handling
PURPOSE, REGARDING THIS SOFTWARE. TP Vision and abstraction layer, and integrated windowing
Netherlands B.V. offers no support for this software. system with support for translucent windows and
The preceding does not affect your warranties and multiple display layers on top of the Linux
statutory rights regarding any TP Vision Netherlands framebuffer without requiring any kernel
B.V. product(s) you purchased. It only applies to this modifications
source code made available to you. Source: http://sourceforge.net/projects/jointspace/fil
es/remote_applications_SDK/remote_spplications_S
DK_v1.3.1/DirectFB141_source_1.3.1.7z/download
Open Source
SAWMAN
bash (3.2.48) SaWMan, the Shared application and Window
Bash is the shell, or command language interpreter, Manager, is a new window manager module for use
that will appear in the GNU operating system. with DirectFB.
Bash is an sh-compatible shell that incorporates Source: http://www.directfb.org/index.php?path=Mai
useful features from the Korn shell (ksh) and C shell n%2FDownloads&page=1
(csh).
It is intended to conform to the IEEE POSIX findutils (4.2.31)

66
The GNU Find Utilities are the basic directory Source: http://www.gnu.org/software/inetutils/
searching utilities of the GNU operating system.
These programs are typically used in conjunction with iptables (1.4.15)
other programs to provide modular and powerful For Cross connection.
directory search and file locating capabilities to other Source: http://www.netfilter.org/projects/iptables/
commands.
Source: http://www.gnu.org/software/findutils/ iputils (s20101006)
The iputils package is set of small useful utilities for
Freetype (2.4.3) Linux networking. It was originally maintained by
FreeType is a software font engine that is designed to Alexey Kuznetsov.
be small, efficient, highly customizable, and portable Source: http://www.skbuff.net/iputils/
while capable of producing high-quality output
(glyph images). Libcurl (7.30.0)
Source: http://freetype.sourceforge.net HTTP client;libcurl is a free and easy-to-use client-
side URL transfer library, supporting FTP, FTPS, HTTP,
fuse (2.8.4) HTTPS, SCP, SFTP, TFTP, TELNET, DICT, LDAP,
Fuse is a simple interface for userspace programs to LDAPS, FILE, IMAP, SMTP, POP3 and RTSP. libcurl
export a virtual filesystem to the linux kernel. supports SSL certificates, HTTP POST, HTTP PUT, FTP
This piece of software is made available under the uploading, HTTP form based upload, proxies, cookies,
terms and conditions of the fuse license, which can user+password authentication (Basic, Digest, NTLM,
be found below. Negotiate, Kerberos4), file transfer resume, http proxy
Source: http://fuse.sourceforge.net/ tunneling and more!
This piece of software is made available under the
gawk (3.1.5) terms and conditions of the Libcurl license, which can
If you are like many computer users, you would be found below.
frequently like to make changes in various text files Source: http://curl.haxx.se/
wherever certain patterns appear, or extract data from
parts of certain lines while discarding the rest. libiconv (1.11.1)
To write a program to do this in a language such as C This library provides an iconv() implementation, for
or Pascal is a time-consuming inconvenience that use on systems which don't have one, or whose
may take many lines of code. implementation cannot convert from/to Unicode. .
The job is easy with awk, especially the GNU This piece of software is made available under the
implementation: gawk. terms and conditions of the libiconv license, which
Source: http://www.gnu.org/software/gawk/ can be found below.
Source: http://ftp.gnu.org/pub/gnu/libiconv
glibc (2.12.2)
Any Unix-like operating system needs a C library: the libmtp (0.3.6)
library which defines the “system calls” and other libmtp is an Initiator implementation of the Media
basic facilities such as open, malloc, printf, exit...The Transfer Protocol (MTP) in the form of a library
GNU C library is used as the C library in the GNU suitable primarily for POSIX compliant operating
system and most systems with the Linux kernel systems. We implement MTP Basic, the stuff
This piece of software is made available under the proposed for standardization.
terms and conditions of the glibc license, which can Source: http://libmtp.sourceforge.net/
be found below.
Source: http://www.gnu.org/software/libc/ libjpg (6b)
This library is used to perform JPEG decoding tasks.
grep (2.5.1a) This piece of software is made available under the
The grep command searches one or more input files terms and conditions of the libjpg license, which can
for lines containing a match to a specified pattern. By be found below.
default, grep prints the matching lines. Source: http://www.ijg.org/
Source: http://www.gnu.org/software/grep/
libusb
gzip (1.3.12) This is the home of libusb, a library that gives user
GNU Gzip is a popular data compression program level applications uniform access to USB devices
originally written by Jean-loup Gailly for the GNU across many different operating systems. libusb is an
project. Mark Adler wrote the decompression part. open source project licensed under the GNU Lesser
Source: http://www.gnu.org/software/gzip/ General Public License version 2.1.
Many participants in the libusb community have
inetutils (1.4.2) helped and continue to help with ideas,
Inetutils is a collection of common network programs. implementation, support and improvements for

67
libusb. ain_Page
This piece of software is made available under the
terms and conditions of the libusb license, which can mtd-utils
be found below. The aim of the system is to make it simple to provide
Source: a driver for new hardware, by providing a generic
http://libusb.wiki.sourceforge.net interface between the hardware drivers and the upper
http://www.libusb.org/ layers of the system. Hardware drivers need to know
nothing about the storage formats used, such as FTL,
libusb-compat FFS2, etc., but will only need to provide simple
Library to enable user space application programs to routines for read, write and erase. Presentation of the
communicate with USB devices. device's contents to the user in an appropriate form
This piece of software is made available under the will be handled by the upper layers of the system.
terms and conditions of the libusb-compat license, This piece of software is made available under the
which can be found below. terms and conditions of the mtd-utils license, which
Source: can be found below.
http://libusb.wiki.sourceforge.net/LibusbCompat0.1 Source: http://www.linux-
mtd.infradead.org/index.html
libpng (1.2.43)
libpng -THE reference library for reading, displaying, ncurses (5.7)
writing and examining png Image Network Graphics. The ncurses (new curses) library is a free software
This piece of software is made available under the emulation of curses in System V Release 4.0 (SVr4),
terms and conditions of the libpng license, which can and more. It uses terminfo format, supports pads and
be found below. color and multiple highlights and forms characters
Source: http://sourceforge.net/projects/libpng/files/ and function-key mapping, and has all the other
SVr4-curses enhancements over BSD curses. SVr4
Libxml2 (2.7.8) curses is better known today as X/Open Curses.
The "libxml2" library is used in AstroTV as a support Source: http://www.gnu.org/software/ncurses/
for the execution of NCL application. This library was
developed for the GNOME software suite and is net-tools (1.6)
available under a "MIT" license. The Net-tools?package is a collection of programs for
Source: http://www.xmlsoft.org controlling the network subsystem of the Linux kernel.
Source: http://www.linuxfromscratch.org/blfs/view/6.
Linux Kernel (3.1) 3/basicnet/net-tools.html
The Linux kernel is an operating system kernel used
by the Linux family of Unix-like operating systems. NTFS-3G Read/Write Driver (2010.5.22)
This piece of software is made available under the NTFS-3G is an open source cross-platform
terms and conditions of the Linux Kernel license, implementation of the Microsoft Windows NTFS file
which can be found below. system with read-write support. NTFS-3G often uses
Source: http://www.kernel.org the FUSE file system interface, so it can run
unmodified on many different operating systems. It is
Linux Fusion (8.7.0) runnable on Linux, FreeBSD, NetBSD, OpenSolaris,
Source: GNU BeOS, QNX, WinCE, Nucleus, VxWorks,
Haiku,MorphOS, and Mac OS X It is licensed under
liveMedia (2011.06.12) either the GNU General Public License or a
c++ runtime library for RTSP requirement proprietary license. It is a partial fork of ntfsprogs and
Source: www.live555.com is under active maintenance and development.
This piece of software is made available under the
lvm2 (2.02.89) terms and conditions of the NTFS-3G Read/Write
Userspace toolset that provide logical volume Driver license, which can be found below.
management facilities on linux. Source: http://www.tuxera.com
This piece of software is made available under the
terms and conditions of the lvm2 license, which can openssl (1.0.1j)
be found below. OpenSSL is an open source implementation of the
Source: ftp://sources.redhat.com/pub/lvm2/releases/ SSL and TLS protocols. The core library (written in the
C programming language) implements the basic
module-init-tools (3.12) cryptographic functions and provides various utility
Provides developer documentation for the utilities functions. Wrappers allowing the use of the OpenSSL
used by Linux systems to load and manage kernel library in a variety of computer languages are
modules (commonly referred to as "drivers"). available.
Source: https://modules.wiki.kernel.org/index.php/M Source: http://www.openssl.org/

68
procps (ps, top) (3.2.8) to run .
procps is the package that has a bunch of small This piece of software is made available under the
useful utilities that give information about processes terms and conditions of the u-Boot loader license,
using the /proc filesystem. which can be found below.
The package includes the programs ps, top, vmstat, w, Source: http://www.denx.de
kill, free, slabtop, and skill.
Source: http://procps.sourceforge.net/index.html udhcpc (0.9.8cvs20050303-3)
Source: http://udhcp.sourcearchive.com/downloads/
samba (3.0.37) 0.9.8cvs20050303-3/
Samba is the standard Windows interoperability suite
of programs for Linux and Unix. uDirectFB (1.5.3)
Source: http://www.samba.org/ Source: http://www.directfb.org

SaWMan (1.5.3) uriparser (0.7.7)

SaWMan, the Shared application and Window Uriparser is a strictly RFC 3986 compliant URI parsing
Manager, is a new window manager module for use and handling library written in C. uriparser is cross-
with DirectFB. platform, fast, supports Unicode and is licensed under
Source: http://www.directfb.org the New BSD license.
Source: http://uriparser.sourceforge.net/
sed (4.1.5)
sed (stream editor) isn't an interactive text editor. util-linux-ng (2.18)
Instead, it is used to filter text, i.e., it takes text input, Various system utilities.
performs some operation (or set of operations) on it, Source: http://userweb.kernel.org/~kzak/util-linux-
and outputs the modified text. ng/
sed is typically used for extracting part of a file using
pattern matching or substituting multiple occurrences wget (1.10.2)
of a string within a file. GNU Wget is a free software package for retrieving
Source: http://www.gnu.org/software/sed/ files using HTTP, HTTPS and FTP, the most widely-
used Internet protocols.
SQLite3 (2.12.2) It is a non-interactive commandline tool, so it may
SQLite is a in-process library that implements a self- easily be called from scripts,?cron?jobs, terminals
contained, serverless, zero-configuration, without X-Windows support, etc.
transactional SQL database engine. Source: http://ftp.gnu.org/gnu/wget/wget-1.10.2.tar.gz
This piece of software is made available under the
terms and conditions of the SQLite3 license, which wpa_supplicant v0.8(wext)/v2.3(cfg80211)
can be found below. wpa_supplicant is a WPA Supplicant for Linux, BSD,
Source: http://www.sqlite.org/ Mac OS X, and Windows with support for WPA and
WPA2 (IEEE 802.11i / RSN). It is suitable for both
SquashFS desktop/laptop computers and embedded systems.
SquashFS is a compressed read-only file system for Supplicant is the IEEE 802.1X/WPA component that is
Linux. SquashFS compresses files, inodes and used in the client stations. It implements key
directories, and supports block sizes up to 1 MB for negotiation with a WPA Authenticator and it controls
greater compression. SquashFS is also the name of the roaming and IEEE 802.11
free/open software, licensed under the GPL, for authentication/association of the wlan driver.
accessing SquashFS filesystems. Source: https://w1.fi/wpa_supplicant/
This piece of software is made available under the
terms and conditions of the SquashFS license, which xerces-c++ (3.1.1)
can be found below. Source: http://xerces.apache.org/
Source: http://squashfs.sourceforge.net/
zlib (6b)
tar (1.17) The 'zlib' compression library provides in-memory
GNU Tar provides the ability to create tar archives, as compression and decompression functions, including
well as various other kinds of manipulation. integrity checks of the uncompressed data.
For example, you can use Tar on previously created This piece of software is made available under the
archives to extract files, to store additional files, or to terms and conditions of the zlib license, which can be
update or list files which were already stored. found below.
Source: http://www.gnu.org/software/tar/ Source: http://www.zlib.net/

u-Boot (2011.12)
The uboot will load the linux kerenl to dram,and jump

69
27

Disclaimer regarding
services and/or
software offered by
third parties
Services and/or software offered by third parties may
be changed, suspended, or terminated without prior
notice. TP Vision does not bear any responsibility in
these sorts of situations.

70
71
 Index

A G
Advanced Picture Settings 35 Gamma 36
Advanced Sound Settings 38 General Settings 40
Antenna 11 Get Support 3
App Gallery 48
App lock 43 H
Audio Language 42 HbbTV 39
Audio Out Menu 38 HDMI 11
Auto Clock Mode 42 HDMI - CEC 40
HDMI ARC 12
B HDMI Sound System 38
Batteries 6 HDMI Ultra HD 40
HDR 36
C Headphone Connection 12
CAM PIN 44 Headphones 38
Channel List 23 Help Menu 3
Channel List Copy 22 Home Menu 34
Channel Options 22 Home or Shop 41
Channel, Channel Filter 24
Channel, Rename Channel 24 I
Channels 18 Identify TV 3
Child Lock 43 Input Resolution 56
Child Lock, Change Code 43 Install Channel - Antenna 18
Child Lock, Set Code 43 Install Channel - Cable 18
CI Card 14 Install Channel - Satellite 20
Clear dialogue 38
Clear Internet Memory 46 K
Clock 42 Keys on TV 8
Colour 35 L
Colour Enhancement 35
Location 41
Colour Settings 35
Lock Channel 24
Colour Temperature 35
Component - Y Pb Pr 11 M
Composite - CVBS 12 Menu Languages 42
Connect Device 11 Miracast 13
Consumer Care 3 Miracast Connection 13
Contact Info 3 Mouse Settings 40
Contrast 35 Multimedia 57
D N
Date 42 Netflix Settings 46
Daylight Saving 42 Network - Wired 45
Dialogue enhancement 43 Network - Wireless 45
Digital Audio Out - Optical 12 Network Settings 45
Digital Media Renderer - DMR 46 Network Settings Menu 46
Digital Out Delay 39
Digital Out Format 39 O
Digital Out Levelling 39 On-line User Manual 3
Digital Out Menu 39
Digital Out Offset 39
P
Dynamic Contrast 36 Parental Rating 43
Pause TV 31
E Philips Support 3
End of Use 54 Philips TV Remote App 14
Energy Saving 41 Photos, Videos and Music 32
Equalizer 38 Picture Clean, Noise Reduction 36
European Eco-label 54 Picture Contrast Menu 36
Picture Contrast Mode 36
F Picture Format 37
Favourite Channel, Channel Range 24 Picture Motion 37
Favourite Channel, Create 24 Picture Motion Style 37
Favourite Channel, Edit 24 Picture Style 34
Favourite Channels 25

72
Picture, Colour 35 Update Software - Local Updates 5
Picture, Contrast 35 Update Software - OAD 5
Picture, Sharpness 35 Update Software - USB 5
Power Cable 10 USB Flash Drive 15
Problems 58 USB Hard Drive 40
Product Fiche 54 USB Hard Drive - Format 15
USB Hard Drive - Install 15
Q USB Hard Drive Connection 15
Quick Picture Settings 37 USB Keyboard Settings 40
Quick Settings Menu 34 User Manual 3
R V
Reception 56 Video Contrast 36
Recordings 30 Video on Demand 49
Register TV 3 View Network Settings 46
Remote Control 6 Viewing Distance 9
Remote Control - IR Sensor 8
Remote Control and Batteries 6 W
Remote Control Key 6 Whitepoint Alignment 35
Rename or replace device icon 17 Wi-Fi 46
Repair 3
Reset Settings 42

S
Safety and Care 62
Satellite 11
Screen Off 41
Sharpness 35
Shop Setup 41
Sleep Timer 42
Smart TV 48
Software Version 5
Sound Menu 37
Sound Style 37
Sound, Auto Volume Levelling 38
Sound, Delta Volume 38
Source List 17
Standby Mode 10
Static IP 46
Subtitle Language 42
Switch Off Timer 41
Switch On with Wi-Fi 46
Switching On 10

T
Teletext 25
Text 25
Time 42
Time Zone 42
Troubleshooting 58
TV Display Resolution 56
TV Guide 27
TV Network Name 46
TV on Demand 49
TV Placement 38
TV Speaker 38

U
Ultra resolution 36
Universal Access 43
Universal Access, Audio Description 43
Universal Access, Audio Effects 43
Universal Access, Hearing Impaired 43
Universal Access, Mixed Volume 43
Universal Access, Speech 43
Unlock Channel 24
Update Software 5
Update Software - Internet 5

73
 74

Powered by TCPDF (www.tcpdf.org)