Basebands

Description Product code Image

Baseband 6630 KDV 127 621/11

Re-use baseband only to be

Baseband 5216 installed inside the RBS
6601
RPM 777 528/01000
Power cable for BB6630 RPM 777 528/05000
RPM 777 528/10000

RPM 777 567/01000

Grounding cable for BB6630
RPM 777 567/05000

IDL cable (SFP already RPM 777 417/00800

attached to the cable) RPM 777 417/01800
Electrical CPRI (Indoor) 10Gbps
SIGNAL CABLE (SFP already RPM 777 579/01000
attached to the cable)

Cable Ladder 19"

to be used in front of BB6630 or SXA 134 5524/3
for DIN rail

RBS 6601 subrack kit v2, -48V

DC-connector included in NTM 101 2589/1
package

DC power cable for RBS 6601

open end to open end TFL 901 17/18
- Length = 5000mm

Cable with connector/signal

cable (RBS 6601)
RJ45 to RJ45
RPM 777 01/00300
From EC X on RBS6601 to EC
baseband 5216
- Length = 300mm

Cable with connector/DC Power

cable (RBS 6601)
DC power cable, 2 pole - 2 pole,
2,5mm² RPM 777 193/00200
From PWR OUT 1 on RBS6601
to PWR on Baseband 5216
- Length = 200mm

Cable with connector/Earth

cable
Earth cable, Cable lug M8 - RPM 777 291/02000
Cable lug M8, 16mm², black
- Length = 2000mm
Dummy plate for RBS 6601 SXA 134 2193/2
Radio and Power

Description Product code Image

Radio 2238: B8, B20, B28

Connector: KRC 161 797/1
- RNT 447 37/01

Radio 2479: B8, B20, B28

Connector: KRC 161 832/1
- RNT 447 37/01

Radio 4480 B3, B7

Connector: KRC 161 813/1
- RNT 447 37/01

Fan kit for radio 4480 BKV 106 246/1

Air antenna 3278 B78K

Connector: KRD 901 266/11
- RNT 447 37/01

AIR Light Wall and Pole bracket

SXK 109 2016/1
with tilt and azimuth

AIR Medium, wall and pole

mount bracket with tilt and SXK 109 2065/1
azimuth

Circular power cable connector

DC power cable connector
going from: 2,5mm² to 16mm².
To be used for all radios! RNT 447 37/01 2‐wire connector
REMARK: when this connector
is being used, DC adapter is not
needed anymore!!
Installation material

Description Product code Image

Overvoltage arrester/OVP-ALM
NFD 302 34/08
8

Alarm cable RPM 777 143/00500

From OVP to SAU RPM 777 143/02000

SAU KIT, support for 32 alarms,

DIN rail and 1" rack installation,
10 m cable
- SAU: ZHY 601 19/1
NTB 101 242/1
- Signal and power cable: RPM
777 429/10000
- 19" DIN rail: NTM 503 019
- DIN holder: SXK 125 3083/1

Signal cable - RJ45 to open end RPM 919 727/05000

to be used as alarm cable RPM 919 727/15000

Support Alarm unit - SAU 02 01 ZHY 601 19/1

Signal and power cable RPM 777 429/00950

between SAU and baseband, RPM 777 429/01200
Micro USB - Special RJ45 RPM 777 429/10000

Support Control Unit - SCU 09

KDU 127 170/3
01

Power cable for SCU

RPM 777 554/01000
From SCU to breaker 6A

Power cable from SCU to SAU

RPM 777 405/00700
Micro-B USB to Micro-B USB

SHU holder
SCU and SAU holder for on SXK 109 1052/1
power rack
DIN holder
SCU and SAU holder for on a SXK 125 1457/1
DIN-rail

DIN rail mounting set (19") NTM 503 019

DC Power cable, 2-core cable

XSMK-HF THIN TFL 492 324/0 (2 x 6mm²)
2 x 6mm² TFL 492 325/0 (2 x 10mm²)
2 x 10mm² TFL 492 326/0 (2 x 16mm²)
2 x 16mm² TFL 492 327/0 (2 x 25mm²)
2 x 25mm² 85096005 (2 x 35mm²)
2 x 35mm²
DC Power cable, 6-core cable
XSMK-HF THIN TFL 492 112/0 (6 x 10mm²)
6 x 10mm² TFL 492 113/0 (6 x 16mm²)
6 x 16mm² 85160225 (6 x 25mm²)
6 x 25mm²

PTTA-Box (240*240*132) for up

to 3pcs of ERS, cable diam 13- 85021475
32mm

Cluster junction Multipower 1-3

2,5-16mm² 6996633
Nordic version

Cluster junction Multipower 1-1

6-35mm² 6996635
Nordic version

DC Power Junction box NTB 101 75/1

RPM 253 1610/1000

RPM 253 1610/2000
RPM 253 1610/3000
RPM 253 1610/5000
RPM 253 1610/10m Only in case
RPM 253 1610/20m when length is
Optical fiber cable, single mode,
RPM 253 1610/30m shorter than 10m
LCD - LCD, FullAXS
RPM 253 1610/50m or when only 1 is
RPM 253 1610/70m needed
RPM 253 1610/100m
RPM 253 1610/150m
RPM 253 1610/200m
RPM 253 1610/300m

RPM 253 1641/30m

Multifiber cable, single mode RPM 253 1641/50m
Standard 3 pair
6 fiber, 3LCD - 3LCDFullAxs RPM 253 1641/70m
RPM 253 1641/100m
 RPM 253 1642/30m
Multifiber cable, single mode RPM 253 1642/50m
Standard 6 pair
12 fiber, 6LCD - 6LCDFullAxs RPM 253 1642/70m
RPM 253 1642/100m

RPM 253 1643/30m

Multifiber cable, single mode RPM 253 1643/50m
Standard 9 pair
18 fiber, 9LCD - 9LCDFullAxs RPM 253 1643/70m
RPM 253 1643/100m

85005467 (20m)
85005468 (30m)
85005469 (40m)
85005470 (50m) Only in case
Multifiber cable, single mode 85005471 (60m) when "jumper
12 fiber, 6LC - 6Q-ODC 85005472 (70m) length" is more
85005473 (80m) than 4m
85005474 (90m)
85005475 (100m)
85005478 (125m)
85005609 (20m)
85005610 (30m)
85005611 (40m)
Only in case
85005612 (50m)
Multifiber cable, single mode when "jumper
85005613 (60m)
24 fiber, 12LC - 12Q-ODC length" is more
85005614 (70m)
85005615 (80m)
than 4m
85005616 (90m)
85005617 (100m)
85006042 (2m)
85006043 (5m)
Jumper fibre cable, single mode
85006044 (10m)
Q-ODC - FullAxs
85017986 (30m)
85016605 (50m)

Cable winder box (over length

NTM 201 3729/1
box)

SFP CPRI & 1000BASE-LX 125-

RDH 102 47/2
248

SFP+ MM 10.3Gb/s 1.4km

RDH 102 65/1 Multi Mode SFP
1310NM -40/+85C 3.3V

SFP+ SM 10.3Gb/s 1.4km

RDH 102 65/2
1310nm -40/+85C 3.3V

SFP+ CIPRI& 10GBase-LR

RDH 102 65/3
10km 1310nm -40/+85C
Single ERS Steel Bracket,
SXK 109 2006/1
pole/wall

Dual ERS bracket SXK 109 1973/2

Multi ERS bracket SXK 109 1973/5

Steel Mounting Kit SXK 125 2540/2

SEF 901 305/0180

SEF 901 305/0300
Rail SEF 901 305/0450
SEF 901 305/0580
SEF 901 305/1100

Rail Bracket:
SEF 901 304/1 (small)
Small radios
SEF 901 304/3 (large)
Large radios (2479, 4480)

ERS cable ladder support

SXK 107 2867/1
300 - 500mm cable ladder

ERS adapter plate SXK 107 2892/1

Optical fiber cable, single mode,

RPM 253 3512/1000
LCD - LCD
RPM 253 3512/5000
Optical transmission cable
RPM 253 3512/10m
(incoming tranmssion point
RPM 253 3512/20m
towards baseband)

16mm2, Black, 2m, 1 lug with 2 RPM 119 2062/2

M6 holes, angle 90 RPM 119 2062/5

INH8017836 (BNJ50562): 1m
INH8017837 (BNJ50563): 1,5m
BNJ50546: 2m
Spinner 1/2" jumper cable, 4.3-
BNJ50564: 3m
10(m)-4.3-10(m)
INH8017839 (BNJI0064): 4m
INH8017840 (BNJI0019): 5m
INH8017888 (BNJI0150): 10m
 INH8017884 (BNJ50525): 1m
INH8017885 (BNJ50519): 1,5m
INH8017841 (BNJ50583): 2m
Spinner 1/2" jumper cable, 4.3-
INH8017842 (BNJ50580): 3m
10(m)-7/16(m)
INH8017844 (BNJI0026): 4m
INH8017886 (BNJI0010): 5m
INH8017887 (BNJI0040): 10m

Rosenberger, 4.3-10(m) - 7-
RPT 899 394/1
16(f) adapter

Rosenberger, 4.3-10(f) - 7-
RPT 899 395/1
16(m) adapter

Mounting set/rack screw kit SXK 111 539/1

Antenna system

Description Product code Image

1/TSR 484 21/1000
1/TSR 484 21/2000
RET Control Cable (3GPP / 1/TSR 484 21/3000
AISG), black 1/TSR 484 21/5000
1/TSR 484 21/10m
1/TSR 484 21/15m

RIU 4.3-10 Int cables KRC 115 032/6

RMU 4.3-10 Int Cables KRC 115 108/1

Dual-band Ant: (M+H)

Kathrein 80010682
2 x External RET
Mounting hardware
855x315x71 80010682 7‐16 connectors
"M"
Mounting brackets included
Tlit bracket 737978 not
included Ant: (M+H)
Dual-band
Kathrein 80020622
2 x External RET
Mounting hardware
1471x275x86 80020622 4.3‐10 connectors
"M"
Mounting brackets included
Tlit bracket 737978 not
included
Dual-band Ant: (L+L)
Kathrein 80010901
Internal FlexRET
Mounting hardware
1999x508x175 80010901 4.3‐10 connectors
"XM"
Mounting brackets included
Tlit bracket 85010110 not
included
Dual-band Ant: (L+L)
Kathrein 80010902
Internal FlexRET
Mounting hardware
2438x508x175 80010902 4.3‐10 connectors
"XH"
Mounting brackets included
Tlit bracket 85010099 not
included
Quad-band Ant: (L+L+M+H)
Kathrein 80010964
Internal FlexRET
Mounting hardware
1499x508x175 80010964 4.3‐10 connectors
"XM"
Mounting brackets included
Tlit bracket 85010110 not
included
Quad-band Ant: (L+L+M+H)
Kathrein 80010965
Internal FlexRET
Mounting hardware
1999x508x175 80010965 4.3‐10 connectors
"XM"
Mounting brackets included
Tlit bracket 85010110 not
included
Quad-band Ant: (L+L+M+H)
Kathrein 80010966
Internal FlexRET
Mounting hardware
24389x508x175 80010966 4.3‐10 connectors
"XH"
Mounting brackets included
Tlit bracket 85010099 not
included
Kathrein 3GPP/AISG 2.0 RET
86010148v01
Unit

Down Tilt Kit without Scale

Wind load category "L" and "M" 737978
Kathrein antenna

Down Tilt Kit without Scale

Wind load category "XM" 85010110
Kathrein antenna

Down Tilt Kit without Scale

Wind load category "XH" 85010099
Kathrein antenna

Dual-band Ant: (M+H)

Cellmax - 120105
2 x External RET included
120105 4.3‐10 connectors
929x291x135
Tilt bracket and mounting
brackets included
Dual-band Ant: (M+H)
Cellmax - 120115
2 x External RET included
120115 4.3‐10 connectors
1385x291x135
Tilt bracket and mounting
brackets included
Dual-band Ant: (M+H)
Cellmax - 120125
2 x External RET included
120125 4.3‐10 connectors
1841x291x135
Tilt bracket and mounting
brackets included

Cellmax - RET INH8017113 (110086)

Cellmax - Downtilt kit INH8013850 (110096)

Mafi bracket 3117

Mafi bracket 3119

GPS equipment

Description Product code Image

Robust GNSS active antenna KRE 101 2395/1

CueDee bracket for mast/tower INH 801 7715 (CD991463)

CueDee angle bracket for

INH 801 7716 (CD991467)
shelter

GPS 04 01; GPS Receiver Unit NCD 901 65/1

Signal Cable, Ethernet cable

RPM 113 6127/2000
Straight, RJ45 - RJ45
RPM 113 6127/5000
- Length 2000mm or 5000mm

GPS RF jumper N(f)-SMA(m)

TSR 951 339/1500
- Length = 1500mm

Sealing Set, Feeder Connectors NTM 201 2426

Earthing cable, 16mm2, black RPM 119 1647/2

- Length = 2000mm or 5000mm RPM 119 1647/5

1/2" Feeder cable FAB 102 1044/01

1/2" N-Connector (m) RPT 899 024/1

1/2" grounding kit, Alu and Cu

NGT 901 29/1
cables, tape sealing

2 x 1/2" Feeder Clamp NTM 201 1223/2

Power system

Description Product code Image

Delta system 3M, 19" type INH8017816 (3798102792-S)

Delta system 5M, 19" type, PDU

3798102789
included

Delta system 6M, 1800mm rack

3798102790
with space for 3 battery strings

Delta PDU, Sytem 9M, 19" type INH8017817 (3798102791-S)

Delta rectifier 3kW (DPR2900B) ESR-48/56BFC-A

Delta mains cable 3-Phase,

CEE3 INH8017834 (D0108016)
- Length 6m

Eltek system 3, 19" type CTE30806.4035

Eltek system 5, 19" type with
CTE30810.4002
PDU included

Eltek system 6M, 1800mm rack INH8018048

with space for 3 battery strings (CTE30838.4012)

Eltek rectifier, 2kW 241115105

Eltek mains cable 3-Phase,

CEE3 INH8018049 (364E10101400)
- Length 3m

Surface socket outlet, 6h, 16A,

2CMA193115R1000
IP44, 3P+N+E

AC Power cable: EQLQ Filled

Pure 5G2,5mm² R50 20118694
- Length 10m

MCB, 16A for AC, Schneider A9F04116 (2112043)

Elicom PDU, 5U, 19" type P152111509R1E

Battery: Powersafe (Enersys) Interconnection kit
BKC 901 06/144
12V100FC (4x12V) 100Ah included

Battery: Enersys, SBS190F Interconnection kit

BKC 901 06/123
(4x12V) 190Ah not included

Battery interconnection kit for

BKY 901 51/4
SBS Powersafe batteries

Battery: Powersafe (Enersys) Interconnection kit

BKC 901 06/145
12V190FS (4x12V) 190Ah included

CABLE WITH
RPM 777 573/01900
CONNECTOR/BATTERY
RPM 777 573/02800
CABLE

Battery 6313 BKB 902 90/2

RPM 777 038/00450

Battery cable for battery 6313
RPM 777 038/01500
Antenna system

Description Product code Image

MI-17366
700/800/900 TMA
Bracket included MI-17336 (INH8018097) 4.3‐10 connectors
Hose clamps included, pole
diameter = 10-140mm

GSM-R Reject filter: Ericsson

Can be mounted on all ERS
brackets (30mm) KRF 102 433/4 4.3‐10 connectors
Mounting plate = optional

Mounting plate optional with

SXA 216 1661/1
KRF 102 433/4

GSM-R Band -Stop Filter

Wall/mast mounting kit not
BN610015 4.3‐10 connectors
included

Wall/mast mounting kit

to be ordered together with BNB-07787
BN610015

DTMA 1800/2600 78211912v02 4.3‐10 connectors