MAHARASHTRA STATE BOARD OF TECHNICAL EDUCATION

(Autonomous)
(ISO/IEC - 27001 - 2013 Certified)

SUMMER-2024 EXAMINATION
Model Answer – Only for the Use of RAC Assessors

Subject Name: ENGINEERING DRAWING Subject Code: 22207

Important Instructions to examiners: XXXXX
1) The answers should be examined by key words and not as word-to-word as given in the model answer scheme.
2) The model answer and the answer written by candidate may vary but the examiner may try to assess the
understanding level of the candidate.
3) The language errors such as grammatical, spelling errors should not be given more Importance (Not applicable for
subject English and Communication Skills.
4) While assessing figures, examiner may give credit for principal components indicated in the figure. The figures drawn
by candidate and model answer may vary. The examiner may give credit for any equivalent figure drawn.
5) Credits may be given step wise for numerical problems. In some cases, the assumed constant values may vary and
there may be some difference in the candidate’s answers and model answer.
6) In case of some questions credit may be given by judgement on part of examiner of relevant answer based on
candidate’s understanding.
7) For programming language papers, credit may be given to any other program based on equivalent concept.
8) As per the policy decision of Maharashtra State Government, teaching in English/Marathi and Bilingual (English +
Marathi) medium is introduced at first year of AICTE diploma Programme from academic year 2021-2022. Hence if
the students write answers in Marathi or bilingual language (English +Marathi), the Examiner shall consider the same
and assess the answer based on matching of concepts with model answer.

Q. Sub Answer Marking

No. Q. Scheme
N.

Q1 Solve any FIVE of the following 5X2=10

a 02 marks
Eye foundation Bolt

Page No: ____/ N

 MAHARASHTRA STATE BOARD OF TECHNICAL EDUCATION
(Autonomous)
(ISO/IEC - 27001 - 2013 Certified)

SUMMER-2024 EXAMINATION
Model Answer – Only for the Use of RAC Assessors

Subject Name: ENGINEERING DRAWING Subject Code: 22207

Q. Sub Answer XXXXXMarking

No. Q. Scheme
N.

b i) Glass ii) Liquid

01 mark
for each
type

c i) Single riveted lap joint ii ) Double riveted lap joint

01 mark
for each
type

d 1.Square Butt Weld 2.Single V-butt weld 01 mark

for each
type

e Muff coupling 02 marks

(Each
view 01
Mark)

F If line is perpendicular to H.P. and parallel to V.P. state whether following statements are True or 01 mark
False for each
i) Front view of line shows true length : True
ii) Top view of line is inclined to XY line : false

g The Different types of sections in sectional orthographic views Min.

1) Full section 2) Half section 3) Offset Section 4) Revolved Section 5) Aligned section four
6) Removed section 7) Partial or broken section
½ Mark
for each

Page No: ____/ N

 MAHARASHTRA STATE BOARD OF TECHNICAL EDUCATION
(Autonomous)
(ISO/IEC - 27001 - 2013 Certified)

SUMMER-2024 EXAMINATION
Model Answer – Only for the Use of RAC Assessors

Subject Name: ENGINEERING DRAWING Subject Code: 22207

2 Solve any THREE of the following XXXXX

3X4=12

a 03 Marks
for correct
solution,
1 Mark for
angles.

(including
Dimensions
and Line
work)

Angle made by the line with H.P. is 310 and with V.P. is 550 (20 to 30 variation possible)

b ( Initial
position 02
Marks,
Final
position 02
Marks )

(including
Dimensions
and Line
work)

Page No: ____/ N

 MAHARASHTRA STATE BOARD OF TECHNICAL EDUCATION
(Autonomous)
(ISO/IEC - 27001 - 2013 Certified)

SUMMER-2024 EXAMINATION
Model Answer – Only for the Use of RAC Assessors

Subject Name: ENGINEERING DRAWING Subject Code: 22207

Q. Sub Answer XXXXX

Marking
No. Q. Scheme
N.

2 c 4 Marks
for correct
solution

(including
Dimensions
and Line
work)

d Initial
position 01
Marks,

Final
position 02
Marks

Correct
angle 01
Mark.

(including
Dimensions
and Line
work)

Page No: ____/ N

 MAHARASHTRA STATE BOARD OF TECHNICAL EDUCATION
(Autonomous)
(ISO/IEC - 27001 - 2013 Certified)

SUMMER-2024 EXAMINATION
Model Answer – Only for the Use of RAC Assessors

Subject Name: ENGINEERING DRAWING Subject Code: 22207

Q. Sub Answer XXXXXMarking

No. Q. Scheme
N.

F.V. 02
Marks
2 e
T. V. 02
Marks

(including
Dimensions
and Line
work)

3 Solve any TWO of the following 8X2=16

Page No: ____/ N

 MAHARASHTRA STATE BOARD OF TECHNICAL EDUCATION
(Autonomous)
(ISO/IEC - 27001 - 2013 Certified)

Initial
position
03 Marks,
Final
position
05 Marks

(including
Dimensions
and Line
work)

SUMMER-2024 EXAMINATION
Model Answer – Only for the Use of RAC Assessors

Subject Name: ENGINEERING DRAWING Subject Code: 22207

Q. Sub Answer XXXXXMarking

No. Q. Scheme
N.

Page No: ____/ N

 MAHARASHTRA STATE BOARD OF TECHNICAL EDUCATION
(Autonomous)
(ISO/IEC - 27001 - 2013 Certified)

Front
view 03
3 b Marks,

Sectional
top View
02 Marks

True
shape of
section
03 Marks

(including
Dimensions
and Line
work)

Initial
position
c 03 Marks,
Final
position
05 Marks

(including
Dimensions
and Line
work)

Page No: ____/ N

 MAHARASHTRA STATE BOARD OF TECHNICAL EDUCATION
(Autonomous)
(ISO/IEC - 27001 - 2013 Certified)

SUMMER-2024 EXAMINATION
Model Answer – Only for the Use of RAC Assessors

Subject Name: ENGINEERING DRAWING Subject Code: 22207

Q. Sub Answer XXXXX

Marking
No. Q. Scheme
N.

4 Solve ant TWO of the following 8X2=16

a 04 Marks
for Sect.
F.V.,

04 Marks
for R.H.S.V.

(including
Dimensions
and Line
work)

04 Marks
for Sect.
F.V.,
b 04 Marks
for T.V.
(including
Dimensions
and Line
work)

Page No: ____/ N

 MAHARASHTRA STATE BOARD OF TECHNICAL EDUCATION
(Autonomous)
(ISO/IEC - 27001 - 2013 Certified)

SUMMER-2024 EXAMINATION
Model Answer – Only for the Use of RAC Assessors

Subject Name: ENGINEERING DRAWING Subject Code: 22207

Q. S Answer XXXXX
Marking
No u Scheme
.
Q

4 c 02 Marks
for F.V.

02 Marks
for
R.H.S.V.
and

04 Marks
For
Auxillary
view
(including
Dimension
s and Line
work)

Page No: ____/ N

 MAHARASHTRA STATE BOARD OF TECHNICAL EDUCATION
(Autonomous)
(ISO/IEC - 27001 - 2013 Certified)

SUMMER-2024 EXAMINATION
Model Answer – Only for the Use of RAC Assessors

Subject Name: ENGINEERING DRAWING Subject Code: 22207

Q. Sub Answer XXXXX

Marking
No. Q. Scheme
N.

Page No: ____/ N

 MAHARASHTRA STATE BOARD OF TECHNICAL EDUCATION
(Autonomous)
(ISO/IEC - 27001 - 2013 Certified)

5 Solve ant TWO of the following 2X8=16

03 Marks
for Sect.
F.V. ,

02 Marks
for T.V.
and

03 Marks
for
L.H.S.V.
(including
Dimensions
and Line
work)

b 04 Marks
for Sect.
F.V.,

04 Marks
for T.V.
(including
Dimensions
and Line
work)

SUMMER-2024 EXAMINATION
Model Answer – Only for the Use of RAC Assessors

Subject Name: ENGINEERING DRAWING Subject Code: 22207

Q. Sub Answer XXXXX Marking

No. Q. N. Scheme

Page No: ____/ N

 MAHARASHTRA STATE BOARD OF TECHNICAL EDUCATION
(Autonomous)
(ISO/IEC - 27001 - 2013 Certified)

Front
view 02
Marks,

Sectional
top View
02
Marks,

True
shape of
section
02
Marks
and

sect. S.V.
02 Marks

Page No: ____/ N