Scribd
Upload
14 views

Technical Data Sheet

The document provides detailed specifications for the Fixanchor W-FAZ mechanical anchors, including installation types, load capacities for various thread sizes, and minimum edge distances. It outlines the tensile and shear loads for both non-cracked and cracked concrete, along with necessary installation parameters such as drill depth and torque. Additionally, it lists approvals and certifications relevant to the anchors.

Uploaded by

saryemad1
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
14 views

Technical Data Sheet

The document provides detailed specifications for the Fixanchor W-FAZ mechanical anchors, including installation types, load capacities for various thread sizes, and minimum edge distances. It outlines the tensile and shear loads for both non-cracked and cracked concrete, along with necessary installation parameters such as drill depth and torque. Additionally, it lists approvals and certifications relevant to the anchors.

Uploaded by

saryemad1
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Mechanical anchors

Fixanchor W-FAZ

Approvals and certificates

Type of installation
Pre-positioned In-place Stand-off
– ✓ ✓

Application references

Installation

Loads
Thread size M8 M10 M12 M16 M20 M24 M27
Effective anchorage depth hef [mm] 35 46 40 60 50 70 65 85 100 115 125 125
Non-cracked Concrete
W-FAZ/S 3.6 5.7 4.3 7.6 8.3 11.9 12.3 16.7 23.4 28.9 – 32.7
Tensile Nrec [kN]
W-FAZ/A4 3.6 5.7 4.3 7.6 8.3 11.9 12.3 16.7 23.4 – 32.7 –
W-FAZ/S 7.0 7.0 11.5 11.5 17.1 17.1 29.5 31.4 37.1 65.1 – 91.7
Shear Vrec [kN]
W-FAZ/A4 7.4 7.4 11.4 11.4 17.1 17.1 29.5 31.4 43.9 – 70.6 –
Minimum edge W-FAZ/S 50 100 – 180
cmin [mm] 40 50 65 100 75 170 80 130
­distance W-FAZ/A4 60 –
Cracked concrete
W-FAZ/S 2.4 2.4 3.6 4.3 5.8 7.6 8.6 11.9 16.4 20.2 – 22.9
Tensile Nrec [kN]
W-FAZ/A4 2.4 2.4 3.6 4.3 5.8 7.6 8.6 11.9 16.4 – 19.0 –
W-FAZ/S 7.0 7.0 10.0 11.5 13.9 17.1 20.6 30.8 37.1 56.6 – 64.2
Shear Vrec [kN]
W-FAZ/A4 7.4 7.4 10.0 11.4 13.9 17.1 20.6 30.8 43.9 – 64.2 –
Minimum edge W-FAZ/S 45 100 – 180
cmin [mm] 40 40 65 65 60 100 60 95
­distance W-FAZ/A4 55 – 125 –
1)
Loads are valid for single anchors. Normal spaced reinforcement in ≥ C20/25. Material safety factor γM and safety factor for action γL = 1.4 are included. The material safety factor depends on the failure mode.
2)
Loads for anchorages close to edge and/or with small spacing have to be reduced and should be calculated based on performance data given in the ETA.

Clearance-hole in fixture df [mm] 9 12 14 18 22 26 30


Drill depth h1 [mm] 49 60 55 75 70 90 90 110 125 145 155 160
Minimum thickness of
hmin [mm] 80 100 80 120 100 140 140 170/160 200 230 250 250
concrete member

Construction fixings 55
Mechanical anchors

Fixanchor W-FAZ
Anchor Fixture Art. no. Drill Drill hole Installation Wrench Approval Thread P.
length ­thickness for hole depth for torque Size length Qty.
hef,std hef,red dia- through
meter installa-
l tfix Carbon steel Carbon steel Stainless steel High corr. tion
resist.
Type [mm] [mm] [mm] galvanized sherardized A4 HCR do h2 Tinst ≤ SW ETA- Sesimic Mxl [qty.]
[mm] [mm] [Nm] [mm] 99/0011 C1/C2 [mm]

W-FAZ

65 0 11 5928 258 011 – 5928 458 011 5928 658 011 60 ✓ – M8x22

75 10 21 5928 208 010 – 5928 408 010 5928 608 010 70 ✓ C1+C2 M8x32

80 15 26 5928 208 015 – 5929 408 015 5928 608 015 75 ✓ C1+C2 M8x37 100
M8 8 20 20 13
95 30 41 5928 208 030 – 5930 408 030 5928 608 030 90 ✓ C1+C2 M8x52

115 50 61 5928 208 050 – 5931 408 050 5928 608 050 110 ✓ C1+C2 M8x72

165 100 111 5928 208 100 – 5932 408 100 – 160 ✓ C1+C2 M8x122 50

70 0 10 5928 251 010 – 5928 451 010 5928 651 010 75 ✓ – M10x22

80 0 20 5928 251 020 – 5928 451 020 – 75 ✓ – M10x32

90 10 30 5928 210 010 5928 710 010 5928 410 010 5928 610 010 85 ✓ C1+C2 M10x42

95 15 35 5928 210 015 5928 710 015 5928 410 015 5928 610 015 90 ✓ C1+C2 M10x47

100 20 40 5928 210 020 5928 710 020 5928 410 020 – 95 ✓ C1+C2 M10x52 50
M10 10 25 35 17
110 30 50 5928 210 030 5928 710 030 5928 210 030 5928 610 030 105 ✓ C1+C2 M10x62

130 50 70 5928 210 050 5928 710 050 5928 410 050 5928 610 050 125 ✓ C1+C2 M10x82

155 75 95 5928 210 075 5928 710 075 5928 410 075 – 145 ✓ C1+C2 M10x107

180 100 120 5928 210 100 – 5928 410 100 – 175 ✓ C1+C2 M10x132

230 150 – 0904 521 005 – – – 225 ✓ – M10x80 25

85 0 10 5928 252 010 – 5928 452 010 5928 652 010 90 ✓ – M12x26

95 0 20 5928 252 020 – 5928 452 020 – 90 ✓ – M12x36

110 15 35 5928 212 015 5928 712 015 5928 412 015 5928 612 015 105 ✓ C1+C2 M12x51

115 20 40 5928 212 020 5928 712 020 5928 412 020 5928 612 020 110 ✓ C1+C2 M12x56
25
125 30 50 5928 212 030 – 5928 412 030 5928 612 030 120 ✓ C1+C2 M12x66

145 50 70 5928 212 050 5928 712 050 5928 412 050 5928 612 050 140 ✓ C1+C2 M12x86

160 65 85 5928 212 065 5928 712 065 5928 412 065 – 155 ✓ C1+C2 M12x101

180 85 105 5928 212 085 5928 712 085 5928 412 085 – 175 ✓ C1+C2 M12x121
M12 12 45 50 19
200 105 125 5928 212 105 5928 712 105 5928 412 105 – 195 ✓ C1+C2 M12x141
25
220 125 – 0904 521 217 – 0904 621 206 – 215 ✓ – M12x80

240 145 – 0904 521 218 – – – 235 ✓ – M12x80

255 160 – 0904 521 219 – 0904 621 207 – 250 ✓ – M12x80

275 180 – – – 0904 621 208 – 270 ✓ – M12x80


20
285 190 – – 5928 712 190 0904 621 209 – 280 ✓ – M12x80

300 205 – – – 0904 621 210 – 305 ✓ – M12x80

325 230 – – – 0904 621 211 – 320 ✓ – M12x80

56 Construction fixings
Mechanical anchors

Fixanchor W-FAZ
Anchor Fixture Art. no. Drill Drill hole Installation Wrench Approval Thread P.
length ­thickness for hole depth for torque Size length Qty.
hef,std hef,red dia- through
meter installa-
l tfix Carbon steel Carbon steel Stainless steel High corr. tion
resist.
Type [mm] [mm] [mm] galvanized sherardized A4 HCR do h2 Tinst ≤ SW ETA- Sesimic Mxl [qty.]
[mm] [mm] [Nm] [mm] 99/0011 C1/C2 [mm]
115 0 15 5928 256 015 – 5928 456 015 – 110 ✓ – M16x26

125 5 25 5928 216 005 – 5928 416 005 – 115 ✓ C1+C2 M16x36

135 15 35 5928 216 015 5928 716 015 5928 416 015 – 125 ✓ C1+C2 M16x56 20

145 25 45 5928 216 025 5928 716 025 5928 416 025 5928 616 025 135 ✓ C1+C2 M16x66

170 50 70 5928 216 050 5928 716 050 5928 416 050 5928 616 050 160 ✓ C1+C2 M16x91

200 80 100 5928 216 080 5928 716 080 5928 416 080 – 190 ✓ C1+C2 M16x121
M16 16 90 110 24
220 100 – 0904 521 603 5928 716 220 0904 616 100 5928 016 100 200 ✓ – M16x80

260 140 – 0904 521 604 5928 716 260 – – 250 ✓ – M16x80

280 160 – – – 0904 616 160 – 270 ✓ – M16x80 10

300 180 – 0904 521 605 5928 716 300 0904 616 180 – 290 ✓ – M16x80

325 205 – – – 0904 616 205 – 315 ✓ – M16x80

340 220 – – – 0904 616 220 – 330 ✓ – M16x80

165 30 – 5928 220 030 5928 720 030 5928 420 030 5928 620 030 155 ✓ C1+C2 M20x50
10
195 60 – 5928 220 060 5928 720 060 5928 420 060 – 185 ✓ C1+C2 M20x70
M20 20 160 200 30
265 130 – 0904 522 003 – 0904 620 130 – 255 ✓ – M20x80
5
285 150 – 0904 522 004 – 0904 620 150 – 275 ✓ – M20x80

190 30 – 0904 522 401 – – – 175 ✓ – M24x55


10
200 30 – – – 0904 624 030 – 185 ✓ – M24x58

220 60 – 0904 522 402 – – – 205 ✓ – M24x85

M24 230 60 – – – 0904 624 060 – 24 215 200 290 36 ✓ – M24x88

235 75 – 0904 522 403 – – – 220 ✓ – M24x100 5

245 75 – – – 0904 624 075 – 230 ✓ – M24x103

260 100 – 0904 522 404 – – – 245 ✓ – M24x125

210 30 – 0904 522 701 – – – 190 ✓ – M27x62

M27 240 60 – 0904 522 702 – – – 28 220 300 – 41 ✓ – M27x92 5

280 100 – 0904 522 703 – – – 260 ✓ – M27x132

Construction fixings 57
Mechanical anchors

Fixanchor W-FAZ
Anchor Fixture Art. no. Drill Drill hole Installation Wrench Approval Thread P.
length ­thickness for hole depth for torque Size length Qty.
hef,std hef,red dia- through
meter installa-
l tfix Carbon steel Carbon steel Stainless steel High corr. tion
resist.
Type [mm] [mm] [mm] galvanized sherardized A4 HCR do h2 Tinst ≤ SW ETA- Sesimic Mxl [qty.]
[mm] [mm] [Nm] [mm] 99/0011 C1/C2 [mm]
M8: 24 x 2
M10: 30 x 2,5
W-FAZ with big U-washer
M12: 27 x 3
M16: 50 x 3
75 10 21 5928 308 010 – 5928 508 010 – 8 70 ✓ C1+C2 M8x32

80 15 26 5928 308 015 – 5928 508 015 – 8 75 ✓ C1+C2 M8x37


M8 20 20 13 100
95 30 41 5928 308 030 – 5928 508 030 – 8 90 ✓ C1+C2 M8x52

115 50 61 – – 5928 508 050 – 8 110 ✓ C1+C2 M8x72

90 10 30 5928 310 010 – 5928 510 010 – 85 ✓ C1+C2 M10x42

95 15 35 5928 310 015 – 5928 510 015 – 90 ✓ C1+C2 M10x47

M10 110 30 50 5928 310 030 – 5928 510 030 – 10 105 25 35 17 ✓ C1+C2 M10x62 50

130 50 70 5928 310 050 – 5928 510 050 – 125 ✓ C1+C2 M10x82

180 100 120 5928 310 100 – – – 175 ✓ C1+C2 M10x132

110 15 35 5928 312 015 – 5928 512 015 – 105 ✓ C1+C2 M12x51

125 30 50 5928 312 030 – 5928 512 030 – 120 ✓ C1+C2 M12x66

145 50 70 5928 312 050 – 5928 512 050 – 12 140 45 50 19 ✓ C1+C2 M12x86 25

200 105 125 5928 312 105 – – – 195 ✓ C1+C2 M12x141

M12 220 125 – 0904 531 212 – – – 215 ✓ – M12x80

240 145 – 0904 531 213 – – – 235 ✓ – M12x80

255 160 – 0904 531 214 – 5928 112 005 – 250 ✓ – M12x80
12 45 50 19 20
285 190 – 0904 531 215 – – – 280 ✓ – M12x80

325 230 – 0904 531 216 – – – 320 ✓ – M12x80

145 25 45 5928 316 025 – 5928 516 025 – 135 ✓ C1+C2 M16x66
M16 16 90 110 24 20
170 50 70 5928 316 050 – – – 160 ✓ C1+C2 M16x91

Anchor Fixture Art. no. Drill Drill hole Installation Wrench Approval Thread P.
length ­thickness for hole depth for torque Size length Qty.
hef,std hef,red dia- through
meter installa-
l tfix Carbon steel Carbon steel Stainless steel High corr. tion
resist.
Type [mm] [mm] [mm] galvanized sherardized A4 HCR do h2 Tinst ≤ SW ETA- Sesimic Mxl [qty.]
[mm] [mm] [Nm] [mm] 99/0011 C1/C2 [mm]

M12: 44 x 4
W-FAZ with big U-washer DIN EN ISO 7094
M16: 56 x 5

200 105 125 5928 362 105 – – – 195 ✓ C1+C2 M12x80


25
220 125 – 0904 531 222 – – – 215 – – M12x80

M12 240 145 – 0904 531 223 – 12 235 45 – 19 – – M12x80

255 160 – 0904 531 224 – – – 250 – – M12x80 20

285 190 – 0904 531 225 – – – 280 – – M12x80

220 100 – 0904 531 622 – – – 210 – – M16x80

M16 260 140 – 0904 531 623 – – – 16 250 90 – 24 – – M16x80 10

300 180 – 0904 531 624 – – – 290 – – M16x80

58 Construction fixings

You might also like