Data Sheet

Cisco Catalyst IE3300 Rugged

Series

© 2019 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 1 of 16
Contents
Product Overview 3
Features and Benefits 4
Products Overview 4
Product Specifications 5
System Dimensions 6
Ordering Information 15
Warranty 16
Cisco Services 16
Cisco Capital 16

© 2019 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 2 of 16
The Cisco Catalyst® IE3300 Rugged Series ushers in mainstream adoption of Gigabit Ethernet
connectivity in a compact, form-factor, modular switch that is purpose-built for a wide variety of
extended enterprise and industrial applications.

Product Overview
Cisco Catalyst IE3300 Rugged Series switches deliver high-speed Gigabit Ethernet connectivity in a compact form factor,
and are designed for a wide range of industrial applications where hardened products are required. The modular design of
the Cisco Catalyst IE3300 Rugged Series offers the flexibility to expand to up to 26 ports of Gigabit Ethernet with a range
of expansion module options. The platform is built to withstand harsh environments in manufacturing, energy,
transportation, mining, smart cities, and oil and gas. The IE3300 platform is also ideal for extended enterprise
deployments in outdoor spaces, warehouses, and distribution centers.

These switches run Cisco IOS® XE, a next-generation operating system with built-in security and trust, featuring secure
boot, image signing, and the Cisco® Trust anchor module. Cisco IOS XE also provides API-driven configuration with open
APIs and data models.

The Cisco Catalyst IE3300 Rugged Series can be managed with powerful management tools such as Cisco DNA Center
and Cisco Industrial Network Director, and can be easily set up with a completely redesigned user-friendly modern GUI
tool called WebUI. The platform also supports Flexible NetFlow (FNF) for real-time visibility into traffic patterns and
threat analysis with Cisco Stealthwatch®.

The IE3300 series (with expansion module) supports up to 24 ports of PoE or 16 ports of PoE+ that is ideal for connecting
PoE-powered end devices such as IP cameras, phones, wireless access points, sensors, and more.

Figure 1.

© 2019 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 3 of 16
Features and Benefits
Table 1. IE3300 Features and Benefits

Feature Benefit

Robust industrial design ● Built for harsh environments and temperature ranges (-40°C to +75°C)
● Fanless, convection-cooled with no moving parts for extended durability
● Hardened for vibration, shock and surge, and electrical noise immunity
● Complies with multi-industry specifications for automation, ITS, and substation environments
● Improves uptime, performance, and safety of industrial systems and equipment
● Covers a wide range of Power over Ethernet (PoE) application requirements
● Alarm I/O for monitoring and signaling to external equipment

Full Gigabit Ethernet ● Provides secure access for new high-speed applications in the industrial space
interfaces ● Packs up to 10 ports of GE - 2x1 Gigabit Small Form-Factor Pluggable (SFP) uplinks plus 8x1 Gigabit copper or PoE+
RJ45 downlinks in a small form-factor base system
● Expandable to 26 ports of GE by attaching one of 7 compatible modules (copper, PoE, fiber options)
● Connects high-speed wireless access points (802.11n, 802.11ac)

● Enables High-Definition (HD) IP cameras and Programmable Logic Controller (PLC)

● Delivers multiple rings and redundant ring topology for new network configurations
● Extends geographical scalability where longer-distance connectivity is required

High-density industrial Power ● Supports up to 24 PoE or 16 PoE+ ports

over Ethernet (PoE) ● Controls costs by limiting wiring, distribution panels, and circuit breakers
● Reduces equipment needs, thus requiring less space and reducing heat dissipation
● Enables ready-to-use PoE devices, such as IP phones, cameras, and wireless access points

User-friendly GUI, called ● Allows for easy configuration and monitoring

WebUI ● Eliminates the need for more complex, terminal emulation programs

● Reduces the cost of deployment

SwapDrive for zero- ● True zero-configuration and simple switch replacement in the event of a failure
configuration replacement ● No networking expertise required
● Helps ensure fast recovery

Flexible NetFlow (FNF) ● Provides enhanced flow and threat visibility

● Enables optimization of the network infrastructure, reduces operation costs, and improves capacity planning and
security incident detection

Products Overview
Table 2. Product feature sets

Product family Platforms supported Cisco IOS Software image (feature sets) supported

IE3000 IE3300 Network Essentials

© 2019 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 4 of 16
Product Specifications
Table 3 highlights the hardware configuration for Cisco Catalyst IE3300 Rugged Series switches.

Table 3. IE3300 Hardware Configurations

Hardware specification Cisco IE-3300-8T2S-E Cisco IE-3300-8P2S-E

Total 100/1000 ports 10 10

SFP-based ports 2 2

PoE/PoE+ ports 0 8

PoE power budget Not applicable 360W1 (including expansion module)

Removable storage SD card2 SD card2

Alarm inputs 2 alarms in, 1 alarm out 2 alarms in, 1 alarm out

Console ports 1 RS-232 (via RJ-45), 1 USB Mini Type B 1 RS-232 (via RJ-45), 1 USB Mini Type B

Power inputs Dual DC power inputs Dual DC power inputs

1
In order to achieve 360W power budget, the minimum power requirements as specified in Table 7 for the switch need to be considered when selecting the
power supply.
2
The SD card is optional and is not shipped by default with the switch.

Figure 2.

Table 4 highlights the hardware configuration for Cisco Catalyst IE3300 Rugged Series modules.

Table 4. Hardware Configuration for Cisco Catalyst IE3300 Rugged Series Modules

Descriptions Total ports on Copper (RJ45) PoE/PoE+ SFP Total system ports
expansion module (including
expansion module)

IEM-3300-8T= 8 8 - - 18

IEM-3300-8P= 8 - 8 18

IEM-3300-8S= 8 - - 8 18

IEM-3300-16T= 16 16 26

IEM-3300-16P= 16 - 16 - 26

© 2019 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 5 of 16
 Descriptions Total ports on Copper (RJ45) PoE/PoE+ SFP Total system ports
expansion module (including
expansion module)

IEM-3300-6T2S= 8 6 - 2 18

IEM-3300-14T2S= 16 14 - 2 26

Table 5 highlights the physical configuration for Cisco Catalyst IE3300 Rugged Series switches and modules.

Table 5. IE3300 physical Configurations

PID details Dimensions (H x W x D) Weight Mounting

IE-3300-8T2S-E 6 in. X 3.6 in. X 5.3 in. 3.75 lbs DIN rail

IE-3300-8P2S-E 6 in. X 3.6 in. X 5.3 in. 3.75 lbs DIN rail

IEM-3300-8T= 6 in. X 2.4 in. X 5.3 in. 1.94 lbs DIN rail

IEM-3300-8P= 6 in. X 2.4 in. X 5.3 in. 1.94 lbs DIN rail

IEM-3300-8S= 6 in. X 2.4 in. X 5.3 in. 2.06 lbs DIN rail

IEM-3300-16T= 6 in. X 3.4 in. X 5.3 in. 2.06 lbs DIN rail

IEM-3300-16P= 6 in. X 3.4 in. X 5.3 in. 2.06 lbs DIN rail

IEM-3300-6T2S= 6 in. X 2.4 in. X 5.3 in. 1.94 lbs DIN rail

IEM-3300-14T2S= 6 in. X 3.4 in. X 5.3 in. 2.06 lbs DIN rail

System Dimensions
Front View

© 2019 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 6 of 16
Module Dimensions – Front View

Top View

Table 6 highlights the performance and scalability features for Cisco Catalyst IE3300 Rugged Series switches.

Table 6. IE3300 Performance and Scalability Features

Features Cisco IE-3300-8T2S-E Cisco IE-3300-8P2S-E

Forwarding rate Line rate for all ports and all packet sizes Line rate for all ports and all packet sizes

Number of queues 8 8

Unicast MAC addresses 8K 8K

Internet Group Management 1K 1K

Protocol (IGMP) multicast groups

VLAN IDs 256 256

Spanning Tree Protocol (STP) 128 128

instances

Access Control Lists (PACL) 1.5K 1.5K

© 2019 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 7 of 16
 Features Cisco IE-3300-8T2S-E Cisco IE-3300-8P2S-E

DRAM 2 GB 2 GB

Flash 1.5 GB 1.5 GB

SD card capacity1 4 GB 4 GB

1
The SD card is optional and is not shipped by default with the switch.

Table 7 highlights the power specifications for Cisco Catalyst IE3300 Rugged Series switches.

Table 7. IE3300 Power Specifications

Features Cisco IE-3300-8T2S-E Cisco IE-3300-8P2S-E

Input voltage range Redundant DC input voltage: nominal 9.6 to 60VDC Redundant DC input voltage: nominal 9.6 to
60VDC
48VDC is required for PoE and 54VDC is required
for PoE+

Maximum Input current 4.5A 10.6A

Power consumption1 33W 35W

1
Power consumption for non PoE supported model is measured at 12V and for the PoE supported model is measured at 54V. Power consumption does
not include PoE power.

Table 8 highlights the power specifications for supported expansion modules in Cisco Catalyst IE3300 Rugged Series
switches.

Table 8. IEM3300 modules Power Consumption

Product ID detail Power Consumption1

IEM-3300-8T= 7W

IEM-3300-8P= 18W

IEM-3300-8S= 13W

IEM-3300-16T= 13W

IEM-3300-16P= 24W

IEM-3300-6T2S= 8W

IEM-3300-14T2S= 15W

1
Power consumption for non PoE supported model is measured at 12V and for the PoE supported model is measured at 54V.

© 2019 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 8 of 16
Table 9 highlights the power supply options for Cisco Catalyst IE3300 Rugged Series switches.

Table 9. Power Supply Options

Features Wattage Rated nominal input operating range PoE/PoE+ support1

PWR-IE50W-AC= 50W AC 100-240V/1.25A 50-60Hz No

or
DC 125-250V/1.25A

PWR-IE50W-AC-L=2 50W AC 100-240V/1.0A 50-60Hz No

PWR-IE65W-PC-AC= 65W AC 100-240V / 1.4A 50-60Hz Yes

or
DC 125-250V / 1.0A

PWR-IE65W-PC-DC= 65W DC 24-48VDC / 4.5A Yes

PWR-IE170W-PC-AC= 170W AC 100-240V / 2.3A 50-60Hz Yes

or
DC 125-250V / 2.1A

PWR-IE170W-PC-DC= 170W DC 12-54VDC / 2.3A Yes

PWR-IE240W-PCAC-L=2 240W AC 100-240V/2.5A 50-60Hz Yes

PWR-IE480W-PCAC-L=2 480W AC 100-240V/5.0A 50-60Hz Yes

1
The entire power budget for the switch and PoE ports must stay within the power supply.
2
The power supplies are not certified for smart grid and hazardous locations. These power supplies are IP20 rated.

Table 10 highlights the supported software features for Cisco Catalyst IE3300 Rugged Series switches.

Table 10. Key Supported Software Features

Network Essentials Features

License(default)

Layer 2 switching IEEE 802.1, 802.3 standard, NTP, UDLD, CDP, LLDP, unicast MAC filter, VTPv2, VTPv3, EtherChannel,
voice VLAN, PVST+, MSTP, and RSTP

Multicast IGMPv1, v2, v3 snooping, IGMP filtering, IGMP querier

Management WebUI, MIB, SmartPort, SNMP, syslog, DHCP server, SPAN session, RSPAN, Express setup

Security Port security, 802.1x, Dynamic Host Configuration Protocol (DHCP) snooping, dynamic ARP inspection, IP
source guard, guest VLAN
MAC authentication bypass, 802.1x multidomain authentication, storm control - unicast, multicast,
broadcast, SCP, SSH, SNMPv3, TACACS+, RADIUS server/client, MAC address notification, BPDU guard,
Port ACL, Flexible NetFlow (FNF)

Quality of Service (QoS) Ingress policing, rate limit, egress queuing and shaping, auto QoS

Layer 2 IPv6 IPv6 host support, SNMP over IPv6

Layer 3 routing Inter-VLAN routing

© 2019 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 9 of 16
 Network Essentials Features
License(default)

Industrial Ethernet CIP Ethernet/IP, IEEE 1588 PTP v2

Redundancy Resilient Ethernet Protocol (REP) ring

Utility Dying gasp

Table 11 highlights the compliance specifications for Cisco Catalyst IE3300 Rugged Series switches.

Table 11. Compliance Specifications1

Descriptions Specifications

Electromagnetic emissions FCC 47 CFR Part 15 subpart B Class A

EN 55032/CISPR 32 Class A
VCCI Class A
AS/NZS CISPR 32 Class A
CISPR 11 Class A
ICES 003 Class A
CNS 13438 Class A
KN 32 Class A
EN 300 386

Electromagnetic immunity CISPR 35

EN 55024
KN 35
EN 61000-4-2 Electro Static Discharge (air – 15kV, contact – 8kV)
EN 61000-4-3 Radiated RF (10V/m UTP, 20V/m STP)
EN 61000-4-4 Electromagnetic Fast Transients (4kV)
EN 61000-4-5 Surge (2KV/1KV Power, 4KV STP)
EN 61000-4-6 Conducted RF (10V UTP)
EN 61000-4-8 Power Frequency Magnetic Field (300A/m)
EN 61000-4-10 Pulsed Magnetic Field (30 A/m)
EN 61000-4-16 Conducted CM Disturbances (30V, Cont/ 300V, 1 sec)
EN 61000-4-17 Ripple Immunity DC Power (10%)
EN 61000-4-18 Damped Oscillatory Wave (2.5kV, 1MHz)
EN-61000-4-29 DC Voltage Dips and Interruptions

© 2019 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 10 of 16
 Descriptions Specifications

Industry standards EN 61000-6-2 Industrial Immunity

EN 61000-6-4 Industrial Emissions
EN 61000-6-1 Light Industrial Immunity
EN 61326-1 Measurement, Control & Laboratory Equipment
IEEE 1613 Electric Power Stations Communications Networking
EN/IEC 61850-3 Electric Substations Communications Networking
EN50121-4 Railway – Signaling and Telecommunications Apparatus [test in progress]
ODVA Industrial EtherNet/IP
IP30

Safety standards and Information Technology Equipment:

certifications UL/CSA 60950-1,CB to IEC 60950-1 with all country deviations
UL/CSA 62368-1, CB to IEC 62368-1 with all country deviations [test in progress]

Industrial floor (control equipment) 2:

UL/CSA 61010-2-201
CB report and certificate to IEC/EN 61010-2-201

Hazardous locations2:
UL121201(Class l, Div 2, groups A-D)
CSA 213 (Class l, Div 2, groups A-D)
UL/CSA 60079-0, -15 (Class l, Zone 2, Gc/IIC)
IEC 60079-0, -15 IECEx test report (Class l, Zone 2, Gc/IIC)
EN 60079-0, -15 ATEX certifícate (Class l, Zone 2, Gc/IIC)

Operating environment Operating temperature:

-40°C to +70°C (40 LFM vented enclosure)
-40°C to +60°C (sealed enclosure)
-34°C to +75°C (Min. 200 LFM fan or blower-equipped enclosure)
+85°C (type tested for 16 hours)
Altitude: up to 15,000 feet

Storage environment Temperature: -40°C to +85°C degrees

Altitude: 15,000 feet
IEC 60068-2-14

Humidity Relative humidity of 5% to 95% non-condensing

IEC 60068-2-78
IEC 60068-2-30

Shock and vibration IEC 60068-2-27 (operational shock, 50G, 3ms, half sine)
IEC 60068-2-27 (non-operational shock, 65-80G, 9ms, trapezoidal)
MIL-STD-810, Method 514.4

Corrosion EN 60068-2-52 (salt fog) - [test in progress]

EN 60068-2-60 (flowing mixed gas) - [test in progress]

© 2019 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 11 of 16
 Descriptions Specifications

Warranty Five-year limited hardware warranty on all IE3300 product IDs and all Industrial Ethernet (IE) power
supplies. See more information under the Warranty section

1
For more detailed information on safety approved power/thermal ratings refer the Hardware Installation Guide
2
In progress

Table 12 highlights Mean-Time-Between-Failures (MTBF) for Cisco Catalyst IE3300 Rugged Series switches.

Table 12. MTBF Information

Product ID detail Rated MTBF (hours)

IE-3300-8T2S-E 633,420

IE-3300-8P2S-E 611,350

IEM-3300-8T= 3,041,040

IEM-3300-8P= 2,931,233

IEM-3300-8S= 6,810,960

IEM-3300-16T= 1,594,210

IEM-3300-16P= 1,043,520

IEM-3300-6T2S= 3,729,130

IEM-3300-14T2S= 1,865,300

Table 13 highlights information about management and standards for Cisco Catalyst IE3300 Rugged Series switches.

Table 13. Management and Standards

Descriptions Specifications

IEEE standards IEEE 802.1D MAC Bridges, STP IEEE 802.3ah 100BASE-X SMF/MMF only
IEEE 802.1p Layer2 COS prioritization IEEE 802.3x full duplex on 10BASE-T
IEEE 802.1q VLAN IEEE 802.3 10BASE-T specification
IEEE 802.1s Multiple Spanning-Trees IEEE 802.3u 100BASE-TX specification
IEEE 802.1w Rapid Spanning-Tree IEEE 802.3ab 1000BASE-T specification
IEEE 802.1x Port Access Authentication IEEE 802.3z 1000BASE-X specification
IEEE 802.1AB LLDP IEEE 802.3af Power over Ethernet
IEEE 802.3ad Link Aggregation (LACP) IEEE 802.3at Power over Ethernet plus
IEEE 1588v2 PTP Precision Time Protocol

© 2019 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 12 of 16
 Descriptions Specifications

RFC compliance RFC 768: UDP RFC 1157: SNMPv1

RFC 783: TFTP RFC 1901,1902-1907 SNMPv2
RFC 791: IPv4 protocol RFC 2273-2275: SNMPv3
RFC 792: ICMP RFC 2571: SNMP Management
RFC 793: TCP RFC 1166: IP Addresses
RFC 826: ARP RFC 1256: ICMP Router Discovery
RFC 854: Telnet RFC 1305: NTP
RFC 959: FTP RFC 951: BootP
RFC 1492: TACACS+
RFC 1493: Bridge MIB Objects
RFC 1534: DHCP and BOOTP interoperation
RFC 1542: Bootstrap Protocol
RFC 1643: Ethernet Interface MIB
RFC 1757: RMON
RFC 2068: HTTP
RFC 2131, 2132: DHCP
RFC 2236: IGMP v2
RFC 3376: IGMP v3
RFC 2474: DiffServ Precedence
RFC 3046: DHCP Relay Agent Information Option
RFC 3580: 802.1x RADIUS
RFC 4250-4252 SSH Protocol

SNMP MIB objects 802.1X MIB CISCO-IF-EXTENSION-MIB

CISCO-DHCP-SNOOPING-MIB CISCO-IMAGE-MIB
CISCO-UDLDP-MIB CISCO-MEMORY-POOL-MIB
CISCO-ENVMON-MIB CISCO-PING-MIB
CISCO-PRIVATE-VLAN-MIB SNMP-TARGET-EXT-MIB
CISCO-PAE-MIB IF_MIB
Cisco-Port-QoS-MIB ENTITY-MIB
CISCO-ERR-DISABLE-MIB LLDP-EXT-PNO-MIB
CISCO- PROCESS-MIB NOTIFICATION-LOG-MIB
LLDP-MIB OLD-CISCO-CPU-MIB
CiscoMACNotification-MIB ETHERLIKE-MIB
CISCO-CONFIG-COPY-MIB OLD-CISCO-SYSTEM-MIB
LLDP-MED-MIB OLD-CISCO-MEMORY-MIB
Bridge-MIB RMON-MIB
CISCO-CAR-MIB SNMP-COMMUNITY-MIB
CISCO-LAG-MIB SNMP-FRAMEWORK-MIB
CISCO-SYSLOG-MIB SNMP-PROXY-MIB
CISCO-FTP-CLIENT-MIB SNMP-MPD-MIB
CISCO-VLAN-IFTABLE-RELATIONSHIP-MIB SNMP-NOTIFICATION-MIB
CISCO-VLAN-MEMBERSHIP-MIB SNMP-TARGET-MIB

© 2019 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 13 of 16
 Descriptions Specifications

Cisco-REP-MIB SNMP-USM-MIB
CISCO-PORT-STORM-CONTROL-MIB CISCO-DATACOLLECTION-MIB
CISCO-CDP-MIB CISCO-CABLE-DIAG-MIB
CISCO-IP-STAT-MIB CISCO -PORT-SECURITY-MIB
CISCO-LICENSE-MGMT-MIB BULK_FILE_MIB
CISCO-STP-EXTN-MIB NAC-NAD-MIB
CISCO-VTP-MIB CISCO-ENTITY-ALARAM-MIB
IEEE8023-LAG-MIB SNMP-VIEW-BASED-ACM-MIB
SMON-MIB CISCO-MAC-AUTH-BYPASS-MIB
CISCO-ACCESS-ENVMON-MIB CISCO-AUTH-FRAMEWORK-MIB
CISCO-CALLHOME-MIB CISCO-BRIDGE-Ext-MIB
CISCO-CONFIG-MAN-MIB SNMPv2-MIB
CISCO-FLASH-MIB CISCO-ENTITY-VENDORTYPE-OID-MIB
CISCO-PRODUCTS-MIB

Table 14 highlights information about supported SFPs for Cisco Catalyst IE3300 Rugged Series switches.

Table 14. SFP Support

Part number Specifications SFP type Temperature Maximum Cable type Dom support
range1 distance

GLC-FE-100FX-RGD 100BASE-FX FE IND 2 km Multimode fiber No

(MMF)

GLC-FE-100LX-RGD 100BASE-LX10 FE IND 10 km Single-Mode Fiber No

(SMF)

GLC-FE-100FX 100BASE-FX FE COM 2 km MMF No

GLC-FE-100LX 100BASE-LX10 FE COM 10 km SMF No

GLC-FE-100EX 100BASE-EX FE COM 40 km SMF No

GLC-FE-100ZX 100BASE-ZX FE COM 80 km SMF No

GLC-FE-100BX-U 100BASE-BX10 FE COM 10 km SMF No

GLC-FE-100BX-D 100BASE-BX10 FE COM 10 km SMF No

GLC-SX-MM-RGD 1000BASE-SX GE IND 220-550 m MMF Yes

GLC-LX-SM-RGD 1000BASE-LX/LH GE IND 550 m / 10 MMF / SMF Yes

km

GLC-ZX-SM-RGD 1000BASE-ZX GE IND 70 km SMF Yes

SFP-GE-S 1000BASE-SX GE EXT 220-550 m MMF Yes

SFP-GE-L 1000BASE-LX/LH GE EXT 550 m / 10 MMF / SMF Yes

km

© 2019 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 14 of 16
 Part number Specifications SFP type Temperature Maximum Cable type Dom support
range1 distance

SFP-GE-Z 1000BASE-ZX GE EXT 70 km SMF Yes

GLC-BX-U 1000BASE-BX10 GE COM 10 km SMF Yes

GLC-BX-D 1000BASE-BX10 GE COM 10 km SMF Yes

GLC-SX-MM 1000BASE-SX GE COM 220-550 m MMF Yes

GLC-LH-SM 1000BASE-LX/LH GE COM 550 m / 10 MMF / SMF Yes

km

GLC-ZX-SM 1000BASE-ZX GE COM 70 km SMF Yes

GLC-EX-SMD 1000BASE-EX GE COM 40 km SMF Yes

GLC-TE 1000BASE-T GE EXT 100 m Cat5e No

1
If non-industrial SFPs (EXT, COM) are used, the switch operating temperature must be derated.

Ordering Information
Table 15 lists the ordering information for fixed system, expansion modules and memory that are commonly used with
the Cisco Catalyst IE3300 switches.

Table 15. Ordering Information

Product ID detail Description

IE-3300-8T2S-E Cisco Catalyst IE3300 Rugged Series System, 8 non-PoE copper ports, 2 fiber SFPs,
Network Essentials

IE-3300-8P2S-E Cisco Catalyst IE3300 Rugged Series System, 8 PoE copper ports, 2 fiber SFPs, Network
Essentials

IEM-3300-8T= Cisco Catalyst IE3300 Rugged Series module, 8 non-PoE copper

IEM-3300-8P= Cisco Catalyst IE3300 Rugged Series module, 8 PoE copper

IEM-3300-8S= Cisco Catalyst IE3300 Rugged Series module, 8 SFP fiber

IEM-3300-16T= Cisco Catalyst IE3300 Rugged Series module, 16 non-PoE copper

IEM-3300-16P= Cisco Catalyst IE3300 Rugged Series module, 16 PoE copper

IEM-3300-6T2S= Cisco Catalyst IE3300 Rugged Series module, 6 non-PoE copper, 2 SFP fiber

IEM-3300-14T2S= Cisco Catalyst IE3300 Rugged Series module, 14 non-PoE copper, 2 SFP fiber

SD-IE-4GB= IE 4GB SD memory card for IE

STK-RACK-DINRAIL= 19” DIN Rail mount kit

© 2019 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 15 of 16
Warranty
Five-year limited HW warranty on all IE3300 PIDs and all IE Power Supplies (see table 9 above) See link below for more
details on warranty https://www.cisco.com/c/en/us/products/warranties/warranty-doc-c99-740591.html.

Cisco Services
https://www.cisco.com/web/services/

Cisco Capital
Flexible payment solutions to help you achieve your objectives
Cisco Capital makes it easier to get the right technology to achieve your objectives, enable business transformation
and help you stay competitive. We can help you reduce the total cost of ownership, conserve capital, and accelerate
growth. In more than 100 countries, our flexible payment solutions can help you acquire hardware, software, services and
complementary third-party equipment in easy, predictable payments. Learn more.

Printed in USAs C78-741759-00 02/19

© 2019 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 16 of 16