((SSttaattee // RReeggiioonn // A Aggrroocclliimmaattiicc zzoonnee ssppeecciiffiicc lloow

w ccoosstt,, lliigghhtt w
weeiigghhtt,,
ccoom mppaacctt,, M
Muullttii uuttiilliittyy ffaarrm
mm maacchhiinneerryy aanndd iim mpplleem
meennttss aaffffoorrddaabbllee ttoo
ssmmaallll aanndd m
maarrggiinnaall ffaarrmmeerrss))

GOVERNMENT OF INDIA
Ministry of Agriculture
Department of Agriculture & Cooperation
Krishi Bhawan, New Delhi
2012
1
 Acknnowledgement

This compendium is compiled by Sri. P K Verma, Senior Agricultural

Engineer, Central Farm Machinery Training and Testing Institute
(CFMTTI), Budni and reviwed/edited by Shri Himat Singh, Deputy
Commissioner, M&T Division, Dept. of Agriculture and Coopertation,
Min. of Agriculture, Govt. of India.

This would not have been possible with active support and
collaboration of Officers and Staff of CFMTTI, Budni, NRFMTTI,
Hisar, SRFMTTI, Garaldine (AP), NERFMTTI, Biswanath Chariali,
Assam and Officers and Staff of M&T Division, Dept. of Agriculture
and Coopertation, and Central Insttirute of Agricultural
Engineering, Bhopal, Indian Council of Agricultural Research
(ICAR), Min. of Agriculture, Govt. of India.

Modification, updation and corrections are welcome through email

addressed to Shri Himat Singh, Dy. Commissioner, M&T Division,
Dept. of Agriculture and Coopertation, Min. of Agriculture, Govt. of
India at [email protected]

Subrata Nath
Director (M&T)

2
 M
Meecchhaanniizzaattiioonn aanndd TTeecchhnnoollooggyy D
Diivviissiioonn:: CCoonnttaacctt D
Deettaaiillss ooff O
Offffiicceerrss

Name and Designation Telephone/Fax Nos. E-mail

Shri Narendra Bhooshan, TelefaxNo.011/23381757 [email protected]
Joint Secretary (M&T)

Shri Subrata Nath, Tel.No. 011/23382226 [email protected]

Director (M&T)

Shri Himat Singh, TelefaxNo.011/23382922 [email protected]

Deputy Commissioner (M&T)

Shri Omkar Singh, TelefaxNo.011/23382922 [email protected]

Deputy Commissioner (M&T)

FFaarrmmM Maacchhiinneerryy T
Trraaiinniinngg aanndd T
Teessttiinngg IInnssttiittuutteess ((FFM
MTTT
TII)):: C
Coonnttaacctt D
Deettaaiillss ooff
OOffffiicceerrss

Name and Designation Telephone /FaxNos. E-mail

Shri V.N. Kale, Director 07564-234729 [email protected]
Central Farm Machinery Training & Testing 07564- 234743
Institute, Tractor Nagar,
BUDNI– 466445 (M.P.)

Shri A.N. Meshram, Director Telefax No. [email protected]

Northern Region Farm Machinery Training & 01662-276984
Testing Institute, Sirsa Road, HISSAR -
125001(HARYANA)
Shri C.R. Lohi, Director Telefax No.
Southern Region Farm Machinery 08551-286441 [email protected]
Training & Testing Institute,
P.O.GARLADINNE,
DISTT. ANANTPUR -515731 (A.P.)
Shri M.K. Vishwakarma, Director 03715-22942 [email protected]
North Eastern Region Farm Machinery Fax No.03715- 222094
Training & Testing Institute,
BISWANATH CHARIALI,
DISTT. SONITPUR – 784 176 (ASSAM)

PPlleeaassee aallssoo vviissiitt uuss aatt w

wwww
w..aaggrriiccoooopp..nniicc..iinn // w
wwww
w..ffaarrm
meecchh..ggoovv..iinn

3
 INDEX

Sr. No. Machinery for specific crops Page No.

1 Paddy 5-44
2 Wheat 45-80
3 Oil seed 81-104

4 Pulses 105-117
5 Sugarcane 118-132
6 Cotton 133-139

7 Groundnut 140-155

8 Potato/Carrot/Cabbage 156-168
9 Horticultural Tools (Fruits & 169-176
Vegetables)
10 Tea/Coffee 177-188
11 Spices 189-194
12 Fodder Crops 195-204

13 List of Agricultural Equipment 205-227

Manufactures

4
Paddy –Machinery
S.N Name of Machinery for Paddy Page.No
1 Animal Drawn Mouldboard Plough 6
2 Bullock Drawn Ridger 7
3 Power tiller 8
4 Improved Bhaker 9
5 Bullock Drawn Disc harrow 10
6 Blade Harrow 11
7 Animal drawn Patela Harrow 12
8 Bullock Drawn Bund Former 13
9 Power Tiller Mounted Terracer cum leveler 14
10 Animal Drawn Puddler 15
11 Paddy Transplanter 16
12 Paddy cum Daincha seeder 17
13 Rice Transplanter 18,19
14 Manual Rice Transplanter 20
15 Battery operated portable wetland weeder 21
16 Power weeder 22,23
17 Paddy cum weeds Cutter 24
18 Rotary Weeder 25
19 Rotary Power Weeder 26
20 Cono weeder 27
21 Garuda Paddy Power Weeder 28
22 Paddy weeder 29
23 Battery Operated Low Volume Sprayer 30
24 Power Sprayer 31
25 Battery operated Padgilwar Knapsack Sprayer 32
26 Broadcaster 33
27 Hand Rotary Duster 34
28 Self Propelled Vertical Conveyor Reaper 35
29 Mini Combine harvester for Paddy 36
30 Self Propelled Reaper 37
31 Vertical Conveyor Reaper 38
32 Reaper Binder 39
33 Pedal Operated Thresher 40
34 Multicrop Thresher 41
35 Paddy Winnowing Fan 42
36 Power Tiller Operated Axial Flow Pump 43
37 Bund Forming Machine 44
38 Centrifugal Pump 44

5
 Animal Drawn Mouldboard Plough

Features:

The implement consists of a share, mouldboard, landside, handle, depth gauge wheel and
wooden beam. The share is made from medium or high carbon steel and hardened to resist wear
during operation. The mouldboard that inverts the soil is made of mild steel. The gauge wheel
is used to control the depth of operation. It has convenient handles for easy
operation. For operation the plough is moved in the soil with the help of a pair of bullock.
Share of the plough penetrates into the soil and makes a cut below the soil surface. Mould
board lifts, pulverizes and inverts the furrow slice.
Specification:

Working width (mm) : 100,150,250,300

Uses:

Animal drawn mouldboard plough is used for ploughing and inversion of soil

List of Manufacturers: Please refer to Page-222-248 as per following

86,163,257,13,57,124,125,221,43,106,369,371,220,37,46,48,51,52,66,89,92,128,129,134,227,290,287,82,2
84,283,289,290,299,313,314,315,259,352,359,361,20,22,47,44,61,70,103,161,192,200,235,241,244,266,26
7,280,281,288,340,354,358,360,38,55,67,188,231,337,344,64,100,108,193,362,3,20,21,25,36,29,56,58,59,
112,114,140,147,250, 261,278,303,304,362.

6
 Bullock Drawn Ridger

Features:

The ridger plough consists of single share and double mould board attached to a short (steel) or
long beams (wooden). Two handles are provided to balance the ridger during operation. During
operation the share cuts furrow slice and pulverizes the soil, which moves on to the mouldboard
and is inverted. During the onward movement, a furrow is formed and ridges get formed in its
return pass. The point of the ridger can be replaced after it is worn out. In certain designs, the
width of ridges can also be adjusted.

Specifications:

Wing width (mm) 690

Length (from share point to wing) (mm) 780

Weight (kg) 25
Uses:

It is used for making ridges and furrows for potato and sugarcane planting and making field
channels for irrigation.
List of Manufacturers: Please refer to Page-222-248 as per following

13,220,48,259,287,282,289,301,34,,53,111,188,230,265,357,9,210,233,327,213,242,328,353,23,8
8,153,191,209,16,45,77,318,319,90,143,8,101,118,120,139

7
 Power Tiller

Sr. Parameter Observation

No
(i) Specifications

Type : Horizontal 4 stroke Single cylinder Water cooled Diesel

engine.
Combustion chamber : Direct Injection (DI)
Displacement :500 to 650 cc
Max. Torque : 3 to 5 Kg-m
Max.HP : 8-15hp
Governor System : Mechanical Centrifugal Type
Cooling System : Condenser Type Thermo Siphon cooling System
Dry Weight : 100 to 140 Kgs
Fuel Tank Capacity : 8 to 11 lts

(ii) TILLER
Type : Side drive rotary transmission
Forward : 6 Speeds
Reverse : 2 Speeds
Rotary : 2 Speeds (Optional 4 Speeds)
Clutch : Multiple Plate, Dry disc type
Brake : Hand operated internal expanding metalic Shoe Type.
Weight : 280 Kgs.

List of Manufacturers: Please refer to Page-222-248 as per following

:175,170,174,171,332,189,346,117,54,81,312,308,294
8
 Improved Bakhar

Features:

The improved bakhar consists of a frame made of mild steel angle section in which a V -shaped blade is attached by
means of fasteners. Behind the blade a roller made of l50rnm diameter Mild Steel pipe is provided to crush soil clods.
The frame also supports a handle by which the operator controls the implement. The unit is suitable for seedbed
preparation in black soil. This has a modified V blade replacing conventional curved blade for reduced draft. A pair of
bullocks is used for pulling the implement.

Specifications:

Overall Dimensions

- Length (mm) : 1220

- Width (mm) : 850
- Height (mm) : 650
Weight (Kg) : 45

Working Width (mm) : 500

Working Depth (mm) : 60

Operating Speed (km/h) : 2.0 – 3.0

Field Capacity (ha/h) : 0.062 – 0.075

Field Efficiency (%) : 70

Draft (N) : 450 - 550

Labour Requirement (Man-h/ha) : 15

Uses:

It is used for seedbed preparation in black soil.

9
 Bullock Drawn Disc Harrow

Features:

The harrow consists of a frame and shafts on which discs are mounted. The shafts are held in bearings for smooth
rotation of discs. The shafts are called gangs on which discs are arranged and equally spaced with the help of spools.
Single gang and double gang disc harrows are equally popular and operated using a pair of animals. The discs are
fabricated from carbon steels and the cutting edges are hardened. T he harrow is provided with an operator's seat and
also has a transport wheel which aids in easy transportation. The operator's seat enables the operator to ride instead of
walking, which helps in deeper penetration and reduces drudgery.

Specifications:

Number of discs : 4-6-8

Disc diameter (mm) : 400-450

Number of gangs : 1-2

Width of cut (mm) : 800-1200

Depth of cut (mm) : 50-120

Capacity (ha/day) : 1.5-1.75 (8 hrs)

Weight (kg) : 80-120

Power requirement : Pair of bullock

Uses:

It is used for seedbed preparation, cutting and burying of grass and weeds.

List of Manufacturers: Please refer to Page-222-248 as per following

3, 59,109,112,307

10
 Blade Harrow

Features:

The implement consists of a blade, blade holding prongs, wooden body and a wooden beam. The blade is
attached to the bakhizr frame prongs with the help of rings, which are hammered into place. It cuts a thin
slice of soil and removes the weeds etc and requires a pair of bullocks to pull the implement. The V-shape
of the blade has a self-cleaning advantage, which prevents adherence of weeds and its roots, thus
enabling speedier operation and improving the uniformity of cut as compared to the straight bladed
version

Specifications:

Cutting width of blade (mm) : 500-600

Shape of blade : Straight or V shape

Weight of blade (kg) : 4-5

Weight of the implement (kg) : 25-30

Working capacity (ha/day) : 0.5-0.6

Uses:

It is used for the primary tillage operations.

List of Manufacturers: Please refer to Page-222-248 as per following

46,129,134,259,287,282,284,283,289,313,361,309,23,36,88,140,147,152,153,304

11
 Animal Drawn Patela Harrow

Features:

The animal drawn patela harrow consists of a heavy batten made of Sal wood having 1500mm length and
100mm thickness on which a Mild Steel angle frame is fixed by means of screws. The frame carries a bar
to which curved and pointed hooks are attached. The bar can be raised or lowered by means of the lever
having a slotted sector to lock its position. Some models may be up to 2000mm in length. It is secondary
tillage equipment for clod crushing, stubble or trash collection, levelling and smoothing of land surface
before seeding.

Specifications:

Overall Dimensions

- Length (rom) : 1500

- Width (mm) : 230
- Height (mm) : 100
Weight : 65

Working width (mm) : 1500 / 2000

Working depth (mm) : 60

Draft (N) : 600

Operating speed (km/h) : 2.5

Field capacity (ha/h) : 0.3

Field efficiency (%) : 70

Labour requirement (man-h/ha) : 3-4

Uses:

It is secondary tillage equipment and used for breaking of clods, collection of stubble or trash and levelling
of the field surface before the application of seedlings.

List of Manufacturers: Please refer to Page-222-248 as per following

: 63

12
 Bullock Drawn Bund Former

Features

The implement consists of two blades, flat iron frame bent at an angle a handle attached to the frame with
tie bars and wooden beam. The operator's handle is made of wood for providing better grip and
convenience in operation and attached to the frame with the help of suitable brackets. The frame is bent at
an angle and has holes for adjusting the space between the blades. The profile of blades is made to a shape
so that bund fonned is trapezoidal and remains stable. The blades are attached to the frame with fasteners.
For operation, a pair of bullock pulls the implement; the blades gather the loose soil and accumulate it in
the fonn of bund.

Specifications

Size (mm) : 750-1050

Size of bunds : Adjustable

Capacity (ha/day) : 3-4

Power requirement : A pair of bullocks

Weight (kg) : 25-30

Uses

It is used for making bunds for irrigation purpose.

List of Manufacturers: Please refer to Page-222-248 as per following

:23

13
 Power Tiller Mounted Terracer cum Leveller

General Information :

The unit consists of 1.0 m wide curved mild steel blade with a steel cutting edge at the bottom. It is
attached to the front of the power tiller with the help of a mounting plate. Two solid side support arms
made of 25 x 12.5 mm mild steel flat holds the unit rigidly during the operation. The lifting of the blade
can be made by tail wheel adjustment of the rotary tiller while keeping the tilt angle constant. Two side
guards are provided to avoid spilling of soil on both sides of the blade. Bottom skids made of 2 mm mild
steel sheet are provided below the blade for maintaining uniform load.

Function: For land leveling, terracing and bund formi

Specification:

i. Type : Mounted implement

ii. Power requirement : 8 to 10 hp power tiller
iii. Overall dimensions : 1000 x 780 x 580 mm
iv. Weight : 35 kg
v. Capacity : 0.08 m3 ofsoil
Cost of the unit : Rs. 4,000/-

Salient features

: Simple in design, construction and ease of operation and transport Efficient for land levelling with a
transportation efficiency of 86.6 per cent Cost of moving 1 m3 of soil to 1 m distance is Rs.3.30. Cost of
bund forming is Rs.17.75/m3 which is comparable with the manual bunding.

List of Manufacturers: Please refer to Page-222-248 as per following

: 68

14
 Animal Drawn Puddler

Features

The animal drawn puddler consists of tubular steel section main frame on which other components are mounted, mild
steel sheet leveller for levelling the puddled soil simultaneously, operator's seat which helps in increasing the depth of
puddling to the required depth by operator's weight, a steel beam for pulling the puddler by a pair of animals, three
number of concentric circular wheels used for transporting and also help in puddling the soil. The wheels are mounted
on the axle, which is connected to the hitching frame. Mild steel angle sections in the particular geometry are welded
to the wheels for carrying out puddling operation. For operation, the puddler is transported to the field, which has been
flooded with water. As the animals move forward, the wheels start revolving and angles mounted on the wheels cut
the soil and weeds and puddling takes place. For transplanting of paddy with rice transplanter field should be properly
levelled. A leveller mounted behind the puddler accomplishes task of levelling. The beam of the puddler is hitched to
the yoke of the animals and adjusted according to their size. The puddler is suitable for shallow puddling. With the
puddler a higher field capacity and better puddling index can be achieved over the traditional puddling methods, and
results in reduced cost of operation in addition to quality output.

Specifications

Overall dimensions

Length (mm) : 1020

Width (mm) : 1304
Height (mm) : 1101
Performance

Working width (mm) : 1140

Working depth (mm) : 100
Pull (N) : 650
Speed (km/hr) : 1.35
Field capacity (ha/hr) : 0.10
Field efficiency (%) : 65
Uses

The animal drawn puddler is used for shallow puddling and levelling of puddled soil and also to uproot the weeds.

List of Manufacturers: Please refer to Page-222-248 as per following

: 239

15
 Manual Paddy Transplanter

Function: For transplanting mat type paddy seedlings. Suitable for all transplanted type paddy varieties.

Specification:

i. Type : Manually operated

ii. Power requirement : One operator and one labour to transport mat seedlings

iii. Overall dimensions : 1230 x 1250 x 835 mm

iv. Weight : 17 kg

v. Capacity : 0.25 ha / day

General Information :

The machine consists of a seedling tray, forks, handle and skids. By pressing the handle, the forks pick-up
the seedlings and plant them in 6 rows. For every stroke of the handle the seedling tray moves side wards
for uniform picking of seedlings by the forks. The operator has to pull the machine while punching the
handle at the desired spacing. The Row to row spacing is 200 mm.

Cost of the unit : Rs. 5,000/-

Salient features : Planting can be done in 6 rows at a time.

List of Manufacturers: Please refer to Page-222-248 as per following

: 348, 353,349,254,119,211,155,255,338

16
 Paddy cum Daincha Seeder

Function: It sows paddy in 3 rows and green manure in 3 rows simultaneously.

Specification:

i. Type : Manually operated

ii. Power requirement : One operator and one labour to transport mat seedlings
iii. Overall dimensions: 1650 x 1600 x 690 mm
iv. Weight : 15 kg
v. Capacity : 0.6 -0.8 ha / day

General Information : The seeder has two drum hoppers, two skids, a ground wheel and a
handle. Paddy seed rate can be adjusted from 72 - 75 kg per ha. The seeder
simultaneously sows pre germinated paddy seeds and daincha seeds in
alternate rows and puddled soil. The advantage of this seeder is avoidance
of separate cultivation of green manure crop.

Cost of the unit : Rs. 4,250/-

Salient features : Uniformity in seed sowing and plant population Reduction in seed rate
and the cost of thinning is reduced Hill dropping of seeds is achieved and
continuous drilling is eliminated. Growth of competitive weeds is checked
due to green manure crop.

List of Manufacturers: Please refer to Page-222-248 as per following

: 154,240

17
 Rice Transplanter

(Self propelled- walking on)

Sr. Parameter Observation

No
(i) Specifications

Type : 4-6 row , self propelled , walking on

Size of transplanter ,mm : 4 x 30
Engine Type : Three cylinder, four stroke , water cooled, direct
injection, Diesel Engine.
Cylinder
(ii) Capacity cc : 898
Bore/stroke (mm) : 72.0/73.6
No. of cylinder : three
Field performance data
Avg . speed : 2.15 to 2.49 Kmph
Avg. Area : 0.15-0.21 ha/hr
Time required :1.43 -2.55hr/ha
(iii) Fuel consumption l/hr : 0.70-0.82
l/ha : 3.81-5.48

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture : 348, 353,349,254,119,211,155,350,33

18
 Rice Transplanter

Specification

Engine Model : 170F Single Cylinder Air Cooled Diesel

Rated Power : 2.94 Kw
Rated Speed : 2600 rpm
Weight : 305 Kg
Overall Dimensions( L X W X H) : 2500 X 2131 X 1300
Row Number :8
Row Spacing : 238mm
:140~170 (Standard), 100~120, 120~140, 170~200,
Distance Between Hills
200~230mm (Optional)
Planting Speed : 0.44~0.54 mt/second
Road Travelling Speed : 8.2 km/hr

Travelling Mechanism
: Single Wheel Driven - Steel Wheel in Paddy Fields or Rubber
Type
Tyre on land

Planting Mechanism
: Separate Crank Shaft & Connecting Rod System with
Type
Seedling Pusher
Growing density of seedings : 34~42 hills/m2 (Depending on hill to hill Distance)
: 3~8 (Adjustable according to density and Thickness of
Number of Seedlings per hill
seedlings)
Width of Seedling Mat : 220mm
Planting Depth : 0~60mm (Adjustable)
Capacity : 1300-2000m2/hr
List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture : 368,148

19
 Manual Rice Transplanter

Features:

The manual rice transplanter consists of floats made of marine plywood, seedling tray that accepts the mat type
nursery, a tray indexing mechanism and pickers for planting seedlings. When the operator pulls the machine and
operates the handle, the picker, six in number, gathers two or three seedlings and place them in the puddled soil. The
row to row distance can be maintained at 200 mrn. It consists of handle, picker assembly, seedling tray, tray indexing
mechanism, mainframe, base frame, seedling pushing lever, feeder link assembly, and wooden skid and pivot arm
assembly.

Specifications:
Overall Dimensions
- Length (mm) : 1460
- Width (mm) : 1330
- Height (mm) : 530
Weight (kg) : 20

Row spacing (mm) : 200

Working width (mm) : 1200

Working depth (mm) : 20-30

Operating speed (km/h) : 0.25 – 0.70

Field efficiency (%) : 55-60

Plants per hill : 2-5

Draft (N) : 120-180

Field capacity (ha/h) : 0.04-0.05

Labour requirement (man-h/ha) : 40-50

Uses:

It is used for transplantingm att ype rice seedlingsi n puddleds oil in six rows.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer: 63

20
 Battery operated portable wetland weeder

Function:For weeding in SRI field.

Specification:

i. Type : Manual operated

ii. Power requirement : 8 to10 hp Power tiller

iii. Capacity : 0.2 – 0.3 ha/day

Cost of the unit : Rs.8, 000/-

Salient features : Easy to operate compared to cono weeder

Operated without experiencing any drudgery

Weeding efficiency: 95%

Cost of operation: Rs.625/ha

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer : 68

21
 Power Weeder

Specification:

Engine type : 2 stroke, single cylinder, Petrol engine Forced air Cooled
Engine Capacity : 49.8 cc
Carburetor : Diaphragm type
Ignition system : TCI Solid state ignition
Max. Output Power (In Kw./HP /rpm) : 1.9 Kw/2.54 HP / 10000
Max. Torque : 1.8 N.m.
Fuel tank capacity : 1000 ml.
Fuel consumption : 75 minutes / liter
Starting system : Recoil starter
Handle : Not adjustable
Working Depth : 35 to 65 mm (1 ½” to 2 ½”)
Working Width : 300 mm.
Weight : 15 Kg.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture :232

22
 Power Weeder

Specification:

Petrol engine : gx200, 6. 5 hp (honda)

Diesel engine : 4-6 hp (air cool)
Starting system : recoil
Gears : 3 forward & 2 reverse
Gear box : alluminium body
P. T. O. : 990 rpm
Wheel size (inch) : 4. 00x8
Width of rotavator (cm) : 46
Over all weight (k. G.) : 94

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture : 232

23
 Paddy Cum Weeds Cutter

(Engine Drive single person Operated)

Make & Model : Paddy cum weeds Cutter

Specification
Name of machine : Paddy cum weeds cutter
Type of machine : Engine drive single person operated.
Type of crop recommended : paddy
Type of weeds / brush recommended: Any type of weeds / brush by changing cutting attachment.
Prime mover:
Type : single cylinder, two stroke,air cooled, petrol Engine
Maximum horse power (KW) : 1.40-1.80 KW
Capacity of engine : 40 -50 cc
Bore/ stroke (mm) : 40/30
Back up torque : 10.5 %
S.F.C : 639 g/KwH
Fuel consumption:
Paddy harvesting : 0.87 to 0.96 lit/hour
Weeds harvesting : 0.87 to 0.93 lit/hr

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture : 99, 232, 80,351,256,252

24
 Rotary weeder

Make & Model : Paddy cum weeds Cutter

Specification
Prime Mover
Type : 4 stroke (overhead valve), air cooled engine,single cylinder petrol Engine
Power rating (Kw) :1.6
Engine speed :--
Rated : 4925
Cylinder:
Bore/Stroke : 41.8/36
Capacity (cc) : 40 -50
Engine performance Test
Maximum power : 1.56 Kw
Field performance Test
Avg. depth of cut (cm) : 2.8 to 5.7
Avg. width of cut (cm) : 37 to 43.6
Area covered (ha/hr) : 0.036 to 0.069
Fuel cons mption
- l/hr : 0.31to 0.38
- l/ha : 4.50 to 9.77
Back-up torque : 10.3 %

25
 Rotary Power Weeder

Specification

Sr.No Parameter Observation

(i) Specifications
Type : Single cylinder, four stroke, air cooled,
Direct injection Diesel engine.
Nominal Speed (km/h) : 2.18
Track width (mm) : Max. 708, Min. 618
No. of wheel : One
Dia. of wheel (mm) : 143
Size of shaft (mm) : 580 x 30.78
Dia. of rotor (mm) : 450
Effective cut of width (mm) : 360
Dia. of flange (mm) : 235
Thickness (mm) : 4.55
Distance between flanges (mm) :
- LHS to center : 130
- Centre to LHS : 117
Sprocket dia (mm) : 157.6
Root dia. (mm) : 141.2
No. Of Teeth : 30
Pitch of teeth (mm) : 16.8
Depth of teeth (mm) : 8.00
Overall dimensions :
Length (mm) : 2000
Width (mm) : 700
Height (mm) : 1000
Weights (kgs) : 47
(ii) Engine
No.of cylinders : One
Cubic capacity (cc) : 325
Rated engine speed (rpm) : 1500

26
 Cono Weeder

Features

The weeder consists of two rotors, float, frame and handle. The rotors are cone frustum in shape, smooth and serrated
strips are welded on the surface along its length. The rotors are mounted in tandem with opposite orientation. The
float, rotors and handle are joined to the frame. The float controls working depth and does not allow rotor assembly to
sink in the puddle. The cono weeder is operated by pushing action. The orientation of rotors create a back and forth
movement in the top 3 cm of soil.

Specifications

Width (mm) : 370

Height (mm) : 1400

Type : Manually operated

Weight (kg) : 5 to 6

Number of rotors :2

Capacity (ha/day) : 0.18

Uses

The cono weeder is used to remove weeds between rows of paddy crop efficiently. It is easy to operate, and does not
sink in the puddle.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer: 63

27
 Garuda Paddy Power Weeder

Specification
Model : 3PT250
Engine : P H25, 1.75hp
Overall Dimensions (mm) : 1470 x 735 x 830
Fuel : Petrol (with 2T oil)
Weight (kgs) : 17
Rotavator : Chain Drive, Centre Drive
Speed : 300
No. Of Blades :8
Weeding Width : 150(STD)
Row spacing : 250
Weeding kit : 120, 180
Accessories :-
Suitable for : 200, 300 (ROW)

Features

• Low Maintenance & Low Weight - 17 Kg

• Adjustable row spacing and quick land coverage
• Suitable for 15, 30 and 45th days of transplantation.
• Suitable for Machine Transplantation (SRI Method) and Manual planting in rows.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture: 2

28
 Paddy Weeder

Features:

This paddy weeder is essential for those farmers who grew paddy under Japanese method.
To use this implement it is necessary that paddy is planted in rows and there should be at least 2”
to 3” of water level in the field for the implement to work satisfactorily. It removes weeds, buries
them deep aerates the soil, prunes the roots and generally encourages tiller growth.

Our Japanese Paddy Weeder is a simple but strongly built implement. The rotary tines are
arranged radially on the axle. The weeder when pushed, moves on the rotating tines, churns the
soil and lifts the weed. It works easily and single person can cover ½ to 1 acre in a day.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer : 219

29
 Battery Operated Low Volume Sprayer

Function: For spraying chemicals on crops like paddy, groundnut, pulses and vegetables. It requires 50 liters of

water per hectare.

Specification:

i. Type : Knapsack

ii. Power requirement : 6 V rechargeable batteries

iii. Overall dimensions : 380 x 250 x 725 mm

iv. Weight : 17 kg with pesticide

v. Capacity : 1.5 ha / day

General Information : A 10 liter pesticide tank and a 6 volt rechargeable battery are mounted on a suitable frame
which is carried on the back of the operator. The chemical is taken from the tank to the
spinning disc fitted with the direct current micro motor. A cut-off valve is provided to
regulate the flow. The weight of the modified battery sprayer is about 17kg with pesticide.
The pesticide application rate of the sprayer is 50 liters per hectare.

Cost of the unit : 1,500/-

Salient features : This sprayer is suitable for any crop like paddy groundnut, pulses and vegetables

repairs and maintenance problems are less reduced water requirement

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer : 225,215,260,185,82,91,68

30
 Power-Sprayer

Technical specification

Function : For Spray in Diff. Crops & Orchards

Coverage : 1 Acre / Hour
Tank Cap. : 250 Liters
Max. Working Pressure : 400 PSI
Length of Delivery Hose : 100 Meters

Special Features:

• Portable, Compact and Light in weight.

• Equipped with 100 mtr. Long Delivery Hose and Spray Gun.
• Reel Attachment for easy Winding and Unwinding of delivery hose.
• Light Weight Tank made of LDPE Plastic with capacity of 250 Ltr.
• Tiplex Pump with Stainless Steel Piston and Oil Bath Lubrication.
• List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer: 232, 31

31
 Battery operated Padgilwar Knapsack sprayer

Specification

Type : Rechargable battery operated sprayer

Tank capacity : 15 litre

Pump discharge : 560ml/min

Length of lance : 530mm

Nozzle type : Fixed, hollow cone type

Spray angle of nozzle : 88 deg

Discharge rate of nozzle : 685 ml/min

List of Manufacturers: Please refer to Page-222-248 as per following

Manufactur : 178

32
 Broadcaster

Function : To broadcast seeds and fertilizers.

Specification:

i. Type : Manually operated

ii. Power requirement : One labour

iii. Overall dimensions : 360 x 510 x 420 mm

iv. Weight : 3.6 kg

v. Capacity : 4 ha / day

General Information : The centrifugal type unit that is hung in front of the operator is used to broadcast seeds

and granular fertilizers by rotating the handle. The material is put in the hopper in

batches of 3 to 5 kg and the operator has to walk while rotating the handle. The material

is spread over a 3.5 to 10 m width.

Cost of the unit : Rs. 3,000/-

Salient features : Suitable for broad casting small seeds like sesame, sorghum, etc.

Large area can be sown in less time.

Uniform distribution of seeds.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer : 68

33
 Hand Rotary Duster

Features:

The hand rotary duster is available in two models, shoulder mounted and belly mounted. It is a common type of duster
being used by the farmers. The duster consists of a hopper, fan/blower, rigid/flexible discharge pipe, reduction
gearbox, rotating handle, shoulder straps, and metering mechanism. The hopper is either made of plastic or aluminum.
The hopper made from mild steel sheet is coated with anti-corrosive material for longer life. The duster has
mechanical agitator connected to the gearbox placed in the hopper, which chums the chemical and prevent clogging of
the outlet. The adjustable orifice plate mounted below the hopper outlet controls the application rate. The fan/blower
is enclosed in the casing and is rotated with the handle through gearbox. For operation, the hopper is filled 1/2 to 3/4th
of the capacity of the hopper. This is mounted on the shoulder/belly with the help of adjustable straps. The discharge
pipe fitted with spoon type deflector is directed towards the target continuously rotating the handle. The chemical in
dust/powder form drops from the hopper in the discharge pipe having an air stream created by the blower. These dust
particles emerging in, the form of cloud from the discharge pipe is carried to the plant where these settle on the leaves,
stems and other parts.

Specifications

Overall length (mm) : 280

Overall width (mm) : 330
Overall height (mm) : 330
Weight (kg) : 3.5
Hopper capacity (1) : 4-5
Field capacity (ha/ day) : 0.6 (for field crops)
Uses

For control of pests and diseases by use of chemicals in the dust forms in nursery, vegetable gardens, field crops, tea
and coffee plantations, green houses, glasshouses and godowns.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer: 335,63,53,91,116,366

34
 Self-Propelled Vertical Conveyor Reaper

Function :For harvesting paddy.

Specification:

i. Type : Self-propelled engine

ii. Power requirement : 3.0hp

iii. Overall dimensions : 2200 x 950 x 1100

iv. Capacity : 0.125 ha h-1

General Information : Vertical conveyor reaper (0.75 m) of TNAU is light in weight and hence shifting the
reaper from one field to another is easy. Operating the reaper is fatigue free. The total cost
of the machine is well within the purchasing power of the small farmers. It is highly cost
economical when compared to other paddy harvesters and combine and manual harvesting.

Cost of the unit : Rs.60, 000/-

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer : 68,57,31,142,2,18,113,136,135,195,367,364,57,181,82,92,268,302,355,47,44,158,
159,162,235,324,111,42,100,228,242,358,350,356,90,32

35
 Mini Combine Harvester for Paddy

Function : For harvesting paddy.

Specification:

i. Type : Self-propelled engine

ii. Power requirement : 3.0hp

iii. Overall dimensions : 2200 x 950 x 1100

iv. Capacity : 1 ha / day

Cost of the unit : 3, 00,000

Cost of operation : Rs.1300 / ha

Silent features : Suitable for small and marginal farmers.

Can be easily transported to inaccessible fields

Saving in cost: 80%

Saving in labour: 91%

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer : 68

36
 Self- Prop elled Reap er

Specification
Length : 94.5"
Width : 45.3"
Height : 43.3"
Weight : 180 Kg.
Engine
Fuel Cons. : 1.25 Ltr/Hour (Approx)
Speed : 3 Km./Hour
: 0.5 Acre/Hour (Approx)
Area Covered Enables Reaping Work of 3 feet width
Wheat, Rice & Soyabean

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture : 57

37
 Vertical Conveyor Reaper

Specification:

Dimensions (l x w x h), (mm) : 2570 x 1850 x 1250

Weight (kg) : 85

Number crop dividers :6

Type of cutting unit : Cutter bar with serrated V-shaped blades

Power source : 8-10 hp

Capacity (ha/h) : 0.20-0.40

Cost (Rs) : 1,00,000

Uses : It is used for harvesting and windrowing of erect rice crop

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer : 31,182

38
 Reaper Binder

Specification:

Overall dimensions : 3600×1850×1200 mm

Cutting width : 1220 mm

Cutting height : 50 – 70 mm

Rope requirement : 1 spool/acre

Engine : 10.2 hp, Air-cooled, Diesel engine.

Fuel consumption : 1 Lit/hr

Working Capacity : 0.4 ha/ hr

Cost (Rs) : 2,50,000

Uses : Harvesting & binding of grain crops on single operation. It is useful for Wheat,
Paddy, Oats, Barley & other grain crops height up to 85 to 110 cm.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer : 31

39
 Pedal Operated Thresher

Features

It consists of wire-loop type threshing cylinder, power transmission system, mild steel sheet body and foot pedal. The
threshing cylinder consists of wire-loops of ‘U’ shape embedded in wooden or metallic strips joined to two discs. A
shaft carries the threshing cylinder and is connected to the transmission system. The transmission system consists of
meshed gears or sprocket-chain mechanism. T he larger gear or sprocket is connected to foot pedal/bar with links. The
foot pedal/bar is always in raised position. On pressing the pedal the threshing cylinder starts rotating. For continuous
rotation of the cylinder, the pedal is lowered and raised repeatedly. For operation, paddy bundle is held in hands and
earhead portion of the crop is placed on the rotating cylinder. The wire-loops hit the earheads and grain get detached
from the rest of the crop.

Specifications
Loop wire diameter (mm) :4
Number of wire loops : 144
Number of wire loop strips : 12
Transmission system : Pedal C rank mechanism with 1:4 gear ratio
Power source : One person Dimensions (lxwxh) (mm) : 1250 x 650 x 630
Cylinder size (mm) : 400 diameter x 600 length

Weight (kg) : 36
Performance results
Crop : Rice
Broken grains (per cent) : Nil
Total grain losses (percent) : 1.2
Threshing efficiency (per cent) : 98.8
Output capacity (kg/h) : 44
Labour requirement (man-h/q) : 5.0
Uses

It is used for threshing rice crop.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer: 57

40
 Multicrop Thresher

(i) Specifications
Main Crop : Paddy
Other crops : Sunflower, Maize, Jowar, Bajra, Ragi, Wheat etc.
Prime-mover Type : Four stroke diesel engine/Electric engine
Frame Dimensions (mm) : 2340 x 860 x 1120
Type of Crop feeding system : Rectangular
Size of feeding hopper (mm) : 3360 x 860
Feeding System :
- Size of platform (mm) : 30 x 30 x 4.5
- Height of feeding chute from G.L. : 1760
Threshing Cylinder
Type : Rasp bar, closed
Size of cylinder (mm) : 735 x 470ø
Size of rasp bar : 735 x 50 x 22.53
Nominal Dia of cylinder (mm) : 470
Width of cylinder : 735
Concave
Peripheral length (mm) : 740
Effective length (mm) : 720
Peripheral width (mm) : 580
Effective width (mm) : 470
Effective area (sq. M) : 0.338
Concavity (mm) : 140
No. of sieves : Three
(ii) Lab. Performance Result
Power requirement : 4.2 to 5.7 kw/h
Hourly Fuel Consumption : 1.96 to 1.50 l/h
Cleaning efficiency : 93.90 % to 95.47 %

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer: 246,319,320,338,331,2,18,86,113,136,135,195,367,364,14,40,

41
 Paddy Winnowing Fan

Starting system : Recoil starter

Carburetor type : Diaphargm
Fuel tank capacity : 1.2 ltr.
Transmission : Worm gear reduction
Drill diameter : 9 to 25 cm (4” to 10”)

Net weight (drill excluded) : 9.2 kg

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture : 232

42
 Power Tiller Operated Axial Flow Pump

Function: To lift water from open water sources

Specification:

i. Type : Axial flow type

ii. Power requirement : 8 -10 hp power tiller

iii. Overall dimensions : 300 x 750 x 620 mm

iv. Weight : 26 kg

v. Capacity : 2500 litres per minute at 3.0 m head

General Information : The unit consists of a specially designed axial flow impeller which is secured to a pump
shaft and encased inside a 19 cm diameter mild steel discharge tube .The impeller has two
mild steel sheet-metal vanes welded to a threaded hub and has an average pitch of 20
degree. The impeller shaft runs in a long nylon bearing housed in mild steel tube which is
welded to the pump assembly at an inclination of 30 degree. The pump can be coupled to
the power tiller engine pulley through a flexible shaft supported by a frame near the power
tiller engine and it is aligned perfectly by fixing the pump in desired position through
hinge and adjustable frame. Behind the axial flow impeller is a set of diffusion vanes which
serve to straighten the spiral flow from the impeller for improved efficiency.

Cost of the unit : Rs. 10,000/-

Salient features : Highly suitable for lifting water from open water sources
Capacity is 2 to 3 times higher than that of centrifugal pumps for lifts between 1.0 and
3.0 meters and hence high efficiency at lower lifts

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer : 68

43
 Bund Forming Machine:

Features:

The Bund Former will strengthen the existing bund without damaging the height of the bed by adding on the
sideways. This machine is suitable for both dry and wet conditions. The power required to operate this machine is
about 40-50hp with 540rpm at PTO. The height of the bund is 25-30 cm.

Manufacture: 8

CENTRIFUGAL PUMP

Specification:

Pump Size: 2.5” x 2.5” & 3” x 2.5”

Discharge: 9 to 49 lps

Head range: 21 to 29 Mtrs

High Head: 3000 to 10000 feet

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture: 57

44
Wheat Machinery
S.N Name of Machinery for Wheat Page.No
1 Improved Iron Plough 46
2 Power tiller 47
3 Improved Bhaker 48
4 Birsa Animal Drawn Ridger plough 49
5 Bullock Drawn Disc Harrow 50
6 Animal drawn Patela Harrow 51
7 Bullock Drawn Bund Former 52
8 Bullock Drawn Seed Planter 54
9 Power Tiller Mounted Terracer cum leveler 53
10 Three Row Seed Cum Fertilizer Drill 55
11 Birsa Animal Drawn Seed drill 56
12 Manually Operated Double Wheel weeder 57
13 Manually Operated Single Wheel weeder 57
14 Manually Operated Seed Dressing Drum 58
15 Power Tiller Operated Boom Sprayer 59
16 Battery Operated Low Volume Sprayer 60
17 Power Sprayer 61,62
18 Engine Operated Power sprayer 63
19 Battery operated Padgilwar Knapsack Sprayer 64
20 Broadcaster 65
21 Hand Rotary Duster 66
22 Power Reaper 67
23 Vertical Conveyor Reaper 68
24 Reaper Binder 69
25 Fodder Harvester 70
26 Pedal Operated Thresher 71
27 Multicrop Thresher 72
28 Portable Pump sets 73
29 Power Tiller Operated Axial Flow Pump 74
30 Roto seeder 75
31 Bund Forming machine 76
32 Stone Burier 77
33 Power Harrow 78
34 Centrifugal Pump 79
35 Horticulture Sprayer 80

45
 Improved Iron Plough

Function: Dry ploughing in all types of soil. The plough is provided with a mouldboard as an optional
attachment for soil inversion.

Specification:

i. Type : Bullock drawn implement

ii. Power requirement : A pair of bullocks

iii. Overall dimensions : 3500 x 250 x 900 mm

iv. Weight : 17 kg

v. Capacity : 0.5 ha / day

General Information : The bullock drawn improved iron plough is made of mild steel except the pole
shaft and hence it has longer life. As and when the share wears off, it can be
pushed forward. Pole shaft angle and height of handle can be pushed forward. Pole
shaft angle and height of handle can be adjusted according to field recruitments.
The plough is provided with a mould as an optional attachment for soil inversion

Cost of the unit : Rs. 1,000/-

Salient features : The improved iron plough is suitable for dry ploughing in all types of soil

It can be operated by pair of bullocks

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer : 86,163,257,13,57,124,125,221,43,106,369,371,220,37,46,48,51,52,66,89,92,128,129,134,
227,290,287,282,284,283,289,290,299,313,314,315,259,352,359,361,20,22,47,44,61,70,103,161,192,200,2
35,241,244,266,267,280,281,288,340,354,358,360,38,55,67,188,231,337,344,64,100,108,193,362,3,20,21,
25,36,29,56,58, 59,112, 114, 140, 147,250, 261,278,303,304,362

46
 Power Tiller

Sr.No Parameter Observation

(i) Specifications
Type : Horizontal 4 stroke Single cylinder Water cooled
Diesel engine.
Combustion chamber : Indirect Injection (IDI)
Displacement : 500 - 700cc
Max. Torque : 3.0-5.0kgm/
Max.HP : 8-15 hp
Governor System : Mechanical Centrifugal Type
Cooling System : Condenser Type Thermo Siphon cooling System
Std. Pulley (DIA) : 120mm
Dry Weight : 119 Kgs
Fuel Tank Capacity : 11 lts
(ii) TILLER
Type : Side drive rotary transmission
Forward : 6 Speeds
Reverse : 2 Speeds
Rotary : 2 Speeds (Optional 4 Speeds)
Clutch : Multiple Plate, Dry disc type
Brake : Hand operated internal expanding metalic Shoe Type.
Weight : 280 Kgs.

(iii) Performance
Tilling Width : 540 to 800 mm maximum
No. of tines : 16
Tilling Depth :80 to 150mm maximum
Plough Depth : 220mm maximum
Over all dimensions : 2300 mm x 900 mm x 1210 mm
(Length * Width * Height)

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture : 175,170,174,171,332,189,346,117,54,81,312,308,294

47
 Improved Bakhar

Features:

The improved bakhar consists of a frame made of mild steel angle section in which a V -shaped blade is attached by
means of fasteners. Behind the blade a roller made of l50rnm diameter Mild Steel pipe is provided to crush soil clods.
The frame also supports a handle by which the operator controls the implement. The unit is suitable for seedbed
preparation in black soil. This has a modified V blade replacing conventional curved blade for reduced draft. A pair of
bullocks is used for pulling the implement.

Specifications:

Overall Dimensions

- Length (mm) : 1220

- Width (mm) : 850
- Height (mm) : 650
Weight (Kg) : 45

Working Width (mm) : 500

Working Depth (mm) : 60

Operating Speed (km/h) : 2.0 – 3.0

Field Capacity (ha/h) : 0.062 – 0.075

Field Efficiency (%) : 70

Draft (N) : 450 - 550

Labour Requirement (Man-h/ha) : 15

Uses:

It is used for seedbed preparation in black soil.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer : 63

48
 Birsa Animal Drawn Ridger Plough

Features:

It is a ridger plough to perform all functions of country plough with added efficiency and advantages. It is suitable for
hilly region of Chota Nagpur region. It saves 9 per cent labour and operation time and 5 per cent cost of operation
compared to the conventional method of using country plough. The Birsa ridger plough was found to be better than
the country plough in its performance.

Specifications:

Dimensions (l x w x h) (mm) : 250x150x80

Weight (kg) : 5 (without beam)

Performance results

Width of cut (mm) : 156

Depth of cut (mm) : 108

Operating speed (km/h) : 2.68

Field capacity (ha/h) : 0.022

Field efficiency (per cent) : 63

Draft (N) : 450

Labour requirement (man-h/ha) : 46

Uses:

It performs all functions of country plough with added efficiency and advantages.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer: 63

49
 Bullock Drawn Disc Harrow

Features:

The harrow consists of a frame and shafts on which discs are mounted. The shafts are held in bearings for smooth
rotation of discs. The shafts are called gangs on which discs are arranged and equally spaced with the help of spools.
Single gang and double gang disc harrows are equally popular and operated using a pair of animals. The discs are
fabricated from carbon steels and the cutting edges are hardened. T he harrow is provided with an operator's seat and
also has a transport wheel which aids in easy transportation. The operator's seat enables the operator to ride instead of
walking, which helps in deeper penetration and reduces drudgery.

Specifications:
Number of discs : 4-6-8
Disc diameter (mm) : 400-450
Number of gangs : 1-2
Width of cut (mm) : 800-1200
Depth of cut (mm) : 50-120
Capacity (ha/day) : 1.5-1.75 (8 hrs)
Weight (kg) : 80-120
Power requirement : Pair of bullock

Uses:

It is used for seedbed preparation, cutting and burying of grass and weeds.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer: 3, 59,109,112,307

50
 Animal Drawn Patela Harrow

Features:

The animal drawn patela harrow consists of a heavy batten made of Sal wood having 1500mm length and 100mm
thickness on which a Mild Steel angle frame is fixed by means of screws. The frame carries a bar to which curved and
pointed hooks are attached. The bar can be raised or lowered by means of the lever having a slotted sector to lock its
position. Some models may be up to 2000mm in length. It is secondary tillage

Equipment for clod crushing, stubble or trash collection, levelling and smoothing of land surface before seeding.

Specifications:

Overall Dimensions

- Length (rom) : 1500

- Width (mm) : 230
- Height (mm) : 100
Weight : 65

Working width (mm) : 1500 / 2000

Working depth (mm) : 60

Draft (N) : 600

Operating speed (km/h) : 2.5

Field capacity (ha/h) : 0.3

Field efficiency (%) : 70

Labour requirement (man-h/ha) : 3-4

Uses:

It is secondary tillage equipment and used for breaking of clods, collection of stubble or trash and levelling of the field
surface before the application of seedlings.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer: 63

51
 Bullock Drawn Bund Former

Features:

The implement consists of two blades, flat iron frame bent at an angle a handle attached to the frame with tie bars and
wooden beam. The operator's handle is made of wood for providing better grip and convenience in operation and
attached to the frame with the help of suitable brackets. The frame is bent at an angle and has holes for adjusting the
space between the blades. The profile of blades is made to a shape so that bund fonned is trapezoidal and remains
stable. The blades are attached to the frame with fasteners. For operation, a pair of bullock pulls the implement; the
blades gather the loose soil and accumulate it in the fonn of bund.

Specifications:

Size (mm) : 750-1050

Size of bunds : Adjustable

Capacity (ha/day) : 3-4

Power requirement : A pair of bullocks

Weight (kg) : 25-30

Uses:

It is used for making bunds for irrigation purpose.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer: 63

52
 Power Tiller Mounted Terrace Cum Leveler

Function: For land leveling, terracing and bund forming

Specification:

i. Type : Mounted implement

ii. Power requirement : 8 to 10 hp power tiller

iii. Overall dimensions : 1000 x 780 x 580 mm

iv. Weight : 35 kg

v. Capacity : 0.08 m3 of soil

General Information : The unit consists of 1.0 m wide curved mild steel blade with a steel cutting edge at the
bottom. It is attached to the front of the power tiller with the help of a mounting plate. Two
solid side support arms made of 25 x 12.5 mm mild steel flat holds the unit rigidly during
the operation. The lifting of the blade can be made by tail wheel adjustment of the rotary
tiller while keeping the tilt angle constant. Two side guards are provided to avoid spilling
of soil on both sides of the blade. Bottom skids made of 2 mm mild steel sheet are provided
below the blade for maintaining uniform load.

Cost of the unit : Rs. 4,000/-

Salient features : Simple in design, construction and ease of operation and transport

Efficient for land levelling with a transportation efficiency of 86.6 per cent

Cost of moving 1 m3 of soil to 1 m distance is Rs.3.30. Cost of bund forming is

Rs.17.75/m3 which is comparable with the manual bunding.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer : 68

53
 Bullock Drawn Seed Planter

Function: Line sowing of crops like groundnut, sorghum, cowpea, Bengal gram, green gram, black gram, etc. in

three rows simultaneously.

Specification:

i. Type : Bullock drawn implement

ii. Power requirement : A pair of bullocks, an operator

iii. Overall dimensions : 1080 x 1180 x 925 mm

iv. Weight : 65 kg

v. Capacity : 1 ha / day

General Information : The unit consists of a simple frame on which a seed box, hitch brackets, handle , clutch
mechanism and furrow closer are mounted. The entire units is mounted on two wheels. The
furrow opener is similar to country plough in which adjustable/ replaceable share is
provided. The provision of cup feed mechanism facilities metering of seeds without
breakage. The power to operate the seed metering mechanism is taken from the ground
wheel through clutch. The provision of clutch facilitates to stopping the seed dropping at
head lands. A square bar is provided at the rear to cover the seeds.

Cost of the unit : Rs. 5,000/-

Salient features : The seed to seed distance in a row can be adjusted.
By changing the size of the cup different crops/ varieties of seed can be sown

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer: 69,94,144,149,247,76,104,215,249,206,363,97,5,12,107,145,279,291,317,65,211,165,310,307,356,68

54
 Three Row Seed Cum Fertilizer Drill

Features:

It is a standardised animal drawn seed cum fertiliser drill which is suitable for crops like wheat, gram, sorghum,
soybean, lentil, pea, sunflower, safflower etc. It is simple, light in weight, and compact in construction for drilling
fertiliser and seeds simultaneously especially designed black soil under rain fed condition. It has two gauge wheels,
which are useful for maintaining the depth of operation and also for ease in transportation. Box section frame having
many holes helps in adjusting the row to row spacing at the desired value. Separate knobs are provided for the seed
and fertiliser metering to adjust the rate of application. The fluted roller metering mechanism fitted in the unit, gets the
drive from ground drive wheel of 300mm diameter through chain and sprocket. The shoe type furrow openers with
non-clogging boot place the seed at desired depth.

Specifications:

Overall Dimensions

- Length (mm) : 1000

- Width (mm) : 1000
- Height (mm) : 780
Weight (kg) : 50

Draft (N) : 500

Working width (mm) : 225-700

Operating speed (km/h) : 2 -2.5

Field capacity (ha/h) : 0.10-0.28

Field efficiency (%) : 65-70

Labour requirement (man-h/ha) : 4-10

Uses

It is used to drill seeds and fertiliser simultaneously in two rows.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer: 37,322,245,3,23,36,29,59,88,112,114,123,130,133,153,183,196,209,212,214,237,250,262,269,278,
273,274,275,303,304,334,347,362.

55
 Birsa Animal Drawn Seed Drill

Features

It is a bullock drawn implement suitable for sowing paddy, ragi, wheat, linseed, gram, safflower and other small sized
seeds. In this machine, seeds are dropped by a rubber agitator and slit hole while the fertilizer is dropped manually
using the funnel provided for that purpose. Only the ground wheel drives the agitator for the seeds and a small ridger
type furrow opener is used to reduce the draft on the animal. It saves 56 per cent labour and operating time and 25
percent on cost of operation compared to conventional method of sowing behind country plough. It also results in 14
to 27 per cent increase in yield compared to sowing by conventional method.

Specifications:
Dimensions (l x w x h) (mm) : 850 x 440 x 170
Weight (kg) : 13.5
No. of rows : One
Seed metering : Slit hole and rubber agitator
Fertilizer metering : Manual dropping
Power transmission : Agitator is driven by a ground wheel
Furrow opener : Ridger type
Size of furrow opener (mm) : 136
Power source : A pair of bullocks
Performance results:
Crop Paddy Ragi
Seed rate (kg/ha) 98 10
Width of coverage (mm) 250 300
Depth of placement (mm) 70 60
Operating speed (km/h) 2.9 2.9
Field capacity (ha/h) 0.035 0.034
Seed damage (per cent) 4 7
Draft (N) 376 369
Labour requirement (man-h/ha) 29

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer: 63

56
 Manually Operated Double Wheel Weeder

Features: The double Wheel Weeder is a manually operated weeding machine but with wheels. Easy to operate
wheel weeders doesn’t require any type of training for operations. Offered with a sophisticated looks, these weeders
are known for their functionality that is based on the principle of pull and push operations. Being safe, easy to operate
and environment friendly, these Weeders not only remove the tap root but also the fibrous root system, which cause
much problem for farmers. We are trading this equipment all over the country to help all types of farmer, willing to
increase their yield by killing the weeds that can be a killer to their crops in the field.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer : 204

Manually Operated Single Wheel Weeder

Features:

The Single Wheel Weeder being manufactured by us is the equipment, which is used for very special
purpose when the weeding is required at narrow places or between rows. The blade is thin but very sturdy
and tough besides, it is very safe to use and offers zero threat of hurting to the user. Other than the wheel,
there is nothing mechanical in this single wheel weeder but, it works wonderfully under the condition
where it is put into. This hassle free equipment requires no special maintenance.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer : 204

57
 Manually Operated Seed Dressing Drum

Features: The Seed Dressing Drum being produced by us is very easy to handle and requires no
special technical training to operate it. Besides, it is also very effective and at the same
time economical for farmers. The performance of the machine never gets compromised
despite its manual operations. The quality manufacturing of the machine helps in proper
dressing of the seeds for the benefit of the end user.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer : 204

58
 Power Tiller Operated Boom Sprayer

Function: Line sowing of crops like groundnut, sorghum, cowpea, Bengal gram, green gram, black gram, etc. in

three rows simultaneously.

Specification:

i. Type : For row crop spraying

ii. Power requirement : Power tiller mounted

iii. Overall dimensions : 1550 x 5000 x1550 mm

iv. Weight : 12 kg

v. Capacity : 1 ha / day

General Information : The boom sprayer attachment consists of two aluminum hollow sections (50 x 25 mm) of
4 m length with 16 numbers of nozzles. The nozzles are spaced at 450 mm apart. A
reciprocating pump (40 m x 25 mm) is mounted on the power tiller with the help of a stand.
The drive is transmitted from the clutch pulley of the power tiller through v-belt. A 25 mm
dia. heavy-duty alkathene suction hose carries the spray chemical from the tank kept in the
power tiller trailor to the pump inlet. The delivery line from the outlet of the pump is
divided into two lines by means of a two way cock to each of the two aluminum sections.
The spray boom with nozzles are carried by two persons with a belly rest and neck belt
provisions for easy handling and spraying of chemicals on the crop foliage. A regulator
valve with a by-pass line to the tank is also provided in the delivery line to control the
excess pressure and discharge rate.

Cost of the unit : Rs. 20,000/-

Salient features : Light in weight and easy handling Suitable for spraying in row crops
Results in 55 per cent saving in cost as compared to knapsack power sprayer
List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer : 68

59
 Battery Operated Low Volume Sprayer

Function: For spraying chemicals on crops like paddy, groundnut, pulses and vegetables. It requires 50 liters of

water per hectare.

Specification:

i. Type : Knapsack

ii. Power requirement : 6 V rechargeable batteries

iii. Overall dimensions : 380 x 250 x 725 mm

iv. Weight : 17 kg with pesticide

v. Capacity : 1.5 ha / day

General Information : A 10 liter pesticide tank and a 6 volt rechargeable battery are mounted on a suitable frame
which is carried on the back of the operator. The chemical is taken from the tank to the
spinning disc fitted with the direct current micro motor. A cut-off valve is provided to
regulate the flow. The weight of the modified battery sprayer is about 17kg with pesticide.
The pesticide application rate of the sprayer is 50 liters per hectare.

Cost of the unit : 1,500/-

Salient features : This sprayer is suitable for any crop like paddy groundnut, pulses and vegetables
Repairs and maintenance problems are less
Reduced water requirement

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer : 68

60
 Power Sprayer

Specification

Type : Horizontal Triple Plunger

Plunger Bore×Stroke (Φ×㎜) : 32×28

Revolution (Rpm)
- Spraying : 700
- Irrigation : 1,200
Suction Capacity (ℓ/min)
- Revolution : 47
- Irrigation : 81
Pressure (㎏/㎠)
- Maximum : 40
- Irrigation : 10
- Revolution : 30
Required Output (PS)

- Maximum : 4.5
- Irrigation : 2.5
- Revolution : 3.5

Dimension(L×W×H) (㎜) : 450×285×405

Lubricant Oil Capacity (ℓ) : 1.0
Weight (㎏) : 24.5
V-Pulley Dia.(㎜) : 27(B-2)
Spraying Efficiency (Ha/day) : 8~13

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture : 190

61
 Power-Sprayer

Technical specification:

Function : For Spray in Diff. Crops & Orchards

Coverage : 1 Acre / Hour

Tank Cap. : 250 Liters

Max. Working Pressure : 400 PSI

Length of Delivery Hose : 100 Meters

Special Features:

• Portable, Compact and Light in weight.

• Equipped with 100 mtr. long Delivery Hose and Spray Gun.
• Reel Attachment for easy Winding and Unwinding of delivery hose.
• Light Weight Tank made of LDPE Plastic with capacity of 250 Ltr.
• Tiplex Pump with Stainless Steel Piston and Oil Bath Lubrication.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer : 31, 24

62
 Engine operated power sprayer

Specification

Output capacity (LPM) : 14-22

Prime Mover

- Recommanded : Engine 3.5 to 4 Ps , Motor 1.5 to 2 H.P

Prime Mover used : Single cylinder 4 stroke petrol start kerosene run engine.

Power rating (h.p) : 3.1 h.p at 3600-400 rpm

Capacity (cc) :197

Bore/stroke (mm) :67/56

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer : 179

63
 Battery operated Padgilwar Knapsack sprayer

Specification:

Type : Rechargeable battery operated sprayer

Tank capacity : 15 liter

Pump discharge : 560ml/min

Length of lance : 530mm

Nozzle type : Fixed, hollow cone type

Spray angle of nozzle : 88 deg

Discharge rate of nozzle : 685 ml/min

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture
:85,257,356,143,321,10,356,57,215,260,185,186,19,82,110,119,128,148,252,317,335,352,359,44,17,34,49,
53,91,93,99,111,146,208,222,223,224,225,251,291,336,370,11,26,95,116,217,323, 39,
50,156,329,356,6,7,87

64
 Broadcaster

Function: To broadcast seeds and fertilizers.

Specification:

i. Type : Manually operated

ii. Power requirement : One labour

iii. Overall dimensions : 360 x 510 x 420 mm

iv. Weight : 3.6 kg

v. Capacity : 4 ha / day

General Information : The centrifugal type unit that is hung in front of the operator is used to broadcast
seeds

and granular fertilizers by rotating the handle. The material is put in the hopper in

batches of 3 to 5 kg and the operator has to walk while rotating the handle. The
material

is spread over a 3.5 to 10 m width.

Cost of the unit : Rs. 3,000/-

Salient features : Suitable for broad casting small seeds like sesame, sorghum, etc.

Large area can be sown in less time.

Uniform distribution of seeds.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer : 68

65
 Hand Rotary Duster

Features

The hand rotary duster is available in two models, shoulder mounted and belly mounted. It is a common type of duster
being used by the farmers. The duster consists of a hopper, fan/blower, rigid/flexible discharge pipe, reduction
gearbox, rotating handle, shoulder straps, and metering mechanism. The hopper is either made of plastic or aluminum.
The hopper made from mild steel sheet is coated with anti-corrosive material for longer life. The duster has
mechanical agitator connected to the gearbox placed in the hopper, which chums the chemical and prevent clogging of
the outlet. The adjustable orifice plate mounted below the hopper outlet controls the application rate. The fan/blower
is enclosed in the casing and is rotated with the handle through gearbox. For operation, the hopper is filled 1/2 to 3/4th
of the capacity of the hopper. This is mounted on the shoulder/belly with the help of adjustable straps. The discharge
pipe fitted with spoon type deflector is directed towards the target continuously rotating the handle. The chemical in
dust/powder form drops from the hopper in the discharge pipe having an air stream created by the blower. These dust
particles emerging in, the form of cloud from the discharge pipe is carried to the plant where these settle on the leaves,
stems and other parts.

Specifications

Overall length (mm) : 280

Overall width (mm) : 330

Overall height (mm) : 330

Weight (kg) : 3.5

Hopper capacity (1) :5

Field capacity (ha/ day) : 0.6 (for field crops)

Uses

For control of pests and diseases by use of chemicals in the dust forms in nursery, vegetable gardens, field
crops, tea and coffee plantations, green houses, glasshouses and godowns.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer: 335, 63, 53, 91, 116, 366

66
 Power Reaper

Specification:
(i) Engine
Power : 4-6HP /
Type : Diesel Start
Displacement : 300-400 cc
Fuel Tank Capacity : 4.5 Liter
Overall Dimensions
- Length : 2460 mm
- Width : 1400 mm
- Hight : 1100 mm
Weight : 230 Kg
(ii) Travel
Travel Speeds : 3.0 kmph
Type of Wheel : Rubber Tyre
Width of Wheel : 500 x 12
(iii) Reaping (Cutting)
Cutting Device : Cutter Bar
Crop Release : 40-50 cm
Cutting width : 1200 mm

(iv) Reaping Efficiency

Working Capacity : 5 to 6 Acers / Day
Efficiency : 600 - 1350mm
Cutting Height : Right Side

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer : 204, 11

67
 Vertical Conveyor Reaper

Specification:

Dimensions (l x w x h), (mm) : 2570 x 1850 x 1250

Weight (kg) : 85

Number crop dividers :6

Type of cutting unit : Cutter bar with serrated V-shaped blades

Power source : 8-10 hp

Capacity (ha/h) : 0.20-0.40

Cost (Rs) : 1, 00,000

Uses : It is used for harvesting and windrowing of erect rice crop

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer : 57, 31, 142, 2, 18, 113, 136, 135, 195, 367, 364, 157, 181, 82, 92, 268, 293, 355, 47, 44,
158, 159, 162, 235, 324, 111, 42, 100, 228, 242, 338, 350, 356, 90, 32.

68
 Reaper Binder

Specification:

Overall dimensions : 3600×1850×1200 mm

Cutting width : 1220 mm

Cutting height : 50 – 70 mm

Rope requirement : 1 spool/acre

Engine : 10.2 hp, Air-cooled, Diesel engine.

Fuel consumption : 1 Lit/hr

Working Capacity : 0.4 ha/ hr

Cost (Rs) : 2, 50,000

Uses : Harvesting & binding of grain crops on single operation. It is useful for

Wheat, Paddy, Oats, Barley & other grain crops height up to 85 to 110 cm.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer : 31

69
 Fodder Harvester

Specification

Sr. No Parameter ObservationSpecifications

Type : Self propelled Fodder harvester

Nominal Size (mm) : 1440

Track width (mm) : 1030
Wheel base (mm) : 1400
(i) Engine
No.of cylinders : One
Cubic capacity (cc) : 454
Rated engine speed (rpm) : 3000
(ii) Lab. Performance Result
Specific Fuel Consumption, g/kwh : 295(217)
(g/hph)
Max. Power : 7.38 kw (10.03Ps)
Area Covered, Barley harvesting : 0.255 to 0.432 ha/h
Berseem harvesting : 0.197 to 0.287 ha/h
Fuel consumption per unit area : 2.11 to 4.29 l/ha.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer: 31

70
 Pedal Operated Thresher

Features

It consists of wire-loop type threshing cylinder, power transmission system, mild steel sheet body and foot pedal. The
threshing cylinder consists of wire-loops of ‘U’ shape embedded in wooden or metallic strips joined to two discs. A
shaft carries the threshing cylinder and is connected to the transmission system. The transmission system consists of
meshed gears or sprocket-chain mechanism. T he larger gear or sprocket is connected to foot pedal/bar with links. The
foot pedal/bar is always in raised position. On pressing the pedal the threshing cylinder starts rotating. For continuous
rotation of the cylinder, the pedal is lowered and raised repeatedly. For operation, paddy bundle is held in hands and
earhead portion of the crop is placed on the rotating cylinder. The wire-loops hit the earheads and grain get detached
from the rest of the crop.
Specifications
Dimensions (lxwxh) (mm) : 1250 x 650 x 630
Cylinder size (mm) : 400 diameter x 600 length
Loop wire diameter (mm) :4
Number of wire loops : 144
Number of wire loop strips : 12
Transmission system : Pedal C rank mechanism with 1:4 gear ratio
Power source : One person
Weight (kg) : 36
Performance results
Crop : Rice
Broken grains (per cent) : Nil
Total grain losses (percent) : 1.2
Threshing efficiency (per cent) : 98.8
Output capacity (kg/h) : 44
Labour requirement ( man-h/q) : 5.0

Uses
It is used for threshing rice crop.
List of Manufacturers: Please refer to Page-222-248 as per following
Manufacturer : 63

71
 Multicrop Thresher

Main Crop : Paddy

Other crops : Sunflower, Maize, Jowar, Bajra, Ragi, Wheat etc.
Prime-mover Type : Four stroke diesel engine/Electric engine
Frame Dimensions (mm) : 2340 x 860 x 1120
Type of Crop feeding system : Rectangular
Size of feeding hopper (mm) : 3360 x 860
Feeding System :
- Size of platform (mm) : 30 x 30 x 4.5
- Height of feeding chute from G.L. : 1760
Threshing Cylinder
Type : Rasp bar, closed
Size of cylinder (mm) : 735 x 470ø
Size of rasp bar : 735 x 50 x 22.53
Nominal Dia of cylinder (mm) : 470
Width of cylinder : 735
Main shaft
Material & size (mm) : MS bar, 1370 x 42.3 ø
No. type of bearings on shaft : Two, Ball bearings
Concave
Peripheral length (mm) : 740
Effective length (mm) : 720
Peripheral width (mm) : 580
Effective width (mm) : 470
Effective area (sq. M) : 0.338
Concavity (mm) : 140
No. of sieves : Three
Blower
No. of blower : One
Type : Rectangular blades
Engine
No.of cylinders : One
Lab. Performance Result
Power requirement : 4.2 to 5.7 kw/h
Hourly Fuel Consumption : 1.96 to 1.50 l/h
Cleaning efficiency : 93.90 % to 95.47 %

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer: 177, 86, 257, 14, 75, 187, 258, 276, 97, 223, 310, 286, 151, 285, 350.

72
 Portable Pump sets

Technical specification

Model Garuda : 3PW1000

Engine Power : 5 hp

Fuel : L.P.G.

Max. Discharge, Lit./min. : 1000

Max. Head, Mtr. : 30

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer : 239

73
 Power Tiller Operated Axial Flow Pump

Function: To lift water from open water sources

Specification:

i. Type : Axial flow type

ii. Power requirement : 8 -10 hp power tiller

iii. Overall dimensions : 300 x 750 x 620 mm

iv. Weight : 26 kg

v. Capacity : 2500 litres per minute at 3.0 m head

General Information : The unit consists of a specially designed axial flow impeller which is secured to a pump
shaft and encased inside a 19 cm diameter mild steel discharge tube .The impeller has two
mild steel sheet-metal vanes welded to a threaded hub and has an average pitch of 20
degree. The impeller shaft runs in a long nylon bearing housed in mild steel tube which is
welded to the pump assembly at an inclination of 30 degree. The pump can be coupled to
the power tiller engine pulley through a flexible shaft supported by a frame near the power
tiller engine and it is aligned perfectly by fixing the pump in desired position through
hinge and adjustable frame. Behind the axial flow impeller is a set of diffusion vanes which
serve to straighten the spiral flow from the impeller for improved efficiency.

Cost of the unit : Rs. 10,000/-

Salient features : Highly suitable for lifting water from open water sources
Capacity is 2 to 3 times higher than that of centrifugal pumps for lifts between 1.0 and
3.0 meters and hence high efficiency at lower lifts

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer : 207, 312, 356, 90, 87, 256, 13, 57, 102, 221, 348, 325, 68

74
 Roto Seeder

Specification:
Overall dimensions
Overall width (Inch0 : 70
Working width (inch) : 55
Weight
Hitch Type : Category 1 & 2
Hp Required : 40-45 HP
Gear Box Option : Multi Speed
Side Transmission : Chain Drive
Working Depth :2” (5 cm)/ 6” (15cm)
No. of Flanges :6
No. of Blades : 36
PTO Speed : 540/1000 rpm
Seed Capacity (kg) : 58
Fertilizer Capacity (kg) : 60
Seed Fertilizer Distribution : Broadcasting
Seed Fertilizer Metering Device: Broadcasting
Ground Wheel : One 24” Diameter spiked roller with spring to maintain with spring maintain contact
with ground

Benefits:
1. Saves working time and slashes fuel costs.
2. Can be operated either in wet or dry soil conditions for preparing seed bed.
3. Improves soil health.
4. Provides perfect tilth.
5. Improves productivity and yield.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer: 341

75
 Bund Forming Machine:

Features:

The Bund Former will strengthen the existing bund without damaging the height of the bed by adding on
the sideways. This machine is suitable for both dry and wet conditions. The power required to operate this machine
is about 40-50hp with 540rpm at PTO. The height of the bund is 25-30 cm.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture: 80

76
 STONE BURIER

Features:

1. Tractor operated Stone Burier is useful for both wet and field condition
2. This is an ideal machine for soil preparation for perfect seed bed, both for flat field crops (grass, turf) and
for crops planting in beds. (Vegetables, etc.)
3. This is a genuine one-pass machine burying the small stones/ pebbles, residues of the previous crop.
4. The rubber top helps to avoid soil sticking and gives trouble free longer life.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture: 80

77
 POWER HARROW

Features:

• Highly useful for horticultural farms, green house cultivation and hi-tech gardening.

• Equipped with rear cage rollers

• Working depth is adjustable

• Side guard are easily adjustable in relation with size working depth

• Equipped with 540rpm gearbox

• Blade size- 250X 10 mm

Specifications:
Working width (m) 1.0
Transport width (m) 1.12
Power Requirement (Hp) 40-80
Number of Blades 8
Weight without cage roller (Kg) 275
Weight with cage roller (Kg) 320
List of Manufacturers: Please refer to Page-222-248 as per following
Manufacture: 80

78
 CENTRIFUGAL PUMP

Specification:

Pump Size: 2.5” x 2.5” & 3” x 2.5”

Discharge: 9 to 49 lps

Head range: 21 to 29 Mtrs

High Head: 3000 to 10000 feet

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture: 57

79
 HORTICULTURE SPRAYER

Features:

30 to 40 feet height Covered with H. T. P. Pumps Enable Spray for Apple, Mango and
Chiku etc.

Specification:

Diesel Consumption: 0.75 Ltr. / Hour (Approx.)

Capacity: 2 Gun will be used at a time

Tank: 200 Ltr

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture: 57

80
 Oil seeds –Machinery
S.N Name of Machinery for Oil seeds Page.No
1 Hand Operated Oil expeller 82
2 Oil Expeller/Screw Presses 83
3 Cold Screw Presses 84
4 Oil Presses 85
5 Animal Drawn Mustard Oil 86
6 Rotary Dibbler 87
7 Manual Oil seed Drill 88
8 Power tiller Drawn Seed Cum Fertilizer Drill 89
9 Manual garlic Planter 90
10 Self Propelled Power weeder 91
11 Wheel Hoe 92
12 Knapsack Power sprayer 93
13 Self Propelled Light Weight Boom Sprayer 94
14 Engine operated Power Sprayer 95
15 Battery Operated Power Sprayer 96
16 Battery operated Padgilwar Knapsack Sprayer 97
17 Sun Flower thresher 98
18 Multi Crop Thresher 99
19 Sun Flower thresher 100
20 Soyabean Reaper 101
21 Vertical Conveyor Reaper 102
22 Self Propelled Riding Type Reaper 103
23 Soyabean Blanching Unit 104

81
 Hand operated oil Expeller

Suitable for extracting of Oil from the groundnut, Sesame, Sunflower

Capacity: 2 - 3 Kg/Hr

Manually operated Sieve Grader

Suitable for grading out Rice, Cereals, Coffee, Sand, Ground Powder etc.,

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture: 83

82
 OIL EXPELLERS / SCREW PRESSES

The use of machines like Screw Presses or Oil Expellers was started for expelling or extracting
oil from oil seeds and nuts. Oil Expellers play a very vital role in the oil extraction process. A
Screw Press is a mechanical machine that is used to press or crush oil seeds in order to extract
the oil content from it. There are two types of Oil Screw Presses or Expellers, which are namely
as follows:

• Full Press Expellers

• Pre Press Expellers.

The machines uses pressure and friction from the screw drives to move as well as to
compress the oil seeds. The oil that is expelled then seeps through the small openings. These
openings are very small which prevents any kind of solid material or residue from the seeds to
mix with the extracted oil. The waste or solid residue from the seeds exits from the other end of
the expeller. This leftover residue is also known as oil cakes.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture: 105

83
 COLD SCREW PRESSES

Cold pressing or cold milling generally means that no extra heat is applied while pressing
or crushing oil seeds.The heat that is applied to execute the process through friction only. Cold
pressing does not mean pressing the seeds without any heat, as oil extraction cannot be done
without the use of heat. Heat makes oil run out of the seeds in a faster manner. In fact, it is hard
to find oils that are pressed without heat.

• Cold Screw Presses is equipment that is used for the extraction of oil.
• There are ample numbers of high quality Cold Screw Press Expellers that available in the market
today.
• The lowest temperature that is applied in small expeller presses is around 50°C.
• Although, the heat in the presses increase due to friction during the expelling process.

Advantages:

• They provide a high oil yield

• There is a low content of residual oil in the oil cakes.
• The pressed oil is light in colour and is of a rich quality.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture: 105

84
 Oil Presses

Our oil presses are widely used for processing various oil bearing materials like
rapeseeds, cotton seeds, soybeans, peanuts, sesames, sunflowers, tung seeds as well as using for
rice bran, corn embryo and powered oil materials and safflower and other wild plant oil
materials.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture: 105

85
 Animal Drawn Mustard Drill

Features

It is an animal drawn implement suitable for sowing rapeseed mustard, wheat and pearl- millet. This implement uses
a rotor with cells on its periphery to meter the small seeds. Power from the ground wheel is transmitted by the chain
and sprocket mechanism to the bottom of the hopper to activate the rotor. It has three bottoms and the row to row
spacing can be easily adjusted for different crops. One additional idler helps in keeping the implement level and for
depth control. It saves 50 percent labour and operating time and 51 percent on cost of operation and also results in
15-20 percent increase in yield compared to conventional method of sowing behind country plough.

Specifications
Dimensions (lxwxh) (mm) : 1000 x 900 x 450
Weight (kg) : 40
No. of rows : Three
Seed metering : Rotor with cells
Power transmission : From ground wheels
Furrow opener : Shoe type
Performance results
Seed rate (kg/ha) : 1.5
Depth of seed placement (mm) : 50 -60
Field capacity (ha/h) : 0.2
Field efficiency (per cent) : 65 - 70
Plants/m, length of row :6
Draft (N) : 320
Labour requirement (man-h/ha) :5
Uses: It is suitable for sowing rapeseed mustard, wheat and pearl-millet.
List of Manufacturers: Please refer to Page-222-248 as per following
Manufacturer : 63

86
 Rotary Dibbler

Features:

The rotary dibbler is a manually operated push type device for dibbling of medium and bold size seeds. It
consists of a rotating dibbling head with penetrating jaws, covering-cum-transport wheel, seed hopper
with cell type wooden roller and a handle. Except seed roller, which is made of good quality wood, all the
other parts are fabricated from mild steel. The number of jaws varies from five to eight among various
designs, depending upon seed to seed distance. For its operation, the hopper is filled with seeds and
transport-cum covering wheel is drawn to rear side. The dibbler is then pushed forward in the direction of
travel with covering cum transport wheel behind the dibbling head. The jaws penetrate into the soil and
automatically drop the seeds. The seed to seed distance depends upon size of the polygon plate to which
jaws are attached. 21.5 Jaw type 225 0.6 to 1.027.

Specifications:
Seed metering : Cell type wooden roller, six cells
Weight (kg) : 21.5
Seed placement device : Jaw type
Jaw spacing (mm) : 225
Capacity (ha/day) : 0.6 to 1.027
Labour requirement (man-h/ha) : 27

Uses
For sowing of medium and bold vegetable and other cereal seeds.
List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer : 63

87
 Manual Oilseed Drill

Features:
The machine consists of a seed box attached to the main frame of a hand wheel hoe. A fluted roller
assembly is provided at the bottom of the seed box. Fluted roller is rotated with the help of chain and
sprockets from the ground wheel. The seed rate can be adjusted with the help of a lever provided on the
seed box. The fluted roller used for sowing rapeseed and mustard has 8 flutes. Each flute is 3 mm wide
and 2 mm deep. The diameter of the fluted roller is 50 mm and its length, 32mm. For operation, the
machine is pulled by rope attached to the hook of machine by one man and other person steers the
machine by holding it by the handle.

Specifications:

Length (mm) : 1270

Width (mm) : 520
Height (mm) : 1000
Crops for which machine is adaptable : Rapeseed & Mustard
Seeding mechanism : Fluted roller with narrow flutes
Power transmission : Through chain and sprocket
Hopper capacity (kg) :2
Number of rows : One
Furrow opener : Shovel type
Weight (kg) : 9.0

Uses:
Manual oilseed drills are used for sowing rapeseed and mustard. B y changing the fluted roller position,
other crops like wheat, moong etc. can also be sown. It is also suitable for inter-row sowing

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer: 63

88
 Power Tiller Drawn Seed cum Fertilizer Drill

Features:
This machine has been specially designed for operation with a power tiller of 8-10 hp to drill seed and
fertilizer in 6 rows. It is provided with depth control gauge wheels and a ground wheel for operating the
metering mechanism. Some of its major components are the main frame, seed and fertilizer boxes,
metering mechanism, transport wheel, furrow openers, hitch system etc. It is suitable for sowing seeds of
wheat, soybean, Bengal gram, sorghum etc in medium and heavy soil.
Specifications
Overall Dimensions
- Length (mrn) : 1650
- Width (mm) : 1510
- Height (mrn) : 1130
Weight (kg) : 120
Draft (N) : 675
Working width (mm) : 1000-1200
Working depth (mm) : 40-70
Operating speed (krn/h) :2-3
Field capacity (ha/h) : 0.20 – 0.25
Field efficiency (%) : 50 - 60
Labour requirement (man-h/ha) : 4-5
Fuel consumption (l/h) : 11
Uses:
It is used for drilling seeds and fertilizer in six rows.
List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer: 37, 322, 245, 3, 23, 36, 29, 59, 88, 112, 114, 123, 130, 133, 153, 183, 196, 209,
212, 214, 237, 250, 262, 269, 278, 273, 274, 275, 303, 304, 334, 347, 362

89
 Manual garlic planter

Features:
This is a hand wheel hoe, used for inter-culture operation on which planting mechanism is mounted. The
planting mechanism consists of a vertical plate with spoons, and receives drive motion from the ground
wheel through chain and sprockets. For operation of the planter, a person pulls it from rope attached to the
hook and other person steers the machine by holding it by the handle. Upon pulling the planter forward,
ground wheel .starts rotating transmitting motion to the vertical plate fitted with spoons in the hopper.
The hopper is filled with seeds or garlic cloves. As the vertical plate rotates, the spoons pick up the
bulb/seed, which is discharged, in the small hopper connected to the furrow opener through a tube. The
seed is then dropped in the furrow created by the furrow opener. It is provided with markers for
maintaining the row-to-row spacing. Varying the number of spoons on vertical plate can vary plant
spacing. Plantings spoons for other crops like pea, sunflower, cotton, okra (bhindl), maize, and soybean
are also available.

Specifications:
Length (rnm) : 1070
Width (rnm) : 460
Height (rnm) : 1100
Number of rows : One
Capacity of seed box (kg) :3
Seed metering mechanism : Vertical disc with spoons
Number of spoons on the plate : 12 (for garlic)
Shape of spoon : Elongated cavity, 'c' shape
Power transmission : Through chain and sprocket
Depth of planting (rnm) : 10-20
Type of furrow openers : Shovel type
Machine weight (kg) : 14.0
Uses:
This planter is used for sowing of garlic, maize, moong, peas, groundnut etc. Garlic planter is laboure
saving equipment and requires 90 man-hours to plant one hectare.

Manufacturer : 63

90
 Self-Propelled Power Weeder

Features

The self-propelled weeder consists of a box section chassis, 3-hp petrol -start- kerosene run engine, transmission
system, drive wheels, tool mounting bar of 70 x 70 mm size. The engine, gearbox and tool mounting bar are fixed to
main chassis. The engine is mounted on front side of the chassis on proper foundation. The gearbox with
transmission system is mounted in the middle of chassis. Two steel lugged drive wheels of 500 mm diameter and
110 mm width are mounted on both ends of hexagonal shaft connected to transmission box. The wheel tread
(spacing between two wheels) can be adjusted from 400 to 650 mm to suit the row-to-row spacing of different crops.
The V -shaped weeding sweeps of 150 and 200 mm size are fitted on tynes. These tynes are mounted on the tool bar
with clamps. The tynes are raised or lowered for adjusting the depth of operation and locked in position by the
clamp. The spacing between sweeps is easily adjusted by sliding the tynes on tool mounting bar to suit the crop row
spacing. Power from engine is transmitted to gearbox through V –belt and pulleys. Inside the transmission box
power is transmitted through chain and sprockets to two hexagonal drive shafts/ axles. A lever operated clutch idler
pulley is used for tightening loosening of V -belt, transmitting the power from engine to transmission box. For
operation, the tynes are adjusted to the raised position so they do not dig into the ground and the weeder is
transported to the field. The tynes are adjusted according to the row spacing of the crop and depth of operation.

Specifications

Overall dimensions (mm) : 2300 x 1000 x850

Engine : 3 hp petrol- start- kerosene-run
Chassis : 70 x70 mm box section chassis
Wheels : Two steel lugged drive wheels of 500 mm diameter and
Performance Results
Weeding Efficiency (%) : 65-70
Field capacity (ha/h) : 0.15
Field efficiency (%) : 60 to 70
Fuel Consumption (l/h) : 0.70
Uses:
The CIAE self-propelled Power weeder is suitable for weeding and intercultural operations in upland row crops like
groundnut, maize, soybean, pigeon pea, etc. sown at row-to-row spacing of more than 30 cm.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer: 82, 252, 34, 62, 111, 263, 11, 35, 155, 156, 350, 326, 194.

91
 Wheel Hoe

Features:

The wheel hoe is a widely accepted weeding tool for weeding and intercultural in row crops. It is a long handled
tools operated by push and pull action. As the name implies, the general construction of wheel hoe comprises of
wheel assembly, miniature tool frame, a set of replaceable tools and handle assembly. The number of wheel varies
from one to two and the diameter depends upon the design. The frame has got a provision to accommodate different
types of soil working tools such as straight blade, reversible blades, sweeps, V -blade, tine cultivator, pronged hoe,
miniature furrower, spike harrow (rake) etc. which can be operated by a single person. The handle assembly has a
provision to adjust the height of the handle to suit the operator. All the soil working components of the tool are made
from medium carbon steel and hardened to 40-45 HRC. The other assemblies of the wheel hoe are made from
structural mild steel and thin walled mild steel pipes. The working depth of the tool can be adjusted with the help of
clamp or through the plate with multiple holes provided in the frame and welded to the tool assembly. The handle
height is also adjustable. Some of the designs are provided with a pulling ring in the frame, which enables it to be
operated by two persons. For operation, the working depth of the tool and handle height is adjusted and the wheel
hoe is operated by repeated push- pull action which allows the soil working components to penetrate into the soil
and cut/uproot the weeds in between the crop rows. With this action, the weeds also get buried in the soil.

Specifications:
The wheel hoes are available in various designs and sizes and the general specifications are:
Overall length (mm) : 1400- 1500
Overall width (mm) : 450- 500
Overall height (mm) : 800- 1000
Number of tynes : 3 Nos
Wheel diameter (mm) : 200- 600
Working depth (mm) : Upto 60
Weight (kg) : 4- 12
Uses:
For weeding and interculture of vegetables and other crops sown in rows.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer: 63

92
 Knapsack Power Sprayer

Features

The pump adopts horizontal gear driving. It is powerful and stable in pressure. As it is oil-soaking type, the
lubricating effect of crank box is positive. It adopts double cylinder pump, which raises operational efficiency. The
piston is heat treated and wear resistant. Packing adopts special materials so it is durable. The engine has electronic
ignition, which is easy to be operated and maintained. Its engine has high power to weight ratio. It uses gasoline as a
fuel and produces one power stroke for each 1800 of crank rotation. Pressure is controlled by oil valve; spraying
pressure is changeable freely and up to 30 kgf/cm2. Its structure is rigid; materials are excellent and easy to be
maintained.

Specification
Length (mm) : 650
Width (mm) : 450
Height (mm) : 570
Weight (kg) : 9.8
Number of gangs :2
Plunger : 1 No. (Double acting)
Cylinder : 2 Nos.
Diameter of plunger (mm) : 16
Stroke (mm) :8
Spraying volume (liters) : 4.8 – 5.2
Pressure (kg/cm2) : 20 – 25

Uses
It is suitable for spraying pesticides and fungicides on rice, fruits and vegetable crops.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer : 24

93
 Self-Propelled Light Weight Boom Sprayer

Features

The machine is operated by 5 hp diesel engine and is controlled by the operator from the handle. The machine
consists of a lightweight power tiller unit and a spraying unit. Spray pump and two narrow pneumatic wheels get
power from the engine through gears, chains and sprockets. One caster wheel is also provided at the rear, which acts
as supporting wheel. The spray boom is mounted on the power unit through a canopy frame.

Specifications

Power required (hp) : 4.8, diesel engine

Engine speed (rpm) : 2600
Type of pump : Roller type
Ground clearance (mm) : 500
Boom height (mm) : 600 – 1300
Number of nozzles : 12
Type of nozzles : Flat fan/any other
Nozzle spacing (mm) : 500
Tank capacity (I) : 100
Pump speed (rpm) : 1600
Swath (mm) : 6300
Wheel diameter (mm) : 440
Tread width (mm) : 920
Weight, (kg) : 208

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer : 63

94
 Engine operated power sprayer

Specification:

Output capacity (LPM) : 14-22

Prime Mover

Recommended : Engine 3.5 to 4 Ps , Motor 1.5 to 2 H.P

Prime Mover used : Single cylinder 4 stroke petrol start kerosene run engine.

Power rating (h.p) : 3.1 h.p at 3600-400 rpm

Capacity (cc) :197

Bore/stroke (mm) :67/56

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer : 179

95
 Battery operated Power sprayer

Make : Jet stream

Prime mover
Prime mover used : D.C. motor
Power rating (v) : 12 V DC, 10 Amp
Power Source : Battery 12 volt, 13 plates
Tank capacity (lit) : 370
Nozzle
Type : Hollow cone
Nozzle discharge (lit/min) : 0.46 to 0.91 at 1 to 4 bar pressure
Spray angle : 52
Overall dimensions (mm)
Length (with hose) : 4950
Length (without hose) : 2600
Width (mm) : 3620
Track width : 1410
Application/area of use : spraying of insecticides and pesticides
Height of jet throws (mm) : 6930

Details of prime mover

Type : Single cylinder, four strokes, Air cooled, spark ignition, petrol Engine.
Make : Yamaha
Max power (Kw) : 2.99@2824
Cylinder:
No. of cylinder : one
Bore/stroke (mm) : 66.0/50.0
Capacity cc : 171
Field performance data
Avg. Depth : 3.7 to 5.6 cm
Avg. Speed : 2.15 to2.49 Kmph
Avg. Area : 0.15-0.21 ha/hr
Fuel consumption l/hr : 0.70-0.82
l/ha : 3.81 -5.84
Avg. Spacing betn rows : 28.7 -29.9cm

96
 Battery operated Padgilwar Knapsack sprayer

Specification

Type : Rechargable battery operated sprayer

Tank capacity : 15 litre

Pump discharge : 560ml/min

Length of lance : 530mm

Nozzle type : Fixed, hollow cone type

Spray angle of nozzle : 88 deg

Discharge rate of nozzle : 685 ml/min

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture : 85,257,356,143,321,10,356,57,215,260,185,186,19,82,110,119,128,148,252,
317,335,352,359,44,17,34,49,53,91,93,99,111,146,208,222,223,224,225,251,291,336,370,11,26,95,116,217,323, 39,
50,156,329,356,6,7,87

97
 SUNFLOWER THRESHER

Features

It is a pedal operated hold on type sunflower thresher suitable for separating seeds from sunflower heads. It consists
of a threshing wheel having spokes and a blower fan operated by foot pedal through chain and sprocket. Four
persons hold sunflower heads on the threshing wheel through holes provided in the cover. It saves 50 percent labour
and operating time and 33 percent on cost of operation compared to conventional method of manual beating.

Specifications
Dimensions (lxwxh) (mrn) :1170 x 1050 x 660
Threshing wheel dia (mrn) : 635
Number of spokes : 50
Power source : One person for drive
Weight (kg)
: 50
Performance results
Crop : Sunflower heads
Cylinder speed (rev/min) : 166
Broken grain (per cent) : Nil
Total grain losses (per cent) : 3.41
Threshing efficiency (per cent) : 100
Cleaning efficiency (per cent) : 95
Output capacity (kg/h) : 40 (with 4 persons)
Labour requirement (man-h/q) : 10

Uses

It is a used for separating seeds from sunflower heads.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer: 2, 18, 113, 135, 195, 367, 364.

98
 Multicrop Thresher

Main Crop : Paddy

ther crops : Sunflower, Maize, Jowar, Bajra, Ragi, Wheat etc.
Prime-mover Type : Four stroke diesel engine/Electric engine
Frame Dimensions (mm) : 2340 x 860 x 1120
Type of Crop feeding system : Rectangular
Size of feeding hopper (mm) : 3360 x 860
Feeding System :
- Size of platform (mm) : 30 x 30 x 4.5
- Height of feeding chute from G.L. : 1760
Threshing Cylinder
Type : Rasp bar, closed
Size of cylinder (mm) : 735 x 470ø
Size of rasp bar : 735 x 50 x 22.53
Nominal Dia of cylinder (mm) : 470
Width of cylinder : 735

Main shaft
Material & size (mm) : MS bar, 1370 x 42.3 ø
No. type of bearings on shaft : Two, Ball bearings
Concave
Peripheral length (mm) : 740
Effective length (mm) : 720
Peripheral width (mm) : 580
Effective width (mm) : 470
Effective area (sq. M) : 0.338
Concavity (mm) : 140
No. of sieves : Three
Blower
No. of blower : One
Type : Rectangular blades
Performance Result
Power requirement : 4.2 to 5.7 kw/h
Hourly Fuel Consumption : 1.96 to 1.50 l/h
Cleaning efficiency : 93.90 % to 95.47 %

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture: 177

99
 Sunflower Thresher

Specifications
Type : Stationary, Power operated
Size of thresher : 690 x 207 ɸ
Type of prime-mover : Three phase, 3.75 kw (5 hp), electric motor
Speed (rpm) : 1440
Prime mover shaft dia. (mm) : 28
Type of pulley & dia. : B-Section, V-groove 100 mm ɸ
Type of Drive : V-Belt (B-92) and pulley
Frame Dimensions (mm) : 50 x 50 x 6.6
Hopper
- Type : Free flow trapezoidal hopper
- Size (mm) : 505 x 505
- Height (mm) : 405
Feeding Hopper
- Type : Rectangular
- Size(mm) : 250 x 170
Threshing Cylinder
Type : Peg tooth type
Size of cylinder (mm) : 690 x 207 ɸ
Threshing cylinder speed :
- Rotational (rpm) : 475 - 490
- Peripheral (m/s) : 5.15 – 5.31

No. type of bearings on shaft : Two, Ball bearings

Concave
Length (mm) : 750
Effective length (mm) : 680
Effective curved width (mm) : 340
Lab. Performance Result
Cleaning efficiency : 78.68 %
Threshing efficiency : 99.83 %
Power Requirement : 1.1 to 2.08 kwh

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture: 4

100
 Soybean Reaper

Features

The power tiller operated soybean reaper is a walk I behind equipment suitable for harvesting rice, wheat soybean
and other thin-stemmed crops. The prime mover is a standard power tiller of 8-10 hp and the reaper unit is mounted
in the front. Crop gathering is by means of a standard reel and the cutter bar is at the front with a loading platform
for the cut crop. A flat belt moves over the platform to convey the crop to one side of the machine. The reaper
consists of cutter bar, reel, platform, and gauge roller; hitch plate, power transmission system, dog clutch and
mainframe.

Specifications

Overall Dimensions
- Length (mm) : 1350
- Width (mm) : 1510
- Height (mm) : 1090
Weight (kg) : 120
Cutting width (mm) : 1200
Operating speed (km/h) : 1.4-1.8
Total grain losses (%) : 2-4
Field capacity (ha/h) : 0.09-0.122
Fuel consumption (l/h) : 0.6
Field efficiency (%) : 74
Labour requirement (man-h/ha) : 20

Uses

It is used basically for the harvesting of soybean crop. It can also be used for harvesting of other bushy crops.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer : 63

101
 Vertical Conveyor Reaper

Features

It is an engine operated, walk behind type harvester suitable for harvesting and windrowing cereals'-& oilseed crops.
The reaper consists of engine, power transmission box, lugged wheels, cutter bar, crop row dividers, conveyor belts
with lugs, star wheels, operating controls and a sturdy frame. The engine power is transmitted to cutter bar and
conveyor belts through belt pulleys. During forward motion of the reaper, crop row dividers divide the crop, which
come in contact with cutter bar, where shearing of crop stems takes place. The cut crop is conveyed to one side of
the machine by the conveyor belt fitted with lugs and is windrowed in the field. The crop is bundled manually and
transported to threshing yard.

Specifications
Dimensions (l x w x h) (mm) : 2450 x 1200 x 1000
Weight (kg) : 145
Number of crop dividers :4
Length of cutter bar (mm) : 1000
Cutter bar pitch (mm) : 75
Number of strokes/min : 700 (0.8 m/s average speed)
Power source (hp) : 5, diesel engine
Performance results
Crop : Soybean
Width of cut (mm) : 927
Operating speed (km/h) : 3.18 – 3.39
Field capacity (ha/h) : 0.21
Field efficiency (per cent) : 65
Total grain losses (per cent) : 3.4
Fuel consumption (l/h) : 0.74
Labour requirement (man-h/ha) : 13

Uses
Used for harvesting and windrowing cereals and oilseed crops.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer : 63

102
 Self-Propelled Riding Type Reaper

Features

The riding type vertical conveyor reaper is a self-propelled unit in which the operator rides on the machine. Drive is
by means of two large pneumatic wheels and steering is by rear idlers. The prime mover is a 6 hp diesel engine.
Convenient clutch, break, steering, hydraulic system and simple power transmission are provided for ease of
operation. It consists of crop row divider star wheel cutter bar (76.2 mm), conveyor belt and wire spring etc. This
reaper has two forward and one reverse speed.

Specifications

Overall Dimensions
- Length (mm) : 3185
- Width (mm) : 1900
- Height (rom) : 1450
Weight (kg) : 1530
Operating speed (km/h) : 3.0 – 3.5
Total grain losses (%) : 5.0 – 5.9
Field capacity (ha/h) : 0.25 – 0.30
Fuel consumption (lib) : 0.90 – 1.15
Field efficiency (%) : 60 – 70
Labour requirement (man-h/ha) :5–6

Uses

It is suitable for harvesting rice, wheat, soybean and other cereals and oilseeds.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer: 57, 31, 142, 2, 18, 113, 136, 135, 195, 367, 364, 157, 181, 82, 92, 268, 293, 355, 47, 44, 158, 159,
162, 235, 324, 111, 42, 100, 228, 242, 338, 350, 356, 90, 32.

103
 Soybean Blanching Unit

Features

Blanching of soybean is carried out to remove anti-nutritional ingredients. It is essentially a water heater with the
provision for inserting and removing the containers of soybean. It has a central cylinder through which the hot flue
gases pass to heat the water, which is stored in a concentric outer cylinder. The outer cylinder is insulated with
asbestos rope to conserve heat. Soybean is placed in stainless steel perforated cages and immersed in the hot water.
It consists of central heating cylinder, outer cylinder, asbestos rope insulation, stainless steel perforated cages, grate,
stand and gate valve. A batch of 20 kg soy dal in four perforated cages is dipped into annular space for I hour at 100
°C. After treatment, the dal is air dried.

Specifications

Overall Dimensions

- Diameter (mm) : 460

- Height (mm) : 1470
- Weight (kg) : 35
Capacity (kg/h) : 20

Fuel requirement (kg) : 3.5

Thermal efficiency (%) : 21-38

Labour requirement (man-h/q) :5

Uses

It is used to impart wet heat treatment to soy dal to eliminate anti-nutritional factors

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer : 63

104
 PULSES - Machinery
S.N Name of Machinery for Pulses Page.No

1 Manually Operated Fertilizer Broadcaster 106

2 Manual Garlic Planter Multicrop Planter 107

3 Power Tiller Mounted Zero till Drill machine 108

4 Power Operated Till Plant machine 109

5 Power tiller Operated Air assisted Seed Drill 110

6 Power Tiller Drawn Seeder 111

7 Power Rotary weeder 112

8 Animal drawn Planter 113

9 Naveen Dibbler 114

10 Animal drawn Planter 115

11 Rotary Dibbler 116

12 Seed Grader cum Cleaner (Pedal and Power Operated) 117

105
 Manually Operated Fertilizer Broadcaster

Features:

It consists of a hopper with tapered bottom, with a side slope of about 46 degrees. A circular disc having X sections
is fitted on a vertical shaft below the fertilizer hopper and is rotated by it consists of a hopper with tapered bottom,
with a side slope of about 46 degrees. A circular disc having X sections is fitted on a vertical shaft below the
fertilizer hopper and is rotated by a handle through gear arrangement. The gear ratio between the handle and the
spreading disc is 1:8.4. A metered quantity of the fertilizer through adjustable opening falls on the disc,
which spreads uniformly due to centrifugal force. Machine is mounted on the shoulders and is operated at a
forward speed of about 2.0 km/h.
Brief Specifications:
Power source : One person
Hopper bottom shaped : Cone
Width (mm) : 280
Height (mm) : 410-415
Hopper capacity (kg) : 12-15
Shape of metering hole : circular
Spreading disc spinner diameter (mm) : 225-273
Vertical clearance from hopper bottom (mm) : 24-44
No of fins :8
Weight (kg) : 3.8-10

Uses:
It is suitable for broadcasting granular fertilizers like urea, DAP etc. in the field uniformly. The effective width
of coverage is about 630 cm.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture: 335, 63, 53, 91, 224, 116, 366.

106
 Manual Garlic Planter MulTicrop Planter

Features:
This is a hand wheel hoe, used for inter-culture operation on which planting mechanism is mounted. The planting
mechanism consists of a vertical plate with spoons, and receives drive motion from the ground wheel through chain
and sprockets. For operation of the planter, a person pulls it from rope attached to the hook and other person steers
the machine by holding it by the handle. Upon pulling the planter forward, ground wheel .starts rotating transmitting
motion to the vertical plate fitted with spoons in the hopper. The hopper is filled with seeds or garlic cloves. As the
vertical plate rotates, the spoons pick up the bulb/seed, which is discharged, in the small hopper connected to the
furrow opener through a tube. The seed is then dropped in the furrow created by the furrow opener. It is provided
with markers for maintaining the row-to-row spacing. Varying the number of spoons on vertical plate can vary plant
spacing. Plantings spoons for other crops like pea, sunflower, cotton, okra (bhindi), maize, and soybean are also
available.

Specifications:
Length (rnm) : 1070
Width (rnm) : 460
Height (rnm) : 1100
Number of rows : One
Capacity of seed box (kg) :3
Seed metering mechanism : Vertical disc with spoons
Number of spoons on the plate : 12 (for garlic)
Shape of spoon : Elongated cavity, 'c' shape
Power transmission : Through chain and sprocket
Depth of planting (rnm) : 10-20
Type of furrow openers : Shovel type
Machine weight (kg) : 14.0

Uses:
This planter is used for sowing of garlic, maize, moong , peas, groundnut etc. Garlic planter is labours saving
equipment and requires 90 man-hours to plant one hectare.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer: 63, 307

107
 Power Tiller Mounted Zero till Drill Machine

Features:

The power tiller mounted zero till drill consists of five inverted Tee type furrow openers,
seed and fertilizer hoppers and fluted roller type metering mechanism. A compaction roller
provided for closing the slit created by furrow openers after the placement of seed, fertilizers. It
is mounted on the hitch point of an 8-10 hp power tiller. It can directly drill seed and fertilizer
without seedbed preparation. It is suitable for wheat, barley, lentil, chickpea, pea and paddy.
Field capacity of the machine is 0.15 ha/h and field efficiency is 65%.

Uses:

For drilling of wheat, barley, lentil, chickpea, pea after rice harvest.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer : 63

108
 Power Tiller Operated Till Plant Machine

Features:

This machine has been specially designed for operation with a power tiller of 10-12 hp to carry out simultaneous
tilling and planting operation in a single pass. It can plant two rows simultaneously. It is provided with a pair of
depth control gauge wheels, which also serve to activate the metering mechanism. Some of its major components are
the main frame, seed and fertilizer boxes, metering mechanism, transport wheel, furrow openers, hitch system etc. It
is suitable for sowing seeds of wheat, soybean, Bengal gram, sorghum etc in medium and heavy soil.

Specifications

Overall Dimensions
- Length (mrn) : 1680
- Width (mm) : 1075
- Height (mrn) : 790
Weight (kg) : 80
Draft (N) : 1700
Working width (mm) : 660 - 900
Working depth (mm) : 60-120
Operating speed (krn/h) : 1.5 - 2
Field capacity (ha/h) : 0.20 – 0.25
Field efficiency (%) : 60 - 65
Lab our requirement (man-h/ha) : 9 - 12
Fuel consumption (l/h) : 1.1

Uses:

Used for preparing he seedbed, last the seeds and drill the fertilizer simultaneously

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer : 63

109
 Power Tiller Operated Air Assisted Seed Drill

Function:For sowing small seeds like sesame, cumbu, horse gram and sorghum
Specification:
i. Type : Power tiller mounted implement
ii. Power requirement : 8 to10 hp Power tiller

iii. Capacity : 2 to 2.5 ha/day

General Information :

Cost of the unit : Rs.20, 000/-

Salient features : Spacing between the rows can be adjusted from 30 to 60 cm.
Suitable for all makes of 10 to 12 hp power tiller.
Savings in time: 80%
Savings in sowing cost: 50%

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer : 68

110
 Power Tiller Drawn Seeder

Features

The attachment consists of seed box with cup feed metering mechanism, lifting arrangement, seed cut off
clutch, tool bar, hoe type furrow openers and seating attachment, all mounted on an easily detachable
articulated double wheeled frame. The cup feed seed mechanism is driven by chain and sprockets from
the ground wheel. The lifting of tool bar disengages the clutch transmitting power to the seed-metering
shaft. The spacing between furrow openers and the depth of sowing are easily adjustable.

Specifications:
Length, (mrn) : 1080
Width, (mrn) : 1180
Height, (mrn) : 925
Number of rows :4
Row to row spacing, (mm) : 250 -600 adjustable
Power requirement, (hp) : 10 – 12

Uses:

Used for sowing seeds like groundnut maize, sorghum and pulses united for all the maker of 10-12 hp
power tillers. Operator can ride comfortably while sowing along with the unit.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer : 63

111
 Power Rotary Weeder

Technical Specification
Function : For mechanical control of weeds in crops such as sugarcane,
tapioca, cotton and orchards.
Specification :
i. Type : Self-propelled
ii. Power requirement : 8.38 hp Diesel engine
iii. Overall dimensions : 2400 x 1750 x 1100 mm
iv. Weight : 200 Kg
v. Capacity : 1 - 1.2 ha per day
General Information : A 8.38 hp diesel engine operates the weeder. The engine power is
transmitted to ground wheels through V belt-pulley. A tail wheel
is provided at the rear to maintain the operating depth. Weeding is
done by the rotary weeding attachment. The rotary weeder
consists of three rows of discs mounted with 6 numbers of curved
blades in opposite directions alternatively in each disc. These
blades when rotating enable cutting and mulching the soil. The
width of coverage of the rotary tiller is 500 mm and the depth of
operation can be adjusted to weed and mulch the soil in the
cropped field.
Cost of the unit : Rs. 65,000
:

Salient features : Useful for weeding between rows of crops like tapioca, cotton,
sugarcane, maize, tomato and pulses whose rows spacing is more
than 45 cm

Attachments like sweep blades, ridger, trailer can be used with the

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture: 175, 173, 170, 32, 174, 168, 171, 332, 189, 346, 172, 169, 198, 342, 117, 357, 81, 141, 312, 126, 308,
253, 294, 295

112
 Animal Drawn Planter

Features:
Animal drawn 3-row inclined plate planter is a multi-crop planter for planting of bold and small seeds. The planter
consists of a frame with toolbar, modular seed boxes; furrow openers and ground wheel. It has three independent
seed boxes with inclined plate type seed metering mechanism .Seed plates for sowing different seeds can be selected
and easily changed. The plate thickness, number and size of cells on seed plate vary according to seed size and
desired plant-to-plant spacing. Shoe type furrow openers ensure deeper seed placement in moist zone for sowing
under dry land conditions. Modular seed box-furrow opener units are adjustable for sowing seeds at different row-
to-row spacing. Drive to seed metering mechanism is transmitted from ground wheel through chain and sprockets.
Ground wheel and power transmission system are fixed on the main frame. An optional fertilizer box with fluted
roller type metering system can also be mounted on the main frame for application of granular fertilizers. The
planter is also suitable for sowing of intercrops as different seeds can be filled in different boxes. Power from
ground wheel is transmitted to the counter drive shaft through a set of chain and sprockets. Another set of sprockets
on the counter shaft transmits the power to main driveshaft. Main drive shaft drives the individual drive shafts of
modular seed boxes through sets of chain and sprockets and these shafts in turn rotate the inclined seed metering
plates through a set of bevel gears. Drive ratio between ground drive wheel and seed plate can be changed, by
selecting appropriate size of sprocket on wheel axle or on counter and main drive shafts.

Specifications:

Overall dimensions (mm) : 1200 x1300 x900

Weight : 75
Number of rows :3 (row spacing adjustable from 25 to 45 cm)
Seed Metering : Inclined plate with cells, 120 mm diameter
Fertilizer metering : Aluminum fluted rollers
Furrow openers : Shoe type
Power transmission : Through chain and sprocket and bevel gears
Power source : Medium size pair of bullocks

Performance results:
Visible seed damage (%) Less than 1.0
Field capacity (ha/h) 0.16 to 0.2 (for row spacing of25 -45cm)
Field efficiency (%) 60 to 70
Uses:
The animal drawn 3- row planter is suitable for sowing of bold (like groundnut, maize, Kabuli gram, etc.) and very
small (mustard, sorghum, etc) size seeds which otherwise cannot be satisfactorily sown by conventional seed drills.
The planter is also suitable for sowing of intercrops.
List of Manufacturers: Please refer to Page-222-248 as per following
Manufacturer : 63

113
 Naveen Dibbler

Features:

The automatic dibbler is manually operated hand tool which consists of a seed hopper, cell type roller for
metering of seeds, spring actuated jaws for penetration in the soil, pipe and handle. All the parts are made from
mild steel except seed roller, which is fabricated from good quality wood. For its operation, the dibbler is held in
both hands and jaws are pushed into the soil to the desired depth at an angle of 20 degrees with vertical. The
dibbler is given a jerk at the handle in the forward direction, which rotates the roller in seed hopper and
releases one or two seeds depending upon the size of cell. At this moment the jaws also open and allow the seed
to fall in the cavity created by the jaws. The dibbler is raised and moved to the next position of sowing. Upon
rising of the dibbler the roller returns to original position and jaws also close.

Specifications:
Weight (kg) : 2.5
Capacity (hills/ h) : 300-400
Uses:
For sowing of bold seeds such as peas and also for gap filling in rows

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer : 63

114
 Animal Drawn Planter

Features:
It is an animal drawn implement suitable for sowing groundnut, cotton, maize, sorghum and Bengal gram. It is
provided with a seed hopper and cup type seed metering mechanism and hence able to maintain plant to plant
spacing. The drive to the metering mechanism is through the ground wheel and chain and sprocket mechanism. A
convenient handle is provided for guiding the unit while in operation. It can accommodate three shoe type furrow
openers and the row to row spacing can also be adjusted as per the need of the crop. It saves 97.5 per cent labour and
operating time and 73 per cent on cost of operation compared to conventional method of sowing behind the country
plough.

Specifications:
Dimensions (lxwxh) (mm) : 1200 x 1100 x 950
Weight (kg) : 60
No. of rows : Three
Seed metering : Cup feed type
Furrow opener : Shoe type
Power transmission : Ground wheel through chain & sprocket
Power source : Pair of medium size bullocks

Performance results:
Machine Conventional
Seed rate (kg/ha) 139 116
Width of coverage (mm) 900 150
Depth of placement (mm) 30-40 40
Operating speed (km/h) 2.1 2.5
Field capacity (ha/h) 0.19 0.05
Field efficiency (per cent) 74 80
Draft (N) 600 400
Labour requirement (man-h/ha) 5.3 20

Uses:
It is suitable for sowing groundnut, cotton, maize, sorghum and Bengal gram.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer : 63

115
 Rotary Dibbler

Features:

The rotary dibbler is a manually operated push type device for dibbling of medium and bold size seeds. It consists of
a rotating dibbling head with penetrating jaws, covering-cum-transport wheel, seed hopper with cell type wooden
roller and a handle. Except seed roller, which is made of good quality wood, all the other parts are fabricated from
mild steel. The number of jaws varies from five to eight among various designs, depending upon seed to seed
distance. For its operation, the hopper is filled with seeds and transport-cum covering wheel is drawn to rear side.
The dibbler is then pushed forward in the direction of travel with covering cum transport wheel behind the dibbling
head. The jaws penetrate into the soil and automatically drop the seeds. The seed to seed distance depends upon size
of the polygon plate to which jaws are attached. 21.5 Jaw type 225 0.6 to 1.027

Specifications:

Seed metering : Cell type wooden roller, six cells

Weight (kg) : 21.5
Seed placement device : Jaw type
Jaw spacing (mm) : 225
Capacity (ha/day) : 0.6 to 1.027
Labour requirement (man-h/ha) : 27

Uses: For sowing of medium and bold vegetable and other cereal seeds.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer: 63

116
 SEED GRADER CUM CLEANER (PEDAL AND POWER OPERATED)

Features:

It is pedal or 0.5 HP Single Phase Electric Motor operated equipment to separate dust, dirt tones, straw,
chaff etc. and grade the cereals and pulses. It consists of main frame, hopper, feeding mechanism, sieve
box, scalping and grading sieves, eccentric unit centrifugal blower, bicycle drive unit etc.

Technical Specification:

Length (mm): 1600 mm

Width (mm): 500
Height (mm): 1000
Weight (kg): 100-110kg
Bottom Screen size (mm): 18 X 20 – 32 X20
Screen Effectiveness (%): 71.3- 81.7
Cleaning Efficiency (%): 99.1 X 99.9
Capacity Kg/H: 330-800 Kg/h
Labour Requirement: 0.4 Man-h/q
Operating Cost Rs. /q: 7.5/ Rs. /q

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture : 57

117
 Sugarcane Machinery
S.N Name of Machinery for Sugarcane Page.No

1 Animal Drawn Automatic Sugarcane Planter 119

2 Rotary weeder 120

3 Sugarcane Set Cutter 121

4 Sugarcane Detrasher 122

5 Sugarcane Crusher 123

6 Sugarcane Crusher ( Horizontal type) 124

7 Sugar-grading Machine 125

8 Rotary plough 126

9 Hand Operated Sugar cane Crusher 127

10 Sugarcane Crusher 128

11 Tractor operated Multipurpose Equipment 129

12 Tractor drawn Sugarcane Cutter Planter 130

14 Inter Row Rotary Cultivator Tiller 131

15 Stone Burier 132

118
 Animal Drawn Automatic Sugarcane Planter

Features:

This animal drawn implement is suitable for planting straight cane sett and simultaneous application of granular
fertilizer. It has separate provision for placing the cut sets and fertilizer. Metering mechanism gets its drive from the
ground wheel and set of chain and sprockets. Furrow opening, placement of sets and covering of the sets is
accomplished in a single pass. It saves 60 per cent labour, 65 per cent time of operation and 55 per centon cost of
operation compared to conventional method of opening of furrow by tractor drawn ridger or two passes of bullock
drawn country plough, manual sett cutting, dropping of sets, manual application of fertilizer and insecticides and sett
covering by country plough and planking. It also results in 10 per cent increase in yield.

Specifications:
Dimensions (lxwxh) (mm) : 1600xl150x900
Weight (kg) : 75
No. of rows : One
Seed metering : Belt conveyor type
Fertilizer metering : Fluted roller type
Power transmission : Lugged ground wheel, chain and sprocket
Furrow opener : Shoe type
Hopper capacity (m3) : 0.086 (225-250 sets of 350 mm length)
Power source : One pair of bullocks
Performance results:
Seed rate (kg/ha) : 5000

Width of coverage (mm) : 900

Depth of placement (mm) : 120

Operating speed (km/h) : 2.2-2.8

Field capacity (ha/h) : 0.1

Field efficiency (per cent) : 30
Missing’s (per cent) : 10
Draft (N) : 750 - 900
Labour requirement (man-h/ha) : 110

Uses:
It is suitable for planting straight cane sett and simultaneous application of granular fertilizer.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer: 14, 258, 276, 231, 80, 90, 143

119
 Rotary Weeder

Technical Specification
Function : For mechanical control of weeds in crops such as sugarcane,
tapioca, cotton and orchards.
Specification :
i. Type : Self-propelled
ii. Power requirement : 8.38 hp Diesel engine
iii. Overall dimensions : 2400 x 1750 x 1100 mm
iv. Weight : 200 Kg
v. Capacity : 1 - 1.2 ha per day
General Information : A 8.38 hp diesel engine operates the weeder. The engine power
is transmitted to ground wheels through V belt-pulley. A tail
wheel is provided at the rear to maintain the operating depth.
Weeding is done by the rotary weeding attachment. The rotary
weeder consists of three rows of discs mounted with 6 numbers
of curved blades in opposite directions alternatively in each
disc. These blades when rotating enable cutting and mulching
the soil. The width of coverage of the rotary tiller is 500 mm
and the depth of operation can be adjusted to weed and mulch
the soil in the cropped field.
Cost of the unit : Rs. 65,000
Salient features : • Useful for weeding between rows of crops like
tapioca, cotton, sugarcane, maize, tomato and pulses
whose rows spacing is more than 45 cm
• Attachments like sweep blades, ridger, trailer can be
used with the machine.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer : 40

120
 Sugarcane Set Cutter

Function: For cutting sugarcane sett with single bud

Specification:

i. Type : Motor operated

ii. Power requirement : 8 to10 hp Power tiller

iii. Capacity : One sett / second

Cost of the unit : Rs.2750/-
Salient features : Reduce the cost of seed cane
Additional income from the budless internodes
Saving in cost: 45%
Saving in time: 70%
Cost of operation: Rs.240 / ha

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer : 68, 143.

121
 Sugarcane Detrasher

Function: For de-trashing the sugarcane leaves.

Specification:
i. Type : Manual operated
Cost of the unit : Rs.100/-
Cost of operation : Rs.900 / ha
Salient features : Labour requirement is less
Easy for handling
Reduced cost of de-trashing
Used for all varieties of cane
Also removes the sprouted buds
Easy collection of de-trashed leaves

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer : 68

122
 Sugarcane Crusher
(Vertical type)

Features
The vertical type sugarcane crusher consists of crushing roller, king and extracting roller. The crusher can be
operated either by a pair of bullocks or electric motor stationary engine with gear drive. The rollers are made of
special grade cast iron. The crushing roller has horizontal V-grooves on its periphery that help in crushing the
sugarcane. The other rollers have straight grooved for extracting and removing juice.
Type : Vertical rollers
Number of rollers :3
Roller dimensions (mm)
(Diameter x length) : Roller (1) 216 x 216, 230 x 216
Roller (2) 216x216, 230x216
Roller (3) 178 x 191, 165 x 180

Power requirement (hp) : 5-6 or a pair of bullock

Crushing capacity (kg/h) : 200 - 250 (bullock operated)

600 - 650 (power operated)
Weight (kg) : 410-650
Uses
It is used for sugarcane crushing to extract juice.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer : 66, 248, 292, 345, 63

123
 Sugarcane Crusher
(Horizontal type)

Features :
The horizontal type sugarcane crusher consists of crushing rollers, roller axles, and set of gears, side
blades, trash blades and gear guard. There are three rollers, one for feeding and other two for crushing.
The rollers are made of high-grade cast iron and V-grooved in order to hold the sugarcane. The rollers
are held between cast iron side plates and mounted on heavy cast iron frame. The rollers receive power
from motor or engine through a set of gears. The machine is operated by electric motor or stationary
engine.
Specifications
Type : Horizontal rollers
Number of rollers :3
Roller dimensions (rnrn)
(Diameter x length) : Roller (1) 222x 216, 236 x 254, 264 x 356
Roller (2) 152 x 216, 233 x 254, 251 x 356
Roller (3) 150 x 216, 233 x 254, 248 x 356 8
Power requirement (hp) : 5-6 or a pair of bullock

Crushing capacity (kg/hr) : 1850 - 2270 (sugarcane)

Weight (kg) : 750

Uses
It is used for sugarcane crushing to extract juice.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer : 66

124
 Sugar-Granding-Machine

Power source : 5 hp AC Motor

Hammer Rotor Size : 14 inch

SS hopper with cyclon

Capacity : 150 kg/hr

Weight : 500 kg
Working : Used for forage cutting

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture : 218

125
 Rotary Plough

Technical Specification:

Working Width : 125 cm

Horse Power : 55 Hp
Weight : 500kg
\No. of Tines : 10

Main Features:
• Swinging Brackets
• Universal Joint Power Transmission Shaft with shear bolt torque limiter
• Multi speed gearbox for 540 & 1000 RPM PTO
• Movable side plates
• Tines with 12mm thickness and 285 mm length
• Rear Leveling bar with pin or screw adjustment

Optional Items
• Rear packer roller
• Rear spikes roller
• Rear spiral roller ( Starting from SRP-200)
• Universal Joint Power Transmission Shaft with clutch
• Single speed gear box for 540 rpm PTO

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture: 343

126
 Hand Operated Sugar Cane Crusher

Main Features:

• This whole machine is made out of Cast Iron Material but the Crushing Rollers are made
out of Food Grade Stainless Steel material.
• Suitable for Crushing of Sugar Cane Effectively & Efficiently.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture : 83

127
 Sugarcane Crusher

Main Features:

• Sugarcane Crusher, which is used in fruit juice shops and restaurants to extract fresh
sugarcane juice.
• These machines have the capacity of 1.5hp and hence deliver excellent performance.
• Through a reduction gearbox, the drive is transferred to a set of hardened steel gear
wheels to the stainless steel crushing rollers.
• These machines are easy to use and help in extracting juices with utmost safety.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture : 205

128
 Tractor Operated Multipurpose Equipment

Description

This is tractor-mounted equipment, which is mounted with three point linkage system. This can
be lifted or lowered by the hydraulic system of the tractor.

This equipment can perform following operations.

• Land Preparation
• Cane Planting
• Intercultural
• Earthing-up
• Puddling

General Specifications

Length, cm 220
Width, cm 146
Height, cm 205
Weight, kg. 347

Technical Specifications

Power requirement: 5 hp and above

No. of row opener: 3

Row to row distance (cm): 75
List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture: 115

129
 Tractor drawn Sugarcane Cutter Planters

Technical Data

Slit type with ground Disc type* with ground Ridger

Particular
wheel wheels type
Power Requirement Tractor, hp 25/35 25/35 35
Labour 4 4 4
Type of furrow opener Tines with furrow guider Disc with furrow guider Ridger
No. of furrow openers 2 2 2<
Width of the furrow, cm 7-10 40-45 40-45
Row to row distance, cm 60-90 75 or 90 75 or 90
Source of power to drive sub units Ground wheel Ground wheel Tractor pto
Field capacity, ha/h 0.25 0.25 0.25
Field efficiency % 65 65 65
Saving over conventional planting
40 40 40
%

Specifications
Length, cm 175 185 204
Width, cm 150 150 162
Height, cm 220 220 211
Weight, kg 302 342 345

Use : It can also be used as Zero-till Sugarcane cutter planter

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture: 115

130
 Inter Row Rotary Cultivator Tiller

Specification:

Machine overall width (mm) : 1754

Working width (mm) : 100
Machine weight (Kgs) : 370
Overall Machine Height (mm) : 1180
Max. PTO shaft rotations (per min) :540
Required Tractor power (HP) : 25
No. Rows : 3to5
Quantity of oil (lit) : 1.5
Type of oil : SAE140
Oil change period (Hr) :300
Sprocket Wheel (Chain Wheel)
Quantity of oil (lit) : 1.5
Type of oil : SAE140
Oil change period (Hr) : 300

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture: 180

131
 STONE BURIER

Features:

1. Tractor operated Stone Burier is useful for both wet and field condition
2. This is an ideal machine for soil preparation for perfect seed bed, both for flat field
crops (grass, turf) and for crops planting in beds. (Vegetables, etc.)
3. This is a genuine one-pass machine burying the small stones/ pebbles, residues of the
previous crop.
4. The rubber top helps to avoid soil sticking and gives trouble free longer life.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture: 80

132
Cotton-Machinery
S.N Name of Machinery for Cotton Page.No

1 Animal drawn Kapas Ridger 134

2 Animal drawn Planter 135

3 Rotary weeder 136

4 Front mounted Self Propelled Boom Sprayer 137

5 Mobile Shredder ( Chopper) 138

6 Inter Row Rotary Cultivator Tiller 139

133
 Animal Drawn Kapas Ridger

Features: The ridger is more popular in the cultivation of cotton, therefore has been named as kapasridger. The
ridgerconsists of a sturdy frame, share, two mouldboardswith tail, head wheel, double handle and hitch
assembly. The share of the ridger is made from medium carbon steel or alloy steel and hardened to resist wear
in the soil. The mouldboards are adjustable and the wingspan can be adjusted according to row width. Tailpieces
are provided for increasing the furrow width. The head wheel regulates the depth of the furrow. For operation, the
implement is drawn by a pair of bullocks; the depth of furrow isadjusted by the head wheel, width of the furrow is
adjusted by the wingspan of mouldboard and tail pieces. The ridger has two handles, which helps in keeping the
implement stable during operation: The furrow is formed in a single pass and the ridge in the return pass.

Specifications

Height (rom) : 720

Weight (kg) : 400

Width (mm) : 44

Uses

It is used for making ridges and furrows for cultivation in maize, sorghum, cotton, millets, cowpea, groundnut
and other arable crops.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer: 228, 220, 48, 259, 282, 301, 299, 34, 53, 111, 188, 230, 265, 357, 9, 210, 234, 327, 213, 242, 328,
333, 23, 88, 153, 191, 209, 16, 45, 77, 318, 319, 90, 143, 8, 101, 120, 139

134
 Animal Drawn Planter

Features

It is an animal drawn implement suitable for sowing groundnut, cotton, maize, sorghum and Bengal gram. It is
provided with a seed hopper and cup type seed metering mechanism and hence able to maintain plant to plant
spacing. The drive to the metering mechanism is through the ground wheel and chain and sprocket mechanism. A
convenient handle is provided for guiding the unit while in operation. It can accommodate three shoe type furrow
openers and the row to row spacing can also be adjusted as per the need of the crop. It saves 97.5 per cent labour and
operating time and 73 per cent on cost of operation compared to conventional method of sowing behind the country
plough.

Specifications
Dimensions (lxwxh) (mm) : 1200 x 1100 x 950
Weight (kg) : 60
No. of rows : Three
Seed metering : Cup feed type
Furrow opener : Shoe type
Power transmission : Ground wheel through chain & sprocket
Power source : Pair of medium size bullocks

Performance results
Machine Conventional
Seed rate (kg/ha) 139 116
Width of coverage (mm) 900 150
Depth of placement (mm) 30-40 40
Operating speed (km/h) 2.1 2.5
Field capacity (ha/h) 0.19 0.05
Field efficiency (per cent) 74 80
Draft (N) 600 400
Labour requirement (man-h/ha) 5.3 20

Uses
It is suitable for sowing groundnut, cotton, maize, sorghum and Bengal gram.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer: 69, 94, 144, 147, 247, 76, 104, 215, 249, 260, 363, 97, 5, 12, 107, 145, 279, 300, 370, 370, 65, 211,
165, 310, 307, 356

135
 Rotary Weeder

Technical Specification
Function : For mechanical control of weeds in crops such as sugarcane,
tapioca, cotton and orchards.
Specification :
i. Type : Self-propelled
ii. Power requirement : 6-8hp Diesel engine
iii. Overall Dimensions : 2400 x 1750 x 1100 mm
iv. Weight : 200 Kg
v. Capacity : 1 - 1.2 ha per day
VI. Tilling Width :40 to 80 cm
VII.Tilling depth :8 to 10 cm
General Information : A 8.38 hp diesel engine operates the weeder. The engine power
is transmitted to ground wheels through V belt-pulley. A tail
wheel is provided at the rear to maintain the operating depth.
Weeding is done by the rotary weeding attachment. The rotary
weeder consists of three rows of discs mounted with 6 numbers
of curved blades in opposite directions alternatively in each
disc. These blades when rotating enable cutting and mulching
the soil. The width of coverage of the rotary tiller is 500 mm
and the depth of operation can be adjusted to weed and mulch
the soil in the cropped field.
Cost of the unit : Rs. 65,000
Salient features (1)Useful for weeding between rows of crops like tapioca,
cotton, sugarcane, maize, tomato and pulses whose rows
spacing is more than 45 cm
(2)Attachments like sweep blades, ridger; trailer can be used
with the machine.

List of Manufacturers: Please refer to Page-222-248 as per following:

82, 252, 34, 62, 111, 263, 11, 35, 155, 156, 350, 326, 194.

136
 Front Mounted Self-Propelled Boom Sprayer

Features

It consists of chassis with ground drivesystem, diesel engine (5.5 hp), spray boomwith hollow cone nozzles,
powertransmission system, and gear box, luggedcage wheels, chemical spray tank andpump. The pump and boom
with 14nozzles are mounted on a stand, which canbe attached in front of the frame.

Specifications
Power source (hp) : 5.5, Diesel engine
Boom length (mm) : 6210
Number of nozzles : 14
Type of nozzle : Hollow cone
Nozzle pressure (kg/cm1 :3
Distance between nozzles (mm) : 300-600 (adjustable)
Chemical tank capacity (I) : 50
Weight (kg) : 140

Performance results
Speed of operation (km/h) :3
Field capacity (ha/h) : 0.60
Field efficiency (%) : 65
Application rate (l/ha) : 500
Width of coverage (mm) : 6500

Uses:
For uniform spraying in horticultural crops and other crops like cotton.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer: 86, 257, 356,143, 321, 256, 10, 57, 215, 260, 185, 186, 19, 82, 110, 119, 128, 148, 252, 317, 335,
352, 359, 44, 17, 34, 49, 53, 91, 99, 111, 146, 208, 222, 223, 224, 225, 251, 300, 336, 370, 11, 26, 95, 116, 217, 323,
39, 50, 156, 329, 356, 6, 7, 87

137
 Mobile Shredder (Chopper)

Technical Specification:

Number of rows :1
Length (m) : 2.70
Height with exhaust (m) : 2.80
Height with exhaust folded down words (m): 1.35
Width (m) : 2.00
Weight (kg) : 660
Tyres : Metal wheel 16x6
3 point hitch : Category II
PTO (rpm) : 540/1000 Rpm
Required power HP : 35/50 HP
Exhaust direction : 360 adjusted by manually
Chopping knifes : 12
Cutting knifes :2
Cutting width : 5mm
Capacity : 10 tons/hour

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture: 343

138
 Inter Row Rotary Cultivator Tiller

Specification:

Machine overall width (mm) : 1754

Working width (mm) : 100
Machine weight (Kg) : 370
Overall Machine Height (mm) : 1180
Max. PTO shaft rotations (per min) : 540
Required Tractor power (HP) : 25
No. Rows : 3to5
Quantity of oil (lit) : 1.5
Type of oil : SAE140
Oil change period (Hr.) : 300
Sprocket Wheel (Chain Wheel)
Quantity of oil (lit) : 1.5
Type of oil : SAE140
Oil change period (Hr.) : 300

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture : 80

139
Groundnut-Machinery
S.N Name of Machinery for Groundnut Page.No

1 Tiller operated groundnut harvester 141

2 Animal Drawn Ground Nut digger 142,143

3 Self Propelled Power weeder 144

4 Power weeder 145

5 Front mounted Self Propelled Boom Sprayer 146

6 Impact type Ground nut Stripper 147

7 Ground Nut decorticator 148

8 Ground Nut Thresher 149

9 Bund forming machine 150

10 Power harrow 151

11 Centrifugal Pump 152

12 Horticulture Sprayer 152

13 Groundnut Digger shaker Windrower 153

14 Inter Row rotary Cultivator tiller 154

15 Roto Seeder 155

140
 Tiller Operated Groundnut Harvester

Function: For harvesting groundnut

Specification:

i. Type : Power tiller operated

ii. Power requirement : 10 to 12 hp

iii. Capacity : 0. ha / day

Cost of the unit : Rs.12, 000/-

Cost of operation : Rs.700 / ha

Salient features : Suitable for harvesting all varieties of groundnut

Suitable for all makes of 10 to 12 hp power tiller
Saves time and labour
Savings in time: 90%
Savings in cost: 30%

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer : 80

141
 Animal Drawn Ground Nut Digger

Features

It is an animal drawn implement suitable for harvesting groundnut and also potato. The digger is provided
with a crescent shaped blade attached to a common square shank and fitted to a frame. It is provided with
two steel wheels and a hand lever for depth control. It saves 89 per cent labour and operating time and 71
per cent on cost of operation compared to conventional method of hand pulling after irrigation.

Specifications

Dimensions (lxwxh) (mm) : 3300 x 1100 x 750

Weight (kg) : 120
No. of digging blades : One
Length of cutting blade (mm) : 575
Power source : One pair of bullocks

Performance results
Width of cut (mm) : 575
Depth of cut (mm) : 110-200
Operating speed (km/h) : 2.6-2.7
Field capacity (ha/h) : 0.10
Digging efficiency (per cent) : 98.6
Pod damage (per cent) :3
Draft (N) : 750
Labour requirement (man-h/ha) : 30

Uses:

It is suitable for harvesting groundnut and also potato.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer: 63

142
 Animal Drawn Ground Nut Digger

Features

It is an animal drawn single row implement suitable for digging out groundnut vines. A V -shaped ridger type share
is provided to dig out the vines. The ifter rods are attached behind the share. These lifter rods are spaced to allow the
clods and residual material to drop while operating the implement. The plant along with pods is then collected
manually. It saves 94 per cent labour and operating time and 60.5 per cent on cost of operation compared to
conventional method of digging with spade and hand pulling. This implement has been widely adopted by
groundnut farmers due to its efficient operation.
Specifications

Dimensions (lxwxh) (mm) : 1750 x 300 x 570

Weight (kg) : 10
Power source : A pair of bullocks
Performance results

Width of cut (mm) : 300

Operating speed (km/h) : 2.74
Field capacity (ha/h) : 0.16
Field efficiency (per cent) : 61
Total pod losses (per cent) : 5.7
Digging efficiency (per cent) : 80-90
Draft (N) : 500-600
Labour requirement (man-h/ha) : 6.70
Uses

It is suitable for digging out groundnut vines.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer : 167, 27, 96, 286, 350, 356

143
 Self-Propelled Power Weeder

Features

The self-propelled weeder consists of a boxsection chassis, 3-hp petrol -start- kerosenerunengine, transmission
system, drive wheels,tool mounting bar of 70 x 70 mm size. Theengine, gearbox and tool mounting bar are fixedto
main chassis. The engine is mounted on frontside of the chassis on proper foundation. Thegearbox with transmission
system is mounted inthe middle of chassis. Two steel lugged drivewheels of 500 mm diameter and 110 mm widthare
mounted on both ends of hexagonal shaft connected to transmission box. The wheeltread (spacing between two
wheels) can be adjusted from 400 to 650 mm to suit the row-to-row spacing of different crops. The V -shaped
weeding sweeps of 150 and 200 mm sizeare fitted on tynes. These tynes are mounted on the tool bar with clamps.
The tynesareraised or lowered for adjusting the depth of operation and locked in position by the clamp.The spacing
between sweeps is easily adjusted by sliding the tynes on tool mounting barto suit the crop row spacing. Power from
engine is transmitted to gearbox through V –beltand pulleys. Inside the transmission box power is transmitted
through chain and sprocketsto two hexagonal drive shafts/ axles. A lever operated clutch idler pulley is used
fortightening loosening of V -belt, transmitting the power from engine to transmission box.For operation, the tynes
are adjusted to the raised position so they do not dig into theground and the weeder is transported to the field. The
tynes are adjusted according to therow spacing of the crop and depth of operation.

Specifications
Overall dimensions (mm) : 2300 x 1000 x850
Engine : 3 hp petrol- start- kerosene-run
Chassis : 70 x70 mm box section chassis
Wheels : Two steel lugged drive wheels of 500 mm diameter and
Performance Results
Weeding Efficiency (%) : 65-70
Field capacity (ha/h) : 0.15
Field efficiency (%) : 60 to 70
Fuel Consumption (l/h) : 0.70
Uses:
The CIAE self-propelled Power weeder is suitable for weeding and interculturaloperations in upland row crops like
groundnut, maize, soybean, pigeon pea, etc. sown atrow-to-row spacing of more than 30 cm.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer : 63

144
 Power Weeder

Features:

Power Weeder Ideal for yearly crops & row crops.

Technical Specification:
Tilling Width : 30 cm
Tilling Depth : 10-12 cm
Engine Type : 2-stroke
Max Output : 1.5-2.4
Displacement : 35-42cc
Fuel Tank Capacity : 0.9L

Useful for weeding between small rows of crops like paddy, corn, wheat, maize, groundnuts,
sunflower, and vegetables whose rows spacing is between than 25 cm - 50 cm. This MAAXTM
Power Weeder is very compact, lightweight and can go anywhere a person can go.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer : 232

145
 Front Mounted Self-Propelled Boom Sprayer

Features

It consists of chassis with ground drive system, diesel engine (5.5 hp), spray boom with hollow cone nozzles, power
transmission system, and gear box, lugged cage wheels, chemical spray tank and pump. The pump and boom with
14 nozzles are mounted on a stand, which can be attached in front of the frame.

Specifications

Power source (hp) : 5.5, Diesel engine

Boom length (mm) : 6210
Number of nozzles : 14
Type of nozzle : Hollow cone
Nozzle pressure (kg/cm1 :3
Distance between nozzles (mm) : 300-600 (adjustable)
Chemical tank capacity (I) : 50
Weight (kg) : 140
Performance results
Speed of operation (km/h) :3
Field capacity (ha/h) : 0.60
Field efficiency (%) : 65
Application rate (l/ha) : 500
Width of coverage (mm) : 6500

Uses: For uniform spraying in horticultural crops and other crops like groundnut.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer: 86, 257, 356, 321, 256, 10, 57, 215, 260, 185, 186, 19, 82, 119, 128, 148, 252, 317, 335, 359, 44, 17,
34, 49, 53, 91, 93, 111, 146, 208, 222, 223, 224, 225, 251, 291, 370, 11, 28, 95, 116, 217, 323, 39, 50, 156, 329, 6, 7,
87

146
 Impact type Groundnut Stripper

Function: To remove groundnut pods from vines

Specification:
i. Type : Operated by 2.5 HP kerosene engine
ii. Power requirement : 10 to 12 hp
iii. Capacity : 0.4 ha / day
General Information : Operator assisted by two helpers Suit to the requirements of medium and
small farmers
the vines are not fed into the stripper hence the fodder value of the vines is
maintained
Cost of the unit : Rs.28, 000/-
Cost of operation : Rs.833 per ha.
Salient features :
Stripping efficiency : 100%
Damage to pods : less than 2%
Saving in labor : 37%
Saving in cost : 17%

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer : 350, 239, 240

147
 Ground Nut Decorticator

Features:

It consists of an oscillating sector with sieve bottom and a handle. Ten numbers of cast iron peg assemblies are fitted
in the oscillating sector unit. The groundnut pods are shelled between the oscillating sector and the fixed perforated
concave screen. The decorticated shells and kernels fall down through the perforated concave sieve, are collected at
the bottom of the unit, and separated manually by winnowing.

Specification

Length (mm) : 625

Width (mm) : 310

Height (mm) : 1320

Type : Hand operated

Power requirement : Manual, one person

Capacity (kg/h) : 200

Uses

To shell groundnut pods and separate kernels.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer: 36, 257, 14, 75, 187, 258, 276, 97, 223, 310, 286, 151, 285, 296, 350

148
 Groundnut Thresher

Sr. Parameter Observation

No
(i) Specifications
Prime-mover Type : Four stroke diesel engine
Type of Drive : Belt Drive
Frame Dimensions (mm) : 2390 x 916 x 1440 (length x width x height)
Type of Crop feeding system : Hopper
Size of feeding hopper (mm) : 811 x 317
Feeding Platform
- Size of platform (mm) : 1010 x 795 x 115
- Height of platform from G.L.(mm) : 1560
- Height of hopper (mm) : 620
- Height of feeding hopper from G.L.: 2554
Threshing Cylinder
Type : Beater
Size of cylinder (mm) : 700 x 555ø
Threshing cylinder speed :
- Rotational (rpm) : 400
- Peripheral (m/s) : 11.6
Main shaft
Material & size (mm) : MS rod, 1375 x 50.7 ø
No. type of bearings on shaft : Two, Ball bearings
Concave
Peripheral length (mm) : 979
Effective length (mm) : 849
Total width (mm) : 802
Effective width (mm) : 764
Effective area (sq. M) : 0.649
Concavity (mm) : 235
Blower
No. of blower : One
Type : Suction type
(ii) Lab. Performance Result
Hourly Fuel Consumption : 1.14 to 1.35 l/hr.
Cleaning efficiency : 90.70 %
Threshing efficiency : 99.44 %
Power Requirement : 799 to 832 rpm

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer: 86, 257, 14, 75, 187, 258, 276, 97, 223, 310, 286, 151, 285, 296, 350

149
 Bund Forming Machine

Features:

The Bund Former will strengthen the existing bund without damaging the height of the
bed by adding on the sideways. This machine is suitable for both dry and wet conditions. The
power required to operate this machine is about 40-50hp with 540rpm at PTO. The height of the
bund is 25-30 cm.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture: 80

150
 POWER HARROW

Features:

• Highly useful for horticultural farms, green house cultivation and hi-tech gardening.

• Equipped with rear cage rollers

• Working depth is adjustable

• Side guard are easily adjustable in relation with size working depth

• Equipped with 540rpm gearbox

• Blade size- 250X 10 mm

Specifications:
Working width (m) 1.0
Transport width (m) 1.12
Power Requirement (Hp) 40-80
Number of Blades 8
Weight without cage roller (Kg) 275
Weight with cage roller (Kg) 320
List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture: 80

151
 CENTRIFUGAL PUMP

Specification:
Pump Size: 2.5” x 2.5” & 3” x 2.5”
Discharge: 9 to 49 lps
Head range: 21 to 29 Mtrs
High Head: 3000 to 10000 feet

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture: 57

HORTICULTURE SPRAYER

Features:
30 to 40 feet height Covered with H. T. P. Pumps Enable Spray for Apple, Mango and Chiku etc.

Specification:
Diesel Consumption: 0.75 Ltr. / Hour
Capacity: 2 Gun will be used at a time
Tank: 200 Ltr

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture: 57

152
 GROUNDNUT DIGGER SHAKER WINDROWER

Specification:
HP Requirement: 45 hp tractors and up with Cat. II Hitch.
Digging capacity: Approximately 1.5-2 acres per hour at recommended ground speed of 4.8-5.6 km/hr
Weight: 540 kgs
Dimensions: Width- 84.1/2”, Length- 103”, Height-66”
Main Frame: Welded, tubular steel, cat. II hitch, 3-Point.
Gear box: 540Rpm standard, optional 1000rpm available. Complete with tractor and implement end
telescoping PTO shaft.
Drive: Dual V-belt with adjustable idler. Chain drive 20-bar rattler bar assembly.
Windrowing rods: Adjustable for crop conditions. Designed for clog-free operation
Plow standards: High-strength steel with blade pitch
Gauge wheels: Bolt type adjustment with tube Tyres, factory-mounted

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture: 216

153
 Inter Row Rotary Cultivator Tiller

Specification:
Machine overall width (mm) : 1754
Working width (mm) : 100
Machine weight (Kgs) : 370
Overall Machine Height (mm) : 1180
Max. PTO shaft rotations (per min) : 540
Required Tractor power (HP) : 25
No. Rows : 3to5
Quantity of oil (lit) : 1.5
Type of oil : SAE140
Oil change period (Hr) : 300
Sprocket Wheel (Chain Wheel)
Quantity of oil (lit) : 1.5
Type of oil : SAE140
Oil change period (Hr) : 300

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture: 180

154
 ROTO SEEDER

Specification:
Overall width (Inch0 : 70
Working width (inch) : 55
Weight
Hitch Type : Category 1 & 2
Hp Required : 40-45 HP
Gear Box Option : Multi Speed
Side Transmission : Chain Drive
Working Depth :2” (5 cm)/ 6” (15cm)
No. of Flanges :6
No. of Blades : 36
PTO Speed : 540/1000 rpm
Seed Capacity (kg) : 58
Fertilizer Capacity (kg) : 60
Seed Fertilizer Distribution : Broadcasting
Seed Fertilizer Metering Device: Broadcasting
Ground Wheel : One 24” Diameter spiked roller with spring to maintain with spring maintain contact
with ground

Benefits:
1. Saves working time and slashes fuel costs.
2. Can be operated either in wet or dry soil conditions for preparing seed bed.
3. Improves soil health.
4. Provides perfect tilth.
5. Improves productivity and yield.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer : 341

155
 Vegetable – Machinery

S.N Name of Machinery for Vegetables Page.No

1 Animal drawn Potato Planter 157

2 Potato slicer 158

3 Potato Planter 159

4 Screw De-Stoner 160

5 Carrot Flipper 161

6 Carrot Topper 162

7 High capacity Carrot Harvest machine 163

8 Harvest Machine 164

9 Vegetable & cabbage cutting machine 165

10 Fruit Pulper 166

11 Vegetable Cutter 167

12 Cabbage Cutting Machine 168

156
 Animal Drawn Potato Planter

Features:

It is a rotating sector type planter suitable for makingridges and planting potato in the ridges. The planter hasseed
boxed fitted on the machine in which the seed tubersare stored. One operator sits on the machine and places theseed
tubers on the rotating sector from time to time. Thetubers are placed on the ridges and get covered by the twodiscs in
a single pass of the machine, thus ensuringuniformity of planting and saving labour and time. Itsaves 50 per cent
labour, 85 per cent operating time and 60per cent on cost of operation compared to conventionalmethod of
placement of seed in rows by making ridgesmanually. The performance was evaluated at IISR and it was found
satisfactory.

Specifications:
Dimensions (lxwxh) (mm)1150x 1000x950
Weight (kg) : 75
No. of rows : One to two
Seed metering : Rotating sector
Power transmission : Ground wheel
Furrow opener : One pair of discs
Seed hopper capacity (kg) : 20°

Performanceresults
Seed rate (kg/ha) : 600
Width of coverage (mm) : 900
Depth of placement (mm) : 140
Operating speed (km/h) : 1.5
Field capacity (ha/h) : 0.1
Field efficiency (per cent) : 70
Missing’s (per cent) : 10 - 10
Labour requirement (man-h/ha) : 40

Uses:
It is suitable for making ridges and planting potato in the ridges.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer: 157, 85, 43, 98, 131, 132, 27, 42, 72, 73, 74, 96, 122, 137, 184, 226, 228, 270, 271, 305, 328, 330,
307, 90, 243

157
 Potato Slicer

Features

The potato slicer consists of a rotating disc, which carries radial knives and revolves on a vertical shaft. Over this
disc, vertical cylinders are mounted for feeding the potatoes. It is mounted on a frame made of mild steel angle
sections and rotated with a handle provided on the top. It consists of mainframe, four cylinder and pressing device. It
can accommodate potato up to 75 mm diameter.

Specifications

Overall Dimensions

Length (mm) : 625

Width (mm) : 600

Height (mm) : 910

Weight (kg) : 30

Capacity (kgih) : 30

Labour requirement (man-h/q) : 3.3

Uses

It is used for slicing of potatoes for making chips and wafers.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer: 63

158
 POTATO PLANTER:

Features:

Automatic Potato planter are ideal planting machine for small and big farms and suitable for minimum 45
HP tractors. Ability to make bed with disc and mouldplough, quick and easy adjustments together with many other
features make these planters superior in planting performance.

Technical specification:
Rows (Nos.): 2
Row Width: 20-21-22-23-24-25-26-30
Seed Distance (Inch)
Single Seed: 2, 2.5, 3, 4, 5, 6
Double Seed: 5, 6, 8, 9, 10, 11
Potato Hopper Capacity (Kg): 300
Fertilizer Hopper Capacity (Kg): 100
Seed Depth (Cm): 4-5
Planting Capacity (Acre/hr.): 1 to 1.5
Power (HP): 45
Dimension (LxWxH) (Inch): 75” X 81” x 66”
Weight (Kg): 480

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture: 85

159
 SCREW DE-STONER

Screw de-stoners covering a wide range of products such as potatoes, carrots, celeriac and red
beets.With the screw de-stoner products like potatoes and carrots with a diameter of max. 200 mm can be
processed.

FEATURES
• Simple and effective no damage to the product
• Low water consumption (approx. 100 l per 1.000 kg / 12 gallons/1,000 lbs.)
• extremely durable, hard wearing and reliable
• ease of access for cleaning

CAPACITY
The capacity of the machine depends on the size of the product, and can be max. 5 tons/hour
(11,000 lbs. /hr.).

TECHNICAL DATA

Voltage: 230/400 V, 50/60 Hz, 3 ph

Total installed power: 2,2 KW
Screw diameter: 500 mm / 20"
Weight: ± 500 kg / 1,100 lbs
Dimensions: L x W 1.400 x 1.000 mm (55"x39")
Height: to be specified at ordering

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture: 311

160
 CARROT FLIPPER

This machine assesses the orientation and length of each individual carrot. Any carrots facing the wrong
direction are rotated by 180º.

PRODUCT SPECIFICATION

The Carrot Flipper is suitable for carrots with a diameter between 20 and 60 mm (0,78"- 2,36").

CAPACITY
The capacity of the Carrot Flipper is based on the shuffle product singulator type PVW and is
approx. 4.500 pieces/hr.

TECHNICAL DATA

Voltage: 230/400 V, 50/60 hz, 3ph

Total installed power: 0.2kW
Weight: ±105 Kg (231 lbs)
Dimensions (LxWxH): 1.050x700x1.600 mm (41"x28"x63")
In feed height: 1.020 mm (40")

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture: 311

161
 CARROT TOPPER

A basic machine with hand feeding and hand positioning of carrots.Cuts of the tops from the carrots at a
capacity of 60 carrots per minute.

FEATURES

adjustable topping control hygienic design,

easy to clean and disinfect

heavy duty construction
PRODUCT SPECIFICATION

The WO-1 processes carrots with a diameter of 30 to 75 mm and a maximum length of 380 mm.

CAPACITY

The capacity of the WO-1 is approx. 60 carrots per minute.

TECHNICAL DATA
Voltage: 230/400 V, 50/60 Hz, 3 ph
Total installed power: 0.8 KW
Weight: approx. 280 kg (616 lbs)
Dimensions
2.000 x 830 x 1.570 mm (79"x33"x62")
(LxWxH):
1.000 mm (adjustable +/- 100 mm) / (39" adjustable
Belt height:
+/- 4")

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture: 311

162
 High capacity carrot harvest machine

Features
1: this machine can harvest carrot and potato
2:easy operate and high capacity

Specifications

Model 4U—1300
Working row 2
Working mode Casting
working width 130cm
Working Efficiency 5--8(mu/hr)
700kgs
Net weight

Matched tractor 4 wheeled tractor

Matching power 35--80HP
Working depth 25cm
Exposing rate ≥96%
Breakage rate ≤2%
PTO speed 560rpm
Overall dimension(mm) 2300*1800*1000
Packing size(mm) 2100*1600*700/2
Qty of 40HQ 50
Ex-work (RMB ) 8800
MOQ(sets) 2

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture: 166

163
 Harvesting machine

This machine is for the potato harvester, the main variety will be potato, garlic, sweet potato,
carrot, peanuts and all the crops. With high capacity, low broken rate. Long life span could get rid of the
mulching film automatically.

Features:
1.Cheap price
2.Good quality
3.Easy handle

Specifications:

The whole size of the machine (mm):1450×1150×900

Weight (kg): 230
Motor (hp): 20—35HP tractor
Capacity (/h): 2600 /h
Speed of rate (r/min): 360
Depth(cm): 20—30
Width of harvester (cm): 60—85
Space between ridges (cm): 90—120
Rate:99.5%

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture: 264

164
 Vegetable & Cabbage cutting machine

Main Features:
Cutting the vegetable into half evenly, continuous. The effect is good.
1. Used in the cabbage cutting into half.
2. For the Kimchi processing lines use.
3. Can cut the vegetables evenly.
Specifications:

Size: 2500*800*1300 (mm)

Voltage: 380(v)
Power: 2.2(kW)
Frequency: 50(Hz)
Production capacity: 3-4(t/h)

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture: 277

165
 Fruit Pulper

Main Features:
Applications: For pulping of many of the fruits and vegetables to make course pulp or fine pulp.
Capacity: Generally 50kg to 1000kg per hour

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture: 1

166
 Vegetable Cutter

This cutter is used for the process of cutting the vegetables in an efficient manner and
also rapidly.
Features:
• Portable and light weighted
• Affordable cost

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture: 201

167
 Cabbage cutting machine

Features:

This is professional cut sour pickled cabbage machine.

It can process 4-5 tons sour pickled cabbage, Stainless steel body,Easy to clean and Easy in
operation

Specifications:

Voltage: 220V/380V
Motor power: 0.7 5kW
Spindle speed: 460/1460/sec.
Net weight: 65 KG
Specification: 760 x 560 x 1060 cm
Conveyor belt power: 0.75 kW
Conveyor belt specifications: 1740 x 670 x 410 cm

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture: 277

168
Horticultural Tools
S.N Name of Horticulture Tools Page.No

1 Areca Sprayer 170

2 Oil palm Harvesting Tool 171

3 Mulberry Stem cutter 172

4 Manual operated Lawn Mover 173

5 Sickle 174

6 C-cutter 175

7 Hand Press Citrus Fruit Juicer 176

169
 Areca Sprayer

Function:To spray chemicals in Arecanut trees. The spray fluid is supplied from a rocker arm sprayer. Suitable

forspraying trees up to a height of 18 meters.

Specification:
i. Type : Manually operated and easily transportable.
ii. Power requirement : A team of three persons.
iii. Overall dimensions : 600 x 600 x 1500 mm
iv. Weight : 22 kg
v. Capacity : 20 trees per hour
General Information : The sprayer has a telescopic aluminum boom which can extend from 8m to 16m height
by winding a cable. The boom is mounted on a supporting frame. The entire boom can be
rotated to spray in all directions around the boom. The nozzle can be angled up or down
by a remotely actuated pneumatic actuator. The spray fluid is supplied from a rocker arm
sprayer. A team of three persons will be required for spraying operation.
Cost of the unit : Rs.15, 000/-
Salient features : It can be used for spray chemicals for arecanut trees.
Suitable for spraying trees up to a height of 18 meters.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer : 240

170
 Oil Palm Harvesting Tool

Cost of the unit : Rs.800/- including 10 feet aluminum pole. Function:For harvesting of oil palms.

Specification:
i. Type : Manual operated unit
ii. Power requirement : One male
iii. Capacity : 144 bunches / day
General Information : The sprayer has a telescopic aluminum boom which can extend from 8m to 16m height
by winding a cable. The boom is mounted on a supporting frame. The entire boom can be
rotated to spray in all directions around the boom. The nozzle can be angled up or down
by a remotely actuated pneumatic actuator. The spray fluid is supplied from a rocker arm
sprayer. A team of three persons will be required for spraying operation.
The operator can work for long time continuously without fatigue
Cost of operation : Rs.1.11 / fresh fruit bunch
Salient features : The sickle can be attached to as well as detached from long aluminium poles of various
lengths as per the height of the tree

Saves cost and time

50% more bunches harvested than conventional method
Savings in time: 51%
Savings in cost: 33%

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer : 240

171
 Mulberry Stem Cutter

Function:To cut the mulberry stem for planting

Specification:

i. Type : Hand cum pedal operated unit.

ii. Power requirement : One male

iii. Overall dimensions : 750 x 600 x 1050 mm

iv. Weight : 26 kg

v. Capacity : 2400 stems per hour

General Information : The unit consists of a wooden platform in which a cutting knife is fixed by means of a
hinge. The knife is operated by means of a long handle. Stems are placed on the platform
at an angle of 45° and they are cut by pressing the handle. The handle reaches its original
position by the action of a spring attached to the other end.

Cost of the unit : Rs.4, 000/-

Salient features : The stems are cut easily without damage.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer : 240

172
 Manual operated Lawn Mover

Features:
• Ultra-light weight
• Available in two models
• Easy 28-300mm cutting width
• Easy 38-380mm cutting width
• Too less cutting Adjustment up to 12-21-30mm
• High impact Plastic Wheels with Rubber Tyres
• Grass Collecting Box
• Six Blade Cutting Cylinder

Technical Specifications:
Model Easy 38
Type Manual Lawn Mower with Rotary Cylinder
Net Weight 12kg
Gross Weight 14.70kg
Cutting Width 38cm
Cutting Height 12-30mm (3 cutting heights adjustments at 12-21-30mm without using any tool)
Cylinder Suspension Ball Bearing
Power 500W
Wheels High impact plastic wheels with Rubber Tyres
No. of cuts per meter 40
Handle 2 parted powder coated pipe handles
Grass Collector Made of qualityvirgin plastic
Paint Powder Coating
Packing Mower with all assemblies packed in one single carton.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture: 78

173
 SICKLE

Main Features:

Quality: Cold rolled, En/9 Material, made by Temper and blackening system

Maintenance: No need to Sharpen, long term grooved make.

Durability: Strong blade & Plastic handle.

Weight: Only 130gm gives smooth work, no fatigue.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture: 57

174
 C-CUTTER

Main Features:

- Strong blade with steel plate.

-Made of Temper & Hardness Treatment.

-It can cut castor-Bunch & Every Type of Vegetable.

- It can cut Castor-Bunch & Every Type of Vegetables.

- 1 Year replacement Warranty.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture: 57

175
 Hand press Citrus Fruit Juicer

Whole machine made out of Aluminum. Suitable for Extracting Juice from Sweet Lime, Lemon

etc.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture: 83

176
 Tea/Coffee- Machinery

S.N Name of Machinery for Tea /Coffee Page.No

1 Hand operated Coffee Pulper 178

2 Hand operated Coffee Huller 179

3 Hand operated Aluminum Fruit Juicer 180

4 Coffee Grader 181

5 Coffee Huller 182

6 Brush cutter 183

7 Hand rotary duster 184

8 Foot sprayer 185

9 Power Sprayer 186

10 Motorized Knapsack Mist blower 187

11 Thermal Fogger 188

177
 Hand Operated Coffee Pulper

Features

This small Pulper have been designed to cater to the needs of very small farmers, who
have a need for small hand operated equipment in an environment where to basic infrastructural
facilities are available.

Capacity: 100 kgs /Hr

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture: 83

178
 Hand Operated Coffee Huller

Features:

Sample hulling of Dry CherryIs done using this Huller to determine the coffee bean yield.

Capacity: 15 - 25 kgs./Hr

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture: 83

179
 Hand Operated Aluminum Fruit Juicer

Main Features

Suitable for roasting of Coffee, Nut, Spices, red Chilly etc.,

Brum Capacity : 5Kgs & 15 kgs
Fuel : Fire wood/Charcoal

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture: 83

180
 Coffee Grader

Graders are used to grade food grains by virtue of their size. Used in a variety of grading
applications including coffee, the grader is available in single and deck versions depending on the number
of graders required and capacity.

Advantages

Large screens with perforation lowest tolerance of any wanted size, round and oblong hole perforations
according to the customer standard. Automatic cleaning of the screen by means of massive rubber balls
underneath every screen.

Coffee Grades Screen Size

• AAA :- 7.50 Round Holes

• AA :- 7.14 Round Holes
• A :- 6.65 Round Holes
• B :- 6.00 Round Holes
• C :- 5.00 Round Holes
• Bits:- 3.50 Round Holes
• P Bre1 :- 4.75 Round Holes
• P Bre2 :- 4.30 Round Holes

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture: 203

181
 Coffee Hullers

Special features

• Top rate hulling capacity on account of a six – armed cross beater rotating in perforated
hulling drum
• Perfect separation of hulled coffee by using husk separation blowers
• High speed oscillating table

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture: 203

182
 Brush Cutter

Features:
The Brush Cutters provides accurate cutting speeds with less fatigue. Also, the vibration is considerably dampened
for long hours of comfortable use and the load balancing system reduces stress on sensitive areas. These brush
cutters are durable and their ease of maintenance brings peace of mind even in the toughest of jobs.

Technical Specification:
Engine : Air-cooling, 2-Stroke, Single Cylinder
Displacement : 32.6cc
Engine Power : 0.9kw/6500-7000r/min
Carburetor : Diaphragm Type
Fuel Tank Capacity : 1350 ml
Fuel/oil Mixture Ratio : 25:1
Machine Weight : 3.5 kg
Engine Weight : 8.7 kg
Uses:
1. Cutting Grass, Maize, Paddy, Sugarcane
2. Tea pruner
3. Pole pruner
4. Pole trimmer
5. Nilon cutter
6. Olive shaker

Additionally, customers are eased with the availability of the Walk behind Brush Cutter with latest configurations
ensuring easy operation and low maintenance cost.These brush cutters are durable and their ease of maintenance
brings peace of mind even in the toughest of jobs.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturere: 99, 232, 80, 351, 256, 252

183
 HAND ROTARY DUSTER

Features

The hand rotary duster is available in two models, shoulder mounted and belly mounted. It is a common type of
duster being used by the farmers. The duster consists of a hopper, fan/blower, rigid/flexible discharge pipe,
reduction gearbox, rotating handle, shoulder straps, and metering mechanism. The hopper is either made of plastic
or aluminium. The hopper made from mild steel sheet is coated with anti-corrosive material for longer life. The
duster has mechanical agitator connected to the gearbox placed in the hopper, which chums the chemical and
prevent clogging of the outlet. The adjustable orifice plate mounted below the hopper outlet controls the application
rate. The fan/blower is enclosed in the casing and is rotated with the handle through gearbox. For operation, the
hopper is filled 1/2 to 3/4th of the capacity of the hopper. This is mounted on the shoulder/belly with the help of
adjustable straps. The discharge pipe fitted with spoon type deflector is directed towards the target continuously
rotating the handle. The chemical in dust/powder form drops from the hopper in the discharge pipe having an air
stream created by the blower. These dust particles emerging in, the form of cloud from the discharge pipe is carried
to the plant where these settle on the leaves, stems and other parts.

Specifications

Overall length (mm) : 280

Overall width (mm) : 330
Overall height (mm) : 330
Weight (kg) : 3.5
Hopper capacity (1) :5
Field capacity (ha/ day) : 0.6 (for field crops)

Uses
For control of pests and diseases by use of chemicals in the dust forms in nursery, vegetable gardens, field crops, tea
and coffee plantations, green houses, glasshouses and godowns.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer: 335, 63, 53, 91, 224, 116, 366

184
 Foot Sprayer

Features
The foot sprayer is one of theideal and versatile sprayersused for multipurposespraying jobs. The principleof
working is similar to therocker sprayer. The sprayerconsists of a pump operatedby the foot lever, suctionhose with
strainer, deliveryhose, spray lance fitted withshut off pistol valve,gooseneck bend andadjustable nozzles. The
pumpbarrel is mounted on a steelframe, which provides it stability when placed on the ground. It has a provision of
two strongsprings, which retract the foot lever to its original position after each pumping stroke.Thesprayer does not
have inbuilt tank, therefore an additional storage device or container isrequired to store the spray liquid in which the
strainer suction hose remains submerged. Ithas provision for the two discharge lines, which increasesits versatility
and field capacity.The plunger pump being a positive displacement ump, builds up a high pressuretothrowspray
liquid to larger distances with a suitable boom. The pump barrel, lance and the spraynozzle are made from brass
alloy. For operation the inlet pipe is placed in the storagecontainerand one person continuously pratesthe pump by
foot lever. There is a provisionfor the operator to hold the sprayer at the top by V-type fixture. The other person
directs thelance to the target. For spraying tall trees up to a height of tom, a high jet or bamboo lancecan be used.

Specifications:
Overall length (mm) : 440
Overall width (mm) : 170
Overall height (mm) : 980
Weight (kg) : 10.0
Pressure developed (kg/cm2) : 14 -18
Field capacity (ha/day) : 1 (with one lance) and 1.5-2.0 (with two lances)
Uses
The foot sprayer is all purpose sprayers, suitable for both small and large scale spraying onfield crops, in tea and
coffee plantations, orchards, vegetable gardens, rubber estates, flower, crops, nurseriesetc.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer : 63

185
 Power Sprayers

Features

Power sprayers are used for developing high pressure and high discharge for covering largearea. These sprayers are
either operated by auxiliary engines or electric motors. Most of thesesprayers are hydraulic sprayers and consist of
power unit to drive the pump, pump unit whichemploys piston or plunger pump, piston (I to 3), pressure gauges,
pressure regulators, airchamber, suction pipe with strainer, delivery pipes fitted with lance, gooseneck bend
andnozzles. The portable sprayers use petrol felines so that these can be easily taken to the spraysites. The complete
assembly is mounted on the stretcher type frame or on wheel barrow foreasy transportation. The number of lances
may vary from I to 6 depending upon the model. Insome models there is a built in storage tank of fibreglass having
capacity of 100 litres, whilen others a separate storage tank is required in which the suction pipe of the sprayer
remains submerged. For operation, the shut off trigger valve of the lance is closed and the engine/electric motor is
started to actuate the pump. The pump draws the spray liquid from the tank,imparts pressure energy and sends it to
the delivery line/lines. The operator directs the lancetowards the target and operates the trigger/shut off valve.
Adjusting the nozzle or selecting theappropriate nozzle, adjusts the spray pattern. For delivering the spray liquid to
large distances/height a bamboo lance can also be used.

Specifications
Overall length (mm) : 740
Overall width (mm) : 610
Overall height (mm) : 990
Number of spray lance : up to 6
Discharge (l/min) : up to 25
Field capacity (ha/h) : 0.2 – 0.3
Weight (kg) : 66.0
Pressure developed (kg/cm2) : up to 40
Power required (hp) :3

Uses
These sprayers are suitable for spraying in orchards, tea and coffee plantations, rubber plantations, vineyards and
field crops. Tall trees up to a height of 15 meters can be sprayedwith these types of sprayers.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer: 225, 215, 260, 185, 82, 91

186
 Motorised KnapsackMistblower

Features

The motorized knapsack mist blower has a small 2-stroke petrol/ kerosene engine of 35 cc towhich a centrifugal fan
is connected. The centrifugal fan is usually mounted vertically. Thefan produces a high velocity air stream, which is
diverted through a 90-degree elbow to aflexible (plastic) discharge hose, which has a divergent outlet. The spray
tank that has also acompartment for fuel and engine-fan unit is mounted on a common frame, which fits to theback
of operator. The tank is made of plastic. The spray liquid flows due to gravity andsuction created at the tip of nozzle,
thus remains in the air stream. Some models of the sprayers have roller pump for pumping thespray liquid into the
discharge hose andhave tall tree spraying attachment. Thesesprayers have shear type nozzles. Foroperation, the tank
is filled with the sprayliquid and cranking with the rope starts theengine. Upon rotation of the engine the
fan'produces a high velocity air stream. Thecontrol valve for the spray liquid is openedgradually and adjusted for the
desired flowrate. The operator directs the discharge hoseto the target. The spray liquid that falls In the air stream
gets sheared and upon coming incontact with the atmosphere a mist is produced.

Specifications
Overall length (mm) : 460
Overall width (mm) : 220
Overall height (mm) : 670
Weight (kg) : 11.0
Air velocity at the outlet (m/s) : 65 – 75
Horizontal range (m) : 10 – 15
Vertical range (m) :6–8
Power (hp) : 1.2
Fan output (m3/min) :7
Field capacity (ha/h) :3

Uses
It is used for spraying in orchards, tea and coffee estates and tall crops.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacturer : 232

187
 THERMAL FOGGER

Specifications:

Type of Switch: Selenite switch and Chrome finish

Performance of combustion chamber: 18.6 KW/25.2 HP

Fuel Consumption: 1.5 L/H

Fuel Tank capacity: 1.5 Lit.

Dimensions (L X W X H mm): 1370 X 270 X 315

Solution Tank Capacity: 5 lit.

Pressure in Solution tank: 0.25 bar

Pressure in fuel tank: 0.06 bar

Batteries: 4 X 1.5V

Solution Output: 8-42 L/H

Weight (Empty): 8.2 kg

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture: 127

188
 Spices Machinery
S.N Name of Machinery for Spices Page.No

1 Hand operated Aluminum Fruit Juicer 190

2 Roller flaker 191

3 Spice Grinding Mill 192

4 Spice plant 193

5 Spice Grinding Machine 194

189
 Hand Operated Aluminum Fruit Juicer

Main Features

Suitable for roasting of Coffee, Nut, Spices, red Chilly etc.,

Brum Capacity : 5Kgs & 15 kgs
Fuel : Fire wood/Charcoal

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture: 83

190
 Roller Flaker

Main features:

• Heavy duty roller flaker works on the principle of pressing material in between
cylindrical rollers/grooved rollers to make flakes of material.
• Rollers are made of hardened special steel and machined with high precision.
• They are mounted on a robust and heavy structure to withstand enormous pressure and
vibration during operation.
• The gap and pressure between the rollers can be altered easily.
Applications: For flaking turmeric, paper, ginger maize fenugreek, herbal materials, etc.

Capacity: Flakers of various capacity are available and manufactured as per the customer

Requirement. Eg: Ginger – 200 to 1500 kgs/hour.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture: 206

191
 Spice Grinding Mill

Features:

1. Fine spice grinding mill is specially designed for fine grinding of various spices.
2. This spice grinding machine can handle various spices like chilies, turmeric, coriander, mixed
spices (for curry powder), dehydrated onions, garlic, ginger, black pepper etc.
3. It also grinds foodstuff & various ayurvedic herbs & roots.
4. To maintain the spice properties to its optimum level, a two stage-grinding operation is
recommended.
5. First stage coarse grinding with a 3 to 5mm screen followed by second stage line grinding
through a 0.5/0.8 mm screen.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture: 164

192
 Spice Plant

Silent features:

• Retention of important properties of spices like taste, flavor and colour.

• Maintains uniform quality of product.
• Easy and economical dust free operation.
• Wide range of production capacities.
• Easy and economical maintenance.
• Sturdy construction.
• Ready availability of spares.
• Reliable after sales service.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture: 164

193
 Spice Grinding Machine

Salient Features: -

• Retention of important properties of spices like taste, flavor and colour

• Maintains uniform quality of product.
• Easy and economical dust free operation
• Wide range of product.
• Easy and economical maintenance.
• Sturdy construction.
• Ready availability of spares.
• Reliable after sales service.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture: 272

194
 Fodder/Crop residue
management Machinery
S.N Name of Machinery for Fodder /Crop residue Management Page.No

1 Tractor operated Fodder Harvester 196

2 Forage Harvester 197

3 Cotton stalk Chopper 198

4 Maize grinding Mill 199

5 Maize Huller 200

6 Chaff Cutter 201

7 Forage Chopper 202

8 Sugarcane crusher 203

9 Food Chopper 204

195
 Tractor Operated fodder Harvester

PAU, Ludhiana center has developed and commercialized a flail type mower-cum-chopper for
fodder crop harvesting. In a single operation, the machine is capable of harvesting, chopping and loading
of fodder crops such as Maize, Bajara and Oats in a trailer, attached behind the machine.

Capacity of the machine: 0.20 ha/hr. at a forward speed of 2.5-4.0 km/h.

Cost of machine:Rs. 1, 25,000/- and its cost of operation is Rs. 1500/ha against Rs. 2000/ha by

Conventional method.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture: 71

196
 FORAGE HARVESTER

Main Features:
Forage Harvesters are ideal machines for harvesting fodder crops such as Maize, Sugar
Cane, Sorghum, and Sunflower. This machine operates on Systematic Single Row Plantations. It
cuts plant 3inches above the ground and in small cut length ranging from 2 mm to 22 mm size.
This equipment is 1 meter wide and is supported by wheels. It cuts fodder crops including Napier
grass, Napier, Tanzania,millet,oats,Sorghum, Soybeans. It cuts the grass from above the ground
and into very small sizes. This process ensures to preserve the contents of the crop.
Capacity: 1 meter width harvesting capacity.
Features:
• Wheel for supporting the machine to run on ground
• System of transmission by chains or belts
• System of regulating the height of roller picker

Specifications:
Width of the harvest 1 meter
Weight 170 Kgs
Weight with Harvester 720 Kgs
Production Up to 20 Tone/Hrs
Minimum height of cut (flat) 5 Cms
Power of Tractor 50 H.P
Speed work 10 Kms./Hr

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture: 202

197
 COTTON STALK CHOPPER

Cotton Stalk chopper is ideal machine to clear the cotton stalk from the fields. Farmers
can put Cotton Stalk grown on their field to a better use rather than burning it in the fields.

Features:
• It cuts the cotton stalk from above the ground and shreds the whole plant in small sizes.
• It can cut the cotton plant in uniform size ranging from 2 mm to 22 mm.
• The cotton stalk plant can be collected in a trolley for further use to manufacture
briquettes white coal.
• It requires 55 - 65 hp tractors.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture: 202

198
 MAIZE GRINDING MILL

Maize Grinding Mills are specifically manufactured for grinding thrashed maize or maize
with cobs and straw, cereal husk and various other type of dry grains.

Features
• Our Maize Grinding Mill is durable & long lasting in nature.
• It can be easily maintain & function with great amount of precision.
• It can be easily installed and does not require skilled manpower.
• It has been specially designed and engineered by our talented engineers to reduce load
factor.

• Technical Specifications:

Item Code H.P. Required R.P.M. Output Capacity

MM 20 8 - 10 3600 270 - 450

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture: 202

199
 MAIZE HULLER

Main features:

• Maize Huller Polishes Maize by removing the Bran (Outer Layer) through friction as it
passes through the chamber between the EMERY ROLLER and Standard Size Sieve.
• Maize Hullers require low maintenance and lower operational costs and does not need
any skilled labour force to operate the machinery.
• Superior quality emery roller polishes maize and removes the bran with ease and it lasts
for years.
• These machines are specially designed to give high output with low power consumption.

Technical Specifications:

Item Product H.P. R.P.M. Output

Code Required Capacity*
MH Marina Maize Huller 8 - 10 700 800 - 1000
300 Without Prime Mover Kg/Hr

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture: 202

200
 CHAFF CUTTER

Main features

• Marina Chaff Cutter is an ideal farm machine for farmers having few livestock.
• It is durable, long lasting and low maintenance machine.
• It cuts the fodder uniformly, which is ideal for the livestock.
• It improves the digestion of Cattle yielding more milking output capacity.
• It reduces wastage of fodder.
• Durable
• Long lasting & Functionally Superior
• Does not require continuous maintenance
• Superior Quality Blade for longer run

Technical Specifications:

Item Product H.P. R.P.M. Output Approx.

Code Required Capacity* Cutting
Size*
MC- Electric 1 - 1.5 100 250 - 300 1/2"-1"
02 motor/Petrol
Kerosene Engine
Driven Chaff
Cutter
List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture: 202

201
 Forage Chopper

Main Features:

• Forage Chopper is an ideal farm machine for farmers having Large Scale Cattle Farm.
• This machine can cut both Dry and Green Grass
• It is durable, long lasting and low maintenance machine.
• It cuts the fodder uniformly, which is ideal for the livestock.
• It can cut in 2 different Sizes of 5mm and 10mm length
• Superior Quality blades are used to reduce the wear and tear and longer use.
• It helps improve the digestion of Cattle yielding more milking output capacity.
• It reduces wastage of fodder.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture: 202

202
 SUGARCANE CRUSHER

Main features:

• Marina Sugar Cane Crushers are ideal machines to extract Sugar Cane juice with uniform
extraction rate
• They are sturdy machines in tough working conditions and have proven their quality with
low maintenance and reliability.

Technical Specifications

Cane Crushing capacity/hour* 750 - 1000 Kgs

Extraction 60 - 65 %
Power requirement 10 H.P
Speed of Driving Pulley 250 R.P.M
Size of Pulley 30" X 4. ½"
King Roller 8. 5/8" dia X 8. ½"
Crushing Roller 6" dia X 8. ½"
Extracting Roller 6. 1/8" dia X 8. ½"
Net weight 615 Kgs
Gross weight 750 Kgs

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture: 202

203
 Food Chopper

Features:

• This Food Chopper has been specially designed for granulating & cutting various
materials like foodstuffs, agro products, Ayurvedic herbs etc. into small pieces of
required size with minimum of powder content.
• In Electric Food Chopper there is no heat generation while grinding thereby
retaining important properties like aroma, taste, flavor & colour.
• Some typical applications for mini food chopper are making crushed chilies for pizza
toppings, chopped / minced / granulated onions; tea-cut senna leaves, granulating
• of food colours, gum, asafoetida, crushing of various ayurvedic herbs etc.

List of Manufacturers: Please refer to Page-222-248 as per following

Manufacture: 164

204
 List of Manufactures
SI. Name of manufacture Phone no./Fax/E-mail
No.
1 12-2-799/2, G-2, Jandar Nagar, Telephone: +91 40 65974111
Mehdipatnam
Hyderabad, Andhra Pradesh- 500 028, India
2 A P State Agro Industries Development Ph: 040-23391331, 23314246
Corporation 504, Hemitage Office Complex
Hill Fort Road Hyderabad – 500 004
3 Abudul Kuyum Makkad Iron and Welding
Works, Post Paroli Kotadi, Bhilwara
4 Acharaya N.G. Ranga
Agricultural University,
Rajendra Nagar, Hyderabad – 500 030 (A.P.)
5 Adarsh Krushi Engg. Works National highway
no. 6 Muktai Nagar Road, Malkapur
6 Agro Commercial, 8 A, Camac Court, 25 B, Ph: 033-22874206
Camac Street, Kolkata – 700016 Fax: 033-22874139
Mob: 9339872177
Email: [email protected]
Web: agrocom.in
7 Agro Equipments 24 B/1B, Ph: 033-22450894, 22444689
Dr. Suresh Sarkar Road Mob: 9433090577
Kolkata – 700014
8 Akhtri Agriculture Works Ph: 05947-278977, 279764
Muradabad Road, Kashipur (U.S. Nagar)
9 AKRITI, Ph: 06642-229095, 229336
At/P.O. Bamra, Mob: 9437051336
Dist- Sambalpur – 768 221 Email:[email protected]
Web: www.lathakriti.com
10 Almighty Agrotech Pvt. Ltd.17, Bhaktinagar Ph.: 0281-2462289, 2462528
Station Plot, Rajkot – 360 002 Fax: 0281-2462529
Email: [email protected]
11 Amar Agricultural Implements Works, Amar Ph: 0161-2491780, 2493128
Street, Janta Nagar, Gill Road, Ludhiana – 141 Fax - 0161 –2491780
003 Mob: 9872018040
Email: [email protected]
12 AMB Agrotech, Harish Colony
Near S R Patil College, Akola
13 Ambica Engineering WorksN.H.No. 8, Ph: 02621-52110
Navagam, Opp. Agro Petrol Pump Kamrej Fax: 02621-51110
Char Rasta Dist. Surat – 394 185
14 Anand Agritech Ph: 08472-268128
Nehru Gunj Gulbarga – 585 104 Fax: 08472-277249
Mob: 9448457521
Email: [email protected]
15 Anjani Engineering Works27 A Mohite
Industrial Estate Wanadongri, Hingna Road, Mob: 9822457946
Nagpur – 440 016 Email: [email protected]

205
16 Anusham Farm Machinery & Power Equipments Ph: 04285-224251, 224139, 329660
Pvt. Ltd. 232, Sathy Road (Opp. Court) Fax: 04285-227137
Gobichettipalayam Mob: 9443305117
Erode – 638 452 Email: [email protected]
17 Arcad Fertilizers Pvt. Ltd.101/102 Bramha Ph: 020-32947307
Garden Bund Garden Road Fax: 020-26124590Mob: 9822016165
Pune – 411001 Email: [email protected]
18 Arun Industries Ph: 040-24362338, 24360486
118-B, Industries Estate, Kattedan, Hyderabad –
500 077
19 AS Agencies, Ph: 080-22237877, 22234057
7, KS Lane, SJP Road Cross, Bangalore-560 002
20 Asha Agro-Industries
Ph: 07562-252355
Lotiya Naka, Indore Raod, Sehore
21 Ashok Agriculture Industries Works, Churu Bus Ph: 01561-2241270
Stand ke pass, Taranager, Churu
22 Ashok Engineering Works,
Ph: 07562-253374
Old Bus Stand, Sehore
23 Ashrfi Engineering Works Gandhi Nagar, Mob: 94143969152
Chittor Gadh
24 Aspee , Mumbai

25 Atlas Rolling Shatter Badalee ka chabutra

Jalarapatan, Jhalawad
26 Avtar Kalsi Agro Works, Ph: 01632-231055
Moga Link Raod, Talwandi Bhai, Distt. Mob: 9814692997
Ferozepur
27 Avtar Singh & Sons Near Railway Crossing Ph: 01675-240479(O); 240278 (R)
Ahmedgarh – 148 021Sangrur (Punjab) Mob: 98142-46278
28 Avtar Kalsi Agro Works, Ph: 01632-231055
Moga Link Raod, Talwandi Bhai, Distt. Mob: 9814692997
Ferozepur
29 B.L. Industries Corporation, G - 1 45 Malupara, Ph: 01437-225335
Tonk
30 Babu lal Jagida and Compny Sinadari Road, Ph: 0284-294345
Badamer
31 BCS India Pvt. Ltd, Manngarh, Kohara-
Machhiwara Road, P.O. Kohara, Dist.
Ludhiana – 141 112
32 Bengal Tools Ltd., Ph: 033-39843984
Shrachi Tower, 686, Anandapur Mob: 9830458107
E M Bypass – R.B. Connector Junc. Fax: 033-39844249
Kolkata – 700 107 E-mail: [email protected]
33 Bengal Tools Ltd., (Agro Divn.)
2, Jessore Road,
Dum Dum, KOLKATA – 700 028

34 Benson Agro Engineering Ph: 0253-2354653, 2574932

C-8/2, NICE Area, 'A' Road, MIDC, Satpur, Mob: 9822398240
Nasik – 422007 Email: [email protected]

206
35 Beracha Engineers,
2-B, Tagore Street, PN Pudur, Coimbatore-641
041
36 Bhagwati Enterprises G-11-12 Aanda Plaza, Ph: 0294-2410813
Ayad puliya, Udaipur
37 Bhagya Organic Manures and Implements, No.4, Ph: 0836-2390949
Kishi Complex, Savadatti Road, Dharwad-580
005
38 Bhansali Trailors Pvt. Ltd. Dhantara, Ph: 02423-223391, 92, 93
Gurudwara Road Tal. Kopargaon Fax: 02423-23394
Dist. Ahmednagar (Mahrashtra) Mob: 9822439621, 9372719494
Email: [email protected]
Web: www.bhansalitrailors.com
39 Bhanumathe Agencies, Ph: 0422 - 4996653
68, Nehru street, Ram Nagar, Coimbatore – 641 Mob: 98433094587
009
40 Bharat Agro Agencies Nehru Gunj Ph: 08472-257447, 655578, 220947
Gulbarga – 585 104 Email: [email protected]
41 Bharat Agro Equipments Phone:91-135-2721531
Vidya Vihar, Phase-2, Near Kargi Chowk,
Dehradun - 248002, Uttaranchal, India
42 Bharat Industrial Corporation Akalsar Road, Ph: 01636-224075, 222075
Moga – 142 001 Fax: 01636-224076
Mob: 98140-69075, 9878029075
Email: [email protected]
43 Bharat Industries
c/o M/s Bharat Steel Discs, Delhi Bye-pass , Ph: 2220262, 2221555, 2200804, 2201918
G.T Road, Karnal
44 Bharat Krishi Yantra Udyog Ph: 07592-408055/408031
8, Audyogic Sansthan, Pital Mill, Vidisha Mob.: 9826294216, 9425483416
Web: www.jaikishankrishiyantra.com
45 Bharath Farm Implements, PO Box No.11, 126, Ph: 0422-5521222,
Tirupur Road, Udumalpet-642 126
Mob: 9842265180, 9894023892
Email: [email protected]
46 Bharath Foundry & Engineering Works, D-2 Ph: 08394-232240, 232154
Shed, Industrial Estate, TB Dam Road,Hospet- Fax: 08394-232113
583 203, Bellary Dist.
47 Bharti Krishi Udyog, 24, Industrial Estate, Bina – Ph: 07580-22038
470 113
48 Bhavani Industries, Gumbaz Road, Ganjam Ph: 08236-652410, 652702
PO, Srirangapathna-571 143, District: Mandya
49 Bhoraste Agro Implements Ph: 02550-251222
B-187, Shri Samartha Sahkari Audyogik
Vasahat Ltd.
Pimpalgaon Bk. Mukhed Road
Tal. Niphad Dist. Nashiks
50 Bhuvana Enterprises, Ph: 0422 – 2231956, 2233632
533, Near Kavitha theater, Fax: 0422 - 2537726
Kasthuri bhavan hotel, I st floor, Email: [email protected]
Ram Nagar, Coimbatore - 641

207
 009
51 Bijapur Engineering Works Dattatreya Road Ph: 08372-237466
Gadag – 582 101 Mob: 9448136047
52 Bilal Engineering Works Ph: 08192-270519
#78-2L, Behind Onion Market Bilal Mob: 9845050008, 9844377866
Compound,
P.B. Road, Davangere – 577 002
53 Birar Equipments Ph: 0253-2350148
Plot No. B-21, Street No. 4 Nasik Industrial Co- Fax: 0253-2341473
op Estate Satpur, Nashik – 422 007 Mob: 9822258471
54 Birla Power Solutions Ltd.,
H.O.: 901, Bhikaji Cama Bhawan,
11, Bhikaji Cama Place,
New Delhi – 110 066

55 Bothara Foundry & Machines Works, Plot No. Ph: 0241-2551932

34 to 40, Industrial Estate Nagar Pune Road,
Ahmednagar
56 Brahmpuri Agricultural Implements A-188 (b), Ph: 0141-2331549, 5107430, 2332239
Road No. 6D, Vishwakarma Industrial Area Fax: 0141-2332631
Jaipur – 302 013 Email: [email protected]
[email protected]
Website: www.brahmpuri.com
57 Captain Tractors Pvt. Ltd. Ph: 0281-2228216, 2240501Email:
106, Royal Complex, Dhebar Road, Ralkot – [email protected]:
360002 captainminitractors.com
58 Charbhuja Agro Industries Ph: 0145-2600274
Praksh Nager, Fay Sagar Road, Ajmer
59 Charbhuja Welding Works Salavatiya Bijoliya, Ph: 01489-236400
Bhilawara
60 Chaudhary Engineering Works, Ph: 07581-240595
Rahatgarh Road, Khurai, Sagar
61 Chhabra Machinery and Auto Centre, Damoh

62 Chudekar Industries Ph: 022-64234707

Plot No 77, Sector 1-S Road No. 2New
Panvel – 410 206
63 CIAE Bhopal, (M.P.)

64 Dashmesh Agri. Works, Raikot Road, Ph: 01675-251726

Malerkotla, Distt. Sangrur - 148 023 Mob: 9817053726
65 Dashmesh Mechanical Works, Nabha- Ph: 01675-284221,Mob: 98151-74313
Malerkotla Road, Amargarh, Distt. Sangrur- Fax: 01675-285999Email:[email protected]
148022
66 Dayananda Engineering Works No. 768 Old Ph: 0823-2224158, 2224248
MC Road (Holalu Circle), Mandya – 571 401
67 Deccan Farm Equipment Pvt. Ltd., C-35, Ph: 0230-2468904
M.I.D.C. Shiroli Fax: 0230-2468905, 2469002
Kolahapur – 416 122 Email: [email protected]
68 Department of Farm Machinery Ph : 0422-5511257;
Agricultural Engineering College and FAX : 0422-2456478

208
 Research Institute E-mail: [email protected]
Tamil Nadu Agricultural University
Coimbatore - 641 003.

69 Dharti Agro Engineering (Shaper) Survey No- Ph: 02827-252258, 52220

35, Plot No-6, Near Saurashtra Paper Board, Email: [email protected]
Gondal Road, Shapar (veraval), Rajkot-2
(Gujarat)
70 Dhinjal Agricultural Ph: 07524-222223, 223376
Industries, Gurudwara Road,
Dabra, Gwalior
71 Dr. Jaskaran Singh Phone No: 0161-2408684(O), 2455433
Sr. Res. Engineer, Department of Farm FAX: 0161-2408684/24009455
Power & Machinery, PAU, Ludhiana – Mob. 098150671133
1410044
72 Droli Agriculture Works, Majestic Road, Ph: 01636-223101,226031
Moga – 142001
73 Droli Industries (Regd) (BASANT), Near Ph: 01636-223557
Dhaliwal Hospital, Majestic Road, Moga-142001 Mob: 98140-29811
Email: [email protected]
74 Droli Mechanical Works Near Majestic Cinema, Mob: 98413-60027
Majestic Road, Ph: 01636-223487
Moga-142001
75 Elahi Engineering Works,
PB Road, Hiriyur, District : Davanagere
76 Escort Ltd., Agricultural Machinery Division18/4 Ph.: 0129-2293922
Mathura Road Fax: 0129-2268876
Faridabad – 121 007 Website: escortsagri.com
77 Everest Industries Ph: 04252 – 224338
122-A, Palani Main Road, Mob: 98430 24339
SV Mill (PO)-642 128, Udumalpet
78 Falcon Garden Tools (P) Ltd. Tel.: +91-161-2811899
Alamgir, Malerkotla Road, Ludhiana-141 116 Telefax: +91-161-2812144
(INDIA) Email: falcongardentools@rediffmail.

79 Farm Impalements (India) Pvt. Ltd., Website: www.fiipl.in

13, Kumarappa Street, Nungambakkam, Email: [email protected]
Chennai-600 034 Phone: 2826 1676, 2827 3493, 4213 7084
Fax: 91-44-2826 5345, 2823 5007
80 Farm Implements (India) Pvt. Ltd., 13, Ph: 044-28261676, 28273493, 42137084
Kumarappa Street Fax: 044-28265345
Nungambakkam Email: [email protected]
Chennai- 600 034 [email protected]
81 Farmer tractor, E-mail: [email protected]
Metoda G.I.D.C.,
Plot No. G-2779,
Road No. 1-2/1-3, Kranti Gate,
Distt. Rajkot (GUJARAT)
82 Fortune Agro Equipments Mob: 9448396291, 9448395466
#35, ist Main, Lower Palace Orchards Email: [email protected]
Sadashivanagara

209
 Bangalore – 560 003
83 Four Brothers Ex-Imp Pvt. Ltd Tel: +91- 44 - 4216 3224,
Old No. 123 New No. 255, Telefax: +91 - 44 - 4216 7724,
Linghi Chetty Street, Mobile: +91 - 99401 66232.
Chennai - 600 001 ( India ) Website: www.fourbrothersei.com /
www.bossmachines.in
Email: [email protected] /
[email protected]
84 G. T. Road, Fatheabad Mob: 9896179002, 9416106150, 9416622749

85 Ganesh Agro Equipments Phone: +91-2764-273442/2677446

Kalol-Mehsana Highway, Vadpura, Dist. Mobile: +91-9925031817, +91 9898615911
Mehsana-382705, Gujrat, INDIA Email: [email protected]
Website: www.ganeshraj.com
86 Ganesh Agro Machinery Enterprises
Ph: 08818-227203
Tadepallygudem, West Godavari district
87 Ganga Motors Ph: 033-22110604, 22116109
Farm Equipment Division23 Ganesh Chandra Fax: 033-22158432
Avenue, Kolkata – 700 013 Email: [email protected]
Web: www.gangamotors.in
88 Garib Nawaj Engineering Company, Gandhi Mob: 9314112457
Nagar, Chittor Gadh
89 Gayatri Engineering Works, Ph: 0815-2225045, 2358209
Near Hospital Chowk, Bangarpet Road, Kolar-
563 101
90 Govind Industries Pvt. Ltd., Ph: 05248-223056, 227285, 229327
Lucknow Road, Near Railway Crossing, Mob: 9415142894, 9415048612
Barabanki – 225 001 Email: [email protected]
91 Greaves Cotton Ltd. Ph. 022-25264646, 25264723, 25264720
Corporate Park II, 4th Floor, Sion-Trombay Fax: 022-25262622, 25264800
Road, Chembur, Mumbai - 400071 E-mail: greavesmail.com/bg2
92 Greaves Cotton Ltd.16/3, All Asker Road, Ph: 080-22262062, 22262501/5
Bangalore – 560 052 Fax: 080-22253472
Web: greavescotton.com
93 Green Field Agro Equipments 41/6 Vikrant, Mob: 9324297960/62/63, 9892828388
Ground floor Manisha Nagar, Kalwa Fax: 022-25426459
Thane - 400605 Email: [email protected]
Web: hararamaplastic.com
94 Gujarat Agro Engineering Ph: 02827-296195
Survey No-34, Plot No-13, Shantidham Bus Mob: 98799 16607, 98257 68595
Stop, Email: [email protected]
Gondal Road, Shapar (Veraval) Rajkot –350 024
95 Gursukh Agro Works Ph: 01628-262422
Vill. Jhakroudi, P.O. Samrala, Ludhiana – 141 Mob: 9417100150
114 Email: [email protected]
96 Guru Nanak Agricultural Implement Mfts., G.T. Ph: 0181-2602670, 2600040
Road, Bypass, FAX: 0181-2602670
Near Focal Point, Mob: 9855894015
Jalandhar – 144 004 Email: [email protected]
97 Guru Nanak Iron Industries N H 26, Lalitpur Ph: 0510-2740649
Road Fax: 0510-2740649

210
 Babina Cantt Mob: 9415412037
Email: [email protected]
Web: www.gnagro.com
98 Guru Nanak Krishi Udyog, Ph: 01741-220247, 220710
Kaithal Road, Main Chowk, Pehowa
99 Gurudatta Agro Agencies & Services Ph: 020-24263350
36, Krishi Udyog Bhavan Market Yard, Pune Mob: 9822111294
– 37
100 Gurunanak Industries Sales Corp. Near Tinkoni, Ph: 01652-232998
Opp. BDO Office, Mansa -151 505 Fax: 01652-500998
Mob: 9316660082
Email: [email protected]
[email protected]
101 Gurupal Agri. Works Ph: 05944-244594, 250969
Industrial State, Rudrapur (U.S. Nagar)
102 Hariom Agro Industries Ph: 0281-2368105
Nehrunagar Main Road, Atika SouthThebar Mob: 9879655500, 9925151483
Road, Rajkot
103 Harjinder Agricultural Industries, Jhansi Road, Ph: 07524-222347
Dabra, Gwalior
104 Haryana Krishi Udyog, Hansi (Hisar) Mob: 9812005615

105 Henan Kingman M&E Complete Plant Co., Email:[email protected]

Ltd (KMEC) TEL: 0086 372 5080869 (China)
Suite A, 4/F, Jinhao Business Bld., Renmin FAX: 0086 372 5910386 (China)
Rd. Anyang, Henan, China PC:455000

106 HIMAGRICO Implements and tools, H.P.

Agro Industries, Jassur, Kangra
107 Himani Agro Industries Ph: 0724-2451892
3, Near RTO Office, Murtizapur RoadKrushi
Nagar, Akola
108 Hind Engineering Works, Ph: 01632-230110, 556650, 556653
Near Rly Crossing, Talwandi Bhai, Distt. Mob: 9417424978
Ferozepur
109 Hindustan Metal E-34, I P E A, Kota Ph: 0744-2422701

110 Hi-tech Engineering Co., Fax: 080-22863122

Karnala Mansion, Ground Floor, 143, Infantry Mob: 98451-95168
Road, Bangalore-560 001
111 Hrushikesk Agro Machinery Co.N-7, A-4/1, Ph: 0240-2486610
Garware Company, CIDCO, Aurangabad – 431 Mob: 9373445241, 9890145241
003 Email: [email protected]
112 Imaliwala Agrico Ph: 01488 233022
Mahammad Kamal Post- Paroli, Kotadi,
Bhilwara
113 Incon Engineers Limited,B-6/3, IDA Uppal, Ph: 040-27204034, 27201271
Hyderabad – 500 039
114 India Engineering Works Toda Road, Malpura, Ph: 01432 288610, 288610
Tonk

211
115 Indian Institute of Sugarcane Research Ph: 0522-2480726
Raibareli Road, P.O. Dilkusha, Lucknow - Fax : 0522-2480738
226 002 Email: [email protected]
116 Indo German Agricultural Sprayers & Pressing Ph: 0161-2749507, 2749508
Works, Near Punjab Cold Storage, G T Road, Fax: 0161-2745366
Ludhiana – 141 008
117 Indtec Elektro Control
F-15, Focal Point, Phagwara Road,
Hoshiarpur –146 001
118 Jai Guru Industries Ph: 05944-243508,
Industrial State Rudrapur (U.S. Nagar) Mob: 983704003
119 Jai Kisan Equipment Pvt. Ltd. Plot No. 14 (1), Ph: 08482-232040, 232255, 227979
Kolar Industrial Area, Bidar – 585 403 Email: [email protected]
120 Jain Agriculture Implements, Ph: 05947-274046,
Ramnagar Road, Kashipur (U.S. Nagar)
121 Jandu Agro IndustriesB-36, Focal Point, Ph: 01636-221955, 224434
Moga – 142 001 E-mail: [email protected]
122 Jandu Industries Ph: 01636-223204
Majestic Road, Moga – 142 001
123 Jangid Agro Industries
Deeg Gate, Kama, Bharatpur
124 Jay Bajrang Industries
3, Navagam Udhyog nagar Mob: 9377771133, 9825130851
N.H. 8, Kamrej Char rasta Ta. Kamrej Dist. Email: [email protected]
Surat – 394 185
125 Jay Shakti Engineering Works NesdiRoad, Ph: 02845-243394, 242394
Savarkunda – 364 515Dist. Amreli Mob: 9426456998
126 Jayessar Equipment Private Limited, E-mail: [email protected]
91-C, Chinnasamy Naidu Road,
New Sidhapudur,
COIMBATORE – 641 044
TAMILNADU (INDIA)
127 K.B. International Website: kb-international.co.in
47, G. B. Road, Delhi-110006 (India) Email: sales@kb-
international.co.in
128 Kaka Trading Company, Gaitond Complex Telefax: 08482-225414
Old Bus Stand Road Bidar – 585 401 Mob: 9886676116
Email: [email protected]
129 Kaleem Engineering Works Mob: 9448656102, 9448656098
Regulated main gate, Taluk Society
Compound, R.M.C. Link Road,
Davangere – 577 003
130 Kalpana Enterprises Ph: 0294-2491364
NB Complex Plot no. 48, Pratap Nagar Thane ke
Pass, Udaipur – 313001
131 Kalsi Fabricators, G.T. Road Shahbad Mob: 9896259290

132 Kalsi Udyog, Ph: 01744-240058, 240478.

Shahbad Markanda.-136135 Mob: 9812086955
133 Kanhaiyalal Ramratan Krishi Yantra Lghu Mob: 9829195072
Udyog , Bus Stand, Rampura Dabadi, Sikar road,

212
 Jaipur
134 Karnataka Village & Agro Industries, Davangere Ph: 08192-270303
–577 002 Mob: 9880829156, 9449649610
135 Karshak & Sons Ph: 040-27542315
Shop No. 42, All Karim Trade Centre, M G
Road Secundrabad – 500 003
136 Karshak Industries Ph.: 040-24384680, 24382841
18-3-14, Chatrinaka, O/s Laldarwaza, Hyderabad Fax: 040-27542353
– 500 053 (AP) Mob: 040-56464680
137 Kartar Engineering Works, G T Road, By Pass Mob: 9814533526
Near Pathankot Chowk, Jalandhar.
138 Kartik Enterprises Pvt. Ltd. B-20,Industrial Ph: 0671-2344254
Estate,
Cuttack-753010
139 Kashipur Agriculture Implements New Anaj Ph: 05947-278977
Mandi, Muradabad Road, Kashipur (U.S.
Nagar)
140 Kasim Ali Fabricators
Lal temple ke pass Jalarapatan, Jhalawad
141 Kavi Agro Agency, E-mail: [email protected]
60/8, St. Anne's Complex,
Melapudur, Trichy, Tamilnadu - 620 001
142 Kerala Agro- Machinery Corpn. Ltd ,
Marketing Division Athani – 683 585,
Distt. Ernakulam (Kerala)
143 Khalsa Farm Equipments,
Dasmesh Nagar, Baghpat Road, Meerut - 250
002
144 Khedut Agro Engineering Plot No. 6, Survey Mob:9426206420
No. 191 Shantidham Society Road Near Orke Ph: 02827-253312
Farm, Veraval (Shaper) Email: [email protected]
Ta. Kotada Sangani, Dist. Rajkot
145 Kisan Agro Industries Ph: 02186-224748
Korli Road, Near Warehouse Pandharpur – 413 Mob: 9422553334
304
146 Kisan Blower Udyog Mob: 9422250906, 9422274242
Kikwari (K), Taluka-Satara, Dist. Nasik
147 Kisan Engineering Works, Asnawar, Jhalawad

148 Kisan Kraft Machine Tools Pvt. Ltd.32/5 C, Ph: 080-65461434

Dasarahalli Main Road H.A. Farm Post, Fax: 080-22331583
Hebbal Bangalore – 560 024 Mob: 9008602201, 9008602202
Email: [email protected]
149 Kishan Agro Engineering Narmda Pipe Road Mob: 9825450676, 9825271967
Near Mahendra Mill Ph: 02827-252385
Survey No. 211, Plot No. 4Veraval (Shaper),
Dist. Rajkot
150 Kishan Dust Machine Manufacturing Unit, Ph: 08474-364058, 365887
KPTCL Road, Sahabad Tal. Chitapur, Dist.
Gulbarga
151 Kovai Engineering Works (P) Ltd.,88-A, Iyer Ph: 0422-2316456, 2317776
Mob: 93448-36456

213
 Hospital Road, Email: [email protected]
Near Kannapirah Mills,
Sowripalayam post,
Coimbatore – 641 028
152 Krishi Yantra Laghu Udyog Nohar, Ph: 01555-222588
Hanuman Gadh
153 KSK engineering College Road, Banswara - Mob: 9414101135
327001
154 KSNM Marketing, SF No. 29/1B, Ona Palayam Ph:0422-3251175
Siruvani Water Line Road Dheenam Palayam Mob: 9363261175
Post Email: [email protected]
Coimbatore – 641 109
155 Kubota Agricultural Machinery India Pvt. Ltd., Ph: 044-42994237
Regus, Level 2 Altius Fax:044-42994309
Olympia Tech Park, No. 1, SIDCO Industrial Mob: 9600057886
Estate, Guindy Email: [email protected]
Chennai – 600 032
156 Kumaresh Agencies Ph: 0422-2231956, 2233632, 2528087
518, Nehru Street, New Kavitha Theatre Fax: 0422-4377726
Coimbatore – 641 009
Email: [email protected]
157 Kushwaha Engineering Works Mob: 9199754825, 9905874770, 9939978575
Raja Bazar, Bihiya, Bhojpur – 802 151
158 Lakshmi Agro Industries, Ph: 0755-5256341, 5256936, 2738647
51, Hamidia Road, Bhopal – 462 001
159 Lakshmi Industires, Ph: 0755-2735543
4, Industrial Area, Chola Road, Bhopal – 462
038
160 Lakshmi Industires, Ph: 0755-2735543
4, Industrial Area, Chola Road, Bhopal – 462
038
161 Lalwani Industries, Ph: 0755-2533901, 2523932, 2586596
Lalwani Compound, Hamidia Road, Bhopal –
462 001
162 Laxmi Steel Fabs Ph: 0755-4251793, 2743375
Nishatpura, Berasia Road, Bhopal – 462 008 Fax: 0755-4259468
Mob: 9893698525, 9425007929, 9993187595
163 LCT Feeders' (P) Ltd.
6-158, SLNS Colony, Balapur 'X' Roads,
Meerpet, Ranga Reddy Dist. – 500079
164 Lithotech Engineers
7, Poonam Industrial Estate, Navghar, Vasai
Road (East)
Thane , Maharashtra- 401 210 , India

165 Ludhiana Road, Mandi Mullanpur Dakha - 141

101
Dist. Ludhiana
166 Lynn

167 M P Iron Industries

Kaji Camp, Behind Zdi Hotel

214
 Berasia Road, Bhopal - 462 038
168 M/s Ganga Motors,
23, Ganesh Chandra Avenue,
KOLKATA – 700 013
169 M/s Apas Export Pvt.Ltd.,
52 A, Shakespear Savasni
3rd Floor,
KOLKATA

170 M/s Dogar Tools Pvt. Ltd.,

Niwas , Station Road,
RAIPUR – 492 009

171 M/s Greaves Ltd., Industry

Manor, Appasaheb Marathe Marg,
Prabhadevi, MUMBAI – 400 025

172 M/s Incon Engg. Ltd.

B-6/3, IDA Uppal, Hyderabad – 500 039
173 M/s Khazana Agricultural Equipment Ltd., Phone: 033-2210 2765, 2242 6763
Aparna Business Centre, T.S.-2,
5, Clive House, Strand Road,
KOLKATA – 700 001
174 M/s Rajda P&P Corporation, Chatterjee
International Centre, 33, A, Jawaharlal Nehru
Road, KOLKATA

175 M/s VST Tillers & Tractors Ltd., P.O. Box

No. 4801,
Whitefield Road, Mahadevapura P.O.,
BANGALORE – 560 048
176 M/s. Bharat Engineering Company Near
S.T. Depot, Ta.: Jasdan,
Dist. Rajkot – 360 050 (Gujarat)

177 M/s. Kovai Engineering Works 88-A, lyer

Hospital Road, Near Kannapiran Mills
Sowripalayam (PO) – 641 028,
Coimbatore (T.N.)
178 M/S. Padgilwar Agro industries, 192-
Wardhaman Nagar , Nagpur-44008
179 M/s. Taizhou Fengtian Machine Co. Ltd.,
Sanjia Industry zone, Taizou city, Zhejiang
province, China
180 M/s. Vinod Kumar & Virendra Kumar (Dekhi Phone: +81-5924-273176, 274276
Wale) Fax: +91-5924-273176
Mandi Dhanura-244231 Distt. J.P. Nagar Email: [email protected], [email protected]
(UP) India Website: www.bestashokaimplements.com

215
181 MA Durga Agro-Tech Pvt. Ltd.NH-57, Near
Fly Over, Mabbi, Darbhanga Ph: 06272-320026
Mob: 9334169350, 9204655800
182 Maax Engineering, No. 24, Vandikaran Street, Phone: 91-44-43846150/ 65385608/
maduvinkarai, 24330041/ 32500041
Chennai - 600035, Tamil Nadu, India

183 Madan Engineering Works Station Road Ph: 01581-222199

Jadanu, Nagpur
184 Madho Agro IndustriesB-3, Industrial Focal Ph: 01636-226135, 329906, 220106
Point, Moga-142001 Fax: 01636-226135
Mob: 98151-34421, 98155-33106
Email: [email protected]
Web: www.madhoagro.com
185 Madhur Agro Equipments Pvt. Ltd. 34, Friend
Colony, Chambaghat, Solan
186 Madhur Sparayer & Steel works, Near LIC
office, The Mall, Solan
187 Mahalaxmi Enterprises, Kalgatagi Road Mob: 9448145720, 9448355721
Dharwad
188 Maharaja Engineering Works, Sangamner Road, Ph: 02422-210968
Dattanagar, Shrirampur – 413 709 Mob: 9822091168
Dist. Ahmednagar
189 Maharashtra Agro Industries Dev. Cporpn.,
Ltd., Ranjan House, 3rd Floor, Prabhadevi,
MUMBAI – 25
190 Mahendra Agro Industries, G.T. Road, Hodal
(Haryana)
191 Mahesh Engineering Works Bus Stand, Barlut, Ph: 02972-260578
Sirohi
192 Malaiya Agro Engineering Pvt. Ltd., 14/A, Sector
D-1, sanwer Road Industrial Area Indore – 452 Ph: 0731-224686, 721005
015
193 Malwa Agro Industries Ph: 01652-228698
Opp. BDO Office, Link Road Mansa - 151505 Fax: 01652-500998
Mob: 9876126998
Email: [email protected]
194 Maxtone Petrochemicals1A, Merlin Besara, Ph: 033-24546419/4006-4071
13B, Ramesh Mitra Road Kolkata – 700 025 Fax: 033-24546421/4006-4071
Mob: 9831080998
195 Mekins Agro Products Pvt. Ltd. Plot No. 5, IDA, Ph: 040-23085959
Gandhinagar, Balanagar,
Hyderabad – 500 037
196 Metal India Ph: 0744-2362732
E-135, 136 Industrial Area, Kota
197 Metaplast Industries Ph: 0671-2344040
Kalyaninagar, Cuttack-753010 Dist – Cuttack Fax: 0671-2345035
198 Mineral Metal Centre, 37, NS. Road,
KOLKATA
199 Modern Industries Ph: 01882-251636,251942
52 Industrial Estate, Jalandhar Road, Fax-01882-250236, 2202059
Hoshiarpur-146001

216
 Email: [email protected]
200 Modi Industries, Ph: 07581-240540, 240840
Bhusa Mandi Road, Khurai, Sagar
201 Mr. Anirban Burman Telephone: +91 33 23342787/40043866
C. B-59, Sector -1, Salt Lake City,
Near P. N. B. Tank, No. 2,
Opposite Mafatlal Showroom
Kolkata, West Bengal – 700 064, India
202 Mr. Damil J. Patel Telephone: +(91)-(79)-25350187/ 25380512
Near Kashiram Textiles, Narol
Ahmedabad, Gujarat - 382 405, India
203 Mr. H S Bhanu Prakash Phone: 011-8172-267095
B. M Road, Hassan, Karnataka, India Fax: 011-8172-256038
Pin Code: 573201 Email:[email protected]
Web Site: http://www.vmacindustries.com
204 Mr. Satish Movaliya Telephone: + (91)-(2827)-252547/ 253916
Padavla Road, Taluk Kotdasangani,
Veraval, Shapar Rajkot, Gujarat -
360 002, India
205 Mr. Sobraj Jain Tel: +91 80 41234480/ 42035108
No. 2, A. S. Char Street, Chickpet Circle,
B. V.K. Iyenagar Road Bengaluru,
Karanataka – 560 053, India
206 Mr. Syed Nisar Ahamed Tel: +91 40 65974111
12-2-799/2, G-2, Jandar nagar,
Mehdipatnam,
Hyderabad, Andhra Pradesh – 500 028,
India

207 Mukesh Trade Link Ph.: 0294-2561384, 2420088

217, Emerald Tower, Ashwini Bazar, Mob: 9414156384, 9414343678
Email: [email protected]
Udaipur – 313001
208 Nahush Krushi Yantriki Seva Ph: 020-256271769
986/C, Shukrawar Peth
In front of Saras Garden, Near Mahalaxmi
209 Nakoda Agro Bhadesar Chittor Gadh Mob: 9829589182

210 Nataraj Engg., Mob: 9437045567

A-1431, Industrial Estate, Cuttack-10
211 National Agro Industries 0161-2222041, 5087853
Link Road, Industrial Area A, Fax-0161-2220299
Ludhiana-141003. Mob: 9815043000, 9815064000
Email [email protected]
212 New Laxmi Engineering Works Ph: 0291-2435908
Pal Road, Jodhpur
213 New Punjab Mech. Works Main Road, Ph: 01632-230124, 304124
Talwandi Bhai, Distt. Ferozepur – 142 050 Mob: 9814767842
Email: [email protected]
214 New Saggu Agriculture industries, Sadul Shahar, Ph: 01503-222359
Hanuman, Gadh

217
215 New Vishavkarma Agriculture Works. Ph. 01667-230066 M: 94161-06524
G.T. Road, Fathabad
216 NIPHA Tel: 91 33 4021 4300, 2287 2511, 2287 4447
48 Ganga Jamuna, 28/1 Shakespeare Fax: 91 33 2287 5104
Srani, Email: [email protected]
Kolkata-700017 Website: www.niphaindia.com

217 North India Group of Industries, Sangrur Road, Ph: 01676-242167, 242767
Dirba – 148 035Dist. Sangrur Fax: 01676-242667
Email: [email protected]
218 Nua Seeds Private Limited
Dhillon House Aryasamaj Chowk, Dulladi
Gate, Nabha
Patiala, Punjab - 147201, India

219 Nursery Road, Mahadev Nagar, P.O. Phone: 91-2634-283549

Devsar,
Billimora - 396380, Gujarat, India
220 Om Engineering Works (India) Pvt. Ltd., Ph: 0651-22301373 & 2290224Fax:
Ancillary Industrial Area, P.O. Hatia, 0651 &2200438
Ranchi - 834003
221 Omax Energy Pvt. Ltd. Mob: 9427163709
Rajkot
222 Padgilwar Agro Industries192, Wardhman Ph: 0712-2760139, 2763478
Nagar, Nagpur - 08 Fax: 0712-2763478
Mob: 9823012421
Email: [email protected]
223 Padgilwar Company, Mangaldas Market, Akola Ph: 0724-2433660, 6518616
– 444 001 Fax: 0724-2433660
Mob: 9371009913
Email: [email protected]
224 Padgilwar Electrical Industries Mangaldas Ph: 0724-223660
Market, Akola
225 Padsons Industries (P) Ltd.H-28/2 Phase – III, Ph: 0724-2258099, 6518634, 9371009904
MIDC, Akola – 444 104 Fax: 0724-2259356
Email: [email protected],
[email protected]
226 Panesar Agril. Industries Opp. Power House, Ph: 01679-284084, 284484
Bathinda Road, Handiaya, Distt. Sangrur - 148 Fax: 01679-284984
101 Email: [email protected]
[email protected]
227 Paragati Agro Engineering Cotton Market Road Mob: 9448337975
Near Veerashavar Library Gadag – 582 101
228 Parambeer Engineers & ManufacturersC-71 & Ph: 01636-224075, 222075, 229075
72, Focal Point Moga – 142 001 Mob: 98140-69075
Email: baldev_moga @satyamnet.in
229 Patil Traders S.V. Patil Complex, India Road Ph: 08352-224220
Bijapur – 586 101 Mob: 9448149848
230 Popular Agril Implements Ph: 0230-2469699
F-26/1, Near Parmar Steel
MIDC, Shroli, Kolhapur – 416 122

218
231 Popular Steel Works & Agricultural Ph: 0231-2657424, 2657376
Implements Pvt. Ltd., Shivaji Udyam Fax: 0231-2657988
Nagar Email: [email protected]
Kolhapur – 416 008 Web: www.psw.in
232 Post Box. No.7602, Aspee House,
B.J. Patel Road, Malad West, Mumbai - 400
064, (Maharashtra), India
234 Pragati Engineering Ph: 0671-2345066, 2347435
11/2, Industrial Estate, Madhupatna Cuttack –
753 010
235 Prakash Agro Industries, Ph: 0755-2735024, 2731524
311-A, Categorized Market, Main Road, Mob: 9827053683
Bhopal – 462 001
236 Prakash Metal Craft Industries, Ph: 0761-5016029, 2610918, 5016029
45, F/F, G.D. Complex, Near Krishna Talkies, Email: [email protected]
Jabalpur
237 Prakash Trolley Works Pali Road, Bar Pali Ph: 02937-284217

238 Prem Agriculture Industries II phase H/28 Ph: 02982-224272

Industrial Area Sinadari Road, Badamer
239 Premier Magnetos Ph: 03222-279171
P.O.: Hijli Cooperative, Prembazar, Kharagpur – Fax: 03222-279171
721 306 Mob: 9434205116
Email: [email protected]
[email protected]
240 Professor and Head Ph : 0422-5511257;
Department of Farm Machinery FAX : 0422-2456478
Agricultural Engineering College and E-mail: [email protected]
Research Institute
Tamil Nadu Agricultural University
Coimbatore - 641 003.

241 Puja Laghu Udyog Ph: 07272-255669

Makshi Road, Jamuna Nagar Dewas
242 Punjab Engineering Works Ph: 01632-230130, 230530, 231430
G T Road, Near Power House, Talwandi Bhai- Mob: 9417468328
142050
243 Punjab Engineers Ph: 0121-2511627, 6541627
Dashmesh Nagar, Baghpat Road, Meerut – 250 Fax: 0121-2513756
002 Mob: 9837340086
Email: [email protected]
244 Punjab Krishi Udyog,Bus Stand Road,
Damoh
245 Quality Engineering Works, Barnagar Road, Ph: 07367-227004
Baledi, Ujjain
246 R J Sekar Industries Kuppayeevalasu Porulur Ph: 04553-260749
(PO) Oddanchatram (Tk) Mob: 9787242452
Dindigul – 624 616
247 R K Agro Industries Ph.: 0285-2661493
GIDC-1, Plot No. C/2-89 Mob: 9825210411, 9879506420
Near Maruti Show Room, Junagadh Email: [email protected]

219
248 Raja industries, Ph: 0425 – 222628, 222629, 224812
No 49/10-B(30)
Dharapuram Road,Udumalpet- 642126
249 Rajiv Farm Machinery,158, Automobile Mob: 9416136498, 9416165992
Market, Hisar – 125 001
250 Rakesh Agriculture Industries Bus Stand, Ph: 0145-2775331
Pisangana, Ajmer
251 Rama Machineries Mob: 9822738939
Below Saraswat Bank
Agrasen Chowk, Gandhi Bag Nagpur – 440 002
252 Ratnagiri Impex Pvt. Ltd.# 1/1 G, 7th Cross, Ph: 080-26753601, 26753602, 32710246,
New Guddadahalli 32710162
Mysore Road Fax: 080-26751658
Bangalore – 560 026 Email: [email protected]
253 RATNAM ENGINEERS, E-mail: [email protected],
4-6-11, Opp. R.J.Y. Railway Station, [email protected]
Rajahmundry – 533 101 (A.P.)

254 Redlands Ashlyn Motors Ph: 0487-2320893, 3207252

Redlands House, Karikkath Lane, Thrissure – Fax: 0487-2320951
680 001 Mob: 9446568563
Email: [email protected]
255 Redlands Ashlyn Motors Pic Malumachampatty Mob: 9446568563, 9387103530
Coimbatore – 641 021 Email: [email protected]
Website: www.redlandsmotors.com
256 Rekha Agriplas Ltd. Ph: 0866-2433559, 6612559
30-22-77, Kanakadurga talkies Road, Fax: 0866-6613559
Seetharamapuram Email: [email protected]
Vijayawada – 2 (AP)
257 Riteset Industries Gudivada, Krishna District Ph: 0864-2439976

258 Rohan Agro Indutries Nehru Gunj, Ph: 08472-268128

Gulbarga – 585 104 Fax: 08472-277249
Mob: 9448457521
Email: [email protected]
259 S S Industries Ph: 0836-2310650, 2310398
Plot No. 60/A, 1st Phase, Fax: 0836-2310348
Tarihal Industrial Area, Tarihal, Hubli – 580 026 Mob: 9945524493, 9945059444
Email: [email protected]
260 Sadhu Agro Industries Mob: 9896179002, 9416106150, 9416622749
G. T. Road, Fatheabad
261 Sadrudin and Badarudin Luhar,
Luhar Mohalla, Jalarapatan, Jhalawad
262 Saggu Agriculture Equipment Mathura Road, Ph: 05644-260360
Kumher Gate Bharatpur
263 Sai Sonalika Tractors Mob: 9422220438
Near Padmavati Petrol Pump
Nagar-Manmad Road, Savedi
Ahmednagar – 414 003

220
264 Sally Gao Tel: 86-371-87513089-
Fax: 86-371-65863109
Cell phone: 0086-15238020676
Ali. ID: cn200432054
265 Samarth Agro Inputs829 Shrirampur, MIDC Mob: 9822655006

266 Sanchi Agro Industries Ph: 07592-250602, 236062

1 Industrial Area, Vidisha
267 Sanjay Industries, Ph: 07581-240679, 240689
Khimlasha Road, Khurai, Sagar
268 Sapthagiri Enterprises Ph: 08394-222524
3/1, P.V.S.B. Charities Building Mob: 9880783674, 9880984340
College Toad, Hospet – 583 201
269 Sarvesh Agro Enterprises Bhinder, Udaipur Ph: 0294-224051

270 Sehmbi Agro Industries Nakodar Road Ph: 01821-271158

Malsian, Jalandhar
271 Sehra Motors & Tractor Engg. Works, Nehru Ph: 0181-2257691, 2253512
Garden Road, Jalandhar – 144 001
272 SEPTU (INDIA) PRIVATE LIMITED Phone:91-124-2321497
"Septu House" 12/7, P.O. Box No. 4, Fax:91-124-2322997
Urban Estate, Gurgaon - 122001, Haryana,
India
273 Sh. Babu Lal Vikas Trolley Works, Residency Ph: 0291-2770055
Road, Jodhpur
274 Sh. Chabhuja Agro Ph: 01590-220950
Plot No. G I - A RIICO Industrial Area, Medata
City, Nagpur
275 Sh. Sujaram Trolley Works M. Post. Kuchera, Ph: 01584-280051
Nagpur
276 Shah Machinery Stores Nehru Gunj Ph: 08472-268128
Gulbarga – 585 104 Fax: 08472-277249
Mob: 9448457521
Email: [email protected]
277 Shandong Refine Fruit & Vegetable Machinery Phone -86-533-7986833
Technology Co., Ltd. Dian Zi Industrial Park, Fax -86-533-7986822
Bo Xing County. Bin Zhou. Shandong, China Web -http://www.sdruifan.com
(Mainland)- 256508
278 Sharma Engineering, Ph: 01437-225335
Toda Road, Malpura, Tonk
279 Shivraj S Khandagale
Greaves Power Tiller Ph: 02422-243609
A/p Belapur Bk., Tal. Shrirampur Mob: 9326611242, 9890998961
Dist. Ahmednagar
280 Shiv-Shakti Laghu Udyog, Agar Road Naka, Ph: 07532-231409
Ujjain
281 Shree Guru Nanak Mechanical Works, Bhusa Ph: 07581-240714, 240715
Mandi, Khurai, Sagar
282 Shree Sai Agro Industries Ph: 0836-2310650, 2310398
Plot No. 61, 1st Phase, Fax: 0836-2310348

221
 Tarihal Industrial Area, Tarihal, Hubli – 580 026 Mob: 9945524493, 9945059444
Email: [email protected]
283 Shree Sai Implement Industries Sai Chambers Ph: 0836-2331228, 2332633, 4255771
Gokul Road, Hubli – 580 030 Fax: 0836-2333287
Email: [email protected]
284 Shree Sai Industries Ph: 0836-2333085, 4152175
Opp. Vijayalaxmi TVS Show Room, Near Shiva Mob: 9945702547, 9448493085, 9448567649
Steel, Gokul Road, Hubli – 580 030
285 Shri Annapoorna Agro Industries, 432, Trichy Ph: 0422-2316667
Road, Coimbatore – 641 005 (TN) Mb: 09443331670
Email: [email protected]

286 Shri Kanhaiyalal Ramratan Krishi Yantra Laghu Ph: 01423-224485, 224685
Udyog Mob: 9829175398, 9414594193, 9829195072
NH 11, Jaipur Sikar Road Bus Stand Rampura Email: [email protected]
Dabri
Jaipur - 303704
287 Shri Mouneshwar General Engineering Ph: 08444-200300, 200546
Works Main Road, Hunasagi, Dist. Gulabarga Mob: 9449661970, 9448439951
288 Shri Nawab Krishi Yantra Industries RTO Office, Ph: 0761-2394682
Jabalpur
289 Shri Sai Farm Equipments Ph: 0836-2310650, 2310398
Plot No. 60, 1st Phase, Fax: 0836-2310348
Tarihal Industrial Area, Tarihal, Hubli – 580 026 Mob: 9945524493, 9945059444
Email: [email protected]
290 Shri Sainath Engineering Works, Traffic Island, Ph: 0836-2355070, 4255774
Neeligin Road Hubli-580 029 Fax: 0836-2333287
Email: [email protected]
291 Shri Samarath Agro Inputs Mob: 9822655006, 9763001006
Belapur Khurd, Taluka Shrirampur Dist.
Ahmednagar
292 Shri Thakurji Engg. Works, Pvt, Ltd. Kachhwa, Ph: 05442-82225
Mirzapur
293 Shri Vinayaka Agro Tech Ph: 080-28524455
B-38 NGEF Ancillary Industrial Estate,
Mahadevepora
Post Bangalore – 560 048
294 Shri. I.M. Sreepada E-mail: [email protected]
Greaves Cotton Limited,
P.B. 892, Old Mahabalipuram Road,
Thoraipakkam, Chennai – 600 096
295 Shri. James A. Fernandes Manager E-mail: [email protected]
Souza Sifang Agro. Engineering Pvt. Ltd,
91, Iconet Business Centre, Temple Road,
Malleshwaram Banglore
296 Shri. Annapoorna Agro Industries, Ph: 0422-2316667, 3238111
29, Thiru Nagar, Dhanalakshmipuram Singanallur, Mob: 9443331670
Coimbatore – 641 005 Email: [email protected]
297 Shri. Kanhaiyalal Ramratan Krishi Yantra Laghu Ph: 01423-224485, 224685
Udyog, Mob: 9829175398, 9414594193, 9829195072

222
 NH 11, Jaipur Sikar Road Bus Stand Rampura Email: [email protected]
Dabri
Jaipur – 303704
298 Shri Mouneshwar General Engineering Works, Ph: 08444-200300, 200546
Main Road, Hunasagi, Dist. Gulabarga Mob: 9449661970, 9448439951
299 Shri. Sai Farm Equipments Ph: 0836-2310650, 2310398
Plot No. 60, 1st Phase, Fax: 0836-2310348
Tarihal Industrial Area, Tarihal, Mob: 9945524493, 9945059444
Hubli – 580 026 Email: [email protected]
300 Shri Samarath Agro Inputs Mob: 9822655006, 9763001006
Belapur Khurd, Taluka Shrirampur Dist.
Ahmednagar
301 Shri Shivanand Enterprises Ph: 0836-2353878, 4257878
Stall # 4, Laxmi Complex, Neeligin Road, Hubli- Mob: 9448236508, 9448564535
580 029
302 Shri Vinayaka Agro Tech Ph: 080-28524455
B-38 NGEF Ancillary Industrial Estate,
Mahadevepora Post
Bangalore – 560 048
303 Shyam Industries, Tonk Ph: 01432-243228, 243228

304 Singhvi Enterprises Ph: 0294-2418908

Shree Niketan ke Samne, Ashok Nagar Main
Road,Udaipur-313001
305 Sirsa Industries Ph: 01823-224116
D-16, Focal Point Nawanshahr Doaba
306 Smita Industries Ph: 020-27455372
191/C, Chinchwad 33
Near Hindustan Lever Co.Near Chinchwad
Station, Pune
307 Sohan Engineering Works E-36 Industrial Area Mob: 9414177977
Road No. 2, Kota
308 Soharr India Agro Division (Regd.), E-mail: [email protected]
17/B, Kallur Mandli, Industrial Estate,
Shivamogga, KARNATAKA.

309 Solanki Loha Udyog Kendra Station Road, Ph: 0731-2856097

Rau, Indore
310 Sonalika Agro Industries Corporation, Ph.: 01882-252625, 250376, 205794
6, Industrial Estate, Jalandhar Road, Opp. ITI, Fax: 01882-252756
Hoshiarpur – 146 001 Email: [email protected]
311 SORMAC B.V.Huiskensstraat T: +31 (0)77 351 84 44
68 5916 PN Venlothe Netherlands, F: +31 (0)77 320 48 01
P.O. Box 419 E: [email protected]
5900 AK Venlo
312 Southern Agro Engine Pvt. Ltd, E-mail: [email protected]
#24A III Phase Industrial Estate,
Guindy, Chennai – 600 032
313 Sree Balaji Agro Industries Mob: 9448566987, 9844441009
# 114, Urekunte Compound, Opp. Walwalkar
(HP) Petrol Pump, P.B. Road, Davangere – 577

223
 002
314 Sree Engineering Co. Peenya Industrial
Area Bangalore – 560 030
315 Sri Dayanand Engineering Works, No.768, Old Ph: 0823-224158
MC Road, (Holalu Circle), Mandya-571 401 Fax: 0823-224248
316 Sri Padma Agro Industries, Ph: 0836-832848
Opp : APMC Road, Haveri
317 Sri Renuka Udyog Ph: 0836-2335228, 5562134
M I G 1/20, Near K E C Gandhi Nagar, Mob: 9448103583, 9243288564
Gokul Road Hubli – 580 030
318 Sri Sivasakthi Vinayaga Trailers175/2, Anna Ph: 04256 -261112
salai near Fire station, Thavittupalayam
Anthiyur- 638 501, Erode Mob: 98427 66112, 98420 86540
Email: [email protected]
319 Sri Valasumani Hi-tech Engineering Company Ph: 04204-240478, 240578
Sivagiri- 638109, Erode district Fax: 04204-240478
Mob: 9865888178
320 Sri Vinayaka Industries, 12/7, Nehru Weedhi,
Avinashi Road, Peelamedu, Coimbatore- 641 004
321 Sri. A. Bhaskar Reddy, Mob: 9177118818/9390032809
Prakash Agro Engineers, Ph: 040-24361791,
Proddutar Cuddaph Dist. (AP) Email: [email protected]
322 Srinivas General Engineering Works, Arekurhatti, Ph: 08380-244253
Tq: Navalagunda, District : Dharwad
323 Standard Agriculture Works (Regd.), Standard Ph: 01679-232530
Chowk, Handiaya – 148 101, Barnala Distt. Mob: 93175-104030
Sangrur Fax: 01679-239061
324 Star Mechanical WorksIn front of Halali Colony,
Ph: 07592-250045
Sagar Road, Vidisha
Mob: 9827260038
325 Steel Man Industry,
Near Gayitri Mandir Jhumri Tillaya,
Koderma.
326 Stitch Well Qualitex Pvt. Ltd., G-58, Sector 6, Ph: 0120-2422496, 4222052
Noida - 201 301 Fax: 0120-2422654
Mob: 9811613773
Email: [email protected]
327 Subash Iron and Agricultural Industries, Ph: 06670-222115(O), 223472 (R)
Industrial Estate, IDCO, Plot No. 8, P.O. Mob: 9437070643, 9437576643
Kesinga, Email: [email protected]
Dist. Kalahandi – 766 012
328 Sucha Singh & Bros, Chandigarh Road, Samarala Ph.: 01628-262361
– 141 114 Dist. Ludhiana Mob: 9815488361
Email: [email protected]
329 Sujatha Agro Engineers and Traders, Sujatha Ph: 0422 – 553925, 555793
Agro Equipments Pvt Ltd162, Venkatasamy
Road East
R.S.Puram, Coimbator – 641 002
330 Sunfield Agro Industries Ph: 0181-6451670
GT Road, Bye Pass, Jalandhar Mob: 98149-73573
331 Sunlight Foundary, Ph: 05248-222966, 222312
35/5, Gokhale Marg, Lucknow Mob: 9839123230

224
332 Sunmoon Sleeves Pvt. Ltd.,
Venkatesh Nagar, Jalna Road,
AURANGABAD – 431 001
333 Super New Punjab Engg. Ph: 01632-231324, 556324
WorksMain Road, Mob: 9814918624, 9417951334
TalwandiBhai – 142 050
334 Sushil Agro Services, Jaipur Vansthali marg Ph: 0141-2374687
Jaipur
335 SV Rangaswamy & Co. Pvt. Ltd., Ph: 080-22222301
No.2, III Cross, Kalasipalyam, New Extension, Fax : 080-22224497
POB 6539, Bangalore - 2
336 Swamy Agro Industries N-7, A-4/1, CIDCO Ph: 0240-2480135
Aurangabad Mob: 9873545241
337 Swastik Agro Industries D-156, Street 10 MIDC, Ph: 02562-239788
Dhule Mob: 9423228877
338 Swathi Industries,
Marudhanmalai road,
New thillai Nagar, PN Pudur, Coimbatore – 641
041
339 Swathi Industries,
Marudhanmalai road,
New thillai Nagar, PN Pudur, Coimbatore – 641
041
340 Taha Engineering Works, Shyampur Road,
Ph: 07562-222433, 504509
Sehore
341 TATA Steel Limited 43, Jawaharlal Nehru
Road
Kolkata- 700071
342 Texmco Ltd., Belgharia, E-mail: [email protected]
KOLKATA – 700 056
343 Tirth Agro Technology Pvt. Limited Phone: +91-281-2377204, 2386047,
Near hotel Krishna park, NH-8B Fax: +91-281_2380852
Gondal Road, Vavadi, Rajkot-360004, E-mail: [email protected],
Gujrat, India website: www.shaktimanagro.com

344 Trimurti Agro IndustriesB-31/32, MIDC Ph: 0241-2277757

Ahmednagar – 414 111
345 Umrao Agro Industries Bindki, Fatehpur Ph: 05181- 2257696

346 Universal Engg. Traders,

2, Ganesh Chandra Avenue,
Commerce House, 3rd Floor,
Room No. 6 A, KOLKATA
347 Universal Sales Corporation Mob: 98280 14218
D - 5 A Vandana Apartments, Meera Marg,
Banipark, Jaipur
348 Usha International Ltd. Plot No. 3, Industrial Ph: 0124-4583100
Area Sector 32 Fax: 0124-4583200
Gurgaon – 122 001 Email: [email protected]
349 V.S.T. Tillers Tractors Ltd. Ph.: 080-28510805/06/07, 28510275, 28510318
P.B. No. 4801, Mahadevapura Fax: 080-28510221

225
 P.O., Whitefield Road, Website: www.vsttillers.com
Bangalore – 560 048
350 Valampuri Industries, Ph: 0422-4341273
2, Thiyagi Kumaran Street Mob: 9994941243
(Behind Simpson Company), P.N. Pudur,
Coimbatore – 641 041
351 Valarpirai Agencies Near uzhavarSanthai36 Mob: 9443825812, 9003781177
Kottai Road
Namakkal – 637 001
352 Varsha Associates Ph: 08194-651721
Mruthyunjaya Compound V. P. Extension Fax: 08194-226648
Chitradurga – 577 501 Mob: 9448396261
Email: [email protected]
353 Varushapriya Agrotech Pvt. Ltd. Agro Ph: 080-25250397
Machinery Division 195, 7th Cross, 1st Stage, Fax: 080-25252780
Indiranagar, Email: [email protected]
Bangalore – 560 038
354 Vasundhara Krishi Yantra Udyog,
Ph: 0755-2733334
Nishatpura East, Berasia Road, Bhopal.
355 Vicon Ltd.
35/5 Langford Road
Bangalore – 560 025
356 Vigneswara Altek Engineers Ph.: 0422-3205090, 2666953
Vigneshwara Building Mob: 9363375756
4/16, Rathinagiri Road, Vetri Murugan Nagar,
Vilankuruchi,
Coimbatore – 641 035
357 Vijay Engg. & Machinery Co.1420-C Ward, Ph: 0231-2641877, 2642515
LaxmiPuri Kolhapur- 416 002 Fax: 0231-2640420
Email: [email protected]
358 Vijay Foundry andEngineering Works, Station
Road, Khurai, Sagar Ph: 07581-240759, 240859
359 Vijaya Shree Agencies and Pragathi Enterprises,
40, IV Main, NT Per, Bangalore-560 002 Ph: 080-26700063
Fax: 080-26702923
360 Vinay Engineering Works,
Ph: 07581-240966, 240567
Bhagat Singh Road, Khurai, Sagar
361 Vishal Industries Mob: 9740555557, 9845819909, 9945713192
Urekondi Compound, Opp. Walwalkar (HP)
Petrol Pump, P.B. Road, Davangere – 577 002
362 Vishvakarma Engineering Works, Arjia, Ph: 01482-264903
Bhilawara
363 Vishwakarma Agril. Works. G.T. Road,
Daryiapur,
Distt. Fathabad
364 Vishwakarma Industries Plot No. 5, Road No. Ph: 040-24361482
6Industries Estate, Kattedan
365 Vishwkarma Agri. Engg Works, Hoshiarpur Ph: 0181-2700326
Road, VPO – Jandusingha, Dist. Jalandhar Mob: 98156-1867
366 Vishwkarma Agri. Works Ph: 01679-288607, 288667
Near Dhilwal Bhaba, Barnala to Sehna Bhador Mob: 98156-1867

226
 Road, Pakho Kanchian, Distt. Barnala
367 Viswakarma Engineering Company, Ph: 040-24361719
Plot No. 138, Road No. 26, Industries Estate,
Kattedan, Hyderabad – 500 077
368 VST Tillers Tractors Limited
P. B. No. 4801, Whitefield Road,
Bengaluru,
Karnataka, India - 560 048
369 Walia Steel Furniture and Agril. Implements Ind.
Kaned, Tech. Sundernagar, Distt. Mandi
370 Yugavatar Mehar Baba Agri Machinery's Ph: 0724-2258183, 2459261
Office & Works: W 37 A & W 38A, Phase III, Fax: 0724-2259303
MIDC
Akola – 444 104
371 Zamidara Agro Industries Nalagarh

227