<<Contents>> <<Index>>

General Conductivity
Specifications Detectors/Sensors

GS 12D08G02-E

■ GENERAL YOKOGAWA also provides many kinds of detectors/

sensors for accurately measuring liquid conductivity when
YOKOGAWA has been supplying superior on-line using converters/transmitters.
analyzers for monitoring or controlling the conductivity of
liquid or solutions. The combination of YOKOGAWA’s converters/transmitter
and detectors/sensors meets the demanding
Now, YOKOGAWA provides the four-wire conductivity ultrapurewater requirements of the growing semiconductor
converter, ( SC450G), the two-wire conductivity transmitter and pharmacentical markets in addition to traditional water
(FLXA21, SC202). quality measurements for standard power plant and
chemical applications.

SC4AJ SC8SG SC210G

Adapter Mounting Flow-through Type Screw-in Type

F01.EPS F02.EPS F03.EPS

Four-wire Conductivity Converter Two-wire Conductivity Two-wire Conductivity Transmitter

SC450G Transmitter FLXA21 SC202SJ/SC202G

F07.EPS
F07-1.EPS

Refer to GS 12D08N05-01E Refer to GS 12A01A02-01E Refer to GS 12D08B02-E

Yokogawa Electric Corporation GS 12D08G02-E

2-9-32, Nakacho, Musashino-shi, Tokyo, 180-8750 Japan © Copyright Dec. 2000
Tel.: 81-422-52-5617 Fax.: 81-422-52-6792 1st Edition Dec. 2000
8th Edition Oct. 2010
<<Contents>> <<Index>> 2
■ Models of Conductivity Detectors/Sensors
SC4AJ

-AD-09 -AD-15 -SA -SB -SC

Adapter Adapter Welding 1 or 1.5 inch welding 2 inch welding
Mounting Type Mounting Type Socket Type Clamp Type Clamp Type
(Sensor length: 9cm) (Sensor length: 15cm)

SC8SG

Screw-in Type Flow-through Type Flow-through Type Flow-through Type

(Screw Jointed) (Screw Jointed) (Flange Jointed)
Chamber Material : SCS14 Chamber Material : PP

SC210G

Screw-in Type Flange Type Flow-through Type Screw-in Type

with Gate Valve
F08.EPS

■ RANGE OF MEASURING UPPER RANGE LIMIT OF EACH SENSORS

(C=0.02cm-1)
SC4AJ*1 0.5mS/cm 200mS/cm NOTE:
(C=0.1cm-1) The bar graph at the left shows the range of the upper range
SC4AJ*1
5mS/cm 1 mS/cm limit of each sensor. For example, in the case of SC8SG-R61,
SC4AJ*2 (C=0.02cm-1) the measuring range is from 0-1 mS/cm to 0-1 S/cm.
100mS/cm 1 mS/cm In measurement in high conductivity range, polluted solution
may affect measured values of any sensors.
SC4AJ*2 (C=0.1cm-1)
500mS/cm 5 mS/cm C represents cell constant.
SC4AJ*3 (C=0.1cm-1)
500mS/cm 1 mS/cm
Note that when used in combination with the SC100 converter,
SC210G-A (C=0.05cm-1) the SC4AJ sensor has different measuring range depending
200mS/cm
0.5mS/cm on the material and so forth.
(C=5cm-1)
SC210G-B
200mS/cm 20 mS/cm
*1 : In case of the combination with the SC450G,
SC8SG-R61 (C=10cm-1) FLXA21, SC202G, or SC202SJ
0.5mS/cm 100mS/cm 1mS/cm 1 S/cm *2 : In case of the combination with the SC100 (Titanium)
SC8SG-R31 (C=0.01cm-1) *3 : In case of the combination with the SC100 (SUS)

1 (mS/cm) 1 (mS/cm) 1 (S/cm) F09.EPS

Conductivity

All Rights Reserved. Copyright © 2000, Yokogawa Electric Corporation GS 12D08G02-E 8th Edition Oct.08, 2010-00
<<Contents>> <<Index>> 3
■ GENERAL SPECIFICATIONS Weight:
Sensors:
1. SC4AJ: Adapter mounting type
Cable with pin terminals (applicable to SC100, FLXA21, (SC4AJ-S-AD-09-002-05): approx.450 g
SC202G and SC202SJ) Adapter mounting type
Cable with M3 ring terminals (applicable to SC450G, (SC4AJ-S-AD-15-002-05): approx.520 g
SC202u/TB) Welding socket type
Cable with M4 ring terminals (applicable to FLXA21) (SC4AJ-S-SA-NN-002-05): approx.670 g
Object of measurement: 1 or 1.5 inch welding clamp type
Conductivity of solutions (SC4AJ-S-SB-NN-002-05): approx.550 g
Measuring principle : Two-electrode system 2 inch welding clamp type
Cell constant : 0.02cm-1, 0.1cm-1 (SC4AJ-S-SC-NN-002-05): approx.670 g
Measuring range : (Note) There are weight differences among SC4AJ
For a cell constant: 0.02cm-1 sensors. In order to know the more accurate weight
In case of the combination with the SC450G, of each type of sensors, please calculate it from
FLXA21,SC202G or SC202SJ: following information. The cable weighs 75 g/m. The
0 - 0.5 µS/cm to 0 - 200 µS/cm SC4AJ with 0.02cm-1 cell constant is 15 gram
In case of the combination with the SC100: heavier than the SC4AJ with 0.1cm-1 cell constant.
0 - 100 µS/cm to 0 - 1 mS/cm SUS314L electrode is 40 g heavier than Titanium
electrode.
(Material: Titanium only, SC100 can not use
Adapters:
with SC4AJ sensor made of SUS which cell
3/4NPT stainless steel adapter (/PS)
constant is 0.02 cm-1.)
:approx. 110 g
For a cell constant: 0.1cm-1
R3/4 stainless steel adapter (/RS):approx. 110 g
In case of the combination with the SC450G
3/4NPT PVDF adapter (/PF) : approx. 35 g
, FLXA21,SC202G or SC202SJ:
R3/4 PVDF adapter (/RF) : approx. 35 g
0 - 5 µS/cm to 1 mS/cm
Straight welding socket (/SA1) : approx. 300 g
In case of the combination with the SC100:
Angle welding socket 15 (/SA2) : approx. 320 g
0 - 500 µS/cm to 0 - 5 mS/cm
Welding clamp 1 inch (/SB1) : approx. 330 g
(Material: Titanium)
Welding clamp 1.5 inch (/SB2) : approx. 305 g
In case of the combination with the SC100:
Welding clamp 2 inch (/SC1) : approx. 350 g
0 - 500 µS/cm to 1 mS/cm (Material: SUS) (note) Do not submerge the sensor itself in process water,
Temperature Range: For electrode, 0 to 110°C as the seams between the mold and the metal of
For holder, see Figure 1 the sensor are not waterproof.
Sterilization for electrode:
135°C (275°F), within 30 minutes in 2. SC8SG:
Steam Sterilization Cable with pin terminals (applicable to FLXA21,SC202G
Pressure range : For electrode, 0 to 1 MPa and SC202SJ)
For holder, see Figure 1 Cable with M3 ring terminals (applicable to SC450G,)
MPa Cable with fork terminals (applicable to SC202G and
SC202u/TB)
1.2
Cable with M4 ring terminals (applicable to FLXA21)
1.0 Object of measurement:
0.8 Conductivity of liquids
0.6 SUS316L Measuring Principle: 2-electrode system or 4-electrode
0.4 PVDF system
0.2 Cell Constants : 0.01 cm-1 or 10 cm-1
(for two-electrode system)
0 10 20 30 40 50 60 70 80 100 120 140 10 cm-1 (for four-electrode
˚C system)
F10.EPS Measuring Ranges : 0 - 0.5 µS/cm to 0 - 100 µS/cm for
Figure 1 The range of tolerance of holders (option: /PS, a cell constant of 0.01 cm-1
/PF, /RS, /RF, /SA1, /SA2, /SB1, /SB2, /SC1) for 0 - 1 mS/cm to 0 - 1000 mS/cm
temperature and pressure for a cell constant of 10 cm-1
Temperature Range: 0˚ to 100˚C (130˚C maximum only
Sample solution condition: for 0.01 cm-1 cell constant
Although flow rate is not limited in detectors, excluding those with
measurement, air bubbles should not polypropylene chambers)
be mixed in the sample solutions to Pressure : 1000 kPa max. (500 kPa maxi-
obtain correct measured values. mum for detectors with polypropy-
Temperature sensor: Pt1000 lene chambers)
Materials Flow rate of Sample Solution:
Body & Electrode : SUS316L (for all Fitting-type) or No particular limitation applies,
Titanium (only for adapter mounting although a value of less than 20 l/
type-AD), Viton O-ring min. is recommended for flow-
Isolator : PEEK through detectors.
Mounting adapter : Plyvinylidene difluoride (for /PF and /
RF) or SUS316, SUS316L

All Rights Reserved. Copyright © 2000, Yokogawa Electric Corporation GS 12D08G02-E 8th Edition Nov.21, 2012-00
<<Contents>> <<Index>> 4
(Note) No limitation applies to flow rate (flow velocity) as far Diameter: 9.2 mm
as measurement is concerned. Take care, however, Material : Thermoplastic PVC
when using flow-through detectors. Electrodes or
the inner walls of a liquid chamber may wear put 4. SC210G:
drastically at higher flow speeds if a measured
solution contains slurry. Air bubbles should not be Cable with ring terminals (applicable to FLXA21,
mixed in the sample solutions to obtain correct SC202G/TB and SC202SJ/TB)
measured values. Cable with M3 ring terminals (applicable to SC450G,
RTD for Temperature Compensation: SC202u/TB)
Pt1000 (built into the sensor) Cable with pin terminals (applicable to FLXA21,SC202G
Construction : Rainproof encapsulation (compat- and SC202SJ)
ible with the JIS C0920 Japanese Cable with M4 ring terminals (applicable to FLXA21)
Industrial Standard) Object of measurement:
Weight : Conductivity of solutions
Screw-in type Measuring principle : Two-electrode system
approximately 1.3 kg (excluding the cable) Cell constant : 0.05 cm-1, 5 cm-1
Flow-through type (SCS14 chamber) Measuring range : 0 - 0.5 mS/cm to 0 - 200 mS/cm
approximately 3.1 kg (excluding the cable) (Cell constant: 0.05 cm-1)
Flow-through type (SCS14 chamber, flanged) 0 - 200 mS/cm to 0 - 20 mS/cm
approximately 4.5 kg (excluding the cable) (Cell constant: 5 cm-1)
Flow-through type (polypropylene chamber) Temperature Range: 0 to 105°C
approximately 2.7 kg (excluding the cable) (chamber material: SCS14)
Flow-through type (polypropylene chamber, flanged) 0 to 100°C
approximately 3.2 kg (excluding the cable) (chamber material:
Cable Polypropylene)
0.3 kg for 5.5-m length; 0.5 kg for 10-m Pressure range : 0 to 1 MPa
length; 0.9 kg for 20-m length. (chamber material: SCS14)
Process Connection: Screw-in or flow-through 0 to 500 kPa
Construction of Wetted Part: (chamber material: Polypropylene)
• Sensor-holding base: Measuring solution condition:
SUS316 and fluoro-rubber when using screw- Although flow rate is not limited in
in type holder or the chamber made of measurement, less than 20 l/min
stainless steel. PP and fluoro-rubber when is recommended for flow-through
using the chamber made of PP. type. If slurry is included in
• 0.01 cm-1 cell constant, two-electrode sensor: sample solutions in flow-through
SUS316 and ethylene chloride trifluoride type detectors, the electrode part
• 10 cm-1 cell constant, two-electrode sensor: and the inside of solution chamber
reinforced epoxy resin and graphite may be worn significantly.
• 10 cm-1 cell constant, four-electrode sensor: Air bubbles should not be mixed
polyvinylidene difluoride, glass and platinum in the sample solutions to obtain
• Stem (flow-through type): correct measured values.
SCS14 or polypropylene resin Temperature sensor: Thermistor (PB36NTC)
Installation : Wet part Materials
• Screw-in type—held by the process piping SC210G-A : For sensor, SUS 316 stainless
• Flow-through type (polypropylene chamber) steel, Viton (O-ring) and
—mounted on a pipe (nominal Polytrifluorochloroethylene
diameter of 50 mm ±2 in.) For body, SUS316 stainless steel,
• Flow-through type (SCS14 chamber) polypropylene and Viton (O-ring)
—held by the process piping SC210G-B : For sensor, Platinum, glass and
Viton (O-ring)
3. WU41: Dedicated cable for the SC8SG For body, SUS316 stainless steel,
polypropylene and Viton (O-ring)
Cable : Six multicore wire
Construction : JIS C0920 watertight (equal to
Applicable transmitter/converter with various detectors NEMA 4)

Detector SC4AJ SC8SG SC210G

Type of terminals Pin Ring M4 Ring M3 Pin Ring M4 Ring M3 Pin Ring M4 Ring M3

Converter: SC100 Yes N.A. N.A. N.A.

Transmitter: Yes Yes Yes
Yes N.A. Yes N.A. Yes N.A.
SC202G, SC202SJ (Note 1) (Note 1) (Note 1)

Converter:
Yes N.A. N.A. Yes N.A. N.A. Yes N.A. N.A.
SC402G (Note 3)
Converter: SC450G Note2 N.A. Yes Note2 N.A. Yes Note2 N.A. Yes
Analyzer: FLXA21 Yes Yes N.A. Yes Yes N.A. Yes Yes N.A.
Note1: Applicable when option code /TB (screw terminal) specified for SC202G/SC202SJ.
Note2: Both pin and M3 ring can be used for SC450G, but M3 ring are recommended.
Note3: SC402G has been terminated. T07-1.EPS

All Rights Reserved. Copyright © 2000, Yokogawa Electric Corporation GS 12D08G02-E 8th Edition Oct.08, 2010-00
<<Contents>> <<Index>> 5
■ MODEL AND SUFFIX CODES
1. SC4AJ

Model Suffix Code Option Code Description

SC4AJ Conductivity sensor

Material -T Titanium (Only for - AD)
-S SUS316L
Fitting type - AD Adapter mounting type
- SA Welding socket type *1
- SB 1 or 1.5 inch welding clamp type *2
- SC 2 inch welding clamp type *2
Sensor length - 09 9 cm (Code for -AD)
- 15 15 cm (Code for -AD)
- NN fixed length (Code for -SA, -SB, -SC)
Cell constant - 002 0.02 cm-1
- 010 0.1 cm-1
Cable length - 03 3 m (pin terminals)
- 05 5 m (pin terminals)
- 10 10 m (pin terminals)
- 15 15 m (pin terminals) *3
- 20 20 m (pin terminals) *3
- X1 3 m (M4 ring terminals) *5
- X2 5 m (M4 ring terminals) *5
- X3 10 m (M4 ring terminals) *5
- X4 15 m (M4 ring terminals) *5
- X5 20 m (M4 ring terminals) *5
- Y1 3 m (M3 ring terminals) *6
- Y2 5 m (M3 ring terminals) *6
- Y3 10 m (M3 ring terminals) *6
- Y4 15 m (M3 ring terminals) *6
- Y5 20 m (M3 ring terminals) *6
Temperature sensor - T1 Pt1000
Option For AD only /PS 3/4NPT adapter SUS316
/PF 3/4NPT adapter PVDF
/RS R3/4 adapter SUS316
/RF R3/4 adapter PVDF
For SA only /SA1 Straight welding socket SUS316L
/SA2 Angled welding socket 15° SUS316L
For SB only /SB1 Welding clamp 1 inch SUS316L
/SB2 Welding clamp 1.5 inch SUS316L
For SC only /SC1 Welding clamp 2 inch SUS316L
Oil prohibit /DG1 Oil-prohibited use *4
*1: When you select fitting type -SA, place an order on the SC4AJ with option code /SA1 or /SA2.
*2:When you select fitting type -SB, place an order on the SC4AJ with option code /SB1 or /SB2 (including seal ring),
When you select fitting type -SC, place an order on the SC4AJ with option code /SC1(including seal ring).
*3: Impossible use for the SC400G
T01.EPS
*4: Washing treatment of wet part with alcohol.
*5: Used for connection to FLXA21. *6: Used for connection to SC450G, SC202u/TB.

Spare parts for SC4AJ

Parts No. Description

K9670MA O-ring set for -SA
K9670MK Seal rings for /SB1 or /SB2
K9670MP Seal rings for /SC1
K9670MT 3/4 NPT Stainless steel adapter for -AD
K9670MU 3/4 NPT PVDF Adapter for -AD
K9670MV R3/4 Stainless steel adapter for -AD
K9670MW R3/4 PVDF Adapter for -AD
K9670MD Angled welding socket and mounting nut for -SA
K9670ME Staight welding socket for -SA
K9670MB Angled welding socket for -SA
K9670MC Straight welding socket for -SA
K9670ML Welding clamp 1 or 1.5 inch for -SB
K9670MQ Welding clamp 2 inch for -SC
T02E.EPS

All Rights Reserved. Copyright © 2000, Yokogawa Electric Corporation GS 12D08G02-E 8th Edition Nov.21, 2012-00
<<Contents>> <<Index>> 6
2. SC8SG

Model Suffix Code Option Code Description

SC8SG Conductivity detector
Measuring -R31 Cell constant: 0.01cm-1
range -R61 Cell constant: 10cm-1
Electrode -T 2-electrode system (for both 0.01cm-1 and 10cm-1 cell constants)
configuration - for general measurements *1
-F 4-electrode system (for 10cm-1 cell constant only)
- for countermeasures against polarization due to contamination *2
Screw-in model - 100 with welding socket *3
- 101 without welding soket
(a welding socket [K9208BK] should be ordered separately)
Construction

Flow-through - 302 Rc1/2 female threaded; chamber material: SCS14

model *7 - 312 Rc1/2 female threaded; chamber material: PP
- 303 1/2NPT female threaded; chamber material: SCS14
- 313 1/2NPT female threaded; chamber material: PP
- 304 JIS 10K 15 RF flange; chamber material: SCS14
- 314 JIS 10K 15 FF flange; chamber material: PP
- 305 ANSI Class150 1/2 RF flange with serration; chamber material: SCS14
- 315 ANSI Class150 1/2 FF flange; chamber material: PP
Cable length - P1 5.5m (special cable supplied with detector) (pin terminals)
- P2 10m (special cable supplied with detector) (pin terminals)
- P3 20m (special cable supplied with detector) (pin terminals)*4
- F1 5.5m (special cable supplied with detector) (fork terminal)
- F2 10m (special cable supplied with detector) (fork terminal)
- F3 20m (special cable supplied with detector) (fork terminal)*4
- X1 5.5m (special cable supplied with detector) (M4 ring terminal)*5
- X2 10m (special cable supplied with detector) (M4 ring terminal)*5
- X3 20m (special cable supplied with detector) (M4 ring terminal)*5
- Y1 5.5m (special cable supplied with detector) (M3 ring terminal)*6
- Y2 10m (special cable supplied with detector) (M3 ring terminal)*6
- Y3 20m (special cable supplied with detector) (M3 ring terminal)*6
Style code ∗A Style A
Option /PS SUS Mounting hardware (for PP chamber)
/SS SUS Mounting hardware (for SCS14 chamber)

*1 : The cell constant is 0.01cm-1 when the combiration of measuring range R31 and Electrode configuration - T is chosen.
The cell constant is 10cm-1 when the combination of measuring range R61 and Electrode configuration - T is chosen.
*2 : Electrode configuration - F cannot be chosen when R31 is chosen. For process where can give contamination to a detector, a
four-electrode detector, the combination of R61 and - F, should be used.
*3 : If a welding socket (K9208BK) needs to be ordered beforehand, either place a separate order or prepare one by referring to the
extemal view later in this brochure.
*4 : Impossible use for the SC400G.
*5 : Used for connection to FLXA21. *6 : Used for connection to SC450G, SC202u/TB.
*7 : The model is not equipped with a mounting hardware, please place an order on the SC8SG with option code /PS or /SS
when you select flow-through model.
T03.EPS
The PP chamber can have cracks or splits unless it is not supported by a mounting hardware.

3. WU41

Model Suffix code Option code Description

WU41 Dedicated Cable for SC8SG
Cable end -F fork terminals
-P pin terminals
-X M4 ring terminals *1
-Y M3 ring terminals *2
Cable length -05 5.5 m
-10 10 m
-20 20 m
*1: Used for connection to FLXA21. T13.EPS
*2: Used for connection to SC450G, SC202u/TB

All Rights Reserved. Copyright © 2000, Yokogawa Electric Corporation GS 12D08G02-E 8th Edition Oct.08, 2010-00
<<Contents>> <<Index>> 7
Spare Parts for SC8SG

Parts No. Description

-1
K9208BA 0.01cm cell constant, two-electrode sensor
K9208BC 10cm-1 cell constant, two-electrode sensor
K9208BD 10cm-1 cell constant, four-electrode sensor
K9208BK Welding socket for screw-in model
G9303EB O-ring
4. SC210G T04.EPS

Model Suffix Code Option Code Description

SC210G Conductivity detector
Measuring -A Low range; cell constant: 0.05cm -1
range -B Medium range; cell constant: 5cm -1
Screw-in type - 100 R1-1/2
- 103 1-1/2NPT male
Flange type - 206 JIS 10K 50 RF flange
- 207 ANSI Class150 2 RF flange (with serration)
- 208 JPI Class150 2 RF flange
Flow-through - 302 Rc1/2 female, chamber material : SCS14
Construction

type*1 - 312 Rc1/2 female, chamber material : PP

- 303 1/2NPT female, chamber material : SCS14
- 313 1/2NPT female, chamber material : PP
- 304 JIS 10K 15 RF flange, chamber material: SCS14
- 314 JIS 10K 15 FF flange, chamber material: PP
- 305 ANSI Class150 1/2 RF flange with serration, chamber material: SCS14
- 315 ANSI Class150 1/2 FF flange, chamber material: PP
- 306 JPI Class150 1/2 RF flange, chamber material: SCS14
With gate valve - 402 R1-1/4
- 403 1-1/4NPT male
Sensor length - L015 150mm (Standard)
- L030 300mm*2
- L050 500mm*2
- L100 1000mm*2
- L150 1500mm*2
- L200 2000mm*2
Cable length - 03 3m (M4 ring terminals) *4
- 05 5m (M4 ring terminals) *4
- 10 10m (M4 ring terminals) *4
- 15 15m (M4 ring terminals) *4
- 20 20m (M4 ring terminals) *3 *4
- AA 3m (pin terminals)
- BB 5m (pin terminals)
- CC 10m (pin terminals)
- DD 15m (pin terminals)
- EE 20m (pin terminals)*3
- Y1 3m (M3 ring terminals) *5
- Y2 5m (M3 ring terminals) *5
- Y3 10m (M3 ring terminals) *5
- Y4 15m (M3 ring terminals) *5
- Y5 20m (M3 ring terminals) *5
Style code ∗A Style A
Option /SCT Stainless steel tag plate
/ANSI With ANSI connection adaptor *6
/PF DAI-ELperfrow (perfluoro-elastomer) specification*7
/PS SUS mounting hardware (for PP construction)
/SS SUS mounting hardware (for SCS14 construction)
/X1 Epoxy-coated (baked)
/DG1 Oil-prohibited use (Degrease cleaning treatment) (except for gate valve)
/MCT Material Certificate *8 (except for gate valve)
*1: The model is not equipped with a mounting brackets, place an order on the SC210G with option code /PS or /SS when you select
flow-through model. The PP chamber material can have cracks or splits unless it is not supported by a mounting hardware.
*2: Only for Screw-in type and Flange type
*3: Impossible use for the SC400G
*4: Used for connection to FLXA21. *5: Used for connection to SC450G or SC202/TB.
*6: Adaptor for cable inlet (carbon steel)
T05.EPS
*7 Materials for O-ring of electrode assembly and chamber seal become perfluoro-elastomer .
But, in construction -402 and -403, the sealing part of gate valve doesn’t become the elastomer
.
*8: Additional lead time is required.

All Rights Reserved. Copyright © 2000, Yokogawa Electric Corporation GS 12D08G02-E 8th Edition Oct.08, 2010-00
<<Contents>> <<Index>> 8
Spare Parts for SC210G

Parts No. Description

K9208EA 150mm electrode Assembly (C=0.05cm-1) for SC210G-A
K9208EB 500mm electrode Assembly (C=0.05cm-1) for SC210G-A
K9208EC 1000mm electrode Assembly (C=0.05cm-1) for SC210G-A
K9208ED 1500mm electrode Assembly (C=0.05cm-1) for SC210G-A
K9208EE 2000mm electrode Assembly (C=0.05cm-1) for SC210G-A
K9208EF 300mm electrode Assembly (C=0.05cm-1) for SC210G-A
K9315NA 150mm electrode Assembly (C=0.05cm-1) with perfluoro-elastomer, for SC210G-A
K9315NB 500mm electrode Assembly (C=0.05cm-1) with perfluoro-elastomer, for SC210G-A
K9315NC 1000mm electrode Assembly (C=0.05cm-1) with perfluoro-elastomer, for SC210G-A
K9315ND 1500mm electrode Assembly (C=0.05cm-1) with perfluoro-elastomer, for SC210G-A
K9315NE 2000mm electrode Assembly (C=0.05cm-1) with perfluoro-elastomer, for SC210G-A
K9315NF 300mm electrode Assembly (C=0.05cm-1) with perfluoro-elastomer, for SC210G-A
K9208KA Electrode Assembly (C=0.05cm-1) of gate valve type for SC210G-A
K9315NN Electrode Assembly (C=0.05cm-1) of gate valve type with perfluoro-elastomer for SC210G-A
K9208JA 150mm electrode Assembly (C=5cm-1) for SC210G-B
K9208JB 500mm electrode Assembly (C=5cm-1) for SC210G-B
K9208JC 1000mm electrode Assembly (C=5cm-1) for SC210G-B
K9208JD 1500mm electrode Assembly (C=5cm-1) for SC210G-B
K9208JE 2000mm electrode Assembly (C=5cm-1) for SC210G-B
K9208JF 300mm electrode Assembly (C=5cm-1) for SC210G-B
K9315NG 150mm electrode Assembly (C=5cm-1) with perfluoro-elastomer, for SC210G-B
K9315NH 500mm electrode Assembly (C=5cm-1) with perfluoro-elastomer, for SC210G-B
K9315NJ 1000mm electrode Assembly (C=5cm-1) with perfluoro-elastomer, for SC210G-B
K9315NK 1500mm electrode Assembly (C=5cm-1) with perfluoro-elastomer, for SC210G-B
K9315NL 2000mm electrode Assembly (C=5cm-1) with perfluoro-elastomer, for SC210G-B
K9315NM 300mm electrode Assembly (C=5cm-1) with perfluoro-elastomer, for SC210G-B
K9208MA Electrode Assembly (C=5cm-1) of gate valve type for SC210G-B
K9315NP Electrode Assembly (C=5cm-1) of gate valve type with perfluoro-elastomer for SC210G-B
K9315QA 3m cable for SC210G (M4 ring terminals, SC210G...-03)
K9315QB 5m cable for SC210G (M4 ring terminals, SC210G...-05)
K9315QC 10m cable for SC210G (M4 ring terminals, SC210G...-10)
K9315QF 15m cable for SC210G (M4 ring terminals, SC210G...-15)
K9315QG 20m cable for SC210G (M4 ring terminals, SC210G...-20)
K9315QR 3m cable for SC210G (pin terminals)
K9315QS 5m cable for SC210G (pin terminals)
K9315QT 10m cable for SC210G (pin terminals)
K9315QU 15m cable for SC210G (pin terminals)
K9315QV 20m cable for SC210G (pin terminals)
K9315QJ 3m cable for SC210G (M3 ring terminals)
K9315QK 5m cable for SC210G (M3 ring terminals)
K9315QL 10m cable for SC210G (M3 ring terminals)
K9315QM 15m cable for SC210G (M3 ring terminals)
K9315QQ 20m cable for SC210G (M3 ring terminals)
K 9 0 5 0 AT Viton O-ring (for screw-in type, flange type and flow-through type)
K9050MR Viton O-ring (for gate valve type)
K9319RN Perfluoro-elastomer O-ring (for all types)
T06.EPS

All Rights Reserved. Copyright © 2000, Yokogawa Electric Corporation GS 12D08G02-E 8th Edition Oct.08, 2010-00
<<Contents>> <<Index>> 9
■ DIMENSIONS
1. SC4AJ
Sensor SC4AJ-u-AD-09 Sensor SC4AJ-u-AD-15

Unit : mm Unit : mm
\19.05

152

\19.05
90

Pin-type Ring-type
Cable length (3m, 5m, 10m, 15m, 20m)
Approx. 350 Pin-type Ring-type
Cable length (3m, 5m, 10m, 15m, 20m)

Approx. 350

F12.EPS

F13.EPS

Option for adapter mounting type (-AD)

Unit : mm
Approx. 49

3/4NPT
or R3/4 *

* /PS or /PF : 3/4NPT

/RS or /RF : R3/4
F14.EPS

Sensor SC4AJ-S-SA-NN Option for welding socket type (-SA)

Unit : mm /SA1 /SA2

\19.05

O-ring Unit : mm
\24.9
\33.8
\38

95 5
130.5
Approx. 185
Pin-type Ring-type
Cable length (3m, 5m, 10m, 15m, 20m)
Approx. 350

51
158
8.5
Socket 8.5
et
55 thickness Sock ess
n
(56.3

F15.EPS
thick
)

f42 f42

(43.5) F16.EPS

All Rights Reserved. Copyright © 2000, Yokogawa Electric Corporation GS 12D08G02-E 8th Edition Oct.08, 2010-00
<<Contents>> <<Index>> 10
Sensor SC4AJ-S-SB-NN

Unit : mm Option for 1 or 1.5 inch welding clamp type (-SB)

\50.5

\19.05

Unit : mm
/SB1

70 6.35

12.7
89.7
Approx. 150
Pin-type Ring-type
Cable length (3m, 5m, 10m, 15m, 20m) φ25.4

Approx. 350

/SB2

F17.EPS

12.7
φ38.1
F18.EPS

Sensor SC4AJ-S-SC-NN

Unit : mm
\19.05
\64

Option for welding clamp type (-SC)

/SC1 Unit : mm
80 6.35
115.7
Approx. 170
Pin-type Ring-type
12.7

Cable length (3m, 5m, 10m, 15m, 20m)

Approx. 350
φ50.8

F20.EPS

F19.EPS

All Rights Reserved. Copyright © 2000, Yokogawa Electric Corporation GS 12D08G02-E 8th Edition Oct.08, 2010-00
<<Contents>> <<Index>> 11
2. SC8SG
Screw-in Model (with welding socket)
Unit : mm

Pin terminals
Unit : mm

Pin terminals Locknuts

(M48 x 2) Fork terminals
Approx.78
Locknuts
(M48 x 2) Fork terminals
Approx.78
Welding socket
Ring terminals
Outlet for
Welding socket measured solution
Ring terminals
Outlet for
measured solution
221
192 185
156

95 125

f30
f30

Electrode with 0.01cm-1 Cell constant

(two-electrode system) Electrode with 10 cm-1 Cell constant
(two-electrode system)

Unit : mm

Pin terminals

Locknuts
(M48 x 2) Fork terminals
Approx.78 Welding socket for Screw-in type (K9208BK)

Welding socket Unit : mm

Ring terminals
C1 f55
Outlet for
measured solution

3 22 27
221
185
3
C1 (5)
125 f42
f45
f50 60.2 Material: SUS316
f30 (Note) If you make the welding socket for screw-in type,
refer to the above drawing.

Electrode with 10 cm-1 Cell constant

(Four-electrode system)

All Rights Reserved. Copyright © 2000, Yokogawa Electric Corporation GS 12D08G02-E 8th Edition Oct.08, 2010-00
<<Contents>> <<Index>> 12
Flow-through type (Chamber Material: PP) + Mounting bracket (/PS) --Screw Jointed--

Unit : mm

Pin terminals

Fork terminals
Approx. 78

Mounting hardware
Option : /PS
Rc 1/2
Ring terminals
1/2NPT

40
203 87 99 50A pipe
305 (O.D. f60.5)
170

217

47 Rc 1/2 53

100
1/2NPT

Flow-through type (Chamber Material: PP) + Mounting bracket (/PS) --Flange Jointed--

Unit : mm

Pin terminals

Fork terminals
Approx. 78

4 - f15 holes
12 Mounting hardware
Option : /PS
Ring terminals

fC

fD

203 303 85 99 50A pipe

215

47

98
100

Flange rating fC fD
JIS 10K 15 FF 70 95
ANSI Class150 1/2 FF 60.5 88.9

All Rights Reserved. Copyright © 2000, Yokogawa Electric Corporation GS 12D08G02-E 8th Edition Oct.08, 2010-00
<<Contents>> <<Index>> 13
Flow-through type (Chamber Material: SCS14) --Screw Jointed--
Unit : mm

Pin terminals

Approx. 78
Fork terminals
Locknuts

Ring terminals

Rc1/2 or
1/2NPT(F)

Flow-through type (Chamber Material: SCS14) --Flange Jointed--

42
260
Unit : mm

172
Pin terminals

Fork terminals
Approx. f58 Rc1/2 or
1/2NPT(F)
Approx. 78

4 - fh holes fG
Ring terminals
fC

fD
293
t

Flange rating fC fD fG fh t 205 75

JIS 10K 15 RF 70 95 52 15 12
ANSI Class150 1/2 RF 60.5 88.9 34.9 15.7 11.2
(with serration)

Mounting hardware for flow-through type SCS14 chamber (option: /SS)

Unit : mm
(Chamber of Conductivity detector)
approx. 101.8 50A pipe
(provided by the user)

20

55

203

70
100

All Rights Reserved. Copyright © 2000, Yokogawa Electric Corporation GS 12D08G02-E 8th Edition Oct.08, 2010-00
<<Contents>> <<Index>> 14
3. WU41 for SC8SG
Unit : mm

100
64.5 PG9 Approx. Pin terminal

White
Brown
Green

\ 29
Yellow
Black
Red
Cable lengh: 5.5 m, 10 m, 20 m

15 Fork terminal Ring terminal

16
14

13
11
12 Earth
WU41e.eps

4. SC210G
Screw-in Type Flange Type
Clearance for maintenance access Unit : mm

91 82
H + 50
Unit : mm
Clearance for maintenance access
91 82
H + 60

G 1/2
Approx. Cable inlet
4 - f19 hole H + 172

G 1/2 t
Cable inlet
Mounting screw fC
R1-1/2 or 1-1/2NPT fD
Gage diameter H
Approx.
H + 184

Approx.
H H + 10 f30 26 28

SC210G-B SC210G-A
Sensor length code H
- L015 162
Flange rating fC fD t
- L030 312
f30 26 28 JIS 10K 50 RF 120 155 16
- L050 512
ANSI Class150 2 RF 120.7 152.4 19.1
- L100 1012
SC210G-B SC210G-A Sensor length : H = 150, 300, 500, 1000, 1500, 2000 JPI Class150 2 RF 120.6 152 19.5
- L150 1512
Note : ANSI flange with serrations.
- L200 2012

Flow-through Type Flow-through type + Mounting hardware (/PS)

(screw connection, Chanber material: SCS14) (screw connection, chamber material: polypropylene)
Unit : mm
Clearance for maintenance access
Unit : mm
Clearance for maintenance access 91 82
210
91 82
210

G 1/2
Cable inlet
G 1/2
Cable inlet 100
Rc1/2 1/2NPT

Rc1/2 or 1/2 NPT Mounting Approx.

Approx. Hardware Outlet
Outlet 372
374 Option /PS

40 47 170
42

172 f58
58
Rc1/2
47
1/2NPT
Rc1/2 or 1/2 NPT 99 Inlet
JIS 50A pipe (O.D. f60.5)
Inlet
Upright/horizontal position

All Rights Reserved. Copyright © 2000, Yokogawa Electric Corporation GS 12D08G02-E 8th Edition Oct.08, 2010-00
<<Contents>> <<Index>> 15
Flow-through type + Mounting hardware (/PS) Flow-though type
(screw connection, chamber material: polypropylene) (screw connection, chamber material: SCS14)
Clearance for maintenance access Unit : mm
Unit : mm
Clearance for maintenance access
91 82
91 82 210
210

G 1/2
G 1/2 Cable inlet
t
t Cable inlet
Approx. 100
419
Mounting Approx.
Hardware 4 - fh fD fC 409 Outlet
Outlet
Option /PS fD fC

4 - fh
75 205 f58
91
215

58

Inlet
Inlet
91 JIS 50A pipe (O.D. f60.5) Fange rating fC fD t fh
Upright/horizontal position JIS 10K 15 RF 70 95 12 15
Flange rating fC fD t fh ANSI Class150 1/2 RF 60.5 88.9 11.2 15.7
JIS 10K 15 FF 70 95 12 15 JPI Class150 1/2 RF 60.3 89 10.9 16
ANSI Class150 1/2 FF 60.5 88.9 12 15
(Note) ANSI flange is serration.

Screw-in type with gate valve

SC210G-A SC210G-B
Unit : mm Clearance for maintenance access Unit : mm
Clearance for maintenance access
91 82
91 82 255
210

G 1/2
G 1/2
Cable inlet
Cable inlet
264

410
123

Mounting screw
R1-1/4 or 1-1/4NPT Gage diameter 123
155

89
Mounting screw
R1-1/4 or 1-1/4NPT
28 26 Gage diameter

199

Mounting hardware for flow-through type SCS14 chamber 133

(option: /SS)
Unit : mm
(Chamber of Conductivity detector) Ø30
approx. 101.8 50A pipe
(provided by the user)

20
"/ANSI"Adaptor of cable inlet
55 45
26
f15

1/2NPT
203
G1/2

70
100

All Rights Reserved. Copyright © 2000, Yokogawa Electric Corporation GS 12D08G02-E 8th Edition Oct.08, 2010-00
<<Contents>> <<Index>> 16
■ WIRING DIAGRAM

11 11
Temperature Temperature
12 12
13 13
14 14
Electrode Electrode
15 15
16 16

SC4AJ Conductivity Sensor SC8SG Conductivity Detector

(two-electrode system) (two-electrode system, four-electrode system)
Applicable Converter / Transmitter: Applicable Converter / Transmitter:
SC450G, FLXA21, SC202G, SC202SJ SC450G, FLXA21, SC202G, SC202SJ
For SC100, see SD12D11A01-01E.

11
Temperature
12
13
14
Electrode
15
16

SC210G Conductivity Detector

(two-electrode system)
Applicable Converter / Transmitter:
SC450G, FLXA21, SC202G, SC202SJ
F11.EPS

All Rights Reserved. Copyright © 2000, Yokogawa Electric Corporation GS 12D08G02-E 8th Edition Sep.26, 2011-00
<<Contents>> <<Index>> 17
■ TABLE OF CORROSION-RESISTANT MATERIALS
Note: This table shows corrosion resistances against each specified chemical only. If two or more kinds of chemical are
mixed in a sample, the properties may be different from those shown in this table.

Very suitable Example of Description

Suitable Concentration Temperature Judgement
Slightly unsuitable % ˚C
Unusable
Seal
Holder material Electrode material O-ring material
Polypropylene SUS316 Epoxy resin PVDF Viton
Hydrochloric acid 5 20 5 30 5 30 5 30
80 10 60 1 b
Hypohlorous acid 10 20 14 30 15 30 20 40
Inorganic acids

40
Nitric acid 10 20 10 30 10 30 10 100 Strong acid
80 25 60 Weak acid
Sulfuric acid 3 20 5 30 5 20 5 30
3 100 5 100 10 60 5 100
Phosphoric acid 30 60 15 30 5 30 5 30
30 100 5 b 25 100 5 60
Ammonia water 15 80 10 b 10 b 10 b
15 100 28 65 28 65 28 65
Caustic potash 10 b 10 60 10 b
25 b 25 b 25 b
Alkali

Strong alkali
Caustic soda 20 80 20 30 20 60 20 30
Weak alkali
20 100 20 b 20 b 20 b
Potassium carbonate 5 b 5 b 5 b
35 b 35 b 35 b
Sodium carbonate sat. 100 25 b 25 b 25 b
Zinc chloride 20 b 20 60 20 b
Aluminum chloride 25 25 10 b
25 25 25 b
Ammonium chloride 35 40 25 b 25 20 25 b
Potassium chloride sat. 60 sat. 60 sat. 60
Chlorides

Calcium chloride sat. 80 25 b 25 b 25 b

sat. 100
Ferric chloride 20 40 30 b 30 60 30 b
60 100
Sodium chloride 20% + C12 100 90 90 90
(saturated) (Electrolyte)
Sea water 24 24 60 24
Ammonium sulfate 5 60 20 b 20 b 20 b
trates Sulfates

sat. 30 sat. 30 sat. 30

Potassium sulfatc 10 b 10 b 10 b
Sodium sulfate 20 b 20 b 20 b
Ammonium nitrate Good corrosion 20 b 20 b 20 b
Ni-

resistance against
Sodium nitrate 50 b 50 b 50 b
all salts normally
Sodium sulfite used 20 b 20 b
Hydrogen peroxide 10 30 10 30 10 30
Sodium hypochlorite 10 90 2 60 to 90 2 60 to 90 15 30
20 80
Others

Potassium bichromate 10 b 10 20 10 b
Alcohol 96 70 100 b 80 60 80 100
Acetic acid 100 70 100 70 10 60 10 100
Phenol 100 20 95 30 100 20 100 20
Aromatic solvent 100 20 100 25 100 20 100
(Note) b: Shows temperatures up to the boiling point. PVDF: Polyvinylidene difluoride
T09.eps
CAUTION
Select the material of wetted parts with careful consideration of process characteristics. Inappropriate
selection may cause leakage of process fluids, which greatly affects facilities. Considerable care must be
taken particularly in the case of strongly corrosive process fluid such as hydrochloric acid, sulfuric acid,
hydrogen sulfide, and sodium hypochlorite. If you have any questions about the wetted part construction
of the product, be sure to contact Yokogawa.

All Rights Reserved. Copyright © 2000, Yokogawa Electric Corporation GS 12D08G02-E 8th Edition Oct.08, 2010-00
<<Contents>> <<Index>> 18

Conductivity Detectors/Sensors Inquiry Specifications

■ ) and write
Thank you for inquiry about YOKOGAWA Conductivity Detector/Sensor. Please check (✔) the appropriate box (■
down the relevant information in the underlined blanks.

1. General Items
Name of your company:
Person in charge : Belongs to: (Phone No.: )
Name of plant :
Measuring point :
Purpose of use : ■ Indication ■ Record ■ Alarm ■ Control
Power supply : V AC, Hz

2. Measuring Conditions
(1) Liquid temperature : to , Normal [˚C]
(2) Liquid pressure : to , Normal [kPa]
(3) Flow rate : to , Normal [l/min.]
(4) Flow speed : to , Normal [m/s]
(5) Slurry or fouling components: ■ No ■ Yes
(6) Name of measuring liquid :
(7) Component of measuring liquid :
(8) Others :

3. Installing Location
(1) Ambient temperature :
(2) Installing location : ■ Outdoors ■ Indoors
(3) Others :

4. Specification Requirements
(1) Measuring Range :
(2) Transmission output : ■ 4 to 20 mA DC ■ 0 to 20 mA DC
(3) Detector/Sensor : SC4AJ ■ 2-electrode system (0.02 cm-1) ■ 2-electrode system (0.1 cm-1)
SC8SG ■ 2-electrode system (0.01 cm-1) ■ 2-electrode system (10 cm-1)
■ 4-electrode system (10 cm-1)
SC210G ■ 2-electrode system (0.05 cm-1) ■ 2-electrode system (5 cm-1)
(4) Mounting type : SC4AJ ■ Adapter mounting ■ Welding socket ■ Welding clamp
SC8SG ■ Screw-in ■ Flow-through
SC210G ■ Screw-in ■ Flange ■ Flow-through
■ Screw-in with gate valve
(5) Cable length : SC4AJ ■3m ■5m ■ 10 m ■ 15 m ■ 20 m
SC8SG ■ 5.5 m ■ 10 m ■ 20 m
SC210G ■ 3 m ■5m ■ 10 m ■ 15 m ■ 20 m
(6) Dedicated cable for SC8SG : WU41 ■ 5.5 m ■ 10 m ■ 20 m

(7) Others :

All Rights Reserved. Copyright © 2000, Yokogawa Electric Corporation GS 12D08G02-E 8th Edition Oct.08, 2010-00
Subject to change without notice