Scribd
Upload
4 views

Beam_Design_Eurocode2 2

The document outlines the design parameters and reinforcement detailing for beams, including moment and shear design specifications. It provides calculations for required and provided steel reinforcement, along with verification of moment and shear capacities. The properties of concrete and steel used in the design are also specified, indicating compliance with relevant standards.

Uploaded by

José Luis Obregón Castro
Copyright
© © All Rights Reserved
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
4 views

Beam_Design_Eurocode2 2

The document outlines the design parameters and reinforcement detailing for beams, including moment and shear design specifications. It provides calculations for required and provided steel reinforcement, along with verification of moment and shear capacities. The properties of concrete and steel used in the design are also specified, indicating compliance with relevant standards.

Uploaded by

José Luis Obregón Castro
Copyright
© © All Rights Reserved
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 5

Design of Beams (A

Moment Design
Beam Section c(c/d)'' 0.087
B 400 mm
H 500 mm Reinforcement Detailing
c 40 mm Ast 351.90 mm2
d 460.00 mm Astmin 307.88 mm2
Astmax 8000.00 mm2
Moment Design Parameters
Msd 60.17 KNm Asc 175.95 mm2
Mo 1199.0666667 KNm Ascmin 307.88 mm2
β 0.5 Ascmax 8000.00 mm2
μ 0.050
1-β 0.5 Steel Provided
ρM 0.053 Ast (required) 351.90
No. of bars 4
Ø 12
c' 0.033 Brittle Failure Ast (provided) 452.39 Okay

Reinforcement Detailing
β = 0.2 mid span ρmid 0.0025 Not Okay
β = 0.5 support ρmin 0.0031
READ LEFT SIDE IF
ρmax 0.0084
REINFORCEMENT IS
IN MID SPAN ρ'mid 0.0006

Shear Design Shear Verification


Shear Design Parameters Shear Verification Parameters
Vsd 214.25 KN ωsw 0.046 KN
k 1.659 KN Cot ϑcal 3.13
ρl 0.002 Cot ϑadopted 2.50
Ɣc 1.5 VRsd 271.43 KN
Vrd,1 67.116
tsd 0.091 Transverse r/f Design
α 90 1.570796 Critical region
αc 1 H 50.00 cm
υ 0.5 Lcr 50.00 cm
ϑmin 21.8 0.380482 Stirrups area: Øst >= 6 mm
ϑmax 45 0.785398 Øst 8.00 mm
tRcd,min 0.172 Pass Øl 12.00 mm
tRcd,max 0.250 smax 96.00 mm
tRsd 0.091
Øadopted 8
No. of legs 2L Provide:
Asw 100.53 mm 2
Critical region: Ø 8 / 100 mm
Cot ϑ 2.5 Central region: Ø 8 / 200 mm
smax 190 mm
sadopted 150 mm

Max shear is measured in the critical reggion, according to seismic regulations,


we have to reffer to the value of smax in the right
sign of Beams (Acc. To EUROCODE 2 - 1992 )

Properties of Concrete
fck 25.00 MPa
fcd 14.17 MPa
fcm 33.00 MPa
Pass fctm 2.56 MPa
Pass fctk 1.80 MPa
Ecm 31475.81 MPa

Fail Properties of Steel


Pass fyk 450 MPa
fyd 391.30 MPa
Es 210000 MPa
Asc (required) 307.88
No. of bars 2
Ø 12 Moment Verification
Asc (provided) 226.20More needed Moment Verification
β 0.5
ρM 0.068
ρsup 0.0025 Not Okay ξ 0.042
ρmin 0.0031 μ 0.066
READ RIGHT SIDE IF
ρmax 0.0090 Mo 1199.067
REINFORCEMENT IS
ρ'sup 0.0012 IN SUPPORT Mrd 79.01
Pass
ent Verification

Brittle Failure

Pass

You might also like