Scribd
Upload
12 views

HIGH PRESSURE COMPRESSOR

The document provides safety warnings and maintenance instructions for equipment operation, emphasizing the importance of not unplugging the unit by the cord and replacing the fill assembly annually. It also details the procedure for replacing the fill hose to prevent dangerous situations. Proper maintenance is crucial to ensure safe operation and avoid potential hazards.

Uploaded by

ramaraoprathi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
12 views

HIGH PRESSURE COMPRESSOR

The document provides safety warnings and maintenance instructions for equipment operation, emphasizing the importance of not unplugging the unit by the cord and replacing the fill assembly annually. It also details the procedure for replacing the fill hose to prevent dangerous situations. Proper maintenance is crucial to ensure safe operation and avoid potential hazards.

Uploaded by

ramaraoprathi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 41

ANY USE DIF===-=io --_ -

OUENCES To--=_ -3

DO NOT UNPL�S -...


-=- -�--=-

CHANGE PURIPC- -
GHRAPHS 6.6 � :IJ:: ::: -=.= - _::-::- _r;=s ::;-=GULARLY, AS INDICATED IN PARA-

DRAIN THE CO : ::i �s:::- =- =-=s ___ ::-_ -..;::: :) CATcD IN PARAGRAPH 6. 7

UNPLUG THE Ga ::,tSSC


=- =:
- THERE IS A PRO3�
:; ..., ::- S -._= -- OPERATION
- PRE VIOUS TO C� :G
- AFTER OPERA �

& WARNING

NEVER UNPLUG TT·E U r


3 ::i..,� G ,E CORD. PU
LL THE PLUG AVOIDING BY
HAND. DO NOT US!:: =>r.E
s Of\ x::i:::;s_

11
1-----ii
------ 3

F:g. 15 Replacement of Filter Ca


rtridge

43
&
6.9. Replacement of fill assembly

CAUTION

THE FILL ASSEMBLY MUST BE REPLACED ONCE A YEAR OR BEFORE IF IT SHOWS


SIGNS OF DAMAGE. FAILURE TO DO SO MAY RESULT IN A DANGEROUS SITUATION
FOR THE OPERATOR.
THE MINIMUM CURVE RADIUS OF THE HOSE MUST BE BIGGER THAN 10 INCHES.
-�
Replace thEtf!II hose as follows:
1) Unscrew hose (No. 1) from fitting (No. 2)
2) Replace worn hose with new hose. Screw it to fitting No. 2
3) Check for air leaks using soapy water or Snoop.

D 0
0

Fig. 16 Replacement of Fill Assembly

44

You might also like