Chapter 1- Typical Configuration of Computer System II PUC

Chapter-1

TYPICAL CONFIGURATION OF COMPUTER SYSTEM

Introduction:

“Computer is an electronic machine that can store, recall and process data. It can perform
tasks/jobs or complex calculation according to a set of instructions or programs.

The terms and definitions in the study of computer system are:

Hardware​: The physical parts of a computer system called as hardware. The hardware

components can be seen, touch and feel. Ex: Keyboard, Mouse, Monitor, RAM, CPU etc.

Software​: A Set or collection of programs is known as software. Example Operating System,

Data: ​Data is the raw information or basic facts that computer can process.

User(s): ​People who use the computers are called users.

Functional components of a computer:

A computer is designed using four basic units. They are:

1. Input Unit

2. Central Processing Unit(CPU)

Control Unit

Arithmetic and Logic Unit (ALU)

3. Memory Unit

4. Output Unit
Chapter 1- Typical Configuration of Computer System II PUC

Input Unit:

Computers need to receive data and instructions in order to solve a problem. The Input unit
performs this operation.

The Input Unit basically links the external world or environment to the computer system.

The input unit may consist of one or more input devices.

Central Processing Unit (CPU):

The function of the CPU is to interpret the instructions in the program and execute them one by
one. It consists of two major units.

1. Control Unit: ​It controls and directs the transfer of program instructions and data between
various units.
2. Arithmetic and Logic Unit (ALU): ​Arithmetic and Logic Unit performs arithmetic and
logical operations and controls the speed of these operations.

Memory Unit:

The results generated from processing have to be preserved before it is displayed.

The memory units thus provide space to store input data, intermediate results and the final
output generated.

Note​:​ The input unit, an output unit, and secondary storage devices are together known as
Peripheral Devices.

Output Unit:

It is used to print or display the results, which are stored in the memory unit. The actual
function of the output unit is just the reverse of the input unit.

Thus, the output unit links the computer to the outside world.
General Structure of CPU
It is also known as processor (or) microprocessor
● Central processing unit ( CPU )
● Brain of the computer
● The function of the CPU is to execute the instructions given to it and to produce the results
● Bus is a communication pathology

Three important points of computer:

1) Instruction fetch
 2) Instruction decode
3) Instruction execution

1) Instruction fetch :
One instruction (or) statement at a time from the memory to the CPU for execution
2) Instruction decode :
The operation to be performed by the instruction
3) Instruction execution :
After the instruction is decoded then it can be executed to perform its required task and the
output generated can be stored
Different components inside the CPU:
A) PC ( or ) IP​:
Program counter (or) instruction pointer - keep track of memory address where the next
instruction is to be executed is stored
B) Memory address register ( MAR ):
It specifies the memory address, where instruction can be found
C) Memory data register ( MDR ):
Act as an interface between CPU and memory
D) Instruction register ( IR ):
It contains instructions until it can be decoded
E) Instruction decoded ( ID ):
It decodes the instructions
F) Timing and control unit ( TCU ):
To generate internal and external signals for carrying out the execution of the instruction
G) Arithmetic and logic unit ( or ) ALU:
Performs all arithmetic operations such as addition, subtraction, multiply and logic
operations
H) Accumulator:
Stores values and increments of intermediate arithmetic and logic calculations
I) General register:
To store intermediate instructions
J) Bus:
To establish communication pathology between two or more devices
There are 3 types:
● Data bus
● Address bus
● Control bus

Data bus: it carries data or a word

Address bus: it carries address of memory
Control bus: it contains signals between the units of the computer

Motherboard:

The motherboard is a (PCB)main circuit board of the computer, which contains the CPU,
memory, expansions slots, bus, video controller and other electronic components.
∙ It is a large Printed Circuit Board (PCB). Important

3 Marks

Characteristics of Motherboard:
The motherboard may be characterized by the form factor, chipset and type of processor socket
used.

Form factor ​refers to the motherboard’s geometry, dimensions, arrangement and electrical
requirements.

Chipset ​controls the majority of resources of the computer. The function of chipset is to
coordinate data transfer between the various components of the computer.
Chapter 1- Typical Configuration of Computer System II PUC

The ​processor socket may be a rectangular connector into which the processor is mounted
vertically, or a square shaped connector with many small connectors into which the processor
is directly inserted.

Types of Motherboard:
There are four different types in motherboard:

XT Motherboards:

o XT stands for ​Extended Technology​.

o These are old model motherboards. In this we find old model processor socket like LIF (Low
Insertion Force) sockets, RAM slots: DIMM (Dual Inline Memory Modules) and ISA

(Industry Standards Architecture) slots, 12 pin power connector. They have slot type
processors and no ports.
o Ex: Pentium-I, Pentium-MMX, Pentium-II and Pentium-Pro.

AT Motherboards:

o AT stands for ​Advanced Technology​.

o AT Motherboards have PGA (Pin Grid Array) socket, SD RAM slots, 20 pin power connector
PCI slots and ISA slots.

o Full AT is 12” wide X 13.8” deep. AT has 5-pin large keyboard connector.

o Ex: Pentium-III Processors.

Baby AT Motherboards:

o Baby AT motherboards have the combination of ​XT and AT​.

o It was the first PC motherboard to build in sockets for I/O ports, which were cabled to
connectors on the back of the case.

o Ex: Pentium-III and Pentium-IV

ATX Motherboards:

o ATX motherboard stands for ​Advanced Technology Extended​ Motherboard.

o Latest Motherboard all are called as ATX motherboard, designed by ATX form factor.

o In this motherboard, MPGA Processor sockets, DDRRAM Slots, AGP Slots, SATA

Connectors, 20 pin and 24 pin ATX power connector and ports

o It is a full size board measuring 12” wide by 9.6” deep. Micro ATX is a small motherboard

size of 9.6” X 9.6”.

o Ex: Pentium-IV, Dual Core, Core 2 Duo, Quad Core, i3, i5 and i7.
 Chapter 1- Typical Configuration o f Computer System II
PUC

General Structure of Motherboard

The primary function of the processor is to execute

the instructions given to it & produce the results.

It fetches instructions and data from the primary memory and performs the required operations.

North Bridge ​and​ South B ridge ​are two chips in core logic chipset on PC motherboard.

North Bridge ​or north chipset ​is responsible for control of high speed components like CPU,
RAM, Chipset, BUS speed control and switch control data, ensurin g data back and forth
between the components in a smooth and continuous, fully exploit the speed of the CPU and
RAM.

South Bridge ​or​ south chipset ​is similar as north chipset, but the south bridge driver chipset
components slower as: Sound Card, Net Card, hard disk, etc.

Components of Motherboard:
The motherboard components are:

o Processors (CPU) o Disk Controllers

o BIOS Important o I/O Ports and
Interfaces
o CMOS o BUS
3 Marks

o Slots

Processors (CPU):

The processors or CPU is the main component on the motherboard and is called the brain of
the computer.
Chapter 1- Typical Configuration of Computer System II PUC

CPU consists of 1) ALU 2) CU 3) Registers

Arithmetic and logic unit performs all the arithmetic and logic operations on data.

CU is responsible for organizing the processing of data and instructions.

Registers is a temporary storage areas for holding data and instructions.

Note:

Clock Speed​:​ ​A measure of a processor’s operating speed, currently measured in MHz

(Megahertz) and GHz (Gigahertz).

A CPU’s performance is measured by the number of instructions executed per second i.e.

MIPS & BIPS

Microprocessor​:​ ​It is an electronic component. It is a single integrated circuit (IC) Chip.

This tiny chip contains the entire computation engine. Example: Intel, AMD, Celeron.

BIOS (Basic Input Output System):

BIOS is a small chip on the motherboard that holds a set of instructions to load the hardware
settings required like keyboard, monitors or disk drives.

The BIOS runs when the computer is switched ON.

POST ( Power On Self Test)

It checks if the hardware devices are present and functioning properly.

BIOS include the ​bootstrap loader​ to load the OS into memory.

CMOS (Complementary Metal Oxide Semiconductor):

It is a type of memory chip to store date, time and system setup parameters.

These parameters are loaded every time the computer is started.

BIOS & CMOS are kept powered by a small ​lithium Ion battery​ located on motherboard.

Slots:

Slot​: A slot is an opening space in a computer where we can insert a printed circuit board.

Slots are often called expansion slots.

There are several types of slots are:

ISA (Industry Standard Architecture):

o ISA slot is used to connect modem and input devices.

PCI (Peripheral Component Interconnect):

o PCI slots are used to connect graphics accelerators cards, sound card, internal modems

or SCSI cards.

o They are much faster than ISA cards.

Chapter 1- Typical Configuration of Computer System II PUC

AGP (Accelerated Graphic Port):

o AGP slot is an advanced port designed for video cards and 3D accelerators.

RAM Slot:

o RAM slot is used to install memory to store programs and data currently being used by
CPU.

o RAM is measured in units called bytes.

o Two types of RAM slot

SIMM (Single Inline Memory Module)

DIMM ( Dual Inline Memory Module)

Processor Slot:

o Processor slot is used to insert the processor chip which is the largest chip on the
motherboard.

Disk Controllers:

A device that connects a disk drive to the computer’s bus enabling the drive to exchange
data with other device.
Hard Disk Controller (HDC)

o The HDC is the interface that enables the computer to read and write information to the
hard disk drive.

o This connector is used to insert an Integrated Digital Electronics (IDE) cable.

o IDE cables connect devices such as hard drives, CD drives and DVD drives.

Floppy Disk Controller (FDC)

o FDC is the interface that directs and controls reading from and writing to computer

floppy disk drive.

o FDC usually performs data transmission in Direct Memory Access (DMA) mode.

I/O Ports and Interfaces:

Port​:​ ​A port is a socket on the computer used to connect external device to the computer.

It is used to connect external device like printer, keyboard or scanner.

The different types of I-O ports are Serial port, Parallel port, USB port and VGA port.

Serial Port:

o Serial Port, also known as communication port or Rs-232 c ports, is used for connecting
communication devices like mouse and modem.

o They are used for connecting communication devices like mouse, modem.

o This port transfers data serially one bit at a time.

Chapter 1- Typical Configuration of Computer System II PUC

o One main advantage is that data is sent and received over only two lines.

Parallel Port:

o Parallel ports are used to connect external input/output devices like printers or scanners.

o Also known as printer port

Important
o They carry 8 bit (one byte) at a time.
3 Marks

USB port :

o USB (Universal Serial BUS) port is used to connect a variety of newer peripherals like

printers, scanners, digital cameras, web cameras, speakers, etc. to a computer.

o USB port gives a single, standardized, easy-to-use way to connect a variety of newer
peripherals to a computer.

o USB is a plug-and-play interface between a computer and add-on devices such as

audio players, modem, scanner etc.

o With USB, a new device can be added to your computer without adding a adapter

card or even turning the computer off

o USB supports a data speed of 12 megabits per second

o USB supporting up to 127 devices.

PS-2 (Personal System) port:

o PS-2 port was developed by IBM to interface keyboards and pointing devices like
mouse, trackballs and touch pads.

IDE (Integrated Digital Electronics) port ​:

o It connects IDE devices like CD-ROM drives or hard disk drives to the motherboard.

AGP (Accelerated Graphics Port) port:

o It is used to connect to graphic card that provides high-speed video performance

typically required in games and other multimedia applications.

VGA (Visual Graphics Adaptor) port: ​It connects monitor to a​ ​computer’s video card.
Modem (Modulator demodulator)
connects a PC to the telephone
network.

Ethernet port ​connects to a network

and high speed Internet. It connects
network cable to a computer.

MIDI (Musical Instrument Digital

Interface) ​port is a system designed to

transmit information between electronic musical instruments.

Chapter 1- Typical Configuration o f Computer System II PUC

Bus:

∙​ A bus is a collection of parallel wires that form a pathway to carry address, data and control

signal.
Important
The functional features of bus are:

o A bus is a set of wire and each wire 3 Marks

can carry one bit of data.

o A bus width is defi ned by the

number of wires in the bus

A computer bus can be divided into two memory & I/O.

types

o Internal Bus:

It connects major computer

components like processor,

It is also called as system

bus.

o External Bus:

It connects the different external devices peripheral, expansion slots, I/O ports
to the rest of the computer.

It is also called the expansion bus and is slower than the system (internal) bus.

A system bus or expansion bus comprise of three kinds of buses:

 Data Bus​:

o It provides a path to transfer data between CPU and memory.

o The data bus may consists of 32, 64, 128 lines of wire.

Address Bus​:

o It connects CPU & RAM with a set of lines similar to data bus.

o The address bus width determines the maximum number o f memory location the
computer can address.

Control Bus​:

o It is used to control the access to and the use of the data and address lines.

8 | ​P a g e
Chapter 1- Typical Configuration of Computer System II PUC

Memory:

A computer memory refers to the electronic storing space for instructions and data.

Two kinds of memory are commonly used:

o Primary or Main Memory

o Secondary Memory

Primary Memory:

o Primary memory is the main memory of the computer.​

o It stores programs and data which are currently needed by CPU.

o Functions of primary memory:

To contain a copy of the main software program i.e. operating system. This
program is loaded into the primary memory when the computer is turned on.

Temporarily store a copy of the application program.

Temporarily store the data input from the keyboard.

Temporarily store the result which is generated from processing until it is

transferred to output device.

o Primary memory is of two types.

1. RAM (Random Access Memory)

2. ROM (Read Only Memory)

Random Access Memory (RAM):

RAM is also called as the main memory of a computer.

Ram temporarily stores the computer operating system, application program and current data
so that the processor can reach them quickly.

RAM is faster memory.

RAM is a volatile in nature i.e. when the power is switched off; the data in this memory is lost.

Types of RAM

o Static RAM (SRAM)

 Static RAM chip is usually used in cache memory due to its high speed.

It stores information as long as the power supply is on.

SRAM is more expensive than DRAM and it takes up more space.

o Dynamic RAM (DRAM)

It is the most common type of memory chip.

DRAM is cheaper and they consume less power.

It uses transistor and capacitors.

9 | ​P a g e
Chapter 1- Typical Configuration of Computer System II PUC

They are further classified as

SDRAM

SDRAM stands for ​Synchronous Dynamic RAM.​

It is synchronized to the system clock.

Since it is synchronized to the CPU, it known’s when the next cycle is

coming and has the data ready when the CPU requests it.
DDR RAM

DDR RAM stands for ​Double Data Rate RAM​.

It works same as SD RAM but the data transfer rate is double when
compared to SD RAM.

Different types of DDR RAM are DDR1, DDR2, and DDR3.

Read Only Memory (ROM):

ROM stands for “​Read Only memory​”.

ROM is ​non-volatile memory​ i.e. the information stored in it is not lost even when the power
supply goes off.

It is used for permanent storage of information.

Difference between RAM and ROM:

ROM
RAM

RAM stands for Random Access ROM stands for Read-Only

Memory Memory

Volatile Memory
Non-volatile Memory
RAM require a flow of electrically
to retain data
ROM will retain data without
Type: DRAM, SRAM the flow of electricity

Type: PROM, EPROM

 Secondary Memory:

The secondary memory is used as auxiliary memory. The secondary memory is used for bulk
storage or mass storage of programs, data, and other information.

It has much larger capacity than main memory.

The secondary memory retains the information once stored on it.

The magnetic memory such as Hard Disk Drive (HDD), Compact Disk, Pen Drive, Memory
cards is the most commonly used secondary memory in the computer.

10 | ​P a g e
Important
3 Marks
Chapter 1- Typical Configuration of Computer System II PUC

Difference between Primary and Secondary Memory:

Primary Memory Secondary Memory

Magnetic or Optical
Semi conductor Memory Memory

Volatile
Non-Volatile

Expensive Less Expensive

Faster Slower

Main Memory
Auxiliary Memory
Example: RAM, ROM Example: HDD, Pen drive etc

Cache Memory:

The cache memory is a very high speed memory placed in between RAM and CPU.

Cache memory stores data that is used more often, temporarily and makes it available to CPU at fast rate.

Hence it is used to increase the speed of processing.

∙ Cache memory is very expensive, so it is smaller in size.

∙ Cache memory of sizes 256 KB to 2 MB.

It is categorized as “levels”.

Level 1 (L1) cache​: It is extremely fast but relatively small and is usually present inside the
CPU. The size of L1 cache varies from 32 KB to 512 KB

Level 2 (L2) cache​: It may be located outside the CPU on a separate chip a high speed system
bus interconnecting the cache to the CPU. The size of L2 cache varies from 1MB to 2MB.

Level 3 (L3) cache​: It is typically specialized memory that works to improve the performance
of L1 and L2. It is slower the L1 or L2 but it is usually double the speed of RAM.
 Power supply to the computer system
o Switch Mode Power Supply:

SMPS stands for ​Switch Mode Power Supply​.

An SMPS converts AC power from an electrical outlet to DC power needed by system

components.

The SMPS contains the power card plug, a fan for cooling because it generates a lot of heat.

11 | ​P a g e
Chapter 1- Typical Configuration of Computer System II PUC

o UPS:

UPS stands for “​Uninterruptible Power Supply”.​

An UPS is a power supply that includes a battery to maintain power in the event a power
failure.

An UPS keeps a computer running for several minutes to few hours after a power failure.

There are two types of UPS

∙​ Offline UPS: Important

3 Marks

o Also known as “Standby UPS”

o Offline UPS monitors the power line and switches to battery power as soon as it detects
a problem.

Online UPS:

o An online UPS continuously provides power from its own inverter, even when the
power line is functioning properly.

o Online UPS is more costly than offline UPS.

Assembling the Computer System

Computer configuration is the process of setting up your hardware devices and assigning
resources to them so that they work together without problems.
 CHAPTER 1 – TYPICAL CONFIGURATION OF COMPUTER SYSTEM BLUE PRINT

VSA (1 marks) SA (2 marks) LA (3 Marks) Essay (5 Marks) Total

01 Question - 01 Question - 02 Question
Question no 1 - Question no 19 - 04 Marks

Important Questions
1 Marks Question:
1. What is Microprocessor?
2. What is Motherboard? [June 2015]
3. Expand USB.
4. What is data bus? [March 2015]

5. Which memory is known as main memory?

6. Which memory is considered as working memory of CPU?

7. What is Cache Memory? [June 2016]

8. What is Bus? [March 2017]
9. Expand SDRAM.
10. Expand ISA [March 2016]

11. Expand SMPS.

3 Marks Question:
1. Explain the characteristics of motherboard. [March 2017]
2. Explain three types of motherboard. [June 2016]
3. Mention the components of the motherboard.
4. What is port? Explain serial port. [March 2015]
 5. What is meant by plug and play device? Explain.

6. Write any three features of USB.

7. Explain Cache memory.

8. What is the function of UPS? Mention the different types of UPS. [June2015,March 2016]

12 | ​P a g e