Scribd
Upload
4 views

The PCBA Without Any Signature

The document details the boot process of the BCM3390B0 Bootloader version 2.7.0alpha4, including memory initialization, device setup, and error handling. It outlines the loading and decompression of a DOCSIS image, initialization of various drivers, and the configuration of processors. Additionally, it includes logs of system events, settings verification, and warnings encountered during the boot process.

Uploaded by

maclang.huang
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
4 views

The PCBA Without Any Signature

The document details the boot process of the BCM3390B0 Bootloader version 2.7.0alpha4, including memory initialization, device setup, and error handling. It outlines the loading and decompression of a DOCSIS image, initialization of various drivers, and the configuration of processors. Additionally, it includes logs of system events, settings verification, and warnings encountered during the boot process.

Uploaded by

maclang.huang
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 651

BCM339010

BCM3390B0 Bootloader version 2.7.0alpha4, Built by raiderlu on Jul 20 2023 at


14:46:27
RAM Windows size 63 mb

Loading compressed image 2


Loading 3,752,232 compressed bytes to 0x83a60000
Decompressing DOCSIS image at 0x83a6005c to 0x80004000
Decompressed image size 17,179,700 bytes (0x80004000-0x81066434)
Jumping to application at 0x80004000

eCos - hal_diag_init

Using 66060288(0x03f00000) Bytes Ram Size from Mbox6.

Using 66060288(0x03f00000) Bytes Ram Size from Mbox6.

Using 66060288(0x03f00000) Bytes Ram Size from Mbox6.

Using 66060288(0x03f00000) Bytes Ram Size from Mbox6.


BcmHeapInitialize starts
Init device '/dev/BrcmTelnetIoDriver'
Init device '/dev/ttydiag'
Init tty channel: 81065cc8
Init device '/dev/tty0'
Init tty channel: 81065ce8
Init device '/dev/haldiag'
HAL/diag SERIAL init
Init device '/dev/ser0'
BCM 33XX SERIAL init - dev: d3c00640.1
Set output buffer - buf: 0x813f86b0 len: 4096
Set input buffer - buf: 0x813f96b0 len: 4096
BCM 33XX SERIAL config - UART = d3c00640, chan = 81009cd8
��nit device '/dev/ser1'
Init device '/dev/ser2'
InitBoard: MIPS frequency 600000000
InitBoard: MANUFACT bits 0x5
InitBoard: CM_AON_RESET_HISTORY 0x00000001
+------------------------------------------------------------------------+
| This image is built using remote flash as nonvol. |
+------------------------------------------------------------------------+

ERROR: BcmEmtaIfSettings singleton is NULL and someone is accessing it! Is the


interface enabled?
[00:00:00 01/01/1970] [tStartup] BcmBfcSystemFactory::NewBfcSystem:
BcmEmtaCmDocsisSystem
[00:00:00 01/01/1970] [tStartup] BcmBfcStdEmbeddedTarget::InitStorageDrivers: (BFC
Target) Loading BootloaderStore driver...
[00:00:00 01/01/1970] [tStartup] BcmBfcStdEmbeddedTarget::InitStorageDrivers: (BFC
Target) Loading ProgramStore driver...
[00:00:00 01/01/1970] [tStartup] BcmBfcStdEmbeddedTarget::InitStorageDrivers: (BFC
Target) Loading NonVol driver...
[00:00:00 01/01/1970] [tStartup] BcmBfcStdEmbeddedTarget::InitStorageDrivers: (BFC
Target) Storage drivers initialized successfully.
[00:00:00 01/01/1970] [tStartup] BcmBfcStdEmbeddedTarget::InitDeviceAbstractions:
(BFC Target) Creating singletons for ProgramStore/BootloaderStore/NonVol devices...
Detecting the next image number that we will store to by default...
Bootloader indicates we are running image 2
Image2 header is not valid!
By default, we will dload to image number 2!

ProgramStoreDriverSetAlternateSignature:: Alternate signature is set to 9055


[00:00:00 01/01/1970] [tStartup] BcmBfcStdEmbeddedTarget::InitDeviceAbstractions:
(BFC Target) Device abstraction singletons created successfully.

mtaNvCalcChecksum: checksum= 1273036258


Reading Permanent settings from non-vol...
Checksum for permanent settings: 0xd18818d1
Setting downstream calibration signature to 'Prod_19.3_d31'
Setting downstream calibration signature to 'Prod_19.3_d31'
Settings were read and verified.

Reading Dynamic settings from non-vol...


Checksum for dynamic settings: 0x8d55b161
Settings were read and verified.

[00:00:02 01/01/1970] [tStartup] BcmBfcFpmDriver::Init: (BFC FPM Driver) FPM


already initialized, skipping hardware init
[00:00:02 01/01/1970] [tStartup] BcmBfcFpmDriver::Init: (BFC FPM Driver) FPM DDR
Start Phys Addr DDR Bank0: 0x9c00000
[00:00:02 01/01/1970] [tStartup] BcmBfcFpmDriver::Init: (BFC FPM Driver) FPM DDR
Start Virt Addr DDR Bank0: 0x89c00000
[00:00:02 01/01/1970] [tStartup] BcmBfcFpmDriver::Init: (BFC FPM Driver) FPM DDR
Start Phys Addr DDR Bank1: 0xbc00000
[00:0Starting DTP Processor.
Asserting 4KE(3) Reset!
_ENTRY4KE location = 8000e138
jumpvect4ke location = 80001000
entryCodeLoc = 80001000
Releasing reset to the 4KE core ID 3.
Releasing 4KE(10) Reset!
Waiting for core:3 4ke to respond via mailbox(1).
IOP Core: 3 Configured and Ready after 0 ms!
Starting UTP Processor.
Asserting 4KE(2) Reset!
Releasing reset to the 4KE core ID 2.
Releasing 4KE(10) Reset!
Waiting for core:2 4ke to respond via mailbox(1).
UtpDebugCounter 0xd0a80210
IOP Core: 2 Configured and Ready after 0 ms!
Starting EMC Processor.
Asserting 4KE(7) Reset!
Releasing reset to the 4KE core ID 7.
Releasing 4KE(10) Reset!
Waiting for core:7 4ke to respond via mailbox(1).
IOP Core: 7 Configured and Ready after 0 ms!
Starting FAP Processor.
Powering up FAP..
Asserting 4KE(4) Reset!
Releasing reset to the 4KE core ID 4.
Releasing 4KE(10) Reset!
Waiting for core:4 4ke to respond via mailbox(1).
0:02 01/01/1970] [tStartup] BcmBfcFpmDriver::Init: (BFC FPM Driver) FPM DDR Start
Virt Addr DDR Bank1: 0x8bc00000
[00:00:02 01/01/1970] [tStartup] BcmBfcFpmDriver::Init: (BFC FPM Driver) Length:
0x1000000
[00:00:02 01/IOP Core: 4 Configured and Ready after 14 ms!
01/1970Starting up MISC SERVICES
Creating a new host CPU_COMM DQM manager. Instance: 82e1cbec, DQM_REGS = d3801c00
Creating a new host CPU_COMM DQM manager. Instance: 82e1cb24, DQM_REGS = d3801c00
Creating a new host CPU_COMM DQM manager. Instance: 82e1a84c, DQM_REGS = d3801c00
Creating a new host CPU_COMM DQM manager. Instance: 82e1a784, DQM_REGS = d3801c00
Creating a new host CPU_COMM DQM manager. Instance: 82e184ac, DQM_REGS = d3801c00
Creating a new host CPU_COMM DQM manager. Instance: 82e183dc, DQM_REGS = d3801c00
Creating a new host CPU_COMM DQM manager. Instance: 82e160fc, DQM_REGS = d3801c00
Creating a new host CPU_COMM DQM manager. Instance: 82e1602c, DQM_REGS = d3801c00
] [tStartup] BcmBfcFpmDriver::Init: (BFC FPM Driver) FPM Buffer size set to: 256
[00:00:02 01/01/1970] [tStartup] BcmBfcFpmDriver::Init: (BFC FPM Driver)
fFpmLargestBufferSize: 2048 fFpmSizeShiftBits: 0x8
[00:00:02 01/01/1970] [tStartup] BcmBfcFpmDriver::Init: (BFC FPM Driver) Pool
index: 0 pool size: 2048
[00:00:02 01/01/1970] [tStartup] BcmBfcFpmDriver::Init: (BFC FPM Driver) Pool
index: 1 pool size: 1024
[00:00:02 01/01/1970] [tStartup] BcmBfcFpmDriver::Init: (BFC FPM Driver) Pool
index: 2 pool size: 512
[00:00:02 01/01/1970] [tStartup] BcmBfcFpmDriver::Init: (BFC FPM Driver) Pool
index: 3 pool size: 256
[00:00:02 01/01/1970] [tStartup] BcmBfcFpmDriver::Init: (BFC FPM Driver) Lookup
table index: 0 pool size: 3
[00:00:02 01/01/1970] [tStartup] BcmBfcFpmDriver::Init: (BFC FPM Driver) Lookup
table index: 1 pool size: 2
[00:00:02 01/01/1970] [tStartup] BcmBfcFpmDriver::Init: (BFC FPM Driver) Lookup
table index: 2 pool size: 1
[00:00:02 01/01/1970] [tStartup] BcmBfcFpmDriver::Init: (BFC FPM Driver) Lookup
table index: 3 pool size: 1
[00:00:02 01/01/1970] [tStartup] BcmBfcFpmDriver::Init: (BFC FPM Driver) Lookup
table index: 4 pool size: 0
[00:00:02 01/01/1970] [tStartup] BcmBfcFpmDriver::Init: (BFC FPM Driver) Lookup
table index: 5 pool size: 0
[00:00:02 01/01/1970] [tStartup] BcmBfcFpmDriver::Init: (BFC FPM Driver) Lookup
table index: 6 pool size: 0
[00:00:02 01/01/1970] [tStartup] BcmBfcFpmDriver::Init: (BFC FPM Driver) Lookup
table index: 7 pool size: 0

------------------------------------
Free Pool Manager Configuration
------------------------------------
Buffer size in Bytes............... 256
Default Offset in Bytes............ 16
Default Pad in Bytes............... 0

Pool 0:
Base Address of FPM Memory ........ 0x89c00000
Total Configured FPM Memory Size... 16777216
Free Fifo Full..................... 0
Free Fifo Empty.................... 1
Alloc Fifo Full.................... 1
Alloc Fifo Empty................... 0
Number of Tokens................... 65536
Number of Tokens Available......... 65136
Number of not valid token frees.... 0
Number of not valid token multi.... 0
Overflow Count..................... 0
Underflow Count.................... 0

Pool 1:
Base Address of FPM Memory ........ 0x8bc00000
Total Configured FPM Memory Size... 16777216
Free Fifo Full..................... 0
Free Fifo Empty.................... 1
Alloc Fifo Full.................... 1
Alloc Fifo Empty................... 0
Number of Tokens................... 65536
Number of Tokens Available......... 65407
Number of not valid token frees.... 0
Number of not valid token multi.... 0
Overflow Count..................... 0
Underflow Count.................... 0
[00:00:02 01/01/1970] [tStartup] BcmBfcPacketAlloc::Init: (Bfc Packet Allocation)
Packet Alloc Header Buffer Pool 0 Start Addr: 0x83530200 Length: 0x700000 Max
Buffer Size: 0x70
[00:00:02 01/01/1970] [tStartup] BcmBfcPacketAlloc::Init: (Bfc Packet Allocation)
Packet Alloc Header Buffer Pool 1 Start Addr: 0x82e301e0 Length: 0x700000 Max
Buffer Size: 0x70
Initializing main FAP DQM interrupts.
e8401000: 00800048
e8401004: 00000000
e8401008: 00000008
e840100c: 00000000
e8401010: 00040000
e8401014: 00000000
e8401018: 00000000
e840101c: 00000000
Initializing main FAP DQM interrupts.
e8401000: 00800048
e8401004: 00000000
e8401008: 0000000a
e840100c: 00000000
e8401010: 00040000
e8401014: 00000000
e8401018: 00000000
e840101c: 00000000
ITCRPC: ITC CTL Tx sent initial handshake CODE0
ITCRPC: ITC1 CTL Tx sent initial handshake CODE0
ITCRPC: ITC CTL TP1 Tx sent initial handshake CODE0
ITCRPC: ITC CTL SVM Tx sent initial handshake CODE0
[00:00:02 01/01/1970] [ConsoleMirrorThread] ConsoleMirrorThread::ThreadMain:
(ConsoleMirrorThread) Console Mirror thread running...
[00:00:02 01/01/1970] [Telnet Thread] BcmTelnetThread::ThreadMain: (Telnet Thread)
Telnet server thread running...
ITCRPC: ITC CTL Rx got first message event
ITCRPC: ITC CTL Tx sent reply handshake message CODE1
ITCRPC: ITC CTL SVM Rx got first message event
ITCRPC: ITC CTL SVM TxCreating BcmCmRgMsgPipeCommandTable
Creating SNMP agent cablemodem agent
cablemodem agent disabling management.
cablemodem agent deferring traps.
Creating BcmEmtaCommandTable
Creating BcmEmtaEndptCommandTable
WARNING: Parameter with id 1 already exists!
If you pressed the 's' key before this point, we will skip driver initialization...
sent reply handshake message CODE1
RPC Version 00000006
DQM Init complete for tunnel 0
RPC Version 00000006
DQM Init complete for tunnel 3
[01/01/1970 00:00:02] [BFCEV] Unspecified system reset. HW reset history=0x00000001
( power_on_reset )
Creating DOCSIS Control Thread...
Initializing maiInitalizing Gfap Hal..
n DTP DQM interrupts.
e8001000: 00000048
e8001004: 00000000
e8001008: 00000008
e800100c: 00000000
e8001010: 00000000
e8001014: 00040000
e8001018: 00000000
e800101c: 00000000
Creating a new host UTP DQM manager. Instance: 82d6f9b8
Initializing main UTP DQM interrupts.
e8201000: 00000049
e8201004: 00000000
e8201008: 00000008
e820100c: 00000000
e8201010: 00000000
e8201014: 00000000
e8201018: 00000000
e820101c: 00000000
->No ext LNA controlled by CM. Default to Internal LNA!
->SetUsPll
PllMiscCtrl.Reg(b21=PhaseCaptMode)=0x00200000
VwdacExt = 639
VwdacInt = 634
Ewdac = 0.007886
Delta Fine = 0x2

>>>>ChipID=0x3390, ChipRev=0x10. Allocated memory for Viper = 0x03f00000


PllDcoCtrl B4=0x00000000, AF=0x00000001
>>>Loading Uni leap image...
>>>Reset AP
LeapCtrl.ByteSwapEn(0xd21000a8) = 0x03030303
LeapCtrl.AddrTrans(0xd21000ac) = 0x07f00001
LEAP RevID reg(0xd2100000) = 0x00000200
>>>>EndianSwap(b7)=0x00
>>>>LEAP Chip Load Address=0x4000c200 len=474104
>>>>Mips Noncache Chip Load Address=0xa3f0c200
Downloading LEAP image 474104 bytes starting address 0xa3f0c200.Done!

>>>AP dload time = 164 ms


>>>Run AP
HAB_InitDoneEvent set after 390 ms.

>>>>HabStartAddress=0xd20c8000
>>>>MultiMaster Leap access is working!
****************************************************************************
* LEAP ApVersion: ChpId=0x00003390, RevId=0x0040, LeapRAMVersion=12.2.7023.0 *
****************************************************************************
>>LEAP CPPM=1510ms. Disable optional Scan mode. CppmMode=0<<

LeapInit: powerup LNA pga1=Off, pga2=On...


BcmHalMapInterrupt to INTERRUPT_ID_US_IRQ! Maskbit=0x00000000, Statusbit=0x00000000
WOD0 Shared Mem Address: 0x400e6564
WOD1 Shared Mem Address: 0x400e7670
AIF Status Shared Mem Address: 0x400e8974

>>>>LEAP Serial Buffer Start Address=0x400907bc size=0x00009000


Curr_write_ptr=0x40094035 NumPrintMsg=214
>>>>Mips Noncache LeapUartCircularBufferStartAddr=0xa3f907bc

<-LeapInit Done! LeapVerNum=12270230


Curr Leap version=12270230, checkVersion=11270191
UDA Tertiary Shared Mem Address: 0x400e2494 len=16576;
UDA Quaternary Shared Mem Address: 0x400e1c04 len=2176
UDA Shared Mem Address: 0x400e8974
UDA PgaRloadgainCntl = 0x0f

===== Read Leap AIF Status =====


CfgMode: 0x00000000 CPPM=2(In Progess); CABLE=1(Disconnected)
LnaInfo: 0x34320000 => LnaMode=0
LnaInfo_pga: 0x01000100 ==> PGA_Tilt=0, PGA_Gain=0, PGA2_Tilt=0, PGA2_GAIN=0
FreqStep code: 1
FreqStartHz: 56999999 hz
FreqStopHz: 1215000000 hz
Composite Power: -20536 1/256 dB ==> -80.218750 dB
Disconnect ThresHold: 0xffffb000
CPPM ThresHold: 0xffffe94d
CPPM ThresHold Hysteresis: 0x00000500
CPPM Max Power: 0xffff9af1 1/256 dB ==> -101.058594 dB
CPPM Min Power: 0xffff959f 1/256 dB ==> -106.378906 dB

Skip External channels detection! Total channel=34

SetRatios called with primary downstream channel number = 0


AnnexMode[0] = 0 QAM_Mode[0] = 0
Num/Den = 78/149
BcmMacInit: advMapRunAheadTimeMin = 3584 (0x00000e00) 10.24 MHz ticks, 350 usec
Control table same as default - offset is 700
Initializing DS Docsis 3.0 MAC
Initializing Quarantine D3 DS MAC structures to 0
Initializing Quarantine D31 DS MAC structures to 0
Initializing Quarantine D31 DS MAC structures to 0
Initializing US Docsis 3.0 MAC
Creating a new host UTP DQM manager. Instance: 82cfbb48
Creating a new host UTP DQM manager. Instance: 82cf9a38
[00:00:06 01/01/1970] [tStartup] BcmDocsisCmHalIf::Register: (DOCSIS CableModem
HalIf) CM HAL reports h/w support for PHS, bitmask=0x3
[00:00:06 01/01/1970] [tStartup] BcmDocsisCmHalIf::Register: (DOCSIS CableModem
HalIf) CM HAL reports h/w support for PHS, US size=64, DS size=256 bytes.
Tcpip NI: Init - RegisteredStackCount = 1
Tcpip NI: Init - RegisteredStackCount = 2
Tcpip NI: Init - RegisteredStackCount = 3
Tcpip NI: Init - RegisteredStackCount = 4
Tcpip NI: Init - RegisteredStackCount = 5
Tcpip NI: Init - RegisteredStackCount = 6
Tcpip NI: Init - RegisteredStackCount = 7
Tcpip NI: Init - RegisteredStackCount = 8
Tcpip NI: Init - RegisteredStackCount = 9
Tcpip NI: Init - RegisteredStackCount = 10
ItcNiDriverEntry: interface 44
Creating a new host CPU_COMM DQM manager. Instance: 82cde704, DQM_REGS = d3801c00
Creating a new host CPU_COMM DQM manager. Instance: 82cde63c, DQM_REGS = d3801c00
Starting driver for BcmBfcVirtualNiHalIf Virtual Eth-Switch Lan(0)
Creating a new host UTP DQM manager. Instance: 82d7a580
Creating a new host UTP DQM manager. Instance: 82d7a498
Starting driver for BcmBfcVirtualNiHalIf Virtual Eth-Switch Lan(1)
Starting driver for BcmBfcVirtualNiHalIf Virtual Eth-Switch Lan(2)
Starting driver for BcmBfcVirtualNiHalIf Virtual Eth-Switch Lan(3)
Starting driver for BcmBfcVirtualNiHalIf Virtual Eth-Switch Lan(7)
Starting driver for BcmBfcVirtualNiHalIf Virtual RG Host
Starting driver for BcmBfcVirtualNiHalIf Virtual MoCA
Starting driver for BcmBfcVirtualNiHalIf Virtual WiFi(0)(0) MBSS
Starting driver for BcmBfcVirtualNiHalIf Virtual WiFi(1)(0) MBSS
Starting driver for BcmBfcVirtualNiHalIf Virtual WiFi(2)(0) MBSS
**************************************************************
NOTE: CM VirtNiHAL mode is: ENABLED
**************************************************************
Creating BcmEmtaRemoteAccessCommandTable
ItcRxThreadmisc_dqnet_status ifname priv0 up
: STBrx
Forward Assist Manager Starting...
NATC Info: FAP NATC initialized!!!
[00:00:06 01/01/1970] [Forward Assist Manager]
BcmBfcForwardAssistManager::OperatingConfigBitsEnable: (Forward Assist Manager)
New Config = 0x48000000
UnimacByoi: Enabled
misc_dqnet_status ifname cm0 up
Warning: service 4 rx unregistered function 1
rpc_send_request timeout on tunnel 0
<<<<<<<<<<<<< rpc_dump_msg >>>>>>>>>>>>>>>>>>
msg 0x810cffb0 RC 0 Req 1 Rep 0 Serv 4 Func 22 reqcnt 0
Len: 4 02041600 00000000 00000000 00000000
[00:00:11 01/01/1970] [ThermalMgmt] BcmThermalMonitor: initialized OK.
Creating the PacketCable Forwarder...
Adding IP Stack6 HalIf to the PacketCable Forwarder
Calling BcmCmDocsisSystem::PostDriverInitialization()...
Creating the DOCSIS Forwarder...
The virtual ethernet IP stack (7) is enabled!
Not hooking to a forwarder to avoid CPE hijack.
Adding DOCSIS CableModem HalIf as the default interface to the DOCSIS Forwarder
Adding IP Stack1 HalIf to the DOCSIS Forwarder
Adding IP Stack2 HalIf to the DOCSIS Forwarder
Adding IP Stack8 HalIf to the DOCSIS Forwarder
Adding IP Stack9 HalIf to the DOCSIS Forwarder
Adding ITC0 HalIf to the DOCSIS Forwarder
Adding Virtual Eth-Switch Lan(0) HalIf to the DOCSIS Forwarder
Adding Virtual Eth-Switch Lan(1) HalIf to the DOCSIS Forwarder
Adding Virtual Eth-Switch Lan(2) HalIf to the DOCSIS Forwarder
Adding Virtual Eth-Switch Lan(3) HalIf to the DOCSIS Forwarder
Adding Virtual Eth-Switch Lan(7) HalIf to the DOCSIS Forwarder
Adding Virtual RG Host HalIf to the DOCSIS Forwarder
Adding Virtual MoCA HalIf to the DOCSIS Forwarder
Adding Virtual WiFi(0)(0) MBSS HalIf to the DOCSIS Forwarder
Adding Virtual WiFi(1)(0) MBSS HalIf to the DOCSIS Forwarder
Adding Virtual WiFi(2)(0) MBSS HalIf to the DOCSIS Forwarder
WARNING - Couldn't find table 1.3.6.1.4.1.4413.2.2.2.1.2.5.11.8 on Vendor CM Agent
w/ BRCM Factory Support
Restricting transmission between Virtual RG Host and virtual CPE interfaces.
MSN (NEW 2b): Found Itc HalIf! cpeStack = 2
Linking Docsis and PacketCable packet switches...
Adding DOCSIS Embedded Interface HalIf as the default interface to the
PacketCable Forwarder
Adding PacketCable Embedded Interface HalIf to the DOCSIS Forwarder
MSN (NEW 2b-eMTA): Found Itc HalIf! cpeStack = 2
Setting up singleton pointer.
Creating SNMP agent eRouter Proxy Agent
eRouter Proxy Agent disabling management.
eRouter Proxy Agent deferring traps.
Enabling SNMP proxy
Creating SNMP agent EMTA agent
EMTA agent disabling management.
EMTA agent deferring traps.
EMTA agent entering RFC-2576 Coexistence security mode.
EMTA agent entering Basic/Hybrid flow provisioning mode.
Creating SNMP agent eMTA Proxy Agent
eMTA Proxy Agent disabling management.
eMTA Proxy Agent deferring traps.
Enabling SNMP proxy
eMTA Proxy Agent setting UDP port to 12161
WARNING - Couldn't find table 1.3.6.1.2.1.7.5 on emta factory agent
WARNING - Couldn't find table 1.3.6.1.2.1.7.5 on eMTA Proxy Agent
BcmSnmpThread:AgentPropertiesChanged descriptor NULL!

Configuring IP stack 2: IP Address = 192.168.100.1


[00:00:12 01/01/1970] [tStartup] BcmEcosIpHalIf::AddIpv6LinkLocalAddress: (IP
Stack2 HalIf) Configuring link-local IPv6 address fe80::fe4a:e9ff:fede:ad02/64
Creating Propane Control Thread...
Propane version: 2.0.1 (28 Oct 2002)
Received RG Event 0x
BcmCmDocsisApplication::PostDriverInitialization Configuring SNMP.
Initializing ifPhysAddress values...
Instantiating CmSnmpAgent object.
Starting SNMP subsystem
Registering STP Filter Snoop with all interfaces.
Registering DOCSIS MIB Filter Snoop with CPE and WAN interfaces.
Creating SNMP agent CPE diag agent
CPE diag agent disabling management.
CPE diag agent deferring traps.
[00:00:12 01/01/1970] [tStartup] BcmNonVolDeviceDriverBridge::WriteImpl: (NonVol
Device) ERROR - Failed to write settings data to the device!
[00:00:12 01/01/1970] [tStartup] BcmNonVolDeviceDriverBridge::WriteSync: (NonVol
Device) ERROR - Synchronous write to dynamic nonvol section failed!
ERROR - failed to write Non-Vol Settings to the device!
BcmSnmpThread starting thread operation.
[80000001Configuring IP stack 9: IP Address = 172.31.255.45
[00:00:12 01/01/1970] [eRouterMsgPipe] BcmEcosIpHalIf::AddIpv6LinkLocalAddress:
(IP Stack9 HalIf) Configuring link-local IPv6 address fe80::fe4a:e9ff:fede:ad11/64
eRouterMessagePipe subscribing to 'thermal' events.
Thermal sensitivity is 'HIGH'
State 'Normal' enabled.
State 'Elevated 1' enabled.
State 'Elevated 2' enabled.
State 'Elevated 3' enabled.
State 'Elevated 4' enabled.
State 'Elevated 5' enabled.
State 'Elevated 6' enabled.
00: 0:12 1/ 1/1970] [Telnet Thread] BcmTelnetThread::CreateAndBindIp: (Telnet
Thread) Telnet listening on 192.168.100.1
[00:00:12 01/01/1970] [Telnet Thread] BcmTelnetThread::CreateAndBindIp: (Telnet
Thread) ERROR - IP Address 192.168.100.1 already bound with Size: 1
[00:00:12 01/01/1970] [Telnet Thread] BcmTelnetThread::CreateAndBindIp: (Telnet
Thread) Telnet listening on 172.31.255.45
State 0x0
Received eRouter BOOTED event from RG
EROUTER I.P Address: 172.31.255.40
Certificate File Name: newreq.ca
Initializing Net-SNMP transport for IPv4
Initializing Net-SNMP transport for IPv6
IPv6 - register netsnmp_brcmV6_ctor to get our brcm V6 UDP domain
IPv6 init_bcmV2SessionAndTransport: Open a session and hook our callbacks
[00:00:13 01/01/1970] [tStartup] BcmDocsisCmHalIf::RegisterSnmpObjects: (DOCSIS
CableModem HalIf) Interface 10 additional registration w/ SNMP agent OK.
[00:00:13 01/01/1970] [tStartup] BcmPacketSwitchBridgingHalIf::RegisterSnmpObjects:
(PacketCable Embedded Interface HalIf) Interface 39 additional registration w/ SNMP
agent OK.
CmSnmpAgent installing views...
CmSnmpAgent installing DOCSIS Default View entries...
Vendor CM Agent w/ BRCM Factory Support installing engine ID...
Vendor CM Agent w/ BRCM Factory Support installing context...
===> WARNING: Failed to register ScalarMibBridge 1.3.6.1.2.1.126.1.4 to agent
Vendor CM Agent w/ BRCM Factory Support
===> Object already bridged.
===> WARNING: Failed to register ScalarMibBridge 1.3.6.1.4.1.4491.2.1.29.1.2 to
agent Vendor CM Agent w/ BRCM Factory Support
===> Object already bridged.
SNMP startup complete.
SpecA - IP Stack address is 0.0.0.0
mongoose set_ports_option: listening on:(IPv4) 0.0.0.0; port:8080
[[00:00:14 01/01/1970] [tStartup] BcmHttpServerThread::Enable: (HttpServerThread)
Broadcom HttpServerThread running status = 1
[00:00:14 01/01/1970] [tStartup] BcmVendorCmApplication::CreateDhcpServer:
(VendorExtension CmApp) Configuring the DHCP server with 50 leases from
192.168.100.10 -> 192.168.100.60; lease time is 30 seconds.
[00:00:14 01/01/1970] [tStartup] BcmVendorCmApplication::StartDhcpServer:
(VendorExtension CmApp) Starting DHCP Server!
[00:00:14 01/01/1970] [HTTP Client Thread] BcmDocsisCmHalIf::AddSnoop: (DOCSIS
CableModem HalIf) WARNING - HTTP Client Snoop: unsafe modification of the Snoop
lists after the interface is up!
K0Binding NV remote IP sockets to 172.31.255.45
**** RemoteNonVolAccess **** Remote nonvol access is ENABLED

initBlindData: nvramSize= 716


mtaNvCalcChecksum: checksum= 1273101781Completed Adding New Command for Emta Remote
Console: log
Completed Adding New Command for Emta Remote Console: diag
Completed Adding New Command for Emta Remote Console: reset
Completed Adding New Command for Emta Remote Console: set
Completed Adding New Command for Emta Remote Console: show
EMTA battery callback = 0x80901d50
[00:00:14 01/01/1970] [tStartup] BcmEcosIpHalIf::AddSnoop: (IP Stack6 HalIf)
WARNING - NetToMedia Snoop: unsafe modification of the Snoop lists after the
interface is up!
[e00[00:00:14 01/01/1970] [HTTP Client Thread] HttpClientThread::ThreadMain: (HTTP
Client Thread) Broadcom HTTP Client thread starting...
y File Name: newreq.key

No Certificate file!

Starting TFTP of CM Version file!

Opening file 'cmversion.txt' on 172.31.255.40 for writing...


:00:14 01/01/1970] [Telnet Thread] BcmTelnetThread::CreateAndBindIp: (Telnet
Thread) Telnet listening on fd00::ffff:ac1f:ff2d/64
[00:00:14 01/01/1970] [Telnet Thread] BcmTelnetThread::CreateAndBindIp: (Telnet
Thread) ERROR - IP Address 172.31.255.45 already bound with Size: 3
[00:00:14 01/01/1970] [Telnet Thread] BcmTelnetThread::CreateAndBindIp: (Telnet
Thread) ERROR - IP Address fd00::ffff:ac1f:ff2d/64 already bound with Size: 3
[00:00:14 01/01/1970] [Telnet Thread] BcmTelnetThread::CreateAndBindIp: (Telnet
Thread) ERROR - IP Address 172.31.255.45 already bound with Size: 3
[00:00:14 01/01/1970] [Telnet Thread] BcmTelnetThread::CreateAndBindIp: (Telnet
Thread) ERROR - IP Address fd00::ffff:ac1f:ff2d/64 already bound with Size: 3
WARNING - Couldn't find group 1.3.6.1.4.1.4413.2.2.2.1.9.1.2 on emta factory agent
[00:00:14 01/01/1970] [tStartup]
EmtaPacketSwitchBridgingHalIf::RegisterSnmpObjects: (DOCSIS Embedded Interface
HalIf) Interface 40 additional registration w/ SNMP agent OK.
[00:00:14 01/01/1970] [tStartup] BcmEcosIpHalIf::AddSnoop: (IP Stack6 HalIf)
WARNING - IfUnknownProtos Snoop: unsafe modification of the Snoop lists after the
interface is up!
[00:00:14 01/01/1970] [tStartup] BcmEcosIpHalIf::AddSnoop: (IP Stack6 HalIf)
WARNING - eCos UDP port 0 Snoop: unsafe modification of the Snoop lists after the
interface is up!
===> WARNING: Failed to register ScalarMibBridge 1.3.6.1.4.1.4413.2.2.2.1.9.1.5 to
agent emta factory agent
===> Object not found on agent.
emta factory agent installing engine ID...
emta factory agent installing context...
emta factory agentResetting to default state.
emta factory agent destroying users...
emta factory agent destroying notifies...
emta factory agent destroying views...
emta factory agent entering RFC-2576 Coexistence security mode.
emta factory agent entering Basic/Hybrid flow provisioning mode.
[00:00:14 01/01/1970] [tStartup] BcmEcosIpHalIf::AddSnoop: (IP Stack6 HalIf)
WARNING - ARP Filter Snoop: unsafe modification of the Snoop lists after the
interface is up!
[00:00:14 01/01/1970] [tStartup] BcmEcosIpHalIf::AddSnoop: (IP Stack6 HalIf)
WARNING - Mini USFS Snoop: unsafe modification of the Snoop lists after the
interface is up!
[00:00:14 01/01/1970] [tStartup] BcmEcosIpHalIf::AddSnoop: (IP Stack1 HalIf)
WARNING - ARP Filter Snoop: unsafe modification of the Snoop lists after the
interface is up!
[00:00:14 01/01/1970] [tStartup] BcmEcosIpHalIf::AddSnoop: (IP Stack1 HalIf)
WARNING - LAN Broadcast Rate Limiter Snoop: unsafe modification of the Snoop lists
after the interface is up!
[00:00:14 01/01/1970] [tStartup] BcmEcosIpHalIf::AddSnoop: (IP Stack6 HalIf)
WARNING - NeighborDiscoverySnoop: unsafe modification of the Snoop lists after the
interface is up!
Initializing diplexer
>>DpXer Select1 active: GPIO34 set to 0<<
>>Sending 16 DsCal Offsets to Leap<<
00[00:00:14 01/01/1970] [Telnet Thread] BcmTelnetThread::CreateAndBindIp: (Telnet
Thread) ERROR - IP Address 172.31.255.45 already bound with Size: 3
Activated HW diplexer 1: US:(5 MHz..204 MHz) DS:(258 MHz..1218 MHz) (ACTIVE)
SWITCHABLE diplexer settings
----------------------------
0: US:(5 MHz..85 MHz) DS:(108 MHz..1218 MHz)
1: US:(5 MHz..204 MHz) DS:(258 MHz..1218 MHz) (ACTIVE)

Diplexer driver settings


------------------------
Diplexer driver uses GPIO 34, STANDARD sense.
Current diplexer driver selection is HIGH

[00:00:15 01/01/1970] [ThermalMgmt] BcmThermalMonitor::StartSensors: Starting


thermal sensor timers
[00:00:15 01/01/1970] [ThermalMgmt] Setting thermal throttle state 5 threshold to
>= 125C
[00:00:15 01/01/1970] [ThermalMgmt] Setting thermal throttle state 4 threshold to
>= 123C
[00:00:15 01/01/1970] [ThermalMgmt] Setting thermal throttle state 3 threshold to
>= 122C
[00:00:15 01/01/1970] [ThermalMgmt] Setting thermal throttle state 2 threshold to
>= 120C
[00:00:15 01/01/1970] [ThermalMgmt] Setting thermal throttle state 1 threshold to
>= 115C

Checking board manufacturing state...


WARNING: Board NV manufacturing incomplete.
Check the following settings:
USB MAC, BPI public key, BPI private key, BPI+ root public key, BPI+ CM
certificate, BPI+ CA certificate, BPI public key, BPI private key, BPI+ root public
key, BPI+ CM certificate, BPI+ CA certificate, CM MAC address (IP stack 1), BPI 3.1
public key, BPI 3.1 private key, BPI 3.1 Device CM Certificate, BPI 3.1 Device CA
certificate, BPI 3.1 Root CA certificate, docsDevSerialNumber, MTA pvt key exponent
Installing temporary factory key.

:0
Bulk Data Transfer Thread is ready.

00:14.300 01/01/1970 (LOG) WARN: Module CALC. Is already registered!


00:00:15.300 01/01/1970 (LOG) WARN: Module NET. Is already registered!
00:00:15.300 01/01/1970 (LOG) WARN: Module UTIL. Is already registered!
: 0:15 1/ 1/1970] [IpsecTimer] IpsecTimer::ThreadMain: Entering...
[00:00:15 01/01/1970] [Telnet Thread] BcmTelnetThread::CreateAndBindIp: (Telnet
Thread) ERROR - IP Address fd00::ffff:ac1f:ff2d/64 already bound with Size: 3
Vendor CM Event Log initializing with stored events.
00:00:15.370 01/01/1970 (CALC) CC: Initialization starting...
Done w/ deferred traps.
Vendor CPE Agent w/ BRCM Factory Support installing engine ID...
Vendor CPE Agent w/ BRCM Factory Support installing context...
Event log initialization complete.
Waiting for eRouter boot message.
[00:00:16 01/01/1970] [eRouterMsgPipe] Tftp Client::GetReply: (Tftp Client) Timed
out on socket select!
[00:00:16 01/01/1970] [eRouterMsgPipe] Tftp Client::Send: (Tftp Client) Attempt
#(1) Backoff (2) Exp Block #(0) Last Block #(0) Recv'd Block #(0)

Tftp transfer CM version file open successful!


Tftp transfer CM version file is complete!

Starting TFTP of eRouter Version file!

Opening file 'version.txt' on 172.31.255.40 for reading...


[00:00:16 01/01/1970] [eRouterMsgPipe] Tftp Client::Send: (Tftp Client) TFTP
blocksize value returned by server: 1448
Setting proxy community to public/private
RouterProxySnmpAgent verifying IP communication to eRouter
Tftp read < 1448 bytes, we have reached end of file.
Tftp transfer complete!
TFTP Settings:
Stack Interface = 0
Server Ip Address = 172.31.255.40
Server Port Number = 69
Block size = 1448
Total Blocks Read = 4
Total Bytes Read = 5525

eRouter is configured to remain UP on battery.


Enabling SNMP proxy
Sent 10 pings, received 10 replies.
eRouter is operating in Disabled mode.
Creating SNMP agent eRouter Remote Agent
eRouter Remote Agent disabling management.
eRouter Remote Agent deferring traps.
Enabling SNMP proxy
RouterProxySnmpAgent populating MIBs...
RouterProxySnmpAgent populating proxy_cableDataFactoryGroup...
RouterProxySnmpAgent populating proxy_esafeMibGroup...
RouterProxySnmpAgent populating proxy_bfcMgmtGroup...
RouterProxySnmpAgent populating proxy_rgMgmtBaseGroup...
RouterProxySnmpAgent populating proxy_hrStorageGroup...
RouterProxySnmpAgent populating proxy_hrDeviceGroup...
RouterProxySnmpAgent populating proxy_httpMgmtGroup...
RouterProxySnmpAgent populating proxy_ifMIBGroup...
RouterProxySnmpAgent populating proxy_interfacesGroup...
RouterProxySnmpAgent populating proxy_brcmCpeMgmtGroup...
RouterProxySnmpAgent populating proxy_rip2Group...
RouterProxySnmpAgent populating proxy_igmpStdMIBGroup...
RouterProxySnmpAgent populating proxy_l2ogreMibGroup...
RouterProxySnmpAgent populating proxy_clabGREMibGroup...
RouterProxySnmpAgent populating proxy_pingMgmtGroup...
RouterProxySnmpAgent populating proxy_wifiMgmtGroup...
RouterProxySnmpAgent populating proxy_wifiHotspotMibGroup...
RouterProxySnmpAgent populating proxy_ieee802dot11MgmtGroup...
RouterProxySnmpAgent populating proxy_clabWIFIMibGroup...
RouterProxySnmpAgent populating proxy_wifiFactoryGroup...
RouterProxySnmpAgent populating proxy_moca11Group...
RouterProxySnmpAgent populating proxy_dot3Group...
MIB population complete!
Done w/ deferred traps.
eRouter Proxy Agent installing engine ID...
eRouter Proxy Agent installing context...
Discovering primary virtual CPE interface.
Parsing interface number from ifName
Updating 'eth0' (0x65746830) virt hal ifDescr = 'Ethernet CPE Interface',
ifPhysAddress = fc:4a:e9:de:ad:02
BcmRouterProxyNiHalIf::GetSingletonInstance: WARNING - the singleton is NULL, and
someone is accessing it!
Setting proxy community to public/private
Done w/ deferred traps.
eMTA Proxy Agent installing engine ID...
eMTA Proxy Agent installing context...
Received RG Event 0x80000001 State 0x1
eRouter Linux WAN Down
Checking for cable cut...

[00:00:18 01/01/1970] [eRouterMsgPipe] eRouterMsgPipe::UpdateIpNetToMediaEntry:


(eRouterMsgPipe) eRouter IP address:0.0.0.0
Plant power is -28.75

Cable disconnected

+-----------------------------------------------------------------------+
| Portions of this product contain open source software and are subject |
| to terms of the applicable license as specified in the release notes. |
+-----------------------------------------------------------------------+

*
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* * * *
* * * * * * ***
* * * * * * * * *******************
* * * * * *
* *

Broadcom Corporation Reference Design

+----------------------------------------------------------------------------------
--------------+

| _/_/ _/ _/

| _/ _/ _/_/ _/_/ DOCSIS Cable Modem

| _/ _/ _/ _/

| _/ _/ _/
| _/ _/ _/

| _/ _/ _/ _/

| _/_/ _/ _/

| |

| Copyright (c) 1999 - 2023 Broadcom Corporation

| |

| Revision: Prod_19.3_d31

| |

| Features: Infinity601V Console TelnetConsole SshConsole Nonvol Fat HeapManager


SNMP

| Features: Networking IPv6 (script Infinity601V) PNM

| Features: AckCel(tm) DOCSIS 3.1 Propane(tm) CM SNMP w/Factory MIB Support CM


Vendor

| Features: Extension FAP EURO Production ECN's current to CW125


CmHalLib=19.50(power)

| Features: PID=0x3390 BIDnotread Bootloader-Rev=2.7.0alpha4

| Features: Bootloader-Compression-Support=0x11 MANUFACT_BITS=0x5

| Features: IopLib-Rev=Prod_19.3_d31-2019-10-17.32.1 LEAP-Rev=12.2.7023.0

| Features: IPv6 Stack Version 1.2.0

| Features: eCos Console Cmds, (no Idle Loop Profiler)

+----------------------------------------------------------------------------------
--------------+

| Broadcom Data-Only CM Vendor Extension

| |

| Copyright (c) 1999 - 2023 Broadcom Corporation

| |

| Revision: Prod_19.3_d31

| |

| Features: DHCP Server HTTP Server OSS2-N-03025 Visualization LED Controller

+----------------------------------------------------------------------------------
--------------+

| _/ _/ _/_/_/ _/
| _/_/ _/_/ _/ _/_/ Embedded MTA

| _/ _/ _/ _/ _/ _/

| _/ _/ _/ _/ _/

| _/ _/ _/ _/_/__/ CableLabs Certified

| _/ _/ _/ _/ _/ PacketCable Certified

| _/ _/ _/ _/ _/

| |

| Copyright (c) 1999 - 2023 Broadcom Corporation

| |

| Revision: Prod_19.3

| |

| Features: Infinity601V (EuroPacketCable) eCos

| Features: OPTIONS: IPv4 IPSEC

| Features: MSO Build Option: Default

| Features: MSO Config Option: Generic

| Features: LDX-APP: dspApp3390_all_codecs-apm

| Features: PROTOCOL: NCS

| Features: PacketCable-v1.5

| Features: LDX VERSION: 31.181.0

| Features: XCHG VERSION: 193.0 - Built: Sep 17 2019 13:00:40

| Features: XDRV VERSION: 193.0 - Built: Sep 17 2019 13:00:18

| Features:

| Features: Build options:

| Features: locale=ch dspapp=all_codecs euro=1 pktc_ver=15 bbn=1

+----------------------------------------------------------------------------------
--------------+

| Build Date : Jul 20 2023

| Build Time : 14:43:59 (+0800)

| Build By : raiderlu

| Build Products :
| Build Processors: 3390

| Build Parameters: num_sids 16 docsis 31 pid 9055 c 45 mtaipv6 0 j 4 outputdir

| Build Parameters: Infinity601V_pc15_unimacbyoi_Bx imagename


Infinity601V_pc15_unimacbyoi_Bx

| Build Parameters: chipRev Bx swver 012

| Build Targets :

| Build Tag : master

| Image Path :
/home/raiderlu/Work/supergit/download/openbfc19.3/cm/rbb_cm/rbb_cm_src/Vend

| Image Path : orCTI/bash/Infinity601V_pc15_unimacbyoi_Bx

| Image Name : Infinity601V_pc15_unimacbyoi_Bx_sto.bin

| Build Command : Infinity601V bbn eu nosigtls nosipdbg nodect ipv6 mtaipv6 0 j 4


outputdir

| Build Command : Infinity601V_pc15_unimacbyoi_Bx imagename


Infinity601V_pc15_unimacbyoi_Bx

| Build Command : noslim unimacbyoi chipRev Bx map swver 012

| Build Options : cmd_help_text demangle deps dualbuild factorymibs http


mgmtmibs

| Build Options : openssh76p1 pktc useformregistrar openssl quiet vpn warn_error


msc us rdiag

| Build Options : console vidcheck use_unimac0 d30 smisb spectrum_analyzer uda


fpm512 newleds

| Build Options : cacheopt power fap_assist multiprocmon thermal_monitor cmvendor


emta telnet

| Build Options : ip_rnvol itc rtrproxy virtnihal linux_erouter monolith


dualcmkey dualmode

| Build Options : turbo_wifi bbn eu ipv6 unimacbyoi map

+----------------------------------------------------------------------------------
--------------+

*
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* * * *
* * * * * * ***
* * * * * * * * *******************
* * * * * *
* *

Broadcom Corporation Reference Design

+----------------------------------------------------------------------------------
--------------+
|
|
| LATTICE
|
|
|
| Copyright (c) 1999 - 2023 Broadcom Corporation
|
|
|

| Revision : Prod_19.3
|
|

+----------------------------------------------------------------------------------
--------------+

| Build Date : Jul 20 2023

| Build Time : 14:52:07 (+0800)

| Build Path :
/home/raiderlu/Work/supergit/download/openbfc19.3/rbb_lattice/rg_apps/lattice

| Image Path :
/home/raiderlu/Work/supergit/download/openbfc19.3/rbb_lattice/images

| Build By : raiderlu

| Build Options : Build_System Build_Cm Build_Mta Build_Ethernet


Build_PacketAcceleration

| Build Options : Build_SpeedTest Build_Thermal Build_LAG Build_Gpio BUILD_BRIDGE

+----------------------------------------------------------------------------------
--------------+
| Linux Kernel
|
|
|
| Revision : 4.9.135-Prod_19.3#1 SMP Thu Jul 20 14:48:07 CST 2023

| Device Tree : rg.3390v0-vcm.dtb


|
|

+----------------------------------------------------------------------------------
--------------+
| RUNNER
|
|
|
| Copyright (c) 1999 - 2023 Broadcom Corporation
|
|
|

| Revision : rdp_gen_19.3.0.8

+----------------------------------------------------------------------------------
--------------+
| BOLT
|
|
|
| Copyright (c) 1999 - 2023 Broadcom Corporation
|
|
|

| Revision : 5.0

| Build Timestamp: 2021-07-30 13:19:19

| Build Tag : v5.00_B1

| Build By : raiderlu@raiderlu-ThinkCentre-M90t

| Revision(FSBL) : 5.0

+----------------------------------------------------------------------------------
--------------+

Starting TFTP of CM Version file!

Opening file 'cmversion.txt' on 172.31.255.40 for writing...


Informing RG CM energy detected = 0

Tftp transfer CM version file open successful!

Tftp transfer CM version file is complete!

Running the system...

Beginning Cable Modem operation...


Scanning for a downstream channel...
[00:00:21 01/01/1970] [CmDocsisCtlThread] BcmCmDownstreamScan::StartScan: Starting
DS scan

Type 'help' or '?' for a list of commands...

CM> Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)


Scanning 258.000 MHz PLC
Scanning 259.000 MHz PLC
Scanning 260.000 MHz PLC
Scanning 261.000 MHz PLC
Scanning 262.000 MHz PLC
Scanning 263.000 MHz PLC
Scanning 264.000 MHz PLC
Scanning 265.000 MHz PLC
Scanning 266.000 MHz PLC
Scanning 267.000 MHz PLC
Scanning 268.000 MHz PLC
Scanning 269.000 MHz PLC
Scanning 270.000 MHz PLC
Scanning 271.000 MHz PLC
Scanning 272.000 MHz PLC
Scanning 273.000 MHz PLC
Scanning 274.000 MHz PLC
Scanning 275.000 MHz PLC
Scanning 276.000 MHz PLC
Scanning 277.000 MHz PLC
Scanning 278.000 MHz PLC
cScanning 279.000 MHz PLC
Scanning 280.000 MHz PLC
Scanning 281.000 MHz PLC
Scanning 282.000 MHz PLC
dScanning 283.000 MHz PLC
Scanning 284.000 MHz PLC
Scanning 285.000 MHz PLC
c Scanning 286.000 MHz PLC
/Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
dScanning 287.000 MHz PLC
Scanning 288.000 MHz PLC
Scanning 289.000 MHz PLC
Scanning 290.000 MHz PLC
Scanning 291.000 MHz PLC
oScanning 292.000 MHz PLC
cScanning 293.000 MHz PLC
Scanning 294.000 MHz PLC
Scanning 295.000 MHz PLC
Scanning 296.000 MHz PLC
CM> cdc /docs
Scanning 297.000 MHz PLC

Error - Unknown command: 'cdc /docs'

CM> Scanning 298.000 MHz PLC


Scanning 299.000 MHz PLC
cScanning 300.000 MHz PLC
Scanning 301.000 MHz PLC
CM> call
ERROR - required parameter ( function|malloc|free) was not specified!

COMMAND: call

USAGE: call function|malloc|free [-r] [-a FuncAddress] [Param1] [Param2] [Param3]


[Param4] [Param5] [Param6] [Param7] [Param8] [Param9]

DESCRIPTION:
This command allows you to call an arbitrary function in the code. It also
provides specific support for common functions (such as malloc/free). When
calling a function, you specify the address of the function (which must come
from the MAP file for your image). You can also specify up to 9 parameters
Scanning 302.000 MHz PLC
to the function. Additionally, you can specify whether or not the function
returns anything, allowing the return value to be printed.

NOTE: While this command is very useful for tricky debug situations in the
field, IT IS SERIOUSLY UNSAFE! You can easily crash the system you are
trying to debug if you specify a function address or parameter incorrectly.
You could even brick the system if the function happens to write to permanent
nonvol at the wrong time, or corrupts the bootloader, or...you get the
picture. Make sure you are working with a valid MAP file for the image that
is running, as this is your only hope for getting things right! Also, make
sure you provide exactly the number of function parameters that are needed
Scanning 303.000 MHz PLC
for the function. Entering too few or too many parameters will cause
registers and stack state to be wrong for the function, and will lead to
mayhem.

Functions that require more than 9 parameters cannot be called, and they are
unlikely candidates for this type of thing anyway. We chose to allow 9
because C++ methods use the first parameter as the object pointer (e.g. the
'this' pointer), which allows up to 8 real parameters to the method.

The first command parameter must be one of the following:


'function' - causes the function address (specified by -a) to be called
with however many function parameters are specified.
'malloc' - causes malloc() to be called with the value specified by the
first function parameter.
'free' - causes free() to be called with the value specified by the first
function parameter.

The remaining command parameters are:


-r indicates that the function returns a value, and that the return value
should be printed. If left out, the return value (if any) is not printed.
Scanning 304.000 MHz PLC
The value is not interpreted, it is simply printed as a uint32 value in
decimal and hex.
-a specifies the address of the function to be called. This is only used
for 'call function', since the other named functions know which address they
are calling.
Param1..9 specify up to 9 parameters to be passed to the function. Make
sure you specify the correct number of function parameters (and that they are
in the right order). Note that when calling C++ methods, the first parameter
is used to hold the object instance (e.g. the 'this' pointer). For functions
that take no parameters, don't specify any parameters here.

One of the interesting aspects of this command is that it allows you to


Scanning 305.000 MHz PLC
allocate memory, write to it, call a function with it, then free it.

EXAMPLES:
Calls malloc(1024); the allocated memory address is printed:
call malloc -r 1024
Calls free(0x80001234) to free memory that had previously been allocated:
call free 0x80001234
Calls the function at address 0x80010080 with no parameters. Return value
not printed:
call func -a 0x80010080
Calls the function at address 0x800100a0 with a single parameter (value 0x01)
and prints the return value:
call func -r -a 0x800100a0 0x01
Calls the function at address 0x80020020 with 4 parameters, and prints the
return value:
call func -r -a 0x80020020 0x01 0x0202 0x030303 0x04040404
Calls the function at address 0x80020020 with 9 parameters, and prints the
Scanning 306.000 MHz PLC
return value:
call func -r -a 0x80020020 0x11 0x22 0x33 0x44 0x55 0x66 0x77 0x88 0x99

CM>
CM>
CM> Scanning 307.000 MHz PLC
Scanning 308.000 MHz PLC
CM>
CM> Scanning 309.000 MHz PLC
Scanning 310.000 MHz PLC
Scanning 311.000 MHz PLC
CM>
CM> Scanning 312.000 MHz PLC
Scanning 313.000 MHz PLC
sScanning 314.000 MHz PLC
Scanning 315.000 MHz PLC
cScanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
CM> sc

Error - Unknown command: 'sc'

CM> Scanning 316.000 MHz PLC


Scanning 317.000 MHz PLC
CM>
CM> Scanning 318.000 MHz PLC
Scanning 319.000 MHz PLC
Scanning 320.000 MHz PLC
CM>
CM> Scanning 321.000 MHz PLC
Scanning 322.000 MHz PLC
Scanning 323.000 MHz PLC
CM>
CM> Scanning 324.000 MHz PLC
Scanning 325.000 MHz PLC
CM>
CM> Scanning 326.000 MHz PLC
Scanning 327.000 MHz PLC
cScanning 328.000 MHz PLC
Scanning 329.000 MHz PLC
Scanning 330.000 MHz PLC
dScanning 331.000 MHz PLC
Scanning 332.000 MHz PLC
Scanning 333.000 MHz PLC
Scanning 334.000 MHz PLC
Scanning 335.000 MHz PLC
Scanning 336.000 MHz PLC
Scanning 337.000 MHz PLC
/Scanning 338.000 MHz PLC
Scanning 339.000 MHz PLC
Scanning 340.000 MHz PLC
dScanning 341.000 MHz PLC
Scanning 342.000 MHz PLC
Scanning 343.000 MHz PLC
Scanning 344.000 MHz PLC
ocScanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 345.000 MHz PLC
Scanning 346.000 MHz PLC

Active Command Table: CM DOCSIS Control Thread Commands (docsis_ctl)

CM -> docsis_ctl

CM/DocsisCtl> Scanning 347.000 MHz PLC


sScanning 348.000 MHz PLC
Scanning 349.000 MHz PLC
Scanning 350.000 MHz PLC
Scanning 351.000 MHz PLC
Scanning 352.000 MHz PLC
cScanning 353.000 MHz PLC
Scanning 354.000 MHz PLC
CM/DocsisCtl> scan_stopScanning 355.000 MHz PLC

CM/DocsisCtl> Scanning 356.000 MHz PLC


Scan stopped...

CM/DocsisCtl>
CM/DocsisCtl>
CM/DocsisCtl>
CM/DocsisCtl>
CM/DocsisCtl>
CM/DocsisCtl> cd /cust/cti

Active Command Table: Console Commands (cti)

CM -> cust -> cti

CM/cust/cti> showcert

-- 1st Cert/key --
BPI Public Key = 0 bytes
BPI Private Key = 0 bytes
BPI+ Root Public Key = 0 bytes
BPI+ CA Certificate = 0 bytes
BPI+ CM Certificate = 0 bytes

Upgraded BPI+ Root Public Key = 0 bytes


Upgraded BPI+ CA Certificate = 0 bytes

-- 2nd Cert/key --
BPI Public Key = 0 bytes
BPI Private Key = 0 bytes
BPI+ Root Public Key = 0 bytes
BPI+ CA Certificate = 0 bytes
BPI+ CM Certificate = 0 bytes

CM/cust/cti> cd /cm

Active Command Table: CM DOCSIS HAL Commands (cm_hal)

CM -> cm_hal

CM/CmHal> diplexer_settings

SWITCHABLE diplexer settings


----------------------------
0: US:(5 MHz..85 MHz) DS:(108 MHz..1218 MHz)
1: US:(5 MHz..204 MHz) DS:(258 MHz..1218 MHz) (ACTIVE)

Diplexer driver settings


------------------------
Diplexer driver uses GPIO 34, STANDARD sense.
Current diplexer driver selection is HIGH

CM/CmHal> diplexer_settings 0

>>DpXer Select0 active: GPIO34 set to 1<<


>>Sending 16 DsCal Offsets to Leap<<
Activated HW diplexer 0: US:(5 MHz..85 MHz) DS:(108 MHz..1218 MHz) (ACTIVE)
SWITCHABLE diplexer settings
----------------------------
0: US:(5 MHz..85 MHz) DS:(108 MHz..1218 MHz) (ACTIVE)
1: US:(5 MHz..204 MHz) DS:(258 MHz..1218 MHz)

Diplexer driver settings


------------------------
Diplexer driver uses GPIO 34, STANDARD sense.
Current diplexer driver selection is LOW

CM/CmHal> diplexer_settings 1

>>DpXer Select1 active: GPIO34 set to 0<<


>>Sending 16 DsCal Offsets to Leap<<
Activated HW diplexer 1: US:(5 MHz..204 MHz) DS:(258 MHz..1218 MHz) (ACTIVE)
SWITCHABLE diplexer settings
----------------------------
0: US:(5 MHz..85 MHz) DS:(108 MHz..1218 MHz)
1: US:(5 MHz..204 MHz) DS:(258 MHz..1218 MHz) (ACTIVE)

Diplexer driver settings


------------------------
Diplexer driver uses GPIO 34, STANDARD sense.
Current diplexer driver selection is HIGH
CM/CmHal> cd /doc

Active Command Table: CM DOCSIS Control Thread Commands (docsis_ctl)

CM -> docsis_ctl

CM/DocsisCtl> cd /n/snmp

Active Command Table: CM SNMP NonVol Commands (snmp_cm)

CM -> non-vol -> snmp_cm

CM/NonVol/CM SNMP NonVol> show

+-------------------------+
| CM SNMP NonVol Settings |
+-------------------------+
Magic Number = 0x736e6d70 'snmp'
Version (Permanent) = 0.4
Version (Dynamic) = 0.8
Bytes used (Permanent) = 1263
Bytes used (Dynamic) = 1060
Is Default (Permanent) = 0
Is Default (Dynamic) = 0

Is Manufactured (Permanent) = 0
(NOT SET: docsDevSerialNumber)
Is Manufactured (Dynamic) = 1

CM SNMP Permanent NonVol Settings:

AllowConfiguration = 0
docsDevSerialNumber =
Max Download Tries = 4

CM SNMP Dynamic NonVol Settings:

sysContact =
sysName =
sysLocation =
docsDevSwAdminStatus = 2 (allowProvisioningUpgrade)
docsDevSwOperStatus = 5 (other)
docsDevSwFilename =
docsDevSwServer = 0.0.0.0
Number of Download tries = 0
snmpEngineBoots = 136
Rescue image sysDescr =
Rescue image docsDevSwCurrentVers =
Rescue image bitmask = 0x1

CM SNMP Compile-time Settings:


** These are not stored in NV and may not be changed at runtime.
** They must be specified in VendorNonVolDefaults.h

Vendor Name = CastleNet


BPI31 Vendor Name = CastleNet
sysDescr = Infinity601V <<HW_REV: A0; VENDOR: CastleNet; BOOTR:
2.7.0alpha4; SW_REV: 0261_19331.M.012; MODEL: Infinity601V>>
sysObjectID = 1.3.6.1.4.1.4413.2.1.2.1.9055
sysORID.1 = 1.3.6.1.4.1.4413.2.3.2.6
sysORDescr.1 = An agent which supports all MIBs required by the
DOCSIS 3.1 OSS specification.
sysServices = 0x4a
docsDevSwCurrentVers = 0261_19331.M.012

CM/NonVol/CM SNMP NonVol> cd /doc

Active Command Table: CM DOCSIS Control Thread Commands (docsis_ctl)

CM -> docsis_ctl

CM/DocsisCtl> goto_ds 897

Moving to Downstream Frequency 897000000 Hz.


[00:05:06 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::Reset:
(CmDocsisCtlThread) DefaultSnmpAgentClass::RestartPendingEvent for Vendor CM
Agent w/ BRCM Factory Support
Vendor CM Agent w/ BRCM Factory Support updating ifTableLastChange.
Vendor CM Agent w/ BRCM Factory Support resetting to default state.
Vendor CM Agent w/ BRCM Factory Support destroying users...
Vendor CM Agent w/ BRCM Factory Support destroying notifies...
Vendor CM Agent w/ BRCM Factory Support destroying views...

CM/DocsisCtl> Allowing DOCS-CABLE-DEVICE-MIB IP filters.


Vendor CM Agent w/ BRCM Factory Support deferring traps.
Received RG Event 0x80000001 State 0x1
eRouter Linux WAN Down
[00:05:06 01/01/1970] [eRouterMsgPipe] eRouterMsgPipe::UpdateIpNetToMediaEntry:
(eRouterMsgPipe) eRouter IP address:0.0.0.0
00:05:06.350 01/01/1970 (CALC) mtaCmStatusInfo() - MTA is Signaled: *NOT-
OPERATIONAL* (Stat=0x1) emtaCurState = 0.
EmtaSnmpAgent::SoftReset
Pausing trap thread
emta factory agentResetting to default state.
emta factory agent destroying users...
emta factory agent destroying notifies...
emta factory agent destroying views...
emta factory agent entering RFC-2576 Coexistence security mode.
emta factory agent entering Basic/Hybrid flow provisioning mode.
Resuming trap thread
Stopping DHCP/ToD/TFTP (client requested)...
[00:05:06 01/01/1970] [CmDocsisIpThread] BcmEcosIpHalIf::RemoveIpv6Address: (IP
Stack1 HalIf) ERROR - Failed to remove IPv6 address fe80::fe4a:e9ff:fede:ad88/64
from the stack!
[00:05:06 01/01/1970] [CmDocsisIpThread] BcmDhcpV6ClientIf::ReleaseAddresses:
(DHCPv6 ClientIf for IP Stack1) ERROR - IA state is initial; there is no address to
release.
BcmDocsis3DsMacEnableMulticastDsidForwarding 0; primary DS = 0
SCQAM DSID filter control = 0x00
OFDM DSID filter control = 0x01
Deleting DOCSIS 1.0 CoS Settings for SID 0
[00:05:06 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows:
(DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along
with associated Classifiers and PHS rules...
[00:05:06 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState:
(CmDocsisCtlThread)
[00:05:06 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Primary SID for usHwChannel 0 to 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 1
Updating US chan 8 data Profile test msg for Sid: 0x0.
Updating US chan 9 data Profile test msg for Sid: 0x0.
CM/DocsisCtl> BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=false
[00:05:07 01/01/1970] [CmDocsisCtlThread] BcmCmMultiDsHelper::PreRegDsChanChange:
target freq hz = 897000000
reason string = ConsoleCmdOverride
CmInitReason = 1

Starting DS scanning at 897000000 Hz...


[00:05:07 01/01/1970] [CmDocsisCtlThread] BcmCmDownstreamScan::StartScan: Starting
DS scan
Scanning 897.000 MHz PLC/SC-QAM (ConsoleCmdOverride) locked PLC
[00:05:07 01/01/1970] [CmDocsisCtlThread] BcmCmDsChanOfdm::DsLockOk:
(BcmCmDsChanOfdm) hwRxId=32 freq=0 dcid=0 PLC found
[00:05:07 01/01/1970] [CmDocsisCtlThread] BcmCmDsChanOfdm::StartOcdDpdGathering:
(BcmCmDsChanOfdm) starting OCD/DPD gathering on PLC
[00:05:07 01/01/1970] [CmDocsisCtlThread] BcmCmDsChanOfdm::OcdSetsRx:
(BcmCmDsChanOfdm) hwRxId=32 dcid=0
[00:05:07 01/01/1970] [CmDocsisCtlThread] BcmCmDsChanOfdm::DpdSetsRx:
(BcmCmDsChanOfdm) Received DPD on hwRxId=32 dcid=0 for assigned Profile NCP
[00:05:07 01/01/1970] [CmDocsisCtlThread] BcmCmDsChanOfdm::DpdSetsRx:
(BcmCmDsChanOfdm) Received DPD on hwRxId=32 dcid=0 for assigned Profile A
[00:05:07 01/01/1970] [CmDocsisCtlThread]
BcmCmDsChanOfdm::DetectOcdDpdGatheringPlcDone: (BcmCmDsChanOfdm) hwRxId=32 dcid=0
OCD/DPD gathered via PLC. install OCD settings.
OCD/DPD Filtering being configured for hwRxId=32 on FilCh=0[PLC=0/ProfA=1] ->
filter enable = 1. TimeMs=308727
[00:05:07 01/01/1970] [CmDocsisCtlThread] BcmCmDsChanOfdm::OcdInstallOk:
(BcmCmDsChanOfdm) hwRxId=32 dcid=159 OCD installed.
[00:05:07 01/01/1970] [CmDocsisCtlThread] BcmCmDsOfdmProfileState::InstallDpdSets:
HwRxId=32: installing DPD for profile NCP
[00:05:08 01/01/1970] [CmDocsisCtlThread] BcmCmDsOfdmProfileState::InstallDpdSets:
HwRxId=32: installing DPD for profile A
Ofdm0: profile0 LOCK in 2 ms!
[00:05:08 01/01/1970] [CmDocsisCtlThread] BcmCmDsOfdmProfileState::FecLockOk:
hwRxId=32 dcid=159 profId=255 (NCP)
CM/DocsisCtl> [00:05:09 01/01/1970] [CmDocsisCtlThread]
BcmCmDsOfdmProfileState::FecLockOk: hwRxId=32 dcid=159 profId=0 (A)
[00:05:09 01/01/1970] [CmDocsisCtlThread]
BcmCmMacDomainSetsState::StartDsMacMddInit:
**********************************************
Waiting for MDDs...
**********************************************

Informing RG CM energy detected = 1


CM/DocsisCtl> [00:05:15 01/01/1970] [CmDocsisCtlThread]
BcmCmMacDomainSetsState::TmNoMddEvent:
MDD timeout during kGatherInitialPriDsMddSets

BcmCmDocsisCtlMsgACT::HandleEvent() @time=315040 event_code=10


(kCmPriDsMddSetsNotRx)

***************************************************************
No MDD timeout ==> If no MDDs are detected on the candidate
Primary Downstream Channel, then the CM MUST abort the attempt
to utilize the current downstream channel

***************************************************************

[00:05:15 01/01/1970] [CmDocsisCtlThread]


BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) Purging DS
frequency 897000000 from current scan pass due to pre-registration restart error
[00:05:15 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) reinit MAC #1:
NoMddTimeout

[00:05:15 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::Reset:


(CmDocsisCtlThread) DefaultSnmpAgentClass::RestartPendingEvent for Vendor CM
Agent w/ BRCM Factory Support
Logging event: Lost MDD Timeout;CM-MAC=fc:4a:e9:de:ad:88;CMTS-
MAC=00:00:00:00:00:00;CM-QOS=1.1;CM-VER=3.1;
Vendor CM Agent w/ BRCM Factory Support updating ifTableLastChange.
Vendor CM Agent w/ BRCM Factory Support resetting to default state.
Vendor CM Agent w/ BRCM Factory Support destroying users...
Vendor CM Agent w/ BRCM Factory Support destroying notifies...
Vendor CM Agent w/ BRCM Factory Support destroying views...
Allowing DOCS-CABLE-DEVICE-MIB IP filters.
Vendor CM Agent w/ BRCM Factory Support deferring traps.
Received RG Event 0x80000001 State 0x1
eRouter Linux WAN Down
[00:05:15 01/01/1970] [eRouterMsgPipe] eRouterMsgPipe::UpdateIpNetToMediaEntry:
(eRouterMsgPipe) eRouter IP address:0.0.0.0
00:05:15.320 01/01/1970 (CALC) mtaCmStatusInfo() - MTA is Signaled: *NOT-
OPERATIONAL* (Stat=0x1) emtaCurState = 0.
EmtaSnmpAgent::SoftReset
Pausing trap thread
emta factory agentResetting to default state.
emta factory agent destroying users...
emta factory agent destroying notifies...
emta factory agent destroying views...
emta factory agent entering RFC-2576 Coexistence security mode.
emta factory agent entering Basic/Hybrid flow provisioning mode.
Resuming trap thread
Stopping DHCP/ToD/TFTP (client requested)...
[00:05:15 01/01/1970] [CmDocsisIpThread] BcmEcosIpHalIf::RemoveIpv6Address: (IP
Stack1 HalIf) ERROR - Failed to remove IPv6 address fe80::fe4a:e9ff:fede:ad88/64
from the stack!
[00:05:15 01/01/1970] [CmDocsisIpThread] BcmDhcpV6ClientIf::ReleaseAddresses:
(DHCPv6 ClientIf for IP Stack1) ERROR - IA state is initial; there is no address to
release.
BcmDocsis3DsMacEnableMulticastDsidForwarding 0; primary DS = 0
SCQAM DSID filter control = 0x00
OFDM DSID filter control = 0x01
Deleting DOCSIS 1.0 CoS Settings for SID 0
[00:05:15 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows:
(DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along
with associated Classifiers and PHS rules...
[00:05:15 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState:
(CmDocsisCtlThread)
[00:05:15 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Primary SID for usHwChannel 0 to 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 1
Updating US chan 8 data Profile test msg for Sid: 0x0.
Updating US chan 9 data Profile test msg for Sid: 0x0.
CM/DocsisCtl> BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=false
[00:05:16 01/01/1970] [CmDocsisCtlThread] BcmCmMultiDsHelper::PreRegDsChanChange:
target freq hz = 0
reason string = ErrorRecovery
CmInitReason = 1

Starting DS scanning...
[00:05:16 01/01/1970] [CmDocsisCtlThread] BcmCmDownstreamScan::StartScan: Starting
DS scan
Scanning 357.000 MHz PLC
Scanning 358.000 MHz PLC
CM/DocsisCtl> Scanning 359.000 MHz PLC
Scanning 360.000 MHz PLC
Scanning 361.000 MHz PLC locked PLC
[00:05:16 01/01/1970] [CmDocsisCtlThread] BcmCmDsChanOfdm::DsLockOk:
(BcmCmDsChanOfdm) hwRxId=32 freq=0 dcid=0 PLC found
[00:05:16 01/01/1970] [CmDocsisCtlThread] BcmCmDsChanOfdm::StartOcdDpdGathering:
(BcmCmDsChanOfdm) starting OCD/DPD gathering on PLC
OCD/DPD Filtering being configured for hwRxId=32 on FilCh=0[PLC=0/ProfA=1] ->
filter enable = 0. TimeMs=0
[00:05:17 01/01/1970] [CmDocsisCtlThread] BcmCmDsChanOfdm::OcdSetsRx:
(BcmCmDsChanOfdm) hwRxId=32 dcid=0
[00:05:17 01/01/1970] [CmDocsisCtlThread] BcmCmDsChanOfdm::DpdSetsRx:
(BcmCmDsChanOfdm) Received DPD on hwRxId=32 dcid=0 for assigned Profile NCP
[00:05:17 01/01/1970] [CmDocsisCtlThread] BcmCmDsChanOfdm::DpdSetsRx:
(BcmCmDsChanOfdm) Received DPD on hwRxId=32 dcid=0 for assigned Profile A
[00:05:17 01/01/1970] [CmDocsisCtlThread]
BcmCmDsChanOfdm::DetectOcdDpdGatheringPlcDone: (BcmCmDsChanOfdm) hwRxId=32 dcid=0
OCD/DPD gathered via PLC. install OCD settings.
OCD/DPD Filtering being configured for hwRxId=32 on FilCh=0[PLC=0/ProfA=1] ->
filter enable = 1. TimeMs=194
[00:05:17 01/01/1970] [CmDocsisCtlThread] BcmCmDsChanOfdm::OcdInstallOk:
(BcmCmDsChanOfdm) hwRxId=32 dcid=160 OCD installed.
[00:05:17 01/01/1970] [CmDocsisCtlThread] BcmCmDsOfdmProfileState::InstallDpdSets:
HwRxId=32: installing DPD for profile NCP
CM/DocsisCtl> [00:05:18 01/01/1970] [CmDocsisCtlThread]
BcmCmDsOfdmProfileState::InstallDpdSets: HwRxId=32: installing DPD for profile A
Ofdm0: profile0 LOCK in 2 ms!
[00:05:18 01/01/1970] [CmDocsisCtlThread] BcmCmDsOfdmProfileState::FecLockOk:
hwRxId=32 dcid=160 profId=255 (NCP)
CM/DocsisCtl> [00:05:19 01/01/1970] [CmDocsisCtlThread]
BcmCmDsOfdmProfileState::FecLockOk: hwRxId=32 dcid=160 profId=0 (A)
[00:05:19 01/01/1970] [CmDocsisCtlThread]
BcmCmMacDomainSetsState::StartDsMacMddInit:
**********************************************
Waiting for MDDs...
**********************************************

CM/DocsisCtl> [00:05:25 01/01/1970] [CmDocsisCtlThread]


BcmCmMacDomainSetsState::TmNoMddEvent:
MDD timeout during kGatherInitialPriDsMddSets

BcmCmDocsisCtlMsgACT::HandleEvent() @time=325040 event_code=10


(kCmPriDsMddSetsNotRx)

***************************************************************
No MDD timeout ==> If no MDDs are detected on the candidate
Primary Downstream Channel, then the CM MUST abort the attempt
to utilize the current downstream channel

***************************************************************

[00:05:25 01/01/1970] [CmDocsisCtlThread]


BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) Purging DS
frequency 361000000 from current scan pass due to pre-registration restart error
[00:05:25 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) reinit MAC #2:
NoMddTimeout

[00:05:25 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::Reset:


(CmDocsisCtlThread) DefaultSnmpAgentClass::RestartPendingEvent for Vendor CM
Agent w/ BRCM Factory Support
Logging event: Lost MDD Timeout;CM-MAC=fc:4a:e9:de:ad:88;CMTS-
MAC=00:00:00:00:00:00;CM-QOS=1.1;CM-VER=3.1;
Vendor CM Agent w/ BRCM Factory Support updating ifTableLastChange.
Vendor CM Agent w/ BRCM Factory Support resetting to default state.
Vendor CM Agent w/ BRCM Factory Support destroying users...
Vendor CM Agent w/ BRCM Factory Support destroying notifies...
Vendor CM Agent w/ BRCM Factory Support destroying views...
Allowing DOCS-CABLE-DEVICE-MIB IP filters.
Vendor CM Agent w/ BRCM Factory Support deferring traps.
Received RG Event 0x80000001 State 0x1
eRouter Linux WAN Down
[00:05:25 01/01/1970] [eRouterMsgPipe] eRouterMsgPipe::UpdateIpNetToMediaEntry:
(eRouterMsgPipe) eRouter IP address:0.0.0.0
00:05:25.320 01/01/1970 (CALC) mtaCmStatusInfo() - MTA is Signaled: *NOT-
OPERATIONAL* (Stat=0x1) emtaCurState = 0.
EmtaSnmpAgent::SoftReset
Pausing trap thread
emta factory agentResetting to default state.
emta factory agent destroying users...
emta factory agent destroying notifies...
emta factory agent destroying views...
emta factory agent entering RFC-2576 Coexistence security mode.
emta factory agent entering Basic/Hybrid flow provisioning mode.
Resuming trap thread
Stopping DHCP/ToD/TFTP (client requested)...
[00:05:25 01/01/1970] [CmDocsisIpThread] BcmEcosIpHalIf::RemoveIpv6Address: (IP
Stack1 HalIf) ERROR - Failed to remove IPv6 address fe80::fe4a:e9ff:fede:ad88/64
from the stack!
[00:05:25 01/01/1970] [CmDocsisIpThread] BcmDhcpV6ClientIf::ReleaseAddresses:
(DHCPv6 ClientIf for IP Stack1) ERROR - IA state is initial; there is no address to
release.
BcmDocsis3DsMacEnableMulticastDsidForwarding 0; primary DS = 0
SCQAM DSID filter control = 0x00
OFDM DSID filter control = 0x01
Deleting DOCSIS 1.0 CoS Settings for SID 0
[00:05:25 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows:
(DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along
with associated Classifiers and PHS rules...
[00:05:25 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState:
(CmDocsisCtlThread)
[00:05:25 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Primary SID for usHwChannel 0 to 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 1
Updating US chan 8 data Profile test msg for Sid: 0x0.
Updating US chan 9 data Profile test msg for Sid: 0x0.
CM/DocsisCtl> BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=false
[00:05:26 01/01/1970] [CmDocsisCtlThread] BcmCmMultiDsHelper::PreRegDsChanChange:
target freq hz = 0
reason string = ErrorRecovery
CmInitReason = 1

Starting DS scanning...
[00:05:26 01/01/1970] [CmDocsisCtlThread] BcmCmDownstreamScan::StartScan: Starting
DS scan
Scanning 362.000 MHz PLC
Scanning 363.000 MHz PLC
CM/DocsisCtl> Scanning 364.000 MHz PLC
Scanning 365.000 MHz PLC
Scanning 366.000 MHz PLC
Scanning 367.000 MHz PLC
Scanning 368.000 MHz PLC
Scanning 369.000 MHz PLC
Scanning 370.000 MHz PLC
Scanning 371.000 MHz PLC
Scanning 372.000 MHz PLC
Scanning 373.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 374.000 MHz PLC
Scanning 375.000 MHz PLC
Scanning 376.000 MHz PLC
Scanning 377.000 MHz PLC
Scanning 378.000 MHz PLC
Scanning 379.000 MHz PLC
Scanning 380.000 MHz PLC
Scanning 381.000 MHz PLC
Scanning 382.000 MHz PLC
Scanning 383.000 MHz PLC
Scanning 384.000 MHz PLC
Scanning 385.000 MHz PLC
Scanning 386.000 MHz PLC
Scanning 387.000 MHz PLC
Scanning 388.000 MHz PLC
Scanning 389.000 MHz PLC
Scanning 390.000 MHz PLC
Scanning 391.000 MHz PLC
Scanning 392.000 MHz PLC
Scanning 393.000 MHz PLC
Scanning 394.000 MHz PLC
Scanning 395.000 MHz PLC
Scanning 396.000 MHz PLC
Scanning 397.000 MHz PLC
Scanning 398.000 MHz PLC
Scanning 399.000 MHz PLC
Scanning 400.000 MHz PLC
Scanning 401.000 MHz PLC
Scanning 402.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 403.000 MHz PLC
Scanning 404.000 MHz PLC
Scanning 405.000 MHz PLC
Scanning 406.000 MHz PLC
Scanning 407.000 MHz PLC
Scanning 408.000 MHz PLC
Scanning 409.000 MHz PLC
Scanning 410.000 MHz PLC
Scanning 411.000 MHz PLC
Scanning 412.000 MHz PLC
Scanning 413.000 MHz PLC
Scanning 414.000 MHz PLC
Scanning 415.000 MHz PLC
Scanning 416.000 MHz PLC
Scanning 417.000 MHz PLC
Scanning 418.000 MHz PLC
Scanning 419.000 MHz PLC
Scanning 420.000 MHz PLC
Scanning 421.000 MHz PLC
Scanning 422.000 MHz PLC
Scanning 423.000 MHz PLC
Scanning 424.000 MHz PLC
Scanning 425.000 MHz PLC
Scanning 426.000 MHz PLC
Scanning 427.000 MHz PLC
Scanning 428.000 MHz PLC
Scanning 429.000 MHz PLC
Scanning 430.000 MHz PLC
Scanning 431.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 432.000 MHz PLC
Scanning 433.000 MHz PLC
Scanning 434.000 MHz PLC
Scanning 435.000 MHz PLC
Scanning 436.000 MHz PLC
Scanning 437.000 MHz PLC
Scanning 438.000 MHz PLC
Scanning 439.000 MHz PLC
Scanning 440.000 MHz PLC
Scanning 441.000 MHz PLC
Scanning 442.000 MHz PLC
Scanning 443.000 MHz PLC
Scanning 444.000 MHz PLC
Scanning 445.000 MHz PLC
Scanning 446.000 MHz PLC
Scanning 447.000 MHz PLC
Scanning 448.000 MHz PLC
Scanning 449.000 MHz PLC
Scanning 450.000 MHz PLC
Scanning 451.000 MHz PLC
Scanning 452.000 MHz PLC
Scanning 453.000 MHz PLC
Scanning 454.000 MHz PLC
Scanning 455.000 MHz PLC
Scanning 456.000 MHz PLC
Scanning 457.000 MHz PLC
Scanning 458.000 MHz PLC
Scanning 459.000 MHz PLC
Scanning 460.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 461.000 MHz PLC
Scanning 462.000 MHz PLC
Scanning 463.000 MHz PLC
Scanning 464.000 MHz PLC
Scanning 465.000 MHz PLC
Scanning 466.000 MHz PLC
Scanning 467.000 MHz PLC
Scanning 468.000 MHz PLC
Scanning 469.000 MHz PLC
Scanning 470.000 MHz PLC
Scanning 471.000 MHz PLC
Scanning 472.000 MHz PLC
Scanning 473.000 MHz PLC
Scanning 474.000 MHz PLC
Scanning 475.000 MHz PLC
Scanning 476.000 MHz PLC
Scanning 477.000 MHz PLC
Scanning 478.000 MHz PLC
Scanning 479.000 MHz PLC
Scanning 480.000 MHz PLC
Scanning 481.000 MHz PLC
Scanning 482.000 MHz PLC
Scanning 483.000 MHz PLC
Scanning 484.000 MHz PLC
Scanning 485.000 MHz PLC
Scanning 486.000 MHz PLC
Scanning 487.000 MHz PLC
Scanning 488.000 MHz PLC
Scanning 489.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 490.000 MHz PLC
Scanning 491.000 MHz PLC
Scanning 492.000 MHz PLC
Scanning 493.000 MHz PLC
Scanning 494.000 MHz PLC
Scanning 495.000 MHz PLC
Scanning 496.000 MHz PLC
Scanning 497.000 MHz PLC
Scanning 498.000 MHz PLC
Scanning 499.000 MHz PLC
Scanning 500.000 MHz PLC
Scanning 501.000 MHz PLC
Scanning 502.000 MHz PLC
Scanning 503.000 MHz PLC
Scanning 504.000 MHz PLC
Scanning 505.000 MHz PLC
Scanning 506.000 MHz PLC
Scanning 507.000 MHz PLC
Scanning 508.000 MHz PLC
Scanning 509.000 MHz PLC
Scanning 510.000 MHz PLC
Scanning 511.000 MHz PLC
Scanning 512.000 MHz PLC
Scanning 513.000 MHz PLC
Scanning 514.000 MHz PLC
Scanning 515.000 MHz PLC
Scanning 516.000 MHz PLC
Scanning 517.000 MHz PLC
Scanning 518.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 519.000 MHz PLC
Scanning 520.000 MHz PLC
Scanning 521.000 MHz PLC
Scanning 522.000 MHz PLC
Scanning 523.000 MHz PLC
Scanning 524.000 MHz PLC
Scanning 525.000 MHz PLC
Scanning 526.000 MHz PLC
Scanning 527.000 MHz PLC
Scanning 528.000 MHz PLC
Scanning 529.000 MHz PLC
Scanning 530.000 MHz PLC
Scanning 531.000 MHz PLC
Scanning 532.000 MHz PLC
Scanning 533.000 MHz PLC
Scanning 534.000 MHz PLC
Scanning 535.000 MHz PLC
Scanning 536.000 MHz PLC
Scanning 537.000 MHz PLC
Scanning 538.000 MHz PLC
Scanning 539.000 MHz PLC
Scanning 540.000 MHz PLC
Scanning 541.000 MHz PLC
Scanning 542.000 MHz PLC
Scanning 543.000 MHz PLC
Scanning 544.000 MHz PLC
Scanning 545.000 MHz PLC
Scanning 546.000 MHz PLC
Scanning 547.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 548.000 MHz PLC
Scanning 549.000 MHz PLC
Scanning 550.000 MHz PLC
Scanning 551.000 MHz PLC
Scanning 552.000 MHz PLC
Scanning 553.000 MHz PLC
Scanning 554.000 MHz PLC
Scanning 555.000 MHz PLC
Scanning 556.000 MHz PLC
Scanning 557.000 MHz PLC
Scanning 558.000 MHz PLC
Scanning 559.000 MHz PLC
Scanning 560.000 MHz PLC
Scanning 561.000 MHz PLC
Scanning 562.000 MHz PLC
Scanning 563.000 MHz PLC
Scanning 564.000 MHz PLC
Scanning 565.000 MHz PLC
Scanning 566.000 MHz PLC
Scanning 567.000 MHz PLC
Scanning 568.000 MHz PLC
Scanning 569.000 MHz PLC
Scanning 570.000 MHz PLC
Scanning 571.000 MHz PLC
Scanning 572.000 MHz PLC
Scanning 573.000 MHz PLC
Scanning 574.000 MHz PLC
Scanning 575.000 MHz PLC
Scanning 576.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 577.000 MHz PLC
Scanning 578.000 MHz PLC
Scanning 579.000 MHz PLC
Scanning 580.000 MHz PLC
Scanning 581.000 MHz PLC
Scanning 582.000 MHz PLC
Scanning 583.000 MHz PLC
Scanning 584.000 MHz PLC
Scanning 585.000 MHz PLC
Scanning 586.000 MHz PLC
Scanning 587.000 MHz PLC
Scanning 588.000 MHz PLC
Scanning 589.000 MHz PLC
Scanning 590.000 MHz PLC
Scanning 591.000 MHz PLC
Scanning 592.000 MHz PLC
Scanning 593.000 MHz PLC
Scanning 594.000 MHz PLC
Scanning 595.000 MHz PLC
Scanning 596.000 MHz PLC
Scanning 597.000 MHz PLC
Scanning 598.000 MHz PLC
Scanning 599.000 MHz PLC
Scanning 600.000 MHz PLC
Scanning 601.000 MHz PLC
Scanning 602.000 MHz PLC
Scanning 603.000 MHz PLC
Scanning 604.000 MHz PLC
Scanning 605.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 606.000 MHz PLC
Scanning 607.000 MHz PLC
Scanning 608.000 MHz PLC
Scanning 609.000 MHz PLC
Scanning 610.000 MHz PLC
Scanning 611.000 MHz PLC
Scanning 612.000 MHz PLC
Scanning 613.000 MHz PLC
Scanning 614.000 MHz PLC
Scanning 615.000 MHz PLC
Scanning 616.000 MHz PLC
Scanning 617.000 MHz PLC
Scanning 618.000 MHz PLC
Scanning 619.000 MHz PLC
Scanning 620.000 MHz PLC
Scanning 621.000 MHz PLC
Scanning 622.000 MHz PLC
Scanning 623.000 MHz PLC
Scanning 624.000 MHz PLC
Scanning 625.000 MHz PLC
Scanning 626.000 MHz PLC
Scanning 627.000 MHz PLC
Scanning 628.000 MHz PLC
Scanning 629.000 MHz PLC
Scanning 630.000 MHz PLC
Scanning 631.000 MHz PLC
Scanning 632.000 MHz PLC
Scanning 633.000 MHz PLC
Scanning 634.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 635.000 MHz PLC
Scanning 636.000 MHz PLC
Scanning 637.000 MHz PLC
Scanning 638.000 MHz PLC
Scanning 639.000 MHz PLC
Scanning 640.000 MHz PLC
Scanning 641.000 MHz PLC
Scanning 642.000 MHz PLC
Scanning 643.000 MHz PLC
Scanning 644.000 MHz PLC
Scanning 645.000 MHz PLC
Scanning 646.000 MHz PLC
Scanning 647.000 MHz PLC
Scanning 648.000 MHz PLC
Scanning 649.000 MHz PLC
Scanning 650.000 MHz PLC
Scanning 651.000 MHz PLC
Scanning 652.000 MHz PLC
Scanning 653.000 MHz PLC
Scanning 654.000 MHz PLC
Scanning 655.000 MHz PLC
Scanning 656.000 MHz PLC
Scanning 657.000 MHz PLC
Scanning 658.000 MHz PLC
Scanning 659.000 MHz PLC
Scanning 660.000 MHz PLC
Scanning 661.000 MHz PLC
Scanning 662.000 MHz PLC
Scanning 663.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 664.000 MHz PLC
Scanning 665.000 MHz PLC
Scanning 666.000 MHz PLC
Scanning 667.000 MHz PLC
Scanning 668.000 MHz PLC
Scanning 669.000 MHz PLC
Scanning 670.000 MHz PLC
Scanning 671.000 MHz PLC
Scanning 672.000 MHz PLC
Scanning 673.000 MHz PLC
Scanning 674.000 MHz PLC
Scanning 675.000 MHz PLC
Scanning 676.000 MHz PLC
Scanning 677.000 MHz PLC
Scanning 678.000 MHz PLC
Scanning 679.000 MHz PLC
Scanning 680.000 MHz PLC
Scanning 681.000 MHz PLC
Scanning 682.000 MHz PLC
Scanning 683.000 MHz PLC
Scanning 684.000 MHz PLC
Scanning 685.000 MHz PLC
Scanning 686.000 MHz PLC
Scanning 687.000 MHz PLC
Scanning 688.000 MHz PLC
Scanning 689.000 MHz PLC
Scanning 690.000 MHz PLC
Scanning 691.000 MHz PLC
Scanning 692.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 693.000 MHz PLC
Scanning 694.000 MHz PLC
Scanning 695.000 MHz PLC
Scanning 696.000 MHz PLC
Scanning 697.000 MHz PLC
Scanning 698.000 MHz PLC
Scanning 699.000 MHz PLC
Scanning 700.000 MHz PLC
Scanning 701.000 MHz PLC
Scanning 702.000 MHz PLC
Scanning 703.000 MHz PLC
Scanning 704.000 MHz PLC
Scanning 705.000 MHz PLC
Scanning 706.000 MHz PLC
Scanning 707.000 MHz PLC
Scanning 708.000 MHz PLC
Scanning 709.000 MHz PLC
Scanning 710.000 MHz PLC
Scanning 711.000 MHz PLC
Scanning 712.000 MHz PLC
Scanning 713.000 MHz PLC
Scanning 714.000 MHz PLC
Scanning 715.000 MHz PLC
Scanning 716.000 MHz PLC
Scanning 717.000 MHz PLC
Scanning 718.000 MHz PLC
Scanning 719.000 MHz PLC
Scanning 720.000 MHz PLC
Scanning 721.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 722.000 MHz PLC
Scanning 723.000 MHz PLC
Scanning 724.000 MHz PLC
Scanning 725.000 MHz PLC
Scanning 726.000 MHz PLC
Scanning 727.000 MHz PLC
Scanning 728.000 MHz PLC
Scanning 729.000 MHz PLC
Scanning 730.000 MHz PLC
Scanning 731.000 MHz PLC
Scanning 732.000 MHz PLC
Scanning 733.000 MHz PLC
Scanning 734.000 MHz PLC
Scanning 735.000 MHz PLC
Scanning 736.000 MHz PLC
Scanning 737.000 MHz PLC
Scanning 738.000 MHz PLC
Scanning 739.000 MHz PLC
Scanning 740.000 MHz PLC
Scanning 741.000 MHz PLC
Scanning 742.000 MHz PLC
Scanning 743.000 MHz PLC
Scanning 744.000 MHz PLC
Scanning 745.000 MHz PLC
Scanning 746.000 MHz PLC
Scanning 747.000 MHz PLC
Scanning 748.000 MHz PLC
Scanning 749.000 MHz PLC
Scanning 750.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 751.000 MHz PLC
Scanning 752.000 MHz PLC
Scanning 753.000 MHz PLC
Scanning 754.000 MHz PLC
Scanning 755.000 MHz PLC
Scanning 756.000 MHz PLC
Scanning 757.000 MHz PLC
Scanning 758.000 MHz PLC
Scanning 759.000 MHz PLC
Scanning 760.000 MHz PLC
Scanning 761.000 MHz PLC
Scanning 762.000 MHz PLC
Scanning 763.000 MHz PLC
Scanning 764.000 MHz PLC
Scanning 765.000 MHz PLC
Scanning 766.000 MHz PLC
Scanning 767.000 MHz PLC
Scanning 768.000 MHz PLC
Scanning 769.000 MHz PLC
Scanning 770.000 MHz PLC
Scanning 771.000 MHz PLC
Scanning 772.000 MHz PLC
Scanning 773.000 MHz PLC
Scanning 774.000 MHz PLC
Scanning 775.000 MHz PLC
Scanning 776.000 MHz PLC
Scanning 777.000 MHz PLC
Scanning 778.000 MHz PLC
Scanning 779.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 780.000 MHz PLC
Scanning 781.000 MHz PLC
Scanning 782.000 MHz PLC
Scanning 783.000 MHz PLC
Scanning 784.000 MHz PLC
Scanning 785.000 MHz PLC
Scanning 786.000 MHz PLC
Scanning 787.000 MHz PLC
Scanning 788.000 MHz PLC
Scanning 789.000 MHz PLC
Scanning 790.000 MHz PLC
Scanning 791.000 MHz PLC
Scanning 792.000 MHz PLC
Scanning 793.000 MHz PLC
Scanning 794.000 MHz PLC
Scanning 795.000 MHz PLC
Scanning 796.000 MHz PLC
Scanning 797.000 MHz PLC
Scanning 798.000 MHz PLC
Scanning 799.000 MHz PLC
Scanning 800.000 MHz PLC
Scanning 801.000 MHz PLC
Scanning 802.000 MHz PLC
Scanning 803.000 MHz PLC
Scanning 804.000 MHz PLC
Scanning 805.000 MHz PLC
Scanning 806.000 MHz PLC
Scanning 807.000 MHz PLC
Scanning 808.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 809.000 MHz PLC
Scanning 810.000 MHz PLC
Scanning 811.000 MHz PLC
Scanning 812.000 MHz PLC
Scanning 813.000 MHz PLC
Scanning 814.000 MHz PLC
Scanning 815.000 MHz PLC
Scanning 816.000 MHz PLC
Scanning 817.000 MHz PLC
Scanning 818.000 MHz PLC
Scanning 819.000 MHz PLC
Scanning 820.000 MHz PLC
Scanning 821.000 MHz PLC
Scanning 822.000 MHz PLC
Scanning 823.000 MHz PLC
Scanning 824.000 MHz PLC
Scanning 825.000 MHz PLC
Scanning 826.000 MHz PLC
Scanning 827.000 MHz PLC
Scanning 828.000 MHz PLC
Scanning 829.000 MHz PLC
Scanning 830.000 MHz PLC
Scanning 831.000 MHz PLC
Scanning 832.000 MHz PLC
Scanning 833.000 MHz PLC
Scanning 834.000 MHz PLC
Scanning 835.000 MHz PLC
Scanning 836.000 MHz PLC
Scanning 837.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 838.000 MHz PLC
Scanning 839.000 MHz PLC
Scanning 840.000 MHz PLC
Scanning 841.000 MHz PLC
Scanning 842.000 MHz PLC
Scanning 843.000 MHz PLC
Scanning 844.000 MHz PLC
Scanning 845.000 MHz PLC
Scanning 846.000 MHz PLC
Scanning 847.000 MHz PLC
Scanning 848.000 MHz PLC
Scanning 849.000 MHz PLC
Scanning 850.000 MHz PLC
Scanning 851.000 MHz PLC
Scanning 852.000 MHz PLC
Scanning 853.000 MHz PLC
Scanning 854.000 MHz PLC
Scanning 855.000 MHz PLC
Scanning 856.000 MHz PLC
Scanning 857.000 MHz PLC
Scanning 858.000 MHz PLC
Scanning 859.000 MHz PLC
Scanning 860.000 MHz PLC
Scanning 861.000 MHz PLC
Scanning 862.000 MHz PLC
Scanning 863.000 MHz PLC
Scanning 864.000 MHz PLC
Scanning 865.000 MHz PLC
Scanning 866.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 867.000 MHz PLC
Scanning 868.000 MHz PLC
Scanning 869.000 MHz PLC
Scanning 870.000 MHz PLC
Scanning 871.000 MHz PLC
Scanning 872.000 MHz PLC
Scanning 873.000 MHz PLC
Scanning 874.000 MHz PLC
Scanning 875.000 MHz PLC
Scanning 876.000 MHz PLC
Scanning 877.000 MHz PLC
Scanning 878.000 MHz PLC
Scanning 879.000 MHz PLC
Scanning 880.000 MHz PLC
Scanning 881.000 MHz PLC
Scanning 882.000 MHz PLC
Scanning 883.000 MHz PLC
Scanning 884.000 MHz PLC
Scanning 885.000 MHz PLC
Scanning 886.000 MHz PLC
Scanning 887.000 MHz PLC
Scanning 888.000 MHz PLC
Scanning 889.000 MHz PLC
Scanning 890.000 MHz PLC
Scanning 891.000 MHz PLC
Scanning 892.000 MHz PLC
Scanning 893.000 MHz PLC
Scanning 894.000 MHz PLC
Scanning 895.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 896.000 MHz PLC
Scanning 897.000 MHz purged
Scanning 898.000 MHz PLC
Scanning 899.000 MHz PLC
Scanning 900.000 MHz PLC
Scanning 901.000 MHz PLC
Scanning 902.000 MHz PLC
Scanning 903.000 MHz PLC
Scanning 904.000 MHz PLC
Scanning 905.000 MHz PLC
Scanning 906.000 MHz PLC
Scanning 907.000 MHz PLC
Scanning 908.000 MHz PLC
Scanning 909.000 MHz PLC
Scanning 910.000 MHz PLC
Scanning 911.000 MHz PLC
Scanning 912.000 MHz PLC
Scanning 913.000 MHz PLC
Scanning 914.000 MHz PLC
Scanning 915.000 MHz PLC
Scanning 916.000 MHz PLC
Scanning 917.000 MHz PLC
Scanning 918.000 MHz PLC
Scanning 919.000 MHz PLC
Scanning 920.000 MHz PLC
Scanning 921.000 MHz PLC
Scanning 922.000 MHz PLC
Scanning 923.000 MHz PLC
Scanning 924.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 925.000 MHz PLC
Scanning 926.000 MHz PLC
Scanning 927.000 MHz PLC
Scanning 928.000 MHz PLC
Scanning 929.000 MHz PLC
Scanning 930.000 MHz PLC
Scanning 931.000 MHz PLC
Scanning 932.000 MHz PLC
Scanning 933.000 MHz PLC
Scanning 934.000 MHz PLC
Scanning 935.000 MHz PLC
Scanning 936.000 MHz PLC
Scanning 937.000 MHz PLC
Scanning 938.000 MHz PLC
Scanning 939.000 MHz PLC
Scanning 940.000 MHz PLC
Scanning 941.000 MHz PLC
Scanning 942.000 MHz PLC
Scanning 943.000 MHz PLC
Scanning 944.000 MHz PLC
Scanning 945.000 MHz PLC
Scanning 946.000 MHz PLC
Scanning 947.000 MHz PLC
Scanning 948.000 MHz PLC
Scanning 949.000 MHz PLC
Scanning 950.000 MHz PLC
Scanning 951.000 MHz PLC
Scanning 952.000 MHz PLC
Scanning 953.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 954.000 MHz PLC
Scanning 955.000 MHz PLC
Scanning 956.000 MHz PLC
Scanning 957.000 MHz PLC
Scanning 958.000 MHz PLC
Scanning 959.000 MHz PLC
Scanning 960.000 MHz PLC
Scanning 961.000 MHz PLC
Scanning 962.000 MHz PLC
Scanning 963.000 MHz PLC
Scanning 964.000 MHz PLC
Scanning 965.000 MHz PLC
Scanning 966.000 MHz PLC
Scanning 967.000 MHz PLC
Scanning 968.000 MHz PLC
Scanning 969.000 MHz PLC
Scanning 970.000 MHz PLC
Scanning 971.000 MHz PLC
Scanning 972.000 MHz PLC
Scanning 973.000 MHz PLC
Scanning 974.000 MHz PLC
Scanning 975.000 MHz PLC
Scanning 976.000 MHz PLC
Scanning 977.000 MHz PLC
Scanning 978.000 MHz PLC
Scanning 979.000 MHz PLC
Scanning 980.000 MHz PLC
Scanning 981.000 MHz PLC
Scanning 982.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 983.000 MHz PLC
Scanning 984.000 MHz PLC
Scanning 985.000 MHz PLC
Scanning 986.000 MHz PLC
Scanning 987.000 MHz PLC
Scanning 988.000 MHz PLC
Scanning 989.000 MHz PLC
Scanning 990.000 MHz PLC
Scanning 991.000 MHz PLC
Scanning 992.000 MHz PLC
Scanning 993.000 MHz PLC
Scanning 994.000 MHz PLC
Scanning 995.000 MHz PLC
Scanning 996.000 MHz PLC
Scanning 997.000 MHz PLC
Scanning 998.000 MHz PLC
Scanning 999.000 MHz PLC
Scanning 1000.000 MHz PLC
Scanning 1001.000 MHz PLC
Scanning 1002.000 MHz PLC
Scanning 1003.000 MHz PLC
Scanning 1004.000 MHz PLC
Scanning 1005.000 MHz PLC
Scanning 1006.000 MHz PLC
Scanning 1007.000 MHz PLC
Scanning 1008.000 MHz PLC
Scanning 1009.000 MHz PLC
Scanning 1010.000 MHz PLC
Scanning 1011.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 1012.000 MHz PLC
Scanning 1013.000 MHz PLC
Scanning 1014.000 MHz PLC
Scanning 1015.000 MHz PLC
Scanning 1016.000 MHz PLC
Scanning 1017.000 MHz PLC
Scanning 1018.000 MHz PLC
Scanning 1019.000 MHz PLC
Scanning 1020.000 MHz PLC
Scanning 1021.000 MHz PLC
Scanning 1022.000 MHz PLC
Scanning 1023.000 MHz PLC
Scanning 1024.000 MHz PLC
Scanning 1025.000 MHz PLC
Scanning 1026.000 MHz PLC
Scanning 1027.000 MHz PLC
Scanning 1028.000 MHz PLC
Scanning 1029.000 MHz PLC
Scanning 1030.000 MHz PLC
Scanning 1031.000 MHz PLC
Scanning 1032.000 MHz PLC
Scanning 1033.000 MHz PLC
Scanning 1034.000 MHz PLC
Scanning 1035.000 MHz PLC
Scanning 1036.000 MHz PLC
Scanning 1037.000 MHz PLC
Scanning 1038.000 MHz PLC
Scanning 1039.000 MHz PLC
Scanning 1040.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 1041.000 MHz PLC
Scanning 1042.000 MHz PLC
Scanning 1043.000 MHz PLC
Scanning 1044.000 MHz PLC
Scanning 1045.000 MHz PLC
Scanning 1046.000 MHz PLC
Scanning 1047.000 MHz PLC
Scanning 1048.000 MHz PLC
Scanning 1049.000 MHz PLC
Scanning 1050.000 MHz PLC
Scanning 1051.000 MHz PLC
Scanning 1052.000 MHz PLC
Scanning 1053.000 MHz PLC
Scanning 1054.000 MHz PLC
Scanning 1055.000 MHz PLC
Scanning 1056.000 MHz PLC
Scanning 1057.000 MHz PLC
Scanning 1058.000 MHz PLC
Scanning 1059.000 MHz PLC
Scanning 1060.000 MHz PLC
Scanning 1061.000 MHz PLC
Scanning 1062.000 MHz PLC
Scanning 1063.000 MHz PLC
Scanning 1064.000 MHz PLC
Scanning 1065.000 MHz PLC
Scanning 1066.000 MHz PLC
Scanning 1067.000 MHz PLC
Scanning 1068.000 MHz PLC
Scanning 1069.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 1070.000 MHz PLC
Scanning 1071.000 MHz PLC
Scanning 1072.000 MHz PLC
Scanning 1073.000 MHz PLC
Scanning 1074.000 MHz PLC
Scanning 1075.000 MHz PLC
Scanning 1076.000 MHz PLC
Scanning 1077.000 MHz PLC
Scanning 1078.000 MHz PLC
Scanning 1079.000 MHz PLC
Scanning 1080.000 MHz PLC
Scanning 1081.000 MHz PLC
Scanning 1082.000 MHz PLC
Scanning 1083.000 MHz PLC
Scanning 1084.000 MHz PLC
Scanning 1085.000 MHz PLC
Scanning 1086.000 MHz PLC
Scanning 1087.000 MHz PLC
Scanning 1088.000 MHz PLC
Scanning 1089.000 MHz PLC
Scanning 1090.000 MHz PLC
Scanning 1091.000 MHz PLC
Scanning 1092.000 MHz PLC
Scanning 1093.000 MHz PLC
Scanning 1094.000 MHz PLC
Scanning 1095.000 MHz PLC
Scanning 1096.000 MHz PLC
Scanning 1097.000 MHz PLC
Scanning 1098.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 1099.000 MHz PLC
Scanning 1100.000 MHz PLC
Scanning 1101.000 MHz PLC
Scanning 1102.000 MHz PLC
Scanning 1103.000 MHz PLC
Scanning 1104.000 MHz PLC
Scanning 1105.000 MHz PLC
Scanning 1106.000 MHz PLC
Scanning 1107.000 MHz PLC
Scanning 1108.000 MHz PLC
Scanning 1109.000 MHz PLC
Scanning 1110.000 MHz PLC
Scanning 1111.000 MHz PLC
Scanning 1112.000 MHz PLC
Scanning 1113.000 MHz PLC
Scanning 1114.000 MHz PLC
Scanning 1115.000 MHz PLC
Scanning 1116.000 MHz PLC
Scanning 1117.000 MHz PLC
Scanning 1118.000 MHz PLC
Scanning 1119.000 MHz PLC
Scanning 1120.000 MHz PLC
Scanning 1121.000 MHz PLC
Scanning 1122.000 MHz PLC
Scanning 1123.000 MHz PLC
Scanning 1124.000 MHz PLC
Scanning 1125.000 MHz PLC
Scanning 1126.000 MHz PLC
Scanning 1127.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 1128.000 MHz PLC
Scanning 1129.000 MHz PLC
Scanning 1130.000 MHz PLC
Scanning 1131.000 MHz PLC
Scanning 1132.000 MHz PLC
Scanning 1133.000 MHz PLC
Scanning 1134.000 MHz PLC
Scanning 1135.000 MHz PLC
Scanning 1136.000 MHz PLC
Scanning 1137.000 MHz PLC
Scanning 1138.000 MHz PLC
Scanning 1139.000 MHz PLC
Scanning 1140.000 MHz PLC
Scanning 1141.000 MHz PLC
Scanning 1142.000 MHz PLC
Scanning 1143.000 MHz PLC
Scanning 1144.000 MHz PLC
Scanning 1145.000 MHz PLC
Scanning 1146.000 MHz PLC
Scanning 1147.000 MHz PLC
Scanning 1148.000 MHz PLC
Scanning 1149.000 MHz PLC
Scanning 1150.000 MHz PLC
Scanning 1151.000 MHz PLC
Scanning 1152.000 MHz PLC
Scanning 1153.000 MHz PLC
Scanning 1154.000 MHz PLC
Scanning 1155.000 MHz PLC
Scanning 1156.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 1157.000 MHz PLC
Scanning 1158.000 MHz PLC
Scanning 1159.000 MHz PLC
Scanning 1160.000 MHz PLC
Scanning 1161.000 MHz PLC
Scanning 1162.000 MHz PLC
Scanning 1163.000 MHz PLC
Scanning 1164.000 MHz PLC
Scanning 1165.000 MHz PLC
Scanning 1166.000 MHz PLC
Scanning 1167.000 MHz PLC
Scanning 1168.000 MHz PLC
Scanning 1169.000 MHz PLC
Scanning 1170.000 MHz PLC
Scanning 1171.000 MHz PLC
Scanning 1172.000 MHz PLC
Scanning 1173.000 MHz PLC
Scanning 1174.000 MHz PLC
Scanning 1175.000 MHz PLC
Scanning 1176.000 MHz PLC
Scanning 1177.000 MHz PLC
Scanning 1178.000 MHz PLC
Scanning 1179.000 MHz PLC
Scanning 1180.000 MHz PLC
Scanning 1181.000 MHz PLC
Scanning 1182.000 MHz PLC
Scanning 1183.000 MHz PLC
Scanning 1184.000 MHz PLC
Scanning 1185.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 1186.000 MHz PLC
Scanning 1187.000 MHz PLC
Scanning 1188.000 MHz PLC
Scanning 1189.000 MHz PLC
Scanning 1190.000 MHz PLC
Scanning 1191.000 MHz PLC
Scanning 1192.000 MHz PLC
Scanning 1193.000 MHz PLC
Scanning 1194.000 MHz PLC
Scanning 1195.000 MHz PLC
Scanning 1196.000 MHz PLC
Scanning 1197.000 MHz PLC
Scanning 1198.000 MHz PLC
Scanning 1199.000 MHz PLC
Scanning 1200.000 MHz PLC
Scanning 1201.000 MHz PLC
Scanning 1202.000 MHz PLC
Scanning 1203.000 MHz PLC
Scanning 1204.000 MHz PLC
Scanning 1205.000 MHz PLC
Scanning 1206.000 MHz PLC
Scanning 1207.000 MHz PLC
Scanning 1208.000 MHz PLC
Scanning 1209.000 MHz PLC
Scanning 1210.000 MHz PLC
Scanning 1211.000 MHz PLC
Scanning 1212.000 MHz PLC
Scanning 1213.000 MHz PLC
Scanning 1214.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 1215.000 MHz PLC
Scanning 1216.000 MHz PLC
Scanning 1217.000 MHz PLC
Scanning 1218.000 MHz PLC
Scanning 999.000 MHz SC-QAM (Annex B(STD))
Scanning 993.000 MHz SC-QAM (Annex B(STD))
Scanning 987.000 MHz SC-QAM (Annex B(STD))
Scanning 981.000 MHz SC-QAM (Annex B(STD))
Scanning 975.000 MHz SC-QAM (Annex B(STD))
Scanning 969.000 MHz SC-QAM (Annex B(STD))
Scanning 963.000 MHz SC-QAM (Annex B(STD))
Scanning 957.000 MHz SC-QAM (Annex B(STD))
Scanning 951.000 MHz SC-QAM (Annex B(STD))
Scanning 945.000 MHz SC-QAM (Annex B(STD))
Scanning 939.000 MHz SC-QAM (Annex B(STD))
Scanning 933.000 MHz SC-QAM (Annex B(STD))
Scanning 927.000 MHz SC-QAM (Annex B(STD))
Scanning 921.000 MHz SC-QAM (Annex B(STD))
Scanning 915.000 MHz SC-QAM (Annex B(STD))
Scanning 909.000 MHz SC-QAM (Annex B(STD))
Scanning 903.000 MHz SC-QAM (Annex B(STD))
Scanning 897.000 MHz purged (Annex B(STD))
Scanning 891.000 MHz SC-QAM (Annex B(STD))
Scanning 885.000 MHz SC-QAM (Annex B(STD))
Scanning 879.000 MHz SC-QAM (Annex B(STD))
Scanning 873.000 MHz SC-QAM (Annex B(STD))
Scanning 867.000 MHz SC-QAM (Annex B(STD))
Scanning 861.000 MHz SC-QAM (Annex B(STD))
Scanning 855.000 MHz SC-QAM (Annex B(STD))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 849.000 MHz SC-QAM (Annex B(STD))
Scanning 843.000 MHz SC-QAM (Annex B(STD))
Scanning 837.000 MHz SC-QAM (Annex B(STD))
Scanning 831.000 MHz SC-QAM (Annex B(STD))
Scanning 825.000 MHz SC-QAM (Annex B(STD))
Scanning 819.000 MHz SC-QAM (Annex B(STD))
Scanning 813.000 MHz SC-QAM (Annex B(STD))
Scanning 807.000 MHz SC-QAM (Annex B(STD))
Scanning 801.000 MHz SC-QAM (Annex B(STD))
Scanning 795.000 MHz SC-QAM (Annex B(STD))
Scanning 789.000 MHz SC-QAM (Annex B(STD))
Scanning 783.000 MHz SC-QAM (Annex B(STD))
Scanning 777.000 MHz SC-QAM (Annex B(STD))
Scanning 771.000 MHz SC-QAM (Annex B(STD))
Scanning 765.000 MHz SC-QAM (Annex B(STD))
Scanning 759.000 MHz SC-QAM (Annex B(STD))
Scanning 753.000 MHz SC-QAM (Annex B(STD))
Scanning 747.000 MHz SC-QAM (Annex B(STD))
Scanning 741.000 MHz SC-QAM (Annex B(STD))
Scanning 735.000 MHz SC-QAM (Annex B(STD))
Scanning 729.000 MHz SC-QAM (Annex B(STD))
Scanning 723.000 MHz SC-QAM (Annex B(STD))
Scanning 717.000 MHz SC-QAM (Annex B(STD))
Scanning 711.000 MHz SC-QAM (Annex B(STD))
Scanning 705.000 MHz SC-QAM (Annex B(STD))
Scanning 699.000 MHz SC-QAM (Annex B(STD))
Scanning 693.000 MHz SC-QAM (Annex B(STD))
Scanning 687.000 MHz SC-QAM (Annex B(STD))
Scanning 681.000 MHz SC-QAM (Annex B(STD))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 675.000 MHz SC-QAM (Annex B(STD))
Scanning 669.000 MHz SC-QAM (Annex B(STD))
Scanning 663.000 MHz SC-QAM (Annex B(STD))
Scanning 657.000 MHz SC-QAM (Annex B(STD))
Scanning 651.000 MHz SC-QAM (Annex B(STD))
Scanning 645.000 MHz SC-QAM (Annex B(STD))
Scanning 639.000 MHz SC-QAM (Annex B(STD))
Scanning 633.000 MHz SC-QAM (Annex B(STD))
Scanning 627.000 MHz SC-QAM (Annex B(STD))
Scanning 621.000 MHz SC-QAM (Annex B(STD))
Scanning 615.000 MHz SC-QAM (Annex B(STD))
Scanning 609.000 MHz SC-QAM (Annex B(STD))
Scanning 603.000 MHz SC-QAM (Annex B(STD))
Scanning 597.000 MHz SC-QAM (Annex B(STD))
Scanning 591.000 MHz SC-QAM (Annex B(STD))
Scanning 585.000 MHz SC-QAM (Annex B(STD))
Scanning 579.000 MHz SC-QAM (Annex B(STD))
Scanning 573.000 MHz SC-QAM (Annex B(STD))
Scanning 567.000 MHz SC-QAM (Annex B(STD))
Scanning 561.000 MHz SC-QAM (Annex B(STD))
Scanning 555.000 MHz SC-QAM (Annex B(STD))
Scanning 549.000 MHz SC-QAM (Annex B(STD))
Scanning 543.000 MHz SC-QAM (Annex B(STD))
Scanning 537.000 MHz SC-QAM (Annex B(STD))
Scanning 531.000 MHz SC-QAM (Annex B(STD))
Scanning 525.000 MHz SC-QAM (Annex B(STD))
Scanning 519.000 MHz SC-QAM (Annex B(STD))
Scanning 513.000 MHz SC-QAM (Annex B(STD))
Scanning 507.000 MHz SC-QAM (Annex B(STD))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 501.000 MHz SC-QAM (Annex B(STD))
Scanning 495.000 MHz SC-QAM (Annex B(STD))
Scanning 489.000 MHz SC-QAM (Annex B(STD))
Scanning 483.000 MHz SC-QAM (Annex B(STD))
Scanning 477.000 MHz SC-QAM (Annex B(STD))
Scanning 471.000 MHz SC-QAM (Annex B(STD))
Scanning 465.000 MHz SC-QAM (Annex B(STD))
Scanning 459.000 MHz SC-QAM (Annex B(STD))
Scanning 453.000 MHz SC-QAM (Annex B(STD))
Scanning 447.000 MHz SC-QAM (Annex B(STD))
Scanning 441.000 MHz SC-QAM (Annex B(STD))
Scanning 435.000 MHz SC-QAM (Annex B(STD))
Scanning 429.000 MHz SC-QAM (Annex B(STD))
Scanning 423.000 MHz SC-QAM (Annex B(STD))
Scanning 417.000 MHz SC-QAM (Annex B(STD))
Scanning 411.000 MHz SC-QAM (Annex B(STD))
Scanning 405.000 MHz SC-QAM (Annex B(STD))
Scanning 399.000 MHz SC-QAM (Annex B(STD))
Scanning 393.000 MHz SC-QAM (Annex B(STD))
Scanning 387.000 MHz SC-QAM (Annex B(STD))
Scanning 381.000 MHz SC-QAM (Annex B(STD))
Scanning 375.000 MHz SC-QAM (Annex B(STD))
Scanning 369.000 MHz SC-QAM (Annex B(STD))
Scanning 363.000 MHz SC-QAM (Annex B(STD))
Scanning 357.000 MHz SC-QAM (Annex B(STD))
Scanning 351.000 MHz SC-QAM (Annex B(STD))
Scanning 345.000 MHz SC-QAM (Annex B(STD))
Scanning 339.000 MHz SC-QAM (Annex B(STD))
Scanning 333.000 MHz SC-QAM (Annex B(STD))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 327.000 MHz SC-QAM (Annex B(STD))
Scanning 321.000 MHz SC-QAM (Annex B(STD))
Scanning 315.000 MHz SC-QAM (Annex B(STD))
Scanning 309.000 MHz SC-QAM (Annex B(STD))
Scanning 303.000 MHz SC-QAM (Annex B(STD))
Scanning 297.000 MHz SC-QAM (Annex B(STD))
Scanning 291.000 MHz SC-QAM (Annex B(STD))
Scanning 285.000 MHz SC-QAM (Annex B(STD))
Scanning 279.000 MHz SC-QAM (Annex B(STD))
Scanning 273.000 MHz SC-QAM (Annex B(STD))
Scanning 267.000 MHz SC-QAM (Annex B(STD))
Scanning 261.000 MHz SC-QAM (Annex B(STD))
Scanning 997.750 MHz SC-QAM (Annex B(HRC))
Scanning 991.750 MHz SC-QAM (Annex B(HRC))
Scanning 985.750 MHz SC-QAM (Annex B(HRC))
Scanning 979.750 MHz SC-QAM (Annex B(HRC))
Scanning 973.750 MHz SC-QAM (Annex B(HRC))
Scanning 967.750 MHz SC-QAM (Annex B(HRC))
Scanning 961.750 MHz SC-QAM (Annex B(HRC))
Scanning 955.750 MHz SC-QAM (Annex B(HRC))
Scanning 949.750 MHz SC-QAM (Annex B(HRC))
Scanning 943.750 MHz SC-QAM (Annex B(HRC))
Scanning 937.750 MHz SC-QAM (Annex B(HRC))
Scanning 931.750 MHz SC-QAM (Annex B(HRC))
Scanning 925.750 MHz SC-QAM (Annex B(HRC))
Scanning 919.750 MHz SC-QAM (Annex B(HRC))
Scanning 913.750 MHz SC-QAM (Annex B(HRC))
Scanning 907.750 MHz SC-QAM (Annex B(HRC))
Scanning 901.750 MHz SC-QAM (Annex B(HRC))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 895.750 MHz SC-QAM (Annex B(HRC))
Scanning 889.750 MHz SC-QAM (Annex B(HRC))
Scanning 883.750 MHz SC-QAM (Annex B(HRC))
Scanning 877.750 MHz SC-QAM (Annex B(HRC))
Scanning 871.750 MHz SC-QAM (Annex B(HRC))
Scanning 865.750 MHz SC-QAM (Annex B(HRC))
Scanning 859.750 MHz SC-QAM (Annex B(HRC))
Scanning 853.750 MHz SC-QAM (Annex B(HRC))
Scanning 847.750 MHz SC-QAM (Annex B(HRC))
Scanning 841.750 MHz SC-QAM (Annex B(HRC))
Scanning 835.750 MHz SC-QAM (Annex B(HRC))
Scanning 829.750 MHz SC-QAM (Annex B(HRC))
Scanning 823.750 MHz SC-QAM (Annex B(HRC))
Scanning 817.750 MHz SC-QAM (Annex B(HRC))
Scanning 811.750 MHz SC-QAM (Annex B(HRC))
Scanning 805.750 MHz SC-QAM (Annex B(HRC))
Scanning 799.750 MHz SC-QAM (Annex B(HRC))
Scanning 793.750 MHz SC-QAM (Annex B(HRC))
Scanning 787.750 MHz SC-QAM (Annex B(HRC))
Scanning 781.750 MHz SC-QAM (Annex B(HRC))
Scanning 775.750 MHz SC-QAM (Annex B(HRC))
Scanning 769.750 MHz SC-QAM (Annex B(HRC))
Scanning 763.750 MHz SC-QAM (Annex B(HRC))
Scanning 757.750 MHz SC-QAM (Annex B(HRC))
Scanning 751.750 MHz SC-QAM (Annex B(HRC))
Scanning 745.750 MHz SC-QAM (Annex B(HRC))
Scanning 739.750 MHz SC-QAM (Annex B(HRC))
Scanning 733.750 MHz SC-QAM (Annex B(HRC))
Scanning 727.750 MHz SC-QAM (Annex B(HRC))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 721.750 MHz SC-QAM (Annex B(HRC))
Scanning 715.750 MHz SC-QAM (Annex B(HRC))
Scanning 709.750 MHz SC-QAM (Annex B(HRC))
Scanning 703.750 MHz SC-QAM (Annex B(HRC))
Scanning 697.750 MHz SC-QAM (Annex B(HRC))
Scanning 691.750 MHz SC-QAM (Annex B(HRC))
Scanning 685.750 MHz SC-QAM (Annex B(HRC))
Scanning 679.750 MHz SC-QAM (Annex B(HRC))
Scanning 673.750 MHz SC-QAM (Annex B(HRC))
Scanning 667.750 MHz SC-QAM (Annex B(HRC))
Scanning 661.750 MHz SC-QAM (Annex B(HRC))
Scanning 655.750 MHz SC-QAM (Annex B(HRC))
Scanning 649.750 MHz SC-QAM (Annex B(HRC))
Scanning 643.750 MHz SC-QAM (Annex B(HRC))
Scanning 637.750 MHz SC-QAM (Annex B(HRC))
Scanning 631.750 MHz SC-QAM (Annex B(HRC))
Scanning 625.750 MHz SC-QAM (Annex B(HRC))
Scanning 619.750 MHz SC-QAM (Annex B(HRC))
Scanning 613.750 MHz SC-QAM (Annex B(HRC))
Scanning 607.750 MHz SC-QAM (Annex B(HRC))
Scanning 601.750 MHz SC-QAM (Annex B(HRC))
Scanning 595.750 MHz SC-QAM (Annex B(HRC))
Scanning 589.750 MHz SC-QAM (Annex B(HRC))
Scanning 583.750 MHz SC-QAM (Annex B(HRC))
Scanning 577.750 MHz SC-QAM (Annex B(HRC))
Scanning 571.750 MHz SC-QAM (Annex B(HRC))
Scanning 565.750 MHz SC-QAM (Annex B(HRC))
Scanning 559.750 MHz SC-QAM (Annex B(HRC))
Scanning 553.750 MHz SC-QAM (Annex B(HRC))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 547.750 MHz SC-QAM (Annex B(HRC))
Scanning 541.750 MHz SC-QAM (Annex B(HRC))
Scanning 535.750 MHz SC-QAM (Annex B(HRC))
Scanning 529.750 MHz SC-QAM (Annex B(HRC))
Scanning 523.750 MHz SC-QAM (Annex B(HRC))
Scanning 517.750 MHz SC-QAM (Annex B(HRC))
Scanning 511.750 MHz SC-QAM (Annex B(HRC))
Scanning 505.750 MHz SC-QAM (Annex B(HRC))
Scanning 499.750 MHz SC-QAM (Annex B(HRC))
Scanning 493.750 MHz SC-QAM (Annex B(HRC))
Scanning 487.750 MHz SC-QAM (Annex B(HRC))
Scanning 481.750 MHz SC-QAM (Annex B(HRC))
Scanning 475.750 MHz SC-QAM (Annex B(HRC))
Scanning 469.750 MHz SC-QAM (Annex B(HRC))
Scanning 463.750 MHz SC-QAM (Annex B(HRC))
Scanning 457.750 MHz SC-QAM (Annex B(HRC))
Scanning 451.750 MHz SC-QAM (Annex B(HRC))
Scanning 445.750 MHz SC-QAM (Annex B(HRC))
Scanning 439.750 MHz SC-QAM (Annex B(HRC))
Scanning 433.750 MHz SC-QAM (Annex B(HRC))
Scanning 427.750 MHz SC-QAM (Annex B(HRC))
Scanning 421.750 MHz SC-QAM (Annex B(HRC))
Scanning 415.750 MHz SC-QAM (Annex B(HRC))
Scanning 409.750 MHz SC-QAM (Annex B(HRC))
Scanning 403.750 MHz SC-QAM (Annex B(HRC))
Scanning 397.750 MHz SC-QAM (Annex B(HRC))
Scanning 391.750 MHz SC-QAM (Annex B(HRC))
Scanning 385.750 MHz SC-QAM (Annex B(HRC))
Scanning 379.750 MHz SC-QAM (Annex B(HRC))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 373.750 MHz SC-QAM (Annex B(HRC))
Scanning 367.750 MHz SC-QAM (Annex B(HRC))
Scanning 361.750 MHz SC-QAM (Annex B(HRC))
Scanning 355.750 MHz SC-QAM (Annex B(HRC))
Scanning 349.750 MHz SC-QAM (Annex B(HRC))
Scanning 343.750 MHz SC-QAM (Annex B(HRC))
Scanning 337.750 MHz SC-QAM (Annex B(HRC))
Scanning 331.750 MHz SC-QAM (Annex B(HRC))
Scanning 325.750 MHz SC-QAM (Annex B(HRC))
Scanning 319.750 MHz SC-QAM (Annex B(HRC))
Scanning 313.750 MHz SC-QAM (Annex B(HRC))
Scanning 307.750 MHz SC-QAM (Annex B(HRC))
Scanning 301.750 MHz SC-QAM (Annex B(HRC))
Scanning 295.750 MHz SC-QAM (Annex B(HRC))
Scanning 289.750 MHz SC-QAM (Annex B(HRC))
Scanning 283.750 MHz SC-QAM (Annex B(HRC))
Scanning 277.750 MHz SC-QAM (Annex B(HRC))
Scanning 271.750 MHz SC-QAM (Annex B(HRC))
Scanning 265.750 MHz SC-QAM (Annex B(HRC))
Scanning 259.750 MHz SC-QAM (Annex B(HRC))
Scanning 400.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 408.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 416.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 424.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 432.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 440.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 448.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 456.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 464.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 472.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 480.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 488.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 496.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 504.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 512.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 520.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 528.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 536.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 544.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 552.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 560.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 568.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 576.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 584.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 592.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 600.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 608.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 616.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 624.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 632.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 640.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 648.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 656.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 664.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 672.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 680.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 688.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 696.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 704.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 712.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 720.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 728.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 736.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 744.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 752.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 760.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 768.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 776.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 784.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 792.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 800.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 808.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 816.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 824.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 832.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 840.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 848.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 856.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 864.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 872.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 880.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 888.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 896.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 904.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 912.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 920.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 928.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 936.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 944.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 952.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 960.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 968.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 976.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 984.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 992.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 392.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 384.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 376.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 368.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 360.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 352.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 344.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 336.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 328.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 320.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 312.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 304.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 296.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 288.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 280.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 272.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 264.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 258.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 259.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 260.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 261.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 262.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 263.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 264.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 265.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 266.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 267.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 268.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 269.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 270.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 271.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 272.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 273.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 274.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 275.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 276.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 277.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 278.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 279.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 280.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 281.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 282.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 283.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 284.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 285.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 286.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 287.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 288.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 289.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 290.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 291.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 292.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 293.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 294.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 295.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 296.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 297.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 298.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 299.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 300.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 301.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 302.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 303.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 304.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 305.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 306.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 307.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 308.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 309.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 310.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 311.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 312.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 313.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 314.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 315.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 316.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 317.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 318.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 319.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 320.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 321.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 322.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 323.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 324.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 325.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 326.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 327.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 328.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 329.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 330.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 331.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 332.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 333.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 334.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 335.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 336.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 337.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 338.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 339.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 340.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 341.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 342.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 343.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 344.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 345.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 346.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 347.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 348.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 349.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 350.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 351.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 352.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 353.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 354.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 355.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 356.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 357.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 358.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 359.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 360.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 361.000 MHz purged (Annex A(Eu.1M))
Scanning 362.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 363.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 364.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 365.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 366.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 367.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 368.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 369.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 370.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 371.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 372.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 373.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 374.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 375.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 376.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 377.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 378.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 379.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 380.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 381.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 382.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 383.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 384.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 385.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 386.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 387.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 388.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 389.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 390.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 391.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 392.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 393.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 394.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 395.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 396.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 397.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 398.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 399.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 400.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 401.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 402.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 403.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 404.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 405.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 406.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 407.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 408.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 409.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 410.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 411.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 412.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 413.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 414.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 415.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 416.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 417.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 418.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 419.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 420.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 421.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 422.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 423.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 424.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 425.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 426.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 427.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 428.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 429.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 430.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 431.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 432.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 433.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 434.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 435.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 436.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 437.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 438.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 439.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 440.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 441.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 442.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 443.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 444.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 445.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 446.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 447.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 448.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 449.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 450.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 451.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 452.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 453.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 454.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 455.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 456.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 457.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 458.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 459.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 460.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 461.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 462.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 463.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 464.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 465.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 466.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 467.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 468.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 469.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 470.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 471.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 472.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 473.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 474.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 475.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 476.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 477.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 478.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 479.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 480.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 481.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 482.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 483.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 484.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 485.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 486.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 487.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 488.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 489.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 490.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 491.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 492.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 493.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 494.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 495.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 496.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 497.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 498.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 499.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 500.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 501.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 502.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 503.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 504.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 505.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 506.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 507.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 508.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 509.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 510.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 511.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 512.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 513.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 514.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 515.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 516.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 517.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 518.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 519.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 520.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 521.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 522.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 523.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 524.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 525.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 526.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 527.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 528.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 529.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 530.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 531.000 MHz SC-QAM (Annex A(Eu.1M)) locked SC-QAM
[00:09:25 01/01/1970] [CmDocsisCtlThread] BcmCmDsChan::DsLockOk: (BcmCmDsChan 0)
hwRxId=0 freq=0 dcid=0

******************************************
DOWNSTREAM STATUS
******************************************
HW Channel ID = 0
Phy type: SC-QAM
DS active chan settings:
ds chan id = 0
center freq, Hz = 531000000 Hz
primary capable = false
status event rpt bitmask = 0

CM HW Detected DS Phy Settings:


Center Freq, Hz = 531000000
QAM = Locked
FEC = Locked
Carrier Freq Offset, kHz = 0
Channel Width, Hz = 8000000
Modulation = Qam256
Interleaver = Taps12Incr17
Symbol Rate, sym/sec = 6952000

******************************************

[00:09:26 01/01/1970] [CmDocsisCtlThread]


BcmCmMacDomainSetsState::StartDsMacMddInit:
**********************************************
Waiting for MDDs...
**********************************************

CM/DocsisCtl>
BcmCmDocsisCtlMsgACT::HandleEvent() @time=567740 event_code=4 (kCmPriDsMddSetsOk)
MDD diplexer band edge not specified.
MDD Plant US Frequency Range = extended.
Requested Spectrum = US:(0 MHz..85 MHz) DS:(0 MHz..0 MHz)
Best Match = 0: US:(5 MHz..85 MHz) DS:(108 MHz..1218 MHz)
Switchable diplexer ECN support disabled. NOT switching diplexer.
[00:09:27 01/01/1970] [CmDocsisCtlThread]
BcmCmMdDsSgDiscState::TrimSgSetWithoutThisDcid:
1 candidate MD-DS-SG remain after TrimSgSetWithoutThisDcid( target_dcid )
for target_dcid=0x01 (1)
[00:09:27 01/01/1970] [CmDocsisCtlThread] BcmCmMdDsSgDiscState::StartMdDsSgDisc:
special case: one and only one MD-DS-SG contains mdd_dcid.
fMdDsSgId=0x1d (29)
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , M-d++a+i-+Ty-eA+dA++e|:
i_L-ca+A++e|A: 1
Chec+ +D_A++e|A
Cha++e+ Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1

MD-DS-SG discovery info:

fCmMdDsSgDiscState = 6 (kMdDsSgDiscDone)
fMdDsSgId = 0x1d (29)
fMdDsSgDiscovered = 1

Trimmed Candidate Downstream Service Group Settings List: list size = 1

sgid size member dcid's


---- ---- -------------
29 34 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
27 28 29 30 31 32 159 160

Downstream Active Channel Settings List:

dcid type frequency prim capable rpt enable mod/annex or PLC params
---- -------- --------- ------------ ---------- -----------------------
1 SC-QAM 531000000 y 0x36 256QAM/AnnexA
2 SC-QAM 539000000 y 0x36 256QAM/AnnexA
3 SC-QAM 547000000 y 0x36 256QAM/AnnexA
4 SC-QAM 555000000 y 0x36 256QAM/AnnexA
5 SC-QAM 563000000 y 0x36 256QAM/AnnexA
6 SC-QAM 571000000 y 0x36 256QAM/AnnexA
7 SC-QAM 579000000 y 0x36 256QAM/AnnexA
8 SC-QAM 587000000 y 0x36 256QAM/AnnexA
9 SC-QAM 595000000 y 0x36 256QAM/AnnexA
10 SC-QAM 603000000 y 0x36 256QAM/AnnexA
11 SC-QAM 611000000 y 0x36 256QAM/AnnexA
12 SC-QAM 619000000 y 0x36 256QAM/AnnexA
13 SC-QAM 627000000 y 0x36 256QAM/AnnexA
14 SC-QAM 635000000 y 0x36 256QAM/AnnexA
15 SC-QAM 643000000 y 0x36 256QAM/AnnexA
16 SC-QAM 651000000 y 0x36 256QAM/AnnexA
17 SC-QAM 659000000 y 0x36 256QAM/AnnexA
18 SC-QAM 667000000 y 0x36 256QAM/AnnexA
19 SC-QAM 675000000 y 0x36 256QAM/AnnexA
20 SC-QAM 683000000 y 0x36 256QAM/AnnexA
21 SC-QAM 691000000 y 0x36 256QAM/AnnexA
22 SC-QAM 699000000 y 0x36 256QAM/AnnexA
23 SC-QAM 707000000 y 0x36 256QAM/AnnexA
24 SC-QAM 715000000 y 0x36 256QAM/AnnexA
25 SC-QAM 723000000 y 0x36 256QAM/AnnexA
26 SC-QAM 731000000 y 0x36 256QAM/AnnexA
27 SC-QAM 739000000 y 0x36 256QAM/AnnexA
28 SC-QAM 747000000 y 0x36 256QAM/AnnexA
29 SC-QAM 755000000 y 0x36 256QAM/AnnexA
30 SC-QAM 763000000 y 0x36 256QAM/AnnexA
31 SC-QAM 771000000 y 0x36 256QAM/AnnexA
32 SC-QAM 779000000 y 0x36 256QAM/AnnexA
159 OFDM PLC 897000000 n 0x36 25Khz/5us/0.625us
160 OFDM PLC 361000000 n 0x36 50Khz/0.9375us/0.625us

Trimmed Downstream Ambiguity Resolution Frequency List: list size = 3

531000000-sc_qam 539000000-sc_qam 547000000-sc_qam

visible dcid set = 1

freq with visible dcid set = 531000000

BcmCmDocsisCtlMsgACT::HandleEvent() @time=568340 event_code=11 (kCmMdDsSgDiscDone)

BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=true
[00:09:28 01/01/1970] [CmDocsisCtlThread]
BcmDocsisCmHalIf::SetPrimaryDownstreamChannel: (DOCSIS CableModem HalIf)
Installing primary downstream channel index: 0
SetRatios called with primary downstream channel number = 0
AnnexMode[0] = 1 QAM_Mode[0] = 256
Num/Den = 869/1280
3390 SCDMA/OFDM mode - ChannelNumber = 0 Numerator = 869 Denominator = 1280
CM/DocsisCtl> ... TCOFDM - DTR is now locked.... (T2=150ms Sync=14)

Given a 216 MHz TCOFDM clock, the nominal value for the DTR FCW is 0xC22E45067
The DTR FCW is 0xc22e8937 - that value is good (5, within 100 ppm)
*
* Starting latency compensation thread.
*
Kicked off the DPLL
LE Done bit was set
LE Done bit was set
SCQAM DS clock source.
PLL in Leaky mode.
PLL Fn = 6, k1 = 18, k2 = 19
[00:09:28 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context=1 (ErrorRecovery)
[00:09:28 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context is error recovery or startup.
Always use last good upstream target chan id=1
[00:09:28 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper) Locked on the downstream. Waiting for UCDs...
CM/DocsisCtl> [00:09:30 01/01/1970] [CmDocsisCtlThread]
BcmCmMultiUsHelper::TmUcdRxTimerEvent: (Cm Multi US Helper)
ucd gathering ok.

[00:09:30 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper) state at
entry:

Channel targeting:
Downstream:
fTargetDsFreqHz = 0 (0)
fCurrentDsFreqHz = 0x1fa66ac0 (531000000)
fStoredDsFreqHz = 0x29020c00 (688000000)

Upstream:
fDestSingleTxTargetUsChanId = 0x1 (1)
fTargetingContext = 1 (ErrorRecovery)

Startup UCD Selection Info:

low priority candidate ucid list = 1 4 2 3 7 8 5 6


happy home ucid set = 1 2 3 4

Upstream Active Channel Settings:

ucid rpt enable sel prio MAP source dcid's


---- ---------- -------- -----------------
1 0x1c0 0
2 0x1c0 0
3 0x1c0 0
4 0x1c0 0
5 0x1c0 0
6 0x1c0 0
7 0x1c0 0
8 0x1c0 0

BcmCmUsTargetMset (a.k.a. usable UCDs gathered during startup):

us config
phy change ranging scdma
type ucid dcid count tried? enabled?
---- ---- ---- ------ ------- --------
3 1 1 4 n n
3 2 1 4 n n
3 3 1 4 n n
3 4 1 4 n n
3 5 1 4 n n
3 6 1 4 n n
3 7 1 4 n n
3 8 1 4 n n

[00:09:30 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper)
starting docs3 upstream initialization on target ucid=1
with upstream phy type 3 on hardware transmitter index 0

[00:09:30 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::ExecuteTccCmd: hwTxId=0


docs ucid=0
[00:09:30 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0
[00:09:30 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::InstallUsSets: Installing
UCD w/ucid for UCID=1 for CM hardware tx chan 0

[00:09:30 01/01/1970] [CmDocsisCtlThread]


BcmCmUsSetsState::TestAndLaunchUsTimeSync: starting upstream time sync
acquisition...
[00:09:30 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefOk: (Cm
Multi US Helper) target hwTxId=0
[00:09:30 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::UsTimeRefOk: upstream time
sync acquired for fHwTxId=0

== Beginning initial ranging for Docsis UCID 1 ==


Minimum transmit power is 17 dBmV
Maximum transmit power is 53 dBmV
Stored power level for UCID 1 is 38.75 dBmV
Using per transmitter stored initial upstream power = 38.75 dBmV hwTxId = 0 docsis
UCID = 1
RNG-RSP UsChanId=1 Adj: tim=1893 freq=63 Stat=Continue (CmdPwr (UsChanId-dBmV):
(1-41.25) )
[00:09:31 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0xc9
RNG-RSP UsChanId=1 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (1-
41.25) )
RNG-RSP UsChanId=1 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (1-
41.25) )
RNG-RSP UsChanId=1 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (1-
41.25) )
RNG-RSP UsChanId=1 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (1-
41.25) )
RNG-RSP UsChanId=1 Adj: tim=0 freq=0 Stat=Success (CmdPwr (UsChanId-dBmV): (1-
41.25) )
[00:09:36 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::FirstRngSuccess:
(CmDocsisCtlThread)
first RNG-RSP w/status==SUCCESS for hwTxId=0 and DOCSIS ucid=1
[00:09:36 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::LaunchEaeBpkm:
(CmDocsisCtlThread) BPKM enabled. starting Early Authentication and Encryption BPKM
key requests. Primary Sid = 201
CM/DocsisCtl> dsdiag

Active Downstream Channel Diagnostics:


rx id dcid freq, hz qam fec snr, dB power, dBmV modulation
plc prfA
----- ---- ---------- --- --- --------- ----------- ----------
0* 1 531000000 y y 41 -3 Qam256

* indicates currently configured primary downstream channel

CM/DocsisCtl> Bandwidth request failure! Status = 0

BcmCmUsChanTimerMuxACT::HandleEvent() @time=766210 fTimerType=5


(kT4NoStationMaint) hwTxId=0 docs ucid=1
[00:12:46 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::T4NoStationMaintEvent: ERROR - no Station Maint map op error.
hwTxId=0 docs ucid=1
[00:12:46 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::CommonRngErrorHandler: reason=10 (T4NoStationMaintTimeout)
hwTxId=0 docs ucid=1
[00:12:46 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) Purging DS
frequency 531000000 from current scan pass due to pre-registration restart error
[00:12:46 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) reinit MAC #3:
T4NoStationMaintTimeout

[00:12:46 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::Reset:


(CmDocsisCtlThread) DefaultSnmpAgentClass::RestartPendingEvent for Vendor CM
Agent w/ BRCM Factory Support
Logging event: Received Response to Broadcast Maintenance Request, But no Unicast
Maintenance opportunities received - T4 time out;CM-MAC=fc:4a:e9:de:ad:88;CMTS-
MAC=28:52:61:fa:d8:78;CM-QOS=1.1;CM-VER=3.1;
Vendor CM Agent w/ BRCM Factory Support updating ifTableLastChange.
Vendor CM Agent w/ BRCM Factory Support resetting to default state.
Vendor CM Agent w/ BRCM Factory Support destroying users...
Vendor CM Agent w/ BRCM Factory Support destroying notifies...
Vendor CM Agent w/ BRCM Factory Support destroying views...
Allowing DOCS-CABLE-DEVICE-MIB IP filters.
Vendor CM Agent w/ BRCM Factory Support deferring traps.
Received RG Event 0x80000001 State 0x1
eRouter Linux WAN Down
[00:12:46 01/01/1970] [eRouterMsgPipe] eRouterMsgPipe::UpdateIpNetToMediaEntry:
(eRouterMsgPipe) eRouter IP address:0.0.0.0
00:12:46.500 01/01/1970 (CALC) mtaCmStatusInfo() - MTA is Signaled: *NOT-
OPERATIONAL* (Stat=0x1) emtaCurState = 0.
EmtaSnmpAgent::SoftReset
Pausing trap thread
emta factory agentResetting to default state.
emta factory agent destroying users...
emta factory agent destroying notifies...
emta factory agent destroying views...
emta factory agent entering RFC-2576 Coexistence security mode.
emta factory agent entering Basic/Hybrid flow provisioning mode.
Resuming trap thread
Stopping DHCP/ToD/TFTP (client requested)...
[00:12:46 01/01/1970] [CmDocsisIpThread] BcmEcosIpHalIf::RemoveIpv6Address: (IP
Stack1 HalIf) ERROR - Failed to remove IPv6 address fe80::fe4a:e9ff:fede:ad88/64
from the stack!
[00:12:46 01/01/1970] [CmDocsisIpThread] BcmDhcpV6ClientIf::ReleaseAddresses:
(DHCPv6 ClientIf for IP Stack1) ERROR - IA state is initial; there is no address to
release.
BcmDocsis3DsMacEnableMulticastDsidForwarding 0; primary DS = 0
SCQAM DSID filter control = 0x00
OFDM DSID filter control = 0x01
Deleting DOCSIS 1.0 CoS Settings for SID 0xc9
[00:12:46 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows:
(DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along
with associated Classifiers and PHS rules...
[00:12:46 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState:
(CmDocsisCtlThread)
[00:12:46 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Primary SID for usHwChannel 0 to 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 1
Updating US chan 8 data Profile test msg for Sid: 0x0.
Updating US chan 9 data Profile test msg for Sid: 0x0.
CM/DocsisCtl> [00:12:47 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL declared PULSE lost!
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=false
[00:12:47 01/01/1970] [CmDocsisCtlThread] BcmCmMultiDsHelper::PreRegDsChanChange:
target freq hz = 0
reason string = ErrorRecovery
CmInitReason = 16

Starting DS scanning...
[00:12:47 01/01/1970] [CmDocsisCtlThread] BcmCmDownstreamScan::StartScan: Starting
DS scan
Checking for cable cut...

CM/DocsisCtl> Plant power is 15.45

Cable connected

CM/DocsisCtl> Scanning 532.000 MHz SC-QAM (Annex A(Eu.1M))


Scanning 533.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 534.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 535.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 536.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 537.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 538.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 539.000 MHz SC-QAM (Annex A(Eu.1M)) locked SC-QAM
[00:12:50 01/01/1970] [CmDocsisCtlThread] BcmCmDsChan::DsLockOk: (BcmCmDsChan 0)
hwRxId=0 freq=0 dcid=0

******************************************
DOWNSTREAM STATUS
******************************************
HW Channel ID = 0
Phy type: SC-QAM
DS active chan settings:
ds chan id = 0
center freq, Hz = 539000000 Hz
primary capable = false
status event rpt bitmask = 0
CM HW Detected DS Phy Settings:
Center Freq, Hz = 539000000
QAM = Locked
FEC = Locked
Carrier Freq Offset, kHz = 0
Channel Width, Hz = 8000000
Modulation = Qam256
Interleaver = Taps12Incr17
Symbol Rate, sym/sec = 6952000

******************************************

[00:12:50 01/01/1970] [CmDocsisCtlThread]


BcmCmMacDomainSetsState::StartDsMacMddInit:
**********************************************
Waiting for MDDs...
**********************************************

CM/DocsisCtl>
BcmCmDocsisCtlMsgACT::HandleEvent() @time=771750 event_code=4 (kCmPriDsMddSetsOk)
MDD diplexer band edge not specified.
MDD Plant US Frequency Range = extended.
Requested Spectrum = US:(0 MHz..85 MHz) DS:(0 MHz..0 MHz)
Best Match = 0: US:(5 MHz..85 MHz) DS:(108 MHz..1218 MHz)
Switchable diplexer ECN support disabled. NOT switching diplexer.
[00:12:51 01/01/1970] [CmDocsisCtlThread]
BcmCmMdDsSgDiscState::TrimSgSetWithoutThisDcid:
1 candidate MD-DS-SG remain after TrimSgSetWithoutThisDcid( target_dcid )
for target_dcid=0x02 (2)
[00:12:51 01/01/1970] [CmDocsisCtlThread] BcmCmMdDsSgDiscState::StartMdDsSgDisc:
special case: one and only one MD-DS-SG contains mdd_dcid.
fMdDsSgId=0x1d (29)
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , M-d++a+i-+Ty-eA+dA++e|:
i_L-ca+A++e|A: 1
Chec+ +D_A++e|A
Cha++e+ Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1

MD-DS-SG discovery info:

fCmMdDsSgDiscState = 6 (kMdDsSgDiscDone)
fMdDsSgId = 0x1d (29)
fMdDsSgDiscovered = 1

Trimmed Candidate Downstream Service Group Settings List: list size = 1

sgid size member dcid's


---- ---- -------------
29 34 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
27 28 29 30 31 32 159 160

Downstream Active Channel Settings List:

dcid type frequency prim capable rpt enable mod/annex or PLC params
---- -------- --------- ------------ ---------- -----------------------
1 SC-QAM 531000000 y 0x36 256QAM/AnnexA
2 SC-QAM 539000000 y 0x36 256QAM/AnnexA
3 SC-QAM 547000000 y 0x36 256QAM/AnnexA
4 SC-QAM 555000000 y 0x36 256QAM/AnnexA
5 SC-QAM 563000000 y 0x36 256QAM/AnnexA
6 SC-QAM 571000000 y 0x36 256QAM/AnnexA
7 SC-QAM 579000000 y 0x36 256QAM/AnnexA
8 SC-QAM 587000000 y 0x36 256QAM/AnnexA
9 SC-QAM 595000000 y 0x36 256QAM/AnnexA
10 SC-QAM 603000000 y 0x36 256QAM/AnnexA
11 SC-QAM 611000000 y 0x36 256QAM/AnnexA
12 SC-QAM 619000000 y 0x36 256QAM/AnnexA
13 SC-QAM 627000000 y 0x36 256QAM/AnnexA
14 SC-QAM 635000000 y 0x36 256QAM/AnnexA
15 SC-QAM 643000000 y 0x36 256QAM/AnnexA
16 SC-QAM 651000000 y 0x36 256QAM/AnnexA
17 SC-QAM 659000000 y 0x36 256QAM/AnnexA
18 SC-QAM 667000000 y 0x36 256QAM/AnnexA
19 SC-QAM 675000000 y 0x36 256QAM/AnnexA
20 SC-QAM 683000000 y 0x36 256QAM/AnnexA
21 SC-QAM 691000000 y 0x36 256QAM/AnnexA
22 SC-QAM 699000000 y 0x36 256QAM/AnnexA
23 SC-QAM 707000000 y 0x36 256QAM/AnnexA
24 SC-QAM 715000000 y 0x36 256QAM/AnnexA
25 SC-QAM 723000000 y 0x36 256QAM/AnnexA
26 SC-QAM 731000000 y 0x36 256QAM/AnnexA
27 SC-QAM 739000000 y 0x36 256QAM/AnnexA
28 SC-QAM 747000000 y 0x36 256QAM/AnnexA
29 SC-QAM 755000000 y 0x36 256QAM/AnnexA
30 SC-QAM 763000000 y 0x36 256QAM/AnnexA
31 SC-QAM 771000000 y 0x36 256QAM/AnnexA
32 SC-QAM 779000000 y 0x36 256QAM/AnnexA
159 OFDM PLC 897000000 n 0x36 25Khz/5us/0.625us
160 OFDM PLC 361000000 n 0x36 50Khz/0.9375us/0.625us

Trimmed Downstream Ambiguity Resolution Frequency List: list size = 3

531000000-sc_qam 539000000-sc_qam 547000000-sc_qam

visible dcid set = 2

freq with visible dcid set = 539000000

BcmCmDocsisCtlMsgACT::HandleEvent() @time=772340 event_code=11 (kCmMdDsSgDiscDone)

BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=true
[00:12:52 01/01/1970] [CmDocsisCtlThread]
BcmDocsisCmHalIf::SetPrimaryDownstreamChannel: (DOCSIS CableModem HalIf)
Installing primary downstream channel index: 0
SetRatios called with primary downstream channel number = 0
AnnexMode[0] = 1 QAM_Mode[0] = 256
Num/Den = 869/1280
3390 SCDMA/OFDM mode - ChannelNumber = 0 Numerator = 869 Denominator = 1280
CM/DocsisCtl> [00:12:52 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL failed to acquire sync or lost sync!
... TCOFDM - DTR is now locked.... (T2=150ms Sync=14)

Given a 216 MHz TCOFDM clock, the nominal value for the DTR FCW is 0xC22E45067
The DTR FCW is 0xc22e8b04 - that value is good (5, within 100 ppm)
Kicked off the DPLL
LE Done bit was set
LE Done bit was set
SCQAM DS clock source.
PLL in Leaky mode.
PLL Fn = 6, k1 = 18, k2 = 19
[00:12:52 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context=1 (ErrorRecovery)
[00:12:52 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context is error recovery or startup.
Always use last good upstream target chan id=1
[00:12:52 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper) Locked on the downstream. Waiting for UCDs...
[00:12:52 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefFail: (Cm
Multi US Helper) target hwTxId=0
CM/DocsisCtl> [00:12:54 01/01/1970] [CmDocsisCtlThread]
BcmCmMultiUsHelper::TmUcdRxTimerEvent: (Cm Multi US Helper)
ucd gathering ok.

[00:12:54 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper) state at
entry:

Channel targeting:
Downstream:
fTargetDsFreqHz = 0 (0)
fCurrentDsFreqHz = 0x20207cc0 (539000000)
fStoredDsFreqHz = 0x29020c00 (688000000)

Upstream:
fDestSingleTxTargetUsChanId = 0x1 (1)
fTargetingContext = 1 (ErrorRecovery)

Startup UCD Selection Info:

low priority candidate ucid list = 1 2 4 3 5 7 6 8


happy home ucid set = 1 2 3 4

Upstream Active Channel Settings:

ucid rpt enable sel prio MAP source dcid's


---- ---------- -------- -----------------
1 0x1c0 0
2 0x1c0 0
3 0x1c0 0
4 0x1c0 0
5 0x1c0 0
6 0x1c0 0
7 0x1c0 0
8 0x1c0 0

BcmCmUsTargetMset (a.k.a. usable UCDs gathered during startup):

us config
phy change ranging scdma
type ucid dcid count tried? enabled?
---- ---- ---- ------ ------- --------
3 1 2 4 n n
3 2 2 4 n n
3 3 2 4 n n
3 4 2 4 n n
3 5 2 4 n n
3 6 2 4 n n
3 7 2 4 n n
3 8 2 4 n n

[00:12:54 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper)
starting docs3 upstream initialization on target ucid=1
with upstream phy type 3 on hardware transmitter index 0
[00:12:54 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::ExecuteTccCmd: hwTxId=0
docs ucid=0
[00:12:54 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0
[00:12:54 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::InstallUsSets: Installing
UCD w/ucid for UCID=1 for CM hardware tx chan 0

[00:12:54 01/01/1970] [CmDocsisCtlThread]


BcmCmUsSetsState::TestAndLaunchUsTimeSync: starting upstream time sync
acquisition...
[00:12:54 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefOk: (Cm
Multi US Helper) target hwTxId=0
[00:12:54 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::UsTimeRefOk: upstream time
sync acquired for fHwTxId=0

== Beginning initial ranging for Docsis UCID 1 ==


Minimum transmit power is 17 dBmV
Maximum transmit power is 53 dBmV
Stored power level for UCID 1 is 39 dBmV
Using per transmitter stored initial upstream power = 39 dBmV hwTxId = 0 docsis
UCID = 1
RNG-RSP UsChanId=1 Adj: tim=1900 freq=-114 Stat=Continue (CmdPwr (UsChanId-
dBmV): (1-41.25) )
[00:12:55 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0xc9
RNG-RSP UsChanId=1 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (1-
41.25) )
RNG-RSP UsChanId=1 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (1-
41.25) )
RNG-RSP UsChanId=1 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (1-
41.25) )
RNG-RSP UsChanId=1 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (1-
41.25) )
RNG-RSP UsChanId=1 Adj: tim=0 freq=0 Stat=Success (CmdPwr (UsChanId-dBmV): (1-
41.25) )
[00:13:00 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::FirstRngSuccess:
(CmDocsisCtlThread)
first RNG-RSP w/status==SUCCESS for hwTxId=0 and DOCSIS ucid=1
[00:13:00 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::LaunchEaeBpkm:
(CmDocsisCtlThread) BPKM enabled. starting Early Authentication and Encryption BPKM
key requests. Primary Sid = 201
CM/DocsisCtl> Bandwidth request failure! Status = 0

BcmCmUsChanTimerMuxACT::HandleEvent() @time=970490 fTimerType=5


(kT4NoStationMaint) hwTxId=0 docs ucid=1
[00:16:10 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::T4NoStationMaintEvent: ERROR - no Station Maint map op error.
hwTxId=0 docs ucid=1
[00:16:10 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::CommonRngErrorHandler: reason=10 (T4NoStationMaintTimeout)
hwTxId=0 docs ucid=1
[00:16:10 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) Purging DS
frequency 539000000 from current scan pass due to pre-registration restart error
[00:16:10 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) reinit MAC #4:
T4NoStationMaintTimeout
[00:16:10 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::Reset:
(CmDocsisCtlThread) DefaultSnmpAgentClass::RestartPendingEvent for Vendor CM
Agent w/ BRCM Factory Support
Logging event: Received Response to Broadcast Maintenance Request, But no Unicast
Maintenance opportunities received - T4 time out;CM-MAC=fc:4a:e9:de:ad:88;CMTS-
MAC=28:52:61:fa:d8:78;CM-QOS=1.1;CM-VER=3.1;
Vendor CM Agent w/ BRCM Factory Support updating ifTableLastChange.
Vendor CM Agent w/ BRCM Factory Support resetting to default state.
Vendor CM Agent w/ BRCM Factory Support destroying users...
Vendor CM Agent w/ BRCM Factory Support destroying notifies...
Vendor CM Agent w/ BRCM Factory Support destroying views...
Allowing DOCS-CABLE-DEVICE-MIB IP filters.
Vendor CM Agent w/ BRCM Factory Support deferring traps.
Received RG Event 0x80000001 State 0x1
eRouter Linux WAN Down
[00:16:10 01/01/1970] [eRouterMsgPipe] eRouterMsgPipe::UpdateIpNetToMediaEntry:
(eRouterMsgPipe) eRouter IP address:0.0.0.0
00:16:10.780 01/01/1970 (CALC) mtaCmStatusInfo() - MTA is Signaled: *NOT-
OPERATIONAL* (Stat=0x1) emtaCurState = 0.
EmtaSnmpAgent::SoftReset
Pausing trap thread
emta factory agentResetting to default state.
emta factory agent destroying users...
emta factory agent destroying notifies...
emta factory agent destroying views...
emta factory agent entering RFC-2576 Coexistence security mode.
emta factory agent entering Basic/Hybrid flow provisioning mode.
Resuming trap thread
Stopping DHCP/ToD/TFTP (client requested)...
[00:16:10 01/01/1970] [CmDocsisIpThread] BcmEcosIpHalIf::RemoveIpv6Address: (IP
Stack1 HalIf) ERROR - Failed to remove IPv6 address fe80::fe4a:e9ff:fede:ad88/64
from the stack!
[00:16:10 01/01/1970] [CmDocsisIpThread] BcmDhcpV6ClientIf::ReleaseAddresses:
(DHCPv6 ClientIf for IP Stack1) ERROR - IA state is initial; there is no address to
release.
BcmDocsis3DsMacEnableMulticastDsidForwarding 0; primary DS = 0
SCQAM DSID filter control = 0x00
OFDM DSID filter control = 0x01
Deleting DOCSIS 1.0 CoS Settings for SID 0xc9
[00:16:11 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows:
(DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along
with associated Classifiers and PHS rules...
[00:16:11 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState:
(CmDocsisCtlThread)
[00:16:11 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Primary SID for usHwChannel 0 to 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 1
Updating US chan 8 data Profile test msg for Sid: 0x0.
Updating US chan 9 data Profile test msg for Sid: 0x0.
CM/DocsisCtl> [00:16:11 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL declared PULSE lost!
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=false
[00:16:12 01/01/1970] [CmDocsisCtlThread] BcmCmMultiDsHelper::PreRegDsChanChange:
target freq hz = 0
reason string = ErrorRecovery
CmInitReason = 16
Starting DS scanning...
[00:16:12 01/01/1970] [CmDocsisCtlThread] BcmCmDownstreamScan::StartScan: Starting
DS scan
Checking for cable cut...

CM/DocsisCtl> Plant power is 15.45

Cable connected

CM/DocsisCtl> Scanning 540.000 MHz SC-QAM (Annex A(Eu.1M))


Scanning 541.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 542.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 543.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 544.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 545.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 546.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 547.000 MHz SC-QAM (Annex A(Eu.1M)) locked SC-QAM
[00:16:14 01/01/1970] [CmDocsisCtlThread] BcmCmDsChan::DsLockOk: (BcmCmDsChan 0)
hwRxId=0 freq=0 dcid=0

******************************************
DOWNSTREAM STATUS
******************************************
HW Channel ID = 0
Phy type: SC-QAM
DS active chan settings:
ds chan id = 0
center freq, Hz = 547000000 Hz
primary capable = false
status event rpt bitmask = 0

CM HW Detected DS Phy Settings:


Center Freq, Hz = 547000000
QAM = Locked
FEC = Locked
Carrier Freq Offset, kHz = 0
Channel Width, Hz = 8000000
Modulation = Qam256
Interleaver = Taps12Incr17
Symbol Rate, sym/sec = 6952000

******************************************

[00:16:14 01/01/1970] [CmDocsisCtlThread]


BcmCmMacDomainSetsState::StartDsMacMddInit:
**********************************************
Waiting for MDDs...
**********************************************

CM/DocsisCtl>
BcmCmDocsisCtlMsgACT::HandleEvent() @time=975750 event_code=4 (kCmPriDsMddSetsOk)
MDD diplexer band edge not specified.
MDD Plant US Frequency Range = extended.
Requested Spectrum = US:(0 MHz..85 MHz) DS:(0 MHz..0 MHz)
Best Match = 0: US:(5 MHz..85 MHz) DS:(108 MHz..1218 MHz)
Switchable diplexer ECN support disabled. NOT switching diplexer.
[00:16:15 01/01/1970] [CmDocsisCtlThread]
BcmCmMdDsSgDiscState::TrimSgSetWithoutThisDcid:
1 candidate MD-DS-SG remain after TrimSgSetWithoutThisDcid( target_dcid )
for target_dcid=0x03 (3)
[00:16:15 01/01/1970] [CmDocsisCtlThread] BcmCmMdDsSgDiscState::StartMdDsSgDisc:
special case: one and only one MD-DS-SG contains mdd_dcid.
fMdDsSgId=0x1d (29)
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , M-d++a+i-+Ty-eA+dA++e|:
i_L-ca+A++e|A: 1
Chec+ +D_A++e|A
Cha++e+ Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1

MD-DS-SG discovery info:

fCmMdDsSgDiscState = 6 (kMdDsSgDiscDone)
fMdDsSgId = 0x1d (29)
fMdDsSgDiscovered = 1
Trimmed Candidate Downstream Service Group Settings List: list size = 1

sgid size member dcid's


---- ---- -------------
29 34 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
27 28 29 30 31 32 159 160

Downstream Active Channel Settings List:

dcid type frequency prim capable rpt enable mod/annex or PLC params
---- -------- --------- ------------ ---------- -----------------------
1 SC-QAM 531000000 y 0x36 256QAM/AnnexA
2 SC-QAM 539000000 y 0x36 256QAM/AnnexA
3 SC-QAM 547000000 y 0x36 256QAM/AnnexA
4 SC-QAM 555000000 y 0x36 256QAM/AnnexA
5 SC-QAM 563000000 y 0x36 256QAM/AnnexA
6 SC-QAM 571000000 y 0x36 256QAM/AnnexA
7 SC-QAM 579000000 y 0x36 256QAM/AnnexA
8 SC-QAM 587000000 y 0x36 256QAM/AnnexA
9 SC-QAM 595000000 y 0x36 256QAM/AnnexA
10 SC-QAM 603000000 y 0x36 256QAM/AnnexA
11 SC-QAM 611000000 y 0x36 256QAM/AnnexA
12 SC-QAM 619000000 y 0x36 256QAM/AnnexA
13 SC-QAM 627000000 y 0x36 256QAM/AnnexA
14 SC-QAM 635000000 y 0x36 256QAM/AnnexA
15 SC-QAM 643000000 y 0x36 256QAM/AnnexA
16 SC-QAM 651000000 y 0x36 256QAM/AnnexA
17 SC-QAM 659000000 y 0x36 256QAM/AnnexA
18 SC-QAM 667000000 y 0x36 256QAM/AnnexA
19 SC-QAM 675000000 y 0x36 256QAM/AnnexA
20 SC-QAM 683000000 y 0x36 256QAM/AnnexA
21 SC-QAM 691000000 y 0x36 256QAM/AnnexA
22 SC-QAM 699000000 y 0x36 256QAM/AnnexA
23 SC-QAM 707000000 y 0x36 256QAM/AnnexA
24 SC-QAM 715000000 y 0x36 256QAM/AnnexA
25 SC-QAM 723000000 y 0x36 256QAM/AnnexA
26 SC-QAM 731000000 y 0x36 256QAM/AnnexA
27 SC-QAM 739000000 y 0x36 256QAM/AnnexA
28 SC-QAM 747000000 y 0x36 256QAM/AnnexA
29 SC-QAM 755000000 y 0x36 256QAM/AnnexA
30 SC-QAM 763000000 y 0x36 256QAM/AnnexA
31 SC-QAM 771000000 y 0x36 256QAM/AnnexA
32 SC-QAM 779000000 y 0x36 256QAM/AnnexA
159 OFDM PLC 897000000 n 0x36 25Khz/5us/0.625us
160 OFDM PLC 361000000 n 0x36 50Khz/0.9375us/0.625us

Trimmed Downstream Ambiguity Resolution Frequency List: list size = 3

531000000-sc_qam 539000000-sc_qam 547000000-sc_qam

visible dcid set = 3

freq with visible dcid set = 547000000

BcmCmDocsisCtlMsgACT::HandleEvent() @time=976340 event_code=11 (kCmMdDsSgDiscDone)


BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=true
[00:16:16 01/01/1970] [CmDocsisCtlThread]
BcmDocsisCmHalIf::SetPrimaryDownstreamChannel: (DOCSIS CableModem HalIf)
Installing primary downstream channel index: 0
SetRatios called with primary downstream channel number = 0
AnnexMode[0] = 1 QAM_Mode[0] = 256
Num/Den = 869/1280
3390 SCDMA/OFDM mode - ChannelNumber = 0 Numerator = 869 Denominator = 1280
CM/DocsisCtl> [00:16:16 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL failed to acquire sync or lost sync!
... TCOFDM - DTR is now locked.... (T2=150ms Sync=14)

Given a 216 MHz TCOFDM clock, the nominal value for the DTR FCW is 0xC22E45067
The DTR FCW is 0xc22e85fb - that value is good (5, within 100 ppm)
Kicked off the DPLL
LE Done bit was set
LE Done bit was set
SCQAM DS clock source.
PLL in Leaky mode.
PLL Fn = 6, k1 = 18, k2 = 19
[00:16:16 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context=1 (ErrorRecovery)
[00:16:16 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context is error recovery or startup.
Always use last good upstream target chan id=1
[00:16:16 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper) Locked on the downstream. Waiting for UCDs...
[00:16:16 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefFail: (Cm
Multi US Helper) target hwTxId=0
CM/DocsisCtl> [00:16:18 01/01/1970] [CmDocsisCtlThread]
BcmCmMultiUsHelper::TmUcdRxTimerEvent: (Cm Multi US Helper)
ucd gathering ok.

[00:16:18 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper) state at
entry:

Channel targeting:
Downstream:
fTargetDsFreqHz = 0 (0)
fCurrentDsFreqHz = 0x209a8ec0 (547000000)
fStoredDsFreqHz = 0x29020c00 (688000000)

Upstream:
fDestSingleTxTargetUsChanId = 0x1 (1)
fTargetingContext = 1 (ErrorRecovery)

Startup UCD Selection Info:

low priority candidate ucid list = 3 4 1 2 8 5 7 6


happy home ucid set = 1 2 3 4

Upstream Active Channel Settings:


ucid rpt enable sel prio MAP source dcid's
---- ---------- -------- -----------------
1 0x1c0 0
2 0x1c0 0
3 0x1c0 0
4 0x1c0 0
5 0x1c0 0
6 0x1c0 0
7 0x1c0 0
8 0x1c0 0

BcmCmUsTargetMset (a.k.a. usable UCDs gathered during startup):

us config
phy change ranging scdma
type ucid dcid count tried? enabled?
---- ---- ---- ------ ------- --------
3 1 3 4 n n
3 2 3 4 n n
3 3 3 4 n n
3 4 3 4 n n
3 5 3 4 n n
3 6 3 4 n n
3 7 3 4 n n
3 8 3 4 n n

[00:16:18 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper)
starting docs3 upstream initialization on target ucid=3
with upstream phy type 3 on hardware transmitter index 0

[00:16:18 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::ExecuteTccCmd: hwTxId=0


docs ucid=0
[00:16:18 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0
[00:16:18 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::InstallUsSets: Installing
UCD w/ucid for UCID=3 for CM hardware tx chan 0

[00:16:18 01/01/1970] [CmDocsisCtlThread]


BcmCmUsSetsState::TestAndLaunchUsTimeSync: starting upstream time sync
acquisition...
[00:16:18 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefOk: (Cm
Multi US Helper) target hwTxId=0
[00:16:18 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::UsTimeRefOk: upstream time
sync acquired for fHwTxId=0

== Beginning initial ranging for Docsis UCID 3 ==


Minimum transmit power is 17 dBmV
Maximum transmit power is 53 dBmV
Stored power level for UCID 3 is 38 dBmV
Using per transmitter stored initial upstream power = 38 dBmV hwTxId = 0 docsis
UCID = 3
RNG-RSP UsChanId=3 Adj: tim=1855 freq=41 Stat=Continue (CmdPwr (UsChanId-dBmV):
(3-41.25) )
[00:16:19 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0xc9
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (3-
41.75) )
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (3-
41.25) )
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (3-
41.75) )
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (3-
41.25) )
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Success (CmdPwr (UsChanId-dBmV): (3-
41.75) )
[00:16:24 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::FirstRngSuccess:
(CmDocsisCtlThread)
first RNG-RSP w/status==SUCCESS for hwTxId=0 and DOCSIS ucid=3
[00:16:24 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::LaunchEaeBpkm:
(CmDocsisCtlThread) BPKM enabled. starting Early Authentication and Encryption BPKM
key requests. Primary Sid = 201
CM/DocsisCtl> cd /n/docsis31

Active Command Table: CM DOCSIS 3.1 NonVol Commands (docsis31)

CM -> non-vol -> docsis31

CM/NonVol/CM DOCSIS 3.1 NonVol> show

+-------------------------------+
| CM DOCSIS 3.1 NonVol Settings |
+-------------------------------+
Magic Number = 0xd0c20310 '....'
Version (Permanent) = 0.1
Version (Dynamic) = 0.2
Bytes used (Permanent) = 8
Bytes used (Dynamic) = 20
Is Default (Permanent) = 0
Is Default (Dynamic) = 0

Is Manufactured (Permanent) = 1
Is Manufactured (Dynamic) = 1

DOCSIS 3.1 Cable Modem Dynamic NonVol Settings:

DS OFDM PLC frequency (Hz) = 0 Hz

Enabled features (dynamic) = 0x20 Low


0 High
OFDM disabled = false
Disable OFDMA = false
Disable OFDMA startup = false
Suppress CMTS version in MDD = false
OFDM QAM support suppression = false
Disable automatic diplexer switching = true
Disable OFDMA Pre-equalization = false

CM/NonVol/CM DOCSIS 3.1 NonVol> cd /cm

Active Command Table: CM DOCSIS HAL Commands (cm_hal)

CM -> cm_hal
CM/CmHal> diplexer_settings

SWITCHABLE diplexer settings


----------------------------
0: US:(5 MHz..85 MHz) DS:(108 MHz..1218 MHz)
1: US:(5 MHz..204 MHz) DS:(258 MHz..1218 MHz) (ACTIVE)

Diplexer driver settings


------------------------
Diplexer driver uses GPIO 34, STANDARD sense.
Current diplexer driver selection is HIGH

CM/CmHal> cd /doc

Active Command Table: CM DOCSIS Control Thread Commands (docsis_ctl)

CM -> docsis_ctl

CM/DocsisCtl> dsdiag

Active Downstream Channel Diagnostics:

rx id dcid freq, hz qam fec snr, dB power, dBmV modulation


plc prfA
----- ---- ---------- --- --- --------- ----------- ----------
0* 3 547000000 y y 42 -1 Qam256

* indicates currently configured primary downstream channel

CM/DocsisCtl> Bandwidth request failure! Status = 0

BcmCmUsChanTimerMuxACT::HandleEvent() @time=1174270 fTimerType=5


(kT4NoStationMaint) hwTxId=0 docs ucid=3
[00:19:34 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::T4NoStationMaintEvent: ERROR - no Station Maint map op error.
hwTxId=0 docs ucid=3
[00:19:34 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::CommonRngErrorHandler: reason=10 (T4NoStationMaintTimeout)
hwTxId=0 docs ucid=3
[00:19:34 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) Purging DS
frequency 547000000 from current scan pass due to pre-registration restart error
[00:19:34 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) reinit MAC #5:
T4NoStationMaintTimeout

[00:19:34 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::Reset:


(CmDocsisCtlThread) DefaultSnmpAgentClass::RestartPendingEvent for Vendor CM
Agent w/ BRCM Factory Support
Logging event: Received Response to Broadcast Maintenance Request, But no Unicast
Maintenance opportunities received - T4 time out;CM-MAC=fc:4a:e9:de:ad:88;CMTS-
MAC=28:52:61:fa:d8:78;CM-QOS=1.1;CM-VER=3.1;
Vendor CM Agent w/ BRCM Factory Support updating ifTableLastChange.
Vendor CM Agent w/ BRCM Factory Support resetting to default state.
Vendor CM Agent w/ BRCM Factory Support destroying users...
Vendor CM Agent w/ BRCM Factory Support destroying notifies...
Vendor CM Agent w/ BRCM Factory Support destroying views...
Allowing DOCS-CABLE-DEVICE-MIB IP filters.
Vendor CM Agent w/ BRCM Factory Support deferring traps.
Received RG Event 0x80000001 State 0x1
eRouter Linux WAN Down
[00:19:34 01/01/1970] [eRouterMsgPipe] eRouterMsgPipe::UpdateIpNetToMediaEntry:
(eRouterMsgPipe) eRouter IP address:0.0.0.0
00:19:34.560 01/01/1970 (CALC) mtaCmStatusInfo() - MTA is Signaled: *NOT-
OPERATIONAL* (Stat=0x1) emtaCurState = 0.
EmtaSnmpAgent::SoftReset
Pausing trap thread
emta factory agentResetting to default state.
emta factory agent destroying users...
emta factory agent destroying notifies...
emta factory agent destroying views...
emta factory agent entering RFC-2576 Coexistence security mode.
emta factory agent entering Basic/Hybrid flow provisioning mode.
Resuming trap thread
Stopping DHCP/ToD/TFTP (client requested)...
[00:19:34 01/01/1970] [CmDocsisIpThread] BcmEcosIpHalIf::RemoveIpv6Address: (IP
Stack1 HalIf) ERROR - Failed to remove IPv6 address fe80::fe4a:e9ff:fede:ad88/64
from the stack!
[00:19:34 01/01/1970] [CmDocsisIpThread] BcmDhcpV6ClientIf::ReleaseAddresses:
(DHCPv6 ClientIf for IP Stack1) ERROR - IA state is initial; there is no address to
release.
BcmDocsis3DsMacEnableMulticastDsidForwarding 0; primary DS = 0
SCQAM DSID filter control = 0x00
OFDM DSID filter control = 0x01
Deleting DOCSIS 1.0 CoS Settings for SID 0xc9
[00:19:34 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows:
(DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along
with associated Classifiers and PHS rules...
[00:19:34 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState:
(CmDocsisCtlThread)
[00:19:35 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Primary SID for usHwChannel 0 to 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 1
Updating US chan 8 data Profile test msg for Sid: 0x0.
Updating US chan 9 data Profile test msg for Sid: 0x0.
CM/DocsisCtl> [00:19:35 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL declared PULSE lost!
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=false
[00:19:35 01/01/1970] [CmDocsisCtlThread] BcmCmMultiDsHelper::PreRegDsChanChange:
target freq hz = 0
reason string = ErrorRecovery
CmInitReason = 16

Starting DS scanning...
[00:19:35 01/01/1970] [CmDocsisCtlThread] BcmCmDownstreamScan::StartScan: Starting
DS scan
Checking for cable cut...

CM/DocsisCtl> Plant power is 15.35


Cable connected

CM/DocsisCtl> Scanning 548.000 MHz SC-QAM (Annex A(Eu.1M))


Scanning 549.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 550.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 551.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 552.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 553.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 554.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 555.000 MHz SC-QAM (Annex A(Eu.1M)) locked SC-QAM
[00:19:39 01/01/1970] [CmDocsisCtlThread] BcmCmDsChan::DsLockOk: (BcmCmDsChan 0)
hwRxId=0 freq=0 dcid=0

******************************************
DOWNSTREAM STATUS
******************************************
HW Channel ID = 0
Phy type: SC-QAM
DS active chan settings:
ds chan id = 0
center freq, Hz = 555000000 Hz
primary capable = false
status event rpt bitmask = 0

CM HW Detected DS Phy Settings:


Center Freq, Hz = 555000000
QAM = Locked
FEC = Locked
Carrier Freq Offset, kHz = 0
Channel Width, Hz = 8000000
Modulation = Qam256
Interleaver = Taps12Incr17
Symbol Rate, sym/sec = 6952000

******************************************

[00:19:39 01/01/1970] [CmDocsisCtlThread]


BcmCmMacDomainSetsState::StartDsMacMddInit:
**********************************************
Waiting for MDDs...
**********************************************

CM/DocsisCtl>
BcmCmDocsisCtlMsgACT::HandleEvent() @time=1179750 event_code=4 (kCmPriDsMddSetsOk)

MDD diplexer band edge not specified.


MDD Plant US Frequency Range = extended.
Requested Spectrum = US:(0 MHz..85 MHz) DS:(0 MHz..0 MHz)
Best Match = 0: US:(5 MHz..85 MHz) DS:(108 MHz..1218 MHz)
Switchable diplexer ECN support disabled. NOT switching diplexer.
[00:19:39 01/01/1970] [CmDocsisCtlThread]
BcmCmMdDsSgDiscState::TrimSgSetWithoutThisDcid:
1 candidate MD-DS-SG remain after TrimSgSetWithoutThisDcid( target_dcid )
for target_dcid=0x04 (4)
[00:19:39 01/01/1970] [CmDocsisCtlThread] BcmCmMdDsSgDiscState::StartMdDsSgDisc:
special case: one and only one MD-DS-SG contains mdd_dcid.
fMdDsSgId=0x1d (29)
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , M-d++a+i-+Ty-eA+dA++e|:
i_L-ca+A++e|A: 1
Chec+ +D_A++e|A
Cha++e+ Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1

MD-DS-SG discovery info:

fCmMdDsSgDiscState = 6 (kMdDsSgDiscDone)
fMdDsSgId = 0x1d (29)
fMdDsSgDiscovered = true

Trimmed Candidate Downstream Service Group Settings List: list size = 1

sgid size member dcid's


---- ---- -------------
29 34 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
27 28 29 30 31 32 159 160
Downstream Active Channel Settings List:

dcid type frequency prim capable rpt enable mod/annex or PLC params
---- -------- --------- ------------ ---------- -----------------------
1 SC-QAM 531000000 y 0x36 256QAM/AnnexA
2 SC-QAM 539000000 y 0x36 256QAM/AnnexA
3 SC-QAM 547000000 y 0x36 256QAM/AnnexA
4 SC-QAM 555000000 y 0x36 256QAM/AnnexA
5 SC-QAM 563000000 y 0x36 256QAM/AnnexA
6 SC-QAM 571000000 y 0x36 256QAM/AnnexA
7 SC-QAM 579000000 y 0x36 256QAM/AnnexA
8 SC-QAM 587000000 y 0x36 256QAM/AnnexA
9 SC-QAM 595000000 y 0x36 256QAM/AnnexA
10 SC-QAM 603000000 y 0x36 256QAM/AnnexA
11 SC-QAM 611000000 y 0x36 256QAM/AnnexA
12 SC-QAM 619000000 y 0x36 256QAM/AnnexA
13 SC-QAM 627000000 y 0x36 256QAM/AnnexA
14 SC-QAM 635000000 y 0x36 256QAM/AnnexA
15 SC-QAM 643000000 y 0x36 256QAM/AnnexA
16 SC-QAM 651000000 y 0x36 256QAM/AnnexA
17 SC-QAM 659000000 y 0x36 256QAM/AnnexA
18 SC-QAM 667000000 y 0x36 256QAM/AnnexA
19 SC-QAM 675000000 y 0x36 256QAM/AnnexA
20 SC-QAM 683000000 y 0x36 256QAM/AnnexA
21 SC-QAM 691000000 y 0x36 256QAM/AnnexA
22 SC-QAM 699000000 y 0x36 256QAM/AnnexA
23 SC-QAM 707000000 y 0x36 256QAM/AnnexA
24 SC-QAM 715000000 y 0x36 256QAM/AnnexA
25 SC-QAM 723000000 y 0x36 256QAM/AnnexA
26 SC-QAM 731000000 y 0x36 256QAM/AnnexA
27 SC-QAM 739000000 y 0x36 256QAM/AnnexA
28 SC-QAM 747000000 y 0x36 256QAM/AnnexA
29 SC-QAM 755000000 y 0x36 256QAM/AnnexA
30 SC-QAM 763000000 y 0x36 256QAM/AnnexA
31 SC-QAM 771000000 y 0x36 256QAM/AnnexA
32 SC-QAM 779000000 y 0x36 256QAM/AnnexA
159 OFDM PLC 897000000 n 0x36 25Khz/5us/0.625us
160 OFDM PLC 361000000 n 0x36 50Khz/0.9375us/0.625us

Trimmed Downstream Ambiguity Resolution Frequency List: list size = 3

531000000-sc_qam 539000000-sc_qam 547000000-sc_qam

visible dcid set = 4

freq with visible dcid set = 555000000

BcmCmDocsisCtlMsgACT::HandleEvent() @time=1180340 event_code=11


(kCmMdDsSgDiscDone)
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=true
[00:19:40 01/01/1970] [CmDocsisCtlThread]
BcmDocsisCmHalIf::SetPrimaryDownstreamChannel: (DOCSIS CableModem HalIf)
Installing primary downstream channel index: 0
SetRatios called with primary downstream channel number = 0
AnnexMode[0] = 1 QAM_Mode[0] = 256
Num/Den = 869/1280
3390 SCDMA/OFDM mode - ChannelNumber = 0 Numerator = 869 Denominator = 1280
CM/DocsisCtl> [00:19:40 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL failed to acquire sync or lost sync!
... TCOFDM - DTR is now locked.... (T2=150ms Sync=14)

Given a 216 MHz TCOFDM clock, the nominal value for the DTR FCW is 0xC22E45067
The DTR FCW is 0xc22e92ff - that value is good (6, within 100 ppm)
Kicked off the DPLL
LE Done bit was set
LE Done bit was set
SCQAM DS clock source.
PLL in Leaky mode.
PLL Fn = 6, k1 = 18, k2 = 19
[00:19:40 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context=1 (ErrorRecovery)
[00:19:40 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context is error recovery or startup.
Always use last good upstream target chan id=1
[00:19:40 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper) Locked on the downstream. Waiting for UCDs...
[00:19:40 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefFail: (Cm
Multi US Helper) target hwTxId=0
CM/DocsisCtl> [00:19:42 01/01/1970] [CmDocsisCtlThread]
BcmCmMultiUsHelper::TmUcdRxTimerEvent: (Cm Multi US Helper)
ucd gathering ok.

[00:19:42 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper) state at
entry:

Channel targeting:
Downstream:
fTargetDsFreqHz = 0 (0)
fCurrentDsFreqHz = 0x2114a0c0 (555000000)
fStoredDsFreqHz = 0x29020c00 (688000000)

Upstream:
fDestSingleTxTargetUsChanId = 0x1 (1)
fTargetingContext = 1 (ErrorRecovery)

Startup UCD Selection Info:

low priority candidate ucid list = 2 4 3 1 8 5 6 7


happy home ucid set = 1 2 3 4

Upstream Active Channel Settings:

ucid rpt enable sel prio MAP source dcid's


---- ---------- -------- -----------------
1 0x1c0 0
2 0x1c0 0
3 0x1c0 0
4 0x1c0 0
5 0x1c0 0
6 0x1c0 0
7 0x1c0 0
8 0x1c0 0

BcmCmUsTargetMset (a.k.a. usable UCDs gathered during startup):

us config
phy change ranging scdma
type ucid dcid count tried? enabled?
---- ---- ---- ------ ------- --------
3 1 4 4 n n
3 2 4 4 n n
3 3 4 4 n n
3 4 4 4 n n
3 5 4 4 n n
3 6 4 4 n n
3 7 4 4 n n
3 8 4 4 n n

[00:19:42 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper)
starting docs3 upstream initialization on target ucid=2
with upstream phy type 3 on hardware transmitter index 0

[00:19:42 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::ExecuteTccCmd: hwTxId=0


docs ucid=0
[00:19:42 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0
[00:19:42 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::InstallUsSets: Installing
UCD w/ucid for UCID=2 for CM hardware tx chan 0

[00:19:42 01/01/1970] [CmDocsisCtlThread]


BcmCmUsSetsState::TestAndLaunchUsTimeSync: starting upstream time sync
acquisition...
[00:19:42 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefOk: (Cm
Multi US Helper) target hwTxId=0
[00:19:42 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::UsTimeRefOk: upstream time
sync acquired for fHwTxId=0

== Beginning initial ranging for Docsis UCID 2 ==


Minimum transmit power is 17 dBmV
Maximum transmit power is 53 dBmV
Stored power level for UCID 2 is 38 dBmV
Using per transmitter stored initial upstream power = 38 dBmV hwTxId = 0 docsis
UCID = 2
RNG-RSP UsChanId=2 Adj: tim=1884 freq=-29 Stat=Continue (CmdPwr (UsChanId-dBmV):
(2-41.00) )
[00:19:43 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0xc9
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (2-
41.00) )
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (2-
41.00) )
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (2-
41.00) )
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (2-
41.00) )
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Success (CmdPwr (UsChanId-dBmV): (2-
41.00) )
[00:19:48 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::FirstRngSuccess:
(CmDocsisCtlThread)
first RNG-RSP w/status==SUCCESS for hwTxId=0 and DOCSIS ucid=2
[00:19:48 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::LaunchEaeBpkm:
(CmDocsisCtlThread) BPKM enabled. starting Early Authentication and Encryption BPKM
key requests. Primary Sid = 201
CM/DocsisCtl> Bandwidth request failure! Status = 0

BcmCmUsChanTimerMuxACT::HandleEvent() @time=1378550 fTimerType=5


(kT4NoStationMaint) hwTxId=0 docs ucid=2
[00:22:58 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::T4NoStationMaintEvent: ERROR - no Station Maint map op error.
hwTxId=0 docs ucid=2
[00:22:58 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::CommonRngErrorHandler: reason=10 (T4NoStationMaintTimeout)
hwTxId=0 docs ucid=2
[00:22:58 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) Purging DS
frequency 555000000 from current scan pass due to pre-registration restart error
[00:22:58 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) reinit MAC #6:
T4NoStationMaintTimeout

[00:22:58 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::Reset:


(CmDocsisCtlThread) DefaultSnmpAgentClass::RestartPendingEvent for Vendor CM
Agent w/ BRCM Factory Support
Logging event: Received Response to Broadcast Maintenance Request, But no Unicast
Maintenance opportunities received - T4 time out;CM-MAC=fc:4a:e9:de:ad:88;CMTS-
MAC=28:52:61:fa:d8:78;CM-QOS=1.1;CM-VER=3.1;
Vendor CM Agent w/ BRCM Factory Support updating ifTableLastChange.
Vendor CM Agent w/ BRCM Factory Support resetting to default state.
Vendor CM Agent w/ BRCM Factory Support destroying users...
Vendor CM Agent w/ BRCM Factory Support destroying notifies...
Vendor CM Agent w/ BRCM Factory Support destroying views...
Allowing DOCS-CABLE-DEVICE-MIB IP filters.
Vendor CM Agent w/ BRCM Factory Support deferring traps.
Received RG Event 0x80000001 State 0x1
eRouter Linux WAN Down
[00:22:58 01/01/1970] [eRouterMsgPipe] eRouterMsgPipe::UpdateIpNetToMediaEntry:
(eRouterMsgPipe) eRouter IP address:0.0.0.0
00:22:58.840 01/01/1970 (CALC) mtaCmStatusInfo() - MTA is Signaled: *NOT-
OPERATIONAL* (Stat=0x1) emtaCurState = 0.
EmtaSnmpAgent::SoftReset
Pausing trap thread
emta factory agentResetting to default state.
emta factory agent destroying users...
emta factory agent destroying notifies...
emta factory agent destroying views...
emta factory agent entering RFC-2576 Coexistence security mode.
emta factory agent entering Basic/Hybrid flow provisioning mode.
Resuming trap thread
Stopping DHCP/ToD/TFTP (client requested)...
[00:22:58 01/01/1970] [CmDocsisIpThread] BcmEcosIpHalIf::RemoveIpv6Address: (IP
Stack1 HalIf) ERROR - Failed to remove IPv6 address fe80::fe4a:e9ff:fede:ad88/64
from the stack!
[00:22:58 01/01/1970] [CmDocsisIpThread] BcmDhcpV6ClientIf::ReleaseAddresses:
(DHCPv6 ClientIf for IP Stack1) ERROR - IA state is initial; there is no address to
release.
BcmDocsis3DsMacEnableMulticastDsidForwarding 0; primary DS = 0
SCQAM DSID filter control = 0x00
OFDM DSID filter control = 0x01
Deleting DOCSIS 1.0 CoS Settings for SID 0xc9
[00:22:59 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows:
(DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along
with associated Classifiers and PHS rules...
[00:22:59 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState:
(CmDocsisCtlThread)
[00:22:59 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Primary SID for usHwChannel 0 to 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 1
Updating US chan 8 data Profile test msg for Sid: 0x0.
Updating US chan 9 data Profile test msg for Sid: 0x0.
CM/DocsisCtl> [00:22:59 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL declared PULSE lost!
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=false
[00:23:00 01/01/1970] [CmDocsisCtlThread] BcmCmMultiDsHelper::PreRegDsChanChange:
target freq hz = 0
reason string = ErrorRecovery
CmInitReason = 16

Starting DS scanning...
[00:23:00 01/01/1970] [CmDocsisCtlThread] BcmCmDownstreamScan::StartScan: Starting
DS scan
Checking for cable cut...

CM/DocsisCtl> Plant power is 15.35

Cable connected

CM/DocsisCtl> Scanning 556.000 MHz SC-QAM (Annex A(Eu.1M))


Scanning 557.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 558.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 559.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 560.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 561.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 562.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 563.000 MHz SC-QAM (Annex A(Eu.1M)) locked SC-QAM
[00:23:03 01/01/1970] [CmDocsisCtlThread] BcmCmDsChan::DsLockOk: (BcmCmDsChan 0)
hwRxId=0 freq=0 dcid=0

******************************************
DOWNSTREAM STATUS
******************************************
HW Channel ID = 0
Phy type: SC-QAM
DS active chan settings:
ds chan id = 0
center freq, Hz = 563000000 Hz
primary capable = false
status event rpt bitmask = 0

CM HW Detected DS Phy Settings:


Center Freq, Hz = 563000000
QAM = Locked
FEC = Locked
Carrier Freq Offset, kHz = 0
Channel Width, Hz = 8000000
Modulation = Qam256
Interleaver = Taps12Incr17
Symbol Rate, sym/sec = 6952000

******************************************

[00:23:03 01/01/1970] [CmDocsisCtlThread]


BcmCmMacDomainSetsState::StartDsMacMddInit:
**********************************************
Waiting for MDDs...
**********************************************

CM/DocsisCtl>
BcmCmDocsisCtlMsgACT::HandleEvent() @time=1383750 event_code=4 (kCmPriDsMddSetsOk)

MDD diplexer band edge not specified.


MDD Plant US Frequency Range = extended.
Requested Spectrum = US:(0 MHz..85 MHz) DS:(0 MHz..0 MHz)
Best Match = 0: US:(5 MHz..85 MHz) DS:(108 MHz..1218 MHz)
Switchable diplexer ECN support disabled. NOT switching diplexer.
[00:23:03 01/01/1970] [CmDocsisCtlThread]
BcmCmMdDsSgDiscState::TrimSgSetWithoutThisDcid:
1 candidate MD-DS-SG remain after TrimSgSetWithoutThisDcid( target_dcid )
for target_dcid=0x05 (5)
[00:23:03 01/01/1970] [CmDocsisCtlThread] BcmCmMdDsSgDiscState::StartMdDsSgDisc:
special case: one and only one MD-DS-SG contains mdd_dcid.
fMdDsSgId=0x1d (29)
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , M-d++a+i-+Ty-eA+dA++e|:
i_L-ca+A++e|A: 1
Chec+ +D_A++e|A
Cha++e+ Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1

MD-DS-SG discovery info:

fCmMdDsSgDiscState = 6 (kMdDsSgDiscDone)
fMdDsSgId = 0x1d (29)
fMdDsSgDiscovered = true

Trimmed Candidate Downstream Service Group Settings List: list size = 1

sgid size member dcid's


---- ---- -------------
29 34 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
27 28 29 30 31 32 159 160

Downstream Active Channel Settings List:

dcid type frequency prim capable rpt enable mod/annex or PLC params
---- -------- --------- ------------ ---------- -----------------------
1 SC-QAM 531000000 y 0x36 256QAM/AnnexA
2 SC-QAM 539000000 y 0x36 256QAM/AnnexA
3 SC-QAM 547000000 y 0x36 256QAM/AnnexA
4 SC-QAM 555000000 y 0x36 256QAM/AnnexA
5 SC-QAM 563000000 y 0x36 256QAM/AnnexA
6 SC-QAM 571000000 y 0x36 256QAM/AnnexA
7 SC-QAM 579000000 y 0x36 256QAM/AnnexA
8 SC-QAM 587000000 y 0x36 256QAM/AnnexA
9 SC-QAM 595000000 y 0x36 256QAM/AnnexA
10 SC-QAM 603000000 y 0x36 256QAM/AnnexA
11 SC-QAM 611000000 y 0x36 256QAM/AnnexA
12 SC-QAM 619000000 y 0x36 256QAM/AnnexA
13 SC-QAM 627000000 y 0x36 256QAM/AnnexA
14 SC-QAM 635000000 y 0x36 256QAM/AnnexA
15 SC-QAM 643000000 y 0x36 256QAM/AnnexA
16 SC-QAM 651000000 y 0x36 256QAM/AnnexA
17 SC-QAM 659000000 y 0x36 256QAM/AnnexA
18 SC-QAM 667000000 y 0x36 256QAM/AnnexA
19 SC-QAM 675000000 y 0x36 256QAM/AnnexA
20 SC-QAM 683000000 y 0x36 256QAM/AnnexA
21 SC-QAM 691000000 y 0x36 256QAM/AnnexA
22 SC-QAM 699000000 y 0x36 256QAM/AnnexA
23 SC-QAM 707000000 y 0x36 256QAM/AnnexA
24 SC-QAM 715000000 y 0x36 256QAM/AnnexA
25 SC-QAM 723000000 y 0x36 256QAM/AnnexA
26 SC-QAM 731000000 y 0x36 256QAM/AnnexA
27 SC-QAM 739000000 y 0x36 256QAM/AnnexA
28 SC-QAM 747000000 y 0x36 256QAM/AnnexA
29 SC-QAM 755000000 y 0x36 256QAM/AnnexA
30 SC-QAM 763000000 y 0x36 256QAM/AnnexA
31 SC-QAM 771000000 y 0x36 256QAM/AnnexA
32 SC-QAM 779000000 y 0x36 256QAM/AnnexA
159 OFDM PLC 897000000 n 0x36 25Khz/5us/0.625us
160 OFDM PLC 361000000 n 0x36 50Khz/0.9375us/0.625us

Trimmed Downstream Ambiguity Resolution Frequency List: list size = 3

531000000-sc_qam 539000000-sc_qam 547000000-sc_qam

visible dcid set = 5

freq with visible dcid set = 563000000

BcmCmDocsisCtlMsgACT::HandleEvent() @time=1384340 event_code=11


(kCmMdDsSgDiscDone)
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=true
[00:23:04 01/01/1970] [CmDocsisCtlThread]
BcmDocsisCmHalIf::SetPrimaryDownstreamChannel: (DOCSIS CableModem HalIf)
Installing primary downstream channel index: 0
SetRatios called with primary downstream channel number = 0
AnnexMode[0] = 1 QAM_Mode[0] = 256
Num/Den = 869/1280
3390 SCDMA/OFDM mode - ChannelNumber = 0 Numerator = 869 Denominator = 1280
CM/DocsisCtl> [00:23:04 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL failed to acquire sync or lost sync!
... TCOFDM - DTR is now locked.... (T2=150ms Sync=14)

Given a 216 MHz TCOFDM clock, the nominal value for the DTR FCW is 0xC22E45067
The DTR FCW is 0xc22e93a9 - that value is good (6, within 100 ppm)
Kicked off the DPLL
LE Done bit was set
LE Done bit was set
SCQAM DS clock source.
PLL in Leaky mode.
PLL Fn = 6, k1 = 18, k2 = 19
[00:23:04 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context=1 (ErrorRecovery)
[00:23:04 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context is error recovery or startup.
Always use last good upstream target chan id=1
[00:23:04 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper) Locked on the downstream. Waiting for UCDs...
[00:23:04 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefFail: (Cm
Multi US Helper) target hwTxId=0
CM/DocsisCtl> [00:23:06 01/01/1970] [CmDocsisCtlThread]
BcmCmMultiUsHelper::TmUcdRxTimerEvent: (Cm Multi US Helper)
ucd gathering ok.

[00:23:06 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper) state at
entry:

Channel targeting:
Downstream:
fTargetDsFreqHz = 0 (0)
fCurrentDsFreqHz = 0x218eb2c0 (563000000)
fStoredDsFreqHz = 0x29020c00 (688000000)

Upstream:
fDestSingleTxTargetUsChanId = 0x1 (1)
fTargetingContext = 1 (ErrorRecovery)

Startup UCD Selection Info:

low priority candidate ucid list = 2 1 4 3 6 5 8 7


happy home ucid set = 1 2 3 4

Upstream Active Channel Settings:

ucid rpt enable sel prio MAP source dcid's


---- ---------- -------- -----------------
1 0x1c0 0
2 0x1c0 0
3 0x1c0 0
4 0x1c0 0
5 0x1c0 0
6 0x1c0 0
7 0x1c0 0
8 0x1c0 0

BcmCmUsTargetMset (a.k.a. usable UCDs gathered during startup):

us config
phy change ranging scdma
type ucid dcid count tried? enabled?
---- ---- ---- ------ ------- --------
3 1 5 4 n n
3 2 5 4 n n
3 3 5 4 n n
3 4 5 4 n n
3 5 5 4 n n
3 6 5 4 n n
3 7 5 4 n n
3 8 5 4 n n

[00:23:06 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper)
starting docs3 upstream initialization on target ucid=2
with upstream phy type 3 on hardware transmitter index 0
[00:23:06 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::ExecuteTccCmd: hwTxId=0
docs ucid=0
[00:23:06 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0
[00:23:06 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::InstallUsSets: Installing
UCD w/ucid for UCID=2 for CM hardware tx chan 0

[00:23:06 01/01/1970] [CmDocsisCtlThread]


BcmCmUsSetsState::TestAndLaunchUsTimeSync: starting upstream time sync
acquisition...
[00:23:06 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefOk: (Cm
Multi US Helper) target hwTxId=0
[00:23:06 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::UsTimeRefOk: upstream time
sync acquired for fHwTxId=0

== Beginning initial ranging for Docsis UCID 2 ==


Minimum transmit power is 17 dBmV
Maximum transmit power is 53 dBmV
Stored power level for UCID 2 is 38 dBmV
Using per transmitter stored initial upstream power = 38 dBmV hwTxId = 0 docsis
UCID = 2
RNG-RSP UsChanId=2 Adj: tim=1953 freq=29 Stat=Continue (CmdPwr (UsChanId-dBmV):
(2-41.00) )
[00:23:07 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0xc9
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (2-
41.00) )
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (2-
41.00) )
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (2-
41.00) )
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (2-
41.00) )
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Success (CmdPwr (UsChanId-dBmV): (2-
41.00) )
[00:23:12 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::FirstRngSuccess:
(CmDocsisCtlThread)
first RNG-RSP w/status==SUCCESS for hwTxId=0 and DOCSIS ucid=2
[00:23:12 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::LaunchEaeBpkm:
(CmDocsisCtlThread) BPKM enabled. starting Early Authentication and Encryption BPKM
key requests. Primary Sid = 201
CM/DocsisCtl> Bandwidth request failure! Status = 0

BcmCmUsChanTimerMuxACT::HandleEvent() @time=1582330 fTimerType=5


(kT4NoStationMaint) hwTxId=0 docs ucid=2
[00:26:22 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::T4NoStationMaintEvent: ERROR - no Station Maint map op error.
hwTxId=0 docs ucid=2
[00:26:22 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::CommonRngErrorHandler: reason=10 (T4NoStationMaintTimeout)
hwTxId=0 docs ucid=2
[00:26:22 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) Purging DS
frequency 563000000 from current scan pass due to pre-registration restart error
[00:26:22 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) reinit MAC #7:
T4NoStationMaintTimeout
[00:26:22 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::Reset:
(CmDocsisCtlThread) DefaultSnmpAgentClass::RestartPendingEvent for Vendor CM
Agent w/ BRCM Factory Support
Logging event: Received Response to Broadcast Maintenance Request, But no Unicast
Maintenance opportunities received - T4 time out;CM-MAC=fc:4a:e9:de:ad:88;CMTS-
MAC=28:52:61:fa:d8:78;CM-QOS=1.1;CM-VER=3.1;
Vendor CM Agent w/ BRCM Factory Support updating ifTableLastChange.
Vendor CM Agent w/ BRCM Factory Support resetting to default state.
Vendor CM Agent w/ BRCM Factory Support destroying users...
Vendor CM Agent w/ BRCM Factory Support destroying notifies...
Vendor CM Agent w/ BRCM Factory Support destroying views...
Allowing DOCS-CABLE-DEVICE-MIB IP filters.
Vendor CM Agent w/ BRCM Factory Support deferring traps.
Received RG Event 0x80000001 State 0x1
eRouter Linux WAN Down
[00:26:22 01/01/1970] [eRouterMsgPipe] eRouterMsgPipe::UpdateIpNetToMediaEntry:
(eRouterMsgPipe) eRouter IP address:0.0.0.0
00:26:22.620 01/01/1970 (CALC) mtaCmStatusInfo() - MTA is Signaled: *NOT-
OPERATIONAL* (Stat=0x1) emtaCurState = 0.
EmtaSnmpAgent::SoftReset
Pausing trap thread
emta factory agentResetting to default state.
emta factory agent destroying users...
emta factory agent destroying notifies...
emta factory agent destroying views...
emta factory agent entering RFC-2576 Coexistence security mode.
emta factory agent entering Basic/Hybrid flow provisioning mode.
Resuming trap thread
Stopping DHCP/ToD/TFTP (client requested)...
[00:26:22 01/01/1970] [CmDocsisIpThread] BcmEcosIpHalIf::RemoveIpv6Address: (IP
Stack1 HalIf) ERROR - Failed to remove IPv6 address fe80::fe4a:e9ff:fede:ad88/64
from the stack!
[00:26:22 01/01/1970] [CmDocsisIpThread] BcmDhcpV6ClientIf::ReleaseAddresses:
(DHCPv6 ClientIf for IP Stack1) ERROR - IA state is initial; there is no address to
release.
BcmDocsis3DsMacEnableMulticastDsidForwarding 0; primary DS = 0
SCQAM DSID filter control = 0x00
OFDM DSID filter control = 0x01
Deleting DOCSIS 1.0 CoS Settings for SID 0xc9
[00:26:22 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows:
(DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along
with associated Classifiers and PHS rules...
[00:26:23 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState:
(CmDocsisCtlThread)
[00:26:23 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Primary SID for usHwChannel 0 to 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 1
Updating US chan 8 data Profile test msg for Sid: 0x0.
Updating US chan 9 data Profile test msg for Sid: 0x0.
CM/DocsisCtl> [00:26:23 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL declared PULSE lost!
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=false
[00:26:23 01/01/1970] [CmDocsisCtlThread] BcmCmMultiDsHelper::PreRegDsChanChange:
target freq hz = 0
reason string = ErrorRecovery
CmInitReason = 16
Starting DS scanning...
[00:26:23 01/01/1970] [CmDocsisCtlThread] BcmCmDownstreamScan::StartScan: Starting
DS scan
Checking for cable cut...

CM/DocsisCtl> Plant power is 15.35

Cable connected

CM/DocsisCtl> Scanning 564.000 MHz SC-QAM (Annex A(Eu.1M))


Scanning 565.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 566.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 567.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 568.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 569.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 570.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 571.000 MHz SC-QAM (Annex A(Eu.1M)) locked SC-QAM
[00:26:26 01/01/1970] [CmDocsisCtlThread] BcmCmDsChan::DsLockOk: (BcmCmDsChan 0)
hwRxId=0 freq=0 dcid=0

******************************************
DOWNSTREAM STATUS
******************************************
HW Channel ID = 0
Phy type: SC-QAM
DS active chan settings:
ds chan id = 0
center freq, Hz = 571000000 Hz
primary capable = false
status event rpt bitmask = 0

CM HW Detected DS Phy Settings:


Center Freq, Hz = 571000000
QAM = Locked
FEC = Locked
Carrier Freq Offset, kHz = 0
Channel Width, Hz = 8000000
Modulation = Qam256
Interleaver = Taps12Incr17
Symbol Rate, sym/sec = 6952000

******************************************

[00:26:26 01/01/1970] [CmDocsisCtlThread]


BcmCmMacDomainSetsState::StartDsMacMddInit:
**********************************************
Waiting for MDDs...
**********************************************

CM/DocsisCtl>
BcmCmDocsisCtlMsgACT::HandleEvent() @time=1587750 event_code=4 (kCmPriDsMddSetsOk)

MDD diplexer band edge not specified.


MDD Plant US Frequency Range = extended.
Requested Spectrum = US:(0 MHz..85 MHz) DS:(0 MHz..0 MHz)
Best Match = 0: US:(5 MHz..85 MHz) DS:(108 MHz..1218 MHz)
Switchable diplexer ECN support disabled. NOT switching diplexer.
[00:26:27 01/01/1970] [CmDocsisCtlThread]
BcmCmMdDsSgDiscState::TrimSgSetWithoutThisDcid:
1 candidate MD-DS-SG remain after TrimSgSetWithoutThisDcid( target_dcid )
for target_dcid=0x06 (6)
[00:26:27 01/01/1970] [CmDocsisCtlThread] BcmCmMdDsSgDiscState::StartMdDsSgDisc:
special case: one and only one MD-DS-SG contains mdd_dcid.
fMdDsSgId=0x1d (29)
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , M-d++a+i-+Ty-eA+dA++e|:
i_L-ca+A++e|A: 1
Chec+ +D_A++e|A
Cha++e+ Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1

MD-DS-SG discovery info:

fCmMdDsSgDiscState = 6 (kMdDsSgDiscDone)
fMdDsSgId = 0x1d (29)
fMdDsSgDiscovered = true
Trimmed Candidate Downstream Service Group Settings List: list size = 1

sgid size member dcid's


---- ---- -------------
29 34 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
27 28 29 30 31 32 159 160

Downstream Active Channel Settings List:

dcid type frequency prim capable rpt enable mod/annex or PLC params
---- -------- --------- ------------ ---------- -----------------------
1 SC-QAM 531000000 y 0x36 256QAM/AnnexA
2 SC-QAM 539000000 y 0x36 256QAM/AnnexA
3 SC-QAM 547000000 y 0x36 256QAM/AnnexA
4 SC-QAM 555000000 y 0x36 256QAM/AnnexA
5 SC-QAM 563000000 y 0x36 256QAM/AnnexA
6 SC-QAM 571000000 y 0x36 256QAM/AnnexA
7 SC-QAM 579000000 y 0x36 256QAM/AnnexA
8 SC-QAM 587000000 y 0x36 256QAM/AnnexA
9 SC-QAM 595000000 y 0x36 256QAM/AnnexA
10 SC-QAM 603000000 y 0x36 256QAM/AnnexA
11 SC-QAM 611000000 y 0x36 256QAM/AnnexA
12 SC-QAM 619000000 y 0x36 256QAM/AnnexA
13 SC-QAM 627000000 y 0x36 256QAM/AnnexA
14 SC-QAM 635000000 y 0x36 256QAM/AnnexA
15 SC-QAM 643000000 y 0x36 256QAM/AnnexA
16 SC-QAM 651000000 y 0x36 256QAM/AnnexA
17 SC-QAM 659000000 y 0x36 256QAM/AnnexA
18 SC-QAM 667000000 y 0x36 256QAM/AnnexA
19 SC-QAM 675000000 y 0x36 256QAM/AnnexA
20 SC-QAM 683000000 y 0x36 256QAM/AnnexA
21 SC-QAM 691000000 y 0x36 256QAM/AnnexA
22 SC-QAM 699000000 y 0x36 256QAM/AnnexA
23 SC-QAM 707000000 y 0x36 256QAM/AnnexA
24 SC-QAM 715000000 y 0x36 256QAM/AnnexA
25 SC-QAM 723000000 y 0x36 256QAM/AnnexA
26 SC-QAM 731000000 y 0x36 256QAM/AnnexA
27 SC-QAM 739000000 y 0x36 256QAM/AnnexA
28 SC-QAM 747000000 y 0x36 256QAM/AnnexA
29 SC-QAM 755000000 y 0x36 256QAM/AnnexA
30 SC-QAM 763000000 y 0x36 256QAM/AnnexA
31 SC-QAM 771000000 y 0x36 256QAM/AnnexA
32 SC-QAM 779000000 y 0x36 256QAM/AnnexA
159 OFDM PLC 897000000 n 0x36 25Khz/5us/0.625us
160 OFDM PLC 361000000 n 0x36 50Khz/0.9375us/0.625us

Trimmed Downstream Ambiguity Resolution Frequency List: list size = 3

531000000-sc_qam 539000000-sc_qam 547000000-sc_qam

visible dcid set = 6

freq with visible dcid set = 571000000

BcmCmDocsisCtlMsgACT::HandleEvent() @time=1588340 event_code=11


(kCmMdDsSgDiscDone)
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=true
[00:26:28 01/01/1970] [CmDocsisCtlThread]
BcmDocsisCmHalIf::SetPrimaryDownstreamChannel: (DOCSIS CableModem HalIf)
Installing primary downstream channel index: 0
SetRatios called with primary downstream channel number = 0
AnnexMode[0] = 1 QAM_Mode[0] = 256
Num/Den = 869/1280
3390 SCDMA/OFDM mode - ChannelNumber = 0 Numerator = 869 Denominator = 1280
CM/DocsisCtl> [00:26:28 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL failed to acquire sync or lost sync!
... TCOFDM - DTR is now locked.... (T2=150ms Sync=14)

Given a 216 MHz TCOFDM clock, the nominal value for the DTR FCW is 0xC22E45067
The DTR FCW is 0xc22e901f - that value is good (5, within 100 ppm)
Kicked off the DPLL
LE Done bit was set
LE Done bit was set
SCQAM DS clock source.
PLL in Leaky mode.
PLL Fn = 6, k1 = 18, k2 = 19
[00:26:28 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context=1 (ErrorRecovery)
[00:26:28 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context is error recovery or startup.
Always use last good upstream target chan id=1
[00:26:28 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper) Locked on the downstream. Waiting for UCDs...
[00:26:28 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefFail: (Cm
Multi US Helper) target hwTxId=0
CM/DocsisCtl> [00:26:30 01/01/1970] [CmDocsisCtlThread]
BcmCmMultiUsHelper::TmUcdRxTimerEvent: (Cm Multi US Helper)
ucd gathering ok.

[00:26:30 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper) state at
entry:

Channel targeting:
Downstream:
fTargetDsFreqHz = 0 (0)
fCurrentDsFreqHz = 0x2208c4c0 (571000000)
fStoredDsFreqHz = 0x29020c00 (688000000)

Upstream:
fDestSingleTxTargetUsChanId = 0x1 (1)
fTargetingContext = 1 (ErrorRecovery)

Startup UCD Selection Info:

low priority candidate ucid list = 4 1 2 3 6 8 7 5


happy home ucid set = 1 2 3 4

Upstream Active Channel Settings:


ucid rpt enable sel prio MAP source dcid's
---- ---------- -------- -----------------
1 0x1c0 0
2 0x1c0 0
3 0x1c0 0
4 0x1c0 0
5 0x1c0 0
6 0x1c0 0
7 0x1c0 0
8 0x1c0 0

BcmCmUsTargetMset (a.k.a. usable UCDs gathered during startup):

us config
phy change ranging scdma
type ucid dcid count tried? enabled?
---- ---- ---- ------ ------- --------
3 1 6 4 n n
3 2 6 4 n n
3 3 6 4 n n
3 4 6 4 n n
3 5 6 4 n n
3 6 6 4 n n
3 7 6 4 n n
3 8 6 4 n n

[00:26:30 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper)
starting docs3 upstream initialization on target ucid=4
with upstream phy type 3 on hardware transmitter index 0

[00:26:30 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::ExecuteTccCmd: hwTxId=0


docs ucid=0
[00:26:30 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0
[00:26:30 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::InstallUsSets: Installing
UCD w/ucid for UCID=4 for CM hardware tx chan 0

[00:26:30 01/01/1970] [CmDocsisCtlThread]


BcmCmUsSetsState::TestAndLaunchUsTimeSync: starting upstream time sync
acquisition...
[00:26:30 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefOk: (Cm
Multi US Helper) target hwTxId=0
[00:26:30 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::UsTimeRefOk: upstream time
sync acquired for fHwTxId=0

== Beginning initial ranging for Docsis UCID 4 ==


Minimum transmit power is 17 dBmV
Maximum transmit power is 53 dBmV
Stored power level for UCID 4 is 42 dBmV
Using per transmitter stored initial upstream power = 42 dBmV hwTxId = 0 docsis
UCID = 4
RNG-RSP UsChanId=4 Adj: tim=1975 freq=43 Stat=Continue (CmdPwr (UsChanId-dBmV):
(4-42.25) )
[00:26:31 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0xc9
RNG-RSP UsChanId=4 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (4-
41.75) )
RNG-RSP UsChanId=4 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (4-
41.75) )
RNG-RSP UsChanId=4 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (4-
41.75) )
RNG-RSP UsChanId=4 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (4-
41.75) )
RNG-RSP UsChanId=4 Adj: tim=0 freq=0 Stat=Success (CmdPwr (UsChanId-dBmV): (4-
41.75) )
[00:26:37 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::FirstRngSuccess:
(CmDocsisCtlThread)
first RNG-RSP w/status==SUCCESS for hwTxId=0 and DOCSIS ucid=4
[00:26:37 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::LaunchEaeBpkm:
(CmDocsisCtlThread) BPKM enabled. starting Early Authentication and Encryption BPKM
key requests. Primary Sid = 201
CM/DocsisCtl> Bandwidth request failure! Status = 0

BcmCmUsChanTimerMuxACT::HandleEvent() @time=1786610 fTimerType=5


(kT4NoStationMaint) hwTxId=0 docs ucid=4
[00:29:46 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::T4NoStationMaintEvent: ERROR - no Station Maint map op error.
hwTxId=0 docs ucid=4
[00:29:46 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::CommonRngErrorHandler: reason=10 (T4NoStationMaintTimeout)
hwTxId=0 docs ucid=4
[00:29:46 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) Purging DS
frequency 571000000 from current scan pass due to pre-registration restart error
[00:29:46 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) reinit MAC #8:
T4NoStationMaintTimeout

[00:29:46 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::Reset:


(CmDocsisCtlThread) DefaultSnmpAgentClass::RestartPendingEvent for Vendor CM
Agent w/ BRCM Factory Support
Logging event: Received Response to Broadcast Maintenance Request, But no Unicast
Maintenance opportunities received - T4 time out;CM-MAC=fc:4a:e9:de:ad:88;CMTS-
MAC=28:52:61:fa:d8:78;CM-QOS=1.1;CM-VER=3.1;
Vendor CM Agent w/ BRCM Factory Support updating ifTableLastChange.
Vendor CM Agent w/ BRCM Factory Support resetting to default state.
Vendor CM Agent w/ BRCM Factory Support destroying users...
Vendor CM Agent w/ BRCM Factory Support destroying notifies...
Vendor CM Agent w/ BRCM Factory Support destroying views...
Allowing DOCS-CABLE-DEVICE-MIB IP filters.
Vendor CM Agent w/ BRCM Factory Support deferring traps.
CM/DocsisCtl> Received RG Event 0x80000001 State 0x1
eRouter Linux WAN Down
[00:29:46 01/01/1970] [eRouterMsgPipe] eRouterMsgPipe::UpdateIpNetToMediaEntry:
(eRouterMsgPipe) eRouter IP address:0.0.0.0
00:29:46.900 01/01/1970 (CALC) mtaCmStatusInfo() - MTA is Signaled: *NOT-
OPERATIONAL* (Stat=0x1) emtaCurState = 0.
EmtaSnmpAgent::SoftReset
Pausing trap thread
emta factory agentResetting to default state.
emta factory agent destroying users...
emta factory agent destroying notifies...
emta factory agent destroying views...
emta factory agent entering RFC-2576 Coexistence security mode.
emta factory agent entering Basic/Hybrid flow provisioning mode.
Resuming trap thread
Stopping DHCP/ToD/TFTP (client requested)...
[00:29:46 01/01/1970] [CmDocsisIpThread] BcmEcosIpHalIf::RemoveIpv6Address: (IP
Stack1 HalIf) ERROR - Failed to remove IPv6 address fe80::fe4a:e9ff:fede:ad88/64
from the stack!
[00:29:46 01/01/1970] [CmDocsisIpThread] BcmDhcpV6ClientIf::ReleaseAddresses:
(DHCPv6 ClientIf for IP Stack1) ERROR - IA state is initial; there is no address to
release.
BcmDocsis3DsMacEnableMulticastDsidForwarding 0; primary DS = 0
SCQAM DSID filter control = 0x00
OFDM DSID filter control = 0x01
CM/DocsisCtl> Deleting DOCSIS 1.0 CoS Settings for SID 0xc9
[00:29:47 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows:
(DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along
with associated Classifiers and PHS rules...
[00:29:47 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState:
(CmDocsisCtlThread)
[00:29:47 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Primary SID for usHwChannel 0 to 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 1
Updating US chan 8 data Profile test msg for Sid: 0x0.
Updating US chan 9 data Profile test msg for Sid: 0x0.
CM/DocsisCtl> [00:29:47 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL declared PULSE lost!
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=false
[00:29:48 01/01/1970] [CmDocsisCtlThread] BcmCmMultiDsHelper::PreRegDsChanChange:
target freq hz = 0
reason string = ErrorRecovery
CmInitReason = 16

Starting DS scanning...
[00:29:48 01/01/1970] [CmDocsisCtlThread] BcmCmDownstreamScan::StartScan: Starting
DS scan
Checking for cable cut...

CM/DocsisCtl> Plant power is 15.35

Cable connected

CM/DocsisCtl> Scanning 572.000 MHz SC-QAM (Annex A(Eu.1M))


Scanning 573.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 574.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 575.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 576.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 577.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 578.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 579.000 MHz SC-QAM (Annex A(Eu.1M)) locked SC-QAM
[00:29:51 01/01/1970] [CmDocsisCtlThread] BcmCmDsChan::DsLockOk: (BcmCmDsChan 0)
hwRxId=0 freq=0 dcid=0

******************************************
DOWNSTREAM STATUS
******************************************
HW Channel ID = 0
Phy type: SC-QAM
DS active chan settings:
ds chan id = 0
center freq, Hz = 579000000 Hz
primary capable = false
status event rpt bitmask = 0

CM HW Detected DS Phy Settings:


Center Freq, Hz = 579000000
QAM = Locked
FEC = Locked
Carrier Freq Offset, kHz = 0
Channel Width, Hz = 8000000
Modulation = Qam256
Interleaver = Taps12Incr17
Symbol Rate, sym/sec = 6952000

******************************************

[00:29:51 01/01/1970] [CmDocsisCtlThread]


BcmCmMacDomainSetsState::StartDsMacMddInit:
**********************************************
Waiting for MDDs...
**********************************************

BcmCmDocsisCtlMsgACT::HandleEvent() @time=1791750 event_code=4 (kCmPriDsMddSetsOk)

MDD diplexer band edge not specified.


MDD Plant US Frequency Range = extended.
Requested Spectrum = US:(0 MHz..85 MHz) DS:(0 MHz..0 MHz)
Best Match = 0: US:(5 MHz..85 MHz) DS:(108 MHz..1218 MHz)
Switchable diplexer ECN support disabled. NOT switching diplexer.
[00:29:51 01/01/1970] [CmDocsisCtlThread]
BcmCmMdDsSgDiscState::TrimSgSetWithoutThisDcid:
1 candidate MD-DS-SG remain after TrimSgSetWithoutThisDcid( target_dcid )
for target_dcid=0x07 (7)
[00:29:51 01/01/1970] [CmDocsisCtlThread] BcmCmMdDsSgDiscState::StartMdDsSgDisc:
special case: one and only one MD-DS-SG contains mdd_dcid.
fMdDsSgId=0x1d (29)
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , M-d++a+i-+Ty-eA+dA++e|:
i_L-ca+A++e|A: 1
Chec+ +D_A++e|A
Cha++e+ Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1

MD-DS-SG discovery info:

fCmMdDsSgDiscState = 6 (kMdDsSgDiscDone)
fMdDsSgId = 0x1d (29)
fMdDsSgDiscovered = true

Trimmed Candidate Downstream Service Group Settings List: list size = 1

sgid size member dcid's


---- ---- -------------
29 34 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
27 28 29 30 31 32 159 160

Downstream Active Channel Settings List:

dcid type frequency prim capable rpt enable mod/annex or PLC params
---- -------- --------- ------------ ---------- -----------------------
1 SC-QAM 531000000 y 0x36 256QAM/AnnexA
2 SC-QAM 539000000 y 0x36 256QAM/AnnexA
3 SC-QAM 547000000 y 0x36 256QAM/AnnexA
4 SC-QAM 555000000 y 0x36 256QAM/AnnexA
5 SC-QAM 563000000 y 0x36 256QAM/AnnexA
6 SC-QAM 571000000 y 0x36 256QAM/AnnexA
7 SC-QAM 579000000 y 0x36 256QAM/AnnexA
8 SC-QAM 587000000 y 0x36 256QAM/AnnexA
9 SC-QAM 595000000 y 0x36 256QAM/AnnexA
10 SC-QAM 603000000 y 0x36 256QAM/AnnexA
11 SC-QAM 611000000 y 0x36 256QAM/AnnexA
12 SC-QAM 619000000 y 0x36 256QAM/AnnexA
13 SC-QAM 627000000 y 0x36 256QAM/AnnexA
14 SC-QAM 635000000 y 0x36 256QAM/AnnexA
15 SC-QAM 643000000 y 0x36 256QAM/AnnexA
16 SC-QAM 651000000 y 0x36 256QAM/AnnexA
17 SC-QAM 659000000 y 0x36 256QAM/AnnexA
18 SC-QAM 667000000 y 0x36 256QAM/AnnexA
19 SC-QAM 675000000 y 0x36 256QAM/AnnexA
20 SC-QAM 683000000 y 0x36 256QAM/AnnexA
21 SC-QAM 691000000 y 0x36 256QAM/AnnexA
22 SC-QAM 699000000 y 0x36 256QAM/AnnexA
23 SC-QAM 707000000 y 0x36 256QAM/AnnexA
24 SC-QAM 715000000 y 0x36 256QAM/AnnexA
25 SC-QAM 723000000 y 0x36 256QAM/AnnexA
26 SC-QAM 731000000 y 0x36 256QAM/AnnexA
27 SC-QAM 739000000 y 0x36 256QAM/AnnexA
28 SC-QAM 747000000 y 0x36 256QAM/AnnexA
29 SC-QAM 755000000 y 0x36 256QAM/AnnexA
30 SC-QAM 763000000 y 0x36 256QAM/AnnexA
31 SC-QAM 771000000 y 0x36 256QAM/AnnexA
32 SC-QAM 779000000 y 0x36 256QAM/AnnexA
159 OFDM PLC 897000000 n 0x36 25Khz/5us/0.625us
160 OFDM PLC 361000000 n 0x36 50Khz/0.9375us/0.625us

Trimmed Downstream Ambiguity Resolution Frequency List: list size = 3

531000000-sc_qam 539000000-sc_qam 547000000-sc_qam

visible dcid set = 7

freq with visible dcid set = 579000000

BcmCmDocsisCtlMsgACT::HandleEvent() @time=1792340 event_code=11


(kCmMdDsSgDiscDone)
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=true
[00:29:52 01/01/1970] [CmDocsisCtlThread]
BcmDocsisCmHalIf::SetPrimaryDownstreamChannel: (DOCSIS CableModem HalIf)
Installing primary downstream channel index: 0
SetRatios called with primary downstream channel number = 0
AnnexMode[0] = 1 QAM_Mode[0] = 256
Num/Den = 869/1280
3390 SCDMA/OFDM mode - ChannelNumber = 0 Numerator = 869 Denominator = 1280
CM/DocsisCtl> [00:29:52 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL failed to acquire sync or lost sync!
... TCOFDM - DTR is now locked.... (T2=150ms Sync=14)

Given a 216 MHz TCOFDM clock, the nominal value for the DTR FCW is 0xC22E45067
The DTR FCW is 0xc22e9fef - that value is good (7, within 100 ppm)
Kicked off the DPLL
LE Done bit was set
LE Done bit was set
SCQAM DS clock source.
PLL in Leaky mode.
PLL Fn = 6, k1 = 18, k2 = 19
[00:29:52 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context=1 (ErrorRecovery)
[00:29:52 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context is error recovery or startup.
Always use last good upstream target chan id=1
[00:29:52 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper) Locked on the downstream. Waiting for UCDs...
[00:29:52 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefFail: (Cm
Multi US Helper) target hwTxId=0
CM/DocsisCtl> [00:29:54 01/01/1970] [CmDocsisCtlThread]
BcmCmMultiUsHelper::TmUcdRxTimerEvent: (Cm Multi US Helper)
ucd gathering ok.

[00:29:54 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper) state at
entry:

Channel targeting:
Downstream:
fTargetDsFreqHz = 0 (0)
fCurrentDsFreqHz = 0x2282d6c0 (579000000)
fStoredDsFreqHz = 0x29020c00 (688000000)

Upstream:
fDestSingleTxTargetUsChanId = 0x1 (1)
fTargetingContext = 1 (ErrorRecovery)

Startup UCD Selection Info:

low priority candidate ucid list = 1 4 2 3 7 8 6 5


happy home ucid set = 1 2 3 4

Upstream Active Channel Settings:

ucid rpt enable sel prio MAP source dcid's


---- ---------- -------- -----------------
1 0x1c0 0
2 0x1c0 0
3 0x1c0 0
4 0x1c0 0
5 0x1c0 0
6 0x1c0 0
7 0x1c0 0
8 0x1c0 0

BcmCmUsTargetMset (a.k.a. usable UCDs gathered during startup):

us config
phy change ranging scdma
type ucid dcid count tried? enabled?
---- ---- ---- ------ ------- --------
3 1 7 4 n n
3 2 7 4 n n
3 3 7 4 n n
3 4 7 4 n n
3 5 7 4 n n
3 6 7 4 n n
3 7 7 4 n n
3 8 7 4 n n

[00:29:54 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper)
starting docs3 upstream initialization on target ucid=1
with upstream phy type 3 on hardware transmitter index 0

[00:29:54 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::ExecuteTccCmd: hwTxId=0


docs ucid=0
[00:29:54 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0
[00:29:54 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::InstallUsSets: Installing
UCD w/ucid for UCID=1 for CM hardware tx chan 0

[00:29:54 01/01/1970] [CmDocsisCtlThread]


BcmCmUsSetsState::TestAndLaunchUsTimeSync: starting upstream time sync
acquisition...
[00:29:54 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefOk: (Cm
Multi US Helper) target hwTxId=0
[00:29:54 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::UsTimeRefOk: upstream time
sync acquired for fHwTxId=0

== Beginning initial ranging for Docsis UCID 1 ==


Minimum transmit power is 17 dBmV
Maximum transmit power is 53 dBmV
Stored power level for UCID 1 is 39 dBmV
Using per transmitter stored initial upstream power = 39 dBmV hwTxId = 0 docsis
UCID = 1
RNG-RSP UsChanId=1 Adj: tim=1944 freq=-153 Stat=Continue (CmdPwr (UsChanId-
dBmV): (1-41.25) )
[00:29:55 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0xc9
RNG-RSP UsChanId=1 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (1-
41.25) )
RNG-RSP UsChanId=1 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (1-
41.25) )
RNG-RSP UsChanId=1 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (1-
41.25) )
RNG-RSP UsChanId=1 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (1-
41.25) )
RNG-RSP UsChanId=1 Adj: tim=0 freq=0 Stat=Success (CmdPwr (UsChanId-dBmV): (1-
41.25) )
[00:30:00 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::FirstRngSuccess:
(CmDocsisCtlThread)
first RNG-RSP w/status==SUCCESS for hwTxId=0 and DOCSIS ucid=1
[00:30:00 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::LaunchEaeBpkm:
(CmDocsisCtlThread) BPKM enabled. starting Early Authentication and Encryption BPKM
key requests. Primary Sid = 201
CM/DocsisCtl> Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0

BcmCmUsChanTimerMuxACT::HandleEvent() @time=1989890 fTimerType=5


(kT4NoStationMaint) hwTxId=0 docs ucid=1
[00:33:09 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::T4NoStationMaintEvent: ERROR - no Station Maint map op error.
hwTxId=0 docs ucid=1
[00:33:09 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::CommonRngErrorHandler: reason=10 (T4NoStationMaintTimeout)
hwTxId=0 docs ucid=1
[00:33:09 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) Purging DS
frequency 579000000 from current scan pass due to pre-registration restart error
[00:33:09 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) reinit MAC #9:
T4NoStationMaintTimeout

[00:33:09 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::Reset:


(CmDocsisCtlThread) DefaultSnmpAgentClass::RestartPendingEvent for Vendor CM
Agent w/ BRCM Factory Support
Logging event: Received Response to Broadcast Maintenance Request, But no Unicast
Maintenance opportunities received - T4 time out;CM-MAC=fc:4a:e9:de:ad:88;CMTS-
MAC=28:52:61:fa:d8:78;CM-QOS=1.1;CM-VER=3.1;
Vendor CM Agent w/ BRCM Factory Support updating ifTableLastChange.
Vendor CM Agent w/ BRCM Factory Support resetting to default state.
Vendor CM Agent w/ BRCM Factory Support destroying users...
Vendor CM Agent w/ BRCM Factory Support destroying notifies...
Vendor CM Agent w/ BRCM Factory Support destroying views...
Allowing DOCS-CABLE-DEVICE-MIB IP filters.
Vendor CM Agent w/ BRCM Factory Support deferring traps.
Received RG Event 0x80000001 State 0x1
eRouter Linux WAN Down
[00:33:10 01/01/1970] [eRouterMsgPipe] eRouterMsgPipe::UpdateIpNetToMediaEntry:
(eRouterMsgPipe) eRouter IP address:0.0.0.0
00:33:10.180 01/01/1970 (CALC) mtaCmStatusInfo() - MTA is Signaled: *NOT-
OPERATIONAL* (Stat=0x1) emtaCurState = 0.
EmtaSnmpAgent::SoftReset
Pausing trap thread
emta factory agentResetting to default state.
emta factory agent destroying users...
emta factory agent destroying notifies...
emta factory agent destroying views...
emta factory agent entering RFC-2576 Coexistence security mode.
emta factory agent entering Basic/Hybrid flow provisioning mode.
Resuming trap thread
Stopping DHCP/ToD/TFTP (client requested)...
[00:33:10 01/01/1970] [CmDocsisIpThread] BcmEcosIpHalIf::RemoveIpv6Address: (IP
Stack1 HalIf) ERROR - Failed to remove IPv6 address fe80::fe4a:e9ff:fede:ad88/64
from the stack!
[00:33:10 01/01/1970] [CmDocsisIpThread] BcmDhcpV6ClientIf::ReleaseAddresses:
(DHCPv6 ClientIf for IP Stack1) ERROR - IA state is initial; there is no address to
release.
BcmDocsis3DsMacEnableMulticastDsidForwarding 0; primary DS = 0
SCQAM DSID filter control = 0x00
OFDM DSID filter control = 0x01
CM/DocsisCtl> Deleting DOCSIS 1.0 CoS Settings for SID 0xc9
[00:33:10 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows:
(DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along
with associated Classifiers and PHS rules...
[00:33:10 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState:
(CmDocsisCtlThread)
[00:33:10 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Primary SID for usHwChannel 0 to 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 1
Updating US chan 8 data Profile test msg for Sid: 0x0.
Updating US chan 9 data Profile test msg for Sid: 0x0.
CM/DocsisCtl> [00:33:11 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL declared PULSE lost!
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=false
[00:33:11 01/01/1970] [CmDocsisCtlThread] BcmCmMultiDsHelper::PreRegDsChanChange:
target freq hz = 0
reason string = ErrorRecovery
CmInitReason = 16

Starting DS scanning...
[00:33:11 01/01/1970] [CmDocsisCtlThread] BcmCmDownstreamScan::StartScan: Starting
DS scan
Checking for cable cut...

CM/DocsisCtl> Plant power is 15.35

Cable connected

CM/DocsisCtl> Scanning 580.000 MHz SC-QAM (Annex A(Eu.1M))


Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 581.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 582.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 583.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 584.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 585.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 586.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 587.000 MHz SC-QAM (Annex A(Eu.1M)) locked SC-QAM
[00:33:14 01/01/1970] [CmDocsisCtlThread] BcmCmDsChan::DsLockOk: (BcmCmDsChan 0)
hwRxId=0 freq=0 dcid=0

******************************************
DOWNSTREAM STATUS
******************************************
HW Channel ID = 0
Phy type: SC-QAM
DS active chan settings:
ds chan id = 0
center freq, Hz = 587000000 Hz
primary capable = false
status event rpt bitmask = 0

CM HW Detected DS Phy Settings:


Center Freq, Hz = 587000000
QAM = Locked
FEC = Locked
Carrier Freq Offset, kHz = 0
Channel Width, Hz = 8000000
Modulation = Qam256
Interleaver = Taps12Incr17
Symbol Rate, sym/sec = 6952000

******************************************

[00:33:15 01/01/1970] [CmDocsisCtlThread]


BcmCmMacDomainSetsState::StartDsMacMddInit:
**********************************************
Waiting for MDDs...
**********************************************
CM/DocsisCtl>
BcmCmDocsisCtlMsgACT::HandleEvent() @time=1995750 event_code=4 (kCmPriDsMddSetsOk)

MDD diplexer band edge not specified.


MDD Plant US Frequency Range = extended.
Requested Spectrum = US:(0 MHz..85 MHz) DS:(0 MHz..0 MHz)
Best Match = 0: US:(5 MHz..85 MHz) DS:(108 MHz..1218 MHz)
Switchable diplexer ECN support disabled. NOT switching diplexer.
[00:33:15 01/01/1970] [CmDocsisCtlThread]
BcmCmMdDsSgDiscState::TrimSgSetWithoutThisDcid:
1 candidate MD-DS-SG remain after TrimSgSetWithoutThisDcid( target_dcid )
for target_dcid=0x08 (8)
[00:33:15 01/01/1970] [CmDocsisCtlThread] BcmCmMdDsSgDiscState::StartMdDsSgDisc:
special case: one and only one MD-DS-SG contains mdd_dcid.
fMdDsSgId=0x1d (29)
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , M-d++a+i-+Ty-eA+dA++e|:
i_L-ca+A++e|A: 1
Chec+ +D_A++e|A
Cha++e+ Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1

MD-DS-SG discovery info:

fCmMdDsSgDiscState = 6 (kMdDsSgDiscDone)
fMdDsSgId = 0x1d (29)
fMdDsSgDiscovered = true

Trimmed Candidate Downstream Service Group Settings List: list size = 1

sgid size member dcid's


---- ---- -------------
29 34 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
27 28 29 30 31 32 159 160

Downstream Active Channel Settings List:

dcid type frequency prim capable rpt enable mod/annex or PLC params
---- -------- --------- ------------ ---------- -----------------------
1 SC-QAM 531000000 y 0x36 256QAM/AnnexA
2 SC-QAM 539000000 y 0x36 256QAM/AnnexA
3 SC-QAM 547000000 y 0x36 256QAM/AnnexA
4 SC-QAM 555000000 y 0x36 256QAM/AnnexA
5 SC-QAM 563000000 y 0x36 256QAM/AnnexA
6 SC-QAM 571000000 y 0x36 256QAM/AnnexA
7 SC-QAM 579000000 y 0x36 256QAM/AnnexA
8 SC-QAM 587000000 y 0x36 256QAM/AnnexA
9 SC-QAM 595000000 y 0x36 256QAM/AnnexA
10 SC-QAM 603000000 y 0x36 256QAM/AnnexA
11 SC-QAM 611000000 y 0x36 256QAM/AnnexA
12 SC-QAM 619000000 y 0x36 256QAM/AnnexA
13 SC-QAM 627000000 y 0x36 256QAM/AnnexA
14 SC-QAM 635000000 y 0x36 256QAM/AnnexA
15 SC-QAM 643000000 y 0x36 256QAM/AnnexA
16 SC-QAM 651000000 y 0x36 256QAM/AnnexA
17 SC-QAM 659000000 y 0x36 256QAM/AnnexA
18 SC-QAM 667000000 y 0x36 256QAM/AnnexA
19 SC-QAM 675000000 y 0x36 256QAM/AnnexA
20 SC-QAM 683000000 y 0x36 256QAM/AnnexA
21 SC-QAM 691000000 y 0x36 256QAM/AnnexA
22 SC-QAM 699000000 y 0x36 256QAM/AnnexA
23 SC-QAM 707000000 y 0x36 256QAM/AnnexA
24 SC-QAM 715000000 y 0x36 256QAM/AnnexA
25 SC-QAM 723000000 y 0x36 256QAM/AnnexA
26 SC-QAM 731000000 y 0x36 256QAM/AnnexA
27 SC-QAM 739000000 y 0x36 256QAM/AnnexA
28 SC-QAM 747000000 y 0x36 256QAM/AnnexA
29 SC-QAM 755000000 y 0x36 256QAM/AnnexA
30 SC-QAM 763000000 y 0x36 256QAM/AnnexA
31 SC-QAM 771000000 y 0x36 256QAM/AnnexA
32 SC-QAM 779000000 y 0x36 256QAM/AnnexA
159 OFDM PLC 897000000 n 0x36 25Khz/5us/0.625us
160 OFDM PLC 361000000 n 0x36 50Khz/0.9375us/0.625us

Trimmed Downstream Ambiguity Resolution Frequency List: list size = 3


531000000-sc_qam 539000000-sc_qam 547000000-sc_qam

visible dcid set = 8

freq with visible dcid set = 587000000

BcmCmDocsisCtlMsgACT::HandleEvent() @time=1996340 event_code=11


(kCmMdDsSgDiscDone)
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=true
[00:33:16 01/01/1970] [CmDocsisCtlThread]
BcmDocsisCmHalIf::SetPrimaryDownstreamChannel: (DOCSIS CableModem HalIf)
Installing primary downstream channel index: 0
SetRatios called with primary downstream channel number = 0
AnnexMode[0] = 1 QAM_Mode[0] = 256
Num/Den = 869/1280
3390 SCDMA/OFDM mode - ChannelNumber = 0 Numerator = 869 Denominator = 1280
CM/DocsisCtl> [00:33:16 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL failed to acquire sync or lost sync!
... TCOFDM - DTR is now locked.... (T2=150ms Sync=14)

Given a 216 MHz TCOFDM clock, the nominal value for the DTR FCW is 0xC22E45067
The DTR FCW is 0xc22eabc1 - that value is good (8, within 100 ppm)
Kicked off the DPLL
LE Done bit was set
LE Done bit was set
SCQAM DS clock source.
PLL in Leaky mode.
PLL Fn = 6, k1 = 18, k2 = 19
[00:33:16 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context=1 (ErrorRecovery)
[00:33:16 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context is error recovery or startup.
Always use last good upstream target chan id=1
[00:33:16 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper) Locked on the downstream. Waiting for UCDs...
[00:33:16 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefFail: (Cm
Multi US Helper) target hwTxId=0
CM/DocsisCtl> [00:33:18 01/01/1970] [CmDocsisCtlThread]
BcmCmMultiUsHelper::TmUcdRxTimerEvent: (Cm Multi US Helper)
ucd gathering ok.

[00:33:18 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper) state at
entry:

Channel targeting:
Downstream:
fTargetDsFreqHz = 0 (0)
fCurrentDsFreqHz = 0x22fce8c0 (587000000)
fStoredDsFreqHz = 0x29020c00 (688000000)

Upstream:
fDestSingleTxTargetUsChanId = 0x1 (1)
fTargetingContext = 1 (ErrorRecovery)

Startup UCD Selection Info:

low priority candidate ucid list = 3 1 4 2 5 6 7 8


happy home ucid set = 1 2 3 4

Upstream Active Channel Settings:

ucid rpt enable sel prio MAP source dcid's


---- ---------- -------- -----------------
1 0x1c0 0
2 0x1c0 0
3 0x1c0 0
4 0x1c0 0
5 0x1c0 0
6 0x1c0 0
7 0x1c0 0
8 0x1c0 0

BcmCmUsTargetMset (a.k.a. usable UCDs gathered during startup):

us config
phy change ranging scdma
type ucid dcid count tried? enabled?
---- ---- ---- ------ ------- --------
3 1 8 4 n n
3 2 8 4 n n
3 3 8 4 n n
3 4 8 4 n n
3 5 8 4 n n
3 6 8 4 n n
3 7 8 4 n n
3 8 8 4 n n

[00:33:18 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper)
starting docs3 upstream initialization on target ucid=3
with upstream phy type 3 on hardware transmitter index 0

[00:33:18 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::ExecuteTccCmd: hwTxId=0


docs ucid=0
[00:33:18 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0
[00:33:18 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::InstallUsSets: Installing
UCD w/ucid for UCID=3 for CM hardware tx chan 0

[00:33:18 01/01/1970] [CmDocsisCtlThread]


BcmCmUsSetsState::TestAndLaunchUsTimeSync: starting upstream time sync
acquisition...
[00:33:18 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefOk: (Cm
Multi US Helper) target hwTxId=0
[00:33:18 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::UsTimeRefOk: upstream time
sync acquired for fHwTxId=0

== Beginning initial ranging for Docsis UCID 3 ==


Minimum transmit power is 17 dBmV
Maximum transmit power is 53 dBmV
Stored power level for UCID 3 is 38 dBmV
Using per transmitter stored initial upstream power = 38 dBmV hwTxId = 0 docsis
UCID = 3
RNG-RSP UsChanId=3 Adj: tim=1864 freq=-21 Stat=Continue (CmdPwr (UsChanId-dBmV):
(3-41.25) )
[00:33:19 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0xc9
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (3-
41.75) )
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (3-
41.25) )
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (3-
41.75) )
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (3-
41.25) )
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Success (CmdPwr (UsChanId-dBmV): (3-
41.75) )
[00:33:24 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::FirstRngSuccess:
(CmDocsisCtlThread)
first RNG-RSP w/status==SUCCESS for hwTxId=0 and DOCSIS ucid=3
[00:33:24 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::LaunchEaeBpkm:
(CmDocsisCtlThread) BPKM enabled. starting Early Authentication and Encryption BPKM
key requests. Primary Sid = 201
CM/DocsisCtl> Bandwidth request failure! Status = 0

BcmCmUsChanTimerMuxACT::HandleEvent() @time=2194170 fTimerType=5


(kT4NoStationMaint) hwTxId=0 docs ucid=3
[00:36:34 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::T4NoStationMaintEvent: ERROR - no Station Maint map op error.
hwTxId=0 docs ucid=3
[00:36:34 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::CommonRngErrorHandler: reason=10 (T4NoStationMaintTimeout)
hwTxId=0 docs ucid=3
[00:36:34 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) Purging DS
frequency 587000000 from current scan pass due to pre-registration restart error
[00:36:34 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) reinit MAC #10:
T4NoStationMaintTimeout

[00:36:34 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::Reset:


(CmDocsisCtlThread) DefaultSnmpAgentClass::RestartPendingEvent for Vendor CM
Agent w/ BRCM Factory Support
Logging event: Received Response to Broadcast Maintenance Request, But no Unicast
Maintenance opportunities received - T4 time out;CM-MAC=fc:4a:e9:de:ad:88;CMTS-
MAC=28:52:61:fa:d8:78;CM-QOS=1.1;CM-VER=3.1;
Vendor CM Agent w/ BRCM Factory Support updating ifTableLastChange.
Vendor CM Agent w/ BRCM Factory Support resetting to default state.
Vendor CM Agent w/ BRCM Factory Support destroying users...
Vendor CM Agent w/ BRCM Factory Support destroying notifies...
Vendor CM Agent w/ BRCM Factory Support destroying views...
Allowing DOCS-CABLE-DEVICE-MIB IP filters.
Vendor CM Agent w/ BRCM Factory Support deferring traps.
Received RG Event 0x80000001 State 0x1
eRouter Linux WAN Down
[00:36:34 01/01/1970] [eRouterMsgPipe] eRouterMsgPipe::UpdateIpNetToMediaEntry:
(eRouterMsgPipe) eRouter IP address:0.0.0.0
00:36:34.470 01/01/1970 (CALC) mtaCmStatusInfo() - MTA is Signaled: *NOT-
OPERATIONAL* (Stat=0x1) emtaCurState = 0.
EmtaSnmpAgent::SoftReset
Pausing trap thread
emta factory agentResetting to default state.
emta factory agent destroying users...
emta factory agent destroying notifies...
emta factory agent destroying views...
emta factory agent entering RFC-2576 Coexistence security mode.
emta factory agent entering Basic/Hybrid flow provisioning mode.
Resuming trap thread
Stopping DHCP/ToD/TFTP (client requested)...
[00:36:34 01/01/1970] [CmDocsisIpThread] BcmEcosIpHalIf::RemoveIpv6Address: (IP
Stack1 HalIf) ERROR - Failed to remove IPv6 address fe80::fe4a:e9ff:fede:ad88/64
from the stack!
[00:36:34 01/01/1970] [CmDocsisIpThread] BcmDhcpV6ClientIf::ReleaseAddresses:
(DHCPv6 ClientIf for IP Stack1) ERROR - IA state is initial; there is no address to
release.
BcmDocsis3DsMacEnableMulticastDsidForwarding 0; primary DS = 0
SCQAM DSID filter control = 0x00
OFDM DSID filter control = 0x01
Deleting DOCSIS 1.0 CoS Settings for SID 0xc9
[00:36:34 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows:
(DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along
with associated Classifiers and PHS rules...
[00:36:34 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState:
(CmDocsisCtlThread)
[00:36:34 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Primary SID for usHwChannel 0 to 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 1
Updating US chan 8 data Profile test msg for Sid: 0x0.
Updating US chan 9 data Profile test msg for Sid: 0x0.
CM/DocsisCtl> [00:36:35 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL declared PULSE lost!
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=false
[00:36:35 01/01/1970] [CmDocsisCtlThread] BcmCmMultiDsHelper::PreRegDsChanChange:
target freq hz = 0
reason string = ErrorRecovery
CmInitReason = 16

Starting DS scanning...
[00:36:35 01/01/1970] [CmDocsisCtlThread] BcmCmDownstreamScan::StartScan: Starting
DS scan
Checking for cable cut...

CM/DocsisCtl> Plant power is 15.35

Cable connected

CM/DocsisCtl> Scanning 588.000 MHz SC-QAM (Annex A(Eu.1M))


Scanning 589.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 590.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 591.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 592.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 593.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 594.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 595.000 MHz SC-QAM (Annex A(Eu.1M)) locked SC-QAM
[00:36:38 01/01/1970] [CmDocsisCtlThread] BcmCmDsChan::DsLockOk: (BcmCmDsChan 0)
hwRxId=0 freq=0 dcid=0

******************************************
DOWNSTREAM STATUS
******************************************
HW Channel ID = 0
Phy type: SC-QAM
DS active chan settings:
ds chan id = 0
center freq, Hz = 595000000 Hz
primary capable = false
status event rpt bitmask = 0

CM HW Detected DS Phy Settings:


Center Freq, Hz = 595000000
QAM = Locked
FEC = Locked
Carrier Freq Offset, kHz = 0
Channel Width, Hz = 8000000
Modulation = Qam256
Interleaver = Taps12Incr17
Symbol Rate, sym/sec = 6952000

******************************************

[00:36:38 01/01/1970] [CmDocsisCtlThread]


BcmCmMacDomainSetsState::StartDsMacMddInit:
**********************************************
Waiting for MDDs...
**********************************************

CM/DocsisCtl>
BcmCmDocsisCtlMsgACT::HandleEvent() @time=2199750 event_code=4 (kCmPriDsMddSetsOk)

MDD diplexer band edge not specified.


MDD Plant US Frequency Range = extended.
Requested Spectrum = US:(0 MHz..85 MHz) DS:(0 MHz..0 MHz)
Best Match = 0: US:(5 MHz..85 MHz) DS:(108 MHz..1218 MHz)
Switchable diplexer ECN support disabled. NOT switching diplexer.
[00:36:39 01/01/1970] [CmDocsisCtlThread]
BcmCmMdDsSgDiscState::TrimSgSetWithoutThisDcid:
1 candidate MD-DS-SG remain after TrimSgSetWithoutThisDcid( target_dcid )
for target_dcid=0x09 (9)
[00:36:39 01/01/1970] [CmDocsisCtlThread] BcmCmMdDsSgDiscState::StartMdDsSgDisc:
special case: one and only one MD-DS-SG contains mdd_dcid.
fMdDsSgId=0x1d (29)
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , M-d++a+i-+Ty-eA+dA++e|:
i_L-ca+A++e|A: 1
Chec+ +D_A++e|A
Cha++e+ Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1

MD-DS-SG discovery info:

fCmMdDsSgDiscState = 6 (kMdDsSgDiscDone)
fMdDsSgId = 0x1d (29)
fMdDsSgDiscovered = true

Trimmed Candidate Downstream Service Group Settings List: list size = 1

sgid size member dcid's


---- ---- -------------
29 34 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
27 28 29 30 31 32 159 160

Downstream Active Channel Settings List:

dcid type frequency prim capable rpt enable mod/annex or PLC params
---- -------- --------- ------------ ---------- -----------------------
1 SC-QAM 531000000 y 0x36 256QAM/AnnexA
2 SC-QAM 539000000 y 0x36 256QAM/AnnexA
3 SC-QAM 547000000 y 0x36 256QAM/AnnexA
4 SC-QAM 555000000 y 0x36 256QAM/AnnexA
5 SC-QAM 563000000 y 0x36 256QAM/AnnexA
6 SC-QAM 571000000 y 0x36 256QAM/AnnexA
7 SC-QAM 579000000 y 0x36 256QAM/AnnexA
8 SC-QAM 587000000 y 0x36 256QAM/AnnexA
9 SC-QAM 595000000 y 0x36 256QAM/AnnexA
10 SC-QAM 603000000 y 0x36 256QAM/AnnexA
11 SC-QAM 611000000 y 0x36 256QAM/AnnexA
12 SC-QAM 619000000 y 0x36 256QAM/AnnexA
13 SC-QAM 627000000 y 0x36 256QAM/AnnexA
14 SC-QAM 635000000 y 0x36 256QAM/AnnexA
15 SC-QAM 643000000 y 0x36 256QAM/AnnexA
16 SC-QAM 651000000 y 0x36 256QAM/AnnexA
17 SC-QAM 659000000 y 0x36 256QAM/AnnexA
18 SC-QAM 667000000 y 0x36 256QAM/AnnexA
19 SC-QAM 675000000 y 0x36 256QAM/AnnexA
20 SC-QAM 683000000 y 0x36 256QAM/AnnexA
21 SC-QAM 691000000 y 0x36 256QAM/AnnexA
22 SC-QAM 699000000 y 0x36 256QAM/AnnexA
23 SC-QAM 707000000 y 0x36 256QAM/AnnexA
24 SC-QAM 715000000 y 0x36 256QAM/AnnexA
25 SC-QAM 723000000 y 0x36 256QAM/AnnexA
26 SC-QAM 731000000 y 0x36 256QAM/AnnexA
27 SC-QAM 739000000 y 0x36 256QAM/AnnexA
28 SC-QAM 747000000 y 0x36 256QAM/AnnexA
29 SC-QAM 755000000 y 0x36 256QAM/AnnexA
30 SC-QAM 763000000 y 0x36 256QAM/AnnexA
31 SC-QAM 771000000 y 0x36 256QAM/AnnexA
32 SC-QAM 779000000 y 0x36 256QAM/AnnexA
159 OFDM PLC 897000000 n 0x36 25Khz/5us/0.625us
160 OFDM PLC 361000000 n 0x36 50Khz/0.9375us/0.625us

Trimmed Downstream Ambiguity Resolution Frequency List: list size = 3

531000000-sc_qam 539000000-sc_qam 547000000-sc_qam

visible dcid set = 9

freq with visible dcid set = 595000000

BcmCmDocsisCtlMsgACT::HandleEvent() @time=2200340 event_code=11


(kCmMdDsSgDiscDone)
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=true
[00:36:40 01/01/1970] [CmDocsisCtlThread]
BcmDocsisCmHalIf::SetPrimaryDownstreamChannel: (DOCSIS CableModem HalIf)
Installing primary downstream channel index: 0
SetRatios called with primary downstream channel number = 0
AnnexMode[0] = 1 QAM_Mode[0] = 256
Num/Den = 869/1280
3390 SCDMA/OFDM mode - ChannelNumber = 0 Numerator = 869 Denominator = 1280
CM/DocsisCtl> [00:36:40 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL failed to acquire sync or lost sync!
... TCOFDM - DTR is now locked.... (T2=150ms Sync=14)

Given a 216 MHz TCOFDM clock, the nominal value for the DTR FCW is 0xC22E45067
The DTR FCW is 0xc22e90bc - that value is good (5, within 100 ppm)
Kicked off the DPLL
LE Done bit was set
LE Done bit was set
SCQAM DS clock source.
PLL in Leaky mode.
PLL Fn = 6, k1 = 18, k2 = 19
[00:36:40 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context=1 (ErrorRecovery)
[00:36:40 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context is error recovery or startup.
Always use last good upstream target chan id=1
[00:36:40 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper) Locked on the downstream. Waiting for UCDs...
[00:36:40 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefFail: (Cm
Multi US Helper) target hwTxId=0
CM/DocsisCtl> [00:36:42 01/01/1970] [CmDocsisCtlThread]
BcmCmMultiUsHelper::TmUcdRxTimerEvent: (Cm Multi US Helper)
ucd gathering ok.

[00:36:42 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper) state at
entry:

Channel targeting:
Downstream:
fTargetDsFreqHz = 0 (0)
fCurrentDsFreqHz = 0x2376fac0 (595000000)
fStoredDsFreqHz = 0x29020c00 (688000000)

Upstream:
fDestSingleTxTargetUsChanId = 0x1 (1)
fTargetingContext = 1 (ErrorRecovery)

Startup UCD Selection Info:

low priority candidate ucid list = 1 4 3 2 5 6 7 8


happy home ucid set = 1 2 3 4

Upstream Active Channel Settings:

ucid rpt enable sel prio MAP source dcid's


---- ---------- -------- -----------------
1 0x1c0 0
2 0x1c0 0
3 0x1c0 0
4 0x1c0 0
5 0x1c0 0
6 0x1c0 0
7 0x1c0 0
8 0x1c0 0

BcmCmUsTargetMset (a.k.a. usable UCDs gathered during startup):

us config
phy change ranging scdma
type ucid dcid count tried? enabled?
---- ---- ---- ------ ------- --------
3 1 9 4 n n
3 2 9 4 n n
3 3 9 4 n n
3 4 9 4 n n
3 5 9 4 n n
3 6 9 4 n n
3 7 9 4 n n
3 8 9 4 n n

[00:36:42 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper)
starting docs3 upstream initialization on target ucid=1
with upstream phy type 3 on hardware transmitter index 0

[00:36:42 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::ExecuteTccCmd: hwTxId=0


docs ucid=0
[00:36:42 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0
[00:36:42 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::InstallUsSets: Installing
UCD w/ucid for UCID=1 for CM hardware tx chan 0

[00:36:42 01/01/1970] [CmDocsisCtlThread]


BcmCmUsSetsState::TestAndLaunchUsTimeSync: starting upstream time sync
acquisition...
[00:36:42 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefOk: (Cm
Multi US Helper) target hwTxId=0
[00:36:42 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::UsTimeRefOk: upstream time
sync acquired for fHwTxId=0

== Beginning initial ranging for Docsis UCID 1 ==


Minimum transmit power is 17 dBmV
Maximum transmit power is 53 dBmV
Stored power level for UCID 1 is 39 dBmV
Using per transmitter stored initial upstream power = 39 dBmV hwTxId = 0 docsis
UCID = 1
RNG-RSP UsChanId=1 Adj: tim=1915 freq=36 Stat=Continue (CmdPwr (UsChanId-dBmV):
(1-41.25) )
[00:36:43 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0xc9
RNG-RSP UsChanId=1 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (1-
41.25) )
RNG-RSP UsChanId=1 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (1-
41.25) )
RNG-RSP UsChanId=1 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (1-
41.25) )
RNG-RSP UsChanId=1 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (1-
41.25) )
RNG-RSP UsChanId=1 Adj: tim=0 freq=0 Stat=Success (CmdPwr (UsChanId-dBmV): (1-
41.25) )
[00:36:48 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::FirstRngSuccess:
(CmDocsisCtlThread)
first RNG-RSP w/status==SUCCESS for hwTxId=0 and DOCSIS ucid=1
[00:36:48 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::LaunchEaeBpkm:
(CmDocsisCtlThread) BPKM enabled. starting Early Authentication and Encryption BPKM
key requests. Primary Sid = 201
CM/DocsisCtl> Bandwidth request failure! Status = 0
BcmCmUsChanTimerMuxACT::HandleEvent() @time=2397690 fTimerType=5
(kT4NoStationMaint) hwTxId=0 docs ucid=1
[00:39:57 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::T4NoStationMaintEvent: ERROR - no Station Maint map op error.
hwTxId=0 docs ucid=1
[00:39:57 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::CommonRngErrorHandler: reason=10 (T4NoStationMaintTimeout)
hwTxId=0 docs ucid=1
[00:39:57 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) Purging DS
frequency 595000000 from current scan pass due to pre-registration restart error
[00:39:57 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) reinit MAC #11:
T4NoStationMaintTimeout

[00:39:57 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::Reset:


(CmDocsisCtlThread) DefaultSnmpAgentClass::RestartPendingEvent for Vendor CM
Agent w/ BRCM Factory Support
Logging event: Received Response to Broadcast Maintenance Request, But no Unicast
Maintenance opportunities received - T4 time out;CM-MAC=fc:4a:e9:de:ad:88;CMTS-
MAC=28:52:61:fa:d8:78;CM-QOS=1.1;CM-VER=3.1;
Vendor CM Agent w/ BRCM Factory Support updating ifTableLastChange.
Vendor CM Agent w/ BRCM Factory Support resetting to default state.
Vendor CM Agent w/ BRCM Factory Support destroying users...
Vendor CM Agent w/ BRCM Factory Support destroying notifies...
Vendor CM Agent w/ BRCM Factory Support destroying views...
Allowing DOCS-CABLE-DEVICE-MIB IP filters.
Vendor CM Agent w/ BRCM Factory Support deferring traps.
Received RG Event 0x80000001 State 0x1
eRouter Linux WAN Down
[00:39:57 01/01/1970] [eRouterMsgPipe] eRouterMsgPipe::UpdateIpNetToMediaEntry:
(eRouterMsgPipe) eRouter IP address:0.0.0.0
00:39:57.980 01/01/1970 (CALC) mtaCmStatusInfo() - MTA is Signaled: *NOT-
OPERATIONAL* (Stat=0x1) emtaCurState = 0.
EmtaSnmpAgent::SoftReset
Pausing trap thread
emta factory agentResetting to default state.
emta factory agent destroying users...
emta factory agent destroying notifies...
emta factory agent destroying views...
emta factory agent entering RFC-2576 Coexistence security mode.
emta factory agent entering Basic/Hybrid flow provisioning mode.
Resuming trap thread
Stopping DHCP/ToD/TFTP (client requested)...
[00:39:58 01/01/1970] [CmDocsisIpThread] BcmEcosIpHalIf::RemoveIpv6Address: (IP
Stack1 HalIf) ERROR - Failed to remove IPv6 address fe80::fe4a:e9ff:fede:ad88/64
from the stack!
[00:39:58 01/01/1970] [CmDocsisIpThread] BcmDhcpV6ClientIf::ReleaseAddresses:
(DHCPv6 ClientIf for IP Stack1) ERROR - IA state is initial; there is no address to
release.
BcmDocsis3DsMacEnableMulticastDsidForwarding 0; primary DS = 0
SCQAM DSID filter control = 0x00
OFDM DSID filter control = 0x01
CM/DocsisCtl> Deleting DOCSIS 1.0 CoS Settings for SID 0xc9
[00:39:58 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows:
(DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along
with associated Classifiers and PHS rules...
[00:39:58 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState:
(CmDocsisCtlThread)
[00:39:58 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Primary SID for usHwChannel 0 to 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 1
Updating US chan 8 data Profile test msg for Sid: 0x0.
Updating US chan 9 data Profile test msg for Sid: 0x0.
CM/DocsisCtl> [00:39:59 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL declared PULSE lost!
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=false
[00:39:59 01/01/1970] [CmDocsisCtlThread] BcmCmMultiDsHelper::PreRegDsChanChange:
target freq hz = 0
reason string = ErrorRecovery
CmInitReason = 16

Starting DS scanning...
[00:39:59 01/01/1970] [CmDocsisCtlThread] BcmCmDownstreamScan::StartScan: Starting
DS scan
Checking for cable cut...

CM/DocsisCtl> Plant power is 15.35

Cable connected

CM/DocsisCtl> Scanning 596.000 MHz SC-QAM (Annex A(Eu.1M))


Scanning 597.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 598.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 599.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 600.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 601.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 602.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 603.000 MHz SC-QAM (Annex A(Eu.1M)) locked SC-QAM
[00:40:02 01/01/1970] [CmDocsisCtlThread] BcmCmDsChan::DsLockOk: (BcmCmDsChan 0)
hwRxId=0 freq=0 dcid=0

******************************************
DOWNSTREAM STATUS
******************************************
HW Channel ID = 0
Phy type: SC-QAM
DS active chan settings:
ds chan id = 0
center freq, Hz = 603000000 Hz
primary capable = false
status event rpt bitmask = 0

CM HW Detected DS Phy Settings:


Center Freq, Hz = 603000000
QAM = Locked
FEC = Locked
Carrier Freq Offset, kHz = 0
Channel Width, Hz = 8000000
Modulation = Qam256
Interleaver = Taps12Incr17
Symbol Rate, sym/sec = 6952000
******************************************

[00:40:02 01/01/1970] [CmDocsisCtlThread]


BcmCmMacDomainSetsState::StartDsMacMddInit:
**********************************************
Waiting for MDDs...
**********************************************

CM/DocsisCtl>
BcmCmDocsisCtlMsgACT::HandleEvent() @time=2403750 event_code=4 (kCmPriDsMddSetsOk)

MDD diplexer band edge not specified.


MDD Plant US Frequency Range = extended.
Requested Spectrum = US:(0 MHz..85 MHz) DS:(0 MHz..0 MHz)
Best Match = 0: US:(5 MHz..85 MHz) DS:(108 MHz..1218 MHz)
Switchable diplexer ECN support disabled. NOT switching diplexer.
[00:40:03 01/01/1970] [CmDocsisCtlThread]
BcmCmMdDsSgDiscState::TrimSgSetWithoutThisDcid:
1 candidate MD-DS-SG remain after TrimSgSetWithoutThisDcid( target_dcid )
for target_dcid=0x0a (10)
[00:40:03 01/01/1970] [CmDocsisCtlThread] BcmCmMdDsSgDiscState::StartMdDsSgDisc:
special case: one and only one MD-DS-SG contains mdd_dcid.
fMdDsSgId=0x1d (29)
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , M-d++a+i-+Ty-eA+dA++e|:
i_L-ca+A++e|A: 1
Chec+ +D_A++e|A
Cha++e+ Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1

MD-DS-SG discovery info:

fCmMdDsSgDiscState = 6 (kMdDsSgDiscDone)
fMdDsSgId = 0x1d (29)
fMdDsSgDiscovered = true

Trimmed Candidate Downstream Service Group Settings List: list size = 1

sgid size member dcid's


---- ---- -------------
29 34 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
27 28 29 30 31 32 159 160

Downstream Active Channel Settings List:

dcid type frequency prim capable rpt enable mod/annex or PLC params
---- -------- --------- ------------ ---------- -----------------------
1 SC-QAM 531000000 y 0x36 256QAM/AnnexA
2 SC-QAM 539000000 y 0x36 256QAM/AnnexA
3 SC-QAM 547000000 y 0x36 256QAM/AnnexA
4 SC-QAM 555000000 y 0x36 256QAM/AnnexA
5 SC-QAM 563000000 y 0x36 256QAM/AnnexA
6 SC-QAM 571000000 y 0x36 256QAM/AnnexA
7 SC-QAM 579000000 y 0x36 256QAM/AnnexA
8 SC-QAM 587000000 y 0x36 256QAM/AnnexA
9 SC-QAM 595000000 y 0x36 256QAM/AnnexA
10 SC-QAM 603000000 y 0x36 256QAM/AnnexA
11 SC-QAM 611000000 y 0x36 256QAM/AnnexA
12 SC-QAM 619000000 y 0x36 256QAM/AnnexA
13 SC-QAM 627000000 y 0x36 256QAM/AnnexA
14 SC-QAM 635000000 y 0x36 256QAM/AnnexA
15 SC-QAM 643000000 y 0x36 256QAM/AnnexA
16 SC-QAM 651000000 y 0x36 256QAM/AnnexA
17 SC-QAM 659000000 y 0x36 256QAM/AnnexA
18 SC-QAM 667000000 y 0x36 256QAM/AnnexA
19 SC-QAM 675000000 y 0x36 256QAM/AnnexA
20 SC-QAM 683000000 y 0x36 256QAM/AnnexA
21 SC-QAM 691000000 y 0x36 256QAM/AnnexA
22 SC-QAM 699000000 y 0x36 256QAM/AnnexA
23 SC-QAM 707000000 y 0x36 256QAM/AnnexA
24 SC-QAM 715000000 y 0x36 256QAM/AnnexA
25 SC-QAM 723000000 y 0x36 256QAM/AnnexA
26 SC-QAM 731000000 y 0x36 256QAM/AnnexA
27 SC-QAM 739000000 y 0x36 256QAM/AnnexA
28 SC-QAM 747000000 y 0x36 256QAM/AnnexA
29 SC-QAM 755000000 y 0x36 256QAM/AnnexA
30 SC-QAM 763000000 y 0x36 256QAM/AnnexA
31 SC-QAM 771000000 y 0x36 256QAM/AnnexA
32 SC-QAM 779000000 y 0x36 256QAM/AnnexA
159 OFDM PLC 897000000 n 0x36 25Khz/5us/0.625us
160 OFDM PLC 361000000 n 0x36 50Khz/0.9375us/0.625us

Trimmed Downstream Ambiguity Resolution Frequency List: list size = 3

531000000-sc_qam 539000000-sc_qam 547000000-sc_qam

visible dcid set = 10

freq with visible dcid set = 603000000

BcmCmDocsisCtlMsgACT::HandleEvent() @time=2404350 event_code=11


(kCmMdDsSgDiscDone)
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=true
[00:40:04 01/01/1970] [CmDocsisCtlThread]
BcmDocsisCmHalIf::SetPrimaryDownstreamChannel: (DOCSIS CableModem HalIf)
Installing primary downstream channel index: 0
SetRatios called with primary downstream channel number = 0
AnnexMode[0] = 1 QAM_Mode[0] = 256
Num/Den = 869/1280
3390 SCDMA/OFDM mode - ChannelNumber = 0 Numerator = 869 Denominator = 1280
CM/DocsisCtl> [00:40:04 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL failed to acquire sync or lost sync!
... TCOFDM - DTR is now locked.... (T2=150ms Sync=14)

Given a 216 MHz TCOFDM clock, the nominal value for the DTR FCW is 0xC22E45067
The DTR FCW is 0xc22e909a - that value is good (5, within 100 ppm)
Kicked off the DPLL
LE Done bit was set
LE Done bit was set
SCQAM DS clock source.
PLL in Leaky mode.
PLL Fn = 6, k1 = 18, k2 = 19
[00:40:04 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context=1 (ErrorRecovery)
[00:40:04 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context is error recovery or startup.
Always use last good upstream target chan id=1
[00:40:04 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper) Locked on the downstream. Waiting for UCDs...
[00:40:04 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefFail: (Cm
Multi US Helper) target hwTxId=0
CM/DocsisCtl> [00:40:06 01/01/1970] [CmDocsisCtlThread]
BcmCmMultiUsHelper::TmUcdRxTimerEvent: (Cm Multi US Helper)
ucd gathering ok.

[00:40:06 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper) state at
entry:

Channel targeting:
Downstream:
fTargetDsFreqHz = 0 (0)
fCurrentDsFreqHz = 0x23f10cc0 (603000000)
fStoredDsFreqHz = 0x29020c00 (688000000)

Upstream:
fDestSingleTxTargetUsChanId = 0x1 (1)
fTargetingContext = 1 (ErrorRecovery)

Startup UCD Selection Info:

low priority candidate ucid list = 2 1 3 4 8 5 7 6


happy home ucid set = 1 2 3 4

Upstream Active Channel Settings:

ucid rpt enable sel prio MAP source dcid's


---- ---------- -------- -----------------
1 0x1c0 0
2 0x1c0 0
3 0x1c0 0
4 0x1c0 0
5 0x1c0 0
6 0x1c0 0
7 0x1c0 0
8 0x1c0 0

BcmCmUsTargetMset (a.k.a. usable UCDs gathered during startup):

us config
phy change ranging scdma
type ucid dcid count tried? enabled?
---- ---- ---- ------ ------- --------
3 1 10 4 n n
3 2 10 4 n n
3 3 10 4 n n
3 4 10 4 n n
3 5 10 4 n n
3 6 10 4 n n
3 7 10 4 n n
3 8 10 4 n n

[00:40:06 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper)
starting docs3 upstream initialization on target ucid=2
with upstream phy type 3 on hardware transmitter index 0

[00:40:06 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::ExecuteTccCmd: hwTxId=0


docs ucid=0
[00:40:06 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0
[00:40:06 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::InstallUsSets: Installing
UCD w/ucid for UCID=2 for CM hardware tx chan 0

[00:40:06 01/01/1970] [CmDocsisCtlThread]


BcmCmUsSetsState::TestAndLaunchUsTimeSync: starting upstream time sync
acquisition...
[00:40:06 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefOk: (Cm
Multi US Helper) target hwTxId=0
[00:40:06 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::UsTimeRefOk: upstream time
sync acquired for fHwTxId=0

== Beginning initial ranging for Docsis UCID 2 ==


Minimum transmit power is 17 dBmV
Maximum transmit power is 53 dBmV
Stored power level for UCID 2 is 38 dBmV
Using per transmitter stored initial upstream power = 38 dBmV hwTxId = 0 docsis
UCID = 2
RNG-RSP UsChanId=2 Adj: tim=1871 freq=24 Stat=Continue (CmdPwr (UsChanId-dBmV):
(2-41.00) )
[00:40:07 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0xc9
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (2-
41.00) )
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (2-
41.00) )
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (2-
41.00) )
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (2-
41.00) )
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Success (CmdPwr (UsChanId-dBmV): (2-
41.00) )
[00:40:12 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::FirstRngSuccess:
(CmDocsisCtlThread)
first RNG-RSP w/status==SUCCESS for hwTxId=0 and DOCSIS ucid=2
[00:40:12 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::LaunchEaeBpkm:
(CmDocsisCtlThread) BPKM enabled. starting Early Authentication and Encryption BPKM
key requests. Primary Sid = 201
CM/DocsisCtl> Bandwidth request failure! Status = 0

BcmCmUsChanTimerMuxACT::HandleEvent() @time=2601970 fTimerType=5


(kT4NoStationMaint) hwTxId=0 docs ucid=2
[00:43:21 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::T4NoStationMaintEvent: ERROR - no Station Maint map op error.
hwTxId=0 docs ucid=2
[00:43:21 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::CommonRngErrorHandler: reason=10 (T4NoStationMaintTimeout)
hwTxId=0 docs ucid=2
[00:43:22 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) Purging DS
frequency 603000000 from current scan pass due to pre-registration restart error
[00:43:22 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) reinit MAC #12:
T4NoStationMaintTimeout

[00:43:22 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::Reset:


(CmDocsisCtlThread) DefaultSnmpAgentClass::RestartPendingEvent for Vendor CM
Agent w/ BRCM Factory Support
Logging event: Received Response to Broadcast Maintenance Request, But no Unicast
Maintenance opportunities received - T4 time out;CM-MAC=fc:4a:e9:de:ad:88;CMTS-
MAC=28:52:61:fa:d8:78;CM-QOS=1.1;CM-VER=3.1;
Vendor CM Agent w/ BRCM Factory Support updating ifTableLastChange.
Vendor CM Agent w/ BRCM Factory Support resetting to default state.
Vendor CM Agent w/ BRCM Factory Support destroying users...
Vendor CM Agent w/ BRCM Factory Support destroying notifies...
Vendor CM Agent w/ BRCM Factory Support destroying views...
Allowing DOCS-CABLE-DEVICE-MIB IP filters.
Vendor CM Agent w/ BRCM Factory Support deferring traps.
Received RG Event 0x80000001 State 0x1
eRouter Linux WAN Down
[00:43:22 01/01/1970] [eRouterMsgPipe] eRouterMsgPipe::UpdateIpNetToMediaEntry:
(eRouterMsgPipe) eRouter IP address:0.0.0.0
00:43:22.260 01/01/1970 (CALC) mtaCmStatusInfo() - MTA is Signaled: *NOT-
OPERATIONAL* (Stat=0x1) emtaCurState = 0.
EmtaSnmpAgent::SoftReset
Pausing trap thread
emta factory agentResetting to default state.
emta factory agent destroying users...
emta factory agent destroying notifies...
emta factory agent destroying views...
emta factory agent entering RFC-2576 Coexistence security mode.
emta factory agent entering Basic/Hybrid flow provisioning mode.
Resuming trap thread
Stopping DHCP/ToD/TFTP (client requested)...
[00:43:22 01/01/1970] [CmDocsisIpThread] BcmEcosIpHalIf::RemoveIpv6Address: (IP
Stack1 HalIf) ERROR - Failed to remove IPv6 address fe80::fe4a:e9ff:fede:ad88/64
from the stack!
[00:43:22 01/01/1970] [CmDocsisIpThread] BcmDhcpV6ClientIf::ReleaseAddresses:
(DHCPv6 ClientIf for IP Stack1) ERROR - IA state is initial; there is no address to
release.
BcmDocsis3DsMacEnableMulticastDsidForwarding 0; primary DS = 0
SCQAM DSID filter control = 0x00
OFDM DSID filter control = 0x01
Deleting DOCSIS 1.0 CoS Settings for SID 0xc9
[00:43:22 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows:
(DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along
with associated Classifiers and PHS rules...
[00:43:22 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState:
(CmDocsisCtlThread)
[00:43:22 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Primary SID for usHwChannel 0 to 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 1
Updating US chan 8 data Profile test msg for Sid: 0x0.
Updating US chan 9 data Profile test msg for Sid: 0x0.
CM/DocsisCtl> [00:43:23 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL declared PULSE lost!
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=false
[00:43:23 01/01/1970] [CmDocsisCtlThread] BcmCmMultiDsHelper::PreRegDsChanChange:
target freq hz = 0
reason string = ErrorRecovery
CmInitReason = 16

Starting DS scanning...
[00:43:23 01/01/1970] [CmDocsisCtlThread] BcmCmDownstreamScan::StartScan: Starting
DS scan
Checking for cable cut...

CM/DocsisCtl> Plant power is 15.35

Cable connected
CM/DocsisCtl> Scanning 604.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 605.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 606.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 607.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 608.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 609.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 610.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 611.000 MHz SC-QAM (Annex A(Eu.1M)) locked SC-QAM
[00:43:27 01/01/1970] [CmDocsisCtlThread] BcmCmDsChan::DsLockOk: (BcmCmDsChan 0)
hwRxId=0 freq=0 dcid=0

******************************************
DOWNSTREAM STATUS
******************************************
HW Channel ID = 0
Phy type: SC-QAM
DS active chan settings:
ds chan id = 0
center freq, Hz = 611000000 Hz
primary capable = false
status event rpt bitmask = 0

CM HW Detected DS Phy Settings:


Center Freq, Hz = 611000000
QAM = Locked
FEC = Locked
Carrier Freq Offset, kHz = 0
Channel Width, Hz = 8000000
Modulation = Qam256
Interleaver = Taps12Incr17
Symbol Rate, sym/sec = 6952000

******************************************

[00:43:27 01/01/1970] [CmDocsisCtlThread]


BcmCmMacDomainSetsState::StartDsMacMddInit:
**********************************************
Waiting for MDDs...
**********************************************

CM/DocsisCtl>
BcmCmDocsisCtlMsgACT::HandleEvent() @time=2607750 event_code=4 (kCmPriDsMddSetsOk)

MDD diplexer band edge not specified.


MDD Plant US Frequency Range = extended.
Requested Spectrum = US:(0 MHz..85 MHz) DS:(0 MHz..0 MHz)
Best Match = 0: US:(5 MHz..85 MHz) DS:(108 MHz..1218 MHz)
Switchable diplexer ECN support disabled. NOT switching diplexer.
[00:43:27 01/01/1970] [CmDocsisCtlThread]
BcmCmMdDsSgDiscState::TrimSgSetWithoutThisDcid:
1 candidate MD-DS-SG remain after TrimSgSetWithoutThisDcid( target_dcid )
for target_dcid=0x0b (11)
[00:43:27 01/01/1970] [CmDocsisCtlThread] BcmCmMdDsSgDiscState::StartMdDsSgDisc:
special case: one and only one MD-DS-SG contains mdd_dcid.
fMdDsSgId=0x1d (29)
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , M-d++a+i-+Ty-eA+dA++e|:
i_L-ca+A++e|A: 1
Chec+ +D_A++e|A
Cha++e+ Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1

MD-DS-SG discovery info:

fCmMdDsSgDiscState = 6 (kMdDsSgDiscDone)
fMdDsSgId = 0x1d (29)
fMdDsSgDiscovered = true

Trimmed Candidate Downstream Service Group Settings List: list size = 1

sgid size member dcid's


---- ---- -------------
29 34 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
27 28 29 30 31 32 159 160
Downstream Active Channel Settings List:

dcid type frequency prim capable rpt enable mod/annex or PLC params
---- -------- --------- ------------ ---------- -----------------------
1 SC-QAM 531000000 y 0x36 256QAM/AnnexA
2 SC-QAM 539000000 y 0x36 256QAM/AnnexA
3 SC-QAM 547000000 y 0x36 256QAM/AnnexA
4 SC-QAM 555000000 y 0x36 256QAM/AnnexA
5 SC-QAM 563000000 y 0x36 256QAM/AnnexA
6 SC-QAM 571000000 y 0x36 256QAM/AnnexA
7 SC-QAM 579000000 y 0x36 256QAM/AnnexA
8 SC-QAM 587000000 y 0x36 256QAM/AnnexA
9 SC-QAM 595000000 y 0x36 256QAM/AnnexA
10 SC-QAM 603000000 y 0x36 256QAM/AnnexA
11 SC-QAM 611000000 y 0x36 256QAM/AnnexA
12 SC-QAM 619000000 y 0x36 256QAM/AnnexA
13 SC-QAM 627000000 y 0x36 256QAM/AnnexA
14 SC-QAM 635000000 y 0x36 256QAM/AnnexA
15 SC-QAM 643000000 y 0x36 256QAM/AnnexA
16 SC-QAM 651000000 y 0x36 256QAM/AnnexA
17 SC-QAM 659000000 y 0x36 256QAM/AnnexA
18 SC-QAM 667000000 y 0x36 256QAM/AnnexA
19 SC-QAM 675000000 y 0x36 256QAM/AnnexA
20 SC-QAM 683000000 y 0x36 256QAM/AnnexA
21 SC-QAM 691000000 y 0x36 256QAM/AnnexA
22 SC-QAM 699000000 y 0x36 256QAM/AnnexA
23 SC-QAM 707000000 y 0x36 256QAM/AnnexA
24 SC-QAM 715000000 y 0x36 256QAM/AnnexA
25 SC-QAM 723000000 y 0x36 256QAM/AnnexA
26 SC-QAM 731000000 y 0x36 256QAM/AnnexA
27 SC-QAM 739000000 y 0x36 256QAM/AnnexA
28 SC-QAM 747000000 y 0x36 256QAM/AnnexA
29 SC-QAM 755000000 y 0x36 256QAM/AnnexA
30 SC-QAM 763000000 y 0x36 256QAM/AnnexA
31 SC-QAM 771000000 y 0x36 256QAM/AnnexA
32 SC-QAM 779000000 y 0x36 256QAM/AnnexA
159 OFDM PLC 897000000 n 0x36 25Khz/5us/0.625us
160 OFDM PLC 361000000 n 0x36 50Khz/0.9375us/0.625us

Trimmed Downstream Ambiguity Resolution Frequency List: list size = 3

531000000-sc_qam 539000000-sc_qam 547000000-sc_qam

visible dcid set = 11

freq with visible dcid set = 611000000

BcmCmDocsisCtlMsgACT::HandleEvent() @time=2608350 event_code=11


(kCmMdDsSgDiscDone)
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=true
[00:43:28 01/01/1970] [CmDocsisCtlThread]
BcmDocsisCmHalIf::SetPrimaryDownstreamChannel: (DOCSIS CableModem HalIf)
Installing primary downstream channel index: 0
SetRatios called with primary downstream channel number = 0
AnnexMode[0] = 1 QAM_Mode[0] = 256
Num/Den = 869/1280
3390 SCDMA/OFDM mode - ChannelNumber = 0 Numerator = 869 Denominator = 1280
CM/DocsisCtl> [00:43:28 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL failed to acquire sync or lost sync!
... TCOFDM - DTR is now locked.... (T2=150ms Sync=14)

Given a 216 MHz TCOFDM clock, the nominal value for the DTR FCW is 0xC22E45067
The DTR FCW is 0xc22e9734 - that value is good (6, within 100 ppm)
Kicked off the DPLL
LE Done bit was set
LE Done bit was set
SCQAM DS clock source.
PLL in Leaky mode.
PLL Fn = 6, k1 = 18, k2 = 19
[00:43:28 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context=1 (ErrorRecovery)
[00:43:28 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context is error recovery or startup.
Always use last good upstream target chan id=1
[00:43:28 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper) Locked on the downstream. Waiting for UCDs...
[00:43:28 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefFail: (Cm
Multi US Helper) target hwTxId=0
CM/DocsisCtl> [00:43:30 01/01/1970] [CmDocsisCtlThread]
BcmCmMultiUsHelper::TmUcdRxTimerEvent: (Cm Multi US Helper)
ucd gathering ok.

[00:43:30 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper) state at
entry:

Channel targeting:
Downstream:
fTargetDsFreqHz = 0 (0)
fCurrentDsFreqHz = 0x246b1ec0 (611000000)
fStoredDsFreqHz = 0x29020c00 (688000000)

Upstream:
fDestSingleTxTargetUsChanId = 0x1 (1)
fTargetingContext = 1 (ErrorRecovery)

Startup UCD Selection Info:

low priority candidate ucid list = 3 4 1 2 8 7 6 5


happy home ucid set = 1 2 3 4

Upstream Active Channel Settings:

ucid rpt enable sel prio MAP source dcid's


---- ---------- -------- -----------------
1 0x1c0 0
2 0x1c0 0
3 0x1c0 0
4 0x1c0 0
5 0x1c0 0
6 0x1c0 0
7 0x1c0 0
8 0x1c0 0

BcmCmUsTargetMset (a.k.a. usable UCDs gathered during startup):

us config
phy change ranging scdma
type ucid dcid count tried? enabled?
---- ---- ---- ------ ------- --------
3 1 11 4 n n
3 2 11 4 n n
3 3 11 4 n n
3 4 11 4 n n
3 5 11 4 n n
3 6 11 4 n n
3 7 11 4 n n
3 8 11 4 n n

[00:43:30 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper)
starting docs3 upstream initialization on target ucid=3
with upstream phy type 3 on hardware transmitter index 0

[00:43:30 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::ExecuteTccCmd: hwTxId=0


docs ucid=0
[00:43:30 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0
[00:43:30 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::InstallUsSets: Installing
UCD w/ucid for UCID=3 for CM hardware tx chan 0

[00:43:30 01/01/1970] [CmDocsisCtlThread]


BcmCmUsSetsState::TestAndLaunchUsTimeSync: starting upstream time sync
acquisition...
[00:43:30 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefOk: (Cm
Multi US Helper) target hwTxId=0
[00:43:30 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::UsTimeRefOk: upstream time
sync acquired for fHwTxId=0

== Beginning initial ranging for Docsis UCID 3 ==


Minimum transmit power is 17 dBmV
Maximum transmit power is 53 dBmV
Stored power level for UCID 3 is 38 dBmV
Using per transmitter stored initial upstream power = 38 dBmV hwTxId = 0 docsis
UCID = 3
RNG-RSP UsChanId=3 Adj: tim=1859 freq=-17 Stat=Continue (CmdPwr (UsChanId-dBmV):
(3-41.25) )
[00:43:31 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0xc9
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (3-
41.75) )
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (3-
41.75) )
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (3-
41.25) )
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (3-
41.75) )
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Success (CmdPwr (UsChanId-dBmV): (3-
41.25) )
[00:43:36 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::FirstRngSuccess:
(CmDocsisCtlThread)
first RNG-RSP w/status==SUCCESS for hwTxId=0 and DOCSIS ucid=3
[00:43:36 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::LaunchEaeBpkm:
(CmDocsisCtlThread) BPKM enabled. starting Early Authentication and Encryption BPKM
key requests. Primary Sid = 201
CM/DocsisCtl> Bandwidth request failure! Status = 0

BcmCmUsChanTimerMuxACT::HandleEvent() @time=2806270 fTimerType=5


(kT4NoStationMaint) hwTxId=0 docs ucid=3
[00:46:46 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::T4NoStationMaintEvent: ERROR - no Station Maint map op error.
hwTxId=0 docs ucid=3
[00:46:46 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::CommonRngErrorHandler: reason=10 (T4NoStationMaintTimeout)
hwTxId=0 docs ucid=3
[00:46:46 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) Purging DS
frequency 611000000 from current scan pass due to pre-registration restart error
[00:46:46 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) reinit MAC #13:
T4NoStationMaintTimeout

[00:46:46 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::Reset:


(CmDocsisCtlThread) DefaultSnmpAgentClass::RestartPendingEvent for Vendor CM
Agent w/ BRCM Factory Support
Logging event: Received Response to Broadcast Maintenance Request, But no Unicast
Maintenance opportunities received - T4 time out;CM-MAC=fc:4a:e9:de:ad:88;CMTS-
MAC=28:52:61:fa:d8:78;CM-QOS=1.1;CM-VER=3.1;
Vendor CM Agent w/ BRCM Factory Support updating ifTableLastChange.
Vendor CM Agent w/ BRCM Factory Support resetting to default state.
Vendor CM Agent w/ BRCM Factory Support destroying users...
Vendor CM Agent w/ BRCM Factory Support destroying notifies...
Vendor CM Agent w/ BRCM Factory Support destroying views...
Allowing DOCS-CABLE-DEVICE-MIB IP filters.
Vendor CM Agent w/ BRCM Factory Support deferring traps.
Received RG Event 0x80000001 State 0x1
eRouter Linux WAN Down
[00:46:46 01/01/1970] [eRouterMsgPipe] eRouterMsgPipe::UpdateIpNetToMediaEntry:
(eRouterMsgPipe) eRouter IP address:0.0.0.0
00:46:46.560 01/01/1970 (CALC) mtaCmStatusInfo() - MTA is Signaled: *NOT-
OPERATIONAL* (Stat=0x1) emtaCurState = 0.
EmtaSnmpAgent::SoftReset
Pausing trap thread
emta factory agentResetting to default state.
emta factory agent destroying users...
emta factory agent destroying notifies...
emta factory agent destroying views...
emta factory agent entering RFC-2576 Coexistence security mode.
emta factory agent entering Basic/Hybrid flow provisioning mode.
Resuming trap thread
Stopping DHCP/ToD/TFTP (client requested)...
[00:46:46 01/01/1970] [CmDocsisIpThread] BcmEcosIpHalIf::RemoveIpv6Address: (IP
Stack1 HalIf) ERROR - Failed to remove IPv6 address fe80::fe4a:e9ff:fede:ad88/64
from the stack!
[00:46:46 01/01/1970] [CmDocsisIpThread] BcmDhcpV6ClientIf::ReleaseAddresses:
(DHCPv6 ClientIf for IP Stack1) ERROR - IA state is initial; there is no address to
release.
BcmDocsis3DsMacEnableMulticastDsidForwarding 0; primary DS = 0
SCQAM DSID filter control = 0x00
OFDM DSID filter control = 0x01
Deleting DOCSIS 1.0 CoS Settings for SID 0xc9
[00:46:46 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows:
(DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along
with associated Classifiers and PHS rules...
[00:46:46 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState:
(CmDocsisCtlThread)
[00:46:47 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Primary SID for usHwChannel 0 to 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 1
Updating US chan 8 data Profile test msg for Sid: 0x0.
Updating US chan 9 data Profile test msg for Sid: 0x0.
CM/DocsisCtl> [00:46:47 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL declared PULSE lost!
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=false
[00:46:47 01/01/1970] [CmDocsisCtlThread] BcmCmMultiDsHelper::PreRegDsChanChange:
target freq hz = 0
reason string = ErrorRecovery
CmInitReason = 16

Starting DS scanning...
[00:46:47 01/01/1970] [CmDocsisCtlThread] BcmCmDownstreamScan::StartScan: Starting
DS scan
Checking for cable cut...

CM/DocsisCtl> Plant power is 15.35

Cable connected

Scanning 612.000 MHz SC-QAM (Annex A(Eu.1M))


CM/DocsisCtl> Scanning 613.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 614.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 615.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 616.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 617.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 618.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 619.000 MHz SC-QAM (Annex A(Eu.1M)) locked SC-QAM
[00:46:51 01/01/1970] [CmDocsisCtlThread] BcmCmDsChan::DsLockOk: (BcmCmDsChan 0)
hwRxId=0 freq=0 dcid=0

******************************************
DOWNSTREAM STATUS
******************************************
HW Channel ID = 0
Phy type: SC-QAM
DS active chan settings:
ds chan id = 0
center freq, Hz = 619000000 Hz
primary capable = false
status event rpt bitmask = 0

CM HW Detected DS Phy Settings:


Center Freq, Hz = 619000000
QAM = Locked
FEC = Locked
Carrier Freq Offset, kHz = 0
Channel Width, Hz = 8000000
Modulation = Qam256
Interleaver = Taps12Incr17
Symbol Rate, sym/sec = 6952000

******************************************

[00:46:51 01/01/1970] [CmDocsisCtlThread]


BcmCmMacDomainSetsState::StartDsMacMddInit:
**********************************************
Waiting for MDDs...
**********************************************

CM/DocsisCtl>
BcmCmDocsisCtlMsgACT::HandleEvent() @time=2811750 event_code=4 (kCmPriDsMddSetsOk)

MDD diplexer band edge not specified.


MDD Plant US Frequency Range = extended.
Requested Spectrum = US:(0 MHz..85 MHz) DS:(0 MHz..0 MHz)
Best Match = 0: US:(5 MHz..85 MHz) DS:(108 MHz..1218 MHz)
Switchable diplexer ECN support disabled. NOT switching diplexer.
[00:46:51 01/01/1970] [CmDocsisCtlThread]
BcmCmMdDsSgDiscState::TrimSgSetWithoutThisDcid:
1 candidate MD-DS-SG remain after TrimSgSetWithoutThisDcid( target_dcid )
for target_dcid=0x0c (12)
[00:46:51 01/01/1970] [CmDocsisCtlThread] BcmCmMdDsSgDiscState::StartMdDsSgDisc:
special case: one and only one MD-DS-SG contains mdd_dcid.
fMdDsSgId=0x1d (29)
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , M-d++a+i-+Ty-eA+dA++e|:
i_L-ca+A++e|A: 1
Chec+ +D_A++e|A
Cha++e+ Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1

MD-DS-SG discovery info:

fCmMdDsSgDiscState = 6 (kMdDsSgDiscDone)
fMdDsSgId = 0x1d (29)
fMdDsSgDiscovered = true

Trimmed Candidate Downstream Service Group Settings List: list size = 1

sgid size member dcid's


---- ---- -------------
29 34 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
27 28 29 30 31 32 159 160

Downstream Active Channel Settings List:

dcid type frequency prim capable rpt enable mod/annex or PLC params
---- -------- --------- ------------ ---------- -----------------------
1 SC-QAM 531000000 y 0x36 256QAM/AnnexA
2 SC-QAM 539000000 y 0x36 256QAM/AnnexA
3 SC-QAM 547000000 y 0x36 256QAM/AnnexA
4 SC-QAM 555000000 y 0x36 256QAM/AnnexA
5 SC-QAM 563000000 y 0x36 256QAM/AnnexA
6 SC-QAM 571000000 y 0x36 256QAM/AnnexA
7 SC-QAM 579000000 y 0x36 256QAM/AnnexA
8 SC-QAM 587000000 y 0x36 256QAM/AnnexA
9 SC-QAM 595000000 y 0x36 256QAM/AnnexA
10 SC-QAM 603000000 y 0x36 256QAM/AnnexA
11 SC-QAM 611000000 y 0x36 256QAM/AnnexA
12 SC-QAM 619000000 y 0x36 256QAM/AnnexA
13 SC-QAM 627000000 y 0x36 256QAM/AnnexA
14 SC-QAM 635000000 y 0x36 256QAM/AnnexA
15 SC-QAM 643000000 y 0x36 256QAM/AnnexA
16 SC-QAM 651000000 y 0x36 256QAM/AnnexA
17 SC-QAM 659000000 y 0x36 256QAM/AnnexA
18 SC-QAM 667000000 y 0x36 256QAM/AnnexA
19 SC-QAM 675000000 y 0x36 256QAM/AnnexA
20 SC-QAM 683000000 y 0x36 256QAM/AnnexA
21 SC-QAM 691000000 y 0x36 256QAM/AnnexA
22 SC-QAM 699000000 y 0x36 256QAM/AnnexA
23 SC-QAM 707000000 y 0x36 256QAM/AnnexA
24 SC-QAM 715000000 y 0x36 256QAM/AnnexA
25 SC-QAM 723000000 y 0x36 256QAM/AnnexA
26 SC-QAM 731000000 y 0x36 256QAM/AnnexA
27 SC-QAM 739000000 y 0x36 256QAM/AnnexA
28 SC-QAM 747000000 y 0x36 256QAM/AnnexA
29 SC-QAM 755000000 y 0x36 256QAM/AnnexA
30 SC-QAM 763000000 y 0x36 256QAM/AnnexA
31 SC-QAM 771000000 y 0x36 256QAM/AnnexA
32 SC-QAM 779000000 y 0x36 256QAM/AnnexA
159 OFDM PLC 897000000 n 0x36 25Khz/5us/0.625us
160 OFDM PLC 361000000 n 0x36 50Khz/0.9375us/0.625us

Trimmed Downstream Ambiguity Resolution Frequency List: list size = 3

531000000-sc_qam 539000000-sc_qam 547000000-sc_qam

visible dcid set = 12

freq with visible dcid set = 619000000

BcmCmDocsisCtlMsgACT::HandleEvent() @time=2812350 event_code=11


(kCmMdDsSgDiscDone)
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=true
[00:46:52 01/01/1970] [CmDocsisCtlThread]
BcmDocsisCmHalIf::SetPrimaryDownstreamChannel: (DOCSIS CableModem HalIf)
Installing primary downstream channel index: 0
SetRatios called with primary downstream channel number = 0
AnnexMode[0] = 1 QAM_Mode[0] = 256
Num/Den = 869/1280
3390 SCDMA/OFDM mode - ChannelNumber = 0 Numerator = 869 Denominator = 1280
CM/DocsisCtl> [00:46:52 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL failed to acquire sync or lost sync!
... TCOFDM - DTR is now locked.... (T2=150ms Sync=14)

Given a 216 MHz TCOFDM clock, the nominal value for the DTR FCW is 0xC22E45067
The DTR FCW is 0xc22eb3bd - that value is good (8, within 100 ppm)
Kicked off the DPLL
LE Done bit was set
LE Done bit was set
SCQAM DS clock source.
PLL in Leaky mode.
PLL Fn = 6, k1 = 18, k2 = 19
[00:46:52 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context=1 (ErrorRecovery)
[00:46:52 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context is error recovery or startup.
Always use last good upstream target chan id=1
[00:46:52 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper) Locked on the downstream. Waiting for UCDs...
[00:46:52 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefFail: (Cm
Multi US Helper) target hwTxId=0
CM/DocsisCtl> [00:46:54 01/01/1970] [CmDocsisCtlThread]
BcmCmMultiUsHelper::TmUcdRxTimerEvent: (Cm Multi US Helper)
ucd gathering ok.

[00:46:54 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper) state at
entry:

Channel targeting:
Downstream:
fTargetDsFreqHz = 0 (0)
fCurrentDsFreqHz = 0x24e530c0 (619000000)
fStoredDsFreqHz = 0x29020c00 (688000000)

Upstream:
fDestSingleTxTargetUsChanId = 0x1 (1)
fTargetingContext = 1 (ErrorRecovery)

Startup UCD Selection Info:

low priority candidate ucid list = 3 1 4 2 6 8 7 5


happy home ucid set = 1 2 3 4

Upstream Active Channel Settings:

ucid rpt enable sel prio MAP source dcid's


---- ---------- -------- -----------------
1 0x1c0 0
2 0x1c0 0
3 0x1c0 0
4 0x1c0 0
5 0x1c0 0
6 0x1c0 0
7 0x1c0 0
8 0x1c0 0

BcmCmUsTargetMset (a.k.a. usable UCDs gathered during startup):

us config
phy change ranging scdma
type ucid dcid count tried? enabled?
---- ---- ---- ------ ------- --------
3 1 12 4 n n
3 2 12 4 n n
3 3 12 4 n n
3 4 12 4 n n
3 5 12 4 n n
3 6 12 4 n n
3 7 12 4 n n
3 8 12 4 n n

[00:46:54 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper)
starting docs3 upstream initialization on target ucid=3
with upstream phy type 3 on hardware transmitter index 0

[00:46:54 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::ExecuteTccCmd: hwTxId=0


docs ucid=0
[00:46:54 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0
[00:46:54 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::InstallUsSets: Installing
UCD w/ucid for UCID=3 for CM hardware tx chan 0

[00:46:54 01/01/1970] [CmDocsisCtlThread]


BcmCmUsSetsState::TestAndLaunchUsTimeSync: starting upstream time sync
acquisition...
[00:46:54 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefOk: (Cm
Multi US Helper) target hwTxId=0
[00:46:54 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::UsTimeRefOk: upstream time
sync acquired for fHwTxId=0

== Beginning initial ranging for Docsis UCID 3 ==


Minimum transmit power is 17 dBmV
Maximum transmit power is 53 dBmV
Stored power level for UCID 3 is 38 dBmV
Using per transmitter stored initial upstream power = 38 dBmV hwTxId = 0 docsis
UCID = 3
RNG-RSP UsChanId=3 Adj: tim=1875 freq=-36 Stat=Continue (CmdPwr (UsChanId-dBmV):
(3-41.25) )
[00:46:55 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0xc9
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (3-
41.75) )
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (3-
41.25) )
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (3-
41.75) )
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (3-
41.25) )
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Success (CmdPwr (UsChanId-dBmV): (3-
41.75) )
[00:47:00 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::FirstRngSuccess:
(CmDocsisCtlThread)
first RNG-RSP w/status==SUCCESS for hwTxId=0 and DOCSIS ucid=3
[00:47:00 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::LaunchEaeBpkm:
(CmDocsisCtlThread) BPKM enabled. starting Early Authentication and Encryption BPKM
key requests. Primary Sid = 201
CM/DocsisCtl> Bandwidth request failure! Status = 0

BcmCmUsChanTimerMuxACT::HandleEvent() @time=3010290 fTimerType=5


(kT4NoStationMaint) hwTxId=0 docs ucid=3
[00:50:10 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::T4NoStationMaintEvent: ERROR - no Station Maint map op error.
hwTxId=0 docs ucid=3
[00:50:10 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::CommonRngErrorHandler: reason=10 (T4NoStationMaintTimeout)
hwTxId=0 docs ucid=3
[00:50:10 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) Purging DS
frequency 619000000 from current scan pass due to pre-registration restart error
[00:50:10 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) reinit MAC #14:
T4NoStationMaintTimeout

[00:50:10 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::Reset:


(CmDocsisCtlThread) DefaultSnmpAgentClass::RestartPendingEvent for Vendor CM
Agent w/ BRCM Factory Support
Logging event: Received Response to Broadcast Maintenance Request, But no Unicast
Maintenance opportunities received - T4 time out;CM-MAC=fc:4a:e9:de:ad:88;CMTS-
MAC=28:52:61:fa:d8:78;CM-QOS=1.1;CM-VER=3.1;
Vendor CM Agent w/ BRCM Factory Support updating ifTableLastChange.
Vendor CM Agent w/ BRCM Factory Support resetting to default state.
Vendor CM Agent w/ BRCM Factory Support destroying users...
Vendor CM Agent w/ BRCM Factory Support destroying notifies...
Vendor CM Agent w/ BRCM Factory Support destroying views...
Allowing DOCS-CABLE-DEVICE-MIB IP filters.
Vendor CM Agent w/ BRCM Factory Support deferring traps.
Received RG Event 0x80000001 State 0x1
eRouter Linux WAN Down
[00:50:10 01/01/1970] [eRouterMsgPipe] eRouterMsgPipe::UpdateIpNetToMediaEntry:
(eRouterMsgPipe) eRouter IP address:0.0.0.0
00:50:10.580 01/01/1970 (CALC) mtaCmStatusInfo() - MTA is Signaled: *NOT-
OPERATIONAL* (Stat=0x1) emtaCurState = 0.
EmtaSnmpAgent::SoftReset
Pausing trap thread
emta factory agentResetting to default state.
emta factory agent destroying users...
emta factory agent destroying notifies...
emta factory agent destroying views...
emta factory agent entering RFC-2576 Coexistence security mode.
emta factory agent entering Basic/Hybrid flow provisioning mode.
Resuming trap thread
Stopping DHCP/ToD/TFTP (client requested)...
[00:50:10 01/01/1970] [CmDocsisIpThread] BcmEcosIpHalIf::RemoveIpv6Address: (IP
Stack1 HalIf) ERROR - Failed to remove IPv6 address fe80::fe4a:e9ff:fede:ad88/64
from the stack!
[00:50:10 01/01/1970] [CmDocsisIpThread] BcmDhcpV6ClientIf::ReleaseAddresses:
(DHCPv6 ClientIf for IP Stack1) ERROR - IA state is initial; there is no address to
release.
BcmDocsis3DsMacEnableMulticastDsidForwarding 0; primary DS = 0
SCQAM DSID filter control = 0x00
OFDM DSID filter control = 0x01
Deleting DOCSIS 1.0 CoS Settings for SID 0xc9
[00:50:10 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows:
(DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along
with associated Classifiers and PHS rules...
[00:50:11 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState:
(CmDocsisCtlThread)
[00:50:11 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Primary SID for usHwChannel 0 to 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 1
Updating US chan 8 data Profile test msg for Sid: 0x0.
Updating US chan 9 data Profile test msg for Sid: 0x0.
CM/DocsisCtl> [00:50:11 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL declared PULSE lost!
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=false
[00:50:11 01/01/1970] [CmDocsisCtlThread] BcmCmMultiDsHelper::PreRegDsChanChange:
target freq hz = 0
reason string = ErrorRecovery
CmInitReason = 16

Starting DS scanning...
[00:50:11 01/01/1970] [CmDocsisCtlThread] BcmCmDownstreamScan::StartScan: Starting
DS scan
Checking for cable cut...

CM/DocsisCtl> Plant power is 15.45

Cable connected

CM/DocsisCtl> Scanning 620.000 MHz SC-QAM (Annex A(Eu.1M))


Scanning 621.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 622.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 623.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 624.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 625.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 626.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 627.000 MHz SC-QAM (Annex A(Eu.1M)) locked SC-QAM
[00:50:14 01/01/1970] [CmDocsisCtlThread] BcmCmDsChan::DsLockOk: (BcmCmDsChan 0)
hwRxId=0 freq=0 dcid=0

******************************************
DOWNSTREAM STATUS
******************************************
HW Channel ID = 0
Phy type: SC-QAM
DS active chan settings:
ds chan id = 0
center freq, Hz = 627000000 Hz
primary capable = false
status event rpt bitmask = 0

CM HW Detected DS Phy Settings:


Center Freq, Hz = 627000000
QAM = Locked
FEC = Locked
Carrier Freq Offset, kHz = 0
Channel Width, Hz = 8000000
Modulation = Qam256
Interleaver = Taps12Incr17
Symbol Rate, sym/sec = 6952000

******************************************

[00:50:14 01/01/1970] [CmDocsisCtlThread]


BcmCmMacDomainSetsState::StartDsMacMddInit:
**********************************************
Waiting for MDDs...
**********************************************

CM/DocsisCtl>
BcmCmDocsisCtlMsgACT::HandleEvent() @time=3015750 event_code=4 (kCmPriDsMddSetsOk)

MDD diplexer band edge not specified.


MDD Plant US Frequency Range = extended.
Requested Spectrum = US:(0 MHz..85 MHz) DS:(0 MHz..0 MHz)
Best Match = 0: US:(5 MHz..85 MHz) DS:(108 MHz..1218 MHz)
Switchable diplexer ECN support disabled. NOT switching diplexer.
[00:50:15 01/01/1970] [CmDocsisCtlThread]
BcmCmMdDsSgDiscState::TrimSgSetWithoutThisDcid:
1 candidate MD-DS-SG remain after TrimSgSetWithoutThisDcid( target_dcid )
for target_dcid=0x0d (13)
[00:50:15 01/01/1970] [CmDocsisCtlThread] BcmCmMdDsSgDiscState::StartMdDsSgDisc:
special case: one and only one MD-DS-SG contains mdd_dcid.
fMdDsSgId=0x1d (29)
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , M-d++a+i-+Ty-eA+dA++e|:
i_L-ca+A++e|A: 1
Chec+ +D_A++e|A
Cha++e+ Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1

MD-DS-SG discovery info:

fCmMdDsSgDiscState = 6 (kMdDsSgDiscDone)
fMdDsSgId = 0x1d (29)
fMdDsSgDiscovered = true

Trimmed Candidate Downstream Service Group Settings List: list size = 1


sgid size member dcid's
---- ---- -------------
29 34 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
27 28 29 30 31 32 159 160

Downstream Active Channel Settings List:

dcid type frequency prim capable rpt enable mod/annex or PLC params
---- -------- --------- ------------ ---------- -----------------------
1 SC-QAM 531000000 y 0x36 256QAM/AnnexA
2 SC-QAM 539000000 y 0x36 256QAM/AnnexA
3 SC-QAM 547000000 y 0x36 256QAM/AnnexA
4 SC-QAM 555000000 y 0x36 256QAM/AnnexA
5 SC-QAM 563000000 y 0x36 256QAM/AnnexA
6 SC-QAM 571000000 y 0x36 256QAM/AnnexA
7 SC-QAM 579000000 y 0x36 256QAM/AnnexA
8 SC-QAM 587000000 y 0x36 256QAM/AnnexA
9 SC-QAM 595000000 y 0x36 256QAM/AnnexA
10 SC-QAM 603000000 y 0x36 256QAM/AnnexA
11 SC-QAM 611000000 y 0x36 256QAM/AnnexA
12 SC-QAM 619000000 y 0x36 256QAM/AnnexA
13 SC-QAM 627000000 y 0x36 256QAM/AnnexA
14 SC-QAM 635000000 y 0x36 256QAM/AnnexA
15 SC-QAM 643000000 y 0x36 256QAM/AnnexA
16 SC-QAM 651000000 y 0x36 256QAM/AnnexA
17 SC-QAM 659000000 y 0x36 256QAM/AnnexA
18 SC-QAM 667000000 y 0x36 256QAM/AnnexA
19 SC-QAM 675000000 y 0x36 256QAM/AnnexA
20 SC-QAM 683000000 y 0x36 256QAM/AnnexA
21 SC-QAM 691000000 y 0x36 256QAM/AnnexA
22 SC-QAM 699000000 y 0x36 256QAM/AnnexA
23 SC-QAM 707000000 y 0x36 256QAM/AnnexA
24 SC-QAM 715000000 y 0x36 256QAM/AnnexA
25 SC-QAM 723000000 y 0x36 256QAM/AnnexA
26 SC-QAM 731000000 y 0x36 256QAM/AnnexA
27 SC-QAM 739000000 y 0x36 256QAM/AnnexA
28 SC-QAM 747000000 y 0x36 256QAM/AnnexA
29 SC-QAM 755000000 y 0x36 256QAM/AnnexA
30 SC-QAM 763000000 y 0x36 256QAM/AnnexA
31 SC-QAM 771000000 y 0x36 256QAM/AnnexA
32 SC-QAM 779000000 y 0x36 256QAM/AnnexA
159 OFDM PLC 897000000 n 0x36 25Khz/5us/0.625us
160 OFDM PLC 361000000 n 0x36 50Khz/0.9375us/0.625us

Trimmed Downstream Ambiguity Resolution Frequency List: list size = 3

531000000-sc_qam 539000000-sc_qam 547000000-sc_qam

visible dcid set = 13

freq with visible dcid set = 627000000

BcmCmDocsisCtlMsgACT::HandleEvent() @time=3016350 event_code=11


(kCmMdDsSgDiscDone)
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=true
[00:50:16 01/01/1970] [CmDocsisCtlThread]
BcmDocsisCmHalIf::SetPrimaryDownstreamChannel: (DOCSIS CableModem HalIf)
Installing primary downstream channel index: 0
SetRatios called with primary downstream channel number = 0
AnnexMode[0] = 1 QAM_Mode[0] = 256
Num/Den = 869/1280
3390 SCDMA/OFDM mode - ChannelNumber = 0 Numerator = 869 Denominator = 1280
CM/DocsisCtl> [00:50:16 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL failed to acquire sync or lost sync!
... TCOFDM - DTR is now locked.... (T2=150ms Sync=14)

Given a 216 MHz TCOFDM clock, the nominal value for the DTR FCW is 0xC22E45067
The DTR FCW is 0xc22ea119 - that value is good (7, within 100 ppm)
Kicked off the DPLL
LE Done bit was set
LE Done bit was set
SCQAM DS clock source.
PLL in Leaky mode.
PLL Fn = 6, k1 = 18, k2 = 19
[00:50:16 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context=1 (ErrorRecovery)
[00:50:16 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context is error recovery or startup.
Always use last good upstream target chan id=1
[00:50:16 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper) Locked on the downstream. Waiting for UCDs...
[00:50:16 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefFail: (Cm
Multi US Helper) target hwTxId=0
CM/DocsisCtl> [00:50:18 01/01/1970] [CmDocsisCtlThread]
BcmCmMultiUsHelper::TmUcdRxTimerEvent: (Cm Multi US Helper)
ucd gathering ok.

[00:50:18 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper) state at
entry:

Channel targeting:
Downstream:
fTargetDsFreqHz = 0 (0)
fCurrentDsFreqHz = 0x255f42c0 (627000000)
fStoredDsFreqHz = 0x29020c00 (688000000)

Upstream:
fDestSingleTxTargetUsChanId = 0x1 (1)
fTargetingContext = 1 (ErrorRecovery)

Startup UCD Selection Info:

low priority candidate ucid list = 2 3 4 1 7 8 5 6


happy home ucid set = 1 2 3 4

Upstream Active Channel Settings:

ucid rpt enable sel prio MAP source dcid's


---- ---------- -------- -----------------
1 0x1c0 0
2 0x1c0 0
3 0x1c0 0
4 0x1c0 0
5 0x1c0 0
6 0x1c0 0
7 0x1c0 0
8 0x1c0 0

BcmCmUsTargetMset (a.k.a. usable UCDs gathered during startup):

us config
phy change ranging scdma
type ucid dcid count tried? enabled?
---- ---- ---- ------ ------- --------
3 1 13 4 n n
3 2 13 4 n n
3 3 13 4 n n
3 4 13 4 n n
3 5 13 4 n n
3 6 13 4 n n
3 7 13 4 n n
3 8 13 4 n n

[00:50:18 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper)
starting docs3 upstream initialization on target ucid=2
with upstream phy type 3 on hardware transmitter index 0

[00:50:18 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::ExecuteTccCmd: hwTxId=0


docs ucid=0
[00:50:18 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0
[00:50:18 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::InstallUsSets: Installing
UCD w/ucid for UCID=2 for CM hardware tx chan 0

[00:50:18 01/01/1970] [CmDocsisCtlThread]


BcmCmUsSetsState::TestAndLaunchUsTimeSync: starting upstream time sync
acquisition...
[00:50:18 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefOk: (Cm
Multi US Helper) target hwTxId=0
[00:50:18 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::UsTimeRefOk: upstream time
sync acquired for fHwTxId=0

== Beginning initial ranging for Docsis UCID 2 ==


Minimum transmit power is 17 dBmV
Maximum transmit power is 53 dBmV
Stored power level for UCID 2 is 38 dBmV
Using per transmitter stored initial upstream power = 38 dBmV hwTxId = 0 docsis
UCID = 2
RNG-RSP UsChanId=2 Adj: tim=1905 freq=-12 Stat=Continue (CmdPwr (UsChanId-dBmV):
(2-41.00) )
[00:50:19 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0xc9
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (2-
41.00) )
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (2-
41.00) )
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (2-
41.00) )
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (2-
41.00) )
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Success (CmdPwr (UsChanId-dBmV): (2-
41.00) )
[00:50:24 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::FirstRngSuccess:
(CmDocsisCtlThread)
first RNG-RSP w/status==SUCCESS for hwTxId=0 and DOCSIS ucid=2
[00:50:24 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::LaunchEaeBpkm:
(CmDocsisCtlThread) BPKM enabled. starting Early Authentication and Encryption BPKM
key requests. Primary Sid = 201
CM/DocsisCtl> Bandwidth request failure! Status = 0

BcmCmUsChanTimerMuxACT::HandleEvent() @time=3213810 fTimerType=5


(kT4NoStationMaint) hwTxId=0 docs ucid=2
[00:53:33 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::T4NoStationMaintEvent: ERROR - no Station Maint map op error.
hwTxId=0 docs ucid=2
[00:53:33 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::CommonRngErrorHandler: reason=10 (T4NoStationMaintTimeout)
hwTxId=0 docs ucid=2
[00:53:33 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) Purging DS
frequency 627000000 from current scan pass due to pre-registration restart error
[00:53:33 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) reinit MAC #15:
T4NoStationMaintTimeout

[00:53:33 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::Reset:


(CmDocsisCtlThread) DefaultSnmpAgentClass::RestartPendingEvent for Vendor CM
Agent w/ BRCM Factory Support
Logging event: Received Response to Broadcast Maintenance Request, But no Unicast
Maintenance opportunities received - T4 time out;CM-MAC=fc:4a:e9:de:ad:88;CMTS-
MAC=28:52:61:fa:d8:78;CM-QOS=1.1;CM-VER=3.1;
Vendor CM Agent w/ BRCM Factory Support updating ifTableLastChange.
Vendor CM Agent w/ BRCM Factory Support resetting to default state.
Vendor CM Agent w/ BRCM Factory Support destroying users...
Vendor CM Agent w/ BRCM Factory Support destroying notifies...
Vendor CM Agent w/ BRCM Factory Support destroying views...
Allowing DOCS-CABLE-DEVICE-MIB IP filters.
Vendor CM Agent w/ BRCM Factory Support deferring traps.
CM/DocsisCtl> Received RG Event 0x80000001 State 0x1
eRouter Linux WAN Down
[00:53:34 01/01/1970] [eRouterMsgPipe] eRouterMsgPipe::UpdateIpNetToMediaEntry:
(eRouterMsgPipe) eRouter IP address:0.0.0.0
00:53:34.100 01/01/1970 (CALC) mtaCmStatusInfo() - MTA is Signaled: *NOT-
OPERATIONAL* (Stat=0x1) emtaCurState = 0.
EmtaSnmpAgent::SoftReset
Pausing trap thread
emta factory agentResetting to default state.
emta factory agent destroying users...
emta factory agent destroying notifies...
emta factory agent destroying views...
emta factory agent entering RFC-2576 Coexistence security mode.
emta factory agent entering Basic/Hybrid flow provisioning mode.
Resuming trap thread
Stopping DHCP/ToD/TFTP (client requested)...
[00:53:34 01/01/1970] [CmDocsisIpThread] BcmEcosIpHalIf::RemoveIpv6Address: (IP
Stack1 HalIf) ERROR - Failed to remove IPv6 address fe80::fe4a:e9ff:fede:ad88/64
from the stack!
[00:53:34 01/01/1970] [CmDocsisIpThread] BcmDhcpV6ClientIf::ReleaseAddresses:
(DHCPv6 ClientIf for IP Stack1) ERROR - IA state is initial; there is no address to
release.
BcmDocsis3DsMacEnableMulticastDsidForwarding 0; primary DS = 0
SCQAM DSID filter control = 0x00
OFDM DSID filter control = 0x01
CM/DocsisCtl> Deleting DOCSIS 1.0 CoS Settings for SID 0xc9
[00:53:34 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows:
(DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along
with associated Classifiers and PHS rules...
[00:53:34 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState:
(CmDocsisCtlThread)
[00:53:34 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Primary SID for usHwChannel 0 to 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 1
Updating US chan 8 data Profile test msg for Sid: 0x0.
Updating US chan 9 data Profile test msg for Sid: 0x0.
CM/DocsisCtl> [00:53:35 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL declared PULSE lost!
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=false
[00:53:35 01/01/1970] [CmDocsisCtlThread] BcmCmMultiDsHelper::PreRegDsChanChange:
target freq hz = 0
reason string = ErrorRecovery
CmInitReason = 16

Starting DS scanning...
[00:53:35 01/01/1970] [CmDocsisCtlThread] BcmCmDownstreamScan::StartScan: Starting
DS scan
Checking for cable cut...

CM/DocsisCtl> Plant power is 15.55

Cable connected

CM/DocsisCtl> Scanning 628.000 MHz SC-QAM (Annex A(Eu.1M))


Scanning 629.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 630.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 631.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 632.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 633.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 634.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 635.000 MHz SC-QAM (Annex A(Eu.1M)) locked SC-QAM
[00:53:38 01/01/1970] [CmDocsisCtlThread] BcmCmDsChan::DsLockOk: (BcmCmDsChan 0)
hwRxId=0 freq=0 dcid=0

******************************************
DOWNSTREAM STATUS
******************************************
HW Channel ID = 0
Phy type: SC-QAM
DS active chan settings:
ds chan id = 0
center freq, Hz = 635000000 Hz
primary capable = false
status event rpt bitmask = 0

CM HW Detected DS Phy Settings:


Center Freq, Hz = 635000000
QAM = Locked
FEC = Locked
Carrier Freq Offset, kHz = 0
Channel Width, Hz = 8000000
Modulation = Qam256
Interleaver = Taps12Incr17
Symbol Rate, sym/sec = 6952000

******************************************

[00:53:38 01/01/1970] [CmDocsisCtlThread]


BcmCmMacDomainSetsState::StartDsMacMddInit:
**********************************************
Waiting for MDDs...
**********************************************

CM/DocsisCtl>
BcmCmDocsisCtlMsgACT::HandleEvent() @time=3219750 event_code=4 (kCmPriDsMddSetsOk)

MDD diplexer band edge not specified.


MDD Plant US Frequency Range = extended.
Requested Spectrum = US:(0 MHz..85 MHz) DS:(0 MHz..0 MHz)
Best Match = 0: US:(5 MHz..85 MHz) DS:(108 MHz..1218 MHz)
Switchable diplexer ECN support disabled. NOT switching diplexer.
[00:53:39 01/01/1970] [CmDocsisCtlThread]
BcmCmMdDsSgDiscState::TrimSgSetWithoutThisDcid:
1 candidate MD-DS-SG remain after TrimSgSetWithoutThisDcid( target_dcid )
for target_dcid=0x0e (14)
[00:53:39 01/01/1970] [CmDocsisCtlThread] BcmCmMdDsSgDiscState::StartMdDsSgDisc:
special case: one and only one MD-DS-SG contains mdd_dcid.
fMdDsSgId=0x1d (29)
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , M-d++a+i-+Ty-eA+dA++e|:
i_L-ca+A++e|A: 1
Chec+ +D_A++e|A
Cha++e+ Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1

MD-DS-SG discovery info:

fCmMdDsSgDiscState = 6 (kMdDsSgDiscDone)
fMdDsSgId = 0x1d (29)
fMdDsSgDiscovered = true

Trimmed Candidate Downstream Service Group Settings List: list size = 1

sgid size member dcid's


---- ---- -------------
29 34 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
27 28 29 30 31 32 159 160

Downstream Active Channel Settings List:

dcid type frequency prim capable rpt enable mod/annex or PLC params
---- -------- --------- ------------ ---------- -----------------------
1 SC-QAM 531000000 y 0x36 256QAM/AnnexA
2 SC-QAM 539000000 y 0x36 256QAM/AnnexA
3 SC-QAM 547000000 y 0x36 256QAM/AnnexA
4 SC-QAM 555000000 y 0x36 256QAM/AnnexA
5 SC-QAM 563000000 y 0x36 256QAM/AnnexA
6 SC-QAM 571000000 y 0x36 256QAM/AnnexA
7 SC-QAM 579000000 y 0x36 256QAM/AnnexA
8 SC-QAM 587000000 y 0x36 256QAM/AnnexA
9 SC-QAM 595000000 y 0x36 256QAM/AnnexA
10 SC-QAM 603000000 y 0x36 256QAM/AnnexA
11 SC-QAM 611000000 y 0x36 256QAM/AnnexA
12 SC-QAM 619000000 y 0x36 256QAM/AnnexA
13 SC-QAM 627000000 y 0x36 256QAM/AnnexA
14 SC-QAM 635000000 y 0x36 256QAM/AnnexA
15 SC-QAM 643000000 y 0x36 256QAM/AnnexA
16 SC-QAM 651000000 y 0x36 256QAM/AnnexA
17 SC-QAM 659000000 y 0x36 256QAM/AnnexA
18 SC-QAM 667000000 y 0x36 256QAM/AnnexA
19 SC-QAM 675000000 y 0x36 256QAM/AnnexA
20 SC-QAM 683000000 y 0x36 256QAM/AnnexA
21 SC-QAM 691000000 y 0x36 256QAM/AnnexA
22 SC-QAM 699000000 y 0x36 256QAM/AnnexA
23 SC-QAM 707000000 y 0x36 256QAM/AnnexA
24 SC-QAM 715000000 y 0x36 256QAM/AnnexA
25 SC-QAM 723000000 y 0x36 256QAM/AnnexA
26 SC-QAM 731000000 y 0x36 256QAM/AnnexA
27 SC-QAM 739000000 y 0x36 256QAM/AnnexA
28 SC-QAM 747000000 y 0x36 256QAM/AnnexA
29 SC-QAM 755000000 y 0x36 256QAM/AnnexA
30 SC-QAM 763000000 y 0x36 256QAM/AnnexA
31 SC-QAM 771000000 y 0x36 256QAM/AnnexA
32 SC-QAM 779000000 y 0x36 256QAM/AnnexA
159 OFDM PLC 897000000 n 0x36 25Khz/5us/0.625us
160 OFDM PLC 361000000 n 0x36 50Khz/0.9375us/0.625us

Trimmed Downstream Ambiguity Resolution Frequency List: list size = 3

531000000-sc_qam 539000000-sc_qam 547000000-sc_qam

visible dcid set = 14

freq with visible dcid set = 635000000

BcmCmDocsisCtlMsgACT::HandleEvent() @time=3220350 event_code=11


(kCmMdDsSgDiscDone)
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=true
[00:53:40 01/01/1970] [CmDocsisCtlThread]
BcmDocsisCmHalIf::SetPrimaryDownstreamChannel: (DOCSIS CableModem HalIf)
Installing primary downstream channel index: 0
SetRatios called with primary downstream channel number = 0
AnnexMode[0] = 1 QAM_Mode[0] = 256
Num/Den = 869/1280
3390 SCDMA/OFDM mode - ChannelNumber = 0 Numerator = 869 Denominator = 1280
CM/DocsisCtl> [00:53:40 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL failed to acquire sync or lost sync!
... TCOFDM - DTR is now locked.... (T2=150ms Sync=14)

Given a 216 MHz TCOFDM clock, the nominal value for the DTR FCW is 0xC22E45067
The DTR FCW is 0xc22eaed9 - that value is good (8, within 100 ppm)
Kicked off the DPLL
LE Done bit was set
LE Done bit was set
SCQAM DS clock source.
PLL in Leaky mode.
PLL Fn = 6, k1 = 18, k2 = 19
[00:53:40 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context=1 (ErrorRecovery)
[00:53:40 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context is error recovery or startup.
Always use last good upstream target chan id=1
[00:53:40 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper) Locked on the downstream. Waiting for UCDs...
[00:53:40 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefFail: (Cm
Multi US Helper) target hwTxId=0
CM/DocsisCtl> [00:53:42 01/01/1970] [CmDocsisCtlThread]
BcmCmMultiUsHelper::TmUcdRxTimerEvent: (Cm Multi US Helper)
ucd gathering ok.

[00:53:42 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper) state at
entry:

Channel targeting:
Downstream:
fTargetDsFreqHz = 0 (0)
fCurrentDsFreqHz = 0x25d954c0 (635000000)
fStoredDsFreqHz = 0x29020c00 (688000000)

Upstream:
fDestSingleTxTargetUsChanId = 0x1 (1)
fTargetingContext = 1 (ErrorRecovery)

Startup UCD Selection Info:

low priority candidate ucid list = 2 1 3 4 6 7 8 5


happy home ucid set = 1 2 3 4

Upstream Active Channel Settings:

ucid rpt enable sel prio MAP source dcid's


---- ---------- -------- -----------------
1 0x1c0 0
2 0x1c0 0
3 0x1c0 0
4 0x1c0 0
5 0x1c0 0
6 0x1c0 0
7 0x1c0 0
8 0x1c0 0

BcmCmUsTargetMset (a.k.a. usable UCDs gathered during startup):

us config
phy change ranging scdma
type ucid dcid count tried? enabled?
---- ---- ---- ------ ------- --------
3 1 14 4 n n
3 2 14 4 n n
3 3 14 4 n n
3 4 14 4 n n
3 5 14 4 n n
3 6 14 4 n n
3 7 14 4 n n
3 8 14 4 n n
[00:53:42 01/01/1970] [CmDocsisCtlThread]
BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper)
starting docs3 upstream initialization on target ucid=2
with upstream phy type 3 on hardware transmitter index 0

[00:53:42 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::ExecuteTccCmd: hwTxId=0


docs ucid=0
[00:53:42 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0
[00:53:42 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::InstallUsSets: Installing
UCD w/ucid for UCID=2 for CM hardware tx chan 0

[00:53:42 01/01/1970] [CmDocsisCtlThread]


BcmCmUsSetsState::TestAndLaunchUsTimeSync: starting upstream time sync
acquisition...
[00:53:42 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefOk: (Cm
Multi US Helper) target hwTxId=0
[00:53:42 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::UsTimeRefOk: upstream time
sync acquired for fHwTxId=0

== Beginning initial ranging for Docsis UCID 2 ==


Minimum transmit power is 17 dBmV
Maximum transmit power is 53 dBmV
Stored power level for UCID 2 is 38 dBmV
Using per transmitter stored initial upstream power = 38 dBmV hwTxId = 0 docsis
UCID = 2
RNG-RSP UsChanId=2 Adj: tim=1943 freq=-109 Stat=Continue (CmdPwr (UsChanId-
dBmV): (2-40.50) )
[00:53:43 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0xc9
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (2-
41.00) )
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (2-
41.00) )
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (2-
41.00) )
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (2-
41.00) )
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Success (CmdPwr (UsChanId-dBmV): (2-
41.00) )
[00:53:49 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::FirstRngSuccess:
(CmDocsisCtlThread)
first RNG-RSP w/status==SUCCESS for hwTxId=0 and DOCSIS ucid=2
[00:53:49 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::LaunchEaeBpkm:
(CmDocsisCtlThread) BPKM enabled. starting Early Authentication and Encryption BPKM
key requests. Primary Sid = 201
CM/DocsisCtl> Bandwidth request failure! Status = 0

BcmCmUsChanTimerMuxACT::HandleEvent() @time=3418610 fTimerType=5


(kT4NoStationMaint) hwTxId=0 docs ucid=2
[00:56:58 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::T4NoStationMaintEvent: ERROR - no Station Maint map op error.
hwTxId=0 docs ucid=2
[00:56:58 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::CommonRngErrorHandler: reason=10 (T4NoStationMaintTimeout)
hwTxId=0 docs ucid=2
[00:56:58 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) Purging DS
frequency 635000000 from current scan pass due to pre-registration restart error
[00:56:58 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) reinit MAC #16:
T4NoStationMaintTimeout

[00:56:58 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::Reset:


(CmDocsisCtlThread) DefaultSnmpAgentClass::RestartPendingEvent for Vendor CM
Agent w/ BRCM Factory Support
Logging event: Received Response to Broadcast Maintenance Request, But no Unicast
Maintenance opportunities received - T4 time out;CM-MAC=fc:4a:e9:de:ad:88;CMTS-
MAC=28:52:61:fa:d8:78;CM-QOS=1.1;CM-VER=3.1;
Vendor CM Agent w/ BRCM Factory Support updating ifTableLastChange.
Vendor CM Agent w/ BRCM Factory Support resetting to default state.
Vendor CM Agent w/ BRCM Factory Support destroying users...
Vendor CM Agent w/ BRCM Factory Support destroying notifies...
Vendor CM Agent w/ BRCM Factory Support destroying views...
Allowing DOCS-CABLE-DEVICE-MIB IP filters.
Vendor CM Agent w/ BRCM Factory Support deferring traps.
CM/DocsisCtl> Received RG Event 0x80000001 State 0x1
eRouter Linux WAN Down
[00:56:58 01/01/1970] [eRouterMsgPipe] eRouterMsgPipe::UpdateIpNetToMediaEntry:
(eRouterMsgPipe) eRouter IP address:0.0.0.0
00:56:58.900 01/01/1970 (CALC) mtaCmStatusInfo() - MTA is Signaled: *NOT-
OPERATIONAL* (Stat=0x1) emtaCurState = 0.
EmtaSnmpAgent::SoftReset
Pausing trap thread
emta factory agentResetting to default state.
emta factory agent destroying users...
emta factory agent destroying notifies...
emta factory agent destroying views...
emta factory agent entering RFC-2576 Coexistence security mode.
emta factory agent entering Basic/Hybrid flow provisioning mode.
Resuming trap thread
Stopping DHCP/ToD/TFTP (client requested)...
[00:56:58 01/01/1970] [CmDocsisIpThread] BcmEcosIpHalIf::RemoveIpv6Address: (IP
Stack1 HalIf) ERROR - Failed to remove IPv6 address fe80::fe4a:e9ff:fede:ad88/64
from the stack!
[00:56:58 01/01/1970] [CmDocsisIpThread] BcmDhcpV6ClientIf::ReleaseAddresses:
(DHCPv6 ClientIf for IP Stack1) ERROR - IA state is initial; there is no address to
release.
BcmDocsis3DsMacEnableMulticastDsidForwarding 0; primary DS = 0
SCQAM DSID filter control = 0x00
OFDM DSID filter control = 0x01
CM/DocsisCtl> Deleting DOCSIS 1.0 CoS Settings for SID 0xc9
[00:56:59 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows:
(DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along
with associated Classifiers and PHS rules...
[00:56:59 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState:
(CmDocsisCtlThread)
[00:56:59 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Primary SID for usHwChannel 0 to 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 1
Updating US chan 8 data Profile test msg for Sid: 0x0.
Updating US chan 9 data Profile test msg for Sid: 0x0.
CM/DocsisCtl> [00:56:59 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL declared PULSE lost!
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=false
[00:57:00 01/01/1970] [CmDocsisCtlThread] BcmCmMultiDsHelper::PreRegDsChanChange:
target freq hz = 0
reason string = ErrorRecovery
CmInitReason = 16

Starting DS scanning...
[00:57:00 01/01/1970] [CmDocsisCtlThread] BcmCmDownstreamScan::StartScan: Starting
DS scan
Checking for cable cut...

CM/DocsisCtl> Plant power is 15.55

Cable connected

Scanning 636.000 MHz SC-QAM (Annex A(Eu.1M))


CM/DocsisCtl> Scanning 637.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 638.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 639.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 640.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 641.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 642.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 643.000 MHz SC-QAM (Annex A(Eu.1M)) locked SC-QAM
[00:57:03 01/01/1970] [CmDocsisCtlThread] BcmCmDsChan::DsLockOk: (BcmCmDsChan 0)
hwRxId=0 freq=0 dcid=0

******************************************
DOWNSTREAM STATUS
******************************************
HW Channel ID = 0
Phy type: SC-QAM
DS active chan settings:
ds chan id = 0
center freq, Hz = 643000000 Hz
primary capable = false
status event rpt bitmask = 0

CM HW Detected DS Phy Settings:


Center Freq, Hz = 643000000
QAM = Locked
FEC = Locked
Carrier Freq Offset, kHz = 0
Channel Width, Hz = 8000000
Modulation = Qam256
Interleaver = Taps12Incr17
Symbol Rate, sym/sec = 6952000

******************************************

[00:57:03 01/01/1970] [CmDocsisCtlThread]


BcmCmMacDomainSetsState::StartDsMacMddInit:
**********************************************
Waiting for MDDs...
**********************************************

BcmCmDocsisCtlMsgACT::HandleEvent() @time=3423810 event_code=4 (kCmPriDsMddSetsOk)


MDD diplexer band edge not specified.
MDD Plant US Frequency Range = extended.
Requested Spectrum = US:(0 MHz..85 MHz) DS:(0 MHz..0 MHz)
Best Match = 0: US:(5 MHz..85 MHz) DS:(108 MHz..1218 MHz)
Switchable diplexer ECN support disabled. NOT switching diplexer.
[00:57:03 01/01/1970] [CmDocsisCtlThread]
BcmCmMdDsSgDiscState::TrimSgSetWithoutThisDcid:
1 candidate MD-DS-SG remain after TrimSgSetWithoutThisDcid( target_dcid )
for target_dcid=0x0f (15)
[00:57:03 01/01/1970] [CmDocsisCtlThread] BcmCmMdDsSgDiscState::StartMdDsSgDisc:
special case: one and only one MD-DS-SG contains mdd_dcid.
fMdDsSgId=0x1d (29)
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , M-d++a+i-+Ty-eA+dA++e|:
i_L-ca+A++e|A: 1
Chec+ +D_A++e|A
Cha++e+ Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1
MD-DS-SG discovery info:

fCmMdDsSgDiscState = 6 (kMdDsSgDiscDone)
fMdDsSgId = 0x1d (29)
fMdDsSgDiscovered = true

Trimmed Candidate Downstream Service Group Settings List: list size = 1

sgid size member dcid's


---- ---- -------------
29 34 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
27 28 29 30 31 32 159 160

Downstream Active Channel Settings List:

dcid type frequency prim capable rpt enable mod/annex or PLC params
---- -------- --------- ------------ ---------- -----------------------
1 SC-QAM 531000000 y 0x36 256QAM/AnnexA
2 SC-QAM 539000000 y 0x36 256QAM/AnnexA
3 SC-QAM 547000000 y 0x36 256QAM/AnnexA
4 SC-QAM 555000000 y 0x36 256QAM/AnnexA
5 SC-QAM 563000000 y 0x36 256QAM/AnnexA
6 SC-QAM 571000000 y 0x36 256QAM/AnnexA
7 SC-QAM 579000000 y 0x36 256QAM/AnnexA
8 SC-QAM 587000000 y 0x36 256QAM/AnnexA
9 SC-QAM 595000000 y 0x36 256QAM/AnnexA
10 SC-QAM 603000000 y 0x36 256QAM/AnnexA
11 SC-QAM 611000000 y 0x36 256QAM/AnnexA
12 SC-QAM 619000000 y 0x36 256QAM/AnnexA
13 SC-QAM 627000000 y 0x36 256QAM/AnnexA
14 SC-QAM 635000000 y 0x36 256QAM/AnnexA
15 SC-QAM 643000000 y 0x36 256QAM/AnnexA
16 SC-QAM 651000000 y 0x36 256QAM/AnnexA
17 SC-QAM 659000000 y 0x36 256QAM/AnnexA
18 SC-QAM 667000000 y 0x36 256QAM/AnnexA
19 SC-QAM 675000000 y 0x36 256QAM/AnnexA
20 SC-QAM 683000000 y 0x36 256QAM/AnnexA
21 SC-QAM 691000000 y 0x36 256QAM/AnnexA
22 SC-QAM 699000000 y 0x36 256QAM/AnnexA
23 SC-QAM 707000000 y 0x36 256QAM/AnnexA
24 SC-QAM 715000000 y 0x36 256QAM/AnnexA
25 SC-QAM 723000000 y 0x36 256QAM/AnnexA
26 SC-QAM 731000000 y 0x36 256QAM/AnnexA
27 SC-QAM 739000000 y 0x36 256QAM/AnnexA
28 SC-QAM 747000000 y 0x36 256QAM/AnnexA
29 SC-QAM 755000000 y 0x36 256QAM/AnnexA
30 SC-QAM 763000000 y 0x36 256QAM/AnnexA
31 SC-QAM 771000000 y 0x36 256QAM/AnnexA
32 SC-QAM 779000000 y 0x36 256QAM/AnnexA
159 OFDM PLC 897000000 n 0x36 25Khz/5us/0.625us
160 OFDM PLC 361000000 n 0x36 50Khz/0.9375us/0.625us

Trimmed Downstream Ambiguity Resolution Frequency List: list size = 3

531000000-sc_qam 539000000-sc_qam 547000000-sc_qam


visible dcid set = 15

freq with visible dcid set = 643000000

BcmCmDocsisCtlMsgACT::HandleEvent() @time=3424400 event_code=11


(kCmMdDsSgDiscDone)
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=true
[00:57:04 01/01/1970] [CmDocsisCtlThread]
BcmDocsisCmHalIf::SetPrimaryDownstreamChannel: (DOCSIS CableModem HalIf)
Installing primary downstream channel index: 0
SetRatios called with primary downstream channel number = 0
AnnexMode[0] = 1 QAM_Mode[0] = 256
Num/Den = 869/1280
3390 SCDMA/OFDM mode - ChannelNumber = 0 Numerator = 869 Denominator = 1280
CM/DocsisCtl> [00:57:04 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL failed to acquire sync or lost sync!
... TCOFDM - DTR is now locked.... (T2=150ms Sync=14)

Given a 216 MHz TCOFDM clock, the nominal value for the DTR FCW is 0xC22E45067
The DTR FCW is 0xc22e8a12 - that value is good (5, within 100 ppm)
Kicked off the DPLL
LE Done bit was set
LE Done bit was set
SCQAM DS clock source.
PLL in Leaky mode.
PLL Fn = 6, k1 = 18, k2 = 19
[00:57:04 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context=1 (ErrorRecovery)
[00:57:04 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context is error recovery or startup.
Always use last good upstream target chan id=1
[00:57:04 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper) Locked on the downstream. Waiting for UCDs...
[00:57:04 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefFail: (Cm
Multi US Helper) target hwTxId=0
CM/DocsisCtl> [00:57:06 01/01/1970] [CmDocsisCtlThread]
BcmCmMultiUsHelper::TmUcdRxTimerEvent: (Cm Multi US Helper)
ucd gathering ok.

[00:57:06 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper) state at
entry:

Channel targeting:
Downstream:
fTargetDsFreqHz = 0 (0)
fCurrentDsFreqHz = 0x265366c0 (643000000)
fStoredDsFreqHz = 0x29020c00 (688000000)

Upstream:
fDestSingleTxTargetUsChanId = 0x1 (1)
fTargetingContext = 1 (ErrorRecovery)
Startup UCD Selection Info:

low priority candidate ucid list = 3 1 2 4 8 5 7 6


happy home ucid set = 1 2 3 4

Upstream Active Channel Settings:

ucid rpt enable sel prio MAP source dcid's


---- ---------- -------- -----------------
1 0x1c0 0
2 0x1c0 0
3 0x1c0 0
4 0x1c0 0
5 0x1c0 0
6 0x1c0 0
7 0x1c0 0
8 0x1c0 0

BcmCmUsTargetMset (a.k.a. usable UCDs gathered during startup):

us config
phy change ranging scdma
type ucid dcid count tried? enabled?
---- ---- ---- ------ ------- --------
3 1 15 4 n n
3 2 15 4 n n
3 3 15 4 n n
3 4 15 4 n n
3 5 15 4 n n
3 6 15 4 n n
3 7 15 4 n n
3 8 15 4 n n

[00:57:06 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper)
starting docs3 upstream initialization on target ucid=3
with upstream phy type 3 on hardware transmitter index 0

[00:57:06 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::ExecuteTccCmd: hwTxId=0


docs ucid=0
[00:57:06 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0
[00:57:06 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::InstallUsSets: Installing
UCD w/ucid for UCID=3 for CM hardware tx chan 0

[00:57:06 01/01/1970] [CmDocsisCtlThread]


BcmCmUsSetsState::TestAndLaunchUsTimeSync: starting upstream time sync
acquisition...
[00:57:06 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefOk: (Cm
Multi US Helper) target hwTxId=0
[00:57:06 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::UsTimeRefOk: upstream time
sync acquired for fHwTxId=0

== Beginning initial ranging for Docsis UCID 3 ==


Minimum transmit power is 17 dBmV
Maximum transmit power is 53 dBmV
Stored power level for UCID 3 is 38 dBmV
Using per transmitter stored initial upstream power = 38 dBmV hwTxId = 0 docsis
UCID = 3
RNG-RSP UsChanId=3 Adj: tim=1855 freq=-53 Stat=Continue (CmdPwr (UsChanId-dBmV):
(3-41.25) )
[00:57:07 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0xc9
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (3-
41.25) )
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (3-
41.25) )
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (3-
41.25) )
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (3-
41.25) )
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Success (CmdPwr (UsChanId-dBmV): (3-
41.25) )
[00:57:12 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::FirstRngSuccess:
(CmDocsisCtlThread)
first RNG-RSP w/status==SUCCESS for hwTxId=0 and DOCSIS ucid=3
[00:57:12 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::LaunchEaeBpkm:
(CmDocsisCtlThread) BPKM enabled. starting Early Authentication and Encryption BPKM
key requests. Primary Sid = 201
CM/DocsisCtl> Bandwidth request failure! Status = 0

BcmCmUsChanTimerMuxACT::HandleEvent() @time=3621890 fTimerType=5


(kT4NoStationMaint) hwTxId=0 docs ucid=3
[01:00:21 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::T4NoStationMaintEvent: ERROR - no Station Maint map op error.
hwTxId=0 docs ucid=3
[01:00:21 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::CommonRngErrorHandler: reason=10 (T4NoStationMaintTimeout)
hwTxId=0 docs ucid=3
[01:00:21 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) Purging DS
frequency 643000000 from current scan pass due to pre-registration restart error
[01:00:21 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) reinit MAC #17:
T4NoStationMaintTimeout

[01:00:21 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::Reset:


(CmDocsisCtlThread) DefaultSnmpAgentClass::RestartPendingEvent for Vendor CM
Agent w/ BRCM Factory Support
Logging event: Received Response to Broadcast Maintenance Request, But no Unicast
Maintenance opportunities received - T4 time out;CM-MAC=fc:4a:e9:de:ad:88;CMTS-
MAC=28:52:61:fa:d8:78;CM-QOS=1.1;CM-VER=3.1;
Vendor CM Agent w/ BRCM Factory Support updating ifTableLastChange.
Vendor CM Agent w/ BRCM Factory Support resetting to default state.
Vendor CM Agent w/ BRCM Factory Support destroying users...
Vendor CM Agent w/ BRCM Factory Support destroying notifies...
Vendor CM Agent w/ BRCM Factory Support destroying views...
Allowing DOCS-CABLE-DEVICE-MIB IP filters.
Vendor CM Agent w/ BRCM Factory Support deferring traps.
Received RG Event 0x80000001 State 0x1
eRouter Linux WAN Down
[01:00:22 01/01/1970] [eRouterMsgPipe] eRouterMsgPipe::UpdateIpNetToMediaEntry:
(eRouterMsgPipe) eRouter IP address:0.0.0.0
01:00:22.180 01/01/1970 (CALC) mtaCmStatusInfo() - MTA is Signaled: *NOT-
OPERATIONAL* (Stat=0x1) emtaCurState = 0.
EmtaSnmpAgent::SoftReset
Pausing trap thread
emta factory agentResetting to default state.
emta factory agent destroying users...
emta factory agent destroying notifies...
emta factory agent destroying views...
emta factory agent entering RFC-2576 Coexistence security mode.
emta factory agent entering Basic/Hybrid flow provisioning mode.
Resuming trap thread
Stopping DHCP/ToD/TFTP (client requested)...
[01:00:22 01/01/1970] [CmDocsisIpThread] BcmEcosIpHalIf::RemoveIpv6Address: (IP
Stack1 HalIf) ERROR - Failed to remove IPv6 address fe80::fe4a:e9ff:fede:ad88/64
from the stack!
[01:00:22 01/01/1970] [CmDocsisIpThread] BcmDhcpV6ClientIf::ReleaseAddresses:
(DHCPv6 ClientIf for IP Stack1) ERROR - IA state is initial; there is no address to
release.
BcmDocsis3DsMacEnableMulticastDsidForwarding 0; primary DS = 0
SCQAM DSID filter control = 0x00
OFDM DSID filter control = 0x01
Deleting DOCSIS 1.0 CoS Settings for SID 0xc9
[01:00:22 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows:
(DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along
with associated Classifiers and PHS rules...
[01:00:22 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState:
(CmDocsisCtlThread)
[01:00:22 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Primary SID for usHwChannel 0 to 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 1
Updating US chan 8 data Profile test msg for Sid: 0x0.
Updating US chan 9 data Profile test msg for Sid: 0x0.
CM/DocsisCtl> [01:00:23 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL declared PULSE lost!
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=false
[01:00:23 01/01/1970] [CmDocsisCtlThread] BcmCmMultiDsHelper::PreRegDsChanChange:
target freq hz = 0
reason string = ErrorRecovery
CmInitReason = 16

Starting DS scanning...
[01:00:23 01/01/1970] [CmDocsisCtlThread] BcmCmDownstreamScan::StartScan: Starting
DS scan
Checking for cable cut...

CM/DocsisCtl> Plant power is 15.55

Cable connected

Scanning 644.000 MHz SC-QAM (Annex A(Eu.1M))


CM/DocsisCtl> Scanning 645.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 646.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 647.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 648.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 649.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 650.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 651.000 MHz SC-QAM (Annex A(Eu.1M)) locked SC-QAM
[01:00:26 01/01/1970] [CmDocsisCtlThread] BcmCmDsChan::DsLockOk: (BcmCmDsChan 0)
hwRxId=0 freq=0 dcid=0
******************************************
DOWNSTREAM STATUS
******************************************
HW Channel ID = 0
Phy type: SC-QAM
DS active chan settings:
ds chan id = 0
center freq, Hz = 651000000 Hz
primary capable = false
status event rpt bitmask = 0

CM HW Detected DS Phy Settings:


Center Freq, Hz = 651000000
QAM = Locked
FEC = Locked
Carrier Freq Offset, kHz = 0
Channel Width, Hz = 8000000
Modulation = Qam256
Interleaver = Taps12Incr17
Symbol Rate, sym/sec = 6952000

******************************************

[01:00:26 01/01/1970] [CmDocsisCtlThread]


BcmCmMacDomainSetsState::StartDsMacMddInit:
**********************************************
Waiting for MDDs...
**********************************************

CM/DocsisCtl>
BcmCmDocsisCtlMsgACT::HandleEvent() @time=3627750 event_code=4 (kCmPriDsMddSetsOk)

MDD diplexer band edge not specified.


MDD Plant US Frequency Range = extended.
Requested Spectrum = US:(0 MHz..85 MHz) DS:(0 MHz..0 MHz)
Best Match = 0: US:(5 MHz..85 MHz) DS:(108 MHz..1218 MHz)
Switchable diplexer ECN support disabled. NOT switching diplexer.
[01:00:27 01/01/1970] [CmDocsisCtlThread]
BcmCmMdDsSgDiscState::TrimSgSetWithoutThisDcid:
1 candidate MD-DS-SG remain after TrimSgSetWithoutThisDcid( target_dcid )
for target_dcid=0x10 (16)
[01:00:27 01/01/1970] [CmDocsisCtlThread] BcmCmMdDsSgDiscState::StartMdDsSgDisc:
special case: one and only one MD-DS-SG contains mdd_dcid.
fMdDsSgId=0x1d (29)
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , M-d++a+i-+Ty-eA+dA++e|:
i_L-ca+A++e|A: 1
Chec+ +D_A++e|A
Cha++e+ Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1

MD-DS-SG discovery info:

fCmMdDsSgDiscState = 6 (kMdDsSgDiscDone)
fMdDsSgId = 0x1d (29)
fMdDsSgDiscovered = true

Trimmed Candidate Downstream Service Group Settings List: list size = 1

sgid size member dcid's


---- ---- -------------
29 34 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
27 28 29 30 31 32 159 160

Downstream Active Channel Settings List:

dcid type frequency prim capable rpt enable mod/annex or PLC params
---- -------- --------- ------------ ---------- -----------------------
1 SC-QAM 531000000 y 0x36 256QAM/AnnexA
2 SC-QAM 539000000 y 0x36 256QAM/AnnexA
3 SC-QAM 547000000 y 0x36 256QAM/AnnexA
4 SC-QAM 555000000 y 0x36 256QAM/AnnexA
5 SC-QAM 563000000 y 0x36 256QAM/AnnexA
6 SC-QAM 571000000 y 0x36 256QAM/AnnexA
7 SC-QAM 579000000 y 0x36 256QAM/AnnexA
8 SC-QAM 587000000 y 0x36 256QAM/AnnexA
9 SC-QAM 595000000 y 0x36 256QAM/AnnexA
10 SC-QAM 603000000 y 0x36 256QAM/AnnexA
11 SC-QAM 611000000 y 0x36 256QAM/AnnexA
12 SC-QAM 619000000 y 0x36 256QAM/AnnexA
13 SC-QAM 627000000 y 0x36 256QAM/AnnexA
14 SC-QAM 635000000 y 0x36 256QAM/AnnexA
15 SC-QAM 643000000 y 0x36 256QAM/AnnexA
16 SC-QAM 651000000 y 0x36 256QAM/AnnexA
17 SC-QAM 659000000 y 0x36 256QAM/AnnexA
18 SC-QAM 667000000 y 0x36 256QAM/AnnexA
19 SC-QAM 675000000 y 0x36 256QAM/AnnexA
20 SC-QAM 683000000 y 0x36 256QAM/AnnexA
21 SC-QAM 691000000 y 0x36 256QAM/AnnexA
22 SC-QAM 699000000 y 0x36 256QAM/AnnexA
23 SC-QAM 707000000 y 0x36 256QAM/AnnexA
24 SC-QAM 715000000 y 0x36 256QAM/AnnexA
25 SC-QAM 723000000 y 0x36 256QAM/AnnexA
26 SC-QAM 731000000 y 0x36 256QAM/AnnexA
27 SC-QAM 739000000 y 0x36 256QAM/AnnexA
28 SC-QAM 747000000 y 0x36 256QAM/AnnexA
29 SC-QAM 755000000 y 0x36 256QAM/AnnexA
30 SC-QAM 763000000 y 0x36 256QAM/AnnexA
31 SC-QAM 771000000 y 0x36 256QAM/AnnexA
32 SC-QAM 779000000 y 0x36 256QAM/AnnexA
159 OFDM PLC 897000000 n 0x36 25Khz/5us/0.625us
160 OFDM PLC 361000000 n 0x36 50Khz/0.9375us/0.625us

Trimmed Downstream Ambiguity Resolution Frequency List: list size = 3

531000000-sc_qam 539000000-sc_qam 547000000-sc_qam

visible dcid set = 16

freq with visible dcid set = 651000000

BcmCmDocsisCtlMsgACT::HandleEvent() @time=3628350 event_code=11


(kCmMdDsSgDiscDone)
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=true
[01:00:28 01/01/1970] [CmDocsisCtlThread]
BcmDocsisCmHalIf::SetPrimaryDownstreamChannel: (DOCSIS CableModem HalIf)
Installing primary downstream channel index: 0
SetRatios called with primary downstream channel number = 0
AnnexMode[0] = 1 QAM_Mode[0] = 256
Num/Den = 869/1280
3390 SCDMA/OFDM mode - ChannelNumber = 0 Numerator = 869 Denominator = 1280
CM/DocsisCtl> [01:00:28 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL failed to acquire sync or lost sync!
... TCOFDM - DTR is now locked.... (T2=150ms Sync=14)

Given a 216 MHz TCOFDM clock, the nominal value for the DTR FCW is 0xC22E45067
The DTR FCW is 0xc22e8fd5 - that value is good (5, within 100 ppm)
Kicked off the DPLL
LE Done bit was set
LE Done bit was set
SCQAM DS clock source.
PLL in Leaky mode.
PLL Fn = 6, k1 = 18, k2 = 19
[01:00:28 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context=1 (ErrorRecovery)
[01:00:28 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context is error recovery or startup.
Always use last good upstream target chan id=1
[01:00:28 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper) Locked on the downstream. Waiting for UCDs...
[01:00:28 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefFail: (Cm
Multi US Helper) target hwTxId=0
CM/DocsisCtl> [01:00:30 01/01/1970] [CmDocsisCtlThread]
BcmCmMultiUsHelper::TmUcdRxTimerEvent: (Cm Multi US Helper)
ucd gathering ok.

[01:00:30 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper) state at
entry:

Channel targeting:
Downstream:
fTargetDsFreqHz = 0 (0)
fCurrentDsFreqHz = 0x26cd78c0 (651000000)
fStoredDsFreqHz = 0x29020c00 (688000000)

Upstream:
fDestSingleTxTargetUsChanId = 0x1 (1)
fTargetingContext = 1 (ErrorRecovery)

Startup UCD Selection Info:

low priority candidate ucid list = 2 4 3 1 7 8 6 5


happy home ucid set = 1 2 3 4

Upstream Active Channel Settings:

ucid rpt enable sel prio MAP source dcid's


---- ---------- -------- -----------------
1 0x1c0 0
2 0x1c0 0
3 0x1c0 0
4 0x1c0 0
5 0x1c0 0
6 0x1c0 0
7 0x1c0 0
8 0x1c0 0

BcmCmUsTargetMset (a.k.a. usable UCDs gathered during startup):

us config
phy change ranging scdma
type ucid dcid count tried? enabled?
---- ---- ---- ------ ------- --------
3 1 16 4 n n
3 2 16 4 n n
3 3 16 4 n n
3 4 16 4 n n
3 5 16 4 n n
3 6 16 4 n n
3 7 16 4 n n
3 8 16 4 n n

[01:00:30 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper)
starting docs3 upstream initialization on target ucid=2
with upstream phy type 3 on hardware transmitter index 0

[01:00:30 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::ExecuteTccCmd: hwTxId=0


docs ucid=0
[01:00:30 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0
[01:00:30 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::InstallUsSets: Installing
UCD w/ucid for UCID=2 for CM hardware tx chan 0

[01:00:30 01/01/1970] [CmDocsisCtlThread]


BcmCmUsSetsState::TestAndLaunchUsTimeSync: starting upstream time sync
acquisition...
[01:00:30 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefOk: (Cm
Multi US Helper) target hwTxId=0
[01:00:30 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::UsTimeRefOk: upstream time
sync acquired for fHwTxId=0

== Beginning initial ranging for Docsis UCID 2 ==


Minimum transmit power is 17 dBmV
Maximum transmit power is 53 dBmV
Stored power level for UCID 2 is 38 dBmV
Using per transmitter stored initial upstream power = 38 dBmV hwTxId = 0 docsis
UCID = 2
RNG-RSP UsChanId=2 Adj: tim=1931 freq=36 Stat=Continue (CmdPwr (UsChanId-dBmV):
(2-40.50) )
[01:00:31 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0xc9
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (2-
41.00) )
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (2-
41.00) )
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (2-
41.00) )
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (2-
41.00) )
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Success (CmdPwr (UsChanId-dBmV): (2-
41.00) )
[01:00:36 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::FirstRngSuccess:
(CmDocsisCtlThread)
first RNG-RSP w/status==SUCCESS for hwTxId=0 and DOCSIS ucid=2
[01:00:36 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::LaunchEaeBpkm:
(CmDocsisCtlThread) BPKM enabled. starting Early Authentication and Encryption BPKM
key requests. Primary Sid = 201
CM/DocsisCtl> Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
BcmCmUsChanTimerMuxACT::HandleEvent() @time=3826170 fTimerType=5
(kT4NoStationMaint) hwTxId=0 docs ucid=2
[01:03:46 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::T4NoStationMaintEvent: ERROR - no Station Maint map op error.
hwTxId=0 docs ucid=2
[01:03:46 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::CommonRngErrorHandler: reason=10 (T4NoStationMaintTimeout)
hwTxId=0 docs ucid=2
[01:03:46 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) Purging DS
frequency 651000000 from current scan pass due to pre-registration restart error
[01:03:46 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) reinit MAC #18:
T4NoStationMaintTimeout

[01:03:46 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::Reset:


(CmDocsisCtlThread) DefaultSnmpAgentClass::RestartPendingEvent for Vendor CM
Agent w/ BRCM Factory Support
Logging event: Received Response to Broadcast Maintenance Request, But no Unicast
Maintenance opportunities received - T4 time out;CM-MAC=fc:4a:e9:de:ad:88;CMTS-
MAC=28:52:61:fa:d8:78;CM-QOS=1.1;CM-VER=3.1;
Vendor CM Agent w/ BRCM Factory Support updating ifTableLastChange.
Vendor CM Agent w/ BRCM Factory Support resetting to default state.
Vendor CM Agent w/ BRCM Factory Support destroying users...
Vendor CM Agent w/ BRCM Factory Support destroying notifies...
Vendor CM Agent w/ BRCM Factory Support destroying views...
Allowing DOCS-CABLE-DEVICE-MIB IP filters.
Vendor CM Agent w/ BRCM Factory Support deferring traps.
Received RG Event 0x80000001 State 0x1
eRouter Linux WAN Down
[01:03:46 01/01/1970] [eRouterMsgPipe] eRouterMsgPipe::UpdateIpNetToMediaEntry:
(eRouterMsgPipe) eRouter IP address:0.0.0.0
01:03:46.460 01/01/1970 (CALC) mtaCmStatusInfo() - MTA is Signaled: *NOT-
OPERATIONAL* (Stat=0x1) emtaCurState = 0.
EmtaSnmpAgent::SoftReset
Pausing trap thread
emta factory agentResetting to default state.
emta factory agent destroying users...
emta factory agent destroying notifies...
emta factory agent destroying views...
emta factory agent entering RFC-2576 Coexistence security mode.
emta factory agent entering Basic/Hybrid flow provisioning mode.
Resuming trap thread
Stopping DHCP/ToD/TFTP (client requested)...
[01:03:46 01/01/1970] [CmDocsisIpThread] BcmEcosIpHalIf::RemoveIpv6Address: (IP
Stack1 HalIf) ERROR - Failed to remove IPv6 address fe80::fe4a:e9ff:fede:ad88/64
from the stack!
[01:03:46 01/01/1970] [CmDocsisIpThread] BcmDhcpV6ClientIf::ReleaseAddresses:
(DHCPv6 ClientIf for IP Stack1) ERROR - IA state is initial; there is no address to
release.
BcmDocsis3DsMacEnableMulticastDsidForwarding 0; primary DS = 0
SCQAM DSID filter control = 0x00
OFDM DSID filter control = 0x01
Deleting DOCSIS 1.0 CoS Settings for SID 0xc9
[01:03:46 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows:
(DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along
with associated Classifiers and PHS rules...
[01:03:46 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState:
(CmDocsisCtlThread)
[01:03:46 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Primary SID for usHwChannel 0 to 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 1
Updating US chan 8 data Profile test msg for Sid: 0x0.
Updating US chan 9 data Profile test msg for Sid: 0x0.
CM/DocsisCtl> [01:03:47 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL declared PULSE lost!
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=false
[01:03:47 01/01/1970] [CmDocsisCtlThread] BcmCmMultiDsHelper::PreRegDsChanChange:
target freq hz = 0
reason string = ErrorRecovery
CmInitReason = 16

Starting DS scanning...
[01:03:47 01/01/1970] [CmDocsisCtlThread] BcmCmDownstreamScan::StartScan: Starting
DS scan
Checking for cable cut...

CM/DocsisCtl> Plant power is 15.55

Cable connected

Scanning 652.000 MHz SC-QAM (Annex A(Eu.1M))


CM/DocsisCtl> Scanning 653.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 654.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 655.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 656.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 657.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 658.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 659.000 MHz SC-QAM (Annex A(Eu.1M)) locked SC-QAM
[01:03:51 01/01/1970] [CmDocsisCtlThread] BcmCmDsChan::DsLockOk: (BcmCmDsChan 0)
hwRxId=0 freq=0 dcid=0

******************************************
DOWNSTREAM STATUS
******************************************
HW Channel ID = 0
Phy type: SC-QAM
DS active chan settings:
ds chan id = 0
center freq, Hz = 659000000 Hz
primary capable = false
status event rpt bitmask = 0

CM HW Detected DS Phy Settings:


Center Freq, Hz = 659000000
QAM = Locked
FEC = Locked
Carrier Freq Offset, kHz = 0
Channel Width, Hz = 8000000
Modulation = Qam256
Interleaver = Taps12Incr17
Symbol Rate, sym/sec = 6952000

******************************************
[01:03:51 01/01/1970] [CmDocsisCtlThread]
BcmCmMacDomainSetsState::StartDsMacMddInit:
**********************************************
Waiting for MDDs...
**********************************************

CM/DocsisCtl>
BcmCmDocsisCtlMsgACT::HandleEvent() @time=3831750 event_code=4 (kCmPriDsMddSetsOk)

MDD diplexer band edge not specified.


MDD Plant US Frequency Range = extended.
Requested Spectrum = US:(0 MHz..85 MHz) DS:(0 MHz..0 MHz)
Best Match = 0: US:(5 MHz..85 MHz) DS:(108 MHz..1218 MHz)
Switchable diplexer ECN support disabled. NOT switching diplexer.
[01:03:51 01/01/1970] [CmDocsisCtlThread]
BcmCmMdDsSgDiscState::TrimSgSetWithoutThisDcid:
1 candidate MD-DS-SG remain after TrimSgSetWithoutThisDcid( target_dcid )
for target_dcid=0x11 (17)
[01:03:51 01/01/1970] [CmDocsisCtlThread] BcmCmMdDsSgDiscState::StartMdDsSgDisc:
special case: one and only one MD-DS-SG contains mdd_dcid.
fMdDsSgId=0x1d (29)
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , M-d++a+i-+Ty-eA+dA++e|:
i_L-ca+A++e|A: 1
Chec+ +D_A++e|A
Cha++e+ Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1

MD-DS-SG discovery info:

fCmMdDsSgDiscState = 6 (kMdDsSgDiscDone)
fMdDsSgId = 0x1d (29)
fMdDsSgDiscovered = true

Trimmed Candidate Downstream Service Group Settings List: list size = 1

sgid size member dcid's


---- ---- -------------
29 34 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
27 28 29 30 31 32 159 160

Downstream Active Channel Settings List:

dcid type frequency prim capable rpt enable mod/annex or PLC params
---- -------- --------- ------------ ---------- -----------------------
1 SC-QAM 531000000 y 0x36 256QAM/AnnexA
2 SC-QAM 539000000 y 0x36 256QAM/AnnexA
3 SC-QAM 547000000 y 0x36 256QAM/AnnexA
4 SC-QAM 555000000 y 0x36 256QAM/AnnexA
5 SC-QAM 563000000 y 0x36 256QAM/AnnexA
6 SC-QAM 571000000 y 0x36 256QAM/AnnexA
7 SC-QAM 579000000 y 0x36 256QAM/AnnexA
8 SC-QAM 587000000 y 0x36 256QAM/AnnexA
9 SC-QAM 595000000 y 0x36 256QAM/AnnexA
10 SC-QAM 603000000 y 0x36 256QAM/AnnexA
11 SC-QAM 611000000 y 0x36 256QAM/AnnexA
12 SC-QAM 619000000 y 0x36 256QAM/AnnexA
13 SC-QAM 627000000 y 0x36 256QAM/AnnexA
14 SC-QAM 635000000 y 0x36 256QAM/AnnexA
15 SC-QAM 643000000 y 0x36 256QAM/AnnexA
16 SC-QAM 651000000 y 0x36 256QAM/AnnexA
17 SC-QAM 659000000 y 0x36 256QAM/AnnexA
18 SC-QAM 667000000 y 0x36 256QAM/AnnexA
19 SC-QAM 675000000 y 0x36 256QAM/AnnexA
20 SC-QAM 683000000 y 0x36 256QAM/AnnexA
21 SC-QAM 691000000 y 0x36 256QAM/AnnexA
22 SC-QAM 699000000 y 0x36 256QAM/AnnexA
23 SC-QAM 707000000 y 0x36 256QAM/AnnexA
24 SC-QAM 715000000 y 0x36 256QAM/AnnexA
25 SC-QAM 723000000 y 0x36 256QAM/AnnexA
26 SC-QAM 731000000 y 0x36 256QAM/AnnexA
27 SC-QAM 739000000 y 0x36 256QAM/AnnexA
28 SC-QAM 747000000 y 0x36 256QAM/AnnexA
29 SC-QAM 755000000 y 0x36 256QAM/AnnexA
30 SC-QAM 763000000 y 0x36 256QAM/AnnexA
31 SC-QAM 771000000 y 0x36 256QAM/AnnexA
32 SC-QAM 779000000 y 0x36 256QAM/AnnexA
159 OFDM PLC 897000000 n 0x36 25Khz/5us/0.625us
160 OFDM PLC 361000000 n 0x36 50Khz/0.9375us/0.625us

Trimmed Downstream Ambiguity Resolution Frequency List: list size = 3

531000000-sc_qam 539000000-sc_qam 547000000-sc_qam

visible dcid set = 17

freq with visible dcid set = 659000000

BcmCmDocsisCtlMsgACT::HandleEvent() @time=3832350 event_code=11


(kCmMdDsSgDiscDone)
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=true
[01:03:52 01/01/1970] [CmDocsisCtlThread]
BcmDocsisCmHalIf::SetPrimaryDownstreamChannel: (DOCSIS CableModem HalIf)
Installing primary downstream channel index: 0
SetRatios called with primary downstream channel number = 0
AnnexMode[0] = 1 QAM_Mode[0] = 256
Num/Den = 869/1280
3390 SCDMA/OFDM mode - ChannelNumber = 0 Numerator = 869 Denominator = 1280
CM/DocsisCtl> [01:03:52 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL failed to acquire sync or lost sync!
... TCOFDM - DTR is now locked.... (T2=150ms Sync=14)

Given a 216 MHz TCOFDM clock, the nominal value for the DTR FCW is 0xC22E45067
The DTR FCW is 0xc22e8f10 - that value is good (5, within 100 ppm)
Kicked off the DPLL
LE Done bit was set
LE Done bit was set
SCQAM DS clock source.
PLL in Leaky mode.
PLL Fn = 6, k1 = 18, k2 = 19
[01:03:52 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context=1 (ErrorRecovery)
[01:03:52 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context is error recovery or startup.
Always use last good upstream target chan id=1
[01:03:52 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper) Locked on the downstream. Waiting for UCDs...
[01:03:52 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefFail: (Cm
Multi US Helper) target hwTxId=0
CM/DocsisCtl> [01:03:54 01/01/1970] [CmDocsisCtlThread]
BcmCmMultiUsHelper::TmUcdRxTimerEvent: (Cm Multi US Helper)
ucd gathering ok.

[01:03:54 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper) state at
entry:

Channel targeting:
Downstream:
fTargetDsFreqHz = 0 (0)
fCurrentDsFreqHz = 0x27478ac0 (659000000)
fStoredDsFreqHz = 0x29020c00 (688000000)

Upstream:
fDestSingleTxTargetUsChanId = 0x1 (1)
fTargetingContext = 1 (ErrorRecovery)

Startup UCD Selection Info:

low priority candidate ucid list = 4 2 1 3 6 7 5 8


happy home ucid set = 1 2 3 4

Upstream Active Channel Settings:

ucid rpt enable sel prio MAP source dcid's


---- ---------- -------- -----------------
1 0x1c0 0
2 0x1c0 0
3 0x1c0 0
4 0x1c0 0
5 0x1c0 0
6 0x1c0 0
7 0x1c0 0
8 0x1c0 0

BcmCmUsTargetMset (a.k.a. usable UCDs gathered during startup):

us config
phy change ranging scdma
type ucid dcid count tried? enabled?
---- ---- ---- ------ ------- --------
3 1 17 4 n n
3 2 17 4 n n
3 3 17 4 n n
3 4 17 4 n n
3 5 17 4 n n
3 6 17 4 n n
3 7 17 4 n n
3 8 17 4 n n

[01:03:54 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper)
starting docs3 upstream initialization on target ucid=4
with upstream phy type 3 on hardware transmitter index 0

[01:03:54 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::ExecuteTccCmd: hwTxId=0


docs ucid=0
[01:03:54 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0
[01:03:54 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::InstallUsSets: Installing
UCD w/ucid for UCID=4 for CM hardware tx chan 0

[01:03:54 01/01/1970] [CmDocsisCtlThread]


BcmCmUsSetsState::TestAndLaunchUsTimeSync: starting upstream time sync
acquisition...
[01:03:54 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefOk: (Cm
Multi US Helper) target hwTxId=0
[01:03:54 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::UsTimeRefOk: upstream time
sync acquired for fHwTxId=0

== Beginning initial ranging for Docsis UCID 4 ==


Minimum transmit power is 17 dBmV
Maximum transmit power is 53 dBmV
Stored power level for UCID 4 is 42 dBmV
Using per transmitter stored initial upstream power = 42 dBmV hwTxId = 0 docsis
UCID = 4
RNG-RSP UsChanId=4 Adj: tim=1854 freq=-9 Stat=Continue (CmdPwr (UsChanId-dBmV):
(4-41.75) )
[01:03:55 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0xc9
RNG-RSP UsChanId=4 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (4-
41.75) )
RNG-RSP UsChanId=4 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (4-
41.75) )
RNG-RSP UsChanId=4 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (4-
41.75) )
RNG-RSP UsChanId=4 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (4-
41.75) )
RNG-RSP UsChanId=4 Adj: tim=0 freq=0 Stat=Success (CmdPwr (UsChanId-dBmV): (4-
41.75) )
[01:04:00 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::FirstRngSuccess:
(CmDocsisCtlThread)
first RNG-RSP w/status==SUCCESS for hwTxId=0 and DOCSIS ucid=4
[01:04:00 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::LaunchEaeBpkm:
(CmDocsisCtlThread) BPKM enabled. starting Early Authentication and Encryption BPKM
key requests. Primary Sid = 201
CM/DocsisCtl> Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0

BcmCmUsChanTimerMuxACT::HandleEvent() @time=4029950 fTimerType=5


(kT4NoStationMaint) hwTxId=0 docs ucid=4
[01:07:09 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::T4NoStationMaintEvent: ERROR - no Station Maint map op error.
hwTxId=0 docs ucid=4
[01:07:09 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::CommonRngErrorHandler: reason=10 (T4NoStationMaintTimeout)
hwTxId=0 docs ucid=4
[01:07:09 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) Purging DS
frequency 659000000 from current scan pass due to pre-registration restart error
[01:07:10 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) reinit MAC #19:
T4NoStationMaintTimeout

[01:07:10 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::Reset:


(CmDocsisCtlThread) DefaultSnmpAgentClass::RestartPendingEvent for Vendor CM
Agent w/ BRCM Factory Support
Logging event: Received Response to Broadcast Maintenance Request, But no Unicast
Maintenance opportunities received - T4 time out;CM-MAC=fc:4a:e9:de:ad:88;CMTS-
MAC=28:52:61:fa:d8:78;CM-QOS=1.1;CM-VER=3.1;
Vendor CM Agent w/ BRCM Factory Support updating ifTableLastChange.
Vendor CM Agent w/ BRCM Factory Support resetting to default state.
Vendor CM Agent w/ BRCM Factory Support destroying users...
Vendor CM Agent w/ BRCM Factory Support destroying notifies...
Vendor CM Agent w/ BRCM Factory Support destroying views...
Allowing DOCS-CABLE-DEVICE-MIB IP filters.
Vendor CM Agent w/ BRCM Factory Support deferring traps.
Received RG Event 0x80000001 State 0x1
eRouter Linux WAN Down
[01:07:10 01/01/1970] [eRouterMsgPipe] eRouterMsgPipe::UpdateIpNetToMediaEntry:
(eRouterMsgPipe) eRouter IP address:0.0.0.0
01:07:10.240 01/01/1970 (CALC) mtaCmStatusInfo() - MTA is Signaled: *NOT-
OPERATIONAL* (Stat=0x1) emtaCurState = 0.
EmtaSnmpAgent::SoftReset
Pausing trap thread
emta factory agentResetting to default state.
emta factory agent destroying users...
emta factory agent destroying notifies...
emta factory agent destroying views...
emta factory agent entering RFC-2576 Coexistence security mode.
emta factory agent entering Basic/Hybrid flow provisioning mode.
Resuming trap thread
Stopping DHCP/ToD/TFTP (client requested)...
[01:07:10 01/01/1970] [CmDocsisIpThread] BcmEcosIpHalIf::RemoveIpv6Address: (IP
Stack1 HalIf) ERROR - Failed to remove IPv6 address fe80::fe4a:e9ff:fede:ad88/64
from the stack!
[01:07:10 01/01/1970] [CmDocsisIpThread] BcmDhcpV6ClientIf::ReleaseAddresses:
(DHCPv6 ClientIf for IP Stack1) ERROR - IA state is initial; there is no address to
release.
BcmDocsis3DsMacEnableMulticastDsidForwarding 0; primary DS = 0
SCQAM DSID filter control = 0x00
OFDM DSID filter control = 0x01
Deleting DOCSIS 1.0 CoS Settings for SID 0xc9
[01:07:10 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows:
(DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along
with associated Classifiers and PHS rules...
[01:07:10 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState:
(CmDocsisCtlThread)
[01:07:10 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Primary SID for usHwChannel 0 to 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 1
Updating US chan 8 data Profile test msg for Sid: 0x0.
Updating US chan 9 data Profile test msg for Sid: 0x0.
CM/DocsisCtl> [01:07:11 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL declared PULSE lost!
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=false
[01:07:11 01/01/1970] [CmDocsisCtlThread] BcmCmMultiDsHelper::PreRegDsChanChange:
target freq hz = 0
reason string = ErrorRecovery
CmInitReason = 16

Starting DS scanning...
[01:07:11 01/01/1970] [CmDocsisCtlThread] BcmCmDownstreamScan::StartScan: Starting
DS scan
Checking for cable cut...

CM/DocsisCtl> Plant power is 15.65

Cable connected

CM/DocsisCtl> Scanning 660.000 MHz SC-QAM (Annex A(Eu.1M))


Scanning 661.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 662.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 663.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 664.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 665.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 666.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 667.000 MHz SC-QAM (Annex A(Eu.1M)) locked SC-QAM
[01:07:14 01/01/1970] [CmDocsisCtlThread] BcmCmDsChan::DsLockOk: (BcmCmDsChan 0)
hwRxId=0 freq=0 dcid=0

******************************************
DOWNSTREAM STATUS
******************************************
HW Channel ID = 0
Phy type: SC-QAM
DS active chan settings:
ds chan id = 0
center freq, Hz = 667000000 Hz
primary capable = false
status event rpt bitmask = 0

CM HW Detected DS Phy Settings:


Center Freq, Hz = 667000000
QAM = Locked
FEC = Locked
Carrier Freq Offset, kHz = 0
Channel Width, Hz = 8000000
Modulation = Qam256
Interleaver = Taps12Incr17
Symbol Rate, sym/sec = 6952000

******************************************

[01:07:14 01/01/1970] [CmDocsisCtlThread]


BcmCmMacDomainSetsState::StartDsMacMddInit:
**********************************************
Waiting for MDDs...
**********************************************

CM/DocsisCtl>
BcmCmDocsisCtlMsgACT::HandleEvent() @time=4035750 event_code=4 (kCmPriDsMddSetsOk)

MDD diplexer band edge not specified.


MDD Plant US Frequency Range = extended.
Requested Spectrum = US:(0 MHz..85 MHz) DS:(0 MHz..0 MHz)
Best Match = 0: US:(5 MHz..85 MHz) DS:(108 MHz..1218 MHz)
Switchable diplexer ECN support disabled. NOT switching diplexer.
[01:07:15 01/01/1970] [CmDocsisCtlThread]
BcmCmMdDsSgDiscState::TrimSgSetWithoutThisDcid:
1 candidate MD-DS-SG remain after TrimSgSetWithoutThisDcid( target_dcid )
for target_dcid=0x12 (18)
[01:07:15 01/01/1970] [CmDocsisCtlThread] BcmCmMdDsSgDiscState::StartMdDsSgDisc:
special case: one and only one MD-DS-SG contains mdd_dcid.
fMdDsSgId=0x1d (29)
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , M-d++a+i-+Ty-eA+dA++e|:
i_L-ca+A++e|A: 1
Chec+ +D_A++e|A
Cha++e+ Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1

MD-DS-SG discovery info:

fCmMdDsSgDiscState = 6 (kMdDsSgDiscDone)
fMdDsSgId = 0x1d (29)
fMdDsSgDiscovered = true

Trimmed Candidate Downstream Service Group Settings List: list size = 1

sgid size member dcid's


---- ---- -------------
29 34 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
27 28 29 30 31 32 159 160

Downstream Active Channel Settings List:


dcid type frequency prim capable rpt enable mod/annex or PLC params
---- -------- --------- ------------ ---------- -----------------------
1 SC-QAM 531000000 y 0x36 256QAM/AnnexA
2 SC-QAM 539000000 y 0x36 256QAM/AnnexA
3 SC-QAM 547000000 y 0x36 256QAM/AnnexA
4 SC-QAM 555000000 y 0x36 256QAM/AnnexA
5 SC-QAM 563000000 y 0x36 256QAM/AnnexA
6 SC-QAM 571000000 y 0x36 256QAM/AnnexA
7 SC-QAM 579000000 y 0x36 256QAM/AnnexA
8 SC-QAM 587000000 y 0x36 256QAM/AnnexA
9 SC-QAM 595000000 y 0x36 256QAM/AnnexA
10 SC-QAM 603000000 y 0x36 256QAM/AnnexA
11 SC-QAM 611000000 y 0x36 256QAM/AnnexA
12 SC-QAM 619000000 y 0x36 256QAM/AnnexA
13 SC-QAM 627000000 y 0x36 256QAM/AnnexA
14 SC-QAM 635000000 y 0x36 256QAM/AnnexA
15 SC-QAM 643000000 y 0x36 256QAM/AnnexA
16 SC-QAM 651000000 y 0x36 256QAM/AnnexA
17 SC-QAM 659000000 y 0x36 256QAM/AnnexA
18 SC-QAM 667000000 y 0x36 256QAM/AnnexA
19 SC-QAM 675000000 y 0x36 256QAM/AnnexA
20 SC-QAM 683000000 y 0x36 256QAM/AnnexA
21 SC-QAM 691000000 y 0x36 256QAM/AnnexA
22 SC-QAM 699000000 y 0x36 256QAM/AnnexA
23 SC-QAM 707000000 y 0x36 256QAM/AnnexA
24 SC-QAM 715000000 y 0x36 256QAM/AnnexA
25 SC-QAM 723000000 y 0x36 256QAM/AnnexA
26 SC-QAM 731000000 y 0x36 256QAM/AnnexA
27 SC-QAM 739000000 y 0x36 256QAM/AnnexA
28 SC-QAM 747000000 y 0x36 256QAM/AnnexA
29 SC-QAM 755000000 y 0x36 256QAM/AnnexA
30 SC-QAM 763000000 y 0x36 256QAM/AnnexA
31 SC-QAM 771000000 y 0x36 256QAM/AnnexA
32 SC-QAM 779000000 y 0x36 256QAM/AnnexA
159 OFDM PLC 897000000 n 0x36 25Khz/5us/0.625us
160 OFDM PLC 361000000 n 0x36 50Khz/0.9375us/0.625us

Trimmed Downstream Ambiguity Resolution Frequency List: list size = 3

531000000-sc_qam 539000000-sc_qam 547000000-sc_qam

visible dcid set = 18

freq with visible dcid set = 667000000

BcmCmDocsisCtlMsgACT::HandleEvent() @time=4036350 event_code=11


(kCmMdDsSgDiscDone)
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=true
[01:07:16 01/01/1970] [CmDocsisCtlThread]
BcmDocsisCmHalIf::SetPrimaryDownstreamChannel: (DOCSIS CableModem HalIf)
Installing primary downstream channel index: 0
SetRatios called with primary downstream channel number = 0
AnnexMode[0] = 1 QAM_Mode[0] = 256
Num/Den = 869/1280
3390 SCDMA/OFDM mode - ChannelNumber = 0 Numerator = 869 Denominator = 1280
CM/DocsisCtl> [01:07:16 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL failed to acquire sync or lost sync!
... TCOFDM - DTR is now locked.... (T2=150ms Sync=14)

Given a 216 MHz TCOFDM clock, the nominal value for the DTR FCW is 0xC22E45067
The DTR FCW is 0xc22e927f - that value is good (6, within 100 ppm)
Kicked off the DPLL
LE Done bit was set
LE Done bit was set
SCQAM DS clock source.
PLL in Leaky mode.
PLL Fn = 6, k1 = 18, k2 = 19
[01:07:16 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context=1 (ErrorRecovery)
[01:07:16 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context is error recovery or startup.
Always use last good upstream target chan id=1
[01:07:16 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper) Locked on the downstream. Waiting for UCDs...
[01:07:16 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefFail: (Cm
Multi US Helper) target hwTxId=0
CM/DocsisCtl> [01:07:18 01/01/1970] [CmDocsisCtlThread]
BcmCmMultiUsHelper::TmUcdRxTimerEvent: (Cm Multi US Helper)
ucd gathering ok.

[01:07:18 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper) state at
entry:

Channel targeting:
Downstream:
fTargetDsFreqHz = 0 (0)
fCurrentDsFreqHz = 0x27c19cc0 (667000000)
fStoredDsFreqHz = 0x29020c00 (688000000)

Upstream:
fDestSingleTxTargetUsChanId = 0x1 (1)
fTargetingContext = 1 (ErrorRecovery)

Startup UCD Selection Info:

low priority candidate ucid list = 3 2 1 4 6 8 5 7


happy home ucid set = 1 2 3 4

Upstream Active Channel Settings:

ucid rpt enable sel prio MAP source dcid's


---- ---------- -------- -----------------
1 0x1c0 0
2 0x1c0 0
3 0x1c0 0
4 0x1c0 0
5 0x1c0 0
6 0x1c0 0
7 0x1c0 0
8 0x1c0 0
BcmCmUsTargetMset (a.k.a. usable UCDs gathered during startup):

us config
phy change ranging scdma
type ucid dcid count tried? enabled?
---- ---- ---- ------ ------- --------
3 1 18 4 n n
3 2 18 4 n n
3 3 18 4 n n
3 4 18 4 n n
3 5 18 4 n n
3 6 18 4 n n
3 7 18 4 n n
3 8 18 4 n n

[01:07:18 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper)
starting docs3 upstream initialization on target ucid=3
with upstream phy type 3 on hardware transmitter index 0

[01:07:18 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::ExecuteTccCmd: hwTxId=0


docs ucid=0
[01:07:18 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0
[01:07:18 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::InstallUsSets: Installing
UCD w/ucid for UCID=3 for CM hardware tx chan 0

[01:07:18 01/01/1970] [CmDocsisCtlThread]


BcmCmUsSetsState::TestAndLaunchUsTimeSync: starting upstream time sync
acquisition...
[01:07:18 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefOk: (Cm
Multi US Helper) target hwTxId=0
[01:07:18 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::UsTimeRefOk: upstream time
sync acquired for fHwTxId=0

== Beginning initial ranging for Docsis UCID 3 ==


Minimum transmit power is 17 dBmV
Maximum transmit power is 53 dBmV
Stored power level for UCID 3 is 38 dBmV
Using per transmitter stored initial upstream power = 38 dBmV hwTxId = 0 docsis
UCID = 3
RNG-RSP UsChanId=3 Adj: tim=1884 freq=24 Stat=Continue (CmdPwr (UsChanId-dBmV):
(3-41.25) )
[01:07:19 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0xc9
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (3-
41.25) )
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (3-
41.25) )
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (3-
41.25) )
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (3-
41.25) )
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Success (CmdPwr (UsChanId-dBmV): (3-
41.25) )
[01:07:24 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::FirstRngSuccess:
(CmDocsisCtlThread)
first RNG-RSP w/status==SUCCESS for hwTxId=0 and DOCSIS ucid=3
[01:07:24 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::LaunchEaeBpkm:
(CmDocsisCtlThread) BPKM enabled. starting Early Authentication and Encryption BPKM
key requests. Primary Sid = 201
CM/DocsisCtl> Bandwidth request failure! Status = 0

BcmCmUsChanTimerMuxACT::HandleEvent() @time=4234490 fTimerType=5


(kT4NoStationMaint) hwTxId=0 docs ucid=3
[01:10:34 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::T4NoStationMaintEvent: ERROR - no Station Maint map op error.
hwTxId=0 docs ucid=3
[01:10:34 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::CommonRngErrorHandler: reason=10 (T4NoStationMaintTimeout)
hwTxId=0 docs ucid=3
[01:10:34 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) Purging DS
frequency 667000000 from current scan pass due to pre-registration restart error
[01:10:34 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) reinit MAC #20:
T4NoStationMaintTimeout

[01:10:34 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::Reset:


(CmDocsisCtlThread) DefaultSnmpAgentClass::RestartPendingEvent for Vendor CM
Agent w/ BRCM Factory Support
Logging event: Received Response to Broadcast Maintenance Request, But no Unicast
Maintenance opportunities received - T4 time out;CM-MAC=fc:4a:e9:de:ad:88;CMTS-
MAC=28:52:61:fa:d8:78;CM-QOS=1.1;CM-VER=3.1;
Vendor CM Agent w/ BRCM Factory Support updating ifTableLastChange.
Vendor CM Agent w/ BRCM Factory Support resetting to default state.
Vendor CM Agent w/ BRCM Factory Support destroying users...
Vendor CM Agent w/ BRCM Factory Support destroying notifies...
Vendor CM Agent w/ BRCM Factory Support destroying views...
Allowing DOCS-CABLE-DEVICE-MIB IP filters.
Vendor CM Agent w/ BRCM Factory Support deferring traps.
Received RG Event 0x80000001 State 0x1
eRouter Linux WAN Down
[01:10:34 01/01/1970] [eRouterMsgPipe] eRouterMsgPipe::UpdateIpNetToMediaEntry:
(eRouterMsgPipe) eRouter IP address:0.0.0.0
01:10:34.780 01/01/1970 (CALC) mtaCmStatusInfo() - MTA is Signaled: *NOT-
OPERATIONAL* (Stat=0x1) emtaCurState = 0.
EmtaSnmpAgent::SoftReset
Pausing trap thread
emta factory agentResetting to default state.
emta factory agent destroying users...
emta factory agent destroying notifies...
emta factory agent destroying views...
emta factory agent entering RFC-2576 Coexistence security mode.
emta factory agent entering Basic/Hybrid flow provisioning mode.
Resuming trap thread
Stopping DHCP/ToD/TFTP (client requested)...
[01:10:34 01/01/1970] [CmDocsisIpThread] BcmEcosIpHalIf::RemoveIpv6Address: (IP
Stack1 HalIf) ERROR - Failed to remove IPv6 address fe80::fe4a:e9ff:fede:ad88/64
from the stack!
[01:10:34 01/01/1970] [CmDocsisIpThread] BcmDhcpV6ClientIf::ReleaseAddresses:
(DHCPv6 ClientIf for IP Stack1) ERROR - IA state is initial; there is no address to
release.
BcmDocsis3DsMacEnableMulticastDsidForwarding 0; primary DS = 0
SCQAM DSID filter control = 0x00
OFDM DSID filter control = 0x01
Deleting DOCSIS 1.0 CoS Settings for SID 0xc9
[01:10:35 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows:
(DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along
with associated Classifiers and PHS rules...
[01:10:35 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState:
(CmDocsisCtlThread)
[01:10:35 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Primary SID for usHwChannel 0 to 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 1
Updating US chan 8 data Profile test msg for Sid: 0x0.
Updating US chan 9 data Profile test msg for Sid: 0x0.
CM/DocsisCtl> [01:10:35 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL declared PULSE lost!
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=false
[01:10:36 01/01/1970] [CmDocsisCtlThread] BcmCmMultiDsHelper::PreRegDsChanChange:
target freq hz = 0
reason string = ErrorRecovery
CmInitReason = 16

Starting DS scanning...
[01:10:36 01/01/1970] [CmDocsisCtlThread] BcmCmDownstreamScan::StartScan: Starting
DS scan
Checking for cable cut...

CM/DocsisCtl> Plant power is 15.55

Cable connected

CM/DocsisCtl> Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)


Scanning 668.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 669.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 670.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 671.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 672.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 673.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 674.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 675.000 MHz SC-QAM (Annex A(Eu.1M)) locked SC-QAM
[01:10:39 01/01/1970] [CmDocsisCtlThread] BcmCmDsChan::DsLockOk: (BcmCmDsChan 0)
hwRxId=0 freq=0 dcid=0

******************************************
DOWNSTREAM STATUS
******************************************
HW Channel ID = 0
Phy type: SC-QAM
DS active chan settings:
ds chan id = 0
center freq, Hz = 675000000 Hz
primary capable = false
status event rpt bitmask = 0

CM HW Detected DS Phy Settings:


Center Freq, Hz = 675000000
QAM = Locked
FEC = Locked
Carrier Freq Offset, kHz = 0
Channel Width, Hz = 8000000
Modulation = Qam256
Interleaver = Taps12Incr17
Symbol Rate, sym/sec = 6952000

******************************************

[01:10:39 01/01/1970] [CmDocsisCtlThread]


BcmCmMacDomainSetsState::StartDsMacMddInit:
**********************************************
Waiting for MDDs...
**********************************************

BcmCmDocsisCtlMsgACT::HandleEvent() @time=4239750 event_code=4 (kCmPriDsMddSetsOk)

MDD diplexer band edge not specified.


MDD Plant US Frequency Range = extended.
Requested Spectrum = US:(0 MHz..85 MHz) DS:(0 MHz..0 MHz)
Best Match = 0: US:(5 MHz..85 MHz) DS:(108 MHz..1218 MHz)
Switchable diplexer ECN support disabled. NOT switching diplexer.
[01:10:39 01/01/1970] [CmDocsisCtlThread]
BcmCmMdDsSgDiscState::TrimSgSetWithoutThisDcid:
1 candidate MD-DS-SG remain after TrimSgSetWithoutThisDcid( target_dcid )
for target_dcid=0x13 (19)
[01:10:39 01/01/1970] [CmDocsisCtlThread] BcmCmMdDsSgDiscState::StartMdDsSgDisc:
special case: one and only one MD-DS-SG contains mdd_dcid.
fMdDsSgId=0x1d (29)
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , M-d++a+i-+Ty-eA+dA++e|:
i_L-ca+A++e|A: 1
Chec+ +D_A++e|A
Cha++e+ Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1

MD-DS-SG discovery info:

fCmMdDsSgDiscState = 6 (kMdDsSgDiscDone)
fMdDsSgId = 0x1d (29)
fMdDsSgDiscovered = true

Trimmed Candidate Downstream Service Group Settings List: list size = 1

sgid size member dcid's


---- ---- -------------
29 34 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
27 28 29 30 31 32 159 160

Downstream Active Channel Settings List:

dcid type frequency prim capable rpt enable mod/annex or PLC params
---- -------- --------- ------------ ---------- -----------------------
1 SC-QAM 531000000 y 0x36 256QAM/AnnexA
2 SC-QAM 539000000 y 0x36 256QAM/AnnexA
3 SC-QAM 547000000 y 0x36 256QAM/AnnexA
4 SC-QAM 555000000 y 0x36 256QAM/AnnexA
5 SC-QAM 563000000 y 0x36 256QAM/AnnexA
6 SC-QAM 571000000 y 0x36 256QAM/AnnexA
7 SC-QAM 579000000 y 0x36 256QAM/AnnexA
8 SC-QAM 587000000 y 0x36 256QAM/AnnexA
9 SC-QAM 595000000 y 0x36 256QAM/AnnexA
10 SC-QAM 603000000 y 0x36 256QAM/AnnexA
11 SC-QAM 611000000 y 0x36 256QAM/AnnexA
12 SC-QAM 619000000 y 0x36 256QAM/AnnexA
13 SC-QAM 627000000 y 0x36 256QAM/AnnexA
14 SC-QAM 635000000 y 0x36 256QAM/AnnexA
15 SC-QAM 643000000 y 0x36 256QAM/AnnexA
16 SC-QAM 651000000 y 0x36 256QAM/AnnexA
17 SC-QAM 659000000 y 0x36 256QAM/AnnexA
18 SC-QAM 667000000 y 0x36 256QAM/AnnexA
19 SC-QAM 675000000 y 0x36 256QAM/AnnexA
20 SC-QAM 683000000 y 0x36 256QAM/AnnexA
21 SC-QAM 691000000 y 0x36 256QAM/AnnexA
22 SC-QAM 699000000 y 0x36 256QAM/AnnexA
23 SC-QAM 707000000 y 0x36 256QAM/AnnexA
24 SC-QAM 715000000 y 0x36 256QAM/AnnexA
25 SC-QAM 723000000 y 0x36 256QAM/AnnexA
26 SC-QAM 731000000 y 0x36 256QAM/AnnexA
27 SC-QAM 739000000 y 0x36 256QAM/AnnexA
28 SC-QAM 747000000 y 0x36 256QAM/AnnexA
29 SC-QAM 755000000 y 0x36 256QAM/AnnexA
30 SC-QAM 763000000 y 0x36 256QAM/AnnexA
31 SC-QAM 771000000 y 0x36 256QAM/AnnexA
32 SC-QAM 779000000 y 0x36 256QAM/AnnexA
159 OFDM PLC 897000000 n 0x36 25Khz/5us/0.625us
160 OFDM PLC 361000000 n 0x36 50Khz/0.9375us/0.625us

Trimmed Downstream Ambiguity Resolution Frequency List: list size = 3

531000000-sc_qam 539000000-sc_qam 547000000-sc_qam

visible dcid set = 19

freq with visible dcid set = 675000000

BcmCmDocsisCtlMsgACT::HandleEvent() @time=4240350 event_code=11


(kCmMdDsSgDiscDone)
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=true
[01:10:40 01/01/1970] [CmDocsisCtlThread]
BcmDocsisCmHalIf::SetPrimaryDownstreamChannel: (DOCSIS CableModem HalIf)
Installing primary downstream channel index: 0
SetRatios called with primary downstream channel number = 0
AnnexMode[0] = 1 QAM_Mode[0] = 256
Num/Den = 869/1280
3390 SCDMA/OFDM mode - ChannelNumber = 0 Numerator = 869 Denominator = 1280
CM/DocsisCtl> [01:10:40 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL failed to acquire sync or lost sync!
... TCOFDM - DTR is now locked.... (T2=150ms Sync=14)

Given a 216 MHz TCOFDM clock, the nominal value for the DTR FCW is 0xC22E45067
The DTR FCW is 0xc22e8e93 - that value is good (5, within 100 ppm)
Kicked off the DPLL
LE Done bit was set
LE Done bit was set
SCQAM DS clock source.
PLL in Leaky mode.
PLL Fn = 6, k1 = 18, k2 = 19
[01:10:40 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context=1 (ErrorRecovery)
[01:10:40 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context is error recovery or startup.
Always use last good upstream target chan id=1
[01:10:40 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper) Locked on the downstream. Waiting for UCDs...
[01:10:40 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefFail: (Cm
Multi US Helper) target hwTxId=0
CM/DocsisCtl> [01:10:42 01/01/1970] [CmDocsisCtlThread]
BcmCmMultiUsHelper::TmUcdRxTimerEvent: (Cm Multi US Helper)
ucd gathering ok.
[01:10:42 01/01/1970] [CmDocsisCtlThread]
BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper) state at
entry:

Channel targeting:
Downstream:
fTargetDsFreqHz = 0 (0)
fCurrentDsFreqHz = 0x283baec0 (675000000)
fStoredDsFreqHz = 0x29020c00 (688000000)

Upstream:
fDestSingleTxTargetUsChanId = 0x1 (1)
fTargetingContext = 1 (ErrorRecovery)

Startup UCD Selection Info:

low priority candidate ucid list = 2 1 4 3 7 5 8 6


happy home ucid set = 1 2 3 4

Upstream Active Channel Settings:

ucid rpt enable sel prio MAP source dcid's


---- ---------- -------- -----------------
1 0x1c0 0
2 0x1c0 0
3 0x1c0 0
4 0x1c0 0
5 0x1c0 0
6 0x1c0 0
7 0x1c0 0
8 0x1c0 0

BcmCmUsTargetMset (a.k.a. usable UCDs gathered during startup):

us config
phy change ranging scdma
type ucid dcid count tried? enabled?
---- ---- ---- ------ ------- --------
3 1 19 4 n n
3 2 19 4 n n
3 3 19 4 n n
3 4 19 4 n n
3 5 19 4 n n
3 6 19 4 n n
3 7 19 4 n n
3 8 19 4 n n

[01:10:42 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper)
starting docs3 upstream initialization on target ucid=2
with upstream phy type 3 on hardware transmitter index 0

[01:10:42 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::ExecuteTccCmd: hwTxId=0


docs ucid=0
[01:10:42 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0
[01:10:42 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::InstallUsSets: Installing
UCD w/ucid for UCID=2 for CM hardware tx chan 0

[01:10:42 01/01/1970] [CmDocsisCtlThread]


BcmCmUsSetsState::TestAndLaunchUsTimeSync: starting upstream time sync
acquisition...
[01:10:42 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefOk: (Cm
Multi US Helper) target hwTxId=0
[01:10:42 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::UsTimeRefOk: upstream time
sync acquired for fHwTxId=0

== Beginning initial ranging for Docsis UCID 2 ==


Minimum transmit power is 17 dBmV
Maximum transmit power is 53 dBmV
Stored power level for UCID 2 is 38 dBmV
Using per transmitter stored initial upstream power = 38 dBmV hwTxId = 0 docsis
UCID = 2
RNG-RSP UsChanId=2 Adj: tim=1894 freq=12 Stat=Continue (CmdPwr (UsChanId-dBmV):
(2-40.50) )
[01:10:43 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0xc9
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (2-
41.00) )
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (2-
41.00) )
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (2-
41.00) )
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (2-
41.00) )
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Success (CmdPwr (UsChanId-dBmV): (2-
41.00) )
[01:10:48 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::FirstRngSuccess:
(CmDocsisCtlThread)
first RNG-RSP w/status==SUCCESS for hwTxId=0 and DOCSIS ucid=2
[01:10:48 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::LaunchEaeBpkm:
(CmDocsisCtlThread) BPKM enabled. starting Early Authentication and Encryption BPKM
key requests. Primary Sid = 201
CM/DocsisCtl> Bandwidth request failure! Status = 0

BcmCmUsChanTimerMuxACT::HandleEvent() @time=4438270 fTimerType=5


(kT4NoStationMaint) hwTxId=0 docs ucid=2
[01:13:58 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::T4NoStationMaintEvent: ERROR - no Station Maint map op error.
hwTxId=0 docs ucid=2
[01:13:58 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::CommonRngErrorHandler: reason=10 (T4NoStationMaintTimeout)
hwTxId=0 docs ucid=2
[01:13:58 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) Purging DS
frequency 675000000 from current scan pass due to pre-registration restart error
[01:13:58 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) reinit MAC #21:
T4NoStationMaintTimeout

[01:13:58 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::Reset:


(CmDocsisCtlThread) DefaultSnmpAgentClass::RestartPendingEvent for Vendor CM
Agent w/ BRCM Factory Support
Logging event: Received Response to Broadcast Maintenance Request, But no Unicast
Maintenance opportunities received - T4 time out;CM-MAC=fc:4a:e9:de:ad:88;CMTS-
MAC=28:52:61:fa:d8:78;CM-QOS=1.1;CM-VER=3.1;
Vendor CM Agent w/ BRCM Factory Support updating ifTableLastChange.
Vendor CM Agent w/ BRCM Factory Support resetting to default state.
Vendor CM Agent w/ BRCM Factory Support destroying users...
Vendor CM Agent w/ BRCM Factory Support destroying notifies...
Vendor CM Agent w/ BRCM Factory Support destroying views...
Allowing DOCS-CABLE-DEVICE-MIB IP filters.
Vendor CM Agent w/ BRCM Factory Support deferring traps.
Received RG Event 0x80000001 State 0x1
eRouter Linux WAN Down
[01:13:58 01/01/1970] [eRouterMsgPipe] eRouterMsgPipe::UpdateIpNetToMediaEntry:
(eRouterMsgPipe) eRouter IP address:0.0.0.0
01:13:58.560 01/01/1970 (CALC) mtaCmStatusInfo() - MTA is Signaled: *NOT-
OPERATIONAL* (Stat=0x1) emtaCurState = 0.
EmtaSnmpAgent::SoftReset
Pausing trap thread
emta factory agentResetting to default state.
emta factory agent destroying users...
emta factory agent destroying notifies...
emta factory agent destroying views...
emta factory agent entering RFC-2576 Coexistence security mode.
emta factory agent entering Basic/Hybrid flow provisioning mode.
Resuming trap thread
Stopping DHCP/ToD/TFTP (client requested)...
[01:13:58 01/01/1970] [CmDocsisIpThread] BcmEcosIpHalIf::RemoveIpv6Address: (IP
Stack1 HalIf) ERROR - Failed to remove IPv6 address fe80::fe4a:e9ff:fede:ad88/64
from the stack!
[01:13:58 01/01/1970] [CmDocsisIpThread] BcmDhcpV6ClientIf::ReleaseAddresses:
(DHCPv6 ClientIf for IP Stack1) ERROR - IA state is initial; there is no address to
release.
BcmDocsis3DsMacEnableMulticastDsidForwarding 0; primary DS = 0
SCQAM DSID filter control = 0x00
OFDM DSID filter control = 0x01
Deleting DOCSIS 1.0 CoS Settings for SID 0xc9
[01:13:58 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows:
(DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along
with associated Classifiers and PHS rules...
[01:13:58 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState:
(CmDocsisCtlThread)
[01:13:58 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Primary SID for usHwChannel 0 to 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 1
Updating US chan 8 data Profile test msg for Sid: 0x0.
Updating US chan 9 data Profile test msg for Sid: 0x0.
CM/DocsisCtl> [01:13:59 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL declared PULSE lost!
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=false
[01:13:59 01/01/1970] [CmDocsisCtlThread] BcmCmMultiDsHelper::PreRegDsChanChange:
target freq hz = 0
reason string = ErrorRecovery
CmInitReason = 16

Starting DS scanning...
[01:13:59 01/01/1970] [CmDocsisCtlThread] BcmCmDownstreamScan::StartScan: Starting
DS scan
Checking for cable cut...

CM/DocsisCtl> Plant power is 15.55

Cable connected

CM/DocsisCtl> Scanning 676.000 MHz SC-QAM (Annex A(Eu.1M))


Scanning 677.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 678.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 679.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 680.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 681.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 682.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 683.000 MHz SC-QAM (Annex A(Eu.1M)) locked SC-QAM
[01:14:02 01/01/1970] [CmDocsisCtlThread] BcmCmDsChan::DsLockOk: (BcmCmDsChan 0)
hwRxId=0 freq=0 dcid=0

******************************************
DOWNSTREAM STATUS
******************************************
HW Channel ID = 0
Phy type: SC-QAM
DS active chan settings:
ds chan id = 0
center freq, Hz = 683000000 Hz
primary capable = false
status event rpt bitmask = 0

CM HW Detected DS Phy Settings:


Center Freq, Hz = 683000000
QAM = Locked
FEC = Locked
Carrier Freq Offset, kHz = 0
Channel Width, Hz = 8000000
Modulation = Qam256
Interleaver = Taps12Incr17
Symbol Rate, sym/sec = 6952000

******************************************

[01:14:02 01/01/1970] [CmDocsisCtlThread]


BcmCmMacDomainSetsState::StartDsMacMddInit:
**********************************************
Waiting for MDDs...
**********************************************

CM/DocsisCtl>
BcmCmDocsisCtlMsgACT::HandleEvent() @time=4443750 event_code=4 (kCmPriDsMddSetsOk)

MDD diplexer band edge not specified.


MDD Plant US Frequency Range = extended.
Requested Spectrum = US:(0 MHz..85 MHz) DS:(0 MHz..0 MHz)
Best Match = 0: US:(5 MHz..85 MHz) DS:(108 MHz..1218 MHz)
Switchable diplexer ECN support disabled. NOT switching diplexer.
[01:14:03 01/01/1970] [CmDocsisCtlThread]
BcmCmMdDsSgDiscState::TrimSgSetWithoutThisDcid:
1 candidate MD-DS-SG remain after TrimSgSetWithoutThisDcid( target_dcid )
for target_dcid=0x14 (20)
[01:14:03 01/01/1970] [CmDocsisCtlThread] BcmCmMdDsSgDiscState::StartMdDsSgDisc:
special case: one and only one MD-DS-SG contains mdd_dcid.
fMdDsSgId=0x1d (29)
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , M-d++a+i-+Ty-eA+dA++e|:
i_L-ca+A++e|A: 1
Chec+ +D_A++e|A
Cha++e+ Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1

MD-DS-SG discovery info:

fCmMdDsSgDiscState = 6 (kMdDsSgDiscDone)
fMdDsSgId = 0x1d (29)
fMdDsSgDiscovered = true

Trimmed Candidate Downstream Service Group Settings List: list size = 1


sgid size member dcid's
---- ---- -------------
29 34 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
27 28 29 30 31 32 159 160

Downstream Active Channel Settings List:

dcid type frequency prim capable rpt enable mod/annex or PLC params
---- -------- --------- ------------ ---------- -----------------------
1 SC-QAM 531000000 y 0x36 256QAM/AnnexA
2 SC-QAM 539000000 y 0x36 256QAM/AnnexA
3 SC-QAM 547000000 y 0x36 256QAM/AnnexA
4 SC-QAM 555000000 y 0x36 256QAM/AnnexA
5 SC-QAM 563000000 y 0x36 256QAM/AnnexA
6 SC-QAM 571000000 y 0x36 256QAM/AnnexA
7 SC-QAM 579000000 y 0x36 256QAM/AnnexA
8 SC-QAM 587000000 y 0x36 256QAM/AnnexA
9 SC-QAM 595000000 y 0x36 256QAM/AnnexA
10 SC-QAM 603000000 y 0x36 256QAM/AnnexA
11 SC-QAM 611000000 y 0x36 256QAM/AnnexA
12 SC-QAM 619000000 y 0x36 256QAM/AnnexA
13 SC-QAM 627000000 y 0x36 256QAM/AnnexA
14 SC-QAM 635000000 y 0x36 256QAM/AnnexA
15 SC-QAM 643000000 y 0x36 256QAM/AnnexA
16 SC-QAM 651000000 y 0x36 256QAM/AnnexA
17 SC-QAM 659000000 y 0x36 256QAM/AnnexA
18 SC-QAM 667000000 y 0x36 256QAM/AnnexA
19 SC-QAM 675000000 y 0x36 256QAM/AnnexA
20 SC-QAM 683000000 y 0x36 256QAM/AnnexA
21 SC-QAM 691000000 y 0x36 256QAM/AnnexA
22 SC-QAM 699000000 y 0x36 256QAM/AnnexA
23 SC-QAM 707000000 y 0x36 256QAM/AnnexA
24 SC-QAM 715000000 y 0x36 256QAM/AnnexA
25 SC-QAM 723000000 y 0x36 256QAM/AnnexA
26 SC-QAM 731000000 y 0x36 256QAM/AnnexA
27 SC-QAM 739000000 y 0x36 256QAM/AnnexA
28 SC-QAM 747000000 y 0x36 256QAM/AnnexA
29 SC-QAM 755000000 y 0x36 256QAM/AnnexA
30 SC-QAM 763000000 y 0x36 256QAM/AnnexA
31 SC-QAM 771000000 y 0x36 256QAM/AnnexA
32 SC-QAM 779000000 y 0x36 256QAM/AnnexA
159 OFDM PLC 897000000 n 0x36 25Khz/5us/0.625us
160 OFDM PLC 361000000 n 0x36 50Khz/0.9375us/0.625us

Trimmed Downstream Ambiguity Resolution Frequency List: list size = 3

531000000-sc_qam 539000000-sc_qam 547000000-sc_qam

visible dcid set = 20

freq with visible dcid set = 683000000

BcmCmDocsisCtlMsgACT::HandleEvent() @time=4444350 event_code=11


(kCmMdDsSgDiscDone)
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=true
[01:14:04 01/01/1970] [CmDocsisCtlThread]
BcmDocsisCmHalIf::SetPrimaryDownstreamChannel: (DOCSIS CableModem HalIf)
Installing primary downstream channel index: 0
SetRatios called with primary downstream channel number = 0
AnnexMode[0] = 1 QAM_Mode[0] = 256
Num/Den = 869/1280
3390 SCDMA/OFDM mode - ChannelNumber = 0 Numerator = 869 Denominator = 1280
CM/DocsisCtl> [01:14:04 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL failed to acquire sync or lost sync!
... TCOFDM - DTR is now locked.... (T2=150ms Sync=14)

Given a 216 MHz TCOFDM clock, the nominal value for the DTR FCW is 0xC22E45067
The DTR FCW is 0xc22e8e93 - that value is good (5, within 100 ppm)
Kicked off the DPLL
LE Done bit was set
LE Done bit was set
SCQAM DS clock source.
PLL in Leaky mode.
PLL Fn = 6, k1 = 18, k2 = 19
[01:14:04 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context=1 (ErrorRecovery)
[01:14:04 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context is error recovery or startup.
Always use last good upstream target chan id=1
[01:14:04 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper) Locked on the downstream. Waiting for UCDs...
[01:14:04 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefFail: (Cm
Multi US Helper) target hwTxId=0
CM/DocsisCtl> [01:14:06 01/01/1970] [CmDocsisCtlThread]
BcmCmMultiUsHelper::TmUcdRxTimerEvent: (Cm Multi US Helper)
ucd gathering ok.

[01:14:06 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper) state at
entry:

Channel targeting:
Downstream:
fTargetDsFreqHz = 0 (0)
fCurrentDsFreqHz = 0x28b5c0c0 (683000000)
fStoredDsFreqHz = 0x29020c00 (688000000)

Upstream:
fDestSingleTxTargetUsChanId = 0x1 (1)
fTargetingContext = 1 (ErrorRecovery)

Startup UCD Selection Info:

low priority candidate ucid list = 4 2 1 3 7 5 6 8


happy home ucid set = 1 2 3 4

Upstream Active Channel Settings:

ucid rpt enable sel prio MAP source dcid's


---- ---------- -------- -----------------
1 0x1c0 0
2 0x1c0 0
3 0x1c0 0
4 0x1c0 0
5 0x1c0 0
6 0x1c0 0
7 0x1c0 0
8 0x1c0 0

BcmCmUsTargetMset (a.k.a. usable UCDs gathered during startup):

us config
phy change ranging scdma
type ucid dcid count tried? enabled?
---- ---- ---- ------ ------- --------
3 1 20 4 n n
3 2 20 4 n n
3 3 20 4 n n
3 4 20 4 n n
3 5 20 4 n n
3 6 20 4 n n
3 7 20 4 n n
3 8 20 4 n n

[01:14:06 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper)
starting docs3 upstream initialization on target ucid=4
with upstream phy type 3 on hardware transmitter index 0

[01:14:06 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::ExecuteTccCmd: hwTxId=0


docs ucid=0
[01:14:06 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0
[01:14:06 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::InstallUsSets: Installing
UCD w/ucid for UCID=4 for CM hardware tx chan 0

[01:14:06 01/01/1970] [CmDocsisCtlThread]


BcmCmUsSetsState::TestAndLaunchUsTimeSync: starting upstream time sync
acquisition...
[01:14:06 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefOk: (Cm
Multi US Helper) target hwTxId=0
[01:14:06 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::UsTimeRefOk: upstream time
sync acquired for fHwTxId=0

== Beginning initial ranging for Docsis UCID 4 ==


Minimum transmit power is 17 dBmV
Maximum transmit power is 53 dBmV
Stored power level for UCID 4 is 42 dBmV
Using per transmitter stored initial upstream power = 42 dBmV hwTxId = 0 docsis
UCID = 4
RNG-RSP UsChanId=4 Adj: tim=1928 freq=-14 Stat=Continue (CmdPwr (UsChanId-dBmV):
(4-41.75) )
[01:14:07 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0xc9
RNG-RSP UsChanId=4 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (4-
41.75) )
RNG-RSP UsChanId=4 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (4-
41.75) )
RNG-RSP UsChanId=4 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (4-
41.75) )
RNG-RSP UsChanId=4 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (4-
41.75) )
RNG-RSP UsChanId=4 Adj: tim=0 freq=0 Stat=Success (CmdPwr (UsChanId-dBmV): (4-
41.75) )
[01:14:12 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::FirstRngSuccess:
(CmDocsisCtlThread)
first RNG-RSP w/status==SUCCESS for hwTxId=0 and DOCSIS ucid=4
[01:14:12 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::LaunchEaeBpkm:
(CmDocsisCtlThread) BPKM enabled. starting Early Authentication and Encryption BPKM
key requests. Primary Sid = 201
CM/DocsisCtl> Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0

BcmCmUsChanTimerMuxACT::HandleEvent() @time=4642550 fTimerType=5


(kT4NoStationMaint) hwTxId=0 docs ucid=4
[01:17:22 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::T4NoStationMaintEvent: ERROR - no Station Maint map op error.
hwTxId=0 docs ucid=4
[01:17:22 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::CommonRngErrorHandler: reason=10 (T4NoStationMaintTimeout)
hwTxId=0 docs ucid=4
[01:17:22 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) Purging DS
frequency 683000000 from current scan pass due to pre-registration restart error
[01:17:22 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) reinit MAC #22:
T4NoStationMaintTimeout

[01:17:22 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::Reset:


(CmDocsisCtlThread) DefaultSnmpAgentClass::RestartPendingEvent for Vendor CM
Agent w/ BRCM Factory Support
Logging event: Received Response to Broadcast Maintenance Request, But no Unicast
Maintenance opportunities received - T4 time out;CM-MAC=fc:4a:e9:de:ad:88;CMTS-
MAC=28:52:61:fa:d8:78;CM-QOS=1.1;CM-VER=3.1;
Vendor CM Agent w/ BRCM Factory Support updating ifTableLastChange.
Vendor CM Agent w/ BRCM Factory Support resetting to default state.
Vendor CM Agent w/ BRCM Factory Support destroying users...
Vendor CM Agent w/ BRCM Factory Support destroying notifies...
Vendor CM Agent w/ BRCM Factory Support destroying views...
Allowing DOCS-CABLE-DEVICE-MIB IP filters.
Vendor CM Agent w/ BRCM Factory Support deferring traps.
Received RG Event 0x80000001 State 0x1
eRouter Linux WAN Down
[01:17:22 01/01/1970] [eRouterMsgPipe] eRouterMsgPipe::UpdateIpNetToMediaEntry:
(eRouterMsgPipe) eRouter IP address:0.0.0.0
01:17:22.840 01/01/1970 (CALC) mtaCmStatusInfo() - MTA is Signaled: *NOT-
OPERATIONAL* (Stat=0x1) emtaCurState = 0.
EmtaSnmpAgent::SoftReset
Pausing trap thread
emta factory agentResetting to default state.
emta factory agent destroying users...
emta factory agent destroying notifies...
emta factory agent destroying views...
emta factory agent entering RFC-2576 Coexistence security mode.
emta factory agent entering Basic/Hybrid flow provisioning mode.
Resuming trap thread
Stopping DHCP/ToD/TFTP (client requested)...
[01:17:22 01/01/1970] [CmDocsisIpThread] BcmEcosIpHalIf::RemoveIpv6Address: (IP
Stack1 HalIf) ERROR - Failed to remove IPv6 address fe80::fe4a:e9ff:fede:ad88/64
from the stack!
[01:17:22 01/01/1970] [CmDocsisIpThread] BcmDhcpV6ClientIf::ReleaseAddresses:
(DHCPv6 ClientIf for IP Stack1) ERROR - IA state is initial; there is no address to
release.
BcmDocsis3DsMacEnableMulticastDsidForwarding 0; primary DS = 0
SCQAM DSID filter control = 0x00
OFDM DSID filter control = 0x01
Deleting DOCSIS 1.0 CoS Settings for SID 0xc9
[01:17:23 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows:
(DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along
with associated Classifiers and PHS rules...
[01:17:23 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState:
(CmDocsisCtlThread)
[01:17:23 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Primary SID for usHwChannel 0 to 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 1
Updating US chan 8 data Profile test msg for Sid: 0x0.
Updating US chan 9 data Profile test msg for Sid: 0x0.
CM/DocsisCtl> [01:17:23 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL declared PULSE lost!
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=false
[01:17:24 01/01/1970] [CmDocsisCtlThread] BcmCmMultiDsHelper::PreRegDsChanChange:
target freq hz = 0
reason string = ErrorRecovery
CmInitReason = 16

Starting DS scanning...
[01:17:24 01/01/1970] [CmDocsisCtlThread] BcmCmDownstreamScan::StartScan: Starting
DS scan
Checking for cable cut...

CM/DocsisCtl> Plant power is 15.55

Cable connected

CM/DocsisCtl> Scanning 684.000 MHz SC-QAM (Annex A(Eu.1M))


Scanning 685.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 686.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 687.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 688.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 689.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 690.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 691.000 MHz SC-QAM (Annex A(Eu.1M)) locked SC-QAM
[01:17:27 01/01/1970] [CmDocsisCtlThread] BcmCmDsChan::DsLockOk: (BcmCmDsChan 0)
hwRxId=0 freq=0 dcid=0

******************************************
DOWNSTREAM STATUS
******************************************
HW Channel ID = 0
Phy type: SC-QAM
DS active chan settings:
ds chan id = 0
center freq, Hz = 691000000 Hz
primary capable = false
status event rpt bitmask = 0

CM HW Detected DS Phy Settings:


Center Freq, Hz = 691000000
QAM = Locked
FEC = Locked
Carrier Freq Offset, kHz = 0
Channel Width, Hz = 8000000
Modulation = Qam256
Interleaver = Taps12Incr17
Symbol Rate, sym/sec = 6952000

******************************************

[01:17:27 01/01/1970] [CmDocsisCtlThread]


BcmCmMacDomainSetsState::StartDsMacMddInit:
**********************************************
Waiting for MDDs...
**********************************************

CM/DocsisCtl>
BcmCmDocsisCtlMsgACT::HandleEvent() @time=4647760 event_code=4 (kCmPriDsMddSetsOk)

MDD diplexer band edge not specified.


MDD Plant US Frequency Range = extended.
Requested Spectrum = US:(0 MHz..85 MHz) DS:(0 MHz..0 MHz)
Best Match = 0: US:(5 MHz..85 MHz) DS:(108 MHz..1218 MHz)
Switchable diplexer ECN support disabled. NOT switching diplexer.
[01:17:27 01/01/1970] [CmDocsisCtlThread]
BcmCmMdDsSgDiscState::TrimSgSetWithoutThisDcid:
1 candidate MD-DS-SG remain after TrimSgSetWithoutThisDcid( target_dcid )
for target_dcid=0x15 (21)
[01:17:27 01/01/1970] [CmDocsisCtlThread] BcmCmMdDsSgDiscState::StartMdDsSgDisc:
special case: one and only one MD-DS-SG contains mdd_dcid.
fMdDsSgId=0x1d (29)
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , M-d++a+i-+Ty-eA+dA++e|:
i_L-ca+A++e|A: 1
Chec+ +D_A++e|A
Cha++e+ Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1

MD-DS-SG discovery info:

fCmMdDsSgDiscState = 6 (kMdDsSgDiscDone)
fMdDsSgId = 0x1d (29)
fMdDsSgDiscovered = true

Trimmed Candidate Downstream Service Group Settings List: list size = 1

sgid size member dcid's


---- ---- -------------
29 34 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
27 28 29 30 31 32 159 160

Downstream Active Channel Settings List:

dcid type frequency prim capable rpt enable mod/annex or PLC params
---- -------- --------- ------------ ---------- -----------------------
1 SC-QAM 531000000 y 0x36 256QAM/AnnexA
2 SC-QAM 539000000 y 0x36 256QAM/AnnexA
3 SC-QAM 547000000 y 0x36 256QAM/AnnexA
4 SC-QAM 555000000 y 0x36 256QAM/AnnexA
5 SC-QAM 563000000 y 0x36 256QAM/AnnexA
6 SC-QAM 571000000 y 0x36 256QAM/AnnexA
7 SC-QAM 579000000 y 0x36 256QAM/AnnexA
8 SC-QAM 587000000 y 0x36 256QAM/AnnexA
9 SC-QAM 595000000 y 0x36 256QAM/AnnexA
10 SC-QAM 603000000 y 0x36 256QAM/AnnexA
11 SC-QAM 611000000 y 0x36 256QAM/AnnexA
12 SC-QAM 619000000 y 0x36 256QAM/AnnexA
13 SC-QAM 627000000 y 0x36 256QAM/AnnexA
14 SC-QAM 635000000 y 0x36 256QAM/AnnexA
15 SC-QAM 643000000 y 0x36 256QAM/AnnexA
16 SC-QAM 651000000 y 0x36 256QAM/AnnexA
17 SC-QAM 659000000 y 0x36 256QAM/AnnexA
18 SC-QAM 667000000 y 0x36 256QAM/AnnexA
19 SC-QAM 675000000 y 0x36 256QAM/AnnexA
20 SC-QAM 683000000 y 0x36 256QAM/AnnexA
21 SC-QAM 691000000 y 0x36 256QAM/AnnexA
22 SC-QAM 699000000 y 0x36 256QAM/AnnexA
23 SC-QAM 707000000 y 0x36 256QAM/AnnexA
24 SC-QAM 715000000 y 0x36 256QAM/AnnexA
25 SC-QAM 723000000 y 0x36 256QAM/AnnexA
26 SC-QAM 731000000 y 0x36 256QAM/AnnexA
27 SC-QAM 739000000 y 0x36 256QAM/AnnexA
28 SC-QAM 747000000 y 0x36 256QAM/AnnexA
29 SC-QAM 755000000 y 0x36 256QAM/AnnexA
30 SC-QAM 763000000 y 0x36 256QAM/AnnexA
31 SC-QAM 771000000 y 0x36 256QAM/AnnexA
32 SC-QAM 779000000 y 0x36 256QAM/AnnexA
159 OFDM PLC 897000000 n 0x36 25Khz/5us/0.625us
160 OFDM PLC 361000000 n 0x36 50Khz/0.9375us/0.625us

Trimmed Downstream Ambiguity Resolution Frequency List: list size = 3

531000000-sc_qam 539000000-sc_qam 547000000-sc_qam

visible dcid set = 21

freq with visible dcid set = 691000000

BcmCmDocsisCtlMsgACT::HandleEvent() @time=4648350 event_code=11


(kCmMdDsSgDiscDone)
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=true
[01:17:28 01/01/1970] [CmDocsisCtlThread]
BcmDocsisCmHalIf::SetPrimaryDownstreamChannel: (DOCSIS CableModem HalIf)
Installing primary downstream channel index: 0
SetRatios called with primary downstream channel number = 0
AnnexMode[0] = 1 QAM_Mode[0] = 256
Num/Den = 869/1280
3390 SCDMA/OFDM mode - ChannelNumber = 0 Numerator = 869 Denominator = 1280
CM/DocsisCtl> [01:17:28 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL failed to acquire sync or lost sync!
... TCOFDM - DTR is now locked.... (T2=150ms Sync=14)

Given a 216 MHz TCOFDM clock, the nominal value for the DTR FCW is 0xC22E45067
The DTR FCW is 0xc22e8fd7 - that value is good (5, within 100 ppm)
Kicked off the DPLL
LE Done bit was set
LE Done bit was set
SCQAM DS clock source.
PLL in Leaky mode.
PLL Fn = 6, k1 = 18, k2 = 19
[01:17:28 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context=1 (ErrorRecovery)
[01:17:28 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context is error recovery or startup.
Always use last good upstream target chan id=1
[01:17:28 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper) Locked on the downstream. Waiting for UCDs...
[01:17:28 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefFail: (Cm
Multi US Helper) target hwTxId=0
CM/DocsisCtl> [01:17:30 01/01/1970] [CmDocsisCtlThread]
BcmCmMultiUsHelper::TmUcdRxTimerEvent: (Cm Multi US Helper)
ucd gathering ok.

[01:17:30 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper) state at
entry:

Channel targeting:
Downstream:
fTargetDsFreqHz = 0 (0)
fCurrentDsFreqHz = 0x292fd2c0 (691000000)
fStoredDsFreqHz = 0x29020c00 (688000000)

Upstream:
fDestSingleTxTargetUsChanId = 0x1 (1)
fTargetingContext = 1 (ErrorRecovery)

Startup UCD Selection Info:

low priority candidate ucid list = 3 2 1 4 5 6 7 8


happy home ucid set = 1 2 3 4

Upstream Active Channel Settings:

ucid rpt enable sel prio MAP source dcid's


---- ---------- -------- -----------------
1 0x1c0 0
2 0x1c0 0
3 0x1c0 0
4 0x1c0 0
5 0x1c0 0
6 0x1c0 0
7 0x1c0 0
8 0x1c0 0

BcmCmUsTargetMset (a.k.a. usable UCDs gathered during startup):

us config
phy change ranging scdma
type ucid dcid count tried? enabled?
---- ---- ---- ------ ------- --------
3 1 21 4 n n
3 2 21 4 n n
3 3 21 4 n n
3 4 21 4 n n
3 5 21 4 n n
3 6 21 4 n n
3 7 21 4 n n
3 8 21 4 n n
[01:17:30 01/01/1970] [CmDocsisCtlThread]
BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper)
starting docs3 upstream initialization on target ucid=3
with upstream phy type 3 on hardware transmitter index 0

[01:17:30 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::ExecuteTccCmd: hwTxId=0


docs ucid=0
[01:17:30 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0
[01:17:30 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::InstallUsSets: Installing
UCD w/ucid for UCID=3 for CM hardware tx chan 0

[01:17:30 01/01/1970] [CmDocsisCtlThread]


BcmCmUsSetsState::TestAndLaunchUsTimeSync: starting upstream time sync
acquisition...
[01:17:30 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefOk: (Cm
Multi US Helper) target hwTxId=0
[01:17:30 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::UsTimeRefOk: upstream time
sync acquired for fHwTxId=0

== Beginning initial ranging for Docsis UCID 3 ==


Minimum transmit power is 17 dBmV
Maximum transmit power is 53 dBmV
Stored power level for UCID 3 is 38 dBmV
Using per transmitter stored initial upstream power = 38 dBmV hwTxId = 0 docsis
UCID = 3
RNG-RSP UsChanId=3 Adj: tim=1917 freq=17 Stat=Continue (CmdPwr (UsChanId-dBmV):
(3-40.75) )
[01:17:31 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0xc9
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (3-
41.25) )
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (3-
41.25) )
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (3-
41.25) )
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (3-
41.25) )
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Success (CmdPwr (UsChanId-dBmV): (3-
41.25) )
[01:17:36 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::FirstRngSuccess:
(CmDocsisCtlThread)
first RNG-RSP w/status==SUCCESS for hwTxId=0 and DOCSIS ucid=3
[01:17:36 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::LaunchEaeBpkm:
(CmDocsisCtlThread) BPKM enabled. starting Early Authentication and Encryption BPKM
key requests. Primary Sid = 201
CM/DocsisCtl> Bandwidth request failure! Status = 0

BcmCmUsChanTimerMuxACT::HandleEvent() @time=4846080 fTimerType=5


(kT4NoStationMaint) hwTxId=0 docs ucid=3
[01:20:46 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::T4NoStationMaintEvent: ERROR - no Station Maint map op error.
hwTxId=0 docs ucid=3
[01:20:46 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::CommonRngErrorHandler: reason=10 (T4NoStationMaintTimeout)
hwTxId=0 docs ucid=3
[01:20:46 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) Purging DS
frequency 691000000 from current scan pass due to pre-registration restart error
[01:20:46 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) reinit MAC #23:
T4NoStationMaintTimeout

[01:20:46 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::Reset:


(CmDocsisCtlThread) DefaultSnmpAgentClass::RestartPendingEvent for Vendor CM
Agent w/ BRCM Factory Support
Logging event: Received Response to Broadcast Maintenance Request, But no Unicast
Maintenance opportunities received - T4 time out;CM-MAC=fc:4a:e9:de:ad:88;CMTS-
MAC=28:52:61:fa:d8:78;CM-QOS=1.1;CM-VER=3.1;
Vendor CM Agent w/ BRCM Factory Support updating ifTableLastChange.
Vendor CM Agent w/ BRCM Factory Support resetting to default state.
Vendor CM Agent w/ BRCM Factory Support destroying users...
Vendor CM Agent w/ BRCM Factory Support destroying notifies...
Vendor CM Agent w/ BRCM Factory Support destroying views...
Allowing DOCS-CABLE-DEVICE-MIB IP filters.
Vendor CM Agent w/ BRCM Factory Support deferring traps.
Received RG Event 0x80000001 State 0x1
eRouter Linux WAN Down
[01:20:46 01/01/1970] [eRouterMsgPipe] eRouterMsgPipe::UpdateIpNetToMediaEntry:
(eRouterMsgPipe) eRouter IP address:0.0.0.0
01:20:46.370 01/01/1970 (CALC) mtaCmStatusInfo() - MTA is Signaled: *NOT-
OPERATIONAL* (Stat=0x1) emtaCurState = 0.
EmtaSnmpAgent::SoftReset
Pausing trap thread
emta factory agentResetting to default state.
emta factory agent destroying users...
emta factory agent destroying notifies...
emta factory agent destroying views...
emta factory agent entering RFC-2576 Coexistence security mode.
emta factory agent entering Basic/Hybrid flow provisioning mode.
Resuming trap thread
Stopping DHCP/ToD/TFTP (client requested)...
[01:20:46 01/01/1970] [CmDocsisIpThread] BcmEcosIpHalIf::RemoveIpv6Address: (IP
Stack1 HalIf) ERROR - Failed to remove IPv6 address fe80::fe4a:e9ff:fede:ad88/64
from the stack!
[01:20:46 01/01/1970] [CmDocsisIpThread] BcmDhcpV6ClientIf::ReleaseAddresses:
(DHCPv6 ClientIf for IP Stack1) ERROR - IA state is initial; there is no address to
release.
BcmDocsis3DsMacEnableMulticastDsidForwarding 0; primary DS = 0
SCQAM DSID filter control = 0x00
OFDM DSID filter control = 0x01
Deleting DOCSIS 1.0 CoS Settings for SID 0xc9
[01:20:46 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows:
(DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along
with associated Classifiers and PHS rules...
[01:20:46 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState:
(CmDocsisCtlThread)
[01:20:46 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Primary SID for usHwChannel 0 to 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 1
Updating US chan 8 data Profile test msg for Sid: 0x0.
Updating US chan 9 data Profile test msg for Sid: 0x0.
CM/DocsisCtl> [01:20:47 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL declared PULSE lost!
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=false
[01:20:47 01/01/1970] [CmDocsisCtlThread] BcmCmMultiDsHelper::PreRegDsChanChange:
target freq hz = 0
reason string = ErrorRecovery
CmInitReason = 16

Starting DS scanning...
[01:20:47 01/01/1970] [CmDocsisCtlThread] BcmCmDownstreamScan::StartScan: Starting
DS scan
Checking for cable cut...

CM/DocsisCtl> Plant power is 15.45

Cable connected

Scanning 692.000 MHz SC-QAM (Annex A(Eu.1M))


CM/DocsisCtl> Scanning 693.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 694.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 695.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 696.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 697.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 698.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 699.000 MHz SC-QAM (Annex A(Eu.1M)) locked SC-QAM
[01:20:51 01/01/1970] [CmDocsisCtlThread] BcmCmDsChan::DsLockOk: (BcmCmDsChan 0)
hwRxId=0 freq=0 dcid=0

******************************************
DOWNSTREAM STATUS
******************************************
HW Channel ID = 0
Phy type: SC-QAM
DS active chan settings:
ds chan id = 0
center freq, Hz = 699000000 Hz
primary capable = false
status event rpt bitmask = 0

CM HW Detected DS Phy Settings:


Center Freq, Hz = 699000000
QAM = Locked
FEC = Locked
Carrier Freq Offset, kHz = 0
Channel Width, Hz = 8000000
Modulation = Qam256
Interleaver = Taps12Incr17
Symbol Rate, sym/sec = 6952000

******************************************

[01:20:51 01/01/1970] [CmDocsisCtlThread]


BcmCmMacDomainSetsState::StartDsMacMddInit:
**********************************************
Waiting for MDDs...
**********************************************

BcmCmDocsisCtlMsgACT::HandleEvent() @time=4851760 event_code=4 (kCmPriDsMddSetsOk)


MDD diplexer band edge not specified.
MDD Plant US Frequency Range = extended.
Requested Spectrum = US:(0 MHz..85 MHz) DS:(0 MHz..0 MHz)
Best Match = 0: US:(5 MHz..85 MHz) DS:(108 MHz..1218 MHz)
Switchable diplexer ECN support disabled. NOT switching diplexer.
[01:20:51 01/01/1970] [CmDocsisCtlThread]
BcmCmMdDsSgDiscState::TrimSgSetWithoutThisDcid:
1 candidate MD-DS-SG remain after TrimSgSetWithoutThisDcid( target_dcid )
for target_dcid=0x16 (22)
[01:20:51 01/01/1970] [CmDocsisCtlThread] BcmCmMdDsSgDiscState::StartMdDsSgDisc:
special case: one and only one MD-DS-SG contains mdd_dcid.
fMdDsSgId=0x1d (29)
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , M-d++a+i-+Ty-eA+dA++e|:
i_L-ca+A++e|A: 1
Chec+ +D_A++e|A
Cha++e+ Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1
MD-DS-SG discovery info:

fCmMdDsSgDiscState = 6 (kMdDsSgDiscDone)
fMdDsSgId = 0x1d (29)
fMdDsSgDiscovered = true

Trimmed Candidate Downstream Service Group Settings List: list size = 1

sgid size member dcid's


---- ---- -------------
29 34 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
27 28 29 30 31 32 159 160

Downstream Active Channel Settings List:

dcid type frequency prim capable rpt enable mod/annex or PLC params
---- -------- --------- ------------ ---------- -----------------------
1 SC-QAM 531000000 y 0x36 256QAM/AnnexA
2 SC-QAM 539000000 y 0x36 256QAM/AnnexA
3 SC-QAM 547000000 y 0x36 256QAM/AnnexA
4 SC-QAM 555000000 y 0x36 256QAM/AnnexA
5 SC-QAM 563000000 y 0x36 256QAM/AnnexA
6 SC-QAM 571000000 y 0x36 256QAM/AnnexA
7 SC-QAM 579000000 y 0x36 256QAM/AnnexA
8 SC-QAM 587000000 y 0x36 256QAM/AnnexA
9 SC-QAM 595000000 y 0x36 256QAM/AnnexA
10 SC-QAM 603000000 y 0x36 256QAM/AnnexA
11 SC-QAM 611000000 y 0x36 256QAM/AnnexA
12 SC-QAM 619000000 y 0x36 256QAM/AnnexA
13 SC-QAM 627000000 y 0x36 256QAM/AnnexA
14 SC-QAM 635000000 y 0x36 256QAM/AnnexA
15 SC-QAM 643000000 y 0x36 256QAM/AnnexA
16 SC-QAM 651000000 y 0x36 256QAM/AnnexA
17 SC-QAM 659000000 y 0x36 256QAM/AnnexA
18 SC-QAM 667000000 y 0x36 256QAM/AnnexA
19 SC-QAM 675000000 y 0x36 256QAM/AnnexA
20 SC-QAM 683000000 y 0x36 256QAM/AnnexA
21 SC-QAM 691000000 y 0x36 256QAM/AnnexA
22 SC-QAM 699000000 y 0x36 256QAM/AnnexA
23 SC-QAM 707000000 y 0x36 256QAM/AnnexA
24 SC-QAM 715000000 y 0x36 256QAM/AnnexA
25 SC-QAM 723000000 y 0x36 256QAM/AnnexA
26 SC-QAM 731000000 y 0x36 256QAM/AnnexA
27 SC-QAM 739000000 y 0x36 256QAM/AnnexA
28 SC-QAM 747000000 y 0x36 256QAM/AnnexA
29 SC-QAM 755000000 y 0x36 256QAM/AnnexA
30 SC-QAM 763000000 y 0x36 256QAM/AnnexA
31 SC-QAM 771000000 y 0x36 256QAM/AnnexA
32 SC-QAM 779000000 y 0x36 256QAM/AnnexA
159 OFDM PLC 897000000 n 0x36 25Khz/5us/0.625us
160 OFDM PLC 361000000 n 0x36 50Khz/0.9375us/0.625us

Trimmed Downstream Ambiguity Resolution Frequency List: list size = 3

531000000-sc_qam 539000000-sc_qam 547000000-sc_qam


visible dcid set = 22

freq with visible dcid set = 699000000

BcmCmDocsisCtlMsgACT::HandleEvent() @time=4852350 event_code=11


(kCmMdDsSgDiscDone)
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=true
[01:20:52 01/01/1970] [CmDocsisCtlThread]
BcmDocsisCmHalIf::SetPrimaryDownstreamChannel: (DOCSIS CableModem HalIf)
Installing primary downstream channel index: 0
SetRatios called with primary downstream channel number = 0
AnnexMode[0] = 1 QAM_Mode[0] = 256
Num/Den = 869/1280
3390 SCDMA/OFDM mode - ChannelNumber = 0 Numerator = 869 Denominator = 1280
CM/DocsisCtl> [01:20:52 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL failed to acquire sync or lost sync!
... TCOFDM - DTR is now locked.... (T2=150ms Sync=14)

Given a 216 MHz TCOFDM clock, the nominal value for the DTR FCW is 0xC22E45067
The DTR FCW is 0xc22e9656 - that value is good (6, within 100 ppm)
Kicked off the DPLL
LE Done bit was set
LE Done bit was set
SCQAM DS clock source.
PLL in Leaky mode.
PLL Fn = 6, k1 = 18, k2 = 19
[01:20:52 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context=1 (ErrorRecovery)
[01:20:52 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context is error recovery or startup.
Always use last good upstream target chan id=1
[01:20:52 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper) Locked on the downstream. Waiting for UCDs...
[01:20:52 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefFail: (Cm
Multi US Helper) target hwTxId=0
CM/DocsisCtl> [01:20:54 01/01/1970] [CmDocsisCtlThread]
BcmCmMultiUsHelper::TmUcdRxTimerEvent: (Cm Multi US Helper)
ucd gathering ok.

[01:20:54 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper) state at
entry:

Channel targeting:
Downstream:
fTargetDsFreqHz = 0 (0)
fCurrentDsFreqHz = 0x29a9e4c0 (699000000)
fStoredDsFreqHz = 0x29020c00 (688000000)

Upstream:
fDestSingleTxTargetUsChanId = 0x1 (1)
fTargetingContext = 1 (ErrorRecovery)
Startup UCD Selection Info:

low priority candidate ucid list = 2 1 3 4 5 7 8 6


happy home ucid set = 1 2 3 4

Upstream Active Channel Settings:

ucid rpt enable sel prio MAP source dcid's


---- ---------- -------- -----------------
1 0x1c0 0
2 0x1c0 0
3 0x1c0 0
4 0x1c0 0
5 0x1c0 0
6 0x1c0 0
7 0x1c0 0
8 0x1c0 0

BcmCmUsTargetMset (a.k.a. usable UCDs gathered during startup):

us config
phy change ranging scdma
type ucid dcid count tried? enabled?
---- ---- ---- ------ ------- --------
3 1 22 4 n n
3 2 22 4 n n
3 3 22 4 n n
3 4 22 4 n n
3 5 22 4 n n
3 6 22 4 n n
3 7 22 4 n n
3 8 22 4 n n

[01:20:54 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper)
starting docs3 upstream initialization on target ucid=2
with upstream phy type 3 on hardware transmitter index 0

[01:20:54 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::ExecuteTccCmd: hwTxId=0


docs ucid=0
[01:20:54 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0
[01:20:54 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::InstallUsSets: Installing
UCD w/ucid for UCID=2 for CM hardware tx chan 0

[01:20:54 01/01/1970] [CmDocsisCtlThread]


BcmCmUsSetsState::TestAndLaunchUsTimeSync: starting upstream time sync
acquisition...
[01:20:54 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefOk: (Cm
Multi US Helper) target hwTxId=0
[01:20:54 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::UsTimeRefOk: upstream time
sync acquired for fHwTxId=0

== Beginning initial ranging for Docsis UCID 2 ==


Minimum transmit power is 17 dBmV
Maximum transmit power is 53 dBmV
Stored power level for UCID 2 is 38 dBmV
Using per transmitter stored initial upstream power = 38 dBmV hwTxId = 0 docsis
UCID = 2
RNG-RSP UsChanId=2 Adj: tim=1945 freq=24 Stat=Continue (CmdPwr (UsChanId-dBmV):
(2-40.50) )
[01:20:55 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0xc9
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (2-
41.00) )
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (2-
41.00) )
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (2-
41.00) )
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (2-
41.00) )
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Success (CmdPwr (UsChanId-dBmV): (2-
41.00) )
[01:21:00 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::FirstRngSuccess:
(CmDocsisCtlThread)
first RNG-RSP w/status==SUCCESS for hwTxId=0 and DOCSIS ucid=2
[01:21:00 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::LaunchEaeBpkm:
(CmDocsisCtlThread) BPKM enabled. starting Early Authentication and Encryption BPKM
key requests. Primary Sid = 201
CM/DocsisCtl> Bandwidth request failure! Status = 0

BcmCmUsChanTimerMuxACT::HandleEvent() @time=5050120 fTimerType=5


(kT4NoStationMaint) hwTxId=0 docs ucid=2
[01:24:10 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::T4NoStationMaintEvent: ERROR - no Station Maint map op error.
hwTxId=0 docs ucid=2
[01:24:10 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::CommonRngErrorHandler: reason=10 (T4NoStationMaintTimeout)
hwTxId=0 docs ucid=2
[01:24:10 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) Purging DS
frequency 699000000 from current scan pass due to pre-registration restart error
[01:24:10 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) reinit MAC #24:
T4NoStationMaintTimeout

[01:24:10 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::Reset:


(CmDocsisCtlThread) DefaultSnmpAgentClass::RestartPendingEvent for Vendor CM
Agent w/ BRCM Factory Support
Logging event: Received Response to Broadcast Maintenance Request, But no Unicast
Maintenance opportunities received - T4 time out;CM-MAC=fc:4a:e9:de:ad:88;CMTS-
MAC=28:52:61:fa:d8:78;CM-QOS=1.1;CM-VER=3.1;
Vendor CM Agent w/ BRCM Factory Support updating ifTableLastChange.
Vendor CM Agent w/ BRCM Factory Support resetting to default state.
Vendor CM Agent w/ BRCM Factory Support destroying users...
Vendor CM Agent w/ BRCM Factory Support destroying notifies...
Vendor CM Agent w/ BRCM Factory Support destroying views...
Allowing DOCS-CABLE-DEVICE-MIB IP filters.
Vendor CM Agent w/ BRCM Factory Support deferring traps.
CM/DocsisCtl> Received RG Event 0x80000001 State 0x1
eRouter Linux WAN Down
[01:24:10 01/01/1970] [eRouterMsgPipe] eRouterMsgPipe::UpdateIpNetToMediaEntry:
(eRouterMsgPipe) eRouter IP address:0.0.0.0
01:24:10.410 01/01/1970 (CALC) mtaCmStatusInfo() - MTA is Signaled: *NOT-
OPERATIONAL* (Stat=0x1) emtaCurState = 0.
EmtaSnmpAgent::SoftReset
Pausing trap thread
emta factory agentResetting to default state.
emta factory agent destroying users...
emta factory agent destroying notifies...
emta factory agent destroying views...
emta factory agent entering RFC-2576 Coexistence security mode.
emta factory agent entering Basic/Hybrid flow provisioning mode.
Resuming trap thread
Stopping DHCP/ToD/TFTP (client requested)...
[01:24:10 01/01/1970] [CmDocsisIpThread] BcmEcosIpHalIf::RemoveIpv6Address: (IP
Stack1 HalIf) ERROR - Failed to remove IPv6 address fe80::fe4a:e9ff:fede:ad88/64
from the stack!
[01:24:10 01/01/1970] [CmDocsisIpThread] BcmDhcpV6ClientIf::ReleaseAddresses:
(DHCPv6 ClientIf for IP Stack1) ERROR - IA state is initial; there is no address to
release.
BcmDocsis3DsMacEnableMulticastDsidForwarding 0; primary DS = 0
SCQAM DSID filter control = 0x00
OFDM DSID filter control = 0x01
CM/DocsisCtl> Deleting DOCSIS 1.0 CoS Settings for SID 0xc9
[01:24:10 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows:
(DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along
with associated Classifiers and PHS rules...
[01:24:10 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState:
(CmDocsisCtlThread)
[01:24:10 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Primary SID for usHwChannel 0 to 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 1
Updating US chan 8 data Profile test msg for Sid: 0x0.
Updating US chan 9 data Profile test msg for Sid: 0x0.
CM/DocsisCtl> [01:24:11 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL declared PULSE lost!
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=false
[01:24:11 01/01/1970] [CmDocsisCtlThread] BcmCmMultiDsHelper::PreRegDsChanChange:
target freq hz = 0
reason string = ErrorRecovery
CmInitReason = 16

Starting DS scanning...
[01:24:11 01/01/1970] [CmDocsisCtlThread] BcmCmDownstreamScan::StartScan: Starting
DS scan
Checking for cable cut...

CM/DocsisCtl> Plant power is 15.55

Cable connected

CM/DocsisCtl> Scanning 700.000 MHz SC-QAM (Annex A(Eu.1M))


Scanning 701.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 702.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 703.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 704.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 705.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 706.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 707.000 MHz SC-QAM (Annex A(Eu.1M)) locked SC-QAM
[01:24:14 01/01/1970] [CmDocsisCtlThread] BcmCmDsChan::DsLockOk: (BcmCmDsChan 0)
hwRxId=0 freq=0 dcid=0
******************************************
DOWNSTREAM STATUS
******************************************
HW Channel ID = 0
Phy type: SC-QAM
DS active chan settings:
ds chan id = 0
center freq, Hz = 707000000 Hz
primary capable = false
status event rpt bitmask = 0

CM HW Detected DS Phy Settings:


Center Freq, Hz = 707000000
QAM = Locked
FEC = Locked
Carrier Freq Offset, kHz = 0
Channel Width, Hz = 8000000
Modulation = Qam256
Interleaver = Taps12Incr17
Symbol Rate, sym/sec = 6952000

******************************************

[01:24:14 01/01/1970] [CmDocsisCtlThread]


BcmCmMacDomainSetsState::StartDsMacMddInit:
**********************************************
Waiting for MDDs...
**********************************************

CM/DocsisCtl>
BcmCmDocsisCtlMsgACT::HandleEvent() @time=5055760 event_code=4 (kCmPriDsMddSetsOk)

MDD diplexer band edge not specified.


MDD Plant US Frequency Range = extended.
Requested Spectrum = US:(0 MHz..85 MHz) DS:(0 MHz..0 MHz)
Best Match = 0: US:(5 MHz..85 MHz) DS:(108 MHz..1218 MHz)
Switchable diplexer ECN support disabled. NOT switching diplexer.
[01:24:15 01/01/1970] [CmDocsisCtlThread]
BcmCmMdDsSgDiscState::TrimSgSetWithoutThisDcid:
1 candidate MD-DS-SG remain after TrimSgSetWithoutThisDcid( target_dcid )
for target_dcid=0x17 (23)
[01:24:15 01/01/1970] [CmDocsisCtlThread] BcmCmMdDsSgDiscState::StartMdDsSgDisc:
special case: one and only one MD-DS-SG contains mdd_dcid.
fMdDsSgId=0x1d (29)
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , M-d++a+i-+Ty-eA+dA++e|:
i_L-ca+A++e|A: 1
Chec+ +D_A++e|A
Cha++e+ Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1

MD-DS-SG discovery info:

fCmMdDsSgDiscState = 6 (kMdDsSgDiscDone)
fMdDsSgId = 0x1d (29)
fMdDsSgDiscovered = true

Trimmed Candidate Downstream Service Group Settings List: list size = 1

sgid size member dcid's


---- ---- -------------
29 34 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
27 28 29 30 31 32 159 160

Downstream Active Channel Settings List:

dcid type frequency prim capable rpt enable mod/annex or PLC params
---- -------- --------- ------------ ---------- -----------------------
1 SC-QAM 531000000 y 0x36 256QAM/AnnexA
2 SC-QAM 539000000 y 0x36 256QAM/AnnexA
3 SC-QAM 547000000 y 0x36 256QAM/AnnexA
4 SC-QAM 555000000 y 0x36 256QAM/AnnexA
5 SC-QAM 563000000 y 0x36 256QAM/AnnexA
6 SC-QAM 571000000 y 0x36 256QAM/AnnexA
7 SC-QAM 579000000 y 0x36 256QAM/AnnexA
8 SC-QAM 587000000 y 0x36 256QAM/AnnexA
9 SC-QAM 595000000 y 0x36 256QAM/AnnexA
10 SC-QAM 603000000 y 0x36 256QAM/AnnexA
11 SC-QAM 611000000 y 0x36 256QAM/AnnexA
12 SC-QAM 619000000 y 0x36 256QAM/AnnexA
13 SC-QAM 627000000 y 0x36 256QAM/AnnexA
14 SC-QAM 635000000 y 0x36 256QAM/AnnexA
15 SC-QAM 643000000 y 0x36 256QAM/AnnexA
16 SC-QAM 651000000 y 0x36 256QAM/AnnexA
17 SC-QAM 659000000 y 0x36 256QAM/AnnexA
18 SC-QAM 667000000 y 0x36 256QAM/AnnexA
19 SC-QAM 675000000 y 0x36 256QAM/AnnexA
20 SC-QAM 683000000 y 0x36 256QAM/AnnexA
21 SC-QAM 691000000 y 0x36 256QAM/AnnexA
22 SC-QAM 699000000 y 0x36 256QAM/AnnexA
23 SC-QAM 707000000 y 0x36 256QAM/AnnexA
24 SC-QAM 715000000 y 0x36 256QAM/AnnexA
25 SC-QAM 723000000 y 0x36 256QAM/AnnexA
26 SC-QAM 731000000 y 0x36 256QAM/AnnexA
27 SC-QAM 739000000 y 0x36 256QAM/AnnexA
28 SC-QAM 747000000 y 0x36 256QAM/AnnexA
29 SC-QAM 755000000 y 0x36 256QAM/AnnexA
30 SC-QAM 763000000 y 0x36 256QAM/AnnexA
31 SC-QAM 771000000 y 0x36 256QAM/AnnexA
32 SC-QAM 779000000 y 0x36 256QAM/AnnexA
159 OFDM PLC 897000000 n 0x36 25Khz/5us/0.625us
160 OFDM PLC 361000000 n 0x36 50Khz/0.9375us/0.625us

Trimmed Downstream Ambiguity Resolution Frequency List: list size = 3

531000000-sc_qam 539000000-sc_qam 547000000-sc_qam

visible dcid set = 23

freq with visible dcid set = 707000000

BcmCmDocsisCtlMsgACT::HandleEvent() @time=5056350 event_code=11


(kCmMdDsSgDiscDone)
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=true
[01:24:16 01/01/1970] [CmDocsisCtlThread]
BcmDocsisCmHalIf::SetPrimaryDownstreamChannel: (DOCSIS CableModem HalIf)
Installing primary downstream channel index: 0
SetRatios called with primary downstream channel number = 0
AnnexMode[0] = 1 QAM_Mode[0] = 256
Num/Den = 869/1280
3390 SCDMA/OFDM mode - ChannelNumber = 0 Numerator = 869 Denominator = 1280
CM/DocsisCtl> [01:24:16 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL failed to acquire sync or lost sync!
... TCOFDM - DTR is now locked.... (T2=150ms Sync=14)

Given a 216 MHz TCOFDM clock, the nominal value for the DTR FCW is 0xC22E45067
The DTR FCW is 0xc22eb01e - that value is good (8, within 100 ppm)
Kicked off the DPLL
LE Done bit was set
LE Done bit was set
SCQAM DS clock source.
PLL in Leaky mode.
PLL Fn = 6, k1 = 18, k2 = 19
[01:24:16 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context=1 (ErrorRecovery)
[01:24:16 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context is error recovery or startup.
Always use last good upstream target chan id=1
[01:24:16 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper) Locked on the downstream. Waiting for UCDs...
[01:24:16 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefFail: (Cm
Multi US Helper) target hwTxId=0
CM/DocsisCtl> [01:24:18 01/01/1970] [CmDocsisCtlThread]
BcmCmMultiUsHelper::TmUcdRxTimerEvent: (Cm Multi US Helper)
ucd gathering ok.

[01:24:18 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper) state at
entry:

Channel targeting:
Downstream:
fTargetDsFreqHz = 0 (0)
fCurrentDsFreqHz = 0x2a23f6c0 (707000000)
fStoredDsFreqHz = 0x29020c00 (688000000)

Upstream:
fDestSingleTxTargetUsChanId = 0x1 (1)
fTargetingContext = 1 (ErrorRecovery)

Startup UCD Selection Info:

low priority candidate ucid list = 3 1 2 4 8 7 5 6


happy home ucid set = 1 2 3 4

Upstream Active Channel Settings:

ucid rpt enable sel prio MAP source dcid's


---- ---------- -------- -----------------
1 0x1c0 0
2 0x1c0 0
3 0x1c0 0
4 0x1c0 0
5 0x1c0 0
6 0x1c0 0
7 0x1c0 0
8 0x1c0 0

BcmCmUsTargetMset (a.k.a. usable UCDs gathered during startup):

us config
phy change ranging scdma
type ucid dcid count tried? enabled?
---- ---- ---- ------ ------- --------
3 1 23 4 n n
3 2 23 4 n n
3 3 23 4 n n
3 4 23 4 n n
3 5 23 4 n n
3 6 23 4 n n
3 7 23 4 n n
3 8 23 4 n n

[01:24:18 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper)
starting docs3 upstream initialization on target ucid=3
with upstream phy type 3 on hardware transmitter index 0

[01:24:18 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::ExecuteTccCmd: hwTxId=0


docs ucid=0
[01:24:18 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0
[01:24:18 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::InstallUsSets: Installing
UCD w/ucid for UCID=3 for CM hardware tx chan 0

[01:24:18 01/01/1970] [CmDocsisCtlThread]


BcmCmUsSetsState::TestAndLaunchUsTimeSync: starting upstream time sync
acquisition...
[01:24:18 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefOk: (Cm
Multi US Helper) target hwTxId=0
[01:24:18 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::UsTimeRefOk: upstream time
sync acquired for fHwTxId=0

== Beginning initial ranging for Docsis UCID 3 ==


Minimum transmit power is 17 dBmV
Maximum transmit power is 53 dBmV
Stored power level for UCID 3 is 38 dBmV
Using per transmitter stored initial upstream power = 38 dBmV hwTxId = 0 docsis
UCID = 3
RNG-RSP UsChanId=3 Adj: tim=1934 freq=-9 Stat=Continue (CmdPwr (UsChanId-dBmV):
(3-41.25) )
[01:24:19 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0xc9
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (3-
41.25) )
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (3-
41.25) )
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (3-
41.25) )
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (3-
41.25) )
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Success (CmdPwr (UsChanId-dBmV): (3-
41.25) )
[01:24:24 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::FirstRngSuccess:
(CmDocsisCtlThread)
first RNG-RSP w/status==SUCCESS for hwTxId=0 and DOCSIS ucid=3
[01:24:24 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::LaunchEaeBpkm:
(CmDocsisCtlThread) BPKM enabled. starting Early Authentication and Encryption BPKM
key requests. Primary Sid = 201
CM/DocsisCtl> Bandwidth request failure! Status = 0

BcmCmUsChanTimerMuxACT::HandleEvent() @time=5254400 fTimerType=5


(kT4NoStationMaint) hwTxId=0 docs ucid=3
[01:27:34 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::T4NoStationMaintEvent: ERROR - no Station Maint map op error.
hwTxId=0 docs ucid=3
[01:27:34 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::CommonRngErrorHandler: reason=10 (T4NoStationMaintTimeout)
hwTxId=0 docs ucid=3
[01:27:34 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) Purging DS
frequency 707000000 from current scan pass due to pre-registration restart error
[01:27:34 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) reinit MAC #25:
T4NoStationMaintTimeout

[01:27:34 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::Reset:


(CmDocsisCtlThread) DefaultSnmpAgentClass::RestartPendingEvent for Vendor CM
Agent w/ BRCM Factory Support
Logging event: Received Response to Broadcast Maintenance Request, But no Unicast
Maintenance opportunities received - T4 time out;CM-MAC=fc:4a:e9:de:ad:88;CMTS-
MAC=28:52:61:fa:d8:78;CM-QOS=1.1;CM-VER=3.1;
Vendor CM Agent w/ BRCM Factory Support updating ifTableLastChange.
Vendor CM Agent w/ BRCM Factory Support resetting to default state.
Vendor CM Agent w/ BRCM Factory Support destroying users...
Vendor CM Agent w/ BRCM Factory Support destroying notifies...
Vendor CM Agent w/ BRCM Factory Support destroying views...
Allowing DOCS-CABLE-DEVICE-MIB IP filters.
Vendor CM Agent w/ BRCM Factory Support deferring traps.
Received RG Event 0x80000001 State 0x1
eRouter Linux WAN Down
[01:27:34 01/01/1970] [eRouterMsgPipe] eRouterMsgPipe::UpdateIpNetToMediaEntry:
(eRouterMsgPipe) eRouter IP address:0.0.0.0
01:27:34.690 01/01/1970 (CALC) mtaCmStatusInfo() - MTA is Signaled: *NOT-
OPERATIONAL* (Stat=0x1) emtaCurState = 0.
EmtaSnmpAgent::SoftReset
Pausing trap thread
emta factory agentResetting to default state.
emta factory agent destroying users...
emta factory agent destroying notifies...
emta factory agent destroying views...
emta factory agent entering RFC-2576 Coexistence security mode.
emta factory agent entering Basic/Hybrid flow provisioning mode.
Resuming trap thread
Stopping DHCP/ToD/TFTP (client requested)...
[01:27:34 01/01/1970] [CmDocsisIpThread] BcmEcosIpHalIf::RemoveIpv6Address: (IP
Stack1 HalIf) ERROR - Failed to remove IPv6 address fe80::fe4a:e9ff:fede:ad88/64
from the stack!
[01:27:34 01/01/1970] [CmDocsisIpThread] BcmDhcpV6ClientIf::ReleaseAddresses:
(DHCPv6 ClientIf for IP Stack1) ERROR - IA state is initial; there is no address to
release.
BcmDocsis3DsMacEnableMulticastDsidForwarding 0; primary DS = 0
SCQAM DSID filter control = 0x00
OFDM DSID filter control = 0x01
Deleting DOCSIS 1.0 CoS Settings for SID 0xc9
[01:27:35 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows:
(DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along
with associated Classifiers and PHS rules...
[01:27:35 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState:
(CmDocsisCtlThread)
[01:27:35 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Primary SID for usHwChannel 0 to 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 1
Updating US chan 8 data Profile test msg for Sid: 0x0.
Updating US chan 9 data Profile test msg for Sid: 0x0.
CM/DocsisCtl> [01:27:35 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL declared PULSE lost!
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=false
[01:27:35 01/01/1970] [CmDocsisCtlThread] BcmCmMultiDsHelper::PreRegDsChanChange:
target freq hz = 0
reason string = ErrorRecovery
CmInitReason = 16

Starting DS scanning...
[01:27:35 01/01/1970] [CmDocsisCtlThread] BcmCmDownstreamScan::StartScan: Starting
DS scan
Checking for cable cut...

CM/DocsisCtl> Plant power is 15.55

Cable connected

CM/DocsisCtl> Scanning 708.000 MHz SC-QAM (Annex A(Eu.1M))


Scanning 709.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 710.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 711.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 712.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 713.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 714.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 715.000 MHz SC-QAM (Annex A(Eu.1M)) locked SC-QAM
[01:27:38 01/01/1970] [CmDocsisCtlThread] BcmCmDsChan::DsLockOk: (BcmCmDsChan 0)
hwRxId=0 freq=0 dcid=0

******************************************
DOWNSTREAM STATUS
******************************************
HW Channel ID = 0
Phy type: SC-QAM
DS active chan settings:
ds chan id = 0
center freq, Hz = 715000000 Hz
primary capable = false
status event rpt bitmask = 0

CM HW Detected DS Phy Settings:


Center Freq, Hz = 715000000
QAM = Locked
FEC = Locked
Carrier Freq Offset, kHz = 0
Channel Width, Hz = 8000000
Modulation = Qam256
Interleaver = Taps12Incr17
Symbol Rate, sym/sec = 6952000

******************************************

[01:27:38 01/01/1970] [CmDocsisCtlThread]


BcmCmMacDomainSetsState::StartDsMacMddInit:
**********************************************
Waiting for MDDs...
**********************************************

CM/DocsisCtl>
BcmCmDocsisCtlMsgACT::HandleEvent() @time=5259760 event_code=4 (kCmPriDsMddSetsOk)

MDD diplexer band edge not specified.


MDD Plant US Frequency Range = extended.
Requested Spectrum = US:(0 MHz..85 MHz) DS:(0 MHz..0 MHz)
Best Match = 0: US:(5 MHz..85 MHz) DS:(108 MHz..1218 MHz)
Switchable diplexer ECN support disabled. NOT switching diplexer.
[01:27:39 01/01/1970] [CmDocsisCtlThread]
BcmCmMdDsSgDiscState::TrimSgSetWithoutThisDcid:
1 candidate MD-DS-SG remain after TrimSgSetWithoutThisDcid( target_dcid )
for target_dcid=0x18 (24)
[01:27:39 01/01/1970] [CmDocsisCtlThread] BcmCmMdDsSgDiscState::StartMdDsSgDisc:
special case: one and only one MD-DS-SG contains mdd_dcid.
fMdDsSgId=0x1d (29)
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , M-d++a+i-+Ty-eA+dA++e|:
i_L-ca+A++e|A: 1
Chec+ +D_A++e|A
Cha++e+ Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1

MD-DS-SG discovery info:

fCmMdDsSgDiscState = 6 (kMdDsSgDiscDone)
fMdDsSgId = 0x1d (29)
fMdDsSgDiscovered = true

Trimmed Candidate Downstream Service Group Settings List: list size = 1

sgid size member dcid's


---- ---- -------------
29 34 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
27 28 29 30 31 32 159 160

Downstream Active Channel Settings List:

dcid type frequency prim capable rpt enable mod/annex or PLC params
---- -------- --------- ------------ ---------- -----------------------
1 SC-QAM 531000000 y 0x36 256QAM/AnnexA
2 SC-QAM 539000000 y 0x36 256QAM/AnnexA
3 SC-QAM 547000000 y 0x36 256QAM/AnnexA
4 SC-QAM 555000000 y 0x36 256QAM/AnnexA
5 SC-QAM 563000000 y 0x36 256QAM/AnnexA
6 SC-QAM 571000000 y 0x36 256QAM/AnnexA
7 SC-QAM 579000000 y 0x36 256QAM/AnnexA
8 SC-QAM 587000000 y 0x36 256QAM/AnnexA
9 SC-QAM 595000000 y 0x36 256QAM/AnnexA
10 SC-QAM 603000000 y 0x36 256QAM/AnnexA
11 SC-QAM 611000000 y 0x36 256QAM/AnnexA
12 SC-QAM 619000000 y 0x36 256QAM/AnnexA
13 SC-QAM 627000000 y 0x36 256QAM/AnnexA
14 SC-QAM 635000000 y 0x36 256QAM/AnnexA
15 SC-QAM 643000000 y 0x36 256QAM/AnnexA
16 SC-QAM 651000000 y 0x36 256QAM/AnnexA
17 SC-QAM 659000000 y 0x36 256QAM/AnnexA
18 SC-QAM 667000000 y 0x36 256QAM/AnnexA
19 SC-QAM 675000000 y 0x36 256QAM/AnnexA
20 SC-QAM 683000000 y 0x36 256QAM/AnnexA
21 SC-QAM 691000000 y 0x36 256QAM/AnnexA
22 SC-QAM 699000000 y 0x36 256QAM/AnnexA
23 SC-QAM 707000000 y 0x36 256QAM/AnnexA
24 SC-QAM 715000000 y 0x36 256QAM/AnnexA
25 SC-QAM 723000000 y 0x36 256QAM/AnnexA
26 SC-QAM 731000000 y 0x36 256QAM/AnnexA
27 SC-QAM 739000000 y 0x36 256QAM/AnnexA
28 SC-QAM 747000000 y 0x36 256QAM/AnnexA
29 SC-QAM 755000000 y 0x36 256QAM/AnnexA
30 SC-QAM 763000000 y 0x36 256QAM/AnnexA
31 SC-QAM 771000000 y 0x36 256QAM/AnnexA
32 SC-QAM 779000000 y 0x36 256QAM/AnnexA
159 OFDM PLC 897000000 n 0x36 25Khz/5us/0.625us
160 OFDM PLC 361000000 n 0x36 50Khz/0.9375us/0.625us

Trimmed Downstream Ambiguity Resolution Frequency List: list size = 3

531000000-sc_qam 539000000-sc_qam 547000000-sc_qam

visible dcid set = 24

freq with visible dcid set = 715000000

BcmCmDocsisCtlMsgACT::HandleEvent() @time=5260350 event_code=11


(kCmMdDsSgDiscDone)
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=true
[01:27:40 01/01/1970] [CmDocsisCtlThread]
BcmDocsisCmHalIf::SetPrimaryDownstreamChannel: (DOCSIS CableModem HalIf)
Installing primary downstream channel index: 0
SetRatios called with primary downstream channel number = 0
AnnexMode[0] = 1 QAM_Mode[0] = 256
Num/Den = 869/1280
3390 SCDMA/OFDM mode - ChannelNumber = 0 Numerator = 869 Denominator = 1280
CM/DocsisCtl> [01:27:40 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL failed to acquire sync or lost sync!
... TCOFDM - DTR is now locked.... (T2=150ms Sync=14)

Given a 216 MHz TCOFDM clock, the nominal value for the DTR FCW is 0xC22E45067
The DTR FCW is 0xc22e8fb6 - that value is good (5, within 100 ppm)
Kicked off the DPLL
LE Done bit was set
LE Done bit was set
SCQAM DS clock source.
PLL in Leaky mode.
PLL Fn = 6, k1 = 18, k2 = 19
[01:27:40 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context=1 (ErrorRecovery)
[01:27:40 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context is error recovery or startup.
Always use last good upstream target chan id=1
[01:27:40 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper) Locked on the downstream. Waiting for UCDs...
[01:27:40 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefFail: (Cm
Multi US Helper) target hwTxId=0
CM/DocsisCtl> [01:27:42 01/01/1970] [CmDocsisCtlThread]
BcmCmMultiUsHelper::TmUcdRxTimerEvent: (Cm Multi US Helper)
ucd gathering ok.

[01:27:42 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper) state at
entry:

Channel targeting:
Downstream:
fTargetDsFreqHz = 0 (0)
fCurrentDsFreqHz = 0x2a9e08c0 (715000000)
fStoredDsFreqHz = 0x29020c00 (688000000)

Upstream:
fDestSingleTxTargetUsChanId = 0x1 (1)
fTargetingContext = 1 (ErrorRecovery)

Startup UCD Selection Info:

low priority candidate ucid list = 3 4 1 2 6 5 8 7


happy home ucid set = 1 2 3 4

Upstream Active Channel Settings:

ucid rpt enable sel prio MAP source dcid's


---- ---------- -------- -----------------
1 0x1c0 0
2 0x1c0 0
3 0x1c0 0
4 0x1c0 0
5 0x1c0 0
6 0x1c0 0
7 0x1c0 0
8 0x1c0 0

BcmCmUsTargetMset (a.k.a. usable UCDs gathered during startup):

us config
phy change ranging scdma
type ucid dcid count tried? enabled?
---- ---- ---- ------ ------- --------
3 1 24 4 n n
3 2 24 4 n n
3 3 24 4 n n
3 4 24 4 n n
3 5 24 4 n n
3 6 24 4 n n
3 7 24 4 n n
3 8 24 4 n n

[01:27:42 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper)
starting docs3 upstream initialization on target ucid=3
with upstream phy type 3 on hardware transmitter index 0

[01:27:42 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::ExecuteTccCmd: hwTxId=0


docs ucid=0
[01:27:42 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0
[01:27:42 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::InstallUsSets: Installing
UCD w/ucid for UCID=3 for CM hardware tx chan 0

[01:27:42 01/01/1970] [CmDocsisCtlThread]


BcmCmUsSetsState::TestAndLaunchUsTimeSync: starting upstream time sync
acquisition...
[01:27:42 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefOk: (Cm
Multi US Helper) target hwTxId=0
[01:27:42 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::UsTimeRefOk: upstream time
sync acquired for fHwTxId=0

== Beginning initial ranging for Docsis UCID 3 ==


Minimum transmit power is 17 dBmV
Maximum transmit power is 53 dBmV
Stored power level for UCID 3 is 38 dBmV
Using per transmitter stored initial upstream power = 38 dBmV hwTxId = 0 docsis
UCID = 3
RNG-RSP UsChanId=3 Adj: tim=1907 freq=70 Stat=Continue (CmdPwr (UsChanId-dBmV):
(3-41.25) )
[01:27:43 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0xc9
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (3-
41.25) )
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (3-
41.25) )
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (3-
41.25) )
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (3-
41.25) )
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Success (CmdPwr (UsChanId-dBmV): (3-
41.25) )
[01:27:48 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::FirstRngSuccess:
(CmDocsisCtlThread)
first RNG-RSP w/status==SUCCESS for hwTxId=0 and DOCSIS ucid=3
[01:27:48 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::LaunchEaeBpkm:
(CmDocsisCtlThread) BPKM enabled. starting Early Authentication and Encryption BPKM
key requests. Primary Sid = 201
CM/DocsisCtl> Bandwidth request failure! Status = 0

BcmCmUsChanTimerMuxACT::HandleEvent() @time=5458440 fTimerType=5


(kT4NoStationMaint) hwTxId=0 docs ucid=3
[01:30:58 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::T4NoStationMaintEvent: ERROR - no Station Maint map op error.
hwTxId=0 docs ucid=3
[01:30:58 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::CommonRngErrorHandler: reason=10 (T4NoStationMaintTimeout)
hwTxId=0 docs ucid=3
[01:30:58 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) Purging DS
frequency 715000000 from current scan pass due to pre-registration restart error
[01:30:58 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) reinit MAC #26:
T4NoStationMaintTimeout

[01:30:58 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::Reset:


(CmDocsisCtlThread) DefaultSnmpAgentClass::RestartPendingEvent for Vendor CM
Agent w/ BRCM Factory Support
Logging event: Received Response to Broadcast Maintenance Request, But no Unicast
Maintenance opportunities received - T4 time out;CM-MAC=fc:4a:e9:de:ad:88;CMTS-
MAC=28:52:61:fa:d8:78;CM-QOS=1.1;CM-VER=3.1;
Vendor CM Agent w/ BRCM Factory Support updating ifTableLastChange.
Vendor CM Agent w/ BRCM Factory Support resetting to default state.
Vendor CM Agent w/ BRCM Factory Support destroying users...
Vendor CM Agent w/ BRCM Factory Support destroying notifies...
Vendor CM Agent w/ BRCM Factory Support destroying views...
Allowing DOCS-CABLE-DEVICE-MIB IP filters.
Vendor CM Agent w/ BRCM Factory Support deferring traps.
Received RG Event 0x80000001 State 0x1
eRouter Linux WAN Down
[01:30:58 01/01/1970] [eRouterMsgPipe] eRouterMsgPipe::UpdateIpNetToMediaEntry:
(eRouterMsgPipe) eRouter IP address:0.0.0.0
01:30:58.730 01/01/1970 (CALC) mtaCmStatusInfo() - MTA is Signaled: *NOT-
OPERATIONAL* (Stat=0x1) emtaCurState = 0.
EmtaSnmpAgent::SoftReset
Pausing trap thread
emta factory agentResetting to default state.
emta factory agent destroying users...
emta factory agent destroying notifies...
emta factory agent destroying views...
emta factory agent entering RFC-2576 Coexistence security mode.
emta factory agent entering Basic/Hybrid flow provisioning mode.
Resuming trap thread
Stopping DHCP/ToD/TFTP (client requested)...
[01:30:58 01/01/1970] [CmDocsisIpThread] BcmEcosIpHalIf::RemoveIpv6Address: (IP
Stack1 HalIf) ERROR - Failed to remove IPv6 address fe80::fe4a:e9ff:fede:ad88/64
from the stack!
[01:30:58 01/01/1970] [CmDocsisIpThread] BcmDhcpV6ClientIf::ReleaseAddresses:
(DHCPv6 ClientIf for IP Stack1) ERROR - IA state is initial; there is no address to
release.
BcmDocsis3DsMacEnableMulticastDsidForwarding 0; primary DS = 0
SCQAM DSID filter control = 0x00
OFDM DSID filter control = 0x01
Deleting DOCSIS 1.0 CoS Settings for SID 0xc9
[01:30:59 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows:
(DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along
with associated Classifiers and PHS rules...
[01:30:59 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState:
(CmDocsisCtlThread)
[01:30:59 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Primary SID for usHwChannel 0 to 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 1
Updating US chan 8 data Profile test msg for Sid: 0x0.
Updating US chan 9 data Profile test msg for Sid: 0x0.
CM/DocsisCtl> [01:30:59 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL declared PULSE lost!
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=false
[01:30:59 01/01/1970] [CmDocsisCtlThread] BcmCmMultiDsHelper::PreRegDsChanChange:
target freq hz = 0
reason string = ErrorRecovery
CmInitReason = 16

Starting DS scanning...
[01:30:59 01/01/1970] [CmDocsisCtlThread] BcmCmDownstreamScan::StartScan: Starting
DS scan
Checking for cable cut...

CM/DocsisCtl> Plant power is 15.55

Cable connected

CM/DocsisCtl> Scanning 716.000 MHz SC-QAM (Annex A(Eu.1M))


Scanning 717.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 718.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 719.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 720.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 721.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 722.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 723.000 MHz SC-QAM (Annex A(Eu.1M)) locked SC-QAM
[01:31:02 01/01/1970] [CmDocsisCtlThread] BcmCmDsChan::DsLockOk: (BcmCmDsChan 0)
hwRxId=0 freq=0 dcid=0

******************************************
DOWNSTREAM STATUS
******************************************
HW Channel ID = 0
Phy type: SC-QAM
DS active chan settings:
ds chan id = 0
center freq, Hz = 723000000 Hz
primary capable = false
status event rpt bitmask = 0

CM HW Detected DS Phy Settings:


Center Freq, Hz = 723000000
QAM = Locked
FEC = Locked
Carrier Freq Offset, kHz = 0
Channel Width, Hz = 8000000
Modulation = Qam256
Interleaver = Taps12Incr17
Symbol Rate, sym/sec = 6952000

******************************************

[01:31:02 01/01/1970] [CmDocsisCtlThread]


BcmCmMacDomainSetsState::StartDsMacMddInit:
**********************************************
Waiting for MDDs...
**********************************************

CM/DocsisCtl>
BcmCmDocsisCtlMsgACT::HandleEvent() @time=5463760 event_code=4 (kCmPriDsMddSetsOk)

MDD diplexer band edge not specified.


MDD Plant US Frequency Range = extended.
Requested Spectrum = US:(0 MHz..85 MHz) DS:(0 MHz..0 MHz)
Best Match = 0: US:(5 MHz..85 MHz) DS:(108 MHz..1218 MHz)
Switchable diplexer ECN support disabled. NOT switching diplexer.
[01:31:03 01/01/1970] [CmDocsisCtlThread]
BcmCmMdDsSgDiscState::TrimSgSetWithoutThisDcid:
1 candidate MD-DS-SG remain after TrimSgSetWithoutThisDcid( target_dcid )
for target_dcid=0x19 (25)
[01:31:03 01/01/1970] [CmDocsisCtlThread] BcmCmMdDsSgDiscState::StartMdDsSgDisc:
special case: one and only one MD-DS-SG contains mdd_dcid.
fMdDsSgId=0x1d (29)
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , M-d++a+i-+Ty-eA+dA++e|:
i_L-ca+A++e|A: 1
Chec+ +D_A++e|A
Cha++e+ Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1

MD-DS-SG discovery info:

fCmMdDsSgDiscState = 6 (kMdDsSgDiscDone)
fMdDsSgId = 0x1d (29)
fMdDsSgDiscovered = true

Trimmed Candidate Downstream Service Group Settings List: list size = 1

sgid size member dcid's


---- ---- -------------
29 34 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
27 28 29 30 31 32 159 160

Downstream Active Channel Settings List:

dcid type frequency prim capable rpt enable mod/annex or PLC params
---- -------- --------- ------------ ---------- -----------------------
1 SC-QAM 531000000 y 0x36 256QAM/AnnexA
2 SC-QAM 539000000 y 0x36 256QAM/AnnexA
3 SC-QAM 547000000 y 0x36 256QAM/AnnexA
4 SC-QAM 555000000 y 0x36 256QAM/AnnexA
5 SC-QAM 563000000 y 0x36 256QAM/AnnexA
6 SC-QAM 571000000 y 0x36 256QAM/AnnexA
7 SC-QAM 579000000 y 0x36 256QAM/AnnexA
8 SC-QAM 587000000 y 0x36 256QAM/AnnexA
9 SC-QAM 595000000 y 0x36 256QAM/AnnexA
10 SC-QAM 603000000 y 0x36 256QAM/AnnexA
11 SC-QAM 611000000 y 0x36 256QAM/AnnexA
12 SC-QAM 619000000 y 0x36 256QAM/AnnexA
13 SC-QAM 627000000 y 0x36 256QAM/AnnexA
14 SC-QAM 635000000 y 0x36 256QAM/AnnexA
15 SC-QAM 643000000 y 0x36 256QAM/AnnexA
16 SC-QAM 651000000 y 0x36 256QAM/AnnexA
17 SC-QAM 659000000 y 0x36 256QAM/AnnexA
18 SC-QAM 667000000 y 0x36 256QAM/AnnexA
19 SC-QAM 675000000 y 0x36 256QAM/AnnexA
20 SC-QAM 683000000 y 0x36 256QAM/AnnexA
21 SC-QAM 691000000 y 0x36 256QAM/AnnexA
22 SC-QAM 699000000 y 0x36 256QAM/AnnexA
23 SC-QAM 707000000 y 0x36 256QAM/AnnexA
24 SC-QAM 715000000 y 0x36 256QAM/AnnexA
25 SC-QAM 723000000 y 0x36 256QAM/AnnexA
26 SC-QAM 731000000 y 0x36 256QAM/AnnexA
27 SC-QAM 739000000 y 0x36 256QAM/AnnexA
28 SC-QAM 747000000 y 0x36 256QAM/AnnexA
29 SC-QAM 755000000 y 0x36 256QAM/AnnexA
30 SC-QAM 763000000 y 0x36 256QAM/AnnexA
31 SC-QAM 771000000 y 0x36 256QAM/AnnexA
32 SC-QAM 779000000 y 0x36 256QAM/AnnexA
159 OFDM PLC 897000000 n 0x36 25Khz/5us/0.625us
160 OFDM PLC 361000000 n 0x36 50Khz/0.9375us/0.625us

Trimmed Downstream Ambiguity Resolution Frequency List: list size = 3

531000000-sc_qam 539000000-sc_qam 547000000-sc_qam

visible dcid set = 25

freq with visible dcid set = 723000000

BcmCmDocsisCtlMsgACT::HandleEvent() @time=5464350 event_code=11


(kCmMdDsSgDiscDone)
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=true
[01:31:04 01/01/1970] [CmDocsisCtlThread]
BcmDocsisCmHalIf::SetPrimaryDownstreamChannel: (DOCSIS CableModem HalIf)
Installing primary downstream channel index: 0
SetRatios called with primary downstream channel number = 0
AnnexMode[0] = 1 QAM_Mode[0] = 256
Num/Den = 869/1280
3390 SCDMA/OFDM mode - ChannelNumber = 0 Numerator = 869 Denominator = 1280
CM/DocsisCtl> [01:31:04 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL failed to acquire sync or lost sync!
... TCOFDM - DTR is now locked.... (T2=150ms Sync=14)
Given a 216 MHz TCOFDM clock, the nominal value for the DTR FCW is 0xC22E45067
The DTR FCW is 0xc22e91b3 - that value is good (6, within 100 ppm)
Kicked off the DPLL
LE Done bit was set
LE Done bit was set
SCQAM DS clock source.
PLL in Leaky mode.
PLL Fn = 6, k1 = 18, k2 = 19
[01:31:04 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context=1 (ErrorRecovery)
[01:31:04 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context is error recovery or startup.
Always use last good upstream target chan id=1
[01:31:04 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper) Locked on the downstream. Waiting for UCDs...
[01:31:04 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefFail: (Cm
Multi US Helper) target hwTxId=0
CM/DocsisCtl> [01:31:06 01/01/1970] [CmDocsisCtlThread]
BcmCmMultiUsHelper::TmUcdRxTimerEvent: (Cm Multi US Helper)
ucd gathering ok.

[01:31:06 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper) state at
entry:

Channel targeting:
Downstream:
fTargetDsFreqHz = 0 (0)
fCurrentDsFreqHz = 0x2b181ac0 (723000000)
fStoredDsFreqHz = 0x29020c00 (688000000)

Upstream:
fDestSingleTxTargetUsChanId = 0x1 (1)
fTargetingContext = 1 (ErrorRecovery)

Startup UCD Selection Info:

low priority candidate ucid list = 4 1 3 2 7 5 8 6


happy home ucid set = 1 2 3 4

Upstream Active Channel Settings:

ucid rpt enable sel prio MAP source dcid's


---- ---------- -------- -----------------
1 0x1c0 0
2 0x1c0 0
3 0x1c0 0
4 0x1c0 0
5 0x1c0 0
6 0x1c0 0
7 0x1c0 0
8 0x1c0 0
BcmCmUsTargetMset (a.k.a. usable UCDs gathered during startup):

us config
phy change ranging scdma
type ucid dcid count tried? enabled?
---- ---- ---- ------ ------- --------
3 1 25 4 n n
3 2 25 4 n n
3 3 25 4 n n
3 4 25 4 n n
3 5 25 4 n n
3 6 25 4 n n
3 7 25 4 n n
3 8 25 4 n n

[01:31:06 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper)
starting docs3 upstream initialization on target ucid=4
with upstream phy type 3 on hardware transmitter index 0

[01:31:06 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::ExecuteTccCmd: hwTxId=0


docs ucid=0
[01:31:06 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0
[01:31:06 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::InstallUsSets: Installing
UCD w/ucid for UCID=4 for CM hardware tx chan 0

[01:31:06 01/01/1970] [CmDocsisCtlThread]


BcmCmUsSetsState::TestAndLaunchUsTimeSync: starting upstream time sync
acquisition...
[01:31:06 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefOk: (Cm
Multi US Helper) target hwTxId=0
[01:31:06 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::UsTimeRefOk: upstream time
sync acquired for fHwTxId=0

== Beginning initial ranging for Docsis UCID 4 ==


Minimum transmit power is 17 dBmV
Maximum transmit power is 53 dBmV
Stored power level for UCID 4 is 42 dBmV
Using per transmitter stored initial upstream power = 42 dBmV hwTxId = 0 docsis
UCID = 4
RNG-RSP UsChanId=4 Adj: tim=1968 freq=26 Stat=Continue (CmdPwr (UsChanId-dBmV):
(4-41.75) )
[01:31:07 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0xc9
RNG-RSP UsChanId=4 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (4-
41.75) )
RNG-RSP UsChanId=4 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (4-
41.75) )
RNG-RSP UsChanId=4 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (4-
41.75) )
RNG-RSP UsChanId=4 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (4-
41.75) )
RNG-RSP UsChanId=4 Adj: tim=0 freq=0 Stat=Success (CmdPwr (UsChanId-dBmV): (4-
41.75) )
[01:31:12 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::FirstRngSuccess:
(CmDocsisCtlThread)
first RNG-RSP w/status==SUCCESS for hwTxId=0 and DOCSIS ucid=4
[01:31:12 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::LaunchEaeBpkm:
(CmDocsisCtlThread) BPKM enabled. starting Early Authentication and Encryption BPKM
key requests. Primary Sid = 201
CM/DocsisCtl> Bandwidth request failure! Status = 0

BcmCmUsChanTimerMuxACT::HandleEvent() @time=5661700 fTimerType=5


(kT4NoStationMaint) hwTxId=0 docs ucid=4
[01:34:21 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::T4NoStationMaintEvent: ERROR - no Station Maint map op error.
hwTxId=0 docs ucid=4
[01:34:21 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::CommonRngErrorHandler: reason=10 (T4NoStationMaintTimeout)
hwTxId=0 docs ucid=4
[01:34:21 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) Purging DS
frequency 723000000 from current scan pass due to pre-registration restart error
[01:34:21 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) reinit MAC #27:
T4NoStationMaintTimeout

[01:34:21 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::Reset:


(CmDocsisCtlThread) DefaultSnmpAgentClass::RestartPendingEvent for Vendor CM
Agent w/ BRCM Factory Support
Logging event: Received Response to Broadcast Maintenance Request, But no Unicast
Maintenance opportunities received - T4 time out;CM-MAC=fc:4a:e9:de:ad:88;CMTS-
MAC=28:52:61:fa:d8:78;CM-QOS=1.1;CM-VER=3.1;
Vendor CM Agent w/ BRCM Factory Support updating ifTableLastChange.
Vendor CM Agent w/ BRCM Factory Support resetting to default state.
Vendor CM Agent w/ BRCM Factory Support destroying users...
Vendor CM Agent w/ BRCM Factory Support destroying notifies...
Vendor CM Agent w/ BRCM Factory Support destroying views...
Allowing DOCS-CABLE-DEVICE-MIB IP filters.
Vendor CM Agent w/ BRCM Factory Support deferring traps.
Received RG Event 0x80000001 State 0x1
eRouter Linux WAN Down
[01:34:21 01/01/1970] [eRouterMsgPipe] eRouterMsgPipe::UpdateIpNetToMediaEntry:
(eRouterMsgPipe) eRouter IP address:0.0.0.0
01:34:21.990 01/01/1970 (CALC) mtaCmStatusInfo() - MTA is Signaled: *NOT-
OPERATIONAL* (Stat=0x1) emtaCurState = 0.
EmtaSnmpAgent::SoftReset
Pausing trap thread
emta factory agentResetting to default state.
emta factory agent destroying users...
emta factory agent destroying notifies...
emta factory agent destroying views...
emta factory agent entering RFC-2576 Coexistence security mode.
emta factory agent entering Basic/Hybrid flow provisioning mode.
Resuming trap thread
Stopping DHCP/ToD/TFTP (client requested)...
[01:34:22 01/01/1970] [CmDocsisIpThread] BcmEcosIpHalIf::RemoveIpv6Address: (IP
Stack1 HalIf) ERROR - Failed to remove IPv6 address fe80::fe4a:e9ff:fede:ad88/64
from the stack!
[01:34:22 01/01/1970] [CmDocsisIpThread] BcmDhcpV6ClientIf::ReleaseAddresses:
(DHCPv6 ClientIf for IP Stack1) ERROR - IA state is initial; there is no address to
release.
BcmDocsis3DsMacEnableMulticastDsidForwarding 0; primary DS = 0
SCQAM DSID filter control = 0x00
OFDM DSID filter control = 0x01
Deleting DOCSIS 1.0 CoS Settings for SID 0xc9
[01:34:22 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows:
(DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along
with associated Classifiers and PHS rules...
[01:34:22 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState:
(CmDocsisCtlThread)
[01:34:22 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Primary SID for usHwChannel 0 to 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 1
Updating US chan 8 data Profile test msg for Sid: 0x0.
Updating US chan 9 data Profile test msg for Sid: 0x0.
CM/DocsisCtl> [01:34:23 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL declared PULSE lost!
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=false
[01:34:23 01/01/1970] [CmDocsisCtlThread] BcmCmMultiDsHelper::PreRegDsChanChange:
target freq hz = 0
reason string = ErrorRecovery
CmInitReason = 16

Starting DS scanning...
[01:34:23 01/01/1970] [CmDocsisCtlThread] BcmCmDownstreamScan::StartScan: Starting
DS scan
Checking for cable cut...

CM/DocsisCtl> Plant power is 15.55

Cable connected

CM/DocsisCtl> Scanning 724.000 MHz SC-QAM (Annex A(Eu.1M))


Scanning 725.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 726.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 727.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 728.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 729.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 730.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 731.000 MHz SC-QAM (Annex A(Eu.1M)) locked SC-QAM
[01:34:26 01/01/1970] [CmDocsisCtlThread] BcmCmDsChan::DsLockOk: (BcmCmDsChan 0)
hwRxId=0 freq=0 dcid=0

******************************************
DOWNSTREAM STATUS
******************************************
HW Channel ID = 0
Phy type: SC-QAM
DS active chan settings:
ds chan id = 0
center freq, Hz = 731000000 Hz
primary capable = false
status event rpt bitmask = 0

CM HW Detected DS Phy Settings:


Center Freq, Hz = 731000000
QAM = Locked
FEC = Locked
Carrier Freq Offset, kHz = 0
Channel Width, Hz = 8000000
Modulation = Qam256
Interleaver = Taps12Incr17
Symbol Rate, sym/sec = 6952000

******************************************

[01:34:26 01/01/1970] [CmDocsisCtlThread]


BcmCmMacDomainSetsState::StartDsMacMddInit:
**********************************************
Waiting for MDDs...
**********************************************

CM/DocsisCtl>
BcmCmDocsisCtlMsgACT::HandleEvent() @time=5667760 event_code=4 (kCmPriDsMddSetsOk)

MDD diplexer band edge not specified.


MDD Plant US Frequency Range = extended.
Requested Spectrum = US:(0 MHz..85 MHz) DS:(0 MHz..0 MHz)
Best Match = 0: US:(5 MHz..85 MHz) DS:(108 MHz..1218 MHz)
Switchable diplexer ECN support disabled. NOT switching diplexer.
[01:34:27 01/01/1970] [CmDocsisCtlThread]
BcmCmMdDsSgDiscState::TrimSgSetWithoutThisDcid:
1 candidate MD-DS-SG remain after TrimSgSetWithoutThisDcid( target_dcid )
for target_dcid=0x1a (26)
[01:34:27 01/01/1970] [CmDocsisCtlThread] BcmCmMdDsSgDiscState::StartMdDsSgDisc:
special case: one and only one MD-DS-SG contains mdd_dcid.
fMdDsSgId=0x1d (29)
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , M-d++a+i-+Ty-eA+dA++e|:
i_L-ca+A++e|A: 1
Chec+ +D_A++e|A
Cha++e+ Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1

MD-DS-SG discovery info:

fCmMdDsSgDiscState = 6 (kMdDsSgDiscDone)
fMdDsSgId = 0x1d (29)
fMdDsSgDiscovered = true

Trimmed Candidate Downstream Service Group Settings List: list size = 1

sgid size member dcid's


---- ---- -------------
29 34 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
27 28 29 30 31 32 159 160

Downstream Active Channel Settings List:

dcid type frequency prim capable rpt enable mod/annex or PLC params
---- -------- --------- ------------ ---------- -----------------------
1 SC-QAM 531000000 y 0x36 256QAM/AnnexA
2 SC-QAM 539000000 y 0x36 256QAM/AnnexA
3 SC-QAM 547000000 y 0x36 256QAM/AnnexA
4 SC-QAM 555000000 y 0x36 256QAM/AnnexA
5 SC-QAM 563000000 y 0x36 256QAM/AnnexA
6 SC-QAM 571000000 y 0x36 256QAM/AnnexA
7 SC-QAM 579000000 y 0x36 256QAM/AnnexA
8 SC-QAM 587000000 y 0x36 256QAM/AnnexA
9 SC-QAM 595000000 y 0x36 256QAM/AnnexA
10 SC-QAM 603000000 y 0x36 256QAM/AnnexA
11 SC-QAM 611000000 y 0x36 256QAM/AnnexA
12 SC-QAM 619000000 y 0x36 256QAM/AnnexA
13 SC-QAM 627000000 y 0x36 256QAM/AnnexA
14 SC-QAM 635000000 y 0x36 256QAM/AnnexA
15 SC-QAM 643000000 y 0x36 256QAM/AnnexA
16 SC-QAM 651000000 y 0x36 256QAM/AnnexA
17 SC-QAM 659000000 y 0x36 256QAM/AnnexA
18 SC-QAM 667000000 y 0x36 256QAM/AnnexA
19 SC-QAM 675000000 y 0x36 256QAM/AnnexA
20 SC-QAM 683000000 y 0x36 256QAM/AnnexA
21 SC-QAM 691000000 y 0x36 256QAM/AnnexA
22 SC-QAM 699000000 y 0x36 256QAM/AnnexA
23 SC-QAM 707000000 y 0x36 256QAM/AnnexA
24 SC-QAM 715000000 y 0x36 256QAM/AnnexA
25 SC-QAM 723000000 y 0x36 256QAM/AnnexA
26 SC-QAM 731000000 y 0x36 256QAM/AnnexA
27 SC-QAM 739000000 y 0x36 256QAM/AnnexA
28 SC-QAM 747000000 y 0x36 256QAM/AnnexA
29 SC-QAM 755000000 y 0x36 256QAM/AnnexA
30 SC-QAM 763000000 y 0x36 256QAM/AnnexA
31 SC-QAM 771000000 y 0x36 256QAM/AnnexA
32 SC-QAM 779000000 y 0x36 256QAM/AnnexA
159 OFDM PLC 897000000 n 0x36 25Khz/5us/0.625us
160 OFDM PLC 361000000 n 0x36 50Khz/0.9375us/0.625us

Trimmed Downstream Ambiguity Resolution Frequency List: list size = 3

531000000-sc_qam 539000000-sc_qam 547000000-sc_qam

visible dcid set = 26

freq with visible dcid set = 731000000

BcmCmDocsisCtlMsgACT::HandleEvent() @time=5668350 event_code=11


(kCmMdDsSgDiscDone)
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=true
[01:34:28 01/01/1970] [CmDocsisCtlThread]
BcmDocsisCmHalIf::SetPrimaryDownstreamChannel: (DOCSIS CableModem HalIf)
Installing primary downstream channel index: 0
SetRatios called with primary downstream channel number = 0
AnnexMode[0] = 1 QAM_Mode[0] = 256
Num/Den = 869/1280
3390 SCDMA/OFDM mode - ChannelNumber = 0 Numerator = 869 Denominator = 1280
CM/DocsisCtl> [01:34:28 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL failed to acquire sync or lost sync!
... TCOFDM - DTR is now locked.... (T2=149ms Sync=14)

Given a 216 MHz TCOFDM clock, the nominal value for the DTR FCW is 0xC22E45067
The DTR FCW is 0xc22e8f6c - that value is good (5, within 100 ppm)
Kicked off the DPLL
LE Done bit was set
LE Done bit was set
SCQAM DS clock source.
PLL in Leaky mode.
PLL Fn = 6, k1 = 18, k2 = 19
[01:34:28 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context=1 (ErrorRecovery)
[01:34:28 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context is error recovery or startup.
Always use last good upstream target chan id=1
[01:34:28 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper) Locked on the downstream. Waiting for UCDs...
[01:34:28 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefFail: (Cm
Multi US Helper) target hwTxId=0
CM/DocsisCtl> [01:34:30 01/01/1970] [CmDocsisCtlThread]
BcmCmMultiUsHelper::TmUcdRxTimerEvent: (Cm Multi US Helper)
ucd gathering ok.

[01:34:30 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper) state at
entry:

Channel targeting:
Downstream:
fTargetDsFreqHz = 0 (0)
fCurrentDsFreqHz = 0x2b922cc0 (731000000)
fStoredDsFreqHz = 0x29020c00 (688000000)

Upstream:
fDestSingleTxTargetUsChanId = 0x1 (1)
fTargetingContext = 1 (ErrorRecovery)

Startup UCD Selection Info:

low priority candidate ucid list = 1 4 2 3 8 5 7 6


happy home ucid set = 1 2 3 4

Upstream Active Channel Settings:

ucid rpt enable sel prio MAP source dcid's


---- ---------- -------- -----------------
1 0x1c0 0
2 0x1c0 0
3 0x1c0 0
4 0x1c0 0
5 0x1c0 0
6 0x1c0 0
7 0x1c0 0
8 0x1c0 0

BcmCmUsTargetMset (a.k.a. usable UCDs gathered during startup):

us config
phy change ranging scdma
type ucid dcid count tried? enabled?
---- ---- ---- ------ ------- --------
3 1 26 4 n n
3 2 26 4 n n
3 3 26 4 n n
3 4 26 4 n n
3 5 26 4 n n
3 6 26 4 n n
3 7 26 4 n n
3 8 26 4 n n

[01:34:30 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper)
starting docs3 upstream initialization on target ucid=1
with upstream phy type 3 on hardware transmitter index 0

[01:34:30 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::ExecuteTccCmd: hwTxId=0


docs ucid=0
[01:34:30 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0
[01:34:30 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::InstallUsSets: Installing
UCD w/ucid for UCID=1 for CM hardware tx chan 0

[01:34:30 01/01/1970] [CmDocsisCtlThread]


BcmCmUsSetsState::TestAndLaunchUsTimeSync: starting upstream time sync
acquisition...
[01:34:30 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefOk: (Cm
Multi US Helper) target hwTxId=0
[01:34:30 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::UsTimeRefOk: upstream time
sync acquired for fHwTxId=0

== Beginning initial ranging for Docsis UCID 1 ==


Minimum transmit power is 17 dBmV
Maximum transmit power is 53 dBmV
Stored power level for UCID 1 is 39 dBmV
Using per transmitter stored initial upstream power = 39 dBmV hwTxId = 0 docsis
UCID = 1
RNG-RSP UsChanId=1 Adj: tim=1855 freq=48 Stat=Continue (CmdPwr (UsChanId-dBmV):
(1-41.25) )
[01:34:31 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0xc9
RNG-RSP UsChanId=1 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (1-
41.25) )
RNG-RSP UsChanId=1 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (1-
41.25) )
RNG-RSP UsChanId=1 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (1-
41.25) )
RNG-RSP UsChanId=1 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (1-
41.25) )
RNG-RSP UsChanId=1 Adj: tim=0 freq=0 Stat=Success (CmdPwr (UsChanId-dBmV): (1-
41.25) )
[01:34:36 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::FirstRngSuccess:
(CmDocsisCtlThread)
first RNG-RSP w/status==SUCCESS for hwTxId=0 and DOCSIS ucid=1
[01:34:36 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::LaunchEaeBpkm:
(CmDocsisCtlThread) BPKM enabled. starting Early Authentication and Encryption BPKM
key requests. Primary Sid = 201
CM/DocsisCtl> Bandwidth request failure! Status = 0

BcmCmUsChanTimerMuxACT::HandleEvent() @time=5866500 fTimerType=5


(kT4NoStationMaint) hwTxId=0 docs ucid=1
[01:37:46 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::T4NoStationMaintEvent: ERROR - no Station Maint map op error.
hwTxId=0 docs ucid=1
[01:37:46 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::CommonRngErrorHandler: reason=10 (T4NoStationMaintTimeout)
hwTxId=0 docs ucid=1
[01:37:46 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) Purging DS
frequency 731000000 from current scan pass due to pre-registration restart error
[01:37:46 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) reinit MAC #28:
T4NoStationMaintTimeout

[01:37:46 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::Reset:


(CmDocsisCtlThread) DefaultSnmpAgentClass::RestartPendingEvent for Vendor CM
Agent w/ BRCM Factory Support
Logging event: Received Response to Broadcast Maintenance Request, But no Unicast
Maintenance opportunities received - T4 time out;CM-MAC=fc:4a:e9:de:ad:88;CMTS-
MAC=28:52:61:fa:d8:78;CM-QOS=1.1;CM-VER=3.1;
Vendor CM Agent w/ BRCM Factory Support updating ifTableLastChange.
Vendor CM Agent w/ BRCM Factory Support resetting to default state.
Vendor CM Agent w/ BRCM Factory Support destroying users...
Vendor CM Agent w/ BRCM Factory Support destroying notifies...
Vendor CM Agent w/ BRCM Factory Support destroying views...
Allowing DOCS-CABLE-DEVICE-MIB IP filters.
Vendor CM Agent w/ BRCM Factory Support deferring traps.
Received RG Event 0x80000001 State 0x1
eRouter Linux WAN Down
[01:37:46 01/01/1970] [eRouterMsgPipe] eRouterMsgPipe::UpdateIpNetToMediaEntry:
(eRouterMsgPipe) eRouter IP address:0.0.0.0
01:37:46.790 01/01/1970 (CALC) mtaCmStatusInfo() - MTA is Signaled: *NOT-
OPERATIONAL* (Stat=0x1) emtaCurState = 0.
EmtaSnmpAgent::SoftReset
Pausing trap thread
emta factory agentResetting to default state.
emta factory agent destroying users...
emta factory agent destroying notifies...
emta factory agent destroying views...
emta factory agent entering RFC-2576 Coexistence security mode.
emta factory agent entering Basic/Hybrid flow provisioning mode.
Resuming trap thread
Stopping DHCP/ToD/TFTP (client requested)...
[01:37:46 01/01/1970] [CmDocsisIpThread] BcmEcosIpHalIf::RemoveIpv6Address: (IP
Stack1 HalIf) ERROR - Failed to remove IPv6 address fe80::fe4a:e9ff:fede:ad88/64
from the stack!
[01:37:46 01/01/1970] [CmDocsisIpThread] BcmDhcpV6ClientIf::ReleaseAddresses:
(DHCPv6 ClientIf for IP Stack1) ERROR - IA state is initial; there is no address to
release.
BcmDocsis3DsMacEnableMulticastDsidForwarding 0; primary DS = 0
SCQAM DSID filter control = 0x00
OFDM DSID filter control = 0x01
Deleting DOCSIS 1.0 CoS Settings for SID 0xc9
[01:37:47 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows:
(DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along
with associated Classifiers and PHS rules...
[01:37:47 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState:
(CmDocsisCtlThread)
[01:37:47 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Primary SID for usHwChannel 0 to 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 1
Updating US chan 8 data Profile test msg for Sid: 0x0.
Updating US chan 9 data Profile test msg for Sid: 0x0.
CM/DocsisCtl> [01:37:47 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL declared PULSE lost!
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=false
[01:37:48 01/01/1970] [CmDocsisCtlThread] BcmCmMultiDsHelper::PreRegDsChanChange:
target freq hz = 0
reason string = ErrorRecovery
CmInitReason = 16

Starting DS scanning...
[01:37:48 01/01/1970] [CmDocsisCtlThread] BcmCmDownstreamScan::StartScan: Starting
DS scan
Checking for cable cut...
CM/DocsisCtl> Plant power is 15.55

Cable connected

Scanning 732.000 MHz SC-QAM (Annex A(Eu.1M))


CM/DocsisCtl> Scanning 733.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 734.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 735.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 736.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 737.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 738.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 739.000 MHz SC-QAM (Annex A(Eu.1M)) locked SC-QAM
[01:37:50 01/01/1970] [CmDocsisCtlThread] BcmCmDsChan::DsLockOk: (BcmCmDsChan 0)
hwRxId=0 freq=0 dcid=0

******************************************
DOWNSTREAM STATUS
******************************************
HW Channel ID = 0
Phy type: SC-QAM
DS active chan settings:
ds chan id = 0
center freq, Hz = 739000000 Hz
primary capable = false
status event rpt bitmask = 0

CM HW Detected DS Phy Settings:


Center Freq, Hz = 739000000
QAM = Locked
FEC = Locked
Carrier Freq Offset, kHz = 0
Channel Width, Hz = 8000000
Modulation = Qam256
Interleaver = Taps12Incr17
Symbol Rate, sym/sec = 6952000

******************************************

[01:37:51 01/01/1970] [CmDocsisCtlThread]


BcmCmMacDomainSetsState::StartDsMacMddInit:
**********************************************
Waiting for MDDs...
**********************************************

CM/DocsisCtl>
BcmCmDocsisCtlMsgACT::HandleEvent() @time=5871760 event_code=4 (kCmPriDsMddSetsOk)

MDD diplexer band edge not specified.


MDD Plant US Frequency Range = extended.
Requested Spectrum = US:(0 MHz..85 MHz) DS:(0 MHz..0 MHz)
Best Match = 0: US:(5 MHz..85 MHz) DS:(108 MHz..1218 MHz)
Switchable diplexer ECN support disabled. NOT switching diplexer.
[01:37:51 01/01/1970] [CmDocsisCtlThread]
BcmCmMdDsSgDiscState::TrimSgSetWithoutThisDcid:
1 candidate MD-DS-SG remain after TrimSgSetWithoutThisDcid( target_dcid )
for target_dcid=0x1b (27)
[01:37:51 01/01/1970] [CmDocsisCtlThread] BcmCmMdDsSgDiscState::StartMdDsSgDisc:
special case: one and only one MD-DS-SG contains mdd_dcid.
fMdDsSgId=0x1d (29)
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , M-d++a+i-+Ty-eA+dA++e|:
i_L-ca+A++e|A: 1
Chec+ +D_A++e|A
Cha++e+ Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1

MD-DS-SG discovery info:

fCmMdDsSgDiscState = 6 (kMdDsSgDiscDone)
fMdDsSgId = 0x1d (29)
fMdDsSgDiscovered = true

Trimmed Candidate Downstream Service Group Settings List: list size = 1

sgid size member dcid's


---- ---- -------------
29 34 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
27 28 29 30 31 32 159 160

Downstream Active Channel Settings List:

dcid type frequency prim capable rpt enable mod/annex or PLC params
---- -------- --------- ------------ ---------- -----------------------
1 SC-QAM 531000000 y 0x36 256QAM/AnnexA
2 SC-QAM 539000000 y 0x36 256QAM/AnnexA
3 SC-QAM 547000000 y 0x36 256QAM/AnnexA
4 SC-QAM 555000000 y 0x36 256QAM/AnnexA
5 SC-QAM 563000000 y 0x36 256QAM/AnnexA
6 SC-QAM 571000000 y 0x36 256QAM/AnnexA
7 SC-QAM 579000000 y 0x36 256QAM/AnnexA
8 SC-QAM 587000000 y 0x36 256QAM/AnnexA
9 SC-QAM 595000000 y 0x36 256QAM/AnnexA
10 SC-QAM 603000000 y 0x36 256QAM/AnnexA
11 SC-QAM 611000000 y 0x36 256QAM/AnnexA
12 SC-QAM 619000000 y 0x36 256QAM/AnnexA
13 SC-QAM 627000000 y 0x36 256QAM/AnnexA
14 SC-QAM 635000000 y 0x36 256QAM/AnnexA
15 SC-QAM 643000000 y 0x36 256QAM/AnnexA
16 SC-QAM 651000000 y 0x36 256QAM/AnnexA
17 SC-QAM 659000000 y 0x36 256QAM/AnnexA
18 SC-QAM 667000000 y 0x36 256QAM/AnnexA
19 SC-QAM 675000000 y 0x36 256QAM/AnnexA
20 SC-QAM 683000000 y 0x36 256QAM/AnnexA
21 SC-QAM 691000000 y 0x36 256QAM/AnnexA
22 SC-QAM 699000000 y 0x36 256QAM/AnnexA
23 SC-QAM 707000000 y 0x36 256QAM/AnnexA
24 SC-QAM 715000000 y 0x36 256QAM/AnnexA
25 SC-QAM 723000000 y 0x36 256QAM/AnnexA
26 SC-QAM 731000000 y 0x36 256QAM/AnnexA
27 SC-QAM 739000000 y 0x36 256QAM/AnnexA
28 SC-QAM 747000000 y 0x36 256QAM/AnnexA
29 SC-QAM 755000000 y 0x36 256QAM/AnnexA
30 SC-QAM 763000000 y 0x36 256QAM/AnnexA
31 SC-QAM 771000000 y 0x36 256QAM/AnnexA
32 SC-QAM 779000000 y 0x36 256QAM/AnnexA
159 OFDM PLC 897000000 n 0x36 25Khz/5us/0.625us
160 OFDM PLC 361000000 n 0x36 50Khz/0.9375us/0.625us

Trimmed Downstream Ambiguity Resolution Frequency List: list size = 3

531000000-sc_qam 539000000-sc_qam 547000000-sc_qam

visible dcid set = 27

freq with visible dcid set = 739000000

BcmCmDocsisCtlMsgACT::HandleEvent() @time=5872350 event_code=11


(kCmMdDsSgDiscDone)
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=true
[01:37:52 01/01/1970] [CmDocsisCtlThread]
BcmDocsisCmHalIf::SetPrimaryDownstreamChannel: (DOCSIS CableModem HalIf)
Installing primary downstream channel index: 0
SetRatios called with primary downstream channel number = 0
AnnexMode[0] = 1 QAM_Mode[0] = 256
Num/Den = 869/1280
3390 SCDMA/OFDM mode - ChannelNumber = 0 Numerator = 869 Denominator = 1280
CM/DocsisCtl> [01:37:52 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL failed to acquire sync or lost sync!
... TCOFDM - DTR is now locked.... (T2=150ms Sync=14)

Given a 216 MHz TCOFDM clock, the nominal value for the DTR FCW is 0xC22E45067
The DTR FCW is 0xc22e8958 - that value is good (5, within 100 ppm)
Kicked off the DPLL
LE Done bit was set
LE Done bit was set
SCQAM DS clock source.
PLL in Leaky mode.
PLL Fn = 6, k1 = 18, k2 = 19
[01:37:52 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context=1 (ErrorRecovery)
[01:37:52 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context is error recovery or startup.
Always use last good upstream target chan id=1
[01:37:52 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper) Locked on the downstream. Waiting for UCDs...
[01:37:52 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefFail: (Cm
Multi US Helper) target hwTxId=0
CM/DocsisCtl> [01:37:54 01/01/1970] [CmDocsisCtlThread]
BcmCmMultiUsHelper::TmUcdRxTimerEvent: (Cm Multi US Helper)
ucd gathering ok.

[01:37:54 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper) state at
entry:

Channel targeting:
Downstream:
fTargetDsFreqHz = 0 (0)
fCurrentDsFreqHz = 0x2c0c3ec0 (739000000)
fStoredDsFreqHz = 0x29020c00 (688000000)

Upstream:
fDestSingleTxTargetUsChanId = 0x1 (1)
fTargetingContext = 1 (ErrorRecovery)

Startup UCD Selection Info:

low priority candidate ucid list = 3 4 1 2 8 6 7 5


happy home ucid set = 1 2 3 4

Upstream Active Channel Settings:

ucid rpt enable sel prio MAP source dcid's


---- ---------- -------- -----------------
1 0x1c0 0
2 0x1c0 0
3 0x1c0 0
4 0x1c0 0
5 0x1c0 0
6 0x1c0 0
7 0x1c0 0
8 0x1c0 0

BcmCmUsTargetMset (a.k.a. usable UCDs gathered during startup):

us config
phy change ranging scdma
type ucid dcid count tried? enabled?
---- ---- ---- ------ ------- --------
3 1 27 4 n n
3 2 27 4 n n
3 3 27 4 n n
3 4 27 4 n n
3 5 27 4 n n
3 6 27 4 n n
3 7 27 4 n n
3 8 27 4 n n

[01:37:54 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper)
starting docs3 upstream initialization on target ucid=3
with upstream phy type 3 on hardware transmitter index 0

[01:37:54 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::ExecuteTccCmd: hwTxId=0


docs ucid=0
[01:37:54 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0
[01:37:54 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::InstallUsSets: Installing
UCD w/ucid for UCID=3 for CM hardware tx chan 0

[01:37:54 01/01/1970] [CmDocsisCtlThread]


BcmCmUsSetsState::TestAndLaunchUsTimeSync: starting upstream time sync
acquisition...
[01:37:54 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefOk: (Cm
Multi US Helper) target hwTxId=0
[01:37:54 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::UsTimeRefOk: upstream time
sync acquired for fHwTxId=0

== Beginning initial ranging for Docsis UCID 3 ==


Minimum transmit power is 17 dBmV
Maximum transmit power is 53 dBmV
Stored power level for UCID 3 is 38 dBmV
Using per transmitter stored initial upstream power = 38 dBmV hwTxId = 0 docsis
UCID = 3
RNG-RSP UsChanId=3 Adj: tim=1887 freq=-31 Stat=Continue (CmdPwr (UsChanId-dBmV):
(3-41.25) )
[01:37:55 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0xc9
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (3-
41.25) )
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (3-
41.25) )
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (3-
41.25) )
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (3-
41.25) )
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Success (CmdPwr (UsChanId-dBmV): (3-
41.25) )
[01:38:00 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::FirstRngSuccess:
(CmDocsisCtlThread)
first RNG-RSP w/status==SUCCESS for hwTxId=0 and DOCSIS ucid=3
[01:38:00 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::LaunchEaeBpkm:
(CmDocsisCtlThread) BPKM enabled. starting Early Authentication and Encryption BPKM
key requests. Primary Sid = 201
CM/DocsisCtl> Bandwidth request failure! Status = 0

BcmCmUsChanTimerMuxACT::HandleEvent() @time=6070020 fTimerType=5


(kT4NoStationMaint) hwTxId=0 docs ucid=3
[01:41:10 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::T4NoStationMaintEvent: ERROR - no Station Maint map op error.
hwTxId=0 docs ucid=3
[01:41:10 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::CommonRngErrorHandler: reason=10 (T4NoStationMaintTimeout)
hwTxId=0 docs ucid=3
[01:41:10 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) Purging DS
frequency 739000000 from current scan pass due to pre-registration restart error
[01:41:10 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) reinit MAC #29:
T4NoStationMaintTimeout

[01:41:10 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::Reset:


(CmDocsisCtlThread) DefaultSnmpAgentClass::RestartPendingEvent for Vendor CM
Agent w/ BRCM Factory Support
Logging event: Received Response to Broadcast Maintenance Request, But no Unicast
Maintenance opportunities received - T4 time out;CM-MAC=fc:4a:e9:de:ad:88;CMTS-
MAC=28:52:61:fa:d8:78;CM-QOS=1.1;CM-VER=3.1;
Vendor CM Agent w/ BRCM Factory Support updating ifTableLastChange.
Vendor CM Agent w/ BRCM Factory Support resetting to default state.
Vendor CM Agent w/ BRCM Factory Support destroying users...
Vendor CM Agent w/ BRCM Factory Support destroying notifies...
Vendor CM Agent w/ BRCM Factory Support destroying views...
Allowing DOCS-CABLE-DEVICE-MIB IP filters.
Vendor CM Agent w/ BRCM Factory Support deferring traps.
CM/DocsisCtl> Received RG Event 0x80000001 State 0x1
eRouter Linux WAN Down
[01:41:10 01/01/1970] [eRouterMsgPipe] eRouterMsgPipe::UpdateIpNetToMediaEntry:
(eRouterMsgPipe) eRouter IP address:0.0.0.0
01:41:10.310 01/01/1970 (CALC) mtaCmStatusInfo() - MTA is Signaled: *NOT-
OPERATIONAL* (Stat=0x1) emtaCurState = 0.
EmtaSnmpAgent::SoftReset
Pausing trap thread
emta factory agentResetting to default state.
emta factory agent destroying users...
emta factory agent destroying notifies...
emta factory agent destroying views...
emta factory agent entering RFC-2576 Coexistence security mode.
emta factory agent entering Basic/Hybrid flow provisioning mode.
Resuming trap thread
Stopping DHCP/ToD/TFTP (client requested)...
[01:41:10 01/01/1970] [CmDocsisIpThread] BcmEcosIpHalIf::RemoveIpv6Address: (IP
Stack1 HalIf) ERROR - Failed to remove IPv6 address fe80::fe4a:e9ff:fede:ad88/64
from the stack!
[01:41:10 01/01/1970] [CmDocsisIpThread] BcmDhcpV6ClientIf::ReleaseAddresses:
(DHCPv6 ClientIf for IP Stack1) ERROR - IA state is initial; there is no address to
release.
BcmDocsis3DsMacEnableMulticastDsidForwarding 0; primary DS = 0
SCQAM DSID filter control = 0x00
OFDM DSID filter control = 0x01
CM/DocsisCtl> Deleting DOCSIS 1.0 CoS Settings for SID 0xc9
[01:41:10 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows:
(DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along
with associated Classifiers and PHS rules...
[01:41:10 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState:
(CmDocsisCtlThread)
[01:41:10 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Primary SID for usHwChannel 0 to 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 1
Updating US chan 8 data Profile test msg for Sid: 0x0.
Updating US chan 9 data Profile test msg for Sid: 0x0.
CM/DocsisCtl> [01:41:11 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL declared PULSE lost!
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=false
[01:41:11 01/01/1970] [CmDocsisCtlThread] BcmCmMultiDsHelper::PreRegDsChanChange:
target freq hz = 0
reason string = ErrorRecovery
CmInitReason = 16

Starting DS scanning...
[01:41:11 01/01/1970] [CmDocsisCtlThread] BcmCmDownstreamScan::StartScan: Starting
DS scan
Checking for cable cut...

CM/DocsisCtl> Plant power is 15.55

Cable connected

CM/DocsisCtl> Scanning 740.000 MHz SC-QAM (Annex A(Eu.1M))


Scanning 741.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 742.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 743.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 744.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 745.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 746.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 747.000 MHz SC-QAM (Annex A(Eu.1M)) locked SC-QAM
[01:41:14 01/01/1970] [CmDocsisCtlThread] BcmCmDsChan::DsLockOk: (BcmCmDsChan 0)
hwRxId=0 freq=0 dcid=0

******************************************
DOWNSTREAM STATUS
******************************************
HW Channel ID = 0
Phy type: SC-QAM
DS active chan settings:
ds chan id = 0
center freq, Hz = 747000000 Hz
primary capable = false
status event rpt bitmask = 0
CM HW Detected DS Phy Settings:
Center Freq, Hz = 747000000
QAM = Locked
FEC = Locked
Carrier Freq Offset, kHz = 0
Channel Width, Hz = 8000000
Modulation = Qam256
Interleaver = Taps12Incr17
Symbol Rate, sym/sec = 6952000

******************************************

[01:41:14 01/01/1970] [CmDocsisCtlThread]


BcmCmMacDomainSetsState::StartDsMacMddInit:
**********************************************
Waiting for MDDs...
**********************************************

CM/DocsisCtl>
BcmCmDocsisCtlMsgACT::HandleEvent() @time=6075760 event_code=4 (kCmPriDsMddSetsOk)

MDD diplexer band edge not specified.


MDD Plant US Frequency Range = extended.
Requested Spectrum = US:(0 MHz..85 MHz) DS:(0 MHz..0 MHz)
Best Match = 0: US:(5 MHz..85 MHz) DS:(108 MHz..1218 MHz)
Switchable diplexer ECN support disabled. NOT switching diplexer.
[01:41:15 01/01/1970] [CmDocsisCtlThread]
BcmCmMdDsSgDiscState::TrimSgSetWithoutThisDcid:
1 candidate MD-DS-SG remain after TrimSgSetWithoutThisDcid( target_dcid )
for target_dcid=0x1c (28)
[01:41:15 01/01/1970] [CmDocsisCtlThread] BcmCmMdDsSgDiscState::StartMdDsSgDisc:
special case: one and only one MD-DS-SG contains mdd_dcid.
fMdDsSgId=0x1d (29)
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , M-d++a+i-+Ty-eA+dA++e|:
i_L-ca+A++e|A: 1
Chec+ +D_A++e|A
Cha++e+ Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1

MD-DS-SG discovery info:

fCmMdDsSgDiscState = 6 (kMdDsSgDiscDone)
fMdDsSgId = 0x1d (29)
fMdDsSgDiscovered = true

Trimmed Candidate Downstream Service Group Settings List: list size = 1

sgid size member dcid's


---- ---- -------------
29 34 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
27 28 29 30 31 32 159 160

Downstream Active Channel Settings List:

dcid type frequency prim capable rpt enable mod/annex or PLC params
---- -------- --------- ------------ ---------- -----------------------
1 SC-QAM 531000000 y 0x36 256QAM/AnnexA
2 SC-QAM 539000000 y 0x36 256QAM/AnnexA
3 SC-QAM 547000000 y 0x36 256QAM/AnnexA
4 SC-QAM 555000000 y 0x36 256QAM/AnnexA
5 SC-QAM 563000000 y 0x36 256QAM/AnnexA
6 SC-QAM 571000000 y 0x36 256QAM/AnnexA
7 SC-QAM 579000000 y 0x36 256QAM/AnnexA
8 SC-QAM 587000000 y 0x36 256QAM/AnnexA
9 SC-QAM 595000000 y 0x36 256QAM/AnnexA
10 SC-QAM 603000000 y 0x36 256QAM/AnnexA
11 SC-QAM 611000000 y 0x36 256QAM/AnnexA
12 SC-QAM 619000000 y 0x36 256QAM/AnnexA
13 SC-QAM 627000000 y 0x36 256QAM/AnnexA
14 SC-QAM 635000000 y 0x36 256QAM/AnnexA
15 SC-QAM 643000000 y 0x36 256QAM/AnnexA
16 SC-QAM 651000000 y 0x36 256QAM/AnnexA
17 SC-QAM 659000000 y 0x36 256QAM/AnnexA
18 SC-QAM 667000000 y 0x36 256QAM/AnnexA
19 SC-QAM 675000000 y 0x36 256QAM/AnnexA
20 SC-QAM 683000000 y 0x36 256QAM/AnnexA
21 SC-QAM 691000000 y 0x36 256QAM/AnnexA
22 SC-QAM 699000000 y 0x36 256QAM/AnnexA
23 SC-QAM 707000000 y 0x36 256QAM/AnnexA
24 SC-QAM 715000000 y 0x36 256QAM/AnnexA
25 SC-QAM 723000000 y 0x36 256QAM/AnnexA
26 SC-QAM 731000000 y 0x36 256QAM/AnnexA
27 SC-QAM 739000000 y 0x36 256QAM/AnnexA
28 SC-QAM 747000000 y 0x36 256QAM/AnnexA
29 SC-QAM 755000000 y 0x36 256QAM/AnnexA
30 SC-QAM 763000000 y 0x36 256QAM/AnnexA
31 SC-QAM 771000000 y 0x36 256QAM/AnnexA
32 SC-QAM 779000000 y 0x36 256QAM/AnnexA
159 OFDM PLC 897000000 n 0x36 25Khz/5us/0.625us
160 OFDM PLC 361000000 n 0x36 50Khz/0.9375us/0.625us

Trimmed Downstream Ambiguity Resolution Frequency List: list size = 3

531000000-sc_qam 539000000-sc_qam 547000000-sc_qam

visible dcid set = 28

freq with visible dcid set = 747000000

BcmCmDocsisCtlMsgACT::HandleEvent() @time=6076350 event_code=11


(kCmMdDsSgDiscDone)
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=true
[01:41:16 01/01/1970] [CmDocsisCtlThread]
BcmDocsisCmHalIf::SetPrimaryDownstreamChannel: (DOCSIS CableModem HalIf)
Installing primary downstream channel index: 0
SetRatios called with primary downstream channel number = 0
AnnexMode[0] = 1 QAM_Mode[0] = 256
Num/Den = 869/1280
3390 SCDMA/OFDM mode - ChannelNumber = 0 Numerator = 869 Denominator = 1280
CM/DocsisCtl> [01:41:16 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL failed to acquire sync or lost sync!
... TCOFDM - DTR is now locked.... (T2=150ms Sync=14)

Given a 216 MHz TCOFDM clock, the nominal value for the DTR FCW is 0xC22E45067
The DTR FCW is 0xc22e811e - that value is good (4, within 100 ppm)
Kicked off the DPLL
LE Done bit was set
LE Done bit was set
SCQAM DS clock source.
PLL in Leaky mode.
PLL Fn = 6, k1 = 18, k2 = 19
[01:41:16 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context=1 (ErrorRecovery)
[01:41:16 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context is error recovery or startup.
Always use last good upstream target chan id=1
[01:41:16 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper) Locked on the downstream. Waiting for UCDs...
[01:41:16 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefFail: (Cm
Multi US Helper) target hwTxId=0
CM/DocsisCtl> [01:41:18 01/01/1970] [CmDocsisCtlThread]
BcmCmMultiUsHelper::TmUcdRxTimerEvent: (Cm Multi US Helper)
ucd gathering ok.

[01:41:18 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper) state at
entry:

Channel targeting:
Downstream:
fTargetDsFreqHz = 0 (0)
fCurrentDsFreqHz = 0x2c8650c0 (747000000)
fStoredDsFreqHz = 0x29020c00 (688000000)

Upstream:
fDestSingleTxTargetUsChanId = 0x1 (1)
fTargetingContext = 1 (ErrorRecovery)

Startup UCD Selection Info:

low priority candidate ucid list = 4 3 2 1 7 8 5 6


happy home ucid set = 1 2 3 4

Upstream Active Channel Settings:

ucid rpt enable sel prio MAP source dcid's


---- ---------- -------- -----------------
1 0x1c0 0
2 0x1c0 0
3 0x1c0 0
4 0x1c0 0
5 0x1c0 0
6 0x1c0 0
7 0x1c0 0
8 0x1c0 0

BcmCmUsTargetMset (a.k.a. usable UCDs gathered during startup):

us config
phy change ranging scdma
type ucid dcid count tried? enabled?
---- ---- ---- ------ ------- --------
3 1 28 4 n n
3 2 28 4 n n
3 3 28 4 n n
3 4 28 4 n n
3 5 28 4 n n
3 6 28 4 n n
3 7 28 4 n n
3 8 28 4 n n

[01:41:18 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper)
starting docs3 upstream initialization on target ucid=4
with upstream phy type 3 on hardware transmitter index 0

[01:41:18 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::ExecuteTccCmd: hwTxId=0


docs ucid=0
[01:41:18 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0
[01:41:18 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::InstallUsSets: Installing
UCD w/ucid for UCID=4 for CM hardware tx chan 0

[01:41:18 01/01/1970] [CmDocsisCtlThread]


BcmCmUsSetsState::TestAndLaunchUsTimeSync: starting upstream time sync
acquisition...
[01:41:18 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefOk: (Cm
Multi US Helper) target hwTxId=0
[01:41:18 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::UsTimeRefOk: upstream time
sync acquired for fHwTxId=0

== Beginning initial ranging for Docsis UCID 4 ==


Minimum transmit power is 17 dBmV
Maximum transmit power is 53 dBmV
Stored power level for UCID 4 is 42 dBmV
Using per transmitter stored initial upstream power = 42 dBmV hwTxId = 0 docsis
UCID = 4
RNG-RSP UsChanId=4 Adj: tim=1881 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV):
(4-41.75) )
[01:41:19 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0xc9
RNG-RSP UsChanId=4 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (4-
41.75) )
RNG-RSP UsChanId=4 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (4-
41.75) )
RNG-RSP UsChanId=4 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (4-
41.75) )
RNG-RSP UsChanId=4 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (4-
41.75) )
RNG-RSP UsChanId=4 Adj: tim=0 freq=0 Stat=Success (CmdPwr (UsChanId-dBmV): (4-
41.75) )
[01:41:25 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::FirstRngSuccess:
(CmDocsisCtlThread)
first RNG-RSP w/status==SUCCESS for hwTxId=0 and DOCSIS ucid=4
[01:41:25 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::LaunchEaeBpkm:
(CmDocsisCtlThread) BPKM enabled. starting Early Authentication and Encryption BPKM
key requests. Primary Sid = 201
CM/DocsisCtl> FirstRngRsp success - adjustment was 0
Bandwidth request failure! Status = 0

BcmCmUsChanTimerMuxACT::HandleEvent() @time=6274560 fTimerType=5


(kT4NoStationMaint) hwTxId=0 docs ucid=4
[01:44:34 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::T4NoStationMaintEvent: ERROR - no Station Maint map op error.
hwTxId=0 docs ucid=4
[01:44:34 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::CommonRngErrorHandler: reason=10 (T4NoStationMaintTimeout)
hwTxId=0 docs ucid=4
[01:44:34 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) Purging DS
frequency 747000000 from current scan pass due to pre-registration restart error
[01:44:34 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) reinit MAC #30:
T4NoStationMaintTimeout

[01:44:34 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::Reset:


(CmDocsisCtlThread) DefaultSnmpAgentClass::RestartPendingEvent for Vendor CM
Agent w/ BRCM Factory Support
Logging event: Received Response to Broadcast Maintenance Request, But no Unicast
Maintenance opportunities received - T4 time out;CM-MAC=fc:4a:e9:de:ad:88;CMTS-
MAC=28:52:61:fa:d8:78;CM-QOS=1.1;CM-VER=3.1;
Vendor CM Agent w/ BRCM Factory Support updating ifTableLastChange.
Vendor CM Agent w/ BRCM Factory Support resetting to default state.
Vendor CM Agent w/ BRCM Factory Support destroying users...
Vendor CM Agent w/ BRCM Factory Support destroying notifies...
Vendor CM Agent w/ BRCM Factory Support destroying views...
Allowing DOCS-CABLE-DEVICE-MIB IP filters.
Vendor CM Agent w/ BRCM Factory Support deferring traps.
Received RG Event 0x80000001 State 0x1
eRouter Linux WAN Down
[01:44:34 01/01/1970] [eRouterMsgPipe] eRouterMsgPipe::UpdateIpNetToMediaEntry:
(eRouterMsgPipe) eRouter IP address:0.0.0.0
01:44:34.850 01/01/1970 (CALC) mtaCmStatusInfo() - MTA is Signaled: *NOT-
OPERATIONAL* (Stat=0x1) emtaCurState = 0.
EmtaSnmpAgent::SoftReset
Pausing trap thread
emta factory agentResetting to default state.
emta factory agent destroying users...
emta factory agent destroying notifies...
emta factory agent destroying views...
emta factory agent entering RFC-2576 Coexistence security mode.
emta factory agent entering Basic/Hybrid flow provisioning mode.
Resuming trap thread
Stopping DHCP/ToD/TFTP (client requested)...
[01:44:34 01/01/1970] [CmDocsisIpThread] BcmEcosIpHalIf::RemoveIpv6Address: (IP
Stack1 HalIf) ERROR - Failed to remove IPv6 address fe80::fe4a:e9ff:fede:ad88/64
from the stack!
[01:44:34 01/01/1970] [CmDocsisIpThread] BcmDhcpV6ClientIf::ReleaseAddresses:
(DHCPv6 ClientIf for IP Stack1) ERROR - IA state is initial; there is no address to
release.
BcmDocsis3DsMacEnableMulticastDsidForwarding 0; primary DS = 0
SCQAM DSID filter control = 0x00
OFDM DSID filter control = 0x01
Deleting DOCSIS 1.0 CoS Settings for SID 0xc9
[01:44:35 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows:
(DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along
with associated Classifiers and PHS rules...
[01:44:35 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState:
(CmDocsisCtlThread)
[01:44:35 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Primary SID for usHwChannel 0 to 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 1
Updating US chan 8 data Profile test msg for Sid: 0x0.
Updating US chan 9 data Profile test msg for Sid: 0x0.
CM/DocsisCtl> [01:44:35 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL declared PULSE lost!
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=false
[01:44:36 01/01/1970] [CmDocsisCtlThread] BcmCmMultiDsHelper::PreRegDsChanChange:
target freq hz = 0
reason string = ErrorRecovery
CmInitReason = 16

Starting DS scanning...
[01:44:36 01/01/1970] [CmDocsisCtlThread] BcmCmDownstreamScan::StartScan: Starting
DS scan
Checking for cable cut...

CM/DocsisCtl> Plant power is 15.55

Cable connected

CM/DocsisCtl> Scanning 748.000 MHz SC-QAM (Annex A(Eu.1M))


Scanning 749.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 750.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 751.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 752.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 753.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 754.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 755.000 MHz SC-QAM (Annex A(Eu.1M)) locked SC-QAM
[01:44:39 01/01/1970] [CmDocsisCtlThread] BcmCmDsChan::DsLockOk: (BcmCmDsChan 0)
hwRxId=0 freq=0 dcid=0

******************************************
DOWNSTREAM STATUS
******************************************
HW Channel ID = 0
Phy type: SC-QAM
DS active chan settings:
ds chan id = 0
center freq, Hz = 755000000 Hz
primary capable = false
status event rpt bitmask = 0

CM HW Detected DS Phy Settings:


Center Freq, Hz = 755000000
QAM = Locked
FEC = Locked
Carrier Freq Offset, kHz = 0
Channel Width, Hz = 8000000
Modulation = Qam256
Interleaver = Taps12Incr17
Symbol Rate, sym/sec = 6952000

******************************************

[01:44:39 01/01/1970] [CmDocsisCtlThread]


BcmCmMacDomainSetsState::StartDsMacMddInit:
**********************************************
Waiting for MDDs...
**********************************************

BcmCmDocsisCtlMsgACT::HandleEvent() @time=6279760 event_code=4 (kCmPriDsMddSetsOk)

MDD diplexer band edge not specified.


MDD Plant US Frequency Range = extended.
Requested Spectrum = US:(0 MHz..85 MHz) DS:(0 MHz..0 MHz)
Best Match = 0: US:(5 MHz..85 MHz) DS:(108 MHz..1218 MHz)
Switchable diplexer ECN support disabled. NOT switching diplexer.
[01:44:39 01/01/1970] [CmDocsisCtlThread]
BcmCmMdDsSgDiscState::TrimSgSetWithoutThisDcid:
1 candidate MD-DS-SG remain after TrimSgSetWithoutThisDcid( target_dcid )
for target_dcid=0x1d (29)
[01:44:39 01/01/1970] [CmDocsisCtlThread] BcmCmMdDsSgDiscState::StartMdDsSgDisc:
special case: one and only one MD-DS-SG contains mdd_dcid.
fMdDsSgId=0x1d (29)
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , M-d++a+i-+Ty-eA+dA++e|:
i_L-ca+A++e|A: 1
Chec+ +D_A++e|A
Cha++e+ Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1

MD-DS-SG discovery info:


fCmMdDsSgDiscState = 6 (kMdDsSgDiscDone)
fMdDsSgId = 0x1d (29)
fMdDsSgDiscovered = true

Trimmed Candidate Downstream Service Group Settings List: list size = 1

sgid size member dcid's


---- ---- -------------
29 34 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
27 28 29 30 31 32 159 160

Downstream Active Channel Settings List:

dcid type frequency prim capable rpt enable mod/annex or PLC params
---- -------- --------- ------------ ---------- -----------------------
1 SC-QAM 531000000 y 0x36 256QAM/AnnexA
2 SC-QAM 539000000 y 0x36 256QAM/AnnexA
3 SC-QAM 547000000 y 0x36 256QAM/AnnexA
4 SC-QAM 555000000 y 0x36 256QAM/AnnexA
5 SC-QAM 563000000 y 0x36 256QAM/AnnexA
6 SC-QAM 571000000 y 0x36 256QAM/AnnexA
7 SC-QAM 579000000 y 0x36 256QAM/AnnexA
8 SC-QAM 587000000 y 0x36 256QAM/AnnexA
9 SC-QAM 595000000 y 0x36 256QAM/AnnexA
10 SC-QAM 603000000 y 0x36 256QAM/AnnexA
11 SC-QAM 611000000 y 0x36 256QAM/AnnexA
12 SC-QAM 619000000 y 0x36 256QAM/AnnexA
13 SC-QAM 627000000 y 0x36 256QAM/AnnexA
14 SC-QAM 635000000 y 0x36 256QAM/AnnexA
15 SC-QAM 643000000 y 0x36 256QAM/AnnexA
16 SC-QAM 651000000 y 0x36 256QAM/AnnexA
17 SC-QAM 659000000 y 0x36 256QAM/AnnexA
18 SC-QAM 667000000 y 0x36 256QAM/AnnexA
19 SC-QAM 675000000 y 0x36 256QAM/AnnexA
20 SC-QAM 683000000 y 0x36 256QAM/AnnexA
21 SC-QAM 691000000 y 0x36 256QAM/AnnexA
22 SC-QAM 699000000 y 0x36 256QAM/AnnexA
23 SC-QAM 707000000 y 0x36 256QAM/AnnexA
24 SC-QAM 715000000 y 0x36 256QAM/AnnexA
25 SC-QAM 723000000 y 0x36 256QAM/AnnexA
26 SC-QAM 731000000 y 0x36 256QAM/AnnexA
27 SC-QAM 739000000 y 0x36 256QAM/AnnexA
28 SC-QAM 747000000 y 0x36 256QAM/AnnexA
29 SC-QAM 755000000 y 0x36 256QAM/AnnexA
30 SC-QAM 763000000 y 0x36 256QAM/AnnexA
31 SC-QAM 771000000 y 0x36 256QAM/AnnexA
32 SC-QAM 779000000 y 0x36 256QAM/AnnexA
159 OFDM PLC 897000000 n 0x36 25Khz/5us/0.625us
160 OFDM PLC 361000000 n 0x36 50Khz/0.9375us/0.625us

Trimmed Downstream Ambiguity Resolution Frequency List: list size = 3

531000000-sc_qam 539000000-sc_qam 547000000-sc_qam

visible dcid set = 29


freq with visible dcid set = 755000000

BcmCmDocsisCtlMsgACT::HandleEvent() @time=6280360 event_code=11


(kCmMdDsSgDiscDone)
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=true
[01:44:40 01/01/1970] [CmDocsisCtlThread]
BcmDocsisCmHalIf::SetPrimaryDownstreamChannel: (DOCSIS CableModem HalIf)
Installing primary downstream channel index: 0
SetRatios called with primary downstream channel number = 0
AnnexMode[0] = 1 QAM_Mode[0] = 256
Num/Den = 869/1280
3390 SCDMA/OFDM mode - ChannelNumber = 0 Numerator = 869 Denominator = 1280
CM/DocsisCtl> [01:44:40 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL failed to acquire sync or lost sync!
... TCOFDM - DTR is now locked.... (T2=150ms Sync=14)

Given a 216 MHz TCOFDM clock, the nominal value for the DTR FCW is 0xC22E45067
The DTR FCW is 0xc22e860a - that value is good (5, within 100 ppm)
Kicked off the DPLL
LE Done bit was set
LE Done bit was set
SCQAM DS clock source.
PLL in Leaky mode.
PLL Fn = 6, k1 = 18, k2 = 19
[01:44:40 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context=1 (ErrorRecovery)
[01:44:40 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context is error recovery or startup.
Always use last good upstream target chan id=1
[01:44:40 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper) Locked on the downstream. Waiting for UCDs...
[01:44:40 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefFail: (Cm
Multi US Helper) target hwTxId=0
CM/DocsisCtl> [01:44:42 01/01/1970] [CmDocsisCtlThread]
BcmCmMultiUsHelper::TmUcdRxTimerEvent: (Cm Multi US Helper)
ucd gathering ok.

[01:44:42 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper) state at
entry:

Channel targeting:
Downstream:
fTargetDsFreqHz = 0 (0)
fCurrentDsFreqHz = 0x2d0062c0 (755000000)
fStoredDsFreqHz = 0x29020c00 (688000000)

Upstream:
fDestSingleTxTargetUsChanId = 0x1 (1)
fTargetingContext = 1 (ErrorRecovery)

Startup UCD Selection Info:


low priority candidate ucid list = 4 3 2 1 5 6 8 7
happy home ucid set = 1 2 3 4

Upstream Active Channel Settings:

ucid rpt enable sel prio MAP source dcid's


---- ---------- -------- -----------------
1 0x1c0 0
2 0x1c0 0
3 0x1c0 0
4 0x1c0 0
5 0x1c0 0
6 0x1c0 0
7 0x1c0 0
8 0x1c0 0

BcmCmUsTargetMset (a.k.a. usable UCDs gathered during startup):

us config
phy change ranging scdma
type ucid dcid count tried? enabled?
---- ---- ---- ------ ------- --------
3 1 29 4 n n
3 2 29 4 n n
3 3 29 4 n n
3 4 29 4 n n
3 5 29 4 n n
3 6 29 4 n n
3 7 29 4 n n
3 8 29 4 n n

[01:44:42 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper)
starting docs3 upstream initialization on target ucid=4
with upstream phy type 3 on hardware transmitter index 0

[01:44:42 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::ExecuteTccCmd: hwTxId=0


docs ucid=0
[01:44:42 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0
[01:44:42 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::InstallUsSets: Installing
UCD w/ucid for UCID=4 for CM hardware tx chan 0

[01:44:42 01/01/1970] [CmDocsisCtlThread]


BcmCmUsSetsState::TestAndLaunchUsTimeSync: starting upstream time sync
acquisition...
[01:44:42 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefOk: (Cm
Multi US Helper) target hwTxId=0
[01:44:42 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::UsTimeRefOk: upstream time
sync acquired for fHwTxId=0

== Beginning initial ranging for Docsis UCID 4 ==


Minimum transmit power is 17 dBmV
Maximum transmit power is 53 dBmV
Stored power level for UCID 4 is 42 dBmV
Using per transmitter stored initial upstream power = 42 dBmV hwTxId = 0 docsis
UCID = 4
RNG-RSP UsChanId=4 Adj: tim=1885 freq=31 Stat=Continue (CmdPwr (UsChanId-dBmV):
(4-41.75) )
[01:44:43 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0xc9
RNG-RSP UsChanId=4 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (4-
41.75) )
RNG-RSP UsChanId=4 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (4-
41.75) )
RNG-RSP UsChanId=4 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (4-
41.75) )
RNG-RSP UsChanId=4 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (4-
41.75) )
RNG-RSP UsChanId=4 Adj: tim=0 freq=0 Stat=Success (CmdPwr (UsChanId-dBmV): (4-
41.75) )
[01:44:48 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::FirstRngSuccess:
(CmDocsisCtlThread)
first RNG-RSP w/status==SUCCESS for hwTxId=0 and DOCSIS ucid=4
[01:44:48 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::LaunchEaeBpkm:
(CmDocsisCtlThread) BPKM enabled. starting Early Authentication and Encryption BPKM
key requests. Primary Sid = 201
CM/DocsisCtl> Bandwidth request failure! Status = 0

BcmCmUsChanTimerMuxACT::HandleEvent() @time=6478080 fTimerType=5


(kT4NoStationMaint) hwTxId=0 docs ucid=4
[01:47:58 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::T4NoStationMaintEvent: ERROR - no Station Maint map op error.
hwTxId=0 docs ucid=4
[01:47:58 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::CommonRngErrorHandler: reason=10 (T4NoStationMaintTimeout)
hwTxId=0 docs ucid=4
[01:47:58 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) Purging DS
frequency 755000000 from current scan pass due to pre-registration restart error
[01:47:58 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) reinit MAC #31:
T4NoStationMaintTimeout

[01:47:58 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::Reset:


(CmDocsisCtlThread) DefaultSnmpAgentClass::RestartPendingEvent for Vendor CM
Agent w/ BRCM Factory Support
Logging event: Received Response to Broadcast Maintenance Request, But no Unicast
Maintenance opportunities received - T4 time out;CM-MAC=fc:4a:e9:de:ad:88;CMTS-
MAC=28:52:61:fa:d8:78;CM-QOS=1.1;CM-VER=3.1;
Vendor CM Agent w/ BRCM Factory Support updating ifTableLastChange.
Vendor CM Agent w/ BRCM Factory Support resetting to default state.
Vendor CM Agent w/ BRCM Factory Support destroying users...
Vendor CM Agent w/ BRCM Factory Support destroying notifies...
Vendor CM Agent w/ BRCM Factory Support destroying views...
Allowing DOCS-CABLE-DEVICE-MIB IP filters.
Vendor CM Agent w/ BRCM Factory Support deferring traps.
Received RG Event 0x80000001 State 0x1
eRouter Linux WAN Down
[01:47:58 01/01/1970] [eRouterMsgPipe] eRouterMsgPipe::UpdateIpNetToMediaEntry:
(eRouterMsgPipe) eRouter IP address:0.0.0.0
01:47:58.370 01/01/1970 (CALC) mtaCmStatusInfo() - MTA is Signaled: *NOT-
OPERATIONAL* (Stat=0x1) emtaCurState = 0.
EmtaSnmpAgent::SoftReset
Pausing trap thread
emta factory agentResetting to default state.
emta factory agent destroying users...
emta factory agent destroying notifies...
emta factory agent destroying views...
emta factory agent entering RFC-2576 Coexistence security mode.
emta factory agent entering Basic/Hybrid flow provisioning mode.
Resuming trap thread
Stopping DHCP/ToD/TFTP (client requested)...
[01:47:58 01/01/1970] [CmDocsisIpThread] BcmEcosIpHalIf::RemoveIpv6Address: (IP
Stack1 HalIf) ERROR - Failed to remove IPv6 address fe80::fe4a:e9ff:fede:ad88/64
from the stack!
[01:47:58 01/01/1970] [CmDocsisIpThread] BcmDhcpV6ClientIf::ReleaseAddresses:
(DHCPv6 ClientIf for IP Stack1) ERROR - IA state is initial; there is no address to
release.
BcmDocsis3DsMacEnableMulticastDsidForwarding 0; primary DS = 0
SCQAM DSID filter control = 0x00
OFDM DSID filter control = 0x01
Deleting DOCSIS 1.0 CoS Settings for SID 0xc9
[01:47:58 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows:
(DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along
with associated Classifiers and PHS rules...
[01:47:58 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState:
(CmDocsisCtlThread)
[01:47:58 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Primary SID for usHwChannel 0 to 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 1
Updating US chan 8 data Profile test msg for Sid: 0x0.
Updating US chan 9 data Profile test msg for Sid: 0x0.
CM/DocsisCtl> [01:47:59 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL declared PULSE lost!
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=false
[01:47:59 01/01/1970] [CmDocsisCtlThread] BcmCmMultiDsHelper::PreRegDsChanChange:
target freq hz = 0
reason string = ErrorRecovery
CmInitReason = 16

Starting DS scanning...
[01:47:59 01/01/1970] [CmDocsisCtlThread] BcmCmDownstreamScan::StartScan: Starting
DS scan
Checking for cable cut...

CM/DocsisCtl> Plant power is 15.55

Cable connected

Scanning 756.000 MHz SC-QAM (Annex A(Eu.1M))


CM/DocsisCtl> Scanning 757.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 758.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 759.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 760.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 761.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 762.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 763.000 MHz SC-QAM (Annex A(Eu.1M)) locked SC-QAM
[01:48:02 01/01/1970] [CmDocsisCtlThread] BcmCmDsChan::DsLockOk: (BcmCmDsChan 0)
hwRxId=0 freq=0 dcid=0

******************************************
DOWNSTREAM STATUS
******************************************
HW Channel ID = 0
Phy type: SC-QAM
DS active chan settings:
ds chan id = 0
center freq, Hz = 763000000 Hz
primary capable = false
status event rpt bitmask = 0

CM HW Detected DS Phy Settings:


Center Freq, Hz = 763000000
QAM = Locked
FEC = Locked
Carrier Freq Offset, kHz = 0
Channel Width, Hz = 8000000
Modulation = Qam256
Interleaver = Taps12Incr17
Symbol Rate, sym/sec = 6952000

******************************************

[01:48:02 01/01/1970] [CmDocsisCtlThread]


BcmCmMacDomainSetsState::StartDsMacMddInit:
**********************************************
Waiting for MDDs...
**********************************************

CM/DocsisCtl>
BcmCmDocsisCtlMsgACT::HandleEvent() @time=6483760 event_code=4 (kCmPriDsMddSetsOk)

MDD diplexer band edge not specified.


MDD Plant US Frequency Range = extended.
Requested Spectrum = US:(0 MHz..85 MHz) DS:(0 MHz..0 MHz)
Best Match = 0: US:(5 MHz..85 MHz) DS:(108 MHz..1218 MHz)
Switchable diplexer ECN support disabled. NOT switching diplexer.
[01:48:03 01/01/1970] [CmDocsisCtlThread]
BcmCmMdDsSgDiscState::TrimSgSetWithoutThisDcid:
1 candidate MD-DS-SG remain after TrimSgSetWithoutThisDcid( target_dcid )
for target_dcid=0x1e (30)
[01:48:03 01/01/1970] [CmDocsisCtlThread] BcmCmMdDsSgDiscState::StartMdDsSgDisc:
special case: one and only one MD-DS-SG contains mdd_dcid.
fMdDsSgId=0x1d (29)
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , M-d++a+i-+Ty-eA+dA++e|:
i_L-ca+A++e|A: 1
Chec+ +D_A++e|A
Cha++e+ Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1

MD-DS-SG discovery info:

fCmMdDsSgDiscState = 6 (kMdDsSgDiscDone)
fMdDsSgId = 0x1d (29)
fMdDsSgDiscovered = true

Trimmed Candidate Downstream Service Group Settings List: list size = 1

sgid size member dcid's


---- ---- -------------
29 34 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
27 28 29 30 31 32 159 160

Downstream Active Channel Settings List:

dcid type frequency prim capable rpt enable mod/annex or PLC params
---- -------- --------- ------------ ---------- -----------------------
1 SC-QAM 531000000 y 0x36 256QAM/AnnexA
2 SC-QAM 539000000 y 0x36 256QAM/AnnexA
3 SC-QAM 547000000 y 0x36 256QAM/AnnexA
4 SC-QAM 555000000 y 0x36 256QAM/AnnexA
5 SC-QAM 563000000 y 0x36 256QAM/AnnexA
6 SC-QAM 571000000 y 0x36 256QAM/AnnexA
7 SC-QAM 579000000 y 0x36 256QAM/AnnexA
8 SC-QAM 587000000 y 0x36 256QAM/AnnexA
9 SC-QAM 595000000 y 0x36 256QAM/AnnexA
10 SC-QAM 603000000 y 0x36 256QAM/AnnexA
11 SC-QAM 611000000 y 0x36 256QAM/AnnexA
12 SC-QAM 619000000 y 0x36 256QAM/AnnexA
13 SC-QAM 627000000 y 0x36 256QAM/AnnexA
14 SC-QAM 635000000 y 0x36 256QAM/AnnexA
15 SC-QAM 643000000 y 0x36 256QAM/AnnexA
16 SC-QAM 651000000 y 0x36 256QAM/AnnexA
17 SC-QAM 659000000 y 0x36 256QAM/AnnexA
18 SC-QAM 667000000 y 0x36 256QAM/AnnexA
19 SC-QAM 675000000 y 0x36 256QAM/AnnexA
20 SC-QAM 683000000 y 0x36 256QAM/AnnexA
21 SC-QAM 691000000 y 0x36 256QAM/AnnexA
22 SC-QAM 699000000 y 0x36 256QAM/AnnexA
23 SC-QAM 707000000 y 0x36 256QAM/AnnexA
24 SC-QAM 715000000 y 0x36 256QAM/AnnexA
25 SC-QAM 723000000 y 0x36 256QAM/AnnexA
26 SC-QAM 731000000 y 0x36 256QAM/AnnexA
27 SC-QAM 739000000 y 0x36 256QAM/AnnexA
28 SC-QAM 747000000 y 0x36 256QAM/AnnexA
29 SC-QAM 755000000 y 0x36 256QAM/AnnexA
30 SC-QAM 763000000 y 0x36 256QAM/AnnexA
31 SC-QAM 771000000 y 0x36 256QAM/AnnexA
32 SC-QAM 779000000 y 0x36 256QAM/AnnexA
159 OFDM PLC 897000000 n 0x36 25Khz/5us/0.625us
160 OFDM PLC 361000000 n 0x36 50Khz/0.9375us/0.625us

Trimmed Downstream Ambiguity Resolution Frequency List: list size = 3

531000000-sc_qam 539000000-sc_qam 547000000-sc_qam

visible dcid set = 30

freq with visible dcid set = 763000000

BcmCmDocsisCtlMsgACT::HandleEvent() @time=6484360 event_code=11


(kCmMdDsSgDiscDone)
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=true
[01:48:04 01/01/1970] [CmDocsisCtlThread]
BcmDocsisCmHalIf::SetPrimaryDownstreamChannel: (DOCSIS CableModem HalIf)
Installing primary downstream channel index: 0
SetRatios called with primary downstream channel number = 0
AnnexMode[0] = 1 QAM_Mode[0] = 256
Num/Den = 869/1280
3390 SCDMA/OFDM mode - ChannelNumber = 0 Numerator = 869 Denominator = 1280
CM/DocsisCtl> [01:48:04 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL failed to acquire sync or lost sync!
... TCOFDM - DTR is now locked.... (T2=150ms Sync=14)

Given a 216 MHz TCOFDM clock, the nominal value for the DTR FCW is 0xC22E45067
The DTR FCW is 0xc22e9227 - that value is good (6, within 100 ppm)
Kicked off the DPLL
LE Done bit was set
LE Done bit was set
SCQAM DS clock source.
PLL in Leaky mode.
PLL Fn = 6, k1 = 18, k2 = 19
[01:48:04 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context=1 (ErrorRecovery)
[01:48:04 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context is error recovery or startup.
Always use last good upstream target chan id=1
[01:48:04 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper) Locked on the downstream. Waiting for UCDs...
[01:48:04 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefFail: (Cm
Multi US Helper) target hwTxId=0
CM/DocsisCtl> [01:48:06 01/01/1970] [CmDocsisCtlThread]
BcmCmMultiUsHelper::TmUcdRxTimerEvent: (Cm Multi US Helper)
ucd gathering ok.

[01:48:06 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper) state at
entry:

Channel targeting:
Downstream:
fTargetDsFreqHz = 0 (0)
fCurrentDsFreqHz = 0x2d7a74c0 (763000000)
fStoredDsFreqHz = 0x29020c00 (688000000)

Upstream:
fDestSingleTxTargetUsChanId = 0x1 (1)
fTargetingContext = 1 (ErrorRecovery)

Startup UCD Selection Info:

low priority candidate ucid list = 3 1 4 2 7 5 6 8


happy home ucid set = 1 2 3 4

Upstream Active Channel Settings:

ucid rpt enable sel prio MAP source dcid's


---- ---------- -------- -----------------
1 0x1c0 0
2 0x1c0 0
3 0x1c0 0
4 0x1c0 0
5 0x1c0 0
6 0x1c0 0
7 0x1c0 0
8 0x1c0 0

BcmCmUsTargetMset (a.k.a. usable UCDs gathered during startup):

us config
phy change ranging scdma
type ucid dcid count tried? enabled?
---- ---- ---- ------ ------- --------
3 1 30 4 n n
3 2 30 4 n n
3 3 30 4 n n
3 4 30 4 n n
3 5 30 4 n n
3 6 30 4 n n
3 7 30 4 n n
3 8 30 4 n n

[01:48:06 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper)
starting docs3 upstream initialization on target ucid=3
with upstream phy type 3 on hardware transmitter index 0

[01:48:06 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::ExecuteTccCmd: hwTxId=0


docs ucid=0
[01:48:06 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0
[01:48:06 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::InstallUsSets: Installing
UCD w/ucid for UCID=3 for CM hardware tx chan 0

[01:48:06 01/01/1970] [CmDocsisCtlThread]


BcmCmUsSetsState::TestAndLaunchUsTimeSync: starting upstream time sync
acquisition...
[01:48:06 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefOk: (Cm
Multi US Helper) target hwTxId=0
[01:48:06 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::UsTimeRefOk: upstream time
sync acquired for fHwTxId=0

== Beginning initial ranging for Docsis UCID 3 ==


Minimum transmit power is 17 dBmV
Maximum transmit power is 53 dBmV
Stored power level for UCID 3 is 38 dBmV
Using per transmitter stored initial upstream power = 38 dBmV hwTxId = 0 docsis
UCID = 3
RNG-RSP UsChanId=3 Adj: tim=1895 freq=29 Stat=Continue (CmdPwr (UsChanId-dBmV):
(3-41.25) )
[01:48:07 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0xc9
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (3-
41.25) )
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (3-
41.25) )
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (3-
41.25) )
FirstRngRsp success - adjustment was 0
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (3-
41.25) )
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Success (CmdPwr (UsChanId-dBmV): (3-
41.25) )
[01:48:12 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::FirstRngSuccess:
(CmDocsisCtlThread)
first RNG-RSP w/status==SUCCESS for hwTxId=0 and DOCSIS ucid=3
[01:48:12 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::LaunchEaeBpkm:
(CmDocsisCtlThread) BPKM enabled. starting Early Authentication and Encryption BPKM
key requests. Primary Sid = 201
CM/DocsisCtl> FirstRngRsp success - adjustment was 0
FirstRngRsp success - adjustment was 0
Bandwidth request failure! Status = 0
BcmCmUsChanTimerMuxACT::HandleEvent() @time=6553220 fTimerType=4 (kT3NoRngRsp)
hwTxId=0 docs ucid=3
Logging event: Started Unicast Maintenance Ranging - No Response received - T3
time-out;CM-MAC=fc:4a:e9:de:ad:88;CMTS-MAC=28:52:61:fa:d8:78;CM-QOS=1.1;CM-VER=3.1;
CM/DocsisCtl> Bandwidth request failure! Status = 0

BcmCmUsChanTimerMuxACT::HandleEvent() @time=6555580 fTimerType=4 (kT3NoRngRsp)


hwTxId=0 docs ucid=3
Logging event: Started Unicast Maintenance Ranging - No Response received - T3
time-out;CM-MAC=fc:4a:e9:de:ad:88;CMTS-MAC=28:52:61:fa:d8:78;CM-QOS=1.1;CM-VER=3.1;
CM/DocsisCtl>

BcmCmUsChanTimerMuxACT::HandleEvent() @time=6557580 fTimerType=4 (kT3NoRngRsp)


hwTxId=0 docs ucid=3
Logging event: Started Unicast Maintenance Ranging - No Response received - T3
time-out;CM-MAC=fc:4a:e9:de:ad:88;CMTS-MAC=28:52:61:fa:d8:78;CM-QOS=1.1;CM-VER=3.1;
CM/DocsisCtl>

BcmCmUsChanTimerMuxACT::HandleEvent() @time=6559580 fTimerType=4 (kT3NoRngRsp)


hwTxId=0 docs ucid=3
Logging event: Started Unicast Maintenance Ranging - No Response received - T3
time-out;CM-MAC=fc:4a:e9:de:ad:88;CMTS-MAC=28:52:61:fa:d8:78;CM-QOS=1.1;CM-VER=3.1;
CM/DocsisCtl>

BcmCmUsChanTimerMuxACT::HandleEvent() @time=6561570 fTimerType=4 (kT3NoRngRsp)


hwTxId=0 docs ucid=3
Logging event: Started Unicast Maintenance Ranging - No Response received - T3
time-out;CM-MAC=fc:4a:e9:de:ad:88;CMTS-MAC=28:52:61:fa:d8:78;CM-QOS=1.1;CM-VER=3.1;
CM/DocsisCtl> Bandwidth request failure! Status = 0
FirstRngRsp success - adjustment was -5
Bandwidth request failure! Status = 0
FirstRngRsp success - adjustment was 0
Bandwidth request failure! Status = 0
FirstRngRsp success - adjustment was 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0

BcmCmUsChanTimerMuxACT::HandleEvent() @time=6607480 fTimerType=4 (kT3NoRngRsp)


hwTxId=0 docs ucid=3
Logging event: Started Unicast Maintenance Ranging - No Response received - T3
time-out;CM-MAC=fc:4a:e9:de:ad:88;CMTS-MAC=28:52:61:fa:d8:78;CM-QOS=1.1;CM-VER=3.1;
CM/DocsisCtl>

BcmCmUsChanTimerMuxACT::HandleEvent() @time=6613230 fTimerType=4 (kT3NoRngRsp)


hwTxId=0 docs ucid=3
Logging event: Started Unicast Maintenance Ranging - No Response received - T3
time-out;CM-MAC=fc:4a:e9:de:ad:88;CMTS-MAC=28:52:61:fa:d8:78;CM-QOS=1.1;CM-VER=3.1;
CM/DocsisCtl>

BcmCmUsChanTimerMuxACT::HandleEvent() @time=6615590 fTimerType=4 (kT3NoRngRsp)


hwTxId=0 docs ucid=3
Logging event: Started Unicast Maintenance Ranging - No Response received - T3
time-out;CM-MAC=fc:4a:e9:de:ad:88;CMTS-MAC=28:52:61:fa:d8:78;CM-QOS=1.1;CM-VER=3.1;
CM/DocsisCtl> Telling application we lost lock on QAM primary channel 0
[01:50:16 01/01/1970] [CmDocsisCtlThread] BcmCmMultiDsHelper::DsLockFailStartup:
hwRxId=0 freq=763000000
lock failure for active primary ds chan during startup. restart error!
PnmTestDriveACT - event code 2 Setting PnmCmCtlStatus to TempReject
[01:50:16 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) Purging DS
frequency 763000000 from current scan pass due to pre-registration restart error
[01:50:16 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) reinit MAC #32:
DsLockFail

[01:50:16 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::Reset:


(CmDocsisCtlThread) DefaultSnmpAgentClass::RestartPendingEvent for Vendor CM
Agent w/ BRCM Factory Support
Vendor CM Agent w/ BRCM Factory Support updating ifTableLastChange.
Vendor CM Agent w/ BRCM Factory Support resetting to default state.
Vendor CM Agent w/ BRCM Factory Support destroying users...
Vendor CM Agent w/ BRCM Factory Support destroying notifies...
Vendor CM Agent w/ BRCM Factory Support destroying views...
Allowing DOCS-CABLE-DEVICE-MIB IP filters.
Vendor CM Agent w/ BRCM Factory Support deferring traps.
CM/DocsisCtl> Received RG Event 0x80000001 State 0x1
eRouter Linux WAN Down
[01:50:16 01/01/1970] [eRouterMsgPipe] eRouterMsgPipe::UpdateIpNetToMediaEntry:
(eRouterMsgPipe) eRouter IP address:0.0.0.0
01:50:16.800 01/01/1970 (CALC) mtaCmStatusInfo() - MTA is Signaled: *NOT-
OPERATIONAL* (Stat=0x1) emtaCurState = 0.
EmtaSnmpAgent::SoftReset
Pausing trap thread
emta factory agentResetting to default state.
emta factory agent destroying users...
emta factory agent destroying notifies...
emta factory agent destroying views...
emta factory agent entering RFC-2576 Coexistence security mode.
emta factory agent entering Basic/Hybrid flow provisioning mode.
Resuming trap thread
Stopping DHCP/ToD/TFTP (client requested)...
[01:50:16 01/01/1970] [CmDocsisIpThread] BcmEcosIpHalIf::RemoveIpv6Address: (IP
Stack1 HalIf) ERROR - Failed to remove IPv6 address fe80::fe4a:e9ff:fede:ad88/64
from the stack!
[01:50:16 01/01/1970] [CmDocsisIpThread] BcmDhcpV6ClientIf::ReleaseAddresses:
(DHCPv6 ClientIf for IP Stack1) ERROR - IA state is initial; there is no address to
release.
BcmDocsis3DsMacEnableMulticastDsidForwarding 0; primary DS = 0
SCQAM DSID filter control = 0x00
OFDM DSID filter control = 0x01
Deleting DOCSIS 1.0 CoS Settings for SID 0xc9
[01:50:17 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows:
(DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along
with associated Classifiers and PHS rules...
[01:50:17 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState:
(CmDocsisCtlThread)
[01:50:17 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Primary SID for usHwChannel 0 to 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 1
Updating US chan 8 data Profile test msg for Sid: 0x0.
Updating US chan 9 data Profile test msg for Sid: 0x0.
CM/DocsisCtl> BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=false
[01:50:18 01/01/1970] [CmDocsisCtlThread] BcmCmMultiDsHelper::PreRegDsChanChange:
target freq hz = 0
reason string = ErrorRecovery
CmInitReason = 16

Starting DS scanning...
[01:50:18 01/01/1970] [CmDocsisCtlThread] BcmCmDownstreamScan::StartScan: Starting
DS scan
Scanning 764.000 MHz SC-QAM (Annex A(Eu.1M))
CM/DocsisCtl> Scanning 765.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 766.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 767.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 768.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 769.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 770.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 771.000 MHz SC-QAM (Annex A(Eu.1M)) locked SC-QAM
[01:50:20 01/01/1970] [CmDocsisCtlThread] BcmCmDsChan::DsLockOk: (BcmCmDsChan 0)
hwRxId=0 freq=0 dcid=0

******************************************
DOWNSTREAM STATUS
******************************************
HW Channel ID = 0
Phy type: SC-QAM
DS active chan settings:
ds chan id = 0
center freq, Hz = 771000000 Hz
primary capable = false
status event rpt bitmask = 0

CM HW Detected DS Phy Settings:


Center Freq, Hz = 771000000
QAM = Locked
FEC = Locked
Carrier Freq Offset, kHz = 0
Channel Width, Hz = 8000000
Modulation = Qam256
Interleaver = Taps12Incr17
Symbol Rate, sym/sec = 6952000

******************************************

[01:50:20 01/01/1970] [CmDocsisCtlThread]


BcmCmMacDomainSetsState::StartDsMacMddInit:
**********************************************
Waiting for MDDs...
**********************************************

CM/DocsisCtl>
BcmCmDocsisCtlMsgACT::HandleEvent() @time=6621760 event_code=4 (kCmPriDsMddSetsOk)

MDD diplexer band edge not specified.


MDD Plant US Frequency Range = extended.
Requested Spectrum = US:(0 MHz..85 MHz) DS:(0 MHz..0 MHz)
Best Match = 0: US:(5 MHz..85 MHz) DS:(108 MHz..1218 MHz)
Switchable diplexer ECN support disabled. NOT switching diplexer.
[01:50:21 01/01/1970] [CmDocsisCtlThread]
BcmCmMdDsSgDiscState::TrimSgSetWithoutThisDcid:
1 candidate MD-DS-SG remain after TrimSgSetWithoutThisDcid( target_dcid )
for target_dcid=0x1f (31)
[01:50:21 01/01/1970] [CmDocsisCtlThread] BcmCmMdDsSgDiscState::StartMdDsSgDisc:
special case: one and only one MD-DS-SG contains mdd_dcid.
fMdDsSgId=0x1d (29)
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , M-d++a+i-+Ty-eA+dA++e|:
i_L-ca+A++e|A: 1
Chec+ +D_A++e|A
Cha++e+ Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1

MD-DS-SG discovery info:

fCmMdDsSgDiscState = 6 (kMdDsSgDiscDone)
fMdDsSgId = 0x1d (29)
fMdDsSgDiscovered = true

Trimmed Candidate Downstream Service Group Settings List: list size = 1

sgid size member dcid's


---- ---- -------------
29 34 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
27 28 29 30 31 32 159 160

Downstream Active Channel Settings List:

dcid type frequency prim capable rpt enable mod/annex or PLC params
---- -------- --------- ------------ ---------- -----------------------
1 SC-QAM 531000000 y 0x36 256QAM/AnnexA
2 SC-QAM 539000000 y 0x36 256QAM/AnnexA
3 SC-QAM 547000000 y 0x36 256QAM/AnnexA
4 SC-QAM 555000000 y 0x36 256QAM/AnnexA
5 SC-QAM 563000000 y 0x36 256QAM/AnnexA
6 SC-QAM 571000000 y 0x36 256QAM/AnnexA
7 SC-QAM 579000000 y 0x36 256QAM/AnnexA
8 SC-QAM 587000000 y 0x36 256QAM/AnnexA
9 SC-QAM 595000000 y 0x36 256QAM/AnnexA
10 SC-QAM 603000000 y 0x36 256QAM/AnnexA
11 SC-QAM 611000000 y 0x36 256QAM/AnnexA
12 SC-QAM 619000000 y 0x36 256QAM/AnnexA
13 SC-QAM 627000000 y 0x36 256QAM/AnnexA
14 SC-QAM 635000000 y 0x36 256QAM/AnnexA
15 SC-QAM 643000000 y 0x36 256QAM/AnnexA
16 SC-QAM 651000000 y 0x36 256QAM/AnnexA
17 SC-QAM 659000000 y 0x36 256QAM/AnnexA
18 SC-QAM 667000000 y 0x36 256QAM/AnnexA
19 SC-QAM 675000000 y 0x36 256QAM/AnnexA
20 SC-QAM 683000000 y 0x36 256QAM/AnnexA
21 SC-QAM 691000000 y 0x36 256QAM/AnnexA
22 SC-QAM 699000000 y 0x36 256QAM/AnnexA
23 SC-QAM 707000000 y 0x36 256QAM/AnnexA
24 SC-QAM 715000000 y 0x36 256QAM/AnnexA
25 SC-QAM 723000000 y 0x36 256QAM/AnnexA
26 SC-QAM 731000000 y 0x36 256QAM/AnnexA
27 SC-QAM 739000000 y 0x36 256QAM/AnnexA
28 SC-QAM 747000000 y 0x36 256QAM/AnnexA
29 SC-QAM 755000000 y 0x36 256QAM/AnnexA
30 SC-QAM 763000000 y 0x36 256QAM/AnnexA
31 SC-QAM 771000000 y 0x36 256QAM/AnnexA
32 SC-QAM 779000000 y 0x36 256QAM/AnnexA
159 OFDM PLC 897000000 n 0x36 25Khz/5us/0.625us
160 OFDM PLC 361000000 n 0x36 50Khz/0.9375us/0.625us

Trimmed Downstream Ambiguity Resolution Frequency List: list size = 3

531000000-sc_qam 539000000-sc_qam 547000000-sc_qam

visible dcid set = 31

freq with visible dcid set = 771000000

BcmCmDocsisCtlMsgACT::HandleEvent() @time=6622360 event_code=11


(kCmMdDsSgDiscDone)
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=true
[01:50:22 01/01/1970] [CmDocsisCtlThread]
BcmDocsisCmHalIf::SetPrimaryDownstreamChannel: (DOCSIS CableModem HalIf)
Installing primary downstream channel index: 0
SetRatios called with primary downstream channel number = 0
AnnexMode[0] = 1 QAM_Mode[0] = 256
Num/Den = 869/1280
3390 SCDMA/OFDM mode - ChannelNumber = 0 Numerator = 869 Denominator = 1280
CM/DocsisCtl> ... TCOFDM - DTR is now locked.... (T2=150ms Sync=14)

Given a 216 MHz TCOFDM clock, the nominal value for the DTR FCW is 0xC22E45067
The DTR FCW is 0xc22e98d7 - that value is good (6, within 100 ppm)
Kicked off the DPLL
LE Done bit was set
LE Done bit was set
SCQAM DS clock source.
PLL in Leaky mode.
PLL Fn = 6, k1 = 18, k2 = 19
[01:50:22 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context=1 (ErrorRecovery)
[01:50:22 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context is error recovery or startup.
Always use last good upstream target chan id=1
[01:50:22 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper) Locked on the downstream. Waiting for UCDs...
CM/DocsisCtl> [01:50:24 01/01/1970] [CmDocsisCtlThread]
BcmCmMultiUsHelper::TmUcdRxTimerEvent: (Cm Multi US Helper)
ucd gathering ok.

[01:50:24 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper) state at
entry:

Channel targeting:
Downstream:
fTargetDsFreqHz = 0 (0)
fCurrentDsFreqHz = 0x2df486c0 (771000000)
fStoredDsFreqHz = 0x29020c00 (688000000)

Upstream:
fDestSingleTxTargetUsChanId = 0x1 (1)
fTargetingContext = 1 (ErrorRecovery)

Startup UCD Selection Info:

low priority candidate ucid list = 2 4 1 3 5 7 6 8


happy home ucid set = 1 2 3 4

Upstream Active Channel Settings:

ucid rpt enable sel prio MAP source dcid's


---- ---------- -------- -----------------
1 0x1c0 0
2 0x1c0 0
3 0x1c0 0
4 0x1c0 0
5 0x1c0 0
6 0x1c0 0
7 0x1c0 0
8 0x1c0 0

BcmCmUsTargetMset (a.k.a. usable UCDs gathered during startup):

us config
phy change ranging scdma
type ucid dcid count tried? enabled?
---- ---- ---- ------ ------- --------
3 1 31 4 n n
3 2 31 4 n n
3 3 31 4 n n
3 4 31 4 n n
3 5 31 4 n n
3 6 31 4 n n
3 7 31 4 n n
3 8 31 4 n n

[01:50:24 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper)
starting docs3 upstream initialization on target ucid=2
with upstream phy type 3 on hardware transmitter index 0

[01:50:24 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::ExecuteTccCmd: hwTxId=0


docs ucid=0
[01:50:24 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0
[01:50:24 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::InstallUsSets: Installing
UCD w/ucid for UCID=2 for CM hardware tx chan 0

[01:50:24 01/01/1970] [CmDocsisCtlThread]


BcmCmUsSetsState::TestAndLaunchUsTimeSync: starting upstream time sync
acquisition...
[01:50:24 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefOk: (Cm
Multi US Helper) target hwTxId=0
[01:50:24 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::UsTimeRefOk: upstream time
sync acquired for fHwTxId=0

== Beginning initial ranging for Docsis UCID 2 ==


Minimum transmit power is 17 dBmV
Maximum transmit power is 53 dBmV
Stored power level for UCID 2 is 38 dBmV
Using per transmitter stored initial upstream power = 38 dBmV hwTxId = 0 docsis
UCID = 2
RNG-RSP UsChanId=2 Adj: tim=1981 freq=46 Stat=Continue (CmdPwr (UsChanId-dBmV):
(2-40.50) )
FirstRngRsp failure - adjustment was 1981
[01:50:25 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0xc9
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (2-
41.00) )
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (2-
41.00) )
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (2-
41.00) )
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (2-
41.00) )
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Success (CmdPwr (UsChanId-dBmV): (2-
41.00) )
[01:50:30 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::FirstRngSuccess:
(CmDocsisCtlThread)
first RNG-RSP w/status==SUCCESS for hwTxId=0 and DOCSIS ucid=2
[01:50:30 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::LaunchEaeBpkm:
(CmDocsisCtlThread) BPKM enabled. starting Early Authentication and Encryption BPKM
key requests. Primary Sid = 201
CM/DocsisCtl> Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0

BcmCmUsChanTimerMuxACT::HandleEvent() @time=6820100 fTimerType=5


(kT4NoStationMaint) hwTxId=0 docs ucid=2
[01:53:40 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::T4NoStationMaintEvent: ERROR - no Station Maint map op error.
hwTxId=0 docs ucid=2
[01:53:40 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::CommonRngErrorHandler: reason=10 (T4NoStationMaintTimeout)
hwTxId=0 docs ucid=2
[01:53:40 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) Purging DS
frequency 771000000 from current scan pass due to pre-registration restart error
[01:53:40 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) reinit MAC #33:
T4NoStationMaintTimeout

[01:53:40 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::Reset:


(CmDocsisCtlThread) DefaultSnmpAgentClass::RestartPendingEvent for Vendor CM
Agent w/ BRCM Factory Support
Logging event: Received Response to Broadcast Maintenance Request, But no Unicast
Maintenance opportunities received - T4 time out;CM-MAC=fc:4a:e9:de:ad:88;CMTS-
MAC=28:52:61:fa:d8:78;CM-QOS=1.1;CM-VER=3.1;
Vendor CM Agent w/ BRCM Factory Support updating ifTableLastChange.
Vendor CM Agent w/ BRCM Factory Support resetting to default state.
Vendor CM Agent w/ BRCM Factory Support destroying users...
Vendor CM Agent w/ BRCM Factory Support destroying notifies...
Vendor CM Agent w/ BRCM Factory Support destroying views...
Allowing DOCS-CABLE-DEVICE-MIB IP filters.
Vendor CM Agent w/ BRCM Factory Support deferring traps.
Received RG Event 0x80000001 State 0x1
eRouter Linux WAN Down
[01:53:40 01/01/1970] [eRouterMsgPipe] eRouterMsgPipe::UpdateIpNetToMediaEntry:
(eRouterMsgPipe) eRouter IP address:0.0.0.0
01:53:40.390 01/01/1970 (CALC) mtaCmStatusInfo() - MTA is Signaled: *NOT-
OPERATIONAL* (Stat=0x1) emtaCurState = 0.
EmtaSnmpAgent::SoftReset
Pausing trap thread
emta factory agentResetting to default state.
emta factory agent destroying users...
emta factory agent destroying notifies...
emta factory agent destroying views...
emta factory agent entering RFC-2576 Coexistence security mode.
emta factory agent entering Basic/Hybrid flow provisioning mode.
Resuming trap thread
Stopping DHCP/ToD/TFTP (client requested)...
[01:53:40 01/01/1970] [CmDocsisIpThread] BcmEcosIpHalIf::RemoveIpv6Address: (IP
Stack1 HalIf) ERROR - Failed to remove IPv6 address fe80::fe4a:e9ff:fede:ad88/64
from the stack!
[01:53:40 01/01/1970] [CmDocsisIpThread] BcmDhcpV6ClientIf::ReleaseAddresses:
(DHCPv6 ClientIf for IP Stack1) ERROR - IA state is initial; there is no address to
release.
BcmDocsis3DsMacEnableMulticastDsidForwarding 0; primary DS = 0
SCQAM DSID filter control = 0x00
OFDM DSID filter control = 0x01
Deleting DOCSIS 1.0 CoS Settings for SID 0xc9
[01:53:40 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows:
(DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along
with associated Classifiers and PHS rules...
[01:53:40 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState:
(CmDocsisCtlThread)
[01:53:40 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Primary SID for usHwChannel 0 to 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 1
Updating US chan 8 data Profile test msg for Sid: 0x0.
Updating US chan 9 data Profile test msg for Sid: 0x0.
CM/DocsisCtl> [01:53:41 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL declared PULSE lost!
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=false
[01:53:41 01/01/1970] [CmDocsisCtlThread] BcmCmMultiDsHelper::PreRegDsChanChange:
target freq hz = 0
reason string = ErrorRecovery
CmInitReason = 16

Starting DS scanning...
[01:53:41 01/01/1970] [CmDocsisCtlThread] BcmCmDownstreamScan::StartScan: Starting
DS scan
Checking for cable cut...

CM/DocsisCtl> Plant power is 15.55

Cable connected

CM/DocsisCtl> Scanning 772.000 MHz SC-QAM (Annex A(Eu.1M))


Scanning 773.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 774.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 775.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 776.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 777.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 778.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 779.000 MHz SC-QAM (Annex A(Eu.1M)) locked SC-QAM
[01:53:44 01/01/1970] [CmDocsisCtlThread] BcmCmDsChan::DsLockOk: (BcmCmDsChan 0)
hwRxId=0 freq=0 dcid=0

******************************************
DOWNSTREAM STATUS
******************************************
HW Channel ID = 0
Phy type: SC-QAM
DS active chan settings:
ds chan id = 0
center freq, Hz = 779000000 Hz
primary capable = false
status event rpt bitmask = 0

CM HW Detected DS Phy Settings:


Center Freq, Hz = 779000000
QAM = Locked
FEC = Locked
Carrier Freq Offset, kHz = 0
Channel Width, Hz = 8000000
Modulation = Qam256
Interleaver = Taps12Incr17
Symbol Rate, sym/sec = 6952000

******************************************

[01:53:44 01/01/1970] [CmDocsisCtlThread]


BcmCmMacDomainSetsState::StartDsMacMddInit:
**********************************************
Waiting for MDDs...
**********************************************

CM/DocsisCtl>
BcmCmDocsisCtlMsgACT::HandleEvent() @time=6825760 event_code=4 (kCmPriDsMddSetsOk)

MDD diplexer band edge not specified.


MDD Plant US Frequency Range = extended.
Requested Spectrum = US:(0 MHz..85 MHz) DS:(0 MHz..0 MHz)
Best Match = 0: US:(5 MHz..85 MHz) DS:(108 MHz..1218 MHz)
Switchable diplexer ECN support disabled. NOT switching diplexer.
[01:53:45 01/01/1970] [CmDocsisCtlThread]
BcmCmMdDsSgDiscState::TrimSgSetWithoutThisDcid:
1 candidate MD-DS-SG remain after TrimSgSetWithoutThisDcid( target_dcid )
for target_dcid=0x20 (32)
[01:53:45 01/01/1970] [CmDocsisCtlThread] BcmCmMdDsSgDiscState::StartMdDsSgDisc:
special case: one and only one MD-DS-SG contains mdd_dcid.
fMdDsSgId=0x1d (29)
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , M-d++a+i-+Ty-eA+dA++e|:
i_L-ca+A++e|A: 1
Chec+ +D_A++e|A
Cha++e+ Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1

MD-DS-SG discovery info:

fCmMdDsSgDiscState = 6 (kMdDsSgDiscDone)
fMdDsSgId = 0x1d (29)
fMdDsSgDiscovered = true

Trimmed Candidate Downstream Service Group Settings List: list size = 1

sgid size member dcid's


---- ---- -------------
29 34 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
27 28 29 30 31 32 159 160

Downstream Active Channel Settings List:

dcid type frequency prim capable rpt enable mod/annex or PLC params
---- -------- --------- ------------ ---------- -----------------------
1 SC-QAM 531000000 y 0x36 256QAM/AnnexA
2 SC-QAM 539000000 y 0x36 256QAM/AnnexA
3 SC-QAM 547000000 y 0x36 256QAM/AnnexA
4 SC-QAM 555000000 y 0x36 256QAM/AnnexA
5 SC-QAM 563000000 y 0x36 256QAM/AnnexA
6 SC-QAM 571000000 y 0x36 256QAM/AnnexA
7 SC-QAM 579000000 y 0x36 256QAM/AnnexA
8 SC-QAM 587000000 y 0x36 256QAM/AnnexA
9 SC-QAM 595000000 y 0x36 256QAM/AnnexA
10 SC-QAM 603000000 y 0x36 256QAM/AnnexA
11 SC-QAM 611000000 y 0x36 256QAM/AnnexA
12 SC-QAM 619000000 y 0x36 256QAM/AnnexA
13 SC-QAM 627000000 y 0x36 256QAM/AnnexA
14 SC-QAM 635000000 y 0x36 256QAM/AnnexA
15 SC-QAM 643000000 y 0x36 256QAM/AnnexA
16 SC-QAM 651000000 y 0x36 256QAM/AnnexA
17 SC-QAM 659000000 y 0x36 256QAM/AnnexA
18 SC-QAM 667000000 y 0x36 256QAM/AnnexA
19 SC-QAM 675000000 y 0x36 256QAM/AnnexA
20 SC-QAM 683000000 y 0x36 256QAM/AnnexA
21 SC-QAM 691000000 y 0x36 256QAM/AnnexA
22 SC-QAM 699000000 y 0x36 256QAM/AnnexA
23 SC-QAM 707000000 y 0x36 256QAM/AnnexA
24 SC-QAM 715000000 y 0x36 256QAM/AnnexA
25 SC-QAM 723000000 y 0x36 256QAM/AnnexA
26 SC-QAM 731000000 y 0x36 256QAM/AnnexA
27 SC-QAM 739000000 y 0x36 256QAM/AnnexA
28 SC-QAM 747000000 y 0x36 256QAM/AnnexA
29 SC-QAM 755000000 y 0x36 256QAM/AnnexA
30 SC-QAM 763000000 y 0x36 256QAM/AnnexA
31 SC-QAM 771000000 y 0x36 256QAM/AnnexA
32 SC-QAM 779000000 y 0x36 256QAM/AnnexA
159 OFDM PLC 897000000 n 0x36 25Khz/5us/0.625us
160 OFDM PLC 361000000 n 0x36 50Khz/0.9375us/0.625us

Trimmed Downstream Ambiguity Resolution Frequency List: list size = 3

531000000-sc_qam 539000000-sc_qam 547000000-sc_qam

visible dcid set = 32

freq with visible dcid set = 779000000

BcmCmDocsisCtlMsgACT::HandleEvent() @time=6826360 event_code=11


(kCmMdDsSgDiscDone)
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=true
[01:53:46 01/01/1970] [CmDocsisCtlThread]
BcmDocsisCmHalIf::SetPrimaryDownstreamChannel: (DOCSIS CableModem HalIf)
Installing primary downstream channel index: 0
SetRatios called with primary downstream channel number = 0
AnnexMode[0] = 1 QAM_Mode[0] = 256
Num/Den = 869/1280
3390 SCDMA/OFDM mode - ChannelNumber = 0 Numerator = 869 Denominator = 1280
CM/DocsisCtl> [01:53:46 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL failed to acquire sync or lost sync!
... TCOFDM - DTR is now locked.... (T2=150ms Sync=14)

Given a 216 MHz TCOFDM clock, the nominal value for the DTR FCW is 0xC22E45067
The DTR FCW is 0xc22e91a5 - that value is good (6, within 100 ppm)
Kicked off the DPLL
LE Done bit was set
LE Done bit was set
SCQAM DS clock source.
PLL in Leaky mode.
PLL Fn = 6, k1 = 18, k2 = 19
[01:53:46 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context=1 (ErrorRecovery)
[01:53:46 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context is error recovery or startup.
Always use last good upstream target chan id=1
[01:53:46 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper) Locked on the downstream. Waiting for UCDs...
[01:53:46 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefFail: (Cm
Multi US Helper) target hwTxId=0
CM/DocsisCtl> [01:53:48 01/01/1970] [CmDocsisCtlThread]
BcmCmMultiUsHelper::TmUcdRxTimerEvent: (Cm Multi US Helper)
ucd gathering ok.

[01:53:48 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper) state at
entry:

Channel targeting:
Downstream:
fTargetDsFreqHz = 0 (0)
fCurrentDsFreqHz = 0x2e6e98c0 (779000000)
fStoredDsFreqHz = 0x29020c00 (688000000)

Upstream:
fDestSingleTxTargetUsChanId = 0x1 (1)
fTargetingContext = 1 (ErrorRecovery)

Startup UCD Selection Info:

low priority candidate ucid list = 2 4 3 1 6 5 7 8


happy home ucid set = 1 2 3 4

Upstream Active Channel Settings:

ucid rpt enable sel prio MAP source dcid's


---- ---------- -------- -----------------
1 0x1c0 0
2 0x1c0 0
3 0x1c0 0
4 0x1c0 0
5 0x1c0 0
6 0x1c0 0
7 0x1c0 0
8 0x1c0 0

BcmCmUsTargetMset (a.k.a. usable UCDs gathered during startup):

us config
phy change ranging scdma
type ucid dcid count tried? enabled?
---- ---- ---- ------ ------- --------
3 1 32 4 n n
3 2 32 4 n n
3 3 32 4 n n
3 4 32 4 n n
3 5 32 4 n n
3 6 32 4 n n
3 7 32 4 n n
3 8 32 4 n n

[01:53:48 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper)
starting docs3 upstream initialization on target ucid=2
with upstream phy type 3 on hardware transmitter index 0
[01:53:48 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::ExecuteTccCmd: hwTxId=0
docs ucid=0
[01:53:48 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0
[01:53:48 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::InstallUsSets: Installing
UCD w/ucid for UCID=2 for CM hardware tx chan 0

[01:53:48 01/01/1970] [CmDocsisCtlThread]


BcmCmUsSetsState::TestAndLaunchUsTimeSync: starting upstream time sync
acquisition...
[01:53:48 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefOk: (Cm
Multi US Helper) target hwTxId=0
[01:53:48 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::UsTimeRefOk: upstream time
sync acquired for fHwTxId=0

== Beginning initial ranging for Docsis UCID 2 ==


Minimum transmit power is 17 dBmV
Maximum transmit power is 53 dBmV
Stored power level for UCID 2 is 38 dBmV
Using per transmitter stored initial upstream power = 38 dBmV hwTxId = 0 docsis
UCID = 2
RNG-RSP UsChanId=2 Adj: tim=1920 freq=-61 Stat=Continue (CmdPwr (UsChanId-dBmV):
(2-40.50) )
[01:53:49 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0xc9
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (2-
41.00) )
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (2-
41.00) )
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (2-
41.00) )
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (2-
41.00) )
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Success (CmdPwr (UsChanId-dBmV): (2-
41.00) )
[01:53:54 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::FirstRngSuccess:
(CmDocsisCtlThread)
first RNG-RSP w/status==SUCCESS for hwTxId=0 and DOCSIS ucid=2
[01:53:54 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::LaunchEaeBpkm:
(CmDocsisCtlThread) BPKM enabled. starting Early Authentication and Encryption BPKM
key requests. Primary Sid = 201
CM/DocsisCtl> Bandwidth request failure! Status = 0

BcmCmUsChanTimerMuxACT::HandleEvent() @time=7024380 fTimerType=5


(kT4NoStationMaint) hwTxId=0 docs ucid=2
[01:57:04 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::T4NoStationMaintEvent: ERROR - no Station Maint map op error.
hwTxId=0 docs ucid=2
[01:57:04 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::CommonRngErrorHandler: reason=10 (T4NoStationMaintTimeout)
hwTxId=0 docs ucid=2
[01:57:04 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) Purging DS
frequency 779000000 from current scan pass due to pre-registration restart error
[01:57:04 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) reinit MAC #34:
T4NoStationMaintTimeout
[01:57:04 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::Reset:
(CmDocsisCtlThread) DefaultSnmpAgentClass::RestartPendingEvent for Vendor CM
Agent w/ BRCM Factory Support
Logging event: Received Response to Broadcast Maintenance Request, But no Unicast
Maintenance opportunities received - T4 time out;CM-MAC=fc:4a:e9:de:ad:88;CMTS-
MAC=28:52:61:fa:d8:78;CM-QOS=1.1;CM-VER=3.1;
Vendor CM Agent w/ BRCM Factory Support updating ifTableLastChange.
Vendor CM Agent w/ BRCM Factory Support resetting to default state.
Vendor CM Agent w/ BRCM Factory Support destroying users...
Vendor CM Agent w/ BRCM Factory Support destroying notifies...
Vendor CM Agent w/ BRCM Factory Support destroying views...
Allowing DOCS-CABLE-DEVICE-MIB IP filters.
Vendor CM Agent w/ BRCM Factory Support deferring traps.
Received RG Event 0x80000001 State 0x1
eRouter Linux WAN Down
[01:57:04 01/01/1970] [eRouterMsgPipe] eRouterMsgPipe::UpdateIpNetToMediaEntry:
(eRouterMsgPipe) eRouter IP address:0.0.0.0
01:57:04.670 01/01/1970 (CALC) mtaCmStatusInfo() - MTA is Signaled: *NOT-
OPERATIONAL* (Stat=0x1) emtaCurState = 0.
EmtaSnmpAgent::SoftReset
Pausing trap thread
emta factory agentResetting to default state.
emta factory agent destroying users...
emta factory agent destroying notifies...
emta factory agent destroying views...
emta factory agent entering RFC-2576 Coexistence security mode.
emta factory agent entering Basic/Hybrid flow provisioning mode.
Resuming trap thread
Stopping DHCP/ToD/TFTP (client requested)...
[01:57:04 01/01/1970] [CmDocsisIpThread] BcmEcosIpHalIf::RemoveIpv6Address: (IP
Stack1 HalIf) ERROR - Failed to remove IPv6 address fe80::fe4a:e9ff:fede:ad88/64
from the stack!
[01:57:04 01/01/1970] [CmDocsisIpThread] BcmDhcpV6ClientIf::ReleaseAddresses:
(DHCPv6 ClientIf for IP Stack1) ERROR - IA state is initial; there is no address to
release.
BcmDocsis3DsMacEnableMulticastDsidForwarding 0; primary DS = 0
SCQAM DSID filter control = 0x00
OFDM DSID filter control = 0x01
Deleting DOCSIS 1.0 CoS Settings for SID 0xc9
[01:57:05 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows:
(DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along
with associated Classifiers and PHS rules...
[01:57:05 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState:
(CmDocsisCtlThread)
[01:57:05 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Primary SID for usHwChannel 0 to 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 1
Updating US chan 8 data Profile test msg for Sid: 0x0.
Updating US chan 9 data Profile test msg for Sid: 0x0.
CM/DocsisCtl> [01:57:05 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL declared PULSE lost!
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=false
[01:57:05 01/01/1970] [CmDocsisCtlThread] BcmCmMultiDsHelper::PreRegDsChanChange:
target freq hz = 0
reason string = ErrorRecovery
CmInitReason = 16
Starting DS scanning...
[01:57:05 01/01/1970] [CmDocsisCtlThread] BcmCmDownstreamScan::StartScan: Starting
DS scan
Checking for cable cut...

CM/DocsisCtl> Plant power is 15.65

Cable connected

CM/DocsisCtl> Scanning 780.000 MHz SC-QAM (Annex A(Eu.1M))


Scanning 781.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 782.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 783.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 784.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 785.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 786.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 787.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 788.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 789.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 790.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 791.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 792.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 793.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 794.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 795.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 796.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 797.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 798.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 799.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 800.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 801.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 802.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 803.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 804.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 805.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 806.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 807.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 808.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 809.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 810.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 811.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 812.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 813.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 814.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 815.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 816.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 817.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 818.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 819.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 820.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 821.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 822.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 823.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 824.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 825.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 826.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 827.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 828.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 829.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 830.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 831.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 832.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 833.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 834.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 835.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 836.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 837.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 838.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 839.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 840.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 841.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 842.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 843.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 844.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 845.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 846.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 847.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 848.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 849.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 850.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 851.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 852.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 853.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 854.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 855.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 856.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 857.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 858.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 859.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 860.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 861.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 862.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 863.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 864.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 865.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 866.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 867.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 868.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 869.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 870.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 871.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 872.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 873.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 874.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 875.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 876.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 877.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 878.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 879.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 880.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 881.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 882.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 883.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 884.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 885.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 886.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 887.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 888.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 889.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 890.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 891.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 892.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 893.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 894.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 895.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 896.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 897.000 MHz purged (Annex A(Eu.1M))
Scanning 898.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 899.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 900.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 901.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 902.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 903.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 904.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 905.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 906.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 907.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 908.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 909.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 910.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 911.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 912.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 913.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 914.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 915.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 916.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 917.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 918.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 919.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 920.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 921.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 922.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 923.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 924.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 925.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 926.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 927.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 928.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 929.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 930.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 931.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 932.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 933.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 934.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 935.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 936.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 937.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 938.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 939.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 940.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 941.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 942.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 943.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 944.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 945.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 946.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 947.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 948.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 949.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 950.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 951.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 952.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 953.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 954.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 955.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 956.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 957.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 958.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 959.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 960.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 961.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 962.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 963.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 964.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 965.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 966.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 967.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 968.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 969.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 970.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 971.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 972.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 973.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 974.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 975.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 976.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 977.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 978.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 979.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 980.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 981.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 982.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 983.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 984.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 985.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 986.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 987.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 988.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 989.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 990.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 991.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 992.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 993.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 994.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 995.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 996.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 997.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 998.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 999.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 1000.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 1001.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 1002.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 1002.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 1001.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 1001.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 1001.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 1001.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 1000.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 1000.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 1000.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 1000.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 999.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 999.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 999.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 999.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 998.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 998.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 998.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 998.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 997.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 997.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 997.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 997.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 996.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 996.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 996.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 996.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 995.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 995.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 995.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 995.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 994.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 994.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 994.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 994.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 993.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 993.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 993.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 993.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 992.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 992.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 992.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 992.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 991.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 991.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 991.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 991.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 990.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 990.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 990.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 990.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 989.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 989.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 989.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 989.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 988.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 988.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 988.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 988.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 987.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 987.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 987.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 987.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 986.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 986.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 986.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 986.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 985.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 985.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 985.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 985.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 984.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 984.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 984.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 984.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 983.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 983.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 983.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 983.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 982.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 982.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 982.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 982.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 981.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 981.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 981.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 981.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 980.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 980.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 980.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 980.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 979.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 979.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 979.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 979.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 978.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 978.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 978.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 978.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 977.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 977.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 977.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 977.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 976.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 976.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 976.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 976.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 975.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 975.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 975.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 975.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 974.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 974.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 974.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 974.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 973.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 973.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 973.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 973.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 972.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 972.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 972.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 972.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 971.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 971.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 971.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 971.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 970.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 970.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 970.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 970.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 969.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 969.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 969.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 969.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 968.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 968.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 968.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 968.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 967.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 967.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 967.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 967.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 966.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 966.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 966.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 966.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 965.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 965.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 965.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 965.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 964.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 964.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 964.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 964.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 963.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 963.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 963.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 963.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 962.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 962.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 962.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 962.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 961.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 961.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 961.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 961.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 960.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 960.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 960.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 960.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 959.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 959.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 959.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 959.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 958.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 958.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 958.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 958.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 957.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 957.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 957.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 957.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 956.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 956.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 956.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 956.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 955.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 955.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 955.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 955.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 954.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 954.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 954.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 954.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 953.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 953.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 953.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 953.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 952.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 952.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 952.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 952.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 951.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 951.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 951.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 951.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 950.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 950.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 950.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 950.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 949.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 949.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 949.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 949.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 948.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 948.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 948.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 948.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 947.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 947.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 947.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 947.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 946.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 946.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 946.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 946.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 945.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 945.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 945.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 945.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 944.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 944.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 944.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 944.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 943.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 943.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 943.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 943.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 942.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 942.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 942.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 942.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 941.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 941.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 941.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 941.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 940.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 940.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 940.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 940.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 939.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 939.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 939.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 939.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 938.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 938.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 938.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 938.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 937.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 937.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 937.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 937.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 936.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 936.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 936.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 936.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 935.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 935.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 935.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 935.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 934.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 934.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 934.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 934.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 933.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 933.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 933.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 933.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 932.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 932.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 932.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 932.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 931.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 931.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 931.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 931.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 930.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 930.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 930.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 930.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 929.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 929.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 929.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 929.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 928.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 928.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 928.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 928.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 927.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 927.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 927.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 927.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 926.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 926.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 926.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 926.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 925.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 925.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 925.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 925.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 924.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 924.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 924.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 924.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 923.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 923.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 923.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 923.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 922.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 922.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 922.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 922.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 921.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 921.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 921.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 921.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 920.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 920.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 920.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 920.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 919.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 919.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 919.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 919.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 918.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 918.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 918.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 918.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 917.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 917.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 917.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 917.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 916.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 916.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 916.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 916.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 915.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 915.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 915.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 915.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 914.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 914.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 914.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 914.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 913.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 913.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 913.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 913.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 912.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 912.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 912.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 912.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 911.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 911.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 911.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 911.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 910.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 910.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 910.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 910.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 909.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 909.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 909.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 909.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 908.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 908.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 908.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 908.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 907.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 907.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 907.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 907.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 906.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 906.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 906.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 906.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 905.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 905.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 905.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 905.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 904.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 904.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 904.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 904.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 903.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 903.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 903.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 903.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 902.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 902.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 902.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 902.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 901.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 901.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 901.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 901.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 900.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 900.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 900.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 900.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 899.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 899.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 899.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 899.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 898.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 898.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 898.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 898.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 897.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 897.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 897.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 897.000 MHz purged (Annex A(Eu.250K))
Scanning 896.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 896.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 896.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 896.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 895.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 895.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 895.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 895.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 894.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 894.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 894.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 894.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 893.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 893.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 893.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 893.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 892.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 892.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 892.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 892.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 891.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 891.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 891.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 891.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 890.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 890.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 890.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 890.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 889.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 889.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 889.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 889.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 888.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 888.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 888.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 888.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 887.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 887.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 887.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 887.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 886.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 886.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 886.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 886.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 885.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 885.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 885.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 885.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 884.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 884.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 884.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 884.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 883.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 883.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 883.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 883.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 882.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 882.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 882.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 882.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 881.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 881.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 881.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 881.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 880.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 880.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 880.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 880.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 879.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 879.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 879.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 879.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 878.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 878.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 878.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 878.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 877.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 877.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 877.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 877.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 876.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 876.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 876.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 876.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 875.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 875.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 875.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 875.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 874.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 874.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 874.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 874.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 873.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 873.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 873.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 873.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 872.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 872.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 872.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 872.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 871.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 871.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 871.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 871.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 870.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 870.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 870.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 870.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 869.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 869.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 869.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 869.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 868.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 868.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 868.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 868.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 867.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 867.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 867.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 867.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 866.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 866.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 866.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 866.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 865.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 865.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 865.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 865.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 864.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 864.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 864.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 864.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 863.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 863.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 863.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 863.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 862.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 862.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 862.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 862.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 861.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 861.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 861.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 861.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 860.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 860.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 860.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 860.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 859.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 859.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 859.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 859.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 858.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 858.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 858.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 858.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 857.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 857.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 857.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 857.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 856.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 856.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 856.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 856.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 855.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 855.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 855.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 855.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 854.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 854.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 854.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 854.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 853.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 853.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 853.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 853.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 852.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 852.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 852.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 852.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 851.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 851.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 851.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 851.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 850.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 850.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 850.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 850.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 849.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 849.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 849.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 849.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 848.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 848.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 848.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 848.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 847.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 847.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 847.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 847.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 846.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 846.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 846.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 846.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 845.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 845.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 845.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 845.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 844.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 844.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 844.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 844.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 843.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 843.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 843.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 843.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 842.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 842.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 842.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 842.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 841.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 841.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 841.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 841.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 840.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 840.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 840.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 840.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 839.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 839.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 839.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 839.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 838.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 838.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 838.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 838.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 837.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 837.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 837.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 837.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 836.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 836.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 836.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 836.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 835.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 835.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 835.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 835.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 834.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 834.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 834.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 834.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 833.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 833.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 833.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 833.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 832.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 832.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 832.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 832.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 831.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 831.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 831.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 831.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 830.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 830.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 830.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 830.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 829.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 829.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 829.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 829.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 828.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 828.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 828.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 828.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 827.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 827.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 827.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 827.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 826.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 826.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 826.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 826.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 825.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 825.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 825.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 825.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 824.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 824.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 824.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 824.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 823.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 823.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 823.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 823.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 822.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 822.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 822.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 822.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 821.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 821.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 821.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 821.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 820.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 820.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 820.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 820.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 819.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 819.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 819.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 819.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 818.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 818.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 818.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 818.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 817.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 817.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 817.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 817.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 816.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 816.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 816.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 816.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 815.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 815.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 815.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 815.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 814.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 814.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 814.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 814.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 813.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 813.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 813.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 813.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 812.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 812.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 812.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 812.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 811.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 811.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 811.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 811.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 810.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 810.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 810.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 810.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 809.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 809.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 809.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 809.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 808.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 808.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 808.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 808.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 807.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 807.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 807.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 807.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 806.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 806.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 806.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 806.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 805.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 805.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 805.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 805.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 804.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 804.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 804.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 804.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 803.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 803.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 803.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 803.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 802.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 802.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 802.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 802.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 801.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 801.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 801.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 801.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 800.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 800.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 800.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 800.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 799.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 799.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 799.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 799.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 798.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 798.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 798.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 798.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 797.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 797.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 797.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 797.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 796.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 796.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 796.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 796.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 795.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 795.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 795.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 795.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 794.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 794.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 794.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 794.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 793.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 793.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 793.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 793.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 792.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 792.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 792.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 792.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 791.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 791.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 791.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 791.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 790.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 790.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 790.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 790.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 789.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 789.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 789.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 789.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 788.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 788.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 788.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 788.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 787.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 787.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 787.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 787.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 786.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 786.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 786.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 786.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 785.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 785.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 785.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 785.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 784.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 784.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 784.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 784.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 783.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 783.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 783.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 783.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 782.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 782.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 782.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 782.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 781.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 781.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 781.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 781.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 780.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 780.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 780.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 780.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 779.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 779.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 779.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 779.000 MHz purged (Annex A(Eu.250K))
Scanning 778.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 778.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 778.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 778.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 777.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 777.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 777.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 777.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 776.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 776.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 776.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 776.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 775.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 775.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 775.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 775.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 774.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 774.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 774.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 774.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 773.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 773.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 773.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 773.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 772.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 772.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 772.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 772.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 771.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 771.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 771.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 771.000 MHz purged (Annex A(Eu.250K))
Scanning 770.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 770.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 770.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 770.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 769.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 769.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 769.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 769.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 768.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 768.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 768.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 768.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 767.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 767.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 767.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 767.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 766.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 766.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 766.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 766.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 765.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 765.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 765.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 765.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 764.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 764.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 764.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 764.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 763.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 763.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 763.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 763.000 MHz purged (Annex A(Eu.250K))
Scanning 762.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 762.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 762.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 762.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 761.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 761.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 761.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 761.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 760.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 760.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 760.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 760.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 759.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 759.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 759.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 759.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 758.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 758.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 758.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 758.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 757.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 757.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 757.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 757.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 756.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 756.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 756.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 756.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 755.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 755.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 755.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 755.000 MHz purged (Annex A(Eu.250K))
Scanning 754.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 754.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 754.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 754.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 753.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 753.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 753.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 753.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 752.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 752.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 752.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 752.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 751.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 751.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 751.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 751.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 750.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 750.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 750.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 750.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 749.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 749.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 749.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 749.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 748.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 748.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 748.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 748.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 747.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 747.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 747.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 747.000 MHz purged (Annex A(Eu.250K))
Scanning 746.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 746.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 746.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 746.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 745.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 745.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 745.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 745.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 744.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 744.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 744.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 744.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 743.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 743.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 743.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 743.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 742.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 742.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 742.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 742.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 741.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 741.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 741.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 741.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 740.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 740.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 740.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 740.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 739.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 739.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 739.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 739.000 MHz purged (Annex A(Eu.250K))
Scanning 738.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 738.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 738.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 738.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 737.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 737.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 737.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 737.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 736.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 736.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 736.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 736.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 735.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 735.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 735.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 735.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 734.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 734.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 734.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 734.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 733.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 733.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 733.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 733.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 732.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 732.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 732.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 732.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 731.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 731.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 731.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 731.000 MHz purged (Annex A(Eu.250K))
Scanning 730.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 730.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 730.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 730.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 729.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 729.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 729.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 729.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 728.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 728.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 728.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 728.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 727.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 727.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 727.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 727.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 726.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 726.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 726.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 726.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 725.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 725.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 725.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 725.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 724.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 724.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 724.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 724.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 723.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 723.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 723.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 723.000 MHz purged (Annex A(Eu.250K))
Scanning 722.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 722.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 722.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 722.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 721.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 721.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 721.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 721.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 720.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 720.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 720.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 720.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 719.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 719.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 719.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 719.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 718.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 718.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 718.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 718.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 717.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 717.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 717.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 717.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 716.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 716.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 716.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 716.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 715.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 715.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 715.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 715.000 MHz purged (Annex A(Eu.250K))
Scanning 714.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 714.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 714.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 714.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 713.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 713.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 713.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 713.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 712.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 712.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 712.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 712.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 711.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 711.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 711.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 711.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 710.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 710.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 710.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 710.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 709.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 709.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 709.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 709.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 708.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 708.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 708.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 708.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 707.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 707.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 707.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 707.000 MHz purged (Annex A(Eu.250K))
Scanning 706.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 706.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 706.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 706.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 705.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 705.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 705.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 705.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 704.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 704.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 704.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 704.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 703.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 703.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 703.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 703.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 702.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 702.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 702.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 702.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 701.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 701.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 701.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 701.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 700.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 700.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 700.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 700.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 699.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 699.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 699.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 699.000 MHz purged (Annex A(Eu.250K))
Scanning 698.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 698.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 698.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 698.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 697.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 697.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 697.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 697.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 696.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 696.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 696.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 696.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 695.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 695.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 695.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 695.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 694.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 694.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 694.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 694.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 693.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 693.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 693.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 693.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 692.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 692.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 692.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 692.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 691.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 691.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 691.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 691.000 MHz purged (Annex A(Eu.250K))
Scanning 690.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 690.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 690.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 690.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 689.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 689.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 689.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 689.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 687.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 687.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 687.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 687.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 686.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 686.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 686.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 686.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 685.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 685.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 685.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 685.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 684.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 684.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 684.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 684.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 683.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 683.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 683.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 683.000 MHz purged (Annex A(Eu.250K))
Scanning 682.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 682.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 682.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 682.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 681.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 681.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 681.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 681.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 680.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 680.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 680.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 680.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 679.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 679.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 679.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 679.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 678.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 678.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 678.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 678.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 677.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 677.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 677.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 677.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 676.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 676.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 676.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 676.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 675.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 675.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 675.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 675.000 MHz purged (Annex A(Eu.250K))
Scanning 674.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 674.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 674.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 674.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 673.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 673.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 673.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 673.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 672.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 672.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 672.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 672.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 671.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 671.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 671.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 671.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 670.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 670.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 670.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 670.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 669.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 669.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 669.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 669.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 668.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 668.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 668.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 668.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 667.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 667.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 667.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 667.000 MHz purged (Annex A(Eu.250K))
Scanning 666.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 666.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 666.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 666.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 665.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 665.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 665.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 665.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 664.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 664.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 664.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 664.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 663.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 663.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 663.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 663.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 662.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 662.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 662.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 662.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 661.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 661.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 661.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 661.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 660.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 660.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 660.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 660.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 659.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 659.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 659.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 659.000 MHz purged (Annex A(Eu.250K))
Scanning 658.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 658.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 658.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 658.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 657.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 657.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 657.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 657.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 656.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 656.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 656.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 656.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 655.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 655.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 655.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 655.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 654.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 654.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 654.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 654.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 653.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 653.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 653.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 653.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 652.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 652.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 652.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 652.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 651.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 651.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 651.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 651.000 MHz purged (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 650.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 650.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 650.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 650.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 649.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 649.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 649.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 649.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 648.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 648.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 648.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 648.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 647.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 647.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 647.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 647.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 646.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 646.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 646.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 646.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 645.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 645.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 645.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 645.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 644.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 644.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 644.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 644.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 643.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 643.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 643.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 643.000 MHz purged (Annex A(Eu.250K))
Scanning 642.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 642.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 642.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 642.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 641.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 641.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 641.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 641.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 640.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 640.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 640.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 640.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 639.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 639.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 639.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 639.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 638.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 638.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 638.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 638.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 637.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 637.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 637.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 637.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 636.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 636.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 636.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 636.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 635.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 635.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 635.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 635.000 MHz purged (Annex A(Eu.250K))
Scanning 634.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 634.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 634.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 634.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 633.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 633.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 633.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 633.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 632.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 632.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 632.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 632.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 631.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 631.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 631.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 631.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 630.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 630.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 630.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 630.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 629.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 629.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 629.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 629.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 628.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 628.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 628.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 628.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 627.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 627.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 627.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 627.000 MHz purged (Annex A(Eu.250K))
Scanning 626.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 626.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 626.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 626.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 625.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 625.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 625.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 625.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 624.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 624.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 624.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 624.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 623.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 623.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 623.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 623.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 622.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 622.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 622.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 622.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 621.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 621.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 621.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 621.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 620.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 620.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 620.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 620.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 619.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 619.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 619.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 619.000 MHz purged (Annex A(Eu.250K))
Scanning 618.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 618.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 618.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 618.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 617.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 617.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 617.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 617.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 616.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 616.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 616.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 616.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 615.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 615.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 615.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 615.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 614.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 614.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 614.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 614.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 613.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 613.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 613.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 613.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 612.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 612.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 612.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 612.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 611.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 611.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 611.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 611.000 MHz purged (Annex A(Eu.250K))
Scanning 610.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 610.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 610.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 610.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 609.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 609.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 609.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 609.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 608.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 608.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 608.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 608.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 607.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 607.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 607.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 607.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 606.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 606.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 606.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 606.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 605.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 605.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 605.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 605.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 604.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 604.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 604.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 604.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 603.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 603.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 603.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 603.000 MHz purged (Annex A(Eu.250K))
Scanning 602.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 602.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 602.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 602.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 601.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 601.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 601.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 601.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 600.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 600.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 600.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 600.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 599.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 599.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 599.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 599.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 598.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 598.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 598.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 598.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 597.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 597.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 597.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 597.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 596.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 596.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 596.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 596.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 595.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 595.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 595.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 595.000 MHz purged (Annex A(Eu.250K))
Scanning 594.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 594.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 594.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 594.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 593.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 593.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 593.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 593.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 592.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 592.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 592.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 592.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 591.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 591.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 591.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 591.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 590.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 590.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 590.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 590.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 589.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 589.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 589.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 589.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 588.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 588.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 588.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 588.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 587.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 587.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 587.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 587.000 MHz purged (Annex A(Eu.250K))
Scanning 586.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 586.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 586.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 586.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 585.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 585.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 585.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 585.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 584.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 584.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 584.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 584.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 583.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 583.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 583.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 583.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 582.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 582.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 582.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 582.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 581.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 581.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 581.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 581.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 580.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 580.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 580.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 580.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 579.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 579.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 579.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 579.000 MHz purged (Annex A(Eu.250K))
Scanning 578.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 578.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 578.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 578.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 577.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 577.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 577.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 577.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 576.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 576.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 576.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 576.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 575.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 575.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 575.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 575.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 574.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 574.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 574.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 574.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 573.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 573.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 573.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 573.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 572.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 572.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 572.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 572.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 571.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 571.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 571.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 571.000 MHz purged (Annex A(Eu.250K))
Scanning 570.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 570.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 570.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 570.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 569.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 569.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 569.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 569.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 568.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 568.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 568.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 568.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 567.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 567.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 567.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 567.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 566.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 566.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 566.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 566.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 565.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 565.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 565.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 565.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 564.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 564.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 564.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 564.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 563.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 563.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 563.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 563.000 MHz purged (Annex A(Eu.250K))
Scanning 562.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 562.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 562.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 562.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 561.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 561.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 561.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 561.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 560.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 560.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 560.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 560.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 559.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 559.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 559.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 559.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 558.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 558.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 558.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 558.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 557.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 557.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 557.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 557.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 556.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 556.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 556.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 556.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 555.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 555.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 555.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 555.000 MHz purged (Annex A(Eu.250K))
Scanning 554.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 554.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 554.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 554.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 553.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 553.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 553.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 553.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 552.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 552.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 552.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 552.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 551.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 551.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 551.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 551.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 550.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 550.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 550.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 550.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 549.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 549.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 549.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 549.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 548.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 548.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 548.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 548.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 547.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 547.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 547.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 547.000 MHz purged (Annex A(Eu.250K))
Scanning 546.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 546.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 546.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 546.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 545.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 545.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 545.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 545.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 544.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 544.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 544.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 544.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 543.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 543.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 543.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 543.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 542.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 542.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 542.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 542.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 541.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 541.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 541.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 541.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 540.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 540.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 540.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 540.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 539.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 539.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 539.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 539.000 MHz purged (Annex A(Eu.250K))
Scanning 538.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 538.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 538.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 538.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 537.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 537.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 537.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 537.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 536.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 536.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 536.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 536.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 535.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 535.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 535.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 535.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 534.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 534.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 534.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 534.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 533.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 533.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 533.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 533.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 532.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 532.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 532.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 532.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 531.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 531.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 531.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 531.000 MHz purged (Annex A(Eu.250K))
Scanning 530.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 530.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 530.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 530.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 529.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 529.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 529.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 529.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 528.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 528.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 528.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 528.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 527.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 527.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 527.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 527.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 526.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 526.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 526.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 526.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 525.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 525.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 525.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 525.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 524.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 524.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 524.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 524.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 523.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 523.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 523.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 523.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 522.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 522.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 522.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 522.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 521.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 521.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 521.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 521.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 520.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 520.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 520.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 520.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 519.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 519.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 519.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 519.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 518.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 518.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 518.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 518.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 517.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 517.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 517.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 517.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 516.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 516.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 516.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 516.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 515.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 515.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 515.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 515.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 514.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 514.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 514.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 514.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 513.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 513.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 513.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 513.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 512.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 512.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 512.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 512.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 511.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 511.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 511.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 511.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 510.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 510.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 510.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 510.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 509.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 509.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 509.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 509.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 508.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 508.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 508.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 508.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 507.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 507.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 507.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 507.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 506.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 506.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 506.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 506.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 505.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 505.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 505.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 505.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 504.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 504.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 504.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 504.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 503.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 503.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 503.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 503.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 502.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 502.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 502.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 502.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 501.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 501.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 501.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 501.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 500.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 500.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 500.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 500.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 499.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 499.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 499.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 499.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 498.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 498.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 498.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 498.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 497.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 497.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 497.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 497.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 496.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 496.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 496.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 496.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 495.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 495.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 495.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 495.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 494.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 494.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 494.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 494.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 493.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 493.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 493.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 493.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 492.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 492.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 492.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 492.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 491.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 491.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 491.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 491.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 490.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 490.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 490.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 490.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 489.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 489.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 489.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 489.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 488.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 488.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 488.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 488.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 487.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 487.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 487.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 487.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 486.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 486.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 486.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 486.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 485.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 485.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 485.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 485.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 484.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 484.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 484.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 484.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 483.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 483.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 483.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 483.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 482.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 482.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 482.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 482.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 481.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 481.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 481.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 481.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 480.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 480.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 480.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 480.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 479.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 479.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 479.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 479.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 478.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 478.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 478.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 478.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 477.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 477.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 477.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 477.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 476.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 476.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 476.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 476.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 475.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 475.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 475.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 475.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 474.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 474.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 474.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 474.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 473.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 473.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 473.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 473.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 472.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 472.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 472.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 472.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 471.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 471.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 471.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 471.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 470.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 470.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 470.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 470.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 469.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 469.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 469.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 469.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 468.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 468.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 468.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 468.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 467.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 467.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 467.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 467.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 466.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 466.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 466.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 466.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 465.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 465.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 465.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 465.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 464.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 464.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 464.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 464.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 463.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 463.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 463.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 463.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 462.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 462.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 462.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 462.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 461.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 461.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 461.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 461.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 460.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 460.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 460.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 460.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 459.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 459.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 459.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 459.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 458.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 458.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 458.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 458.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 457.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 457.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 457.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 457.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 456.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 456.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 456.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 456.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 455.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 455.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 455.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 455.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 454.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 454.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 454.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 454.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 453.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 453.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 453.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 453.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 452.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 452.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 452.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 452.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 451.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 451.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 451.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 451.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 450.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 450.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 450.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 450.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 449.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 449.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 449.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 449.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 448.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 448.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 448.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 448.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 447.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 447.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 447.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 447.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 446.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 446.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 446.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 446.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 445.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 445.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 445.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 445.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 444.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 444.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 444.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 444.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 443.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 443.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 443.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 443.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 442.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 442.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 442.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 442.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 441.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 441.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 441.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 441.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 440.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 440.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 440.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 440.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 439.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 439.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 439.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 439.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 438.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 438.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 438.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 438.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 437.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 437.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 437.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 437.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 436.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 436.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 436.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 436.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 435.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 435.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 435.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 435.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 434.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 434.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 434.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 434.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 433.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 433.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 433.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 433.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 432.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 432.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 432.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 432.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 431.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 431.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 431.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 431.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 430.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 430.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 430.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 430.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 429.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 429.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 429.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 429.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 428.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 428.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 428.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 428.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 427.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 427.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 427.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 427.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 426.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 426.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 426.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 426.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 425.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 425.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 425.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 425.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 424.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 424.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 424.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 424.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 423.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 423.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 423.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 423.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 422.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 422.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 422.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 422.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 421.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 421.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 421.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 421.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 420.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 420.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 420.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 420.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 419.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 419.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 419.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 419.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 418.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 418.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 418.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 418.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 417.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 417.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 417.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 417.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 416.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 416.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 416.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 416.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 415.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 415.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 415.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 415.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 414.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 414.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 414.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 414.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 413.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 413.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 413.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 413.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 412.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 412.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 412.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 412.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 411.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 411.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 411.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 411.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 410.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 410.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 410.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 410.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 409.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 409.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 409.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 409.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 408.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 408.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 408.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 408.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 407.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 407.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 407.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 407.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 406.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 406.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 406.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 406.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 405.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 405.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 405.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 405.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 404.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 404.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 404.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 404.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 403.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 403.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 403.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 403.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 402.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 402.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 402.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 402.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 401.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 401.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 401.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 401.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 400.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 400.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 400.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 400.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 399.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 399.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 399.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 399.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 398.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 398.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 398.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 398.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 397.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 397.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 397.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 397.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 396.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 396.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 396.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 396.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 395.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 395.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 395.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 395.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 394.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 394.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 394.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 394.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 393.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 393.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 393.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 393.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 392.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 392.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 392.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 392.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 391.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 391.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 391.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 391.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 390.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 390.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 390.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 390.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 389.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 389.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 389.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 389.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 388.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 388.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 388.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 388.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 387.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 387.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 387.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 387.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 386.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 386.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 386.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 386.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 385.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 385.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 385.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 385.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 384.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 384.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 384.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 384.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 383.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 383.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 383.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 383.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 382.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 382.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 382.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 382.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 381.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 381.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 381.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 381.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 380.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 380.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 380.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 380.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 379.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 379.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 379.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 379.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 378.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 378.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 378.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 378.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 377.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 377.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 377.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 377.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 376.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 376.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 376.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 376.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 375.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 375.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 375.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 375.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 374.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 374.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 374.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 374.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 373.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 373.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 373.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 373.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 372.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 372.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 372.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 372.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 371.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 371.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 371.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 371.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 370.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 370.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 370.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 370.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 369.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 369.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 369.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 369.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 368.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 368.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 368.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 368.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 367.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 367.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 367.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 367.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 366.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 366.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 366.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 366.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 365.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 365.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 365.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 365.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 364.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 364.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 364.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 364.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 363.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 363.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 363.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 363.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 362.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 362.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 362.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 362.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 361.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 361.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 361.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 361.000 MHz purged (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 360.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 360.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 360.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 360.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 359.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 359.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 359.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 359.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 358.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 358.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 358.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 358.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 357.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 357.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 357.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 357.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 356.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 356.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 356.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 356.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 355.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 355.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 355.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 355.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 354.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 354.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 354.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 354.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 353.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 353.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 353.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 353.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 352.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 352.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 352.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 352.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 351.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 351.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 351.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 351.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 350.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 350.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 350.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 350.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 349.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 349.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 349.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 349.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 348.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 348.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 348.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 348.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 347.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 347.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 347.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 347.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 346.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 346.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 346.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 346.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 345.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 345.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 345.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 345.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 344.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 344.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 344.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 344.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 343.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 343.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 343.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 343.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 342.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 342.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 342.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 342.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 341.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 341.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 341.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 341.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 340.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 340.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 340.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 340.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 339.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 339.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 339.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 339.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 338.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 338.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 338.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 338.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 337.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 337.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 337.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 337.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 336.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 336.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 336.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 336.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 335.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 335.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 335.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 335.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 334.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 334.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 334.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 334.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 333.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 333.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 333.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 333.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 332.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 332.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 332.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 332.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 331.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 331.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 331.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 331.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 330.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 330.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 330.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 330.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 329.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 329.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 329.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 329.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 328.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 328.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 328.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 328.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 327.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 327.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 327.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 327.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 326.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 326.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 326.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 326.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 325.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 325.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 325.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 325.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 324.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 324.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 324.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 324.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 323.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 323.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 323.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 323.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 322.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 322.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 322.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 322.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 321.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 321.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 321.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 321.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 320.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 320.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 320.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 320.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 319.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 319.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 319.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 319.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 318.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 318.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 318.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 318.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 317.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 317.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 317.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 317.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 316.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 316.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 316.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 316.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 315.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 315.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 315.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 315.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 314.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 314.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 314.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 314.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 313.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 313.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 313.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 313.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 312.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 312.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 312.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 312.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 311.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 311.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 311.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 311.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 310.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 310.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 310.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 310.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 309.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 309.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 309.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 309.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 308.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 308.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 308.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 308.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 307.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 307.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 307.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 307.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 306.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 306.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 306.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 306.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 305.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 305.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 305.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 305.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 304.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 304.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 304.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 304.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 303.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 303.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 303.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 303.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 302.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 302.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 302.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 302.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 301.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 301.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 301.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 301.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 300.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 300.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 300.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 300.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 299.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 299.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 299.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 299.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 298.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 298.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 298.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 298.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 297.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 297.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 297.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 297.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 296.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 296.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 296.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 296.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 295.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 295.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 295.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 295.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 294.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 294.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 294.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 294.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 293.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 293.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 293.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 293.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 292.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 292.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 292.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 292.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 291.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 291.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 291.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 291.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 290.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 290.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 290.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 290.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 289.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 289.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 289.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 289.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 288.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 288.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 288.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 288.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 287.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 287.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 287.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 287.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 286.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 286.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 286.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 286.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 285.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 285.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 285.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 285.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 284.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 284.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 284.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 284.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 283.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 283.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 283.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 283.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 282.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 282.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 282.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 282.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 281.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 281.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 281.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 281.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 280.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 280.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 280.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 280.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 279.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 279.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 279.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 279.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 278.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 278.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 278.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 278.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 277.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 277.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 277.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 277.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 276.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 276.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 276.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 276.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 275.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 275.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 275.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 275.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 274.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 274.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 274.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 274.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 273.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 273.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 273.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 273.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 272.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 272.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 272.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 272.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 271.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 271.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 271.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 271.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 270.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 270.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 270.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 270.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 269.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 269.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 269.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 269.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 268.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 268.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 268.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 268.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 267.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 267.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 267.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 267.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 266.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 266.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 266.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 266.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 265.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 265.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 265.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 265.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 264.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 264.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 264.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 264.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 263.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 263.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 263.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 263.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 262.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 262.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 262.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 262.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 261.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 261.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 261.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 261.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 260.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 260.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 260.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 260.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 259.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 259.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 259.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 259.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 258.750 MHz SC-QAM (Annex A(Eu.250K))
Scanning 258.500 MHz SC-QAM (Annex A(Eu.250K))
Scanning 258.250 MHz SC-QAM (Annex A(Eu.250K))
Scanning 258.000 MHz SC-QAM (Annex A(Eu.250K))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 258.000 MHz PLC
Scanning 259.000 MHz PLC
Scanning 260.000 MHz PLC
Scanning 261.000 MHz PLC
Scanning 262.000 MHz PLC
Scanning 263.000 MHz PLC
Scanning 264.000 MHz PLC
Scanning 265.000 MHz PLC
Scanning 266.000 MHz PLC
Scanning 267.000 MHz PLC
Scanning 268.000 MHz PLC
Scanning 269.000 MHz PLC
Scanning 270.000 MHz PLC
Scanning 271.000 MHz PLC
Scanning 272.000 MHz PLC
Scanning 273.000 MHz PLC
Scanning 274.000 MHz PLC
Scanning 275.000 MHz PLC
Scanning 276.000 MHz PLC
Scanning 277.000 MHz PLC
Scanning 278.000 MHz PLC
Scanning 279.000 MHz PLC
Scanning 280.000 MHz PLC
Scanning 281.000 MHz PLC
Scanning 282.000 MHz PLC
Scanning 283.000 MHz PLC
Scanning 284.000 MHz PLC
Scanning 285.000 MHz PLC
Scanning 286.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 287.000 MHz PLC
Scanning 288.000 MHz PLC
Scanning 289.000 MHz PLC
Scanning 290.000 MHz PLC
Scanning 291.000 MHz PLC
Scanning 292.000 MHz PLC
Scanning 293.000 MHz PLC
Scanning 294.000 MHz PLC
Scanning 295.000 MHz PLC
Scanning 296.000 MHz PLC
Scanning 297.000 MHz PLC
Scanning 298.000 MHz PLC
Scanning 299.000 MHz PLC
Scanning 300.000 MHz PLC
Scanning 301.000 MHz PLC
Scanning 302.000 MHz PLC
Scanning 303.000 MHz PLC
Scanning 304.000 MHz PLC
Scanning 305.000 MHz PLC
Scanning 306.000 MHz PLC
Scanning 307.000 MHz PLC
Scanning 308.000 MHz PLC
Scanning 309.000 MHz PLC
Scanning 310.000 MHz PLC
Scanning 311.000 MHz PLC
Scanning 312.000 MHz PLC
Scanning 313.000 MHz PLC
Scanning 314.000 MHz PLC
Scanning 315.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 316.000 MHz PLC
Scanning 317.000 MHz PLC
Scanning 318.000 MHz PLC
Scanning 319.000 MHz PLC
Scanning 320.000 MHz PLC
Scanning 321.000 MHz PLC
Scanning 322.000 MHz PLC
Scanning 323.000 MHz PLC
Scanning 324.000 MHz PLC
Scanning 325.000 MHz PLC
Scanning 326.000 MHz PLC
Scanning 327.000 MHz PLC
Scanning 328.000 MHz PLC
Scanning 329.000 MHz PLC
Scanning 330.000 MHz PLC
Scanning 331.000 MHz PLC
Scanning 332.000 MHz PLC
Scanning 333.000 MHz PLC
Scanning 334.000 MHz PLC
Scanning 335.000 MHz PLC
Scanning 336.000 MHz PLC
Scanning 337.000 MHz PLC
Scanning 338.000 MHz PLC
Scanning 339.000 MHz PLC
Scanning 340.000 MHz PLC
Scanning 341.000 MHz PLC
Scanning 342.000 MHz PLC
Scanning 343.000 MHz PLC
Scanning 344.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 345.000 MHz PLC
Scanning 346.000 MHz PLC
Scanning 347.000 MHz PLC
Scanning 348.000 MHz PLC
Scanning 349.000 MHz PLC
Scanning 350.000 MHz PLC
Scanning 351.000 MHz PLC
Scanning 352.000 MHz PLC
Scanning 353.000 MHz PLC
Scanning 354.000 MHz PLC
Scanning 355.000 MHz PLC
Scanning 356.000 MHz PLC
Scanning 357.000 MHz PLC
Scanning 358.000 MHz PLC
Scanning 359.000 MHz PLC
Scanning 360.000 MHz PLC
Scanning 361.000 MHz PLC locked PLC
[02:11:52 01/01/1970] [CmDocsisCtlThread] BcmCmDsChanOfdm::DsLockOk:
(BcmCmDsChanOfdm) hwRxId=32 freq=0 dcid=0 PLC found
[02:11:52 01/01/1970] [CmDocsisCtlThread] BcmCmDsChanOfdm::StartOcdDpdGathering:
(BcmCmDsChanOfdm) starting OCD/DPD gathering on PLC
OCD/DPD Filtering being configured for hwRxId=32 on FilCh=0[PLC=0/ProfA=1] ->
filter enable = false. TimeMs=0
[02:11:53 01/01/1970] [CmDocsisCtlThread] BcmCmDsChanOfdm::OcdSetsRx:
(BcmCmDsChanOfdm) hwRxId=32 dcid=0
[02:11:53 01/01/1970] [CmDocsisCtlThread] BcmCmDsChanOfdm::DpdSetsRx:
(BcmCmDsChanOfdm) Received DPD on hwRxId=32 dcid=0 for assigned Profile NCP
[02:11:53 01/01/1970] [CmDocsisCtlThread] BcmCmDsChanOfdm::DpdSetsRx:
(BcmCmDsChanOfdm) Received DPD on hwRxId=32 dcid=0 for assigned Profile A
[02:11:53 01/01/1970] [CmDocsisCtlThread]
BcmCmDsChanOfdm::DetectOcdDpdGatheringPlcDone: (BcmCmDsChanOfdm) hwRxId=32 dcid=0
OCD/DPD gathered via PLC. install OCD settings.
OCD/DPD Filtering being configured for hwRxId=32 on FilCh=0[PLC=0/ProfA=1] ->
filter enable = true. TimeMs=121
[02:11:53 01/01/1970] [CmDocsisCtlThread] BcmCmDsChanOfdm::OcdInstallOk:
(BcmCmDsChanOfdm) hwRxId=32 dcid=160 OCD installed.
[02:11:53 01/01/1970] [CmDocsisCtlThread] BcmCmDsOfdmProfileState::InstallDpdSets:
HwRxId=32: installing DPD for profile NCP
CM/DocsisCtl> [02:11:54 01/01/1970] [CmDocsisCtlThread]
BcmCmDsOfdmProfileState::InstallDpdSets: HwRxId=32: installing DPD for profile A
Ofdm0: profile0 LOCK in 2 ms!
[02:11:54 01/01/1970] [CmDocsisCtlThread] BcmCmDsOfdmProfileState::FecLockOk:
hwRxId=32 dcid=160 profId=255 (NCP)
CM/DocsisCtl> [02:11:55 01/01/1970] [CmDocsisCtlThread]
BcmCmDsOfdmProfileState::FecLockOk: hwRxId=32 dcid=160 profId=0 (A)
[02:11:55 01/01/1970] [CmDocsisCtlThread]
BcmCmMacDomainSetsState::StartDsMacMddInit:
**********************************************
Waiting for MDDs...
**********************************************

CM/DocsisCtl> [02:12:01 01/01/1970] [CmDocsisCtlThread]


BcmCmMacDomainSetsState::TmNoMddEvent:
MDD timeout during kGatherInitialPriDsMddSets

BcmCmDocsisCtlMsgACT::HandleEvent() @time=7921040 event_code=10


(kCmPriDsMddSetsNotRx)

***************************************************************

No MDD timeout ==> If no MDDs are detected on the candidate


Primary Downstream Channel, then the CM MUST abort the attempt
to utilize the current downstream channel

***************************************************************

[02:12:01 01/01/1970] [CmDocsisCtlThread]


BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) Purging DS
frequency 361000000 from current scan pass due to pre-registration restart error
[02:12:01 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) reinit MAC #35:
NoMddTimeout

[02:12:01 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::Reset:


(CmDocsisCtlThread) DefaultSnmpAgentClass::RestartPendingEvent for Vendor CM
Agent w/ BRCM Factory Support
Logging event: Lost MDD Timeout;CM-MAC=fc:4a:e9:de:ad:88;CMTS-
MAC=00:00:00:00:00:00;CM-QOS=1.1;CM-VER=3.1;
Vendor CM Agent w/ BRCM Factory Support updating ifTableLastChange.
Vendor CM Agent w/ BRCM Factory Support resetting to default state.
Vendor CM Agent w/ BRCM Factory Support destroying users...
Vendor CM Agent w/ BRCM Factory Support destroying notifies...
Vendor CM Agent w/ BRCM Factory Support destroying views...
Allowing DOCS-CABLE-DEVICE-MIB IP filters.
Vendor CM Agent w/ BRCM Factory Support deferring traps.
Received RG Event 0x80000001 State 0x1
eRouter Linux WAN Down
[02:12:01 01/01/1970] [eRouterMsgPipe] eRouterMsgPipe::UpdateIpNetToMediaEntry:
(eRouterMsgPipe) eRouter IP address:0.0.0.0
02:12:01.320 01/01/1970 (CALC) mtaCmStatusInfo() - MTA is Signaled: *NOT-
OPERATIONAL* (Stat=0x1) emtaCurState = 0.
EmtaSnmpAgent::SoftReset
Pausing trap thread
emta factory agentResetting to default state.
emta factory agent destroying users...
emta factory agent destroying notifies...
emta factory agent destroying views...
emta factory agent entering RFC-2576 Coexistence security mode.
emta factory agent entering Basic/Hybrid flow provisioning mode.
Resuming trap thread
Stopping DHCP/ToD/TFTP (client requested)...
[02:12:01 01/01/1970] [CmDocsisIpThread] BcmEcosIpHalIf::RemoveIpv6Address: (IP
Stack1 HalIf) ERROR - Failed to remove IPv6 address fe80::fe4a:e9ff:fede:ad88/64
from the stack!
[02:12:01 01/01/1970] [CmDocsisIpThread] BcmDhcpV6ClientIf::ReleaseAddresses:
(DHCPv6 ClientIf for IP Stack1) ERROR - IA state is initial; there is no address to
release.
BcmDocsis3DsMacEnableMulticastDsidForwarding 0; primary DS = 0
SCQAM DSID filter control = 0x00
OFDM DSID filter control = 0x01
Deleting DOCSIS 1.0 CoS Settings for SID 0
[02:12:01 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows:
(DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along
with associated Classifiers and PHS rules...
[02:12:01 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState:
(CmDocsisCtlThread)
[02:12:01 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Primary SID for usHwChannel 0 to 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 1
Updating US chan 8 data Profile test msg for Sid: 0x0.
Updating US chan 9 data Profile test msg for Sid: 0x0.
CM/DocsisCtl> BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=false
[02:12:02 01/01/1970] [CmDocsisCtlThread] BcmCmMultiDsHelper::PreRegDsChanChange:
target freq hz = 0
reason string = ErrorRecovery
CmInitReason = 16

Starting DS scanning...
[02:12:02 01/01/1970] [CmDocsisCtlThread] BcmCmDownstreamScan::StartScan: Starting
DS scan
Scanning 362.000 MHz PLC
Scanning 363.000 MHz PLC
CM/DocsisCtl> Scanning 364.000 MHz PLC
Scanning 365.000 MHz PLC
Scanning 366.000 MHz PLC
Scanning 367.000 MHz PLC
Scanning 368.000 MHz PLC
Scanning 369.000 MHz PLC
Scanning 370.000 MHz PLC
Scanning 371.000 MHz PLC
Scanning 372.000 MHz PLC
Scanning 373.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 374.000 MHz PLC
Scanning 375.000 MHz PLC
Scanning 376.000 MHz PLC
Scanning 377.000 MHz PLC
Scanning 378.000 MHz PLC
Scanning 379.000 MHz PLC
Scanning 380.000 MHz PLC
Scanning 381.000 MHz PLC
Scanning 382.000 MHz PLC
Scanning 383.000 MHz PLC
Scanning 384.000 MHz PLC
Scanning 385.000 MHz PLC
Scanning 386.000 MHz PLC
Scanning 387.000 MHz PLC
Scanning 388.000 MHz PLC
Scanning 389.000 MHz PLC
Scanning 390.000 MHz PLC
Scanning 391.000 MHz PLC
Scanning 392.000 MHz PLC
Scanning 393.000 MHz PLC
Scanning 394.000 MHz PLC
Scanning 395.000 MHz PLC
Scanning 396.000 MHz PLC
Scanning 397.000 MHz PLC
Scanning 398.000 MHz PLC
Scanning 399.000 MHz PLC
Scanning 400.000 MHz PLC
Scanning 401.000 MHz PLC
Scanning 402.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 403.000 MHz PLC
Scanning 404.000 MHz PLC
Scanning 405.000 MHz PLC
Scanning 406.000 MHz PLC
Scanning 407.000 MHz PLC
Scanning 408.000 MHz PLC
Scanning 409.000 MHz PLC
Scanning 410.000 MHz PLC
Scanning 411.000 MHz PLC
Scanning 412.000 MHz PLC
Scanning 413.000 MHz PLC
Scanning 414.000 MHz PLC
Scanning 415.000 MHz PLC
Scanning 416.000 MHz PLC
Scanning 417.000 MHz PLC
Scanning 418.000 MHz PLC
Scanning 419.000 MHz PLC
Scanning 420.000 MHz PLC
Scanning 421.000 MHz PLC
Scanning 422.000 MHz PLC
Scanning 423.000 MHz PLC
Scanning 424.000 MHz PLC
Scanning 425.000 MHz PLC
Scanning 426.000 MHz PLC
Scanning 427.000 MHz PLC
Scanning 428.000 MHz PLC
Scanning 429.000 MHz PLC
Scanning 430.000 MHz PLC
Scanning 431.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 432.000 MHz PLC
Scanning 433.000 MHz PLC
Scanning 434.000 MHz PLC
Scanning 435.000 MHz PLC
Scanning 436.000 MHz PLC
Scanning 437.000 MHz PLC
Scanning 438.000 MHz PLC
Scanning 439.000 MHz PLC
Scanning 440.000 MHz PLC
Scanning 441.000 MHz PLC
Scanning 442.000 MHz PLC
Scanning 443.000 MHz PLC
Scanning 444.000 MHz PLC
Scanning 445.000 MHz PLC
Scanning 446.000 MHz PLC
Scanning 447.000 MHz PLC
Scanning 448.000 MHz PLC
Scanning 449.000 MHz PLC
Scanning 450.000 MHz PLC
Scanning 451.000 MHz PLC
Scanning 452.000 MHz PLC
Scanning 453.000 MHz PLC
Scanning 454.000 MHz PLC
Scanning 455.000 MHz PLC
Scanning 456.000 MHz PLC
Scanning 457.000 MHz PLC
Scanning 458.000 MHz PLC
Scanning 459.000 MHz PLC
Scanning 460.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 461.000 MHz PLC
Scanning 462.000 MHz PLC
Scanning 463.000 MHz PLC
Scanning 464.000 MHz PLC
Scanning 465.000 MHz PLC
Scanning 466.000 MHz PLC
Scanning 467.000 MHz PLC
Scanning 468.000 MHz PLC
Scanning 469.000 MHz PLC
Scanning 470.000 MHz PLC
Scanning 471.000 MHz PLC
Scanning 472.000 MHz PLC
Scanning 473.000 MHz PLC
Scanning 474.000 MHz PLC
Scanning 475.000 MHz PLC
Scanning 476.000 MHz PLC
Scanning 477.000 MHz PLC
Scanning 478.000 MHz PLC
Scanning 479.000 MHz PLC
Scanning 480.000 MHz PLC
Scanning 481.000 MHz PLC
Scanning 482.000 MHz PLC
Scanning 483.000 MHz PLC
Scanning 484.000 MHz PLC
Scanning 485.000 MHz PLC
Scanning 486.000 MHz PLC
Scanning 487.000 MHz PLC
Scanning 488.000 MHz PLC
Scanning 489.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 490.000 MHz PLC
Scanning 491.000 MHz PLC
Scanning 492.000 MHz PLC
Scanning 493.000 MHz PLC
Scanning 494.000 MHz PLC
Scanning 495.000 MHz PLC
Scanning 496.000 MHz PLC
Scanning 497.000 MHz PLC
Scanning 498.000 MHz PLC
Scanning 499.000 MHz PLC
Scanning 500.000 MHz PLC
Scanning 501.000 MHz PLC
Scanning 502.000 MHz PLC
Scanning 503.000 MHz PLC
Scanning 504.000 MHz PLC
Scanning 505.000 MHz PLC
Scanning 506.000 MHz PLC
Scanning 507.000 MHz PLC
Scanning 508.000 MHz PLC
Scanning 509.000 MHz PLC
Scanning 510.000 MHz PLC
Scanning 511.000 MHz PLC
Scanning 512.000 MHz PLC
Scanning 513.000 MHz PLC
Scanning 514.000 MHz PLC
Scanning 515.000 MHz PLC
Scanning 516.000 MHz PLC
Scanning 517.000 MHz PLC
Scanning 518.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 519.000 MHz PLC
Scanning 520.000 MHz PLC
Scanning 521.000 MHz PLC
Scanning 522.000 MHz PLC
Scanning 523.000 MHz PLC
Scanning 524.000 MHz PLC
Scanning 525.000 MHz PLC
Scanning 526.000 MHz PLC
Scanning 527.000 MHz PLC
Scanning 528.000 MHz PLC
Scanning 529.000 MHz PLC
Scanning 530.000 MHz PLC
Scanning 531.000 MHz PLC
Scanning 532.000 MHz PLC
Scanning 533.000 MHz PLC
Scanning 534.000 MHz PLC
Scanning 535.000 MHz PLC
Scanning 536.000 MHz PLC
Scanning 537.000 MHz PLC
Scanning 538.000 MHz PLC
Scanning 539.000 MHz PLC
Scanning 540.000 MHz PLC
Scanning 541.000 MHz PLC
Scanning 542.000 MHz PLC
Scanning 543.000 MHz PLC
Scanning 544.000 MHz PLC
Scanning 545.000 MHz PLC
Scanning 546.000 MHz PLC
Scanning 547.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 548.000 MHz PLC
Scanning 549.000 MHz PLC
Scanning 550.000 MHz PLC
Scanning 551.000 MHz PLC
Scanning 552.000 MHz PLC
Scanning 553.000 MHz PLC
Scanning 554.000 MHz PLC
Scanning 555.000 MHz PLC
Scanning 556.000 MHz PLC
Scanning 557.000 MHz PLC
Scanning 558.000 MHz PLC
Scanning 559.000 MHz PLC
Scanning 560.000 MHz PLC
Scanning 561.000 MHz PLC
Scanning 562.000 MHz PLC
Scanning 563.000 MHz PLC
Scanning 564.000 MHz PLC
Scanning 565.000 MHz PLC
Scanning 566.000 MHz PLC
Scanning 567.000 MHz PLC
Scanning 568.000 MHz PLC
Scanning 569.000 MHz PLC
Scanning 570.000 MHz PLC
Scanning 571.000 MHz PLC
Scanning 572.000 MHz PLC
Scanning 573.000 MHz PLC
Scanning 574.000 MHz PLC
Scanning 575.000 MHz PLC
Scanning 576.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 577.000 MHz PLC
Scanning 578.000 MHz PLC
Scanning 579.000 MHz PLC
Scanning 580.000 MHz PLC
Scanning 581.000 MHz PLC
Scanning 582.000 MHz PLC
Scanning 583.000 MHz PLC
Scanning 584.000 MHz PLC
Scanning 585.000 MHz PLC
Scanning 586.000 MHz PLC
Scanning 587.000 MHz PLC
Scanning 588.000 MHz PLC
Scanning 589.000 MHz PLC
Scanning 590.000 MHz PLC
Scanning 591.000 MHz PLC
Scanning 592.000 MHz PLC
Scanning 593.000 MHz PLC
Scanning 594.000 MHz PLC
Scanning 595.000 MHz PLC
Scanning 596.000 MHz PLC
Scanning 597.000 MHz PLC
Scanning 598.000 MHz PLC
Scanning 599.000 MHz PLC
Scanning 600.000 MHz PLC
Scanning 601.000 MHz PLC
Scanning 602.000 MHz PLC
Scanning 603.000 MHz PLC
Scanning 604.000 MHz PLC
Scanning 605.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 606.000 MHz PLC
Scanning 607.000 MHz PLC
Scanning 608.000 MHz PLC
Scanning 609.000 MHz PLC
Scanning 610.000 MHz PLC
Scanning 611.000 MHz PLC
Scanning 612.000 MHz PLC
Scanning 613.000 MHz PLC
Scanning 614.000 MHz PLC
Scanning 615.000 MHz PLC
Scanning 616.000 MHz PLC
Scanning 617.000 MHz PLC
Scanning 618.000 MHz PLC
Scanning 619.000 MHz PLC
Scanning 620.000 MHz PLC
Scanning 621.000 MHz PLC
Scanning 622.000 MHz PLC
Scanning 623.000 MHz PLC
Scanning 624.000 MHz PLC
Scanning 625.000 MHz PLC
Scanning 626.000 MHz PLC
Scanning 627.000 MHz PLC
Scanning 628.000 MHz PLC
Scanning 629.000 MHz PLC
Scanning 630.000 MHz PLC
Scanning 631.000 MHz PLC
Scanning 632.000 MHz PLC
Scanning 633.000 MHz PLC
Scanning 634.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 635.000 MHz PLC
Scanning 636.000 MHz PLC
Scanning 637.000 MHz PLC
Scanning 638.000 MHz PLC
Scanning 639.000 MHz PLC
Scanning 640.000 MHz PLC
Scanning 641.000 MHz PLC
Scanning 642.000 MHz PLC
Scanning 643.000 MHz PLC
Scanning 644.000 MHz PLC
Scanning 645.000 MHz PLC
Scanning 646.000 MHz PLC
Scanning 647.000 MHz PLC
Scanning 648.000 MHz PLC
Scanning 649.000 MHz PLC
Scanning 650.000 MHz PLC
Scanning 651.000 MHz PLC
Scanning 652.000 MHz PLC
Scanning 653.000 MHz PLC
Scanning 654.000 MHz PLC
Scanning 655.000 MHz PLC
Scanning 656.000 MHz PLC
Scanning 657.000 MHz PLC
Scanning 658.000 MHz PLC
Scanning 659.000 MHz PLC
Scanning 660.000 MHz PLC
Scanning 661.000 MHz PLC
Scanning 662.000 MHz PLC
Scanning 663.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 664.000 MHz PLC
Scanning 665.000 MHz PLC
Scanning 666.000 MHz PLC
Scanning 667.000 MHz PLC
Scanning 668.000 MHz PLC
Scanning 669.000 MHz PLC
Scanning 670.000 MHz PLC
Scanning 671.000 MHz PLC
Scanning 672.000 MHz PLC
Scanning 673.000 MHz PLC
Scanning 674.000 MHz PLC
Scanning 675.000 MHz PLC
Scanning 676.000 MHz PLC
Scanning 677.000 MHz PLC
Scanning 678.000 MHz PLC
Scanning 679.000 MHz PLC
Scanning 680.000 MHz PLC
Scanning 681.000 MHz PLC
Scanning 682.000 MHz PLC
Scanning 683.000 MHz PLC
Scanning 684.000 MHz PLC
Scanning 685.000 MHz PLC
Scanning 686.000 MHz PLC
Scanning 687.000 MHz PLC
Scanning 688.000 MHz PLC
Scanning 689.000 MHz PLC
Scanning 690.000 MHz PLC
Scanning 691.000 MHz PLC
Scanning 692.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 693.000 MHz PLC
Scanning 694.000 MHz PLC
Scanning 695.000 MHz PLC
Scanning 696.000 MHz PLC
Scanning 697.000 MHz PLC
Scanning 698.000 MHz PLC
Scanning 699.000 MHz PLC
Scanning 700.000 MHz PLC
Scanning 701.000 MHz PLC
Scanning 702.000 MHz PLC
Scanning 703.000 MHz PLC
Scanning 704.000 MHz PLC
Scanning 705.000 MHz PLC
Scanning 706.000 MHz PLC
Scanning 707.000 MHz PLC
Scanning 708.000 MHz PLC
Scanning 709.000 MHz PLC
Scanning 710.000 MHz PLC
Scanning 711.000 MHz PLC
Scanning 712.000 MHz PLC
Scanning 713.000 MHz PLC
Scanning 714.000 MHz PLC
Scanning 715.000 MHz PLC
Scanning 716.000 MHz PLC
Scanning 717.000 MHz PLC
Scanning 718.000 MHz PLC
Scanning 719.000 MHz PLC
Scanning 720.000 MHz PLC
Scanning 721.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 722.000 MHz PLC
Scanning 723.000 MHz PLC
Scanning 724.000 MHz PLC
Scanning 725.000 MHz PLC
Scanning 726.000 MHz PLC
Scanning 727.000 MHz PLC
Scanning 728.000 MHz PLC
Scanning 729.000 MHz PLC
Scanning 730.000 MHz PLC
Scanning 731.000 MHz PLC
Scanning 732.000 MHz PLC
Scanning 733.000 MHz PLC
Scanning 734.000 MHz PLC
Scanning 735.000 MHz PLC
Scanning 736.000 MHz PLC
Scanning 737.000 MHz PLC
Scanning 738.000 MHz PLC
Scanning 739.000 MHz PLC
Scanning 740.000 MHz PLC
Scanning 741.000 MHz PLC
Scanning 742.000 MHz PLC
Scanning 743.000 MHz PLC
Scanning 744.000 MHz PLC
Scanning 745.000 MHz PLC
Scanning 746.000 MHz PLC
Scanning 747.000 MHz PLC
Scanning 748.000 MHz PLC
Scanning 749.000 MHz PLC
Scanning 750.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 751.000 MHz PLC
Scanning 752.000 MHz PLC
Scanning 753.000 MHz PLC
Scanning 754.000 MHz PLC
Scanning 755.000 MHz PLC
Scanning 756.000 MHz PLC
Scanning 757.000 MHz PLC
Scanning 758.000 MHz PLC
Scanning 759.000 MHz PLC
Scanning 760.000 MHz PLC
Scanning 761.000 MHz PLC
Scanning 762.000 MHz PLC
Scanning 763.000 MHz PLC
Scanning 764.000 MHz PLC
Scanning 765.000 MHz PLC
Scanning 766.000 MHz PLC
Scanning 767.000 MHz PLC
Scanning 768.000 MHz PLC
Scanning 769.000 MHz PLC
Scanning 770.000 MHz PLC
Scanning 771.000 MHz PLC
Scanning 772.000 MHz PLC
Scanning 773.000 MHz PLC
Scanning 774.000 MHz PLC
Scanning 775.000 MHz PLC
Scanning 776.000 MHz PLC
Scanning 777.000 MHz PLC
Scanning 778.000 MHz PLC
Scanning 779.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 780.000 MHz PLC
Scanning 781.000 MHz PLC
Scanning 782.000 MHz PLC
Scanning 783.000 MHz PLC
Scanning 784.000 MHz PLC
Scanning 785.000 MHz PLC
Scanning 786.000 MHz PLC
Scanning 787.000 MHz PLC
Scanning 788.000 MHz PLC
Scanning 789.000 MHz PLC
Scanning 790.000 MHz PLC
Scanning 791.000 MHz PLC
Scanning 792.000 MHz PLC
Scanning 793.000 MHz PLC
Scanning 794.000 MHz PLC
Scanning 795.000 MHz PLC
Scanning 796.000 MHz PLC
Scanning 797.000 MHz PLC
Scanning 798.000 MHz PLC
Scanning 799.000 MHz PLC
Scanning 800.000 MHz PLC
Scanning 801.000 MHz PLC
Scanning 802.000 MHz PLC
Scanning 803.000 MHz PLC
Scanning 804.000 MHz PLC
Scanning 805.000 MHz PLC
Scanning 806.000 MHz PLC
Scanning 807.000 MHz PLC
Scanning 808.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 809.000 MHz PLC
Scanning 810.000 MHz PLC
Scanning 811.000 MHz PLC
Scanning 812.000 MHz PLC
Scanning 813.000 MHz PLC
Scanning 814.000 MHz PLC
Scanning 815.000 MHz PLC
Scanning 816.000 MHz PLC
Scanning 817.000 MHz PLC
Scanning 818.000 MHz PLC
Scanning 819.000 MHz PLC
Scanning 820.000 MHz PLC
Scanning 821.000 MHz PLC
Scanning 822.000 MHz PLC
Scanning 823.000 MHz PLC
Scanning 824.000 MHz PLC
Scanning 825.000 MHz PLC
Scanning 826.000 MHz PLC
Scanning 827.000 MHz PLC
Scanning 828.000 MHz PLC
Scanning 829.000 MHz PLC
Scanning 830.000 MHz PLC
Scanning 831.000 MHz PLC
Scanning 832.000 MHz PLC
Scanning 833.000 MHz PLC
Scanning 834.000 MHz PLC
Scanning 835.000 MHz PLC
Scanning 836.000 MHz PLC
Scanning 837.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 838.000 MHz PLC
Scanning 839.000 MHz PLC
Scanning 840.000 MHz PLC
Scanning 841.000 MHz PLC
Scanning 842.000 MHz PLC
Scanning 843.000 MHz PLC
Scanning 844.000 MHz PLC
Scanning 845.000 MHz PLC
Scanning 846.000 MHz PLC
Scanning 847.000 MHz PLC
Scanning 848.000 MHz PLC
Scanning 849.000 MHz PLC
Scanning 850.000 MHz PLC
Scanning 851.000 MHz PLC
Scanning 852.000 MHz PLC
Scanning 853.000 MHz PLC
Scanning 854.000 MHz PLC
Scanning 855.000 MHz PLC
Scanning 856.000 MHz PLC
Scanning 857.000 MHz PLC
Scanning 858.000 MHz PLC
Scanning 859.000 MHz PLC
Scanning 860.000 MHz PLC
Scanning 861.000 MHz PLC
Scanning 862.000 MHz PLC
Scanning 863.000 MHz PLC
Scanning 864.000 MHz PLC
Scanning 865.000 MHz PLC
Scanning 866.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 867.000 MHz PLC
Scanning 868.000 MHz PLC
Scanning 869.000 MHz PLC
Scanning 870.000 MHz PLC
Scanning 871.000 MHz PLC
Scanning 872.000 MHz PLC
Scanning 873.000 MHz PLC
Scanning 874.000 MHz PLC
Scanning 875.000 MHz PLC
Scanning 876.000 MHz PLC
Scanning 877.000 MHz PLC
Scanning 878.000 MHz PLC
Scanning 879.000 MHz PLC
Scanning 880.000 MHz PLC
Scanning 881.000 MHz PLC
Scanning 882.000 MHz PLC
Scanning 883.000 MHz PLC
Scanning 884.000 MHz PLC
Scanning 885.000 MHz PLC
Scanning 886.000 MHz PLC
Scanning 887.000 MHz PLC
Scanning 888.000 MHz PLC
Scanning 889.000 MHz PLC
Scanning 890.000 MHz PLC
Scanning 891.000 MHz PLC
Scanning 892.000 MHz PLC
Scanning 893.000 MHz PLC
Scanning 894.000 MHz PLC
Scanning 895.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 896.000 MHz PLC
Scanning 897.000 MHz PLC locked PLC
[02:12:56 01/01/1970] [CmDocsisCtlThread] BcmCmDsChanOfdm::DsLockOk:
(BcmCmDsChanOfdm) hwRxId=32 freq=0 dcid=0 PLC found
[02:12:56 01/01/1970] [CmDocsisCtlThread] BcmCmDsChanOfdm::StartOcdDpdGathering:
(BcmCmDsChanOfdm) starting OCD/DPD gathering on PLC
OCD/DPD Filtering being configured for hwRxId=32 on FilCh=0[PLC=0/ProfA=1] ->
filter enable = false. TimeMs=0
[02:12:56 01/01/1970] [CmDocsisCtlThread] BcmCmDsChanOfdm::OcdSetsRx:
(BcmCmDsChanOfdm) hwRxId=32 dcid=0
[02:12:56 01/01/1970] [CmDocsisCtlThread] BcmCmDsChanOfdm::DpdSetsRx:
(BcmCmDsChanOfdm) Received DPD on hwRxId=32 dcid=0 for assigned Profile NCP
[02:12:56 01/01/1970] [CmDocsisCtlThread] BcmCmDsChanOfdm::DpdSetsRx:
(BcmCmDsChanOfdm) Received DPD on hwRxId=32 dcid=0 for assigned Profile A
[02:12:56 01/01/1970] [CmDocsisCtlThread]
BcmCmDsChanOfdm::DetectOcdDpdGatheringPlcDone: (BcmCmDsChanOfdm) hwRxId=32 dcid=0
OCD/DPD gathered via PLC. install OCD settings.
OCD/DPD Filtering being configured for hwRxId=32 on FilCh=0[PLC=0/ProfA=1] ->
filter enable = true. TimeMs=201
[02:12:56 01/01/1970] [CmDocsisCtlThread] BcmCmDsChanOfdm::OcdInstallOk:
(BcmCmDsChanOfdm) hwRxId=32 dcid=159 OCD installed.
[02:12:56 01/01/1970] [CmDocsisCtlThread] BcmCmDsOfdmProfileState::InstallDpdSets:
HwRxId=32: installing DPD for profile NCP
CM/DocsisCtl> [02:12:57 01/01/1970] [CmDocsisCtlThread]
BcmCmDsOfdmProfileState::InstallDpdSets: HwRxId=32: installing DPD for profile A
Ofdm0: profile0 LOCK in 2 ms!
[02:12:57 01/01/1970] [CmDocsisCtlThread] BcmCmDsOfdmProfileState::FecLockOk:
hwRxId=32 dcid=159 profId=255 (NCP)
CM/DocsisCtl> [02:12:58 01/01/1970] [CmDocsisCtlThread]
BcmCmDsOfdmProfileState::FecLockOk: hwRxId=32 dcid=159 profId=0 (A)
[02:12:58 01/01/1970] [CmDocsisCtlThread]
BcmCmMacDomainSetsState::StartDsMacMddInit:
**********************************************
Waiting for MDDs...
**********************************************
CM/DocsisCtl> [02:13:04 01/01/1970] [CmDocsisCtlThread]
BcmCmMacDomainSetsState::TmNoMddEvent:
MDD timeout during kGatherInitialPriDsMddSets

BcmCmDocsisCtlMsgACT::HandleEvent() @time=7984040 event_code=10


(kCmPriDsMddSetsNotRx)

***************************************************************

No MDD timeout ==> If no MDDs are detected on the candidate


Primary Downstream Channel, then the CM MUST abort the attempt
to utilize the current downstream channel

***************************************************************

[02:13:04 01/01/1970] [CmDocsisCtlThread]


BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) Purging DS
frequency 897000000 from current scan pass due to pre-registration restart error
[02:13:04 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) reinit MAC #36:
NoMddTimeout

[02:13:04 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::Reset:


(CmDocsisCtlThread) DefaultSnmpAgentClass::RestartPendingEvent for Vendor CM
Agent w/ BRCM Factory Support
Logging event: Lost MDD Timeout;CM-MAC=fc:4a:e9:de:ad:88;CMTS-
MAC=00:00:00:00:00:00;CM-QOS=1.1;CM-VER=3.1;
Vendor CM Agent w/ BRCM Factory Support updating ifTableLastChange.
Vendor CM Agent w/ BRCM Factory Support resetting to default state.
Vendor CM Agent w/ BRCM Factory Support destroying users...
Vendor CM Agent w/ BRCM Factory Support destroying notifies...
Vendor CM Agent w/ BRCM Factory Support destroying views...
Allowing DOCS-CABLE-DEVICE-MIB IP filters.
Vendor CM Agent w/ BRCM Factory Support deferring traps.
Received RG Event 0x80000001 State 0x1
eRouter Linux WAN Down
[02:13:04 01/01/1970] [eRouterMsgPipe] eRouterMsgPipe::UpdateIpNetToMediaEntry:
(eRouterMsgPipe) eRouter IP address:0.0.0.0
02:13:04.320 01/01/1970 (CALC) mtaCmStatusInfo() - MTA is Signaled: *NOT-
OPERATIONAL* (Stat=0x1) emtaCurState = 0.
EmtaSnmpAgent::SoftReset
Pausing trap thread
emta factory agentResetting to default state.
emta factory agent destroying users...
emta factory agent destroying notifies...
emta factory agent destroying views...
emta factory agent entering RFC-2576 Coexistence security mode.
emta factory agent entering Basic/Hybrid flow provisioning mode.
Resuming trap thread
Stopping DHCP/ToD/TFTP (client requested)...
[02:13:04 01/01/1970] [CmDocsisIpThread] BcmEcosIpHalIf::RemoveIpv6Address: (IP
Stack1 HalIf) ERROR - Failed to remove IPv6 address fe80::fe4a:e9ff:fede:ad88/64
from the stack!
[02:13:04 01/01/1970] [CmDocsisIpThread] BcmDhcpV6ClientIf::ReleaseAddresses:
(DHCPv6 ClientIf for IP Stack1) ERROR - IA state is initial; there is no address to
release.
BcmDocsis3DsMacEnableMulticastDsidForwarding 0; primary DS = 0
SCQAM DSID filter control = 0x00
OFDM DSID filter control = 0x01
Deleting DOCSIS 1.0 CoS Settings for SID 0
[02:13:04 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows:
(DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along
with associated Classifiers and PHS rules...
[02:13:04 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState:
(CmDocsisCtlThread)
[02:13:04 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Primary SID for usHwChannel 0 to 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 1
Updating US chan 8 data Profile test msg for Sid: 0x0.
Updating US chan 9 data Profile test msg for Sid: 0x0.
CM/DocsisCtl> BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=false
[02:13:05 01/01/1970] [CmDocsisCtlThread] BcmCmMultiDsHelper::PreRegDsChanChange:
target freq hz = 0
reason string = ErrorRecovery
CmInitReason = 16

Starting DS scanning...
[02:13:05 01/01/1970] [CmDocsisCtlThread] BcmCmDownstreamScan::StartScan: Starting
DS scan
Scanning 898.000 MHz PLC
Scanning 899.000 MHz PLC
CM/DocsisCtl> Scanning 900.000 MHz PLC
Scanning 901.000 MHz PLC
Scanning 902.000 MHz PLC
Scanning 903.000 MHz PLC
Scanning 904.000 MHz PLC
Scanning 905.000 MHz PLC
Scanning 906.000 MHz PLC
Scanning 907.000 MHz PLC
Scanning 908.000 MHz PLC
Scanning 909.000 MHz PLC
Scanning 910.000 MHz PLC
Scanning 911.000 MHz PLC
Scanning 912.000 MHz PLC
Scanning 913.000 MHz PLC
Scanning 914.000 MHz PLC
Scanning 915.000 MHz PLC
Scanning 916.000 MHz PLC
Scanning 917.000 MHz PLC
Scanning 918.000 MHz PLC
Scanning 919.000 MHz PLC
Scanning 920.000 MHz PLC
Scanning 921.000 MHz PLC
Scanning 922.000 MHz PLC
Scanning 923.000 MHz PLC
Scanning 924.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 925.000 MHz PLC
Scanning 926.000 MHz PLC
Scanning 927.000 MHz PLC
Scanning 928.000 MHz PLC
Scanning 929.000 MHz PLC
Scanning 930.000 MHz PLC
Scanning 931.000 MHz PLC
Scanning 932.000 MHz PLC
Scanning 933.000 MHz PLC
Scanning 934.000 MHz PLC
Scanning 935.000 MHz PLC
Scanning 936.000 MHz PLC
Scanning 937.000 MHz PLC
Scanning 938.000 MHz PLC
Scanning 939.000 MHz PLC
Scanning 940.000 MHz PLC
Scanning 941.000 MHz PLC
Scanning 942.000 MHz PLC
Scanning 943.000 MHz PLC
Scanning 944.000 MHz PLC
Scanning 945.000 MHz PLC
Scanning 946.000 MHz PLC
Scanning 947.000 MHz PLC
Scanning 948.000 MHz PLC
Scanning 949.000 MHz PLC
Scanning 950.000 MHz PLC
Scanning 951.000 MHz PLC
Scanning 952.000 MHz PLC
Scanning 953.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 954.000 MHz PLC
Scanning 955.000 MHz PLC
Scanning 956.000 MHz PLC
Scanning 957.000 MHz PLC
Scanning 958.000 MHz PLC
Scanning 959.000 MHz PLC
Scanning 960.000 MHz PLC
Scanning 961.000 MHz PLC
Scanning 962.000 MHz PLC
Scanning 963.000 MHz PLC
Scanning 964.000 MHz PLC
Scanning 965.000 MHz PLC
Scanning 966.000 MHz PLC
Scanning 967.000 MHz PLC
Scanning 968.000 MHz PLC
Scanning 969.000 MHz PLC
Scanning 970.000 MHz PLC
Scanning 971.000 MHz PLC
Scanning 972.000 MHz PLC
Scanning 973.000 MHz PLC
Scanning 974.000 MHz PLC
Scanning 975.000 MHz PLC
Scanning 976.000 MHz PLC
Scanning 977.000 MHz PLC
Scanning 978.000 MHz PLC
Scanning 979.000 MHz PLC
Scanning 980.000 MHz PLC
Scanning 981.000 MHz PLC
Scanning 982.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 983.000 MHz PLC
Scanning 984.000 MHz PLC
Scanning 985.000 MHz PLC
Scanning 986.000 MHz PLC
Scanning 987.000 MHz PLC
Scanning 988.000 MHz PLC
Scanning 989.000 MHz PLC
Scanning 990.000 MHz PLC
Scanning 991.000 MHz PLC
Scanning 992.000 MHz PLC
Scanning 993.000 MHz PLC
Scanning 994.000 MHz PLC
Scanning 995.000 MHz PLC
Scanning 996.000 MHz PLC
Scanning 997.000 MHz PLC
Scanning 998.000 MHz PLC
Scanning 999.000 MHz PLC
Scanning 1000.000 MHz PLC
Scanning 1001.000 MHz PLC
Scanning 1002.000 MHz PLC
Scanning 1003.000 MHz PLC
Scanning 1004.000 MHz PLC
Scanning 1005.000 MHz PLC
Scanning 1006.000 MHz PLC
Scanning 1007.000 MHz PLC
Scanning 1008.000 MHz PLC
Scanning 1009.000 MHz PLC
Scanning 1010.000 MHz PLC
Scanning 1011.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 1012.000 MHz PLC
Scanning 1013.000 MHz PLC
Scanning 1014.000 MHz PLC
Scanning 1015.000 MHz PLC
Scanning 1016.000 MHz PLC
Scanning 1017.000 MHz PLC
Scanning 1018.000 MHz PLC
Scanning 1019.000 MHz PLC
Scanning 1020.000 MHz PLC
Scanning 1021.000 MHz PLC
Scanning 1022.000 MHz PLC
Scanning 1023.000 MHz PLC
Scanning 1024.000 MHz PLC
Scanning 1025.000 MHz PLC
Scanning 1026.000 MHz PLC
Scanning 1027.000 MHz PLC
Scanning 1028.000 MHz PLC
Scanning 1029.000 MHz PLC
Scanning 1030.000 MHz PLC
Scanning 1031.000 MHz PLC
Scanning 1032.000 MHz PLC
Scanning 1033.000 MHz PLC
Scanning 1034.000 MHz PLC
Scanning 1035.000 MHz PLC
Scanning 1036.000 MHz PLC
Scanning 1037.000 MHz PLC
Scanning 1038.000 MHz PLC
Scanning 1039.000 MHz PLC
Scanning 1040.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 1041.000 MHz PLC
Scanning 1042.000 MHz PLC
Scanning 1043.000 MHz PLC
Scanning 1044.000 MHz PLC
Scanning 1045.000 MHz PLC
Scanning 1046.000 MHz PLC
Scanning 1047.000 MHz PLC
Scanning 1048.000 MHz PLC
Scanning 1049.000 MHz PLC
Scanning 1050.000 MHz PLC
Scanning 1051.000 MHz PLC
Scanning 1052.000 MHz PLC
Scanning 1053.000 MHz PLC
Scanning 1054.000 MHz PLC
Scanning 1055.000 MHz PLC
Scanning 1056.000 MHz PLC
Scanning 1057.000 MHz PLC
Scanning 1058.000 MHz PLC
Scanning 1059.000 MHz PLC
Scanning 1060.000 MHz PLC
Scanning 1061.000 MHz PLC
Scanning 1062.000 MHz PLC
Scanning 1063.000 MHz PLC
Scanning 1064.000 MHz PLC
Scanning 1065.000 MHz PLC
Scanning 1066.000 MHz PLC
Scanning 1067.000 MHz PLC
Scanning 1068.000 MHz PLC
Scanning 1069.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 1070.000 MHz PLC
Scanning 1071.000 MHz PLC
Scanning 1072.000 MHz PLC
Scanning 1073.000 MHz PLC
Scanning 1074.000 MHz PLC
Scanning 1075.000 MHz PLC
Scanning 1076.000 MHz PLC
Scanning 1077.000 MHz PLC
Scanning 1078.000 MHz PLC
Scanning 1079.000 MHz PLC
Scanning 1080.000 MHz PLC
Scanning 1081.000 MHz PLC
Scanning 1082.000 MHz PLC
Scanning 1083.000 MHz PLC
Scanning 1084.000 MHz PLC
Scanning 1085.000 MHz PLC
Scanning 1086.000 MHz PLC
Scanning 1087.000 MHz PLC
Scanning 1088.000 MHz PLC
Scanning 1089.000 MHz PLC
Scanning 1090.000 MHz PLC
Scanning 1091.000 MHz PLC
Scanning 1092.000 MHz PLC
Scanning 1093.000 MHz PLC
Scanning 1094.000 MHz PLC
Scanning 1095.000 MHz PLC
Scanning 1096.000 MHz PLC
Scanning 1097.000 MHz PLC
Scanning 1098.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 1099.000 MHz PLC
Scanning 1100.000 MHz PLC
Scanning 1101.000 MHz PLC
Scanning 1102.000 MHz PLC
Scanning 1103.000 MHz PLC
Scanning 1104.000 MHz PLC
Scanning 1105.000 MHz PLC
Scanning 1106.000 MHz PLC
Scanning 1107.000 MHz PLC
Scanning 1108.000 MHz PLC
Scanning 1109.000 MHz PLC
Scanning 1110.000 MHz PLC
Scanning 1111.000 MHz PLC
Scanning 1112.000 MHz PLC
Scanning 1113.000 MHz PLC
Scanning 1114.000 MHz PLC
Scanning 1115.000 MHz PLC
Scanning 1116.000 MHz PLC
Scanning 1117.000 MHz PLC
Scanning 1118.000 MHz PLC
Scanning 1119.000 MHz PLC
Scanning 1120.000 MHz PLC
Scanning 1121.000 MHz PLC
Scanning 1122.000 MHz PLC
Scanning 1123.000 MHz PLC
Scanning 1124.000 MHz PLC
Scanning 1125.000 MHz PLC
Scanning 1126.000 MHz PLC
Scanning 1127.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 1128.000 MHz PLC
Scanning 1129.000 MHz PLC
Scanning 1130.000 MHz PLC
Scanning 1131.000 MHz PLC
Scanning 1132.000 MHz PLC
Scanning 1133.000 MHz PLC
Scanning 1134.000 MHz PLC
Scanning 1135.000 MHz PLC
Scanning 1136.000 MHz PLC
Scanning 1137.000 MHz PLC
Scanning 1138.000 MHz PLC
Scanning 1139.000 MHz PLC
Scanning 1140.000 MHz PLC
Scanning 1141.000 MHz PLC
Scanning 1142.000 MHz PLC
Scanning 1143.000 MHz PLC
Scanning 1144.000 MHz PLC
Scanning 1145.000 MHz PLC
Scanning 1146.000 MHz PLC
Scanning 1147.000 MHz PLC
Scanning 1148.000 MHz PLC
Scanning 1149.000 MHz PLC
Scanning 1150.000 MHz PLC
Scanning 1151.000 MHz PLC
Scanning 1152.000 MHz PLC
Scanning 1153.000 MHz PLC
Scanning 1154.000 MHz PLC
Scanning 1155.000 MHz PLC
Scanning 1156.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 1157.000 MHz PLC
Scanning 1158.000 MHz PLC
Scanning 1159.000 MHz PLC
Scanning 1160.000 MHz PLC
Scanning 1161.000 MHz PLC
Scanning 1162.000 MHz PLC
Scanning 1163.000 MHz PLC
Scanning 1164.000 MHz PLC
Scanning 1165.000 MHz PLC
Scanning 1166.000 MHz PLC
Scanning 1167.000 MHz PLC
Scanning 1168.000 MHz PLC
Scanning 1169.000 MHz PLC
Scanning 1170.000 MHz PLC
Scanning 1171.000 MHz PLC
Scanning 1172.000 MHz PLC
Scanning 1173.000 MHz PLC
Scanning 1174.000 MHz PLC
Scanning 1175.000 MHz PLC
Scanning 1176.000 MHz PLC
Scanning 1177.000 MHz PLC
Scanning 1178.000 MHz PLC
Scanning 1179.000 MHz PLC
Scanning 1180.000 MHz PLC
Scanning 1181.000 MHz PLC
Scanning 1182.000 MHz PLC
Scanning 1183.000 MHz PLC
Scanning 1184.000 MHz PLC
Scanning 1185.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 1186.000 MHz PLC
Scanning 1187.000 MHz PLC
Scanning 1188.000 MHz PLC
Scanning 1189.000 MHz PLC
Scanning 1190.000 MHz PLC
Scanning 1191.000 MHz PLC
Scanning 1192.000 MHz PLC
Scanning 1193.000 MHz PLC
Scanning 1194.000 MHz PLC
Scanning 1195.000 MHz PLC
Scanning 1196.000 MHz PLC
Scanning 1197.000 MHz PLC
Scanning 1198.000 MHz PLC
Scanning 1199.000 MHz PLC
Scanning 1200.000 MHz PLC
Scanning 1201.000 MHz PLC
Scanning 1202.000 MHz PLC
Scanning 1203.000 MHz PLC
Scanning 1204.000 MHz PLC
Scanning 1205.000 MHz PLC
Scanning 1206.000 MHz PLC
Scanning 1207.000 MHz PLC
Scanning 1208.000 MHz PLC
Scanning 1209.000 MHz PLC
Scanning 1210.000 MHz PLC
Scanning 1211.000 MHz PLC
Scanning 1212.000 MHz PLC
Scanning 1213.000 MHz PLC
Scanning 1214.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 1215.000 MHz PLC
Scanning 1216.000 MHz PLC
Scanning 1217.000 MHz PLC
Scanning 1218.000 MHz PLC
Scanning 999.000 MHz SC-QAM (Annex B(STD))
Scanning 993.000 MHz SC-QAM (Annex B(STD))
Scanning 987.000 MHz SC-QAM (Annex B(STD))
Scanning 981.000 MHz SC-QAM (Annex B(STD))
Scanning 975.000 MHz SC-QAM (Annex B(STD))
Scanning 969.000 MHz SC-QAM (Annex B(STD))
Scanning 963.000 MHz SC-QAM (Annex B(STD))
Scanning 957.000 MHz SC-QAM (Annex B(STD))
Scanning 951.000 MHz SC-QAM (Annex B(STD))
Scanning 945.000 MHz SC-QAM (Annex B(STD))
Scanning 939.000 MHz SC-QAM (Annex B(STD))
Scanning 933.000 MHz SC-QAM (Annex B(STD))
Scanning 927.000 MHz SC-QAM (Annex B(STD))
Scanning 921.000 MHz SC-QAM (Annex B(STD))
Scanning 915.000 MHz SC-QAM (Annex B(STD))
Scanning 909.000 MHz SC-QAM (Annex B(STD))
Scanning 903.000 MHz SC-QAM (Annex B(STD))
Scanning 897.000 MHz purged (Annex B(STD))
Scanning 891.000 MHz SC-QAM (Annex B(STD))
Scanning 885.000 MHz SC-QAM (Annex B(STD))
Scanning 879.000 MHz SC-QAM (Annex B(STD))
Scanning 873.000 MHz SC-QAM (Annex B(STD))
Scanning 867.000 MHz SC-QAM (Annex B(STD))
Scanning 861.000 MHz SC-QAM (Annex B(STD))
Scanning 855.000 MHz SC-QAM (Annex B(STD))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 849.000 MHz SC-QAM (Annex B(STD))
Scanning 843.000 MHz SC-QAM (Annex B(STD))
Scanning 837.000 MHz SC-QAM (Annex B(STD))
Scanning 831.000 MHz SC-QAM (Annex B(STD))
Scanning 825.000 MHz SC-QAM (Annex B(STD))
Scanning 819.000 MHz SC-QAM (Annex B(STD))
Scanning 813.000 MHz SC-QAM (Annex B(STD))
Scanning 807.000 MHz SC-QAM (Annex B(STD))
Scanning 801.000 MHz SC-QAM (Annex B(STD))
Scanning 795.000 MHz SC-QAM (Annex B(STD))
Scanning 789.000 MHz SC-QAM (Annex B(STD))
Scanning 783.000 MHz SC-QAM (Annex B(STD))
Scanning 777.000 MHz SC-QAM (Annex B(STD))
Scanning 771.000 MHz SC-QAM (Annex B(STD))
Scanning 765.000 MHz SC-QAM (Annex B(STD))
Scanning 759.000 MHz SC-QAM (Annex B(STD))
Scanning 753.000 MHz SC-QAM (Annex B(STD))
Scanning 747.000 MHz SC-QAM (Annex B(STD))
Scanning 741.000 MHz SC-QAM (Annex B(STD))
Scanning 735.000 MHz SC-QAM (Annex B(STD))
Scanning 729.000 MHz SC-QAM (Annex B(STD))
Scanning 723.000 MHz SC-QAM (Annex B(STD))
Scanning 717.000 MHz SC-QAM (Annex B(STD))
Scanning 711.000 MHz SC-QAM (Annex B(STD))
Scanning 705.000 MHz SC-QAM (Annex B(STD))
Scanning 699.000 MHz SC-QAM (Annex B(STD))
Scanning 693.000 MHz SC-QAM (Annex B(STD))
Scanning 687.000 MHz SC-QAM (Annex B(STD))
Scanning 681.000 MHz SC-QAM (Annex B(STD))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 675.000 MHz SC-QAM (Annex B(STD))
Scanning 669.000 MHz SC-QAM (Annex B(STD))
Scanning 663.000 MHz SC-QAM (Annex B(STD))
Scanning 657.000 MHz SC-QAM (Annex B(STD))
Scanning 651.000 MHz SC-QAM (Annex B(STD))
Scanning 645.000 MHz SC-QAM (Annex B(STD))
Scanning 639.000 MHz SC-QAM (Annex B(STD))
Scanning 633.000 MHz SC-QAM (Annex B(STD))
Scanning 627.000 MHz SC-QAM (Annex B(STD))
Scanning 621.000 MHz SC-QAM (Annex B(STD))
Scanning 615.000 MHz SC-QAM (Annex B(STD))
Scanning 609.000 MHz SC-QAM (Annex B(STD))
Scanning 603.000 MHz SC-QAM (Annex B(STD))
Scanning 597.000 MHz SC-QAM (Annex B(STD))
Scanning 591.000 MHz SC-QAM (Annex B(STD))
Scanning 585.000 MHz SC-QAM (Annex B(STD))
Scanning 579.000 MHz SC-QAM (Annex B(STD))
Scanning 573.000 MHz SC-QAM (Annex B(STD))
Scanning 567.000 MHz SC-QAM (Annex B(STD))
Scanning 561.000 MHz SC-QAM (Annex B(STD))
Scanning 555.000 MHz SC-QAM (Annex B(STD))
Scanning 549.000 MHz SC-QAM (Annex B(STD))
Scanning 543.000 MHz SC-QAM (Annex B(STD))
Scanning 537.000 MHz SC-QAM (Annex B(STD))
Scanning 531.000 MHz SC-QAM (Annex B(STD))
Scanning 525.000 MHz SC-QAM (Annex B(STD))
Scanning 519.000 MHz SC-QAM (Annex B(STD))
Scanning 513.000 MHz SC-QAM (Annex B(STD))
Scanning 507.000 MHz SC-QAM (Annex B(STD))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 501.000 MHz SC-QAM (Annex B(STD))
Scanning 495.000 MHz SC-QAM (Annex B(STD))
Scanning 489.000 MHz SC-QAM (Annex B(STD))
Scanning 483.000 MHz SC-QAM (Annex B(STD))
Scanning 477.000 MHz SC-QAM (Annex B(STD))
Scanning 471.000 MHz SC-QAM (Annex B(STD))
Scanning 465.000 MHz SC-QAM (Annex B(STD))
Scanning 459.000 MHz SC-QAM (Annex B(STD))
Scanning 453.000 MHz SC-QAM (Annex B(STD))
Scanning 447.000 MHz SC-QAM (Annex B(STD))
Scanning 441.000 MHz SC-QAM (Annex B(STD))
Scanning 435.000 MHz SC-QAM (Annex B(STD))
Scanning 429.000 MHz SC-QAM (Annex B(STD))
Scanning 423.000 MHz SC-QAM (Annex B(STD))
Scanning 417.000 MHz SC-QAM (Annex B(STD))
Scanning 411.000 MHz SC-QAM (Annex B(STD))
Scanning 405.000 MHz SC-QAM (Annex B(STD))
Scanning 399.000 MHz SC-QAM (Annex B(STD))
Scanning 393.000 MHz SC-QAM (Annex B(STD))
Scanning 387.000 MHz SC-QAM (Annex B(STD))
Scanning 381.000 MHz SC-QAM (Annex B(STD))
Scanning 375.000 MHz SC-QAM (Annex B(STD))
Scanning 369.000 MHz SC-QAM (Annex B(STD))
Scanning 363.000 MHz SC-QAM (Annex B(STD))
Scanning 357.000 MHz SC-QAM (Annex B(STD))
Scanning 351.000 MHz SC-QAM (Annex B(STD))
Scanning 345.000 MHz SC-QAM (Annex B(STD))
Scanning 339.000 MHz SC-QAM (Annex B(STD))
Scanning 333.000 MHz SC-QAM (Annex B(STD))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 327.000 MHz SC-QAM (Annex B(STD))
Scanning 321.000 MHz SC-QAM (Annex B(STD))
Scanning 315.000 MHz SC-QAM (Annex B(STD))
Scanning 309.000 MHz SC-QAM (Annex B(STD))
Scanning 303.000 MHz SC-QAM (Annex B(STD))
Scanning 297.000 MHz SC-QAM (Annex B(STD))
Scanning 291.000 MHz SC-QAM (Annex B(STD))
Scanning 285.000 MHz SC-QAM (Annex B(STD))
Scanning 279.000 MHz SC-QAM (Annex B(STD))
Scanning 273.000 MHz SC-QAM (Annex B(STD))
Scanning 267.000 MHz SC-QAM (Annex B(STD))
Scanning 261.000 MHz SC-QAM (Annex B(STD))
Scanning 997.750 MHz SC-QAM (Annex B(HRC))
Scanning 991.750 MHz SC-QAM (Annex B(HRC))
Scanning 985.750 MHz SC-QAM (Annex B(HRC))
Scanning 979.750 MHz SC-QAM (Annex B(HRC))
Scanning 973.750 MHz SC-QAM (Annex B(HRC))
Scanning 967.750 MHz SC-QAM (Annex B(HRC))
Scanning 961.750 MHz SC-QAM (Annex B(HRC))
Scanning 955.750 MHz SC-QAM (Annex B(HRC))
Scanning 949.750 MHz SC-QAM (Annex B(HRC))
Scanning 943.750 MHz SC-QAM (Annex B(HRC))
Scanning 937.750 MHz SC-QAM (Annex B(HRC))
Scanning 931.750 MHz SC-QAM (Annex B(HRC))
Scanning 925.750 MHz SC-QAM (Annex B(HRC))
Scanning 919.750 MHz SC-QAM (Annex B(HRC))
Scanning 913.750 MHz SC-QAM (Annex B(HRC))
Scanning 907.750 MHz SC-QAM (Annex B(HRC))
Scanning 901.750 MHz SC-QAM (Annex B(HRC))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 895.750 MHz SC-QAM (Annex B(HRC))
Scanning 889.750 MHz SC-QAM (Annex B(HRC))
Scanning 883.750 MHz SC-QAM (Annex B(HRC))
Scanning 877.750 MHz SC-QAM (Annex B(HRC))
Scanning 871.750 MHz SC-QAM (Annex B(HRC))
Scanning 865.750 MHz SC-QAM (Annex B(HRC))
Scanning 859.750 MHz SC-QAM (Annex B(HRC))
Scanning 853.750 MHz SC-QAM (Annex B(HRC))
Scanning 847.750 MHz SC-QAM (Annex B(HRC))
Scanning 841.750 MHz SC-QAM (Annex B(HRC))
Scanning 835.750 MHz SC-QAM (Annex B(HRC))
Scanning 829.750 MHz SC-QAM (Annex B(HRC))
Scanning 823.750 MHz SC-QAM (Annex B(HRC))
Scanning 817.750 MHz SC-QAM (Annex B(HRC))
Scanning 811.750 MHz SC-QAM (Annex B(HRC))
Scanning 805.750 MHz SC-QAM (Annex B(HRC))
Scanning 799.750 MHz SC-QAM (Annex B(HRC))
Scanning 793.750 MHz SC-QAM (Annex B(HRC))
Scanning 787.750 MHz SC-QAM (Annex B(HRC))
Scanning 781.750 MHz SC-QAM (Annex B(HRC))
Scanning 775.750 MHz SC-QAM (Annex B(HRC))
Scanning 769.750 MHz SC-QAM (Annex B(HRC))
Scanning 763.750 MHz SC-QAM (Annex B(HRC))
Scanning 757.750 MHz SC-QAM (Annex B(HRC))
Scanning 751.750 MHz SC-QAM (Annex B(HRC))
Scanning 745.750 MHz SC-QAM (Annex B(HRC))
Scanning 739.750 MHz SC-QAM (Annex B(HRC))
Scanning 733.750 MHz SC-QAM (Annex B(HRC))
Scanning 727.750 MHz SC-QAM (Annex B(HRC))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 721.750 MHz SC-QAM (Annex B(HRC))
Scanning 715.750 MHz SC-QAM (Annex B(HRC))
Scanning 709.750 MHz SC-QAM (Annex B(HRC))
Scanning 703.750 MHz SC-QAM (Annex B(HRC))
Scanning 697.750 MHz SC-QAM (Annex B(HRC))
Scanning 691.750 MHz SC-QAM (Annex B(HRC))
Scanning 685.750 MHz SC-QAM (Annex B(HRC))
Scanning 679.750 MHz SC-QAM (Annex B(HRC))
Scanning 673.750 MHz SC-QAM (Annex B(HRC))
Scanning 667.750 MHz SC-QAM (Annex B(HRC))
Scanning 661.750 MHz SC-QAM (Annex B(HRC))
Scanning 655.750 MHz SC-QAM (Annex B(HRC))
Scanning 649.750 MHz SC-QAM (Annex B(HRC))
Scanning 643.750 MHz SC-QAM (Annex B(HRC))
Scanning 637.750 MHz SC-QAM (Annex B(HRC))
Scanning 631.750 MHz SC-QAM (Annex B(HRC))
Scanning 625.750 MHz SC-QAM (Annex B(HRC))
Scanning 619.750 MHz SC-QAM (Annex B(HRC))
Scanning 613.750 MHz SC-QAM (Annex B(HRC))
Scanning 607.750 MHz SC-QAM (Annex B(HRC))
Scanning 601.750 MHz SC-QAM (Annex B(HRC))
Scanning 595.750 MHz SC-QAM (Annex B(HRC))
Scanning 589.750 MHz SC-QAM (Annex B(HRC))
Scanning 583.750 MHz SC-QAM (Annex B(HRC))
Scanning 577.750 MHz SC-QAM (Annex B(HRC))
Scanning 571.750 MHz SC-QAM (Annex B(HRC))
Scanning 565.750 MHz SC-QAM (Annex B(HRC))
Scanning 559.750 MHz SC-QAM (Annex B(HRC))
Scanning 553.750 MHz SC-QAM (Annex B(HRC))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 547.750 MHz SC-QAM (Annex B(HRC))
Scanning 541.750 MHz SC-QAM (Annex B(HRC))
Scanning 535.750 MHz SC-QAM (Annex B(HRC))
Scanning 529.750 MHz SC-QAM (Annex B(HRC))
Scanning 523.750 MHz SC-QAM (Annex B(HRC))
Scanning 517.750 MHz SC-QAM (Annex B(HRC))
Scanning 511.750 MHz SC-QAM (Annex B(HRC))
Scanning 505.750 MHz SC-QAM (Annex B(HRC))
Scanning 499.750 MHz SC-QAM (Annex B(HRC))
Scanning 493.750 MHz SC-QAM (Annex B(HRC))
Scanning 487.750 MHz SC-QAM (Annex B(HRC))
Scanning 481.750 MHz SC-QAM (Annex B(HRC))
Scanning 475.750 MHz SC-QAM (Annex B(HRC))
Scanning 469.750 MHz SC-QAM (Annex B(HRC))
Scanning 463.750 MHz SC-QAM (Annex B(HRC))
Scanning 457.750 MHz SC-QAM (Annex B(HRC))
Scanning 451.750 MHz SC-QAM (Annex B(HRC))
Scanning 445.750 MHz SC-QAM (Annex B(HRC))
Scanning 439.750 MHz SC-QAM (Annex B(HRC))
Scanning 433.750 MHz SC-QAM (Annex B(HRC))
Scanning 427.750 MHz SC-QAM (Annex B(HRC))
Scanning 421.750 MHz SC-QAM (Annex B(HRC))
Scanning 415.750 MHz SC-QAM (Annex B(HRC))
Scanning 409.750 MHz SC-QAM (Annex B(HRC))
Scanning 403.750 MHz SC-QAM (Annex B(HRC))
Scanning 397.750 MHz SC-QAM (Annex B(HRC))
Scanning 391.750 MHz SC-QAM (Annex B(HRC))
Scanning 385.750 MHz SC-QAM (Annex B(HRC))
Scanning 379.750 MHz SC-QAM (Annex B(HRC))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 373.750 MHz SC-QAM (Annex B(HRC))
Scanning 367.750 MHz SC-QAM (Annex B(HRC))
Scanning 361.750 MHz SC-QAM (Annex B(HRC))
Scanning 355.750 MHz SC-QAM (Annex B(HRC))
Scanning 349.750 MHz SC-QAM (Annex B(HRC))
Scanning 343.750 MHz SC-QAM (Annex B(HRC))
Scanning 337.750 MHz SC-QAM (Annex B(HRC))
Scanning 331.750 MHz SC-QAM (Annex B(HRC))
Scanning 325.750 MHz SC-QAM (Annex B(HRC))
Scanning 319.750 MHz SC-QAM (Annex B(HRC))
Scanning 313.750 MHz SC-QAM (Annex B(HRC))
Scanning 307.750 MHz SC-QAM (Annex B(HRC))
Scanning 301.750 MHz SC-QAM (Annex B(HRC))
Scanning 295.750 MHz SC-QAM (Annex B(HRC))
Scanning 289.750 MHz SC-QAM (Annex B(HRC))
Scanning 283.750 MHz SC-QAM (Annex B(HRC))
Scanning 277.750 MHz SC-QAM (Annex B(HRC))
Scanning 271.750 MHz SC-QAM (Annex B(HRC))
Scanning 265.750 MHz SC-QAM (Annex B(HRC))
Scanning 259.750 MHz SC-QAM (Annex B(HRC))
Scanning 400.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 408.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 416.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 424.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 432.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 440.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 448.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 456.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 464.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 472.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 480.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 488.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 496.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 504.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 512.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 520.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 528.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 536.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 544.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 552.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 560.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 568.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 576.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 584.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 592.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 600.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 608.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 616.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 624.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 632.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 640.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 648.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 656.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 664.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 672.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 680.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 688.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 696.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 704.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 712.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 720.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 728.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 736.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 744.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 752.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 760.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 768.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 776.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 784.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 792.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 800.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 808.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 816.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 824.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 832.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 840.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 848.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 856.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 864.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 872.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 880.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 888.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 896.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 904.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 912.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 920.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 928.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 936.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 944.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 952.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 960.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 968.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 976.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 984.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 992.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 392.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 384.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 376.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 368.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 360.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 352.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 344.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 336.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 328.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 320.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 312.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 304.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 296.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 288.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 280.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 272.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 264.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 258.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 259.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 260.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 261.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 262.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 263.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 264.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 265.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 266.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 267.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 268.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 269.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 270.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 271.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 272.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 273.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 274.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 275.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 276.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 277.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 278.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 279.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 280.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 281.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 282.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 283.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 284.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 285.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 286.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 287.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 288.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 289.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 290.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 291.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 292.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 293.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 294.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 295.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 296.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 297.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 298.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 299.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 300.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 301.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 302.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 303.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 304.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 305.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 306.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 307.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 308.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 309.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 310.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 311.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 312.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 313.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 314.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 315.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 316.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 317.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 318.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 319.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 320.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 321.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 322.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 323.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 324.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 325.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 326.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 327.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 328.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 329.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 330.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 331.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 332.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 333.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 334.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 335.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 336.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 337.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 338.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 339.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 340.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 341.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 342.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 343.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 344.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 345.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 346.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 347.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 348.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 349.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 350.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 351.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 352.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 353.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 354.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 355.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 356.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 357.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 358.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 359.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 360.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 361.000 MHz purged (Annex A(Eu.1M))
Scanning 362.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 363.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 364.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 365.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 366.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 367.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 368.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 369.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 370.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 371.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 372.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 373.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 374.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 375.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 376.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 377.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 378.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 379.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 380.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 381.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 382.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 383.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 384.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 385.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 386.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 387.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 388.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 389.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 390.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 391.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 392.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 393.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 394.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 395.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 396.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 397.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 398.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 399.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 400.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 401.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 402.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 403.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 404.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 405.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 406.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 407.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 408.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 409.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 410.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 411.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 412.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 413.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 414.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 415.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 416.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 417.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 418.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 419.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 420.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 421.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 422.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 423.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 424.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 425.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 426.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 427.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 428.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 429.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 430.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 431.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 432.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 433.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 434.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 435.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 436.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 437.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 438.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 439.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 440.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 441.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 442.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 443.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 444.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 445.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 446.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 447.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 448.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 449.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 450.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 451.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 452.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 453.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 454.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 455.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 456.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 457.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 458.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 459.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 460.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 461.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 462.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 463.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 464.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 465.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 466.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 467.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 468.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 469.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 470.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 471.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 472.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 473.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 474.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 475.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 476.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 477.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 478.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 479.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 480.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 481.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 482.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 483.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 484.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 485.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 486.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 487.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 488.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 489.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 490.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 491.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 492.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 493.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 494.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 495.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 496.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 497.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 498.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 499.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 500.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 501.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 502.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 503.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 504.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 505.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 506.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 507.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 508.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 509.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 510.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 511.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 512.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 513.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 514.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 515.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 516.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 517.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 518.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 519.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 520.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 521.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 522.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 523.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 524.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 525.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 526.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 527.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 528.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 529.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 530.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 531.000 MHz SC-QAM (Annex A(Eu.1M)) locked SC-QAM
[02:16:11 01/01/1970] [CmDocsisCtlThread] BcmCmDsChan::DsLockOk: (BcmCmDsChan 0)
hwRxId=0 freq=0 dcid=0

******************************************
DOWNSTREAM STATUS
******************************************
HW Channel ID = 0
Phy type: SC-QAM
DS active chan settings:
ds chan id = 0
center freq, Hz = 531000000 Hz
primary capable = false
status event rpt bitmask = 0
CM HW Detected DS Phy Settings:
Center Freq, Hz = 531000000
QAM = Locked
FEC = Locked
Carrier Freq Offset, kHz = 0
Channel Width, Hz = 8000000
Modulation = Qam256
Interleaver = Taps12Incr17
Symbol Rate, sym/sec = 6952000

******************************************

[02:16:11 01/01/1970] [CmDocsisCtlThread]


BcmCmMacDomainSetsState::StartDsMacMddInit:
**********************************************
Waiting for MDDs...
**********************************************

BcmCmDocsisCtlMsgACT::HandleEvent() @time=8171760 event_code=4 (kCmPriDsMddSetsOk)

MDD diplexer band edge not specified.


MDD Plant US Frequency Range = extended.
Requested Spectrum = US:(0 MHz..85 MHz) DS:(0 MHz..0 MHz)
Best Match = 0: US:(5 MHz..85 MHz) DS:(108 MHz..1218 MHz)
Switchable diplexer ECN support disabled. NOT switching diplexer.
[02:16:11 01/01/1970] [CmDocsisCtlThread]
BcmCmMdDsSgDiscState::TrimSgSetWithoutThisDcid:
1 candidate MD-DS-SG remain after TrimSgSetWithoutThisDcid( target_dcid )
for target_dcid=0x01 (1)
[02:16:11 01/01/1970] [CmDocsisCtlThread] BcmCmMdDsSgDiscState::StartMdDsSgDisc:
special case: one and only one MD-DS-SG contains mdd_dcid.
fMdDsSgId=0x1d (29)
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , M-d++a+i-+Ty-eA+dA++e|:
i_L-ca+A++e|A: 1
Chec+ +D_A++e|A
Cha++e+ Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1

MD-DS-SG discovery info:

fCmMdDsSgDiscState = 6 (kMdDsSgDiscDone)
fMdDsSgId = 0x1d (29)
fMdDsSgDiscovered = true

Trimmed Candidate Downstream Service Group Settings List: list size = 1

sgid size member dcid's


---- ---- -------------
29 34 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
27 28 29 30 31 32 159 160

Downstream Active Channel Settings List:

dcid type frequency prim capable rpt enable mod/annex or PLC params
---- -------- --------- ------------ ---------- -----------------------
1 SC-QAM 531000000 y 0x36 256QAM/AnnexA
2 SC-QAM 539000000 y 0x36 256QAM/AnnexA
3 SC-QAM 547000000 y 0x36 256QAM/AnnexA
4 SC-QAM 555000000 y 0x36 256QAM/AnnexA
5 SC-QAM 563000000 y 0x36 256QAM/AnnexA
6 SC-QAM 571000000 y 0x36 256QAM/AnnexA
7 SC-QAM 579000000 y 0x36 256QAM/AnnexA
8 SC-QAM 587000000 y 0x36 256QAM/AnnexA
9 SC-QAM 595000000 y 0x36 256QAM/AnnexA
10 SC-QAM 603000000 y 0x36 256QAM/AnnexA
11 SC-QAM 611000000 y 0x36 256QAM/AnnexA
12 SC-QAM 619000000 y 0x36 256QAM/AnnexA
13 SC-QAM 627000000 y 0x36 256QAM/AnnexA
14 SC-QAM 635000000 y 0x36 256QAM/AnnexA
15 SC-QAM 643000000 y 0x36 256QAM/AnnexA
16 SC-QAM 651000000 y 0x36 256QAM/AnnexA
17 SC-QAM 659000000 y 0x36 256QAM/AnnexA
18 SC-QAM 667000000 y 0x36 256QAM/AnnexA
19 SC-QAM 675000000 y 0x36 256QAM/AnnexA
20 SC-QAM 683000000 y 0x36 256QAM/AnnexA
21 SC-QAM 691000000 y 0x36 256QAM/AnnexA
22 SC-QAM 699000000 y 0x36 256QAM/AnnexA
23 SC-QAM 707000000 y 0x36 256QAM/AnnexA
24 SC-QAM 715000000 y 0x36 256QAM/AnnexA
25 SC-QAM 723000000 y 0x36 256QAM/AnnexA
26 SC-QAM 731000000 y 0x36 256QAM/AnnexA
27 SC-QAM 739000000 y 0x36 256QAM/AnnexA
28 SC-QAM 747000000 y 0x36 256QAM/AnnexA
29 SC-QAM 755000000 y 0x36 256QAM/AnnexA
30 SC-QAM 763000000 y 0x36 256QAM/AnnexA
31 SC-QAM 771000000 y 0x36 256QAM/AnnexA
32 SC-QAM 779000000 y 0x36 256QAM/AnnexA
159 OFDM PLC 897000000 n 0x36 25Khz/5us/0.625us
160 OFDM PLC 361000000 n 0x36 50Khz/0.9375us/0.625us

Trimmed Downstream Ambiguity Resolution Frequency List: list size = 3

531000000-sc_qam 539000000-sc_qam 547000000-sc_qam

visible dcid set = 1

freq with visible dcid set = 531000000

BcmCmDocsisCtlMsgACT::HandleEvent() @time=8172360 event_code=11


(kCmMdDsSgDiscDone)
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=true
[02:16:12 01/01/1970] [CmDocsisCtlThread]
BcmDocsisCmHalIf::SetPrimaryDownstreamChannel: (DOCSIS CableModem HalIf)
Installing primary downstream channel index: 0
SetRatios called with primary downstream channel number = 0
AnnexMode[0] = 1 QAM_Mode[0] = 256
Num/Den = 869/1280
3390 SCDMA/OFDM mode - ChannelNumber = 0 Numerator = 869 Denominator = 1280
CM/DocsisCtl> [02:16:12 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL failed to acquire sync or lost sync!
... TCOFDM - DTR is now locked.... (T2=150ms Sync=14)

Given a 216 MHz TCOFDM clock, the nominal value for the DTR FCW is 0xC22E45067
The DTR FCW is 0xc22e97f3 - that value is good (6, within 100 ppm)
Kicked off the DPLL
LE Done bit was set
LE Done bit was set
SCQAM DS clock source.
PLL in Leaky mode.
PLL Fn = 6, k1 = 18, k2 = 19
[02:16:12 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context=1 (ErrorRecovery)
[02:16:12 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context is error recovery or startup.
Always use last good upstream target chan id=1
[02:16:12 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper) Locked on the downstream. Waiting for UCDs...
[02:16:12 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefFail: (Cm
Multi US Helper) target hwTxId=0
CM/DocsisCtl> [02:16:14 01/01/1970] [CmDocsisCtlThread]
BcmCmMultiUsHelper::TmUcdRxTimerEvent: (Cm Multi US Helper)
ucd gathering ok.

[02:16:14 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper) state at
entry:

Channel targeting:
Downstream:
fTargetDsFreqHz = 0 (0)
fCurrentDsFreqHz = 0x1fa66ac0 (531000000)
fStoredDsFreqHz = 0x29020c00 (688000000)

Upstream:
fDestSingleTxTargetUsChanId = 0x1 (1)
fTargetingContext = 1 (ErrorRecovery)

Startup UCD Selection Info:

low priority candidate ucid list = 3 1 4 2 5 8 7 6


happy home ucid set = 1 2 3 4

Upstream Active Channel Settings:

ucid rpt enable sel prio MAP source dcid's


---- ---------- -------- -----------------
1 0x1c0 0
2 0x1c0 0
3 0x1c0 0
4 0x1c0 0
5 0x1c0 0
6 0x1c0 0
7 0x1c0 0
8 0x1c0 0

BcmCmUsTargetMset (a.k.a. usable UCDs gathered during startup):

us config
phy change ranging scdma
type ucid dcid count tried? enabled?
---- ---- ---- ------ ------- --------
3 1 1 4 n n
3 2 1 4 n n
3 3 1 4 n n
3 4 1 4 n n
3 5 1 4 n n
3 6 1 4 n n
3 7 1 4 n n
3 8 1 4 n n

[02:16:14 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper)
starting docs3 upstream initialization on target ucid=3
with upstream phy type 3 on hardware transmitter index 0
[02:16:14 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::ExecuteTccCmd: hwTxId=0
docs ucid=0
[02:16:14 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0
[02:16:14 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::InstallUsSets: Installing
UCD w/ucid for UCID=3 for CM hardware tx chan 0

[02:16:14 01/01/1970] [CmDocsisCtlThread]


BcmCmUsSetsState::TestAndLaunchUsTimeSync: starting upstream time sync
acquisition...
[02:16:14 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefOk: (Cm
Multi US Helper) target hwTxId=0
[02:16:14 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::UsTimeRefOk: upstream time
sync acquired for fHwTxId=0

== Beginning initial ranging for Docsis UCID 3 ==


Minimum transmit power is 17 dBmV
Maximum transmit power is 53 dBmV
Stored power level for UCID 3 is 38 dBmV
Using per transmitter stored initial upstream power = 38 dBmV hwTxId = 0 docsis
UCID = 3
RNG-RSP UsChanId=3 Adj: tim=1965 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV):
(3-40.75) )
[02:16:15 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0xc9
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (3-
41.25) )
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (3-
41.25) )
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (3-
41.25) )
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (3-
41.25) )
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Success (CmdPwr (UsChanId-dBmV): (3-
41.25) )
[02:16:20 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::FirstRngSuccess:
(CmDocsisCtlThread)
first RNG-RSP w/status==SUCCESS for hwTxId=0 and DOCSIS ucid=3
[02:16:20 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::LaunchEaeBpkm:
(CmDocsisCtlThread) BPKM enabled. starting Early Authentication and Encryption BPKM
key requests. Primary Sid = 201
CM/DocsisCtl> Bandwidth request failure! Status = 0

BcmCmUsChanTimerMuxACT::HandleEvent() @time=8370440 fTimerType=5


(kT4NoStationMaint) hwTxId=0 docs ucid=3
[02:19:30 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::T4NoStationMaintEvent: ERROR - no Station Maint map op error.
hwTxId=0 docs ucid=3
[02:19:30 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::CommonRngErrorHandler: reason=10 (T4NoStationMaintTimeout)
hwTxId=0 docs ucid=3
[02:19:30 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) Purging DS
frequency 531000000 from current scan pass due to pre-registration restart error
[02:19:30 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) reinit MAC #37:
T4NoStationMaintTimeout

[02:19:30 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::Reset:


(CmDocsisCtlThread) DefaultSnmpAgentClass::RestartPendingEvent for Vendor CM
Agent w/ BRCM Factory Support
Logging event: Received Response to Broadcast Maintenance Request, But no Unicast
Maintenance opportunities received - T4 time out;CM-MAC=fc:4a:e9:de:ad:88;CMTS-
MAC=28:52:61:fa:d8:78;CM-QOS=1.1;CM-VER=3.1;
Vendor CM Agent w/ BRCM Factory Support updating ifTableLastChange.
Vendor CM Agent w/ BRCM Factory Support resetting to default state.
Vendor CM Agent w/ BRCM Factory Support destroying users...
Vendor CM Agent w/ BRCM Factory Support destroying notifies...
Vendor CM Agent w/ BRCM Factory Support destroying views...
Allowing DOCS-CABLE-DEVICE-MIB IP filters.
Vendor CM Agent w/ BRCM Factory Support deferring traps.
Received RG Event 0x80000001 State 0x1
eRouter Linux WAN Down
[02:19:30 01/01/1970] [eRouterMsgPipe] eRouterMsgPipe::UpdateIpNetToMediaEntry:
(eRouterMsgPipe) eRouter IP address:0.0.0.0
02:19:30.730 01/01/1970 (CALC) mtaCmStatusInfo() - MTA is Signaled: *NOT-
OPERATIONAL* (Stat=0x1) emtaCurState = 0.
EmtaSnmpAgent::SoftReset
Pausing trap thread
emta factory agentResetting to default state.
emta factory agent destroying users...
emta factory agent destroying notifies...
emta factory agent destroying views...
emta factory agent entering RFC-2576 Coexistence security mode.
emta factory agent entering Basic/Hybrid flow provisioning mode.
Resuming trap thread
Stopping DHCP/ToD/TFTP (client requested)...
[02:19:30 01/01/1970] [CmDocsisIpThread] BcmEcosIpHalIf::RemoveIpv6Address: (IP
Stack1 HalIf) ERROR - Failed to remove IPv6 address fe80::fe4a:e9ff:fede:ad88/64
from the stack!
[02:19:30 01/01/1970] [CmDocsisIpThread] BcmDhcpV6ClientIf::ReleaseAddresses:
(DHCPv6 ClientIf for IP Stack1) ERROR - IA state is initial; there is no address to
release.
BcmDocsis3DsMacEnableMulticastDsidForwarding 0; primary DS = 0
SCQAM DSID filter control = 0x00
OFDM DSID filter control = 0x01
Deleting DOCSIS 1.0 CoS Settings for SID 0xc9
[02:19:31 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows:
(DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along
with associated Classifiers and PHS rules...
[02:19:31 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState:
(CmDocsisCtlThread)
[02:19:31 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Primary SID for usHwChannel 0 to 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 1
Updating US chan 8 data Profile test msg for Sid: 0x0.
Updating US chan 9 data Profile test msg for Sid: 0x0.
CM/DocsisCtl> [02:19:31 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL declared PULSE lost!
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=false
[02:19:31 01/01/1970] [CmDocsisCtlThread] BcmCmMultiDsHelper::PreRegDsChanChange:
target freq hz = 0
reason string = ErrorRecovery
CmInitReason = 16

Starting DS scanning...
[02:19:31 01/01/1970] [CmDocsisCtlThread] BcmCmDownstreamScan::StartScan: Starting
DS scan
Checking for cable cut...

CM/DocsisCtl> Plant power is 15.55

Cable connected

CM/DocsisCtl> Scanning 532.000 MHz SC-QAM (Annex A(Eu.1M))


Scanning 533.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 534.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 535.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 536.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 537.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 538.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 539.000 MHz SC-QAM (Annex A(Eu.1M)) locked SC-QAM
[02:19:34 01/01/1970] [CmDocsisCtlThread] BcmCmDsChan::DsLockOk: (BcmCmDsChan 0)
hwRxId=0 freq=0 dcid=0

******************************************
DOWNSTREAM STATUS
******************************************
HW Channel ID = 0
Phy type: SC-QAM
DS active chan settings:
ds chan id = 0
center freq, Hz = 539000000 Hz
primary capable = false
status event rpt bitmask = 0

CM HW Detected DS Phy Settings:


Center Freq, Hz = 539000000
QAM = Locked
FEC = Locked
Carrier Freq Offset, kHz = 0
Channel Width, Hz = 8000000
Modulation = Qam256
Interleaver = Taps12Incr17
Symbol Rate, sym/sec = 6952000

******************************************

[02:19:34 01/01/1970] [CmDocsisCtlThread]


BcmCmMacDomainSetsState::StartDsMacMddInit:
**********************************************
Waiting for MDDs...
**********************************************

CM/DocsisCtl>
BcmCmDocsisCtlMsgACT::HandleEvent() @time=8375760 event_code=4 (kCmPriDsMddSetsOk)

MDD diplexer band edge not specified.


MDD Plant US Frequency Range = extended.
Requested Spectrum = US:(0 MHz..85 MHz) DS:(0 MHz..0 MHz)
Best Match = 0: US:(5 MHz..85 MHz) DS:(108 MHz..1218 MHz)
Switchable diplexer ECN support disabled. NOT switching diplexer.
[02:19:35 01/01/1970] [CmDocsisCtlThread]
BcmCmMdDsSgDiscState::TrimSgSetWithoutThisDcid:
1 candidate MD-DS-SG remain after TrimSgSetWithoutThisDcid( target_dcid )
for target_dcid=0x02 (2)
[02:19:35 01/01/1970] [CmDocsisCtlThread] BcmCmMdDsSgDiscState::StartMdDsSgDisc:
special case: one and only one MD-DS-SG contains mdd_dcid.
fMdDsSgId=0x1d (29)
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , M-d++a+i-+Ty-eA+dA++e|:
i_L-ca+A++e|A: 1
Chec+ +D_A++e|A
Cha++e+ Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1

MD-DS-SG discovery info:

fCmMdDsSgDiscState = 6 (kMdDsSgDiscDone)
fMdDsSgId = 0x1d (29)
fMdDsSgDiscovered = true
Trimmed Candidate Downstream Service Group Settings List: list size = 1

sgid size member dcid's


---- ---- -------------
29 34 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
27 28 29 30 31 32 159 160

Downstream Active Channel Settings List:

dcid type frequency prim capable rpt enable mod/annex or PLC params
---- -------- --------- ------------ ---------- -----------------------
1 SC-QAM 531000000 y 0x36 256QAM/AnnexA
2 SC-QAM 539000000 y 0x36 256QAM/AnnexA
3 SC-QAM 547000000 y 0x36 256QAM/AnnexA
4 SC-QAM 555000000 y 0x36 256QAM/AnnexA
5 SC-QAM 563000000 y 0x36 256QAM/AnnexA
6 SC-QAM 571000000 y 0x36 256QAM/AnnexA
7 SC-QAM 579000000 y 0x36 256QAM/AnnexA
8 SC-QAM 587000000 y 0x36 256QAM/AnnexA
9 SC-QAM 595000000 y 0x36 256QAM/AnnexA
10 SC-QAM 603000000 y 0x36 256QAM/AnnexA
11 SC-QAM 611000000 y 0x36 256QAM/AnnexA
12 SC-QAM 619000000 y 0x36 256QAM/AnnexA
13 SC-QAM 627000000 y 0x36 256QAM/AnnexA
14 SC-QAM 635000000 y 0x36 256QAM/AnnexA
15 SC-QAM 643000000 y 0x36 256QAM/AnnexA
16 SC-QAM 651000000 y 0x36 256QAM/AnnexA
17 SC-QAM 659000000 y 0x36 256QAM/AnnexA
18 SC-QAM 667000000 y 0x36 256QAM/AnnexA
19 SC-QAM 675000000 y 0x36 256QAM/AnnexA
20 SC-QAM 683000000 y 0x36 256QAM/AnnexA
21 SC-QAM 691000000 y 0x36 256QAM/AnnexA
22 SC-QAM 699000000 y 0x36 256QAM/AnnexA
23 SC-QAM 707000000 y 0x36 256QAM/AnnexA
24 SC-QAM 715000000 y 0x36 256QAM/AnnexA
25 SC-QAM 723000000 y 0x36 256QAM/AnnexA
26 SC-QAM 731000000 y 0x36 256QAM/AnnexA
27 SC-QAM 739000000 y 0x36 256QAM/AnnexA
28 SC-QAM 747000000 y 0x36 256QAM/AnnexA
29 SC-QAM 755000000 y 0x36 256QAM/AnnexA
30 SC-QAM 763000000 y 0x36 256QAM/AnnexA
31 SC-QAM 771000000 y 0x36 256QAM/AnnexA
32 SC-QAM 779000000 y 0x36 256QAM/AnnexA
159 OFDM PLC 897000000 n 0x36 25Khz/5us/0.625us
160 OFDM PLC 361000000 n 0x36 50Khz/0.9375us/0.625us

Trimmed Downstream Ambiguity Resolution Frequency List: list size = 3

531000000-sc_qam 539000000-sc_qam 547000000-sc_qam

visible dcid set = 2

freq with visible dcid set = 539000000


BcmCmDocsisCtlMsgACT::HandleEvent() @time=8376360 event_code=11
(kCmMdDsSgDiscDone)
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=true
[02:19:36 01/01/1970] [CmDocsisCtlThread]
BcmDocsisCmHalIf::SetPrimaryDownstreamChannel: (DOCSIS CableModem HalIf)
Installing primary downstream channel index: 0
SetRatios called with primary downstream channel number = 0
AnnexMode[0] = 1 QAM_Mode[0] = 256
Num/Den = 869/1280
3390 SCDMA/OFDM mode - ChannelNumber = 0 Numerator = 869 Denominator = 1280
CM/DocsisCtl> [02:19:36 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL failed to acquire sync or lost sync!
... TCOFDM - DTR is now locked.... (T2=150ms Sync=14)

Given a 216 MHz TCOFDM clock, the nominal value for the DTR FCW is 0xC22E45067
The DTR FCW is 0xc22e9761 - that value is good (6, within 100 ppm)
Kicked off the DPLL
LE Done bit was set
LE Done bit was set
SCQAM DS clock source.
PLL in Leaky mode.
PLL Fn = 6, k1 = 18, k2 = 19
[02:19:36 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context=1 (ErrorRecovery)
[02:19:36 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context is error recovery or startup.
Always use last good upstream target chan id=1
[02:19:36 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper) Locked on the downstream. Waiting for UCDs...
[02:19:36 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefFail: (Cm
Multi US Helper) target hwTxId=0
CM/DocsisCtl> [02:19:38 01/01/1970] [CmDocsisCtlThread]
BcmCmMultiUsHelper::TmUcdRxTimerEvent: (Cm Multi US Helper)
ucd gathering ok.

[02:19:38 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper) state at
entry:

Channel targeting:
Downstream:
fTargetDsFreqHz = 0 (0)
fCurrentDsFreqHz = 0x20207cc0 (539000000)
fStoredDsFreqHz = 0x29020c00 (688000000)

Upstream:
fDestSingleTxTargetUsChanId = 0x1 (1)
fTargetingContext = 1 (ErrorRecovery)

Startup UCD Selection Info:

low priority candidate ucid list = 1 2 4 3 6 5 8 7


happy home ucid set = 1 2 3 4
Upstream Active Channel Settings:

ucid rpt enable sel prio MAP source dcid's


---- ---------- -------- -----------------
1 0x1c0 0
2 0x1c0 0
3 0x1c0 0
4 0x1c0 0
5 0x1c0 0
6 0x1c0 0
7 0x1c0 0
8 0x1c0 0

BcmCmUsTargetMset (a.k.a. usable UCDs gathered during startup):

us config
phy change ranging scdma
type ucid dcid count tried? enabled?
---- ---- ---- ------ ------- --------
3 1 2 4 n n
3 2 2 4 n n
3 3 2 4 n n
3 4 2 4 n n
3 5 2 4 n n
3 6 2 4 n n
3 7 2 4 n n
3 8 2 4 n n

[02:19:38 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper)
starting docs3 upstream initialization on target ucid=1
with upstream phy type 3 on hardware transmitter index 0

[02:19:38 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::ExecuteTccCmd: hwTxId=0


docs ucid=0
[02:19:38 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0
[02:19:38 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::InstallUsSets: Installing
UCD w/ucid for UCID=1 for CM hardware tx chan 0

[02:19:38 01/01/1970] [CmDocsisCtlThread]


BcmCmUsSetsState::TestAndLaunchUsTimeSync: starting upstream time sync
acquisition...
[02:19:38 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefOk: (Cm
Multi US Helper) target hwTxId=0
[02:19:38 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::UsTimeRefOk: upstream time
sync acquired for fHwTxId=0

== Beginning initial ranging for Docsis UCID 1 ==


Minimum transmit power is 17 dBmV
Maximum transmit power is 53 dBmV
Stored power level for UCID 1 is 39 dBmV
Using per transmitter stored initial upstream power = 39 dBmV hwTxId = 0 docsis
UCID = 1
RNG-RSP UsChanId=1 Adj: tim=1865 freq=-58 Stat=Continue (CmdPwr (UsChanId-dBmV):
(1-41.25) )
[02:19:39 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0xc9
RNG-RSP UsChanId=1 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (1-
41.25) )
RNG-RSP UsChanId=1 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (1-
41.25) )
RNG-RSP UsChanId=1 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (1-
41.25) )
RNG-RSP UsChanId=1 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (1-
41.25) )
RNG-RSP UsChanId=1 Adj: tim=0 freq=0 Stat=Success (CmdPwr (UsChanId-dBmV): (1-
41.25) )
[02:19:44 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::FirstRngSuccess:
(CmDocsisCtlThread)
first RNG-RSP w/status==SUCCESS for hwTxId=0 and DOCSIS ucid=1
[02:19:44 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::LaunchEaeBpkm:
(CmDocsisCtlThread) BPKM enabled. starting Early Authentication and Encryption BPKM
key requests. Primary Sid = 201
CM/DocsisCtl> Bandwidth request failure! Status = 0

BcmCmUsChanTimerMuxACT::HandleEvent() @time=8574460 fTimerType=5


(kT4NoStationMaint) hwTxId=0 docs ucid=1
[02:22:54 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::T4NoStationMaintEvent: ERROR - no Station Maint map op error.
hwTxId=0 docs ucid=1
[02:22:54 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::CommonRngErrorHandler: reason=10 (T4NoStationMaintTimeout)
hwTxId=0 docs ucid=1
[02:22:54 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) Purging DS
frequency 539000000 from current scan pass due to pre-registration restart error
[02:22:54 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) reinit MAC #38:
T4NoStationMaintTimeout

[02:22:54 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::Reset:


(CmDocsisCtlThread) DefaultSnmpAgentClass::RestartPendingEvent for Vendor CM
Agent w/ BRCM Factory Support
Logging event: Received Response to Broadcast Maintenance Request, But no Unicast
Maintenance opportunities received - T4 time out;CM-MAC=fc:4a:e9:de:ad:88;CMTS-
MAC=28:52:61:fa:d8:78;CM-QOS=1.1;CM-VER=3.1;
Vendor CM Agent w/ BRCM Factory Support updating ifTableLastChange.
Vendor CM Agent w/ BRCM Factory Support resetting to default state.
Vendor CM Agent w/ BRCM Factory Support destroying users...
Vendor CM Agent w/ BRCM Factory Support destroying notifies...
Vendor CM Agent w/ BRCM Factory Support destroying views...
Allowing DOCS-CABLE-DEVICE-MIB IP filters.
Vendor CM Agent w/ BRCM Factory Support deferring traps.
Received RG Event 0x80000001 State 0x1
eRouter Linux WAN Down
[02:22:54 01/01/1970] [eRouterMsgPipe] eRouterMsgPipe::UpdateIpNetToMediaEntry:
(eRouterMsgPipe) eRouter IP address:0.0.0.0
02:22:54.750 01/01/1970 (CALC) mtaCmStatusInfo() - MTA is Signaled: *NOT-
OPERATIONAL* (Stat=0x1) emtaCurState = 0.
EmtaSnmpAgent::SoftReset
Pausing trap thread
emta factory agentResetting to default state.
emta factory agent destroying users...
emta factory agent destroying notifies...
emta factory agent destroying views...
emta factory agent entering RFC-2576 Coexistence security mode.
emta factory agent entering Basic/Hybrid flow provisioning mode.
Resuming trap thread
Stopping DHCP/ToD/TFTP (client requested)...
[02:22:54 01/01/1970] [CmDocsisIpThread] BcmEcosIpHalIf::RemoveIpv6Address: (IP
Stack1 HalIf) ERROR - Failed to remove IPv6 address fe80::fe4a:e9ff:fede:ad88/64
from the stack!
[02:22:54 01/01/1970] [CmDocsisIpThread] BcmDhcpV6ClientIf::ReleaseAddresses:
(DHCPv6 ClientIf for IP Stack1) ERROR - IA state is initial; there is no address to
release.
BcmDocsis3DsMacEnableMulticastDsidForwarding 0; primary DS = 0
SCQAM DSID filter control = 0x00
OFDM DSID filter control = 0x01
Deleting DOCSIS 1.0 CoS Settings for SID 0xc9
[02:22:55 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows:
(DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along
with associated Classifiers and PHS rules...
[02:22:55 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState:
(CmDocsisCtlThread)
[02:22:55 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Primary SID for usHwChannel 0 to 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 1
Updating US chan 8 data Profile test msg for Sid: 0x0.
Updating US chan 9 data Profile test msg for Sid: 0x0.
CM/DocsisCtl> [02:22:55 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL declared PULSE lost!
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=false
[02:22:55 01/01/1970] [CmDocsisCtlThread] BcmCmMultiDsHelper::PreRegDsChanChange:
target freq hz = 0
reason string = ErrorRecovery
CmInitReason = 16

Starting DS scanning...
[02:22:55 01/01/1970] [CmDocsisCtlThread] BcmCmDownstreamScan::StartScan: Starting
DS scan
Checking for cable cut...

CM/DocsisCtl> Plant power is 15.55

Cable connected

Scanning 540.000 MHz SC-QAM (Annex A(Eu.1M))


CM/DocsisCtl> Scanning 541.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 542.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 543.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 544.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 545.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 546.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 547.000 MHz SC-QAM (Annex A(Eu.1M)) locked SC-QAM
[02:22:58 01/01/1970] [CmDocsisCtlThread] BcmCmDsChan::DsLockOk: (BcmCmDsChan 0)
hwRxId=0 freq=0 dcid=0

******************************************
DOWNSTREAM STATUS
******************************************
HW Channel ID = 0
Phy type: SC-QAM
DS active chan settings:
ds chan id = 0
center freq, Hz = 547000000 Hz
primary capable = false
status event rpt bitmask = 0

CM HW Detected DS Phy Settings:


Center Freq, Hz = 547000000
QAM = Locked
FEC = Locked
Carrier Freq Offset, kHz = 0
Channel Width, Hz = 8000000
Modulation = Qam256
Interleaver = Taps12Incr17
Symbol Rate, sym/sec = 6952000

******************************************

[02:22:59 01/01/1970] [CmDocsisCtlThread]


BcmCmMacDomainSetsState::StartDsMacMddInit:
**********************************************
Waiting for MDDs...
**********************************************

CM/DocsisCtl>
BcmCmDocsisCtlMsgACT::HandleEvent() @time=8579760 event_code=4 (kCmPriDsMddSetsOk)

MDD diplexer band edge not specified.


MDD Plant US Frequency Range = extended.
Requested Spectrum = US:(0 MHz..85 MHz) DS:(0 MHz..0 MHz)
Best Match = 0: US:(5 MHz..85 MHz) DS:(108 MHz..1218 MHz)
Switchable diplexer ECN support disabled. NOT switching diplexer.
[02:22:59 01/01/1970] [CmDocsisCtlThread]
BcmCmMdDsSgDiscState::TrimSgSetWithoutThisDcid:
1 candidate MD-DS-SG remain after TrimSgSetWithoutThisDcid( target_dcid )
for target_dcid=0x03 (3)
[02:22:59 01/01/1970] [CmDocsisCtlThread] BcmCmMdDsSgDiscState::StartMdDsSgDisc:
special case: one and only one MD-DS-SG contains mdd_dcid.
fMdDsSgId=0x1d (29)
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , M-d++a+i-+Ty-eA+dA++e|:
i_L-ca+A++e|A: 1
Chec+ +D_A++e|A
Cha++e+ Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1

MD-DS-SG discovery info:

fCmMdDsSgDiscState = 6 (kMdDsSgDiscDone)
fMdDsSgId = 0x1d (29)
fMdDsSgDiscovered = true

Trimmed Candidate Downstream Service Group Settings List: list size = 1

sgid size member dcid's


---- ---- -------------
29 34 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
27 28 29 30 31 32 159 160

Downstream Active Channel Settings List:

dcid type frequency prim capable rpt enable mod/annex or PLC params
---- -------- --------- ------------ ---------- -----------------------
1 SC-QAM 531000000 y 0x36 256QAM/AnnexA
2 SC-QAM 539000000 y 0x36 256QAM/AnnexA
3 SC-QAM 547000000 y 0x36 256QAM/AnnexA
4 SC-QAM 555000000 y 0x36 256QAM/AnnexA
5 SC-QAM 563000000 y 0x36 256QAM/AnnexA
6 SC-QAM 571000000 y 0x36 256QAM/AnnexA
7 SC-QAM 579000000 y 0x36 256QAM/AnnexA
8 SC-QAM 587000000 y 0x36 256QAM/AnnexA
9 SC-QAM 595000000 y 0x36 256QAM/AnnexA
10 SC-QAM 603000000 y 0x36 256QAM/AnnexA
11 SC-QAM 611000000 y 0x36 256QAM/AnnexA
12 SC-QAM 619000000 y 0x36 256QAM/AnnexA
13 SC-QAM 627000000 y 0x36 256QAM/AnnexA
14 SC-QAM 635000000 y 0x36 256QAM/AnnexA
15 SC-QAM 643000000 y 0x36 256QAM/AnnexA
16 SC-QAM 651000000 y 0x36 256QAM/AnnexA
17 SC-QAM 659000000 y 0x36 256QAM/AnnexA
18 SC-QAM 667000000 y 0x36 256QAM/AnnexA
19 SC-QAM 675000000 y 0x36 256QAM/AnnexA
20 SC-QAM 683000000 y 0x36 256QAM/AnnexA
21 SC-QAM 691000000 y 0x36 256QAM/AnnexA
22 SC-QAM 699000000 y 0x36 256QAM/AnnexA
23 SC-QAM 707000000 y 0x36 256QAM/AnnexA
24 SC-QAM 715000000 y 0x36 256QAM/AnnexA
25 SC-QAM 723000000 y 0x36 256QAM/AnnexA
26 SC-QAM 731000000 y 0x36 256QAM/AnnexA
27 SC-QAM 739000000 y 0x36 256QAM/AnnexA
28 SC-QAM 747000000 y 0x36 256QAM/AnnexA
29 SC-QAM 755000000 y 0x36 256QAM/AnnexA
30 SC-QAM 763000000 y 0x36 256QAM/AnnexA
31 SC-QAM 771000000 y 0x36 256QAM/AnnexA
32 SC-QAM 779000000 y 0x36 256QAM/AnnexA
159 OFDM PLC 897000000 n 0x36 25Khz/5us/0.625us
160 OFDM PLC 361000000 n 0x36 50Khz/0.9375us/0.625us

Trimmed Downstream Ambiguity Resolution Frequency List: list size = 3

531000000-sc_qam 539000000-sc_qam 547000000-sc_qam

visible dcid set = 3

freq with visible dcid set = 547000000

BcmCmDocsisCtlMsgACT::HandleEvent() @time=8580360 event_code=11


(kCmMdDsSgDiscDone)
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=true
[02:23:00 01/01/1970] [CmDocsisCtlThread]
BcmDocsisCmHalIf::SetPrimaryDownstreamChannel: (DOCSIS CableModem HalIf)
Installing primary downstream channel index: 0
SetRatios called with primary downstream channel number = 0
AnnexMode[0] = 1 QAM_Mode[0] = 256
Num/Den = 869/1280
3390 SCDMA/OFDM mode - ChannelNumber = 0 Numerator = 869 Denominator = 1280
CM/DocsisCtl> [02:23:00 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL failed to acquire sync or lost sync!
... TCOFDM - DTR is now locked.... (T2=150ms Sync=14)

Given a 216 MHz TCOFDM clock, the nominal value for the DTR FCW is 0xC22E45067
The DTR FCW is 0xc22e9860 - that value is good (6, within 100 ppm)
Kicked off the DPLL
LE Done bit was set
LE Done bit was set
SCQAM DS clock source.
PLL in Leaky mode.
PLL Fn = 6, k1 = 18, k2 = 19
[02:23:00 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context=1 (ErrorRecovery)
[02:23:00 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context is error recovery or startup.
Always use last good upstream target chan id=1
[02:23:00 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper) Locked on the downstream. Waiting for UCDs...
[02:23:00 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefFail: (Cm
Multi US Helper) target hwTxId=0
CM/DocsisCtl> [02:23:02 01/01/1970] [CmDocsisCtlThread]
BcmCmMultiUsHelper::TmUcdRxTimerEvent: (Cm Multi US Helper)
ucd gathering ok.

[02:23:02 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper) state at
entry:

Channel targeting:
Downstream:
fTargetDsFreqHz = 0 (0)
fCurrentDsFreqHz = 0x209a8ec0 (547000000)
fStoredDsFreqHz = 0x29020c00 (688000000)

Upstream:
fDestSingleTxTargetUsChanId = 0x1 (1)
fTargetingContext = 1 (ErrorRecovery)

Startup UCD Selection Info:

low priority candidate ucid list = 3 1 4 2 6 7 5 8


happy home ucid set = 1 2 3 4

Upstream Active Channel Settings:

ucid rpt enable sel prio MAP source dcid's


---- ---------- -------- -----------------
1 0x1c0 0
2 0x1c0 0
3 0x1c0 0
4 0x1c0 0
5 0x1c0 0
6 0x1c0 0
7 0x1c0 0
8 0x1c0 0

BcmCmUsTargetMset (a.k.a. usable UCDs gathered during startup):

us config
phy change ranging scdma
type ucid dcid count tried? enabled?
---- ---- ---- ------ ------- --------
3 1 3 4 n n
3 2 3 4 n n
3 3 3 4 n n
3 4 3 4 n n
3 5 3 4 n n
3 6 3 4 n n
3 7 3 4 n n
3 8 3 4 n n

[02:23:02 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper)
starting docs3 upstream initialization on target ucid=3
with upstream phy type 3 on hardware transmitter index 0

[02:23:02 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::ExecuteTccCmd: hwTxId=0


docs ucid=0
[02:23:02 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0
[02:23:02 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::InstallUsSets: Installing
UCD w/ucid for UCID=3 for CM hardware tx chan 0

[02:23:02 01/01/1970] [CmDocsisCtlThread]


BcmCmUsSetsState::TestAndLaunchUsTimeSync: starting upstream time sync
acquisition...
[02:23:02 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefOk: (Cm
Multi US Helper) target hwTxId=0
[02:23:02 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::UsTimeRefOk: upstream time
sync acquired for fHwTxId=0

== Beginning initial ranging for Docsis UCID 3 ==


Minimum transmit power is 17 dBmV
Maximum transmit power is 53 dBmV
Stored power level for UCID 3 is 38 dBmV
Using per transmitter stored initial upstream power = 38 dBmV hwTxId = 0 docsis
UCID = 3
RNG-RSP UsChanId=3 Adj: tim=1919 freq=17 Stat=Continue (CmdPwr (UsChanId-dBmV):
(3-41.25) )
[02:23:03 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0xc9
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (3-
41.25) )
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (3-
41.25) )
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (3-
41.25) )
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (3-
41.25) )
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Success (CmdPwr (UsChanId-dBmV): (3-
41.25) )
[02:23:08 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::FirstRngSuccess:
(CmDocsisCtlThread)
first RNG-RSP w/status==SUCCESS for hwTxId=0 and DOCSIS ucid=3
[02:23:08 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::LaunchEaeBpkm:
(CmDocsisCtlThread) BPKM enabled. starting Early Authentication and Encryption BPKM
key requests. Primary Sid = 201
CM/DocsisCtl> Bandwidth request failure! Status = 0

BcmCmUsChanTimerMuxACT::HandleEvent() @time=8778500 fTimerType=5


(kT4NoStationMaint) hwTxId=0 docs ucid=3
[02:26:18 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::T4NoStationMaintEvent: ERROR - no Station Maint map op error.
hwTxId=0 docs ucid=3
[02:26:18 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::CommonRngErrorHandler: reason=10 (T4NoStationMaintTimeout)
hwTxId=0 docs ucid=3
[02:26:18 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) Purging DS
frequency 547000000 from current scan pass due to pre-registration restart error
[02:26:18 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) reinit MAC #39:
T4NoStationMaintTimeout

[02:26:18 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::Reset:


(CmDocsisCtlThread) DefaultSnmpAgentClass::RestartPendingEvent for Vendor CM
Agent w/ BRCM Factory Support
Logging event: Received Response to Broadcast Maintenance Request, But no Unicast
Maintenance opportunities received - T4 time out;CM-MAC=fc:4a:e9:de:ad:88;CMTS-
MAC=28:52:61:fa:d8:78;CM-QOS=1.1;CM-VER=3.1;
Vendor CM Agent w/ BRCM Factory Support updating ifTableLastChange.
Vendor CM Agent w/ BRCM Factory Support resetting to default state.
Vendor CM Agent w/ BRCM Factory Support destroying users...
Vendor CM Agent w/ BRCM Factory Support destroying notifies...
Vendor CM Agent w/ BRCM Factory Support destroying views...
Allowing DOCS-CABLE-DEVICE-MIB IP filters.
Vendor CM Agent w/ BRCM Factory Support deferring traps.
Received RG Event 0x80000001 State 0x1
eRouter Linux WAN Down
[02:26:18 01/01/1970] [eRouterMsgPipe] eRouterMsgPipe::UpdateIpNetToMediaEntry:
(eRouterMsgPipe) eRouter IP address:0.0.0.0
02:26:18.790 01/01/1970 (CALC) mtaCmStatusInfo() - MTA is Signaled: *NOT-
OPERATIONAL* (Stat=0x1) emtaCurState = 0.
EmtaSnmpAgent::SoftReset
Pausing trap thread
emta factory agentResetting to default state.
emta factory agent destroying users...
emta factory agent destroying notifies...
emta factory agent destroying views...
emta factory agent entering RFC-2576 Coexistence security mode.
emta factory agent entering Basic/Hybrid flow provisioning mode.
Resuming trap thread
Stopping DHCP/ToD/TFTP (client requested)...
[02:26:18 01/01/1970] [CmDocsisIpThread] BcmEcosIpHalIf::RemoveIpv6Address: (IP
Stack1 HalIf) ERROR - Failed to remove IPv6 address fe80::fe4a:e9ff:fede:ad88/64
from the stack!
[02:26:18 01/01/1970] [CmDocsisIpThread] BcmDhcpV6ClientIf::ReleaseAddresses:
(DHCPv6 ClientIf for IP Stack1) ERROR - IA state is initial; there is no address to
release.
BcmDocsis3DsMacEnableMulticastDsidForwarding 0; primary DS = 0
SCQAM DSID filter control = 0x00
OFDM DSID filter control = 0x01
CM/DocsisCtl> Deleting DOCSIS 1.0 CoS Settings for SID 0xc9
[02:26:19 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows:
(DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along
with associated Classifiers and PHS rules...
[02:26:19 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState:
(CmDocsisCtlThread)
[02:26:19 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Primary SID for usHwChannel 0 to 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 1
Updating US chan 8 data Profile test msg for Sid: 0x0.
Updating US chan 9 data Profile test msg for Sid: 0x0.
CM/DocsisCtl> [02:26:19 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL declared PULSE lost!
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=false
[02:26:20 01/01/1970] [CmDocsisCtlThread] BcmCmMultiDsHelper::PreRegDsChanChange:
target freq hz = 0
reason string = ErrorRecovery
CmInitReason = 16

Starting DS scanning...
[02:26:20 01/01/1970] [CmDocsisCtlThread] BcmCmDownstreamScan::StartScan: Starting
DS scan
Checking for cable cut...

CM/DocsisCtl> Plant power is 15.55

Cable connected

Scanning 548.000 MHz SC-QAM (Annex A(Eu.1M))


CM/DocsisCtl> Scanning 549.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 550.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 551.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 552.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 553.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 554.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 555.000 MHz SC-QAM (Annex A(Eu.1M)) locked SC-QAM
[02:26:23 01/01/1970] [CmDocsisCtlThread] BcmCmDsChan::DsLockOk: (BcmCmDsChan 0)
hwRxId=0 freq=0 dcid=0

******************************************
DOWNSTREAM STATUS
******************************************
HW Channel ID = 0
Phy type: SC-QAM
DS active chan settings:
ds chan id = 0
center freq, Hz = 555000000 Hz
primary capable = false
status event rpt bitmask = 0

CM HW Detected DS Phy Settings:


Center Freq, Hz = 555000000
QAM = Locked
FEC = Locked
Carrier Freq Offset, kHz = 0
Channel Width, Hz = 8000000
Modulation = Qam256
Interleaver = Taps12Incr17
Symbol Rate, sym/sec = 6952000

******************************************

[02:26:23 01/01/1970] [CmDocsisCtlThread]


BcmCmMacDomainSetsState::StartDsMacMddInit:
**********************************************
Waiting for MDDs...
**********************************************
BcmCmDocsisCtlMsgACT::HandleEvent() @time=8783760 event_code=4 (kCmPriDsMddSetsOk)

MDD diplexer band edge not specified.


MDD Plant US Frequency Range = extended.
Requested Spectrum = US:(0 MHz..85 MHz) DS:(0 MHz..0 MHz)
Best Match = 0: US:(5 MHz..85 MHz) DS:(108 MHz..1218 MHz)
Switchable diplexer ECN support disabled. NOT switching diplexer.
[02:26:23 01/01/1970] [CmDocsisCtlThread]
BcmCmMdDsSgDiscState::TrimSgSetWithoutThisDcid:
1 candidate MD-DS-SG remain after TrimSgSetWithoutThisDcid( target_dcid )
for target_dcid=0x04 (4)
[02:26:23 01/01/1970] [CmDocsisCtlThread] BcmCmMdDsSgDiscState::StartMdDsSgDisc:
special case: one and only one MD-DS-SG contains mdd_dcid.
fMdDsSgId=0x1d (29)
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , M-d++a+i-+Ty-eA+dA++e|:
i_L-ca+A++e|A: 1
Chec+ +D_A++e|A
Cha++e+ Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1

MD-DS-SG discovery info:

fCmMdDsSgDiscState = 6 (kMdDsSgDiscDone)
fMdDsSgId = 0x1d (29)
fMdDsSgDiscovered = true

Trimmed Candidate Downstream Service Group Settings List: list size = 1

sgid size member dcid's


---- ---- -------------
29 34 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
27 28 29 30 31 32 159 160

Downstream Active Channel Settings List:

dcid type frequency prim capable rpt enable mod/annex or PLC params
---- -------- --------- ------------ ---------- -----------------------
1 SC-QAM 531000000 y 0x36 256QAM/AnnexA
2 SC-QAM 539000000 y 0x36 256QAM/AnnexA
3 SC-QAM 547000000 y 0x36 256QAM/AnnexA
4 SC-QAM 555000000 y 0x36 256QAM/AnnexA
5 SC-QAM 563000000 y 0x36 256QAM/AnnexA
6 SC-QAM 571000000 y 0x36 256QAM/AnnexA
7 SC-QAM 579000000 y 0x36 256QAM/AnnexA
8 SC-QAM 587000000 y 0x36 256QAM/AnnexA
9 SC-QAM 595000000 y 0x36 256QAM/AnnexA
10 SC-QAM 603000000 y 0x36 256QAM/AnnexA
11 SC-QAM 611000000 y 0x36 256QAM/AnnexA
12 SC-QAM 619000000 y 0x36 256QAM/AnnexA
13 SC-QAM 627000000 y 0x36 256QAM/AnnexA
14 SC-QAM 635000000 y 0x36 256QAM/AnnexA
15 SC-QAM 643000000 y 0x36 256QAM/AnnexA
16 SC-QAM 651000000 y 0x36 256QAM/AnnexA
17 SC-QAM 659000000 y 0x36 256QAM/AnnexA
18 SC-QAM 667000000 y 0x36 256QAM/AnnexA
19 SC-QAM 675000000 y 0x36 256QAM/AnnexA
20 SC-QAM 683000000 y 0x36 256QAM/AnnexA
21 SC-QAM 691000000 y 0x36 256QAM/AnnexA
22 SC-QAM 699000000 y 0x36 256QAM/AnnexA
23 SC-QAM 707000000 y 0x36 256QAM/AnnexA
24 SC-QAM 715000000 y 0x36 256QAM/AnnexA
25 SC-QAM 723000000 y 0x36 256QAM/AnnexA
26 SC-QAM 731000000 y 0x36 256QAM/AnnexA
27 SC-QAM 739000000 y 0x36 256QAM/AnnexA
28 SC-QAM 747000000 y 0x36 256QAM/AnnexA
29 SC-QAM 755000000 y 0x36 256QAM/AnnexA
30 SC-QAM 763000000 y 0x36 256QAM/AnnexA
31 SC-QAM 771000000 y 0x36 256QAM/AnnexA
32 SC-QAM 779000000 y 0x36 256QAM/AnnexA
159 OFDM PLC 897000000 n 0x36 25Khz/5us/0.625us
160 OFDM PLC 361000000 n 0x36 50Khz/0.9375us/0.625us

Trimmed Downstream Ambiguity Resolution Frequency List: list size = 3


531000000-sc_qam 539000000-sc_qam 547000000-sc_qam

visible dcid set = 4

freq with visible dcid set = 555000000

BcmCmDocsisCtlMsgACT::HandleEvent() @time=8784360 event_code=11


(kCmMdDsSgDiscDone)
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=true
[02:26:24 01/01/1970] [CmDocsisCtlThread]
BcmDocsisCmHalIf::SetPrimaryDownstreamChannel: (DOCSIS CableModem HalIf)
Installing primary downstream channel index: 0
SetRatios called with primary downstream channel number = 0
AnnexMode[0] = 1 QAM_Mode[0] = 256
Num/Den = 869/1280
3390 SCDMA/OFDM mode - ChannelNumber = 0 Numerator = 869 Denominator = 1280
CM/DocsisCtl> [02:26:24 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL failed to acquire sync or lost sync!
... TCOFDM - DTR is now locked.... (T2=150ms Sync=14)

Given a 216 MHz TCOFDM clock, the nominal value for the DTR FCW is 0xC22E45067
The DTR FCW is 0xc22e98a2 - that value is good (6, within 100 ppm)
Kicked off the DPLL
LE Done bit was set
LE Done bit was set
SCQAM DS clock source.
PLL in Leaky mode.
PLL Fn = 6, k1 = 18, k2 = 19
[02:26:24 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context=1 (ErrorRecovery)
[02:26:24 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context is error recovery or startup.
Always use last good upstream target chan id=1
[02:26:24 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper) Locked on the downstream. Waiting for UCDs...
[02:26:24 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefFail: (Cm
Multi US Helper) target hwTxId=0
CM/DocsisCtl> [02:26:26 01/01/1970] [CmDocsisCtlThread]
BcmCmMultiUsHelper::TmUcdRxTimerEvent: (Cm Multi US Helper)
ucd gathering ok.

[02:26:26 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper) state at
entry:

Channel targeting:
Downstream:
fTargetDsFreqHz = 0 (0)
fCurrentDsFreqHz = 0x2114a0c0 (555000000)
fStoredDsFreqHz = 0x29020c00 (688000000)

Upstream:
fDestSingleTxTargetUsChanId = 0x1 (1)
fTargetingContext = 1 (ErrorRecovery)

Startup UCD Selection Info:

low priority candidate ucid list = 1 3 2 4 6 5 7 8


happy home ucid set = 1 2 3 4

Upstream Active Channel Settings:

ucid rpt enable sel prio MAP source dcid's


---- ---------- -------- -----------------
1 0x1c0 0
2 0x1c0 0
3 0x1c0 0
4 0x1c0 0
5 0x1c0 0
6 0x1c0 0
7 0x1c0 0
8 0x1c0 0

BcmCmUsTargetMset (a.k.a. usable UCDs gathered during startup):

us config
phy change ranging scdma
type ucid dcid count tried? enabled?
---- ---- ---- ------ ------- --------
3 1 4 4 n n
3 2 4 4 n n
3 3 4 4 n n
3 4 4 4 n n
3 5 4 4 n n
3 6 4 4 n n
3 7 4 4 n n
3 8 4 4 n n

[02:26:26 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper)
starting docs3 upstream initialization on target ucid=1
with upstream phy type 3 on hardware transmitter index 0

[02:26:26 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::ExecuteTccCmd: hwTxId=0


docs ucid=0
[02:26:26 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0
[02:26:26 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::InstallUsSets: Installing
UCD w/ucid for UCID=1 for CM hardware tx chan 0

[02:26:26 01/01/1970] [CmDocsisCtlThread]


BcmCmUsSetsState::TestAndLaunchUsTimeSync: starting upstream time sync
acquisition...
[02:26:26 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefOk: (Cm
Multi US Helper) target hwTxId=0
[02:26:26 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::UsTimeRefOk: upstream time
sync acquired for fHwTxId=0

== Beginning initial ranging for Docsis UCID 1 ==


Minimum transmit power is 17 dBmV
Maximum transmit power is 53 dBmV
Stored power level for UCID 1 is 39 dBmV
Using per transmitter stored initial upstream power = 39 dBmV hwTxId = 0 docsis
UCID = 1
RNG-RSP UsChanId=1 Adj: tim=1982 freq=-31 Stat=Continue (CmdPwr (UsChanId-dBmV):
(1-41.25) )
[02:26:27 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0xc9
RNG-RSP UsChanId=1 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (1-
41.25) )
RNG-RSP UsChanId=1 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (1-
41.25) )
RNG-RSP UsChanId=1 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (1-
41.25) )
RNG-RSP UsChanId=1 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (1-
41.25) )
RNG-RSP UsChanId=1 Adj: tim=0 freq=0 Stat=Success (CmdPwr (UsChanId-dBmV): (1-
41.25) )
[02:26:32 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::FirstRngSuccess:
(CmDocsisCtlThread)
first RNG-RSP w/status==SUCCESS for hwTxId=0 and DOCSIS ucid=1
[02:26:32 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::LaunchEaeBpkm:
(CmDocsisCtlThread) BPKM enabled. starting Early Authentication and Encryption BPKM
key requests. Primary Sid = 201
CM/DocsisCtl> Bandwidth request failure! Status = 0

BcmCmUsChanTimerMuxACT::HandleEvent() @time=8982020 fTimerType=5


(kT4NoStationMaint) hwTxId=0 docs ucid=1
[02:29:42 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::T4NoStationMaintEvent: ERROR - no Station Maint map op error.
hwTxId=0 docs ucid=1
[02:29:42 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::CommonRngErrorHandler: reason=10 (T4NoStationMaintTimeout)
hwTxId=0 docs ucid=1
[02:29:42 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) Purging DS
frequency 555000000 from current scan pass due to pre-registration restart error
[02:29:42 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) reinit MAC #40:
T4NoStationMaintTimeout

[02:29:42 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::Reset:


(CmDocsisCtlThread) DefaultSnmpAgentClass::RestartPendingEvent for Vendor CM
Agent w/ BRCM Factory Support
Logging event: Received Response to Broadcast Maintenance Request, But no Unicast
Maintenance opportunities received - T4 time out;CM-MAC=fc:4a:e9:de:ad:88;CMTS-
MAC=28:52:61:fa:d8:78;CM-QOS=1.1;CM-VER=3.1;
Vendor CM Agent w/ BRCM Factory Support updating ifTableLastChange.
Vendor CM Agent w/ BRCM Factory Support resetting to default state.
Vendor CM Agent w/ BRCM Factory Support destroying users...
Vendor CM Agent w/ BRCM Factory Support destroying notifies...
Vendor CM Agent w/ BRCM Factory Support destroying views...
Allowing DOCS-CABLE-DEVICE-MIB IP filters.
Vendor CM Agent w/ BRCM Factory Support deferring traps.
CM/DocsisCtl> Received RG Event 0x80000001 State 0x1
eRouter Linux WAN Down
[02:29:42 01/01/1970] [eRouterMsgPipe] eRouterMsgPipe::UpdateIpNetToMediaEntry:
(eRouterMsgPipe) eRouter IP address:0.0.0.0
02:29:42.310 01/01/1970 (CALC) mtaCmStatusInfo() - MTA is Signaled: *NOT-
OPERATIONAL* (Stat=0x1) emtaCurState = 0.
EmtaSnmpAgent::SoftReset
Pausing trap thread
emta factory agentResetting to default state.
emta factory agent destroying users...
emta factory agent destroying notifies...
emta factory agent destroying views...
emta factory agent entering RFC-2576 Coexistence security mode.
emta factory agent entering Basic/Hybrid flow provisioning mode.
Resuming trap thread
Stopping DHCP/ToD/TFTP (client requested)...
[02:29:42 01/01/1970] [CmDocsisIpThread] BcmEcosIpHalIf::RemoveIpv6Address: (IP
Stack1 HalIf) ERROR - Failed to remove IPv6 address fe80::fe4a:e9ff:fede:ad88/64
from the stack!
[02:29:42 01/01/1970] [CmDocsisIpThread] BcmDhcpV6ClientIf::ReleaseAddresses:
(DHCPv6 ClientIf for IP Stack1) ERROR - IA state is initial; there is no address to
release.
BcmDocsis3DsMacEnableMulticastDsidForwarding 0; primary DS = 0
SCQAM DSID filter control = 0x00
OFDM DSID filter control = 0x01
CM/DocsisCtl> Deleting DOCSIS 1.0 CoS Settings for SID 0xc9
[02:29:42 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows:
(DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along
with associated Classifiers and PHS rules...
[02:29:42 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState:
(CmDocsisCtlThread)
[02:29:42 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Primary SID for usHwChannel 0 to 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 1
Updating US chan 8 data Profile test msg for Sid: 0x0.
Updating US chan 9 data Profile test msg for Sid: 0x0.
CM/DocsisCtl> [02:29:43 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL declared PULSE lost!
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=false
[02:29:43 01/01/1970] [CmDocsisCtlThread] BcmCmMultiDsHelper::PreRegDsChanChange:
target freq hz = 0
reason string = ErrorRecovery
CmInitReason = 16

Starting DS scanning...
[02:29:43 01/01/1970] [CmDocsisCtlThread] BcmCmDownstreamScan::StartScan: Starting
DS scan
Checking for cable cut...

CM/DocsisCtl> Plant power is 15.65

Cable connected

CM/DocsisCtl> Scanning 556.000 MHz SC-QAM (Annex A(Eu.1M))


Scanning 557.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 558.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 559.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 560.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 561.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 562.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 563.000 MHz SC-QAM (Annex A(Eu.1M)) locked SC-QAM
[02:29:46 01/01/1970] [CmDocsisCtlThread] BcmCmDsChan::DsLockOk: (BcmCmDsChan 0)
hwRxId=0 freq=0 dcid=0

******************************************
DOWNSTREAM STATUS
******************************************
HW Channel ID = 0
Phy type: SC-QAM
DS active chan settings:
ds chan id = 0
center freq, Hz = 563000000 Hz
primary capable = false
status event rpt bitmask = 0

CM HW Detected DS Phy Settings:


Center Freq, Hz = 563000000
QAM = Locked
FEC = Locked
Carrier Freq Offset, kHz = 0
Channel Width, Hz = 8000000
Modulation = Qam256
Interleaver = Taps12Incr17
Symbol Rate, sym/sec = 6952000

******************************************

[02:29:46 01/01/1970] [CmDocsisCtlThread]


BcmCmMacDomainSetsState::StartDsMacMddInit:
**********************************************
Waiting for MDDs...
**********************************************

CM/DocsisCtl>
BcmCmDocsisCtlMsgACT::HandleEvent() @time=8987760 event_code=4 (kCmPriDsMddSetsOk)

MDD diplexer band edge not specified.


MDD Plant US Frequency Range = extended.
Requested Spectrum = US:(0 MHz..85 MHz) DS:(0 MHz..0 MHz)
Best Match = 0: US:(5 MHz..85 MHz) DS:(108 MHz..1218 MHz)
Switchable diplexer ECN support disabled. NOT switching diplexer.
[02:29:47 01/01/1970] [CmDocsisCtlThread]
BcmCmMdDsSgDiscState::TrimSgSetWithoutThisDcid:
1 candidate MD-DS-SG remain after TrimSgSetWithoutThisDcid( target_dcid )
for target_dcid=0x05 (5)
[02:29:47 01/01/1970] [CmDocsisCtlThread] BcmCmMdDsSgDiscState::StartMdDsSgDisc:
special case: one and only one MD-DS-SG contains mdd_dcid.
fMdDsSgId=0x1d (29)
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , M-d++a+i-+Ty-eA+dA++e|:
i_L-ca+A++e|A: 1
Chec+ +D_A++e|A
Cha++e+ Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1

MD-DS-SG discovery info:

fCmMdDsSgDiscState = 6 (kMdDsSgDiscDone)
fMdDsSgId = 0x1d (29)
fMdDsSgDiscovered = true

Trimmed Candidate Downstream Service Group Settings List: list size = 1

sgid size member dcid's


---- ---- -------------
29 34 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
27 28 29 30 31 32 159 160

Downstream Active Channel Settings List:

dcid type frequency prim capable rpt enable mod/annex or PLC params
---- -------- --------- ------------ ---------- -----------------------
1 SC-QAM 531000000 y 0x36 256QAM/AnnexA
2 SC-QAM 539000000 y 0x36 256QAM/AnnexA
3 SC-QAM 547000000 y 0x36 256QAM/AnnexA
4 SC-QAM 555000000 y 0x36 256QAM/AnnexA
5 SC-QAM 563000000 y 0x36 256QAM/AnnexA
6 SC-QAM 571000000 y 0x36 256QAM/AnnexA
7 SC-QAM 579000000 y 0x36 256QAM/AnnexA
8 SC-QAM 587000000 y 0x36 256QAM/AnnexA
9 SC-QAM 595000000 y 0x36 256QAM/AnnexA
10 SC-QAM 603000000 y 0x36 256QAM/AnnexA
11 SC-QAM 611000000 y 0x36 256QAM/AnnexA
12 SC-QAM 619000000 y 0x36 256QAM/AnnexA
13 SC-QAM 627000000 y 0x36 256QAM/AnnexA
14 SC-QAM 635000000 y 0x36 256QAM/AnnexA
15 SC-QAM 643000000 y 0x36 256QAM/AnnexA
16 SC-QAM 651000000 y 0x36 256QAM/AnnexA
17 SC-QAM 659000000 y 0x36 256QAM/AnnexA
18 SC-QAM 667000000 y 0x36 256QAM/AnnexA
19 SC-QAM 675000000 y 0x36 256QAM/AnnexA
20 SC-QAM 683000000 y 0x36 256QAM/AnnexA
21 SC-QAM 691000000 y 0x36 256QAM/AnnexA
22 SC-QAM 699000000 y 0x36 256QAM/AnnexA
23 SC-QAM 707000000 y 0x36 256QAM/AnnexA
24 SC-QAM 715000000 y 0x36 256QAM/AnnexA
25 SC-QAM 723000000 y 0x36 256QAM/AnnexA
26 SC-QAM 731000000 y 0x36 256QAM/AnnexA
27 SC-QAM 739000000 y 0x36 256QAM/AnnexA
28 SC-QAM 747000000 y 0x36 256QAM/AnnexA
29 SC-QAM 755000000 y 0x36 256QAM/AnnexA
30 SC-QAM 763000000 y 0x36 256QAM/AnnexA
31 SC-QAM 771000000 y 0x36 256QAM/AnnexA
32 SC-QAM 779000000 y 0x36 256QAM/AnnexA
159 OFDM PLC 897000000 n 0x36 25Khz/5us/0.625us
160 OFDM PLC 361000000 n 0x36 50Khz/0.9375us/0.625us

Trimmed Downstream Ambiguity Resolution Frequency List: list size = 3

531000000-sc_qam 539000000-sc_qam 547000000-sc_qam

visible dcid set = 5

freq with visible dcid set = 563000000

BcmCmDocsisCtlMsgACT::HandleEvent() @time=8988360 event_code=11


(kCmMdDsSgDiscDone)
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=true
[02:29:48 01/01/1970] [CmDocsisCtlThread]
BcmDocsisCmHalIf::SetPrimaryDownstreamChannel: (DOCSIS CableModem HalIf)
Installing primary downstream channel index: 0
SetRatios called with primary downstream channel number = 0
AnnexMode[0] = 1 QAM_Mode[0] = 256
Num/Den = 869/1280
3390 SCDMA/OFDM mode - ChannelNumber = 0 Numerator = 869 Denominator = 1280
CM/DocsisCtl> [02:29:48 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL failed to acquire sync or lost sync!
... TCOFDM - DTR is now locked.... (T2=150ms Sync=14)

Given a 216 MHz TCOFDM clock, the nominal value for the DTR FCW is 0xC22E45067
The DTR FCW is 0xc22eae5e - that value is good (8, within 100 ppm)
Kicked off the DPLL
LE Done bit was set
LE Done bit was set
SCQAM DS clock source.
PLL in Leaky mode.
PLL Fn = 6, k1 = 18, k2 = 19
[02:29:48 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context=1 (ErrorRecovery)
[02:29:48 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context is error recovery or startup.
Always use last good upstream target chan id=1
[02:29:48 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper) Locked on the downstream. Waiting for UCDs...
[02:29:48 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefFail: (Cm
Multi US Helper) target hwTxId=0
CM/DocsisCtl> [02:29:50 01/01/1970] [CmDocsisCtlThread]
BcmCmMultiUsHelper::TmUcdRxTimerEvent: (Cm Multi US Helper)
ucd gathering ok.

[02:29:50 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper) state at
entry:

Channel targeting:
Downstream:
fTargetDsFreqHz = 0 (0)
fCurrentDsFreqHz = 0x218eb2c0 (563000000)
fStoredDsFreqHz = 0x29020c00 (688000000)

Upstream:
fDestSingleTxTargetUsChanId = 0x1 (1)
fTargetingContext = 1 (ErrorRecovery)

Startup UCD Selection Info:

low priority candidate ucid list = 2 3 1 4 8 7 6 5


happy home ucid set = 1 2 3 4

Upstream Active Channel Settings:

ucid rpt enable sel prio MAP source dcid's


---- ---------- -------- -----------------
1 0x1c0 0
2 0x1c0 0
3 0x1c0 0
4 0x1c0 0
5 0x1c0 0
6 0x1c0 0
7 0x1c0 0
8 0x1c0 0

BcmCmUsTargetMset (a.k.a. usable UCDs gathered during startup):

us config
phy change ranging scdma
type ucid dcid count tried? enabled?
---- ---- ---- ------ ------- --------
3 1 5 4 n n
3 2 5 4 n n
3 3 5 4 n n
3 4 5 4 n n
3 5 5 4 n n
3 6 5 4 n n
3 7 5 4 n n
3 8 5 4 n n

[02:29:50 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper)
starting docs3 upstream initialization on target ucid=2
with upstream phy type 3 on hardware transmitter index 0

[02:29:50 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::ExecuteTccCmd: hwTxId=0


docs ucid=0
[02:29:50 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0
[02:29:50 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::InstallUsSets: Installing
UCD w/ucid for UCID=2 for CM hardware tx chan 0

[02:29:50 01/01/1970] [CmDocsisCtlThread]


BcmCmUsSetsState::TestAndLaunchUsTimeSync: starting upstream time sync
acquisition...
[02:29:50 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefOk: (Cm
Multi US Helper) target hwTxId=0
[02:29:50 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::UsTimeRefOk: upstream time
sync acquired for fHwTxId=0

== Beginning initial ranging for Docsis UCID 2 ==


Minimum transmit power is 17 dBmV
Maximum transmit power is 53 dBmV
Stored power level for UCID 2 is 38 dBmV
Using per transmitter stored initial upstream power = 38 dBmV hwTxId = 0 docsis
UCID = 2
RNG-RSP UsChanId=2 Adj: tim=1883 freq=-26 Stat=Continue (CmdPwr (UsChanId-dBmV):
(2-40.50) )
[02:29:51 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0xc9
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (2-
41.00) )
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (2-
41.00) )
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (2-
41.00) )
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (2-
41.00) )
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Success (CmdPwr (UsChanId-dBmV): (2-
41.00) )
[02:29:56 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::FirstRngSuccess:
(CmDocsisCtlThread)
first RNG-RSP w/status==SUCCESS for hwTxId=0 and DOCSIS ucid=2
[02:29:56 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::LaunchEaeBpkm:
(CmDocsisCtlThread) BPKM enabled. starting Early Authentication and Encryption BPKM
key requests. Primary Sid = 201
CM/DocsisCtl> Bandwidth request failure! Status = 0
BcmCmUsChanTimerMuxACT::HandleEvent() @time=9186060 fTimerType=5
(kT4NoStationMaint) hwTxId=0 docs ucid=2
[02:33:06 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::T4NoStationMaintEvent: ERROR - no Station Maint map op error.
hwTxId=0 docs ucid=2
[02:33:06 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::CommonRngErrorHandler: reason=10 (T4NoStationMaintTimeout)
hwTxId=0 docs ucid=2
[02:33:06 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) Purging DS
frequency 563000000 from current scan pass due to pre-registration restart error
[02:33:06 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) reinit MAC #41:
T4NoStationMaintTimeout

[02:33:06 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::Reset:


(CmDocsisCtlThread) DefaultSnmpAgentClass::RestartPendingEvent for Vendor CM
Agent w/ BRCM Factory Support
Logging event: Received Response to Broadcast Maintenance Request, But no Unicast
Maintenance opportunities received - T4 time out;CM-MAC=fc:4a:e9:de:ad:88;CMTS-
MAC=28:52:61:fa:d8:78;CM-QOS=1.1;CM-VER=3.1;
Vendor CM Agent w/ BRCM Factory Support updating ifTableLastChange.
Vendor CM Agent w/ BRCM Factory Support resetting to default state.
Vendor CM Agent w/ BRCM Factory Support destroying users...
Vendor CM Agent w/ BRCM Factory Support destroying notifies...
Vendor CM Agent w/ BRCM Factory Support destroying views...
Allowing DOCS-CABLE-DEVICE-MIB IP filters.
Vendor CM Agent w/ BRCM Factory Support deferring traps.
Received RG Event 0x80000001 State 0x1
eRouter Linux WAN Down
[02:33:06 01/01/1970] [eRouterMsgPipe] eRouterMsgPipe::UpdateIpNetToMediaEntry:
(eRouterMsgPipe) eRouter IP address:0.0.0.0
02:33:06.360 01/01/1970 (CALC) mtaCmStatusInfo() - MTA is Signaled: *NOT-
OPERATIONAL* (Stat=0x1) emtaCurState = 0.
EmtaSnmpAgent::SoftReset
Pausing trap thread
emta factory agentResetting to default state.
emta factory agent destroying users...
emta factory agent destroying notifies...
emta factory agent destroying views...
emta factory agent entering RFC-2576 Coexistence security mode.
emta factory agent entering Basic/Hybrid flow provisioning mode.
Resuming trap thread
Stopping DHCP/ToD/TFTP (client requested)...
[02:33:06 01/01/1970] [CmDocsisIpThread] BcmEcosIpHalIf::RemoveIpv6Address: (IP
Stack1 HalIf) ERROR - Failed to remove IPv6 address fe80::fe4a:e9ff:fede:ad88/64
from the stack!
[02:33:06 01/01/1970] [CmDocsisIpThread] BcmDhcpV6ClientIf::ReleaseAddresses:
(DHCPv6 ClientIf for IP Stack1) ERROR - IA state is initial; there is no address to
release.
BcmDocsis3DsMacEnableMulticastDsidForwarding 0; primary DS = 0
SCQAM DSID filter control = 0x00
OFDM DSID filter control = 0x01
Deleting DOCSIS 1.0 CoS Settings for SID 0xc9
[02:33:06 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows:
(DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along
with associated Classifiers and PHS rules...
[02:33:06 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState:
(CmDocsisCtlThread)
[02:33:06 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Primary SID for usHwChannel 0 to 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 1
Updating US chan 8 data Profile test msg for Sid: 0x0.
Updating US chan 9 data Profile test msg for Sid: 0x0.
CM/DocsisCtl> [02:33:07 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL declared PULSE lost!
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=false
[02:33:07 01/01/1970] [CmDocsisCtlThread] BcmCmMultiDsHelper::PreRegDsChanChange:
target freq hz = 0
reason string = ErrorRecovery
CmInitReason = 16

Starting DS scanning...
[02:33:07 01/01/1970] [CmDocsisCtlThread] BcmCmDownstreamScan::StartScan: Starting
DS scan
Checking for cable cut...

CM/DocsisCtl> Plant power is 15.65

Cable connected

Scanning 564.000 MHz SC-QAM (Annex A(Eu.1M))


CM/DocsisCtl> Scanning 565.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 566.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 567.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 568.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 569.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 570.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 571.000 MHz SC-QAM (Annex A(Eu.1M)) locked SC-QAM
[02:33:10 01/01/1970] [CmDocsisCtlThread] BcmCmDsChan::DsLockOk: (BcmCmDsChan 0)
hwRxId=0 freq=0 dcid=0

******************************************
DOWNSTREAM STATUS
******************************************
HW Channel ID = 0
Phy type: SC-QAM
DS active chan settings:
ds chan id = 0
center freq, Hz = 571000000 Hz
primary capable = false
status event rpt bitmask = 0

CM HW Detected DS Phy Settings:


Center Freq, Hz = 571000000
QAM = Locked
FEC = Locked
Carrier Freq Offset, kHz = 0
Channel Width, Hz = 8000000
Modulation = Qam256
Interleaver = Taps12Incr17
Symbol Rate, sym/sec = 6952000
******************************************

[02:33:10 01/01/1970] [CmDocsisCtlThread]


BcmCmMacDomainSetsState::StartDsMacMddInit:
**********************************************
Waiting for MDDs...
**********************************************

CM/DocsisCtl>
BcmCmDocsisCtlMsgACT::HandleEvent() @time=9191760 event_code=4 (kCmPriDsMddSetsOk)

MDD diplexer band edge not specified.


MDD Plant US Frequency Range = extended.
Requested Spectrum = US:(0 MHz..85 MHz) DS:(0 MHz..0 MHz)
Best Match = 0: US:(5 MHz..85 MHz) DS:(108 MHz..1218 MHz)
Switchable diplexer ECN support disabled. NOT switching diplexer.
[02:33:11 01/01/1970] [CmDocsisCtlThread]
BcmCmMdDsSgDiscState::TrimSgSetWithoutThisDcid:
1 candidate MD-DS-SG remain after TrimSgSetWithoutThisDcid( target_dcid )
for target_dcid=0x06 (6)
[02:33:11 01/01/1970] [CmDocsisCtlThread] BcmCmMdDsSgDiscState::StartMdDsSgDisc:
special case: one and only one MD-DS-SG contains mdd_dcid.
fMdDsSgId=0x1d (29)
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , M-d++a+i-+Ty-eA+dA++e|:
i_L-ca+A++e|A: 1
Chec+ +D_A++e|A
Cha++e+ Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1

MD-DS-SG discovery info:

fCmMdDsSgDiscState = 6 (kMdDsSgDiscDone)
fMdDsSgId = 0x1d (29)
fMdDsSgDiscovered = true

Trimmed Candidate Downstream Service Group Settings List: list size = 1

sgid size member dcid's


---- ---- -------------
29 34 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
27 28 29 30 31 32 159 160

Downstream Active Channel Settings List:

dcid type frequency prim capable rpt enable mod/annex or PLC params
---- -------- --------- ------------ ---------- -----------------------
1 SC-QAM 531000000 y 0x36 256QAM/AnnexA
2 SC-QAM 539000000 y 0x36 256QAM/AnnexA
3 SC-QAM 547000000 y 0x36 256QAM/AnnexA
4 SC-QAM 555000000 y 0x36 256QAM/AnnexA
5 SC-QAM 563000000 y 0x36 256QAM/AnnexA
6 SC-QAM 571000000 y 0x36 256QAM/AnnexA
7 SC-QAM 579000000 y 0x36 256QAM/AnnexA
8 SC-QAM 587000000 y 0x36 256QAM/AnnexA
9 SC-QAM 595000000 y 0x36 256QAM/AnnexA
10 SC-QAM 603000000 y 0x36 256QAM/AnnexA
11 SC-QAM 611000000 y 0x36 256QAM/AnnexA
12 SC-QAM 619000000 y 0x36 256QAM/AnnexA
13 SC-QAM 627000000 y 0x36 256QAM/AnnexA
14 SC-QAM 635000000 y 0x36 256QAM/AnnexA
15 SC-QAM 643000000 y 0x36 256QAM/AnnexA
16 SC-QAM 651000000 y 0x36 256QAM/AnnexA
17 SC-QAM 659000000 y 0x36 256QAM/AnnexA
18 SC-QAM 667000000 y 0x36 256QAM/AnnexA
19 SC-QAM 675000000 y 0x36 256QAM/AnnexA
20 SC-QAM 683000000 y 0x36 256QAM/AnnexA
21 SC-QAM 691000000 y 0x36 256QAM/AnnexA
22 SC-QAM 699000000 y 0x36 256QAM/AnnexA
23 SC-QAM 707000000 y 0x36 256QAM/AnnexA
24 SC-QAM 715000000 y 0x36 256QAM/AnnexA
25 SC-QAM 723000000 y 0x36 256QAM/AnnexA
26 SC-QAM 731000000 y 0x36 256QAM/AnnexA
27 SC-QAM 739000000 y 0x36 256QAM/AnnexA
28 SC-QAM 747000000 y 0x36 256QAM/AnnexA
29 SC-QAM 755000000 y 0x36 256QAM/AnnexA
30 SC-QAM 763000000 y 0x36 256QAM/AnnexA
31 SC-QAM 771000000 y 0x36 256QAM/AnnexA
32 SC-QAM 779000000 y 0x36 256QAM/AnnexA
159 OFDM PLC 897000000 n 0x36 25Khz/5us/0.625us
160 OFDM PLC 361000000 n 0x36 50Khz/0.9375us/0.625us

Trimmed Downstream Ambiguity Resolution Frequency List: list size = 3

531000000-sc_qam 539000000-sc_qam 547000000-sc_qam

visible dcid set = 6

freq with visible dcid set = 571000000

BcmCmDocsisCtlMsgACT::HandleEvent() @time=9192360 event_code=11


(kCmMdDsSgDiscDone)
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=true
[02:33:12 01/01/1970] [CmDocsisCtlThread]
BcmDocsisCmHalIf::SetPrimaryDownstreamChannel: (DOCSIS CableModem HalIf)
Installing primary downstream channel index: 0
SetRatios called with primary downstream channel number = 0
AnnexMode[0] = 1 QAM_Mode[0] = 256
Num/Den = 869/1280
3390 SCDMA/OFDM mode - ChannelNumber = 0 Numerator = 869 Denominator = 1280
CM/DocsisCtl> [02:33:12 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL failed to acquire sync or lost sync!
... TCOFDM - DTR is now locked.... (T2=150ms Sync=14)

Given a 216 MHz TCOFDM clock, the nominal value for the DTR FCW is 0xC22E45067
The DTR FCW is 0xc22eb5bf - that value is good (8, within 100 ppm)
Kicked off the DPLL
LE Done bit was set
LE Done bit was set
SCQAM DS clock source.
PLL in Leaky mode.
PLL Fn = 6, k1 = 18, k2 = 19
[02:33:12 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context=1 (ErrorRecovery)
[02:33:12 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context is error recovery or startup.
Always use last good upstream target chan id=1
[02:33:12 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper) Locked on the downstream. Waiting for UCDs...
[02:33:12 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefFail: (Cm
Multi US Helper) target hwTxId=0
CM/DocsisCtl> [02:33:14 01/01/1970] [CmDocsisCtlThread]
BcmCmMultiUsHelper::TmUcdRxTimerEvent: (Cm Multi US Helper)
ucd gathering ok.

[02:33:14 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper) state at
entry:

Channel targeting:
Downstream:
fTargetDsFreqHz = 0 (0)
fCurrentDsFreqHz = 0x2208c4c0 (571000000)
fStoredDsFreqHz = 0x29020c00 (688000000)

Upstream:
fDestSingleTxTargetUsChanId = 0x1 (1)
fTargetingContext = 1 (ErrorRecovery)

Startup UCD Selection Info:

low priority candidate ucid list = 1 4 2 3 5 8 7 6


happy home ucid set = 1 2 3 4

Upstream Active Channel Settings:

ucid rpt enable sel prio MAP source dcid's


---- ---------- -------- -----------------
1 0x1c0 0
2 0x1c0 0
3 0x1c0 0
4 0x1c0 0
5 0x1c0 0
6 0x1c0 0
7 0x1c0 0
8 0x1c0 0

BcmCmUsTargetMset (a.k.a. usable UCDs gathered during startup):

us config
phy change ranging scdma
type ucid dcid count tried? enabled?
---- ---- ---- ------ ------- --------
3 1 6 4 n n
3 2 6 4 n n
3 3 6 4 n n
3 4 6 4 n n
3 5 6 4 n n
3 6 6 4 n n
3 7 6 4 n n
3 8 6 4 n n

[02:33:14 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper)
starting docs3 upstream initialization on target ucid=1
with upstream phy type 3 on hardware transmitter index 0

[02:33:14 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::ExecuteTccCmd: hwTxId=0


docs ucid=0
[02:33:14 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0
[02:33:14 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::InstallUsSets: Installing
UCD w/ucid for UCID=1 for CM hardware tx chan 0

[02:33:14 01/01/1970] [CmDocsisCtlThread]


BcmCmUsSetsState::TestAndLaunchUsTimeSync: starting upstream time sync
acquisition...
[02:33:14 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefOk: (Cm
Multi US Helper) target hwTxId=0
[02:33:14 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::UsTimeRefOk: upstream time
sync acquired for fHwTxId=0

== Beginning initial ranging for Docsis UCID 1 ==


Minimum transmit power is 17 dBmV
Maximum transmit power is 53 dBmV
Stored power level for UCID 1 is 39 dBmV
Using per transmitter stored initial upstream power = 39 dBmV hwTxId = 0 docsis
UCID = 1
RNG-RSP UsChanId=1 Adj: tim=1928 freq=17 Stat=Continue (CmdPwr (UsChanId-dBmV):
(1-41.25) )
[02:33:15 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0xc9
RNG-RSP UsChanId=1 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (1-
41.25) )
RNG-RSP UsChanId=1 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (1-
41.25) )
RNG-RSP UsChanId=1 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (1-
41.25) )
RNG-RSP UsChanId=1 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (1-
41.25) )
RNG-RSP UsChanId=1 Adj: tim=0 freq=0 Stat=Success (CmdPwr (UsChanId-dBmV): (1-
41.25) )
[02:33:20 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::FirstRngSuccess:
(CmDocsisCtlThread)
first RNG-RSP w/status==SUCCESS for hwTxId=0 and DOCSIS ucid=1
[02:33:20 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::LaunchEaeBpkm:
(CmDocsisCtlThread) BPKM enabled. starting Early Authentication and Encryption BPKM
key requests. Primary Sid = 201
CM/DocsisCtl> Bandwidth request failure! Status = 0

BcmCmUsChanTimerMuxACT::HandleEvent() @time=9390600 fTimerType=5


(kT4NoStationMaint) hwTxId=0 docs ucid=1
[02:36:30 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::T4NoStationMaintEvent: ERROR - no Station Maint map op error.
hwTxId=0 docs ucid=1
[02:36:30 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::CommonRngErrorHandler: reason=10 (T4NoStationMaintTimeout)
hwTxId=0 docs ucid=1
[02:36:30 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) Purging DS
frequency 571000000 from current scan pass due to pre-registration restart error
[02:36:30 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) reinit MAC #42:
T4NoStationMaintTimeout

[02:36:30 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::Reset:


(CmDocsisCtlThread) DefaultSnmpAgentClass::RestartPendingEvent for Vendor CM
Agent w/ BRCM Factory Support
Logging event: Received Response to Broadcast Maintenance Request, But no Unicast
Maintenance opportunities received - T4 time out;CM-MAC=fc:4a:e9:de:ad:88;CMTS-
MAC=28:52:61:fa:d8:78;CM-QOS=1.1;CM-VER=3.1;
Vendor CM Agent w/ BRCM Factory Support updating ifTableLastChange.
Vendor CM Agent w/ BRCM Factory Support resetting to default state.
Vendor CM Agent w/ BRCM Factory Support destroying users...
Vendor CM Agent w/ BRCM Factory Support destroying notifies...
Vendor CM Agent w/ BRCM Factory Support destroying views...
Allowing DOCS-CABLE-DEVICE-MIB IP filters.
Vendor CM Agent w/ BRCM Factory Support deferring traps.
Received RG Event 0x80000001 State 0x1
eRouter Linux WAN Down
[02:36:30 01/01/1970] [eRouterMsgPipe] eRouterMsgPipe::UpdateIpNetToMediaEntry:
(eRouterMsgPipe) eRouter IP address:0.0.0.0
02:36:30.890 01/01/1970 (CALC) mtaCmStatusInfo() - MTA is Signaled: *NOT-
OPERATIONAL* (Stat=0x1) emtaCurState = 0.
EmtaSnmpAgent::SoftReset
Pausing trap thread
emta factory agentResetting to default state.
emta factory agent destroying users...
emta factory agent destroying notifies...
emta factory agent destroying views...
emta factory agent entering RFC-2576 Coexistence security mode.
emta factory agent entering Basic/Hybrid flow provisioning mode.
Resuming trap thread
Stopping DHCP/ToD/TFTP (client requested)...
[02:36:30 01/01/1970] [CmDocsisIpThread] BcmEcosIpHalIf::RemoveIpv6Address: (IP
Stack1 HalIf) ERROR - Failed to remove IPv6 address fe80::fe4a:e9ff:fede:ad88/64
from the stack!
[02:36:30 01/01/1970] [CmDocsisIpThread] BcmDhcpV6ClientIf::ReleaseAddresses:
(DHCPv6 ClientIf for IP Stack1) ERROR - IA state is initial; there is no address to
release.
BcmDocsis3DsMacEnableMulticastDsidForwarding 0; primary DS = 0
SCQAM DSID filter control = 0x00
OFDM DSID filter control = 0x01
Deleting DOCSIS 1.0 CoS Settings for SID 0xc9
[02:36:31 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows:
(DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along
with associated Classifiers and PHS rules...
[02:36:31 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState:
(CmDocsisCtlThread)
[02:36:31 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Primary SID for usHwChannel 0 to 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 1
Updating US chan 8 data Profile test msg for Sid: 0x0.
Updating US chan 9 data Profile test msg for Sid: 0x0.
CM/DocsisCtl> [02:36:31 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL declared PULSE lost!
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=false
[02:36:32 01/01/1970] [CmDocsisCtlThread] BcmCmMultiDsHelper::PreRegDsChanChange:
target freq hz = 0
reason string = ErrorRecovery
CmInitReason = 16

Starting DS scanning...
[02:36:32 01/01/1970] [CmDocsisCtlThread] BcmCmDownstreamScan::StartScan: Starting
DS scan
Checking for cable cut...

CM/DocsisCtl> Plant power is 15.55

Cable connected
CM/DocsisCtl> Scanning 572.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 573.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 574.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 575.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 576.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 577.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 578.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 579.000 MHz SC-QAM (Annex A(Eu.1M)) locked SC-QAM
[02:36:35 01/01/1970] [CmDocsisCtlThread] BcmCmDsChan::DsLockOk: (BcmCmDsChan 0)
hwRxId=0 freq=0 dcid=0

******************************************
DOWNSTREAM STATUS
******************************************
HW Channel ID = 0
Phy type: SC-QAM
DS active chan settings:
ds chan id = 0
center freq, Hz = 579000000 Hz
primary capable = false
status event rpt bitmask = 0

CM HW Detected DS Phy Settings:


Center Freq, Hz = 579000000
QAM = Locked
FEC = Locked
Carrier Freq Offset, kHz = 0
Channel Width, Hz = 8000000
Modulation = Qam256
Interleaver = Taps12Incr17
Symbol Rate, sym/sec = 6952000

******************************************

[02:36:35 01/01/1970] [CmDocsisCtlThread]


BcmCmMacDomainSetsState::StartDsMacMddInit:
**********************************************
Waiting for MDDs...
**********************************************

BcmCmDocsisCtlMsgACT::HandleEvent() @time=9395760 event_code=4 (kCmPriDsMddSetsOk)

MDD diplexer band edge not specified.


MDD Plant US Frequency Range = extended.
Requested Spectrum = US:(0 MHz..85 MHz) DS:(0 MHz..0 MHz)
Best Match = 0: US:(5 MHz..85 MHz) DS:(108 MHz..1218 MHz)
Switchable diplexer ECN support disabled. NOT switching diplexer.
[02:36:35 01/01/1970] [CmDocsisCtlThread]
BcmCmMdDsSgDiscState::TrimSgSetWithoutThisDcid:
1 candidate MD-DS-SG remain after TrimSgSetWithoutThisDcid( target_dcid )
for target_dcid=0x07 (7)
[02:36:35 01/01/1970] [CmDocsisCtlThread] BcmCmMdDsSgDiscState::StartMdDsSgDisc:
special case: one and only one MD-DS-SG contains mdd_dcid.
fMdDsSgId=0x1d (29)
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , M-d++a+i-+Ty-eA+dA++e|:
i_L-ca+A++e|A: 1
Chec+ +D_A++e|A
Cha++e+ Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1

MD-DS-SG discovery info:

fCmMdDsSgDiscState = 6 (kMdDsSgDiscDone)
fMdDsSgId = 0x1d (29)
fMdDsSgDiscovered = true

Trimmed Candidate Downstream Service Group Settings List: list size = 1

sgid size member dcid's


---- ---- -------------
29 34 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
27 28 29 30 31 32 159 160

Downstream Active Channel Settings List:


dcid type frequency prim capable rpt enable mod/annex or PLC params
---- -------- --------- ------------ ---------- -----------------------
1 SC-QAM 531000000 y 0x36 256QAM/AnnexA
2 SC-QAM 539000000 y 0x36 256QAM/AnnexA
3 SC-QAM 547000000 y 0x36 256QAM/AnnexA
4 SC-QAM 555000000 y 0x36 256QAM/AnnexA
5 SC-QAM 563000000 y 0x36 256QAM/AnnexA
6 SC-QAM 571000000 y 0x36 256QAM/AnnexA
7 SC-QAM 579000000 y 0x36 256QAM/AnnexA
8 SC-QAM 587000000 y 0x36 256QAM/AnnexA
9 SC-QAM 595000000 y 0x36 256QAM/AnnexA
10 SC-QAM 603000000 y 0x36 256QAM/AnnexA
11 SC-QAM 611000000 y 0x36 256QAM/AnnexA
12 SC-QAM 619000000 y 0x36 256QAM/AnnexA
13 SC-QAM 627000000 y 0x36 256QAM/AnnexA
14 SC-QAM 635000000 y 0x36 256QAM/AnnexA
15 SC-QAM 643000000 y 0x36 256QAM/AnnexA
16 SC-QAM 651000000 y 0x36 256QAM/AnnexA
17 SC-QAM 659000000 y 0x36 256QAM/AnnexA
18 SC-QAM 667000000 y 0x36 256QAM/AnnexA
19 SC-QAM 675000000 y 0x36 256QAM/AnnexA
20 SC-QAM 683000000 y 0x36 256QAM/AnnexA
21 SC-QAM 691000000 y 0x36 256QAM/AnnexA
22 SC-QAM 699000000 y 0x36 256QAM/AnnexA
23 SC-QAM 707000000 y 0x36 256QAM/AnnexA
24 SC-QAM 715000000 y 0x36 256QAM/AnnexA
25 SC-QAM 723000000 y 0x36 256QAM/AnnexA
26 SC-QAM 731000000 y 0x36 256QAM/AnnexA
27 SC-QAM 739000000 y 0x36 256QAM/AnnexA
28 SC-QAM 747000000 y 0x36 256QAM/AnnexA
29 SC-QAM 755000000 y 0x36 256QAM/AnnexA
30 SC-QAM 763000000 y 0x36 256QAM/AnnexA
31 SC-QAM 771000000 y 0x36 256QAM/AnnexA
32 SC-QAM 779000000 y 0x36 256QAM/AnnexA
159 OFDM PLC 897000000 n 0x36 25Khz/5us/0.625us
160 OFDM PLC 361000000 n 0x36 50Khz/0.9375us/0.625us

Trimmed Downstream Ambiguity Resolution Frequency List: list size = 3

531000000-sc_qam 539000000-sc_qam 547000000-sc_qam

visible dcid set = 7

freq with visible dcid set = 579000000

BcmCmDocsisCtlMsgACT::HandleEvent() @time=9396360 event_code=11


(kCmMdDsSgDiscDone)
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=true
[02:36:36 01/01/1970] [CmDocsisCtlThread]
BcmDocsisCmHalIf::SetPrimaryDownstreamChannel: (DOCSIS CableModem HalIf)
Installing primary downstream channel index: 0
SetRatios called with primary downstream channel number = 0
AnnexMode[0] = 1 QAM_Mode[0] = 256
Num/Den = 869/1280
3390 SCDMA/OFDM mode - ChannelNumber = 0 Numerator = 869 Denominator = 1280
CM/DocsisCtl> [02:36:36 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL failed to acquire sync or lost sync!
... TCOFDM - DTR is now locked.... (T2=150ms Sync=14)

Given a 216 MHz TCOFDM clock, the nominal value for the DTR FCW is 0xC22E45067
The DTR FCW is 0xc22e907b - that value is good (5, within 100 ppm)
Kicked off the DPLL
LE Done bit was set
LE Done bit was set
SCQAM DS clock source.
PLL in Leaky mode.
PLL Fn = 6, k1 = 18, k2 = 19
[02:36:36 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context=1 (ErrorRecovery)
[02:36:36 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context is error recovery or startup.
Always use last good upstream target chan id=1
[02:36:36 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper) Locked on the downstream. Waiting for UCDs...
[02:36:36 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefFail: (Cm
Multi US Helper) target hwTxId=0
CM/DocsisCtl> [02:36:38 01/01/1970] [CmDocsisCtlThread]
BcmCmMultiUsHelper::TmUcdRxTimerEvent: (Cm Multi US Helper)
ucd gathering ok.

[02:36:38 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper) state at
entry:

Channel targeting:
Downstream:
fTargetDsFreqHz = 0 (0)
fCurrentDsFreqHz = 0x2282d6c0 (579000000)
fStoredDsFreqHz = 0x29020c00 (688000000)

Upstream:
fDestSingleTxTargetUsChanId = 0x1 (1)
fTargetingContext = 1 (ErrorRecovery)

Startup UCD Selection Info:

low priority candidate ucid list = 1 4 3 2 8 5 6 7


happy home ucid set = 1 2 3 4

Upstream Active Channel Settings:

ucid rpt enable sel prio MAP source dcid's


---- ---------- -------- -----------------
1 0x1c0 0
2 0x1c0 0
3 0x1c0 0
4 0x1c0 0
5 0x1c0 0
6 0x1c0 0
7 0x1c0 0
8 0x1c0 0

BcmCmUsTargetMset (a.k.a. usable UCDs gathered during startup):

us config
phy change ranging scdma
type ucid dcid count tried? enabled?
---- ---- ---- ------ ------- --------
3 1 7 4 n n
3 2 7 4 n n
3 3 7 4 n n
3 4 7 4 n n
3 5 7 4 n n
3 6 7 4 n n
3 7 7 4 n n
3 8 7 4 n n

[02:36:38 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper)
starting docs3 upstream initialization on target ucid=1
with upstream phy type 3 on hardware transmitter index 0

[02:36:38 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::ExecuteTccCmd: hwTxId=0


docs ucid=0
[02:36:38 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0
[02:36:38 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::InstallUsSets: Installing
UCD w/ucid for UCID=1 for CM hardware tx chan 0

[02:36:38 01/01/1970] [CmDocsisCtlThread]


BcmCmUsSetsState::TestAndLaunchUsTimeSync: starting upstream time sync
acquisition...
[02:36:38 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefOk: (Cm
Multi US Helper) target hwTxId=0
[02:36:38 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::UsTimeRefOk: upstream time
sync acquired for fHwTxId=0

== Beginning initial ranging for Docsis UCID 1 ==


Minimum transmit power is 17 dBmV
Maximum transmit power is 53 dBmV
Stored power level for UCID 1 is 39 dBmV
Using per transmitter stored initial upstream power = 39 dBmV hwTxId = 0 docsis
UCID = 1
RNG-RSP UsChanId=1 Adj: tim=1912 freq=-7 Stat=Continue (CmdPwr (UsChanId-dBmV):
(1-40.75) )
[02:36:39 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0xc9
RNG-RSP UsChanId=1 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (1-
41.25) )
RNG-RSP UsChanId=1 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (1-
41.25) )
RNG-RSP UsChanId=1 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (1-
41.25) )
RNG-RSP UsChanId=1 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (1-
41.25) )
RNG-RSP UsChanId=1 Adj: tim=0 freq=0 Stat=Success (CmdPwr (UsChanId-dBmV): (1-
41.25) )
[02:36:45 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::FirstRngSuccess:
(CmDocsisCtlThread)
first RNG-RSP w/status==SUCCESS for hwTxId=0 and DOCSIS ucid=1
[02:36:45 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::LaunchEaeBpkm:
(CmDocsisCtlThread) BPKM enabled. starting Early Authentication and Encryption BPKM
key requests. Primary Sid = 201
CM/DocsisCtl> Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0

BcmCmUsChanTimerMuxACT::HandleEvent() @time=9594620 fTimerType=5


(kT4NoStationMaint) hwTxId=0 docs ucid=1
[02:39:54 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::T4NoStationMaintEvent: ERROR - no Station Maint map op error.
hwTxId=0 docs ucid=1
[02:39:54 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::CommonRngErrorHandler: reason=10 (T4NoStationMaintTimeout)
hwTxId=0 docs ucid=1
[02:39:54 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) Purging DS
frequency 579000000 from current scan pass due to pre-registration restart error
[02:39:54 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) reinit MAC #43:
T4NoStationMaintTimeout

[02:39:54 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::Reset:


(CmDocsisCtlThread) DefaultSnmpAgentClass::RestartPendingEvent for Vendor CM
Agent w/ BRCM Factory Support
Logging event: Received Response to Broadcast Maintenance Request, But no Unicast
Maintenance opportunities received - T4 time out;CM-MAC=fc:4a:e9:de:ad:88;CMTS-
MAC=28:52:61:fa:d8:78;CM-QOS=1.1;CM-VER=3.1;
Vendor CM Agent w/ BRCM Factory Support updating ifTableLastChange.
Vendor CM Agent w/ BRCM Factory Support resetting to default state.
Vendor CM Agent w/ BRCM Factory Support destroying users...
Vendor CM Agent w/ BRCM Factory Support destroying notifies...
Vendor CM Agent w/ BRCM Factory Support destroying views...
Allowing DOCS-CABLE-DEVICE-MIB IP filters.
Vendor CM Agent w/ BRCM Factory Support deferring traps.
CM/DocsisCtl> Received RG Event 0x80000001 State 0x1
eRouter Linux WAN Down
[02:39:54 01/01/1970] [eRouterMsgPipe] eRouterMsgPipe::UpdateIpNetToMediaEntry:
(eRouterMsgPipe) eRouter IP address:0.0.0.0
02:39:54.910 01/01/1970 (CALC) mtaCmStatusInfo() - MTA is Signaled: *NOT-
OPERATIONAL* (Stat=0x1) emtaCurState = 0.
EmtaSnmpAgent::SoftReset
Pausing trap thread
emta factory agentResetting to default state.
emta factory agent destroying users...
emta factory agent destroying notifies...
emta factory agent destroying views...
emta factory agent entering RFC-2576 Coexistence security mode.
emta factory agent entering Basic/Hybrid flow provisioning mode.
Resuming trap thread
Stopping DHCP/ToD/TFTP (client requested)...
[02:39:54 01/01/1970] [CmDocsisIpThread] BcmEcosIpHalIf::RemoveIpv6Address: (IP
Stack1 HalIf) ERROR - Failed to remove IPv6 address fe80::fe4a:e9ff:fede:ad88/64
from the stack!
[02:39:54 01/01/1970] [CmDocsisIpThread] BcmDhcpV6ClientIf::ReleaseAddresses:
(DHCPv6 ClientIf for IP Stack1) ERROR - IA state is initial; there is no address to
release.
BcmDocsis3DsMacEnableMulticastDsidForwarding 0; primary DS = 0
SCQAM DSID filter control = 0x00
OFDM DSID filter control = 0x01
CM/DocsisCtl> Deleting DOCSIS 1.0 CoS Settings for SID 0xc9
[02:39:55 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows:
(DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along
with associated Classifiers and PHS rules...
[02:39:55 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState:
(CmDocsisCtlThread)
[02:39:55 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Primary SID for usHwChannel 0 to 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 1
Updating US chan 8 data Profile test msg for Sid: 0x0.
Updating US chan 9 data Profile test msg for Sid: 0x0.
CM/DocsisCtl> [02:39:56 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL declared PULSE lost!
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=false
[02:39:56 01/01/1970] [CmDocsisCtlThread] BcmCmMultiDsHelper::PreRegDsChanChange:
target freq hz = 0
reason string = ErrorRecovery
CmInitReason = 16

Starting DS scanning...
[02:39:56 01/01/1970] [CmDocsisCtlThread] BcmCmDownstreamScan::StartScan: Starting
DS scan
Checking for cable cut...

CM/DocsisCtl> Plant power is 15.65

Cable connected

Scanning 580.000 MHz SC-QAM (Annex A(Eu.1M))


CM/DocsisCtl> Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 581.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 582.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 583.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 584.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 585.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 586.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 587.000 MHz SC-QAM (Annex A(Eu.1M)) locked SC-QAM
[02:39:59 01/01/1970] [CmDocsisCtlThread] BcmCmDsChan::DsLockOk: (BcmCmDsChan 0)
hwRxId=0 freq=0 dcid=0

******************************************
DOWNSTREAM STATUS
******************************************
HW Channel ID = 0
Phy type: SC-QAM
DS active chan settings:
ds chan id = 0
center freq, Hz = 587000000 Hz
primary capable = false
status event rpt bitmask = 0

CM HW Detected DS Phy Settings:


Center Freq, Hz = 587000000
QAM = Locked
FEC = Locked
Carrier Freq Offset, kHz = 0
Channel Width, Hz = 8000000
Modulation = Qam256
Interleaver = Taps12Incr17
Symbol Rate, sym/sec = 6952000

******************************************

[02:39:59 01/01/1970] [CmDocsisCtlThread]


BcmCmMacDomainSetsState::StartDsMacMddInit:
**********************************************
Waiting for MDDs...
**********************************************

BcmCmDocsisCtlMsgACT::HandleEvent() @time=9599840 event_code=4 (kCmPriDsMddSetsOk)

MDD diplexer band edge not specified.


MDD Plant US Frequency Range = extended.
Requested Spectrum = US:(0 MHz..85 MHz) DS:(0 MHz..0 MHz)
Best Match = 0: US:(5 MHz..85 MHz) DS:(108 MHz..1218 MHz)
Switchable diplexer ECN support disabled. NOT switching diplexer.
[02:39:59 01/01/1970] [CmDocsisCtlThread]
BcmCmMdDsSgDiscState::TrimSgSetWithoutThisDcid:
1 candidate MD-DS-SG remain after TrimSgSetWithoutThisDcid( target_dcid )
for target_dcid=0x08 (8)
[02:39:59 01/01/1970] [CmDocsisCtlThread] BcmCmMdDsSgDiscState::StartMdDsSgDisc:
special case: one and only one MD-DS-SG contains mdd_dcid.
fMdDsSgId=0x1d (29)
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , M-d++a+i-+Ty-eA+dA++e|:
i_L-ca+A++e|A: 1
Chec+ +D_A++e|A
Cha++e+ Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1

MD-DS-SG discovery info:

fCmMdDsSgDiscState = 6 (kMdDsSgDiscDone)
fMdDsSgId = 0x1d (29)
fMdDsSgDiscovered = true

Trimmed Candidate Downstream Service Group Settings List: list size = 1

sgid size member dcid's


---- ---- -------------
29 34 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
27 28 29 30 31 32 159 160

Downstream Active Channel Settings List:

dcid type frequency prim capable rpt enable mod/annex or PLC params
---- -------- --------- ------------ ---------- -----------------------
1 SC-QAM 531000000 y 0x36 256QAM/AnnexA
2 SC-QAM 539000000 y 0x36 256QAM/AnnexA
3 SC-QAM 547000000 y 0x36 256QAM/AnnexA
4 SC-QAM 555000000 y 0x36 256QAM/AnnexA
5 SC-QAM 563000000 y 0x36 256QAM/AnnexA
6 SC-QAM 571000000 y 0x36 256QAM/AnnexA
7 SC-QAM 579000000 y 0x36 256QAM/AnnexA
8 SC-QAM 587000000 y 0x36 256QAM/AnnexA
9 SC-QAM 595000000 y 0x36 256QAM/AnnexA
10 SC-QAM 603000000 y 0x36 256QAM/AnnexA
11 SC-QAM 611000000 y 0x36 256QAM/AnnexA
12 SC-QAM 619000000 y 0x36 256QAM/AnnexA
13 SC-QAM 627000000 y 0x36 256QAM/AnnexA
14 SC-QAM 635000000 y 0x36 256QAM/AnnexA
15 SC-QAM 643000000 y 0x36 256QAM/AnnexA
16 SC-QAM 651000000 y 0x36 256QAM/AnnexA
17 SC-QAM 659000000 y 0x36 256QAM/AnnexA
18 SC-QAM 667000000 y 0x36 256QAM/AnnexA
19 SC-QAM 675000000 y 0x36 256QAM/AnnexA
20 SC-QAM 683000000 y 0x36 256QAM/AnnexA
21 SC-QAM 691000000 y 0x36 256QAM/AnnexA
22 SC-QAM 699000000 y 0x36 256QAM/AnnexA
23 SC-QAM 707000000 y 0x36 256QAM/AnnexA
24 SC-QAM 715000000 y 0x36 256QAM/AnnexA
25 SC-QAM 723000000 y 0x36 256QAM/AnnexA
26 SC-QAM 731000000 y 0x36 256QAM/AnnexA
27 SC-QAM 739000000 y 0x36 256QAM/AnnexA
28 SC-QAM 747000000 y 0x36 256QAM/AnnexA
29 SC-QAM 755000000 y 0x36 256QAM/AnnexA
30 SC-QAM 763000000 y 0x36 256QAM/AnnexA
31 SC-QAM 771000000 y 0x36 256QAM/AnnexA
32 SC-QAM 779000000 y 0x36 256QAM/AnnexA
159 OFDM PLC 897000000 n 0x36 25Khz/5us/0.625us
160 OFDM PLC 361000000 n 0x36 50Khz/0.9375us/0.625us

Trimmed Downstream Ambiguity Resolution Frequency List: list size = 3

531000000-sc_qam 539000000-sc_qam 547000000-sc_qam

visible dcid set = 8

freq with visible dcid set = 587000000

BcmCmDocsisCtlMsgACT::HandleEvent() @time=9600430 event_code=11


(kCmMdDsSgDiscDone)
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=true
[02:40:00 01/01/1970] [CmDocsisCtlThread]
BcmDocsisCmHalIf::SetPrimaryDownstreamChannel: (DOCSIS CableModem HalIf)
Installing primary downstream channel index: 0
SetRatios called with primary downstream channel number = 0
AnnexMode[0] = 1 QAM_Mode[0] = 256
Num/Den = 869/1280
3390 SCDMA/OFDM mode - ChannelNumber = 0 Numerator = 869 Denominator = 1280
CM/DocsisCtl> [02:40:00 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL failed to acquire sync or lost sync!
... TCOFDM - DTR is now locked.... (T2=150ms Sync=14)

Given a 216 MHz TCOFDM clock, the nominal value for the DTR FCW is 0xC22E45067
The DTR FCW is 0xc22e966c - that value is good (6, within 100 ppm)
Kicked off the DPLL
LE Done bit was set
LE Done bit was set
SCQAM DS clock source.
PLL in Leaky mode.
PLL Fn = 6, k1 = 18, k2 = 19
[02:40:00 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context=1 (ErrorRecovery)
[02:40:00 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context is error recovery or startup.
Always use last good upstream target chan id=1
[02:40:00 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper) Locked on the downstream. Waiting for UCDs...
[02:40:00 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefFail: (Cm
Multi US Helper) target hwTxId=0
CM/DocsisCtl> [02:40:02 01/01/1970] [CmDocsisCtlThread]
BcmCmMultiUsHelper::TmUcdRxTimerEvent: (Cm Multi US Helper)
ucd gathering ok.

[02:40:02 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper) state at
entry:

Channel targeting:
Downstream:
fTargetDsFreqHz = 0 (0)
fCurrentDsFreqHz = 0x22fce8c0 (587000000)
fStoredDsFreqHz = 0x29020c00 (688000000)

Upstream:
fDestSingleTxTargetUsChanId = 0x1 (1)
fTargetingContext = 1 (ErrorRecovery)

Startup UCD Selection Info:

low priority candidate ucid list = 1 2 3 4 7 8 5 6


happy home ucid set = 1 2 3 4

Upstream Active Channel Settings:

ucid rpt enable sel prio MAP source dcid's


---- ---------- -------- -----------------
1 0x1c0 0
2 0x1c0 0
3 0x1c0 0
4 0x1c0 0
5 0x1c0 0
6 0x1c0 0
7 0x1c0 0
8 0x1c0 0

BcmCmUsTargetMset (a.k.a. usable UCDs gathered during startup):

us config
phy change ranging scdma
type ucid dcid count tried? enabled?
---- ---- ---- ------ ------- --------
3 1 8 4 n n
3 2 8 4 n n
3 3 8 4 n n
3 4 8 4 n n
3 5 8 4 n n
3 6 8 4 n n
3 7 8 4 n n
3 8 8 4 n n

[02:40:02 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper)
starting docs3 upstream initialization on target ucid=1
with upstream phy type 3 on hardware transmitter index 0
[02:40:02 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::ExecuteTccCmd: hwTxId=0
docs ucid=0
[02:40:02 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0
[02:40:02 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::InstallUsSets: Installing
UCD w/ucid for UCID=1 for CM hardware tx chan 0

[02:40:02 01/01/1970] [CmDocsisCtlThread]


BcmCmUsSetsState::TestAndLaunchUsTimeSync: starting upstream time sync
acquisition...
[02:40:03 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefOk: (Cm
Multi US Helper) target hwTxId=0
[02:40:03 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::UsTimeRefOk: upstream time
sync acquired for fHwTxId=0

== Beginning initial ranging for Docsis UCID 1 ==


Minimum transmit power is 17 dBmV
Maximum transmit power is 53 dBmV
Stored power level for UCID 1 is 39 dBmV
Using per transmitter stored initial upstream power = 39 dBmV hwTxId = 0 docsis
UCID = 1
RNG-RSP UsChanId=1 Adj: tim=1955 freq=26 Stat=Continue (CmdPwr (UsChanId-dBmV):
(1-41.25) )
[02:40:03 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0xc9
RNG-RSP UsChanId=1 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (1-
41.25) )
RNG-RSP UsChanId=1 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (1-
41.25) )
RNG-RSP UsChanId=1 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (1-
41.25) )
RNG-RSP UsChanId=1 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (1-
41.25) )
RNG-RSP UsChanId=1 Adj: tim=0 freq=0 Stat=Success (CmdPwr (UsChanId-dBmV): (1-
41.25) )
[02:40:08 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::FirstRngSuccess:
(CmDocsisCtlThread)
first RNG-RSP w/status==SUCCESS for hwTxId=0 and DOCSIS ucid=1
[02:40:08 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::LaunchEaeBpkm:
(CmDocsisCtlThread) BPKM enabled. starting Early Authentication and Encryption BPKM
key requests. Primary Sid = 201
CM/DocsisCtl> Bandwidth request failure! Status = 0

BcmCmUsChanTimerMuxACT::HandleEvent() @time=9798400 fTimerType=5


(kT4NoStationMaint) hwTxId=0 docs ucid=1
[02:43:18 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::T4NoStationMaintEvent: ERROR - no Station Maint map op error.
hwTxId=0 docs ucid=1
[02:43:18 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::CommonRngErrorHandler: reason=10 (T4NoStationMaintTimeout)
hwTxId=0 docs ucid=1
[02:43:18 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) Purging DS
frequency 587000000 from current scan pass due to pre-registration restart error
[02:43:18 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) reinit MAC #44:
T4NoStationMaintTimeout
[02:43:18 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::Reset:
(CmDocsisCtlThread) DefaultSnmpAgentClass::RestartPendingEvent for Vendor CM
Agent w/ BRCM Factory Support
Logging event: Received Response to Broadcast Maintenance Request, But no Unicast
Maintenance opportunities received - T4 time out;CM-MAC=fc:4a:e9:de:ad:88;CMTS-
MAC=28:52:61:fa:d8:78;CM-QOS=1.1;CM-VER=3.1;
Vendor CM Agent w/ BRCM Factory Support updating ifTableLastChange.
Vendor CM Agent w/ BRCM Factory Support resetting to default state.
Vendor CM Agent w/ BRCM Factory Support destroying users...
Vendor CM Agent w/ BRCM Factory Support destroying notifies...
Vendor CM Agent w/ BRCM Factory Support destroying views...
Allowing DOCS-CABLE-DEVICE-MIB IP filters.
Vendor CM Agent w/ BRCM Factory Support deferring traps.
CM/DocsisCtl> Received RG Event 0x80000001 State 0x1
eRouter Linux WAN Down
[02:43:18 01/01/1970] [eRouterMsgPipe] eRouterMsgPipe::UpdateIpNetToMediaEntry:
(eRouterMsgPipe) eRouter IP address:0.0.0.0
02:43:18.690 01/01/1970 (CALC) mtaCmStatusInfo() - MTA is Signaled: *NOT-
OPERATIONAL* (Stat=0x1) emtaCurState = 0.
EmtaSnmpAgent::SoftReset
Pausing trap thread
emta factory agentResetting to default state.
emta factory agent destroying users...
emta factory agent destroying notifies...
emta factory agent destroying views...
emta factory agent entering RFC-2576 Coexistence security mode.
emta factory agent entering Basic/Hybrid flow provisioning mode.
Resuming trap thread
Stopping DHCP/ToD/TFTP (client requested)...
[02:43:18 01/01/1970] [CmDocsisIpThread] BcmEcosIpHalIf::RemoveIpv6Address: (IP
Stack1 HalIf) ERROR - Failed to remove IPv6 address fe80::fe4a:e9ff:fede:ad88/64
from the stack!
[02:43:18 01/01/1970] [CmDocsisIpThread] BcmDhcpV6ClientIf::ReleaseAddresses:
(DHCPv6 ClientIf for IP Stack1) ERROR - IA state is initial; there is no address to
release.
BcmDocsis3DsMacEnableMulticastDsidForwarding 0; primary DS = 0
SCQAM DSID filter control = 0x00
OFDM DSID filter control = 0x01
CM/DocsisCtl> Deleting DOCSIS 1.0 CoS Settings for SID 0xc9
[02:43:19 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows:
(DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along
with associated Classifiers and PHS rules...
[02:43:19 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState:
(CmDocsisCtlThread)
[02:43:19 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Primary SID for usHwChannel 0 to 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 1
Updating US chan 8 data Profile test msg for Sid: 0x0.
Updating US chan 9 data Profile test msg for Sid: 0x0.
CM/DocsisCtl> [02:43:19 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL declared PULSE lost!
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=false
[02:43:19 01/01/1970] [CmDocsisCtlThread] BcmCmMultiDsHelper::PreRegDsChanChange:
target freq hz = 0
reason string = ErrorRecovery
CmInitReason = 16
Starting DS scanning...
[02:43:19 01/01/1970] [CmDocsisCtlThread] BcmCmDownstreamScan::StartScan: Starting
DS scan
Checking for cable cut...

CM/DocsisCtl> Plant power is 15.65

Cable connected

Scanning 588.000 MHz SC-QAM (Annex A(Eu.1M))


CM/DocsisCtl> Scanning 589.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 590.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 591.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 592.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 593.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 594.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 595.000 MHz SC-QAM (Annex A(Eu.1M)) locked SC-QAM
[02:43:22 01/01/1970] [CmDocsisCtlThread] BcmCmDsChan::DsLockOk: (BcmCmDsChan 0)
hwRxId=0 freq=0 dcid=0

******************************************
DOWNSTREAM STATUS
******************************************
HW Channel ID = 0
Phy type: SC-QAM
DS active chan settings:
ds chan id = 0
center freq, Hz = 595000000 Hz
primary capable = false
status event rpt bitmask = 0

CM HW Detected DS Phy Settings:


Center Freq, Hz = 595000000
QAM = Locked
FEC = Locked
Carrier Freq Offset, kHz = 0
Channel Width, Hz = 8000000
Modulation = Qam256
Interleaver = Taps12Incr17
Symbol Rate, sym/sec = 6952000

******************************************

[02:43:22 01/01/1970] [CmDocsisCtlThread]


BcmCmMacDomainSetsState::StartDsMacMddInit:
**********************************************
Waiting for MDDs...
**********************************************

CM/DocsisCtl>
BcmCmDocsisCtlMsgACT::HandleEvent() @time=9803760 event_code=4 (kCmPriDsMddSetsOk)

MDD diplexer band edge not specified.


MDD Plant US Frequency Range = extended.
Requested Spectrum = US:(0 MHz..85 MHz) DS:(0 MHz..0 MHz)
Best Match = 0: US:(5 MHz..85 MHz) DS:(108 MHz..1218 MHz)
Switchable diplexer ECN support disabled. NOT switching diplexer.
[02:43:23 01/01/1970] [CmDocsisCtlThread]
BcmCmMdDsSgDiscState::TrimSgSetWithoutThisDcid:
1 candidate MD-DS-SG remain after TrimSgSetWithoutThisDcid( target_dcid )
for target_dcid=0x09 (9)
[02:43:23 01/01/1970] [CmDocsisCtlThread] BcmCmMdDsSgDiscState::StartMdDsSgDisc:
special case: one and only one MD-DS-SG contains mdd_dcid.
fMdDsSgId=0x1d (29)
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , M-d++a+i-+Ty-eA+dA++e|:
i_L-ca+A++e|A: 1
Chec+ +D_A++e|A
Cha++e+ Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1

MD-DS-SG discovery info:

fCmMdDsSgDiscState = 6 (kMdDsSgDiscDone)
fMdDsSgId = 0x1d (29)
fMdDsSgDiscovered = true
Trimmed Candidate Downstream Service Group Settings List: list size = 1

sgid size member dcid's


---- ---- -------------
29 34 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
27 28 29 30 31 32 159 160

Downstream Active Channel Settings List:

dcid type frequency prim capable rpt enable mod/annex or PLC params
---- -------- --------- ------------ ---------- -----------------------
1 SC-QAM 531000000 y 0x36 256QAM/AnnexA
2 SC-QAM 539000000 y 0x36 256QAM/AnnexA
3 SC-QAM 547000000 y 0x36 256QAM/AnnexA
4 SC-QAM 555000000 y 0x36 256QAM/AnnexA
5 SC-QAM 563000000 y 0x36 256QAM/AnnexA
6 SC-QAM 571000000 y 0x36 256QAM/AnnexA
7 SC-QAM 579000000 y 0x36 256QAM/AnnexA
8 SC-QAM 587000000 y 0x36 256QAM/AnnexA
9 SC-QAM 595000000 y 0x36 256QAM/AnnexA
10 SC-QAM 603000000 y 0x36 256QAM/AnnexA
11 SC-QAM 611000000 y 0x36 256QAM/AnnexA
12 SC-QAM 619000000 y 0x36 256QAM/AnnexA
13 SC-QAM 627000000 y 0x36 256QAM/AnnexA
14 SC-QAM 635000000 y 0x36 256QAM/AnnexA
15 SC-QAM 643000000 y 0x36 256QAM/AnnexA
16 SC-QAM 651000000 y 0x36 256QAM/AnnexA
17 SC-QAM 659000000 y 0x36 256QAM/AnnexA
18 SC-QAM 667000000 y 0x36 256QAM/AnnexA
19 SC-QAM 675000000 y 0x36 256QAM/AnnexA
20 SC-QAM 683000000 y 0x36 256QAM/AnnexA
21 SC-QAM 691000000 y 0x36 256QAM/AnnexA
22 SC-QAM 699000000 y 0x36 256QAM/AnnexA
23 SC-QAM 707000000 y 0x36 256QAM/AnnexA
24 SC-QAM 715000000 y 0x36 256QAM/AnnexA
25 SC-QAM 723000000 y 0x36 256QAM/AnnexA
26 SC-QAM 731000000 y 0x36 256QAM/AnnexA
27 SC-QAM 739000000 y 0x36 256QAM/AnnexA
28 SC-QAM 747000000 y 0x36 256QAM/AnnexA
29 SC-QAM 755000000 y 0x36 256QAM/AnnexA
30 SC-QAM 763000000 y 0x36 256QAM/AnnexA
31 SC-QAM 771000000 y 0x36 256QAM/AnnexA
32 SC-QAM 779000000 y 0x36 256QAM/AnnexA
159 OFDM PLC 897000000 n 0x36 25Khz/5us/0.625us
160 OFDM PLC 361000000 n 0x36 50Khz/0.9375us/0.625us

Trimmed Downstream Ambiguity Resolution Frequency List: list size = 3

531000000-sc_qam 539000000-sc_qam 547000000-sc_qam

visible dcid set = 9

freq with visible dcid set = 595000000

BcmCmDocsisCtlMsgACT::HandleEvent() @time=9804360 event_code=11


(kCmMdDsSgDiscDone)
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=true
[02:43:24 01/01/1970] [CmDocsisCtlThread]
BcmDocsisCmHalIf::SetPrimaryDownstreamChannel: (DOCSIS CableModem HalIf)
Installing primary downstream channel index: 0
SetRatios called with primary downstream channel number = 0
AnnexMode[0] = 1 QAM_Mode[0] = 256
Num/Den = 869/1280
3390 SCDMA/OFDM mode - ChannelNumber = 0 Numerator = 869 Denominator = 1280
CM/DocsisCtl> [02:43:24 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL failed to acquire sync or lost sync!
... TCOFDM - DTR is now locked.... (T2=150ms Sync=14)

Given a 216 MHz TCOFDM clock, the nominal value for the DTR FCW is 0xC22E45067
The DTR FCW is 0xc22e9706 - that value is good (6, within 100 ppm)
Kicked off the DPLL
LE Done bit was set
LE Done bit was set
SCQAM DS clock source.
PLL in Leaky mode.
PLL Fn = 6, k1 = 18, k2 = 19
[02:43:24 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context=1 (ErrorRecovery)
[02:43:24 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context is error recovery or startup.
Always use last good upstream target chan id=1
[02:43:24 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper) Locked on the downstream. Waiting for UCDs...
[02:43:24 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefFail: (Cm
Multi US Helper) target hwTxId=0
CM/DocsisCtl> [02:43:26 01/01/1970] [CmDocsisCtlThread]
BcmCmMultiUsHelper::TmUcdRxTimerEvent: (Cm Multi US Helper)
ucd gathering ok.

[02:43:26 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper) state at
entry:

Channel targeting:
Downstream:
fTargetDsFreqHz = 0 (0)
fCurrentDsFreqHz = 0x2376fac0 (595000000)
fStoredDsFreqHz = 0x29020c00 (688000000)

Upstream:
fDestSingleTxTargetUsChanId = 0x1 (1)
fTargetingContext = 1 (ErrorRecovery)

Startup UCD Selection Info:

low priority candidate ucid list = 1 3 4 2 5 7 6 8


happy home ucid set = 1 2 3 4

Upstream Active Channel Settings:


ucid rpt enable sel prio MAP source dcid's
---- ---------- -------- -----------------
1 0x1c0 0
2 0x1c0 0
3 0x1c0 0
4 0x1c0 0
5 0x1c0 0
6 0x1c0 0
7 0x1c0 0
8 0x1c0 0

BcmCmUsTargetMset (a.k.a. usable UCDs gathered during startup):

us config
phy change ranging scdma
type ucid dcid count tried? enabled?
---- ---- ---- ------ ------- --------
3 1 9 4 n n
3 2 9 4 n n
3 3 9 4 n n
3 4 9 4 n n
3 5 9 4 n n
3 6 9 4 n n
3 7 9 4 n n
3 8 9 4 n n

[02:43:26 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper)
starting docs3 upstream initialization on target ucid=1
with upstream phy type 3 on hardware transmitter index 0

[02:43:26 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::ExecuteTccCmd: hwTxId=0


docs ucid=0
[02:43:26 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0
[02:43:26 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::InstallUsSets: Installing
UCD w/ucid for UCID=1 for CM hardware tx chan 0

[02:43:26 01/01/1970] [CmDocsisCtlThread]


BcmCmUsSetsState::TestAndLaunchUsTimeSync: starting upstream time sync
acquisition...
[02:43:26 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefOk: (Cm
Multi US Helper) target hwTxId=0
[02:43:26 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::UsTimeRefOk: upstream time
sync acquired for fHwTxId=0

== Beginning initial ranging for Docsis UCID 1 ==


Minimum transmit power is 17 dBmV
Maximum transmit power is 53 dBmV
Stored power level for UCID 1 is 39 dBmV
Using per transmitter stored initial upstream power = 39 dBmV hwTxId = 0 docsis
UCID = 1
RNG-RSP UsChanId=1 Adj: tim=1883 freq=-26 Stat=Continue (CmdPwr (UsChanId-dBmV):
(1-41.25) )
[02:43:27 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0xc9
RNG-RSP UsChanId=1 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (1-
41.25) )
RNG-RSP UsChanId=1 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (1-
41.25) )
RNG-RSP UsChanId=1 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (1-
41.25) )
RNG-RSP UsChanId=1 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (1-
41.25) )
RNG-RSP UsChanId=1 Adj: tim=0 freq=0 Stat=Success (CmdPwr (UsChanId-dBmV): (1-
41.25) )
[02:43:32 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::FirstRngSuccess:
(CmDocsisCtlThread)
first RNG-RSP w/status==SUCCESS for hwTxId=0 and DOCSIS ucid=1
[02:43:32 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::LaunchEaeBpkm:
(CmDocsisCtlThread) BPKM enabled. starting Early Authentication and Encryption BPKM
key requests. Primary Sid = 201
CM/DocsisCtl> Bandwidth request failure! Status = 0

BcmCmUsChanTimerMuxACT::HandleEvent() @time=10001920 fTimerType=5


(kT4NoStationMaint) hwTxId=0 docs ucid=1
[02:46:41 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::T4NoStationMaintEvent: ERROR - no Station Maint map op error.
hwTxId=0 docs ucid=1
[02:46:41 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::CommonRngErrorHandler: reason=10 (T4NoStationMaintTimeout)
hwTxId=0 docs ucid=1
[02:46:41 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) Purging DS
frequency 595000000 from current scan pass due to pre-registration restart error
[02:46:41 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) reinit MAC #45:
T4NoStationMaintTimeout

[02:46:41 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::Reset:


(CmDocsisCtlThread) DefaultSnmpAgentClass::RestartPendingEvent for Vendor CM
Agent w/ BRCM Factory Support
Logging event: Received Response to Broadcast Maintenance Request, But no Unicast
Maintenance opportunities received - T4 time out;CM-MAC=fc:4a:e9:de:ad:88;CMTS-
MAC=28:52:61:fa:d8:78;CM-QOS=1.1;CM-VER=3.1;
Vendor CM Agent w/ BRCM Factory Support updating ifTableLastChange.
Vendor CM Agent w/ BRCM Factory Support resetting to default state.
Vendor CM Agent w/ BRCM Factory Support destroying users...
Vendor CM Agent w/ BRCM Factory Support destroying notifies...
Vendor CM Agent w/ BRCM Factory Support destroying views...
Allowing DOCS-CABLE-DEVICE-MIB IP filters.
Vendor CM Agent w/ BRCM Factory Support deferring traps.
CM/DocsisCtl> Received RG Event 0x80000001 State 0x1
eRouter Linux WAN Down
[02:46:42 01/01/1970] [eRouterMsgPipe] eRouterMsgPipe::UpdateIpNetToMediaEntry:
(eRouterMsgPipe) eRouter IP address:0.0.0.0
02:46:42.210 01/01/1970 (CALC) mtaCmStatusInfo() - MTA is Signaled: *NOT-
OPERATIONAL* (Stat=0x1) emtaCurState = 0.
EmtaSnmpAgent::SoftReset
Pausing trap thread
emta factory agentResetting to default state.
emta factory agent destroying users...
emta factory agent destroying notifies...
emta factory agent destroying views...
emta factory agent entering RFC-2576 Coexistence security mode.
emta factory agent entering Basic/Hybrid flow provisioning mode.
Resuming trap thread
Stopping DHCP/ToD/TFTP (client requested)...
[02:46:42 01/01/1970] [CmDocsisIpThread] BcmEcosIpHalIf::RemoveIpv6Address: (IP
Stack1 HalIf) ERROR - Failed to remove IPv6 address fe80::fe4a:e9ff:fede:ad88/64
from the stack!
[02:46:42 01/01/1970] [CmDocsisIpThread] BcmDhcpV6ClientIf::ReleaseAddresses:
(DHCPv6 ClientIf for IP Stack1) ERROR - IA state is initial; there is no address to
release.
BcmDocsis3DsMacEnableMulticastDsidForwarding 0; primary DS = 0
SCQAM DSID filter control = 0x00
OFDM DSID filter control = 0x01
Deleting DOCSIS 1.0 CoS Settings for SID 0xc9
[02:46:42 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows:
(DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along
with associated Classifiers and PHS rules...
[02:46:42 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState:
(CmDocsisCtlThread)
[02:46:42 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Primary SID for usHwChannel 0 to 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 1
Updating US chan 8 data Profile test msg for Sid: 0x0.
Updating US chan 9 data Profile test msg for Sid: 0x0.
CM/DocsisCtl> [02:46:43 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL declared PULSE lost!
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=false
[02:46:43 01/01/1970] [CmDocsisCtlThread] BcmCmMultiDsHelper::PreRegDsChanChange:
target freq hz = 0
reason string = ErrorRecovery
CmInitReason = 16

Starting DS scanning...
[02:46:43 01/01/1970] [CmDocsisCtlThread] BcmCmDownstreamScan::StartScan: Starting
DS scan
Checking for cable cut...

CM/DocsisCtl> Plant power is 15.65

Cable connected

CM/DocsisCtl> Scanning 596.000 MHz SC-QAM (Annex A(Eu.1M))


Scanning 597.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 598.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 599.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 600.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 601.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 602.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 603.000 MHz SC-QAM (Annex A(Eu.1M)) locked SC-QAM
[02:46:46 01/01/1970] [CmDocsisCtlThread] BcmCmDsChan::DsLockOk: (BcmCmDsChan 0)
hwRxId=0 freq=0 dcid=0

******************************************
DOWNSTREAM STATUS
******************************************
HW Channel ID = 0
Phy type: SC-QAM
DS active chan settings:
ds chan id = 0
center freq, Hz = 603000000 Hz
primary capable = false
status event rpt bitmask = 0

CM HW Detected DS Phy Settings:


Center Freq, Hz = 603000000
QAM = Locked
FEC = Locked
Carrier Freq Offset, kHz = 0
Channel Width, Hz = 8000000
Modulation = Qam256
Interleaver = Taps12Incr17
Symbol Rate, sym/sec = 6952000

******************************************

[02:46:46 01/01/1970] [CmDocsisCtlThread]


BcmCmMacDomainSetsState::StartDsMacMddInit:
**********************************************
Waiting for MDDs...
**********************************************

CM/DocsisCtl>
BcmCmDocsisCtlMsgACT::HandleEvent() @time=10007760 event_code=4
(kCmPriDsMddSetsOk)
MDD diplexer band edge not specified.
MDD Plant US Frequency Range = extended.
Requested Spectrum = US:(0 MHz..85 MHz) DS:(0 MHz..0 MHz)
Best Match = 0: US:(5 MHz..85 MHz) DS:(108 MHz..1218 MHz)
Switchable diplexer ECN support disabled. NOT switching diplexer.
[02:46:47 01/01/1970] [CmDocsisCtlThread]
BcmCmMdDsSgDiscState::TrimSgSetWithoutThisDcid:
1 candidate MD-DS-SG remain after TrimSgSetWithoutThisDcid( target_dcid )
for target_dcid=0x0a (10)
[02:46:47 01/01/1970] [CmDocsisCtlThread] BcmCmMdDsSgDiscState::StartMdDsSgDisc:
special case: one and only one MD-DS-SG contains mdd_dcid.
fMdDsSgId=0x1d (29)
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , M-d++a+i-+Ty-eA+dA++e|:
i_L-ca+A++e|A: 1
Chec+ +D_A++e|A
Cha++e+ Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1

MD-DS-SG discovery info:

fCmMdDsSgDiscState = 6 (kMdDsSgDiscDone)
fMdDsSgId = 0x1d (29)
fMdDsSgDiscovered = true

Trimmed Candidate Downstream Service Group Settings List: list size = 1

sgid size member dcid's


---- ---- -------------
29 34 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
27 28 29 30 31 32 159 160

Downstream Active Channel Settings List:

dcid type frequency prim capable rpt enable mod/annex or PLC params
---- -------- --------- ------------ ---------- -----------------------
1 SC-QAM 531000000 y 0x36 256QAM/AnnexA
2 SC-QAM 539000000 y 0x36 256QAM/AnnexA
3 SC-QAM 547000000 y 0x36 256QAM/AnnexA
4 SC-QAM 555000000 y 0x36 256QAM/AnnexA
5 SC-QAM 563000000 y 0x36 256QAM/AnnexA
6 SC-QAM 571000000 y 0x36 256QAM/AnnexA
7 SC-QAM 579000000 y 0x36 256QAM/AnnexA
8 SC-QAM 587000000 y 0x36 256QAM/AnnexA
9 SC-QAM 595000000 y 0x36 256QAM/AnnexA
10 SC-QAM 603000000 y 0x36 256QAM/AnnexA
11 SC-QAM 611000000 y 0x36 256QAM/AnnexA
12 SC-QAM 619000000 y 0x36 256QAM/AnnexA
13 SC-QAM 627000000 y 0x36 256QAM/AnnexA
14 SC-QAM 635000000 y 0x36 256QAM/AnnexA
15 SC-QAM 643000000 y 0x36 256QAM/AnnexA
16 SC-QAM 651000000 y 0x36 256QAM/AnnexA
17 SC-QAM 659000000 y 0x36 256QAM/AnnexA
18 SC-QAM 667000000 y 0x36 256QAM/AnnexA
19 SC-QAM 675000000 y 0x36 256QAM/AnnexA
20 SC-QAM 683000000 y 0x36 256QAM/AnnexA
21 SC-QAM 691000000 y 0x36 256QAM/AnnexA
22 SC-QAM 699000000 y 0x36 256QAM/AnnexA
23 SC-QAM 707000000 y 0x36 256QAM/AnnexA
24 SC-QAM 715000000 y 0x36 256QAM/AnnexA
25 SC-QAM 723000000 y 0x36 256QAM/AnnexA
26 SC-QAM 731000000 y 0x36 256QAM/AnnexA
27 SC-QAM 739000000 y 0x36 256QAM/AnnexA
28 SC-QAM 747000000 y 0x36 256QAM/AnnexA
29 SC-QAM 755000000 y 0x36 256QAM/AnnexA
30 SC-QAM 763000000 y 0x36 256QAM/AnnexA
31 SC-QAM 771000000 y 0x36 256QAM/AnnexA
32 SC-QAM 779000000 y 0x36 256QAM/AnnexA
159 OFDM PLC 897000000 n 0x36 25Khz/5us/0.625us
160 OFDM PLC 361000000 n 0x36 50Khz/0.9375us/0.625us

Trimmed Downstream Ambiguity Resolution Frequency List: list size = 3

531000000-sc_qam 539000000-sc_qam 547000000-sc_qam

visible dcid set = 10

freq with visible dcid set = 603000000

BcmCmDocsisCtlMsgACT::HandleEvent() @time=10008360 event_code=11


(kCmMdDsSgDiscDone)
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=true
[02:46:48 01/01/1970] [CmDocsisCtlThread]
BcmDocsisCmHalIf::SetPrimaryDownstreamChannel: (DOCSIS CableModem HalIf)
Installing primary downstream channel index: 0
SetRatios called with primary downstream channel number = 0
AnnexMode[0] = 1 QAM_Mode[0] = 256
Num/Den = 869/1280
3390 SCDMA/OFDM mode - ChannelNumber = 0 Numerator = 869 Denominator = 1280
CM/DocsisCtl> [02:46:48 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL failed to acquire sync or lost sync!
... TCOFDM - DTR is now locked.... (T2=150ms Sync=14)

Given a 216 MHz TCOFDM clock, the nominal value for the DTR FCW is 0xC22E45067
The DTR FCW is 0xc22e8d63 - that value is good (5, within 100 ppm)
Kicked off the DPLL
LE Done bit was set
LE Done bit was set
SCQAM DS clock source.
PLL in Leaky mode.
PLL Fn = 6, k1 = 18, k2 = 19
[02:46:48 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context=1 (ErrorRecovery)
[02:46:48 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context is error recovery or startup.
Always use last good upstream target chan id=1
[02:46:48 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper) Locked on the downstream. Waiting for UCDs...
[02:46:48 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefFail: (Cm
Multi US Helper) target hwTxId=0
CM/DocsisCtl> [02:46:50 01/01/1970] [CmDocsisCtlThread]
BcmCmMultiUsHelper::TmUcdRxTimerEvent: (Cm Multi US Helper)
ucd gathering ok.

[02:46:50 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper) state at
entry:

Channel targeting:
Downstream:
fTargetDsFreqHz = 0 (0)
fCurrentDsFreqHz = 0x23f10cc0 (603000000)
fStoredDsFreqHz = 0x29020c00 (688000000)

Upstream:
fDestSingleTxTargetUsChanId = 0x1 (1)
fTargetingContext = 1 (ErrorRecovery)

Startup UCD Selection Info:

low priority candidate ucid list = 3 1 2 4 8 6 7 5


happy home ucid set = 1 2 3 4

Upstream Active Channel Settings:

ucid rpt enable sel prio MAP source dcid's


---- ---------- -------- -----------------
1 0x1c0 0
2 0x1c0 0
3 0x1c0 0
4 0x1c0 0
5 0x1c0 0
6 0x1c0 0
7 0x1c0 0
8 0x1c0 0

BcmCmUsTargetMset (a.k.a. usable UCDs gathered during startup):

us config
phy change ranging scdma
type ucid dcid count tried? enabled?
---- ---- ---- ------ ------- --------
3 1 10 4 n n
3 2 10 4 n n
3 3 10 4 n n
3 4 10 4 n n
3 5 10 4 n n
3 6 10 4 n n
3 7 10 4 n n
3 8 10 4 n n
[02:46:50 01/01/1970] [CmDocsisCtlThread]
BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper)
starting docs3 upstream initialization on target ucid=3
with upstream phy type 3 on hardware transmitter index 0

[02:46:50 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::ExecuteTccCmd: hwTxId=0


docs ucid=0
[02:46:50 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0
[02:46:50 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::InstallUsSets: Installing
UCD w/ucid for UCID=3 for CM hardware tx chan 0

[02:46:50 01/01/1970] [CmDocsisCtlThread]


BcmCmUsSetsState::TestAndLaunchUsTimeSync: starting upstream time sync
acquisition...
[02:46:50 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefOk: (Cm
Multi US Helper) target hwTxId=0
[02:46:50 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::UsTimeRefOk: upstream time
sync acquired for fHwTxId=0

== Beginning initial ranging for Docsis UCID 3 ==


Minimum transmit power is 17 dBmV
Maximum transmit power is 53 dBmV
Stored power level for UCID 3 is 38 dBmV
Using per transmitter stored initial upstream power = 38 dBmV hwTxId = 0 docsis
UCID = 3
RNG-RSP UsChanId=3 Adj: tim=1857 freq=56 Stat=Continue (CmdPwr (UsChanId-dBmV):
(3-40.75) )
[02:46:51 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0xc9
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (3-
41.25) )
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (3-
41.25) )
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (3-
41.25) )
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (3-
41.25) )
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Success (CmdPwr (UsChanId-dBmV): (3-
41.25) )
[02:46:56 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::FirstRngSuccess:
(CmDocsisCtlThread)
first RNG-RSP w/status==SUCCESS for hwTxId=0 and DOCSIS ucid=3
[02:46:56 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::LaunchEaeBpkm:
(CmDocsisCtlThread) BPKM enabled. starting Early Authentication and Encryption BPKM
key requests. Primary Sid = 201
CM/DocsisCtl> Bandwidth request failure! Status = 0

BcmCmUsChanTimerMuxACT::HandleEvent() @time=10206220 fTimerType=5


(kT4NoStationMaint) hwTxId=0 docs ucid=3
[02:50:06 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::T4NoStationMaintEvent: ERROR - no Station Maint map op error.
hwTxId=0 docs ucid=3
[02:50:06 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::CommonRngErrorHandler: reason=10 (T4NoStationMaintTimeout)
hwTxId=0 docs ucid=3
[02:50:06 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) Purging DS
frequency 603000000 from current scan pass due to pre-registration restart error
[02:50:06 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) reinit MAC #46:
T4NoStationMaintTimeout

[02:50:06 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::Reset:


(CmDocsisCtlThread) DefaultSnmpAgentClass::RestartPendingEvent for Vendor CM
Agent w/ BRCM Factory Support
Logging event: Received Response to Broadcast Maintenance Request, But no Unicast
Maintenance opportunities received - T4 time out;CM-MAC=fc:4a:e9:de:ad:88;CMTS-
MAC=28:52:61:fa:d8:78;CM-QOS=1.1;CM-VER=3.1;
Vendor CM Agent w/ BRCM Factory Support updating ifTableLastChange.
Vendor CM Agent w/ BRCM Factory Support resetting to default state.
Vendor CM Agent w/ BRCM Factory Support destroying users...
Vendor CM Agent w/ BRCM Factory Support destroying notifies...
Vendor CM Agent w/ BRCM Factory Support destroying views...
Allowing DOCS-CABLE-DEVICE-MIB IP filters.
Vendor CM Agent w/ BRCM Factory Support deferring traps.
CM/DocsisCtl> Received RG Event 0x80000001 State 0x1
eRouter Linux WAN Down
[02:50:06 01/01/1970] [eRouterMsgPipe] eRouterMsgPipe::UpdateIpNetToMediaEntry:
(eRouterMsgPipe) eRouter IP address:0.0.0.0
02:50:06.510 01/01/1970 (CALC) mtaCmStatusInfo() - MTA is Signaled: *NOT-
OPERATIONAL* (Stat=0x1) emtaCurState = 0.
EmtaSnmpAgent::SoftReset
Pausing trap thread
emta factory agentResetting to default state.
emta factory agent destroying users...
emta factory agent destroying notifies...
emta factory agent destroying views...
emta factory agent entering RFC-2576 Coexistence security mode.
emta factory agent entering Basic/Hybrid flow provisioning mode.
Resuming trap thread
Stopping DHCP/ToD/TFTP (client requested)...
[02:50:06 01/01/1970] [CmDocsisIpThread] BcmEcosIpHalIf::RemoveIpv6Address: (IP
Stack1 HalIf) ERROR - Failed to remove IPv6 address fe80::fe4a:e9ff:fede:ad88/64
from the stack!
[02:50:06 01/01/1970] [CmDocsisIpThread] BcmDhcpV6ClientIf::ReleaseAddresses:
(DHCPv6 ClientIf for IP Stack1) ERROR - IA state is initial; there is no address to
release.
BcmDocsis3DsMacEnableMulticastDsidForwarding 0; primary DS = 0
SCQAM DSID filter control = 0x00
OFDM DSID filter control = 0x01
CM/DocsisCtl> Deleting DOCSIS 1.0 CoS Settings for SID 0xc9
[02:50:06 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows:
(DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along
with associated Classifiers and PHS rules...
[02:50:06 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState:
(CmDocsisCtlThread)
[02:50:06 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Primary SID for usHwChannel 0 to 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 1
Updating US chan 8 data Profile test msg for Sid: 0x0.
Updating US chan 9 data Profile test msg for Sid: 0x0.
CM/DocsisCtl> [02:50:07 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL declared PULSE lost!
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=false
[02:50:07 01/01/1970] [CmDocsisCtlThread] BcmCmMultiDsHelper::PreRegDsChanChange:
target freq hz = 0
reason string = ErrorRecovery
CmInitReason = 16

Starting DS scanning...
[02:50:07 01/01/1970] [CmDocsisCtlThread] BcmCmDownstreamScan::StartScan: Starting
DS scan
Checking for cable cut...

CM/DocsisCtl> Plant power is 15.65

Cable connected

Scanning 604.000 MHz SC-QAM (Annex A(Eu.1M))


CM/DocsisCtl> Scanning 605.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 606.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 607.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 608.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 609.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 610.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 611.000 MHz SC-QAM (Annex A(Eu.1M)) locked SC-QAM
[02:50:11 01/01/1970] [CmDocsisCtlThread] BcmCmDsChan::DsLockOk: (BcmCmDsChan 0)
hwRxId=0 freq=0 dcid=0

******************************************
DOWNSTREAM STATUS
******************************************
HW Channel ID = 0
Phy type: SC-QAM
DS active chan settings:
ds chan id = 0
center freq, Hz = 611000000 Hz
primary capable = false
status event rpt bitmask = 0

CM HW Detected DS Phy Settings:


Center Freq, Hz = 611000000
QAM = Locked
FEC = Locked
Carrier Freq Offset, kHz = 0
Channel Width, Hz = 8000000
Modulation = Qam256
Interleaver = Taps12Incr17
Symbol Rate, sym/sec = 6952000

******************************************

[02:50:11 01/01/1970] [CmDocsisCtlThread]


BcmCmMacDomainSetsState::StartDsMacMddInit:
**********************************************
Waiting for MDDs...
**********************************************

CM/DocsisCtl>
BcmCmDocsisCtlMsgACT::HandleEvent() @time=10211760 event_code=4
(kCmPriDsMddSetsOk)
MDD diplexer band edge not specified.
MDD Plant US Frequency Range = extended.
Requested Spectrum = US:(0 MHz..85 MHz) DS:(0 MHz..0 MHz)
Best Match = 0: US:(5 MHz..85 MHz) DS:(108 MHz..1218 MHz)
Switchable diplexer ECN support disabled. NOT switching diplexer.
[02:50:11 01/01/1970] [CmDocsisCtlThread]
BcmCmMdDsSgDiscState::TrimSgSetWithoutThisDcid:
1 candidate MD-DS-SG remain after TrimSgSetWithoutThisDcid( target_dcid )
for target_dcid=0x0b (11)
[02:50:11 01/01/1970] [CmDocsisCtlThread] BcmCmMdDsSgDiscState::StartMdDsSgDisc:
special case: one and only one MD-DS-SG contains mdd_dcid.
fMdDsSgId=0x1d (29)
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , M-d++a+i-+Ty-eA+dA++e|:
i_L-ca+A++e|A: 1
Chec+ +D_A++e|A
Cha++e+ Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1
MD-DS-SG discovery info:

fCmMdDsSgDiscState = 6 (kMdDsSgDiscDone)
fMdDsSgId = 0x1d (29)
fMdDsSgDiscovered = true

Trimmed Candidate Downstream Service Group Settings List: list size = 1

sgid size member dcid's


---- ---- -------------
29 34 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
27 28 29 30 31 32 159 160

Downstream Active Channel Settings List:

dcid type frequency prim capable rpt enable mod/annex or PLC params
---- -------- --------- ------------ ---------- -----------------------
1 SC-QAM 531000000 y 0x36 256QAM/AnnexA
2 SC-QAM 539000000 y 0x36 256QAM/AnnexA
3 SC-QAM 547000000 y 0x36 256QAM/AnnexA
4 SC-QAM 555000000 y 0x36 256QAM/AnnexA
5 SC-QAM 563000000 y 0x36 256QAM/AnnexA
6 SC-QAM 571000000 y 0x36 256QAM/AnnexA
7 SC-QAM 579000000 y 0x36 256QAM/AnnexA
8 SC-QAM 587000000 y 0x36 256QAM/AnnexA
9 SC-QAM 595000000 y 0x36 256QAM/AnnexA
10 SC-QAM 603000000 y 0x36 256QAM/AnnexA
11 SC-QAM 611000000 y 0x36 256QAM/AnnexA
12 SC-QAM 619000000 y 0x36 256QAM/AnnexA
13 SC-QAM 627000000 y 0x36 256QAM/AnnexA
14 SC-QAM 635000000 y 0x36 256QAM/AnnexA
15 SC-QAM 643000000 y 0x36 256QAM/AnnexA
16 SC-QAM 651000000 y 0x36 256QAM/AnnexA
17 SC-QAM 659000000 y 0x36 256QAM/AnnexA
18 SC-QAM 667000000 y 0x36 256QAM/AnnexA
19 SC-QAM 675000000 y 0x36 256QAM/AnnexA
20 SC-QAM 683000000 y 0x36 256QAM/AnnexA
21 SC-QAM 691000000 y 0x36 256QAM/AnnexA
22 SC-QAM 699000000 y 0x36 256QAM/AnnexA
23 SC-QAM 707000000 y 0x36 256QAM/AnnexA
24 SC-QAM 715000000 y 0x36 256QAM/AnnexA
25 SC-QAM 723000000 y 0x36 256QAM/AnnexA
26 SC-QAM 731000000 y 0x36 256QAM/AnnexA
27 SC-QAM 739000000 y 0x36 256QAM/AnnexA
28 SC-QAM 747000000 y 0x36 256QAM/AnnexA
29 SC-QAM 755000000 y 0x36 256QAM/AnnexA
30 SC-QAM 763000000 y 0x36 256QAM/AnnexA
31 SC-QAM 771000000 y 0x36 256QAM/AnnexA
32 SC-QAM 779000000 y 0x36 256QAM/AnnexA
159 OFDM PLC 897000000 n 0x36 25Khz/5us/0.625us
160 OFDM PLC 361000000 n 0x36 50Khz/0.9375us/0.625us

Trimmed Downstream Ambiguity Resolution Frequency List: list size = 3

531000000-sc_qam 539000000-sc_qam 547000000-sc_qam


visible dcid set = 11

freq with visible dcid set = 611000000

BcmCmDocsisCtlMsgACT::HandleEvent() @time=10212360 event_code=11


(kCmMdDsSgDiscDone)
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=true
[02:50:12 01/01/1970] [CmDocsisCtlThread]
BcmDocsisCmHalIf::SetPrimaryDownstreamChannel: (DOCSIS CableModem HalIf)
Installing primary downstream channel index: 0
SetRatios called with primary downstream channel number = 0
AnnexMode[0] = 1 QAM_Mode[0] = 256
Num/Den = 869/1280
3390 SCDMA/OFDM mode - ChannelNumber = 0 Numerator = 869 Denominator = 1280
CM/DocsisCtl> [02:50:12 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL failed to acquire sync or lost sync!
... TCOFDM - DTR is now locked.... (T2=150ms Sync=14)

Given a 216 MHz TCOFDM clock, the nominal value for the DTR FCW is 0xC22E45067
The DTR FCW is 0xc22e96a6 - that value is good (6, within 100 ppm)
Kicked off the DPLL
LE Done bit was set
LE Done bit was set
SCQAM DS clock source.
PLL in Leaky mode.
PLL Fn = 6, k1 = 18, k2 = 19
[02:50:12 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context=1 (ErrorRecovery)
[02:50:12 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context is error recovery or startup.
Always use last good upstream target chan id=1
[02:50:12 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper) Locked on the downstream. Waiting for UCDs...
[02:50:12 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefFail: (Cm
Multi US Helper) target hwTxId=0
CM/DocsisCtl> [02:50:14 01/01/1970] [CmDocsisCtlThread]
BcmCmMultiUsHelper::TmUcdRxTimerEvent: (Cm Multi US Helper)
ucd gathering ok.

[02:50:14 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper) state at
entry:

Channel targeting:
Downstream:
fTargetDsFreqHz = 0 (0)
fCurrentDsFreqHz = 0x246b1ec0 (611000000)
fStoredDsFreqHz = 0x29020c00 (688000000)

Upstream:
fDestSingleTxTargetUsChanId = 0x1 (1)
fTargetingContext = 1 (ErrorRecovery)
Startup UCD Selection Info:

low priority candidate ucid list = 3 2 4 1 7 8 6 5


happy home ucid set = 1 2 3 4

Upstream Active Channel Settings:

ucid rpt enable sel prio MAP source dcid's


---- ---------- -------- -----------------
1 0x1c0 0
2 0x1c0 0
3 0x1c0 0
4 0x1c0 0
5 0x1c0 0
6 0x1c0 0
7 0x1c0 0
8 0x1c0 0

BcmCmUsTargetMset (a.k.a. usable UCDs gathered during startup):

us config
phy change ranging scdma
type ucid dcid count tried? enabled?
---- ---- ---- ------ ------- --------
3 1 11 4 n n
3 2 11 4 n n
3 3 11 4 n n
3 4 11 4 n n
3 5 11 4 n n
3 6 11 4 n n
3 7 11 4 n n
3 8 11 4 n n

[02:50:14 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper)
starting docs3 upstream initialization on target ucid=3
with upstream phy type 3 on hardware transmitter index 0

[02:50:14 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::ExecuteTccCmd: hwTxId=0


docs ucid=0
[02:50:14 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0
[02:50:14 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::InstallUsSets: Installing
UCD w/ucid for UCID=3 for CM hardware tx chan 0

[02:50:14 01/01/1970] [CmDocsisCtlThread]


BcmCmUsSetsState::TestAndLaunchUsTimeSync: starting upstream time sync
acquisition...
[02:50:14 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefOk: (Cm
Multi US Helper) target hwTxId=0
[02:50:14 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::UsTimeRefOk: upstream time
sync acquired for fHwTxId=0

== Beginning initial ranging for Docsis UCID 3 ==


Minimum transmit power is 17 dBmV
Maximum transmit power is 53 dBmV
Stored power level for UCID 3 is 38 dBmV
Using per transmitter stored initial upstream power = 38 dBmV hwTxId = 0 docsis
UCID = 3
RNG-RSP UsChanId=3 Adj: tim=1854 freq=-119 Stat=Continue (CmdPwr (UsChanId-
dBmV): (3-41.25) )
[02:50:15 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0xc9
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (3-
41.25) )
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (3-
41.25) )
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (3-
41.25) )
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (3-
41.25) )
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Success (CmdPwr (UsChanId-dBmV): (3-
41.25) )
[02:50:20 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::FirstRngSuccess:
(CmDocsisCtlThread)
first RNG-RSP w/status==SUCCESS for hwTxId=0 and DOCSIS ucid=3
[02:50:20 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::LaunchEaeBpkm:
(CmDocsisCtlThread) BPKM enabled. starting Early Authentication and Encryption BPKM
key requests. Primary Sid = 201
CM/DocsisCtl> Bandwidth request failure! Status = 0

BcmCmUsChanTimerMuxACT::HandleEvent() @time=10409740 fTimerType=5


(kT4NoStationMaint) hwTxId=0 docs ucid=3
[02:53:29 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::T4NoStationMaintEvent: ERROR - no Station Maint map op error.
hwTxId=0 docs ucid=3
[02:53:29 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::CommonRngErrorHandler: reason=10 (T4NoStationMaintTimeout)
hwTxId=0 docs ucid=3
[02:53:29 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) Purging DS
frequency 611000000 from current scan pass due to pre-registration restart error
[02:53:29 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) reinit MAC #47:
T4NoStationMaintTimeout

[02:53:29 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::Reset:


(CmDocsisCtlThread) DefaultSnmpAgentClass::RestartPendingEvent for Vendor CM
Agent w/ BRCM Factory Support
Logging event: Received Response to Broadcast Maintenance Request, But no Unicast
Maintenance opportunities received - T4 time out;CM-MAC=fc:4a:e9:de:ad:88;CMTS-
MAC=28:52:61:fa:d8:78;CM-QOS=1.1;CM-VER=3.1;
Vendor CM Agent w/ BRCM Factory Support updating ifTableLastChange.
Vendor CM Agent w/ BRCM Factory Support resetting to default state.
Vendor CM Agent w/ BRCM Factory Support destroying users...
Vendor CM Agent w/ BRCM Factory Support destroying notifies...
Vendor CM Agent w/ BRCM Factory Support destroying views...
Allowing DOCS-CABLE-DEVICE-MIB IP filters.
Vendor CM Agent w/ BRCM Factory Support deferring traps.
CM/DocsisCtl> Received RG Event 0x80000001 State 0x1
eRouter Linux WAN Down
[02:53:30 01/01/1970] [eRouterMsgPipe] eRouterMsgPipe::UpdateIpNetToMediaEntry:
(eRouterMsgPipe) eRouter IP address:0.0.0.0
02:53:30.030 01/01/1970 (CALC) mtaCmStatusInfo() - MTA is Signaled: *NOT-
OPERATIONAL* (Stat=0x1) emtaCurState = 0.
EmtaSnmpAgent::SoftReset
Pausing trap thread
emta factory agentResetting to default state.
emta factory agent destroying users...
emta factory agent destroying notifies...
emta factory agent destroying views...
emta factory agent entering RFC-2576 Coexistence security mode.
emta factory agent entering Basic/Hybrid flow provisioning mode.
Resuming trap thread
Stopping DHCP/ToD/TFTP (client requested)...
[02:53:30 01/01/1970] [CmDocsisIpThread] BcmEcosIpHalIf::RemoveIpv6Address: (IP
Stack1 HalIf) ERROR - Failed to remove IPv6 address fe80::fe4a:e9ff:fede:ad88/64
from the stack!
[02:53:30 01/01/1970] [CmDocsisIpThread] BcmDhcpV6ClientIf::ReleaseAddresses:
(DHCPv6 ClientIf for IP Stack1) ERROR - IA state is initial; there is no address to
release.
BcmDocsis3DsMacEnableMulticastDsidForwarding 0; primary DS = 0
SCQAM DSID filter control = 0x00
OFDM DSID filter control = 0x01
Deleting DOCSIS 1.0 CoS Settings for SID 0xc9
[02:53:30 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows:
(DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along
with associated Classifiers and PHS rules...
[02:53:30 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState:
(CmDocsisCtlThread)
[02:53:30 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Primary SID for usHwChannel 0 to 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 1
Updating US chan 8 data Profile test msg for Sid: 0x0.
Updating US chan 9 data Profile test msg for Sid: 0x0.
CM/DocsisCtl> [02:53:31 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL declared PULSE lost!
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=false
[02:53:31 01/01/1970] [CmDocsisCtlThread] BcmCmMultiDsHelper::PreRegDsChanChange:
target freq hz = 0
reason string = ErrorRecovery
CmInitReason = 16

Starting DS scanning...
[02:53:31 01/01/1970] [CmDocsisCtlThread] BcmCmDownstreamScan::StartScan: Starting
DS scan
Checking for cable cut...

CM/DocsisCtl> Plant power is 15.65

Cable connected

CM/DocsisCtl> Scanning 612.000 MHz SC-QAM (Annex A(Eu.1M))


Scanning 613.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 614.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 615.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 616.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 617.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 618.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 619.000 MHz SC-QAM (Annex A(Eu.1M)) locked SC-QAM
[02:53:34 01/01/1970] [CmDocsisCtlThread] BcmCmDsChan::DsLockOk: (BcmCmDsChan 0)
hwRxId=0 freq=0 dcid=0

******************************************
DOWNSTREAM STATUS
******************************************
HW Channel ID = 0
Phy type: SC-QAM
DS active chan settings:
ds chan id = 0
center freq, Hz = 619000000 Hz
primary capable = false
status event rpt bitmask = 0

CM HW Detected DS Phy Settings:


Center Freq, Hz = 619000000
QAM = Locked
FEC = Locked
Carrier Freq Offset, kHz = 0
Channel Width, Hz = 8000000
Modulation = Qam256
Interleaver = Taps12Incr17
Symbol Rate, sym/sec = 6952000

******************************************

[02:53:34 01/01/1970] [CmDocsisCtlThread]


BcmCmMacDomainSetsState::StartDsMacMddInit:
**********************************************
Waiting for MDDs...
**********************************************

CM/DocsisCtl>
BcmCmDocsisCtlMsgACT::HandleEvent() @time=10415770 event_code=4
(kCmPriDsMddSetsOk)
MDD diplexer band edge not specified.
MDD Plant US Frequency Range = extended.
Requested Spectrum = US:(0 MHz..85 MHz) DS:(0 MHz..0 MHz)
Best Match = 0: US:(5 MHz..85 MHz) DS:(108 MHz..1218 MHz)
Switchable diplexer ECN support disabled. NOT switching diplexer.
[02:53:35 01/01/1970] [CmDocsisCtlThread]
BcmCmMdDsSgDiscState::TrimSgSetWithoutThisDcid:
1 candidate MD-DS-SG remain after TrimSgSetWithoutThisDcid( target_dcid )
for target_dcid=0x0c (12)
[02:53:35 01/01/1970] [CmDocsisCtlThread] BcmCmMdDsSgDiscState::StartMdDsSgDisc:
special case: one and only one MD-DS-SG contains mdd_dcid.
fMdDsSgId=0x1d (29)
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , M-d++a+i-+Ty-eA+dA++e|:
i_L-ca+A++e|A: 1
Chec+ +D_A++e|A
Cha++e+ Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1

MD-DS-SG discovery info:

fCmMdDsSgDiscState = 6 (kMdDsSgDiscDone)
fMdDsSgId = 0x1d (29)
fMdDsSgDiscovered = true

Trimmed Candidate Downstream Service Group Settings List: list size = 1

sgid size member dcid's


---- ---- -------------
29 34 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
27 28 29 30 31 32 159 160

Downstream Active Channel Settings List:

dcid type frequency prim capable rpt enable mod/annex or PLC params
---- -------- --------- ------------ ---------- -----------------------
1 SC-QAM 531000000 y 0x36 256QAM/AnnexA
2 SC-QAM 539000000 y 0x36 256QAM/AnnexA
3 SC-QAM 547000000 y 0x36 256QAM/AnnexA
4 SC-QAM 555000000 y 0x36 256QAM/AnnexA
5 SC-QAM 563000000 y 0x36 256QAM/AnnexA
6 SC-QAM 571000000 y 0x36 256QAM/AnnexA
7 SC-QAM 579000000 y 0x36 256QAM/AnnexA
8 SC-QAM 587000000 y 0x36 256QAM/AnnexA
9 SC-QAM 595000000 y 0x36 256QAM/AnnexA
10 SC-QAM 603000000 y 0x36 256QAM/AnnexA
11 SC-QAM 611000000 y 0x36 256QAM/AnnexA
12 SC-QAM 619000000 y 0x36 256QAM/AnnexA
13 SC-QAM 627000000 y 0x36 256QAM/AnnexA
14 SC-QAM 635000000 y 0x36 256QAM/AnnexA
15 SC-QAM 643000000 y 0x36 256QAM/AnnexA
16 SC-QAM 651000000 y 0x36 256QAM/AnnexA
17 SC-QAM 659000000 y 0x36 256QAM/AnnexA
18 SC-QAM 667000000 y 0x36 256QAM/AnnexA
19 SC-QAM 675000000 y 0x36 256QAM/AnnexA
20 SC-QAM 683000000 y 0x36 256QAM/AnnexA
21 SC-QAM 691000000 y 0x36 256QAM/AnnexA
22 SC-QAM 699000000 y 0x36 256QAM/AnnexA
23 SC-QAM 707000000 y 0x36 256QAM/AnnexA
24 SC-QAM 715000000 y 0x36 256QAM/AnnexA
25 SC-QAM 723000000 y 0x36 256QAM/AnnexA
26 SC-QAM 731000000 y 0x36 256QAM/AnnexA
27 SC-QAM 739000000 y 0x36 256QAM/AnnexA
28 SC-QAM 747000000 y 0x36 256QAM/AnnexA
29 SC-QAM 755000000 y 0x36 256QAM/AnnexA
30 SC-QAM 763000000 y 0x36 256QAM/AnnexA
31 SC-QAM 771000000 y 0x36 256QAM/AnnexA
32 SC-QAM 779000000 y 0x36 256QAM/AnnexA
159 OFDM PLC 897000000 n 0x36 25Khz/5us/0.625us
160 OFDM PLC 361000000 n 0x36 50Khz/0.9375us/0.625us

Trimmed Downstream Ambiguity Resolution Frequency List: list size = 3

531000000-sc_qam 539000000-sc_qam 547000000-sc_qam

visible dcid set = 12

freq with visible dcid set = 619000000

BcmCmDocsisCtlMsgACT::HandleEvent() @time=10416360 event_code=11


(kCmMdDsSgDiscDone)
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=true
[02:53:36 01/01/1970] [CmDocsisCtlThread]
BcmDocsisCmHalIf::SetPrimaryDownstreamChannel: (DOCSIS CableModem HalIf)
Installing primary downstream channel index: 0
SetRatios called with primary downstream channel number = 0
AnnexMode[0] = 1 QAM_Mode[0] = 256
Num/Den = 869/1280
3390 SCDMA/OFDM mode - ChannelNumber = 0 Numerator = 869 Denominator = 1280
CM/DocsisCtl> [02:53:36 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL failed to acquire sync or lost sync!
... TCOFDM - DTR is now locked.... (T2=150ms Sync=14)

Given a 216 MHz TCOFDM clock, the nominal value for the DTR FCW is 0xC22E45067
The DTR FCW is 0xc22e9433 - that value is good (6, within 100 ppm)
Kicked off the DPLL
LE Done bit was set
LE Done bit was set
SCQAM DS clock source.
PLL in Leaky mode.
PLL Fn = 6, k1 = 18, k2 = 19
[02:53:36 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context=1 (ErrorRecovery)
[02:53:36 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context is error recovery or startup.
Always use last good upstream target chan id=1
[02:53:36 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper) Locked on the downstream. Waiting for UCDs...
[02:53:36 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefFail: (Cm
Multi US Helper) target hwTxId=0
CM/DocsisCtl> [02:53:38 01/01/1970] [CmDocsisCtlThread]
BcmCmMultiUsHelper::TmUcdRxTimerEvent: (Cm Multi US Helper)
ucd gathering ok.

[02:53:38 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper) state at
entry:

Channel targeting:
Downstream:
fTargetDsFreqHz = 0 (0)
fCurrentDsFreqHz = 0x24e530c0 (619000000)
fStoredDsFreqHz = 0x29020c00 (688000000)

Upstream:
fDestSingleTxTargetUsChanId = 0x1 (1)
fTargetingContext = 1 (ErrorRecovery)

Startup UCD Selection Info:

low priority candidate ucid list = 2 3 1 4 5 8 7 6


happy home ucid set = 1 2 3 4

Upstream Active Channel Settings:

ucid rpt enable sel prio MAP source dcid's


---- ---------- -------- -----------------
1 0x1c0 0
2 0x1c0 0
3 0x1c0 0
4 0x1c0 0
5 0x1c0 0
6 0x1c0 0
7 0x1c0 0
8 0x1c0 0

BcmCmUsTargetMset (a.k.a. usable UCDs gathered during startup):

us config
phy change ranging scdma
type ucid dcid count tried? enabled?
---- ---- ---- ------ ------- --------
3 1 12 4 n n
3 2 12 4 n n
3 3 12 4 n n
3 4 12 4 n n
3 5 12 4 n n
3 6 12 4 n n
3 7 12 4 n n
3 8 12 4 n n

[02:53:38 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper)
starting docs3 upstream initialization on target ucid=2
with upstream phy type 3 on hardware transmitter index 0

[02:53:38 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::ExecuteTccCmd: hwTxId=0


docs ucid=0
[02:53:38 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0
[02:53:38 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::InstallUsSets: Installing
UCD w/ucid for UCID=2 for CM hardware tx chan 0

[02:53:38 01/01/1970] [CmDocsisCtlThread]


BcmCmUsSetsState::TestAndLaunchUsTimeSync: starting upstream time sync
acquisition...
[02:53:38 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefOk: (Cm
Multi US Helper) target hwTxId=0
[02:53:38 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::UsTimeRefOk: upstream time
sync acquired for fHwTxId=0

== Beginning initial ranging for Docsis UCID 2 ==


Minimum transmit power is 17 dBmV
Maximum transmit power is 53 dBmV
Stored power level for UCID 2 is 38 dBmV
Using per transmitter stored initial upstream power = 38 dBmV hwTxId = 0 docsis
UCID = 2
RNG-RSP UsChanId=2 Adj: tim=1956 freq=17 Stat=Continue (CmdPwr (UsChanId-dBmV):
(2-40.50) )
[02:53:39 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0xc9
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (2-
41.00) )
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (2-
41.00) )
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (2-
41.00) )
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (2-
41.00) )
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Success (CmdPwr (UsChanId-dBmV): (2-
41.00) )
[02:53:45 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::FirstRngSuccess:
(CmDocsisCtlThread)
first RNG-RSP w/status==SUCCESS for hwTxId=0 and DOCSIS ucid=2
[02:53:45 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::LaunchEaeBpkm:
(CmDocsisCtlThread) BPKM enabled. starting Early Authentication and Encryption BPKM
key requests. Primary Sid = 201
CM/DocsisCtl> Bandwidth request failure! Status = 0
BcmCmUsChanTimerMuxACT::HandleEvent() @time=10614790 fTimerType=5
(kT4NoStationMaint) hwTxId=0 docs ucid=2
[02:56:54 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::T4NoStationMaintEvent: ERROR - no Station Maint map op error.
hwTxId=0 docs ucid=2
[02:56:54 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::CommonRngErrorHandler: reason=10 (T4NoStationMaintTimeout)
hwTxId=0 docs ucid=2
[02:56:54 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) Purging DS
frequency 619000000 from current scan pass due to pre-registration restart error
[02:56:54 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) reinit MAC #48:
T4NoStationMaintTimeout

[02:56:54 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::Reset:


(CmDocsisCtlThread) DefaultSnmpAgentClass::RestartPendingEvent for Vendor CM
Agent w/ BRCM Factory Support
Logging event: Received Response to Broadcast Maintenance Request, But no Unicast
Maintenance opportunities received - T4 time out;CM-MAC=fc:4a:e9:de:ad:88;CMTS-
MAC=28:52:61:fa:d8:78;CM-QOS=1.1;CM-VER=3.1;
Vendor CM Agent w/ BRCM Factory Support updating ifTableLastChange.
Vendor CM Agent w/ BRCM Factory Support resetting to default state.
Vendor CM Agent w/ BRCM Factory Support destroying users...
Vendor CM Agent w/ BRCM Factory Support destroying notifies...
Vendor CM Agent w/ BRCM Factory Support destroying views...
Allowing DOCS-CABLE-DEVICE-MIB IP filters.
Vendor CM Agent w/ BRCM Factory Support deferring traps.
Received RG Event 0x80000001 State 0x1
eRouter Linux WAN Down
[02:56:55 01/01/1970] [eRouterMsgPipe] eRouterMsgPipe::UpdateIpNetToMediaEntry:
(eRouterMsgPipe) eRouter IP address:0.0.0.0
02:56:55.080 01/01/1970 (CALC) mtaCmStatusInfo() - MTA is Signaled: *NOT-
OPERATIONAL* (Stat=0x1) emtaCurState = 0.
EmtaSnmpAgent::SoftReset
Pausing trap thread
emta factory agentResetting to default state.
emta factory agent destroying users...
emta factory agent destroying notifies...
emta factory agent destroying views...
emta factory agent entering RFC-2576 Coexistence security mode.
emta factory agent entering Basic/Hybrid flow provisioning mode.
Resuming trap thread
Stopping DHCP/ToD/TFTP (client requested)...
[02:56:55 01/01/1970] [CmDocsisIpThread] BcmEcosIpHalIf::RemoveIpv6Address: (IP
Stack1 HalIf) ERROR - Failed to remove IPv6 address fe80::fe4a:e9ff:fede:ad88/64
from the stack!
[02:56:55 01/01/1970] [CmDocsisIpThread] BcmDhcpV6ClientIf::ReleaseAddresses:
(DHCPv6 ClientIf for IP Stack1) ERROR - IA state is initial; there is no address to
release.
BcmDocsis3DsMacEnableMulticastDsidForwarding 0; primary DS = 0
SCQAM DSID filter control = 0x00
OFDM DSID filter control = 0x01
Deleting DOCSIS 1.0 CoS Settings for SID 0xc9
[02:56:55 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows:
(DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along
with associated Classifiers and PHS rules...
[02:56:55 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState:
(CmDocsisCtlThread)
[02:56:55 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Primary SID for usHwChannel 0 to 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 1
Updating US chan 8 data Profile test msg for Sid: 0x0.
Updating US chan 9 data Profile test msg for Sid: 0x0.
CM/DocsisCtl> [02:56:56 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL declared PULSE lost!
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=false
[02:56:56 01/01/1970] [CmDocsisCtlThread] BcmCmMultiDsHelper::PreRegDsChanChange:
target freq hz = 0
reason string = ErrorRecovery
CmInitReason = 16

Starting DS scanning...
[02:56:56 01/01/1970] [CmDocsisCtlThread] BcmCmDownstreamScan::StartScan: Starting
DS scan
Checking for cable cut...

CM/DocsisCtl> Plant power is 15.65

Cable connected

CM/DocsisCtl> Scanning 620.000 MHz SC-QAM (Annex A(Eu.1M))


Scanning 621.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 622.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 623.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 624.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 625.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 626.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 627.000 MHz SC-QAM (Annex A(Eu.1M)) locked SC-QAM
[02:56:59 01/01/1970] [CmDocsisCtlThread] BcmCmDsChan::DsLockOk: (BcmCmDsChan 0)
hwRxId=0 freq=0 dcid=0

******************************************
DOWNSTREAM STATUS
******************************************
HW Channel ID = 0
Phy type: SC-QAM
DS active chan settings:
ds chan id = 0
center freq, Hz = 627000000 Hz
primary capable = false
status event rpt bitmask = 0

CM HW Detected DS Phy Settings:


Center Freq, Hz = 627000000
QAM = Locked
FEC = Locked
Carrier Freq Offset, kHz = 0
Channel Width, Hz = 8000000
Modulation = Qam256
Interleaver = Taps12Incr17
Symbol Rate, sym/sec = 6952000

******************************************
[02:56:59 01/01/1970] [CmDocsisCtlThread]
BcmCmMacDomainSetsState::StartDsMacMddInit:
**********************************************
Waiting for MDDs...
**********************************************

CM/DocsisCtl>
BcmCmDocsisCtlMsgACT::HandleEvent() @time=10619770 event_code=4
(kCmPriDsMddSetsOk)
MDD diplexer band edge not specified.
MDD Plant US Frequency Range = extended.
Requested Spectrum = US:(0 MHz..85 MHz) DS:(0 MHz..0 MHz)
Best Match = 0: US:(5 MHz..85 MHz) DS:(108 MHz..1218 MHz)
Switchable diplexer ECN support disabled. NOT switching diplexer.
[02:56:59 01/01/1970] [CmDocsisCtlThread]
BcmCmMdDsSgDiscState::TrimSgSetWithoutThisDcid:
1 candidate MD-DS-SG remain after TrimSgSetWithoutThisDcid( target_dcid )
for target_dcid=0x0d (13)
[02:56:59 01/01/1970] [CmDocsisCtlThread] BcmCmMdDsSgDiscState::StartMdDsSgDisc:
special case: one and only one MD-DS-SG contains mdd_dcid.
fMdDsSgId=0x1d (29)
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , M-d++a+i-+Ty-eA+dA++e|:
i_L-ca+A++e|A: 1
Chec+ +D_A++e|A
Cha++e+ Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1

MD-DS-SG discovery info:

fCmMdDsSgDiscState = 6 (kMdDsSgDiscDone)
fMdDsSgId = 0x1d (29)
fMdDsSgDiscovered = true

Trimmed Candidate Downstream Service Group Settings List: list size = 1

sgid size member dcid's


---- ---- -------------
29 34 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
27 28 29 30 31 32 159 160

Downstream Active Channel Settings List:

dcid type frequency prim capable rpt enable mod/annex or PLC params
---- -------- --------- ------------ ---------- -----------------------
1 SC-QAM 531000000 y 0x36 256QAM/AnnexA
2 SC-QAM 539000000 y 0x36 256QAM/AnnexA
3 SC-QAM 547000000 y 0x36 256QAM/AnnexA
4 SC-QAM 555000000 y 0x36 256QAM/AnnexA
5 SC-QAM 563000000 y 0x36 256QAM/AnnexA
6 SC-QAM 571000000 y 0x36 256QAM/AnnexA
7 SC-QAM 579000000 y 0x36 256QAM/AnnexA
8 SC-QAM 587000000 y 0x36 256QAM/AnnexA
9 SC-QAM 595000000 y 0x36 256QAM/AnnexA
10 SC-QAM 603000000 y 0x36 256QAM/AnnexA
11 SC-QAM 611000000 y 0x36 256QAM/AnnexA
12 SC-QAM 619000000 y 0x36 256QAM/AnnexA
13 SC-QAM 627000000 y 0x36 256QAM/AnnexA
14 SC-QAM 635000000 y 0x36 256QAM/AnnexA
15 SC-QAM 643000000 y 0x36 256QAM/AnnexA
16 SC-QAM 651000000 y 0x36 256QAM/AnnexA
17 SC-QAM 659000000 y 0x36 256QAM/AnnexA
18 SC-QAM 667000000 y 0x36 256QAM/AnnexA
19 SC-QAM 675000000 y 0x36 256QAM/AnnexA
20 SC-QAM 683000000 y 0x36 256QAM/AnnexA
21 SC-QAM 691000000 y 0x36 256QAM/AnnexA
22 SC-QAM 699000000 y 0x36 256QAM/AnnexA
23 SC-QAM 707000000 y 0x36 256QAM/AnnexA
24 SC-QAM 715000000 y 0x36 256QAM/AnnexA
25 SC-QAM 723000000 y 0x36 256QAM/AnnexA
26 SC-QAM 731000000 y 0x36 256QAM/AnnexA
27 SC-QAM 739000000 y 0x36 256QAM/AnnexA
28 SC-QAM 747000000 y 0x36 256QAM/AnnexA
29 SC-QAM 755000000 y 0x36 256QAM/AnnexA
30 SC-QAM 763000000 y 0x36 256QAM/AnnexA
31 SC-QAM 771000000 y 0x36 256QAM/AnnexA
32 SC-QAM 779000000 y 0x36 256QAM/AnnexA
159 OFDM PLC 897000000 n 0x36 25Khz/5us/0.625us
160 OFDM PLC 361000000 n 0x36 50Khz/0.9375us/0.625us

Trimmed Downstream Ambiguity Resolution Frequency List: list size = 3

531000000-sc_qam 539000000-sc_qam 547000000-sc_qam

visible dcid set = 13

freq with visible dcid set = 627000000

BcmCmDocsisCtlMsgACT::HandleEvent() @time=10620360 event_code=11


(kCmMdDsSgDiscDone)
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=true
[02:57:00 01/01/1970] [CmDocsisCtlThread]
BcmDocsisCmHalIf::SetPrimaryDownstreamChannel: (DOCSIS CableModem HalIf)
Installing primary downstream channel index: 0
SetRatios called with primary downstream channel number = 0
AnnexMode[0] = 1 QAM_Mode[0] = 256
Num/Den = 869/1280
3390 SCDMA/OFDM mode - ChannelNumber = 0 Numerator = 869 Denominator = 1280
CM/DocsisCtl> [02:57:00 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL failed to acquire sync or lost sync!
... TCOFDM - DTR is now locked.... (T2=150ms Sync=14)

Given a 216 MHz TCOFDM clock, the nominal value for the DTR FCW is 0xC22E45067
The DTR FCW is 0xc22e9eb0 - that value is good (7, within 100 ppm)
Kicked off the DPLL
LE Done bit was set
LE Done bit was set
SCQAM DS clock source.
PLL in Leaky mode.
PLL Fn = 6, k1 = 18, k2 = 19
[02:57:00 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context=1 (ErrorRecovery)
[02:57:00 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context is error recovery or startup.
Always use last good upstream target chan id=1
[02:57:00 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper) Locked on the downstream. Waiting for UCDs...
[02:57:00 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefFail: (Cm
Multi US Helper) target hwTxId=0
CM/DocsisCtl> [02:57:02 01/01/1970] [CmDocsisCtlThread]
BcmCmMultiUsHelper::TmUcdRxTimerEvent: (Cm Multi US Helper)
ucd gathering ok.

[02:57:02 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper) state at
entry:

Channel targeting:
Downstream:
fTargetDsFreqHz = 0 (0)
fCurrentDsFreqHz = 0x255f42c0 (627000000)
fStoredDsFreqHz = 0x29020c00 (688000000)

Upstream:
fDestSingleTxTargetUsChanId = 0x1 (1)
fTargetingContext = 1 (ErrorRecovery)

Startup UCD Selection Info:

low priority candidate ucid list = 2 4 1 3 5 6 8 7


happy home ucid set = 1 2 3 4

Upstream Active Channel Settings:

ucid rpt enable sel prio MAP source dcid's


---- ---------- -------- -----------------
1 0x1c0 0
2 0x1c0 0
3 0x1c0 0
4 0x1c0 0
5 0x1c0 0
6 0x1c0 0
7 0x1c0 0
8 0x1c0 0

BcmCmUsTargetMset (a.k.a. usable UCDs gathered during startup):

us config
phy change ranging scdma
type ucid dcid count tried? enabled?
---- ---- ---- ------ ------- --------
3 1 13 4 n n
3 2 13 4 n n
3 3 13 4 n n
3 4 13 4 n n
3 5 13 4 n n
3 6 13 4 n n
3 7 13 4 n n
3 8 13 4 n n

[02:57:02 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper)
starting docs3 upstream initialization on target ucid=2
with upstream phy type 3 on hardware transmitter index 0

[02:57:02 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::ExecuteTccCmd: hwTxId=0


docs ucid=0
[02:57:02 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0
[02:57:02 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::InstallUsSets: Installing
UCD w/ucid for UCID=2 for CM hardware tx chan 0

[02:57:02 01/01/1970] [CmDocsisCtlThread]


BcmCmUsSetsState::TestAndLaunchUsTimeSync: starting upstream time sync
acquisition...
[02:57:02 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefOk: (Cm
Multi US Helper) target hwTxId=0
[02:57:02 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::UsTimeRefOk: upstream time
sync acquired for fHwTxId=0

== Beginning initial ranging for Docsis UCID 2 ==


Minimum transmit power is 17 dBmV
Maximum transmit power is 53 dBmV
Stored power level for UCID 2 is 38 dBmV
Using per transmitter stored initial upstream power = 38 dBmV hwTxId = 0 docsis
UCID = 2
RNG-RSP UsChanId=2 Adj: tim=1946 freq=19 Stat=Continue (CmdPwr (UsChanId-dBmV):
(2-40.50) )
[02:57:03 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0xc9
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (2-
41.00) )
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (2-
41.00) )
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (2-
41.00) )
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (2-
41.00) )
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Success (CmdPwr (UsChanId-dBmV): (2-
41.00) )
[02:57:08 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::FirstRngSuccess:
(CmDocsisCtlThread)
first RNG-RSP w/status==SUCCESS for hwTxId=0 and DOCSIS ucid=2
[02:57:08 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::LaunchEaeBpkm:
(CmDocsisCtlThread) BPKM enabled. starting Early Authentication and Encryption BPKM
key requests. Primary Sid = 201
CM/DocsisCtl> Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0

BcmCmUsChanTimerMuxACT::HandleEvent() @time=10818070 fTimerType=5


(kT4NoStationMaint) hwTxId=0 docs ucid=2
[03:00:18 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::T4NoStationMaintEvent: ERROR - no Station Maint map op error.
hwTxId=0 docs ucid=2
[03:00:18 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::CommonRngErrorHandler: reason=10 (T4NoStationMaintTimeout)
hwTxId=0 docs ucid=2
[03:00:18 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) Purging DS
frequency 627000000 from current scan pass due to pre-registration restart error
[03:00:18 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) reinit MAC #49:
T4NoStationMaintTimeout

[03:00:18 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::Reset:


(CmDocsisCtlThread) DefaultSnmpAgentClass::RestartPendingEvent for Vendor CM
Agent w/ BRCM Factory Support
Logging event: Received Response to Broadcast Maintenance Request, But no Unicast
Maintenance opportunities received - T4 time out;CM-MAC=fc:4a:e9:de:ad:88;CMTS-
MAC=28:52:61:fa:d8:78;CM-QOS=1.1;CM-VER=3.1;
Vendor CM Agent w/ BRCM Factory Support updating ifTableLastChange.
Vendor CM Agent w/ BRCM Factory Support resetting to default state.
Vendor CM Agent w/ BRCM Factory Support destroying users...
Vendor CM Agent w/ BRCM Factory Support destroying notifies...
Vendor CM Agent w/ BRCM Factory Support destroying views...
Allowing DOCS-CABLE-DEVICE-MIB IP filters.
Vendor CM Agent w/ BRCM Factory Support deferring traps.
Received RG Event 0x80000001 State 0x1
eRouter Linux WAN Down
[03:00:18 01/01/1970] [eRouterMsgPipe] eRouterMsgPipe::UpdateIpNetToMediaEntry:
(eRouterMsgPipe) eRouter IP address:0.0.0.0
03:00:18.360 01/01/1970 (CALC) mtaCmStatusInfo() - MTA is Signaled: *NOT-
OPERATIONAL* (Stat=0x1) emtaCurState = 0.
EmtaSnmpAgent::SoftReset
Pausing trap thread
emta factory agentResetting to default state.
emta factory agent destroying users...
emta factory agent destroying notifies...
emta factory agent destroying views...
emta factory agent entering RFC-2576 Coexistence security mode.
emta factory agent entering Basic/Hybrid flow provisioning mode.
Resuming trap thread
Stopping DHCP/ToD/TFTP (client requested)...
[03:00:18 01/01/1970] [CmDocsisIpThread] BcmEcosIpHalIf::RemoveIpv6Address: (IP
Stack1 HalIf) ERROR - Failed to remove IPv6 address fe80::fe4a:e9ff:fede:ad88/64
from the stack!
[03:00:18 01/01/1970] [CmDocsisIpThread] BcmDhcpV6ClientIf::ReleaseAddresses:
(DHCPv6 ClientIf for IP Stack1) ERROR - IA state is initial; there is no address to
release.
BcmDocsis3DsMacEnableMulticastDsidForwarding 0; primary DS = 0
SCQAM DSID filter control = 0x00
OFDM DSID filter control = 0x01
Deleting DOCSIS 1.0 CoS Settings for SID 0xc9
[03:00:18 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows:
(DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along
with associated Classifiers and PHS rules...
[03:00:18 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState:
(CmDocsisCtlThread)
[03:00:18 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Primary SID for usHwChannel 0 to 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 1
Updating US chan 8 data Profile test msg for Sid: 0x0.
Updating US chan 9 data Profile test msg for Sid: 0x0.
CM/DocsisCtl> [03:00:19 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL declared PULSE lost!
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=false
[03:00:19 01/01/1970] [CmDocsisCtlThread] BcmCmMultiDsHelper::PreRegDsChanChange:
target freq hz = 0
reason string = ErrorRecovery
CmInitReason = 16

Starting DS scanning...
[03:00:19 01/01/1970] [CmDocsisCtlThread] BcmCmDownstreamScan::StartScan: Starting
DS scan
Checking for cable cut...

CM/DocsisCtl> Plant power is 15.65

Cable connected

Scanning 628.000 MHz SC-QAM (Annex A(Eu.1M))


CM/DocsisCtl> Scanning 629.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 630.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 631.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 632.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 633.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 634.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 635.000 MHz SC-QAM (Annex A(Eu.1M)) locked SC-QAM
[03:00:22 01/01/1970] [CmDocsisCtlThread] BcmCmDsChan::DsLockOk: (BcmCmDsChan 0)
hwRxId=0 freq=0 dcid=0

******************************************
DOWNSTREAM STATUS
******************************************
HW Channel ID = 0
Phy type: SC-QAM
DS active chan settings:
ds chan id = 0
center freq, Hz = 635000000 Hz
primary capable = false
status event rpt bitmask = 0

CM HW Detected DS Phy Settings:


Center Freq, Hz = 635000000
QAM = Locked
FEC = Locked
Carrier Freq Offset, kHz = 0
Channel Width, Hz = 8000000
Modulation = Qam256
Interleaver = Taps12Incr17
Symbol Rate, sym/sec = 6952000

******************************************

[03:00:22 01/01/1970] [CmDocsisCtlThread]


BcmCmMacDomainSetsState::StartDsMacMddInit:
**********************************************
Waiting for MDDs...
**********************************************

CM/DocsisCtl>
BcmCmDocsisCtlMsgACT::HandleEvent() @time=10823770 event_code=4
(kCmPriDsMddSetsOk)
MDD diplexer band edge not specified.
MDD Plant US Frequency Range = extended.
Requested Spectrum = US:(0 MHz..85 MHz) DS:(0 MHz..0 MHz)
Best Match = 0: US:(5 MHz..85 MHz) DS:(108 MHz..1218 MHz)
Switchable diplexer ECN support disabled. NOT switching diplexer.
[03:00:23 01/01/1970] [CmDocsisCtlThread]
BcmCmMdDsSgDiscState::TrimSgSetWithoutThisDcid:
1 candidate MD-DS-SG remain after TrimSgSetWithoutThisDcid( target_dcid )
for target_dcid=0x0e (14)
[03:00:23 01/01/1970] [CmDocsisCtlThread] BcmCmMdDsSgDiscState::StartMdDsSgDisc:
special case: one and only one MD-DS-SG contains mdd_dcid.
fMdDsSgId=0x1d (29)
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , M-d++a+i-+Ty-eA+dA++e|:
i_L-ca+A++e|A: 1
Chec+ +D_A++e|A
Cha++e+ Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1

MD-DS-SG discovery info:

fCmMdDsSgDiscState = 6 (kMdDsSgDiscDone)
fMdDsSgId = 0x1d (29)
fMdDsSgDiscovered = true

Trimmed Candidate Downstream Service Group Settings List: list size = 1

sgid size member dcid's


---- ---- -------------
29 34 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
27 28 29 30 31 32 159 160

Downstream Active Channel Settings List:


dcid type frequency prim capable rpt enable mod/annex or PLC params
---- -------- --------- ------------ ---------- -----------------------
1 SC-QAM 531000000 y 0x36 256QAM/AnnexA
2 SC-QAM 539000000 y 0x36 256QAM/AnnexA
3 SC-QAM 547000000 y 0x36 256QAM/AnnexA
4 SC-QAM 555000000 y 0x36 256QAM/AnnexA
5 SC-QAM 563000000 y 0x36 256QAM/AnnexA
6 SC-QAM 571000000 y 0x36 256QAM/AnnexA
7 SC-QAM 579000000 y 0x36 256QAM/AnnexA
8 SC-QAM 587000000 y 0x36 256QAM/AnnexA
9 SC-QAM 595000000 y 0x36 256QAM/AnnexA
10 SC-QAM 603000000 y 0x36 256QAM/AnnexA
11 SC-QAM 611000000 y 0x36 256QAM/AnnexA
12 SC-QAM 619000000 y 0x36 256QAM/AnnexA
13 SC-QAM 627000000 y 0x36 256QAM/AnnexA
14 SC-QAM 635000000 y 0x36 256QAM/AnnexA
15 SC-QAM 643000000 y 0x36 256QAM/AnnexA
16 SC-QAM 651000000 y 0x36 256QAM/AnnexA
17 SC-QAM 659000000 y 0x36 256QAM/AnnexA
18 SC-QAM 667000000 y 0x36 256QAM/AnnexA
19 SC-QAM 675000000 y 0x36 256QAM/AnnexA
20 SC-QAM 683000000 y 0x36 256QAM/AnnexA
21 SC-QAM 691000000 y 0x36 256QAM/AnnexA
22 SC-QAM 699000000 y 0x36 256QAM/AnnexA
23 SC-QAM 707000000 y 0x36 256QAM/AnnexA
24 SC-QAM 715000000 y 0x36 256QAM/AnnexA
25 SC-QAM 723000000 y 0x36 256QAM/AnnexA
26 SC-QAM 731000000 y 0x36 256QAM/AnnexA
27 SC-QAM 739000000 y 0x36 256QAM/AnnexA
28 SC-QAM 747000000 y 0x36 256QAM/AnnexA
29 SC-QAM 755000000 y 0x36 256QAM/AnnexA
30 SC-QAM 763000000 y 0x36 256QAM/AnnexA
31 SC-QAM 771000000 y 0x36 256QAM/AnnexA
32 SC-QAM 779000000 y 0x36 256QAM/AnnexA
159 OFDM PLC 897000000 n 0x36 25Khz/5us/0.625us
160 OFDM PLC 361000000 n 0x36 50Khz/0.9375us/0.625us

Trimmed Downstream Ambiguity Resolution Frequency List: list size = 3

531000000-sc_qam 539000000-sc_qam 547000000-sc_qam

visible dcid set = 14

freq with visible dcid set = 635000000

BcmCmDocsisCtlMsgACT::HandleEvent() @time=10824360 event_code=11


(kCmMdDsSgDiscDone)
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=true
[03:00:24 01/01/1970] [CmDocsisCtlThread]
BcmDocsisCmHalIf::SetPrimaryDownstreamChannel: (DOCSIS CableModem HalIf)
Installing primary downstream channel index: 0
SetRatios called with primary downstream channel number = 0
AnnexMode[0] = 1 QAM_Mode[0] = 256
Num/Den = 869/1280
3390 SCDMA/OFDM mode - ChannelNumber = 0 Numerator = 869 Denominator = 1280
CM/DocsisCtl> [03:00:24 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL failed to acquire sync or lost sync!
... TCOFDM - DTR is now locked.... (T2=151ms Sync=14)

Given a 216 MHz TCOFDM clock, the nominal value for the DTR FCW is 0xC22E45067
The DTR FCW is 0xc22e93d1 - that value is good (6, within 100 ppm)
Kicked off the DPLL
LE Done bit was set
LE Done bit was set
SCQAM DS clock source.
PLL in Leaky mode.
PLL Fn = 6, k1 = 18, k2 = 19
[03:00:24 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context=1 (ErrorRecovery)
[03:00:24 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context is error recovery or startup.
Always use last good upstream target chan id=1
[03:00:24 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper) Locked on the downstream. Waiting for UCDs...
[03:00:24 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefFail: (Cm
Multi US Helper) target hwTxId=0
CM/DocsisCtl> [03:00:26 01/01/1970] [CmDocsisCtlThread]
BcmCmMultiUsHelper::TmUcdRxTimerEvent: (Cm Multi US Helper)
ucd gathering ok.

[03:00:26 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper) state at
entry:

Channel targeting:
Downstream:
fTargetDsFreqHz = 0 (0)
fCurrentDsFreqHz = 0x25d954c0 (635000000)
fStoredDsFreqHz = 0x29020c00 (688000000)

Upstream:
fDestSingleTxTargetUsChanId = 0x1 (1)
fTargetingContext = 1 (ErrorRecovery)

Startup UCD Selection Info:

low priority candidate ucid list = 2 3 1 4 5 6 8 7


happy home ucid set = 1 2 3 4

Upstream Active Channel Settings:

ucid rpt enable sel prio MAP source dcid's


---- ---------- -------- -----------------
1 0x1c0 0
2 0x1c0 0
3 0x1c0 0
4 0x1c0 0
5 0x1c0 0
6 0x1c0 0
7 0x1c0 0
8 0x1c0 0
BcmCmUsTargetMset (a.k.a. usable UCDs gathered during startup):

us config
phy change ranging scdma
type ucid dcid count tried? enabled?
---- ---- ---- ------ ------- --------
3 1 14 4 n n
3 2 14 4 n n
3 3 14 4 n n
3 4 14 4 n n
3 5 14 4 n n
3 6 14 4 n n
3 7 14 4 n n
3 8 14 4 n n

[03:00:26 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper)
starting docs3 upstream initialization on target ucid=2
with upstream phy type 3 on hardware transmitter index 0

[03:00:26 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::ExecuteTccCmd: hwTxId=0


docs ucid=0
[03:00:26 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0
[03:00:26 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::InstallUsSets: Installing
UCD w/ucid for UCID=2 for CM hardware tx chan 0

[03:00:26 01/01/1970] [CmDocsisCtlThread]


BcmCmUsSetsState::TestAndLaunchUsTimeSync: starting upstream time sync
acquisition...
[03:00:26 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefOk: (Cm
Multi US Helper) target hwTxId=0
[03:00:26 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::UsTimeRefOk: upstream time
sync acquired for fHwTxId=0

== Beginning initial ranging for Docsis UCID 2 ==


Minimum transmit power is 17 dBmV
Maximum transmit power is 53 dBmV
Stored power level for UCID 2 is 38 dBmV
Using per transmitter stored initial upstream power = 38 dBmV hwTxId = 0 docsis
UCID = 2
RNG-RSP UsChanId=2 Adj: tim=1938 freq=-58 Stat=Continue (CmdPwr (UsChanId-dBmV):
(2-40.50) )
[03:00:27 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0xc9
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (2-
41.00) )
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (2-
41.00) )
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (2-
41.00) )
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (2-
41.00) )
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Success (CmdPwr (UsChanId-dBmV): (2-
41.00) )
[03:00:32 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::FirstRngSuccess:
(CmDocsisCtlThread)
first RNG-RSP w/status==SUCCESS for hwTxId=0 and DOCSIS ucid=2
[03:00:32 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::LaunchEaeBpkm:
(CmDocsisCtlThread) BPKM enabled. starting Early Authentication and Encryption BPKM
key requests. Primary Sid = 201
CM/DocsisCtl> Bandwidth request failure! Status = 0

BcmCmUsChanTimerMuxACT::HandleEvent() @time=11022350 fTimerType=5


(kT4NoStationMaint) hwTxId=0 docs ucid=2
[03:03:42 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::T4NoStationMaintEvent: ERROR - no Station Maint map op error.
hwTxId=0 docs ucid=2
[03:03:42 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::CommonRngErrorHandler: reason=10 (T4NoStationMaintTimeout)
hwTxId=0 docs ucid=2
[03:03:42 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) Purging DS
frequency 635000000 from current scan pass due to pre-registration restart error
[03:03:42 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) reinit MAC #50:
T4NoStationMaintTimeout

[03:03:42 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::Reset:


(CmDocsisCtlThread) DefaultSnmpAgentClass::RestartPendingEvent for Vendor CM
Agent w/ BRCM Factory Support
Logging event: Received Response to Broadcast Maintenance Request, But no Unicast
Maintenance opportunities received - T4 time out;CM-MAC=fc:4a:e9:de:ad:88;CMTS-
MAC=28:52:61:fa:d8:78;CM-QOS=1.1;CM-VER=3.1;
Vendor CM Agent w/ BRCM Factory Support updating ifTableLastChange.
Vendor CM Agent w/ BRCM Factory Support resetting to default state.
Vendor CM Agent w/ BRCM Factory Support destroying users...
Vendor CM Agent w/ BRCM Factory Support destroying notifies...
Vendor CM Agent w/ BRCM Factory Support destroying views...
Allowing DOCS-CABLE-DEVICE-MIB IP filters.
Vendor CM Agent w/ BRCM Factory Support deferring traps.
Received RG Event 0x80000001 State 0x1
eRouter Linux WAN Down
[03:03:42 01/01/1970] [eRouterMsgPipe] eRouterMsgPipe::UpdateIpNetToMediaEntry:
(eRouterMsgPipe) eRouter IP address:0.0.0.0
03:03:42.640 01/01/1970 (CALC) mtaCmStatusInfo() - MTA is Signaled: *NOT-
OPERATIONAL* (Stat=0x1) emtaCurState = 0.
EmtaSnmpAgent::SoftReset
Pausing trap thread
emta factory agentResetting to default state.
emta factory agent destroying users...
emta factory agent destroying notifies...
emta factory agent destroying views...
emta factory agent entering RFC-2576 Coexistence security mode.
emta factory agent entering Basic/Hybrid flow provisioning mode.
Resuming trap thread
Stopping DHCP/ToD/TFTP (client requested)...
[03:03:42 01/01/1970] [CmDocsisIpThread] BcmEcosIpHalIf::RemoveIpv6Address: (IP
Stack1 HalIf) ERROR - Failed to remove IPv6 address fe80::fe4a:e9ff:fede:ad88/64
from the stack!
[03:03:42 01/01/1970] [CmDocsisIpThread] BcmDhcpV6ClientIf::ReleaseAddresses:
(DHCPv6 ClientIf for IP Stack1) ERROR - IA state is initial; there is no address to
release.
BcmDocsis3DsMacEnableMulticastDsidForwarding 0; primary DS = 0
SCQAM DSID filter control = 0x00
OFDM DSID filter control = 0x01
Deleting DOCSIS 1.0 CoS Settings for SID 0xc9
[03:03:43 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows:
(DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along
with associated Classifiers and PHS rules...
[03:03:43 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState:
(CmDocsisCtlThread)
[03:03:43 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Primary SID for usHwChannel 0 to 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 1
Updating US chan 8 data Profile test msg for Sid: 0x0.
Updating US chan 9 data Profile test msg for Sid: 0x0.
CM/DocsisCtl> [03:03:43 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL declared PULSE lost!
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=false
[03:03:43 01/01/1970] [CmDocsisCtlThread] BcmCmMultiDsHelper::PreRegDsChanChange:
target freq hz = 0
reason string = ErrorRecovery
CmInitReason = 16

Starting DS scanning...
[03:03:43 01/01/1970] [CmDocsisCtlThread] BcmCmDownstreamScan::StartScan: Starting
DS scan
Checking for cable cut...

CM/DocsisCtl> Plant power is 15.65

Cable connected

CM/DocsisCtl> Scanning 636.000 MHz SC-QAM (Annex A(Eu.1M))


Scanning 637.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 638.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 639.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 640.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 641.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 642.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 643.000 MHz SC-QAM (Annex A(Eu.1M)) locked SC-QAM
[03:03:47 01/01/1970] [CmDocsisCtlThread] BcmCmDsChan::DsLockOk: (BcmCmDsChan 0)
hwRxId=0 freq=0 dcid=0

******************************************
DOWNSTREAM STATUS
******************************************
HW Channel ID = 0
Phy type: SC-QAM
DS active chan settings:
ds chan id = 0
center freq, Hz = 643000000 Hz
primary capable = false
status event rpt bitmask = 0

CM HW Detected DS Phy Settings:


Center Freq, Hz = 643000000
QAM = Locked
FEC = Locked
Carrier Freq Offset, kHz = 0
Channel Width, Hz = 8000000
Modulation = Qam256
Interleaver = Taps12Incr17
Symbol Rate, sym/sec = 6952000

******************************************

[03:03:47 01/01/1970] [CmDocsisCtlThread]


BcmCmMacDomainSetsState::StartDsMacMddInit:
**********************************************
Waiting for MDDs...
**********************************************

CM/DocsisCtl>
BcmCmDocsisCtlMsgACT::HandleEvent() @time=11027770 event_code=4
(kCmPriDsMddSetsOk)
MDD diplexer band edge not specified.
MDD Plant US Frequency Range = extended.
Requested Spectrum = US:(0 MHz..85 MHz) DS:(0 MHz..0 MHz)
Best Match = 0: US:(5 MHz..85 MHz) DS:(108 MHz..1218 MHz)
Switchable diplexer ECN support disabled. NOT switching diplexer.
[03:03:47 01/01/1970] [CmDocsisCtlThread]
BcmCmMdDsSgDiscState::TrimSgSetWithoutThisDcid:
1 candidate MD-DS-SG remain after TrimSgSetWithoutThisDcid( target_dcid )
for target_dcid=0x0f (15)
[03:03:47 01/01/1970] [CmDocsisCtlThread] BcmCmMdDsSgDiscState::StartMdDsSgDisc:
special case: one and only one MD-DS-SG contains mdd_dcid.
fMdDsSgId=0x1d (29)
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , M-d++a+i-+Ty-eA+dA++e|:
i_L-ca+A++e|A: 1
Chec+ +D_A++e|A
Cha++e+ Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1

MD-DS-SG discovery info:

fCmMdDsSgDiscState = 6 (kMdDsSgDiscDone)
fMdDsSgId = 0x1d (29)
fMdDsSgDiscovered = true

Trimmed Candidate Downstream Service Group Settings List: list size = 1

sgid size member dcid's


---- ---- -------------
29 34 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
27 28 29 30 31 32 159 160

Downstream Active Channel Settings List:

dcid type frequency prim capable rpt enable mod/annex or PLC params
---- -------- --------- ------------ ---------- -----------------------
1 SC-QAM 531000000 y 0x36 256QAM/AnnexA
2 SC-QAM 539000000 y 0x36 256QAM/AnnexA
3 SC-QAM 547000000 y 0x36 256QAM/AnnexA
4 SC-QAM 555000000 y 0x36 256QAM/AnnexA
5 SC-QAM 563000000 y 0x36 256QAM/AnnexA
6 SC-QAM 571000000 y 0x36 256QAM/AnnexA
7 SC-QAM 579000000 y 0x36 256QAM/AnnexA
8 SC-QAM 587000000 y 0x36 256QAM/AnnexA
9 SC-QAM 595000000 y 0x36 256QAM/AnnexA
10 SC-QAM 603000000 y 0x36 256QAM/AnnexA
11 SC-QAM 611000000 y 0x36 256QAM/AnnexA
12 SC-QAM 619000000 y 0x36 256QAM/AnnexA
13 SC-QAM 627000000 y 0x36 256QAM/AnnexA
14 SC-QAM 635000000 y 0x36 256QAM/AnnexA
15 SC-QAM 643000000 y 0x36 256QAM/AnnexA
16 SC-QAM 651000000 y 0x36 256QAM/AnnexA
17 SC-QAM 659000000 y 0x36 256QAM/AnnexA
18 SC-QAM 667000000 y 0x36 256QAM/AnnexA
19 SC-QAM 675000000 y 0x36 256QAM/AnnexA
20 SC-QAM 683000000 y 0x36 256QAM/AnnexA
21 SC-QAM 691000000 y 0x36 256QAM/AnnexA
22 SC-QAM 699000000 y 0x36 256QAM/AnnexA
23 SC-QAM 707000000 y 0x36 256QAM/AnnexA
24 SC-QAM 715000000 y 0x36 256QAM/AnnexA
25 SC-QAM 723000000 y 0x36 256QAM/AnnexA
26 SC-QAM 731000000 y 0x36 256QAM/AnnexA
27 SC-QAM 739000000 y 0x36 256QAM/AnnexA
28 SC-QAM 747000000 y 0x36 256QAM/AnnexA
29 SC-QAM 755000000 y 0x36 256QAM/AnnexA
30 SC-QAM 763000000 y 0x36 256QAM/AnnexA
31 SC-QAM 771000000 y 0x36 256QAM/AnnexA
32 SC-QAM 779000000 y 0x36 256QAM/AnnexA
159 OFDM PLC 897000000 n 0x36 25Khz/5us/0.625us
160 OFDM PLC 361000000 n 0x36 50Khz/0.9375us/0.625us

Trimmed Downstream Ambiguity Resolution Frequency List: list size = 3

531000000-sc_qam 539000000-sc_qam 547000000-sc_qam

visible dcid set = 15

freq with visible dcid set = 643000000

BcmCmDocsisCtlMsgACT::HandleEvent() @time=11028360 event_code=11


(kCmMdDsSgDiscDone)
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=true
[03:03:48 01/01/1970] [CmDocsisCtlThread]
BcmDocsisCmHalIf::SetPrimaryDownstreamChannel: (DOCSIS CableModem HalIf)
Installing primary downstream channel index: 0
SetRatios called with primary downstream channel number = 0
AnnexMode[0] = 1 QAM_Mode[0] = 256
Num/Den = 869/1280
3390 SCDMA/OFDM mode - ChannelNumber = 0 Numerator = 869 Denominator = 1280
CM/DocsisCtl> [03:03:48 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL failed to acquire sync or lost sync!
... TCOFDM - DTR is now locked.... (T2=150ms Sync=14)

Given a 216 MHz TCOFDM clock, the nominal value for the DTR FCW is 0xC22E45067
The DTR FCW is 0xc22ebe83 - that value is good (9, within 100 ppm)
Kicked off the DPLL
LE Done bit was set
LE Done bit was set
SCQAM DS clock source.
PLL in Leaky mode.
PLL Fn = 6, k1 = 18, k2 = 19
[03:03:48 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context=1 (ErrorRecovery)
[03:03:48 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context is error recovery or startup.
Always use last good upstream target chan id=1
[03:03:48 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper) Locked on the downstream. Waiting for UCDs...
[03:03:48 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefFail: (Cm
Multi US Helper) target hwTxId=0
CM/DocsisCtl> [03:03:50 01/01/1970] [CmDocsisCtlThread]
BcmCmMultiUsHelper::TmUcdRxTimerEvent: (Cm Multi US Helper)
ucd gathering ok.
[03:03:50 01/01/1970] [CmDocsisCtlThread]
BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper) state at
entry:

Channel targeting:
Downstream:
fTargetDsFreqHz = 0 (0)
fCurrentDsFreqHz = 0x265366c0 (643000000)
fStoredDsFreqHz = 0x29020c00 (688000000)

Upstream:
fDestSingleTxTargetUsChanId = 0x1 (1)
fTargetingContext = 1 (ErrorRecovery)

Startup UCD Selection Info:

low priority candidate ucid list = 1 2 3 4 6 7 5 8


happy home ucid set = 1 2 3 4

Upstream Active Channel Settings:

ucid rpt enable sel prio MAP source dcid's


---- ---------- -------- -----------------
1 0x1c0 0
2 0x1c0 0
3 0x1c0 0
4 0x1c0 0
5 0x1c0 0
6 0x1c0 0
7 0x1c0 0
8 0x1c0 0

BcmCmUsTargetMset (a.k.a. usable UCDs gathered during startup):

us config
phy change ranging scdma
type ucid dcid count tried? enabled?
---- ---- ---- ------ ------- --------
3 1 15 4 n n
3 2 15 4 n n
3 3 15 4 n n
3 4 15 4 n n
3 5 15 4 n n
3 6 15 4 n n
3 7 15 4 n n
3 8 15 4 n n

[03:03:50 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper)
starting docs3 upstream initialization on target ucid=1
with upstream phy type 3 on hardware transmitter index 0

[03:03:50 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::ExecuteTccCmd: hwTxId=0


docs ucid=0
[03:03:50 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0
[03:03:50 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::InstallUsSets: Installing
UCD w/ucid for UCID=1 for CM hardware tx chan 0

[03:03:50 01/01/1970] [CmDocsisCtlThread]


BcmCmUsSetsState::TestAndLaunchUsTimeSync: starting upstream time sync
acquisition...
[03:03:50 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefOk: (Cm
Multi US Helper) target hwTxId=0
[03:03:50 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::UsTimeRefOk: upstream time
sync acquired for fHwTxId=0

== Beginning initial ranging for Docsis UCID 1 ==


Minimum transmit power is 17 dBmV
Maximum transmit power is 53 dBmV
Stored power level for UCID 1 is 39 dBmV
Using per transmitter stored initial upstream power = 39 dBmV hwTxId = 0 docsis
UCID = 1
RNG-RSP UsChanId=1 Adj: tim=1964 freq=-36 Stat=Continue (CmdPwr (UsChanId-dBmV):
(1-41.25) )
[03:03:51 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0xc9
RNG-RSP UsChanId=1 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (1-
41.25) )
RNG-RSP UsChanId=1 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (1-
41.25) )
RNG-RSP UsChanId=1 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (1-
41.25) )
RNG-RSP UsChanId=1 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (1-
41.25) )
RNG-RSP UsChanId=1 Adj: tim=0 freq=0 Stat=Success (CmdPwr (UsChanId-dBmV): (1-
41.25) )
[03:03:57 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::FirstRngSuccess:
(CmDocsisCtlThread)
first RNG-RSP w/status==SUCCESS for hwTxId=0 and DOCSIS ucid=1
[03:03:57 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::LaunchEaeBpkm:
(CmDocsisCtlThread) BPKM enabled. starting Early Authentication and Encryption BPKM
key requests. Primary Sid = 201
CM/DocsisCtl> Bandwidth request failure! Status = 0

BcmCmUsChanTimerMuxACT::HandleEvent() @time=11226630 fTimerType=5


(kT4NoStationMaint) hwTxId=0 docs ucid=1
[03:07:06 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::T4NoStationMaintEvent: ERROR - no Station Maint map op error.
hwTxId=0 docs ucid=1
[03:07:06 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::CommonRngErrorHandler: reason=10 (T4NoStationMaintTimeout)
hwTxId=0 docs ucid=1
[03:07:06 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) Purging DS
frequency 643000000 from current scan pass due to pre-registration restart error
[03:07:06 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) reinit MAC #51:
T4NoStationMaintTimeout

[03:07:06 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::Reset:


(CmDocsisCtlThread) DefaultSnmpAgentClass::RestartPendingEvent for Vendor CM
Agent w/ BRCM Factory Support
Logging event: Received Response to Broadcast Maintenance Request, But no Unicast
Maintenance opportunities received - T4 time out;CM-MAC=fc:4a:e9:de:ad:88;CMTS-
MAC=28:52:61:fa:d8:78;CM-QOS=1.1;CM-VER=3.1;
Vendor CM Agent w/ BRCM Factory Support updating ifTableLastChange.
Vendor CM Agent w/ BRCM Factory Support resetting to default state.
Vendor CM Agent w/ BRCM Factory Support destroying users...
Vendor CM Agent w/ BRCM Factory Support destroying notifies...
Vendor CM Agent w/ BRCM Factory Support destroying views...
Allowing DOCS-CABLE-DEVICE-MIB IP filters.
Vendor CM Agent w/ BRCM Factory Support deferring traps.
CM/DocsisCtl> Received RG Event 0x80000001 State 0x1
eRouter Linux WAN Down
[03:07:06 01/01/1970] [eRouterMsgPipe] eRouterMsgPipe::UpdateIpNetToMediaEntry:
(eRouterMsgPipe) eRouter IP address:0.0.0.0
03:07:06.920 01/01/1970 (CALC) mtaCmStatusInfo() - MTA is Signaled: *NOT-
OPERATIONAL* (Stat=0x1) emtaCurState = 0.
EmtaSnmpAgent::SoftReset
Pausing trap thread
emta factory agentResetting to default state.
emta factory agent destroying users...
emta factory agent destroying notifies...
emta factory agent destroying views...
emta factory agent entering RFC-2576 Coexistence security mode.
emta factory agent entering Basic/Hybrid flow provisioning mode.
Resuming trap thread
Stopping DHCP/ToD/TFTP (client requested)...
[03:07:06 01/01/1970] [CmDocsisIpThread] BcmEcosIpHalIf::RemoveIpv6Address: (IP
Stack1 HalIf) ERROR - Failed to remove IPv6 address fe80::fe4a:e9ff:fede:ad88/64
from the stack!
[03:07:07 01/01/1970] [CmDocsisIpThread] BcmDhcpV6ClientIf::ReleaseAddresses:
(DHCPv6 ClientIf for IP Stack1) ERROR - IA state is initial; there is no address to
release.
BcmDocsis3DsMacEnableMulticastDsidForwarding 0; primary DS = 0
SCQAM DSID filter control = 0x00
OFDM DSID filter control = 0x01
CM/DocsisCtl> Deleting DOCSIS 1.0 CoS Settings for SID 0xc9
[03:07:07 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows:
(DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along
with associated Classifiers and PHS rules...
[03:07:07 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState:
(CmDocsisCtlThread)
[03:07:07 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Primary SID for usHwChannel 0 to 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 1
Updating US chan 8 data Profile test msg for Sid: 0x0.
Updating US chan 9 data Profile test msg for Sid: 0x0.
CM/DocsisCtl> [03:07:08 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL declared PULSE lost!
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=false
[03:07:08 01/01/1970] [CmDocsisCtlThread] BcmCmMultiDsHelper::PreRegDsChanChange:
target freq hz = 0
reason string = ErrorRecovery
CmInitReason = 16

Starting DS scanning...
[03:07:08 01/01/1970] [CmDocsisCtlThread] BcmCmDownstreamScan::StartScan: Starting
DS scan
Checking for cable cut...

CM/DocsisCtl> Plant power is 15.65

Cable connected

Scanning 644.000 MHz SC-QAM (Annex A(Eu.1M))


CM/DocsisCtl> Scanning 645.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 646.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 647.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 648.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 649.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 650.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 651.000 MHz SC-QAM (Annex A(Eu.1M)) locked SC-QAM
[03:07:11 01/01/1970] [CmDocsisCtlThread] BcmCmDsChan::DsLockOk: (BcmCmDsChan 0)
hwRxId=0 freq=0 dcid=0

******************************************
DOWNSTREAM STATUS
******************************************
HW Channel ID = 0
Phy type: SC-QAM
DS active chan settings:
ds chan id = 0
center freq, Hz = 651000000 Hz
primary capable = false
status event rpt bitmask = 0

CM HW Detected DS Phy Settings:


Center Freq, Hz = 651000000
QAM = Locked
FEC = Locked
Carrier Freq Offset, kHz = 0
Channel Width, Hz = 8000000
Modulation = Qam256
Interleaver = Taps12Incr17
Symbol Rate, sym/sec = 6952000

******************************************

[03:07:11 01/01/1970] [CmDocsisCtlThread]


BcmCmMacDomainSetsState::StartDsMacMddInit:
**********************************************
Waiting for MDDs...
**********************************************

CM/DocsisCtl>
BcmCmDocsisCtlMsgACT::HandleEvent() @time=11231770 event_code=4
(kCmPriDsMddSetsOk)
MDD diplexer band edge not specified.
MDD Plant US Frequency Range = extended.
Requested Spectrum = US:(0 MHz..85 MHz) DS:(0 MHz..0 MHz)
Best Match = 0: US:(5 MHz..85 MHz) DS:(108 MHz..1218 MHz)
Switchable diplexer ECN support disabled. NOT switching diplexer.
[03:07:11 01/01/1970] [CmDocsisCtlThread]
BcmCmMdDsSgDiscState::TrimSgSetWithoutThisDcid:
1 candidate MD-DS-SG remain after TrimSgSetWithoutThisDcid( target_dcid )
for target_dcid=0x10 (16)
[03:07:11 01/01/1970] [CmDocsisCtlThread] BcmCmMdDsSgDiscState::StartMdDsSgDisc:
special case: one and only one MD-DS-SG contains mdd_dcid.
fMdDsSgId=0x1d (29)
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , M-d++a+i-+Ty-eA+dA++e|:
i_L-ca+A++e|A: 1
Chec+ +D_A++e|A
Cha++e+ Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1

MD-DS-SG discovery info:

fCmMdDsSgDiscState = 6 (kMdDsSgDiscDone)
fMdDsSgId = 0x1d (29)
fMdDsSgDiscovered = true

Trimmed Candidate Downstream Service Group Settings List: list size = 1


sgid size member dcid's
---- ---- -------------
29 34 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
27 28 29 30 31 32 159 160

Downstream Active Channel Settings List:

dcid type frequency prim capable rpt enable mod/annex or PLC params
---- -------- --------- ------------ ---------- -----------------------
1 SC-QAM 531000000 y 0x36 256QAM/AnnexA
2 SC-QAM 539000000 y 0x36 256QAM/AnnexA
3 SC-QAM 547000000 y 0x36 256QAM/AnnexA
4 SC-QAM 555000000 y 0x36 256QAM/AnnexA
5 SC-QAM 563000000 y 0x36 256QAM/AnnexA
6 SC-QAM 571000000 y 0x36 256QAM/AnnexA
7 SC-QAM 579000000 y 0x36 256QAM/AnnexA
8 SC-QAM 587000000 y 0x36 256QAM/AnnexA
9 SC-QAM 595000000 y 0x36 256QAM/AnnexA
10 SC-QAM 603000000 y 0x36 256QAM/AnnexA
11 SC-QAM 611000000 y 0x36 256QAM/AnnexA
12 SC-QAM 619000000 y 0x36 256QAM/AnnexA
13 SC-QAM 627000000 y 0x36 256QAM/AnnexA
14 SC-QAM 635000000 y 0x36 256QAM/AnnexA
15 SC-QAM 643000000 y 0x36 256QAM/AnnexA
16 SC-QAM 651000000 y 0x36 256QAM/AnnexA
17 SC-QAM 659000000 y 0x36 256QAM/AnnexA
18 SC-QAM 667000000 y 0x36 256QAM/AnnexA
19 SC-QAM 675000000 y 0x36 256QAM/AnnexA
20 SC-QAM 683000000 y 0x36 256QAM/AnnexA
21 SC-QAM 691000000 y 0x36 256QAM/AnnexA
22 SC-QAM 699000000 y 0x36 256QAM/AnnexA
23 SC-QAM 707000000 y 0x36 256QAM/AnnexA
24 SC-QAM 715000000 y 0x36 256QAM/AnnexA
25 SC-QAM 723000000 y 0x36 256QAM/AnnexA
26 SC-QAM 731000000 y 0x36 256QAM/AnnexA
27 SC-QAM 739000000 y 0x36 256QAM/AnnexA
28 SC-QAM 747000000 y 0x36 256QAM/AnnexA
29 SC-QAM 755000000 y 0x36 256QAM/AnnexA
30 SC-QAM 763000000 y 0x36 256QAM/AnnexA
31 SC-QAM 771000000 y 0x36 256QAM/AnnexA
32 SC-QAM 779000000 y 0x36 256QAM/AnnexA
159 OFDM PLC 897000000 n 0x36 25Khz/5us/0.625us
160 OFDM PLC 361000000 n 0x36 50Khz/0.9375us/0.625us

Trimmed Downstream Ambiguity Resolution Frequency List: list size = 3

531000000-sc_qam 539000000-sc_qam 547000000-sc_qam

visible dcid set = 16

freq with visible dcid set = 651000000

BcmCmDocsisCtlMsgACT::HandleEvent() @time=11232360 event_code=11


(kCmMdDsSgDiscDone)
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=true
[03:07:12 01/01/1970] [CmDocsisCtlThread]
BcmDocsisCmHalIf::SetPrimaryDownstreamChannel: (DOCSIS CableModem HalIf)
Installing primary downstream channel index: 0
SetRatios called with primary downstream channel number = 0
AnnexMode[0] = 1 QAM_Mode[0] = 256
Num/Den = 869/1280
3390 SCDMA/OFDM mode - ChannelNumber = 0 Numerator = 869 Denominator = 1280
CM/DocsisCtl> [03:07:12 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL failed to acquire sync or lost sync!
... TCOFDM - DTR is now locked.... (T2=150ms Sync=14)

Given a 216 MHz TCOFDM clock, the nominal value for the DTR FCW is 0xC22E45067
The DTR FCW is 0xc22e90c8 - that value is good (5, within 100 ppm)
Kicked off the DPLL
LE Done bit was set
LE Done bit was set
SCQAM DS clock source.
PLL in Leaky mode.
PLL Fn = 6, k1 = 18, k2 = 19
[03:07:12 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context=1 (ErrorRecovery)
[03:07:12 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context is error recovery or startup.
Always use last good upstream target chan id=1
[03:07:12 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper) Locked on the downstream. Waiting for UCDs...
[03:07:12 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefFail: (Cm
Multi US Helper) target hwTxId=0
CM/DocsisCtl> [03:07:14 01/01/1970] [CmDocsisCtlThread]
BcmCmMultiUsHelper::TmUcdRxTimerEvent: (Cm Multi US Helper)
ucd gathering ok.

[03:07:14 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper) state at
entry:

Channel targeting:
Downstream:
fTargetDsFreqHz = 0 (0)
fCurrentDsFreqHz = 0x26cd78c0 (651000000)
fStoredDsFreqHz = 0x29020c00 (688000000)

Upstream:
fDestSingleTxTargetUsChanId = 0x1 (1)
fTargetingContext = 1 (ErrorRecovery)

Startup UCD Selection Info:

low priority candidate ucid list = 3 2 1 4 6 5 7 8


happy home ucid set = 1 2 3 4

Upstream Active Channel Settings:

ucid rpt enable sel prio MAP source dcid's


---- ---------- -------- -----------------
1 0x1c0 0
2 0x1c0 0
3 0x1c0 0
4 0x1c0 0
5 0x1c0 0
6 0x1c0 0
7 0x1c0 0
8 0x1c0 0

BcmCmUsTargetMset (a.k.a. usable UCDs gathered during startup):

us config
phy change ranging scdma
type ucid dcid count tried? enabled?
---- ---- ---- ------ ------- --------
3 1 16 4 n n
3 2 16 4 n n
3 3 16 4 n n
3 4 16 4 n n
3 5 16 4 n n
3 6 16 4 n n
3 7 16 4 n n
3 8 16 4 n n

[03:07:14 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper)
starting docs3 upstream initialization on target ucid=3
with upstream phy type 3 on hardware transmitter index 0

[03:07:14 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::ExecuteTccCmd: hwTxId=0


docs ucid=0
[03:07:14 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0
[03:07:14 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::InstallUsSets: Installing
UCD w/ucid for UCID=3 for CM hardware tx chan 0

[03:07:14 01/01/1970] [CmDocsisCtlThread]


BcmCmUsSetsState::TestAndLaunchUsTimeSync: starting upstream time sync
acquisition...
[03:07:14 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefOk: (Cm
Multi US Helper) target hwTxId=0
[03:07:14 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::UsTimeRefOk: upstream time
sync acquired for fHwTxId=0

== Beginning initial ranging for Docsis UCID 3 ==


Minimum transmit power is 17 dBmV
Maximum transmit power is 53 dBmV
Stored power level for UCID 3 is 38 dBmV
Using per transmitter stored initial upstream power = 38 dBmV hwTxId = 0 docsis
UCID = 3
RNG-RSP UsChanId=3 Adj: tim=1961 freq=-17 Stat=Continue (CmdPwr (UsChanId-dBmV):
(3-40.75) )
[03:07:15 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0xc9
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (3-
41.25) )
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (3-
41.25) )
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (3-
41.25) )
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (3-
41.25) )
RNG-RSP UsChanId=3 Adj: tim=0 freq=0 Stat=Success (CmdPwr (UsChanId-dBmV): (3-
41.25) )
[03:07:20 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::FirstRngSuccess:
(CmDocsisCtlThread)
first RNG-RSP w/status==SUCCESS for hwTxId=0 and DOCSIS ucid=3
[03:07:20 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::LaunchEaeBpkm:
(CmDocsisCtlThread) BPKM enabled. starting Early Authentication and Encryption BPKM
key requests. Primary Sid = 201
CM/DocsisCtl> Bandwidth request failure! Status = 0

BcmCmUsChanTimerMuxACT::HandleEvent() @time=11429910 fTimerType=5


(kT4NoStationMaint) hwTxId=0 docs ucid=3
[03:10:29 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::T4NoStationMaintEvent: ERROR - no Station Maint map op error.
hwTxId=0 docs ucid=3
[03:10:29 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::CommonRngErrorHandler: reason=10 (T4NoStationMaintTimeout)
hwTxId=0 docs ucid=3
[03:10:29 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) Purging DS
frequency 651000000 from current scan pass due to pre-registration restart error
[03:10:29 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) reinit MAC #52:
T4NoStationMaintTimeout

[03:10:29 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::Reset:


(CmDocsisCtlThread) DefaultSnmpAgentClass::RestartPendingEvent for Vendor CM
Agent w/ BRCM Factory Support
Logging event: Received Response to Broadcast Maintenance Request, But no Unicast
Maintenance opportunities received - T4 time out;CM-MAC=fc:4a:e9:de:ad:88;CMTS-
MAC=28:52:61:fa:d8:78;CM-QOS=1.1;CM-VER=3.1;
Vendor CM Agent w/ BRCM Factory Support updating ifTableLastChange.
Vendor CM Agent w/ BRCM Factory Support resetting to default state.
Vendor CM Agent w/ BRCM Factory Support destroying users...
Vendor CM Agent w/ BRCM Factory Support destroying notifies...
Vendor CM Agent w/ BRCM Factory Support destroying views...
Allowing DOCS-CABLE-DEVICE-MIB IP filters.
Vendor CM Agent w/ BRCM Factory Support deferring traps.
Received RG Event 0x80000001 State 0x1
eRouter Linux WAN Down
[03:10:30 01/01/1970] [eRouterMsgPipe] eRouterMsgPipe::UpdateIpNetToMediaEntry:
(eRouterMsgPipe) eRouter IP address:0.0.0.0
03:10:30.200 01/01/1970 (CALC) mtaCmStatusInfo() - MTA is Signaled: *NOT-
OPERATIONAL* (Stat=0x1) emtaCurState = 0.
EmtaSnmpAgent::SoftReset
Pausing trap thread
emta factory agentResetting to default state.
emta factory agent destroying users...
emta factory agent destroying notifies...
emta factory agent destroying views...
emta factory agent entering RFC-2576 Coexistence security mode.
emta factory agent entering Basic/Hybrid flow provisioning mode.
Resuming trap thread
Stopping DHCP/ToD/TFTP (client requested)...
[03:10:30 01/01/1970] [CmDocsisIpThread] BcmEcosIpHalIf::RemoveIpv6Address: (IP
Stack1 HalIf) ERROR - Failed to remove IPv6 address fe80::fe4a:e9ff:fede:ad88/64
from the stack!
[03:10:30 01/01/1970] [CmDocsisIpThread] BcmDhcpV6ClientIf::ReleaseAddresses:
(DHCPv6 ClientIf for IP Stack1) ERROR - IA state is initial; there is no address to
release.
BcmDocsis3DsMacEnableMulticastDsidForwarding 0; primary DS = 0
SCQAM DSID filter control = 0x00
OFDM DSID filter control = 0x01
CM/DocsisCtl> Deleting DOCSIS 1.0 CoS Settings for SID 0xc9
[03:10:30 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows:
(DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along
with associated Classifiers and PHS rules...
[03:10:30 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState:
(CmDocsisCtlThread)
[03:10:30 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Primary SID for usHwChannel 0 to 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 1
Updating US chan 8 data Profile test msg for Sid: 0x0.
Updating US chan 9 data Profile test msg for Sid: 0x0.
CM/DocsisCtl> [03:10:31 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL declared PULSE lost!
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=false
[03:10:31 01/01/1970] [CmDocsisCtlThread] BcmCmMultiDsHelper::PreRegDsChanChange:
target freq hz = 0
reason string = ErrorRecovery
CmInitReason = 16

Starting DS scanning...
[03:10:31 01/01/1970] [CmDocsisCtlThread] BcmCmDownstreamScan::StartScan: Starting
DS scan
Checking for cable cut...

CM/DocsisCtl> Plant power is 15.65

Cable connected

CM/DocsisCtl> Scanning 652.000 MHz SC-QAM (Annex A(Eu.1M))


Scanning 653.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 654.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 655.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 656.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 657.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 658.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 659.000 MHz SC-QAM (Annex A(Eu.1M)) locked SC-QAM
[03:10:34 01/01/1970] [CmDocsisCtlThread] BcmCmDsChan::DsLockOk: (BcmCmDsChan 0)
hwRxId=0 freq=0 dcid=0

******************************************
DOWNSTREAM STATUS
******************************************
HW Channel ID = 0
Phy type: SC-QAM
DS active chan settings:
ds chan id = 0
center freq, Hz = 659000000 Hz
primary capable = false
status event rpt bitmask = 0

CM HW Detected DS Phy Settings:


Center Freq, Hz = 659000000
QAM = Locked
FEC = Locked
Carrier Freq Offset, kHz = 0
Channel Width, Hz = 8000000
Modulation = Qam256
Interleaver = Taps12Incr17
Symbol Rate, sym/sec = 6952000

******************************************

[03:10:34 01/01/1970] [CmDocsisCtlThread]


BcmCmMacDomainSetsState::StartDsMacMddInit:
**********************************************
Waiting for MDDs...
**********************************************

CM/DocsisCtl>
BcmCmDocsisCtlMsgACT::HandleEvent() @time=11435770 event_code=4
(kCmPriDsMddSetsOk)
MDD diplexer band edge not specified.
MDD Plant US Frequency Range = extended.
Requested Spectrum = US:(0 MHz..85 MHz) DS:(0 MHz..0 MHz)
Best Match = 0: US:(5 MHz..85 MHz) DS:(108 MHz..1218 MHz)
Switchable diplexer ECN support disabled. NOT switching diplexer.
[03:10:35 01/01/1970] [CmDocsisCtlThread]
BcmCmMdDsSgDiscState::TrimSgSetWithoutThisDcid:
1 candidate MD-DS-SG remain after TrimSgSetWithoutThisDcid( target_dcid )
for target_dcid=0x11 (17)
[03:10:35 01/01/1970] [CmDocsisCtlThread] BcmCmMdDsSgDiscState::StartMdDsSgDisc:
special case: one and only one MD-DS-SG contains mdd_dcid.
fMdDsSgId=0x1d (29)
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , M-d++a+i-+Ty-eA+dA++e|:
i_L-ca+A++e|A: 1
Chec+ +D_A++e|A
Cha++e+ Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1

MD-DS-SG discovery info:

fCmMdDsSgDiscState = 6 (kMdDsSgDiscDone)
fMdDsSgId = 0x1d (29)
fMdDsSgDiscovered = true

Trimmed Candidate Downstream Service Group Settings List: list size = 1

sgid size member dcid's


---- ---- -------------
29 34 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
27 28 29 30 31 32 159 160

Downstream Active Channel Settings List:

dcid type frequency prim capable rpt enable mod/annex or PLC params
---- -------- --------- ------------ ---------- -----------------------
1 SC-QAM 531000000 y 0x36 256QAM/AnnexA
2 SC-QAM 539000000 y 0x36 256QAM/AnnexA
3 SC-QAM 547000000 y 0x36 256QAM/AnnexA
4 SC-QAM 555000000 y 0x36 256QAM/AnnexA
5 SC-QAM 563000000 y 0x36 256QAM/AnnexA
6 SC-QAM 571000000 y 0x36 256QAM/AnnexA
7 SC-QAM 579000000 y 0x36 256QAM/AnnexA
8 SC-QAM 587000000 y 0x36 256QAM/AnnexA
9 SC-QAM 595000000 y 0x36 256QAM/AnnexA
10 SC-QAM 603000000 y 0x36 256QAM/AnnexA
11 SC-QAM 611000000 y 0x36 256QAM/AnnexA
12 SC-QAM 619000000 y 0x36 256QAM/AnnexA
13 SC-QAM 627000000 y 0x36 256QAM/AnnexA
14 SC-QAM 635000000 y 0x36 256QAM/AnnexA
15 SC-QAM 643000000 y 0x36 256QAM/AnnexA
16 SC-QAM 651000000 y 0x36 256QAM/AnnexA
17 SC-QAM 659000000 y 0x36 256QAM/AnnexA
18 SC-QAM 667000000 y 0x36 256QAM/AnnexA
19 SC-QAM 675000000 y 0x36 256QAM/AnnexA
20 SC-QAM 683000000 y 0x36 256QAM/AnnexA
21 SC-QAM 691000000 y 0x36 256QAM/AnnexA
22 SC-QAM 699000000 y 0x36 256QAM/AnnexA
23 SC-QAM 707000000 y 0x36 256QAM/AnnexA
24 SC-QAM 715000000 y 0x36 256QAM/AnnexA
25 SC-QAM 723000000 y 0x36 256QAM/AnnexA
26 SC-QAM 731000000 y 0x36 256QAM/AnnexA
27 SC-QAM 739000000 y 0x36 256QAM/AnnexA
28 SC-QAM 747000000 y 0x36 256QAM/AnnexA
29 SC-QAM 755000000 y 0x36 256QAM/AnnexA
30 SC-QAM 763000000 y 0x36 256QAM/AnnexA
31 SC-QAM 771000000 y 0x36 256QAM/AnnexA
32 SC-QAM 779000000 y 0x36 256QAM/AnnexA
159 OFDM PLC 897000000 n 0x36 25Khz/5us/0.625us
160 OFDM PLC 361000000 n 0x36 50Khz/0.9375us/0.625us

Trimmed Downstream Ambiguity Resolution Frequency List: list size = 3

531000000-sc_qam 539000000-sc_qam 547000000-sc_qam

visible dcid set = 17

freq with visible dcid set = 659000000

BcmCmDocsisCtlMsgACT::HandleEvent() @time=11436360 event_code=11


(kCmMdDsSgDiscDone)
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=true
[03:10:36 01/01/1970] [CmDocsisCtlThread]
BcmDocsisCmHalIf::SetPrimaryDownstreamChannel: (DOCSIS CableModem HalIf)
Installing primary downstream channel index: 0
SetRatios called with primary downstream channel number = 0
AnnexMode[0] = 1 QAM_Mode[0] = 256
Num/Den = 869/1280
3390 SCDMA/OFDM mode - ChannelNumber = 0 Numerator = 869 Denominator = 1280
CM/DocsisCtl> [03:10:36 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL failed to acquire sync or lost sync!
... TCOFDM - DTR is now locked.... (T2=150ms Sync=14)

Given a 216 MHz TCOFDM clock, the nominal value for the DTR FCW is 0xC22E45067
The DTR FCW is 0xc22e9551 - that value is good (6, within 100 ppm)
Kicked off the DPLL
LE Done bit was set
LE Done bit was set
SCQAM DS clock source.
PLL in Leaky mode.
PLL Fn = 6, k1 = 18, k2 = 19
[03:10:36 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context=1 (ErrorRecovery)
[03:10:36 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context is error recovery or startup.
Always use last good upstream target chan id=1
[03:10:36 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper) Locked on the downstream. Waiting for UCDs...
[03:10:36 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefFail: (Cm
Multi US Helper) target hwTxId=0
CM/DocsisCtl> [03:10:38 01/01/1970] [CmDocsisCtlThread]
BcmCmMultiUsHelper::TmUcdRxTimerEvent: (Cm Multi US Helper)
ucd gathering ok.

[03:10:38 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper) state at
entry:

Channel targeting:
Downstream:
fTargetDsFreqHz = 0 (0)
fCurrentDsFreqHz = 0x27478ac0 (659000000)
fStoredDsFreqHz = 0x29020c00 (688000000)

Upstream:
fDestSingleTxTargetUsChanId = 0x1 (1)
fTargetingContext = 1 (ErrorRecovery)

Startup UCD Selection Info:

low priority candidate ucid list = 1 4 2 3 8 5 7 6


happy home ucid set = 1 2 3 4

Upstream Active Channel Settings:

ucid rpt enable sel prio MAP source dcid's


---- ---------- -------- -----------------
1 0x1c0 0
2 0x1c0 0
3 0x1c0 0
4 0x1c0 0
5 0x1c0 0
6 0x1c0 0
7 0x1c0 0
8 0x1c0 0

BcmCmUsTargetMset (a.k.a. usable UCDs gathered during startup):

us config
phy change ranging scdma
type ucid dcid count tried? enabled?
---- ---- ---- ------ ------- --------
3 1 17 4 n n
3 2 17 4 n n
3 3 17 4 n n
3 4 17 4 n n
3 5 17 4 n n
3 6 17 4 n n
3 7 17 4 n n
3 8 17 4 n n

[03:10:38 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper)
starting docs3 upstream initialization on target ucid=1
with upstream phy type 3 on hardware transmitter index 0

[03:10:38 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::ExecuteTccCmd: hwTxId=0


docs ucid=0
[03:10:38 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0
[03:10:38 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::InstallUsSets: Installing
UCD w/ucid for UCID=1 for CM hardware tx chan 0

[03:10:38 01/01/1970] [CmDocsisCtlThread]


BcmCmUsSetsState::TestAndLaunchUsTimeSync: starting upstream time sync
acquisition...
[03:10:38 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefOk: (Cm
Multi US Helper) target hwTxId=0
[03:10:38 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::UsTimeRefOk: upstream time
sync acquired for fHwTxId=0

== Beginning initial ranging for Docsis UCID 1 ==


Minimum transmit power is 17 dBmV
Maximum transmit power is 53 dBmV
Stored power level for UCID 1 is 39 dBmV
Using per transmitter stored initial upstream power = 39 dBmV hwTxId = 0 docsis
UCID = 1
RNG-RSP UsChanId=1 Adj: tim=1870 freq=-73 Stat=Continue (CmdPwr (UsChanId-dBmV):
(1-40.75) )
[03:10:39 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0xc9
RNG-RSP UsChanId=1 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (1-
41.25) )
RNG-RSP UsChanId=1 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (1-
41.25) )
RNG-RSP UsChanId=1 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (1-
41.25) )
RNG-RSP UsChanId=1 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (1-
41.25) )
RNG-RSP UsChanId=1 Adj: tim=0 freq=0 Stat=Success (CmdPwr (UsChanId-dBmV): (1-
41.25) )
[03:10:44 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::FirstRngSuccess:
(CmDocsisCtlThread)
first RNG-RSP w/status==SUCCESS for hwTxId=0 and DOCSIS ucid=1
[03:10:44 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::LaunchEaeBpkm:
(CmDocsisCtlThread) BPKM enabled. starting Early Authentication and Encryption BPKM
key requests. Primary Sid = 201
CM/DocsisCtl> Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0

BcmCmUsChanTimerMuxACT::HandleEvent() @time=11634450 fTimerType=5


(kT4NoStationMaint) hwTxId=0 docs ucid=1
[03:13:54 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::T4NoStationMaintEvent: ERROR - no Station Maint map op error.
hwTxId=0 docs ucid=1
[03:13:54 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::CommonRngErrorHandler: reason=10 (T4NoStationMaintTimeout)
hwTxId=0 docs ucid=1
[03:13:54 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) Purging DS
frequency 659000000 from current scan pass due to pre-registration restart error
[03:13:54 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) reinit MAC #53:
T4NoStationMaintTimeout

[03:13:54 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::Reset:


(CmDocsisCtlThread) DefaultSnmpAgentClass::RestartPendingEvent for Vendor CM
Agent w/ BRCM Factory Support
Logging event: Received Response to Broadcast Maintenance Request, But no Unicast
Maintenance opportunities received - T4 time out;CM-MAC=fc:4a:e9:de:ad:88;CMTS-
MAC=28:52:61:fa:d8:78;CM-QOS=1.1;CM-VER=3.1;
Vendor CM Agent w/ BRCM Factory Support updating ifTableLastChange.
Vendor CM Agent w/ BRCM Factory Support resetting to default state.
Vendor CM Agent w/ BRCM Factory Support destroying users...
Vendor CM Agent w/ BRCM Factory Support destroying notifies...
Vendor CM Agent w/ BRCM Factory Support destroying views...
Allowing DOCS-CABLE-DEVICE-MIB IP filters.
Vendor CM Agent w/ BRCM Factory Support deferring traps.
Received RG Event 0x80000001 State 0x1
eRouter Linux WAN Down
[03:13:54 01/01/1970] [eRouterMsgPipe] eRouterMsgPipe::UpdateIpNetToMediaEntry:
(eRouterMsgPipe) eRouter IP address:0.0.0.0
03:13:54.740 01/01/1970 (CALC) mtaCmStatusInfo() - MTA is Signaled: *NOT-
OPERATIONAL* (Stat=0x1) emtaCurState = 0.
EmtaSnmpAgent::SoftReset
Pausing trap thread
emta factory agentResetting to default state.
emta factory agent destroying users...
emta factory agent destroying notifies...
emta factory agent destroying views...
emta factory agent entering RFC-2576 Coexistence security mode.
emta factory agent entering Basic/Hybrid flow provisioning mode.
Resuming trap thread
Stopping DHCP/ToD/TFTP (client requested)...
[03:13:54 01/01/1970] [CmDocsisIpThread] BcmEcosIpHalIf::RemoveIpv6Address: (IP
Stack1 HalIf) ERROR - Failed to remove IPv6 address fe80::fe4a:e9ff:fede:ad88/64
from the stack!
[03:13:54 01/01/1970] [CmDocsisIpThread] BcmDhcpV6ClientIf::ReleaseAddresses:
(DHCPv6 ClientIf for IP Stack1) ERROR - IA state is initial; there is no address to
release.
BcmDocsis3DsMacEnableMulticastDsidForwarding 0; primary DS = 0
SCQAM DSID filter control = 0x00
OFDM DSID filter control = 0x01
Deleting DOCSIS 1.0 CoS Settings for SID 0xc9
[03:13:55 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows:
(DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along
with associated Classifiers and PHS rules...
[03:13:55 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState:
(CmDocsisCtlThread)
[03:13:55 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Primary SID for usHwChannel 0 to 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 1
Updating US chan 8 data Profile test msg for Sid: 0x0.
Updating US chan 9 data Profile test msg for Sid: 0x0.
CM/DocsisCtl> [03:13:55 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL declared PULSE lost!
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=false
[03:13:55 01/01/1970] [CmDocsisCtlThread] BcmCmMultiDsHelper::PreRegDsChanChange:
target freq hz = 0
reason string = ErrorRecovery
CmInitReason = 16

Starting DS scanning...
[03:13:55 01/01/1970] [CmDocsisCtlThread] BcmCmDownstreamScan::StartScan: Starting
DS scan
Checking for cable cut...

CM/DocsisCtl> Plant power is 15.65

Cable connected

CM/DocsisCtl> Scanning 660.000 MHz SC-QAM (Annex A(Eu.1M))


Scanning 661.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 662.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 663.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 664.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 665.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 666.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 667.000 MHz SC-QAM (Annex A(Eu.1M)) locked SC-QAM
[03:13:58 01/01/1970] [CmDocsisCtlThread] BcmCmDsChan::DsLockOk: (BcmCmDsChan 0)
hwRxId=0 freq=0 dcid=0

******************************************
DOWNSTREAM STATUS
******************************************
HW Channel ID = 0
Phy type: SC-QAM
DS active chan settings:
ds chan id = 0
center freq, Hz = 667000000 Hz
primary capable = false
status event rpt bitmask = 0

CM HW Detected DS Phy Settings:


Center Freq, Hz = 667000000
QAM = Locked
FEC = Locked
Carrier Freq Offset, kHz = 0
Channel Width, Hz = 8000000
Modulation = Qam256
Interleaver = Taps12Incr17
Symbol Rate, sym/sec = 6952000

******************************************

[03:13:59 01/01/1970] [CmDocsisCtlThread]


BcmCmMacDomainSetsState::StartDsMacMddInit:
**********************************************
Waiting for MDDs...
**********************************************

CM/DocsisCtl>
BcmCmDocsisCtlMsgACT::HandleEvent() @time=11639770 event_code=4
(kCmPriDsMddSetsOk)
MDD diplexer band edge not specified.
MDD Plant US Frequency Range = extended.
Requested Spectrum = US:(0 MHz..85 MHz) DS:(0 MHz..0 MHz)
Best Match = 0: US:(5 MHz..85 MHz) DS:(108 MHz..1218 MHz)
Switchable diplexer ECN support disabled. NOT switching diplexer.
[03:13:59 01/01/1970] [CmDocsisCtlThread]
BcmCmMdDsSgDiscState::TrimSgSetWithoutThisDcid:
1 candidate MD-DS-SG remain after TrimSgSetWithoutThisDcid( target_dcid )
for target_dcid=0x12 (18)
[03:13:59 01/01/1970] [CmDocsisCtlThread] BcmCmMdDsSgDiscState::StartMdDsSgDisc:
special case: one and only one MD-DS-SG contains mdd_dcid.
fMdDsSgId=0x1d (29)
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , M-d++a+i-+Ty-eA+dA++e|:
i_L-ca+A++e|A: 1
Chec+ +D_A++e|A
Cha++e+ Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1

MD-DS-SG discovery info:


fCmMdDsSgDiscState = 6 (kMdDsSgDiscDone)
fMdDsSgId = 0x1d (29)
fMdDsSgDiscovered = true

Trimmed Candidate Downstream Service Group Settings List: list size = 1

sgid size member dcid's


---- ---- -------------
29 34 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
27 28 29 30 31 32 159 160

Downstream Active Channel Settings List:

dcid type frequency prim capable rpt enable mod/annex or PLC params
---- -------- --------- ------------ ---------- -----------------------
1 SC-QAM 531000000 y 0x36 256QAM/AnnexA
2 SC-QAM 539000000 y 0x36 256QAM/AnnexA
3 SC-QAM 547000000 y 0x36 256QAM/AnnexA
4 SC-QAM 555000000 y 0x36 256QAM/AnnexA
5 SC-QAM 563000000 y 0x36 256QAM/AnnexA
6 SC-QAM 571000000 y 0x36 256QAM/AnnexA
7 SC-QAM 579000000 y 0x36 256QAM/AnnexA
8 SC-QAM 587000000 y 0x36 256QAM/AnnexA
9 SC-QAM 595000000 y 0x36 256QAM/AnnexA
10 SC-QAM 603000000 y 0x36 256QAM/AnnexA
11 SC-QAM 611000000 y 0x36 256QAM/AnnexA
12 SC-QAM 619000000 y 0x36 256QAM/AnnexA
13 SC-QAM 627000000 y 0x36 256QAM/AnnexA
14 SC-QAM 635000000 y 0x36 256QAM/AnnexA
15 SC-QAM 643000000 y 0x36 256QAM/AnnexA
16 SC-QAM 651000000 y 0x36 256QAM/AnnexA
17 SC-QAM 659000000 y 0x36 256QAM/AnnexA
18 SC-QAM 667000000 y 0x36 256QAM/AnnexA
19 SC-QAM 675000000 y 0x36 256QAM/AnnexA
20 SC-QAM 683000000 y 0x36 256QAM/AnnexA
21 SC-QAM 691000000 y 0x36 256QAM/AnnexA
22 SC-QAM 699000000 y 0x36 256QAM/AnnexA
23 SC-QAM 707000000 y 0x36 256QAM/AnnexA
24 SC-QAM 715000000 y 0x36 256QAM/AnnexA
25 SC-QAM 723000000 y 0x36 256QAM/AnnexA
26 SC-QAM 731000000 y 0x36 256QAM/AnnexA
27 SC-QAM 739000000 y 0x36 256QAM/AnnexA
28 SC-QAM 747000000 y 0x36 256QAM/AnnexA
29 SC-QAM 755000000 y 0x36 256QAM/AnnexA
30 SC-QAM 763000000 y 0x36 256QAM/AnnexA
31 SC-QAM 771000000 y 0x36 256QAM/AnnexA
32 SC-QAM 779000000 y 0x36 256QAM/AnnexA
159 OFDM PLC 897000000 n 0x36 25Khz/5us/0.625us
160 OFDM PLC 361000000 n 0x36 50Khz/0.9375us/0.625us

Trimmed Downstream Ambiguity Resolution Frequency List: list size = 3

531000000-sc_qam 539000000-sc_qam 547000000-sc_qam

visible dcid set = 18


freq with visible dcid set = 667000000

BcmCmDocsisCtlMsgACT::HandleEvent() @time=11640360 event_code=11


(kCmMdDsSgDiscDone)
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=true
[03:14:00 01/01/1970] [CmDocsisCtlThread]
BcmDocsisCmHalIf::SetPrimaryDownstreamChannel: (DOCSIS CableModem HalIf)
Installing primary downstream channel index: 0
SetRatios called with primary downstream channel number = 0
AnnexMode[0] = 1 QAM_Mode[0] = 256
Num/Den = 869/1280
3390 SCDMA/OFDM mode - ChannelNumber = 0 Numerator = 869 Denominator = 1280
CM/DocsisCtl> [03:14:00 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL failed to acquire sync or lost sync!
... TCOFDM - DTR is now locked.... (T2=150ms Sync=14)

Given a 216 MHz TCOFDM clock, the nominal value for the DTR FCW is 0xC22E45067
The DTR FCW is 0xc22e8f05 - that value is good (5, within 100 ppm)
Kicked off the DPLL
LE Done bit was set
LE Done bit was set
SCQAM DS clock source.
PLL in Leaky mode.
PLL Fn = 6, k1 = 18, k2 = 19
[03:14:00 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context=1 (ErrorRecovery)
[03:14:00 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context is error recovery or startup.
Always use last good upstream target chan id=1
[03:14:00 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper) Locked on the downstream. Waiting for UCDs...
[03:14:00 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefFail: (Cm
Multi US Helper) target hwTxId=0
CM/DocsisCtl> [03:14:02 01/01/1970] [CmDocsisCtlThread]
BcmCmMultiUsHelper::TmUcdRxTimerEvent: (Cm Multi US Helper)
ucd gathering ok.

[03:14:02 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper) state at
entry:

Channel targeting:
Downstream:
fTargetDsFreqHz = 0 (0)
fCurrentDsFreqHz = 0x27c19cc0 (667000000)
fStoredDsFreqHz = 0x29020c00 (688000000)

Upstream:
fDestSingleTxTargetUsChanId = 0x1 (1)
fTargetingContext = 1 (ErrorRecovery)

Startup UCD Selection Info:


low priority candidate ucid list = 2 1 3 4 8 6 5 7
happy home ucid set = 1 2 3 4

Upstream Active Channel Settings:

ucid rpt enable sel prio MAP source dcid's


---- ---------- -------- -----------------
1 0x1c0 0
2 0x1c0 0
3 0x1c0 0
4 0x1c0 0
5 0x1c0 0
6 0x1c0 0
7 0x1c0 0
8 0x1c0 0

BcmCmUsTargetMset (a.k.a. usable UCDs gathered during startup):

us config
phy change ranging scdma
type ucid dcid count tried? enabled?
---- ---- ---- ------ ------- --------
3 1 18 4 n n
3 2 18 4 n n
3 3 18 4 n n
3 4 18 4 n n
3 5 18 4 n n
3 6 18 4 n n
3 7 18 4 n n
3 8 18 4 n n

[03:14:02 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper)
starting docs3 upstream initialization on target ucid=2
with upstream phy type 3 on hardware transmitter index 0

[03:14:02 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::ExecuteTccCmd: hwTxId=0


docs ucid=0
[03:14:02 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0
[03:14:02 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::InstallUsSets: Installing
UCD w/ucid for UCID=2 for CM hardware tx chan 0

[03:14:02 01/01/1970] [CmDocsisCtlThread]


BcmCmUsSetsState::TestAndLaunchUsTimeSync: starting upstream time sync
acquisition...
[03:14:02 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefOk: (Cm
Multi US Helper) target hwTxId=0
[03:14:02 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::UsTimeRefOk: upstream time
sync acquired for fHwTxId=0

== Beginning initial ranging for Docsis UCID 2 ==


Minimum transmit power is 17 dBmV
Maximum transmit power is 53 dBmV
Stored power level for UCID 2 is 38 dBmV
Using per transmitter stored initial upstream power = 38 dBmV hwTxId = 0 docsis
UCID = 2
RNG-RSP UsChanId=2 Adj: tim=1944 freq=46 Stat=Continue (CmdPwr (UsChanId-dBmV):
(2-40.50) )
[03:14:03 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0xc9
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (2-
41.00) )
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (2-
41.00) )
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (2-
41.00) )
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (2-
41.00) )
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Success (CmdPwr (UsChanId-dBmV): (2-
41.00) )
[03:14:09 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::FirstRngSuccess:
(CmDocsisCtlThread)
first RNG-RSP w/status==SUCCESS for hwTxId=0 and DOCSIS ucid=2
[03:14:09 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::LaunchEaeBpkm:
(CmDocsisCtlThread) BPKM enabled. starting Early Authentication and Encryption BPKM
key requests. Primary Sid = 201
CM/DocsisCtl> Bandwidth request failure! Status = 0

BcmCmUsChanTimerMuxACT::HandleEvent() @time=11838730 fTimerType=5


(kT4NoStationMaint) hwTxId=0 docs ucid=2
[03:17:18 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::T4NoStationMaintEvent: ERROR - no Station Maint map op error.
hwTxId=0 docs ucid=2
[03:17:18 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::CommonRngErrorHandler: reason=10 (T4NoStationMaintTimeout)
hwTxId=0 docs ucid=2
[03:17:18 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) Purging DS
frequency 667000000 from current scan pass due to pre-registration restart error
[03:17:18 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) reinit MAC #54:
T4NoStationMaintTimeout

[03:17:18 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::Reset:


(CmDocsisCtlThread) DefaultSnmpAgentClass::RestartPendingEvent for Vendor CM
Agent w/ BRCM Factory Support
Logging event: Received Response to Broadcast Maintenance Request, But no Unicast
Maintenance opportunities received - T4 time out;CM-MAC=fc:4a:e9:de:ad:88;CMTS-
MAC=28:52:61:fa:d8:78;CM-QOS=1.1;CM-VER=3.1;
Vendor CM Agent w/ BRCM Factory Support updating ifTableLastChange.
Vendor CM Agent w/ BRCM Factory Support resetting to default state.
Vendor CM Agent w/ BRCM Factory Support destroying users...
Vendor CM Agent w/ BRCM Factory Support destroying notifies...
Vendor CM Agent w/ BRCM Factory Support destroying views...
Allowing DOCS-CABLE-DEVICE-MIB IP filters.
Vendor CM Agent w/ BRCM Factory Support deferring traps.
CM/DocsisCtl> Received RG Event 0x80000001 State 0x1
eRouter Linux WAN Down
[03:17:19 01/01/1970] [eRouterMsgPipe] eRouterMsgPipe::UpdateIpNetToMediaEntry:
(eRouterMsgPipe) eRouter IP address:0.0.0.0
03:17:19.030 01/01/1970 (CALC) mtaCmStatusInfo() - MTA is Signaled: *NOT-
OPERATIONAL* (Stat=0x1) emtaCurState = 0.
EmtaSnmpAgent::SoftReset
Pausing trap thread
emta factory agentResetting to default state.
emta factory agent destroying users...
emta factory agent destroying notifies...
emta factory agent destroying views...
emta factory agent entering RFC-2576 Coexistence security mode.
emta factory agent entering Basic/Hybrid flow provisioning mode.
Resuming trap thread
Stopping DHCP/ToD/TFTP (client requested)...
[03:17:19 01/01/1970] [CmDocsisIpThread] BcmEcosIpHalIf::RemoveIpv6Address: (IP
Stack1 HalIf) ERROR - Failed to remove IPv6 address fe80::fe4a:e9ff:fede:ad88/64
from the stack!
[03:17:19 01/01/1970] [CmDocsisIpThread] BcmDhcpV6ClientIf::ReleaseAddresses:
(DHCPv6 ClientIf for IP Stack1) ERROR - IA state is initial; there is no address to
release.
BcmDocsis3DsMacEnableMulticastDsidForwarding 0; primary DS = 0
SCQAM DSID filter control = 0x00
OFDM DSID filter control = 0x01
Deleting DOCSIS 1.0 CoS Settings for SID 0xc9
[03:17:19 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows:
(DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along
with associated Classifiers and PHS rules...
[03:17:19 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState:
(CmDocsisCtlThread)
[03:17:19 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Primary SID for usHwChannel 0 to 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 1
Updating US chan 8 data Profile test msg for Sid: 0x0.
Updating US chan 9 data Profile test msg for Sid: 0x0.
CM/DocsisCtl> [03:17:20 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL declared PULSE lost!
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=false
[03:17:20 01/01/1970] [CmDocsisCtlThread] BcmCmMultiDsHelper::PreRegDsChanChange:
target freq hz = 0
reason string = ErrorRecovery
CmInitReason = 16

Starting DS scanning...
[03:17:20 01/01/1970] [CmDocsisCtlThread] BcmCmDownstreamScan::StartScan: Starting
DS scan
Checking for cable cut...

CM/DocsisCtl> Plant power is 15.75

Cable connected

CM/DocsisCtl> Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)


Scanning 668.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 669.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 670.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 671.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 672.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 673.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 674.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 675.000 MHz SC-QAM (Annex A(Eu.1M)) locked SC-QAM
[03:17:23 01/01/1970] [CmDocsisCtlThread] BcmCmDsChan::DsLockOk: (BcmCmDsChan 0)
hwRxId=0 freq=0 dcid=0
******************************************
DOWNSTREAM STATUS
******************************************
HW Channel ID = 0
Phy type: SC-QAM
DS active chan settings:
ds chan id = 0
center freq, Hz = 675000000 Hz
primary capable = false
status event rpt bitmask = 0

CM HW Detected DS Phy Settings:


Center Freq, Hz = 675000000
QAM = Locked
FEC = Locked
Carrier Freq Offset, kHz = 0
Channel Width, Hz = 8000000
Modulation = Qam256
Interleaver = Taps12Incr17
Symbol Rate, sym/sec = 6952000

******************************************

[03:17:23 01/01/1970] [CmDocsisCtlThread]


BcmCmMacDomainSetsState::StartDsMacMddInit:
**********************************************
Waiting for MDDs...
**********************************************

CM/DocsisCtl>
BcmCmDocsisCtlMsgACT::HandleEvent() @time=11845770 event_code=4
(kCmPriDsMddSetsOk)
MDD diplexer band edge not specified.
MDD Plant US Frequency Range = extended.
Requested Spectrum = US:(0 MHz..85 MHz) DS:(0 MHz..0 MHz)
Best Match = 0: US:(5 MHz..85 MHz) DS:(108 MHz..1218 MHz)
Switchable diplexer ECN support disabled. NOT switching diplexer.
[03:17:25 01/01/1970] [CmDocsisCtlThread]
BcmCmMdDsSgDiscState::TrimSgSetWithoutThisDcid:
1 candidate MD-DS-SG remain after TrimSgSetWithoutThisDcid( target_dcid )
for target_dcid=0x13 (19)
[03:17:25 01/01/1970] [CmDocsisCtlThread] BcmCmMdDsSgDiscState::StartMdDsSgDisc:
special case: one and only one MD-DS-SG contains mdd_dcid.
fMdDsSgId=0x1d (29)
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , M-d++a+i-+Ty-eA+dA++e|:
i_L-ca+A++e|A: 1
Chec+ +D_A++e|A
Cha++e+ Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1

MD-DS-SG discovery info:

fCmMdDsSgDiscState = 6 (kMdDsSgDiscDone)
fMdDsSgId = 0x1d (29)
fMdDsSgDiscovered = true

Trimmed Candidate Downstream Service Group Settings List: list size = 1

sgid size member dcid's


---- ---- -------------
29 34 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
27 28 29 30 31 32 159 160

Downstream Active Channel Settings List:

dcid type frequency prim capable rpt enable mod/annex or PLC params
---- -------- --------- ------------ ---------- -----------------------
1 SC-QAM 531000000 y 0x36 256QAM/AnnexA
2 SC-QAM 539000000 y 0x36 256QAM/AnnexA
3 SC-QAM 547000000 y 0x36 256QAM/AnnexA
4 SC-QAM 555000000 y 0x36 256QAM/AnnexA
5 SC-QAM 563000000 y 0x36 256QAM/AnnexA
6 SC-QAM 571000000 y 0x36 256QAM/AnnexA
7 SC-QAM 579000000 y 0x36 256QAM/AnnexA
8 SC-QAM 587000000 y 0x36 256QAM/AnnexA
9 SC-QAM 595000000 y 0x36 256QAM/AnnexA
10 SC-QAM 603000000 y 0x36 256QAM/AnnexA
11 SC-QAM 611000000 y 0x36 256QAM/AnnexA
12 SC-QAM 619000000 y 0x36 256QAM/AnnexA
13 SC-QAM 627000000 y 0x36 256QAM/AnnexA
14 SC-QAM 635000000 y 0x36 256QAM/AnnexA
15 SC-QAM 643000000 y 0x36 256QAM/AnnexA
16 SC-QAM 651000000 y 0x36 256QAM/AnnexA
17 SC-QAM 659000000 y 0x36 256QAM/AnnexA
18 SC-QAM 667000000 y 0x36 256QAM/AnnexA
19 SC-QAM 675000000 y 0x36 256QAM/AnnexA
20 SC-QAM 683000000 y 0x36 256QAM/AnnexA
21 SC-QAM 691000000 y 0x36 256QAM/AnnexA
22 SC-QAM 699000000 y 0x36 256QAM/AnnexA
23 SC-QAM 707000000 y 0x36 256QAM/AnnexA
24 SC-QAM 715000000 y 0x36 256QAM/AnnexA
25 SC-QAM 723000000 y 0x36 256QAM/AnnexA
26 SC-QAM 731000000 y 0x36 256QAM/AnnexA
27 SC-QAM 739000000 y 0x36 256QAM/AnnexA
28 SC-QAM 747000000 y 0x36 256QAM/AnnexA
29 SC-QAM 755000000 y 0x36 256QAM/AnnexA
30 SC-QAM 763000000 y 0x36 256QAM/AnnexA
31 SC-QAM 771000000 y 0x36 256QAM/AnnexA
32 SC-QAM 779000000 y 0x36 256QAM/AnnexA
159 OFDM PLC 897000000 n 0x36 25Khz/5us/0.625us
160 OFDM PLC 361000000 n 0x36 50Khz/0.9375us/0.625us

Trimmed Downstream Ambiguity Resolution Frequency List: list size = 3

531000000-sc_qam 539000000-sc_qam 547000000-sc_qam

visible dcid set = 19

freq with visible dcid set = 675000000

BcmCmDocsisCtlMsgACT::HandleEvent() @time=11846360 event_code=11


(kCmMdDsSgDiscDone)
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=true
[03:17:26 01/01/1970] [CmDocsisCtlThread]
BcmDocsisCmHalIf::SetPrimaryDownstreamChannel: (DOCSIS CableModem HalIf)
Installing primary downstream channel index: 0
SetRatios called with primary downstream channel number = 0
AnnexMode[0] = 1 QAM_Mode[0] = 256
Num/Den = 869/1280
3390 SCDMA/OFDM mode - ChannelNumber = 0 Numerator = 869 Denominator = 1280
CM/DocsisCtl> [03:17:26 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL failed to acquire sync or lost sync!
... TCOFDM - DTR is now locked.... (T2=150ms Sync=14)

Given a 216 MHz TCOFDM clock, the nominal value for the DTR FCW is 0xC22E45067
The DTR FCW is 0xc22e9225 - that value is good (6, within 100 ppm)
Kicked off the DPLL
LE Done bit was set
LE Done bit was set
SCQAM DS clock source.
PLL in Leaky mode.
PLL Fn = 6, k1 = 18, k2 = 19
[03:17:26 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context=1 (ErrorRecovery)
[03:17:26 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context is error recovery or startup.
Always use last good upstream target chan id=1
[03:17:26 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper) Locked on the downstream. Waiting for UCDs...
[03:17:26 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefFail: (Cm
Multi US Helper) target hwTxId=0
CM/DocsisCtl> [03:17:28 01/01/1970] [CmDocsisCtlThread]
BcmCmMultiUsHelper::TmUcdRxTimerEvent: (Cm Multi US Helper)
ucd gathering ok.

[03:17:28 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper) state at
entry:

Channel targeting:
Downstream:
fTargetDsFreqHz = 0 (0)
fCurrentDsFreqHz = 0x283baec0 (675000000)
fStoredDsFreqHz = 0x29020c00 (688000000)

Upstream:
fDestSingleTxTargetUsChanId = 0x1 (1)
fTargetingContext = 1 (ErrorRecovery)

Startup UCD Selection Info:

low priority candidate ucid list = 4 1 3 2 7 5 6 8


happy home ucid set = 1 2 3 4

Upstream Active Channel Settings:

ucid rpt enable sel prio MAP source dcid's


---- ---------- -------- -----------------
1 0x1c0 0
2 0x1c0 0
3 0x1c0 0
4 0x1c0 0
5 0x1c0 0
6 0x1c0 0
7 0x1c0 0
8 0x1c0 0

BcmCmUsTargetMset (a.k.a. usable UCDs gathered during startup):

us config
phy change ranging scdma
type ucid dcid count tried? enabled?
---- ---- ---- ------ ------- --------
3 1 19 4 n n
3 2 19 4 n n
3 3 19 4 n n
3 4 19 4 n n
3 5 19 4 n n
3 6 19 4 n n
3 7 19 4 n n
3 8 19 4 n n

[03:17:28 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper)
starting docs3 upstream initialization on target ucid=4
with upstream phy type 3 on hardware transmitter index 0

[03:17:28 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::ExecuteTccCmd: hwTxId=0


docs ucid=0
[03:17:28 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0
[03:17:28 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::InstallUsSets: Installing
UCD w/ucid for UCID=4 for CM hardware tx chan 0

[03:17:28 01/01/1970] [CmDocsisCtlThread]


BcmCmUsSetsState::TestAndLaunchUsTimeSync: starting upstream time sync
acquisition...
[03:17:28 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefOk: (Cm
Multi US Helper) target hwTxId=0
[03:17:28 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::UsTimeRefOk: upstream time
sync acquired for fHwTxId=0

== Beginning initial ranging for Docsis UCID 4 ==


Minimum transmit power is 17 dBmV
Maximum transmit power is 53 dBmV
Stored power level for UCID 4 is 42 dBmV
Using per transmitter stored initial upstream power = 42 dBmV hwTxId = 0 docsis
UCID = 4
RNG-RSP UsChanId=4 Adj: tim=1980 freq=34 Stat=Continue (CmdPwr (UsChanId-dBmV):
(4-41.75) )
[03:17:29 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0xc9
RNG-RSP UsChanId=4 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (4-
41.25) )
RNG-RSP UsChanId=4 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (4-
41.25) )
RNG-RSP UsChanId=4 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (4-
41.75) )
RNG-RSP UsChanId=4 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (4-
41.25) )
RNG-RSP UsChanId=4 Adj: tim=0 freq=0 Stat=Success (CmdPwr (UsChanId-dBmV): (4-
41.25) )
[03:17:34 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::FirstRngSuccess:
(CmDocsisCtlThread)
first RNG-RSP w/status==SUCCESS for hwTxId=0 and DOCSIS ucid=4
[03:17:34 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::LaunchEaeBpkm:
(CmDocsisCtlThread) BPKM enabled. starting Early Authentication and Encryption BPKM
key requests. Primary Sid = 201
CM/DocsisCtl> Bandwidth request failure! Status = 0

BcmCmUsChanTimerMuxACT::HandleEvent() @time=12043790 fTimerType=5


(kT4NoStationMaint) hwTxId=0 docs ucid=4
[03:20:43 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::T4NoStationMaintEvent: ERROR - no Station Maint map op error.
hwTxId=0 docs ucid=4
[03:20:43 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::CommonRngErrorHandler: reason=10 (T4NoStationMaintTimeout)
hwTxId=0 docs ucid=4
[03:20:43 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) Purging DS
frequency 675000000 from current scan pass due to pre-registration restart error
[03:20:43 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) reinit MAC #55:
T4NoStationMaintTimeout

[03:20:43 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::Reset:


(CmDocsisCtlThread) DefaultSnmpAgentClass::RestartPendingEvent for Vendor CM
Agent w/ BRCM Factory Support
Logging event: Received Response to Broadcast Maintenance Request, But no Unicast
Maintenance opportunities received - T4 time out;CM-MAC=fc:4a:e9:de:ad:88;CMTS-
MAC=28:52:61:fa:d8:78;CM-QOS=1.1;CM-VER=3.1;
Vendor CM Agent w/ BRCM Factory Support updating ifTableLastChange.
Vendor CM Agent w/ BRCM Factory Support resetting to default state.
Vendor CM Agent w/ BRCM Factory Support destroying users...
Vendor CM Agent w/ BRCM Factory Support destroying notifies...
Vendor CM Agent w/ BRCM Factory Support destroying views...
Allowing DOCS-CABLE-DEVICE-MIB IP filters.
Vendor CM Agent w/ BRCM Factory Support deferring traps.
Received RG Event 0x80000001 State 0x1
eRouter Linux WAN Down
[03:20:44 01/01/1970] [eRouterMsgPipe] eRouterMsgPipe::UpdateIpNetToMediaEntry:
(eRouterMsgPipe) eRouter IP address:0.0.0.0
03:20:44.080 01/01/1970 (CALC) mtaCmStatusInfo() - MTA is Signaled: *NOT-
OPERATIONAL* (Stat=0x1) emtaCurState = 0.
EmtaSnmpAgent::SoftReset
Pausing trap thread
emta factory agentResetting to default state.
emta factory agent destroying users...
emta factory agent destroying notifies...
emta factory agent destroying views...
emta factory agent entering RFC-2576 Coexistence security mode.
emta factory agent entering Basic/Hybrid flow provisioning mode.
Resuming trap thread
Stopping DHCP/ToD/TFTP (client requested)...
[03:20:44 01/01/1970] [CmDocsisIpThread] BcmEcosIpHalIf::RemoveIpv6Address: (IP
Stack1 HalIf) ERROR - Failed to remove IPv6 address fe80::fe4a:e9ff:fede:ad88/64
from the stack!
[03:20:44 01/01/1970] [CmDocsisIpThread] BcmDhcpV6ClientIf::ReleaseAddresses:
(DHCPv6 ClientIf for IP Stack1) ERROR - IA state is initial; there is no address to
release.
BcmDocsis3DsMacEnableMulticastDsidForwarding 0; primary DS = 0
SCQAM DSID filter control = 0x00
OFDM DSID filter control = 0x01
Deleting DOCSIS 1.0 CoS Settings for SID 0xc9
[03:20:44 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows:
(DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along
with associated Classifiers and PHS rules...
[03:20:44 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState:
(CmDocsisCtlThread)
[03:20:44 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Primary SID for usHwChannel 0 to 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 1
Updating US chan 8 data Profile test msg for Sid: 0x0.
Updating US chan 9 data Profile test msg for Sid: 0x0.
CM/DocsisCtl> [03:20:45 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL declared PULSE lost!
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=false
[03:20:45 01/01/1970] [CmDocsisCtlThread] BcmCmMultiDsHelper::PreRegDsChanChange:
target freq hz = 0
reason string = ErrorRecovery
CmInitReason = 16

Starting DS scanning...
[03:20:45 01/01/1970] [CmDocsisCtlThread] BcmCmDownstreamScan::StartScan: Starting
DS scan
Checking for cable cut...

CM/DocsisCtl> Plant power is 15.65

Cable connected

CM/DocsisCtl> Scanning 676.000 MHz SC-QAM (Annex A(Eu.1M))


Scanning 677.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 678.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 679.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 680.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 681.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 682.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 683.000 MHz SC-QAM (Annex A(Eu.1M)) locked SC-QAM
[03:20:48 01/01/1970] [CmDocsisCtlThread] BcmCmDsChan::DsLockOk: (BcmCmDsChan 0)
hwRxId=0 freq=0 dcid=0

******************************************
DOWNSTREAM STATUS
******************************************
HW Channel ID = 0
Phy type: SC-QAM
DS active chan settings:
ds chan id = 0
center freq, Hz = 683000000 Hz
primary capable = false
status event rpt bitmask = 0

CM HW Detected DS Phy Settings:


Center Freq, Hz = 683000000
QAM = Locked
FEC = Locked
Carrier Freq Offset, kHz = 0
Channel Width, Hz = 8000000
Modulation = Qam256
Interleaver = Taps12Incr17
Symbol Rate, sym/sec = 6952000

******************************************

[03:20:48 01/01/1970] [CmDocsisCtlThread]


BcmCmMacDomainSetsState::StartDsMacMddInit:
**********************************************
Waiting for MDDs...
**********************************************

CM/DocsisCtl>
BcmCmDocsisCtlMsgACT::HandleEvent() @time=12049770 event_code=4
(kCmPriDsMddSetsOk)
MDD diplexer band edge not specified.
MDD Plant US Frequency Range = extended.
Requested Spectrum = US:(0 MHz..85 MHz) DS:(0 MHz..0 MHz)
Best Match = 0: US:(5 MHz..85 MHz) DS:(108 MHz..1218 MHz)
Switchable diplexer ECN support disabled. NOT switching diplexer.
[03:20:49 01/01/1970] [CmDocsisCtlThread]
BcmCmMdDsSgDiscState::TrimSgSetWithoutThisDcid:
1 candidate MD-DS-SG remain after TrimSgSetWithoutThisDcid( target_dcid )
for target_dcid=0x14 (20)
[03:20:49 01/01/1970] [CmDocsisCtlThread] BcmCmMdDsSgDiscState::StartMdDsSgDisc:
special case: one and only one MD-DS-SG contains mdd_dcid.
fMdDsSgId=0x1d (29)
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , M-d++a+i-+Ty-eA+dA++e|:
i_L-ca+A++e|A: 1
Chec+ +D_A++e|A
Cha++e+ Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1

MD-DS-SG discovery info:

fCmMdDsSgDiscState = 6 (kMdDsSgDiscDone)
fMdDsSgId = 0x1d (29)
fMdDsSgDiscovered = true

Trimmed Candidate Downstream Service Group Settings List: list size = 1

sgid size member dcid's


---- ---- -------------
29 34 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
27 28 29 30 31 32 159 160

Downstream Active Channel Settings List:

dcid type frequency prim capable rpt enable mod/annex or PLC params
---- -------- --------- ------------ ---------- -----------------------
1 SC-QAM 531000000 y 0x36 256QAM/AnnexA
2 SC-QAM 539000000 y 0x36 256QAM/AnnexA
3 SC-QAM 547000000 y 0x36 256QAM/AnnexA
4 SC-QAM 555000000 y 0x36 256QAM/AnnexA
5 SC-QAM 563000000 y 0x36 256QAM/AnnexA
6 SC-QAM 571000000 y 0x36 256QAM/AnnexA
7 SC-QAM 579000000 y 0x36 256QAM/AnnexA
8 SC-QAM 587000000 y 0x36 256QAM/AnnexA
9 SC-QAM 595000000 y 0x36 256QAM/AnnexA
10 SC-QAM 603000000 y 0x36 256QAM/AnnexA
11 SC-QAM 611000000 y 0x36 256QAM/AnnexA
12 SC-QAM 619000000 y 0x36 256QAM/AnnexA
13 SC-QAM 627000000 y 0x36 256QAM/AnnexA
14 SC-QAM 635000000 y 0x36 256QAM/AnnexA
15 SC-QAM 643000000 y 0x36 256QAM/AnnexA
16 SC-QAM 651000000 y 0x36 256QAM/AnnexA
17 SC-QAM 659000000 y 0x36 256QAM/AnnexA
18 SC-QAM 667000000 y 0x36 256QAM/AnnexA
19 SC-QAM 675000000 y 0x36 256QAM/AnnexA
20 SC-QAM 683000000 y 0x36 256QAM/AnnexA
21 SC-QAM 691000000 y 0x36 256QAM/AnnexA
22 SC-QAM 699000000 y 0x36 256QAM/AnnexA
23 SC-QAM 707000000 y 0x36 256QAM/AnnexA
24 SC-QAM 715000000 y 0x36 256QAM/AnnexA
25 SC-QAM 723000000 y 0x36 256QAM/AnnexA
26 SC-QAM 731000000 y 0x36 256QAM/AnnexA
27 SC-QAM 739000000 y 0x36 256QAM/AnnexA
28 SC-QAM 747000000 y 0x36 256QAM/AnnexA
29 SC-QAM 755000000 y 0x36 256QAM/AnnexA
30 SC-QAM 763000000 y 0x36 256QAM/AnnexA
31 SC-QAM 771000000 y 0x36 256QAM/AnnexA
32 SC-QAM 779000000 y 0x36 256QAM/AnnexA
159 OFDM PLC 897000000 n 0x36 25Khz/5us/0.625us
160 OFDM PLC 361000000 n 0x36 50Khz/0.9375us/0.625us

Trimmed Downstream Ambiguity Resolution Frequency List: list size = 3

531000000-sc_qam 539000000-sc_qam 547000000-sc_qam

visible dcid set = 20

freq with visible dcid set = 683000000

BcmCmDocsisCtlMsgACT::HandleEvent() @time=12050360 event_code=11


(kCmMdDsSgDiscDone)
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=true
[03:20:50 01/01/1970] [CmDocsisCtlThread]
BcmDocsisCmHalIf::SetPrimaryDownstreamChannel: (DOCSIS CableModem HalIf)
Installing primary downstream channel index: 0
SetRatios called with primary downstream channel number = 0
AnnexMode[0] = 1 QAM_Mode[0] = 256
Num/Den = 869/1280
3390 SCDMA/OFDM mode - ChannelNumber = 0 Numerator = 869 Denominator = 1280
CM/DocsisCtl> [03:20:50 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL failed to acquire sync or lost sync!
... TCOFDM - DTR is now locked.... (T2=150ms Sync=14)

Given a 216 MHz TCOFDM clock, the nominal value for the DTR FCW is 0xC22E45067
The DTR FCW is 0xc22e900c - that value is good (5, within 100 ppm)
Kicked off the DPLL
LE Done bit was set
LE Done bit was set
SCQAM DS clock source.
PLL in Leaky mode.
PLL Fn = 6, k1 = 18, k2 = 19
[03:20:50 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context=1 (ErrorRecovery)
[03:20:50 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context is error recovery or startup.
Always use last good upstream target chan id=1
[03:20:50 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper) Locked on the downstream. Waiting for UCDs...
[03:20:50 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefFail: (Cm
Multi US Helper) target hwTxId=0
CM/DocsisCtl> [03:20:52 01/01/1970] [CmDocsisCtlThread]
BcmCmMultiUsHelper::TmUcdRxTimerEvent: (Cm Multi US Helper)
ucd gathering ok.

[03:20:52 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper) state at
entry:

Channel targeting:
Downstream:
fTargetDsFreqHz = 0 (0)
fCurrentDsFreqHz = 0x28b5c0c0 (683000000)
fStoredDsFreqHz = 0x29020c00 (688000000)

Upstream:
fDestSingleTxTargetUsChanId = 0x1 (1)
fTargetingContext = 1 (ErrorRecovery)

Startup UCD Selection Info:

low priority candidate ucid list = 4 1 3 2 6 7 5 8


happy home ucid set = 1 2 3 4

Upstream Active Channel Settings:

ucid rpt enable sel prio MAP source dcid's


---- ---------- -------- -----------------
1 0x1c0 0
2 0x1c0 0
3 0x1c0 0
4 0x1c0 0
5 0x1c0 0
6 0x1c0 0
7 0x1c0 0
8 0x1c0 0

BcmCmUsTargetMset (a.k.a. usable UCDs gathered during startup):

us config
phy change ranging scdma
type ucid dcid count tried? enabled?
---- ---- ---- ------ ------- --------
3 1 20 4 n n
3 2 20 4 n n
3 3 20 4 n n
3 4 20 4 n n
3 5 20 4 n n
3 6 20 4 n n
3 7 20 4 n n
3 8 20 4 n n

[03:20:52 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper)
starting docs3 upstream initialization on target ucid=4
with upstream phy type 3 on hardware transmitter index 0

[03:20:52 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::ExecuteTccCmd: hwTxId=0


docs ucid=0
[03:20:52 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0
[03:20:52 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::InstallUsSets: Installing
UCD w/ucid for UCID=4 for CM hardware tx chan 0

[03:20:52 01/01/1970] [CmDocsisCtlThread]


BcmCmUsSetsState::TestAndLaunchUsTimeSync: starting upstream time sync
acquisition...
[03:20:52 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefOk: (Cm
Multi US Helper) target hwTxId=0
[03:20:52 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::UsTimeRefOk: upstream time
sync acquired for fHwTxId=0

== Beginning initial ranging for Docsis UCID 4 ==


Minimum transmit power is 17 dBmV
Maximum transmit power is 53 dBmV
Stored power level for UCID 4 is 42 dBmV
Using per transmitter stored initial upstream power = 42 dBmV hwTxId = 0 docsis
UCID = 4
RNG-RSP UsChanId=4 Adj: tim=1900 freq=-19 Stat=Continue (CmdPwr (UsChanId-dBmV):
(4-41.25) )
[03:20:53 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0xc9
RNG-RSP UsChanId=4 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (4-
41.25) )
RNG-RSP UsChanId=4 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (4-
41.25) )
RNG-RSP UsChanId=4 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (4-
41.25) )
RNG-RSP UsChanId=4 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (4-
41.25) )
RNG-RSP UsChanId=4 Adj: tim=0 freq=0 Stat=Success (CmdPwr (UsChanId-dBmV): (4-
41.25) )
[03:20:58 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::FirstRngSuccess:
(CmDocsisCtlThread)
first RNG-RSP w/status==SUCCESS for hwTxId=0 and DOCSIS ucid=4
[03:20:58 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::LaunchEaeBpkm:
(CmDocsisCtlThread) BPKM enabled. starting Early Authentication and Encryption BPKM
key requests. Primary Sid = 201
CM/DocsisCtl>
CM/DocsisCtl>
CM/DocsisCtl>
CM/DocsisCtl>
CM/DocsisCtl> cd /Con

Active Command Table: Telnet/SSH Interactive Session Commands (Console)

CM -> Console

CM/CM_Console> show ip

Index Name MAC address IP Address


1 CM fc:4a:e9:de:ad:88 not configured
6 EMTA fc:4a:e9:ec:93:05 not configured
2 LAN Private fc:4a:e9:de:ad:02 192.168.100.1
2 LAN Private fc:4a:e9:de:ad:02 fe80::fe4a:e9ff:fede:ad02/64
9 ITC0->RG fc:4a:e9:de:ad:11 172.31.255.45
9 ITC0->RG fc:4a:e9:de:ad:11 fe80::fe4a:e9ff:fede:ad11/64
9 ITC0->RG fc:4a:e9:de:ad:11 fe80::ffff:ac1f:ff2d/64
9 ITC0->RG fc:4a:e9:de:ad:11 fd00::ffff:ac1f:ff2d/64

CM/CM_Console> Bandwidth request failure! Status = 0

BcmCmUsChanTimerMuxACT::HandleEvent() @time=12248330 fTimerType=5


(kT4NoStationMaint) hwTxId=0 docs ucid=4
[03:24:08 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::T4NoStationMaintEvent: ERROR - no Station Maint map op error.
hwTxId=0 docs ucid=4
[03:24:08 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::CommonRngErrorHandler: reason=10 (T4NoStationMaintTimeout)
hwTxId=0 docs ucid=4
[03:24:08 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) Purging DS
frequency 683000000 from current scan pass due to pre-registration restart error
[03:24:08 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) reinit MAC #56:
T4NoStationMaintTimeout

[03:24:08 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::Reset:


(CmDocsisCtlThread) DefaultSnmpAgentClass::RestartPendingEvent for Vendor CM
Agent w/ BRCM Factory Support
Logging event: Received Response to Broadcast Maintenance Request, But no Unicast
Maintenance opportunities received - T4 time out;CM-MAC=fc:4a:e9:de:ad:88;CMTS-
MAC=28:52:61:fa:d8:78;CM-QOS=1.1;CM-VER=3.1;
Vendor CM Agent w/ BRCM Factory Support updating ifTableLastChange.
Vendor CM Agent w/ BRCM Factory Support resetting to default state.
Vendor CM Agent w/ BRCM Factory Support destroying users...
Vendor CM Agent w/ BRCM Factory Support destroying notifies...
Vendor CM Agent w/ BRCM Factory Support destroying views...
Allowing DOCS-CABLE-DEVICE-MIB IP filters.
Vendor CM Agent w/ BRCM Factory Support deferring traps.
Received RG Event 0x80000001 State 0x1
eRouter Linux WAN Down
[03:24:08 01/01/1970] [eRouterMsgPipe] eRouterMsgPipe::UpdateIpNetToMediaEntry:
(eRouterMsgPipe) eRouter IP address:0.0.0.0
03:24:08.620 01/01/1970 (CALC) mtaCmStatusInfo() - MTA is Signaled: *NOT-
OPERATIONAL* (Stat=0x1) emtaCurState = 0.
EmtaSnmpAgent::SoftReset
Pausing trap thread
emta factory agentResetting to default state.
emta factory agent destroying users...
emta factory agent destroying notifies...
emta factory agent destroying views...
emta factory agent entering RFC-2576 Coexistence security mode.
emta factory agent entering Basic/Hybrid flow provisioning mode.
Resuming trap thread
Stopping DHCP/ToD/TFTP (client requested)...
[03:24:08 01/01/1970] [CmDocsisIpThread] BcmEcosIpHalIf::RemoveIpv6Address: (IP
Stack1 HalIf) ERROR - Failed to remove IPv6 address fe80::fe4a:e9ff:fede:ad88/64
from the stack!
[03:24:08 01/01/1970] [CmDocsisIpThread] BcmDhcpV6ClientIf::ReleaseAddresses:
(DHCPv6 ClientIf for IP Stack1) ERROR - IA state is initial; there is no address to
release.
BcmDocsis3DsMacEnableMulticastDsidForwarding 0; primary DS = 0
SCQAM DSID filter control = 0x00
OFDM DSID filter control = 0x01
Deleting DOCSIS 1.0 CoS Settings for SID 0xc9
[03:24:08 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows:
(DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along
with associated Classifiers and PHS rules...
[03:24:09 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState:
(CmDocsisCtlThread)
[03:24:09 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Primary SID for usHwChannel 0 to 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 1
Updating US chan 8 data Profile test msg for Sid: 0x0.
Updating US chan 9 data Profile test msg for Sid: 0x0.
CM/CM_Console> [03:24:09 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL declared PULSE lost!
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=false
[03:24:09 01/01/1970] [CmDocsisCtlThread] BcmCmMultiDsHelper::PreRegDsChanChange:
target freq hz = 0
reason string = ErrorRecovery
CmInitReason = 16

Starting DS scanning...
[03:24:09 01/01/1970] [CmDocsisCtlThread] BcmCmDownstreamScan::StartScan: Starting
DS scan
Checking for cable cut...

CM/CM_Console> Plant power is 15.65

Cable connected

Scanning 684.000 MHz SC-QAM (Annex A(Eu.1M))


CM/CM_Console> Scanning 685.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 686.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 687.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 688.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 689.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 690.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 691.000 MHz SC-QAM (Annex A(Eu.1M)) locked SC-QAM
[03:24:12 01/01/1970] [CmDocsisCtlThread] BcmCmDsChan::DsLockOk: (BcmCmDsChan 0)
hwRxId=0 freq=0 dcid=0

******************************************
DOWNSTREAM STATUS
******************************************
HW Channel ID = 0
Phy type: SC-QAM
DS active chan settings:
ds chan id = 0
center freq, Hz = 691000000 Hz
primary capable = false
status event rpt bitmask = 0

CM HW Detected DS Phy Settings:


Center Freq, Hz = 691000000
QAM = Locked
FEC = Locked
Carrier Freq Offset, kHz = 0
Channel Width, Hz = 8000000
Modulation = Qam256
Interleaver = Taps12Incr17
Symbol Rate, sym/sec = 6952000

******************************************

[03:24:12 01/01/1970] [CmDocsisCtlThread]


BcmCmMacDomainSetsState::StartDsMacMddInit:
**********************************************
Waiting for MDDs...
**********************************************
CM/CM_Console>
BcmCmDocsisCtlMsgACT::HandleEvent() @time=12253770 event_code=4
(kCmPriDsMddSetsOk)
MDD diplexer band edge not specified.
MDD Plant US Frequency Range = extended.
Requested Spectrum = US:(0 MHz..85 MHz) DS:(0 MHz..0 MHz)
Best Match = 0: US:(5 MHz..85 MHz) DS:(108 MHz..1218 MHz)
Switchable diplexer ECN support disabled. NOT switching diplexer.
[03:24:13 01/01/1970] [CmDocsisCtlThread]
BcmCmMdDsSgDiscState::TrimSgSetWithoutThisDcid:
1 candidate MD-DS-SG remain after TrimSgSetWithoutThisDcid( target_dcid )
for target_dcid=0x15 (21)
[03:24:13 01/01/1970] [CmDocsisCtlThread] BcmCmMdDsSgDiscState::StartMdDsSgDisc:
special case: one and only one MD-DS-SG contains mdd_dcid.
fMdDsSgId=0x1d (29)
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , M-d++a+i-+Ty-eA+dA++e|:
i_L-ca+A++e|A: 1
Chec+ +D_A++e|A
Cha++e+ Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1

MD-DS-SG discovery info:

fCmMdDsSgDiscState = 6 (kMdDsSgDiscDone)
fMdDsSgId = 0x1d (29)
fMdDsSgDiscovered = true

Trimmed Candidate Downstream Service Group Settings List: list size = 1

sgid size member dcid's


---- ---- -------------
29 34 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
27 28 29 30 31 32 159 160

Downstream Active Channel Settings List:

dcid type frequency prim capable rpt enable mod/annex or PLC params
---- -------- --------- ------------ ---------- -----------------------
1 SC-QAM 531000000 y 0x36 256QAM/AnnexA
2 SC-QAM 539000000 y 0x36 256QAM/AnnexA
3 SC-QAM 547000000 y 0x36 256QAM/AnnexA
4 SC-QAM 555000000 y 0x36 256QAM/AnnexA
5 SC-QAM 563000000 y 0x36 256QAM/AnnexA
6 SC-QAM 571000000 y 0x36 256QAM/AnnexA
7 SC-QAM 579000000 y 0x36 256QAM/AnnexA
8 SC-QAM 587000000 y 0x36 256QAM/AnnexA
9 SC-QAM 595000000 y 0x36 256QAM/AnnexA
10 SC-QAM 603000000 y 0x36 256QAM/AnnexA
11 SC-QAM 611000000 y 0x36 256QAM/AnnexA
12 SC-QAM 619000000 y 0x36 256QAM/AnnexA
13 SC-QAM 627000000 y 0x36 256QAM/AnnexA
14 SC-QAM 635000000 y 0x36 256QAM/AnnexA
15 SC-QAM 643000000 y 0x36 256QAM/AnnexA
16 SC-QAM 651000000 y 0x36 256QAM/AnnexA
17 SC-QAM 659000000 y 0x36 256QAM/AnnexA
18 SC-QAM 667000000 y 0x36 256QAM/AnnexA
19 SC-QAM 675000000 y 0x36 256QAM/AnnexA
20 SC-QAM 683000000 y 0x36 256QAM/AnnexA
21 SC-QAM 691000000 y 0x36 256QAM/AnnexA
22 SC-QAM 699000000 y 0x36 256QAM/AnnexA
23 SC-QAM 707000000 y 0x36 256QAM/AnnexA
24 SC-QAM 715000000 y 0x36 256QAM/AnnexA
25 SC-QAM 723000000 y 0x36 256QAM/AnnexA
26 SC-QAM 731000000 y 0x36 256QAM/AnnexA
27 SC-QAM 739000000 y 0x36 256QAM/AnnexA
28 SC-QAM 747000000 y 0x36 256QAM/AnnexA
29 SC-QAM 755000000 y 0x36 256QAM/AnnexA
30 SC-QAM 763000000 y 0x36 256QAM/AnnexA
31 SC-QAM 771000000 y 0x36 256QAM/AnnexA
32 SC-QAM 779000000 y 0x36 256QAM/AnnexA
159 OFDM PLC 897000000 n 0x36 25Khz/5us/0.625us
160 OFDM PLC 361000000 n 0x36 50Khz/0.9375us/0.625us

Trimmed Downstream Ambiguity Resolution Frequency List: list size = 3


531000000-sc_qam 539000000-sc_qam 547000000-sc_qam

visible dcid set = 21

freq with visible dcid set = 691000000

BcmCmDocsisCtlMsgACT::HandleEvent() @time=12254370 event_code=11


(kCmMdDsSgDiscDone)
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=true
[03:24:14 01/01/1970] [CmDocsisCtlThread]
BcmDocsisCmHalIf::SetPrimaryDownstreamChannel: (DOCSIS CableModem HalIf)
Installing primary downstream channel index: 0
SetRatios called with primary downstream channel number = 0
AnnexMode[0] = 1 QAM_Mode[0] = 256
Num/Den = 869/1280
3390 SCDMA/OFDM mode - ChannelNumber = 0 Numerator = 869 Denominator = 1280
CM/CM_Console> [03:24:14 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL failed to acquire sync or lost sync!
... TCOFDM - DTR is now locked.... (T2=150ms Sync=14)

Given a 216 MHz TCOFDM clock, the nominal value for the DTR FCW is 0xC22E45067
The DTR FCW is 0xc22e9857 - that value is good (6, within 100 ppm)
Kicked off the DPLL
LE Done bit was set
LE Done bit was set
SCQAM DS clock source.
PLL in Leaky mode.
PLL Fn = 6, k1 = 18, k2 = 19
[03:24:14 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context=1 (ErrorRecovery)
[03:24:14 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context is error recovery or startup.
Always use last good upstream target chan id=1
[03:24:14 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper) Locked on the downstream. Waiting for UCDs...
[03:24:14 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefFail: (Cm
Multi US Helper) target hwTxId=0
CM/CM_Console> [03:24:16 01/01/1970] [CmDocsisCtlThread]
BcmCmMultiUsHelper::TmUcdRxTimerEvent: (Cm Multi US Helper)
ucd gathering ok.

[03:24:16 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper) state at
entry:

Channel targeting:
Downstream:
fTargetDsFreqHz = 0 (0)
fCurrentDsFreqHz = 0x292fd2c0 (691000000)
fStoredDsFreqHz = 0x29020c00 (688000000)

Upstream:
fDestSingleTxTargetUsChanId = 0x1 (1)
fTargetingContext = 1 (ErrorRecovery)

Startup UCD Selection Info:

low priority candidate ucid list = 2 4 3 1 5 8 6 7


happy home ucid set = 1 2 3 4

Upstream Active Channel Settings:

ucid rpt enable sel prio MAP source dcid's


---- ---------- -------- -----------------
1 0x1c0 0
2 0x1c0 0
3 0x1c0 0
4 0x1c0 0
5 0x1c0 0
6 0x1c0 0
7 0x1c0 0
8 0x1c0 0

BcmCmUsTargetMset (a.k.a. usable UCDs gathered during startup):

us config
phy change ranging scdma
type ucid dcid count tried? enabled?
---- ---- ---- ------ ------- --------
3 1 21 4 n n
3 2 21 4 n n
3 3 21 4 n n
3 4 21 4 n n
3 5 21 4 n n
3 6 21 4 n n
3 7 21 4 n n
3 8 21 4 n n

[03:24:16 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper)
starting docs3 upstream initialization on target ucid=2
with upstream phy type 3 on hardware transmitter index 0

[03:24:16 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::ExecuteTccCmd: hwTxId=0


docs ucid=0
[03:24:16 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0
[03:24:16 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::InstallUsSets: Installing
UCD w/ucid for UCID=2 for CM hardware tx chan 0

[03:24:16 01/01/1970] [CmDocsisCtlThread]


BcmCmUsSetsState::TestAndLaunchUsTimeSync: starting upstream time sync
acquisition...
[03:24:16 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefOk: (Cm
Multi US Helper) target hwTxId=0
[03:24:16 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::UsTimeRefOk: upstream time
sync acquired for fHwTxId=0

== Beginning initial ranging for Docsis UCID 2 ==


Minimum transmit power is 17 dBmV
Maximum transmit power is 53 dBmV
Stored power level for UCID 2 is 38 dBmV
Using per transmitter stored initial upstream power = 38 dBmV hwTxId = 0 docsis
UCID = 2
RNG-RSP UsChanId=2 Adj: tim=1941 freq=2 Stat=Continue (CmdPwr (UsChanId-dBmV):
(2-40.50) )
[03:24:17 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0xc9
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (2-
41.00) )
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (2-
41.00) )
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (2-
41.00) )
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (2-
41.00) )
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Success (CmdPwr (UsChanId-dBmV): (2-
41.00) )
[03:24:22 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::FirstRngSuccess:
(CmDocsisCtlThread)
first RNG-RSP w/status==SUCCESS for hwTxId=0 and DOCSIS ucid=2
[03:24:22 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::LaunchEaeBpkm:
(CmDocsisCtlThread) BPKM enabled. starting Early Authentication and Encryption BPKM
key requests. Primary Sid = 201
CM/CM_Console> show ip

Index Name MAC address IP Address


1 CM fc:4a:e9:de:ad:88 not configured
6 EMTA fc:4a:e9:ec:93:05 not configured
2 LAN Private fc:4a:e9:de:ad:02 192.168.100.1
2 LAN Private fc:4a:e9:de:ad:02 fe80::fe4a:e9ff:fede:ad02/64
9 ITC0->RG fc:4a:e9:de:ad:11 172.31.255.45
9 ITC0->RG fc:4a:e9:de:ad:11 fe80::fe4a:e9ff:fede:ad11/64
9 ITC0->RG fc:4a:e9:de:ad:11 fe80::ffff:ac1f:ff2d/64
9 ITC0->RG fc:4a:e9:de:ad:11 fd00::ffff:ac1f:ff2d/64

CM/CM_Console> Bandwidth request failure! Status = 0

BcmCmUsChanTimerMuxACT::HandleEvent() @time=12452630 fTimerType=5


(kT4NoStationMaint) hwTxId=0 docs ucid=2
[03:27:32 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::T4NoStationMaintEvent: ERROR - no Station Maint map op error.
hwTxId=0 docs ucid=2
[03:27:32 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::CommonRngErrorHandler: reason=10 (T4NoStationMaintTimeout)
hwTxId=0 docs ucid=2
[03:27:32 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) Purging DS
frequency 691000000 from current scan pass due to pre-registration restart error
[03:27:32 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) reinit MAC #57:
T4NoStationMaintTimeout

[03:27:32 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::Reset:


(CmDocsisCtlThread) DefaultSnmpAgentClass::RestartPendingEvent for Vendor CM
Agent w/ BRCM Factory Support
Logging event: Received Response to Broadcast Maintenance Request, But no Unicast
Maintenance opportunities received - T4 time out;CM-MAC=fc:4a:e9:de:ad:88;CMTS-
MAC=28:52:61:fa:d8:78;CM-QOS=1.1;CM-VER=3.1;
Vendor CM Agent w/ BRCM Factory Support updating ifTableLastChange.
Vendor CM Agent w/ BRCM Factory Support resetting to default state.
Vendor CM Agent w/ BRCM Factory Support destroying users...
Vendor CM Agent w/ BRCM Factory Support destroying notifies...
Vendor CM Agent w/ BRCM Factory Support destroying views...
Allowing DOCS-CABLE-DEVICE-MIB IP filters.
Vendor CM Agent w/ BRCM Factory Support deferring traps.
Received RG Event 0x80000001 State 0x1
eRouter Linux WAN Down
[03:27:32 01/01/1970] [eRouterMsgPipe] eRouterMsgPipe::UpdateIpNetToMediaEntry:
(eRouterMsgPipe) eRouter IP address:0.0.0.0
03:27:32.920 01/01/1970 (CALC) mtaCmStatusInfo() - MTA is Signaled: *NOT-
OPERATIONAL* (Stat=0x1) emtaCurState = 0.
EmtaSnmpAgent::SoftReset
Pausing trap thread
emta factory agentResetting to default state.
emta factory agent destroying users...
emta factory agent destroying notifies...
emta factory agent destroying views...
emta factory agent entering RFC-2576 Coexistence security mode.
emta factory agent entering Basic/Hybrid flow provisioning mode.
Resuming trap thread
Stopping DHCP/ToD/TFTP (client requested)...
[03:27:32 01/01/1970] [CmDocsisIpThread] BcmEcosIpHalIf::RemoveIpv6Address: (IP
Stack1 HalIf) ERROR - Failed to remove IPv6 address fe80::fe4a:e9ff:fede:ad88/64
from the stack!
[03:27:33 01/01/1970] [CmDocsisIpThread] BcmDhcpV6ClientIf::ReleaseAddresses:
(DHCPv6 ClientIf for IP Stack1) ERROR - IA state is initial; there is no address to
release.
BcmDocsis3DsMacEnableMulticastDsidForwarding 0; primary DS = 0
SCQAM DSID filter control = 0x00
OFDM DSID filter control = 0x01
Deleting DOCSIS 1.0 CoS Settings for SID 0xc9
[03:27:33 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows:
(DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along
with associated Classifiers and PHS rules...
[03:27:33 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState:
(CmDocsisCtlThread)
[03:27:33 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Primary SID for usHwChannel 0 to 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 1
Updating US chan 8 data Profile test msg for Sid: 0x0.
Updating US chan 9 data Profile test msg for Sid: 0x0.
CM/CM_Console> [03:27:34 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL declared PULSE lost!
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=false
[03:27:34 01/01/1970] [CmDocsisCtlThread] BcmCmMultiDsHelper::PreRegDsChanChange:
target freq hz = 0
reason string = ErrorRecovery
CmInitReason = 16

Starting DS scanning...
[03:27:34 01/01/1970] [CmDocsisCtlThread] BcmCmDownstreamScan::StartScan: Starting
DS scan
Checking for cable cut...
CM/CM_Console> Plant power is 15.65

Cable connected

CM/CM_Console> Scanning 692.000 MHz SC-QAM (Annex A(Eu.1M))


Scanning 693.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 694.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 695.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 696.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 697.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 698.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 699.000 MHz SC-QAM (Annex A(Eu.1M)) locked SC-QAM
[03:27:37 01/01/1970] [CmDocsisCtlThread] BcmCmDsChan::DsLockOk: (BcmCmDsChan 0)
hwRxId=0 freq=0 dcid=0

******************************************
DOWNSTREAM STATUS
******************************************
HW Channel ID = 0
Phy type: SC-QAM
DS active chan settings:
ds chan id = 0
center freq, Hz = 699000000 Hz
primary capable = false
status event rpt bitmask = 0

CM HW Detected DS Phy Settings:


Center Freq, Hz = 699000000
QAM = Locked
FEC = Locked
Carrier Freq Offset, kHz = 0
Channel Width, Hz = 8000000
Modulation = Qam256
Interleaver = Taps12Incr17
Symbol Rate, sym/sec = 6952000

******************************************

[03:27:37 01/01/1970] [CmDocsisCtlThread]


BcmCmMacDomainSetsState::StartDsMacMddInit:
**********************************************
Waiting for MDDs...
**********************************************

BcmCmDocsisCtlMsgACT::HandleEvent() @time=12457830 event_code=4


(kCmPriDsMddSetsOk)
MDD diplexer band edge not specified.
MDD Plant US Frequency Range = extended.
Requested Spectrum = US:(0 MHz..85 MHz) DS:(0 MHz..0 MHz)
Best Match = 0: US:(5 MHz..85 MHz) DS:(108 MHz..1218 MHz)
Switchable diplexer ECN support disabled. NOT switching diplexer.
[03:27:37 01/01/1970] [CmDocsisCtlThread]
BcmCmMdDsSgDiscState::TrimSgSetWithoutThisDcid:
1 candidate MD-DS-SG remain after TrimSgSetWithoutThisDcid( target_dcid )
for target_dcid=0x16 (22)
[03:27:37 01/01/1970] [CmDocsisCtlThread] BcmCmMdDsSgDiscState::StartMdDsSgDisc:
special case: one and only one MD-DS-SG contains mdd_dcid.
fMdDsSgId=0x1d (29)
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , M-d++a+i-+Ty-eA+dA++e|:
i_L-ca+A++e|A: 1
Chec+ +D_A++e|A
Cha++e+ Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1

MD-DS-SG discovery info:

fCmMdDsSgDiscState = 6 (kMdDsSgDiscDone)
fMdDsSgId = 0x1d (29)
fMdDsSgDiscovered = true

Trimmed Candidate Downstream Service Group Settings List: list size = 1

sgid size member dcid's


---- ---- -------------
29 34 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
27 28 29 30 31 32 159 160

Downstream Active Channel Settings List:

dcid type frequency prim capable rpt enable mod/annex or PLC params
---- -------- --------- ------------ ---------- -----------------------
1 SC-QAM 531000000 y 0x36 256QAM/AnnexA
2 SC-QAM 539000000 y 0x36 256QAM/AnnexA
3 SC-QAM 547000000 y 0x36 256QAM/AnnexA
4 SC-QAM 555000000 y 0x36 256QAM/AnnexA
5 SC-QAM 563000000 y 0x36 256QAM/AnnexA
6 SC-QAM 571000000 y 0x36 256QAM/AnnexA
7 SC-QAM 579000000 y 0x36 256QAM/AnnexA
8 SC-QAM 587000000 y 0x36 256QAM/AnnexA
9 SC-QAM 595000000 y 0x36 256QAM/AnnexA
10 SC-QAM 603000000 y 0x36 256QAM/AnnexA
11 SC-QAM 611000000 y 0x36 256QAM/AnnexA
12 SC-QAM 619000000 y 0x36 256QAM/AnnexA
13 SC-QAM 627000000 y 0x36 256QAM/AnnexA
14 SC-QAM 635000000 y 0x36 256QAM/AnnexA
15 SC-QAM 643000000 y 0x36 256QAM/AnnexA
16 SC-QAM 651000000 y 0x36 256QAM/AnnexA
17 SC-QAM 659000000 y 0x36 256QAM/AnnexA
18 SC-QAM 667000000 y 0x36 256QAM/AnnexA
19 SC-QAM 675000000 y 0x36 256QAM/AnnexA
20 SC-QAM 683000000 y 0x36 256QAM/AnnexA
21 SC-QAM 691000000 y 0x36 256QAM/AnnexA
22 SC-QAM 699000000 y 0x36 256QAM/AnnexA
23 SC-QAM 707000000 y 0x36 256QAM/AnnexA
24 SC-QAM 715000000 y 0x36 256QAM/AnnexA
25 SC-QAM 723000000 y 0x36 256QAM/AnnexA
26 SC-QAM 731000000 y 0x36 256QAM/AnnexA
27 SC-QAM 739000000 y 0x36 256QAM/AnnexA
28 SC-QAM 747000000 y 0x36 256QAM/AnnexA
29 SC-QAM 755000000 y 0x36 256QAM/AnnexA
30 SC-QAM 763000000 y 0x36 256QAM/AnnexA
31 SC-QAM 771000000 y 0x36 256QAM/AnnexA
32 SC-QAM 779000000 y 0x36 256QAM/AnnexA
159 OFDM PLC 897000000 n 0x36 25Khz/5us/0.625us
160 OFDM PLC 361000000 n 0x36 50Khz/0.9375us/0.625us

Trimmed Downstream Ambiguity Resolution Frequency List: list size = 3

531000000-sc_qam 539000000-sc_qam 547000000-sc_qam

visible dcid set = 22

freq with visible dcid set = 699000000

BcmCmDocsisCtlMsgACT::HandleEvent() @time=12458420 event_code=11


(kCmMdDsSgDiscDone)
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=true
[03:27:38 01/01/1970] [CmDocsisCtlThread]
BcmDocsisCmHalIf::SetPrimaryDownstreamChannel: (DOCSIS CableModem HalIf)
Installing primary downstream channel index: 0
SetRatios called with primary downstream channel number = 0
AnnexMode[0] = 1 QAM_Mode[0] = 256
Num/Den = 869/1280
3390 SCDMA/OFDM mode - ChannelNumber = 0 Numerator = 869 Denominator = 1280
CM/CM_Console> [03:27:38 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL failed to acquire sync or lost sync!
... TCOFDM - DTR is now locked.... (T2=150ms Sync=14)

Given a 216 MHz TCOFDM clock, the nominal value for the DTR FCW is 0xC22E45067
The DTR FCW is 0xc22e973e - that value is good (6, within 100 ppm)
Kicked off the DPLL
LE Done bit was set
LE Done bit was set
SCQAM DS clock source.
PLL in Leaky mode.
PLL Fn = 6, k1 = 18, k2 = 19
[03:27:38 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context=1 (ErrorRecovery)
[03:27:38 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context is error recovery or startup.
Always use last good upstream target chan id=1
[03:27:38 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper) Locked on the downstream. Waiting for UCDs...
[03:27:38 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefFail: (Cm
Multi US Helper) target hwTxId=0
CM/CM_Console> [03:27:40 01/01/1970] [CmDocsisCtlThread]
BcmCmMultiUsHelper::TmUcdRxTimerEvent: (Cm Multi US Helper)
ucd gathering ok.

[03:27:40 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper) state at
entry:

Channel targeting:
Downstream:
fTargetDsFreqHz = 0 (0)
fCurrentDsFreqHz = 0x29a9e4c0 (699000000)
fStoredDsFreqHz = 0x29020c00 (688000000)

Upstream:
fDestSingleTxTargetUsChanId = 0x1 (1)
fTargetingContext = 1 (ErrorRecovery)

Startup UCD Selection Info:

low priority candidate ucid list = 4 2 1 3 7 8 6 5


happy home ucid set = 1 2 3 4

Upstream Active Channel Settings:

ucid rpt enable sel prio MAP source dcid's


---- ---------- -------- -----------------
1 0x1c0 0
2 0x1c0 0
3 0x1c0 0
4 0x1c0 0
5 0x1c0 0
6 0x1c0 0
7 0x1c0 0
8 0x1c0 0

BcmCmUsTargetMset (a.k.a. usable UCDs gathered during startup):

us config
phy change ranging scdma
type ucid dcid count tried? enabled?
---- ---- ---- ------ ------- --------
3 1 22 4 n n
3 2 22 4 n n
3 3 22 4 n n
3 4 22 4 n n
3 5 22 4 n n
3 6 22 4 n n
3 7 22 4 n n
3 8 22 4 n n

[03:27:40 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper)
starting docs3 upstream initialization on target ucid=4
with upstream phy type 3 on hardware transmitter index 0

[03:27:40 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::ExecuteTccCmd: hwTxId=0


docs ucid=0
[03:27:40 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0
[03:27:40 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::InstallUsSets: Installing
UCD w/ucid for UCID=4 for CM hardware tx chan 0

[03:27:40 01/01/1970] [CmDocsisCtlThread]


BcmCmUsSetsState::TestAndLaunchUsTimeSync: starting upstream time sync
acquisition...
[03:27:41 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefOk: (Cm
Multi US Helper) target hwTxId=0
[03:27:41 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::UsTimeRefOk: upstream time
sync acquired for fHwTxId=0

== Beginning initial ranging for Docsis UCID 4 ==


Minimum transmit power is 17 dBmV
Maximum transmit power is 53 dBmV
Stored power level for UCID 4 is 42 dBmV
Using per transmitter stored initial upstream power = 42 dBmV hwTxId = 0 docsis
UCID = 4
RNG-RSP UsChanId=4 Adj: tim=1954 freq=2 Stat=Continue (CmdPwr (UsChanId-dBmV):
(4-41.25) )
[03:27:41 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0xc9
RNG-RSP UsChanId=4 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (4-
41.75) )
RNG-RSP UsChanId=4 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (4-
41.75) )
RNG-RSP UsChanId=4 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (4-
41.25) )
RNG-RSP UsChanId=4 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (4-
41.75) )
RNG-RSP UsChanId=4 Adj: tim=0 freq=0 Stat=Success (CmdPwr (UsChanId-dBmV): (4-
41.25) )
[03:27:46 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::FirstRngSuccess:
(CmDocsisCtlThread)
first RNG-RSP w/status==SUCCESS for hwTxId=0 and DOCSIS ucid=4
[03:27:46 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::LaunchEaeBpkm:
(CmDocsisCtlThread) BPKM enabled. starting Early Authentication and Encryption BPKM
key requests. Primary Sid = 201
CM/CM_Console> Bandwidth request failure! Status = 0

BcmCmUsChanTimerMuxACT::HandleEvent() @time=12655890 fTimerType=5


(kT4NoStationMaint) hwTxId=0 docs ucid=4
[03:30:55 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::T4NoStationMaintEvent: ERROR - no Station Maint map op error.
hwTxId=0 docs ucid=4
[03:30:55 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::CommonRngErrorHandler: reason=10 (T4NoStationMaintTimeout)
hwTxId=0 docs ucid=4
[03:30:55 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) Purging DS
frequency 699000000 from current scan pass due to pre-registration restart error
[03:30:55 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) reinit MAC #58:
T4NoStationMaintTimeout

[03:30:55 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::Reset:


(CmDocsisCtlThread) DefaultSnmpAgentClass::RestartPendingEvent for Vendor CM
Agent w/ BRCM Factory Support
Logging event: Received Response to Broadcast Maintenance Request, But no Unicast
Maintenance opportunities received - T4 time out;CM-MAC=fc:4a:e9:de:ad:88;CMTS-
MAC=28:52:61:fa:d8:78;CM-QOS=1.1;CM-VER=3.1;
Vendor CM Agent w/ BRCM Factory Support updating ifTableLastChange.
Vendor CM Agent w/ BRCM Factory Support resetting to default state.
Vendor CM Agent w/ BRCM Factory Support destroying users...
Vendor CM Agent w/ BRCM Factory Support destroying notifies...
Vendor CM Agent w/ BRCM Factory Support destroying views...
Allowing DOCS-CABLE-DEVICE-MIB IP filters.
Vendor CM Agent w/ BRCM Factory Support deferring traps.
CM/CM_Console> Received RG Event 0x80000001 State 0x1
eRouter Linux WAN Down
[03:30:56 01/01/1970] [eRouterMsgPipe] eRouterMsgPipe::UpdateIpNetToMediaEntry:
(eRouterMsgPipe) eRouter IP address:0.0.0.0
03:30:56.180 01/01/1970 (CALC) mtaCmStatusInfo() - MTA is Signaled: *NOT-
OPERATIONAL* (Stat=0x1) emtaCurState = 0.
EmtaSnmpAgent::SoftReset
Pausing trap thread
emta factory agentResetting to default state.
emta factory agent destroying users...
emta factory agent destroying notifies...
emta factory agent destroying views...
emta factory agent entering RFC-2576 Coexistence security mode.
emta factory agent entering Basic/Hybrid flow provisioning mode.
Resuming trap thread
Stopping DHCP/ToD/TFTP (client requested)...
[03:30:56 01/01/1970] [CmDocsisIpThread] BcmEcosIpHalIf::RemoveIpv6Address: (IP
Stack1 HalIf) ERROR - Failed to remove IPv6 address fe80::fe4a:e9ff:fede:ad88/64
from the stack!
[03:30:56 01/01/1970] [CmDocsisIpThread] BcmDhcpV6ClientIf::ReleaseAddresses:
(DHCPv6 ClientIf for IP Stack1) ERROR - IA state is initial; there is no address to
release.
BcmDocsis3DsMacEnableMulticastDsidForwarding 0; primary DS = 0
SCQAM DSID filter control = 0x00
OFDM DSID filter control = 0x01
CM/CM_Console> Deleting DOCSIS 1.0 CoS Settings for SID 0xc9
[03:30:56 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows:
(DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along
with associated Classifiers and PHS rules...
[03:30:56 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState:
(CmDocsisCtlThread)
[03:30:56 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Primary SID for usHwChannel 0 to 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 1
Updating US chan 8 data Profile test msg for Sid: 0x0.
Updating US chan 9 data Profile test msg for Sid: 0x0.
CM/CM_Console> [03:30:57 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL declared PULSE lost!
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=false
[03:30:57 01/01/1970] [CmDocsisCtlThread] BcmCmMultiDsHelper::PreRegDsChanChange:
target freq hz = 0
reason string = ErrorRecovery
CmInitReason = 16

Starting DS scanning...
[03:30:57 01/01/1970] [CmDocsisCtlThread] BcmCmDownstreamScan::StartScan: Starting
DS scan
Checking for cable cut...

CM/CM_Console> Plant power is 15.65

Cable connected

Scanning 700.000 MHz SC-QAM (Annex A(Eu.1M))


CM/CM_Console> Scanning 701.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 702.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 703.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 704.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 705.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 706.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 707.000 MHz SC-QAM (Annex A(Eu.1M)) locked SC-QAM
[03:31:00 01/01/1970] [CmDocsisCtlThread] BcmCmDsChan::DsLockOk: (BcmCmDsChan 0)
hwRxId=0 freq=0 dcid=0

******************************************
DOWNSTREAM STATUS
******************************************
HW Channel ID = 0
Phy type: SC-QAM
DS active chan settings:
ds chan id = 0
center freq, Hz = 707000000 Hz
primary capable = false
status event rpt bitmask = 0

CM HW Detected DS Phy Settings:


Center Freq, Hz = 707000000
QAM = Locked
FEC = Locked
Carrier Freq Offset, kHz = 0
Channel Width, Hz = 8000000
Modulation = Qam256
Interleaver = Taps12Incr17
Symbol Rate, sym/sec = 6952000

******************************************

[03:31:00 01/01/1970] [CmDocsisCtlThread]


BcmCmMacDomainSetsState::StartDsMacMddInit:
**********************************************
Waiting for MDDs...
**********************************************

CM/CM_Console>
BcmCmDocsisCtlMsgACT::HandleEvent() @time=12661770 event_code=4
(kCmPriDsMddSetsOk)
MDD diplexer band edge not specified.
MDD Plant US Frequency Range = extended.
Requested Spectrum = US:(0 MHz..85 MHz) DS:(0 MHz..0 MHz)
Best Match = 0: US:(5 MHz..85 MHz) DS:(108 MHz..1218 MHz)
Switchable diplexer ECN support disabled. NOT switching diplexer.
[03:31:01 01/01/1970] [CmDocsisCtlThread]
BcmCmMdDsSgDiscState::TrimSgSetWithoutThisDcid:
1 candidate MD-DS-SG remain after TrimSgSetWithoutThisDcid( target_dcid )
for target_dcid=0x17 (23)
[03:31:01 01/01/1970] [CmDocsisCtlThread] BcmCmMdDsSgDiscState::StartMdDsSgDisc:
special case: one and only one MD-DS-SG contains mdd_dcid.
fMdDsSgId=0x1d (29)
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , M-d++a+i-+Ty-eA+dA++e|:
i_L-ca+A++e|A: 1
Chec+ +D_A++e|A
Cha++e+ Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1

MD-DS-SG discovery info:

fCmMdDsSgDiscState = 6 (kMdDsSgDiscDone)
fMdDsSgId = 0x1d (29)
fMdDsSgDiscovered = true

Trimmed Candidate Downstream Service Group Settings List: list size = 1

sgid size member dcid's


---- ---- -------------
29 34 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
27 28 29 30 31 32 159 160

Downstream Active Channel Settings List:

dcid type frequency prim capable rpt enable mod/annex or PLC params
---- -------- --------- ------------ ---------- -----------------------
1 SC-QAM 531000000 y 0x36 256QAM/AnnexA
2 SC-QAM 539000000 y 0x36 256QAM/AnnexA
3 SC-QAM 547000000 y 0x36 256QAM/AnnexA
4 SC-QAM 555000000 y 0x36 256QAM/AnnexA
5 SC-QAM 563000000 y 0x36 256QAM/AnnexA
6 SC-QAM 571000000 y 0x36 256QAM/AnnexA
7 SC-QAM 579000000 y 0x36 256QAM/AnnexA
8 SC-QAM 587000000 y 0x36 256QAM/AnnexA
9 SC-QAM 595000000 y 0x36 256QAM/AnnexA
10 SC-QAM 603000000 y 0x36 256QAM/AnnexA
11 SC-QAM 611000000 y 0x36 256QAM/AnnexA
12 SC-QAM 619000000 y 0x36 256QAM/AnnexA
13 SC-QAM 627000000 y 0x36 256QAM/AnnexA
14 SC-QAM 635000000 y 0x36 256QAM/AnnexA
15 SC-QAM 643000000 y 0x36 256QAM/AnnexA
16 SC-QAM 651000000 y 0x36 256QAM/AnnexA
17 SC-QAM 659000000 y 0x36 256QAM/AnnexA
18 SC-QAM 667000000 y 0x36 256QAM/AnnexA
19 SC-QAM 675000000 y 0x36 256QAM/AnnexA
20 SC-QAM 683000000 y 0x36 256QAM/AnnexA
21 SC-QAM 691000000 y 0x36 256QAM/AnnexA
22 SC-QAM 699000000 y 0x36 256QAM/AnnexA
23 SC-QAM 707000000 y 0x36 256QAM/AnnexA
24 SC-QAM 715000000 y 0x36 256QAM/AnnexA
25 SC-QAM 723000000 y 0x36 256QAM/AnnexA
26 SC-QAM 731000000 y 0x36 256QAM/AnnexA
27 SC-QAM 739000000 y 0x36 256QAM/AnnexA
28 SC-QAM 747000000 y 0x36 256QAM/AnnexA
29 SC-QAM 755000000 y 0x36 256QAM/AnnexA
30 SC-QAM 763000000 y 0x36 256QAM/AnnexA
31 SC-QAM 771000000 y 0x36 256QAM/AnnexA
32 SC-QAM 779000000 y 0x36 256QAM/AnnexA
159 OFDM PLC 897000000 n 0x36 25Khz/5us/0.625us
160 OFDM PLC 361000000 n 0x36 50Khz/0.9375us/0.625us

Trimmed Downstream Ambiguity Resolution Frequency List: list size = 3

531000000-sc_qam 539000000-sc_qam 547000000-sc_qam

visible dcid set = 23

freq with visible dcid set = 707000000

BcmCmDocsisCtlMsgACT::HandleEvent() @time=12662370 event_code=11


(kCmMdDsSgDiscDone)
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=true
[03:31:02 01/01/1970] [CmDocsisCtlThread]
BcmDocsisCmHalIf::SetPrimaryDownstreamChannel: (DOCSIS CableModem HalIf)
Installing primary downstream channel index: 0
SetRatios called with primary downstream channel number = 0
AnnexMode[0] = 1 QAM_Mode[0] = 256
Num/Den = 869/1280
3390 SCDMA/OFDM mode - ChannelNumber = 0 Numerator = 869 Denominator = 1280
CM/CM_Console> [03:31:02 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL failed to acquire sync or lost sync!
... TCOFDM - DTR is now locked.... (T2=150ms Sync=14)

Given a 216 MHz TCOFDM clock, the nominal value for the DTR FCW is 0xC22E45067
The DTR FCW is 0xc22eaa75 - that value is good (7, within 100 ppm)
Kicked off the DPLL
LE Done bit was set
LE Done bit was set
SCQAM DS clock source.
PLL in Leaky mode.
PLL Fn = 6, k1 = 18, k2 = 19
[03:31:02 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context=1 (ErrorRecovery)
[03:31:02 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context is error recovery or startup.
Always use last good upstream target chan id=1
[03:31:02 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper) Locked on the downstream. Waiting for UCDs...
[03:31:02 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefFail: (Cm
Multi US Helper) target hwTxId=0
CM/CM_Console> [03:31:04 01/01/1970] [CmDocsisCtlThread]
BcmCmMultiUsHelper::TmUcdRxTimerEvent: (Cm Multi US Helper)
ucd gathering ok.

[03:31:04 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper) state at
entry:

Channel targeting:
Downstream:
fTargetDsFreqHz = 0 (0)
fCurrentDsFreqHz = 0x2a23f6c0 (707000000)
fStoredDsFreqHz = 0x29020c00 (688000000)

Upstream:
fDestSingleTxTargetUsChanId = 0x1 (1)
fTargetingContext = 1 (ErrorRecovery)

Startup UCD Selection Info:

low priority candidate ucid list = 1 3 4 2 7 8 5 6


happy home ucid set = 1 2 3 4

Upstream Active Channel Settings:

ucid rpt enable sel prio MAP source dcid's


---- ---------- -------- -----------------
1 0x1c0 0
2 0x1c0 0
3 0x1c0 0
4 0x1c0 0
5 0x1c0 0
6 0x1c0 0
7 0x1c0 0
8 0x1c0 0

BcmCmUsTargetMset (a.k.a. usable UCDs gathered during startup):

us config
phy change ranging scdma
type ucid dcid count tried? enabled?
---- ---- ---- ------ ------- --------
3 1 23 4 n n
3 2 23 4 n n
3 3 23 4 n n
3 4 23 4 n n
3 5 23 4 n n
3 6 23 4 n n
3 7 23 4 n n
3 8 23 4 n n

[03:31:04 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper)
starting docs3 upstream initialization on target ucid=1
with upstream phy type 3 on hardware transmitter index 0

[03:31:04 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::ExecuteTccCmd: hwTxId=0


docs ucid=0
[03:31:04 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0
[03:31:04 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::InstallUsSets: Installing
UCD w/ucid for UCID=1 for CM hardware tx chan 0

[03:31:04 01/01/1970] [CmDocsisCtlThread]


BcmCmUsSetsState::TestAndLaunchUsTimeSync: starting upstream time sync
acquisition...
[03:31:04 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefOk: (Cm
Multi US Helper) target hwTxId=0
[03:31:04 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::UsTimeRefOk: upstream time
sync acquired for fHwTxId=0

== Beginning initial ranging for Docsis UCID 1 ==


Minimum transmit power is 17 dBmV
Maximum transmit power is 53 dBmV
Stored power level for UCID 1 is 39 dBmV
Using per transmitter stored initial upstream power = 39 dBmV hwTxId = 0 docsis
UCID = 1
RNG-RSP UsChanId=1 Adj: tim=1934 freq=34 Stat=Continue (CmdPwr (UsChanId-dBmV):
(1-41.25) )
[03:31:05 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0xc9
RNG-RSP UsChanId=1 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (1-
41.25) )
RNG-RSP UsChanId=1 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (1-
41.25) )
RNG-RSP UsChanId=1 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (1-
41.25) )
RNG-RSP UsChanId=1 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (1-
41.25) )
RNG-RSP UsChanId=1 Adj: tim=0 freq=0 Stat=Success (CmdPwr (UsChanId-dBmV): (1-
41.25) )
[03:31:10 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::FirstRngSuccess:
(CmDocsisCtlThread)
first RNG-RSP w/status==SUCCESS for hwTxId=0 and DOCSIS ucid=1
[03:31:10 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::LaunchEaeBpkm:
(CmDocsisCtlThread) BPKM enabled. starting Early Authentication and Encryption BPKM
key requests. Primary Sid = 201
CM/CM_Console> Bandwidth request failure! Status = 0

BcmCmUsChanTimerMuxACT::HandleEvent() @time=12860430 fTimerType=5


(kT4NoStationMaint) hwTxId=0 docs ucid=1
[03:34:20 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::T4NoStationMaintEvent: ERROR - no Station Maint map op error.
hwTxId=0 docs ucid=1
[03:34:20 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::CommonRngErrorHandler: reason=10 (T4NoStationMaintTimeout)
hwTxId=0 docs ucid=1
[03:34:20 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) Purging DS
frequency 707000000 from current scan pass due to pre-registration restart error
[03:34:20 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) reinit MAC #59:
T4NoStationMaintTimeout

[03:34:20 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::Reset:


(CmDocsisCtlThread) DefaultSnmpAgentClass::RestartPendingEvent for Vendor CM
Agent w/ BRCM Factory Support
Logging event: Received Response to Broadcast Maintenance Request, But no Unicast
Maintenance opportunities received - T4 time out;CM-MAC=fc:4a:e9:de:ad:88;CMTS-
MAC=28:52:61:fa:d8:78;CM-QOS=1.1;CM-VER=3.1;
Vendor CM Agent w/ BRCM Factory Support updating ifTableLastChange.
Vendor CM Agent w/ BRCM Factory Support resetting to default state.
Vendor CM Agent w/ BRCM Factory Support destroying users...
Vendor CM Agent w/ BRCM Factory Support destroying notifies...
Vendor CM Agent w/ BRCM Factory Support destroying views...
Allowing DOCS-CABLE-DEVICE-MIB IP filters.
Vendor CM Agent w/ BRCM Factory Support deferring traps.
CM/CM_Console> Received RG Event 0x80000001 State 0x1
eRouter Linux WAN Down
[03:34:20 01/01/1970] [eRouterMsgPipe] eRouterMsgPipe::UpdateIpNetToMediaEntry:
(eRouterMsgPipe) eRouter IP address:0.0.0.0
03:34:20.720 01/01/1970 (CALC) mtaCmStatusInfo() - MTA is Signaled: *NOT-
OPERATIONAL* (Stat=0x1) emtaCurState = 0.
EmtaSnmpAgent::SoftReset
Pausing trap thread
emta factory agentResetting to default state.
emta factory agent destroying users...
emta factory agent destroying notifies...
emta factory agent destroying views...
emta factory agent entering RFC-2576 Coexistence security mode.
emta factory agent entering Basic/Hybrid flow provisioning mode.
Resuming trap thread
Stopping DHCP/ToD/TFTP (client requested)...
[03:34:20 01/01/1970] [CmDocsisIpThread] BcmEcosIpHalIf::RemoveIpv6Address: (IP
Stack1 HalIf) ERROR - Failed to remove IPv6 address fe80::fe4a:e9ff:fede:ad88/64
from the stack!
[03:34:20 01/01/1970] [CmDocsisIpThread] BcmDhcpV6ClientIf::ReleaseAddresses:
(DHCPv6 ClientIf for IP Stack1) ERROR - IA state is initial; there is no address to
release.
BcmDocsis3DsMacEnableMulticastDsidForwarding 0; primary DS = 0
SCQAM DSID filter control = 0x00
OFDM DSID filter control = 0x01
CM/CM_Console> Deleting DOCSIS 1.0 CoS Settings for SID 0xc9
[03:34:21 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows:
(DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along
with associated Classifiers and PHS rules...
[03:34:21 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState:
(CmDocsisCtlThread)
[03:34:21 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Primary SID for usHwChannel 0 to 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 1
Updating US chan 8 data Profile test msg for Sid: 0x0.
Updating US chan 9 data Profile test msg for Sid: 0x0.
CM/CM_Console> [03:34:21 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL declared PULSE lost!
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=false
[03:34:21 01/01/1970] [CmDocsisCtlThread] BcmCmMultiDsHelper::PreRegDsChanChange:
target freq hz = 0
reason string = ErrorRecovery
CmInitReason = 16

Starting DS scanning...
[03:34:21 01/01/1970] [CmDocsisCtlThread] BcmCmDownstreamScan::StartScan: Starting
DS scan
Checking for cable cut...

CM/CM_Console> Plant power is 15.55

Cable connected

CM/CM_Console> Scanning 708.000 MHz SC-QAM (Annex A(Eu.1M))


Scanning 709.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 710.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 711.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 712.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 713.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 714.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 715.000 MHz SC-QAM (Annex A(Eu.1M)) locked SC-QAM
[03:34:24 01/01/1970] [CmDocsisCtlThread] BcmCmDsChan::DsLockOk: (BcmCmDsChan 0)
hwRxId=0 freq=0 dcid=0

******************************************
DOWNSTREAM STATUS
******************************************
HW Channel ID = 0
Phy type: SC-QAM
DS active chan settings:
ds chan id = 0
center freq, Hz = 715000000 Hz
primary capable = false
status event rpt bitmask = 0

CM HW Detected DS Phy Settings:


Center Freq, Hz = 715000000
QAM = Locked
FEC = Locked
Carrier Freq Offset, kHz = 0
Channel Width, Hz = 8000000
Modulation = Qam256
Interleaver = Taps12Incr17
Symbol Rate, sym/sec = 6952000

******************************************

[03:34:25 01/01/1970] [CmDocsisCtlThread]


BcmCmMacDomainSetsState::StartDsMacMddInit:
**********************************************
Waiting for MDDs...
**********************************************

CM/CM_Console>
BcmCmDocsisCtlMsgACT::HandleEvent() @time=12865770 event_code=4
(kCmPriDsMddSetsOk)
MDD diplexer band edge not specified.
MDD Plant US Frequency Range = extended.
Requested Spectrum = US:(0 MHz..85 MHz) DS:(0 MHz..0 MHz)
Best Match = 0: US:(5 MHz..85 MHz) DS:(108 MHz..1218 MHz)
Switchable diplexer ECN support disabled. NOT switching diplexer.
[03:34:25 01/01/1970] [CmDocsisCtlThread]
BcmCmMdDsSgDiscState::TrimSgSetWithoutThisDcid:
1 candidate MD-DS-SG remain after TrimSgSetWithoutThisDcid( target_dcid )
for target_dcid=0x18 (24)
[03:34:25 01/01/1970] [CmDocsisCtlThread] BcmCmMdDsSgDiscState::StartMdDsSgDisc:
special case: one and only one MD-DS-SG contains mdd_dcid.
fMdDsSgId=0x1d (29)
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , M-d++a+i-+Ty-eA+dA++e|:
i_L-ca+A++e|A: 1
Chec+ +D_A++e|A
Cha++e+ Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1

MD-DS-SG discovery info:

fCmMdDsSgDiscState = 6 (kMdDsSgDiscDone)
fMdDsSgId = 0x1d (29)
fMdDsSgDiscovered = true

Trimmed Candidate Downstream Service Group Settings List: list size = 1

sgid size member dcid's


---- ---- -------------
29 34 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
27 28 29 30 31 32 159 160

Downstream Active Channel Settings List:

dcid type frequency prim capable rpt enable mod/annex or PLC params
---- -------- --------- ------------ ---------- -----------------------
1 SC-QAM 531000000 y 0x36 256QAM/AnnexA
2 SC-QAM 539000000 y 0x36 256QAM/AnnexA
3 SC-QAM 547000000 y 0x36 256QAM/AnnexA
4 SC-QAM 555000000 y 0x36 256QAM/AnnexA
5 SC-QAM 563000000 y 0x36 256QAM/AnnexA
6 SC-QAM 571000000 y 0x36 256QAM/AnnexA
7 SC-QAM 579000000 y 0x36 256QAM/AnnexA
8 SC-QAM 587000000 y 0x36 256QAM/AnnexA
9 SC-QAM 595000000 y 0x36 256QAM/AnnexA
10 SC-QAM 603000000 y 0x36 256QAM/AnnexA
11 SC-QAM 611000000 y 0x36 256QAM/AnnexA
12 SC-QAM 619000000 y 0x36 256QAM/AnnexA
13 SC-QAM 627000000 y 0x36 256QAM/AnnexA
14 SC-QAM 635000000 y 0x36 256QAM/AnnexA
15 SC-QAM 643000000 y 0x36 256QAM/AnnexA
16 SC-QAM 651000000 y 0x36 256QAM/AnnexA
17 SC-QAM 659000000 y 0x36 256QAM/AnnexA
18 SC-QAM 667000000 y 0x36 256QAM/AnnexA
19 SC-QAM 675000000 y 0x36 256QAM/AnnexA
20 SC-QAM 683000000 y 0x36 256QAM/AnnexA
21 SC-QAM 691000000 y 0x36 256QAM/AnnexA
22 SC-QAM 699000000 y 0x36 256QAM/AnnexA
23 SC-QAM 707000000 y 0x36 256QAM/AnnexA
24 SC-QAM 715000000 y 0x36 256QAM/AnnexA
25 SC-QAM 723000000 y 0x36 256QAM/AnnexA
26 SC-QAM 731000000 y 0x36 256QAM/AnnexA
27 SC-QAM 739000000 y 0x36 256QAM/AnnexA
28 SC-QAM 747000000 y 0x36 256QAM/AnnexA
29 SC-QAM 755000000 y 0x36 256QAM/AnnexA
30 SC-QAM 763000000 y 0x36 256QAM/AnnexA
31 SC-QAM 771000000 y 0x36 256QAM/AnnexA
32 SC-QAM 779000000 y 0x36 256QAM/AnnexA
159 OFDM PLC 897000000 n 0x36 25Khz/5us/0.625us
160 OFDM PLC 361000000 n 0x36 50Khz/0.9375us/0.625us

Trimmed Downstream Ambiguity Resolution Frequency List: list size = 3

531000000-sc_qam 539000000-sc_qam 547000000-sc_qam

visible dcid set = 24

freq with visible dcid set = 715000000


BcmCmDocsisCtlMsgACT::HandleEvent() @time=12866370 event_code=11
(kCmMdDsSgDiscDone)
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=true
[03:34:26 01/01/1970] [CmDocsisCtlThread]
BcmDocsisCmHalIf::SetPrimaryDownstreamChannel: (DOCSIS CableModem HalIf)
Installing primary downstream channel index: 0
SetRatios called with primary downstream channel number = 0
AnnexMode[0] = 1 QAM_Mode[0] = 256
Num/Den = 869/1280
3390 SCDMA/OFDM mode - ChannelNumber = 0 Numerator = 869 Denominator = 1280
CM/CM_Console> [03:34:26 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL failed to acquire sync or lost sync!
... TCOFDM - DTR is now locked.... (T2=150ms Sync=14)

Given a 216 MHz TCOFDM clock, the nominal value for the DTR FCW is 0xC22E45067
The DTR FCW is 0xc22eaa75 - that value is good (7, within 100 ppm)
Kicked off the DPLL
LE Done bit was set
LE Done bit was set
SCQAM DS clock source.
PLL in Leaky mode.
PLL Fn = 6, k1 = 18, k2 = 19
[03:34:26 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context=1 (ErrorRecovery)
[03:34:26 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context is error recovery or startup.
Always use last good upstream target chan id=1
[03:34:26 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper) Locked on the downstream. Waiting for UCDs...
[03:34:26 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefFail: (Cm
Multi US Helper) target hwTxId=0
CM/CM_Console> [03:34:28 01/01/1970] [CmDocsisCtlThread]
BcmCmMultiUsHelper::TmUcdRxTimerEvent: (Cm Multi US Helper)
ucd gathering ok.

[03:34:28 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper) state at
entry:

Channel targeting:
Downstream:
fTargetDsFreqHz = 0 (0)
fCurrentDsFreqHz = 0x2a9e08c0 (715000000)
fStoredDsFreqHz = 0x29020c00 (688000000)

Upstream:
fDestSingleTxTargetUsChanId = 0x1 (1)
fTargetingContext = 1 (ErrorRecovery)

Startup UCD Selection Info:

low priority candidate ucid list = 4 2 1 3 6 7 8 5


happy home ucid set = 1 2 3 4

Upstream Active Channel Settings:

ucid rpt enable sel prio MAP source dcid's


---- ---------- -------- -----------------
1 0x1c0 0
2 0x1c0 0
3 0x1c0 0
4 0x1c0 0
5 0x1c0 0
6 0x1c0 0
7 0x1c0 0
8 0x1c0 0

BcmCmUsTargetMset (a.k.a. usable UCDs gathered during startup):

us config
phy change ranging scdma
type ucid dcid count tried? enabled?
---- ---- ---- ------ ------- --------
3 1 24 4 n n
3 2 24 4 n n
3 3 24 4 n n
3 4 24 4 n n
3 5 24 4 n n
3 6 24 4 n n
3 7 24 4 n n
3 8 24 4 n n

[03:34:28 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper)
starting docs3 upstream initialization on target ucid=4
with upstream phy type 3 on hardware transmitter index 0

[03:34:28 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::ExecuteTccCmd: hwTxId=0


docs ucid=0
[03:34:28 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0
[03:34:28 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::InstallUsSets: Installing
UCD w/ucid for UCID=4 for CM hardware tx chan 0

[03:34:28 01/01/1970] [CmDocsisCtlThread]


BcmCmUsSetsState::TestAndLaunchUsTimeSync: starting upstream time sync
acquisition...
[03:34:28 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefOk: (Cm
Multi US Helper) target hwTxId=0
[03:34:28 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::UsTimeRefOk: upstream time
sync acquired for fHwTxId=0

== Beginning initial ranging for Docsis UCID 4 ==


Minimum transmit power is 17 dBmV
Maximum transmit power is 53 dBmV
Stored power level for UCID 4 is 42 dBmV
Using per transmitter stored initial upstream power = 42 dBmV hwTxId = 0 docsis
UCID = 4
RNG-RSP UsChanId=4 Adj: tim=1969 freq=-31 Stat=Continue (CmdPwr (UsChanId-dBmV):
(4-41.75) )
[03:34:29 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0xc9
RNG-RSP UsChanId=4 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (4-
41.25) )
RNG-RSP UsChanId=4 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (4-
41.75) )
RNG-RSP UsChanId=4 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (4-
41.25) )
RNG-RSP UsChanId=4 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (4-
41.75) )
RNG-RSP UsChanId=4 Adj: tim=0 freq=0 Stat=Success (CmdPwr (UsChanId-dBmV): (4-
41.25) )
[03:34:34 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::FirstRngSuccess:
(CmDocsisCtlThread)
first RNG-RSP w/status==SUCCESS for hwTxId=0 and DOCSIS ucid=4
[03:34:34 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::LaunchEaeBpkm:
(CmDocsisCtlThread) BPKM enabled. starting Early Authentication and Encryption BPKM
key requests. Primary Sid = 201
CM/CM_Console> Bandwidth request failure! Status = 0

BcmCmUsChanTimerMuxACT::HandleEvent() @time=13064210 fTimerType=5


(kT4NoStationMaint) hwTxId=0 docs ucid=4
[03:37:44 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::T4NoStationMaintEvent: ERROR - no Station Maint map op error.
hwTxId=0 docs ucid=4
[03:37:44 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::CommonRngErrorHandler: reason=10 (T4NoStationMaintTimeout)
hwTxId=0 docs ucid=4
[03:37:44 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) Purging DS
frequency 715000000 from current scan pass due to pre-registration restart error
[03:37:44 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) reinit MAC #60:
T4NoStationMaintTimeout

[03:37:44 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::Reset:


(CmDocsisCtlThread) DefaultSnmpAgentClass::RestartPendingEvent for Vendor CM
Agent w/ BRCM Factory Support
Logging event: Received Response to Broadcast Maintenance Request, But no Unicast
Maintenance opportunities received - T4 time out;CM-MAC=fc:4a:e9:de:ad:88;CMTS-
MAC=28:52:61:fa:d8:78;CM-QOS=1.1;CM-VER=3.1;
Vendor CM Agent w/ BRCM Factory Support updating ifTableLastChange.
Vendor CM Agent w/ BRCM Factory Support resetting to default state.
Vendor CM Agent w/ BRCM Factory Support destroying users...
Vendor CM Agent w/ BRCM Factory Support destroying notifies...
Vendor CM Agent w/ BRCM Factory Support destroying views...
Allowing DOCS-CABLE-DEVICE-MIB IP filters.
Vendor CM Agent w/ BRCM Factory Support deferring traps.
Received RG Event 0x80000001 State 0x1
eRouter Linux WAN Down
[03:37:44 01/01/1970] [eRouterMsgPipe] eRouterMsgPipe::UpdateIpNetToMediaEntry:
(eRouterMsgPipe) eRouter IP address:0.0.0.0
03:37:44.500 01/01/1970 (CALC) mtaCmStatusInfo() - MTA is Signaled: *NOT-
OPERATIONAL* (Stat=0x1) emtaCurState = 0.
EmtaSnmpAgent::SoftReset
Pausing trap thread
emta factory agentResetting to default state.
emta factory agent destroying users...
emta factory agent destroying notifies...
emta factory agent destroying views...
emta factory agent entering RFC-2576 Coexistence security mode.
emta factory agent entering Basic/Hybrid flow provisioning mode.
Resuming trap thread
Stopping DHCP/ToD/TFTP (client requested)...
[03:37:44 01/01/1970] [CmDocsisIpThread] BcmEcosIpHalIf::RemoveIpv6Address: (IP
Stack1 HalIf) ERROR - Failed to remove IPv6 address fe80::fe4a:e9ff:fede:ad88/64
from the stack!
[03:37:44 01/01/1970] [CmDocsisIpThread] BcmDhcpV6ClientIf::ReleaseAddresses:
(DHCPv6 ClientIf for IP Stack1) ERROR - IA state is initial; there is no address to
release.
BcmDocsis3DsMacEnableMulticastDsidForwarding 0; primary DS = 0
SCQAM DSID filter control = 0x00
OFDM DSID filter control = 0x01
Deleting DOCSIS 1.0 CoS Settings for SID 0xc9
[03:37:44 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows:
(DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along
with associated Classifiers and PHS rules...
[03:37:44 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState:
(CmDocsisCtlThread)
[03:37:44 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Primary SID for usHwChannel 0 to 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 1
Updating US chan 8 data Profile test msg for Sid: 0x0.
Updating US chan 9 data Profile test msg for Sid: 0x0.
CM/CM_Console> [03:37:45 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL declared PULSE lost!
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=false
[03:37:45 01/01/1970] [CmDocsisCtlThread] BcmCmMultiDsHelper::PreRegDsChanChange:
target freq hz = 0
reason string = ErrorRecovery
CmInitReason = 16

Starting DS scanning...
[03:37:45 01/01/1970] [CmDocsisCtlThread] BcmCmDownstreamScan::StartScan: Starting
DS scan
Checking for cable cut...

CM/CM_Console> Plant power is 15.55

Cable connected

CM/CM_Console> Scanning 716.000 MHz SC-QAM (Annex A(Eu.1M))


Scanning 717.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 718.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 719.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 720.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 721.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 722.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 723.000 MHz SC-QAM (Annex A(Eu.1M)) locked SC-QAM
[03:37:48 01/01/1970] [CmDocsisCtlThread] BcmCmDsChan::DsLockOk: (BcmCmDsChan 0)
hwRxId=0 freq=0 dcid=0

******************************************
DOWNSTREAM STATUS
******************************************
HW Channel ID = 0
Phy type: SC-QAM
DS active chan settings:
ds chan id = 0
center freq, Hz = 723000000 Hz
primary capable = false
status event rpt bitmask = 0

CM HW Detected DS Phy Settings:


Center Freq, Hz = 723000000
QAM = Locked
FEC = Locked
Carrier Freq Offset, kHz = 0
Channel Width, Hz = 8000000
Modulation = Qam256
Interleaver = Taps12Incr17
Symbol Rate, sym/sec = 6952000

******************************************

[03:37:48 01/01/1970] [CmDocsisCtlThread]


BcmCmMacDomainSetsState::StartDsMacMddInit:
**********************************************
Waiting for MDDs...
**********************************************

CM/CM_Console>
BcmCmDocsisCtlMsgACT::HandleEvent() @time=13069770 event_code=4
(kCmPriDsMddSetsOk)
MDD diplexer band edge not specified.
MDD Plant US Frequency Range = extended.
Requested Spectrum = US:(0 MHz..85 MHz) DS:(0 MHz..0 MHz)
Best Match = 0: US:(5 MHz..85 MHz) DS:(108 MHz..1218 MHz)
Switchable diplexer ECN support disabled. NOT switching diplexer.
[03:37:49 01/01/1970] [CmDocsisCtlThread]
BcmCmMdDsSgDiscState::TrimSgSetWithoutThisDcid:
1 candidate MD-DS-SG remain after TrimSgSetWithoutThisDcid( target_dcid )
for target_dcid=0x19 (25)
[03:37:49 01/01/1970] [CmDocsisCtlThread] BcmCmMdDsSgDiscState::StartMdDsSgDisc:
special case: one and only one MD-DS-SG contains mdd_dcid.
fMdDsSgId=0x1d (29)
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , M-d++a+i-+Ty-eA+dA++e|:
i_L-ca+A++e|A: 1
Chec+ +D_A++e|A
Cha++e+ Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1

MD-DS-SG discovery info:

fCmMdDsSgDiscState = 6 (kMdDsSgDiscDone)
fMdDsSgId = 0x1d (29)
fMdDsSgDiscovered = true

Trimmed Candidate Downstream Service Group Settings List: list size = 1

sgid size member dcid's


---- ---- -------------
29 34 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
27 28 29 30 31 32 159 160

Downstream Active Channel Settings List:

dcid type frequency prim capable rpt enable mod/annex or PLC params
---- -------- --------- ------------ ---------- -----------------------
1 SC-QAM 531000000 y 0x36 256QAM/AnnexA
2 SC-QAM 539000000 y 0x36 256QAM/AnnexA
3 SC-QAM 547000000 y 0x36 256QAM/AnnexA
4 SC-QAM 555000000 y 0x36 256QAM/AnnexA
5 SC-QAM 563000000 y 0x36 256QAM/AnnexA
6 SC-QAM 571000000 y 0x36 256QAM/AnnexA
7 SC-QAM 579000000 y 0x36 256QAM/AnnexA
8 SC-QAM 587000000 y 0x36 256QAM/AnnexA
9 SC-QAM 595000000 y 0x36 256QAM/AnnexA
10 SC-QAM 603000000 y 0x36 256QAM/AnnexA
11 SC-QAM 611000000 y 0x36 256QAM/AnnexA
12 SC-QAM 619000000 y 0x36 256QAM/AnnexA
13 SC-QAM 627000000 y 0x36 256QAM/AnnexA
14 SC-QAM 635000000 y 0x36 256QAM/AnnexA
15 SC-QAM 643000000 y 0x36 256QAM/AnnexA
16 SC-QAM 651000000 y 0x36 256QAM/AnnexA
17 SC-QAM 659000000 y 0x36 256QAM/AnnexA
18 SC-QAM 667000000 y 0x36 256QAM/AnnexA
19 SC-QAM 675000000 y 0x36 256QAM/AnnexA
20 SC-QAM 683000000 y 0x36 256QAM/AnnexA
21 SC-QAM 691000000 y 0x36 256QAM/AnnexA
22 SC-QAM 699000000 y 0x36 256QAM/AnnexA
23 SC-QAM 707000000 y 0x36 256QAM/AnnexA
24 SC-QAM 715000000 y 0x36 256QAM/AnnexA
25 SC-QAM 723000000 y 0x36 256QAM/AnnexA
26 SC-QAM 731000000 y 0x36 256QAM/AnnexA
27 SC-QAM 739000000 y 0x36 256QAM/AnnexA
28 SC-QAM 747000000 y 0x36 256QAM/AnnexA
29 SC-QAM 755000000 y 0x36 256QAM/AnnexA
30 SC-QAM 763000000 y 0x36 256QAM/AnnexA
31 SC-QAM 771000000 y 0x36 256QAM/AnnexA
32 SC-QAM 779000000 y 0x36 256QAM/AnnexA
159 OFDM PLC 897000000 n 0x36 25Khz/5us/0.625us
160 OFDM PLC 361000000 n 0x36 50Khz/0.9375us/0.625us

Trimmed Downstream Ambiguity Resolution Frequency List: list size = 3

531000000-sc_qam 539000000-sc_qam 547000000-sc_qam

visible dcid set = 25

freq with visible dcid set = 723000000

BcmCmDocsisCtlMsgACT::HandleEvent() @time=13070370 event_code=11


(kCmMdDsSgDiscDone)
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=true
[03:37:50 01/01/1970] [CmDocsisCtlThread]
BcmDocsisCmHalIf::SetPrimaryDownstreamChannel: (DOCSIS CableModem HalIf)
Installing primary downstream channel index: 0
SetRatios called with primary downstream channel number = 0
AnnexMode[0] = 1 QAM_Mode[0] = 256
Num/Den = 869/1280
3390 SCDMA/OFDM mode - ChannelNumber = 0 Numerator = 869 Denominator = 1280
CM/CM_Console> [03:37:50 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL failed to acquire sync or lost sync!
... TCOFDM - DTR is now locked.... (T2=150ms Sync=14)

Given a 216 MHz TCOFDM clock, the nominal value for the DTR FCW is 0xC22E45067
The DTR FCW is 0xc22e9011 - that value is good (5, within 100 ppm)
Kicked off the DPLL
LE Done bit was set
LE Done bit was set
SCQAM DS clock source.
PLL in Leaky mode.
PLL Fn = 6, k1 = 18, k2 = 19
[03:37:50 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context=1 (ErrorRecovery)
[03:37:50 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context is error recovery or startup.
Always use last good upstream target chan id=1
[03:37:50 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper) Locked on the downstream. Waiting for UCDs...
[03:37:50 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefFail: (Cm
Multi US Helper) target hwTxId=0
CM/CM_Console> [03:37:52 01/01/1970] [CmDocsisCtlThread]
BcmCmMultiUsHelper::TmUcdRxTimerEvent: (Cm Multi US Helper)
ucd gathering ok.

[03:37:52 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper) state at
entry:

Channel targeting:
Downstream:
fTargetDsFreqHz = 0 (0)
fCurrentDsFreqHz = 0x2b181ac0 (723000000)
fStoredDsFreqHz = 0x29020c00 (688000000)

Upstream:
fDestSingleTxTargetUsChanId = 0x1 (1)
fTargetingContext = 1 (ErrorRecovery)

Startup UCD Selection Info:

low priority candidate ucid list = 4 1 2 3 5 7 6 8


happy home ucid set = 1 2 3 4

Upstream Active Channel Settings:

ucid rpt enable sel prio MAP source dcid's


---- ---------- -------- -----------------
1 0x1c0 0
2 0x1c0 0
3 0x1c0 0
4 0x1c0 0
5 0x1c0 0
6 0x1c0 0
7 0x1c0 0
8 0x1c0 0

BcmCmUsTargetMset (a.k.a. usable UCDs gathered during startup):

us config
phy change ranging scdma
type ucid dcid count tried? enabled?
---- ---- ---- ------ ------- --------
3 1 25 4 n n
3 2 25 4 n n
3 3 25 4 n n
3 4 25 4 n n
3 5 25 4 n n
3 6 25 4 n n
3 7 25 4 n n
3 8 25 4 n n

[03:37:52 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper)
starting docs3 upstream initialization on target ucid=4
with upstream phy type 3 on hardware transmitter index 0

[03:37:52 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::ExecuteTccCmd: hwTxId=0


docs ucid=0
[03:37:52 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0
[03:37:52 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::InstallUsSets: Installing
UCD w/ucid for UCID=4 for CM hardware tx chan 0

[03:37:52 01/01/1970] [CmDocsisCtlThread]


BcmCmUsSetsState::TestAndLaunchUsTimeSync: starting upstream time sync
acquisition...
[03:37:52 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefOk: (Cm
Multi US Helper) target hwTxId=0
[03:37:52 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::UsTimeRefOk: upstream time
sync acquired for fHwTxId=0

== Beginning initial ranging for Docsis UCID 4 ==


Minimum transmit power is 17 dBmV
Maximum transmit power is 53 dBmV
Stored power level for UCID 4 is 42 dBmV
Using per transmitter stored initial upstream power = 42 dBmV hwTxId = 0 docsis
UCID = 4
RNG-RSP UsChanId=4 Adj: tim=1871 freq=-19 Stat=Continue (CmdPwr (UsChanId-dBmV):
(4-41.75) )
[03:37:53 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0xc9
RNG-RSP UsChanId=4 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (4-
41.25) )
RNG-RSP UsChanId=4 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (4-
41.75) )
RNG-RSP UsChanId=4 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (4-
41.25) )
RNG-RSP UsChanId=4 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (4-
41.75) )
RNG-RSP UsChanId=4 Adj: tim=0 freq=0 Stat=Success (CmdPwr (UsChanId-dBmV): (4-
41.25) )
[03:37:58 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::FirstRngSuccess:
(CmDocsisCtlThread)
first RNG-RSP w/status==SUCCESS for hwTxId=0 and DOCSIS ucid=4
[03:37:58 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::LaunchEaeBpkm:
(CmDocsisCtlThread) BPKM enabled. starting Early Authentication and Encryption BPKM
key requests. Primary Sid = 201
CM/CM_Console>
BCM339010
BCM3390B0 Bootloader version 2.7.0alpha4, Built by raiderlu on Jul 20 2023 at
14:46:27
RAM Windows size 63 mb

Loading compressed image 2


Loading 3,752,232 compressed bytes to 0x83a60000
Decompressing DOCSIS image at 0x83a6005c to 0x80004000
Decompressed image size 17,179,700 bytes (0x80004000-0x81066434)
Jumping to application at 0x80004000

eCos - hal_diag_init

Using 66060288(0x03f00000) Bytes Ram Size from Mbox6.

Using 66060288(0x03f00000) Bytes Ram Size from Mbox6.

Using 66060288(0x03f00000) Bytes Ram Size from Mbox6.

Using 66060288(0x03f00000) Bytes Ram Size from Mbox6.


BcmHeapInitialize starts
Init device '/dev/BrcmTelnetIoDriver'
Init device '/dev/ttydiag'
Init tty channel: 81065cc8
Init device '/dev/tty0'
Init tty channel: 81065ce8
Init device '/dev/haldiag'
HAL/diag SERIAL init
Init device '/dev/ser0'
BCM 33XX SERIAL init - dev: d3c00640.1
Set output buffer - buf: 0x813f86b0 len: 4096
Set input buffer - buf: 0x813f96b0 len: 4096
BCM 33XX SERIAL config - UART = d3c00640, chan = 81009cd8
��nit device '/dev/ser1'
Init device '/dev/ser2'
InitBoard: MIPS frequency 600000000
InitBoard: MANUFACT bits 0x5
InitBoard: CM_AON_RESET_HISTORY 0x00000001
+------------------------------------------------------------------------+
| This image is built using remote flash as nonvol. |
+------------------------------------------------------------------------+

ERROR: BcmEmtaIfSettings singleton is NULL and someone is accessing it! Is the


interface enabled?
[00:00:00 01/01/1970] [tStartup] BcmBfcSystemFactory::NewBfcSystem:
BcmEmtaCmDocsisSystem
[00:00:00 01/01/1970] [tStartup] BcmBfcStdEmbeddedTarget::InitStorageDrivers: (BFC
Target) Loading BootloaderStore driver...
[00:00:00 01/01/1970] [tStartup] BcmBfcStdEmbeddedTarget::InitStorageDrivers: (BFC
Target) Loading ProgramStore driver...
[00:00:00 01/01/1970] [tStartup] BcmBfcStdEmbeddedTarget::InitStorageDrivers: (BFC
Target) Loading NonVol driver...
[00:00:00 01/01/1970] [tStartup] BcmBfcStdEmbeddedTarget::InitStorageDrivers: (BFC
Target) Storage drivers initialized successfully.
[00:00:00 01/01/1970] [tStartup] BcmBfcStdEmbeddedTarget::InitDeviceAbstractions:
(BFC Target) Creating singletons for ProgramStore/BootloaderStore/NonVol devices...
Detecting the next image number that we will store to by default...
Bootloader indicates we are running image 2
Image2 header is not valid!
By default, we will dload to image number 2!
ProgramStoreDriverSetAlternateSignature:: Alternate signature is set to 9055
[00:00:00 01/01/1970] [tStartup] BcmBfcStdEmbeddedTarget::InitDeviceAbstractions:
(BFC Target) Device abstraction singletons created successfully.

mtaNvCalcChecksum: checksum= 1273036258


Reading Permanent settings from non-vol...
Checksum for permanent settings: 0xd18818d1
Setting downstream calibration signature to 'Prod_19.3_d31'
Setting downstream calibration signature to 'Prod_19.3_d31'
Settings were read and verified.

Reading Dynamic settings from non-vol...


Checksum for dynamic settings: 0x88672506
Settings were read and verified.

[00:00:02 01/01/1970] [tStartup] BcmBfcFpmDriver::Init: (BFC FPM Driver) FPM


already initialized, skipping hardware init
[00:00:02 01/01/1970] [tStartup] BcmBfcFpmDriver::Init: (BFC FPM Driver) FPM DDR
Start Phys Addr DDR Bank0: 0x9c00000
[00:00:02 01/01/1970] [tStartup] BcmBfcFpmDriver::Init: (BFC FPM Driver) FPM DDR
Start Virt Addr DDR Bank0: 0x89c00000
[00:00:02 01/01/1970] [tStartup] BcmBfcFpmDriver::Init: (BFC FPM Driver) FPM DDR
Start Phys Addr DDR Bank1: 0xbc00000
[00:00Starting DTP Processor.
Asserting 4KE(3) Reset!
_ENTRY4KE location = 8000e138
jumpvect4ke location = 80001000
entryCodeLoc = 80001000
Releasing reset to the 4KE core ID 3.
Releasing 4KE(10) Reset!
Waiting for core:3 4ke to respond via mailbox(1).
IOP Core: 3 Configured and Ready after 0 ms!
Starting UTP Processor.
Asserting 4KE(2) Reset!
Releasing reset to the 4KE core ID 2.
Releasing 4KE(10) Reset!
Waiting for core:2 4ke to respond via mailbox(1).
UtpDebugCounter 0xd0a80210
IOP Core: 2 Configured and Ready after 0 ms!
Starting EMC Processor.
Asserting 4KE(7) Reset!
Releasing reset to the 4KE core ID 7.
Releasing 4KE(10) Reset!
Waiting for core:7 4ke to respond via mailbox(1).
IOP Core: 7 Configured and Ready after 0 ms!
Starting FAP Processor.
Powering up FAP..
Asserting 4KE(4) Reset!
Releasing reset to the 4KE core ID 4.
Releasing 4KE(10) Reset!
Waiting for core:4 4ke to respond via mailbox(1).
:02 01/01/1970] [tStartup] BcmBfcFpmDriver::Init: (BFC FPM Driver) FPM DDR Start
Virt Addr DDR Bank1: 0x8bc00000
[00:00:02 01/01/1970] [tStartup] BcmBfcFpmDriver::Init: (BFC FPM Driver) Length:
0x1000000
[00:00:02 01/0IOP Core: 4 Configured and Ready after 14 ms!
1/1970]Starting up MISC SERVICES
Creating a new host CPU_COMM DQM manager. Instance: 82e1c770, DQM_REGS = d3801c00
Creating a new host CPU_COMM DQM manager. Instance: 82e1c6a8, DQM_REGS = d3801c00
Creating a new host CPU_COMM DQM manager. Instance: 82e1a3d0, DQM_REGS = d3801c00
Creating a new host CPU_COMM DQM manager. Instance: 82e1a308, DQM_REGS = d3801c00
Creating a new host CPU_COMM DQM manager. Instance: 82e18030, DQM_REGS = d3801c00
Creating a new host CPU_COMM DQM manager. Instance: 82e17f60, DQM_REGS = d3801c00
Creating a new host CPU_COMM DQM manager. Instance: 82e15c80, DQM_REGS = d3801c00
Creating a new host CPU_COMM DQM manager. Instance: 82e15bb0, DQM_REGS = d3801c00
[tStartup] BcmBfcFpmDriver::Init: (BFC FPM Driver) FPM Buffer size set to: 256
[00:00:02 01/01/1970] [tStartup] BcmBfcFpmDriver::Init: (BFC FPM Driver)
fFpmLargestBufferSize: 2048 fFpmSizeShiftBits: 0x8
[00:00:02 01/01/1970] [tStartup] BcmBfcFpmDriver::Init: (BFC FPM Driver) Pool
index: 0 pool size: 2048
[00:00:02 01/01/1970] [tStartup] BcmBfcFpmDriver::Init: (BFC FPM Driver) Pool
index: 1 pool size: 1024
[00:00:02 01/01/1970] [tStartup] BcmBfcFpmDriver::Init: (BFC FPM Driver) Pool
index: 2 pool size: 512
[00:00:02 01/01/1970] [tStartup] BcmBfcFpmDriver::Init: (BFC FPM Driver) Pool
index: 3 pool size: 256
[00:00:02 01/01/1970] [tStartup] BcmBfcFpmDriver::Init: (BFC FPM Driver) Lookup
table index: 0 pool size: 3
[00:00:02 01/01/1970] [tStartup] BcmBfcFpmDriver::Init: (BFC FPM Driver) Lookup
table index: 1 pool size: 2
[00:00:02 01/01/1970] [tStartup] BcmBfcFpmDriver::Init: (BFC FPM Driver) Lookup
table index: 2 pool size: 1
[00:00:02 01/01/1970] [tStartup] BcmBfcFpmDriver::Init: (BFC FPM Driver) Lookup
table index: 3 pool size: 1
[00:00:02 01/01/1970] [tStartup] BcmBfcFpmDriver::Init: (BFC FPM Driver) Lookup
table index: 4 pool size: 0
[00:00:02 01/01/1970] [tStartup] BcmBfcFpmDriver::Init: (BFC FPM Driver) Lookup
table index: 5 pool size: 0
[00:00:02 01/01/1970] [tStartup] BcmBfcFpmDriver::Init: (BFC FPM Driver) Lookup
table index: 6 pool size: 0
[00:00:02 01/01/1970] [tStartup] BcmBfcFpmDriver::Init: (BFC FPM Driver) Lookup
table index: 7 pool size: 0

------------------------------------
Free Pool Manager Configuration
------------------------------------
Buffer size in Bytes............... 256
Default Offset in Bytes............ 16
Default Pad in Bytes............... 0

Pool 0:
Base Address of FPM Memory ........ 0x89c00000
Total Configured FPM Memory Size... 16777216
Free Fifo Full..................... 0
Free Fifo Empty.................... 1
Alloc Fifo Full.................... 1
Alloc Fifo Empty................... 0
Number of Tokens................... 65536
Number of Tokens Available......... 65136
Number of not valid token frees.... 0
Number of not valid token multi.... 0
Overflow Count..................... 0
Underflow Count.................... 0

Pool 1:
Base Address of FPM Memory ........ 0x8bc00000
Total Configured FPM Memory Size... 16777216
Free Fifo Full..................... 0
Free Fifo Empty.................... 1
Alloc Fifo Full.................... 1
Alloc Fifo Empty................... 0
Number of Tokens................... 65536
Number of Tokens Available......... 65407
Number of not valid token frees.... 0
Number of not valid token multi.... 0
Overflow Count..................... 0
Underflow Count.................... 0
[00:00:02 01/01/1970] [tStartup] BcmBfcPacketAlloc::Init: (Bfc Packet Allocation)
Packet Alloc Header Buffer Pool 0 Start Addr: 0x83530200 Length: 0x700000 Max
Buffer Size: 0x70
[00:00:02 01/01/1970] [tStartup] BcmBfcPacketAlloc::Init: (Bfc Packet Allocation)
Packet Alloc Header Buffer Pool 1 Start Addr: 0x82e301e0 Length: 0x700000 Max
Buffer Size: 0x70
Initializing main FAP DQM interrupts.
e8401000: 00800048
e8401004: 00000000
e8401008: 00000008
e840100c: 00000000
e8401010: 00040000
e8401014: 00000000
e8401018: 00000000
e840101c: 00000000
Initializing main FAP DQM interrupts.
e8401000: 00800048
e8401004: 00000000
e8401008: 0000000a
e840100c: 00000000
e8401010: 00040000
e8401014: 00000000
e8401018: 00000000
e840101c: 00000000
ITCRPC: ITC CTL Tx sent initial handshake CODE0
ITCRPC: ITC1 CTL Tx sent initial handshake CODE0
ITCRPC: ITC CTL TP1 Tx sent initial handshake CODE0
ITCRPC: ITC CTL SVM Tx sent initial handshake CODE0
[00:00:02 01/01/1970] [ConsoleMirrorThread] ConsoleMirrorThread::ThreadMain:
(ConsoleMirrorThread) Console Mirror thread running...
[00:00:02 01/01/1970] [Telnet Thread] BcmTelnetThread::ThreadMain: (Telnet Thread)
Telnet server thread running...
ITCRPC: ITC CTL Rx got first message event
ITCRPC: ITC CTL Tx sent reply handshake message CODE1
ITCRPC: ITC CTL SVM Rx got first message event
ITCRPC: ITC CTL SVM TxCreating BcmCmRgMsgPipeCommandTable
Creating SNMP agent cablemodem agent
cablemodem agent disabling management.
cablemodem agent deferring traps.
Creating BcmEmtaCommandTable
Creating BcmEmtaEndptCommandTable
WARNING: Parameter with id 1 already exists!

If you pressed the 's' key before this point, we will skip driver initialization...
sent reply handshake message CODE1
RPC Version 00000006
DQM Init complete for tunnel 0
RPC Version 00000006
DQM Init complete for tunnel 3
[01/01/1970 00:00:02] [BFCEV] Unspecified system reset. HW reset history=0x00000001
( power_on_reset )
Creating DOCSIS Control Thread...
Initializing maiInitalizing Gfap Hal..
n DTP DQM interrupts.
e8001000: 00000048
e8001004: 00000000
e8001008: 00000008
e800100c: 00000000
e8001010: 00000000
e8001014: 00040000
e8001018: 00000000
e800101c: 00000000
Creating a new host UTP DQM manager. Instance: 82d6f53c
Initializing main UTP DQM interrupts.
e8201000: 00000049
e8201004: 00000000
e8201008: 00000008
e820100c: 00000000
e8201010: 00000000
e8201014: 00000000
e8201018: 00000000
e820101c: 00000000
->No ext LNA controlled by CM. Default to Internal LNA!
->SetUsPll
PllMiscCtrl.Reg(b21=PhaseCaptMode)=0x00200000
VwdacExt = 644
VwdacInt = 635
Ewdac = 0.014173
Delta Fine = 0x4

>>>>ChipID=0x3390, ChipRev=0x10. Allocated memory for Viper = 0x03f00000


PllDcoCtrl B4=0x00000000, AF=0x00000001
>>>Loading Uni leap image...
>>>Reset AP
LeapCtrl.ByteSwapEn(0xd21000a8) = 0x03030303
LeapCtrl.AddrTrans(0xd21000ac) = 0x07f00001
LEAP RevID reg(0xd2100000) = 0x00000200
>>>>EndianSwap(b7)=0x00
>>>>LEAP Chip Load Address=0x4000c200 len=474104
>>>>Mips Noncache Chip Load Address=0xa3f0c200
Downloading LEAP image 474104 bytes starting address 0xa3f0c200.Done!

>>>AP dload time = 164 ms


>>>Run AP
HAB_InitDoneEvent set after 391 ms.

>>>>HabStartAddress=0xd20c8000
>>>>MultiMaster Leap access is working!
****************************************************************************
* LEAP ApVersion: ChpId=0x00003390, RevId=0x0040, LeapRAMVersion=12.2.7023.0 *
****************************************************************************
>>LEAP CPPM=1480ms. Disable optional Scan mode. CppmMode=1<<

LeapInit: powerup LNA pga1=Off, pga2=On...


BcmHalMapInterrupt to INTERRUPT_ID_US_IRQ! Maskbit=0x00000000, Statusbit=0x00000000
WOD0 Shared Mem Address: 0x400e6564
WOD1 Shared Mem Address: 0x400e7670
AIF Status Shared Mem Address: 0x400e8974
>>>>LEAP Serial Buffer Start Address=0x400907bc size=0x00009000
Curr_write_ptr=0x40094031 NumPrintMsg=214
>>>>Mips Noncache LeapUartCircularBufferStartAddr=0xa3f907bc

<-LeapInit Done! LeapVerNum=12270230


Curr Leap version=12270230, checkVersion=11270191
UDA Tertiary Shared Mem Address: 0x400e2494 len=16576;
UDA Quaternary Shared Mem Address: 0x400e1c04 len=2176
UDA Shared Mem Address: 0x400e8974
UDA PgaRloadgainCntl = 0x0f

===== Read Leap AIF Status =====


CfgMode: 0x00000000 CPPM=3(Completed); CABLE=2(Connected)
LnaInfo: 0x34320000 => LnaMode=0
LnaInfo_pga: 0x01020102 ==> PGA_Tilt=0, PGA_Gain=2, PGA2_Tilt=0, PGA2_GAIN=2
FreqStep code: 1
FreqStartHz: 56999999 hz
FreqStopHz: 1215000000 hz
Composite Power: -8781 1/256 dB ==> -34.300781 dB
Disconnect ThresHold: 0xffffb000
CPPM ThresHold: 0xffffe94d
CPPM ThresHold Hysteresis: 0x00000500
CPPM Max Power: 0xffffd087 1/256 dB ==> -47.472656 dB
CPPM Min Power: 0xffff98d0 1/256 dB ==> -103.187500 dB

Skip External channels detection! Total channel=34

SetRatios called with primary downstream channel number = 0


AnnexMode[0] = 0 QAM_Mode[0] = 0
Num/Den = 78/149
BcmMacInit: advMapRunAheadTimeMin = 3584 (0x00000e00) 10.24 MHz ticks, 350 usec
Control table same as default - offset is 700
Initializing DS Docsis 3.0 MAC
Initializing Quarantine D3 DS MAC structures to 0
Initializing Quarantine D31 DS MAC structures to 0
Initializing Quarantine D31 DS MAC structures to 0
Initializing US Docsis 3.0 MAC
Creating a new host UTP DQM manager. Instance: 82cfb6cc
Creating a new host UTP DQM manager. Instance: 82cf95bc
[00:00:06 01/01/1970] [tStartup] BcmDocsisCmHalIf::Register: (DOCSIS CableModem
HalIf) CM HAL reports h/w support for PHS, bitmask=0x3
[00:00:06 01/01/1970] [tStartup] BcmDocsisCmHalIf::Register: (DOCSIS CableModem
HalIf) CM HAL reports h/w support for PHS, US size=64, DS size=256 bytes.
Tcpip NI: Init - RegisteredStackCount = 1
Tcpip NI: Init - RegisteredStackCount = 2
Tcpip NI: Init - RegisteredStackCount = 3
Tcpip NI: Init - RegisteredStackCount = 4
Tcpip NI: Init - RegisteredStackCount = 5
Tcpip NI: Init - RegisteredStackCount = 6
Tcpip NI: Init - RegisteredStackCount = 7
Tcpip NI: Init - RegisteredStackCount = 8
Tcpip NI: Init - RegisteredStackCount = 9
Tcpip NI: Init - RegisteredStackCount = 10
ItcNiDriverEntry: interface 44
Creating a new host CPU_COMM DQM manager. Instance: 82cde288, DQM_REGS = d3801c00
Creating a new host CPU_COMM DQM manager. Instance: 82cde1c0, DQM_REGS = d3801c00
Starting driver for BcmBfcVirtualNiHalIf Virtual Eth-Switch Lan(0)
Creating a new host UTP DQM manager. Instance: 82d7a104
Creating a new host UTP DQM manager. Instance: 82d7a01c
Starting driver for BcmBfcVirtualNiHalIf Virtual Eth-Switch Lan(1)
Starting driver for BcmBfcVirtualNiHalIf Virtual Eth-Switch Lan(2)
Starting driver for BcmBfcVirtualNiHalIf Virtual Eth-Switch Lan(3)
Starting driver for BcmBfcVirtualNiHalIf Virtual Eth-Switch Lan(7)
Starting driver for BcmBfcVirtualNiHalIf Virtual RG Host
Starting driver for BcmBfcVirtualNiHalIf Virtual MoCA
Starting driver for BcmBfcVirtualNiHalIf Virtual WiFi(0)(0) MBSS
Starting driver for BcmBfcVirtualNiHalIf Virtual WiFi(1)(0) MBSS
Starting driver for BcmBfcVirtualNiHalIf Virtual WiFi(2)(0) MBSS
**************************************************************
NOTE: CM VirtNiHAL mode is: ENABLED
**************************************************************
Creating BcmEmtaRemoteAccessCommandTable
ItcRxThreadmisc_dqnet_status ifname priv0 up
: STBrx
Forward Assist Manager Starting...
NATC Info: FAP NATC initialized!!!
[00:00:06 01/01/1970] [Forward Assist Manager]
BcmBfcForwardAssistManager::OperatingConfigBitsEnable: (Forward Assist Manager)
New Config = 0x48000000
UnimacByoi: Enabled
misc_dqnet_status ifname cm0 up
Warning: service 4 rx unregistered function 1
rpc_send_request timeout on tunnel 0
<<<<<<<<<<<<< rpc_dump_msg >>>>>>>>>>>>>>>>>>
msg 0x810cffb0 RC 0 Req 1 Rep 0 Serv 4 Func 22 reqcnt 0
Len: 4 02041600 00000000 00000000 00000000
[00:00:11 01/01/1970] [ThermalMgmt] BcmThermalMonitor: initialized OK.
Creating the PacketCable Forwarder...
Adding IP Stack6 HalIf to the PacketCable Forwarder
Calling BcmCmDocsisSystem::PostDriverInitialization()...
Creating the DOCSIS Forwarder...
The virtual ethernet IP stack (7) is enabled!
Not hooking to a forwarder to avoid CPE hijack.
Adding DOCSIS CableModem HalIf as the default interface to the DOCSIS Forwarder
Adding IP Stack1 HalIf to the DOCSIS Forwarder
Adding IP Stack2 HalIf to the DOCSIS Forwarder
Adding IP Stack8 HalIf to the DOCSIS Forwarder
Adding IP Stack9 HalIf to the DOCSIS Forwarder
Adding ITC0 HalIf to the DOCSIS Forwarder
Adding Virtual Eth-Switch Lan(0) HalIf to the DOCSIS Forwarder
Adding Virtual Eth-Switch Lan(1) HalIf to the DOCSIS Forwarder
Adding Virtual Eth-Switch Lan(2) HalIf to the DOCSIS Forwarder
Adding Virtual Eth-Switch Lan(3) HalIf to the DOCSIS Forwarder
Adding Virtual Eth-Switch Lan(7) HalIf to the DOCSIS Forwarder
Adding Virtual RG Host HalIf to the DOCSIS Forwarder
Adding Virtual MoCA HalIf to the DOCSIS Forwarder
Adding Virtual WiFi(0)(0) MBSS HalIf to the DOCSIS Forwarder
Adding Virtual WiFi(1)(0) MBSS HalIf to the DOCSIS Forwarder
Adding Virtual WiFi(2)(0) MBSS HalIf to the DOCSIS Forwarder

WARNING - Couldn't find table 1.3.6.1.4.1.4413.2.2.2.1.2.5.11.8 on Vendor CM Agent


w/ BRCM Factory Support
Restricting transmission between Virtual RG Host and virtual CPE interfaces.
MSN (NEW 2b): Found Itc HalIf! cpeStack = 2
Linking Docsis and PacketCable packet switches...
Adding DOCSIS Embedded Interface HalIf as the default interface to the
PacketCable Forwarder
Adding PacketCable Embedded Interface HalIf to the DOCSIS Forwarder
MSN (NEW 2b-eMTA): Found Itc HalIf! cpeStack = 2
Setting up singleton pointer.
Creating SNMP agent eRouter Proxy Agent
eRouter Proxy Agent disabling management.
eRouter Proxy Agent deferring traps.
Enabling SNMP proxy
Creating SNMP agent EMTA agent
EMTA agent disabling management.
EMTA agent deferring traps.
EMTA agent entering RFC-2576 Coexistence security mode.
EMTA agent entering Basic/Hybrid flow provisioning mode.
Creating SNMP agent eMTA Proxy Agent
eMTA Proxy Agent disabling management.
eMTA Proxy Agent deferring traps.
Enabling SNMP proxy
eMTA Proxy Agent setting UDP port to 12161
WARNING - Couldn't find table 1.3.6.1.2.1.7.5 on emta factory agent
WARNING - Couldn't find table 1.3.6.1.2.1.7.5 on eMTA Proxy Agent
BcmSnmpThread:AgentPropertiesChanged descriptor NULL!

Configuring IP stack 2: IP Address = 192.168.100.1


[00:00:12 01/01/1970] [tStartup] BcmEcosIpHalIf::AddIpv6LinkLocalAddress: (IP
Stack2 HalIf) Configuring link-local IPv6 address fe80::fe4a:e9ff:fede:ad02/64
Creating Propane Control Thread...
Propane version: 2.0.1 (28 Oct 2002)
Received RG Event 0x
BcmCmDocsisApplication::PostDriverInitialization Configuring SNMP.
Initializing ifPhysAddress values...
Instantiating CmSnmpAgent object.
Starting SNMP subsystem
Registering STP Filter Snoop with all interfaces.
Registering DOCSIS MIB Filter Snoop with CPE and WAN interfaces.
Creating SNMP agent CPE diag agent
CPE diag agent disabling management.
CPE diag agent deferring traps.
[00:00:12 01/01/1970] [tStartup] BcmNonVolDeviceDriverBridge::WriteImpl: (NonVol
Device) ERROR - Failed to write settings data to the device!
[00:00:12 01/01/1970] [tStartup] BcmNonVolDeviceDriverBridge::WriteSync: (NonVol
Device) ERROR - Synchronous write to dynamic nonvol section failed!
ERROR - failed to write Non-Vol Settings to the device!
BcmSnmpThread starting thread operation.
[80000001Configuring IP stack 9: IP Address = 172.31.255.45
[00:00:12 01/01/1970] [eRouterMsgPipe] BcmEcosIpHalIf::AddIpv6LinkLocalAddress:
(IP Stack9 HalIf) Configuring link-local IPv6 address fe80::fe4a:e9ff:fede:ad11/64
eRouterMessagePipe subscribing to 'thermal' events.
Thermal sensitivity is 'HIGH'
State 'Normal' enabled.
State 'Elevated 1' enabled.
State 'Elevated 2' enabled.
State 'Elevated 3' enabled.
State 'Elevated 4' enabled.
State 'Elevated 5' enabled.
State 'Elevated 6' enabled.
00: 0:12 1/ 1/1970] [Telnet Thread] BcmTelnetThread::CreateAndBindIp: (Telnet
Thread) Telnet listening on 192.168.100.1
[00:00:12 01/01/1970] [Telnet Thread] BcmTelnetThread::CreateAndBindIp: (Telnet
Thread) ERROR - IP Address 192.168.100.1 already bound with Size: 1
[00:00:12 01/01/1970] [Telnet Thread] BcmTelnetThread::CreateAndBindIp: (Telnet
Thread) Telnet listening on 172.31.255.45
State 0x0
Received eRouter BOOTED event from RG
EROUTER I.P Address: 172.31.255.40
Certificate File Name: newreq.ca
Initializing Net-SNMP transport for IPv4
Initializing Net-SNMP transport for IPv6
IPv6 - register netsnmp_brcmV6_ctor to get our brcm V6 UDP domain
IPv6 init_bcmV2SessionAndTransport: Open a session and hook our callbacks
[00:00:13 01/01/1970] [tStartup] BcmDocsisCmHalIf::RegisterSnmpObjects: (DOCSIS
CableModem HalIf) Interface 10 additional registration w/ SNMP agent OK.
[00:00:13 01/01/1970] [tStartup] BcmPacketSwitchBridgingHalIf::RegisterSnmpObjects:
(PacketCable Embedded Interface HalIf) Interface 39 additional registration w/ SNMP
agent OK.
CmSnmpAgent installing views...
CmSnmpAgent installing DOCSIS Default View entries...
Vendor CM Agent w/ BRCM Factory Support installing engine ID...
Vendor CM Agent w/ BRCM Factory Support installing context...
===> WARNING: Failed to register ScalarMibBridge 1.3.6.1.2.1.126.1.4 to agent
Vendor CM Agent w/ BRCM Factory Support
===> Object already bridged.
===> WARNING: Failed to register ScalarMibBridge 1.3.6.1.4.1.4491.2.1.29.1.2 to
agent Vendor CM Agent w/ BRCM Factory Support
===> Object already bridged.
SNMP startup complete.
SpecA - IP Stack address is 0.0.0.0
mongoose set_ports_option: listening on:(IPv4) 0.0.0.0; port:8080
[[00:00:14 01/01/1970] [tStartup] BcmHttpServerThread::Enable: (HttpServerThread)
Broadcom HttpServerThread running status = 1
[00:00:14 01/01/1970] [tStartup] BcmVendorCmApplication::CreateDhcpServer:
(VendorExtension CmApp) Configuring the DHCP server with 50 leases from
192.168.100.10 -> 192.168.100.60; lease time is 30 seconds.
[00:00:14 01/01/1970] [tStartup] BcmVendorCmApplication::StartDhcpServer:
(VendorExtension CmApp) Starting DHCP Server!
[00:00:14 01/01/1970] [HTTP Client Thread] BcmDocsisCmHalIf::AddSnoop: (DOCSIS
CableModem HalIf) WARNING - HTTP Client Snoop: unsafe modification of the Snoop
lists after the interface is up!
K0Binding NV remote IP sockets to 172.31.255.45
**** RemoteNonVolAccess **** Remote nonvol access is ENABLED

initBlindData: nvramSize= 716


mtaNvCalcChecksum: checksum= 1273101781Completed Adding New Command for Emta Remote
Console: log
Completed Adding New Command for Emta Remote Console: diag
Completed Adding New Command for Emta Remote Console: reset
Completed Adding New Command for Emta Remote Console: set
Completed Adding New Command for Emta Remote Console: show
EMTA battery callback = 0x80901d50
[00:00:14 01/01/1970] [tStartup] BcmEcosIpHalIf::AddSnoop: (IP Stack6 HalIf)
WARNING - NetToMedia Snoop: unsafe modification of the Snoop lists after the
interface is up!
[e00[00:00:14 01/01/1970] [HTTP Client Thread] HttpClientThread::ThreadMain: (HTTP
Client Thread) Broadcom HTTP Client thread starting...
y File Name: newreq.key

No Certificate file!

Starting TFTP of CM Version file!


Opening file 'cmversion.txt' on 172.31.255.40 for writing...
:00:14 01/01/1970] [Telnet Thread] BcmTelnetThread::CreateAndBindIp: (Telnet
Thread) Telnet listening on fd00::ffff:ac1f:ff2d/64
[00:00:14 01/01/1970] [Telnet Thread] BcmTelnetThread::CreateAndBindIp: (Telnet
Thread) ERROR - IP Address 172.31.255.45 already bound with Size: 3
[00:00:14 01/01/1970] [Telnet Thread] BcmTelnetThread::CreateAndBindIp: (Telnet
Thread) ERROR - IP Address fd00::ffff:ac1f:ff2d/64 already bound with Size: 3
[00:00:14 01/01/1970] [Telnet Thread] BcmTelnetThread::CreateAndBindIp: (Telnet
Thread) ERROR - IP Address 172.31.255.45 already bound with Size: 3
[00:00:14 01/01/1970] [Telnet Thread] BcmTelnetThread::CreateAndBindIp: (Telnet
Thread) ERROR - IP Address fd00::ffff:ac1f:ff2d/64 already bound with Size: 3
WARNING - Couldn't find group 1.3.6.1.4.1.4413.2.2.2.1.9.1.2 on emta factory agent
[00:00:14 01/01/1970] [tStartup]
EmtaPacketSwitchBridgingHalIf::RegisterSnmpObjects: (DOCSIS Embedded Interface
HalIf) Interface 40 additional registration w/ SNMP agent OK.
[00:00:14 01/01/1970] [tStartup] BcmEcosIpHalIf::AddSnoop: (IP Stack6 HalIf)
WARNING - IfUnknownProtos Snoop: unsafe modification of the Snoop lists after the
interface is up!
[00:00:14 01/01/1970] [tStartup] BcmEcosIpHalIf::AddSnoop: (IP Stack6 HalIf)
WARNING - eCos UDP port 0 Snoop: unsafe modification of the Snoop lists after the
interface is up!
===> WARNING: Failed to register ScalarMibBridge 1.3.6.1.4.1.4413.2.2.2.1.9.1.5 to
agent emta factory agent
===> Object not found on agent.
emta factory agent installing engine ID...
emta factory agent installing context...
emta factory agentResetting to default state.
emta factory agent destroying users...
emta factory agent destroying notifies...
emta factory agent destroying views...
emta factory agent entering RFC-2576 Coexistence security mode.
emta factory agent entering Basic/Hybrid flow provisioning mode.
[00:00:14 01/01/1970] [tStartup] BcmEcosIpHalIf::AddSnoop: (IP Stack6 HalIf)
WARNING - ARP Filter Snoop: unsafe modification of the Snoop lists after the
interface is up!
[00:00:14 01/01/1970] [tStartup] BcmEcosIpHalIf::AddSnoop: (IP Stack6 HalIf)
WARNING - Mini USFS Snoop: unsafe modification of the Snoop lists after the
interface is up!
[00:00:14 01/01/1970] [tStartup] BcmEcosIpHalIf::AddSnoop: (IP Stack1 HalIf)
WARNING - ARP Filter Snoop: unsafe modification of the Snoop lists after the
interface is up!
[00:00:14 01/01/1970] [tStartup] BcmEcosIpHalIf::AddSnoop: (IP Stack1 HalIf)
WARNING - LAN Broadcast Rate Limiter Snoop: unsafe modification of the Snoop lists
after the interface is up!
[00:00:14 01/01/1970] [tStartup] BcmEcosIpHalIf::AddSnoop: (IP Stack6 HalIf)
WARNING - NeighborDiscoverySnoop: unsafe modification of the Snoop lists after the
interface is up!
Initializing diplexer
>>DpXer Select1 active: GPIO34 set to 0<<
>>Sending 16 DsCal Offsets to Leap<<
00[00:00:14 01/01/1970] [Telnet Thread] BcmTelnetThread::CreateAndBindIp: (Telnet
Thread) ERROR - IP Address 172.31.255.45 already bound with Size: 3
Activated HW diplexer 1: US:(5 MHz..204 MHz) DS:(258 MHz..1218 MHz) (ACTIVE)
SWITCHABLE diplexer settings
----------------------------
0: US:(5 MHz..85 MHz) DS:(108 MHz..1218 MHz)
1: US:(5 MHz..204 MHz) DS:(258 MHz..1218 MHz) (ACTIVE)
Diplexer driver settings
------------------------
Diplexer driver uses GPIO 34, STANDARD sense.
Current diplexer driver selection is HIGH

[00:00:15 01/01/1970] [ThermalMgmt] BcmThermalMonitor::StartSensors: Starting


thermal sensor timers
[00:00:15 01/01/1970] [ThermalMgmt] Setting thermal throttle state 5 threshold to
>= 125C
[00:00:15 01/01/1970] [ThermalMgmt] Setting thermal throttle state 4 threshold to
>= 123C
[00:00:15 01/01/1970] [ThermalMgmt] Setting thermal throttle state 3 threshold to
>= 122C
[00:00:15 01/01/1970] [ThermalMgmt] Setting thermal throttle state 2 threshold to
>= 120C
[00:00:15 01/01/1970] [ThermalMgmt] Setting thermal throttle state 1 threshold to
>= 115C

Checking board manufacturing state...


WARNING: Board NV manufacturing incomplete.
Check the following settings:
USB MAC, BPI public key, BPI private key, BPI+ root public key, BPI+ CM
certificate, BPI+ CA certificate, BPI public key, BPI private key, BPI+ root public
key, BPI+ CM certificate, BPI+ CA certificate, CM MAC address (IP stack 1), BPI 3.1
public key, BPI 3.1 private key, BPI 3.1 Device CM Certificate, BPI 3.1 Device CA
certificate, BPI 3.1 Root CA certificate, docsDevSerialNumber, MTA pvt key exponent
Installing temporary factory key.

:0
Bulk Data Transfer Thread is ready.

00:14.250 01/01/1970 (LOG) WARN: Module CALC. Is already registered!


00:00:15.250 01/01/1970 (LOG) WARN: Module NET. Is already registered!
00:00:15.250 01/01/1970 (LOG) WARN: Module UTIL. Is already registered!
: 0:15 1/ 1/1970] [IpsecTimer] IpsecTimer::ThreadMain: Entering...
[00:00:15 01/01/1970] [Telnet Thread] BcmTelnetThread::CreateAndBindIp: (Telnet
Thread) ERROR - IP Address fd00::ffff:ac1f:ff2d/64 already bound with Size: 3
Vendor CM Event Log initializing with stored events.
00:00:15.320 01/01/1970 (CALC) CC: Initialization starting...
Done w/ deferred traps.
Vendor CPE Agent w/ BRCM Factory Support installing engine ID...
Vendor CPE Agent w/ BRCM Factory Support installing context...
Event log initialization complete.
Waiting for eRouter boot message.
[00:00:16 01/01/1970] [eRouterMsgPipe] Tftp Client::GetReply: (Tftp Client) Timed
out on socket select!
[00:00:16 01/01/1970] [eRouterMsgPipe] Tftp Client::Send: (Tftp Client) Attempt
#(1) Backoff (2) Exp Block #(0) Last Block #(0) Recv'd Block #(0)

Tftp transfer CM version file open successful!

Tftp transfer CM version file is complete!

Starting TFTP of eRouter Version file!

Opening file 'version.txt' on 172.31.255.40 for reading...


[00:00:16 01/01/1970] [eRouterMsgPipe] Tftp Client::Send: (Tftp Client) TFTP
blocksize value returned by server: 1448
Setting proxy community to public/private
RouterProxySnmpAgent verifying IP communication to eRouter
Tftp read < 1448 bytes, we have reached end of file.
Tftp transfer complete!
TFTP Settings:
Stack Interface = 0
Server Ip Address = 172.31.255.40
Server Port Number = 69
Block size = 1448
Total Blocks Read = 4
Total Bytes Read = 5525

eRouter is configured to remain UP on battery.


Enabling SNMP proxy
Sent 10 pings, received 10 replies.
eRouter is operating in Disabled mode.
Creating SNMP agent eRouter Remote Agent
eRouter Remote Agent disabling management.
eRouter Remote Agent deferring traps.
Enabling SNMP proxy
RouterProxySnmpAgent populating MIBs...
RouterProxySnmpAgent populating proxy_cableDataFactoryGroup...
RouterProxySnmpAgent populating proxy_esafeMibGroup...
RouterProxySnmpAgent populating proxy_bfcMgmtGroup...
RouterProxySnmpAgent populating proxy_rgMgmtBaseGroup...
RouterProxySnmpAgent populating proxy_hrStorageGroup...
RouterProxySnmpAgent populating proxy_hrDeviceGroup...
RouterProxySnmpAgent populating proxy_httpMgmtGroup...
RouterProxySnmpAgent populating proxy_ifMIBGroup...
RouterProxySnmpAgent populating proxy_interfacesGroup...
RouterProxySnmpAgent populating proxy_brcmCpeMgmtGroup...
RouterProxySnmpAgent populating proxy_rip2Group...
RouterProxySnmpAgent populating proxy_igmpStdMIBGroup...
RouterProxySnmpAgent populating proxy_l2ogreMibGroup...
RouterProxySnmpAgent populating proxy_clabGREMibGroup...
RouterProxySnmpAgent populating proxy_pingMgmtGroup...
RouterProxySnmpAgent populating proxy_wifiMgmtGroup...
RouterProxySnmpAgent populating proxy_wifiHotspotMibGroup...
RouterProxySnmpAgent populating proxy_ieee802dot11MgmtGroup...
RouterProxySnmpAgent populating proxy_clabWIFIMibGroup...
RouterProxySnmpAgent populating proxy_wifiFactoryGroup...
RouterProxySnmpAgent populating proxy_moca11Group...
RouterProxySnmpAgent populating proxy_dot3Group...
MIB population complete!
Done w/ deferred traps.
eRouter Proxy Agent installing engine ID...
eRouter Proxy Agent installing context...
Discovering primary virtual CPE interface.
Parsing interface number from ifName
Updating 'eth0' (0x65746830) virt hal ifDescr = 'Ethernet CPE Interface',
ifPhysAddress = fc:4a:e9:de:ad:02
BcmRouterProxyNiHalIf::GetSingletonInstance: WARNING - the singleton is NULL, and
someone is accessing it!
Setting proxy community to public/private
Done w/ deferred traps.
eMTA Proxy Agent installing engine ID...
eMTA Proxy Agent installing context...
Received RG Event 0x80000001 State 0x1
eRouter Linux WAN Down
Checking for cable cut...

[00:00:18 01/01/1970] [eRouterMsgPipe] eRouterMsgPipe::UpdateIpNetToMediaEntry:


(eRouterMsgPipe) eRouter IP address:0.0.0.0
Plant power is 15.55

Cable connected

+-----------------------------------------------------------------------+
| Portions of this product contain open source software and are subject |
| to terms of the applicable license as specified in the release notes. |
+-----------------------------------------------------------------------+

*
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* * * *
* * * * * * ***
* * * * * * * * *******************
* * * * * *
* *

Broadcom Corporation Reference Design

+----------------------------------------------------------------------------------
--------------+

| _/_/ _/ _/

| _/ _/ _/_/ _/_/ DOCSIS Cable Modem

| _/ _/ _/ _/

| _/ _/ _/

| _/ _/ _/

| _/ _/ _/ _/

| _/_/ _/ _/

| |
| Copyright (c) 1999 - 2023 Broadcom Corporation

| |

| Revision: Prod_19.3_d31

| |

| Features: Infinity601V Console TelnetConsole SshConsole Nonvol Fat HeapManager


SNMP

| Features: Networking IPv6 (script Infinity601V) PNM

| Features: AckCel(tm) DOCSIS 3.1 Propane(tm) CM SNMP w/Factory MIB Support CM


Vendor

| Features: Extension FAP EURO Production ECN's current to CW125


CmHalLib=19.50(power)

| Features: PID=0x3390 BIDnotread Bootloader-Rev=2.7.0alpha4

| Features: Bootloader-Compression-Support=0x11 MANUFACT_BITS=0x5

| Features: IopLib-Rev=Prod_19.3_d31-2019-10-17.32.1 LEAP-Rev=12.2.7023.0

| Features: IPv6 Stack Version 1.2.0

| Features: eCos Console Cmds, (no Idle Loop Profiler)

+----------------------------------------------------------------------------------
--------------+

| Broadcom Data-Only CM Vendor Extension

| |

| Copyright (c) 1999 - 2023 Broadcom Corporation

| |

| Revision: Prod_19.3_d31

| |

| Features: DHCP Server HTTP Server OSS2-N-03025 Visualization LED Controller

+----------------------------------------------------------------------------------
--------------+

| _/ _/ _/_/_/ _/

| _/_/ _/_/ _/ _/_/ Embedded MTA

| _/ _/ _/ _/ _/ _/

| _/ _/ _/ _/ _/

| _/ _/ _/ _/_/__/ CableLabs Certified


| _/ _/ _/ _/ _/ PacketCable Certified

| _/ _/ _/ _/ _/

| |

| Copyright (c) 1999 - 2023 Broadcom Corporation

| |

| Revision: Prod_19.3

| |

| Features: Infinity601V (EuroPacketCable) eCos

| Features: OPTIONS: IPv4 IPSEC

| Features: MSO Build Option: Default

| Features: MSO Config Option: Generic

| Features: LDX-APP: dspApp3390_all_codecs-apm

| Features: PROTOCOL: NCS

| Features: PacketCable-v1.5

| Features: LDX VERSION: 31.181.0

| Features: XCHG VERSION: 193.0 - Built: Sep 17 2019 13:00:40

| Features: XDRV VERSION: 193.0 - Built: Sep 17 2019 13:00:18

| Features:

| Features: Build options:

| Features: locale=ch dspapp=all_codecs euro=1 pktc_ver=15 bbn=1

+----------------------------------------------------------------------------------
--------------+

| Build Date : Jul 20 2023

| Build Time : 14:43:59 (+0800)

| Build By : raiderlu

| Build Products :

| Build Processors: 3390

| Build Parameters: num_sids 16 docsis 31 pid 9055 c 45 mtaipv6 0 j 4 outputdir

| Build Parameters: Infinity601V_pc15_unimacbyoi_Bx imagename


Infinity601V_pc15_unimacbyoi_Bx
| Build Parameters: chipRev Bx swver 012

| Build Targets :

| Build Tag : master

| Image Path :
/home/raiderlu/Work/supergit/download/openbfc19.3/cm/rbb_cm/rbb_cm_src/Vend

| Image Path : orCTI/bash/Infinity601V_pc15_unimacbyoi_Bx

| Image Name : Infinity601V_pc15_unimacbyoi_Bx_sto.bin

| Build Command : Infinity601V bbn eu nosigtls nosipdbg nodect ipv6 mtaipv6 0 j 4


outputdir

| Build Command : Infinity601V_pc15_unimacbyoi_Bx imagename


Infinity601V_pc15_unimacbyoi_Bx

| Build Command : noslim unimacbyoi chipRev Bx map swver 012

| Build Options : cmd_help_text demangle deps dualbuild factorymibs http


mgmtmibs

| Build Options : openssh76p1 pktc useformregistrar openssl quiet vpn warn_error


msc us rdiag

| Build Options : console vidcheck use_unimac0 d30 smisb spectrum_analyzer uda


fpm512 newleds

| Build Options : cacheopt power fap_assist multiprocmon thermal_monitor cmvendor


emta telnet

| Build Options : ip_rnvol itc rtrproxy virtnihal linux_erouter monolith


dualcmkey dualmode

| Build Options : turbo_wifi bbn eu ipv6 unimacbyoi map

+----------------------------------------------------------------------------------
--------------+

*
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* * * *
* * * * * * ***
* * * * * * * * *******************
* * * * * *
* *

Broadcom Corporation Reference Design

+----------------------------------------------------------------------------------
--------------+
|
|
| LATTICE
|
|
|
| Copyright (c) 1999 - 2023 Broadcom Corporation
|
|
|

| Revision : Prod_19.3
|
|

+----------------------------------------------------------------------------------
--------------+

| Build Date : Jul 20 2023

| Build Time : 14:52:07 (+0800)

| Build Path :
/home/raiderlu/Work/supergit/download/openbfc19.3/rbb_lattice/rg_apps/lattice

| Image Path :
/home/raiderlu/Work/supergit/download/openbfc19.3/rbb_lattice/images

| Build By : raiderlu

| Build Options : Build_System Build_Cm Build_Mta Build_Ethernet


Build_PacketAcceleration

| Build Options : Build_SpeedTest Build_Thermal Build_LAG Build_Gpio BUILD_BRIDGE

+----------------------------------------------------------------------------------
--------------+
| Linux Kernel
|
|
|

| Revision : 4.9.135-Prod_19.3#1 SMP Thu Jul 20 14:48:07 CST 2023

| Device Tree : rg.3390v0-vcm.dtb


|
|

+----------------------------------------------------------------------------------
--------------+
| RUNNER
|
|
|
| Copyright (c) 1999 - 2023 Broadcom Corporation
|
|
|

| Revision : rdp_gen_19.3.0.8

+----------------------------------------------------------------------------------
--------------+
| BOLT
|
|
|
| Copyright (c) 1999 - 2023 Broadcom Corporation
|
|
|

| Revision : 5.0

| Build Timestamp: 2021-07-30 13:19:19

| Build Tag : v5.00_B1

| Build By : raiderlu@raiderlu-ThinkCentre-M90t

| Revision(FSBL) : 5.0

+----------------------------------------------------------------------------------
--------------+

Starting TFTP of CM Version file!

Opening file 'cmversion.txt' on 172.31.255.40 for writing...


Informing RG CM energy detected = 1

Tftp transfer CM version file open successful!

Tftp transfer CM version file is complete!

Running the system...

Beginning Cable Modem operation...

Scanning for a downstream channel...


[00:00:21 01/01/1970] [CmDocsisCtlThread] BcmCmDownstreamScan::StartScan: Starting
DS scan

Type 'help' or '?' for a list of commands...


CM> Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 258.000 MHz PLC
Scanning 259.000 MHz PLC
Scanning 260.000 MHz PLC
Scanning 261.000 MHz PLC
Scanning 262.000 MHz PLC
Scanning 263.000 MHz PLC
Scanning 264.000 MHz PLC
Scanning 265.000 MHz PLC
Scanning 266.000 MHz PLC
Scanning 267.000 MHz PLC
Scanning 268.000 MHz PLC
Scanning 269.000 MHz PLC
Scanning 270.000 MHz PLC
Scanning 271.000 MHz PLC
Scanning 272.000 MHz PLC
Scanning 273.000 MHz PLC
Scanning 274.000 MHz PLC
Scanning 275.000 MHz PLC
Scanning 276.000 MHz PLC
Scanning 277.000 MHz PLC
Scanning 278.000 MHz PLC
Scanning 279.000 MHz PLC
Scanning 280.000 MHz PLC
Scanning 281.000 MHz PLC
Scanning 282.000 MHz PLC
Scanning 283.000 MHz PLC
Scanning 284.000 MHz PLC
Scanning 285.000 MHz PLC
Scanning 286.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 287.000 MHz PLC
Scanning 288.000 MHz PLC
Scanning 289.000 MHz PLC
Scanning 290.000 MHz PLC
Scanning 291.000 MHz PLC
Scanning 292.000 MHz PLC
Scanning 293.000 MHz PLC
Scanning 294.000 MHz PLC
Scanning 295.000 MHz PLC
Scanning 296.000 MHz PLC
Scanning 297.000 MHz PLC
Scanning 298.000 MHz PLC
Scanning 299.000 MHz PLC
Scanning 300.000 MHz PLC
Scanning 301.000 MHz PLC
Scanning 302.000 MHz PLC
Scanning 303.000 MHz PLC
Scanning 304.000 MHz PLC
Scanning 305.000 MHz PLC
Scanning 306.000 MHz PLC
Scanning 307.000 MHz PLC
Scanning 308.000 MHz PLC
Scanning 309.000 MHz PLC
Scanning 310.000 MHz PLC
Scanning 311.000 MHz PLC
Scanning 312.000 MHz PLC
Scanning 313.000 MHz PLC
Scanning 314.000 MHz PLC
Scanning 315.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 316.000 MHz PLC
Scanning 317.000 MHz PLC
Scanning 318.000 MHz PLC
Scanning 319.000 MHz PLC
Scanning 320.000 MHz PLC
Scanning 321.000 MHz PLC
Scanning 322.000 MHz PLC
Scanning 323.000 MHz PLC
Scanning 324.000 MHz PLC
Scanning 325.000 MHz PLC
Scanning 326.000 MHz PLC
Scanning 327.000 MHz PLC
Scanning 328.000 MHz PLC
Scanning 329.000 MHz PLC
Scanning 330.000 MHz PLC
Scanning 331.000 MHz PLC
Scanning 332.000 MHz PLC
Scanning 333.000 MHz PLC
Scanning 334.000 MHz PLC
Scanning 335.000 MHz PLC
Scanning 336.000 MHz PLC
Scanning 337.000 MHz PLC
Scanning 338.000 MHz PLC
Scanning 339.000 MHz PLC
Scanning 340.000 MHz PLC
Scanning 341.000 MHz PLC
cScanning 342.000 MHz PLC
Scanning 343.000 MHz PLC
dScanning 344.000 MHz PLC
/dScanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
oScanning 345.000 MHz PLC
cScanning 346.000 MHz PLC
Scanning 347.000 MHz PLC

Active Command Table: CM DOCSIS Control Thread Commands (docsis_ctl)

CM -> docsis_ctl

CM/DocsisCtl> Scanning 348.000 MHz PLC


sScanning 349.000 MHz PLC
Scanning 350.000 MHz PLC
Scanning 351.000 MHz PLC
cScanning 352.000 MHz PLC
CM/DocsisCtl> scan_stop

CM/DocsisCtl> Scanning 353.000 MHz PLC


Scan stopped...

CM/DocsisCtl>
CM/DocsisCtl>
CM/DocsisCtl>
CM/DocsisCtl>
CM/DocsisCtl>
CM/DocsisCtl> goto_ds 531
Moving to Downstream Frequency 531000000 Hz.
[00:00:34 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::Reset:
(CmDocsisCtlThread) DefaultSnmpAgentClass::RestartPendingEvent for Vendor CM
Agent w/ BRCM Factory Support
Vendor CM Agent w/ BRCM Factory Support updating ifTableLastChange.
Vendor CM Agent w/ BRCM Factory Support resetting to default state.
Vendor CM Agent w/ BRCM Factory Support destroying users...
Vendor CM Agent w/ BRCM Factory Support destroying notifies...
Vendor CM Agent w/ BRCM Factory Support destroying views...

CM/DocsisCtl> Allowing DOCS-CABLE-DEVICE-MIB IP filters.


Vendor CM Agent w/ BRCM Factory Support deferring traps.
Received RG Event 0x80000001 State 0x1
eRouter Linux WAN Down
[00:00:34 01/01/1970] [eRouterMsgPipe] eRouterMsgPipe::UpdateIpNetToMediaEntry:
(eRouterMsgPipe) eRouter IP address:0.0.0.0
00:00:34.880 01/01/1970 (CALC) mtaCmStatusInfo() - MTA is Signaled: *NOT-
OPERATIONAL* (Stat=0x1) emtaCurState = 0.
EmtaSnmpAgent::SoftReset
Pausing trap thread
emta factory agentResetting to default state.
emta factory agent destroying users...
emta factory agent destroying notifies...
emta factory agent destroying views...
emta factory agent entering RFC-2576 Coexistence security mode.
emta factory agent entering Basic/Hybrid flow provisioning mode.
Resuming trap thread
Stopping DHCP/ToD/TFTP (client requested)...
[00:00:34 01/01/1970] [CmDocsisIpThread] BcmEcosIpHalIf::RemoveIpv6Address: (IP
Stack1 HalIf) ERROR - Failed to remove IPv6 address fe80::fe4a:e9ff:fede:ad88/64
from the stack!
[00:00:34 01/01/1970] [CmDocsisIpThread] BcmDhcpV6ClientIf::ReleaseAddresses:
(DHCPv6 ClientIf for IP Stack1) ERROR - IA state is initial; there is no address to
release.
BcmDocsis3DsMacEnableMulticastDsidForwarding 0; primary DS = 0
SCQAM DSID filter control = 0x00
OFDM DSID filter control = 0x01
Deleting DOCSIS 1.0 CoS Settings for SID 0
[00:00:35 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows:
(DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along
with associated Classifiers and PHS rules...
[00:00:35 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState:
(CmDocsisCtlThread)
[00:00:35 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Primary SID for usHwChannel 0 to 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 1
Updating US chan 8 data Profile test msg for Sid: 0x0.
Updating US chan 9 data Profile test msg for Sid: 0x0.
CM/DocsisCtl> BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=false
[00:00:35 01/01/1970] [CmDocsisCtlThread] BcmCmMultiDsHelper::PreRegDsChanChange:
target freq hz = 531000000
reason string = ConsoleCmdOverride
CmInitReason = 1

Starting DS scanning at 531000000 Hz...


[00:00:35 01/01/1970] [CmDocsisCtlThread] BcmCmDownstreamScan::StartScan: Starting
DS scan
CM/DocsisCtl> Scanning 531.000 MHz PLC/SC-QAM (ConsoleCmdOverride) locked SC-QAM
[00:00:36 01/01/1970] [CmDocsisCtlThread] BcmCmDsChan::DsLockOk: (BcmCmDsChan 0)
hwRxId=0 freq=0 dcid=0

******************************************
DOWNSTREAM STATUS
******************************************
HW Channel ID = 0
Phy type: SC-QAM
DS active chan settings:
ds chan id = 0
center freq, Hz = 531000000 Hz
primary capable = false
status event rpt bitmask = 0

CM HW Detected DS Phy Settings:


Center Freq, Hz = 531000000
QAM = Locked
FEC = Locked
Carrier Freq Offset, kHz = 0
Channel Width, Hz = 8000000
Modulation = Qam256
Interleaver = Taps12Incr17
Symbol Rate, sym/sec = 6952000

******************************************

[00:00:36 01/01/1970] [CmDocsisCtlThread]


BcmCmMacDomainSetsState::StartDsMacMddInit:
**********************************************
Waiting for MDDs...
**********************************************

CM/DocsisCtl>
BcmCmDocsisCtlMsgACT::HandleEvent() @time=37660 event_code=4 (kCmPriDsMddSetsOk)
MDD diplexer band edge not specified.
MDD Plant US Frequency Range = extended.
Requested Spectrum = US:(0 MHz..85 MHz) DS:(0 MHz..0 MHz)
Best Match = 0: US:(5 MHz..85 MHz) DS:(108 MHz..1218 MHz)
Switchable diplexer ECN support disabled. NOT switching diplexer.
[00:00:37 01/01/1970] [CmDocsisCtlThread]
BcmCmMdDsSgDiscState::TrimSgSetWithoutThisDcid:
1 candidate MD-DS-SG remain after TrimSgSetWithoutThisDcid( target_dcid )
for target_dcid=0x01 (1)
[00:00:37 01/01/1970] [CmDocsisCtlThread] BcmCmMdDsSgDiscState::StartMdDsSgDisc:
special case: one and only one MD-DS-SG contains mdd_dcid.
fMdDsSgId=0x1d (29)
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , M-d++a+i-+Ty-eA+dA++e|:
i_L-ca+A++e|A: 1
Chec+ +D_A++e|A
Cha++e+ Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1

MD-DS-SG discovery info:

fCmMdDsSgDiscState = 6 (kMdDsSgDiscDone)
fMdDsSgId = 0x1d (29)
fMdDsSgDiscovered = 1

Trimmed Candidate Downstream Service Group Settings List: list size = 1

sgid size member dcid's


---- ---- -------------
29 34 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
27 28 29 30 31 32 159 160

Downstream Active Channel Settings List:

dcid type frequency prim capable rpt enable mod/annex or PLC params
---- -------- --------- ------------ ---------- -----------------------
1 SC-QAM 531000000 y 0x36 256QAM/AnnexA
2 SC-QAM 539000000 y 0x36 256QAM/AnnexA
3 SC-QAM 547000000 y 0x36 256QAM/AnnexA
4 SC-QAM 555000000 y 0x36 256QAM/AnnexA
5 SC-QAM 563000000 y 0x36 256QAM/AnnexA
6 SC-QAM 571000000 y 0x36 256QAM/AnnexA
7 SC-QAM 579000000 y 0x36 256QAM/AnnexA
8 SC-QAM 587000000 y 0x36 256QAM/AnnexA
9 SC-QAM 595000000 y 0x36 256QAM/AnnexA
10 SC-QAM 603000000 y 0x36 256QAM/AnnexA
11 SC-QAM 611000000 y 0x36 256QAM/AnnexA
12 SC-QAM 619000000 y 0x36 256QAM/AnnexA
13 SC-QAM 627000000 y 0x36 256QAM/AnnexA
14 SC-QAM 635000000 y 0x36 256QAM/AnnexA
15 SC-QAM 643000000 y 0x36 256QAM/AnnexA
16 SC-QAM 651000000 y 0x36 256QAM/AnnexA
17 SC-QAM 659000000 y 0x36 256QAM/AnnexA
18 SC-QAM 667000000 y 0x36 256QAM/AnnexA
19 SC-QAM 675000000 y 0x36 256QAM/AnnexA
20 SC-QAM 683000000 y 0x36 256QAM/AnnexA
21 SC-QAM 691000000 y 0x36 256QAM/AnnexA
22 SC-QAM 699000000 y 0x36 256QAM/AnnexA
23 SC-QAM 707000000 y 0x36 256QAM/AnnexA
24 SC-QAM 715000000 y 0x36 256QAM/AnnexA
25 SC-QAM 723000000 y 0x36 256QAM/AnnexA
26 SC-QAM 731000000 y 0x36 256QAM/AnnexA
27 SC-QAM 739000000 y 0x36 256QAM/AnnexA
28 SC-QAM 747000000 y 0x36 256QAM/AnnexA
29 SC-QAM 755000000 y 0x36 256QAM/AnnexA
30 SC-QAM 763000000 y 0x36 256QAM/AnnexA
31 SC-QAM 771000000 y 0x36 256QAM/AnnexA
32 SC-QAM 779000000 y 0x36 256QAM/AnnexA
159 OFDM PLC 897000000 n 0x36 25Khz/5us/0.625us
160 OFDM PLC 361000000 n 0x36 50Khz/0.9375us/0.625us

Trimmed Downstream Ambiguity Resolution Frequency List: list size = 3

531000000-sc_qam 539000000-sc_qam 547000000-sc_qam

visible dcid set = 1

freq with visible dcid set = 531000000

BcmCmDocsisCtlMsgACT::HandleEvent() @time=38260 event_code=11 (kCmMdDsSgDiscDone)


BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=true
[00:00:38 01/01/1970] [CmDocsisCtlThread]
BcmDocsisCmHalIf::SetPrimaryDownstreamChannel: (DOCSIS CableModem HalIf)
Installing primary downstream channel index: 0
SetRatios called with primary downstream channel number = 0
AnnexMode[0] = 1 QAM_Mode[0] = 256
Num/Den = 869/1280
3390 SCDMA/OFDM mode - ChannelNumber = 0 Numerator = 869 Denominator = 1280
CM/DocsisCtl> ... TCOFDM - DTR is now locked.... (T2=150ms Sync=14)

Given a 216 MHz TCOFDM clock, the nominal value for the DTR FCW is 0xC22E45067
The DTR FCW is 0xc22e9115 - that value is good (5, within 100 ppm)
*
* Starting latency compensation thread.
*
Kicked off the DPLL
LE Done bit was set
LE Done bit was set
SCQAM DS clock source.
PLL in Leaky mode.
PLL Fn = 6, k1 = 18, k2 = 19
[00:00:38 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context=5 (ConsoleCmdOverride)
[00:00:38 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper) Locked on the downstream. Waiting for UCDs...
CM/DocsisCtl> [00:00:40 01/01/1970] [CmDocsisCtlThread]
BcmCmMultiUsHelper::TmUcdRxTimerEvent: (Cm Multi US Helper)
ucd gathering ok.

[00:00:40 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper) state at
entry:

Channel targeting:
Downstream:
fTargetDsFreqHz = 0x1fa66ac0 (531000000)
fCurrentDsFreqHz = 0x1fa66ac0 (531000000)
fStoredDsFreqHz = 0x29020c00 (688000000)

Upstream:
fDestSingleTxTargetUsChanId = 0 (0)
fTargetingContext = 5 (ConsoleCmdOverride)

Startup UCD Selection Info:

low priority candidate ucid list = 4 3 1 2 5 8 7 6


happy home ucid set = 1 2 3 4

Upstream Active Channel Settings:

ucid rpt enable sel prio MAP source dcid's


---- ---------- -------- -----------------
1 0x1c0 0
2 0x1c0 0
3 0x1c0 0
4 0x1c0 0
5 0x1c0 0
6 0x1c0 0
7 0x1c0 0
8 0x1c0 0

BcmCmUsTargetMset (a.k.a. usable UCDs gathered during startup):

us config
phy change ranging scdma
type ucid dcid count tried? enabled?
---- ---- ---- ------ ------- --------
3 1 1 4 n n
3 2 1 4 n n
3 3 1 4 n n
3 4 1 4 n n
3 5 1 4 n n
3 6 1 4 n n
3 7 1 4 n n
3 8 1 4 n n

[00:00:40 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper)
starting docs3 upstream initialization on target ucid=4
with upstream phy type 3 on hardware transmitter index 0

[00:00:40 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::ExecuteTccCmd: hwTxId=0


docs ucid=0
[00:00:40 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0
[00:00:40 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::InstallUsSets: Installing
UCD w/ucid for UCID=4 for CM hardware tx chan 0

[00:00:40 01/01/1970] [CmDocsisCtlThread]


BcmCmUsSetsState::TestAndLaunchUsTimeSync: starting upstream time sync
acquisition...
[00:00:40 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefOk: (Cm
Multi US Helper) target hwTxId=0
[00:00:40 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::UsTimeRefOk: upstream time
sync acquired for fHwTxId=0

== Beginning initial ranging for Docsis UCID 4 ==


Minimum transmit power is 17 dBmV
Maximum transmit power is 53 dBmV
Stored power level for UCID 4 is 42.25 dBmV
Using per transmitter stored initial upstream power = 42.25 dBmV hwTxId = 0 docsis
UCID = 4
RNG-RSP UsChanId=4 Adj: tim=1899 freq=-56 Stat=Continue (CmdPwr (UsChanId-dBmV):
(4-41.25) )
[00:00:41 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0xc9
RNG-RSP UsChanId=4 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (4-
41.25) )
RNG-RSP UsChanId=4 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (4-
41.25) )
RNG-RSP UsChanId=4 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (4-
41.25) )
RNG-RSP UsChanId=4 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (4-
41.75) )
RNG-RSP UsChanId=4 Adj: tim=0 freq=0 Stat=Success (CmdPwr (UsChanId-dBmV): (4-
41.25) )
[00:00:46 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::FirstRngSuccess:
(CmDocsisCtlThread)
first RNG-RSP w/status==SUCCESS for hwTxId=0 and DOCSIS ucid=4
[00:00:46 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::LaunchEaeBpkm:
(CmDocsisCtlThread) BPKM enabled. starting Early Authentication and Encryption BPKM
key requests. Primary Sid = 201
CM/DocsisCtl> Bandwidth request failure! Status = 0

BcmCmUsChanTimerMuxACT::HandleEvent() @time=235980 fTimerType=5


(kT4NoStationMaint) hwTxId=0 docs ucid=4
[00:03:55 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::T4NoStationMaintEvent: ERROR - no Station Maint map op error.
hwTxId=0 docs ucid=4
[00:03:56 01/01/1970] [CmDocsisCtlThread]
BcmCmUsRangingState::CommonRngErrorHandler: reason=10 (T4NoStationMaintTimeout)
hwTxId=0 docs ucid=4
[00:03:56 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) Purging DS
frequency 531000000 from current scan pass due to pre-registration restart error
[00:03:56 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) reinit MAC #1:
T4NoStationMaintTimeout

[00:03:56 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::Reset:


(CmDocsisCtlThread) DefaultSnmpAgentClass::RestartPendingEvent for Vendor CM
Agent w/ BRCM Factory Support
Logging event: Received Response to Broadcast Maintenance Request, But no Unicast
Maintenance opportunities received - T4 time out;CM-MAC=fc:4a:e9:de:ad:88;CMTS-
MAC=28:52:61:fa:d8:78;CM-QOS=1.1;CM-VER=3.1;
Vendor CM Agent w/ BRCM Factory Support updating ifTableLastChange.
Vendor CM Agent w/ BRCM Factory Support resetting to default state.
Vendor CM Agent w/ BRCM Factory Support destroying users...
Vendor CM Agent w/ BRCM Factory Support destroying notifies...
Vendor CM Agent w/ BRCM Factory Support destroying views...
Allowing DOCS-CABLE-DEVICE-MIB IP filters.
Vendor CM Agent w/ BRCM Factory Support deferring traps.
Received RG Event 0x80000001 State 0x1
eRouter Linux WAN Down
[00:03:56 01/01/1970] [eRouterMsgPipe] eRouterMsgPipe::UpdateIpNetToMediaEntry:
(eRouterMsgPipe) eRouter IP address:0.0.0.0
00:03:56.270 01/01/1970 (CALC) mtaCmStatusInfo() - MTA is Signaled: *NOT-
OPERATIONAL* (Stat=0x1) emtaCurState = 0.
EmtaSnmpAgent::SoftReset
Pausing trap thread
emta factory agentResetting to default state.
emta factory agent destroying users...
emta factory agent destroying notifies...
emta factory agent destroying views...
emta factory agent entering RFC-2576 Coexistence security mode.
emta factory agent entering Basic/Hybrid flow provisioning mode.
Resuming trap thread
Stopping DHCP/ToD/TFTP (client requested)...
[00:03:56 01/01/1970] [CmDocsisIpThread] BcmEcosIpHalIf::RemoveIpv6Address: (IP
Stack1 HalIf) ERROR - Failed to remove IPv6 address fe80::fe4a:e9ff:fede:ad88/64
from the stack!
[00:03:56 01/01/1970] [CmDocsisIpThread] BcmDhcpV6ClientIf::ReleaseAddresses:
(DHCPv6 ClientIf for IP Stack1) ERROR - IA state is initial; there is no address to
release.
BcmDocsis3DsMacEnableMulticastDsidForwarding 0; primary DS = 0
SCQAM DSID filter control = 0x00
OFDM DSID filter control = 0x01
Deleting DOCSIS 1.0 CoS Settings for SID 0xc9
[00:03:56 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows:
(DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along
with associated Classifiers and PHS rules...
[00:03:56 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState:
(CmDocsisCtlThread)
[00:03:56 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Primary SID for usHwChannel 0 to 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 1
Updating US chan 8 data Profile test msg for Sid: 0x0.
Updating US chan 9 data Profile test msg for Sid: 0x0.
CM/DocsisCtl> BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=false
[00:03:57 01/01/1970] [CmDocsisCtlThread] BcmCmMultiDsHelper::PreRegDsChanChange:
target freq hz = 0
reason string = ErrorRecovery
CmInitReason = 16

Starting DS scanning...
[00:03:57 01/01/1970] [CmDocsisCtlThread] BcmCmDownstreamScan::StartScan: Starting
DS scan
Checking for cable cut...

[00:03:57 01/01/1970] [DocsisCmHalControlThread]


BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL declared PULSE lost!
CM/DocsisCtl> Plant power is 15.55

Cable connected

Scanning 354.000 MHz PLC


Scanning 355.000 MHz PLC
CM/DocsisCtl> Scanning 356.000 MHz PLC
Scanning 357.000 MHz PLC
Scanning 358.000 MHz PLC
Scanning 359.000 MHz PLC
Scanning 360.000 MHz PLC
Scanning 361.000 MHz PLC locked PLC
[00:03:58 01/01/1970] [CmDocsisCtlThread] BcmCmDsChanOfdm::DsLockOk:
(BcmCmDsChanOfdm) hwRxId=32 freq=0 dcid=0 PLC found
[00:03:58 01/01/1970] [CmDocsisCtlThread] BcmCmDsChanOfdm::StartOcdDpdGathering:
(BcmCmDsChanOfdm) starting OCD/DPD gathering on PLC
[00:03:58 01/01/1970] [CmDocsisCtlThread] BcmCmDsChanOfdm::OcdSetsRx:
(BcmCmDsChanOfdm) hwRxId=32 dcid=0
[00:03:58 01/01/1970] [CmDocsisCtlThread] BcmCmDsChanOfdm::DpdSetsRx:
(BcmCmDsChanOfdm) Received DPD on hwRxId=32 dcid=0 for assigned Profile NCP
[00:03:58 01/01/1970] [CmDocsisCtlThread] BcmCmDsChanOfdm::DpdSetsRx:
(BcmCmDsChanOfdm) Received DPD on hwRxId=32 dcid=0 for assigned Profile A
[00:03:58 01/01/1970] [CmDocsisCtlThread]
BcmCmDsChanOfdm::DetectOcdDpdGatheringPlcDone: (BcmCmDsChanOfdm) hwRxId=32 dcid=0
OCD/DPD gathered via PLC. install OCD settings.
OCD/DPD Filtering being configured for hwRxId=32 on FilCh=0[PLC=0/ProfA=1] ->
filter enable = 1. TimeMs=239609
[00:03:58 01/01/1970] [CmDocsisCtlThread] BcmCmDsChanOfdm::OcdInstallOk:
(BcmCmDsChanOfdm) hwRxId=32 dcid=160 OCD installed.
[00:03:58 01/01/1970] [CmDocsisCtlThread] BcmCmDsOfdmProfileState::InstallDpdSets:
HwRxId=32: installing DPD for profile NCP
CM/DocsisCtl> [00:03:59 01/01/1970] [CmDocsisCtlThread]
BcmCmDsOfdmProfileState::InstallDpdSets: HwRxId=32: installing DPD for profile A
Ofdm0: profile0 LOCK in 3 ms!
[00:03:59 01/01/1970] [CmDocsisCtlThread] BcmCmDsOfdmProfileState::FecLockOk:
hwRxId=32 dcid=160 profId=255 (NCP)
CM/DocsisCtl> [00:04:00 01/01/1970] [CmDocsisCtlThread]
BcmCmDsOfdmProfileState::FecLockOk: hwRxId=32 dcid=160 profId=0 (A)
[00:04:00 01/01/1970] [CmDocsisCtlThread]
BcmCmMacDomainSetsState::StartDsMacMddInit:
**********************************************
Waiting for MDDs...
**********************************************

CM/DocsisCtl> [00:04:06 01/01/1970] [CmDocsisCtlThread]


BcmCmMacDomainSetsState::TmNoMddEvent:
MDD timeout during kGatherInitialPriDsMddSets

BcmCmDocsisCtlMsgACT::HandleEvent() @time=246040 event_code=10


(kCmPriDsMddSetsNotRx)

***************************************************************

No MDD timeout ==> If no MDDs are detected on the candidate


Primary Downstream Channel, then the CM MUST abort the attempt
to utilize the current downstream channel

***************************************************************

[00:04:06 01/01/1970] [CmDocsisCtlThread]


BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) Purging DS
frequency 361000000 from current scan pass due to pre-registration restart error
[00:04:06 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) reinit MAC #2:
NoMddTimeout

[00:04:06 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::Reset:


(CmDocsisCtlThread) DefaultSnmpAgentClass::RestartPendingEvent for Vendor CM
Agent w/ BRCM Factory Support
Logging event: Lost MDD Timeout;CM-MAC=fc:4a:e9:de:ad:88;CMTS-
MAC=00:00:00:00:00:00;CM-QOS=1.1;CM-VER=3.1;
Vendor CM Agent w/ BRCM Factory Support updating ifTableLastChange.
Vendor CM Agent w/ BRCM Factory Support resetting to default state.
Vendor CM Agent w/ BRCM Factory Support destroying users...
Vendor CM Agent w/ BRCM Factory Support destroying notifies...
Vendor CM Agent w/ BRCM Factory Support destroying views...
Allowing DOCS-CABLE-DEVICE-MIB IP filters.
Vendor CM Agent w/ BRCM Factory Support deferring traps.
Received RG Event 0x80000001 State 0x1
eRouter Linux WAN Down
[00:04:06 01/01/1970] [eRouterMsgPipe] eRouterMsgPipe::UpdateIpNetToMediaEntry:
(eRouterMsgPipe) eRouter IP address:0.0.0.0
00:04:06.320 01/01/1970 (CALC) mtaCmStatusInfo() - MTA is Signaled: *NOT-
OPERATIONAL* (Stat=0x1) emtaCurState = 0.
EmtaSnmpAgent::SoftReset
Pausing trap thread
emta factory agentResetting to default state.
emta factory agent destroying users...
emta factory agent destroying notifies...
emta factory agent destroying views...
emta factory agent entering RFC-2576 Coexistence security mode.
emta factory agent entering Basic/Hybrid flow provisioning mode.
Resuming trap thread
Stopping DHCP/ToD/TFTP (client requested)...
[00:04:06 01/01/1970] [CmDocsisIpThread] BcmEcosIpHalIf::RemoveIpv6Address: (IP
Stack1 HalIf) ERROR - Failed to remove IPv6 address fe80::fe4a:e9ff:fede:ad88/64
from the stack!
[00:04:06 01/01/1970] [CmDocsisIpThread] BcmDhcpV6ClientIf::ReleaseAddresses:
(DHCPv6 ClientIf for IP Stack1) ERROR - IA state is initial; there is no address to
release.
BcmDocsis3DsMacEnableMulticastDsidForwarding 0; primary DS = 0
SCQAM DSID filter control = 0x00
OFDM DSID filter control = 0x01
Deleting DOCSIS 1.0 CoS Settings for SID 0
[00:04:06 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows:
(DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along
with associated Classifiers and PHS rules...
[00:04:06 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState:
(CmDocsisCtlThread)
[00:04:06 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Primary SID for usHwChannel 0 to 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 1
Updating US chan 8 data Profile test msg for Sid: 0x0.
Updating US chan 9 data Profile test msg for Sid: 0x0.
CM/DocsisCtl> BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=false
[00:04:07 01/01/1970] [CmDocsisCtlThread] BcmCmMultiDsHelper::PreRegDsChanChange:
target freq hz = 0
reason string = ErrorRecovery
CmInitReason = 16

Starting DS scanning...
[00:04:07 01/01/1970] [CmDocsisCtlThread] BcmCmDownstreamScan::StartScan: Starting
DS scan
Scanning 362.000 MHz PLC
Scanning 363.000 MHz PLC
CM/DocsisCtl> Scanning 364.000 MHz PLC
Scanning 365.000 MHz PLC
Scanning 366.000 MHz PLC
Scanning 367.000 MHz PLC
Scanning 368.000 MHz PLC
Scanning 369.000 MHz PLC
Scanning 370.000 MHz PLC
Scanning 371.000 MHz PLC
Scanning 372.000 MHz PLC
Scanning 373.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 374.000 MHz PLC
Scanning 375.000 MHz PLC
Scanning 376.000 MHz PLC
Scanning 377.000 MHz PLC
Scanning 378.000 MHz PLC
Scanning 379.000 MHz PLC
Scanning 380.000 MHz PLC
Scanning 381.000 MHz PLC
Scanning 382.000 MHz PLC
Scanning 383.000 MHz PLC
Scanning 384.000 MHz PLC
Scanning 385.000 MHz PLC
Scanning 386.000 MHz PLC
Scanning 387.000 MHz PLC
Scanning 388.000 MHz PLC
Scanning 389.000 MHz PLC
Scanning 390.000 MHz PLC
Scanning 391.000 MHz PLC
Scanning 392.000 MHz PLC
Scanning 393.000 MHz PLC
Scanning 394.000 MHz PLC
Scanning 395.000 MHz PLC
Scanning 396.000 MHz PLC
Scanning 397.000 MHz PLC
Scanning 398.000 MHz PLC
Scanning 399.000 MHz PLC
Scanning 400.000 MHz PLC
Scanning 401.000 MHz PLC
Scanning 402.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 403.000 MHz PLC
Scanning 404.000 MHz PLC
Scanning 405.000 MHz PLC
Scanning 406.000 MHz PLC
Scanning 407.000 MHz PLC
Scanning 408.000 MHz PLC
Scanning 409.000 MHz PLC
Scanning 410.000 MHz PLC
Scanning 411.000 MHz PLC
Scanning 412.000 MHz PLC
Scanning 413.000 MHz PLC
Scanning 414.000 MHz PLC
Scanning 415.000 MHz PLC
Scanning 416.000 MHz PLC
Scanning 417.000 MHz PLC
Scanning 418.000 MHz PLC
Scanning 419.000 MHz PLC
Scanning 420.000 MHz PLC
Scanning 421.000 MHz PLC
Scanning 422.000 MHz PLC
Scanning 423.000 MHz PLC
Scanning 424.000 MHz PLC
Scanning 425.000 MHz PLC
Scanning 426.000 MHz PLC
Scanning 427.000 MHz PLC
Scanning 428.000 MHz PLC
Scanning 429.000 MHz PLC
Scanning 430.000 MHz PLC
Scanning 431.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 432.000 MHz PLC
Scanning 433.000 MHz PLC
Scanning 434.000 MHz PLC
Scanning 435.000 MHz PLC
Scanning 436.000 MHz PLC
Scanning 437.000 MHz PLC
Scanning 438.000 MHz PLC
Scanning 439.000 MHz PLC
Scanning 440.000 MHz PLC
Scanning 441.000 MHz PLC
Scanning 442.000 MHz PLC
Scanning 443.000 MHz PLC
Scanning 444.000 MHz PLC
Scanning 445.000 MHz PLC
Scanning 446.000 MHz PLC
Scanning 447.000 MHz PLC
Scanning 448.000 MHz PLC
Scanning 449.000 MHz PLC
Scanning 450.000 MHz PLC
Scanning 451.000 MHz PLC
Scanning 452.000 MHz PLC
Scanning 453.000 MHz PLC
Scanning 454.000 MHz PLC
Scanning 455.000 MHz PLC
Scanning 456.000 MHz PLC
Scanning 457.000 MHz PLC
Scanning 458.000 MHz PLC
Scanning 459.000 MHz PLC
Scanning 460.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 461.000 MHz PLC
Scanning 462.000 MHz PLC
Scanning 463.000 MHz PLC
Scanning 464.000 MHz PLC
Scanning 465.000 MHz PLC
Scanning 466.000 MHz PLC
Scanning 467.000 MHz PLC
Scanning 468.000 MHz PLC
Scanning 469.000 MHz PLC
Scanning 470.000 MHz PLC
Scanning 471.000 MHz PLC
Scanning 472.000 MHz PLC
Scanning 473.000 MHz PLC
Scanning 474.000 MHz PLC
Scanning 475.000 MHz PLC
Scanning 476.000 MHz PLC
Scanning 477.000 MHz PLC
Scanning 478.000 MHz PLC
Scanning 479.000 MHz PLC
Scanning 480.000 MHz PLC
Scanning 481.000 MHz PLC
Scanning 482.000 MHz PLC
Scanning 483.000 MHz PLC
Scanning 484.000 MHz PLC
Scanning 485.000 MHz PLC
Scanning 486.000 MHz PLC
Scanning 487.000 MHz PLC
Scanning 488.000 MHz PLC
Scanning 489.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 490.000 MHz PLC
Scanning 491.000 MHz PLC
Scanning 492.000 MHz PLC
Scanning 493.000 MHz PLC
Scanning 494.000 MHz PLC
Scanning 495.000 MHz PLC
Scanning 496.000 MHz PLC
Scanning 497.000 MHz PLC
Scanning 498.000 MHz PLC
Scanning 499.000 MHz PLC
Scanning 500.000 MHz PLC
Scanning 501.000 MHz PLC
Scanning 502.000 MHz PLC
Scanning 503.000 MHz PLC
Scanning 504.000 MHz PLC
Scanning 505.000 MHz PLC
Scanning 506.000 MHz PLC
Scanning 507.000 MHz PLC
Scanning 508.000 MHz PLC
Scanning 509.000 MHz PLC
Scanning 510.000 MHz PLC
Scanning 511.000 MHz PLC
Scanning 512.000 MHz PLC
Scanning 513.000 MHz PLC
Scanning 514.000 MHz PLC
Scanning 515.000 MHz PLC
Scanning 516.000 MHz PLC
Scanning 517.000 MHz PLC
Scanning 518.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 519.000 MHz PLC
Scanning 520.000 MHz PLC
Scanning 521.000 MHz PLC
Scanning 522.000 MHz PLC
Scanning 523.000 MHz PLC
Scanning 524.000 MHz PLC
Scanning 525.000 MHz PLC
Scanning 526.000 MHz PLC
Scanning 527.000 MHz PLC
Scanning 528.000 MHz PLC
Scanning 529.000 MHz PLC
Scanning 530.000 MHz PLC
Scanning 531.000 MHz purged
Scanning 532.000 MHz PLC
Scanning 533.000 MHz PLC
Scanning 534.000 MHz PLC
Scanning 535.000 MHz PLC
Scanning 536.000 MHz PLC
Scanning 537.000 MHz PLC
Scanning 538.000 MHz PLC
Scanning 539.000 MHz PLC
Scanning 540.000 MHz PLC
Scanning 541.000 MHz PLC
Scanning 542.000 MHz PLC
Scanning 543.000 MHz PLC
Scanning 544.000 MHz PLC
Scanning 545.000 MHz PLC
Scanning 546.000 MHz PLC
Scanning 547.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 548.000 MHz PLC
Scanning 549.000 MHz PLC
Scanning 550.000 MHz PLC
Scanning 551.000 MHz PLC
Scanning 552.000 MHz PLC
Scanning 553.000 MHz PLC
Scanning 554.000 MHz PLC
Scanning 555.000 MHz PLC
Scanning 556.000 MHz PLC
Scanning 557.000 MHz PLC
Scanning 558.000 MHz PLC
Scanning 559.000 MHz PLC
Scanning 560.000 MHz PLC
Scanning 561.000 MHz PLC
Scanning 562.000 MHz PLC
Scanning 563.000 MHz PLC
Scanning 564.000 MHz PLC
Scanning 565.000 MHz PLC
Scanning 566.000 MHz PLC
Scanning 567.000 MHz PLC
Scanning 568.000 MHz PLC
Scanning 569.000 MHz PLC
Scanning 570.000 MHz PLC
Scanning 571.000 MHz PLC
Scanning 572.000 MHz PLC
Scanning 573.000 MHz PLC
Scanning 574.000 MHz PLC
Scanning 575.000 MHz PLC
Scanning 576.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 577.000 MHz PLC
Scanning 578.000 MHz PLC
Scanning 579.000 MHz PLC
Scanning 580.000 MHz PLC
Scanning 581.000 MHz PLC
Scanning 582.000 MHz PLC
Scanning 583.000 MHz PLC
Scanning 584.000 MHz PLC
Scanning 585.000 MHz PLC
Scanning 586.000 MHz PLC
Scanning 587.000 MHz PLC
Scanning 588.000 MHz PLC
Scanning 589.000 MHz PLC
Scanning 590.000 MHz PLC
Scanning 591.000 MHz PLC
Scanning 592.000 MHz PLC
Scanning 593.000 MHz PLC
Scanning 594.000 MHz PLC
Scanning 595.000 MHz PLC
Scanning 596.000 MHz PLC
Scanning 597.000 MHz PLC
Scanning 598.000 MHz PLC
Scanning 599.000 MHz PLC
Scanning 600.000 MHz PLC
Scanning 601.000 MHz PLC
Scanning 602.000 MHz PLC
Scanning 603.000 MHz PLC
Scanning 604.000 MHz PLC
Scanning 605.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 606.000 MHz PLC
Scanning 607.000 MHz PLC
Scanning 608.000 MHz PLC
Scanning 609.000 MHz PLC
Scanning 610.000 MHz PLC
Scanning 611.000 MHz PLC
Scanning 612.000 MHz PLC
Scanning 613.000 MHz PLC
Scanning 614.000 MHz PLC
Scanning 615.000 MHz PLC
Scanning 616.000 MHz PLC
Scanning 617.000 MHz PLC
Scanning 618.000 MHz PLC
Scanning 619.000 MHz PLC
Scanning 620.000 MHz PLC
Scanning 621.000 MHz PLC
Scanning 622.000 MHz PLC
Scanning 623.000 MHz PLC
Scanning 624.000 MHz PLC
Scanning 625.000 MHz PLC
Scanning 626.000 MHz PLC
Scanning 627.000 MHz PLC
Scanning 628.000 MHz PLC
Scanning 629.000 MHz PLC
Scanning 630.000 MHz PLC
Scanning 631.000 MHz PLC
Scanning 632.000 MHz PLC
Scanning 633.000 MHz PLC
Scanning 634.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 635.000 MHz PLC
Scanning 636.000 MHz PLC
Scanning 637.000 MHz PLC
Scanning 638.000 MHz PLC
Scanning 639.000 MHz PLC
Scanning 640.000 MHz PLC
Scanning 641.000 MHz PLC
Scanning 642.000 MHz PLC
Scanning 643.000 MHz PLC
Scanning 644.000 MHz PLC
Scanning 645.000 MHz PLC
Scanning 646.000 MHz PLC
Scanning 647.000 MHz PLC
Scanning 648.000 MHz PLC
Scanning 649.000 MHz PLC
Scanning 650.000 MHz PLC
Scanning 651.000 MHz PLC
Scanning 652.000 MHz PLC
Scanning 653.000 MHz PLC
Scanning 654.000 MHz PLC
Scanning 655.000 MHz PLC
Scanning 656.000 MHz PLC
Scanning 657.000 MHz PLC
Scanning 658.000 MHz PLC
Scanning 659.000 MHz PLC
Scanning 660.000 MHz PLC
Scanning 661.000 MHz PLC
Scanning 662.000 MHz PLC
Scanning 663.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 664.000 MHz PLC
Scanning 665.000 MHz PLC
Scanning 666.000 MHz PLC
Scanning 667.000 MHz PLC
Scanning 668.000 MHz PLC
Scanning 669.000 MHz PLC
Scanning 670.000 MHz PLC
Scanning 671.000 MHz PLC
Scanning 672.000 MHz PLC
Scanning 673.000 MHz PLC
Scanning 674.000 MHz PLC
Scanning 675.000 MHz PLC
Scanning 676.000 MHz PLC
Scanning 677.000 MHz PLC
Scanning 678.000 MHz PLC
Scanning 679.000 MHz PLC
Scanning 680.000 MHz PLC
Scanning 681.000 MHz PLC
Scanning 682.000 MHz PLC
Scanning 683.000 MHz PLC
Scanning 684.000 MHz PLC
Scanning 685.000 MHz PLC
Scanning 686.000 MHz PLC
Scanning 687.000 MHz PLC
Scanning 688.000 MHz PLC
Scanning 689.000 MHz PLC
Scanning 690.000 MHz PLC
Scanning 691.000 MHz PLC
Scanning 692.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 693.000 MHz PLC
Scanning 694.000 MHz PLC
Scanning 695.000 MHz PLC
Scanning 696.000 MHz PLC
Scanning 697.000 MHz PLC
Scanning 698.000 MHz PLC
Scanning 699.000 MHz PLC
Scanning 700.000 MHz PLC
Scanning 701.000 MHz PLC
Scanning 702.000 MHz PLC
Scanning 703.000 MHz PLC
Scanning 704.000 MHz PLC
Scanning 705.000 MHz PLC
Scanning 706.000 MHz PLC
Scanning 707.000 MHz PLC
Scanning 708.000 MHz PLC
Scanning 709.000 MHz PLC
Scanning 710.000 MHz PLC
Scanning 711.000 MHz PLC
Scanning 712.000 MHz PLC
Scanning 713.000 MHz PLC
Scanning 714.000 MHz PLC
Scanning 715.000 MHz PLC
Scanning 716.000 MHz PLC
Scanning 717.000 MHz PLC
Scanning 718.000 MHz PLC
Scanning 719.000 MHz PLC
Scanning 720.000 MHz PLC
Scanning 721.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 722.000 MHz PLC
Scanning 723.000 MHz PLC
Scanning 724.000 MHz PLC
Scanning 725.000 MHz PLC
Scanning 726.000 MHz PLC
Scanning 727.000 MHz PLC
Scanning 728.000 MHz PLC
Scanning 729.000 MHz PLC
Scanning 730.000 MHz PLC
Scanning 731.000 MHz PLC
Scanning 732.000 MHz PLC
Scanning 733.000 MHz PLC
Scanning 734.000 MHz PLC
Scanning 735.000 MHz PLC
Scanning 736.000 MHz PLC
Scanning 737.000 MHz PLC
Scanning 738.000 MHz PLC
Scanning 739.000 MHz PLC
Scanning 740.000 MHz PLC
Scanning 741.000 MHz PLC
Scanning 742.000 MHz PLC
Scanning 743.000 MHz PLC
Scanning 744.000 MHz PLC
Scanning 745.000 MHz PLC
Scanning 746.000 MHz PLC
Scanning 747.000 MHz PLC
Scanning 748.000 MHz PLC
Scanning 749.000 MHz PLC
Scanning 750.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 751.000 MHz PLC
Scanning 752.000 MHz PLC
Scanning 753.000 MHz PLC
Scanning 754.000 MHz PLC
Scanning 755.000 MHz PLC
Scanning 756.000 MHz PLC
Scanning 757.000 MHz PLC
Scanning 758.000 MHz PLC
Scanning 759.000 MHz PLC
Scanning 760.000 MHz PLC
Scanning 761.000 MHz PLC
Scanning 762.000 MHz PLC
Scanning 763.000 MHz PLC
Scanning 764.000 MHz PLC
Scanning 765.000 MHz PLC
Scanning 766.000 MHz PLC
Scanning 767.000 MHz PLC
Scanning 768.000 MHz PLC
Scanning 769.000 MHz PLC
Scanning 770.000 MHz PLC
Scanning 771.000 MHz PLC
Scanning 772.000 MHz PLC
Scanning 773.000 MHz PLC
Scanning 774.000 MHz PLC
Scanning 775.000 MHz PLC
Scanning 776.000 MHz PLC
Scanning 777.000 MHz PLC
Scanning 778.000 MHz PLC
Scanning 779.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 780.000 MHz PLC
Scanning 781.000 MHz PLC
Scanning 782.000 MHz PLC
Scanning 783.000 MHz PLC
Scanning 784.000 MHz PLC
Scanning 785.000 MHz PLC
Scanning 786.000 MHz PLC
Scanning 787.000 MHz PLC
Scanning 788.000 MHz PLC
Scanning 789.000 MHz PLC
Scanning 790.000 MHz PLC
Scanning 791.000 MHz PLC
Scanning 792.000 MHz PLC
Scanning 793.000 MHz PLC
Scanning 794.000 MHz PLC
Scanning 795.000 MHz PLC
Scanning 796.000 MHz PLC
Scanning 797.000 MHz PLC
Scanning 798.000 MHz PLC
Scanning 799.000 MHz PLC
Scanning 800.000 MHz PLC
Scanning 801.000 MHz PLC
Scanning 802.000 MHz PLC
Scanning 803.000 MHz PLC
Scanning 804.000 MHz PLC
Scanning 805.000 MHz PLC
Scanning 806.000 MHz PLC
Scanning 807.000 MHz PLC
Scanning 808.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 809.000 MHz PLC
Scanning 810.000 MHz PLC
Scanning 811.000 MHz PLC
Scanning 812.000 MHz PLC
Scanning 813.000 MHz PLC
Scanning 814.000 MHz PLC
Scanning 815.000 MHz PLC
Scanning 816.000 MHz PLC
Scanning 817.000 MHz PLC
Scanning 818.000 MHz PLC
Scanning 819.000 MHz PLC
Scanning 820.000 MHz PLC
Scanning 821.000 MHz PLC
Scanning 822.000 MHz PLC
Scanning 823.000 MHz PLC
Scanning 824.000 MHz PLC
Scanning 825.000 MHz PLC
Scanning 826.000 MHz PLC
Scanning 827.000 MHz PLC
Scanning 828.000 MHz PLC
Scanning 829.000 MHz PLC
Scanning 830.000 MHz PLC
Scanning 831.000 MHz PLC
Scanning 832.000 MHz PLC
Scanning 833.000 MHz PLC
Scanning 834.000 MHz PLC
Scanning 835.000 MHz PLC
Scanning 836.000 MHz PLC
Scanning 837.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 838.000 MHz PLC
Scanning 839.000 MHz PLC
Scanning 840.000 MHz PLC
Scanning 841.000 MHz PLC
Scanning 842.000 MHz PLC
Scanning 843.000 MHz PLC
Scanning 844.000 MHz PLC
Scanning 845.000 MHz PLC
Scanning 846.000 MHz PLC
Scanning 847.000 MHz PLC
Scanning 848.000 MHz PLC
Scanning 849.000 MHz PLC
Scanning 850.000 MHz PLC
Scanning 851.000 MHz PLC
Scanning 852.000 MHz PLC
Scanning 853.000 MHz PLC
Scanning 854.000 MHz PLC
Scanning 855.000 MHz PLC
Scanning 856.000 MHz PLC
Scanning 857.000 MHz PLC
Scanning 858.000 MHz PLC
Scanning 859.000 MHz PLC
Scanning 860.000 MHz PLC
Scanning 861.000 MHz PLC
Scanning 862.000 MHz PLC
Scanning 863.000 MHz PLC
Scanning 864.000 MHz PLC
Scanning 865.000 MHz PLC
Scanning 866.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 867.000 MHz PLC
Scanning 868.000 MHz PLC
Scanning 869.000 MHz PLC
Scanning 870.000 MHz PLC
Scanning 871.000 MHz PLC
Scanning 872.000 MHz PLC
Scanning 873.000 MHz PLC
Scanning 874.000 MHz PLC
Scanning 875.000 MHz PLC
Scanning 876.000 MHz PLC
Scanning 877.000 MHz PLC
Scanning 878.000 MHz PLC
Scanning 879.000 MHz PLC
Scanning 880.000 MHz PLC
Scanning 881.000 MHz PLC
Scanning 882.000 MHz PLC
Scanning 883.000 MHz PLC
Scanning 884.000 MHz PLC
Scanning 885.000 MHz PLC
Scanning 886.000 MHz PLC
Scanning 887.000 MHz PLC
Scanning 888.000 MHz PLC
Scanning 889.000 MHz PLC
Scanning 890.000 MHz PLC
Scanning 891.000 MHz PLC
Scanning 892.000 MHz PLC
Scanning 893.000 MHz PLC
Scanning 894.000 MHz PLC
Scanning 895.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 896.000 MHz PLC
Scanning 897.000 MHz PLC locked PLC
[00:05:00 01/01/1970] [CmDocsisCtlThread] BcmCmDsChanOfdm::DsLockOk:
(BcmCmDsChanOfdm) hwRxId=32 freq=0 dcid=0 PLC found
[00:05:00 01/01/1970] [CmDocsisCtlThread] BcmCmDsChanOfdm::StartOcdDpdGathering:
(BcmCmDsChanOfdm) starting OCD/DPD gathering on PLC
OCD/DPD Filtering being configured for hwRxId=32 on FilCh=0[PLC=0/ProfA=1] ->
filter enable = 0. TimeMs=0
[00:05:00 01/01/1970] [CmDocsisCtlThread] BcmCmDsChanOfdm::OcdSetsRx:
(BcmCmDsChanOfdm) hwRxId=32 dcid=0
[00:05:00 01/01/1970] [CmDocsisCtlThread] BcmCmDsChanOfdm::DpdSetsRx:
(BcmCmDsChanOfdm) Received DPD on hwRxId=32 dcid=0 for assigned Profile NCP
[00:05:00 01/01/1970] [CmDocsisCtlThread] BcmCmDsChanOfdm::DpdSetsRx:
(BcmCmDsChanOfdm) Received DPD on hwRxId=32 dcid=0 for assigned Profile A
[00:05:00 01/01/1970] [CmDocsisCtlThread]
BcmCmDsChanOfdm::DetectOcdDpdGatheringPlcDone: (BcmCmDsChanOfdm) hwRxId=32 dcid=0
OCD/DPD gathered via PLC. install OCD settings.
OCD/DPD Filtering being configured for hwRxId=32 on FilCh=0[PLC=0/ProfA=1] ->
filter enable = 1. TimeMs=234
[00:05:00 01/01/1970] [CmDocsisCtlThread] BcmCmDsChanOfdm::OcdInstallOk:
(BcmCmDsChanOfdm) hwRxId=32 dcid=159 OCD installed.
[00:05:01 01/01/1970] [CmDocsisCtlThread] BcmCmDsOfdmProfileState::InstallDpdSets:
HwRxId=32: installing DPD for profile NCP
CM/DocsisCtl> [00:05:02 01/01/1970] [CmDocsisCtlThread]
BcmCmDsOfdmProfileState::InstallDpdSets: HwRxId=32: installing DPD for profile A
Ofdm0: profile0 LOCK in 2 ms!
[00:05:02 01/01/1970] [CmDocsisCtlThread] BcmCmDsOfdmProfileState::FecLockOk:
hwRxId=32 dcid=159 profId=255 (NCP)
CM/DocsisCtl> [00:05:03 01/01/1970] [CmDocsisCtlThread]
BcmCmDsOfdmProfileState::FecLockOk: hwRxId=32 dcid=159 profId=0 (A)
[00:05:03 01/01/1970] [CmDocsisCtlThread]
BcmCmMacDomainSetsState::StartDsMacMddInit:
**********************************************
Waiting for MDDs...
**********************************************

CM/DocsisCtl> [00:05:09 01/01/1970] [CmDocsisCtlThread]


BcmCmMacDomainSetsState::TmNoMddEvent:
MDD timeout during kGatherInitialPriDsMddSets

BcmCmDocsisCtlMsgACT::HandleEvent() @time=309040 event_code=10


(kCmPriDsMddSetsNotRx)

***************************************************************

No MDD timeout ==> If no MDDs are detected on the candidate


Primary Downstream Channel, then the CM MUST abort the attempt
to utilize the current downstream channel

***************************************************************

[00:05:09 01/01/1970] [CmDocsisCtlThread]


BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) Purging DS
frequency 897000000 from current scan pass due to pre-registration restart error
[00:05:09 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) reinit MAC #3:
NoMddTimeout

[00:05:09 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::Reset:


(CmDocsisCtlThread) DefaultSnmpAgentClass::RestartPendingEvent for Vendor CM
Agent w/ BRCM Factory Support
Logging event: Lost MDD Timeout;CM-MAC=fc:4a:e9:de:ad:88;CMTS-
MAC=00:00:00:00:00:00;CM-QOS=1.1;CM-VER=3.1;
Vendor CM Agent w/ BRCM Factory Support updating ifTableLastChange.
Vendor CM Agent w/ BRCM Factory Support resetting to default state.
Vendor CM Agent w/ BRCM Factory Support destroying users...
Vendor CM Agent w/ BRCM Factory Support destroying notifies...
Vendor CM Agent w/ BRCM Factory Support destroying views...
Allowing DOCS-CABLE-DEVICE-MIB IP filters.
Vendor CM Agent w/ BRCM Factory Support deferring traps.
Received RG Event 0x80000001 State 0x1
eRouter Linux WAN Down
[00:05:09 01/01/1970] [eRouterMsgPipe] eRouterMsgPipe::UpdateIpNetToMediaEntry:
(eRouterMsgPipe) eRouter IP address:0.0.0.0
00:05:09.320 01/01/1970 (CALC) mtaCmStatusInfo() - MTA is Signaled: *NOT-
OPERATIONAL* (Stat=0x1) emtaCurState = 0.
EmtaSnmpAgent::SoftReset
Pausing trap thread
emta factory agentResetting to default state.
emta factory agent destroying users...
emta factory agent destroying notifies...
emta factory agent destroying views...
emta factory agent entering RFC-2576 Coexistence security mode.
emta factory agent entering Basic/Hybrid flow provisioning mode.
Resuming trap thread
Stopping DHCP/ToD/TFTP (client requested)...
[00:05:09 01/01/1970] [CmDocsisIpThread] BcmEcosIpHalIf::RemoveIpv6Address: (IP
Stack1 HalIf) ERROR - Failed to remove IPv6 address fe80::fe4a:e9ff:fede:ad88/64
from the stack!
[00:05:09 01/01/1970] [CmDocsisIpThread] BcmDhcpV6ClientIf::ReleaseAddresses:
(DHCPv6 ClientIf for IP Stack1) ERROR - IA state is initial; there is no address to
release.
BcmDocsis3DsMacEnableMulticastDsidForwarding 0; primary DS = 0
SCQAM DSID filter control = 0x00
OFDM DSID filter control = 0x01
Deleting DOCSIS 1.0 CoS Settings for SID 0
[00:05:09 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows:
(DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along
with associated Classifiers and PHS rules...
[00:05:09 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState:
(CmDocsisCtlThread)
[00:05:09 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Primary SID for usHwChannel 0 to 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 1
Updating US chan 8 data Profile test msg for Sid: 0x0.
Updating US chan 9 data Profile test msg for Sid: 0x0.
CM/DocsisCtl> BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=false
[00:05:10 01/01/1970] [CmDocsisCtlThread] BcmCmMultiDsHelper::PreRegDsChanChange:
target freq hz = 0
reason string = ErrorRecovery
CmInitReason = 16

Starting DS scanning...
[00:05:10 01/01/1970] [CmDocsisCtlThread] BcmCmDownstreamScan::StartScan: Starting
DS scan
Scanning 898.000 MHz PLC
Scanning 899.000 MHz PLC
Scanning 900.000 MHz PLC
CM/DocsisCtl> Scanning 901.000 MHz PLC
Scanning 902.000 MHz PLC
Scanning 903.000 MHz PLC
Scanning 904.000 MHz PLC
Scanning 905.000 MHz PLC
Scanning 906.000 MHz PLC
Scanning 907.000 MHz PLC
Scanning 908.000 MHz PLC
Scanning 909.000 MHz PLC
Scanning 910.000 MHz PLC
Scanning 911.000 MHz PLC
Scanning 912.000 MHz PLC
Scanning 913.000 MHz PLC
Scanning 914.000 MHz PLC
Scanning 915.000 MHz PLC
Scanning 916.000 MHz PLC
Scanning 917.000 MHz PLC
Scanning 918.000 MHz PLC
Scanning 919.000 MHz PLC
Scanning 920.000 MHz PLC
Scanning 921.000 MHz PLC
Scanning 922.000 MHz PLC
Scanning 923.000 MHz PLC
Scanning 924.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 925.000 MHz PLC
Scanning 926.000 MHz PLC
Scanning 927.000 MHz PLC
Scanning 928.000 MHz PLC
Scanning 929.000 MHz PLC
Scanning 930.000 MHz PLC
Scanning 931.000 MHz PLC
Scanning 932.000 MHz PLC
Scanning 933.000 MHz PLC
Scanning 934.000 MHz PLC
Scanning 935.000 MHz PLC
Scanning 936.000 MHz PLC
Scanning 937.000 MHz PLC
Scanning 938.000 MHz PLC
Scanning 939.000 MHz PLC
Scanning 940.000 MHz PLC
Scanning 941.000 MHz PLC
Scanning 942.000 MHz PLC
Scanning 943.000 MHz PLC
Scanning 944.000 MHz PLC
Scanning 945.000 MHz PLC
Scanning 946.000 MHz PLC
Scanning 947.000 MHz PLC
Scanning 948.000 MHz PLC
Scanning 949.000 MHz PLC
Scanning 950.000 MHz PLC
Scanning 951.000 MHz PLC
Scanning 952.000 MHz PLC
Scanning 953.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 954.000 MHz PLC
Scanning 955.000 MHz PLC
Scanning 956.000 MHz PLC
Scanning 957.000 MHz PLC
Scanning 958.000 MHz PLC
Scanning 959.000 MHz PLC
Scanning 960.000 MHz PLC
Scanning 961.000 MHz PLC
Scanning 962.000 MHz PLC
Scanning 963.000 MHz PLC
Scanning 964.000 MHz PLC
Scanning 965.000 MHz PLC
Scanning 966.000 MHz PLC
Scanning 967.000 MHz PLC
Scanning 968.000 MHz PLC
Scanning 969.000 MHz PLC
Scanning 970.000 MHz PLC
Scanning 971.000 MHz PLC
Scanning 972.000 MHz PLC
Scanning 973.000 MHz PLC
Scanning 974.000 MHz PLC
Scanning 975.000 MHz PLC
Scanning 976.000 MHz PLC
Scanning 977.000 MHz PLC
Scanning 978.000 MHz PLC
Scanning 979.000 MHz PLC
Scanning 980.000 MHz PLC
Scanning 981.000 MHz PLC
Scanning 982.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 983.000 MHz PLC
Scanning 984.000 MHz PLC
Scanning 985.000 MHz PLC
Scanning 986.000 MHz PLC
Scanning 987.000 MHz PLC
Scanning 988.000 MHz PLC
Scanning 989.000 MHz PLC
Scanning 990.000 MHz PLC
Scanning 991.000 MHz PLC
Scanning 992.000 MHz PLC
Scanning 993.000 MHz PLC
Scanning 994.000 MHz PLC
Scanning 995.000 MHz PLC
Scanning 996.000 MHz PLC
Scanning 997.000 MHz PLC
Scanning 998.000 MHz PLC
Scanning 999.000 MHz PLC
Scanning 1000.000 MHz PLC
Scanning 1001.000 MHz PLC
Scanning 1002.000 MHz PLC
Scanning 1003.000 MHz PLC
Scanning 1004.000 MHz PLC
Scanning 1005.000 MHz PLC
Scanning 1006.000 MHz PLC
Scanning 1007.000 MHz PLC
Scanning 1008.000 MHz PLC
Scanning 1009.000 MHz PLC
Scanning 1010.000 MHz PLC
Scanning 1011.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 1012.000 MHz PLC
Scanning 1013.000 MHz PLC
Scanning 1014.000 MHz PLC
Scanning 1015.000 MHz PLC
Scanning 1016.000 MHz PLC
Scanning 1017.000 MHz PLC
Scanning 1018.000 MHz PLC
Scanning 1019.000 MHz PLC
Scanning 1020.000 MHz PLC
Scanning 1021.000 MHz PLC
Scanning 1022.000 MHz PLC
Scanning 1023.000 MHz PLC
Scanning 1024.000 MHz PLC
Scanning 1025.000 MHz PLC
Scanning 1026.000 MHz PLC
Scanning 1027.000 MHz PLC
Scanning 1028.000 MHz PLC
Scanning 1029.000 MHz PLC
Scanning 1030.000 MHz PLC
Scanning 1031.000 MHz PLC
Scanning 1032.000 MHz PLC
Scanning 1033.000 MHz PLC
Scanning 1034.000 MHz PLC
Scanning 1035.000 MHz PLC
Scanning 1036.000 MHz PLC
Scanning 1037.000 MHz PLC
Scanning 1038.000 MHz PLC
Scanning 1039.000 MHz PLC
Scanning 1040.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 1041.000 MHz PLC
Scanning 1042.000 MHz PLC
Scanning 1043.000 MHz PLC
Scanning 1044.000 MHz PLC
Scanning 1045.000 MHz PLC
Scanning 1046.000 MHz PLC
Scanning 1047.000 MHz PLC
Scanning 1048.000 MHz PLC
Scanning 1049.000 MHz PLC
Scanning 1050.000 MHz PLC
Scanning 1051.000 MHz PLC
Scanning 1052.000 MHz PLC
Scanning 1053.000 MHz PLC
Scanning 1054.000 MHz PLC
Scanning 1055.000 MHz PLC
Scanning 1056.000 MHz PLC
Scanning 1057.000 MHz PLC
Scanning 1058.000 MHz PLC
Scanning 1059.000 MHz PLC
Scanning 1060.000 MHz PLC
Scanning 1061.000 MHz PLC
Scanning 1062.000 MHz PLC
Scanning 1063.000 MHz PLC
Scanning 1064.000 MHz PLC
Scanning 1065.000 MHz PLC
Scanning 1066.000 MHz PLC
Scanning 1067.000 MHz PLC
Scanning 1068.000 MHz PLC
Scanning 1069.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 1070.000 MHz PLC
Scanning 1071.000 MHz PLC
Scanning 1072.000 MHz PLC
Scanning 1073.000 MHz PLC
Scanning 1074.000 MHz PLC
Scanning 1075.000 MHz PLC
Scanning 1076.000 MHz PLC
Scanning 1077.000 MHz PLC
Scanning 1078.000 MHz PLC
Scanning 1079.000 MHz PLC
Scanning 1080.000 MHz PLC
Scanning 1081.000 MHz PLC
Scanning 1082.000 MHz PLC
Scanning 1083.000 MHz PLC
Scanning 1084.000 MHz PLC
Scanning 1085.000 MHz PLC
Scanning 1086.000 MHz PLC
Scanning 1087.000 MHz PLC
Scanning 1088.000 MHz PLC
Scanning 1089.000 MHz PLC
Scanning 1090.000 MHz PLC
Scanning 1091.000 MHz PLC
Scanning 1092.000 MHz PLC
Scanning 1093.000 MHz PLC
Scanning 1094.000 MHz PLC
Scanning 1095.000 MHz PLC
Scanning 1096.000 MHz PLC
Scanning 1097.000 MHz PLC
Scanning 1098.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 1099.000 MHz PLC
Scanning 1100.000 MHz PLC
Scanning 1101.000 MHz PLC
Scanning 1102.000 MHz PLC
Scanning 1103.000 MHz PLC
Scanning 1104.000 MHz PLC
Scanning 1105.000 MHz PLC
Scanning 1106.000 MHz PLC
Scanning 1107.000 MHz PLC
Scanning 1108.000 MHz PLC
Scanning 1109.000 MHz PLC
Scanning 1110.000 MHz PLC
Scanning 1111.000 MHz PLC
Scanning 1112.000 MHz PLC
Scanning 1113.000 MHz PLC
Scanning 1114.000 MHz PLC
Scanning 1115.000 MHz PLC
Scanning 1116.000 MHz PLC
Scanning 1117.000 MHz PLC
Scanning 1118.000 MHz PLC
Scanning 1119.000 MHz PLC
Scanning 1120.000 MHz PLC
Scanning 1121.000 MHz PLC
Scanning 1122.000 MHz PLC
Scanning 1123.000 MHz PLC
Scanning 1124.000 MHz PLC
Scanning 1125.000 MHz PLC
Scanning 1126.000 MHz PLC
Scanning 1127.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 1128.000 MHz PLC
Scanning 1129.000 MHz PLC
Scanning 1130.000 MHz PLC
Scanning 1131.000 MHz PLC
Scanning 1132.000 MHz PLC
Scanning 1133.000 MHz PLC
Scanning 1134.000 MHz PLC
Scanning 1135.000 MHz PLC
Scanning 1136.000 MHz PLC
Scanning 1137.000 MHz PLC
Scanning 1138.000 MHz PLC
Scanning 1139.000 MHz PLC
Scanning 1140.000 MHz PLC
Scanning 1141.000 MHz PLC
Scanning 1142.000 MHz PLC
Scanning 1143.000 MHz PLC
Scanning 1144.000 MHz PLC
Scanning 1145.000 MHz PLC
Scanning 1146.000 MHz PLC
Scanning 1147.000 MHz PLC
Scanning 1148.000 MHz PLC
Scanning 1149.000 MHz PLC
Scanning 1150.000 MHz PLC
Scanning 1151.000 MHz PLC
Scanning 1152.000 MHz PLC
Scanning 1153.000 MHz PLC
Scanning 1154.000 MHz PLC
Scanning 1155.000 MHz PLC
Scanning 1156.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 1157.000 MHz PLC
Scanning 1158.000 MHz PLC
Scanning 1159.000 MHz PLC
Scanning 1160.000 MHz PLC
Scanning 1161.000 MHz PLC
Scanning 1162.000 MHz PLC
Scanning 1163.000 MHz PLC
Scanning 1164.000 MHz PLC
Scanning 1165.000 MHz PLC
Scanning 1166.000 MHz PLC
Scanning 1167.000 MHz PLC
Scanning 1168.000 MHz PLC
Scanning 1169.000 MHz PLC
Scanning 1170.000 MHz PLC
Scanning 1171.000 MHz PLC
Scanning 1172.000 MHz PLC
Scanning 1173.000 MHz PLC
Scanning 1174.000 MHz PLC
Scanning 1175.000 MHz PLC
Scanning 1176.000 MHz PLC
Scanning 1177.000 MHz PLC
Scanning 1178.000 MHz PLC
Scanning 1179.000 MHz PLC
Scanning 1180.000 MHz PLC
Scanning 1181.000 MHz PLC
Scanning 1182.000 MHz PLC
Scanning 1183.000 MHz PLC
Scanning 1184.000 MHz PLC
Scanning 1185.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 1186.000 MHz PLC
Scanning 1187.000 MHz PLC
Scanning 1188.000 MHz PLC
Scanning 1189.000 MHz PLC
Scanning 1190.000 MHz PLC
Scanning 1191.000 MHz PLC
Scanning 1192.000 MHz PLC
Scanning 1193.000 MHz PLC
Scanning 1194.000 MHz PLC
Scanning 1195.000 MHz PLC
Scanning 1196.000 MHz PLC
Scanning 1197.000 MHz PLC
Scanning 1198.000 MHz PLC
Scanning 1199.000 MHz PLC
Scanning 1200.000 MHz PLC
Scanning 1201.000 MHz PLC
Scanning 1202.000 MHz PLC
Scanning 1203.000 MHz PLC
Scanning 1204.000 MHz PLC
Scanning 1205.000 MHz PLC
Scanning 1206.000 MHz PLC
Scanning 1207.000 MHz PLC
Scanning 1208.000 MHz PLC
Scanning 1209.000 MHz PLC
Scanning 1210.000 MHz PLC
Scanning 1211.000 MHz PLC
Scanning 1212.000 MHz PLC
Scanning 1213.000 MHz PLC
Scanning 1214.000 MHz PLC
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 1215.000 MHz PLC
Scanning 1216.000 MHz PLC
Scanning 1217.000 MHz PLC
Scanning 1218.000 MHz PLC
Scanning 999.000 MHz SC-QAM (Annex B(STD))
Scanning 993.000 MHz SC-QAM (Annex B(STD))
Scanning 987.000 MHz SC-QAM (Annex B(STD))
Scanning 981.000 MHz SC-QAM (Annex B(STD))
Scanning 975.000 MHz SC-QAM (Annex B(STD))
Scanning 969.000 MHz SC-QAM (Annex B(STD))
Scanning 963.000 MHz SC-QAM (Annex B(STD))
Scanning 957.000 MHz SC-QAM (Annex B(STD))
Scanning 951.000 MHz SC-QAM (Annex B(STD))
Scanning 945.000 MHz SC-QAM (Annex B(STD))
Scanning 939.000 MHz SC-QAM (Annex B(STD))
Scanning 933.000 MHz SC-QAM (Annex B(STD))
Scanning 927.000 MHz SC-QAM (Annex B(STD))
Scanning 921.000 MHz SC-QAM (Annex B(STD))
Scanning 915.000 MHz SC-QAM (Annex B(STD))
Scanning 909.000 MHz SC-QAM (Annex B(STD))
Scanning 903.000 MHz SC-QAM (Annex B(STD))
Scanning 897.000 MHz purged (Annex B(STD))
Scanning 891.000 MHz SC-QAM (Annex B(STD))
Scanning 885.000 MHz SC-QAM (Annex B(STD))
Scanning 879.000 MHz SC-QAM (Annex B(STD))
Scanning 873.000 MHz SC-QAM (Annex B(STD))
Scanning 867.000 MHz SC-QAM (Annex B(STD))
Scanning 861.000 MHz SC-QAM (Annex B(STD))
Scanning 855.000 MHz SC-QAM (Annex B(STD))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 849.000 MHz SC-QAM (Annex B(STD))
Scanning 843.000 MHz SC-QAM (Annex B(STD))
Scanning 837.000 MHz SC-QAM (Annex B(STD))
Scanning 831.000 MHz SC-QAM (Annex B(STD))
Scanning 825.000 MHz SC-QAM (Annex B(STD))
Scanning 819.000 MHz SC-QAM (Annex B(STD))
Scanning 813.000 MHz SC-QAM (Annex B(STD))
Scanning 807.000 MHz SC-QAM (Annex B(STD))
Scanning 801.000 MHz SC-QAM (Annex B(STD))
Scanning 795.000 MHz SC-QAM (Annex B(STD))
Scanning 789.000 MHz SC-QAM (Annex B(STD))
Scanning 783.000 MHz SC-QAM (Annex B(STD))
Scanning 777.000 MHz SC-QAM (Annex B(STD))
Scanning 771.000 MHz SC-QAM (Annex B(STD))
Scanning 765.000 MHz SC-QAM (Annex B(STD))
Scanning 759.000 MHz SC-QAM (Annex B(STD))
Scanning 753.000 MHz SC-QAM (Annex B(STD))
Scanning 747.000 MHz SC-QAM (Annex B(STD))
Scanning 741.000 MHz SC-QAM (Annex B(STD))
Scanning 735.000 MHz SC-QAM (Annex B(STD))
Scanning 729.000 MHz SC-QAM (Annex B(STD))
Scanning 723.000 MHz SC-QAM (Annex B(STD))
Scanning 717.000 MHz SC-QAM (Annex B(STD))
Scanning 711.000 MHz SC-QAM (Annex B(STD))
Scanning 705.000 MHz SC-QAM (Annex B(STD))
Scanning 699.000 MHz SC-QAM (Annex B(STD))
Scanning 693.000 MHz SC-QAM (Annex B(STD))
Scanning 687.000 MHz SC-QAM (Annex B(STD))
Scanning 681.000 MHz SC-QAM (Annex B(STD))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 675.000 MHz SC-QAM (Annex B(STD))
Scanning 669.000 MHz SC-QAM (Annex B(STD))
Scanning 663.000 MHz SC-QAM (Annex B(STD))
Scanning 657.000 MHz SC-QAM (Annex B(STD))
Scanning 651.000 MHz SC-QAM (Annex B(STD))
Scanning 645.000 MHz SC-QAM (Annex B(STD))
Scanning 639.000 MHz SC-QAM (Annex B(STD))
Scanning 633.000 MHz SC-QAM (Annex B(STD))
Scanning 627.000 MHz SC-QAM (Annex B(STD))
Scanning 621.000 MHz SC-QAM (Annex B(STD))
Scanning 615.000 MHz SC-QAM (Annex B(STD))
Scanning 609.000 MHz SC-QAM (Annex B(STD))
Scanning 603.000 MHz SC-QAM (Annex B(STD))
Scanning 597.000 MHz SC-QAM (Annex B(STD))
Scanning 591.000 MHz SC-QAM (Annex B(STD))
Scanning 585.000 MHz SC-QAM (Annex B(STD))
Scanning 579.000 MHz SC-QAM (Annex B(STD))
Scanning 573.000 MHz SC-QAM (Annex B(STD))
Scanning 567.000 MHz SC-QAM (Annex B(STD))
Scanning 561.000 MHz SC-QAM (Annex B(STD))
Scanning 555.000 MHz SC-QAM (Annex B(STD))
Scanning 549.000 MHz SC-QAM (Annex B(STD))
Scanning 543.000 MHz SC-QAM (Annex B(STD))
Scanning 537.000 MHz SC-QAM (Annex B(STD))
Scanning 531.000 MHz purged (Annex B(STD))
Scanning 525.000 MHz SC-QAM (Annex B(STD))
Scanning 519.000 MHz SC-QAM (Annex B(STD))
Scanning 513.000 MHz SC-QAM (Annex B(STD))
Scanning 507.000 MHz SC-QAM (Annex B(STD))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 501.000 MHz SC-QAM (Annex B(STD))
Scanning 495.000 MHz SC-QAM (Annex B(STD))
Scanning 489.000 MHz SC-QAM (Annex B(STD))
Scanning 483.000 MHz SC-QAM (Annex B(STD))
Scanning 477.000 MHz SC-QAM (Annex B(STD))
Scanning 471.000 MHz SC-QAM (Annex B(STD))
Scanning 465.000 MHz SC-QAM (Annex B(STD))
Scanning 459.000 MHz SC-QAM (Annex B(STD))
Scanning 453.000 MHz SC-QAM (Annex B(STD))
Scanning 447.000 MHz SC-QAM (Annex B(STD))
Scanning 441.000 MHz SC-QAM (Annex B(STD))
Scanning 435.000 MHz SC-QAM (Annex B(STD))
Scanning 429.000 MHz SC-QAM (Annex B(STD))
Scanning 423.000 MHz SC-QAM (Annex B(STD))
Scanning 417.000 MHz SC-QAM (Annex B(STD))
Scanning 411.000 MHz SC-QAM (Annex B(STD))
Scanning 405.000 MHz SC-QAM (Annex B(STD))
Scanning 399.000 MHz SC-QAM (Annex B(STD))
Scanning 393.000 MHz SC-QAM (Annex B(STD))
Scanning 387.000 MHz SC-QAM (Annex B(STD))
Scanning 381.000 MHz SC-QAM (Annex B(STD))
Scanning 375.000 MHz SC-QAM (Annex B(STD))
Scanning 369.000 MHz SC-QAM (Annex B(STD))
Scanning 363.000 MHz SC-QAM (Annex B(STD))
Scanning 357.000 MHz SC-QAM (Annex B(STD))
Scanning 351.000 MHz SC-QAM (Annex B(STD))
Scanning 345.000 MHz SC-QAM (Annex B(STD))
Scanning 339.000 MHz SC-QAM (Annex B(STD))
Scanning 333.000 MHz SC-QAM (Annex B(STD))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 327.000 MHz SC-QAM (Annex B(STD))
Scanning 321.000 MHz SC-QAM (Annex B(STD))
Scanning 315.000 MHz SC-QAM (Annex B(STD))
Scanning 309.000 MHz SC-QAM (Annex B(STD))
Scanning 303.000 MHz SC-QAM (Annex B(STD))
Scanning 297.000 MHz SC-QAM (Annex B(STD))
Scanning 291.000 MHz SC-QAM (Annex B(STD))
Scanning 285.000 MHz SC-QAM (Annex B(STD))
Scanning 279.000 MHz SC-QAM (Annex B(STD))
Scanning 273.000 MHz SC-QAM (Annex B(STD))
Scanning 267.000 MHz SC-QAM (Annex B(STD))
Scanning 261.000 MHz SC-QAM (Annex B(STD))
Scanning 997.750 MHz SC-QAM (Annex B(HRC))
Scanning 991.750 MHz SC-QAM (Annex B(HRC))
Scanning 985.750 MHz SC-QAM (Annex B(HRC))
Scanning 979.750 MHz SC-QAM (Annex B(HRC))
Scanning 973.750 MHz SC-QAM (Annex B(HRC))
Scanning 967.750 MHz SC-QAM (Annex B(HRC))
Scanning 961.750 MHz SC-QAM (Annex B(HRC))
Scanning 955.750 MHz SC-QAM (Annex B(HRC))
Scanning 949.750 MHz SC-QAM (Annex B(HRC))
Scanning 943.750 MHz SC-QAM (Annex B(HRC))
Scanning 937.750 MHz SC-QAM (Annex B(HRC))
Scanning 931.750 MHz SC-QAM (Annex B(HRC))
Scanning 925.750 MHz SC-QAM (Annex B(HRC))
Scanning 919.750 MHz SC-QAM (Annex B(HRC))
Scanning 913.750 MHz SC-QAM (Annex B(HRC))
Scanning 907.750 MHz SC-QAM (Annex B(HRC))
Scanning 901.750 MHz SC-QAM (Annex B(HRC))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 895.750 MHz SC-QAM (Annex B(HRC))
Scanning 889.750 MHz SC-QAM (Annex B(HRC))
Scanning 883.750 MHz SC-QAM (Annex B(HRC))
Scanning 877.750 MHz SC-QAM (Annex B(HRC))
Scanning 871.750 MHz SC-QAM (Annex B(HRC))
Scanning 865.750 MHz SC-QAM (Annex B(HRC))
Scanning 859.750 MHz SC-QAM (Annex B(HRC))
Scanning 853.750 MHz SC-QAM (Annex B(HRC))
Scanning 847.750 MHz SC-QAM (Annex B(HRC))
Scanning 841.750 MHz SC-QAM (Annex B(HRC))
Scanning 835.750 MHz SC-QAM (Annex B(HRC))
Scanning 829.750 MHz SC-QAM (Annex B(HRC))
Scanning 823.750 MHz SC-QAM (Annex B(HRC))
Scanning 817.750 MHz SC-QAM (Annex B(HRC))
Scanning 811.750 MHz SC-QAM (Annex B(HRC))
Scanning 805.750 MHz SC-QAM (Annex B(HRC))
Scanning 799.750 MHz SC-QAM (Annex B(HRC))
Scanning 793.750 MHz SC-QAM (Annex B(HRC))
Scanning 787.750 MHz SC-QAM (Annex B(HRC))
Scanning 781.750 MHz SC-QAM (Annex B(HRC))
Scanning 775.750 MHz SC-QAM (Annex B(HRC))
Scanning 769.750 MHz SC-QAM (Annex B(HRC))
Scanning 763.750 MHz SC-QAM (Annex B(HRC))
Scanning 757.750 MHz SC-QAM (Annex B(HRC))
Scanning 751.750 MHz SC-QAM (Annex B(HRC))
Scanning 745.750 MHz SC-QAM (Annex B(HRC))
Scanning 739.750 MHz SC-QAM (Annex B(HRC))
Scanning 733.750 MHz SC-QAM (Annex B(HRC))
Scanning 727.750 MHz SC-QAM (Annex B(HRC))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 721.750 MHz SC-QAM (Annex B(HRC))
Scanning 715.750 MHz SC-QAM (Annex B(HRC))
Scanning 709.750 MHz SC-QAM (Annex B(HRC))
Scanning 703.750 MHz SC-QAM (Annex B(HRC))
Scanning 697.750 MHz SC-QAM (Annex B(HRC))
Scanning 691.750 MHz SC-QAM (Annex B(HRC))
Scanning 685.750 MHz SC-QAM (Annex B(HRC))
Scanning 679.750 MHz SC-QAM (Annex B(HRC))
Scanning 673.750 MHz SC-QAM (Annex B(HRC))
Scanning 667.750 MHz SC-QAM (Annex B(HRC))
Scanning 661.750 MHz SC-QAM (Annex B(HRC))
Scanning 655.750 MHz SC-QAM (Annex B(HRC))
Scanning 649.750 MHz SC-QAM (Annex B(HRC))
Scanning 643.750 MHz SC-QAM (Annex B(HRC))
Scanning 637.750 MHz SC-QAM (Annex B(HRC))
Scanning 631.750 MHz SC-QAM (Annex B(HRC))
Scanning 625.750 MHz SC-QAM (Annex B(HRC))
Scanning 619.750 MHz SC-QAM (Annex B(HRC))
Scanning 613.750 MHz SC-QAM (Annex B(HRC))
Scanning 607.750 MHz SC-QAM (Annex B(HRC))
Scanning 601.750 MHz SC-QAM (Annex B(HRC))
Scanning 595.750 MHz SC-QAM (Annex B(HRC))
Scanning 589.750 MHz SC-QAM (Annex B(HRC))
Scanning 583.750 MHz SC-QAM (Annex B(HRC))
Scanning 577.750 MHz SC-QAM (Annex B(HRC))
Scanning 571.750 MHz SC-QAM (Annex B(HRC))
Scanning 565.750 MHz SC-QAM (Annex B(HRC))
Scanning 559.750 MHz SC-QAM (Annex B(HRC))
Scanning 553.750 MHz SC-QAM (Annex B(HRC))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 547.750 MHz SC-QAM (Annex B(HRC))
Scanning 541.750 MHz SC-QAM (Annex B(HRC))
Scanning 535.750 MHz SC-QAM (Annex B(HRC))
Scanning 529.750 MHz SC-QAM (Annex B(HRC))
Scanning 523.750 MHz SC-QAM (Annex B(HRC))
Scanning 517.750 MHz SC-QAM (Annex B(HRC))
Scanning 511.750 MHz SC-QAM (Annex B(HRC))
Scanning 505.750 MHz SC-QAM (Annex B(HRC))
Scanning 499.750 MHz SC-QAM (Annex B(HRC))
Scanning 493.750 MHz SC-QAM (Annex B(HRC))
Scanning 487.750 MHz SC-QAM (Annex B(HRC))
Scanning 481.750 MHz SC-QAM (Annex B(HRC))
Scanning 475.750 MHz SC-QAM (Annex B(HRC))
Scanning 469.750 MHz SC-QAM (Annex B(HRC))
Scanning 463.750 MHz SC-QAM (Annex B(HRC))
Scanning 457.750 MHz SC-QAM (Annex B(HRC))
Scanning 451.750 MHz SC-QAM (Annex B(HRC))
Scanning 445.750 MHz SC-QAM (Annex B(HRC))
Scanning 439.750 MHz SC-QAM (Annex B(HRC))
Scanning 433.750 MHz SC-QAM (Annex B(HRC))
Scanning 427.750 MHz SC-QAM (Annex B(HRC))
Scanning 421.750 MHz SC-QAM (Annex B(HRC))
Scanning 415.750 MHz SC-QAM (Annex B(HRC))
Scanning 409.750 MHz SC-QAM (Annex B(HRC))
Scanning 403.750 MHz SC-QAM (Annex B(HRC))
Scanning 397.750 MHz SC-QAM (Annex B(HRC))
Scanning 391.750 MHz SC-QAM (Annex B(HRC))
Scanning 385.750 MHz SC-QAM (Annex B(HRC))
Scanning 379.750 MHz SC-QAM (Annex B(HRC))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 373.750 MHz SC-QAM (Annex B(HRC))
Scanning 367.750 MHz SC-QAM (Annex B(HRC))
Scanning 361.750 MHz SC-QAM (Annex B(HRC))
Scanning 355.750 MHz SC-QAM (Annex B(HRC))
Scanning 349.750 MHz SC-QAM (Annex B(HRC))
Scanning 343.750 MHz SC-QAM (Annex B(HRC))
Scanning 337.750 MHz SC-QAM (Annex B(HRC))
Scanning 331.750 MHz SC-QAM (Annex B(HRC))
Scanning 325.750 MHz SC-QAM (Annex B(HRC))
Scanning 319.750 MHz SC-QAM (Annex B(HRC))
Scanning 313.750 MHz SC-QAM (Annex B(HRC))
Scanning 307.750 MHz SC-QAM (Annex B(HRC))
Scanning 301.750 MHz SC-QAM (Annex B(HRC))
Scanning 295.750 MHz SC-QAM (Annex B(HRC))
Scanning 289.750 MHz SC-QAM (Annex B(HRC))
Scanning 283.750 MHz SC-QAM (Annex B(HRC))
Scanning 277.750 MHz SC-QAM (Annex B(HRC))
Scanning 271.750 MHz SC-QAM (Annex B(HRC))
Scanning 265.750 MHz SC-QAM (Annex B(HRC))
Scanning 259.750 MHz SC-QAM (Annex B(HRC))
Scanning 400.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 408.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 416.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 424.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 432.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 440.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 448.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 456.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 464.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 472.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 480.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 488.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 496.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 504.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 512.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 520.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 528.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 536.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 544.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 552.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 560.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 568.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 576.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 584.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 592.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 600.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 608.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 616.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 624.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 632.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 640.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 648.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 656.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 664.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 672.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 680.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 688.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 696.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 704.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 712.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 720.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 728.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 736.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 744.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 752.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 760.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 768.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 776.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 784.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 792.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 800.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 808.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 816.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 824.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 832.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 840.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 848.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 856.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 864.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 872.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 880.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 888.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 896.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 904.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 912.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 920.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 928.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 936.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 944.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 952.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 960.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 968.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 976.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 984.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 992.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 392.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 384.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 376.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 368.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 360.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 352.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 344.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 336.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 328.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 320.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 312.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 304.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 296.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 288.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 280.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 272.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 264.000 MHz SC-QAM (Annex A(Eu.8M))
Scanning 258.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 259.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 260.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 261.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 262.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 263.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 264.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 265.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 266.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 267.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 268.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 269.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 270.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 271.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 272.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 273.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 274.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 275.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 276.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 277.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 278.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 279.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 280.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 281.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 282.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 283.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 284.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 285.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 286.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 287.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 288.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 289.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 290.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 291.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 292.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 293.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 294.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 295.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 296.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 297.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 298.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 299.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 300.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 301.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 302.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 303.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 304.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 305.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 306.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 307.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 308.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 309.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 310.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 311.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 312.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 313.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 314.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 315.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 316.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 317.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 318.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 319.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 320.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 321.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 322.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 323.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 324.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 325.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 326.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 327.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 328.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 329.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 330.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 331.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 332.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 333.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 334.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 335.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 336.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 337.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 338.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 339.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 340.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 341.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 342.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 343.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 344.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 345.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 346.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 347.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 348.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 349.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 350.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 351.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 352.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 353.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 354.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 355.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 356.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 357.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 358.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 359.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 360.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 361.000 MHz purged (Annex A(Eu.1M))
Scanning 362.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 363.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 364.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 365.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 366.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 367.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 368.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 369.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 370.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 371.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 372.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 373.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 374.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 375.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 376.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 377.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 378.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 379.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 380.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 381.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 382.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 383.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 384.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 385.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 386.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 387.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 388.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 389.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 390.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 391.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 392.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 393.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 394.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 395.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 396.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 397.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 398.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 399.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 400.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 401.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 402.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 403.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 404.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 405.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 406.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 407.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 408.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 409.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 410.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 411.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 412.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 413.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 414.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 415.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 416.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 417.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 418.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 419.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 420.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 421.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 422.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 423.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 424.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 425.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 426.000 MHz SC-QAM (Annex A(Eu.1M))
cScanning 427.000 MHz SC-QAM (Annex A(Eu.1M))
d Scanning 428.000 MHz SC-QAM (Annex A(Eu.1M))
/dScanning 429.000 MHz SC-QAM (Annex A(Eu.1M))
ocScanning 430.000 MHz SC-QAM (Annex A(Eu.1M))

Active Command Table: CM DOCSIS Control Thread Commands (docsis_ctl)

CM -> docsis_ctl

CM/DocsisCtl> scScanning 431.000 MHz SC-QAM (Annex A(Eu.1M))


CM/DocsisCtl> scan_stop

CM/DocsisCtl>
CM/DocsisCtl> Scanning 432.000 MHz SC-QAM (Annex A(Eu.1M))
Scan stopped...

CM/DocsisCtl>
CM/DocsisCtl>
CM/DocsisCtl>
CM/DocsisCtl> goto_ds 897

Moving to Downstream Frequency 897000000 Hz.


[00:07:58 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::Reset:
(CmDocsisCtlThread) DefaultSnmpAgentClass::RestartPendingEvent for Vendor CM
Agent w/ BRCM Factory Support
Vendor CM Agent w/ BRCM Factory Support updating ifTableLastChange.
Vendor CM Agent w/ BRCM Factory Support resetting to default state.
Vendor CM Agent w/ BRCM Factory Support destroying users...
Vendor CM Agent w/ BRCM Factory Support destroying notifies...
Vendor CM Agent w/ BRCM Factory Support destroying views...

CM/DocsisCtl> Allowing DOCS-CABLE-DEVICE-MIB IP filters.


Vendor CM Agent w/ BRCM Factory Support deferring traps.
Received RG Event 0x80000001 State 0x1
eRouter Linux WAN Down
[00:07:59 01/01/1970] [eRouterMsgPipe] eRouterMsgPipe::UpdateIpNetToMediaEntry:
(eRouterMsgPipe) eRouter IP address:0.0.0.0
00:07:59.110 01/01/1970 (CALC) mtaCmStatusInfo() - MTA is Signaled: *NOT-
OPERATIONAL* (Stat=0x1) emtaCurState = 0.
EmtaSnmpAgent::SoftReset
Pausing trap thread
emta factory agentResetting to default state.
emta factory agent destroying users...
emta factory agent destroying notifies...
emta factory agent destroying views...
emta factory agent entering RFC-2576 Coexistence security mode.
emta factory agent entering Basic/Hybrid flow provisioning mode.
Resuming trap thread
Stopping DHCP/ToD/TFTP (client requested)...
[00:07:59 01/01/1970] [CmDocsisIpThread] BcmEcosIpHalIf::RemoveIpv6Address: (IP
Stack1 HalIf) ERROR - Failed to remove IPv6 address fe80::fe4a:e9ff:fede:ad88/64
from the stack!
[00:07:59 01/01/1970] [CmDocsisIpThread] BcmDhcpV6ClientIf::ReleaseAddresses:
(DHCPv6 ClientIf for IP Stack1) ERROR - IA state is initial; there is no address to
release.
BcmDocsis3DsMacEnableMulticastDsidForwarding 0; primary DS = 0
SCQAM DSID filter control = 0x00
OFDM DSID filter control = 0x01
Deleting DOCSIS 1.0 CoS Settings for SID 0
[00:07:59 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows:
(DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along
with associated Classifiers and PHS rules...
[00:07:59 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState:
(CmDocsisCtlThread)
[00:07:59 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Primary SID for usHwChannel 0 to 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 1
Updating US chan 8 data Profile test msg for Sid: 0x0.
Updating US chan 9 data Profile test msg for Sid: 0x0.
CM/DocsisCtl> BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=false
[00:08:00 01/01/1970] [CmDocsisCtlThread] BcmCmMultiDsHelper::PreRegDsChanChange:
target freq hz = 897000000
reason string = ConsoleCmdOverride
CmInitReason = 16

Starting DS scanning at 897000000 Hz...


[00:08:00 01/01/1970] [CmDocsisCtlThread] BcmCmDownstreamScan::StartScan: Starting
DS scan
Scanning 897.000 MHz PLC/SC-QAM (ConsoleCmdOverride) locked PLC
[00:08:00 01/01/1970] [CmDocsisCtlThread] BcmCmDsChanOfdm::DsLockOk:
(BcmCmDsChanOfdm) hwRxId=32 freq=0 dcid=0 PLC found
[00:08:00 01/01/1970] [CmDocsisCtlThread] BcmCmDsChanOfdm::StartOcdDpdGathering:
(BcmCmDsChanOfdm) starting OCD/DPD gathering on PLC
OCD/DPD Filtering being configured for hwRxId=32 on FilCh=0[PLC=0/ProfA=1] ->
filter enable = 0. TimeMs=0
[00:08:00 01/01/1970] [CmDocsisCtlThread] BcmCmDsChanOfdm::OcdSetsRx:
(BcmCmDsChanOfdm) hwRxId=32 dcid=0
[00:08:00 01/01/1970] [CmDocsisCtlThread] BcmCmDsChanOfdm::DpdSetsRx:
(BcmCmDsChanOfdm) Received DPD on hwRxId=32 dcid=0 for assigned Profile NCP
[00:08:00 01/01/1970] [CmDocsisCtlThread] BcmCmDsChanOfdm::DpdSetsRx:
(BcmCmDsChanOfdm) Received DPD on hwRxId=32 dcid=0 for assigned Profile A
[00:08:00 01/01/1970] [CmDocsisCtlThread]
BcmCmDsChanOfdm::DetectOcdDpdGatheringPlcDone: (BcmCmDsChanOfdm) hwRxId=32 dcid=0
OCD/DPD gathered via PLC. install OCD settings.
OCD/DPD Filtering being configured for hwRxId=32 on FilCh=0[PLC=0/ProfA=1] ->
filter enable = 1. TimeMs=123
[00:08:00 01/01/1970] [CmDocsisCtlThread] BcmCmDsChanOfdm::OcdInstallOk:
(BcmCmDsChanOfdm) hwRxId=32 dcid=159 OCD installed.
[00:08:00 01/01/1970] [CmDocsisCtlThread] BcmCmDsOfdmProfileState::InstallDpdSets:
HwRxId=32: installing DPD for profile NCP
[00:08:01 01/01/1970] [CmDocsisCtlThread] BcmCmDsOfdmProfileState::InstallDpdSets:
HwRxId=32: installing DPD for profile A
Ofdm0: profile0 LOCK in 2 ms!
[00:08:01 01/01/1970] [CmDocsisCtlThread] BcmCmDsOfdmProfileState::FecLockOk:
hwRxId=32 dcid=159 profId=255 (NCP)
CM/DocsisCtl> [00:08:02 01/01/1970] [CmDocsisCtlThread]
BcmCmDsOfdmProfileState::FecLockOk: hwRxId=32 dcid=159 profId=0 (A)
[00:08:02 01/01/1970] [CmDocsisCtlThread]
BcmCmMacDomainSetsState::StartDsMacMddInit:
**********************************************
Waiting for MDDs...
**********************************************

CM/DocsisCtl> [00:08:08 01/01/1970] [CmDocsisCtlThread]


BcmCmMacDomainSetsState::TmNoMddEvent:
MDD timeout during kGatherInitialPriDsMddSets

BcmCmDocsisCtlMsgACT::HandleEvent() @time=488040 event_code=10


(kCmPriDsMddSetsNotRx)

***************************************************************

No MDD timeout ==> If no MDDs are detected on the candidate


Primary Downstream Channel, then the CM MUST abort the attempt
to utilize the current downstream channel

***************************************************************

[00:08:08 01/01/1970] [CmDocsisCtlThread]


BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) Purging DS
frequency 897000000 from current scan pass due to pre-registration restart error
[00:08:08 01/01/1970] [CmDocsisCtlThread]
BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) reinit MAC #5:
NoMddTimeout

[00:08:08 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::Reset:


(CmDocsisCtlThread) DefaultSnmpAgentClass::RestartPendingEvent for Vendor CM
Agent w/ BRCM Factory Support
Logging event: Lost MDD Timeout;CM-MAC=fc:4a:e9:de:ad:88;CMTS-
MAC=00:00:00:00:00:00;CM-QOS=1.1;CM-VER=3.1;
Vendor CM Agent w/ BRCM Factory Support updating ifTableLastChange.
Vendor CM Agent w/ BRCM Factory Support resetting to default state.
Vendor CM Agent w/ BRCM Factory Support destroying users...
Vendor CM Agent w/ BRCM Factory Support destroying notifies...
Vendor CM Agent w/ BRCM Factory Support destroying views...
Allowing DOCS-CABLE-DEVICE-MIB IP filters.
Vendor CM Agent w/ BRCM Factory Support deferring traps.
Received RG Event 0x80000001 State 0x1
eRouter Linux WAN Down
[00:08:08 01/01/1970] [eRouterMsgPipe] eRouterMsgPipe::UpdateIpNetToMediaEntry:
(eRouterMsgPipe) eRouter IP address:0.0.0.0
00:08:08.320 01/01/1970 (CALC) mtaCmStatusInfo() - MTA is Signaled: *NOT-
OPERATIONAL* (Stat=0x1) emtaCurState = 0.
EmtaSnmpAgent::SoftReset
Pausing trap thread
emta factory agentResetting to default state.
emta factory agent destroying users...
emta factory agent destroying notifies...
emta factory agent destroying views...
emta factory agent entering RFC-2576 Coexistence security mode.
emta factory agent entering Basic/Hybrid flow provisioning mode.
Resuming trap thread
Stopping DHCP/ToD/TFTP (client requested)...
[00:08:08 01/01/1970] [CmDocsisIpThread] BcmEcosIpHalIf::RemoveIpv6Address: (IP
Stack1 HalIf) ERROR - Failed to remove IPv6 address fe80::fe4a:e9ff:fede:ad88/64
from the stack!
[00:08:08 01/01/1970] [CmDocsisIpThread] BcmDhcpV6ClientIf::ReleaseAddresses:
(DHCPv6 ClientIf for IP Stack1) ERROR - IA state is initial; there is no address to
release.
BcmDocsis3DsMacEnableMulticastDsidForwarding 0; primary DS = 0
SCQAM DSID filter control = 0x00
OFDM DSID filter control = 0x01
Deleting DOCSIS 1.0 CoS Settings for SID 0
[00:08:08 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows:
(DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along
with associated Classifiers and PHS rules...
[00:08:08 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState:
(CmDocsisCtlThread)
[00:08:08 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Primary SID for usHwChannel 0 to 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 1
Updating US chan 8 data Profile test msg for Sid: 0x0.
Updating US chan 9 data Profile test msg for Sid: 0x0.
CM/DocsisCtl> BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=false
[00:08:09 01/01/1970] [CmDocsisCtlThread] BcmCmMultiDsHelper::PreRegDsChanChange:
target freq hz = 0
reason string = ErrorRecovery
CmInitReason = 16

Starting DS scanning...
[00:08:09 01/01/1970] [CmDocsisCtlThread] BcmCmDownstreamScan::StartScan: Starting
DS scan
CM/DocsisCtl> Scanning 433.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 434.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 435.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 436.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 437.000 MHz SC-QAM (Annex A(Eu.1M))
cdScanning 438.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 439.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 440.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 441.000 MHz SC-QAM (Annex A(Eu.1M))
/Scanning 442.000 MHz SC-QAM (Annex A(Eu.1M))
cScanning 443.000 MHz SC-QAM (Annex A(Eu.1M))
m

Active Command Table: CM DOCSIS HAL Commands (cm_hal)

CM -> cm_hal

CM/CmHal> Scanning 444.000 MHz SC-QAM (Annex A(Eu.1M))


Scanning 445.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 446.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 447.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 448.000 MHz SC-QAM (Annex A(Eu.1M))
dScanning 449.000 MHz SC-QAM (Annex A(Eu.1M))
iScanning 450.000 MHz SC-QAM (Annex A(Eu.1M))
pScanning 451.000 MHz SC-QAM (Annex A(Eu.1M))
CM/CmHal> diplexer_settings
SWITCHABLE diplexer settings
----------------------------
0: US:(5 MHz..85 MHz) DS:(108 MHz..1218 MHz)
1: US:(5 MHz..204 MHz) DS:(258 MHz..1218 MHz) (ACTIVE)

Diplexer driver settings


------------------------
Diplexer driver uses GPIO 34, STANDARD sense.
Current diplexer driver selection is HIGH

CM/CmHal> Scanning 452.000 MHz SC-QAM (Annex A(Eu.1M))


Scanning 453.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 454.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 455.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 456.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 457.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 458.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 459.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 460.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 461.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 462.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 463.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 464.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 465.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 466.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 467.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 468.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 469.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 470.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 471.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 472.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 473.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 474.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 475.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 476.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 477.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 478.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 479.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 480.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 481.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 482.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 483.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 484.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 485.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 486.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 487.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 488.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 489.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 490.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 491.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 492.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 493.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 494.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 495.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 496.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 497.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 498.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 499.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 500.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 501.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 502.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 503.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 504.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 505.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 506.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 507.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 508.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 509.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 510.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 511.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 512.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 513.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 514.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 515.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 516.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 517.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 518.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 519.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 520.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 521.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 522.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 688.000 MHz PLC/SC-QAM (Non-vol happy-home)
Scanning 523.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 524.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 525.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 526.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 527.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 528.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 529.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 530.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 531.000 MHz purged (Annex A(Eu.1M))
Scanning 532.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 533.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 534.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 535.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 536.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 537.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 538.000 MHz SC-QAM (Annex A(Eu.1M))
Scanning 539.000 MHz SC-QAM (Annex A(Eu.1M)) locked SC-QAM
[00:08:32 01/01/1970] [CmDocsisCtlThread] BcmCmDsChan::DsLockOk: (BcmCmDsChan 0)
hwRxId=0 freq=0 dcid=0

******************************************
DOWNSTREAM STATUS
******************************************
HW Channel ID = 0
Phy type: SC-QAM
DS active chan settings:
ds chan id = 0
center freq, Hz = 539000000 Hz
primary capable = false
status event rpt bitmask = 0

CM HW Detected DS Phy Settings:


Center Freq, Hz = 539000000
QAM = Locked
FEC = Locked
Carrier Freq Offset, kHz = 0
Channel Width, Hz = 8000000
Modulation = Qam256
Interleaver = Taps12Incr17
Symbol Rate, sym/sec = 6952000

******************************************

[00:08:32 01/01/1970] [CmDocsisCtlThread]


BcmCmMacDomainSetsState::StartDsMacMddInit:
**********************************************
Waiting for MDDs...
**********************************************

CM/CmHal>
BcmCmDocsisCtlMsgACT::HandleEvent() @time=513660 event_code=4 (kCmPriDsMddSetsOk)
MDD diplexer band edge not specified.
MDD Plant US Frequency Range = extended.
Requested Spectrum = US:(0 MHz..85 MHz) DS:(0 MHz..0 MHz)
Best Match = 0: US:(5 MHz..85 MHz) DS:(108 MHz..1218 MHz)
Switchable diplexer ECN support disabled. NOT switching diplexer.
[00:08:33 01/01/1970] [CmDocsisCtlThread]
BcmCmMdDsSgDiscState::TrimSgSetWithoutThisDcid:
1 candidate MD-DS-SG remain after TrimSgSetWithoutThisDcid( target_dcid )
for target_dcid=0x02 (2)
[00:08:33 01/01/1970] [CmDocsisCtlThread] BcmCmMdDsSgDiscState::StartMdDsSgDisc:
special case: one and only one MD-DS-SG contains mdd_dcid.
fMdDsSgId=0x1d (29)
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , M-d++a+i-+Ty-eA+dA++e|:
i_L-ca+A++e|A: 1
Chec+ +D_A++e|A
Cha++e+ Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1

MD-DS-SG discovery info:

fCmMdDsSgDiscState = 6 (kMdDsSgDiscDone)
fMdDsSgId = 0x1d (29)
fMdDsSgDiscovered = 1

Trimmed Candidate Downstream Service Group Settings List: list size = 1

sgid size member dcid's


---- ---- -------------
29 34 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
27 28 29 30 31 32 159 160

Downstream Active Channel Settings List:

dcid type frequency prim capable rpt enable mod/annex or PLC params
---- -------- --------- ------------ ---------- -----------------------
1 SC-QAM 531000000 y 0x36 256QAM/AnnexA
2 SC-QAM 539000000 y 0x36 256QAM/AnnexA
3 SC-QAM 547000000 y 0x36 256QAM/AnnexA
4 SC-QAM 555000000 y 0x36 256QAM/AnnexA
5 SC-QAM 563000000 y 0x36 256QAM/AnnexA
6 SC-QAM 571000000 y 0x36 256QAM/AnnexA
7 SC-QAM 579000000 y 0x36 256QAM/AnnexA
8 SC-QAM 587000000 y 0x36 256QAM/AnnexA
9 SC-QAM 595000000 y 0x36 256QAM/AnnexA
10 SC-QAM 603000000 y 0x36 256QAM/AnnexA
11 SC-QAM 611000000 y 0x36 256QAM/AnnexA
12 SC-QAM 619000000 y 0x36 256QAM/AnnexA
13 SC-QAM 627000000 y 0x36 256QAM/AnnexA
14 SC-QAM 635000000 y 0x36 256QAM/AnnexA
15 SC-QAM 643000000 y 0x36 256QAM/AnnexA
16 SC-QAM 651000000 y 0x36 256QAM/AnnexA
17 SC-QAM 659000000 y 0x36 256QAM/AnnexA
18 SC-QAM 667000000 y 0x36 256QAM/AnnexA
19 SC-QAM 675000000 y 0x36 256QAM/AnnexA
20 SC-QAM 683000000 y 0x36 256QAM/AnnexA
21 SC-QAM 691000000 y 0x36 256QAM/AnnexA
22 SC-QAM 699000000 y 0x36 256QAM/AnnexA
23 SC-QAM 707000000 y 0x36 256QAM/AnnexA
24 SC-QAM 715000000 y 0x36 256QAM/AnnexA
25 SC-QAM 723000000 y 0x36 256QAM/AnnexA
26 SC-QAM 731000000 y 0x36 256QAM/AnnexA
27 SC-QAM 739000000 y 0x36 256QAM/AnnexA
28 SC-QAM 747000000 y 0x36 256QAM/AnnexA
29 SC-QAM 755000000 y 0x36 256QAM/AnnexA
30 SC-QAM 763000000 y 0x36 256QAM/AnnexA
31 SC-QAM 771000000 y 0x36 256QAM/AnnexA
32 SC-QAM 779000000 y 0x36 256QAM/AnnexA
159 OFDM PLC 897000000 n 0x36 25Khz/5us/0.625us
160 OFDM PLC 361000000 n 0x36 50Khz/0.9375us/0.625us

Trimmed Downstream Ambiguity Resolution Frequency List: list size = 3

531000000-sc_qam 539000000-sc_qam 547000000-sc_qam

visible dcid set = 2

freq with visible dcid set = 539000000

BcmCmDocsisCtlMsgACT::HandleEvent() @time=514260 event_code=11 (kCmMdDsSgDiscDone)

BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=true
[00:08:34 01/01/1970] [CmDocsisCtlThread]
BcmDocsisCmHalIf::SetPrimaryDownstreamChannel: (DOCSIS CableModem HalIf)
Installing primary downstream channel index: 0
SetRatios called with primary downstream channel number = 0
AnnexMode[0] = 1 QAM_Mode[0] = 256
Num/Den = 869/1280
3390 SCDMA/OFDM mode - ChannelNumber = 0 Numerator = 869 Denominator = 1280
CM/CmHal> [00:08:34 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL failed to acquire sync or lost sync!
... TCOFDM - DTR is now locked.... (T2=150ms Sync=14)

Given a 216 MHz TCOFDM clock, the nominal value for the DTR FCW is 0xC22E45067
The DTR FCW is 0xc22e91d8 - that value is good (6, within 100 ppm)
Kicked off the DPLL
LE Done bit was set
LE Done bit was set
SCQAM DS clock source.
PLL in Leaky mode.
PLL Fn = 6, k1 = 18, k2 = 19
[00:08:34 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context=1 (ErrorRecovery)
[00:08:34 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context is error recovery or startup.
Always use last good upstream target chan id=1
[00:08:34 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper) Locked on the downstream. Waiting for UCDs...
[00:08:34 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefFail: (Cm
Multi US Helper) target hwTxId=0
CM/CmHal> [00:08:36 01/01/1970] [CmDocsisCtlThread]
BcmCmMultiUsHelper::TmUcdRxTimerEvent: (Cm Multi US Helper)
ucd gathering ok.

[00:08:36 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper) state at
entry:

Channel targeting:
Downstream:
fTargetDsFreqHz = 0 (0)
fCurrentDsFreqHz = 0x20207cc0 (539000000)
fStoredDsFreqHz = 0x29020c00 (688000000)

Upstream:
fDestSingleTxTargetUsChanId = 0x1 (1)
fTargetingContext = 1 (ErrorRecovery)

Startup UCD Selection Info:

low priority candidate ucid list = 2 4 3 1 8 6 5 7


happy home ucid set = 1 2 3 4

Upstream Active Channel Settings:

ucid rpt enable sel prio MAP source dcid's


---- ---------- -------- -----------------
1 0x1c0 0
2 0x1c0 0
3 0x1c0 0
4 0x1c0 0
5 0x1c0 0
6 0x1c0 0
7 0x1c0 0
8 0x1c0 0

BcmCmUsTargetMset (a.k.a. usable UCDs gathered during startup):

us config
phy change ranging scdma
type ucid dcid count tried? enabled?
---- ---- ---- ------ ------- --------
3 1 2 4 n n
3 2 2 4 n n
3 3 2 4 n n
3 4 2 4 n n
3 5 2 4 n n
3 6 2 4 n n
3 7 2 4 n n
3 8 2 4 n n

[00:08:36 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper)
starting docs3 upstream initialization on target ucid=2
with upstream phy type 3 on hardware transmitter index 0

[00:08:36 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::ExecuteTccCmd: hwTxId=0


docs ucid=0
[00:08:36 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0
[00:08:36 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::InstallUsSets: Installing
UCD w/ucid for UCID=2 for CM hardware tx chan 0

[00:08:36 01/01/1970] [CmDocsisCtlThread]


BcmCmUsSetsState::TestAndLaunchUsTimeSync: starting upstream time sync
acquisition...
[00:08:36 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefOk: (Cm
Multi US Helper) target hwTxId=0
[00:08:36 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::UsTimeRefOk: upstream time
sync acquired for fHwTxId=0

== Beginning initial ranging for Docsis UCID 2 ==


Minimum transmit power is 17 dBmV
Maximum transmit power is 53 dBmV
Stored power level for UCID 2 is 38 dBmV
Using per transmitter stored initial upstream power = 38 dBmV hwTxId = 0 docsis
UCID = 2
RNG-RSP UsChanId=2 Adj: tim=1908 freq=-2 Stat=Continue (CmdPwr (UsChanId-dBmV):
(2-40.50) )
[00:08:37 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0xc9
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (2-
41.00) )
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (2-
41.00) )
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (2-
41.00) )
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (2-
41.00) )
RNG-RSP UsChanId=2 Adj: tim=0 freq=0 Stat=Success (CmdPwr (UsChanId-dBmV): (2-
41.00) )
[00:08:42 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::FirstRngSuccess:
(CmDocsisCtlThread)
first RNG-RSP w/status==SUCCESS for hwTxId=0 and DOCSIS ucid=2
[00:08:42 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::LaunchEaeBpkm:
(CmDocsisCtlThread) BPKM enabled. starting Early Authentication and Encryption BPKM
key requests. Primary Sid = 201
CM/CmHal> cd /

Active Command Table: CM DOCSIS Commands (CM)

CM

CM>
CM>
CM>
CM> cd /doc

Active Command Table: CM DOCSIS Control Thread Commands (docsis_ctl)

CM -> docsis_ctl

CM/DocsisCtl> goto_ds 555

Moving to Downstream Frequency 555000000 Hz.


[00:10:18 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::Reset:
(CmDocsisCtlThread) DefaultSnmpAgentClass::RestartPendingEvent for Vendor CM
Agent w/ BRCM Factory Support
Vendor CM Agent w/ BRCM Factory Support updating ifTableLastChange.
Vendor CM Agent w/ BRCM Factory Support resetting to default state.
Vendor CM Agent w/ BRCM Factory Support destroying users...
Vendor CM Agent w/ BRCM Factory Support destroying notifies...
Vendor CM Agent w/ BRCM Factory Support destroying views...

CM/DocsisCtl> Allowing DOCS-CABLE-DEVICE-MIB IP filters.


Vendor CM Agent w/ BRCM Factory Support deferring traps.
Received RG Event 0x80000001 State 0x1
eRouter Linux WAN Down
[00:10:19 01/01/1970] [eRouterMsgPipe] eRouterMsgPipe::UpdateIpNetToMediaEntry:
(eRouterMsgPipe) eRouter IP address:0.0.0.0
00:10:19.110 01/01/1970 (CALC) mtaCmStatusInfo() - MTA is Signaled: *NOT-
OPERATIONAL* (Stat=0x1) emtaCurState = 0.
EmtaSnmpAgent::SoftReset
Pausing trap thread
emta factory agentResetting to default state.
emta factory agent destroying users...
emta factory agent destroying notifies...
emta factory agent destroying views...
emta factory agent entering RFC-2576 Coexistence security mode.
emta factory agent entering Basic/Hybrid flow provisioning mode.
Resuming trap thread
Stopping DHCP/ToD/TFTP (client requested)...
[00:10:19 01/01/1970] [CmDocsisIpThread] BcmEcosIpHalIf::RemoveIpv6Address: (IP
Stack1 HalIf) ERROR - Failed to remove IPv6 address fe80::fe4a:e9ff:fede:ad88/64
from the stack!
[00:10:19 01/01/1970] [CmDocsisIpThread] BcmDhcpV6ClientIf::ReleaseAddresses:
(DHCPv6 ClientIf for IP Stack1) ERROR - IA state is initial; there is no address to
release.
BcmDocsis3DsMacEnableMulticastDsidForwarding 0; primary DS = 0
SCQAM DSID filter control = 0x00
OFDM DSID filter control = 0x01
Deleting DOCSIS 1.0 CoS Settings for SID 0xc9
[00:10:19 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows:
(DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along
with associated Classifiers and PHS rules...
[00:10:19 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState:
(CmDocsisCtlThread)
[00:10:19 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Primary SID for usHwChannel 0 to 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 0
BcmDocsis31InitOcdDpdSettings() for ofdmCh 1
Updating US chan 8 data Profile test msg for Sid: 0x0.
Updating US chan 9 data Profile test msg for Sid: 0x0.
CM/DocsisCtl> [00:10:20 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL declared PULSE lost!
BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=false
[00:10:20 01/01/1970] [CmDocsisCtlThread] BcmCmMultiDsHelper::PreRegDsChanChange:
target freq hz = 555000000
reason string = ConsoleCmdOverride
CmInitReason = 16

Starting DS scanning at 555000000 Hz...


[00:10:20 01/01/1970] [CmDocsisCtlThread] BcmCmDownstreamScan::StartScan: Starting
DS scan
Scanning 555.000 MHz PLC/SC-QAM (ConsoleCmdOverride) locked SC-QAM
[00:10:20 01/01/1970] [CmDocsisCtlThread] BcmCmDsChan::DsLockOk: (BcmCmDsChan 0)
hwRxId=0 freq=0 dcid=0

******************************************
DOWNSTREAM STATUS
******************************************
HW Channel ID = 0
Phy type: SC-QAM
DS active chan settings:
ds chan id = 0
center freq, Hz = 555000000 Hz
primary capable = false
status event rpt bitmask = 0

CM HW Detected DS Phy Settings:


Center Freq, Hz = 555000000
QAM = Locked
FEC = Locked
Carrier Freq Offset, kHz = 0
Channel Width, Hz = 8000000
Modulation = Qam256
Interleaver = Taps12Incr17
Symbol Rate, sym/sec = 6952000

******************************************

[00:10:20 01/01/1970] [CmDocsisCtlThread]


BcmCmMacDomainSetsState::StartDsMacMddInit:
**********************************************
Waiting for MDDs...
**********************************************

CM/DocsisCtl>
BcmCmDocsisCtlMsgACT::HandleEvent() @time=621660 event_code=4 (kCmPriDsMddSetsOk)
MDD diplexer band edge not specified.
MDD Plant US Frequency Range = extended.
Requested Spectrum = US:(0 MHz..85 MHz) DS:(0 MHz..0 MHz)
Best Match = 0: US:(5 MHz..85 MHz) DS:(108 MHz..1218 MHz)
Switchable diplexer ECN support disabled. NOT switching diplexer.
[00:10:21 01/01/1970] [CmDocsisCtlThread]
BcmCmMdDsSgDiscState::TrimSgSetWithoutThisDcid:
1 candidate MD-DS-SG remain after TrimSgSetWithoutThisDcid( target_dcid )
for target_dcid=0x04 (4)
[00:10:21 01/01/1970] [CmDocsisCtlThread] BcmCmMdDsSgDiscState::StartMdDsSgDisc:
special case: one and only one MD-DS-SG contains mdd_dcid.
fMdDsSgId=0x1d (29)
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id:
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , M-d++a+i-+Ty-eA+dA++e|:
i_L-ca+A++e|A: 1
Chec+ +D_A++e|A
Cha++e+ Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Check kDsAnnexA
Channel Id: , ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1
Channel Id: ?, ModulationTypeAndAnnex:
isLocalAnnexA: 1

MD-DS-SG discovery info:

fCmMdDsSgDiscState = 6 (kMdDsSgDiscDone)
fMdDsSgId = 0x1d (29)
fMdDsSgDiscovered = 1

Trimmed Candidate Downstream Service Group Settings List: list size = 1

sgid size member dcid's


---- ---- -------------
29 34 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
27 28 29 30 31 32 159 160

Downstream Active Channel Settings List:

dcid type frequency prim capable rpt enable mod/annex or PLC params
---- -------- --------- ------------ ---------- -----------------------
1 SC-QAM 531000000 y 0x36 256QAM/AnnexA
2 SC-QAM 539000000 y 0x36 256QAM/AnnexA
3 SC-QAM 547000000 y 0x36 256QAM/AnnexA
4 SC-QAM 555000000 y 0x36 256QAM/AnnexA
5 SC-QAM 563000000 y 0x36 256QAM/AnnexA
6 SC-QAM 571000000 y 0x36 256QAM/AnnexA
7 SC-QAM 579000000 y 0x36 256QAM/AnnexA
8 SC-QAM 587000000 y 0x36 256QAM/AnnexA
9 SC-QAM 595000000 y 0x36 256QAM/AnnexA
10 SC-QAM 603000000 y 0x36 256QAM/AnnexA
11 SC-QAM 611000000 y 0x36 256QAM/AnnexA
12 SC-QAM 619000000 y 0x36 256QAM/AnnexA
13 SC-QAM 627000000 y 0x36 256QAM/AnnexA
14 SC-QAM 635000000 y 0x36 256QAM/AnnexA
15 SC-QAM 643000000 y 0x36 256QAM/AnnexA
16 SC-QAM 651000000 y 0x36 256QAM/AnnexA
17 SC-QAM 659000000 y 0x36 256QAM/AnnexA
18 SC-QAM 667000000 y 0x36 256QAM/AnnexA
19 SC-QAM 675000000 y 0x36 256QAM/AnnexA
20 SC-QAM 683000000 y 0x36 256QAM/AnnexA
21 SC-QAM 691000000 y 0x36 256QAM/AnnexA
22 SC-QAM 699000000 y 0x36 256QAM/AnnexA
23 SC-QAM 707000000 y 0x36 256QAM/AnnexA
24 SC-QAM 715000000 y 0x36 256QAM/AnnexA
25 SC-QAM 723000000 y 0x36 256QAM/AnnexA
26 SC-QAM 731000000 y 0x36 256QAM/AnnexA
27 SC-QAM 739000000 y 0x36 256QAM/AnnexA
28 SC-QAM 747000000 y 0x36 256QAM/AnnexA
29 SC-QAM 755000000 y 0x36 256QAM/AnnexA
30 SC-QAM 763000000 y 0x36 256QAM/AnnexA
31 SC-QAM 771000000 y 0x36 256QAM/AnnexA
32 SC-QAM 779000000 y 0x36 256QAM/AnnexA
159 OFDM PLC 897000000 n 0x36 25Khz/5us/0.625us
160 OFDM PLC 361000000 n 0x36 50Khz/0.9375us/0.625us

Trimmed Downstream Ambiguity Resolution Frequency List: list size = 3

531000000-sc_qam 539000000-sc_qam 547000000-sc_qam

visible dcid set = 4

freq with visible dcid set = 555000000

BcmCmDocsisCtlMsgACT::HandleEvent() @time=622260 event_code=11 (kCmMdDsSgDiscDone)

BcmSetDocsis31CmtsRegistration:Setting Docsis3TransmitMode=true
[00:10:22 01/01/1970] [CmDocsisCtlThread]
BcmDocsisCmHalIf::SetPrimaryDownstreamChannel: (DOCSIS CableModem HalIf)
Installing primary downstream channel index: 0
SetRatios called with primary downstream channel number = 0
AnnexMode[0] = 1 QAM_Mode[0] = 256
Num/Den = 869/1280
3390 SCDMA/OFDM mode - ChannelNumber = 0 Numerator = 869 Denominator = 1280
CM/DocsisCtl> [00:10:22 01/01/1970] [DocsisCmHalControlThread]
BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) WARNING - CM
HAL failed to acquire sync or lost sync!
... TCOFDM - DTR is now locked.... (T2=150ms Sync=14)

Given a 216 MHz TCOFDM clock, the nominal value for the DTR FCW is 0xC22E45067
The DTR FCW is 0xc22e92c5 - that value is good (6, within 100 ppm)
Kicked off the DPLL
LE Done bit was set
LE Done bit was set
SCQAM DS clock source.
PLL in Leaky mode.
PLL Fn = 6, k1 = 18, k2 = 19
[00:10:22 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper)
targeting context=5 (ConsoleCmdOverride)
[00:10:22 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::StartPreRegUsInit:
(Cm Multi US Helper) Locked on the downstream. Waiting for UCDs...
[00:10:22 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefFail: (Cm
Multi US Helper) target hwTxId=0
CM/DocsisCtl> [00:10:24 01/01/1970] [CmDocsisCtlThread]
BcmCmMultiUsHelper::TmUcdRxTimerEvent: (Cm Multi US Helper)
ucd gathering ok.

[00:10:24 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper) state at
entry:

Channel targeting:
Downstream:
fTargetDsFreqHz = 0x2114a0c0 (555000000)
fCurrentDsFreqHz = 0x2114a0c0 (555000000)
fStoredDsFreqHz = 0x29020c00 (688000000)

Upstream:
fDestSingleTxTargetUsChanId = 0 (0)
fTargetingContext = 5 (ConsoleCmdOverride)

Startup UCD Selection Info:

low priority candidate ucid list = 4 2 3 1 5 6 7 8


happy home ucid set = 1 2 3 4

Upstream Active Channel Settings:

ucid rpt enable sel prio MAP source dcid's


---- ---------- -------- -----------------
1 0x1c0 0
2 0x1c0 0
3 0x1c0 0
4 0x1c0 0
5 0x1c0 0
6 0x1c0 0
7 0x1c0 0
8 0x1c0 0

BcmCmUsTargetMset (a.k.a. usable UCDs gathered during startup):

us config
phy change ranging scdma
type ucid dcid count tried? enabled?
---- ---- ---- ------ ------- --------
3 1 4 4 n n
3 2 4 4 n n
3 3 4 4 n n
3 4 4 4 n n
3 5 4 4 n n
3 6 4 4 n n
3 7 4 4 n n
3 8 4 4 n n

[00:10:24 01/01/1970] [CmDocsisCtlThread]


BcmCmMultiUsHelper::TargetNextDocs3CandidateUcid: (Cm Multi US Helper)
starting docs3 upstream initialization on target ucid=4
with upstream phy type 3 on hardware transmitter index 0

[00:10:24 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::ExecuteTccCmd: hwTxId=0


docs ucid=0
[00:10:24 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0
[00:10:24 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::InstallUsSets: Installing
UCD w/ucid for UCID=4 for CM hardware tx chan 0

[00:10:24 01/01/1970] [CmDocsisCtlThread]


BcmCmUsSetsState::TestAndLaunchUsTimeSync: starting upstream time sync
acquisition...
[00:10:24 01/01/1970] [CmDocsisCtlThread] BcmCmMultiUsHelper::UsTimeRefOk: (Cm
Multi US Helper) target hwTxId=0
[00:10:24 01/01/1970] [CmDocsisCtlThread] BcmCmUsChan::UsTimeRefOk: upstream time
sync acquired for fHwTxId=0

== Beginning initial ranging for Docsis UCID 4 ==


Minimum transmit power is 17 dBmV
Maximum transmit power is 53 dBmV
Stored power level for UCID 4 is 42 dBmV
Using per transmitter stored initial upstream power = 42 dBmV hwTxId = 0 docsis
UCID = 4
RNG-RSP UsChanId=4 Adj: tim=1860 freq=-2 Stat=Continue (CmdPwr (UsChanId-dBmV):
(4-41.25) )
[00:10:25 01/01/1970] [CmDocsisCtlThread] BcmDocsisCmHalIf::SetPrimarySid: (DOCSIS
CableModem HalIf) Setting the Startup SID to 0xc9
RNG-RSP UsChanId=4 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (4-
41.25) )
RNG-RSP UsChanId=4 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (4-
41.25) )
RNG-RSP UsChanId=4 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (4-
41.25) )
RNG-RSP UsChanId=4 Adj: tim=0 freq=0 Stat=Continue (CmdPwr (UsChanId-dBmV): (4-
41.25) )
RNG-RSP UsChanId=4 Adj: tim=0 freq=0 Stat=Success (CmdPwr (UsChanId-dBmV): (4-
41.25) )
[00:10:30 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::FirstRngSuccess:
(CmDocsisCtlThread)
first RNG-RSP w/status==SUCCESS for hwTxId=0 and DOCSIS ucid=4
[00:10:30 01/01/1970] [CmDocsisCtlThread] BcmCmDocsisCtlThread::LaunchEaeBpkm:
(CmDocsisCtlThread) BPKM enabled. starting Early Authentication and Encryption BPKM
key requests. Primary Sid = 201
CM/DocsisCtl>

Active Downstream Channel Diagnostics:

rx id dcid freq, hz qam fec snr, dB power, dBmV modulation


plc prfA
----- ---- ---------- --- --- --------- ----------- ----------
0* 4 555000000 y y 43 -1 Qam256

* indicates currently configured primary downstream channel

You might also like