Piston rod cylinder ► Short-stroke and compact cylinders

Series KPZ

Brochure
2

Piston rod cylinder ► Short-stroke and compact cylinders

Series KPZ

Compact cylinder, Series KPZ

► Ports: M5 - G 1/8 ► Single-acting, retracted without pressure ► with magnetic piston 6
► cushioning: elastic ► Piston rod: Internal thread, Optionally through

Compact cylinder, Series KPZ

► Ports: M5 - G 1/8 ► Single-acting, retracted without pressure ► with magnetic piston 10
► cushioning: elastic ► Piston rod: external thread, Optionally through (hollow)

Compact cylinder, Series KPZ

► Ports: M5 - G 1/8 ► Single-acting, extended without pressure ► with magnetic piston 14
► cushioning: elastic ► Piston rod: Internal thread, Optionally heat-resistant

Compact cylinder, Series KPZ

► Ports: M5 - G 1/8 ► Single-acting, extended without pressure ► with magnetic piston 18
► cushioning: elastic ► Piston rod: external thread, Optionally heat-resistant

Compact cylinder, Series KPZ

► Ports: M5 - G 1/8 ► double-acting ► with magnetic piston ► cushioning: elastic 22
► Piston rod: Internal thread, Optionally through ► ATEX optional

Compact cylinder, Series KPZ

► Ports: M5 - G 1/8 ► double-acting ► with magnetic piston ► cushioning: elastic 27
► Piston rod: external thread, Optionally through (hollow) ► ATEX optional

Compact cylinder, Series KPZ

► Ports: M5 - G 1/8 ► double-acting ► with magnetic piston ► cushioning: elastic 32
► Piston rod: non-rotating, with front plate, Optionally through

Accessories
Accessories overview
Accessories overview
38

Cylinder mountings
Foot mounting, Series MS1
39

Flange mounting, Series MF1, MF2

40

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed informa-
tion
Pneumatics catalog, online PDF, as of 2016-04-07, ©AVENTICS S.à r.l., subject to change
 3

Piston rod cylinder ► Short-stroke and compact cylinders

Series KPZ

Clevis mounting, Series AB3

41

Rear eye, Series MP4

► for clevis mounting MP2 and AB3 41

Clevis mounting, Series MP2

► for Series KPZ 42

Bolts, AA4
43

Trunnion mounting, front or rear, Series MT5, MT6

43

Bearing brackets MT4, MT5, MT6, Series AT4

► Cylinder mounting in accordance with ISO 15552 ► for Series CCI, ICL, KPZ, PRA, 44
TRB

Intermediate flange, Series JP2

► for multi-position cylinders ► for Series CCI, KPZ, KPZ 45

Mounting kit
46

Piston rod mountings

Nut for piston rod, Series MR9
47

Rod clevis, Series AP2

► galvanized steel 47

Ball eye rod end with flange, Series AP6

► Steel 48

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed informa-
tion
Pneumatics catalog, online PDF, as of 2016-04-07, ©AVENTICS S.à r.l., subject to change
4

Piston rod cylinder ► Short-stroke and compact cylinders

Series KPZ

Rod clevis, Series PM6

► galvanized steel 49

Flexible spherical coupling, Series PM5

49

Flexible plate coupling, Series PM7

50

Sensors and sensor mountings, accessories

Sensor, Series ST6
► 6 mm T-slot ► with cable ► open cable ends, 2-pin, open cable ends, 3-pin 51

Sensor, Series ST6

► 6 mm T-slot ► with cable ► Plug, M8, 3-pin, with knurled screw 53

Sensor, Series ST6

► 6 mm T-slot ► with cable ► Plug, M8, 3-pin 54

Sensor, Series ST6

► 6 mm T-slot ► with cable ► Plug, M12, 3-pin, with knurled screw 56

Sensors, Series SM6

► 6 mm groove ► with cable ► without wire end ferrule, tin-plated, 4-pin ► with distance 57
measuring sensor, measurement range 32 - 256 mm
Sensors, Series SM6
► 6 mm groove ► with cable ► Plug, M8x1, 4-pin, with knurled screw ► with distance 59
measuring sensor, measurement range 32 - 256 mm
Sensor, Series SN3
► Plug, M12, 3-pin ► welding-proof 60

Sensor mounting, Series CB1

► for Series SN3 ► to mount on cylinder PRA, KPZ, GPC, CCI, KHZ 61

Sensor clamp, Series ST6

► for Series ST6 62

Connecting cable, Series CN2

►  Socket, M8, 3-pin, straight ►  open cable ends, 3-pin 62

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed informa-
tion
Pneumatics catalog, online PDF, as of 2016-04-07, ©AVENTICS S.à r.l., subject to change
 5

Piston rod cylinder ► Short-stroke and compact cylinders

Series KPZ

Connecting cable, Series CN2

►  Socket, M8x1, 3-pin, angled ►  open cable ends, 3-pin 64

Socket, M8x1, Series CN2

►  Socket, M8x1, 3-pin 65

Socket, M8x1, Series CN2

►  Socket, M8x1, 3-pin, angled 67

Other accessories
Silencers, Series SI1
► Sintered bronze 69

Silencers, Series SI1

► Sintered bronze 69

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed informa-
tion
Pneumatics catalog, online PDF, as of 2016-04-07, ©AVENTICS S.à r.l., subject to change
6
Piston rod cylinder ► Short-stroke and compact cylinders

Compact cylinder, Series KPZ

► Ports: M5 - G 1/8 ► Single-acting, retracted without pressure ► with magnetic piston ► cushioning: elastic
► Piston rod: Internal thread, Optionally through

Standards NFE 49004

Compressed air connection Internal thread

Ambient temperature min./max. -20°C / +80°C

Medium temperature min./max. -20°C / +80°C
Medium Compressed air
Max. particle size 50 µm
Oil content of compressed air 0 mg/m³ - 5 mg/m³
Pressure for determining piston forces 6,3 bar

Materials:
24539
Cylinder tube Aluminum, anodized
Piston rod Stainless steel
Front cover Aluminum
End cover Aluminum

Technical Remarks
■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.
■ The oil content of compressed air must remain constant during the life cycle.
■ Use only the approved oils from AVENTICS, see chapter „Technical information“.
■ The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C/120 °C) is fluorocaoutchouc.
■ Further options can be generated in the Internet configurator.

Piston Ø [mm] 16 20 25 32 40
Retracting piston force [N] 12 13 25 35 43
Extracting piston force [N] 115 185 284 472 749
Impact energy [J] 0.11 0.15 0.2 0.4 0.52
Weight 0 mm stroke [kg] 0.07 0.098 0.143 0.223 0.333
+10 mm stroke [kg] 0.014 0.02 0.02 0.03 0.04
Stroke max. [mm] 25 25 25 25 25
Working pressure min./max. [bar] 1.5 - 10 1.5 - 10 1.5 - 10 1.3 - 10 1.3 - 10
Scraper material - Polyurethane Polyurethane Polyurethane Polyurethane
Sealing material Nitrile butadiene Nitrile butadiene Nitrile butadiene Polyurethane Polyurethane
rubber rubber rubber

Piston Ø [mm] 50 63 80 100

Retracting piston force [N] 82 82 105 215
Extracting piston force [N] 1155 1882 3062 4733
Impact energy [J] 0.64 0.75 0.75 1
Weight 0 mm stroke [kg] 0.446 0.757 1.318 2.276
+10 mm stroke [kg] 0.05 0.08 0.11 0.14
Stroke max. [mm] 25 25 25 25
Working pressure min./max. [bar] 1 - 10 1 - 10 1 - 10 1 - 10
Scraper material Polyurethane Polyurethane Polyurethane Polyurethane
Sealing material Polyurethane Polyurethane Polyurethane Polyurethane

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed informa-
tion
Pneumatics catalog, online PDF, as of 2016-04-07, ©AVENTICS S.à r.l., subject to change
 7
Piston rod cylinder ► Short-stroke and compact cylinders

Compact cylinder, Series KPZ

► Ports: M5 - G 1/8 ► Single-acting, retracted without pressure ► with magnetic piston ► cushioning: elastic
► Piston rod: Internal thread, Optionally through

Piston Ø 16 20 25 32 40
Piston rod thread M4 M6 M6 M8 M8
Ports M5 M5 M5 G 1/8 G 1/8
Stroke 5 0822490000 0822491000 0822492000 0822493000 0822494000
10 0822490001 0822491001 0822492001 0822493001 0822494001
15 0822490002 0822491002 0822492002 0822493002 0822494002
20 0822490003 0822491003 0822492003 0822493003 0822494003
25 0822490004 0822491004 0822492004 0822493004 0822494004
Piston Ø 50 63 80 100
Piston rod thread M10 M10 M12 M16
Ports G 1/8 G 1/8 G 1/8 G 1/8
Stroke 5 0822495000 0822496000 0822497000 0822498000
10 0822495001 0822496001 0822497001 0822498001
15 0822495002 0822496002 0822497002 0822498002
20 0822495003 0822496003 0822497003 0822498003
25 0822495004 0822496004 0822497004 0822498004

Configurable product

This product is configurable. Please use our Internet configurator at http://www.aventics.com or contact the
nearest AVENTICS sales office.

Retracting piston force

F[N] 35 F[N] 250
30 200
25
20 32 150
15 25 100 100
10 20 80
5 16 50 50, 63
40
0 0
0 5 10 15 20 25 0 5 10 15 20 25
s [mm] s [mm]
00112000

F = spring return force, s = return stroke

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed informa-
tion
Pneumatics catalog, online PDF, as of 2016-04-07, ©AVENTICS S.à r.l., subject to change
8
Piston rod cylinder ► Short-stroke and compact cylinders

Compact cylinder, Series KPZ

► Ports: M5 - G 1/8 ► Single-acting, retracted without pressure ► with magnetic piston ► cushioning: elastic
► Piston rod: Internal thread, Optionally through

Dimensions
AF E
LW EE LA TG

LJ
MM

DA

TG
KF

E
RT
T
DT

6,85 ±0,15

3,65 ±0,15
RR

LB LB SW 5,35 ±0,15

PL PL
BG BG
WH
ZA+S ZB+S
ZB+S WH+S 63 - 100

LJ
KF
KFxAF

EE

LW 1) WH 1) AF
WH
X1 X1 X1 X1
X1 X1 X1 X1
X1
X1
X1

X1

X2
X3

X3
X1

X1

X2
X1
X1

X1

X1

X1 X1 X1 X1
X1 X1 X1 X1

16 20 - 25 32 - 40 50 63 - 100
24273

S = stroke
T = View for sensor groove
1) Filter

Piston Ø AF 1) BG 1) DA DT E EE KF LA LB LJ LW MM
H11 H13 f8
16 10 14.5 10 6 29.5 M5 M4 2.5 3.5 2.5 2.8 8
20 12 15.5 12 7.5 36 M5 M6 2.5 4.5 4.5 3.7 10
10: S<3 mm 2)

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed informa-
tion
Pneumatics catalog, online PDF, as of 2016-04-07, ©AVENTICS S.à r.l., subject to change
 9
Piston rod cylinder ► Short-stroke and compact cylinders

Compact cylinder, Series KPZ

► Ports: M5 - G 1/8 ► Single-acting, retracted without pressure ► with magnetic piston ► cushioning: elastic
► Piston rod: Internal thread, Optionally through

Piston Ø AF 1) BG 1) DA DT E EE KF LA LB LJ LW MM
H11 H13 f8
25 12 15.5 12 8 40 M5 M6 2.5 4.4 5 3.7 10
10: S<3 mm 2)
32 12 18 14 8.6 50 G 1/8 M8 2.5 5.5 5.1 5 12
40 12 18 14 9 58 G 1/8 M8 2.5 5.5 9.6 5 12
50 16 24 18 11 68 G 1/8 M10 2.5 2 8.5 5.7 16
12: S<4 mm 2)
63 16 24 18 11 80 G 1/8 M10 2.5 2 17.8 5.7 16
12: S<4 mm 2)
80 20 28 23 14 99 G 1/8 M12 3 1 22.9 7 20
15: S<3 mm 2)
100 26 27.5 28 15 120 G 1/8 M16 3 3.5 26.5 7.5 25
21: S<5 mm 2)

Piston Ø PL RT SW TG WH X1 X2 X3 ZA +S ZB +S
16 7.5 M4 7 18 ±0,4 4.5 – – – 38 43 0/+1,4
20 7.5 M5 8 22 ±0,4 5 4.2 – – 38 43 0/+1,4
25 7.5 M5 8 26 ±0,4 5.5 4.5 – – 39 45 0/+1,4
32 8.5 M6 10 32 ±0,5 7 6.5 – – 44 51 0/+1,6
40 8.5 M6 10 42 ±0,5 7 11 – – 45 52 0/+1,6
50 8.5 M8 13 50 ±0,6 7.5 13 4 13 45.5 53 0/+1,6
63 8.5 M8 13 62 ±0,7 8 18 12 21 49 57 0/+2
80 8.3 M10 16 82 ±0,7 9.5 18 16.5 25.5 54.5 64 0/+2
100 9.7 M10 21 103 ±0,7 10.5 20 20 29 66.5 77 0/+2
1) Min.
2) Option: through piston rod
S = stroke

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed informa-
tion
Pneumatics catalog, online PDF, as of 2016-04-07, ©AVENTICS S.à r.l., subject to change
10
Piston rod cylinder ► Short-stroke and compact cylinders

Compact cylinder, Series KPZ

► Ports: M5 - G 1/8 ► Single-acting, retracted without pressure ► with magnetic piston ► cushioning: elastic
► Piston rod: external thread, Optionally through (hollow)

Standards NFE 49004

Compressed air connection Internal thread

Ambient temperature min./max. -20°C / +80°C

Medium temperature min./max. -20°C / +80°C
Medium Compressed air
Max. particle size 50 µm
Oil content of compressed air 0 mg/m³ - 5 mg/m³
Pressure for determining piston forces 6,3 bar

Materials:
24538
Cylinder tube Aluminum, anodized
Piston rod Stainless steel
Front cover Aluminum
End cover Aluminum
Nut for piston rod Steel, galvanized

Technical Remarks
■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.
■ The oil content of compressed air must remain constant during the life cycle.
■ Use only the approved oils from AVENTICS, see chapter „Technical information“.
■ The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C/120 °C) is fluorocaoutchouc.
■ Further options can be generated in the Internet configurator.

Piston Ø [mm] 16 20 25 32 40
Retracting piston force [N] 12 13 25 35 43
Extracting piston force [N] 115 185 284 472 749
Impact energy [J] 0.11 0.15 0.2 0.4 0.52
Weight 0 mm stroke [kg] 0.083 0.112 0.157 0.237 0.347
+10 mm stroke [kg] 0.014 0.02 0.02 0.03 0.04
Stroke max. [mm] 25 25 25 25 25
Working pressure min./max. [bar] 1.5 - 10 1.5 - 10 1.5 - 10 1.3 - 10 1.3 - 10
Scraper material - Polyurethane Polyurethane Polyurethane Polyurethane
Sealing material Nitrile butadiene Nitrile butadiene Nitrile butadiene Polyurethane Polyurethane
rubber rubber rubber

Piston Ø [mm] 50 63 80 100

Retracting piston force [N] 82 82 105 215
Extracting piston force [N] 1155 1882 3062 4733
Impact energy [J] 0.64 0.75 0.75 1
Weight 0 mm stroke [kg] 0.468 0.779 1.368 2.375
+10 mm stroke [kg] 0.05 0.08 0.11 0.14
Stroke max. [mm] 25 25 25 25
Working pressure min./max. [bar] 1 - 10 1 - 10 1 - 10 1 - 10
Scraper material Polyurethane Polyurethane Polyurethane Polyurethane
Sealing material Polyurethane Polyurethane Polyurethane Polyurethane

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed informa-
tion
Pneumatics catalog, online PDF, as of 2016-04-07, ©AVENTICS S.à r.l., subject to change
 11
Piston rod cylinder ► Short-stroke and compact cylinders

Compact cylinder, Series KPZ

► Ports: M5 - G 1/8 ► Single-acting, retracted without pressure ► with magnetic piston ► cushioning: elastic
► Piston rod: external thread, Optionally through (hollow)

Piston Ø 16 20 25 32 40
Piston rod thread M8 M10x1,25 M10x1,25 M10x1,25 M10x1,25
Ports M5 M5 M5 G 1/8 G 1/8
Stroke 5 0822490200 0822491200 0822492200 0822493200 0822494200
10 0822490201 0822491201 0822492201 0822493201 0822494201
15 0822490202 0822491202 0822492202 0822493202 0822494202
20 0822490203 0822491203 0822492203 0822493203 0822494203
25 0822490204 0822491204 0822492204 0822493204 0822494204
Piston Ø 50 63 80 100
Piston rod thread M12x1,25 M12x1,25 M16x1,5 M20x1,5
Ports G 1/8 G 1/8 G 1/8 G 1/8
Stroke 5 0822495200 0822496200 0822497200 0822498200
10 0822495201 0822496201 0822497201 0822498201
15 0822495202 0822496202 0822497202 0822498202
20 0822495203 0822496203 0822497203 0822498203
25 0822495204 0822496204 0822497204 0822498204

Configurable product

This product is configurable. Please use our Internet configurator at http://www.aventics.com or contact the
nearest AVENTICS sales office.

Retracting piston force

F[N] 35 F[N] 250
30 200
25
20 32 150
15 25 100 100
10 20 80
5 16 50 50, 63
40
0 0
0 5 10 15 20 25 0 5 10 15 20 25
s [mm] s [mm]
00112000

F = spring return force, s = return stroke

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed informa-
tion
Pneumatics catalog, online PDF, as of 2016-04-07, ©AVENTICS S.à r.l., subject to change
12
Piston rod cylinder ► Short-stroke and compact cylinders

Compact cylinder, Series KPZ

► Ports: M5 - G 1/8 ► Single-acting, retracted without pressure ► with magnetic piston ► cushioning: elastic
► Piston rod: external thread, Optionally through (hollow)

Dimensions
AF E A
LW EE LA TG WH

SW*

LJ
MM

MM
DA

TG
KF

KK
E
RT
DT

KV
RR

LB LB SW KW
PL PL LW*
T
BG BG ±0,15
6,85
3,65 ±0,15

WH 63 - 100
5,35 ±0,15
ZA+S
ZB+S

LJ
80 - 100

EE
DS
DK

LW 1)
WH
ZB+S A
A WH+S
DS

DS
KK
KK

KK

KK

KV KV
KW 1) KW 1)
WH

X1 X1 X1 X1
X1 X1 X1 X1
X1
X1
X1

X1

X2
X3

X3
X1

X1

X2
X1
X1

X1

X1

X1 X1 X1 X1
X1 X1 X1 X1

16 20 - 25 32 - 40 50 63 - 100
24275

S = stroke
T = View for sensor groove
1) Filter

Piston Ø A BG 1) DA Ø DK Ø DS DT E EE KK KV KW LA LB
H11 H13
16 20 14.5 10 – – 6 29.5 M5 M8x1,25 13 4 2.5 3.5

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed informa-
tion
Pneumatics catalog, online PDF, as of 2016-04-07, ©AVENTICS S.à r.l., subject to change
 13
Piston rod cylinder ► Short-stroke and compact cylinders

Compact cylinder, Series KPZ

► Ports: M5 - G 1/8 ► Single-acting, retracted without pressure ► with magnetic piston ► cushioning: elastic
► Piston rod: external thread, Optionally through (hollow)

Piston Ø A BG 1) DA Ø DK Ø DS DT E EE KK KV KW LA LB
H11 H13
20 22 15.5 12 – 3 7.5 36 M5 M10x1,25 16 5 2.5 4.5
25 22 15.5 12 – 3 8 40 M5 M10x1,25 16 5 2.5 4.4
32 22 18 14 – 4.5 8.6 50 G 1/8 M10x1,25 16 5 2.5 5.5
40 22 18 14 – 4.5 9 58 G 1/8 M10x1,25 16 5 2.5 5.5
50 24 24 18 – 6 11 68 G 1/8 M12x1,25 18 6 2.5 2
63 24 24 18 – 6 11 80 G 1/8 M12x1,25 18 6 2.5 2
80 32 28 23 G 1/8 8 14 99 G 1/8 M16x1,5 24 8 3 1
100 40 27.5 28 G 1/4 11.5 15 120 G 1/8 M20x1,5 30 10 3 3.5

Piston Ø LJ LW MM PL RT SW TG WH X1 X2 X4 ZA +S
f8
16 2.5 2.8 8 7.5 M4 7 18 ±0,4 4.5 – – – 38
20 4.5 3.7 10 7.5 M5 8 22 ±0,4 5 4.2 – – 38
25 5 3.7 10 7.5 M5 8 26 ±0,4 5.5 4.5 – – 39
32 5.1 5* 12 8.5 M6 10* 32 ±0,5 7 6.5 – – 44
40 9.6 5* 12 8.5 M6 10* 42 ±0,5 7 11 – – 45
50 8.5 4,8* 16 8.5 M8 13* 50 ±0,6 7.5 13 4 13 45.5
63 17.8 4,8* 16 8.5 M8 13* 62 ±0,7 8 18 12 21 49
80 22.9 6,4* 20 8.3 M10 16* 82 ±0,7 9.5 18 16.5 25.5 54.5
100 26.5 6,4* 25 9.7 M10 21* 103 ±0,7 10.5 20 20 20 66.5

Piston Ø ZB +S
16 43 0/+1,4
20 43 0/+1,4
25 45 0/+1,4
32 51 0/+1,6
40 52 0/+1,6
50 53 0/+1,6
63 57 0/+2
80 64 0/+2
100 77 0/+2
1) Min.
S = stroke
* Hexagonal wrench flats

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed informa-
tion
Pneumatics catalog, online PDF, as of 2016-04-07, ©AVENTICS S.à r.l., subject to change
14
Piston rod cylinder ► Short-stroke and compact cylinders

Compact cylinder, Series KPZ

► Ports: M5 - G 1/8 ► Single-acting, extended without pressure ► with magnetic piston ► cushioning: elastic
► Piston rod: Internal thread, Optionally heat-resistant

Standards NFE 49004

Compressed air connection Internal thread

Ambient temperature min./max. -20°C / +80°C

Medium temperature min./max. -20°C / +80°C
Medium Compressed air
Max. particle size 5 µm
Oil content of compressed air 0 mg/m³ - 5 mg/m³
Pressure for determining piston forces 6,3 bar

Materials:
IM0041593
Cylinder tube Aluminum, anodized
Piston rod Stainless steel
Front cover Aluminum
End cover Aluminum

Technical Remarks
■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.
■ The oil content of compressed air must remain constant during the life cycle.
■ Use only the approved oils from AVENTICS, see chapter „Technical information“.
■ The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C/120 °C) is fluorocaoutchouc.
■ Further options can be generated in the Internet configurator.

Piston Ø [mm] 16 20 25 32 40
Retracting piston force [N] 12 13 25 35 43
Extracting piston force [N] 115 185 284 472 749
Impact energy [J] 0.11 0.15 0.2 0.4 0.52
Weight 0 mm stroke [kg] 0.07 0.098 0.143 0.223 0.333
+10 mm stroke [kg] 0.014 0.02 0.02 0.03 0.04
Stroke max. [mm] 25 25 25 25 25
Working pressure min./max. [bar] 1.5 - 10 1.5 - 10 1.5 - 10 1.3 - 10 1.3 - 10
Scraper material - Polyurethane Polyurethane Polyurethane Polyurethane
Sealing material Nitrile butadiene Nitrile butadiene Nitrile butadiene Polyurethane Polyurethane
rubber rubber rubber

Piston Ø [mm] 50 63 80 100

Retracting piston force [N] 82 82 105 215
Extracting piston force [N] 1155 1882 3062 4733
Impact energy [J] 0.64 0.75 0.75 1
Weight 0 mm stroke [kg] 0.446 0.757 1.318 2.276
+10 mm stroke [kg] 0.05 0.08 0.11 0.14
Stroke max. [mm] 25 25 25 25
Working pressure min./max. [bar] 1 - 10 1 - 10 1 - 10 1 - 10
Scraper material Polyurethane Polyurethane Polyurethane Polyurethane
Sealing material Polyurethane Polyurethane Polyurethane Polyurethane

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed informa-
tion
Pneumatics catalog, online PDF, as of 2016-04-07, ©AVENTICS S.à r.l., subject to change
 15
Piston rod cylinder ► Short-stroke and compact cylinders

Compact cylinder, Series KPZ

► Ports: M5 - G 1/8 ► Single-acting, extended without pressure ► with magnetic piston ► cushioning: elastic
► Piston rod: Internal thread, Optionally heat-resistant

Piston Ø 16 20 25 32 40
Piston rod thread M4 M6 M6 M8 M8
Ports M5 M5 M5 G 1/8 G 1/8
Stroke 5 0822490100 0822491100 0822492100 0822493100 0822494100
10 0822490101 R480660211 0822492101 0822493101 0822494101
15 0822490102 0822491102 0822492102 0822493102 0822494102
20 0822490103 0822491103 0822492103 0822493103 0822494103
25 0822490104 0822491104 0822492104 0822493104 0822494104
Piston Ø 50 63 80 100
Piston rod thread M10 M10 M12 M16
Ports G 1/8 G 1/8 G 1/8 G 1/8
Stroke 5 0822495100 0822496100 0822497100 0822498100
10 0822495101 0822496101 0822497101 0822498101
15 0822495102 0822496102 0822497102 0822498102
20 0822495103 0822496103 0822497103 0822498103
25 0822495104 0822496104 0822497104 0822498104

Configurable product

This product is configurable. Please use our Internet configurator at http://www.aventics.com or contact the
nearest AVENTICS sales office.

Extracting piston force

F[N] 35 F[N] 250
30 200
25
20 32 150
15 25 100 100
10 20 80
5 16 50 50, 63
40
0 0
0 5 10 15 20 25 0 5 10 15 20 25
s [mm] s [mm]
00112000

F = spring return force, s = stroke

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed informa-
tion
Pneumatics catalog, online PDF, as of 2016-04-07, ©AVENTICS S.à r.l., subject to change
16
Piston rod cylinder ► Short-stroke and compact cylinders

Compact cylinder, Series KPZ

► Ports: M5 - G 1/8 ► Single-acting, extended without pressure ► with magnetic piston ► cushioning: elastic
► Piston rod: Internal thread, Optionally heat-resistant

Dimensions
AF E
LW EE LA TG

LJ
MM

DA

TG
KF

E
RT
DT

LB LB SW
PL PL
BG BG
WH
ZA+S
ZB+S
T
6,85 ±0,15

LJ
3,65 ±0,15

5,35 ±0,15

LW EE 1) 63 - 100
WH+S

X1 X1 X1 X1
X1 X1 X1 X1
X1
X1
X1

X1

X2
X3

X3
X1

X1

X2
X1
X1

X1

X1

X1 X1 X1 X1
X1 X1 X1 X1

16 20 - 25 32 - 40 50 63 - 100
24664

S = stroke
T = View for sensor groove

Piston Ø AF BG *) DA DT E EE KF LA LB LJ LW MM PL
H11 H13 f8
16 10 14.5 10 6 29.5 M5 M4 2.5 3.5 2.5 2.8 8 7.5
20 12 15.5 12 7.5 36 M5 M6 2.5 4.5 4.5 3.7 10 7.5
25 12 15.5 12 8 40 M5 M6 2.5 4.4 5 3.7 10 7.5
32 12 18 14 8.6 50 G 1/8 M8 2.5 5.5 5.1 5 12 8.5
40 12 18 14 9 58 G 1/8 M8 2.5 5.5 9.6 5 12 8.5

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed informa-
tion
Pneumatics catalog, online PDF, as of 2016-04-07, ©AVENTICS S.à r.l., subject to change
 17
Piston rod cylinder ► Short-stroke and compact cylinders

Compact cylinder, Series KPZ

► Ports: M5 - G 1/8 ► Single-acting, extended without pressure ► with magnetic piston ► cushioning: elastic
► Piston rod: Internal thread, Optionally heat-resistant

Piston Ø AF BG *) DA DT E EE KF LA LB LJ LW MM PL
H11 H13 f8
50 16 24 18 11 68 G 1/8 M10 2.5 2 8.5 5.7 16 8.5
63 16 24 18 11 80 G 1/8 M10 2.5 2 17.8 5.7 16 8.5
80 20 28 23 14 99 G 1/8 M12 3 1 22.9 7 20 8.3
100 26 27.5 28 15 120 G 1/8 M16 3 3.5 26.5 7.5 25 9.7

Piston Ø RT SW TG WH X1 X2 X3 ZA +S ZB+S
16 M4 7 18 ±0,4 4.5 – – – 38 43 0/+1,2
20 M5 8 22 ±0,4 5 4.2 – – 38 43 0/+1,4
25 M5 8 26 ±0,4 5.5 4.5 – – 38 45 0/+1,4
32 M6 10 32 ±0,5 7 6.5 – – 44 51 0/+1,6
40 M6 10 42 ±0,5 7 11 – – 45 52 0/+1,6
50 M8 13 50 ±0,6 7.5 13 4 13 45.5 53 0/+1,6
63 M8 13 62 ±0,7 8 18 12 21 49 57 0/+2
80 M10 16 82 ±0,7 9.5 18 16.5 25.5 54.5 64 0/+2
100 M10 21 103 ±0,7 10.5 20 20 29 66.5 77 0/+2
* min.

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed informa-
tion
Pneumatics catalog, online PDF, as of 2016-04-07, ©AVENTICS S.à r.l., subject to change
18
Piston rod cylinder ► Short-stroke and compact cylinders

Compact cylinder, Series KPZ

► Ports: M5 - G 1/8 ► Single-acting, extended without pressure ► with magnetic piston ► cushioning: elastic
► Piston rod: external thread, Optionally heat-resistant

Standards NFE 49004

Compressed air connection Internal thread

Ambient temperature min./max. -20°C / +80°C

Medium temperature min./max. -20°C / +80°C
Medium Compressed air
Max. particle size 5 µm
Oil content of compressed air 0 mg/m³ - 5 mg/m³
Pressure for determining piston forces 6,3 bar

Materials:
24741
Cylinder tube Aluminum, anodized
Piston rod Stainless steel
Front cover Aluminum
End cover Aluminum
Nut for piston rod Steel, galvanized

Technical Remarks
■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.
■ The oil content of compressed air must remain constant during the life cycle.
■ Use only the approved oils from AVENTICS, see chapter „Technical information“.
■ The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C/120 °C) is fluorocaoutchouc.
■ Further options can be generated in the Internet configurator.

Piston Ø [mm] 16 20 25 32 40
Retracting piston force [N] 12 13 25 35 43
Extracting piston force [N] 115 185 284 472 749
Impact energy [J] 0.11 0.15 0.2 0.4 0.52
Weight 0 mm stroke [kg] 0.083 0.112 0.157 0.237 0.347
+10 mm stroke [kg] 0.014 0.02 0.02 0.03 0.04
Stroke max. [mm] 25 25 25 25 25
Working pressure min./max. [bar] 1.5 - 10 1.5 - 10 1.5 - 10 1.3 - 10 1.3 - 10
Scraper material - Polyurethane Polyurethane Polyurethane Polyurethane
Sealing material Nitrile butadiene Nitrile butadiene Nitrile butadiene Polyurethane Polyurethane
rubber rubber rubber

Piston Ø [mm] 50 63 80 100

Retracting piston force [N] 82 82 105 215
Extracting piston force [N] 1155 1882 3062 4733
Impact energy [J] 0.64 0.75 0.75 1
Weight 0 mm stroke [kg] 0.468 0.779 1.368 2.375
+10 mm stroke [kg] 0.05 0.08 0.11 0.14
Stroke max. [mm] 25 25 25 25
Working pressure min./max. [bar] 1 - 10 1 - 10 1 - 10 1 - 10
Scraper material Polyurethane Polyurethane Polyurethane Polyurethane
Sealing material Polyurethane Polyurethane Polyurethane Polyurethane

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed informa-
tion
Pneumatics catalog, online PDF, as of 2016-04-07, ©AVENTICS S.à r.l., subject to change
 19
Piston rod cylinder ► Short-stroke and compact cylinders

Compact cylinder, Series KPZ

► Ports: M5 - G 1/8 ► Single-acting, extended without pressure ► with magnetic piston ► cushioning: elastic
► Piston rod: external thread, Optionally heat-resistant

Piston Ø 16 20 25 32 40
Piston rod thread M8 M10x1,25 M10x1,25 M10x1,25 M10x1,25
Ports M5 M5 M5 G 1/8 G 1/8
Stroke 5 0822490300 0822491300 0822492300 0822493300 0822494300
10 0822490301 0822491301 0822492301 0822493301 0822494301
15 0822490302 0822491302 0822492302 0822493302 0822494302
20 0822490303 0822491303 0822492303 0822493303 0822494303
25 0822490304 0822491304 0822492304 0822493304 0822494304
Piston Ø 50 63 80 100
Piston rod thread M12x1,25 M12x1,25 M16x1,5 M20x1,5
Ports G 1/8 G 1/8 G 1/8 G 1/8
Stroke 5 0822495300 0822496300 0822497300 0822498300
10 0822495301 0822496301 0822497301 0822498301
15 0822495302 0822496302 0822497302 0822498302
20 0822495303 0822496303 0822497303 0822498303
25 0822495304 0822496304 0822497304 0822498304

Configurable product

This product is configurable. Please use our Internet configurator at http://www.aventics.com or contact the
nearest AVENTICS sales office.

Extracting piston force

F[N] 35 F[N] 250
30 200
25
20 32 150
15 25 100 100
10 20 80
5 16 50 50, 63
40
0 0
0 5 10 15 20 25 0 5 10 15 20 25
s [mm] s [mm]
00112000

F = spring return force, s = stroke

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed informa-
tion
Pneumatics catalog, online PDF, as of 2016-04-07, ©AVENTICS S.à r.l., subject to change
20
Piston rod cylinder ► Short-stroke and compact cylinders

Compact cylinder, Series KPZ

► Ports: M5 - G 1/8 ► Single-acting, extended without pressure ► with magnetic piston ► cushioning: elastic
► Piston rod: external thread, Optionally heat-resistant

Dimensions
AF E A
LW EE LA TG WH

SW*
LJ
MM

MM
DA

TG
KF

KK
E
RT
DT

KV

LB LB SW KW
PL PL LW*
BG BG
WH
ZA+S
ZB+S
T
6,85 ±0,15

LJ
3,65 ±0,15

5,35 ±0,15

LW EE 1) 63 - 100
WH+S

X1 X1 X1 X1
X1 X1 X1 X1
X1
X1
X1

X1

X2
X3

X3
X1

X1

X2
X1
X1

X1

X1

X1 X1 X1 X1
X1 X1 X1 X1

16 20 - 25 32 - 40 50 63 - 100
24665

S = stroke
T = View for sensor groove

Piston Ø A BG 1) DA DT E EE KK KV KW LA LB LJ LW
H11 H13
16 20 14.5 10 6 29.5 M5 M8x1,25 13 4 2.5 3.5 2.5 2.8
20 22 15.5 12 7.5 36 M5 M10x1,25 16 5 2.5 4.5 4.5 3.7
25 22 15.5 12 8 40 M5 M10x1,25 16 5 2.5 4.4 5 3.7
32 22 18 14 8.6 50 G 1/8 M10x1,25 16 5 2.5 5.5 5.1 5*
40 22 18 14 9 58 G 1/8 M10x1,25 16 5 2.5 5.5 9.6 5*

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed informa-
tion
Pneumatics catalog, online PDF, as of 2016-04-07, ©AVENTICS S.à r.l., subject to change
 21
Piston rod cylinder ► Short-stroke and compact cylinders

Compact cylinder, Series KPZ

► Ports: M5 - G 1/8 ► Single-acting, extended without pressure ► with magnetic piston ► cushioning: elastic
► Piston rod: external thread, Optionally heat-resistant

Piston Ø A BG 1) DA DT E EE KK KV KW LA LB LJ LW
H11 H13
50 24 24 18 11 68 G 1/8 M12x1,25 18 6 2.5 2 8.5 4,8*
63 24 24 18 11 80 G 1/8 M12x1,25 18 6 2.5 2 17.8 4,8*
80 32 28 23 14 99 G 1/8 M16x1,5 24 8 3 1 22.9 6,4*
100 40 27.5 28 15 120 G 1/8 M20x1,5 30 10 3 3.5 26.5 6,4*

Piston Ø MM PL RT SW TG WH X1 X2 X4 ZA +S ZB +S
f8
16 8 7.5 M4 7 18 ±0,4 4.5 – – – 38 43 0/+1,4
20 10 7.5 M5 8 22 ±0,4 5 4.2 – – 38 43 0/+1,4
25 10 7.5 M5 8 26 ±0,4 5.5 4.5 – – 39 45 0/+1,4
32 12 8.5 M6 10* 32 ±0,5 7 6.5 – – 44 51 0/+1,6
40 12 8.5 M6 10* 42 ±0,5 7 11 – – 45 52 0/+1,6
50 16 8.5 M8 13* 50 ±0,6 7.5 13 4 13 45.5 53 0/+1,6
63 16 8.5 M8 13* 62 ±0,7 8 18 12 21 49 57 0/+2
80 20 8.3 M10 16* 82 ±0,7 9.5 18 16.5 25.5 54.5 64 0/+2
100 25 9.7 M10 21* 103 ±0,7 10.5 20 20 20 66.5 77 0/+2
1) Min.
* Hexagonal wrench flats

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed informa-
tion
Pneumatics catalog, online PDF, as of 2016-04-07, ©AVENTICS S.à r.l., subject to change
22
Piston rod cylinder ► Short-stroke and compact cylinders

Compact cylinder, Series KPZ

► Ports: M5 - G 1/8 ► double-acting ► with magnetic piston ► cushioning: elastic ► Piston rod: Internal thread,
Optionally through ► ATEX optional

Standards NFE 49004

Compressed air connection Internal thread

Ambient temperature min./max. -20°C / +80°C

Medium temperature min./max. -20°C / +80°C
Medium Compressed air
Max. particle size 50 µm
Oil content of compressed air 0 mg/m³ - 5 mg/m³
Pressure for determining piston forces 6,3 bar

Materials:
24537
Cylinder tube Aluminum, anodized
Piston rod Stainless steel
Front cover Aluminum
End cover Aluminum

Technical Remarks
■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.
■ The oil content of compressed air must remain constant during the life cycle.
■ Use only the approved oils from AVENTICS, see chapter „Technical information“.
■ ATEX-certified cylinders can be generated in the Internet configurator.
■ ATEX ID: II 2G c IIB T4 II 2D c IP65 T125°C X
■ The operating temperature range for ATEX-certified cylinders is -20 °C to 50 °C.
■ The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C/120 °C) is fluorocaoutchouc.
■ Further options can be generated in the Internet configurator.

Piston Ø [mm] 16 20 25 32 40
Retracting piston force [N] 95 148 260 435 720
Extracting piston force [N] 127 198 309 507 792
Impact energy [J] 0.15 0.2 0.3 0.5 0.7
Stroke max. [mm] 300 300 300 300 300
Working pressure min./max. [bar] 1 - 10 1 - 10 1 - 10 0.6 - 10 0.6 - 10
Scraper material Polyurethane Polyurethane Polyurethane Polyurethane Polyurethane
Sealing material Nitrile butadiene Nitrile butadiene Nitrile butadiene Polyurethane Polyurethane
rubber rubber rubber

Piston Ø [mm] 50 63 80 100

Retracting piston force [N] 1110 1827 2969 4639
Extracting piston force [N] 1237 1964 3167 4948
Impact energy [J] 1 1.3 1.8 2.5
Stroke max. [mm] 300 300 500 500
Working pressure min./max. [bar] 0.6 - 10 0.6 - 10 0.6 - 10 0.6 - 10
Scraper material Polyurethane Polyurethane Polyurethane Polyurethane
Sealing material Polyurethane Polyurethane Polyurethane Polyurethane

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed informa-
tion
Pneumatics catalog, online PDF, as of 2016-04-07, ©AVENTICS S.à r.l., subject to change
 23
Piston rod cylinder ► Short-stroke and compact cylinders

Compact cylinder, Series KPZ

► Ports: M5 - G 1/8 ► double-acting ► with magnetic piston ► cushioning: elastic ► Piston rod: Internal thread,
Optionally through ► ATEX optional

Piston Ø 16 20 25 32 40
Piston rod thread M4 M6 M6 M8 M8
Ports M5 M5 M5 G 1/8 G 1/8
Stroke 5 0822390000 0822391000 0822392000 0822393000 0822394000
10 0822390001 0822391001 0822392001 0822393001 0822394001
15 0822390002 0822391002 0822392002 0822393002 0822394002
20 0822390003 0822391003 0822392003 0822393003 0822394003
25 0822390004 0822391004 0822392004 0822393004 0822394004
30 0822390005 0822391005 0822392005 0822393005 0822394005
40 0822390006 0822391006 0822392006 0822393006 0822394006
50 0822390007 0822391007 0822392007 0822393007 0822394007
60 0822390008 0822391008 0822392008 0822393008 0822394008
80 - - - 0822393009 0822394009
100 - - - 0822393010 0822394010
Piston Ø 50 63 80 100
Piston rod thread M10 M10 M12 M16
Ports G 1/8 G 1/8 G 1/8 G 1/8
Stroke 5 0822395000 0822396000 0822397000 0822398000
10 0822395001 0822396001 0822397001 0822398001
15 0822395002 0822396002 0822397002 0822398002
20 0822395003 0822396003 0822397003 0822398003
25 0822395004 0822396004 0822397004 0822398004
30 0822395005 0822396005 0822397005 0822398005
40 0822395006 0822396006 0822397006 0822398006
50 0822395007 0822396007 0822397007 0822398007
60 0822395008 0822396008 0822397008 0822398008
80 0822395009 0822396009 0822397009 0822398009
100 0822395010 0822396010 0822397010 0822398010

Configurable product

This product is configurable. Please use our Internet configurator at http://www.aventics.com or contact the
nearest AVENTICS sales office.

Maximum permissible lateral force, Static

00125743

00119758

F stat. = static lateral force S = stroke

X = spacing between force application point and cylinder cover

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed informa-
tion
Pneumatics catalog, online PDF, as of 2016-04-07, ©AVENTICS S.à r.l., subject to change
24
Piston rod cylinder ► Short-stroke and compact cylinders

Compact cylinder, Series KPZ

► Ports: M5 - G 1/8 ► double-acting ► with magnetic piston ► cushioning: elastic ► Piston rod: Internal thread,
Optionally through ► ATEX optional

Maximum permissible lateral force, Dynamic

dyn

00125744

00119760

F dyn. = dynamic lateral force S = stroke

X = spacing between force application point and cylinder cover

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed informa-
tion
Pneumatics catalog, online PDF, as of 2016-04-07, ©AVENTICS S.à r.l., subject to change
 25
Piston rod cylinder ► Short-stroke and compact cylinders

Compact cylinder, Series KPZ

► Ports: M5 - G 1/8 ► double-acting ► with magnetic piston ► cushioning: elastic ► Piston rod: Internal thread,
Optionally through ► ATEX optional

Dimensions
AF E
LW EE LA TG

LJ
MM

6,85 ±0,15

DA

TG
KF

3,65 ±0,15
5,35 ±0,15

RT
DT
RR

LB LB SW
PL PL
BG BG
ZB+S
WH
WH+S
63 - 100
ZA+S
ZB+S
KFx AF

KF

LJ
WH AF

X1 X1 X1 X1
X1 X1 X1 X1
X1
X1
X1

X1

X2
X3

X3
X1

X1

X2
X1
X1

X1

X1

X1 X1 X1 X1
X1 X1 X1 X1

16 20 - 25 32 - 40 50 63 - 100
24274

S = stroke
T = View for sensor groove

Piston Ø AF 1) BG 1) DA DT E EE KF LA LB LJ LW MM
H11 H13 f8
16 10 14.5 10 6 29.5 M5 M4 2.5 3.5 2.5 2.8 8
20 12 15.5 12 7.5 36 M5 M6 2.5 4.5 4.5 3.7 10
10: S<3 mm 2)
25 12 15.5 12 8 40 M5 M6 2.5 4.4 5 3.7 10
10: S<3 mm 2)
32 12 18 14 8.6 50 G 1/8 M8 2.5 5.5 5.1 5 12

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed informa-
tion
Pneumatics catalog, online PDF, as of 2016-04-07, ©AVENTICS S.à r.l., subject to change
26
Piston rod cylinder ► Short-stroke and compact cylinders

Compact cylinder, Series KPZ

► Ports: M5 - G 1/8 ► double-acting ► with magnetic piston ► cushioning: elastic ► Piston rod: Internal thread,
Optionally through ► ATEX optional

Piston Ø AF 1) BG 1) DA DT E EE KF LA LB LJ LW MM
H11 H13 f8
40 12 18 14 9 58 G 1/8 M8 2.5 5.5 9.6 5 12
50 16 24 18 11 68 G 1/8 M10 2.5 2 8.5 4.8 16
12: S<4 mm 2)
63 16 24 18 11 80 G 1/8 M10 2.5 2 17.8 4.8 16
12: S<4 mm 2)
80 20 28 23 14 99 G 1/8 M12 3 1 22.9 6.4 20
15: S<5 mm 2)
100 26 27.5 28 15 120 G 1/8 M16 3 3.5 26.5 6.4 25
21: S<5 mm 2)

Piston Ø PL RT SW TG WH X1 X2 X3 ZA +S ZB +S
16 7.5 M4 7 18 ±0,4 4.5 ‒ ‒ ‒ 38 43 0/+1,4
20 7.5 M5 8 22 ±0,4 5 4.2 ‒ ‒ 38 43 0/+1,4
25 7.5 M5 8 26 ±0,4 5.5 4.5 ‒ ‒ 39 45 0/+1,4
32 8.5 M6 10 32 ±0,5 7 6.5 ‒ ‒ 44 51 0/+1,6
40 8.5 M6 10 42 ±0,5 7 11 ‒ ‒ 45 52 0/+1,6
50 8.5 M8 13 50 ±0,6 7.5 13 4 13 45.5 53 0/+1,6
63 8.5 M8 13 62 ±0,7 8 18 12 21 49 57 0/+2
80 8.3 M10 16 82 ±0,7 9.5 18 16.5 25.5 54.5 64 0/+2
100 9.7 M10 21 103 ±0,7 10.5 20 20 29 66.5 77 0/+2
1) Min.
2) Option: through piston rod
S = stroke

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed informa-
tion
Pneumatics catalog, online PDF, as of 2016-04-07, ©AVENTICS S.à r.l., subject to change
 27
Piston rod cylinder ► Short-stroke and compact cylinders

Compact cylinder, Series KPZ

► Ports: M5 - G 1/8 ► double-acting ► with magnetic piston ► cushioning: elastic ► Piston rod: external thread,
Optionally through (hollow) ► ATEX optional

Standards NFE 49004

Compressed air connection Internal thread

Ambient temperature min./max. -20°C / +80°C

Medium temperature min./max. -20°C / +80°C
Medium Compressed air
Max. particle size 50 µm
Oil content of compressed air 0 mg/m³ - 5 mg/m³
Pressure for determining piston forces 6,3 bar

Materials:
24535
Cylinder tube Aluminum, anodized
Piston rod Stainless steel
Front cover Aluminum
End cover Aluminum
Nut for piston rod Steel, galvanized

Technical Remarks
■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.
■ The oil content of compressed air must remain constant during the life cycle.
■ Use only the approved oils from AVENTICS, see chapter „Technical information“.
■ ATEX-certified cylinders can be generated in the Internet configurator.
■ ATEX ID: II 2G c IIB T4 II 2D c IP65 T125°C X
■ The operating temperature range for ATEX-certified cylinders is -20 °C to 50 °C.
■ The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C/120 °C) is fluorocaoutchouc.
■ Further options can be generated in the Internet configurator.

Piston Ø [mm] 16 20 25 32 40
Retracting piston force [N] 95 148 260 435 720
Extracting piston force [N] 127 198 309 507 792
Impact energy [J] 0.15 0.2 0.3 0.5 0.7
Stroke max. [mm] 300 300 300 300 300
Working pressure min./max. [bar] 1 - 10 1 - 10 1 - 10 0.6 - 10 0.6 - 10
Scraper material Polyurethane Polyurethane Polyurethane Polyurethane Polyurethane
Sealing material Nitrile butadiene Nitrile butadiene Nitrile butadiene Polyurethane Polyurethane
rubber rubber rubber

Piston Ø [mm] 50 63 80 100

Retracting piston force [N] 1110 1837 2969 4639
Extracting piston force [N] 1237 1964 3167 4948
Impact energy [J] 1 1.3 1.8 2.5
Stroke max. [mm] 300 300 500 500
Working pressure min./max. [bar] 0.6 - 10 0.6 - 10 0.6 - 10 0.6 - 10
Scraper material Polyurethane Polyurethane Polyurethane Polyurethane
Sealing material Polyurethane Polyurethane Polyurethane Polyurethane

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed informa-
tion
Pneumatics catalog, online PDF, as of 2016-04-07, ©AVENTICS S.à r.l., subject to change
28
Piston rod cylinder ► Short-stroke and compact cylinders

Compact cylinder, Series KPZ

► Ports: M5 - G 1/8 ► double-acting ► with magnetic piston ► cushioning: elastic ► Piston rod: external thread,
Optionally through (hollow) ► ATEX optional

Piston Ø 16 20 25 32 40
Piston rod thread M8 M10x1,25 M10x1,25 M10x1,25 M10x1,25
Ports M5 M5 M5 G 1/8 G 1/8
Stroke 5 0822390200 0822391200 0822392200 0822393200 0822394200
10 0822390201 0822391201 0822392201 0822393201 0822394201
15 0822390202 0822391202 0822392202 0822393202 0822394202
20 0822390203 0822391203 0822392203 0822393203 0822394203
25 0822390204 0822391204 0822392204 0822393204 0822394204
30 0822390205 0822391205 0822392205 0822393205 0822394205
40 0822390206 0822391206 0822392206 0822393206 0822394206
50 0822390207 0822391207 0822392207 0822393207 0822394207
60 0822390208 0822391208 0822392208 0822393208 0822394208
80 - - - 0822393209 0822394209
100 - - - 0822393210 0822394210
Piston Ø 50 63 80 100
Piston rod thread M12x1,25 M12x1,25 M16x1,5 M20x1,5
Ports G 1/8 G 1/8 G 1/8 G 1/8
Stroke 5 0822395200 0822396200 0822397200 0822398200
10 0822395201 0822396201 0822397201 0822398201
15 0822395202 0822396202 0822397202 0822398202
20 0822395203 0822396203 0822397203 0822398203
25 0822395204 0822396204 0822397204 0822398204
30 0822395205 0822396205 0822397205 0822398205
40 0822395206 0822396206 0822397206 0822398206
50 0822395207 0822396207 0822397207 0822398207
60 0822395208 0822396208 0822397208 0822398208
80 0822395209 0822396209 0822397209 0822398209
100 0822395210 0822396210 0822397210 0822398210

Configurable product

This product is configurable. Please use our Internet configurator at http://www.aventics.com or contact the
nearest AVENTICS sales office.

Maximum permissible lateral force, Static

00125743

00119758

F stat. = static lateral force S = stroke

X = spacing between force application point and cylinder cover

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed informa-
tion
Pneumatics catalog, online PDF, as of 2016-04-07, ©AVENTICS S.à r.l., subject to change
 29
Piston rod cylinder ► Short-stroke and compact cylinders

Compact cylinder, Series KPZ

► Ports: M5 - G 1/8 ► double-acting ► with magnetic piston ► cushioning: elastic ► Piston rod: external thread,
Optionally through (hollow) ► ATEX optional

Maximum permissible lateral force, Dynamic

dyn

00125744

00119760

F dyn. = dynamic lateral force S = stroke

X = spacing between force application point and cylinder cover

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed informa-
tion
Pneumatics catalog, online PDF, as of 2016-04-07, ©AVENTICS S.à r.l., subject to change
30
Piston rod cylinder ► Short-stroke and compact cylinders

Compact cylinder, Series KPZ

► Ports: M5 - G 1/8 ► double-acting ► with magnetic piston ► cushioning: elastic ► Piston rod: external thread,
Optionally through (hollow) ► ATEX optional

Dimensions
AF E A
LW EE LA TG WH

SW*
LJ
MM

MM
DA

TG
KF

KK
E
RT
DT

KV
RR

LB LB 63 - 100 SW KW
PL PL LW*
T
BG BG
6,85 ±0,15
80 - 100

3,65 ±0,15
WH
5,35 ±0,15
LJ

ZA+S
ZB+S

DS
DK
ZB+S A
A WH+S
DS

DS
KK
KK

KK

KK
KV KV
KW KW
WH
X1 X1 X1 X1
X1 X1 X1 X1
X1
X1
X1

X1

X2
X3

X3
X1

X1

X2
X1
X1

X1

X1

X1 X1 X1 X1
X1 X1 X1 X1

16 20 - 25 32 - 40 50 63 - 100
24276

S = stroke
T = View for sensor groove

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed informa-
tion
Pneumatics catalog, online PDF, as of 2016-04-07, ©AVENTICS S.à r.l., subject to change
 31
Piston rod cylinder ► Short-stroke and compact cylinders

Compact cylinder, Series KPZ

► Ports: M5 - G 1/8 ► double-acting ► with magnetic piston ► cushioning: elastic ► Piston rod: external thread,
Optionally through (hollow) ► ATEX optional

Piston Ø A BG 1) DA Ø DK Ø DS DT E EE KK KV KW LA LB
H11 H13
16 20 14.5 10 – – 6 29.5 M5 M8x1,25 13 4 2.5 3.5
20 22 15.5 12 – 3 7.5 36 M5 M10x1,25 16 5 2.5 4.5
25 22 15.5 12 – 3 8 40 M5 M10x1,25 16 5 2.5 4.4
32 22 18 14 – 4.5 8.6 50 G 1/8 M10x1,25 16 5 2.5 5.5
40 22 18 14 – 4.5 9 58 G 1/8 M10x1,25 16 5 2.5 5.5
50 24 24 18 – 6 11 68 G 1/8 M12x1,25 18 6 2.5 2
63 24 24 18 – 6 11 80 G 1/8 M12x1,25 18 6 2.5 2
80 32 28 23 G 1/8 8 14 99 G 1/8 M16x1,5 24 8 3 1
100 40 27.5 28 G 1/4 11.5 15 120 G 1/8 M20x1,5 30 10 3 3.5

Piston Ø LJ LW MM PL RT SW TG WH X1 X2 X3 ZA +S
f8
16 2.5 2.8 8 7.5 M4 7 18 ±0,4 4.5 – – – 38
20 4.5 3.7 10 7.5 M5 8 22 ±0,4 5 4.2 – – 38
25 5 3.7 10 7.5 M5 8 26 ±0,4 5.5 4.5 – – 39
32 5.1 5* 12 8.5 M6 10* 32 ±0,5 7 6.5 – – 44
40 9.6 5* 12 8.5 M6 10* 42 ±0,5 7 11 – – 45
50 8.5 4,8* 16 8.5 M8 13* 50 ±0,6 7.5 13 4 13 45.5
63 17.8 4,8* 16 8.5 M8 13* 62 ±0,7 8 18 12 21 49
80 22.9 6,4* 20 8.3 M10 16* 82 ±0,7 9.5 18 16.5 25.5 54.5
100 26.5 6,4* 25 9.7 M10 21* 103 ±0,7 10.5 20 20 29 66.5

Piston Ø ZB +S
16 43 0/+1,4
20 43 0/+1,4
25 45 0/+1,4
32 51 0/+1,6
40 52 0/+1,6
50 53 0/+1,6
63 57 0/+2
80 64 0/+2
100 77 0/+2
1) Min.
S = stroke
* Hexagonal wrench flats

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed informa-
tion
Pneumatics catalog, online PDF, as of 2016-04-07, ©AVENTICS S.à r.l., subject to change
32
Piston rod cylinder ► Short-stroke and compact cylinders

Compact cylinder, Series KPZ

► Ports: M5 - G 1/8 ► double-acting ► with magnetic piston ► cushioning: elastic ► Piston rod: non-rotating, with
front plate, Optionally through

Standards NFE 49004

Compressed air connection Internal thread

Ambient temperature min./max. -20°C / +80°C

Medium temperature min./max. -20°C / +80°C
Medium Compressed air
Max. particle size 50 µm
Oil content of compressed air 0 mg/m³ - 5 mg/m³
Pressure for determining piston forces 6,3 bar

Materials:
24536
Cylinder tube Aluminum, anodized
Piston rod Stainless steel
Front cover Aluminum
End cover Aluminum
Front plate Aluminum, anodized

Technical Remarks
■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.
■ The oil content of compressed air must remain constant during the life cycle.
■ Use only the approved oils from AVENTICS, see chapter „Technical information“.
■ The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C/120 °C) is fluorocaoutchouc.
■ Further options can be generated in the Internet configurator.

Piston Ø [mm] 16 20 25 32 40
Retracting piston force [N] 95 148 260 435 720
Extracting piston force [N] 127 198 309 507 792
Impact energy [J] 0.15 0.2 0.3 0.5 0.7
Stroke max. [mm] 300 300 300 300 300
Working pressure min./max. [bar] 1 - 10 1 - 10 1 - 10 0.6 - 10 0.6 - 10
Scraper material Polyurethane Polyurethane Polyurethane Polyurethane Polyurethane
Sealing material Nitrile butadiene Nitrile butadiene Nitrile butadiene Polyurethane Polyurethane
rubber rubber rubber

Piston Ø [mm] 50 63 80 100

Retracting piston force [N] 1110 1837 2969 4639
Extracting piston force [N] 1237 1964 3167 4948
Impact energy [J] 1 1.3 1.8 2.5
Stroke max. [mm] 300 300 300 300
Working pressure min./max. [bar] 0.6 - 10 0.6 - 10 0.6 - 10 0.6 - 10
Scraper material Polyurethane Polyurethane Polyurethane Polyurethane
Sealing material Polyurethane Polyurethane Polyurethane Polyurethane

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed informa-
tion
Pneumatics catalog, online PDF, as of 2016-04-07, ©AVENTICS S.à r.l., subject to change
 33
Piston rod cylinder ► Short-stroke and compact cylinders

Compact cylinder, Series KPZ

► Ports: M5 - G 1/8 ► double-acting ► with magnetic piston ► cushioning: elastic ► Piston rod: non-rotating, with
front plate, Optionally through

Piston Ø 16 20 25 32 40
Ports M5 M5 M5 G 1/8 G 1/8
Stroke 5 0822390600 0822391600 0822392600 0822393600 0822394600
10 0822390601 0822391601 0822392601 0822393601 0822394601
15 0822390602 0822391602 0822392602 0822393602 0822394602
20 0822390603 0822391603 0822392603 0822393603 0822394603
25 0822390604 0822391604 0822392604 0822393604 0822394604
30 0822390605 0822391605 0822392605 0822393605 0822394605
40 0822390606 0822391606 0822392606 0822393606 0822394606
50 0822390607 0822391607 0822392607 0822393607 0822394607
60 0822390608 0822391608 0822392608 0822393608 0822394608
80 - - - 0822393609 0822394609
100 - - - 0822393610 0822394610
Piston Ø 50 63 80 100
Ports G 1/8 G 1/8 G 1/8 G 1/8
Stroke 5 0822395600 0822396600 0822397600 0822398600
10 0822395601 0822396601 0822397601 0822398601
15 0822395602 0822396602 0822397602 0822398602
20 0822395603 0822396603 0822397603 0822398603
25 0822395604 0822396604 0822397604 0822398604
30 0822395605 0822396605 0822397605 0822398605
40 0822395606 0822396606 0822397606 0822398606
50 0822395607 0822396607 0822397607 0822398607
60 0822395608 0822396608 0822397608 0822398608
80 0822395609 0822396609 0822397609 0822398609
100 0822395610 0822396610 0822397610 0822398610

Configurable product

This product is configurable. Please use our Internet configurator at http://www.aventics.com or contact the
nearest AVENTICS sales office.

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed informa-
tion
Pneumatics catalog, online PDF, as of 2016-04-07, ©AVENTICS S.à r.l., subject to change
34
Piston rod cylinder ► Short-stroke and compact cylinders

Compact cylinder, Series KPZ

► Ports: M5 - G 1/8 ► double-acting ► with magnetic piston ► cushioning: elastic ► Piston rod: non-rotating, with
front plate, Optionally through

Maximum permissible lateral force, Static

F stat [N]

150

00125745
100

100
80
63
50 50
32/40
25
20
16

50 100 150
S + X [mm]
00119757

F stat. = static lateral force

X = spacing between force application point and cylinder cover
S = stroke

Maximum permissible lateral force, Dynamic

00125746

00119761

F dyn. = dynamic lateral force

X = spacing between force application point and cylinder cover
S = stroke

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed informa-
tion
Pneumatics catalog, online PDF, as of 2016-04-07, ©AVENTICS S.à r.l., subject to change
 35
Piston rod cylinder ► Short-stroke and compact cylinders

Compact cylinder, Series KPZ

► Ports: M5 - G 1/8 ► double-acting ► with magnetic piston ► cushioning: elastic ► Piston rod: non-rotating, with
front plate, Optionally through

Max. permissible torque

X
00125752

00119762

M = max. permissible torque

X = spacing between force application point and cylinder cover

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed informa-
tion
Pneumatics catalog, online PDF, as of 2016-04-07, ©AVENTICS S.à r.l., subject to change
36
Piston rod cylinder ► Short-stroke and compact cylinders

Compact cylinder, Series KPZ

► Ports: M5 - G 1/8 ► double-acting ► with magnetic piston ► cushioning: elastic ► Piston rod: non-rotating, with
front plate, Optionally through

Dimensions
E
BG BG G
LB LB BC
LM DG
DT
RR

Ø DA

TG
FA
G
E
LJ

FB
EE LA
PL PL FA
WH TG
ZB+S
ZA+S 63 - 100
WH+S
ZB+S

T
6,85 ±0,15

LJ
3,65 ±0,15

5,35 ±0,15
KF
MM

AF

X1 X1 X1 X1
X1 X1 X1 X1
X1
X1
X1

X1

X2
X3

X3
X1

X1

X2
X1
X1

X1

X1

X1 X1 X1 X1
X1 X1 X1 X1

16 20 - 25 32 - 40 50 63 - 100
24277

S = stroke
T = View for sensor groove without guide plate

Piston Ø AF 1) BC BG 1) DA DG H13 DT E EE FA ±0,1 FB G KF

H11 H13
16 10 M3 14.5 10 3 6 29.5 M5 9.9 20 19 M4
20 12 M4 15.5 12 4 7.5 36 M5 12 24 25 M6
10: S<3 mm 2)
25 12 M5 15.5 12 5 8 40 M5 15.6 30 27 M6
10: S<3 mm 2)

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed informa-
tion
Pneumatics catalog, online PDF, as of 2016-04-07, ©AVENTICS S.à r.l., subject to change
 37
Piston rod cylinder ► Short-stroke and compact cylinders

Compact cylinder, Series KPZ

► Ports: M5 - G 1/8 ► double-acting ► with magnetic piston ► cushioning: elastic ► Piston rod: non-rotating, with
front plate, Optionally through

Piston Ø AF 1) BC BG 1) DA DG H13 DT E EE FA ±0,1 FB G KF

H11 H13
32 12 M5 18 14 5 8.6 50 G 1/8 19.8 38 32 M8
40 12 M5 18 14 5 9 58 G 1/8 23.3 44 42 M8
50 16 M6 24 18 6 11 68 G 1/8 29.7 54 50 M10
12: S<4 mm 2)
63 16 M6 24 18 6 11 80 G 1/8 35.4 62 62 M10
12: S<4 mm 2)
80 20 M8 28 23 8 14 99 G 1/8 46 80 82 M12
15: S<3 mm 2)
100 26 M10 27.5 28 10 15 120 G 1/8 56.6 100 103 M16
21: S<5 mm 2)

Piston Ø LA LB LJ LM MM PL RT TG WH X1 X2 X3 ZA +S
f8
16 2.5 3.5 2.5 6 8 7.5 M4 18 ±0,4 4.5 – – – 38
20 2.5 4.5 4.5 8 10 7.5 M5 22 ±0,4 5 4.2 – – 38
25 2.5 4.4 5 8 10 7.5 M5 26 ±0,4 5.5 4.5 – – 39
32 2.5 5.5 5.1 10 12 8.5 M6 32 ±0,5 7 6.5 – – 44
40 2.5 5.5 9.6 10 12 8.5 M6 42 ±0,5 7 11 – – 45
50 2.5 2 8.5 12 16 8.5 M8 50 ±0,6 7.5 13 4 13 45.5
63 2.5 2 17.8 12 16 8.5 M8 62 ±0,7 8 18 12 21 49
80 3 1 22.9 14 20 8.3 M10 82 ±0,7 9.5 18 16.5 25.5 54.5
100 3 3.5 26.5 14 25 9.7 M10 103 ±0,7 10.5 20 20 29 66.5

Piston Ø ZB +S
16 43 0/+1,4
20 43 0/+1,4
25 45 0/+1,4
32 51 0/+1,6
40 52 0/+1,6
50 53 0/+1,6
63 57 0/+2
80 64 0/+2
100 77 0/+2
1) Min.
2) Option: through piston rod
S = stroke

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed informa-
tion
Pneumatics catalog, online PDF, as of 2016-04-07, ©AVENTICS S.à r.l., subject to change
38
Piston rod cylinder ► Short-stroke and compact cylinders

Series KPZ
Accessories

Accessories overview

Overview drawing
JP2
MF1/2 MP2
MP4

AA4 AA4
MP2 AB3

MP4*

AT4
MS1
MT5/6
KPZ

ST6

SM6

MF1/2

MS1
MR9
AP6 MT5/6
PM7 SN3
AB3
MR9
AP2 AT4

PM5

00136563

* Available for installation on KPZ for cylinder diameters 16 - 25 mm

NOTE:
This overview drawing is only for orientation to see where the various accessory parts can be fastened to the cylinder. The illustration has been simplified for
this purpose. It is thus not possible to derive the dimensions from this overview.

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed informa-
tion
Pneumatics catalog, online PDF, as of 2016-04-07, ©AVENTICS S.à r.l., subject to change
 39
Piston rod cylinder ► Short-stroke and compact cylinders

Series KPZ
Accessories

Foot mounting, Series MS1

TG

TG

R
L1

AT
L1

L2
d
TR TR AB
E E AU AO

16 20 - 320 00126387
00105808

Scope of delivery: 2 foot mountings incl. mounting screws

Part No. Piston Ø For series ØAB AO AT AU ±0,2 Ød E L1 L2

1821332053 16 KPZ 5.5 5 3 13 4.5 29 35.5 13
CCI
1827002284 20 KPZ 6.6 6 4 16 5.4 36 22 16
CCI
1827002285 25 KPZ 6.6 6 4 16 5.4 40 23 17
CCI
1827002286 32 KPZ 6.6 8 5 18 6.6 50 24 16
1827002287 40 KPZ 9 8 5 20 6.6 60 29.5 21.5
1827002288 50 KPZ 9 8 6 24 9 68 30 22
1827002289 63 KPZ 11 12 6 27 9 84 39 28.5
1827002290 80 KPZ 11 12 8 30 11 102 36.5 24.5
1827002291 100 KPZ 13.5 12 8 33 11 123 38.5 26.5

Part No. Piston Ø R TG TR

1821332053 16 8 18 ±0,2 18
1827002284 20 10 22 ±0,2 22
1827002285 25 11 26 ±0,2 26
1827002286 32 – 32 32
1827002287 40 – 42 42
1827002288 50 – 50 50
1827002289 63 – 62 62
1827002290 80 – 82 82
1827002291 100 – 103 103

Material: Steel
Surface: galvanized

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed informa-
tion
Pneumatics catalog, online PDF, as of 2016-04-07, ©AVENTICS S.à r.l., subject to change
40
Piston rod cylinder ► Short-stroke and compact cylinders

Series KPZ
Accessories

Flange mounting, Series MF1, MF2

FB

d1
UF

TG
TF

d2
d
R L4
TG MF
00105812
E 16390_a

Scope of delivery: flange mounting incl. mounting screws

Part No. Piston Ø d Ø d1 Ø d2 E Ø FB L4 MF R TF TG

1821038241 16 10 4.5 10 29 5.5 5.6 10 – 43 18
1827002292 20 12 5.5 10 36 6.6 4.6 10 – 55 22
1827002293 25 12 5.5 10 40 6.6 4.6 10 – 60 26
1827002294 32 14 6.6 11 50 7 3.6 10 32 65 32
1827002295 40 14 6.6 11 60 9 3.6 10 36 82 42
1827002296 50 18 9 15 68 9 3.4 12 45 90 50
1827002297 63 18 9 15 87 9 6.4 15 50 110 62
1827002298 80 23 11 18 107 12 4.4 15 63 135 82
1827002299 100 28 11 18 128 14 4.4 15 75 163 103

Part No. UF Weight

[kg]
1821038241 55 0.05
1827002292 70 0.18
1827002293 76 0.23
1827002294 80 0.23
1827002295 102 0.45
1827002296 110 0.66
1827002297 130 1.27
1827002298 160 1.9
1827002299 190 2.7

Material: Steel
Surface: galvanized

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed informa-
tion
Pneumatics catalog, online PDF, as of 2016-04-07, ©AVENTICS S.à r.l., subject to change
 41
Piston rod cylinder ► Short-stroke and compact cylinders

Series KPZ
Accessories

Clevis mounting, Series AB3

00106429

Scope of delivery: clevis mounting incl. pivot pins

00105159

Part No. Piston Ø CM Ø CK CL FL FO MR ØT TB UH

1827001446 12, 16 12,1 6 18,1 27 2,0 7 5,5 15 25
1827001445 20, 25 16,1 8 24,1 30 4,0 10 6,6 20 32

Material: Steel
Surface: galvanized

Rear eye, Series MP4

► for clevis mounting MP2 and AB3

P523_024
00126403_a

Scope of delivery: clevis incl. mounting screws

Part No. Piston Ø CD H9 ØD Ø D1 E EW FL ±0,2 I ±0,5 L 1) L1 1) MR 2)

1825805368 16 6 10 H13 4.5 27 12 –0,2/–0,6 16 2.6 10 3 6
1827002300 20 8 12 H13 5.5 34 16 –0,2/–0,6 20 2.6 14 3 8
1827002301 25 8 12 H13 5.5 40 16 –0,2/–0,6 20 2.6 14 3 8
1827001283 32 10 30 H11 6.6 48 26 –0,2/–0,6 22 5.5 12 4.5 10
1827001284 40 12 35 H11 6.6 53 28 –0,2/–0,6 25 5.5 15 4.5 12
1827001285 50 12 40 H11 9 63 32 –0,2/–0,6 27 6.5 15 4.5 12
1827020086 63 16 45 H11 9 73 40 –0,2/–0,6 32 6.5 20 4.5 16
1827001287 80 16 45 H11 11 98 50 –0,2/–0,6 36 10 20 4.5 16
1827001288 100 20 55 H11 11 115 60 –0,2/–0,6 41 10 25 4.5 20

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed informa-
tion
Pneumatics catalog, online PDF, as of 2016-04-07, ©AVENTICS S.à r.l., subject to change
42
Piston rod cylinder ► Short-stroke and compact cylinders

Series KPZ
Accessories

Part No. TG Standardiza- Note

tion
1825805368 18 ±0,2 - 3)
1827002300 22 ±0,4 ISO 21287 4) 6)
1827002301 26 ±0,4 ISO 21287 4) 6)
1827001283 32,5 ±0,2 ISO 15552 5)
1827001284 38 ±0,2 ISO 15552 5)
1827001285 46,5 ±0,2 ISO 15552 5)
1827020086 56,5 ±0,2 ISO 15552 5)
1827001287 72 ±0,2 ISO 15552 5)
1827001288 89 ±0,2 ISO 15552 5)
1) Min.
2) Max.
3) Material: Die-cast aluminum
4) Material: Steel
5) Material: Aluminum (forged)
6) Surface: galvanized

Clevis mounting, Series MP2

► for Series KPZ

00130359

Scope of delivery: clevis mounting incl. mounting screws

P523_025

Part No. Piston Ø For series CB Ø CD E FL ±0,2 L 1) MR 2) UB TG

H14 H9 h13
1827002302 32 KPZ 26 10 48 22 13 10 45 32 ±0,5
1827002303 40 KPZ 28 12 58 25 16 12.5 52 42 ±0,5
1827002304 50 KPZ 32 12 66 27 16 12.5 60 50 ±0,6
1827002305 63 KPZ 40 16 83 32 21 15 70 62 ±0,6
1827002306 80 KPZ 50 16 102 36 23 15 90 82 ±0,7
1827002307 100 KPZ 60 20 123 41 26 20 110 103 ±0,7
1) Min.
2) Max.
Material: Steel
Surface: galvanized

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed informa-
tion
Pneumatics catalog, online PDF, as of 2016-04-07, ©AVENTICS S.à r.l., subject to change
 43
Piston rod cylinder ► Short-stroke and compact cylinders

Series KPZ
Accessories

Bolts, AA4
Fig. 1

L EL L6
Ød

EK
Fig. 2
00105158

L6 EL L6
Ød

EK
1) 21294

Scope of delivery: pivot pins incl. circlips

1) circlip DIN 471

Part No. Piston Ø Ø d 2) EK EL L 2) L6 2) Weight Fig.

e8 [kg]
1823120020 32 20 10 45,2 +0,3 3.5 9 0.03 Fig. 1
1823120021 40 22 12 52,2 +0,3 4 9 0.05 Fig. 1
1823120022 50 22 12 60,2 +0,3 4 9 0.06 Fig. 1
1823120023 63 28 16 70,2 +0,3 4.5 11 0.12 Fig. 1
1823120024 80 28 16 90,2 +0,3 4.5 11 0.15 Fig. 1
1823120025 100 38 20 110,2 +0,3 5 11 0.29 Fig. 1
2) Max.
Material: Steel
Surface: galvanized

Trunnion mounting, front or rear, Series MT5, MT6

00128925
00126407

The delivered product may vary from that in the illustration.

Scope of delivery: trunnion mounting incl. mounting screws

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed informa-
tion
Pneumatics catalog, online PDF, as of 2016-04-07, ©AVENTICS S.à r.l., subject to change
44
Piston rod cylinder ► Short-stroke and compact cylinders

Series KPZ
Accessories

Part No. Piston Ø For series Ød Ø d1 Ø d2 L1 TD e9 TG ±0,2 TK TL h14 TM h14

H11
1825805360 20 CCI 18 5.5 10 8 12 22 14 12 38
KPZ
1825805361 25 CCI 22 5.5 10 8 12 26 14 12 42
KPZ
1825805362 32 - 32 6.6 10.5 7 12 32 14 12 52
1825805363 40 - 46 6.6 11 12 16 42 19 16 63
1825805364 50 - 53 9 14 10 16 50 19 16 75
1825805365 63 - 69 9 15 15 20 62 24 20 90
1825805366 80 - 87 11 18 13 20 82 24 20 110
1825805367 100 - 107 11 18 18 25 103 29 25 132

Part No. Piston Ø UW

1825805360 20 35
1825805361 25 39
1825805362 32 46
1825805363 40 59
1825805364 50 69
1825805365 63 84
1825805366 80 102
1825805367 100 125

Material: Nodular graphite iron

Surface: galvanized

Bearing brackets MT4, MT5, MT6, Series AT4

► Cylinder mounting in accordance with ISO 15552 ► for Series CCI, ICL, KPZ, PRA, TRB
ØHB
A A-A ØCR
FN
FK

A
00105163 TH
UL
NH

00105221

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed informa-
tion
Pneumatics catalog, online PDF, as of 2016-04-07, ©AVENTICS S.à r.l., subject to change
 45
Piston rod cylinder ► Short-stroke and compact cylinders

Series KPZ
Accessories

Part No. Piston Ø For series UL NH TH C CR HB FN FK

H9 H13
1827001603 20, 25, 32 CCI 46 18 32 ±0,2 10.5 12 6.6 30 15 ±0,1
ICL
KPZ
PRA
TRB
1827001604 40, 50 CCI 55 21 36 ±0,2 12 16 9 36 18 ±0,1
ICL
KPZ
PRA
TRB
1827001605 63, 80 CCI 65 23 42 ±0,2 13 20 11 40 20 ±0,1
ICL
KPZ
PRA
TRB
1827001606 100, 125 CCI 75 28.5 50 ±0,2 16 25 14 50 25 ±0,1
ICL
KPZ
PRA
TRB

Part No. Piston Ø Plain bearing Delivery

quantity
[Piece]
1827001603 20, 25, 32 Sintered bronze 2
1827001604 40, 50 Sintered bronze 2
1827001605 63, 80 Sintered bronze 2
1827001606 100, 125 Sintered bronze 2

Material: Steel
Surface: galvanized

Intermediate flange, Series JP2

► for multi-position cylinders ► for Series CCI, KPZ, KPZ
B
E

IM0043337

A
C
00105190

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed informa-
tion
Pneumatics catalog, online PDF, as of 2016-04-07, ©AVENTICS S.à r.l., subject to change
46
Piston rod cylinder ► Short-stroke and compact cylinders

Series KPZ
Accessories

Part No. Piston Ø For series A B C Md E

[Nm]
1)
1827020290 16 CCI 12.5 7 – 2.5 28.4
KPZ
1827020267 20 CCI 12.5 8 – 4 35
KPZ
1827020268 25 CCI 13 8 4 4 40
KPZ
1827020269 32 CCI 14.5 10 5 4 50
KPZ
1827020270 40 CCI 14.5 10 5 4 57.1
KPZ
1827020271 50 CCI 14.5 13 6 8 67.4
KPZ
1827020272 63 CCI 14.5 13 6 8 80
KPZ
1827020273 80 KPZ 16.5 16 – 16 98.4
1827020274 100 KPZ 19.5 16 – 16 120
1) torque
Material: Aluminum

Mounting kit

00111998

00103610

Part No. Ø mm Material Material Surface Weight

[kg]
Screws Screws
1827020275 16–100 Brass Steel galvanized 0.02

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed informa-
tion
Pneumatics catalog, online PDF, as of 2016-04-07, ©AVENTICS S.à r.l., subject to change
 47
Piston rod cylinder ► Short-stroke and compact cylinders

Series KPZ
Accessories

Nut for piston rod, Series MR9

KK
00105168

KV KW 00105192

Part No. KK KV KW Material Surface Weight

[kg]
1823300034 M8 13 4 Steel galvanized 0.005
1823300020 M10x1,25 17 6 Steel galvanized 0.01
8103190344 M12x1,25 19 6 Steel galvanized 0.012

Rod clevis, Series AP2

► galvanized steel
CK
BL

CM

00105171

LE

KK
ER CE
ØD1
CL

00126410_a

Part No. KK BL CE ØCK CL CM ØD1 ER LE Material

e11

1822122010 M8 21,5 32 8 16 8 14 10 16 Steel

1822122024 M10x1,25 26 40 10 20 10 18 12 20 Steel
1822122025 M12x1,25 31 48 12 24 12 20 14 24 Steel
1822122005 M16x1,5 39 64 16 32 16 26 19 32 Steel
1822122004 M20x1,5 50 80 20 40 20 34 20 40 Steel

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed informa-
tion
Pneumatics catalog, online PDF, as of 2016-04-07, ©AVENTICS S.à r.l., subject to change
48
Piston rod cylinder ► Short-stroke and compact cylinders

Series KPZ
Accessories

Part No. Surface Weight

[kg]
1822122010 galvanized 0.05
1822122024 galvanized 0.1
1822122025 galvanized 0.16
1822122005 galvanized 0.4
1822122004 galvanized 0.7

Ball eye rod end with flange, Series AP6

► Steel
CE

ER

AA
SW
ØCN

z z

00105172
EN

EU

KK
LF
AV 00126602

Part No. KK AA AV CE Ø CN EN –0,1 ER EU LF SW Z [°]

min. H7 max. max.

1822124002 M8 16 12 36 8 12 12 9.5 12 14 4
1822124003 M10x1,25 19 15 43 10 14 14 11.5 14 17 4
1822124004 M12x1,25 22 18 50 12 16 16 12.5 16 19 4
1822124005 M16x1,5 27 24 64 16 21 21 15.5 21 22 4
1822124006 M20x1,5 34 30 77 20 25 25 18.5 25 30 4

Part No. Material Surface Weight

[kg]
1822124002 Steel galvanized 0.05
1822124003 Steel galvanized 0.07
1822124004 Steel galvanized 0.12
1822124005 Steel galvanized 0.21
1822124006 Steel galvanized 0.38

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed informa-
tion
Pneumatics catalog, online PDF, as of 2016-04-07, ©AVENTICS S.à r.l., subject to change
 49
Piston rod cylinder ► Short-stroke and compact cylinders

Series KPZ
Accessories

Rod clevis, Series PM6

► galvanized steel

00105173

00105197

Scope of delivery incl. bolt

Part No. KK b1 B12 b2 d12 b3 b4 +0,2 d3 e +0,3 EK f g L1 L2

1822122032 M10x1,25 14 28 20 3.3 17 11.5 10 0.7 20 90 78

1822122033 M12x1,25 16 30 25 4.3 19 12 12 1 26 108 92
1822122034 M16x1,5 21 40 35 4.3 24 14 16 1 31 129 108
1822122035 M20x1,5 25 50 40 4.3 30 16 20 1 43 156 131

Part No. L3 L4 +1 L6 t +0,2 Material Surface

1822122032 53 50 35 3 Steel galvanized

1822122033 58 55 39 3 Steel galvanized
1822122034 65 62 50 3 Steel galvanized
1822122035 73 69 60 3 Steel galvanized

Flexible spherical coupling, Series PM5

00105169

D300_029

* Angle joint
** Radial joint from 0,5 - 2 mm
Axial play set to 0.05 to 0.2 mm

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed informa-
tion
Pneumatics catalog, online PDF, as of 2016-04-07, ©AVENTICS S.à r.l., subject to change
50
Piston rod cylinder ► Short-stroke and compact cylinders

Series KPZ
Accessories

Part No. KK B1 Ø D1 D2 Ø D3 F L ±2 L2 L3 ±1 SW1 SW2 SW3

1826409001 M8 4 12.5 20 8 14.5 55 15 5 10 6 13

1826409002 M10x1,25 6 21.5 34 14 23 73 20 7.5 19 12 17
1826409003 M12x1,25 7 21.5 34 14 28 77 24 13 19 12 19
1826409004 M16x1,5 8 33.5 47 22 32 108 32 9 30 19 24
1826409005 M20x1,5 10 33.5 47 22 42 122 40 19 30 19 30

Part No. SW4 Material Surface Weight

[kg]
1826409001 17 Steel galvanized 0.05
1826409002 30 Steel galvanized 0.21
1826409003 30 Steel galvanized 0.21
1826409004 41 Steel galvanized 0.65
1826409005 41 Steel galvanized 0.68

Flexible plate coupling, Series PM7

00105194

00105170

Part No. KK a1 a2 d1 h11 d6 H13 d7 H13 e1 H13 e2 h1 t2 H

1827001629 M10x1,25 60 37 20 6.6 11 36 ±0,15 23 ±0,15 15 7 24

1827001630 M12x1,25 60 56 25 9 15 42 ±0,2 38 ±0,2 20 9 30
1827001631 M16x1,5 80 80 30 11 18 58 ±0,2 58 ±0,2 20 11 32
1827001632 M20x1,5 90 90 40 14 20 65 ±0,3 65 ±0,3 20 13 35

Part No. SW Tightening Axial radial Material Surface Weight

torque for play play
the coupling
pin Ma ± 5%
[Nm] [min./ [min./ [kg]
max.] max.]
1827001629 17 17 0.4 1 Steel galvanized 0.3
1827001630 19 29 0.4 1 Steel galvanized 0.4
1827001631 24 71 0.4 1 Steel galvanized 0.9
1827001632 36 138 0.4 1 Steel galvanized 1.15

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed informa-
tion
Pneumatics catalog, online PDF, as of 2016-04-07, ©AVENTICS S.à r.l., subject to change
 51
Piston rod cylinder ► Short-stroke and compact cylinders

Series KPZ
Accessories

Sensor, Series ST6

► 6 mm T-slot ► with cable ► open cable ends, 2-pin, open cable ends, 3-pin

Certificates CE declaration of conformity

cULus
Ambient temperature min./max. -30°C / +80°C
Protection class IP65, IP67, IP69K
Switching point precision [mm] ±0,1
Switching logic NO (make contact)
Switching capacity Reed, 2-pin: max. 10 W
Reed, 3-pin: max. 6 W
LED status display Yellow
Vibration resistance 10 - 55 Hz, 1 mm
Shock resistance 30 g / 11 ms

24712 Materials:
Housing Polyamide
Cable sheath Polyurethane
Locking screw Stainless steel

Technical Remarks
■ No cULus certification for 230 V variant.

Type of con- Cable length DC operating Operational Voltage drop U DC switching Part No.
tact voltage voltage AC at Imax current, max.
min./max. min./max.
[m] [V] [V] [V] [A]
BN

BU RL
Reed 3 10 / 230 10 / 230 I*Rs 0,13 R412022866

BN
+/–/~
3 R412022869
Reed 5 10 / 30 10 / 30 I*Rs 0,3 R412022870
BK RL

BU
–/+/~

10 R412022871
BN
+
3 R412022853
electronic PNP 5 10 / 30 - ≤ 2,5 0,13 R412022855
BK RL

PNP BU
–

10 R412022857
BN
+
3 R412022849
electronic NPN 10 / 30 - ≤ 2,5 0,13
BK RL

NPN BU
– 5 R412022850

Part No. AC switching Max. switching Operating current, Operating current, Fig. Note
current, max. frequency not switched switched
[A] [kHz] [mA] [mA]
R412022866 0,13 < 0,4 - - Fig. 1 1); 3)
R412022869
R412022870 0,5 < 0,4 - - Fig. 2 2); 3)
R412022871
R412022853
R412022855 - < 1,0 < 8 mA < 30 mA Fig. 2 2); 4)
R412022857
R412022849
- < 1,0 < 8 mA < 30 mA Fig. 2 2); 4)
R412022850
1) interfaces: open cable ends; 2-pin
2) interfaces: open cable ends; 3-pin
3) Protected against polarity reversal
4) short circuit resistant / Protected against polarity reversal

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed informa-
tion
Pneumatics catalog, online PDF, as of 2016-04-07, ©AVENTICS S.à r.l., subject to change
52
Piston rod cylinder ► Short-stroke and compact cylinders

Series KPZ
Accessories

Fig. 1
5,7 32,5 L
4,8 2,7
1* 2*
BN
5,8

BU
11,2 3 x 0,14 mm2
30

24,75
0,82

2,9
3* 2,5
SW

24619

1* = switching point 2* = locking screw 3* = LED window, transparent

L = cable length
BN=brown, BU=blue

Fig. 2
5,7 29,5 L
4,8 2,7
1* 2*
BN
5,8

BU
BK
X 3 x 0,14 mm2
30

21,75
0,82
2,9

3* 2,5
SW

24620

1* = switching point 2* = locking screw 3* = LED window, transparent

L = cable length
BN = brown, BK = black, BU = blue
X = electronic: 11,6 mm, Reed: 8,3 mm

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed informa-
tion
Pneumatics catalog, online PDF, as of 2016-04-07, ©AVENTICS S.à r.l., subject to change
 53
Piston rod cylinder ► Short-stroke and compact cylinders

Series KPZ
Accessories

Sensor, Series ST6

► 6 mm T-slot ► with cable ► Plug, M8, 3-pin, with knurled screw

Certificates CE declaration of conformity

cULus
Ambient temperature min./max. -30°C / +80°C
Protection class IP65, IP67
Switching point precision [mm] ±0,1
DC operating voltage min./max. 10 - 30
Switching logic NO (make contact)
Switching capacity Reed, 3-pin: max. 6 W
LED status display Yellow
Vibration resistance 10 - 55 Hz, 1 mm
Shock resistance 30 g / 11 ms

24713
Materials:
Housing Polyamide
Locking screw Stainless steel

Type of Cable Cable length Operational Voltage drop DC switching AC switching Part No.
contact sheath voltage AC U at Imax current, max. current, max.
min./max.
[m] [V] [V] [A] [A]
Polyure-
0.3 R412022873
thane
1 BN
+/–/~
Polyvinyl
Reed 0.3 10 / 30 I*Rs 0,3 0,5 R412022875
4 BK RL

3 BU
–/+/~
chloride
Polyure-
0.5 R412022874
thane
Polyure-
0.3 R412022859
thane
Polyvinyl
1 BN
+

electronic PNP 0.3 - ≤ 2,5 0,13 - R412022862

4 BK RL

PNP 3 BU
–
chloride
Polyure-
0.5 R412022861
thane
Polyure-
1 BN
+

electronic NPN 0.3 - ≤ 2,5 0,13 - R412022852

4 BK RL

NPN 3 BU
–
thane

Part No. Max. switching frequency Operating current, not Operating current, Note
switched switched
[kHz] [mA] [mA]
R412022873
R412022875 < 0,4 - - 1)
R412022874
R412022859
R412022862 < 1,0 < 8 mA < 30 mA 2)
R412022861
R412022852 < 1,0 < 8 mA < 30 mA 2)
1) Protected against polarity reversal
2) short circuit resistant / Protected against polarity reversal
interfaces: Plug; M8; 3-pin; with knurled screw

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed informa-
tion
Pneumatics catalog, online PDF, as of 2016-04-07, ©AVENTICS S.à r.l., subject to change
54
Piston rod cylinder ► Short-stroke and compact cylinders

Series KPZ
Accessories

Dimensions
29,5 L
5,7
2,7 36 - 41,5 1 4 3
4,8
1* 2*
5,8

M8
X

21,75
0,82
2,9

2,5
3* SW

24622

1* = switching point 2* = locking screw 3* = LED window, transparent

L = cable length
X = electronic: 11,6 mm, Reed: 8,3 mm
Pin assignment: 1 = (+), 3 = (-), 4 = (OUT)

Sensor, Series ST6

► 6 mm T-slot ► with cable ► Plug, M8, 3-pin

Certificates CE declaration of conformity

cULus
Ambient temperature min./max. -30°C / +80°C
Protection class IP65, IP67
Switching point precision [mm] ±0,1
DC operating voltage min./max. 10 - 30
Switching logic NO (make contact)
Switching capacity Reed, 2-pin: max. 10 W
Reed, 3-pin: max. 6 W
LED status display Yellow
Vibration resistance 10 - 55 Hz, 1 mm
Shock resistance 30 g / 11 ms
24742

Materials:
Housing Polyamide
Cable sheath Polyurethane
Locking screw Stainless steel

Type of con- Cable length Operational Voltage drop U DC switching AC switching Part No.
tact voltage AC at Imax current, max. current, max.
min./max.
[m] [V] [V] [A] [A]
BN

BU RL
Reed 0.3 10 / 30 I*Rs 0,13 0,13 R412022868

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed informa-
tion
Pneumatics catalog, online PDF, as of 2016-04-07, ©AVENTICS S.à r.l., subject to change
 55
Piston rod cylinder ► Short-stroke and compact cylinders

Series KPZ
Accessories

Type of con- Cable length Operational Voltage drop U DC switching AC switching Part No.
tact voltage AC at Imax current, max. current, max.
min./max.
[m] [V] [V] [A] [A]
BN
+/–/~

Reed 0.3 10 / 30 I*Rs 0,3 0,5 R412022872

BK RL

BU
–/+/~

1 BN
+

electronic PNP 0.3 - ≤ 2,5 0,13 - R412022858

4 BK RL

PNP 3 BU
–

1 BN
+

electronic NPN 0.3 - ≤ 2,5 0,13 - R412022851

4 BK RL

NPN 3 BU
–

Part No. Max. switching frequency Operating current, not Operating current, Note
switched switched
[kHz] [mA] [mA]
R412022868 < 0,4 - - 1)
R412022872 < 0,4 - - 1)
R412022858 < 1,0 < 8 mA < 30 mA 2)
R412022851 < 1,0 < 8 mA < 30 mA 2)
1) Protected against polarity reversal
2) short circuit resistant / Protected against polarity reversal
interfaces: Plug; M8; 3-pin

Dimensions
29,5 L
5,7
2,7 29 - 37 1 4 3
4,8
1* 2*
5,8

M8
X

21,75
0,82
2,9

2,5
3* SW

24621

1* = switching point 2* = locking screw 3* = LED window, transparent

L = cable length
X = electronic: 11,6 mm, Reed: 8,3 mm
Pin assignment: 1 = (+), 3 = (-), 4 = (OUT)

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed informa-
tion
Pneumatics catalog, online PDF, as of 2016-04-07, ©AVENTICS S.à r.l., subject to change
56
Piston rod cylinder ► Short-stroke and compact cylinders

Series KPZ
Accessories

Sensor, Series ST6

► 6 mm T-slot ► with cable ► Plug, M12, 3-pin, with knurled screw

Certificates CE declaration of conformity

cULus
Ambient temperature min./max. -30°C / +80°C
Protection class IP65, IP67
Switching point precision [mm] ±0,1
DC operating voltage min./max. 10 - 30
Switching logic NO (make contact)
Switching capacity Reed, 3-pin: max. 6 W
LED status display Yellow
Vibration resistance 10 - 55 Hz, 1 mm
Shock resistance 30 g / 11 ms

24714
Materials:
Housing Polyamide
Cable sheath Polyurethane
Locking screw Stainless steel

Type of con- Cable length Operational Voltage drop U DC switching AC switching Part No.
tact voltage AC at Imax current, max. current, max.
min./max.
[m] [V] [V] [A] [A]
1 BN
+/–/~

Reed 0.3 10 / 30 I*Rs 0,3 0,5 R412022876

4 BK RL

3 BU
–/+/~

0.1 R412022879
0.3 R412022863
1 BN
+

electronic PNP - ≤ 2,5 0,13 -

4 BK RL

PNP 3 BU
– 3 R412022877
5 R412022878

Part No. Max. switching frequency Operating current, not Operating current, Note
switched switched
[kHz] [mA] [mA]
R412022876 < 0,4 - - 1)
R412022879
R412022863
< 1,0 < 8 mA < 30 mA 2)
R412022877
R412022878
1) Protected against polarity reversal
2) short circuit resistant / Protected against polarity reversal
interfaces: Plug; M12; 3-pin; with knurled screw

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed informa-
tion
Pneumatics catalog, online PDF, as of 2016-04-07, ©AVENTICS S.à r.l., subject to change
 57
Piston rod cylinder ► Short-stroke and compact cylinders

Series KPZ
Accessories

Dimensions
29,5 L
5,7 2,7 40 - 50
4 3
4,8
1* 2*

M12
5,8

X
1

21,75
0,82

2,9

2,5
3* SW

24623

1* = switching point 2* = locking screw 3* = LED window, transparent

L = cable length
X = PNP: 11,6 mm, reed: 8,3 mm
Pin assignment: 1 = (+), 3 = (-), 4 = (OUT)

Sensors, Series SM6

► 6 mm groove ► with cable ► without wire end ferrule, tin-plated, 4-pin ► with distance measuring sensor,
measurement range 32 - 256 mm

Ambient temperature min./max. -20°C / +70°C

Protection class IP67
Output signal 0 - 10 V DC, 4 - 20 mA
Quiescent current (without load) < 25 mA
Current signal 4 - 20 mA
00133722
Maximum load (analog current output) 500 Ω
DC operating voltage min./max. 15 - 30
Residual ripple ≤ 10 %
sampling interval 1 ms
Resolution max. measuring range 0,05 mm
Repetitive precision max. measuring range 0.1 mm
Linearity deviation 0,3 mm
Sampling speed 3 m/s
Display LED
LED status display Yellow
Vibration resistance 10 - 55 Hz, 1 mm
Shock resistance 30 g / 11 ms

Materials:
Housing Polyamide, fiber-glass reinforced
Cable sheath Polyurethane

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed informa-
tion
Pneumatics catalog, online PDF, as of 2016-04-07, ©AVENTICS S.à r.l., subject to change
58
Piston rod cylinder ► Short-stroke and compact cylinders

Series KPZ
Accessories

Type of contact Cable length Measurement range Overall length Part No.
Max. Sensor
A
[m] [mm] [mm]
32 45 R412010141
64 77 R412010143
1 BN 96 109 R412010262
G +
128 141
RL
U
4 BK
R412010264
2 WH Analog 2
I
3 BU RL 160 173 R412010411
–
192 205 R412010413
224 237 R412010415
256 269 R412010417
interfaces: without wire end ferrule, tin-plated; 4-pin
short circuit resistant / Protected against polarity reversal / Overload protection

Dimensions
1* 2* 3*
A L

BN
WH
BK
BU

63
24,2
37,1
14,2
13,6

5,8
5,8

13,6
00133787

1* = LED 2* = teach button 3* = threaded pin M3x11

L = cable length
(1) BN=brown
(2) WH=white
(3) BU=blue
(4) BK=black
A = sensor length

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed informa-
tion
Pneumatics catalog, online PDF, as of 2016-04-07, ©AVENTICS S.à r.l., subject to change
 59
Piston rod cylinder ► Short-stroke and compact cylinders

Series KPZ
Accessories

Sensors, Series SM6

► 6 mm groove ► with cable ► Plug, M8x1, 4-pin, with knurled screw ► with distance measuring sensor,
measurement range 32 - 256 mm

Ambient temperature min./max. -20°C / +70°C

Protection class IP67
Output signal 0 - 10 V DC, 4 - 20 mA
Quiescent current (without load) < 25 mA
Current signal 4 - 20 mA
00134312
DC operating voltage min./max. 15 - 30
sampling interval 1 ms
Resolution max. measuring range 0,05 mm
Repetitive precision max. measuring range 0.1 mm
Linearity deviation 0,3 mm
Sampling speed 3 m/s
Display LED
LED status display Yellow
Vibration resistance 10 - 55 Hz, 1 mm
Shock resistance 30 g / 11 ms

Materials:
Housing Polyamide, fiber-glass reinforced
Cable sheath Polyurethane

Type of contact Cable length Measurement range Overall length Part No.
Max. Sensor
A
[m] [mm] [mm]
32 45 R412010142
64 77 R412010144
1 BN 96 109 R412010263
G +
128 141
RL
U
4 BK
R412010265
2 WH Analog 0.3
I
3 BU RL 160 173 R412010410
–
192 205 R412010412
224 237 R412010414
256 269 R412010416
interfaces: Plug; M8x1; 4-pin; with knurled screw
short circuit resistant / Protected against polarity reversal / Overload protection

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed informa-
tion
Pneumatics catalog, online PDF, as of 2016-04-07, ©AVENTICS S.à r.l., subject to change
60
Piston rod cylinder ► Short-stroke and compact cylinders

Series KPZ
Accessories

Dimensions
1* 2* 3*

M8x1
A L

2 4

3
1

40
24,2
37,1
Ø8,1

14,2
13,6
5,8
5,8
13,6
00133788

1* = LED 2* = teach button 3* = threaded pin M3x11

L = cable length
Pin assignment: 1 = (+), 2 = (OUT 1) 3 = (GND), 4 = (OUT 2), EN 60947-5-7
A = sensor length

Sensor, Series SN3

► Plug, M12, 3-pin ► welding-proof

Ambient temperature min./max. -25°C / +70°C

Protection class IP67, IP65
Switching point precision [mm] ±0,1
Nominal current, actuated state ≤ 10 mA
Quiescent current (without load) ≤ 5 mA
00118461 DC operating voltage min./max. 10
LED status display Yellow
Vibration resistance 55 Hz, 1 mm
Shock resistance 30 g / 11 ms

Materials:
Housing Polyamide

Type of contact Voltage drop U at DC switching current, Max. switching fre- Part No.
Imax max. quency
[V] [A] [kHz]
1
+

3
– electronic PNP ≤ 1,8 0,2 0,02 0830100438
4 RL

interfaces: Plug; M12; 3-pin

short circuit resistant / Protected against polarity reversal

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed informa-
tion
Pneumatics catalog, online PDF, as of 2016-04-07, ©AVENTICS S.à r.l., subject to change
 61
Piston rod cylinder ► Short-stroke and compact cylinders

Series KPZ
Accessories

Dimensions
M12

1)

21,5
14

10

4,8
2,5

17,5

23,5 2)

17

3 4 1 5

6
28

00118449

1) Clamping screw
2) LED
Pin assignments: 1 = (+), 3 = (-), 4 = (OUT), EN 60947-5-2:1998

Sensor mounting, Series CB1

► for Series SN3 ► to mount on cylinder PRA, KPZ, GPC, CCI, KHZ

1) 3 MA1

00112453
2) 3

00122794

1) Clamping screw 2) Mounting screw for sensor 3) Sensor

Part No. For series 1) MA1 [Nm] Material Weight

[kg]
1827020386 SN3 M3x25 1,8 +0,4 Aluminum 0.007

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed informa-
tion
Pneumatics catalog, online PDF, as of 2016-04-07, ©AVENTICS S.à r.l., subject to change
62
Piston rod cylinder ► Short-stroke and compact cylinders

Series KPZ
Accessories

Sensor clamp, Series ST6

► for Series ST6

00136707

00132985

1) Sensor clamp
2) Mounting and assembly

Part No. Cylinders Ø For series Material Weight Delivery

[mm] [kg] quantity
[Piece]
R422000620 16 - 32 ST6 Aluminum 0.001 5
only required to fasten the ST6 sensor to a KPZ cylinder with the following specifications:
Ø16/stroke < 8 mm
Ø20/stroke < 7 mm
Ø25/stroke < 7 mm
Ø32/stroke < 2 mm

Connecting cable, Series CN2

►  Socket, M8, 3-pin, straight ►  open cable ends, 3-pin

Ambient temperature min./max. -40°C / +85°C

Protection class IP65

Materials:
Cable sheath Polyurethane

00107009_b

Technical Remarks
■ The specified protection class is only valid in assembled and tested state.

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed informa-
tion
Pneumatics catalog, online PDF, as of 2016-04-07, ©AVENTICS S.à r.l., subject to change
 63
Piston rod cylinder ► Short-stroke and compact cylinders

Series KPZ
Accessories

Max. current Number of Wire cross-sec- Cable-Ø Cable Weight Part No.
poles tion length L
[A] [mm²] [mm] [m] [kg]
3 0.091 1834484166
1
BN 5 0.145 1834484168
3
BU 4 3 0.24 4.5
4
BK 10 0.33 1834484247

Dimensions
L
40
3+2 3,5

4,5

1,75
10
M8x1

32
3x0,25mm2
00105612_a

L = length

Pin assignment
4

3 1

Buchse_3-polig

(1) BN=brown
(3) BU=blue
(4) BK=black

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed informa-
tion
Pneumatics catalog, online PDF, as of 2016-04-07, ©AVENTICS S.à r.l., subject to change
64
Piston rod cylinder ► Short-stroke and compact cylinders

Series KPZ
Accessories

Connecting cable, Series CN2

►  Socket, M8x1, 3-pin, angled ►  open cable ends, 3-pin

Ambient temperature min./max. -40°C / +85°C

Protection class IP65

Materials:
Cable sheath Polyurethane

00107009_c

Technical Remarks
■ The specified protection class is only valid in assembled and tested state.

Max. current Number of Wire cross-sec- Cable-Ø Cable Weight Part No.
poles tion length L
[A] [mm²] [mm] [m] [kg]
3 0.092 1834484167
1
BN 5 0.141 1834484169
3
BU 4 3 0.24 4.5
4
BK 10 0.276 1834484248

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed informa-
tion
Pneumatics catalog, online PDF, as of 2016-04-07, ©AVENTICS S.à r.l., subject to change
 65
Piston rod cylinder ► Short-stroke and compact cylinders

Series KPZ
Accessories

Dimensions
10
M8x1

3x0,25mm2

4,5
16,2
8,5
16 3+2
20,5 40
L
3,5

1,75
00105612_b

L = length

Pin assignment
4

3 1

Buchse_3-polig

(1) BN=brown
(3) BU=blue
(4) BK=black

Socket, M8x1, Series CN2

►  Socket, M8x1, 3-pin

Ambient temperature min./max. -25°C / +80°C

Protection class IP67

Materials:
Housing Polyamide

00138877

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed informa-
tion
Pneumatics catalog, online PDF, as of 2016-04-07, ©AVENTICS S.à r.l., subject to change
66
Piston rod cylinder ► Short-stroke and compact cylinders

Series KPZ
Accessories

Technical Remarks
■ The specified protection class is only valid in assembled and tested state.

Operational Max. Cable exit suitable number of plug op- Housing Part No.
voltage current cable-Ø min./ tions 1 color
max
AC DC
[V] [V] [A] [mm]
1
BN

3
BU 48 48 4 straight 3.5 / 5 1 position Black 1834484173
4
BK

Part No. Weight

[kg]
1834484173 0.008

Dimensions
38,4
M8x1

32,4
Ø5
Ø11,6

Ø9,7

16405

Pin assignment
4

3 1

Buchse_3-polig

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed informa-
tion
Pneumatics catalog, online PDF, as of 2016-04-07, ©AVENTICS S.à r.l., subject to change
 67
Piston rod cylinder ► Short-stroke and compact cylinders

Series KPZ
Accessories

Socket, M8x1, Series CN2

►  Socket, M8x1, 3-pin, angled

Ambient temperature min./max. -25°C / +85°C

Protection class IP65

Materials:
Housing Polyamide

16406

Technical Remarks
■ The specified protection class is only valid in assembled and tested state.

Operational Max. current Contact assign- Cable exit suitable cable-Ø Part No.
voltage ment min./max
AC DC
[V] [V] [A] [mm]
1
BN

3
BU 48 48 4 3 angled 90° 3.5 / 5 1834484174
4
BK

Part No. number of plug options 1 Housing color Weight

[kg]
1834484174 1 position Black 0.008

Dimensions
ca. 28,0
M8x1

11,6
9,7
12,5

max. 5,0
15832

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed informa-
tion
Pneumatics catalog, online PDF, as of 2016-04-07, ©AVENTICS S.à r.l., subject to change
68
Piston rod cylinder ► Short-stroke and compact cylinders

Series KPZ
Accessories

Pin assignment
4

3 1

Buchse_3-polig

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed informa-
tion
Pneumatics catalog, online PDF, as of 2016-04-07, ©AVENTICS S.à r.l., subject to change
 69
Piston rod cylinder ► Short-stroke and compact cylinders

Series KPZ
Accessories

Silencers, Series SI1

► Sintered bronze

Working pressure min./max. 0 bar / 10 bar

Ambient temperature min./max. -25°C / +80°C
Medium Compressed air

Materials:
Silencers Sintered bronze
Thread Brass

P100_060

Compressed air con- Sound pressure level Qn Delivery quantity Weight Part No.
nection
[dB] [l/min] [Piece] [kg]
M5 72 460 10 0.004 1827000006
G 1/8 75 1500 10 0.01 1827000000

Dimensions

D100_061

Part No. Port G SW ØD L1 L2

1827000006 M5 7 2.5 15 5
1827000000 G 1/8 13 6 18 6
Sound pressure level measured at 6 bar at 1 m distance

Silencers, Series SI1

► Sintered bronze

Working pressure min./max. 0 bar / 10 bar

Ambient temperature min./max. -25°C / +80°C
Medium Compressed air

Materials:
Silencers Sintered bronze
P100_037
Thread Brass

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed informa-
tion
Pneumatics catalog, online PDF, as of 2016-04-07, ©AVENTICS S.à r.l., subject to change
70
Piston rod cylinder ► Short-stroke and compact cylinders

Series KPZ
Accessories

Compressed air con- Sound pressure level Qn Delivery quantity Weight Part No.
nection
[dB] [l/min] [Piece] [kg]
M5 79 280 10 0.005 1827000032
G 1/8 85 640 10 0.001 1827000031

Dimensions

00119505

Part No. Port G L1 L2 SW

1827000032 M5 5 10.3 7
1827000031 G 1/8 6 11.5 13
Sound pressure level measured at 6 bar at 1 m distance

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed informa-
tion
Pneumatics catalog, online PDF, as of 2016-04-07, ©AVENTICS S.à r.l., subject to change
AVENTICS GmbH
Ulmer Straße 4
30880 Laatzen, GERMANY
Phone +49 511 2136-0
Fax +49 511 2136-269
www.aventics.com
[email protected]

Find more contact information at

www.aventics.com/contact

Only use the AVENTICS products

shown in industrial applications.
Read the product documentation
completely and carefully before using
the product.
Observe the applicable regulations
and laws of the respective country.
When integrating the product into
applications, note the system
manufacturer’s specifications for safe
use of the product.
The data specified only serve to
describe the product.
No statements concerning a certain
condition or suitability for a certain
application can be derived from our
information.
The information given does not
release the user from the obligation
of own judgment and verification.
It must be remembered that the
products are subject to a natural
process of wear and aging.

07-04-2016

An example configuration is depicted on the title page. The delivered product may thus vary from that in the
illustration. Subject to change. © AVENTICS S.à r.l.
This document, as well as the data, specifications and other information set forth in it, are the exclusive property of
AVENTICS S.à r.l.. It may not be reproduced or given to third parties without its consent. PDF online