0% found this document useful (0 votes)
11 views14 pages

Grundfosliterature 3294

The Grundfos SPK installation and operating instructions provide essential guidelines for safely unpacking, installing, and starting up SPK pumps, as well as information on servicing, fault finding, and disposal. The document includes warnings and cautions regarding electrical safety, moving parts, and handling hazardous liquids, emphasizing the importance of following local regulations. Additionally, it outlines the technical specifications and maintenance requirements for the pumps to ensure optimal performance.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
11 views14 pages

Grundfosliterature 3294

The Grundfos SPK installation and operating instructions provide essential guidelines for safely unpacking, installing, and starting up SPK pumps, as well as information on servicing, fault finding, and disposal. The document includes warnings and cautions regarding electrical safety, moving parts, and handling hazardous liquids, emphasizing the importance of following local regulations. Additionally, it outlines the technical specifications and maintenance requirements for the pumps to ensure optimal performance.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 14

GRUNDFOS INSTRUCTIONS

SPK
Installation and operating instructions
English (GB) Installation and operating instructions
English (GB)

Original installation and operating instructions


WARNING
These installation and operating instructions
describe Grundfos SPK pumps. Indicates a hazardous situation which, if
Sections 1-3 give the information necessary to be not avoided, could result in death or
able to unpack, install and start up the product in a serious personal injury.
safe way.
CAUTION
Sections 4-9 give important information about the
product, as well as information on service, fault Indicates a hazardous situation which, if
finding and disposal of the product. not avoided, could result in minor or
moderate personal injury.
CONTENTS The hazard statements are structured in the
Page following way:

1. General information 2 SIGNAL WORD


1.1 Hazard statements 2 Description of hazard
1.2 Notes 2 Consequence of ignoring the warning.
2. Installing the product 3 - Action to avoid the hazard.
2.1 Mechanical installation 3
2.2 Electrical connection 4 1.2 Notes
3. Starting up the product 4 The symbols and notes below may appear in
Grundfos installation and operating instructions,
4. Product introduction 5 safety instructions and service instructions.
4.1 Applications 5
4.2 Identification 5
Observe these instructions for explosion-
4.3 Pump key 5 proof products.
5. Servicing the product 5
5.1 Maintaining the product 5
5.2 Contaminated products 6 A blue or grey circle with a white graphical
symbol indicates that an action must be
6. Taking the product out of operation 6 taken.
6.1 Taking the product permanently out of
operation 6
A red or grey circle with a diagonal bar,
7. Technical data 6 possibly with a black graphical symbol,
7.1 Sound pressure level 6 indicates that an action must not be taken
8. Fault finding the product 7 or must be stopped.

9. Disposing of the product 8


If these instructions are not observed, it
may result in malfunction or damage to the
Read this document before installing the equipment.
product. Installation and operation must
comply with local regulations and accepted
codes of good practice. Tips and advice that make the work easier.

1. General information
1.1 Hazard statements
The symbols and hazard statements below may
appear in Grundfos installation and operating
instructions, safety instructions and service
instructions.

DANGER
Indicates a hazardous situation which, if
not avoided, will result in death or serious
personal injury.

2
2. Installing the product 2.1.2 Inlet conditions
The bottom of the pump strainer must be at least 25

English (GB)
2.1 Mechanical installation mm above the bottom of the tank.
The pumps are designed to provide full performance
WARNING down to a level of A mm above the bottom of the
Moving parts strainer.
Death or serious personal injury At a liquid level between A and B mm above the
- Tighten the coupling screws to the bottom of the strainer, the built-in priming screw will
correct torque. protect the pump against dry running.
- Install the coupling guards securely to
the pump with the screws intended for Pump type A [mm] B [mm]
this purpose.
SPK 40 25
CAUTION
Hot surface
Minor or moderate personal injury
- The pump must be installed so that
persons cannot accidentally come into
contact with the hot surface of the
motor.

2.1.1 Pump location

TM07 2804 4118


The pump is designed for tank mounting in vertical A
position. The pump is positioned in a hole cut into B
the cover of the tank (upper side) and is secured to
the tank by four hexagon head screws through the 25 mm
holes in the mounting flange. We recommend to fit a
sealing gasket between the pump flange and tank.
If the pump is to be installed horizontally, the drain Fig. 2
hole of the motor stool must be fitted with a plug.

4xX

L
TM00 4375 5298

D1
D2
D3

Fig. 1

Pump mounting flange dimensions:

Pump
D1 D2 D3 L C X
type

SPK 1,
100 115 130 64 Rp 3/4 ∅7.5
2 and 4
SPK 8 140 160 180 100 Rp 1 1/4 ∅7.5

3
2.2 Electrical connection 3. Starting up the product
English (GB)

WARNING WARNING
Electric shock Too high pressure and leakage
Death or serious personal injury Death or serious personal injury
- Before starting any work on the product, - Do not run the pump against a closed
make sure that the power supply has outlet valve for more than approx. 5
been switched off and that it cannot be minutes.
accidentally switched on.
- Connect the pump to an external main Before starting the pump, make sure:
switch close to the pump and to a • that all pipe connections are tight.
motor-protective circuit breaker or a • that the pump body is partly filled with liquid
CUE frequency converter. Make sure (partly submerged).
you can lock the main switch in OFF
• that the strainer is not blocked by impurities.
position (isolated). Type and
requirements as specified in EN 60204- Start the pump as follows:
1, 5.3.2. 1. Close the isolating valve on the outlet side of the
The operating voltage and frequency are marked on pump.
the pump nameplate. Please make sure that the 2. If the pump is fitted with a vent valve, this valve
motor is suitable for the power supply on which it will must be opened, see fig. 4.
be used.
Single-phase Grundfos motors incorporate a thermal
overload switch and require no additional motor
protection.
Three-phase motors must be connected to a motor
starter.
The terminal box can be turned to four positions, in

TM01 6428 2399


90 ° steps, see fig. 3.
Proceed as follows:
1. Remove the coupling guards. Do not remove the
coupling. Vent valve
2. Remove the four bolts securing the motor to the
motor stool. Fig. 4
3. Turn the motor to the required position.
3. See the correct direction of rotation of the pump
4. Replace and tighten the four bolts. on the motor fan cover. When seen from the top,
5. Replace the coupling guards. the pump must rotate counterclockwise.
The electric motor must be connected to the supply 4. Start the pump and check the direction of
as shown in the diagram inside the terminal box rotation.
cover. 5. Open the outlet isolating valve a little.
0˚ 6. If the pump is fitted with a vent valve, this valve
must be closed when a steady stream of liquid
runs out of it.
7. Completely open the outlet isolating valve.
TM00 4257 2294

270˚ 90˚ The pump has now been vented and is ready for
operation.

180˚

Fig. 3

4
4. Product introduction 5. Servicing the product

English (GB)
4.1 Applications WARNING
The Grundfos pumps, type SPK, are multistage Electric shock
centrifugal pumps designed for pumping liquids for Death or serious personal injury
machine tools, condensate transfer, liquid transfer in - Before starting any work on the product,
industrial washing machines and similar make sure that the power supply has
applications. been switched off and that it cannot be
accidentally switched on.
WARNING
Fire and explosion WARNING
Death or serious personal injury Moving parts
- Do not use the pump for flammable, Death or serious personal injury
combustible or explosive liquids. - Tighten the coupling screws to the
The pumps are designed for pumping liquids with a correct torque.
density and viscosity corresponding to those of - Install the coupling guards securely to
water. The pumped liquid must not contain abrasive the pump with the screws intended for
particles or fibres. this purpose.
When pumping liquids with a density or viscosity
higher than that of water, the motor size must be CAUTION
taken into consideration. Corrosive liquids
Death or serious personal injury
4.2 Identification - Wear personal protective equipment.
The standard range of pumps encompasses
complete impeller-in-chamber combinations. CAUTION
Depending on duty combinations, other lengths can Toxic liquids
on request be supplied by fitting empty intermediate
Death or serious personal injury
chambers instead of standard chambers with
- Wear personal protective equipment.
impellers.
The pump key on the pump nameplate indicates the
number of chambers and impellers fitted to the
pump. CAUTION
Hot or cold liquid
4.3 Pump key Minor or moderate personal injury
- Wear personal protective equipment.
Example SPK 4 - 16 / 2 -x -x -x -xxxx

Pump range
Nominal flow rate in m 3/h
CAUTION
Hot or cold surface
Number of stages
Minor or moderate personal injury
Number of impellers - Make sure that no one can accidentally
Code for pump version come into contact with hot or cold
surfaces.
Code for pipe connection
Code for materials 5.1 Maintaining the product
Code for shaft seal and rubber pump parts Pumps installed in accordance with these
instructions require very little maintenance.
The mechanical shaft seal is self-adjusting and has
wear-resistant seal rings which are lubricated and
cooled by the pumped liquid.
The pump bearings are also lubricated by the
pumped liquid. The motor ball bearings are grease
packed and sealed for life. No further lubrication is
necessary.
Pumps from 4 kW and up have angular contact
bearings.

5
5.1.1 Filters
Chip trays, filters, etc. must be cleaned at regular CAUTION
English (GB)

intervals to ensure a correct flow of liquid. Hot or cold surface


5.1.2 Periodic checks Minor or moderate personal injury
- Make sure that no one can accidentally
At regular intervals, depending on the conditions and
come into contact with hot or cold
time of operation, the following checks should be
surfaces.
made:
• Check the quantity of liquid and operating
pressure. 7. Technical data
• Check that there are no leaks.
• Check that the motor is not overheating. Pump type SPK
• Check the tripping of the motor starter. Minimum liquid temperature [°C] -10
• Check that all controls are operating
satisfactorily. Maximum liquid temperature [°C] +90
If the above checks do not reveal any abnormal Maximum ambient temperature [°C] +40
operating details, no further checks are necessary. Maximum operating pressure [bar] 10
Should any faults be found, check the symptoms with
section 8. Fault finding the product. Enclosure class IP54

5.2 Contaminated products 7.1 Sound pressure level


The product will be classified as contaminated if it
has been used for a liquid which is injurious to health LpA [dB(A)]
Motor
or toxic. [kW]
50 Hz 60 Hz
If you request Grundfos to service the product,
contact Grundfos with details about the liquid before 0.06 < 70 < 70
returning the product for service. Otherwise,
Grundfos can refuse to accept the product for 0.12 < 70 < 70
service. 0.18 < 70 < 70
Any application for service must include details
0.25 < 70 < 70
about the liquid.
Clean the product in the best possible way before 0.37 < 70 < 70
you return it. 0.55 < 70 < 70
Costs of returning the product are to be paid by the
0.75 < 70 < 70
customer.
1.1 < 70 < 70
6. Taking the product out of operation 1.5 < 70 71
2.2 < 70 71
6.1 Taking the product permanently out of
operation

CAUTION
Corrosive liquids
Death or serious personal injury
- Wear personal protective equipment.

CAUTION
Toxic liquids
Death or serious personal injury
- Wear personal protective equipment.

CAUTION
Hot or cold liquid
Minor or moderate personal injury
- Wear personal protective equipment.

6
8. Fault finding the product CAUTION

English (GB)
WARNING Toxic liquids
Death or serious personal injury
Electric shock
- Wear personal protective equipment.
Death or serious personal injury
- Before starting any work on the product,
make sure that the power supply has
been switched off and that it cannot be CAUTION
accidentally switched on. Hot or cold liquid
Minor or moderate personal injury
WARNING - Wear personal protective equipment.
Moving parts
Death or serious personal injury
- Tighten the coupling screws to the
correct torque.
CAUTION
- Install the coupling guards securely to Hot or cold surface
the pump with the screws intended for Minor or moderate personal injury
this purpose. - Make sure that no one can accidentally
come into contact with hot or cold
CAUTION surfaces.
Corrosive liquids
Death or serious personal injury
- Wear personal protective equipment.

Fault Cause Remedy

1. Motor does not a) Supply failure. Connect the power supply.


run when started.
b) Fuses are blown. Replace fuses.
c) Motor starter overload has tripped. Reactivate the motor protection.
d) Main contacts in motor starter are not
Replace contacts or magnetic coil.
making contact or the coil is faulty.
e) Control circuit is defective. Repair the control circuit.
f) Motor is defective. Replace the motor.
2. Motor starter a) One fuse/automatic circuit breaker is
Cut in the fuse.
overload trips out blown.
immediately when
b) Contacts in motor starter overload are
supply is switched Replace motor starter contacts.
faulty.
on.
c) Cable connection is loose or faulty. Fasten or replace the cable
connection.
d) Motor winding is defective. Replace the motor.
e) Pump mechanically blocked. Remove the mechanical blocking of
the pump.
f) Overload setting is too low. Set the motor starter correctly.
3. Motor starter a) Overload setting is too low. Set the motor starter correctly.
overload trips out
b) Low voltage at peak times. Check the power supply.
occasionally.
4. Motor starter has a) Check 1 a), b), d) and e).
not tripped but the
pump does not
run.
5. Pump runs but a) Pump strainer partly blocked by
Clean the strainer.
gives no liquid or impurities.
pump capacity is
b) Liquid level in tank too low. Increase the liquid level.
not constant.
c) Pump rotates in the wrong direction. Change the direction of rotation of the
motor.

7
9. Disposing of the product
English (GB)

Disposal of this product must be carried out


according to the following guidelines:
1. Use the local public or private waste collection
service.
2. In case such waste collection service does not
exist or cannot handle the materials used in the
product, please deliver the product or any
hazardous materials from it to your nearest
Grundfos company or service workshop.

8
Declaration of conformity 1

Declaration of conformity
GB: EU declaration of conformity CZ: Prohlášení o shodě EU
We, Grundfos, declare under our sole responsibility that the product My firma Grundfos prohlašujeme na svou plnou odpovědnost, že
SPK, to which the declaration below relates, is in conformity with the výrobek SPK, na který se toto prohlášení vztahuje, je v souladu s níže
Council Directives listed below on the approximation of the laws of the uvedenými ustanoveními směrnice Rady pro sblížení právních
EU member states. předpisů členských států Evropského společenství.

DE: EU-Konformitätserklärung DK: EU-overensstemmelseserklæring


Wir, Grundfos, erklären in alleiniger Verantwortung, dass das Produkt Vi, Grundfos, erklærer under ansvar at produktet SPK som
SPK, auf das sich diese Erklärung bezieht, mit den folgenden erklæringen nedenfor omhandler, er i overensstemmelse med Rådets
Richtlinien des Rates zur Angleichung der Rechtsvorschriften der direktiver der er nævnt nedenfor, om indbyrdes tilnærmelse til
EU-Mitgliedsstaaten übereinstimmt. EU-medlemsstaternes lovgivning.

ES: Declaración de conformidad de la UE FI: EU-vaatimustenmukaisuusvakuutus


Grundfos declara, bajo su exclusiva responsabilidad, que el producto Grundfos vakuuttaa omalla vastuullaan, että tuote SPK, jota tämä
SPK al que hace referencia la siguiente declaración cumple lo vakuutus koskee, on EU:n jäsenvaltioiden lainsäädännön
establecido por las siguientes Directivas del Consejo sobre la lähentämiseen tähtäävien Euroopan neuvoston direktiivien
aproximación de las legislaciones de los Estados miembros de la UE. vaatimusten mukainen seuraavasti.

FR: Déclaration de conformité UE GR: Δήλωση συμμόρφωσης ΕΕ


Nous, Grundfos, déclarons sous notre seule responsabilité, que le Εμείς, η Grundfos, δηλώνουμε με αποκλειστικά δική μας ευθύνη ότι το
produit SPK, auquel se réfère cette déclaration, est conforme aux προϊόν SPK, στο οποίο αναφέρεται η παρακάτω δήλωση,
Directives du Conseil concernant le rapprochement des législations συμμορφώνεται με τις παρακάτω Οδηγίες του Συμβουλίου περί
des États membres UE relatives aux normes énoncées ci-dessous. προσέγγισης των νομοθεσιών των κρατών μελών της ΕΕ.

IT: Dichiarazione di conformità UE NL: EU-conformiteitsverklaring


Grundfos dichiara sotto la sua esclusiva responsabilità che il prodotto Wij, Grundfos, verklaren geheel onder eigen verantwoordelijkheid dat
SPK, al quale si riferisce questa dichiarazione, è conforme alle product SPK, waarop de onderstaande verklaring betrekking heeft, in
seguenti direttive del Consiglio riguardanti il riavvicinamento delle overeenstemming is met de onderstaande Richtlijnen van de Raad
legislazioni degli Stati membri UE. inzake de onderlinge aanpassing van de wetgeving van de
EU-lidstaten.

PL: Deklaracja zgodności UE PT: Declaração de conformidade UE


My, Grundfos, oświadczamy z pełną odpowiedzialnością, że nasz A Grundfos declara sob sua única responsabilidade que o produto
produkt SPK, którego deklaracja niniejsza dotyczy, jest zgodny SPK, ao qual diz respeito a declaração abaixo, está em conformidade
z następującymi dyrektywami Rady w sprawie zbliżenia przepisów com as Directivas do Conselho sobre a aproximação das legislações
prawnych państw członkowskich. dos Estados Membros da UE.

RU: Декларация о соответствии нормам ЕС SE: EU-försäkran om överensstämmelse


Мы, компания Grundfos, со всей ответственностью заявляем, что Vi, Grundfos, försäkrar under ansvar att produkten SPK, som
изделие SPK, к которому относится нижеприведённая omfattas av nedanstående försäkran, är i överensstämmelse med de
декларация, соответствует нижеприведённым Директивам rådsdirektiv om inbördes närmande till EU-medlemsstaternas
Совета Евросоюза о тождественности законов стран-членов ЕС. lagstiftning som listas nedan.
– Machinery Directive (2006/42/EC).
Standard used: EN 809:1998, A1:2009.

– Ecodesign Directive (2009/125/EC).


Electric motors:
Commission Regulation No 640/2009.
Applies only to three-phase Grundfos motors marked IE2 or IE3.
See motor nameplate.
Standard used: EN 60034-30:2009.

– Ecodesign Directive (2009/125/EC).


Water pumps:
Commission Regulation No 547/2012.
Applies only to water pumps marked with the minimum efficiency
index MEI. See pump nameplate.

– RoHS Directives: (2011/65/EU and 2015/863/EU)


Standard used: EN IEC 63000:2018

This EC/EU declaration of conformity is only valid when published as


part of the Grundfos installation and operating instructions
(96496967).

Bjerringbro, 5th of January 2021

Erik Andersen
Senior Manager
GRUNDFOS Holding A/S
Poul Due Jensens Vej 7
8850 Bjerringbro, Denmark

Manufacturer and person empowered to sign the EC/EU declaration


of conformity.

9
Declaration of conformity 2
Declaration of conformity

UK declaration of conformity

We, Grundfos, declare under our sole responsibility that the product SPK, to which this declaration relates, is
in conformity with UK regulations, standards and specifications to which conformity is declared, as listed below:

– Supply of Machinery (Safety) Regulations 2008


Standard used: EN 809:1998, A1:2009.

– The Ecodesign for Energy-Related Products and Energy Information Regulations 2019
Electric motors:
Regulation (EC) No 640/2009 and Regulation (EU) No 4/2014
Applies only to three-phase Grundfos motors marked IE2 or IE3.
See motor nameplate.
Standard used: EN 60034-30-1:2009.

– The Ecodesign for Energy-Related Products and Energy Information Regulations 2019
Water pumps:
Regulation (EU) No 547/2012.
Applies only to water pumps marked with the minimum efficiency index MEI. See pump nameplate.

– The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment
Regulations 2019
Standard used: EN IEC 63000:2018

This UK declaration of conformity is only valid when published as part of the Grundfos installation and operating
instructions.

UK Importer: Grundfos Pumps ltd. Grovebury Road, Leighton Buzzard, LU7 4TL.

Bjerringbro, January 1, 2021

Erik Andersen
Senior Manager
Grundfos Holding A/S
Poul Due Jensens Vej 7
8850 Bjerringbro, Denmark

Manufacturer and person empowered to sign the UK declaration of conformity.

10000335766

10
11
Argentina China Hong Kong
Grundfos companies

Bombas GRUNDFOS de Argentina S.A. GRUNDFOS Pumps (Shanghai) Co. Ltd. GRUNDFOS Pumps (Hong Kong) Ltd.
Ruta Panamericana km. 37.500 Centro 10F The Hub, No. 33 Suhong Road Unit 1, Ground floor
Industrial Garin Minhang District Siu Wai Industrial Centre
1619 Garín Pcia. de B.A. Shanghai 201106 29-33 Wing Hong Street &
Phone: +54-3327 414 444 PRC 68 King Lam Street, Cheung Sha Wan
Telefax: +54-3327 45 3190 Phone: +86 21 612 252 22 Kowloon
Telefax: +86 21 612 253 33 Phone: +852-27861706 / 27861741
Australia Telefax: +852-27858664
GRUNDFOS Pumps Pty. Ltd. COLOMBIA
P.O. Box 2040 GRUNDFOS Colombia S.A.S. Hungary
Regency Park Km 1.5 vía Siberia-Cota Conj. Potrero GRUNDFOS Hungária Kft.
South Australia 5942 Chico, Tópark u. 8
Phone: +61-8-8461-4611 Parque Empresarial Arcos de Cota Bod. H-2045 Törökbálint,
Telefax: +61-8-8340 0155 1A. Phone: +36-23 511 110
Cota, Cundinamarca Telefax: +36-23 511 111
Austria Phone: +57(1)-2913444
GRUNDFOS Pumpen Vertrieb Telefax: +57(1)-8764586 India
Ges.m.b.H. GRUNDFOS Pumps India Private
Grundfosstraße 2 Croatia Limited
A-5082 Grödig/Salzburg GRUNDFOS CROATIA d.o.o. 118 Old Mahabalipuram Road
Tel.: +43-6246-883-0 Buzinski prilaz 38, Buzin Thoraipakkam
Telefax: +43-6246-883-30 HR-10010 Zagreb Chennai 600 096
Phone: +385 1 6595 400 Phone: +91-44 2496 6800
Belgium Telefax: +385 1 6595 499
N.V. GRUNDFOS Bellux S.A. www.hr.grundfos.com Indonesia
Boomsesteenweg 81-83 PT. GRUNDFOS POMPA
B-2630 Aartselaar GRUNDFOS Sales Czechia and Graha Intirub Lt. 2 & 3
Tél.: +32-3-870 7300 Slovakia s.r.o. Jln. Cililitan Besar No.454. Makasar,
Télécopie: +32-3-870 7301 Čajkovského 21 Jakarta Timur
779 00 Olomouc ID-Jakarta 13650
Belarus Phone: +420-585-716 111 Phone: +62 21-469-51900
Представительство ГРУНДФОС в Telefax: +62 21-460 6910 / 460 6901
Минске Denmark
220125, Минск GRUNDFOS DK A/S Ireland
ул. Шафарнянская, 11, оф. 56, БЦ Martin Bachs Vej 3 GRUNDFOS (Ireland) Ltd.
«Порт» DK-8850 Bjerringbro Unit A, Merrywell Business Park
Тел.: +375 17 397 397 3 Tlf.: +45-87 50 50 50 Ballymount Road Lower
+375 17 397 397 4 Telefax: +45-87 50 51 51 Dublin 12
Факс: +375 17 397 397 1 E-mail: [email protected] Phone: +353-1-4089 800
E-mail: [email protected] www.grundfos.com/DK Telefax: +353-1-4089 830
Bosnia and Herzegovina Estonia Italy
GRUNDFOS Sarajevo GRUNDFOS Pumps Eesti OÜ GRUNDFOS Pompe Italia S.r.l.
Zmaja od Bosne 7-7A, Peterburi tee 92G Via Gran Sasso 4
BH-71000 Sarajevo 11415 Tallinn I-20060 Truccazzano (Milano)
Phone: +387 33 592 480 Tel: + 372 606 1690 Tel.: +39-02-95838112
Telefax: +387 33 590 465 Fax: + 372 606 1691 Telefax: +39-02-95309290 / 95838461
www.ba.grundfos.com
e-mail: [email protected] Finland Japan
OY GRUNDFOS Pumput AB GRUNDFOS Pumps K.K.
Brazil Trukkikuja 1 1-2-3, Shin-Miyakoda, Kita-ku,
BOMBAS GRUNDFOS DO BRASIL FI-01360 Vantaa Hamamatsu
Av. Humberto de Alencar Castelo Phone: +358-(0) 207 889 500 431-2103 Japan
Branco, 630 Phone: +81 53 428 4760
CEP 09850 - 300 France Telefax: +81 53 428 5005
São Bernardo do Campo - SP Pompes GRUNDFOS Distribution S.A.
Phone: +55-11 4393 5533 Parc d’Activités de Chesnes Korea
Telefax: +55-11 4343 5015 57, rue de Malacombe GRUNDFOS Pumps Korea Ltd.
F-38290 St. Quentin Fallavier (Lyon) 6th Floor, Aju Building 679-5
Bulgaria Tél.: +33-4 74 82 15 15 Yeoksam-dong, Kangnam-ku, 135-916
Grundfos Bulgaria EOOD Télécopie: +33-4 74 94 10 51 Seoul, Korea
Slatina District Phone: +82-2-5317 600
Iztochna Tangenta street no. 100 Germany Telefax: +82-2-5633 725
BG - 1592 Sofia GRUNDFOS GMBH
Tel. +359 2 49 22 200 Schlüterstr. 33 Latvia
Fax. +359 2 49 22 201 40699 Erkrath SIA GRUNDFOS Pumps Latvia
email: [email protected] Tel.: +49-(0) 211 929 69-0 Deglava biznesa centrs
Telefax: +49-(0) 211 929 69-3799 Augusta Deglava ielā 60, LV-1035, Rīga,
Canada e-mail: [email protected] Tālr.: + 371 714 9640, 7 149 641
GRUNDFOS Canada Inc. Service in Deutschland: Fakss: + 371 914 9646
2941 Brighton Road e-mail: [email protected]
Oakville, Ontario Lithuania
L6H 6C9 Greece GRUNDFOS Pumps UAB
Phone: +1-905 829 9533 GRUNDFOS Hellas A.E.B.E. Smolensko g. 6
Telefax: +1-905 829 9512 20th km. Athinon-Markopoulou Av. LT-03201 Vilnius
P.O. Box 71 Tel: + 370 52 395 430
GR-19002 Peania Fax: + 370 52 395 431
Phone: +0030-210-66 83 400
Telefax: +0030-210-66 46 273
Malaysia Serbia Turkey

Grundfos companies
GRUNDFOS Pumps Sdn. Bhd. Grundfos Srbija d.o.o. GRUNDFOS POMPA San. ve Tic. Ltd.
7 Jalan Peguam U1/25 Omladinskih brigada 90b Sti.
Glenmarie Industrial Park 11070 Novi Beograd Gebze Organize Sanayi Bölgesi
40150 Shah Alam Phone: +381 11 2258 740 Ihsan dede Caddesi,
Selangor Telefax: +381 11 2281 769 2. yol 200. Sokak No. 204
Phone: +60-3-5569 2922 www.rs.grundfos.com 41490 Gebze/ Kocaeli
Telefax: +60-3-5569 2866 Phone: +90 - 262-679 7979
Singapore Telefax: +90 - 262-679 7905
Mexico GRUNDFOS (Singapore) Pte. Ltd. E-mail: [email protected]
Bombas GRUNDFOS de México S.A. de 25 Jalan Tukang
C.V. Singapore 619264 Ukraine
Boulevard TLC No. 15 Phone: +65-6681 9688 Бізнес Центр Європа
Parque Industrial Stiva Aeropuerto Telefax: +65-6681 9689 Столичне шосе, 103
Apodaca, N.L. 66600 м. Київ, 03131, Україна
Phone: +52-81-8144 4000 Slovakia Телефон: (+38 044) 237 04 00
Telefax: +52-81-8144 4010 GRUNDFOS s.r.o. Факс.: (+38 044) 237 04 01
Prievozská 4D E-mail: [email protected]
Netherlands 821 09 BRATISLAVA
GRUNDFOS Netherlands Phona: +421 2 5020 1426 United Arab Emirates
Veluwezoom 35 sk.grundfos.com GRUNDFOS Gulf Distribution
1326 AE Almere P.O. Box 16768
Postbus 22015 Slovenia Jebel Ali Free Zone
1302 CA ALMERE GRUNDFOS LJUBLJANA, d.o.o. Dubai
Tel.: +31-88-478 6336 Leskoškova 9e, 1122 Ljubljana Phone: +971 4 8815 166
Telefax: +31-88-478 6332 Phone: +386 (0) 1 568 06 10 Telefax: +971 4 8815 136
E-mail: [email protected] Telefax: +386 (0)1 568 06 19
E-mail: [email protected] United Kingdom
New Zealand GRUNDFOS Pumps Ltd.
GRUNDFOS Pumps NZ Ltd.
South Africa Grovebury Road
17 Beatrice Tinsley Crescent Grundfos (PTY) Ltd. Leighton Buzzard/Beds. LU7 4TL
North Harbour Industrial Estate 16 Lascelles Drive, Meadowbrook Estate Phone: +44-1525-850000
Albany, Auckland 1609 Germiston, Johannesburg Telefax: +44-1525-850011
Phone: +64-9-415 3240 Tel.: (+27) 10 248 6000
Telefax: +64-9-415 3250 Fax: (+27) 10 248 6002 U.S.A.
E-mail: [email protected] GRUNDFOS Pumps Corporation
Norway 9300 Loiret Blvd.
GRUNDFOS Pumper A/S
Spain Lenexa, Kansas 66219
Strømsveien 344 Bombas GRUNDFOS España S.A. Phone: +1-913-227-3400
Postboks 235, Leirdal Camino de la Fuentecilla, s/n Telefax: +1-913-227-3500
N-1011 Oslo E-28110 Algete (Madrid)
Tlf.: +47-22 90 47 00 Tel.: +34-91-848 8800 Uzbekistan
Telefax: +47-22 32 21 50 Telefax: +34-91-628 0465 Grundfos Tashkent, Uzbekistan The
Representative Office of Grundfos
Poland Sweden Kazakhstan in Uzbekistan
GRUNDFOS Pompy Sp. z o.o. GRUNDFOS AB 38a, Oybek street, Tashkent
ul. Klonowa 23 Box 333 (Lunnagårdsgatan 6) Телефон: (+998) 71 150 3290 / 71 150
Baranowo k. Poznania 431 24 Mölndal 3291
PL-62-081 Przeźmierowo Tel.: +46 31 332 23 000 Факс: (+998) 71 150 3292
Tel: (+48-61) 650 13 00 Telefax: +46 31 331 94 60
Fax: (+48-61) 650 13 50 Switzerland Addresses Revised 09.09.2020
Portugal GRUNDFOS Pumpen AG
Bombas GRUNDFOS Portugal, S.A. Bruggacherstrasse 10
Rua Calvet de Magalhães, 241 CH-8117 Fällanden/ZH
Apartado 1079 Tel.: +41-44-806 8111
P-2770-153 Paço de Arcos Telefax: +41-44-806 8115
Tel.: +351-21-440 76 00 Taiwan
Telefax: +351-21-440 76 90 GRUNDFOS Pumps (Taiwan) Ltd.
Romania 7 Floor, 219 Min-Chuan Road
Grundfos Pompe România SRL Taichung, Taiwan, R.O.C.
S-PARK BUSINESS CENTER, Clădirea Phone: +886-4-2305 0868
A2, Telefax: +886-4-2305 0878
etaj 2, Str. Tipografilor, Nr. 11-15, Sector Thailand
1, GRUNDFOS (Thailand) Ltd.
Cod 013714, Bucuresti, Romania, 92 Chaloem Phrakiat Rama 9 Road,
Tel: 004 021 2004 100 Dokmai, Pravej, Bangkok 10250
E-mail: [email protected] Phone: +66-2-725 8999
www.grundfos.ro Telefax: +66-2-725 8998
Russia
ООО Грундфос Россия
ул. Школьная, 39-41
Москва, RU-109544, Russia
Тел. (+7) 495 564-88-00 (495) 737-30-
00
Факс (+7) 495 564 8811
E-mail [email protected]
ECM: 1308676
96496967 03.2021

www.grundfos.com
Trademarks displayed in this material, including but not limited to Grundfos, the Grundfos logo and “be
think innovate” are registered trademarks owned by The Grundfos Group. All rights reserved. © 2021 Grundfos Holding A/S, all rights reserved.

You might also like