Series

LH
Type: solvent

Printing process: screen printing

Ink type: one-component

Finish: glossy

Materials: ABS, Cellulose acetate, Cellulose acetate butyrate, Coated paper, Lacquered surfaces, Mylar, Polycarbonate,
Polymethacrylate (PMMA), Polystyrene, rigid PVC, SAN, Self-adhesive PVC, Synthetic leather, treated Polyester

Main features:

Thermoplastic ink.

. Glossy appearance
. Moderate coverage
. Fast in drying
. Excellent solidity for outdoor applications
. Low odor
. Good flexibility
. Good thermoformability with the vacuum system
. Soluble during the print
. Possibility of use with the spray system using the relative OLVSP thinner.
. Excellent barrier to the migration of plasticizers contained on the supports to be printed.

Thermoplastic substances are sensitive to tension cracks, especially PS and PC, due to the solvents present inside the ink.
Pre-tests are absolutely essential for such printing applications.

Certifications: CLP/GHS (EC 1272/2008), Conflict minerals free, EN 71-3, Reach (EC 1907/2006), RoHS

The EN 71:3 Directive is valid for standard shades of one component inks, two component inks, Ink system and Process colors,
HD shades and for all not standard shades which do not contain metallic shades, metallic pastes or fluorescent pigments or
inks.
In order to clarify any doubt on not standard shades, it is always recommended to provide us a specific request.

Eco-sustainability (free of): Animal origin ingredients, Azo dyes, Bisphenol A (BPA), Formaldehyde, G-B Ester, Latex,
Melamine, Persistent organic pollutants, Phthalates (listed in RoHS directive)

Note: shades in the fluorescent color chart contain formaldehyde.

Note: all our inks are formulated with non carcinogenic aromatic naphthas as the benzene content is below than 0.1% by
weight.
IPA contamination are also possibile but always below the limit of 1000 ppm.

Outdoor resistance (years): 4

Suitable for outdoor application.

The pigments used have a solidity from 7 to 8 DIN.

In case of mixing with the transparent bases 70 TR or TP, or with the white 160 or 60 BN, the light fastness and atmospheric
agents decrease.

If you want to increase the outdoor solidity, it's recommended to add the 5-7% of UV adsorber to the ink.

Drying process: 10 minutes at room temperature

LH series dries physically by evaporation of solvents.

Series
LH
Drying times depend on various factors:
. thickness of printed ink layer (single print, multi-layer print).
. type and amount of thinners/retarders used
. type of oven
. drying temperature
. type of substrate on which the ink is deposited.

Ink dries physically by evaporation of solvents:

. 10-15 minutes at room temperature (depending on local conditions)

. 20-60 sec at 50°C in an air circulation oven.
(The test performed in our laboratory was carried out under the following conditions: 8 mt/min, 120.34 screen printing mesh,
medium thinner LH-DM at 15%, air circulation oven).

Mechanical and chemical solidity:

Alcohol
Gasoline (60-70 wipes with 1 Kg of weight)
Mechanical stress (Impacts)
Surface hardness (Abrasion) (hardness 3H)

Laboratory tests were performed after the complete drying of the printed film (48 hours in a muffle at 60°C)

Colours range: EXTRA - M, FLUORESCENTI, HD, INK SYSTEM, METALLIZZATI, QUADRICROMIA, TRASPARENTI

110 111 112 114 115 117 120 121 122 124

130 131 132 133 134 135 136 140 141 142

143 144 150 151 160 165 104 104 BIS 105 106

107 108 160 HD 165 HD 10 GL 11 GS 12 AR 21 RS 22 RC 25 MG

75 RE
27 VT 32 BL 40 VR 60 BN 65 NR 70 TR 75 RE 75 ME 76 RE
GLITTER

76 RE 77 RE 78 RE
76 ME 77 RE 77 ME 78 RE 78 ME 79-050 79-02 ME
GLITTER GLITTER GLITTER

79-NC 1080 1081 1082 1083 TP 80 81 81-00 82

82-00 83 84 85

Please refer to the Glossy ink LH series, Metallic, Fluorescent and Ink System ink color charts.
The Ink System are 12 colour shades for mixing of RAL, PMS and HKS colours

The metallic shades are available only by mixing the relative pastes with the Transparent Base LH 70 TR.

Gold paste 75 10-20%

Gold paste 76 10-20%

Gold paste 77 10-20%

Bronze paste 78 10-20%

Silver paste 79-050 10-15%

The metallic pastes composed with the relative transparent base LH 70 TR, due to their particular composition, can oxidize.
Series
LH
The pot-life of the compounded METALLIC PASTES is about 8 working hours.

The other metallic shades are ready for use.

The Display color chart contains extremely clear and transparent shades:

80 yellow
81 red
81-00 carmine red
82 blue
82-00 dark blue
83 purple
84 green
85 orange

In the Ink System color chart are present the shades.

1080 yellow, 1081 magenta, 1082 blue, 1083 black, TP paste (CMYK), necessary for making four-color prints.

In the range are also included the following shades :

160 HD Opaque white

165 HD Opaque black

170 AB Anti-gasoline transparent base

Auxiliaries and additives:

LH-DM medium thinner 15%
LH-DL slow thinner 15%
XF-DR fast thinner 15%
OLVSP thinner 50% for spray applications
Retarder paste 10% max
M 2000/S levelling agent 1,5%
Antisilicone/s 1,5%
Universal antifoam agent 1%
UV Adsorber 8%
Antistatic/s 1,5%
NPT matting powder 2% 6% max

Ink removal:
DACS solvent
Lavaggio telai solvent
Aprimaglia Spray

STORAGE:
Please keep the cans in a dark place, at temperature of 15-25°C.
If the recommended temperature is higher than the suggested one or the cans are not completely closed, the shelf life and the
qualities are drastically reduced.

CLASSIFICATION:
Before using this ink, consult the relevant safety data sheets available.
The safety data sheets provided comply with the REACH regulation (EC 1907/2006).
The hazard classification and related labelling are compliant with the CLP / GHS regulation (EC 1272/2008).

OTHER INFORMATION:
For more information on SERICOM ITALIA srl products, refer to the website www.sericom.it

NOTE:
Series
LH
Our technical consultancy activity, carried out orally, in writing or through tests or experiments, takes place on the basis of our
best knowledge.
However, the same must be considered as information without any binding value, also as regards any third party industrial
property rights.
This does not exempt the customer from performing his own checks on the products supplied by us in order to estimate the
suitability or otherwise of the procedures and for the purposes intended.
The application, use and transformation of the products take place outside our control possibilities and therefore fall under the
exclusive responsibility of the customer.