Hand Tools

REVISED 08/23

PARTS CATALOGUE
SECTION 7

WESTWARDPARTS.COM
HAND TOOLS

INDEX
Abrasive Cleaning Tools..............................................7-14 Hacksaws......................................................................7-9
Abrasive Rolls ...........................................................7-15 Hacksaw Blades ...........................................................7-9
Aligning Bars...............................................................7-10 Hammers.....................................................................7-10
C-Clamps.....................................................................7-10 Hex Key Sets.................................................................7-6
Cutters ..........................................................................7-1 Hose Cutter...................................................................7-1
Calipers Jacks & Stands............................................................ 7-11
Digital ......................................................................7-1 Knives (Utility)..............................................................7-10
Vernier......................................................................7-1 Oil Drain Pan...............................................................7-16
Carbide Burrs .............................................................7-15 Pliers.............................................................................7-5
Chisels...........................................................................7-7 Punches........................................................................7-7
Cut-Off Wheels ..................................................7-12, 7-13 Ratchets........................................................................7-3
Digital Calipers .............................................................7-1 Screwdrivers..................................................................7-6
Drill Bits ......................................................................7-16 Socket Sets............................................................7-2, 7-3
Fencing Pliers................................................................7-5 Socket Accessories.......................................................7-3
Flap Discs ...................................................................7-13 Tape Measures............................................................7-10
Grease Guns ...............................................................7-8 Torque Wrenches........................................................7-14
Grease Hose Assemblies .............................................7-8 Utility Knives................................................................7-10
Grease Injector .............................................................7-8 Wire Brush...................................................................7-14
Grinding Discs ..................................................7-12, 7-13 Wrenches......................................................................7-4
Wrench Sets..................................................................7-4

www.westwardparts.com
 HAND TOOLS

CALIPERS
Electronic Digital Caliper
• Metric/inch conversion
• On/off switch
• Zero function
• Digital display
• Range: 0 to 6”
0 to 150 mm PART NO.
• Data output socket
• Molded storage case GHT78361

6" Vernier Caliper

• 0.05mm - 1/128” Vernier Scale
• Supplied with case.
• 6” (150mm) metric and inch scale.
• High quality steel, chrome hardened.
• Easy to read black numbers on satin chrome
surface.
• Inside, outside & depth measurements.
• Screw lock. PART NO.
• Surfaces are ground and lapped to promote
smooth slide operation. GHT1/128X1/20MM

CUTTERS
Pipe Cutter
Cuts Polyethylene, Polybutylene, PVC, ABS, rubber hose.
Cuts all sizes up to 1 1/4" I.D. It's fast, clean, safe, small and
light. Strong, tough nylon handles and replaceable stainless
steel blades.

PART NO. DESCRIPTION

THIS CUTTER WILL CUT FASTER THAN ANY OTHER PIPE CUTTER
SPP73070 Li'l Nipper Hose Cutter MADE - AND DO IT WITHOUT CREATING BURRS OR SAWDUST.

1-888-937-7278 7-1
HAND TOOLS

SOCKET SETS
1/2" Dr SAE Socket Wrench Set 20 Pc
PTA chrome sockets and accessories are made from high quality, chrome vanadium steel.
High torque design reduces corner rounding on your nuts and bolts.
Features oval-head quick release ratchets with a polished finish.
Well marked, durable blow mold keeps your tools organized.

Contents:
• SAE Regular (6 pt): 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, 1-1/16, 1-1/8, 1-3/16, 1-1/4
• Quick release oval head ratchet handle 10″
• Extension 5″, Extension 10″
• Flex Bar 15″ PART NO.
• U-Joint 2-3/4″
GHTT0027
• Blow mold case

1/2" Dr Chrome Socket Set - Metric

• Chrome vanadium construction
• High torque design
• Sizes: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, PART NO.
24, 25, 26, 27, 28, 29, 30 GHTT0090

1/2" Dr SAE/Metric Regular/Deep Socket Wrench Set 54 Pc

PTA chrome sockets and accessories are made from high quality, chrome vanadium steel.
High torque design reduces corner rounding on your nuts and bolts.
Features oval-head quick release ratchets with a polished finish.
Well marked, durable metal case keeps your tools organized.

Contents:
• SAE Regular (6 pt): 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, 1-1/16, 1-1/8,
1-3/16, 1-1/4
• SAE Deep: 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 7/8
• Metric Regular: 10,11,12,13,14,15,16,17,18,19,21,22,23,24,27,30,32
• Metric Deep: 10,12,13,14,15,16,17,18,19,21
PART NO.
• Quick release oval head ratchet handle 10″
• Extensions 5″ GHTT0032
• Sliding T-Handle 10″

3/4" Dr SAE Socket Wrench Set 21 Pc

PTA chrome sockets and accessories are made from high quality, chrome vanadium steel.
High torque design reduces corner rounding on your nuts and bolts.
Features oval-head quick release ratchets with a polished finish.
Durable metal case keeps your tools organized.

Contents:
• SAE Regular (12 pt): 3/4, 7/8, 15/16, 1, 1-1/16, 1-1/8, 1-3/16, 1-1/4, 1-5/16, 1-3/8, 1-7/16,
1-1/2, 1-5/8, 1-3/4, 1-7/8, 2
• Quick release oval head ratchet handle 20″ PART NO.
• Extension 3-1/2″, Extension 8″
• Sliding T-Handle 18″ GHTT0035

CALL FOR AVAILABILITY FOR NON-STOCKED TOOLS

7-2 www.westwardparts.com
 HAND TOOLS

SOCKET SETS
1" Dr SAE Socket Wrench Set 22 Pc
PTA chrome sockets and accessories are made from high quality, chrome vanadium steel.
High torque design reduces corner rounding on your nuts and bolts.
Features oval-head quick release ratchets with a polished finish.
Durable metal case keeps your tools organized.

Contents:
• SAE Regular: 1-7/16, 1-1/2, 1-5/8, 1-11/16, 1-3/4, 1-13/16, 1-7/8, 2, 2-/18, 2-3/16, 2-1/4, 2-3/8,
2-1/2, 2-5/8, 2-3/4, 2-15/16, 3-1/8
• Quick release oval head ratchet handle 26″ PART NO.
• Extension 8″, Extension 16″
• Sliding T-Handle 22″ GHTT0038

SOCKET ACCESSORIES
Ratchets - Oval Head Chrome Universal Joint
• PTA's oval head ratchet is our highest quality • Manufactured from chrome vanadium steel.
ratchet design.
• Manufactured from Chrome Vanadium steel. PART NO. DESCRIPTION
• Hardened and tempered with a chrome plated GHTT0276 3/8" Drive
mirror finish.
• Push button quick release. GHTT0403 1/2" Drive

PART NO. DRIVE RATCHET HEAD

GHTT0175 1/4"
GHTT0270 3/8" 72 Tooth Impact Universal Joint
GHTT0394 1/2" 72 Tooth • Manufactured from chrome molybdenum steel.
GHTT0585 3/4" 72 Tooth PART NO. DESCRIPTION
GHTT0805 1/2" Drive

1/4" DR Chrome Spinner Handle

• Durable plastic handle.
• Ideal for light tightening with 1/4 in.
square drive sockets 1/2" DR Chrome Adapters
PART NO. • Manufactured from chrome vanadium steel.

GHTT0185 PART NO. DRIVE DESCRIPTION

GHTT0404 1/2" Adapter 1/2″F to 3/8″M

Chrome Flex Bars GHTT0405 1/2" Adapter 1/2″F to 3/4″M

• Manufactured from chrome

vanadium steel.

PART NO. SIZE DRIVE MAX. TORQUE Impact Adapters

GHTT0274 8" 3/8" 100 ft-lbs • Manufactured from chrome molybdenum steel.
GHTT0401 15" 1/2" 330 ft-lbs
PART NO. DRIVE DESCRIPTION
GHTT0806 1/2" Adapter 1/2″F to 3/8″M
Chrome Extensions GHTT0807 1/2" Adapter 1/2″F to 3/4″M
• Manufactured from chrome vanadium steel.
GHTT0934 3/4" Adapter 3/4″F to 1/2″M
PART NO. SIZE DRIVE GHT07656 1" Adapter 1" F to 3/4" M
CALL GHTT0266 3" NON-STOCKED
FOR AVAILABILITY FOR 3/8" TOOLS
GHTT0267 6" 3/8"
GHTT0391 5" 1/2"
GHTT0392 10" 1/2"

1-888-937-7278 7-3
HAND TOOLS

WRENCHES
14 PC SAE Wrench Set Adjustable Wrenches
PTA raised panel wrenches industrial quality and are manufactured from Professional quality PTA adjustable wrenches
drop forged steel. are manufactured from drop forged steel and
This 14 piece set comes in a convenient pouch that can be wrapped up fully heat treated for increased strength and
for transport or hung on your shop wall. stability.
Sizes included: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, Feature an accurately machined sliding jaw for
1-1/16, 1-1/8, 1-1/4 smoother adjustment with a traditional handle
design.
PART NO.
GHTT4705 PART NO. SIZE MAX. OPENING
GHTT3005 8" 1"
GHTT3010 10" 1 1/4"
GHTT3015 12" 1 7/16"
GHTT3020 15" 1 13/16"

18 PC Metric Polished Wrench Set

PTA polished wrenches are manufactured from chrome vanadium steel. Pipe Wrenches
This 18 piece set comes in a convenient pouch that can be wrapped up PTA pipe wrenches are industrial quality
for transport or hung on your shop wall. and feature jaws manufactured from chrome
Sizes included: 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, vanadium steel with a hardness of HRC 55-60.
21, 22, 23, 24

PART NO. HANDLE SIZE JAW CAPACITY

GHTT2963 Steel 14" 2"
GHTT2964 Steel 18" 2 1/2"
PART NO. GHTT2965 Steel 24" 3"
GHTT4515 GHTT2985 Aluminum 30" 3"

Torque Wrenches
• Ratcheting head with quick release
• Each wrench is tested and certified in Canada to +4% accuracy
• Testing certificate included with each unit
• Meets or exceeds ASME B107.14M-2004 and BSEN26789

PART NO. LENGTH DRIVE TORQUE RANGE

GHTT3033 18 1/2" 3/8" 20-100 ft-lbs
GHTT3037 22" 1/2" 50-250 ft-lbs

CALL FOR AVAILABILITY FOR NON-STOCKED TOOLS

7-4 www.westwardparts.com
 HAND TOOLS

PLIERS
Slip Joint Pliers Diagonal Cutting Pliers
• Drop forged steel • Drop forged steel
• Cushion grips • Cushion grips

PART NO. SIZE PART NO. SIZE

GHTT2005 8" GHTT2030 6 1/2"

Slip Joint Pliers Pro Series Straight Jaw Locking Pliers

• Chrome vanadium steel • Made of Chrome Vanadium steel with
• Chrome nickel coating heat treated handles, pins and jaws for
• Ergonomic grips added durability.
• All locking pliers come with a wire cutter
PART NO. SIZE in the jaw.
GHTT1901 8" PART NO. SIZE
GHTT2120 7"
GHTT2125 10"
Groove Joint Pliers Pro Series
• Chrome vanadium steel
• Chrome nickel coating
• Ergonomic grips Fencing Pliers
• Made of drop forged alloy steel.
PART NO. SIZE • Polished head.
• PVC coated handles.
GHTT1971 10"
• Packed in plastic pouch.

PART NO. SIZE

GHTFP-1000 10"
Linesman Pliers
• Drop forged steel
• Cushion grips

PART NO. SIZE

GHTT2055 7"

Long Nose Pliers

• Drop forged steel
• Cushion grips

PART NO. SIZE

GHTT2015 6 1/2"

CALL FOR AVAILABILITY FOR NON-STOCKED TOOLS

1-888-937-7278 7-5
HAND TOOLS

SCREWDRIVERS
Slot Screwdrivers Robertson Screwdrivers
PTA screwdrivers feature PTA Robertson Screwdrivers
ergonomic cushion grip handles, feature ergonomic cushion grip
heavy duty chrome vanadium handles, heavy duty chrome
shafts and hardened magnetic vanadium shafts and hardened
tips. magnetic tips.

PART NO. HEAD SIZE SHAFT LENGTH TYPE PART NO. HEAD SIZE SHAFT LENGTH TYPE
GHTT3500 1/4 4 Regular GHTT3561 #1 8 Regular
GHTT3505 5/16 6 Regular GHTT3565 #2 5 Regular
GHTT3510 3/8 8 Regular
GHTT3525 3/16 4 Narrow
GHTT3530 3/16 6 Narrow
Multidrivers
• Multi-tip screwdriver with lightweight and durable
plastic handle houses 14 different screwdriver bits.
Phillips Screwdrivers • Contains:
PTA Phillips screwdrivers feature 4 Phillips bits: 0, 1, 2, 3
ergonomic cushion grip handles, 4 Robertson (square) bits: 0, 1, 2, 3
heavy duty chrome vanadium 2 Torks bits: T-15, T-20
shafts and hardened magnetic tips. 2 Skitted bits: 3/16″, 1/4″
1 Awl Point bit
PART NO. HEAD SIZE SHAFT LENGTH TYPE
PART NO.
GHTT3540 #1 3 Regula
GHTT5000
GHTT3547 #2 8 Regular

HEX KEY SETS

SAE Folding Hex Key Set 9 PC Metric Folding Hex Key Set 9PC
• Constructed from chrome vanadium steel for • Constructed from chrome vanadium steel for
lasting performance lasting performance
• Features SAE hex keys • Features metric hex keys
• Sizes: 5/64″, 3/32″, 7/64″, 1/8″, 9/64″, 5/32″, • Sizes: 1.5, 2, 2.5, 3, 4, 5, 5.5, 6, 8mm
3/16″, 7/32″, 1/4″ • Set include 9 pieces
• Set include 9 pieces

PART NO. PART NO.

GHTT2830 GHTT2834

CALL FOR AVAILABILITY FOR NON-STOCKED TOOLS

7-6 www.westwardparts.com
 HAND TOOLS

PUNCHES & CHISELS

7 PC Pin Punch Set

• Ideal for driving out and removing already loosened Solid Punches
pins and keys after initial movement by a solid or • Made of the highest grade carbon steel, accurately
standing punch. hardened and tempered preventing splintering and
• To prevent damage to a pin punch, use a solid extending life
punch to first loosen the pin. • Edges accurately tempered to stay sharp
• Contains: 1/16", 3/32", 1/8", 5/32", 3/16", 1/4", 5/16" • Working ends accurately ground and hardened to HRC
52-58 for maximum service
PART NO. • Striking end hardened to HRC-42 maximum – won’t chip
or mushroom
GHTT4990
PART NO. CUT SHANK LENGTH
GHTT4855 3/16" 1/2" 6"
GHTT4857 1/4" 1/2" 6"
16 PC Punch & Chisel Set
• Solid Punches are ideal for loosening frozen or tight pins and keys
prior to using a pin punch.
• Pin Punches are ideal for driving out and removing already loosened
pins and keys after initial movement by a solid or standing punch Centre Punches
• Centre punches are used to mark the center of a point, usually used • Made of the highest grade carbon steel, accurately
to mark the center of a hole when drilling holes. hardened and tempered preventing splintering and
• Cold chisels are used for cutting, shaping or removing metals extending life
softer than the chisel itself such as wrought iron, unhardened steel, • Edges accurately tempered to stay sharp
aluminum, brass and copper. • Working ends accurately ground and hardened to HRC
52-58 for maximum service
CONTAINS: • Striking end hardened to HRC-42 maximum – won’t chip
1/8 Pin Punch T4822 or mushroom
3/16 Pin Punch T4824
1/4 Pin Punch T4827 PART NO. CUT SHANK LENGTH
1/8 Solid Punch T4852
3/16 Solid Punch T4855 GHTT4872 3/16" 3/8" 5"
1/4 Solid Punch T4857 GHTT4873 5/16" 1/2" 6"
5/32 Centre Punch T4871
3/16 Centre Punch T4872
5/16 Centre Punch T4873
3/16 Drift Punch T4894
1/4 Drift Punch T4896
PART NO. 5/16 Cold Chisel T4801 Cold Chisels
1/2 Cold Chisel T4804 • Made of the highest grade carbon steel, accurately
GHTT4996 5/8 Cold Chisel T4807 hardened and tempered preventing splintering and
3/4 Cold Chisel T4810
extending life
7/8 Cold Chisel T4814
• Edges accurately tempered to stay sharp
• Working ends accurately ground and hardened to HRC 52-
58 for maximum service
• Striking end hardened to HRC-42 maximum – won’t chip or
Pin Punches mushroom
• Made of the highest grade carbon steel, accurately
hardened and tempered preventing splintering and PART NO. CUT SHANK LENGTH
extending life GHTT4804 1/2" 7/16" 6"
• Edges accurately tempered to stay sharp
GHTT4810 3/4" 5/8" 7"

PART NO. CUT SHANK LENGTH GHTT4814 7/8" 3/4" 7-1/2"

GHTT4823 5/32" 5/16" 5" GHTT4817 1" 3/4" 7-1/2"

GHTT4824 3/16" 3/8" 5-1/4"

CALL FOR AVAILABILITY FOR NON-STOCKED TOOLS

1-888-937-7278 7-7
HAND TOOLS

GREASE GUNS & INJECTORS

Grease Guns
• Supplied with 7" detachable metal spout.
• 3 way filling.
• 11" body accepts 14 oz. cartridges or can be filled by hand.
LUBG4805
PART NO. DESCRIPTION
LUBG4805 Lever type grease gun
LUBA480N Pistol grip type gun

Grease Gun Couplers

PART NO. DESCRIPTION
LUB806 / " NPT 3 JAW
1 8 LUBA480N
LUB806HD Heavy Duty Coupler - /8" NPT
1

Grease Hose Assemblies

• 3/16" I.D.
• Single Wire Braid
• 10,000 lbs. Burst Pressure

PART NO. DESCRIPTION

HYDW12 12" long
HYDW15 15" long
HYDW18 18" long

Grease Injectors
• Lubricate sealed bearings - the injector goes under or through seal.
• Prevents dust, moisture, and rust build up, and reduces friction wear.
• Regular servicing of machines and motors will add years to their life.
• The injector tip is thin, flexible, surgical grade stainless steel tapered to get
under the seal lip.
• The very fine outer diameter (19 to 20 gauge) of the tip allows insertion into the
small relube holes in the outer ring of some sealed bearings.
• Fits standard grease guns giving flexible access to bearings, perfect for those
hard to reach spots. PART NO.
LUBCGI-198

SEE CATALOGUE SECTION 4 - HARDWARE & LUBE

FOR MORE RELATED PRODUCTS!

CALL FOR AVAILABILITY FOR NON-STOCKED TOOLS

7-8 www.westwardparts.com
 HAND TOOLS

HACK SAWS
High Tension Hack Saw
PART NO.
• High tension hacksaw delivers higher tension to your
hacksaw blade for more demanding applications. GHTT6000

Hack Saw Blades

• PTA hacksaw blades are bi-hard and 12″ long, fit
both models of PTA hacksaw.

PART NO. DESCRIPTION LENGTH

GHTT6010 18 Tooth 12"
GHTT6011 24 Tooth 12"

Hand hack saw blades, bi-metal PART NO. SIZE

GHT1/2X12-24TPI / " x 12" x 24 TPI
1 2

GHT1/2X12-32TPI / " x 12" x 32 TPI

1 2

PART NO. DESCRIPTION SIZE

GHT1/2-64.5 Carbon steel hardback blade 1 2 / " x 64 1/2 " length
GHT1/2X64-1/2 Carbon steel flexback blade 1
/2" x 64 1/2 " length
GHT1/2X64-14 Matrix bi-metal blade 1
/2" x 64 1/2 " length

Carbon - Hard Edge - Hard Back (HB) Bi-Metal Matrix II

"Hard-Back" blades made from carbon steel have the same low heat "Matrix" bi-metal blades consist of a high-speed matrix cutting edge,
resistance as "Hard-Edge" blades. However, the hardened back accepts electron beam welded to a low alloy shock resistant back. The matrix
heavier feed pressure and blade tension than the "Hard-Edge" blade. cutting edge ressits heat in excess of 1000°F and, as a result, can cut
As a result, "Hard-Back" blades are often used on larger machines in hard materials at speeds up to 10 times faster than carbon blades.
production applications involving easy-to-machine materials. Matrix blades combine good heat and wear resistance with excellent
toughness and shock resistance. They are the blades of choice for high
speed, production type cutting involving a wide range of materials and/or
Carbon - Hard Edge - Flexible Back (HEF) cutting conditions.
"Hard-Edge" blades are made from carbon steel, and usually serve as
general purpose blades. They can cut relatively free machining metals,
as well as wood and plastic, and are used on light machines in situations
involving limited or occasional use. Because "Hard-Edge" blades only
withstand heat up to 400°F, they should not be used for harder materials
nor operated at excessively high speeds.

CALL FOR AVAILABILITY FOR NON-STOCKED TOOLS

1-888-937-7278 7-9
HAND TOOLS

HAMMERS & OTHER TOOLS

Ball Pein Hammers Utility Knives
Ball pein hammers have forged steel heads which
PTA offers a variety of utility knives to
are hardened and tempered for professional use.
fit your needs. Available in manual lock,
auto lock and screw lock there is a type
PART NO. HANDLE WEIGHT of cutter to fit your needs, be they an
GHTT3102 Fiberglass 16 oz everyday, inexpensive cutter to a high
quality everyday use type of cutter.
GHTT3103 Fiberglass 24 oz
GHTT3104 Fiberglass 32 oz
PART NO. LOCK TYPE DUTY BLADE P/N
GHTN1100 Manual Light GHTN1500 (10/pk)
GHTN1300 Auto-lock Standard GHTN1500 (10/pk)
Rubber Mallet
American hickory wood handle
with white striking face.

PART NO. WEIGHT

Light Duty C-Clamps
• Light duty malleable steel
GHTT3200 1 lb. C-Clamp.
• Swivel pad to clamp to various
shaped materials.

Sledge Hammer PART NO. SIZE MAX. OPENING THROAT DEPTH

Forged steel heads are hardened GHTT6216 10" 10-3/8" 3-3/4"
and tempered for professional use.

PART NO. HANDLE LENGTH WEIGHT

GHTT3116 Fiberglass 16" 4 lb.
4.5 Gallon Oil Drain Pan
For easy transfer of liquids. High-density polyethylene material is
resistant to chemicals and solvents, and is easy to clean.
1" wide diameter spout for quick and easy pouring. The anti-splash lip
and baffles help prevent spilling when carrying or pouring. Comes with
large, easy-grip handles.
Standard Tape Measures
• Wide Tape Measure 1-1/4″
• Rubber comfort grips PART NO.
• Nylon coated steel blades
• Co-molded rubber brakes GHT17942
• 3 blade stops

PART NO. SIZE WIDTH

GHTT2215 16' / 5m 1"
GHTT2225 25' x 7.5m 1"

Aligning Bars
PTA heavy duty aligning bars are manufactured from alloy
steel for superior pulling strength.

PART NO. LENGTH WIDTH

GHTT3309 24" 3/4"
GHTT3310 30" 3/4"

CALL FOR AVAILABILITY FOR NON-STOCKED TOOLS

7-10 www.westwardparts.com
 HAND TOOLS

JACKS & STANDS

12 Ton Heavy Duty Jack Stand
• Sturdy, welded steel construction for superior safety and strength
• One piece, multi-position ductile ratchet bar provides super strength and durability,
and quick adjustment mechanism that securely locks into desired location
• Counter-weighted pawl serves as a safe, secure locking device to prevent the load
from accidentally disengaging

HGIGHT HANDLE SADDLE DIMENSIONS

PART NO. WEIGHT
Min/Max LENGTH SIZE LENGTH X WIDTH
GHTOM32125 17.75” 27.63” 4.00” 1.50” 10.75” 12.00” 59.4 lbs.

20 Ton Long Chassis Service Jack with Air

• High speed Air TurboMotor is equipped to raise the load to the desired height efficiently,
effortlessly, and safely
• Wide stance and low center of gravity provide optimum stability under load stress
• Heavy gauge, steel frame helps prevent distortion or twisting
• Handle actuated release valve provides precise metered control of lowering speeds
• Convenient foot pedal designed for fast, no load lifts

HGIGHT HANDLE SADDLE JACK SIZE

PART NO. WEIGHT
Min/Max LENGTH DIAMETER LENGTH/WIDTH/HEIGHT
GHTOM22201 7.50” 26.00” 48.50” 6.00” 58.50” 20.38” 12.00” 543 lbs.

CALL FOR AVAILABILITY FOR NON-STOCKED TOOLS

1-888-937-7278 7-11
HAND TOOLS

GRINDING & CUT-OFF DISCS

Cutting Wheels - Type 27
Ultra-Grind Type 27 Cutting Wheels offer fast metal removal, cutting action and longer life than
thinner cut-off wheels. Ultra-Grind and Ultra-Chop stainless steel wheels are iron, chlorine and
sulphur free, for contamination free grinding and cutting.
These wheels are thicker than thin-type type 27 wheels and can be used for:
• Wheels 3/32″ or 1/8″ thick are used for cutting
• Wheels 5/32″ are used for pipeline applications, such as cutting, light grinding or root passes

PART NO. SIZE APPLICATION MAX. RPM

GHTAA1015 4-1/2 x 1/8 x 7/8 Metal 15,300
GHTAA1025 5 x 1/8 x 7/8 Metal 12,200

Ultra-Grind Depressed Center Grinding Wheels

Ultra-Grind Depressed Center Grinding Wheels offer fast metal removal and long life. Ultra-Grind
and Ultra-Chop stainless steel wheels are iron, chlorine and sulphur free.
5/32″ or ‘pipeline’ wheels can be used for cutting, light grinding or root passes when welding pipe.
1/4″ wheels are used exclusively for grinding.
Stainless Depressed Center Grinding Wheels can be used on steel for more aggressive cutting
and cooler grinding action. This action will contaminate the wheel, so they must not be reused on
stainless steel material again during their lifetime.

PART NO. SIZE APPLICATION MAX. RPM

GHTAA1020 4-1/2 x 1/4 x 7/8 Metal 13,200
GHTAA1030 5 x 1/4 x 7/8 Metal 12,200
GHTAA1065 7 x 1/4 x 7/8 Metal 8,600

Ultra-Grind Bench Grinding Wheels (6"-8")

PTA aluminum oxide, vitrified bond Ultra-Grind bench grinding wheels offer consistent and quality
performance for offhand deburring, shaping, metal removal and sharpening of parts and tools.
6-8″ wheels come complete with telescoping bushings down to 1/2″.
Grit guide: A24 is extra coarse, A36 is coarse, A46 is medium, A60 is fine.

PART NO. DIAMETER X WIDTH GRIT MAX. RPM

GHTA1506 6 x 3/4 x 1 A36 Coarse 4,138
GHTA1526 8 x 3/4 x 1-1/4 A36 Coarse 3,600
GHTA1532 8 x 1 x 1-1/4 A46 Medium 3,600

Bench Grinding Wheels (10"-14")

PTA aluminum oxide, vitrified bond bench grinding wheels offer consistent and quality performance
for offhand deburring, shaping, metal removal and sharpening of parts and tools.
10-14″ wheels do not come with bushings.

PART NO. DIAMETER X WIDTH GRIT MAX. RPM

GHTA1546 10 x 1-1/2 x 1-1/4 A36 Coarse 2,483

Bushings
PTA bushings are used to bush down bench wheels to fit arbors of various brands of grinder.
6-8″ grinding wheels come with telescoping bushings down to 1/2″.

PART NO. DESCRIPTION

GHTA5054 1-1/4 – 1″ – 7/8″ – 3/4″ – 5/8″ – 1/2″ x 1/2″ Wide

CALL FOR AVAILABILITY FOR NON-STOCKED TOOLS

7-12 www.westwardparts.com
 HAND TOOLS

GRINDING & CUT-OFF DISCS

Ultra-Chop Straight Cut-Off Wheels

The Ultra-Chop zip disc is the ultimate in cutting wheel technology and performance. Ultra-Chop
Straight Cut-off Wheels are made with a new and improved abrasive formula – resulting in elite
cutting performance. Side by side tests with competitive products show that Ultra-Chop cut-off
wheels are elite cutting wheels, with performance equal to or better than the market leader.
These wheels are ideal for cutting steel, stainless steel and INOX applications.

PART NO. SIZE ARBOR MAX. RPM

GHTAB1092 5 x .050 7/8 12,200

Flap Discs - Type 29

Flap discs combine the function of the grinding wheel and resin fibre disc by grinding,
blending and finishing with one product. This results in fewer changeovers and increased
productivity.
As the coated abrasive cloth wears down, new abrasive grains are exposed, producing a
consistently high cut rate.
Ultra-Grind flap discs feature phenolic backing with zirconia abrasive in a Type 29 shape.
They offer extra long life and superior performance on steel and stainless steel.
Flap disc grinding performance is greater than aluminum oxide grinding wheels and can
outlast resin fibre discs by up to 30 times.

PART NO. SIZE GRIT MAX

GHTD5050 5 x 7/8 60 12,150

Wolverine Abrasive Flap Disc - Type 29

Weiler Wolverine conical flap discs deliver a fast cut rate and consistent performance at a good value
when grinding steel and other metals.
The type 29 conical disc shape maximizes surface contact when grinding between 15° – 35° for
aggressive stock removal on flat surfaces while the 60 grit abrasive grain is ideal for edge beveling,
chamfering, weld grinding, blending, deburring, deflashing, and rust removal with an angle grinder.
Wolverine is an aggressive, get it done product line for everyday general purpose use.

PART NO. SIZE FILL DIAMETER ARBOR HOLE SIZE TYPE

GHT31345 4 1/2" Phenolic Backing, 60Z 7/8" Conical (TY29)
GHT31357 5" Phenolic Backing, 60Z 7/8" Conical (TY29)

Roll On Discs
Roll on Discs for surface conditioning are made of non-woven, compressible nylon fibers
impregnated with aluminum oxide grain with a Roll-on backing.
These discs attach to Roll-on pads for use on die grinders.
Generally used for surface preparation, finishing, deburring and blending of steel, stainless steel,
alloy steel, aluminum and wood.

PART NO. SIZE GRIT BOX QUANTITY

GHTDH1215 2 Coarse 50
GHTDH1216 2 Medium 50
GHTDH1220 3 Coarse 25
GHTDH1221 3 Medium 25

CALL FOR AVAILABILITY FOR NON-STOCKED TOOLS

1-888-937-7278 7-13
HAND TOOLS

ABRASIVE CLEANING TOOLS

Wolverine Medium Face Bench Grinder Wheel
Wolverine Medium Face Bench Grinder Wheel Brush provides a flexible brushing action and cost-
effective performance in general purpose cleaning and deburring applications. Wide face width covers
more area. For use on bench/pedestal and straight grinders.

PART NO. SIZE FILL DIAMETER ARBOR HOLE SIZE FACE WIDTH
GHT02325 6" 014" Crimped Steel Wire Fill 5/8"-1/2" 5/8"
GHT02335 7" 014" Crimped Steel Wire Fill 3/4" 5/8"

Standard Twist Knot Wire Wheel

Weiler 6" Standard Twist Knot Wire Wheel Brush provides a heavy-duty brushing action with some
flexibility for demanding deburring cleaning and surface preparation applications on somewhat
irregular surfaces. Featuring Weiler's individual knot hole construction, these radial brushes are
available in heat-treated steel, type 302 stainless steel and bronze wire for use in a wide variety of
applications.5/8"-11 nut for use on right angle grinders.

PART NO. SIZE FILL DIAMETER ARBOR HOLE SIZE FACE WIDTH
GHT08106 6" .023" Steel Fill 5/8"-11 UNC 1/2"

Wide Face Stem-Mounted Crimped Wire Wheel

Weiler 2" Wide Face Stem-Mounted Crimped Wire Wheel provides a flexible brushing action and
consistent performance for demanding light-duty cleaning and deburring applications on Steel. The
permanently-attached 1/4 in stem are intended for use on CNC,/Milling/Automatic Machines, Die
Grinders, Drills, Drill Presses, Right Angle Die Grinders and Straight Grinders. Although they can also
be mounted onto a drill, the speed and power of that tool will decrease the effectiveness of the brush.
Featuring Weiler's solid ring construction, these radial wheels are available in heat-treated steel, type
302 stainless steel and brass wire.

PART NO. SIZE FILL DIAMETER STEM

GHT17619 2" 0.0118"Steel Fill 1/4" Stem

Single Row Knot Wire Cup Brush

Weiler Single Row Knot Wire Cup Brush features a removable metal band around fill
material to reduce the exposed trim length and light weight brush flaring at operating
speed. Provides a very aggressive, controlled brushing action and the most consistent
performance for demanding cleaning applications on relatively flat surfaces. 5/8"-11 nut
for use on right angle grinders.
GHT13025

PART NO. SIZE FILL DIAMETER ARBOR HOLE SIZE TYPE

GHT13025 2 3/4" 0.14" Steel Fill 5/8"-11 UNC - GHT12316
GHT12301 4" 0.23" Steel Fill 5/8"-11 UNC Banded
GHT12316 4" 0.23" Steel Fill 5/8"-11 UNC Unbanded GHT12301

Vortec Pro Hand Wire Scratch Brush

• .012 Carbon Steel Fill
• Curved Handle PART NO.
• 3 X 19 Rows GHT25150

CALL FOR AVAILABILITY FOR NON-STOCKED TOOLS

7-14 www.westwardparts.com
 HAND TOOLS

ABRASIVE ROLLS
Shop rolls (emery cloth) rolls, are made with aluminum oxide grain with a flexible
cloth backing. These rolls provide fast, clean polishing, sanding and deburring in a
variety of applications in tool and welding shops.
The flexible cloth backing allows you to tear the roll to the desired length, and PTA
shop rolls tear easily along the length to make a thinner strip of abrasive to fit your
needs.
Each abrasive shop roll is in a durable cardboard box.
Available in 10 and 50 yard lengths.

PART NO. WIDTH LENGTH (Yard) GRIT

GHTDB1030 1" 10 80
GHTDB1040 1" 10 100
GHTDB1050 1" 10 120
GHTDB1060 1" 10 150
GHTDB1070 1" 10 180
GHTDB1090 1" 10 240
GHTDB1110 1" 10 320
GHTDB1230 1" 50 80
GHTDB1270 1" 50 180
GHTDB1290 1" 50 240
GHTDB1310 1" 50 320

METAL & STAINLESS CUTTING CARBIDE BURRS

Double Cut (D/C) burrs are the industry standard for metal removal, allowing for smaller chip production, eliminating
loading of the burr flutes and minimizing chatter. This is the smoothest and most popular cutting styles for most metals,
especially steel, stainless steel, alloys and exotics.
All burrs are double cut 1/4" shank.

Cylindrical Round Tree

PART NO. SIZE PART NO. SIZE
GHTCBSA1DC 1/4" x 5/8" GHTCBSF3DC 3/8" x 3/4"
GHTCBSA3DC 3/8" x 3/4" GHTCBSF5DC 1/2" x 1"
GHTCBSA5DC 1/2" x 1"

Cylindrical End Cut Pointed Tree

PART NO. SIZE
PART NO. SIZE
GHTCBSG1DC 1/4" x 5/8"
GHTCBSB1ADC 1/4" x 1"
GHTCBSG3DC 3/8" x 3/4"
GHTCBSB3DC 3/8" x 3/4"
GHTCBSG5DC 1/2" x 1"

Cylindrical Ball
PART NO. SIZE
GHTCBSC5DC 1/2" x 1"

CALL FOR AVAILABILITY FOR NON-STOCKED TOOLS

1-888-937-7278 7-15
HAND TOOLS

INDUSTRIAL SIDEWINDER DRILL BITS

Gold Oxide™ Drill Bits
Gold Oxide offers added speed and durability for general purpose drilling
applications in wood, metal and plastic. Speed Helix design makes these bits
3X faster than standard high speed steel drill bits
• Bits feature a 135-degree split point that starts fast and minimizes bit walking
or skating. Bits smaller than 1/8″ have 118-degree standard point.
• Bits larger than 3/8″ diameter have reduced shank for use in 3/8″ drills.

OVERALL FLUTE STANDARD

PART NO. DIAMETER
LENGTH LENGTH SHIPPING PACK
GHT40-2085 7/32" 3-3/4" 2-1/2" each 3/8" Reduced Shank
GHT40-2086 15/64" 3-7/8" 2-5/8" each OVERALL FLUTE STANDARD
PART NO. DIAMETER
LENGTH LENGTH SHIPPING PACK
GHT40-2089 17/64" 4-1/8" 2-7/8" each
GHT40-2100 25/64" 5-1/8" 3-3/4" each
GHT40-2090 9/32" 4-1/4" 2-15/16" each
GHT40-2101 13/32" 5-1/4" 3-7/8" each
GHT40-2092 5/16" 4-1/2" 3-3/16" each
GHT40-2103 7/16" 5-1/2" 4-1/16" each
GHT40-2093 21/64" 4-5/8" 3-5/16" each
GHT40-2094 11/32" 4-3/4" 3-7/16" each

JOBBER LENGTH TWIST DRILLS

Ultra-Kut Black and Gold Series Jobber Length Twist Drills are machined from special M2 hi-molybdenum steel. The 135⁰ split point
provides accurate self starting holes without the need for a center punch. The precision ground point, flutes, and body provide the
highest performance and accuracy. Ultra-Kut Black and Gold Series Jobber Length Twist Drills are recommended for use in work
hardening grades of stainless steel and other hard metal drilling applications. These twist drill bits are heat treated at 2185⁰ F and
nitro-carburized at 950⁰ F for measurably harder and longer lasting drill bits than standard high speed steel (HSS).

• 135⁰ Split point

• M2 hi-molybdenum High Speed Steel
• 3 flats on shanks above 3/16″

SIZE PART NO. SIZE PART NO.

1/16 GHTU0100 19/64 GHTU0115
5/64 - 5/16 GHTU0116
3/32 - 21/64 GHTU0117
7/64 - 11/32 GHTU0118
1/8 GHTU0104 23/64 GHTU0119
9/64 GHTU0105 3/8 GHTU0120
5/32 GHTU0106 25/64 GHTU0121
11/64 GHTU0107 13/32 GHTU0122
3/16 GHTU0108 27/64 GHTU0123
13/64 GHTU0109 7/16 GHTU0124
7/32 GHTU0110 29/64 -
15/64 GHTU0111 15/32 -
1/4 GHTU0112 31/64 GHTU0127
17/64 GHTU0113 1/2 GHTU0128
9/32 GHTU0114

CALL FOR AVAILABILITY FOR NON-STOCKED TOOLS

7-16 www.westwardparts.com
 HAND TOOLS

JOBBER LENGTH TWIST DRILL INDEX

• 29 Piece
• 1/16 to 1/2 by 64ths
• Contains Ultra-Kut Black & Gold Series twist drills
• Custom Huot metal case

PART NO. DESCRIPTION

GHTU0148 29 Piece Ultra-Kut Jobber Drill Set

SEE CATALOGUE SECTION 19 - SHOP SUPPLIES & ACCESSORIES

FOR MORE RELATED PRODUCTS!

CALL FOR AVAILABILITY FOR NON-STOCKED TOOLS

1-888-937-7278 7-17