Hl Hdmi 200kvm Datasheet v2.2
Hl Hdmi 200kvm Datasheet v2.2
HL-HDMI-200KVM
1 HDMI video with local loop out + KVM + 1 forward 3.5 audio + 1 reverse IR signal
Overview
HDMI extender over ethernet is used to extend the transmission of HDMI audio and video signals, are usually used in the HDMI cable
limit length cannot meet the transmission distance.This product transmits HDMI audio and video signal up to 200M user through the
CAT5e/6 cable,equipment supports TCP/IP network protocol, can realize one transmitter to multiple receiver transmission through
ethernet switches, remote transmission while supporting local HDMI output, support infrared return transmission, independent audio
transmission, remote control of signal source (host-KVM,TV box-IR infrared), to ensure the stability of the signal while reducing the cost
for the user.the EDID built-in audio of HDMI extender over ethernet greatly improves the compatibility of the device.The equipment has
a long transmission distance, low use cost, convenient installation, good compatibility, and is a stable and efficient transmission mode.
Application
Board Diagram
Transmitter Reciever
holinktech.com 1
Specification
Video index
Video version HDMI 1.3 (full-digital)
HDCP protocol 1.2
Maximum pixel clock 148.5MHZ
Resolution 1920 x 1080p@60Hz
Effective cable length Less than 10m
Physical interface The HDMI-A interface
KVM(USB) index
Version 1.1
Tx physical interface USB female type A
Rx physical interface USB female type A
Audio index
Sampling frequency 32k、44.1k、48k、64k、88.2k、96k、176.4k、192kHz
Sampling depth 24bit
Dynamic bandwidth 96db
Total harmonic distortion(THD) -88db
Power Adaptor 2 pc
USB cable 1 pc
User Manual 1 pc
holinktech.com 2