Scribd
Upload
35 views2 pages

Eumulgin_B_1_PD

The document provides the product specification for Eumulgin® B 1, including its INCI name, physical form, and quality control data with specific test properties and methods. It outlines storage information, including shelf life and conditions, and notes that the product is intended for use as a cosmetic ingredient. Additionally, it states that the seller makes no warranties regarding the product's quality or fitness for a particular purpose.

Uploaded by

Jonathan David Yepes Yépez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
35 views2 pages

Eumulgin_B_1_PD

The document provides the product specification for Eumulgin® B 1, including its INCI name, physical form, and quality control data with specific test properties and methods. It outlines storage information, including shelf life and conditions, and notes that the product is intended for use as a cosmetic ingredient. Additionally, it states that the seller makes no warranties regarding the product's quality or fitness for a particular purpose.

Uploaded by

Jonathan David Yepes Yépez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Product specification

Valid since 06.07.2015


Eumulgin® B 1 Revision 3.0

PRD 30527935 Page 1 of 2

® = registered trademark of BASF in many countries ™ = Trademark of BASF Care Chemicals

Characteristic values
The specifications stated in the paragraphs 'Quality control data' and 'Additional product descriptive data' finally
and conclusively describe the properties of the product.

INCI name: Ceteareth-12


Physical form: White, wax-like mass with a mild odor

Quality control data


(Data which is used for quality release and is certified for each batch.)

Test property Specification Test method


Appearance at room temperature Corresponds to the standard
Odor at room temperature Corresponds to the standard
Water max. 1.00 % ISO 4317
Hydroxyl value 70.0 - 75.0 mg KOH/g ISO 4326
Solidification point/range 34.0 - 37.0 °C DIN ISO 3841
Cloud point 90.0 - 97.0 °C DIN EN 1890
pH value (1 %) 6.0 - 7.5 ISO 4316

Additional product descriptive data


(Data which is proven statistically but not determined regularly.)

Test property Specification Test method


Ethylene oxide max. 1.0 ppm Internal method 92001402
Product specification
Valid since 06.07.2015
Eumulgin® B 1 Revision 3.0

PRD 30527935 Page 2 of 2

® = registered trademark of BASF in many countries ™ = Trademark of BASF Care Chemicals

Storage information

Shelf life
24 months

Storage temperature
< + 30 °C

Storage conditions
In original sealed containers and protected from moisture.

Additional information
Depending on the temperature, the pH value may decrease during storage. However, the product quality is
not negatively influenced above a pH value of 4.0. For a qualified sampling (e.g. for incoming goods control)
it is required to melt and homogenize an whole packaging, because the material tends to separate during
solidification depending on C-chain-length.

Intended for use as cosmetic ingredient

The aforementioned data shall constitute the agreed contractual quality of the product at the
time of passing of the risk. The data are controlled at regular intervals as part of our quality
assurance program.
SELLER MAKES NO WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, BY
FACT OR LAW, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE.
This is a computer generated document. It is valid without signature.

You might also like