Scribd
Upload
16 views

Parallel + Series (1)

The document is a course assessment for Circuits-2, consisting of multiple-choice questions related to series and parallel RLC circuits, resonant frequency, and quality factor. It includes questions on the behavior of circuits at resonant and non-resonant frequencies, as well as calculations for circuit elements and power factors. The total marks for the assessment are 11, with various options provided for each question.

Uploaded by

karim
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
16 views

Parallel + Series (1)

The document is a course assessment for Circuits-2, consisting of multiple-choice questions related to series and parallel RLC circuits, resonant frequency, and quality factor. It includes questions on the behavior of circuits at resonant and non-resonant frequencies, as well as calculations for circuit elements and power factors. The total marks for the assessment are 11, with various options provided for each question.

Uploaded by

karim
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Credit Hours Program Program: CCE

Circuits-2
Course ELCN 112 Course Title:
Code:
Duration: 30 minutes Full Mark: 10

Name: ID:

Choose the Correct Answers (11 Marks)

1. At resonant frequency, the magnitude of the voltage across capacitor is


the magnitude of the voltage across inductor.
a) greater than b) less than
c) greater than or equal to d) equal to
2. In a series RLC circuit that is operating above the resonant frequency, the
current the supply voltage
a) is in phase with b) leads
c) lags d) None of these
3. As 𝑋𝑋𝐿𝐿 = 𝑋𝑋𝐶𝐶 in a series resonance circuit, the impedance is
a) purely capacitive b) purely inductive
c) purely resistive d) capacitive and inductive
4. A series RLC circuit remains predominately inductive
a) at resonance frequency b) below resonance frequency
c) above resonance frequency d) at lower half power frequency

5. In a series RLC circuit. if the capacitor value 𝐶𝐶 is decreased to one-fourth of


its original value while the other elements are kept to its original value.
The output current at resonance is
a) decreased to its quarter b) will not change

c) doubled d) increased four times


6. A RLC series circuit has a total resistance of 1𝐾𝐾Ω . Its half power
frequencies are 10𝐾𝐾𝐾𝐾𝐾𝐾 and 90𝐾𝐾𝐾𝐾𝐾𝐾 . Quality factor of the circuit is
a) 2.333 b) 0.375 c) 0.925 d) 1.625

7. In a series RLC circuit, the larger reactance determines the net reactance of
the circuit.
a) True b) False
8. A series RLC circuit resonates at 1.5𝐾𝐾𝐾𝐾𝐾𝐾 and consumes 50𝑊𝑊 from a 50𝑉𝑉
AC operating source at the resonant frequency. If the bandwidth is
0.75𝐾𝐾𝐾𝐾𝐾𝐾, then What are the values of the circuit elements 𝐿𝐿 and 𝐶𝐶 ?
a) 25Ω and 5.31𝑚𝑚𝑚𝑚 b) 50Ω and 10.6𝑚𝑚𝑚𝑚
c) 50Ω and 66.6𝑚𝑚𝑚𝑚 d) 2.5Ω and 1.06𝑚𝑚𝑚𝑚
9. For a series resonance circuit, given that the quality factor of the circuit
𝑄𝑄𝑠𝑠 = 20 and the Bandwidth 𝐵𝐵𝐵𝐵 = 200𝐻𝐻𝐻𝐻 What are the values of the cut-
off frequencies 𝑓𝑓1 , 𝑓𝑓2 (KHZ)?
a) 3.9, 4.1 b) 7.9, 8.1

c) 1.9, 2.1 d) 5.9, 6.1


10.The power factor of purely resistive circuit is …………………...
a) unity b) lagging
c) zero d) leading

11.The parallel circuit shown above has the


associated response curve. if the inductor value 𝐿𝐿
is decreased to one fourth of its original value
while the other elements are kept to its original
value.

The output voltage at resonance is


…………………...
a) decreased to its half

b) decreased to one eight


c) doubled
d) increased four times

12.The resonant frequency for the circuit given is:


…………………... (rad/sec)

Given that ( 𝐿𝐿 = 4𝐻𝐻 , 𝑅𝑅𝑐𝑐 = 1Ω , 𝐶𝐶 = 1𝐹𝐹 )

a) √3 b) 1
3 3

c) √3 d) 3
13.In a simple parallel resonance circuit, if the circuit elements R,
L, C are doubled, then 𝑄𝑄𝑝𝑝

a) increase by factor √2 b) increase by factor 2


c) decrease by factor √2 d) decrease by factor 2
14.The shape of impedance vs frequency curve for a parallel resonance circuit
is given by …………………...

c) Both are valid d) none of the above

15. For the response curve shown:


Using 𝐿𝐿 = 2𝑚𝑚𝑚𝑚 , 𝑅𝑅𝑙𝑙 = 10Ω ,𝐼𝐼𝑠𝑠 = 0.4𝑚𝑚𝑚𝑚 and 𝑅𝑅𝑠𝑠 = 25.1𝐾𝐾Ω
Given that: 𝑓𝑓1 = 78𝐾𝐾𝐾𝐾𝐾𝐾 , 𝑓𝑓𝑝𝑝 = 80𝐾𝐾𝐾𝐾𝐾𝐾 , 𝑓𝑓2 = 82𝐾𝐾𝐾𝐾𝐾𝐾
What is the value of additional Resistance R
required to achieve this response?

a) 101.1 𝐾𝐾Ω b) 20.11 𝐾𝐾Ω c) 1 𝐾𝐾Ω d) No

You might also like