JOY MONDAL 22BCY10156

STEP1: LOGIN AS A ROOT USER AND SEARCH FOR VPC IN THE CONSOLE

STEP2: CLICK ON CREATE VPC

 JOY MONDAL 22BCY10156

STEP3: SELECT VPC ONLY> TYPE THE VPC NAME> IPv4CIDR-11.0.0.0/16

 JOY MONDAL 22BCY10156

STEP4: CLICK ON CREATE VPC

 JOY MONDAL 22BCY10156

STEP5: VPC CREATED

 JOY MONDAL 22BCY10156

STEP6: CLICK ON SUBNET>CREATE SUBNET

 JOY MONDAL 22BCY10156

STEP7: SELECT THE VPC THAT YOU HAVE CREATED EARLIER

 JOY MONDAL 22BCY10156

STEP8: SELECT ap-south-1a in the Availability Zone

 JOY MONDAL 22BCY10156

STEP9: ENTER IPv4 SUBNET CIDR BLOCK-11.0.1.0/24> CLICK ON ADD NEW SUBNET
 JOY MONDAL 22BCY10156

STEP9: ENTER THE NAME OF THE PRIVATE SUBNET> AVAILABILITY ZONE:ap-south-1b> IPv4

subnet CIDR Block-11.0.2.0/24> CLICK ON CREATE SUBNET

 JOY MONDAL 22BCY10156

STEP10: BOTH THE PUBLIC AND PRIVATE SUBNET IS CREATED

 JOY MONDAL 22BCY10156

STEP11: NOW CREATE AN INTERNET GATEWAY FOR PUBLIC SUBNET. CLICK ON INTERNET

GATEWAY FROM THE DASHBOARD> CLICK ON CREATE INTERNET GATEWAY

 JOY MONDAL 22BCY10156

STEP12: TYPE THE NAME OF THE GATEWAY

 JOY MONDAL 22BCY10156

STEP13: INTERNET GATEWAY IS CREATED

 JOY MONDAL 22BCY10156

STEP14: CLICK ON ATTACH TO VPC> SELECT THE VPC CREATED EARLIER> CLICK ON ATTACH
INTERNET GATEWAY
 JOY MONDAL 22BCY10156

STEP15: INTERNET GATEWAY IS ATTACHED TO THE VPC

 JOY MONDAL 22BCY10156

STEP16: NEXT CREATE TWO ROUTE TABLES (PRIVATE AND PUBLIC) FOR THE SUBNETS.

STEP17: TO CREATE A PUBLIC ROUTE TABLE: CLICK ON ROUTE TABLES>CREATE A ROUTE

TABLE> WRITE A SUITABLE NAME FOR THE ROUTE TABLE>CHOOSE THE VPC>CLICK ON CREATE
ROUTE TABLE
 JOY MONDAL 22BCY10156

STEP18: TO CREATE A PRIVATE ROUTE TABLE: CLICK ON ROUTE TABLES>CREATE A ROUTE

TABLE> WRITE A SUITABLE NAME FOR THE ROUTE TABLE>CHOOSE THE VPC>CLICK ON

CREATE ROUTE TABLE

 JOY MONDAL 22BCY10156

STEP19: BOTH THE PUBLIC AND PRIVATE ROUTE TABLES ARE CREATED AS SHOWN BELOW.

NOW WE NEED TO CONNECT BOTH THE ROUTE TABLES WITH THEIR CORRESPONDING

SUBNETS.
 JOY MONDAL 22BCY10156

STEP20: CLICK ON THE PUBLIC ROUTE TABLE>CLICK ON SUBNET ASSOCIATIONS

 JOY MONDAL 22BCY10156

STEP 21: CLICK ON EDIT SUBNET ASSOCIATIONS > CHOOSE PUBLIC SUBNET FROM THE

OPTIONS> CLICK ON SAVE ASSOCIATIONS

 JOY MONDAL 22BCY10156

STEP 21: SUBNET ASSOCIATION IS DONE. REPEAT THE SAME STEP FOR PRIVATE SUBNET
 JOY MONDAL 22BCY10156

STEP22: NEXT WE NEED TO CREATE THE ROUTE SO THAT INTERNET CAN BE ACCESSED

WITH THE HELP OF INTERNET GATEWAY THROUGH THESE ROUTE TABLES.

STEP23: GO TO PUBLIC ROUTE TABLE FROM THE AWS CONSOLE> CLICK ON ROUTES>CLICK
 JOY MONDAL 22BCY10156

STEP24: CLICK ON ADD ROUTE>SELECT THE IP-0.0.0.0/0>CHOOSE INTERNET GATEWAY>

SELECT THE INTERNET GATEWAY THAT YOU HAVE CREATED> CLICK ON SAVE CHANGES
JOY MONDAL 22BCY10156
 JOY MONDAL 22BCY10156

STEP25: WE NEED TO CREATE THE NAT GATEWAY FOR THE PRIVATE SUBNET SO THAT

RESOURCES PRESENT INSIDE THE PRIVATE SUBNET CAN ACCESS THE INTERNET WITH THE
 JOY MONDAL 22BCY10156

STEP27: GIVE A NAME TO THE NAT GATEWAY>CHOOSE THE PUBLIC SUBNET>ALLOCATE

ELASTIC IP> CLICK ON CREATE NAT GATEWAY.

JOY MONDAL 22BCY10156
 JOY MONDAL 22BCY10156

STEP28: NOW UPDATE THE PRIVATE ROUTE TABLE: CLICK ON THE ROUTE TABLES>CLICK ON

THE PRIVATE ROUTE TABLE>CLICK ON ROUTES>CLICK ON EDIT ROUTES

JOY MONDAL 22BCY10156
 JOY MONDAL 22BCY10156

STEP29: CLICK ON ADD ROUTE>SELECT IP ADDRESS

:0.0.0.0/0>SELECT NAT GATEWAY>CHOOSE THE NAT GATEWAY THAT YOU HAVE CREATED>

CLICK ON SAVE CHANGES.

 JOY MONDAL 22BCY10156

STEP30: PRIVATE SUBNET IS UPDATED WITH NAT GATEWAY

 JOY MONDAL 22BCY10156

STEP31: WHOLE NETWORK SET UP IS READY, NOW WE HAVE TO CREATE EC2 INSTANCES

FOR BOTH PUBLIC AND PRIVATE SUBNET. SEARCH FOR EC2>CLICK ON EC2
 JOY MONDAL 22BCY10156

STEP 32: CLICK ON LAUNCH INSTANCE

 JOY MONDAL 22BCY10156

STEP 33: GIVE A SUITABLE INSTANCE NAME>CHOOSE OS:UBUNTU

 JOY MONDAL 22BCY10156

STEP 34: CHOOSE THE DEFAULT ARCHITECTURE> FREE TIER INSTANCE TYPE
 JOY MONDAL 22BCY10156

STEP 35: CREATE KEY PAIR

 JOY MONDAL 22BCY10156

STEP 36: EDIT THE NETWORK SETTING>CHOOSE THE VPC CREATED EARLIER>SELECT THE

PUBLIC SUBNET> ENABLE THE AUTO-ASSIGN PUBLIC IP>CHOOSE CREATE SECURITY GROUP
 JOY MONDAL 22BCY10156

STEP 37: SECURITY GROUP RULE-1 IS DEFAULT> CLICK ON ADD SECURITY GROUP RULE
 JOY MONDAL 22BCY10156

STEP 38: CHOOSE ALL ICMP-IPV4> SOURCE:0.0.0.0/0

 JOY MONDAL 22BCY10156

STEP 39: CHOOSE DEFAULT CONFIGURE STORAGE: 8GB>CLICK ON LAUNCH INSTANCE

 JOY MONDAL 22BCY10156

STEP 40: PUBLIC INSTANCE CREATED

 JOY MONDAL 22BCY10156

STEP 41: CREATE EC2 INSTANCE FOR PRIVATE SUBNET WITH THE SAME STEPS

DISABLE AUTO-ASSIGN-PUBLIC IP.

STEP 42: ADD SECURITY GROUP RULE>CHOOSE ALL ICMP-IPV4>

SOURCE:11.0.1.0/24(PUBLIC SUBNET IP ADDRESS, COZ ONLY PUBLIC SUBNET CAN ACCESS

THE PRIVATE SUBNET)>KEEP DEFAULT STORAGE>CLICK ON LAUNCH INSTANCE

STEP 43: PRIVATE EC2 INSTANCE IS CREATED

 JOY MONDAL 22BCY10156

STEP 44: NOW CONNECT THE PUBLIC EC2 INSTANCE.CLICK ON THE PUBLIC INSTANCE>

CLICK ON CONNECT

STEP 45: CLICK ON SSH CLIENT> COPY THE EXAMPLE AND PASTE IN TERMINAL TO

CONNECT

STEP 46: OPEN THE TERMINAL IN YOUR LAPTOP AND TYPE THE FOLLOWING COMMAND>

NOW PASTE THE COMMAND HERE FROM THE SSH CLIENT

STEP 47: PUBLIC EC2 INSTANCE IS CONNECTED

STEP 48: NOW PING THE PUBLIC EC2 INSTANCE WITH THE HELP OF YOUR LOCAL

TERMINAL. GO TO INSTANCE AND COPY ITS IP ADDRESS AND TYPE THE FOLLOWING

COMMAND.

STEP 49: NOW NEXT FROM PUBLIC EC2 INSTANCE TERMINAL,

STEP 50: PING PRIVATE EC2 INSTANCE FROM THE LOCAL TERMINAL. COPY THE PRIVATE IP

STEP 51: TYPE THE FOLLOWING COMMAND TO CONNECT TO THE PRIVATE EC2 INSTANCE.
CONNECTION ESTABLISHED AS SHOWN BELOW.