SUDFLOC-3170-SDS-Ver2
SUDFLOC-3170-SDS-Ver2
1.2. Relevant identified uses of the substance or mixture and uses advised against
1.2.1. Relevant identified uses
Use of the substance/mixture : Potable Water Coagulation :
Maximum User Limit is 70 mg/L
Use of the substance/mixture : Chemical intermediate
Water treatment
Waste water treatment
GHS07
Signal word (CLP) : Warning
Hazard statements (CLP) : H319 - Causes serious eye irritation.
Precautionary statements (CLP) : P264 - Wash hands, forearms and face thoroughly after handling.
P280 - Wear goggles, gloves, clothing and respiratory protection
P337+P313 - If eye irritation persists: Get medical advice/attention.
3.2. Mixtures
Appearance : Liquid.
Molecular mass : 133.34 g/mol
Colour : Clear to pale yellow.
Odour : Mild odour.
Odour threshold : No data available
pH : 2–4
Relative evaporation rate (butylacetate=1) : No data available
Melting point : Not applicable
Freezing point : < 0 °C
Boiling point : 75 – 100 °C
Flash point : > 100 °C
Auto-ignition temperature : No data available
Decomposition temperature : No data available
Flammability : Not applicable
Vapour pressure : No data available
Relative vapour density at 20°C : No data available
Relative density : (20 °C)
Density : 1.15 (≥ 1.18) kg/l (20 °C)
Solubility : Miscible with water. Soluble in water.
Water: > 1000 g/l (20 °C)
Partition coefficient n-octanol/water (Log Pow) : No data available
Viscosity, kinematic : No data available
Viscosity, dynamic : No data available
Explosive properties : No data available
Oxidising properties : No data available
Explosive limits : No data available
9.2. Other information
Other properties : Substance has acid reaction.
IMDG
Transport hazard class(es) (IMDG) : Not applicable
IATA
Transport hazard class(es) (IATA) : Not applicable
- Overland transport
Not applicable
- Transport by sea
Not applicable
- Air transport
Not applicable
14.7. Transport in bulk according to Annex II of Marpol and the IBC Code
Not applicable
“DISCLAIMER: The information in this Safety Data Sheet (SDS) is believed to be correct as of the date issued. IMPROCHEM MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING,
BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF TRADE. User is
responsible for determining whether ImproChem’s product is fit for a particular purpose and suitable for user's method of use or application. Given the variety of factors that can affect the use and
application of the ImproChem product, some of which are uniquely within the user's knowledge and control, it is essential that the user evaluate ImproChem product to determine whether it is fit for
a particular purpose and suitable for user's method of use or application. ImproChem provides information in electronic form as a service to its customers. Due to the remote possibility that
electronic transfer may have resulted in errors, omissions or alterations in this information, ImproChem makes no representations as to its completeness or accuracy. In addition, information
obtained from a database may not be as current as the information in the SDS available directly from ImproChem.”