TM

CAPTURE CAM

BEONBK / BEONWH
User Manual
Important, retain for future reference:
Read carefully
 QUICK INSTALLATION GUIDE
Before you begin the installation, please gather these items.

1 2 3 4

1. Mounting the Camera

Clip Mount: 2
MicroSD Card
(Factory-Installed)
1

2
Windshield Mount:

3
Recommended
mounting position

2
4
1

2. Connecting to Power

3
 INTRODUCTION
Please carefully review all installation instructions before installing the product.
Improper installation may void the manufacturer’s warranty. These instructions are
not applicable to all vehicle types and are provided as guidelines to aid in product
installation.
If you require assistance with camera installation, please feel free to either
consult an experienced technician or reach out to YADA customer support at
1.866.294.9244.
BEFORE using the camera, please read the safety information in this manual,
and always follow the guidelines outlined in it while using the product.
Please make sure you’ve read and understood local laws and regulations regarding
cameras in vehicles, as these laws can vary by state.

PRODUCT SPECIFICATIONS
Display: 1.47” IPS
Lens (View Angle): 110°
Video Resolution: FHD 1080P (1920x1080) / 30 FPS
Frequency: 2.4GHz
Memory Card: MicroSD (up to 256GB)
Audio Recording: Yes (can be turned on/off)
Built-in Speaker: Yes
Operating Temperature: 14°F~140°F (-10°C~60°C)
Operating Voltage: DC 12/24V / DC 5V (USB-C)
Battery: Built-in 380 mAh Li-ion battery
Run-Time: WiFi ON – up to 35 mins
WiFi OFF – up to 45 mins
4 Maximum Signal Range: Up to 10ft / 3m
PACKAGE CONTENTS
1. 1 x YADA BEON™
2. 1 x Back Clip Bracket
3. 1 x 3M VHB™ Windshield Mount with 12/24V Power Adapter
4. 1 x Adhesive Film
5. 1 x 16GB MicroSD Card (Factory-installed, replaceable)
6. 1 x Instruction Manual

1 2 3

4 5 6

16GB

U1

5
 PRODUCT OVERVIEW
LED Indicator
Power Input
Function Button

Capture/Dash
Mode Switch

Display Screen

Camera Lens

Speaker

Function Buttons
MicroSD Card Slot
6 (MicroSD Card Factory-Installed)
CONTROLLING THE CAMERA

- Menu / Navigation UP /
Audio Recording ON/OFF /
Rewind (click once)
- Delete (press & hold)

Top View

- Capture Camera Mode (toggle up)

- Dash Camera Mode (toggle down)

Side View

- Lock Video / Navigation DOWN /

Fast Forward (click once)
- Switch between Video / Camera Mode /
Return (press & hold)

- Record / Shutter / OK /
Next / Play / Pause (click once)
Bottom View - Power ON/OFF (press & hold)

7
 DIMENSIONS
1.0” / 25.4mm
1.9” / 48.26mm

1.2” /
30.48mm

INSTALLING THE CAMERA

Clip Mount:
1. Insert the camera into the back clip bracket and push it all the way
in until you hear a “click”.

MicroSD Card
(Factory-Installed)

8
2. Clip the camera onto your clothing, bag, or any suitable object. Make
sure it is secure and won’t easily detach during use.

NOTE: The camera is not designed for use in wet conditions, such as
rain or snow.

Windshield Mount:
1. Insert the camera into the
back clip bracket and push it
all the way in until you hear a
Release
button “click”. Attach the windshield
mount to the camera.

NOTE: To detach,
press the release
button on the mount.

9
 2. Mount the camera onto the windshield. You can power on the camera
and view the live screen to find the optimal mounting position.
- Apply the adhesive film onto
the cleaned windshield and
remove the protective film. Recommended
- Peel off the 3M VHB™ tape mounting position

backer from the windshield

mount and affix the camera to
the center of the adhesive film.

NOTE: Avoid installing the

product in a position that may
obstruct the driver’s line of sight.

3. Route the power cable through the headliner and pillars inside
your vehicle. Connect the power adapter to your vehicle’s 12/24V
DC outlet. To ensure it doesn’t obstruct the driver while driving, we
recommend passing it through the passenger side.

10
CONFIGURING THE MENU SETTINGS
Initial Setup
Set the date & time before using the camera. The date stamps that appear
on all future recordings will follow this setting. You may also sync the date
& time to your phone by connecting the camera to the YADA Drive APP.

Switching Modes
The camera features two modes: Capture Camera Mode and Dash Camera
Mode. To switch between modes, follow the steps below.

Switch to Capture Camera Mode : Switch to Dash Camera Mode :

Disconnect Connect
the adapter the adapter

Toggle Toggle
UP DOWN

11
 Capture Camera Mode
Capture Camera Mode lets you record on-the-go without needing to
connect the camera to a power source. In this mode, the camera runs on
its internal battery. Please ensure the camera is fully charged.
Apply configuration and settings to the camera using the 3 function
buttons. Refer to the section below for the functions of each button
under Capture Camera Mode.
➊ Behaviors
Button
Click Once Press & Hold
Audio Recording
➊ ON/OFF -
*during recording

➋ Record / Shutter Power ON/OFF

Switch between
Video/Camera
➋ ➌ ➌ Lock Video Mode
*when recording
stopped

1. Video Mode
• Recording must be started manually. To do so, click ➋ .
• By default, videos are recorded in 30-minute segments and saved onto
the MicroSD card.
• Loop recording is not supported in Capture Camera Mode. To ensure
sufficient storage space for continued recording, regularly transfer your
files to another storage device.
12 • Click ➊ while the camera is recording to turn audio recording on/off.
• Click ➌ to start an emergency video recording. The footage will be
stored in the “Event” folder.
• Press and hold ➌ when recording stopped to switch to camera mode.

2. Camera Mode
• Click ➋ to take a photo.
• Press and hold ➌ to switch back to video mode.

Dash Camera Mode

Dash Camera Mode is designed for use with the provided power adapter.
If the adapter is not connected or an alternative one is used, the camera
will automatically switch to Capture Camera Mode, regardless of the
mode selected on the switch.
Refer to the section below for the functions of each button under Dash
Camera Mode.
➊ Behaviors
Button
Click Once Press & Hold
Audio Recording
➊ ON/OFF -
*during recording

➋ Record / Shutter Power ON/OFF

Switch between
Video/Camera
➋ ➌ ➌ Lock Video Mode
*when recording
stopped
13
 1. Video Mode
• The camera will begin recording automatically once it is powered on.
You may also click ➋ to start/stop recording manually.
• By default, videos are recorded in 1-minute segments and saved onto
the MicroSD card. When the memory reaches capacity, new videos will
overwrite the old ones.
• Click ➊ while the camera is recording to turn audio recording on/off.
• Click ➌ to start an emergency video recording. The footage will be
stored in the “Event” folder.
• Press and hold ➌ when recording stopped to switch to camera
mode.

2. Camera Mode
• Click ➋ to take a photo.
• Press and hold ➌ to switch back to video mode.

14
Gallery
Refer to the section below for the functions of each button under Gallery.

➊ Behaviors
Button
Click Once Press & Hold
Menu *when
recording stopped /
➊ Delete
Navigation UP /
Rewind
OK / Play /
➋ Power ON/OFF
Pause

➋ ➌ Navigation
➌ DOWN / Return
Fast Forward

• Click ➊ when recording stopped to open menu.

• Utilize ➊ or ➌ to navigate to “Gallery”, then click ➋ to enter.

15
 • The gallery organizes your files by type:
“Event” for G-Sensor or manually
triggered videos, “Dash Video” for
Dash Camera Mode recordings,
“Action Video” for Capture Camera
Mode recordings, and “Photo” for all
captured photos.
• Cycle through the folders, then click
➋ to enter.

Play Back and Manage Files

• Utilize ➊ or ➌ to browse through
the previews, then click ➋ to view
the file in full screen.
• In video playback, click ➋ to
pause or resume the video.
• Click ➌ to fast forward or ➊
to rewind the video at x 2, x 4 or x 8
speed.
• Press and hold ➌ to return to the
previews for next video.

16
Erase Files
• In previews, press and hold ➊ to
delete the selected file.
• Click ➌ and ➋ to confirm the
erase.
• Press and hold ➌ to return to
folder selection.

Settings
1. Video Setting
Feature Parameters Applicable Mode
Capture Dash
Resolution FHD (1920x1080) and HD (1280x720). ✔ ✔
Loop Record
(Dash Only)
1 Min, 3 Mins or 5 Mins. - ✔
Motion
Detection
ON or OFF. - ✔
Microphone ON or OFF. ✔ ✔
G-Sensor High, Medium, Low or OFF. - ✔
Plate Input your vehicle license plate number
Number here. When activated, your plate number - ✔
will be displayed on all recorded media files.
Frequency 50Hz or 60Hz. ✔ ✔ 17
 2. Camera Setting
Feature Parameters Applicable Mode
Capture Dash
Resolution 12M (4032x3024), 10M (3648x2736) or
8M (3264x2448). ✔ ✔
Burst Photo ON or OFF. ✔ ✔
Date Stamp ON or OFF. ✔ ✔
3. System Setting
Feature Parameters Applicable Mode
Capture Dash
WiFi ON or OFF. ✔ ✔
Screen Save 1 Min, 3 Mins, 5 Mins or OFF.
(While in screen save mode, a digital - ✔
clock will be displayed on the screen.)
Auto Power 1 Min, 5 Mins, 10 Mins or OFF.
Off (The camera will automatically power off ✔ -
after a selected period of inactivity.)
Beep Sound &
Boot Sound
ON or OFF. ✔ ✔
Date & Time Set the date and time. ✔ ✔
18
Format Select to erase all data stored on the
MicroSD card. ✔ ✔
Feature Parameters Applicable Mode
Capture Dash
Default
Setting
Reset settings to factory defaults. ✔ ✔
Date & Logo
Stamp
ON or OFF. ✔ ✔
Device Info Show current firmware version. ✔ ✔
Regulatory
Info
Show regulation related information. ✔ ✔

DOWNLOADING THE APP

YADA Drive The auto-sync feature in the YADA Drive APP allows you to
1) Synchronize the camera’s time with your phone’s time,
2) Manage the camera’s functions from your phone, and 3)
View and download recorded videos.
To access this feature, scan the QR code below or search for
“YADA Drive” on the APP Store or Google Play. Download and
install the APP.

Compatible with Compatible with

iPhone, iPad, Mac devices with
and iPod touch with Android™ 7.0 or
iOS 13 or higher. higher. 19
 SETTING UP THE APP
Auto-sync with the Camera
1. Open the camera’s menu and
navigate to “System Setting”.
2. Go to “WiFi” and turn it on.

Android Device
3. Navigate to the WiFi setting page on your device.
4. Connect to “YADA_BEON01_1080P_xxxxxx” with the default password
“12345678”.
5. Run the YADA Drive APP. Click “Allow” in the pop-up message when
prompted to allow the APP to access your location.
6. Select the “BEON™” category.

5
3
6

20
7. Select BEON™ and click “Set Up Device”.
8. Once connected, you will have the ability to view the live feed from the
camera through the APP.
NOTE: After the initial connection, the APP retains your camera’s network
information so that you can simply click “Connect” to rejoin next time.
8

7 8

iOS Device
(Follow Steps 1-2 from previous
instructions)
3. Please make sure Bluetooth,
Location Services and Local
Network Access are enabled on
your device. 5

4. Run the YADA Drive APP and

select the “BEON™” category. 4

5. Select BEON™ and click “Set Up

Device”. 21
 6. Click to go to APP permissions setting page.
7. Click “Settings” on the APP permissions setting page.
8. Scroll to the top and click to enter the WiFi setting page.
9. Connect to “YADA_BEON01_1080P_xxxxxx” with the default password
“12345678”.
10. Click “YADA Drive” to return to the APP.
11. Once connected, you will have the ability to view the live feed from the
camera through the APP.

6 8

10

9 11

22
Change WiFi Password
It is recommended to reset your WiFi password upon initial connection to
protect your data from unauthorized access.
Click in the APP to open menu and navigate to System Setting >
Change WiFi Password. Enter your preferred password (must be exactly
8 numeric characters), then click “OK”. Connect to your camera’s WiFi
network again with the revised password.

23
 ADDITIONAL FEATURES
Automatic ON / OFF
When the camera is connected to the vehicle’s power, it will power on and
start recording when the vehicle engine starts. When the engine is off, the
camera will stop recording and power off automatically.
Dash Cam / Capture Cam 2-in-1
The mode-switching feature allows smooth transitions between Capture
Camera Mode and Dash Camera Mode, offering the versatility to record
chosen moments during dynamic activities or everyday commutes.
Smart G-Sensor Recording
In Dash Camera Mode, if the G-Sensor detects a sudden impact, like a
collision, it automatically locks and saves the footage in the “Event” folder
to prevent important data from being overwritten by the loop recording
feature.
NOTE: The sensitivity of G-Sensor can be adjusted in the menu.

BATTERY LEVEL INDICATIONS

Please refer to the diagram below for battery level indications.
Fully charged Battery moderately low Battery low
Please charge Charging

NOTE: The built-in battery supports mobile recording in Capture Camera

Mode. However, when using Dash Camera Mode while driving, maintain
the camera’s connection to your vehicle’s power source. This ensures it
shuts down properly when the vehicle is turned off, avoiding excessive
24 use of the battery.
CHARGING THE CAMERA
USB-A to USB-C Charging Cable (not included)

1. Plug the USB-A end of the charging cable into a USB-A port on a
computer or wall adapter (not included).
2. Connect the USB-C end of the charging cable to the USB-C input port
on the camera.
3. Disconnect the camera when it is fully charged.

NOTES:
Fully charge the camera before initial use. To preserve the battery life and
performance, check the battery status regularly, charge when needed.
In order to reduce the risk of fire or electric shock, an adapter shall be
chosen that is suitable for the application and is certified as a Class 2 or
LPS power supply or power adapter.

25
 FAQS
1) Problem: The camera is unable to take pictures or record videos.
Solution: Please try formatting the MicroSD card (Menu – System .
Setting – Format).

2) Problem: Message showing “SD card error”.

Solution: Please try formatting the MicroSD card (Menu – System .
Setting – Format).

3) Problem: The image or video looks foggy.

Solution: Please 1) Make sure that you’ve removed the protective film .
cover on the camera lens, and 2) Try wiping the camera lens.

4) Problem: Dash Camera Mode is not working properly.

Solution: Please make sure that you’re using the power adapter
provided in this package. An alternative power adapter may
interfere with the proper functionality of this feature.

5) Question: How does the camera handle continuous recording?

Answer: In Capture Camera Mode, videos are recorded in uninterrupted
30-minute segments, while in Dash Camera Mode, shorter
segments of 1, 3, or 5 minutes are used for easier content
retrieval.

6) Question: Can I buy and use my own MicroSD memory card?

Answer: Yes, but please make sure that you purchase one that’s U1 .
rated with the max capacity of 256GB.

26
SAFETY INFORMATION
IMPORTANT SAFETY INSTRUCTIONS
1. SAVE THESE INSTRUCTIONS – This manual contains important
safety and operating instructions of the 12/24V cigarette lighter adapter
for Model BEON.
2. Before using the product, read all instructions and cautionary
markings.
3. Do not expose cigarette lighter adapter to rain, moisture, or snow.
4. Use of an attachment not recommended or sold by the product
manufacturer may result in a risk of fire, electric shock, or injury to
persons.
5. To reduce risk of damage to cigarette lighter connector and cord, pull
by cigarette lighter connector rather than cord when disconnecting
cigarette lighter adapter.
6. Make sure cord is carefully secured so that it will not be stepped on,
tripped over, or otherwise subjected to damage or stress.
7. Do not operate cigarette lighter adapter with damaged cord or
cigarette lighter connector – replace it immediately.
8. Do not operate cigarette lighter adapter if it has received a sharp
blow, been dropped, or otherwise damaged in any way; take it to a
qualified serviceperson.
9. Do not disassemble cigarette lighter adapter; take it to a qualified
serviceperson when service or repair is required. Incorrect reassembly
may result in a risk of electric shock or fire.
10. To reduce risk of electric shock, unplug cigarette lighter adapter
before attempting any maintenance or cleaning. Turning off controls
will not reduce this risk. 27
 WARNING: A failure to read and follow these warnings and instructions
may result in a serious accident, including damaged property or a serious
injury, including loss of life.
• Never depend on the BEON™ camera entirely when engaging in activities
such as driving or outdoor pursuits. The image on the screen is different
from actual conditions. Objects viewed in the BEON™ camera display
screen differ from actual distance because a wide-angle lens is used.
• Always check the surroundings carefully. For outdoor pursuits, maintain
awareness of your environment and be alert of potential hazards. For
vehicle use, inspect all areas around the vehicle visually using mirrors
before proceeding.
• The BEON™ camera is designed as an aid to the driver in detecting large
stationary objects to help avoid damaging the vehicle. However, you, the
driver, must use it safely and properly. Use of the BEON™ camera is not a
substitute for safe, proper and legal driving.
• The area displayed by the BEON™ camera is limited. The BEON™ camera
does not display objects that are out of the camera’s field of view. The
area displayed on the screen may vary according to vehicle orientation or
road conditions.
• Be sure to check the camera’s position and mounting angle before each use.
• Do not strike the BEON™ camera. It is a precision instrument. Otherwise,
it may malfunction or cause damage resulting in a fire or an electric shock.
• This product will only provide images of items that are within the field of
view of the BEON™ camera. Thus, it is imperative that the BEON™ camera
should be kept clean and unobstructed.
• Adhere to all applicable traffic laws and motor vehicle regulations
applicable to the device.
• Consult local laws and regulations for any restrictions on installation or use.
• Never allow children to play with the device. Small parts may be a choking
28 hazard.
• There is a plastic cover over the BEON™ camera. Do not scratch the cover
when cleaning dirt or snow from it.
• If the temperature changes rapidly, the system may not operate normally.
• When strong light directly enters a camera, objects may not be displayed
clearly.
• The screen may flicker under fluorescent light.
• The colors of objects on the BEON™ camera may differ from those of the
actual objects.
• Do not use alcohol or thinner to clean the camera. This will cause
discoloration. To clean the camera, wipe with a clean cloth dampened with
mild cleaner diluted with water and then wipe with a dry cloth.

Safety Around and Behind Other Vehicles

Using a BEON™ camera is not enough to completely overcome a vehicle’s
blind spot. Many preventable injuries and deaths occur in driveways or
parking lots when drivers do not see children, pets, or others near their
vehicles. Here are a few safety tips that will help you to avoid an accident:
• Walk completely around your vehicle before getting in. Check for kids,
toys, and pets before entering the vehicle and starting the engine.
• Know where children are. Have children stand in a place where they are in
full view.
• Be aware of young children. Young children are small and hard to see.
• Parents, caregivers and all adults need to be vigilant in supervising
children, especially when children are in the yard, driveway or parking lot
playing near parked cars.
• Roll down your window so you will be able to hear what is happening
outside your vehicle.
• Owners of SUVs, trucks, and vans need to take extra care to avoid hitting
or running over a child.
• Teach children to move away from a vehicle whenever it is started. 29
 MAINTENANCE & WARRANTY
Cleaning
• If dirt, rain or snow attaches to the camera, the display screen may not
clearly display objects. If water droplets, snow or mud adhere to
the camera lens, rinse with water and wipe with a dry cloth.
• Do not use alcohol, benzene or thinner to clean the camera. This will cause
discoloration. To clean the camera, wipe with a clean cloth dampened
with mild cleaner diluted with water and then wipe with a dry cloth.
Warranty

YADA LIMITED WARRANTY

YADA warrants, to the original purchaser, that its products are free from
defects in material and workmanship for 1 year from the date of original
purchase. Where permitted by law, YADA’s liability shall be limited to that set
forth in this limited express warranty. This limited express warranty shall be
the exclusive remedy of the purchaser and YADA makes no other warranty
of any kind aside from the limited express warranty stated above.
NOTE: Warranty only applies for North American customers of purchases
made in North America.

CONDITIONS OF WARRANTY
If during the 1 year warranty period your new product is found to be
defective, YADA will repair such defect, or replace the product, without
charge for parts or labor subject to the following conditions:
1. All repairs must be performed by YADA.
2. All warranty claims must be accompanied by a copy of the sales
30 receipt or bill of sale.
3. The equipment must not have been altered or damaged through
negligence, accident, improper operation, or failure to follow the
product instructions for installation, use, or care.
4. The replacement of parts is excluded from the warranty when
replacement is necessary due to normal wear and tear.
5. Repair or replacement parts supplied by YADA under this warranty are
protected only for the unexpired portion of the original warranty.
6. This is a “repair or replace” warranty only, and does not cover the costs
incurred for the installation, removal or reinstallation of the product, or
damage to any mobile phone device or vehicle.

OWNER’S RESPONSIBILITIES:
YADA will make every effort to provide warranty service within a reasonable
period of time. SHOULD YOU HAVE ANY QUESTIONS ABOUT SERVICE
RECEIVED OR IF YOU WOULD LIKE ASSISTANCE IN OBTAINING SERVICE,
PLEASE CALL TOLL FREE 1.866.294.9244 DURING REGULAR BUSINESS
HOURS MONDAY THROUGH FRIDAY 8:00 AM TO 5:00PM.

NOTE: Toll Free # is for North America Customers ONLY. See Customer
service section for customer contact numbers for other regions/offices.

For customer service and technical support, please call us at

1.866.294.9244. If at that time it is determined that a replacement unit is
needed, the support representative will issue a Return Authorization and
instruct on how to get a new unit.
YADA makes no other warranty of any kind aside from the limited express
warranty stated herein.

31
 DISCLAIMER OF WARRANTIES, INCLUDING WARRANTY OF
MERCHANTABILITY AND WARRANTY OF FITNESS FOR PARTICULAR
PURPOSE: EXCEPT AS SPECIFICALLY SET FORTH HEREIN, NO
WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIES, IS MADE
AS TO THE BEON™ CAMERA. EXCEPT AS EXPRESSLY SET FORTH
HEREIN, YADA AND/OR ITS AFFILIATES EXPRESSLY DISCLAIMS,
WITHOUT LIMITATION, ANY STATUTORY WARRANTIES AND ALL
IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

YADA and/or its affiliates do not guarantee or promise that the user of
BEON™ camera will not be in an accident or otherwise not collide with an
object and/or person. Our BEON™ camera is not intended in any way to be a
substitute for careful and cautious driving or for the consistent adherence to
all applicable traffic laws and motor vehicle safety regulations.

The BEON™ camera is not intended to be a substitute for rearview mirrors

or for any other motor vehicle equipment mandated by law. Even when
properly installed, our BEON™ camera has a limited field of vision and does
not provide a comprehensive view of the rear area of the vehicle.

YADA and/or its affiliates are not responsible for a user’s intended or actual
use of the BEON™ camera. In no event shall YADA and/ or its affiliates
have any liability for any losses (whether direct or indirect, in contract, tort
or otherwise) incurred in connection with the BEON™ camera, including but
not limited to damaged property, personal injury and/or loss of life. Neither
shall YADA and/or its affiliates have any liability for any decision, action or
inaction taken by any person in reliance on the BEON™ camera, or for any
delays, inaccuracies and/or errors in connection with the BEON™ camera
32 and its functioning.
YADA and/or its affiliates shall have no responsibility or liability for damage
and/or injury resulting from accidents occurring with vehicles having the
installed, and YADA and/or its affiliates, the manufacturer, distributor
and seller shall not be liable for any injury, loss or damage, incidental or
consequential, arising out of the use or intended use of the product.

GENERAL INFORMATION
Customer Service/Contact
IF YOU ARE EXPERIENCING ANY ISSUES WITH THE PRODUCT
DURING OPERATION, DO NOT RETURN THE PRODUCT TO THE STORE.
CONTACT YADA DIRECTLY FOR INSTRUCTIONS ON HOW TO RETURN/
EXCHANGE THE PRODUCT.
FCC Compliance Statement:
This device complies with Part 15 of the FCC rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
WARNING: Changes or modifications to this unit not expressly approved
by the party responsible for compliance could void the user’s authority to
operate the equipment. The manufacturer is not responsible for any radio
or TV interference caused by unauthorized modifications or change to this
equipment. Such modifications or change could void the user’s authority to
operate the equipment.

NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules. 33
 These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.

This device was tested for typical body-worn operations. To comply with RF
exposure requirements, a minimum separation distance of 1.5 cm must be
maintained between the user’s body and the handset, including the antenna.
Third-party belt-clips, holsters, and similar accessories used by this device
should not contain any metallic components. Body-worn accessories
that do not meet these requirements may not comply with RF exposure
requirements and should be avoided. Use only the supplied or an approved
antenna.
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate
(DEHP) and Diisononyl Phthalate (DINP), which are known to the State of California to cause
cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov.

3M VHB™ is a trademark of 3M Company.

Android is a trademark of Google Inc.
34 iPhone, iPad, Mac and iPod touch are trademarks of Apple Inc.
BEONTM
Capture Cam
BEON
Responsible Party:
YADA
2975 Red Hill Ave., Ste. 100,
Costa Mesa, CA 92626
Tel: 1.866.294.9244

35
36
 Product code / Code de produit / Código del producto :
BEONBK/BEONWH
Register this product within 30 days of purchase to receive one (1) additional year of warranty
coverage (beyond the standard 1-year warranty), along with special product offers and announcements.
Enregistrez ce produit dans les 30 jours suivant l’achat pour recevoir une couverture supplémentaire
de 1 AN (au-delà de la garantie standard d’un an), ainsi que des offres et des annonces spéciales.
Registre este producto dentro de los 30 días siguientes a la compra para recibir un (1) año adicional
de cobertura de garantía (más allá de la garantía estándar de un año), junto con ofertas de productos
y anuncios especiales.
www.letsyada.com/register @letsyada

Please contact our customer service before returning this product

to the store. Our friendly representatives are happy to help with
any questions or concerns you have.

Veuillez communiquer avec notre service à la clientèle avant de

retourner le produit au magasin. Nos représentants se feront un
plaisir de vous assister pour toute question ou préoccupation.

Póngase en contacto con nuestro servicio a clientes antes

de regresar este producto a la tienda. A nuestros amables
representantes les dará mucho gusto ayudarle con cualquier
pregunta o inquietud que tenga.

Mon-Fri, 8am-5pm PST / Lundi au vendredi, 8h à 17h HNP /

Lun-vie, 8 a. m. a 5 p. m. Hora del Pacífico
[email protected] / 1.866.294.9244
37
 CONNECT
WITH US @letsyada
2975 Red Hill Ave., Ste. 100, Costa Mesa, CA 92626
1.866.294.9244 | [email protected]
© 2024 ADC Solutions Auto, LLC.

www.letsyada.com

ML-BEONE_V1