Release Note: RN006 Validity: NA

th
Date: January 08 2018 Distribution: Internal External

Product: CS Imaging 1.19.0 Writer: Raphael Medus

Document Reference #: RN006- CS Imaging-20180108 Contact: Michel Faure / Marc Laurentin/ Sandrine Perennou

CS Imaging Suite 1.19.0

This release of CS Imaging Software is distributed as CS Imaging Suite 1.19.0 DVD.

CS Imaging Suite 1.19.0 replaces CS Imaging Suite 1.18.0.

Drivers DVD associated with CS Imaging Suite 1.19.0 is DVD Drivers 1.18.0

Note: Both CS Imaging and Trophy Imaging (version for Japan only) are available on infotec website. (Menu
“Imaging software” – CS Imaging V7 - tab “Download”)

This release note covers the following points:

- New features
- Fixed bugs
- Component versions
- Compatibility matrix
- Release history

 CS Imaging Suite DVD

 New Features
 CS Imaging Suite DVD is now available with two branding Carestream Dental and Carestream Health.
Please find the CAT number below:
 CS Dental: cat# 5314307
 CS Health: cat# 6850457

 CS 3D Imaging 3.8.7
o Fixed Bugs
 Incorrect oblique cross section orientation: B/L orientation remains unchanged while a flip is
observed when browsing the oblique cross section. This problem occurs only if the volume is
reformatted with the version 3.8.6.
 Components’ versions - Note: the versions colored in red are new regarding previous CS Imaging Suite
Disk Imaging Window 7.0.3.7
Products
CSI Suite CS Imaging Patient Browser 7.0.23.0
v.1.19.0 CS 3D Imaging Suite 3.8.7.0
CS Restore 1.7.8.2
CS Model 1.6.1.0
CSDM Lite 4.2.20.0
Monitor 1.1.13.0
CS Film Composer 3.6.9.1
CS Mesh Converter 1.1.1.0
Ceph Tracing 1.0.28.0
CAD Manager 1.0.15
Mesh Viewer 1.0.2.1
RecBase 2 1.0.0.5
Add-ons DISDemoImageDatabase 1.5
TaskQueue DataBaseCleaner 1.0.0.0
DicomTools 1.3.3
CSDM Lite Stopper 1.0.0
DICOM Printer Driver 2.0.0.17
DICOM Printer Driver 64 bits 2.0.0.18
DotNet2.0 2.0.50727.42
CS Link 5.2.0.8-A
VDDS media Interface 1.11.0.2
DPMS integration
Disk 2/2 RVG sensors RVG 4.6.11.0
Drivers Computed radiography CR 1.3.42
v.1.18.0 Extra-oral equipment CS 8000 E 5.0.2.29-I
CS 9000 5.4.5.7
CSDIT drivers 2.1.1.1
DotNet2.0 2.0.50727.42
CSDM Lite Stopper 1.0.0
Miscellaneous
TaskQueue DataBaseCleaner 1.0.0.0
DicomTools 1.3.3
Not included in the Drivers DVD (direct download available on Infotec website)
CS 8000 PCI 4.0.1.12-C
CS 8100 2D 0.2.24.0
CS 8100 3D 1.1.10.0
CS 8100SC 0.2.215.0
Extra-oral
CS 8100SC 3D 1.0.19.0
CS 9300 2.4.4.2-B

Drivers CS 9300 Select 1.1.6.0-C

CS 9500 5.0.7.0-A
CS 3000 0.2.0.4
CS Solutions CS 3500 2.1.6.30
CS 3600 2.1.6.30
Camera STV 1.3.61.0
Intra oral cameras CS1x00 Light
3.1.39.0
Edition Wizard
CS 7400 2.6.1.1
Service pack Digital plate systems Digital Plates system CS 7200 1.0.1.56
CS 7600 1.0.9.1
Software CS 3D Imaging Suite (32 bits) 3.5.18.0
 Compatibility matrix
This section specifies the minimum Operating System (OS) requirements for CS Imaging software and associated components delivered with the CS Imaging Suite 1.19.0. It is mandatory to
check that the OS configuration is compatible with the OS requirements. If necessary, you must update the OS.
(When applicable: WIP=Work In Progress)

XP XP Vista Vista Win7 Win7 Win8 Win 8.1 Win 10 Server Server Server 2008 R2
Application 64 bit 64 bit
32 bit 64 bit 32 bit 64 bit 32 bit 64 bit 64 bit 2003 2008 64bit

CS Imaging version 7 N N N N Y Y Y Y Y N N Y

CS 3D Imaging N N N N N Y Y Y Y N N N
/ Film Composer
Film composer N N Y N Y Y Y Y Y N N N

CS Restore N N N N Y Y Y Y Y N N N

CS Model N N N N Y Y Y Y Y N N N

CS Acquisition (1) N N Y N Y Y Y Y Y N N N

Trophy DICOM N N Y N Y Y Y Y Y N N N

RVG 5100 / 6100 / 6500 N N N N Y Y Y Y Y N N N

RVG 5200 / 6200 / 142/RVG Connect N N N N N Y Y Y Y N N N

CS 8000 Family PCI N N Y N Y N N N N N N N

CS 8000 Family Ethernet N N N N Y Y Y Y Y N N N

CS 8100 Pan/3D/SC N N N N N Y Y Y Y N N N

CS 9000 Pan/Ceph/3D N N Y N Y Y Y Y Y N N N

CS 9300 Pan/Ceph/3D N N N N Y Y Y Y Y N N N

CS 9300 Select Pan/Ceph/3D N N N N Y Y Y Y Y N N N

9500 3D N N Y N Y Y N N N N N N

STV/1000 Camera N N Y N Y N N N N N N N

OEM Camera N N Y N Y N N N N N N N

CS 1200/1500/1600 Camera N N Y N Y Y Y Y Y N N N

CS 3500 3D IO scanner N N N N N Y Y Y Y N N N

CS 3600 3D IO scanner N N N N N Y Y Y Y N N N

CS 3000 Milling N N N N N Y Y Y Y N N N

CS 7400 N N Y N Y Y N N Y N N N

CS 7600 N N Y N Y Y Y Y Y N N N

CS 7200 N N N N Y Y Y Y Y N N N
RELEASE HISTORY

CS IMAGING 1.18.0 | JULY 2017

This release of CS Imaging Software is distributed as CS Imaging Suite 1.18.0 DVD and includes the following points:

- New features
- Drivers improvements
- Bug fixes

CS IMAGING SUITE DVD

 CS Imaging 7.0.3.4

Fixed Bugs

- Ceph Tracing Unknown error occurs with cephtracing2.m when trying to trace CS 8100SC images
- Error message appears when importing multiple images from imaging software
- Error pop-up appears when you export an image to a folder having a special character (Japanese character
for example)
- Images are overwritten when file extension is upper case (Ex: R1.RVG instead of R1.rvg).
- Save pop-up doesn't appear when drag and drop panoramic image to the dental arch in Imaging software.

New Features

- CS Adapt is now available for CS 7200 and CS 7600

- Virtual Ceph from CS 3D Imaging are supported in CS Imaging
- It is not possible anymore to create two patients with same name, first name and birth date.

 CS 3D Imaging 3.8.6

Fixed Bugs

- Unable to associate an implant with a crown using a PDIP technical license.

- 3D Review crashes when switching analysis.
- Incorrect Patient Orientation DICOM tag value in images converted by DICOMConvertToFP.

New Features

- CS 3D Imaging version 32 bits (3.5.18.0) is now available in Infotec website for download (not in the CS
Imaging Suite 1.18 DVD).
- Airways Analyses.

1
  Airways segmentation with a minimum of 2 mouse clicks

 Virtual Cephalometric generation.

© Carestream Dental, 2017 2

  Full sagital
 ½ left sagital
 ½ right sagital
 Full axial
 Full coronal

 New implant placement method.

 Crown – Implant association.

© Carestream Dental, 2017 3

  Fast loading of the 3D volume: Makes the volume available and start working sooner.

© Carestream Dental, 2017 4

 CS IMAGING 1.17.0 | JANUARY 2017

This release of CS Imaging Software is distributed as CS Imaging Suite 1.17.0 DVD and includes the following points:

- New features
- Drivers improvements
- Bug fixes
-

CS IMAGING SUITE DVD

 CS Imaging 7.0.2.8:

Fixed Bugs

 Option "save context on exit" crash with ceph images

 Incorrect display of 7600 images captures in a FMS format: some images turned 90° horizontally and
rotation tool is disabled
 Ceph images have curved edges and effect is more apparent by using Tconvert (For Japan third party
image only)
 Crash when closing DIS and both a PANO and a RVG image are still displayed
 Cephalometric Auto-Tracing: angle displayed is the opposite one

New Features:

 Cephalometric automatic tracing tool: add the possibility to perform a -/+ 90°

Note: For CS 7200 & CS 7600 products:

Do not use the new CS Imaging 7 version 1.17.0 with CR's Drivers equal or prior to versions :
 CS 7200 : 1.0.0.41 RevA5
 CS 7600 : 1.0.8.0 R3
Update on CS 7200 - CS 7600 Product News and Service Bulletin will be published with CS 7200 & CS
7600 new drivers release.

 CS 3D Viewer 3.7.1:

Fixed Bugs

 Carestream logo disappears when printing implant report

 Buccolingual anatomical terms are used on reformatted volumes from competition
 "Not set" is not displayed when patient's sex is empty
 Warning user when different patients are exported to the same media

New Features

 Use Carestream or Trophy logo on all Film Composer templates

© Carestream Dental, 2017 5

  Center implant list vertically within its container on Implant Report page 1
 Provide Implant Planning Report templates on black background
 Deploy DLL managing CSOI interface with application installer (For US)
 Log model retrieval strategy and DLL version handshake

DRIVERS DVD 1.17.0

 CS 9300 Premium/Select drivers are delivered in a separate DVD

 Driver CS 1200/1600 :
o Fixed bug : Win10 OS cannot be detected by Installation Wizard

Note: For CS 7200 & CS 7600 products:

Do not use the new CS Imaging 7 version 1.17.0 with CR's Drivers equal or prior to versions :
o CS 7200 : 1.0.0.41 RevA5
o CS 7600 : 1.0.8.0 R3

CS IMAGING 1.16.0 | JUNE 2016

This release of CS Imaging Software is distributed as CS Imaging Suite 1.16.0 DVD and includes the following points:

- New features
- Drivers improvements
- Bug fixes
-
 Patient browser update & new features :
 A large image preview
 Applicable to Mesh objects
 Exporting 3D volume enhancements,
 Intraoral scanner 2D image management,

© Carestream Dental, 2017 6

  New pano bitewing display image management,
 UDI conformance, and
 A new demo toolbar,

CS IMAGING SUITE DVD

 The Patient Browser now integrates a large preview of images contained in the integrated image gallery, including a Carousel view,
that makes it easier to find an image—including display of CAD/CAM images (2D and Mesh objects).

Display the image gallery with a large preview

CAD/CAM
images can be
rotated

or display in a
Carousel view

Quickly review the image gallery

and find the image you need by
navigating through your left/right keyboard controls

It is also possible to export CAD/CAM scanned objects from the Patient Browser
(through the “Save as” function) and select the export file as STL, PLY, or the Native file
format.
Users can also select multiple images of whatever type (2D, 3D, CAD/CAM)
through CONTROL+CLICK and export them into the same folder.
Now, the Patient Browser Preferences allows users to choose and specify the
default application for opening a CAD/CAM, CS Restore, or CS Model image. In addition,
the feature adds security when deleting processes by making it an optional feature that can
be deactivated (by default).

© Carestream Dental, 2017 7

  CS Imaging Window 7.0.1.10:

Like the Patient Browser, the Patient History also includes:

 Enhanced CAD/CAM support, with a large preview of the

Mesh object,
 Thumbnail display of the related 2D images which can be
opened in the Imaging Window,
 Export capabilities of one or more images of whatever type
(2D, 3D, CAD/CAM) through CONTROL+CLICK
 The ability to export them into the same folder.

The Imaging Window also supports CS 8100 / CS 8100 3D bitewing images, which can be inserted into a dedicated template
“PanoBitewing” from which it is possible to reposition the bitewings by panning those (one at a time or both images
simultaneously) so as to only display the meaningful elements as per a bitewing image.

Reposition the
bitewing
images
simultaneously
or one by one

© Carestream Dental, 2017 8

 As for US FDA needs, the About window now also carries a Unique Device Identifier (UDI) that specifically identifies the software
version.

Finally, the Demo toolbar is an option installed for tradeshow purposes that now includes the CS 8100 product range.

The Demo toolbar is not available in the list during the CS imaging suite installation.
However, you can install it manually from the DVD in the folder “Support\Tools”

CS 3D VIEWER 3.6.2.0 Only 64 bits OS architecture supported

New features:
- Improved tissue identification
- Implant planning report
- Unique Device Identifier (UDI)

Improvements:
- Select corresponding item in the object list when picking an object in a 2D view
- Warn user of mix-up when different patients are exported to the same media
- Use US letter templates by default for USA, Canada and Mexico
- Preserve transversal slice measurement when centering on an object
- Update US print templates (including single view, 4 views and curved)
- Update English Online help
- Prevent application from crashing when loading very large volumes
- Use the top of the implant as the reference point when replacing an implant

Fixed Bugs:
- 3D rendering of low dose acquisition is not always good
- Bad 3D view: amalgam algorithm error
- Bad 3D rendering for CS 8100 3D on 5x5 acquisitions
- Custom thickness for panoramic view does not apply when the thickness for other views is set to native resolution

Note: If you install this 3D suite version on a 32 bits OS, it will uninstall the previous 32 bits version and not installed the 3D suite 64
bits

 Automatic tracing module 1.0.25.0:

Fixed bugs:

CSI crash during automatic tracing calculation on CS 8100 SC

 Film Composer 3.6.7.0:

Fixed bugs:
- Header cannot be saved when creating a frame near to edge of header
- FilmComposer version 64 bit is not blacklisted on OS version 32 bit
- Film Composer error when print to PACS
- Implant report templates cannot be edited
 RVG Driver 4.9.11.0
- Support RVG 142

This new RVG driver doesn’t support RVG 5 USB , RVG 5000 and RVG 6000 anymore

CS IMAGING 1.15.2 | APRIL 2016

CS IMAGING PATIENT BROWSER 7.0.19.3:

© Carestream Dental, 2017 9

 Fixed bugs
o For the first installation of CSI7 meta on a Dutch OS, the default language is English

IMAGING WINDOW 7.0.0.23:

o Add a new button "Convert to" in the Patient history. With this button, Dicom files (3DIO, Restore, Model) are
exported and converted in STL files.
Now "Send to" button exports 3DIO, Restore or Model by keeping the Dicom format.

Fixed bugs
o IPET is considered as a virus, then blocked and deleted by AntiVirus

CS RESTORE 1.7.8.2:
o Fixed bugs :
o The margin line drawn in the acquisition software 3600 is not shown in the CS Restore

© Carestream Dental, 2017 10

 CS IMAGING 1.15.1 | MARCH 2016

CS IMAGING SUITE DVD

NEW - CS IM AGING PATIENT B ROWSER 7.0.18:

Patient management Extra-oral acquisition toolbar

Software information

Search engine Patient name

Patient card

Image management tools

Patient list Patient History

Patient History tools Dental Arch filter

New Patient Browser replaces the previous Patient File of Dental Imaging Software (DIS).

It allows user to search for any patient quickly by using the patient search engine.
User can now see all of a patient’s images in the integrated image gallery.
User can launch the extra-oral image acquisition interface directly.
User can even manage image files for export/import/printing, as well as drag & drop images for export.

© Carestream Dental, 2017 11

 NEW- IMAGING WINDOW 7.0.0:
 New intuitive icons
 Stylish black workspace
 New Dental Arch to locate images

The Imaging Window of CS Imaging is directly issued from Carestream’s Dental Imaging Software (DIS). It ensures to the user a smooth
transition from Carestream’s Dental Imaging Software (DIS) to CS Imaging version 7.

New intuitive icons now share the same icon design with all other CS software solutions.

These new icons simplify the transition by maintaining the same icon location as in DIS.

The new stylish black radiographic background enhances the user’s diagnostic experience by highlighting the images in
front of a black background. It intensifies the details of the images. Details of the images can furthermore be highlighted
by a large choice of filters.

With CS Imaging, users can manage and analyze a vast array of digital images while using the same workflow or tools
as in DIS.

All of these features minimize the amount of user disruption when transitioning from DIS to CS Imaging version 7.

FILM COMPOSER VERSION 3.6.4:

New features

Template Header Edition Tools

© Carestream Dental, 2017 12

 o Margin management in Templates (See Screenshot below)

CS IMAGING AND CS ACQUISITION COMPATIBILITY

When CS imaging version 7 is used in association with CS Acquisition, CS Acquisition must be upgraded in
version 1.0.30 minimum

© Carestream Dental, 2017 13

 DRIVERS DVD 1.15.1

CS 8000 ETHERNET DRIVER 5.0.2.29-I :

New features
o New German DIN standard support in the service tools
o Window 10 compatibility

CS 9000 DRIVER 5.4.5.4-A:

New features
o New German DIN standard support in the service tools
o Windows 10 compatibility
o QAT artifact checking during QAT 3D control in service tools
o Possibility to restore the old Task Queue rendering (KDIS version). This allows to not changing the
preferences of the customer when the driver is updated. In order to get the old rendering, you have to
open the Registry Editor of the acquisition computer and then create a DWORD “filter” in
HKLM/SOFTWARE/Classes/Trophy/PANO and set the value to 4
o CS Adapt is supported by the TWAIN driver
o It is possible to modify the dose factor (For panoramic modality only) of the unit from 0.7 to 1.3 in the
technical acquisition menu (see screen shoot below) This factor must be modifying regarding a Kerma
surface measurement.

Fixed bugs
o Panoramic acquisitions without X-ray stop during acquisition without error
o Increase the size of log files from 1MB to 5MB
o QAT test result failed even if all test passed

© Carestream Dental, 2017 14

 CS 9300 DRIVER 2.4.4.0-B / CS 9300S DRIVER 1.1.6.0-B:

New features
o Add a dose factor value in the technician menu for kerma surface measurement (idem as shown in CS
9000 section)

Fixed bugs
o 9300 driver very slow to load when launching acquisition GUI
o Line pair reference in acceptance/constancy test for ceph should be reduced back to 2.5 because of
QS Guideline regulatory
o QAT test result failed even if all test passed

CS 1200/1500/1600 CAMERA DRIVER 3.1.31.0:

Fixed bugs
o Images displayed in wrong order with DEXIS using Twain driver

CS 8100 FAMILY:

The CS 8100/8100 3D/8100SC drivers are not included in the DVD Drivers. Each driver will be included in the product
packaging.

Fixed bugs

© Carestream Dental, 2017 15

 DIS 1.14.0 | NOVEMBER 2015 |

New features

New 3D Viewer version 3.5.18:

o Windows 10 Support
o Custom rendering presets (Japan only)
o Default thickness for 2D views
o Add new options to the list of supported slice thickness with Volume convertor
o Display of the patient sex and date of birth

Fixed bugs

RVG driver version 4.6.9.0-C:

o Bug fix: USB 3 instability

o Windows 10 support

o RVG Connect for CS 6200

CS 9300 driver 2.4.3.0-N / CS 9300S driver 1.1.5.0-N:

o New DIN standard support in the service tools
o Windows Seven 32 bits compatibility
o Improvement on CS 9300 FOV 5X5 reconstruction algorithm
o QAT artifact checking during QAT 3D control in service tools

CS 1200/1500/1600 camera driver 31.1.29:

o Windows 10 support
o Fixed FMS out of order issue by update plug-in software
CS 8000Ethernet driver 5.0.2.29-B :
o Driver now available on DVD Drivers
CS 8100 Family:

o The CS 8100/8100 3D/8100SC drivers are not included in the DVD Drivers. Each driver will be
included in the product packaging.

© Carestream Dental, 2017 16

 DIS 1.13.0 | SEPTEMBER 2015 |

New features

o New 3D Viewer version 3.5.18

o Windows 10 Support

o Custom rendering presets for Yoshida (Japan only)

o Default thickness for 2D views

o Add new options to the list of supported slice thickness (VolumeConvertor)

Fixed bugs

NA

© Carestream Dental, 2017 17

 DIS 1.12.0 | AUGUST 2015 |

New features

o CS Model : “CS Model 1.5.1”.

o CS Restore : New Chair side package

Note 1: If you upgrade CS 3000 Software to latest version (0.2.0.4), you must install this new CS Restore release
1.6.6-B. It is the only one for now compatible with the CS 3000 Software 0.2.0.4.

o Mesh Viewer

o DIS

Customers who have upgraded their 8000 PCI to 8000 Ethernet with the PCI converter box have now the possibility to
choose between the 8000 PCI and the 8000 Ethernet processing’s.

This choice has to be made in the DIS Preferences by activating or deactivating the new option:

Launch of the Mesh Viewer for reviewing CS 3500 implant scans

The TWConf.txt file displays now more information about the OS used: 32 or 64 bits.

Fixed bugs

CS 3D Imaging

- Reversed orientation of arch view for CS 9300 5X5 volumes.

- Interslice distance in CS Film Composer is different than the one specified by the user in 3D Viewer slicing
tool.
- Transversal view is set at minimum zoom when creating a new arch.
- The zoom and pan is not correctly restored when manipulating the cutplanes in custom tab.
- The region of interest of the oblique axial view is not preserved in slicing tool.
- Online Help is empty when opened with Firefox from version 35.0

© Carestream Dental, 2017 18

 DIS

- The “Flip” button is no longer present on the toolbar for RVG, CRIO and CRPano images.
- Sometimes, an angle calculated during the ceph auto tracings is the opposite one.
- After having modified a patient name, the name is not modified on the radiological log.
- Optimization of the CS Adapt presets loading time
- In the case of a first DIS installation, the CS Adapt information message popup is not displayed after a first
acquisition.
- Extra-oral images are set with teeth numbers when inserted sometimes in a FMS.
- Ceph images saved as “new image” or acquired in DIS after launching a first time the Report are not listed in
the “List” tab of the patient history.
- Delete an image inserted in a FMS will cause DIS to crash in some cases.
- When deleting a ceph image, the associated tracing file is not deleted.
- Error message when using or changing favorite CS Adapt filters when the user was not logged as
administrator.
- Patient selection window comes forward after a camera acquisition.

CS 8100 3D

- Better management of the Twain.csv log file to prevent it from increasing too much.

CS 9300 Family

- Better management of the Twain.csv log file to prevent it from increasing too much.
- Integration of the latest Hasp key drivers to fix blue screen issues that could occur during installation.

© Carestream Dental, 2017 19

 DIS 1.11.0 | MAY 2015 |

New features

- CS Adapt Filters available for all extra-oral products except CS 8000 unit - Refer to
PN368_CS_Adapt_Release
- CS Mesh Viewer in stand-alone: must be installed manually from DIS Suite Tools folder

Fixed bugs

- Enable to acquire images using VDDS with CS Adapt filter

- CS Gestion “Facturation automatique” with CS Adapt filters
- Wrong RAM amount (both system and video card) displayed in DIS
- There are no ceph images in the List tab when launching the patient history from the window "Report".
- FMS file not updated after an import in automatic save mode
- Ceph , Pano and RVG 6200 images no longer have the mirror effect applied when changing the favorite

DIS 1.10.0 | APRIL 2015 |

Drivers Improvements

- Add by default in the Film Composer the template FMS 1to1 8x10 (in attachements) (only as FMS template
for DIS)
- Refer to PN00368_CS Adapt_release for CS 9x00_ CS 8100
- PN00370_RVG6200_CSAdapt

Fixed bugs

- The FMS is not saved even if the automatic save of new image and modification are checked in the
preferences.
- Set "Institution Address" in DIS options.
- Need to display Teeth numbers for 3D meshes.
- Store a video on DIS with the import.
- Save as "Same file" was enabled by default when importing a digital camera image.
- Ceph Contextual Menu on images showed angle value without any unit.
- CS 7200 applications was still running after a force to close DIS.
- A measure defined during calibration was not saved when the image is closed.
- Image Export - Multiple Tif choices (standard Tiff, Tiff-Cmp, Exif, Exif-Jpeg)
- The Radiological Log journal is not well updated after acquisitions with a Japonese OS.
- Only one image was sent to FilmComposer when using the image multi selection feature.
- Wrong behavior when importing old FMX tif file taken with TW 5.
- Image will be duplicated when the user inserts the image into FMS in DIS.
- Import an image into DIS and then save it with another date, displayed the old date when importing image.

© Carestream Dental, 2017 20