Scribd
Upload
8 views

SAP Related Network Troubleshooting Commands

The document provides an overview of essential network troubleshooting commands for Windows and UNIX systems, highlighting their importance for network administrators and IT professionals. Key commands include PING for checking connectivity, IPCONFIG for displaying IP configuration, and NSLOOKUP for querying DNS records. Additional commands like NETSTAT, TRACERT, and ROUTE are also mentioned for diagnosing various network issues.

Uploaded by

Aaliya Samreen
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
8 views

SAP Related Network Troubleshooting Commands

The document provides an overview of essential network troubleshooting commands for Windows and UNIX systems, highlighting their importance for network administrators and IT professionals. Key commands include PING for checking connectivity, IPCONFIG for displaying IP configuration, and NSLOOKUP for querying DNS records. Additional commands like NETSTAT, TRACERT, and ROUTE are also mentioned for diagnosing various network issues.

Uploaded by

Aaliya Samreen
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

SAP Related Network Troubleshooting

Commands
Troubleshooting computer network is one of the most important job description for network
administrators, system administrators, network technicians and IT consultants. A computer network
may have different types of problems as being infected with viruses and spyware, hacker attacks, can
access by unauthorized users and may Connectivity problems due to failure of the faulty network
devices or configurations face. The following is a list of basic network troubleshooting commands that
are built into the Windows-based operating systems and UNIX etc. The right use of these commands
can troubleshooting helps a lot in the diagnosis and solution of problems with your computer network.

PING
Ping is the most important troubleshooting command and checks the connectivity with other
computers. For example, your system’s IP address is 10.10.10.10 and your network server’s IP address
is 10.10.10.1 and you can check the connection to the server by using the ping command in the
following format.
At DOS command prompt, type ping 10.10.10.1 and press Enter
When you receive the response from the server then the connectivity is ok and if you get the error
message like this means to get “Request time out” so that there is a problem in connecting to the
server.
IPCONFIG
IPconfig is another important command in Windows. It shows the IP address of the computer and it
shows the DNS, DHCP, Gateway addresses the network and subnet mask.
At DOS prompt type ipconfig and press Enter to see the IP address of your computer.
inconfig In DOS prompt / all and press Enter to display the detailed information.
NSLOOKUP
NSLOOKUP is a TCP / IP-based command and checks domain name aliases, DNS records,
information on the operating system by query the Internet domain name server. You can correct the
error with the DNS server on your network
HOST NAME
Hostname command shows you the name of the computer.
At DOS prompt hostname and press Enter
NETSTAT
NETSTAT utility shows a statistical protocols and the current established TCP / IP connections to the
computer.
NBTSTAT
NBTSTAT helps to resolve the NetBIOS name resolution problems.
ARP displays and modifies IP Physical address translation table that is used by the ARP protocols.
FINGER
Finger command is used to retrieve information about a user on a network.
TRACERT
Tracert command is used to determine the path of the remote system. This tool also provides the
number of hops and the IP address of each hop. For example, if you see how many hops (routers) are
involved to achieve, www.yahoo.com, and what the IP address of each hop is then to use the following
command.
At the command prompt, type tracert www.yahoo.com you a list of all the hops and their IP addresses
to see.
TRACE ROUTE
Traceroute is a very useful network debugging command and it is in the search for the server slows
down the transmission on the Internet and it also shows the distance between the two systems are
used.
ROUTE
Route command, you can manually make entries in the routing table.
Hopefully, the above commands will help you diagnose the troubleshooting computer networking
problems.

You might also like