Scribd
Upload
23 views

KovarDataSheet

Kovar alloy is a material with specific physical and mechanical properties, including a density of 0.302 lb/cu in and a tensile strength of 75 ksi. Its chemical composition primarily consists of iron, nickel, and cobalt, with a melting point of 2640°F. The document also includes information on thermal expansion and provides contact details for purchasing Kovar online.

Uploaded by

Ananth Narayan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
23 views

KovarDataSheet

Kovar alloy is a material with specific physical and mechanical properties, including a density of 0.302 lb/cu in and a tensile strength of 75 ksi. Its chemical composition primarily consists of iron, nickel, and cobalt, with a melting point of 2640°F. The document also includes information on thermal expansion and provides contact details for purchasing Kovar online.

Uploaded by

Ananth Narayan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Kovar Alloy Properties

(ASTM F-15, NILO K, Pernifer 2918, Rodar, and Dilvar P1)

Kovar Alloy Physical Properties


Density lb/cu in 0.302
Specific Gravity 8.36
Curie Temp °F 815
°C 435
Melting Point °F 2640
°C 1449
Electrical Resistivity Micro-ohm-cm 40
Micro-ohm-cm 294
Thermal Conductivity W/cm °C 0.17
BTU-in/sq. ft-hr- 120
Specific Heat Cal/g- °C 0.11
BTU/lbm- °F 0.11
ppm/°F
Thermal Expansion 2.9
(75°F to 842°F)
ppm/°C
5.3
(25°C to 450°F)

Kovar Alloy Mechanical Properties


Tensile Strength ksi 75
MPa 518
Yield Strength ksi 40
MPa 276
Elongation % in 2 in. 30
Typical Hardness Ann. Rockwell HRB 80
Modulus of Elasticity Mpsi 30
kMPa 207

Kovar Alloy Chemistry


maximum % unless noted
Iron Bal
Nominal Nickel 29
Nominal Cobalt 17
Carbon 0.02
Silicon 0.20
Sulfur --
Chromium 0.20
Kovar Alloy Linear Coefficient of Thermal Expansion
Degree C Degree C
30-100 -- 30-450 5.1 - 5.5
30-150 -- 30-475 --
30-200 5.5 30-500 6.2
30-250 -- 30-525 --
30-300 5.1 30-550 --
30-325 -- 30-600 7.9
30-350 -- 30-700 9.3
30-375 -- 30-800 10.4
30-400 4.6 - 5.2 30-900 11.5
30-425 -- 30-1000 --

Disclaimer: All information is presented in good faith based on manufacturer supplied details.
Professional Plastics assumes no liability for the accuracy of this information or the suitability of any
material for a particular application. It is the responsibility of the customer to assess the suitability of
any material for their application.

Kovar is available online at:


http://www.professionalplastics.com/KOVAR

Call Professional Plastics at (888) 995-7767


E-Mail: [email protected]
Order Online at www.professionalplastics.com

Asia Customers Call + 65-6266-6193 - E-Mail: [email protected]

You might also like